Search Results

Search found 3589 results on 144 pages for 'hp mini'.

Page 13/144 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

  • hp DL380 G4 won't boot with disk plugged into front USB

    - by Kev
    We outgrew a few older external USB backup drives, and purchased WD My Passport 1 TB USB 3.0 drives to replace them. When they are plugged into the front of our G4, it will blink forever after the BIOS (which is current, BTW) and never boot, even though the USB disks are not "bootable" per se. Our old drives did not exhibit this behaviour (so I don't think it's this type of issue that I've read about other servers.) The old drives were USB 2.0, but this shouldn't make a difference, AFAICT--the specs say all of the G4's USB ports are the same, 2.0, anyway, so I'm not sure how one port would handle a USB 3.0 device better than another. If we plug the new drives in one of the back slots, it boots fine. What's the cause? My concern is that the front USB port, and possibly the motherboard, might be starting to die. (We are experiencing other strange issues with them, or were initially, like intermittent file permissions errors despite wide-open ACL on these local drives, but some serverfault users have me convinced they may be coincidental software/security related issues.)

    Read the article

  • HP Media Smart remote access

    - by Coov
    I just purchased this box for home backups for my pc's and mac's. Everything works great accept for the remote access part. I can RD into the machine locally but I can't get to it from outside of my network. I've enabled port forwarding on my router but it doesn't seem to matter. I checked with Qwest and they don't block these ports so I'm at a loss. I do have Vonage in front of my router but I've taken it out and it didn't make a difference. I suspect I've made an error with my router setup. I'm a programmer and I'm playing in the world of the unknown here. I'm lost. Any suggestions?

    Read the article

  • HP Officejet 7410 AIO: Scanning/copying output is a solid black field

    - by William
    I recently tried to breathe some life back into an old Officejet 7410 for my parents. The printing is fine, but the scanning and the copying respectively produce images and copies that are mostly solid black, except for the first inch or so from the top of the original page. At first I thought this was a bulb problem, so I replaced it. Unfortunately, the problematic behavior is still there. I've tried resetting to factory defaults. Still no improvement. I don't think this is related to my OS or drivers, since the copying is also affected even when the connected computer is powered off. So... my question(s): What is the cause of this bad behavior? Given that, can my Officejet be repaired? If so, how? Thanks in advance.

    Read the article

  • Hp pavilion dv7 power button

    - by Danny B
    My power button is non responsive I am getting LED for charging. I've taken it apart before to change the dc jack and it was fine and a few months later it just powered off. I try to power back on and is goes to start up then shuts off. I just took it apart and came to find the ribbon cable connecting the power button/speakers cover is barely hanging on do I have to replace the whole thing or is there a way to replace the ribbon cable?

    Read the article

  • HP PAVILION NOTEBOOK PC DV6880 Blue Screen

    - by NaV
    Environment : Win-Vista 64 BIT Graphics Processor / Vendor NVIDIA GeForce 8400M GS Video Memory 256 MB Total Available Graphics Memory 1535 MB What happens is, i can use the laptop in "basic theme" ONLY, the moment i enable any aero theme, the screen tears up, discoloration appears & then laptop freezes. Sometimes its reboot itself with Blue Screen shows up the gfx card error. Any way around, highly appreciated.

    Read the article

  • Live cd and usb install failure blank screen when trying to install on an HP Pavilion dv6

    - by Ajian
    I recently bought a new computer, and have been trying to install linux on it, 11.10 x64. It is a HP pavilion dv6-6117dx. 2.4GHz/1.5GHz VISION A8 Technology from AMD with AMD Quad-Core A8-3500M Accelerated Processor AMD Radeon HD 6620G Discrete-Class Graphics I am pretty sure i picked a unsupported graphics card or something. I have tried booting from usb as well, but the screen becomes blank after rebooting.

    Read the article

  • How do I enable wireless on HP Pavilion dm1?

    - by Dikla
    My wireless network is physically enabled and the "enable wireless" appears properly on the top menu, however checking it doesn't seem to have any affect. Anyone came across this problem? I have a new HP Pavilion dm1-4000, installed Ubuntu 11.10 yesterday. The wireless worked fine yesterday, today I've got nothing. It also seems to have problems with the wired connection, however I have no idea if it's related.

    Read the article

  • Opera Mini 7 launch to turn Java ME phones into smart browser phones

    - by hinkmond
    Here's a good way to smarten up your Java ME smart-challenged phone. Use the new Opera Mini 7 browser to view your personalized "Smart Page". See: Opera Mini 7 w/Java ME Here's a quote: The browser comes with a new feature called 'Smart Page'... a one-page summary of all the news from your Facebook and Twitter feeds. In addition to showing your friends' status updates and tweets, Smart Page will offer up suggestions for news sites to follow, and... save you the hassle of manually typing Web addresses into your mobile keyboard. ... Opera Mini 7 is available as a free download for Java-compatible (J2ME), Nokia S60, and Blackberry devices at m.opera.com That's smart! Using Java ME means you don't have to deal with those other platforms. Hinkmond

    Read the article

  • Does the Ubuntu mini.iso work with EFI?

    - by jean388
    I have to install Ubuntu 11.10 from the AMD64 mini.iso on a system with UEFI BIOS motherboard. I have configured a virtual machine in VirtualBox for making a test install before I setup the real system. In VirtualBox I have enabled EFI. When the virtual machine is powered on and boot mini.iso the Grub commandline is shown. If I try to boot the normal Ubuntu CD it works fine and I get the normal boot options "Install Ubuntu" etc. Does Ubuntu mini.iso not work with EFI?

    Read the article

  • Can a Google Search Appliance / Mini output JSON/JSONP?

    - by Riley
    Using Google Mini for a website that needs output from the Google Mini in a JSON/JSONP format for front-end querying purposes. Google Mini does publish an XML feed that could potentially be used by a middle process to convert to JSON/JSONP. Can Google Search Appliance / Mini output to JSON/JSONP using a plug-in, modification to an XSLT template, or other unknown method?

    Read the article

  • How to record my voice on a Mac Mini with headphones?

    - by user718408
    I'm try to record my voice via the headphone on a Mac Mini, but it's not working. I saw on Apple's site that the Mac Mini can record voice, but it doesn't seem to be working for me. Here is a hardware overview: Model Name: Mac Mini Model Identifier: Macmini3,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.26 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 3 MB Memory: 4 GB Audio: Make: Intel High Definition Audio Audio ID: 65 Headphone connection: Combination Output Line Input connection: Combination Input Speaker connection: Internal S/PDIF Optical Digital Audio Output connection: Combination Output S/PDIF Optical Digital Audio Input connection: Combination Input Any ideas how I can successfully get recording working?

    Read the article

  • Mac Mini monitor on the move – can I use VNC or a portable monitor?

    - by Jjunju
    I have been investigating the possibility of using my PC to control my soon to arrive Mac Mini when on the move. I can't afford and hope you don't give me answers suggesting buying a MacBook. My Mac Mini is the high end type. Now I have seen that the only viable option seems to be VNC. But how does this work if I am not on a network? Does VNC work with an ad-hoc network? Can a PC be connected to a Mac on such a network? Can this network be configured once at home and then be available on startup on the move? If I have an iPhone, can I use it as my wifi? But then, how would I start the Mac Mini to make the connection, since it wouldn't have a screen on the move? Finally, are there any small portable screens one can carry in a bag?

    Read the article

  • How to upgrade OS on Mac Mini with external USB Drive?

    - by David
    We have a G4 Mac Mini, circa 2005, running Mac OS X 10.4 Tiger, and we want to upgrade to 10.5 Leopard. We have a Leopard install disk, but the optical drive in this mini is broken. So we transferred the install disk image to a USB HDD, but now we can't figure out how to boot off it. From what I've read in Mac forums, some PPC Macs, including some G4's, have been able to boot from USB, even though it sounds like this wasn't officially supported, and it may well depend on the specific model of USB drive and Mac. My Mac says CPU is "PowerPC G4 (1.2)" and Boot ROM is "4.8.9f4". I was hoping I might just find somebody here who had that same Mac Mini and find out if they could make it work. I'd especially like to know any specifics about the USB drive they found success with. Any insights at all would be appreciated. Thanks.

    Read the article

  • How can I access my mini-pc (RaspberryPi / MK802 / Mele A1000 / VIA APC) via ethernet/wifi without having Monitor?

    - by sky770
    Soon I will be getting my own mini-PC (RaspberryPi / MK802 / Mele A1000 / VIA APC). But I was wondering whether is there any possibility that I can just power up and access my mini-pc's OS by connecting it to wifi/ethernet link and remotely access it over the LAN without actually needing a monitor (throughout the process?) ? I currently own a laptop and need a download box and later will be getting a HDTV for converting to a HTPC :D So, I don't really own a spare monitor now but I do have an extra keyboard and mouse. Is there exists any linux distro for the same? which I can use to directly fireup my mini-pc and hook it up across my LAN to remotely access through my laptop? Any suggestions appreciated :) Regards, sky770

    Read the article

  • How do I fix an overheating problem with an HP ENVY-4 ultrabook?

    - by ashutosh jain
    I have bought a new HP ENVY-4 ultrabook. It has an i5 processor, preinstalled windows7 and 2GB radeon graphics card. What happened was when I started using ubuntu it showed overheating. I ignored it but after a few days it burnt my laptop battery to 0% capacity. It was just one month old so I got the battery replaced for free. I tried installing linux mint but it also showed overheating. I tried fedora17 but it didn't installed fine. On windows it is running perfectly fine and it's not even heating a bit. Now anyone please suggest whats the problem with ubuntu and how can I overcome with it. I am a computer science guy so I can't work without linux and this machine is then like a waste for me.

    Read the article

  • Can not print after upgrading from 12.x to 14.04

    - by user318889
    After upgrading from V12.04 to V14.04 I am not able to print. I am using an HP LaserJet 400 M451dn. The printer troubleshooter told me that there is no solution to the problem. This is the output of the advanced diagnositc output. (Due to limited space I cut the output!) Can anybody tell me what is going wrong. I am using the printer via USB ? Page 1 (Scheduler not running?): {'cups_connection_failure': False} Page 2 (Is local server publishing?): {'local_server_exporting_printers': False} Page 3 (Choose printer): {'cups_dest': , 'cups_instance': None, 'cups_queue': u'HP-LaserJet-400-color-M451dn', 'cups_queue_listed': True} Page 4 (Check printer sanity): {'cups_device_uri_scheme': u'hp', 'cups_printer_dict': {'device-uri': u'hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670', 'printer-info': u'Hewlett-Packard HP LaserJet 400 color M451dn', 'printer-is-shared': True, 'printer-location': u'Pinatubo', 'printer-make-and-model': u'HP LJ 300-400 color M351-M451 Postscript (recommended)', 'printer-state': 4, 'printer-state-message': u'', 'printer-state-reasons': [u'none'], 'printer-type': 8556636, 'printer-uri-supported': u'ipp://localhost:631/printers/HP-LaserJet-400-color-M451dn'}, 'cups_printer_remote': False, 'hplip_output': (['', '\x1b[01mHP Linux Imaging and Printing System (ver. 3.14.6)\x1b[0m', '\x1b[01mDevice Information Utility ver. 5.2\x1b[0m', '', 'Copyright (c) 2001-13 Hewlett-Packard Development Company, LP', 'This software comes with ABSOLUTELY NO WARRANTY.', 'This is free software, and you are welcome to distribute it', 'under certain conditions. See COPYING file for more details.', '', '', '\x1b[01mhp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670\x1b[0m', '', '\x1b[01mDevice Parameters (dynamic data):\x1b[0m', '\x1b[01m Parameter Value(s) \x1b[0m', ' ---------------------------- ----------------------------------------------------------', ' back-end hp ', " cups-printers ['HP-LaserJet-400-color-M451dn'] ", ' cups-uri hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670 ', ' dev-file ', ' device-state -1 ', ' device-uri hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670 ', ' deviceid ', ' error-state 101 ', ' host ', ' is-hp True ', ' panel 0 ', ' panel-line1 ', ' panel-line2 ', ' port 1 ', ' serial CNFF308670 ', ' status-code 5002 ', ' status-desc ', '\x1b[01m', 'Model Parameters (static data):\x1b[0m', '\x1b[01m Parameter Value(s) \x1b[0m', ' ---------------------------- ----------------------------------------------------------', ' align-type 0 ', ' clean-type 0 ', ' color-cal-type 0 ', ' copy-type 0 ', ' embedded-server-type 0 ', ' fax-type 0 ', ' fw-download False ', ' icon hp_color_laserjet_cp2025.png ', ' io-mfp-mode 1 ', ' io-mode 1 ', ' io-support 6 ', ' job-storage 0 ', ' linefeed-cal-type 0 ', ' model HP_LaserJet_400_color_M451dn ', ' model-ui HP LaserJet 400 Color m451dn ', ' model1 HP LaserJet 400 Color M451dn ', ' monitor-type 0 ', ' panel-check-type 0 ', ' pcard-type 0 ', ' plugin 0 ', ' plugin-reason 0 ', ' power-settings 0 ', ' ppd-name lj_300_400_color_m351_m451 ', ' pq-diag-type 0 ', ' r-type 0 ', ' r0-agent1-kind 4 ', ' r0-agent1-sku CE410A/CE410X ', ' r0-agent1-type 1 ', ' r0-agent2-kind 4 ', ' r0-agent2-sku CE411A ', ' r0-agent2-type 4 ', ' r0-agent3-kind 4 ', ' r0-agent3-sku CE413A ', ' r0-agent3-type 5 ', ' r0-agent4-kind 4 ', ' r0-agent4-sku CE412A ', ' r0-agent4-type 6 ', ' scan-src 0 ', ' scan-type 0 ', ' status-battery-check 0 ', ' status-dynamic-counters 0 ', ' status-type 3 ', ' support-released True ', ' support-subtype 2202411 ', ' support-type 2 ', ' support-ver 3.12.2 ', " tech-class ['Postscript'] ", " tech-subclass ['Normal'] ", ' tech-type 4 ', ' usb-pid 3882 ', ' usb-vid 1008 ', ' wifi-config 0 ', '\x1b[01m', 'Status History (most recent first):\x1b[0m', '\x1b[01m Date/Time Code Status Description User Job ID \x1b[0m', ' -------------------- ----- ---------------------------------------- -------- --------', ' 08/21/14 00:07:25 5012 Device communication error richard 0 ', ' 08/20/14 13:42:44 500 Started a print job richard 4214 ', '', '', 'Done.', ''], ['\x1b[35;01mwarning: No display found.\x1b[0m', '\x1b[31;01merror: hp-info -u/--gui requires Qt4 GUI support. Entering interactive mode.\x1b[0m', '\x1b[31;01merror: Unable to communicate with device (code=12): hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670\x1b[0m', '\x1b[31;01merror: Error opening device (Device not found).\x1b[0m', ''], 0), 'is_cups_class': False, 'local_cups_queue_attributes': {'charset-configured': u'utf-8', 'charset-supported': [u'us-ascii', u'utf-8'], 'color-supported': True, 'compression-supported': [u'none', u'gzip'], 'copies-default': 1, 'copies-supported': (1, 9999), 'cups-version': u'1.7.2', 'device-uri': u'hp:/usb/HP_LaserJet_400_color_M451dn?serial=CNFF308670', 'document-format-default': u'application/octet-stream', 'document-format-supported': [u'application/octet-stream', u'application/pdf', u'application/postscript', u'application/vnd.adobe-reader-postscript', u'application/vnd.cups-command', u'application/vnd.cups-pdf', u'application/vnd.cups-pdf-banner', u'application/vnd.cups-postscript', u'application/vnd.cups-raw', u'application/vnd.samsung-ps', u'application/x-cshell', u'application/x-csource', u'application/x-perl', u'application/x-shell', u'image/gif', u'image/jpeg', u'image/png', u'image/tiff', u'image/urf', u'image/x-bitmap', u'image/x-photocd', u'image/x-portable-anymap', u'image/x-portable-bitmap', u'image/x-portable-graymap', u'image/x-portable-pixmap', u'image/x-sgi-rgb', u'image/x-sun-raster', u'image/x-xbitmap', u'image/x-xpixmap', u'image/x-xwindowdump', u'text/css', u'text/html', u'text/plain'], 'finishings-default': 3, 'finishings-supported': [3], 'generated-natural-language-supported': [u'en-us'], 'ipp-versions-supported': [u'1.0', u'1.1', u'2.0', u'2.1'], 'ippget-event-life': 15, 'job-creation-attributes-supported': [u'copies', u'finishings', u'ipp-attribute-fidelity', u'job-hold-until', u'job-name', u'job-priority', u'job-sheets', u'media', u'media-col', u'multiple-document-handling', u'number-up', u'output-bin', u'orientation-requested', u'page-ranges', u'print-color-mode', u'print-quality', u'printer-resolution', u'sides'], 'job-hold-until-default': u'no-hold', 'job-hold-until-supported': [u'no-hold', u'indefinite', u'day-time', u'evening', u'night', u'second-shift', u'third-shift', u'weekend'], 'job-ids-supported': True, 'job-k-limit': 0, 'job-k-octets-supported': (0, 470914416), 'job-page-limit': 0, 'job-priority-default': 50, 'job-priority-supported': [100], 'job-quota-period': 0, 'job-settable-attributes-supported': [u'copies', u'finishings', u'job-hold-until', u'job-name', u'job-priority', u'media', u'media-col', u'multiple-document-handling', u'number-up', u'output-bin', u'orientation-requested', u'page-ranges', u'print-color-mode', u'print-quality', u'printer-resolution', u'sides'], 'job-sheets-default': (u'none', u'none'), 'job-sheets-supported': [u'none', u'classified', u'confidential', u'form', u'secret', u'standard', u'topsecret', u'unclassified'], 'jpeg-k-octets-supported': (0, 470914416), 'jpeg-x-dimension-supported': (0, 65535), 'jpeg-y-dimension-supported': (1, 65535), 'marker-change-time': 0, 'media-bottom-margin-supported': [423], 'media-col-default': u'(unknown IPP value tag 0x34)', 'media-col-supported': [u'media-bottom-margin', u'media-left-margin', u'media-right-margin', u'media-size', u'media-source', u'media-top-margin', u'media-type'], 'media-default': u'iso_a4_210x297mm', 'media-left-margin-supported': [423], 'media-right-margin-supported': [423],

    Read the article

  • Which Ubuntu version should I use for my HP Envy Ultrabook?

    - by paall
    Which Ubuntu version should I use for my HP Envy Ultrabook? Is there any specific Ubuntu version recommended for ultrabooks? Because when I installed Ubuntu 10.04 and 11.04, the process could not identify my disk. And when I installed Ubuntu 12.04 using Wubi, I could not switch back and forth between Ubuntu and Windows because after switching back from windows to Ubuntu, a command prompt was shown with some unknown error. I need to use Linux for my daily work. So any help would be really appreciated.

    Read the article

  • HP and Microsoft: That&rsquo;s What Friends Are For ?

    - by andrewbrust
    Today, HP pre-announced the second coming out for its recently acquired Palm webOS mobile operating system.  I happen to think webOS is quite good, and when the Palm Pre first came out, I thought it a worthwhile phone.  I was worried though that the platform would never attract the developer mindshare it needed to be competitive, and that turned out to be the case.  But then HP acquired Palm and announced it would be revamping the webOS offering, not only on phones, but also on tablets.  It later announced that it would also use webOS as an embedded solution on HP printers. The timing of this came shortly after HP had announced it would be producing a “Slate” product running Windows 7. After the Palm deal, HP became vague about whether the Windows-powered slate would actually come out.  They did, in fact, bring the Slate 500 to market, but by some accounts, they only built 5000 units. Another recent awkward moment between HP and Microsoft: HP withdrew itself from the Windows Home Server ecosystem.  That one hurt, as they were the dominant OEM there.  But Microsoft’s decision to kill Drive Extender had driven away many parties, not just HP. On Wednesday, HP came out with their TouchPad, and new phone models.  Not a nice thing for Windows Phone 7, but other OEMs are taking a wait and see attitude there too, I suppose.  There was one more zinger though, and it was bigger: HP announced they’d be porting webOS to PCs. No Windows Phone 7? OK. No Windows Home Server?  Whatcha gonna do?  But no Windows 7 either?  From HP?  What comes after that, no ink and toner? Some people think Microsoft’s been around too long to be relevant.  But HP started out making oscilloscopes!  The notion that HP is too cool for Windows school is a it far-fetched.  This is the company that bought EDS. This is the company that bought Compaq.  And Compaq was the company that bought Digital Equipment Corporation.  Somehow, I don’t think the VT 220 outclasses Windows PCs. What could possibly be going on?  My sense is that HP wants to put webOS on PCs that also have Windows, and that people will buy because they have Windows.  And for every one of those sold, HP gets to count, technically speaking, another webOS unit in the install base.  webOS is really nice, as I said.  But being good isn’t good enough when you are trying to get market share.  Number of units shipped matters.  The question is whether counting PCs with webOS installed, but dormant, is helpful to HP’s cause.  Seems like a funny way to account for market share, and a strange way to treat a big partner in Redmond.

    Read the article

  • Wireless drops on HP ENVY dv6 with RT3290 wireless, worked without problem prior to upgrading to Ubuntu 13.10, can it be fixed?

    - by Tim
    I have a HP ENVY dv6 Notebook PC with an AMD A10 quad core and RT3290 wireless. Since I upgraded from Ubuntu 13.04 to 13.10, the wireless connects, but then drops after a few minutes or longer, whether or not I am running openconnect to get through a VPN. If I attempt to run a remote X client (e.g. remote xterm) it drops. If I don't run an X client, it disconnects after a while, requiring a reload of the driver and reconnect. Wireless info... sudo lshw -c network *-network description: Wireless interface product: RT3290 Wireless 802.11n 1T/1R PCIe vendor: Ralink corp. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 68:94:23:a7:09:cb width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=3.11.0-12-generic firmware=0.37 ip=192.168.1.115 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:55 memory:f0210000-f021ffff I have successfully built and installed the MediaTek driver with no luck on connecting, then the system hangs on reboot and I have to recover/undo the changes to boot successfully.

    Read the article

  • Built-in card-reader doesn't work. HP Compaq nx6325 notebook

    - by user10940
    I have a HP-Compaq nx6325 notebook with an built-in card-reader (SD, MS/Pro, MMC, SM, XD) and the ubuntu (10.10.) don't see it. I've tried to install it manually, with this steps (and with this tifmxx driver), but doesn't work. The compile log: $ echo /home/tvera/downloads/cr_install /home/tvera/downloads/cr_install $ make -C /lib/modules/2.6.35-25-generic/build M=/home/tvera/downloads/cr_install make[1]: Entering directory `/usr/src/linux-headers-2.6.35-25-generic' CC [M] /home/tvera/downloads/cr_install/tifm_core.o In file included from /home/tvera/downloads/cr_install/tifm_core.c:12: /home/tvera/downloads/cr_install/linux/tifm.h:128: error: field ‘cdev’ has incomplete type /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_uevent’: /home/tvera/downloads/cr_install/tifm_core.c:69: warning: passing argument 1 of ‘add_uevent_var’ from incompatible pointer type include/linux/kobject.h:244: note: expected ‘struct kobj_uevent_env *’ but argument is of type ‘char **’ /home/tvera/downloads/cr_install/tifm_core.c:69: warning: passing argument 2 of ‘add_uevent_var’ makes pointer from integer without a cast include/linux/kobject.h:244: note: expected ‘const char *’ but argument is of type ‘int’ /home/tvera/downloads/cr_install/tifm_core.c: At top level: /home/tvera/downloads/cr_install/tifm_core.c:161: warning: initialization from incompatible pointer type /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_free’: /home/tvera/downloads/cr_install/tifm_core.c:170: warning: type defaults to ‘int’ in declaration of ‘__mptr’ /home/tvera/downloads/cr_install/tifm_core.c:170: warning: initialization from incompatible pointer type /home/tvera/downloads/cr_install/tifm_core.c: At top level: /home/tvera/downloads/cr_install/tifm_core.c:177: error: unknown field ‘release’ specified in initializer /home/tvera/downloads/cr_install/tifm_core.c:178: warning: initialization from incompatible pointer type /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_alloc_adapter’: /home/tvera/downloads/cr_install/tifm_core.c:190: error: implicit declaration of function ‘class_device_initialize’ /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_add_adapter’: /home/tvera/downloads/cr_install/tifm_core.c:211: error: ‘BUS_ID_SIZE’ undeclared (first use in this function) /home/tvera/downloads/cr_install/tifm_core.c:211: error: (Each undeclared identifier is reported only once /home/tvera/downloads/cr_install/tifm_core.c:211: error: for each function it appears in.) /home/tvera/downloads/cr_install/tifm_core.c:212: error: implicit declaration of function ‘class_device_add’ /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_remove_adapter’: /home/tvera/downloads/cr_install/tifm_core.c:237: error: implicit declaration of function ‘class_device_del’ /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_free_adapter’: /home/tvera/downloads/cr_install/tifm_core.c:243: error: implicit declaration of function ‘class_device_put’ /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_alloc_device’: /home/tvera/downloads/cr_install/tifm_core.c:275: error: ‘struct device’ has no member named ‘bus_id’ /home/tvera/downloads/cr_install/tifm_core.c:275: error: ‘BUS_ID_SIZE’ undeclared (first use in this function) make[2]: *** [/home/tvera/downloads/cr_install/tifm_core.o] Error 1 make[1]: *** [_module_/home/tvera/downloads/cr_install] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-25-generic' make: *** [all] Error 2 The output of lsusb: Bus 001 Device 005: ID 05e3:0702 Genesys Logic, Inc. USB 2.0 IDE Adapter Bus 003 Device 003: ID 0458:003a KYE Systems Corp. (Mouse Systems) NetScroll+ Mini Traveler Bus 003 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

    Read the article

  • How to use a DVI/HDMI monitor with Mac Mini's DisplayPort?

    - by dr dork
    If I buy a Mac Mini, how can I use it with my Dell monitor? The Dell does not have a DisplayPort, only DVI and HDMI. I was looking at the Mac Minis and noticed they don't have DVI or VGA ports. Does the Mac Mini come with any kind of an adapter that will allow me to use my existing Dell monitor? Thanks in advance for your help, I'm going to start researching this question right now.

    Read the article

  • HP ProLiant DL980-Oracle TPC-C Benchmark spat

    - by jchang
    The Register reported a spat between HP and Oracle on the TPC-C benchmark. Per above, HP submitted a TPC-C result of 3,388,535 tpm-C for their ProLiant DL980 G7 (8 Xeon X7560 processors), with a cost of $0.63 per tpm-C. Oracle has refused permission to publish. Late last year (2010) Oracle published a result of 30M tpm-C for a 108 processors (sockets) SPARC cluster ($30M complete system cost). Oracle is now comparing this to the HP Superdome result from 2007 of 4M tpm-C at $2.93 per tpm-C, calling...(read more)

    Read the article

  • How do I disable alert beeps

    - by wheresrhys
    My HP pavilion laptop is getting pretty old and the speakers no longer work properly. So I've disabled all audio devices, including disabling the light-touch volume controls at boot-up. The one sound still here that I can't get rid of is teh alert beep whenever there's an error. It's annoying at the best of times, but when your laptop has no other sounds at all it's intensly irritating! Nothing I change in the windows settings or in the BIOS seems to have any effect. Any ideas how to switch them off?

    Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >