Search Results

Search found 909 results on 37 pages for 'ict sector'.

Page 13/37 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

• SD-CARD reader does not show in ubuntu

  - by shantanu

  I bought Acer asipre 4250. It have built-in SD card reader. But it is not working. Nothing show in /media or fdisk but something in dmesg. dmesg: new high-speed USB device number 3 using ehci_hcd [ 127.396733] scsi5 : usb-storage 2-2:1.0 [ 128.526562] scsi 5:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 [ 128.532512] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 129.008110] ohci_hcd 0000:00:12.0: PCI INT A disabled [ 129.032083] ohci_hcd 0000:00:13.0: PCI INT A disabled [ 129.056411] ohci_hcd 0000:00:16.0: PCI INT A disabled [ 129.338026] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 129.808328] ohci_hcd 0000:00:14.5: PCI INT C disabled [ 167.728616] usb 2-2: USB disconnect, device number 3 [ 169.872284] ehci_hcd 0000:00:13.2: PCI INT B disabled [ 169.872340] ehci_hcd 0000:00:13.2: PME# enabled fdisk -l: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0006bc6d Device Boot Start End Blocks Id System /dev/sda1 * 2048 48828415 24413184 7 HPFS/NTFS/exFAT /dev/sda2 48828416 50829311 1000448 82 Linux swap / Solaris /dev/sda3 50829312 99657727 24414208 83 Linux /dev/sda4 99659774 625141759 262740993 5 Extended Partition 4 does not start on physical sector boundary. /dev/sda5 99659776 275439615 87889920 7 HPFS/NTFS/exFAT /dev/sda6 275441664 451221503 87889920 7 HPFS/NTFS/exFAT /dev/sda7 451223552 625141759 86959104 7 HPFS/NTFS/exFAT I found another problem just right now. I format last three drives as EXT4 with disk utility. But they are showing as NTFS/exFAT in fdisk. :-(

  Read the article

• Ubuntu installation does not recognize drive partitioning

  - by Woltan

  I have a 1TB drive and installed Windows 7 on a 128GB partition. When I now try to install Ubuntu 11.04 it does not recognize the Windows partition but offers the complete 1TB drive to install Ubuntu on instead. It displays: However, in the Ubuntu Disk Utility the Windows partitions are recognized. What do I need to do in order for Ubuntu to recognize the Windows 7 partition and install Ubuntu as a dual boot? Response to comments The following commands were executed and the results are shown below: fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x34a38165 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 16318 130969600 7 HPFS/NTFS Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x14a714a6 Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 83 Linux parted -l Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: /dev/sr0: unrecognised disk label

  Read the article

• Disk failure is imminent Laptop Hard drive ~5 months old

  - by Drew

  There's another post about this, but I don't have enough 'points' to say anything on that thread. So I'll start my own ... with more details! My computer still boots, but gnome domain reports problems with HDD smart. This has been confirmed in the bios as it makes me press f1 to boot up now. I tried running HDD disk check in the bios, but it fails running the tests. As in, running the tests failed not that the tests themselves indicated a failed drive. Here is what disk utility is reporting as failing: Reallocated Sector Count FAILING Normalized: 132 Worst: 132 Threshold: 140 Value: 544 Current Pending Sector Count WARNING Normalized: 200 Worst: 1 Threshold: 0 Value: 2 Is this related to the insane number of DRDY errors on the drive? kernel: [51345.233069] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 kernel: [51345.233076] ata1.00: BMDMA stat 0x4 kernel: [51345.233081] ata1.00: failed command: READ DMA kernel: [51345.233090] ata1.00: cmd c8/00:00:00:8b:4a/00:00:00:00:00/e0 tag 0 dma 131072 in kernel: [51345.233092] res 51/40:00:a8:8b:4a/10:04:00:00:00/e0 Emask 0x9 (media error) kernel: [51345.233097] ata1.00: status: { DRDY ERR } kernel: [51345.233103] ata1.00: error: { UNC } kernel: [51345.291929] ata1.00: configured for UDMA/100 kernel: [51345.291944] ata1: EH complete kernel: [51347.682748] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 kernel: [51347.682754] ata1.00: BMDMA stat 0x4 kernel: [51347.682759] ata1.00: failed command: READ DMA kernel: [51347.682768] ata1.00: cmd c8/00:00:00:8b:4a/00:00:00:00:00/e0 tag 0 dma 131072 in kernel: [51347.682770] res 51/40:00:a8:8b:4a/10:04:00:00:00/e0 Emask 0x9 (media error) kernel: [51347.682774] ata1.00: status: { DRDY ERR } kernel: [51347.682777] ata1.00: error: { UNC } Did Ubuntu 10.10 and/or EXT4 eat my work laptop? What steps can I take to backup my important information, which is probably the home folder. Please include steps to recover my data on the new hard drive as well. It does me little good to have backups I can't use.

  Read the article

• My Android phone isn't being detected by Ubuntu

  - by Lara

  This is what I've got from terminal, looks like it can see the phone as a USB device just fine but isn't showing up under fdisk so I can't mount it. It automounts just fine in my VMWare Windows. And Internet tethering works fine while under Linux (haven't tried under Windows). Here's lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 019: ID 04d9:1135 Holtek Semiconductor, Inc. Bus 001 Device 003: ID 05ca:18c0 Ricoh Co., Ltd Bus 001 Device 004: ID 0489:e00f Foxconn / Hon Hai Foxconn T77H114 BCM2070 [Single-Chip Bluetooth 2.1 + EDR Adapter] Bus 003 Device 010: ID 04e8:6860 Samsung Electronics Co., Ltd Bus 002 Device 012: ID 046d:c315 Logitech, Inc. Classic New Touch Keyboard And here's sudo fdisk -l: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0001ff06 Device Boot Start End Blocks Id System /dev/sda1 2048 681845797 340921875 7 HPFS/NTFS/exFAT /dev/sda2 * 681846784 845686783 81920000 83 Linux /dev/sda3 845686784 968566783 61440000 7 HPFS/NTFS/exFAT /dev/sda4 968568830 972475081 1953126 5 Extended /dev/sda5 968568832 972475081 1953125 82 Linux swap / Solaris Disk /dev/mapper/cryptswap1: 2000 MB, 2000000000 bytes 255 heads, 63 sectors/track, 243 cylinders, total 3906250 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xbe4c2ec7 Disk /dev/mapper/cryptswap1 doesn't contain a valid partition table

  Read the article

• YouTube: Promotional AgroSense Movie

  - by Geertjan

  Here's a cool YouTube promotional movie on AgroSense created by Ordina in the Netherlands. AgroSense is an open source Java system for the precision agriculture industry, which won the IT Environment Award in the Netherlands last week: If your understanding of Dutch limits your appreciation of the movie above, here's a rough translation, together with the names of the speakers in the movie: Precision agriculture, an innovative form of agriculture in which local variations in soil, crop, and atmosphere are taken into account, is the high-tech sustainable agriculture of tomorrow. The use of fertilizer, water, and energy can in this way be significantly reduced. "If, ten or twenty years from now, we are to continue having our agricultural industry in good shape, and in a continuing state of health, we'll need to register and work with data because if we want to enable crops to provide higher value, we'll need to create higher levels of transparency throughout the agriculture chain." Lenus Hamster, farmer in Nieuwolda Groningen "Industry is becoming increasingly data intensive. By combining pragmatic usefulness with innovative sustainability, AgroSense offers the Netherlands the possibility to continue being a leading player in the agrofood sector." Art Lighthart, Architect at Ordina AgroSense offers an open source solution in which all services for precision agriculture are brought together. In 2012, co-operation is being sought with organizations to make AgroSense available to around 10,000 Dutch farmers in the arable crop sector. By the way, the last sentence above implies the NetBeans Platform will be used by around 10,000 Dutch farmers.

  Read the article

• Having issues using fdisk and GParted with Lexar 64GB USB, but reading and writing is fine

  - by MetaDark

  I have recently bought a new 64GB Lexar USB with the long model name of LJDV10-64G-000-106, and I am having issues partitioning it. I am able to mount, read and write to the USB without any issues but whenever I try to partition it with GParted it doesn't show up in the dropdown. Also while using the command sudo fdisk -l I receive the error fdisk: unable to seek on /dev/sdc: Invalid argument. This is a brand new USB so I am not sure why I am having these issues, especially since the device is functioning perfectly with read/write. I have tried reformatting it on a windows machine but that does not seem to do anything. For those who want a visual my USB looks almost exactly like But 64GB rather than 8GB Edit: I have just ran GParted from the terminal and I am getting a similar error, but it may give more information on the issue. Could not determine physical sector size for /dev/sdc. Using the logical sector size (512). Invalid argument during seek for read on /dev/sdc Also clearing my USB with /dev/zero fails with the the message $ sudo dd if=/dev/zero of=/dev/sdc bs=1M dd: writing `/dev/sdc': No space left on device 1+0 records in 0+0 records out 0 bytes (0 B) copied, 0.00167254 s, 0.0 kB/s

  Read the article

• Can't access external hard drives or thumb drives

  - by calden

  I am not a complete linux noob but I don't know a lot either and would greatly appreciate some help with this. I just installed Ubuntu 10.10 onto my laptop. Everything is working great however USB devices such as thumb drives and external hard drives wont show up. I have been looking around a bit and when I run sudo fdisk -l it displays this: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00065684 Device Boot Start End Blocks Id System /dev/sda1 * 1 29255 234983424 83 Linux /dev/sda2 29255 30402 9212929 5 Extended /dev/sda5 29255 30402 9212928 82 Linux swap / Solaris Disk /dev/sdb: 16.0 GB, 16026435072 bytes 64 heads, 32 sectors/track, 15283 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000df90d Device Boot Start End Blocks Id System /dev/sdb1 * 1 15283 15649776 7 HPFS/NTFS It does seem to display my 16 gig thumb drive but other then seeing it here I cant access it to read and write files to it. It does the same with my external hard drive. I know those devices work as I have tried them on my other computer and they are working fine. Also this is what is in fstab if this will help anybody help me: proc /proc proc nodev,noexec,nosuid 0 0 /dev/sdb1 / ext4 errors=remount-ro 0 1 /dev/sdb5 none swap sw 0 0 Thank you very much for the help everyone.

  Read the article

• Ubuntu installer does not show drives

  - by Tanweer Rashid

  I am trying to install Ubuntu 12.04 LTS on my Inspiron laptio, but the installer does not show any drives. My system has a 1TB SATA drive and a 32GB SSD. As far as I can figure, the boot files are kept on the SSD for fast startup (for Windows). During Win7 installation, I had to manually load drivers for RAID controller to see all available drives. Running fdisk -l from the live CD shows the following: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x234b4782 Device Boot Start End Blocks Id System /dev/sda1 63 80324 40131 de Dell Utility /dev/sda2 * 81920 41627647 20772864 7 HPFS/NTFS/exFAT /dev/sda3 41627648 357019647 157696000 7 HPFS/NTFS/exFAT /dev/sda4 357019648 1953517567 798248960 f W95 Ext'd (LBA) /dev/sda5 672415744 1312966655 320275456 7 HPFS/NTFS/exFAT /dev/sda6 1312968704 1953517567 320274432 7 HPFS/NTFS/exFAT Disk /dev/sdb: 32.0 GB, 32017047552 bytes 255 heads, 63 sectors/track, 3892 cylinders, total 62533296 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x234b474b Device Boot Start End Blocks Id System /dev/sdb1 2048 16775167 8386560 84 OS/2 hidden C: drive ubuntu@ubuntu:~$ In the Ubuntu installer, I can only choose /dev/sdb for "Device for boot loader installation", and sdb doesn't show any drives. I cannot select /dev/sda. Any ideas anyone? Thanks.

  Read the article

• Unable to mount NTFS Partition after resizing

  - by sam

  I was having only 15 GB space allocated to LINUX. I wanted to have more space available to linux. So I just re sized one of my ntfs partition using GParted. But after resizing I am not able to open the partition neither in Ubuntu nor in windows. OS: Dual Boot Win7/Ubuntu 10.10 The error message i get is the following: Error mounting: mount exited with exit code 12: Failed to read last sector (395458824): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS), or the NTFS boot sector is corrupt (NTFS size is not valid). Failed to mount '/dev/sda5': Invalid argument The device '/dev/sda5' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?

  Read the article

• Deleting Unused Swaps Partions

  - by Nikita Kononov

  Good evening everyone , I got a little issue with Swap Partitions. Due to some issues after installing Ubuntu first time, I reinstalled it and now I have 3 Swaps. Here is sudo fdisk -l result Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xaa9693fe Device Boot Start End Blocks Id System /dev/sda1 2048 52430847 26214400 1c Hidden W95 FAT32 (LBA) /dev/sda2 * 52430848 540677076 244123114+ 7 HPFS/NTFS/exFAT /dev/sda3 540678142 1465147391 462234625 5 Extended Partition 3 does not start on physical sector boundary. /dev/sda5 1452750848 1465147391 6198272 82 Linux swap / Solaris /dev/sda6 1440352256 1452742655 6195200 82 Linux swap / Solaris /dev/sda7 540678144 1427951615 443636736 83 Linux /dev/sda8 1427953664 1440339967 6193152 82 Linux swap / Solaris So Swaps in /dev/sda5 and /dev/sda6 are no longer in use as far as I understand and thus I was planning to delete them, however faced a problem. What I did is download and burn Gparted Live CD and boot it up, tried to delete those partitions but I have no idea how to add 12GB unallocated memory to the existing OS partition in this case to /dev/sda7 Is there anyway I can delete 2 swaps and extend unallocated memory to /dev/sda7 partion? Thank you in advance!

  Read the article

• SD Card only mounted after a reboot

  - by hattenn

  I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

  Read the article

• Unable to mount an LVM Hard-drive after upgrade

  - by Bruce Staples

  I imagine this is a basic gotcha ... but I can't see it. I have a system with 2(physical) harddrives. The boot system (/dev/sda) was running 10.04 & the second drive (/dev/sdb) was just a mounted filesystem. I did a clean load of Ubuntu 12.04 overwriting /dev/sda (not an upgrade) & now cannot mount the second drive. so I do not know what to enter it into the fstab ... I had expected to use: /dev/sdb /tera ext4 defaults 0 2 But even manual mounting fails (I also have tried various "-t" options on the off chance!) sudo mount -t ext4 /dev/sdb1 /tera mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Output from disk queries indicate that it is a Linux LVM & a healthy disk still. sudo lshw -C disk *-disk:0 description: ATA Disk product: WDC WD5000AACS-0 vendor: Western Digital physical id: 0 bus info: scsi@2:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WCASU1401098 size: 465GiB (500GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=00015a55 *-disk:1 description: ATA Disk product: WDC WD10EADS-00L vendor: Western Digital physical id: 1 bus info: scsi@3:0.0.0 logical name: /dev/sdb version: 01.0 serial: WD-WCAU47836304 size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sudo fdisk -l Disk /dev/sda: 500.1 GB, 500106780160 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976771055 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00015a55 Device Boot Start End Blocks Id System /dev/sda1 * 2048 972580863 486289408 83 Linux /dev/sda2 972582910 976769023 2093057 5 Extended /dev/sda5 972582912 976769023 2093056 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1953525167 976762583+ 8e Linux LVM LVM doesn't appear to be an option for mount or fstab. ... and here's a Smart data Screenshot from Disk Utility.

  Read the article

• Ubuntu installation does not recognize drive partinioning

  - by Woltan

  I have a 1TB drive and installed Windows 7 on a 128GB partition. When I now try to install Ubuntu 11.04 it does not recognize the Windows partition but offers the complete 1TB drive to install Ubuntu on instead. It displays: However, in the Ubuntu Disk Utility the Windows partitions are recognized. What do I need to do in order for Ubuntu to recognize the Windows 7 partition and install Ubuntu as a dual boot? Response to comments The following commands were executed and the results are shown below: fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x34a38165 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 16318 130969600 7 HPFS/NTFS Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x14a714a6 Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 83 Linux parted -l Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: /dev/sr0: unrecognised disk label

  Read the article

• Grub does not show a Windows 8 option after dual boot

  - by skytreader

  So, I've successfully dual-booted my Windows 8 machine with Ubuntu 12.04 . However, I still don't have a convenient method of choosing what OS to load at boot time. After installing Ubuntu, my computer still loads Windows 8 directly. I then added grubx64.efi to the white list of my boot loader. But after that, my machine loads Ubuntu directly without even a shadow of GRUB showing up! I used boot-repair and I got this paste.ubuntu URL: paste.ubuntu.com/1326074. After running boot-repair (and re-white listing the grubx64.efi file), GRUB now shows up but without any Windows 8 option! Lastly, I ran sudo fdisk -l and it gave me this: WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x6396389f Device Boot Start End Blocks Id System /dev/sda1 1 1465149167 732574583+ ee GPT Partition 1 does not start on physical sector boundary. I'm guessing my problem has something to do with the warning from fdisk above but I don't know what to do with it. How do I proceed now?

  Read the article

• Why does Ubuntu 13.10 not detect my Win7 partition?

  - by goutham

  I'm trying to install Ubuntu 13.10 alongside Windows 7 on my DELL INSPIRON 14z 5423 laptop and I'm new to all of this. I'm using the Ubuntu 13.10 64-bit ISO burned onto a CD. The first time I tried to install it, Ubuntu said it did not detect any other OS, which meant I only had 4 options: Erase disk and install Ubuntu (I don't want to do this) Encrypt new Ubuntu. Use LVM. Something else. If I choose the Something else option, it brings me to the partition menu and says that I have 1 disk with free space of (500Gb), but that's not true because I have Windows 7. I restarted the laptop several times and booted the CD again and I got exactly the same as I did previously. How do fix this problem and install Ubuntu alongside Windows 7? After executing "sudo fdisk -l" command in terminal ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd2b811c5 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 314574847 157184000 7 HPFS/NTFS/exFAT /dev/sda3 314574848 629147647 157286400 7 HPFS/NTFS/exFAT /dev/sda4 629147648 976771071 173811712 7 HPFS/NTFS/exFAT After removing one partition I executed command once again ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd2b811c5 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 629145599 314469376 7 HPFS/NTFS/exFAT /dev/sda3 629147648 976771071 173811712 7 HPFS/NTFS/exFAT

  Read the article

• Oracle is Child&rsquo;s Play&hellip;in NSW

  - by divya.malik

  A few weeks ago, my colleague Michael Seback posted a blog entry on Oracle’s acquisition of Haley.  We recently read  an interesting report from Down Under, and here was our press release on the  implementation of Oracle’s Policy automation software in New South Wales, which I thought I would share. We always love hearing about our software “at work”, and especially in the Public Sector- social services area, where it makes a big difference to people’s lives. Here were some of the reasons, why NSW chose Oracle software: “One of the things Oracle’s Policy Automation system is good at is allowing you take decision  trees and rules that are obviously written in English and code them up using very much a natural language approach,” said Holling (CIO for Human Services). “So it was quite a short process to translate the final set of rules that were written on paper into business rules that were actually embedded in the system.” “Another reason why we chose Oracle’s Automation tool is because with future versions of Siebel it comes very tightly integrated with that. It allows us to then to basically take the results of the Policy Automation survey and actually populate our client management system database with that information,” said Holling. As per Surend Dayal, North America VP, Oracle’s Policy automation has applications across a wide range of industries, including public sector—especially health and human services—also financial services, insurance, and even airline rewards programs. In other words, any business process that requires consistent, accurate decision-making where complex legislation and/or internal policies are involved. Click here to read more about Oracle and Haley.

  Read the article

• Why do I get disk I/O errors booting the 3.2 kernel on a xen vps server?

  - by Doug

  I have a xen vps, which I just upgraded to the new LTS 12 Precise Pangolin. However, I see this error on booting: [ 12.848076] end_request: I/O error, dev xvda, sector 12841 [ 12.848093] end_request: I/O error, dev xvda, sector 12841 [ 12.848103] Buffer I/O error on device xvda1, logical block 1605 [ 12.848110] lost page write due to I/O error on xvda1 [ 12.848129] Aborting journal on device xvda1. Results in / being mounted read-only. Reboot: [ 3.087257] EXT3-fs (xvda1): warning: ext3_clear_journal_err: Marking fs in need of filesystem check. [ 3.087677] EXT3-fs (xvda1): recovery complete [ 3.088514] EXT3-fs (xvda1): mounted filesystem with ordered data mode Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. fsck from util-linux 2.20.1 PRGMRDISK1 contains a file system with errors, check forced. Checking disk drives for errors. This may take several minutes. Press C to cancel all checks in progress PRGMRDISK1: ***** REBOOT LINUX ***** PRGMRDISK1: 371152/6001184 files (2.8% non-contiguous), 4727949/12000000 blocks mountall: fsck / [308] terminated with status 3 mountall: System must be rebooted: / [ 151.566949] Restarting system. Name ID Mem VCPUs State Time(s) shadowmint 236 2048 1 --p--- 0.0 Reboot - back to 1. This is definitely an issue with the 3.2 kernel, because booting the 3.0.0 or 2.6.38 kernel series make this issue magically disappear. I'm certain this is some kind of weird xen thing, but no idea. Anyone? Anyhow, until this is resolve I strongly recommend against upgrading if you're running a xen server.

  Read the article

• Banshee gapless playback does not work when playing mp3s

  - by ComputerGuy505

  Even though I have gapless playback enabled in Banshee's settings menu, there is a very short pause between songs. This might be due to the fact that my hard drive's partitions seem wierd. fdisk -l produces this output: Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x4a73c3cb Device Boot Start End Blocks Id System /dev/sda1 * 2048 409599 203776 7 HPFS/NTFS/exFAT /dev/sda2 409600 724153740 361872070+ 7 HPFS/NTFS/exFAT /dev/sda3 1456826368 1465145343 4159488 c W95 FAT32 (LBA) /dev/sda4 724154366 1456826367 366336001 5 Extended Partition 4 does not start on physical sector boundary. /dev/sda5 1440159744 1456826367 8333312 82 Linux swap / Solaris /dev/sda6 724154368 1440159743 358002688 83 Linux Partition table entries are not in disk order Playing mp3's from /dev/sda2 or /dev/sda6 produces this problem. I don't seem to have gapless playback on Rhythmbox or Clementine either, if those media players are supposed to have it. I'm not sure what other info to provide. This is just annoying to me. Thanks for any help.

  Read the article

• SD Card only mounted after a reboot

  - by evothur

  Hi everyone. I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

  Read the article

• More efficient in range checking

  - by Mob

  I am going to use a specific example in my question, but overall it is pretty general. I use java and libgdx. I have a ship that moves through space. In space there is debris that the ship can tractor beam in and and harvest. Debris is stored in a list, and the object contains it own x and y values. So currently there is no way to to find the debris's location without first looking at the debris object. Now at any given time there can be a huge (1000+) amount of debris in space, and I figure that calculating the distance between the ship and every single piece of debris and comparing it to maximum tractor beam length is rather inefficient. I have thought of dividing space into sectors, and have each sector contain a list of every object in it. This way I could only check nearby sectors. However this essentially doubles memory for the list. (I would reference the same object so it wouldn't double overall. I am not CS major, but I doubt this would be hugely significant.) This also means anytime an object moves it has to calculate which sector it is in, again not a huge problem. I also don't know if I can use some sort of 2D MAP that uses x and y values as keys. But since I am using float locations this sounds more trouble than its worth. I am kind of new to programming games, and I imagined there would be some eloquent solution to this issue.

  Read the article

• Are Windows partitions gone?

  - by Gigili

  I had Windows 7 on my laptop (factory setting), because of some performance issues, I decided to use recovery options to restore it to its factory condition but I don't know what has happened or what I have done that the whole operating system was gone after playing around with recovery options from the boot menu. I couldn't find Windows, so I installed Ubuntu 11.04 on my laptop. Last time I had Ubuntu on it, it was not really compatible with laptop's configuration and I had a bit of problems trying to do normal tasks I used to do on Windows. Now I want to make sure that Windows and its drivers are gone so that I can try to install a newer version of Ubuntu or Windows. I tried the command sudo fdisk -l And the result shown was: myaccount@myaccount-VPCS116FG:~$ sudo fdisk -l [sudo] password for myaccount: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00025b5f Device Boot Start End Blocks Id System /dev/sda1 * 1 38409 308515840 83 Linux /dev/sda2 38409 38914 4052993 5 Extended /dev/sda5 38409 38914 4052992 82 Linux swap / Solaris Disk /dev/dm-0: 4150 MB, 4150263808 bytes 255 heads, 63 sectors/track, 504 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa668cfe8 Disk /dev/dm-0 doesn't contain a valid partition table Is it gone? If not, what command should I try to have access to Windows partitions? Thank you.

  Read the article

• recovering raid 0 hard disk

  - by Hiawatha

  I bumped to a huge (for me) problem. I was running dual boot system (win 7 / linux) and at some point I decided to test fedora ( I am new in Linux ). My hard disk conf: 3 hard disks each 1 TB, 2 set to raid 0 with windows running on it and 1 for linux. After installing it from live usb I found out that windows 7 is not in grub anymore and while booting shows raid error. I installed back Ubuntu and ran Disk Utility and checked now I have one disks (raid 0) failed (READ) error. First has 5 bad sectors and second has 1 bad sector. And now I dont know what to do and how to repair. further I dont know which data i could provide to get help. I tried ntfsfix and got this output: Mounting volume... NTFS signature is missing. FAILED Attempting to correct errors... NTFS signature is missing. FAILED Failed to startup volume: Invalid argument NTFS signature is missing. Trying the alternate boot sector Unrecoverable error Volume is corrupt. You should run chkdsk. #sudo ntfs-3g -o force,rw /dev/sdb /media/windows NTFS signature is missing. Failed to mount '/dev/sdb': Invalid argument The device '/dev/sdb' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?

  Read the article

• Grub not loading after Windows 8 Install

  - by RazorXsr

  My system was configured to dual boot Ubuntu 12.04.1 LTS and Windows 7. Today I got my hands on the MSDN release of Windows 8 and I installed it over my Windows 7. Now the computer just boots to Windows 8 directly without loading the GRUB screen. So I followed the steps as suggested in: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows. Running this command: ls -l /dev/disk/by-label/ gives the following output: total 0 lrwxrwxrwx 1 root root 10 Sep 11 07:51 Entertainment -> ../../sda2 lrwxrwxrwx 1 root root 10 Sep 11 02:45 PENDRIVE -> ../../sdb1 Also fdisk -l command gives this as the output: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1246aa23 Device Boot Start End Blocks Id System /dev/sda1 * 2048 319582199 159790076 7 HPFS/NTFS/exFAT /dev/sda2 319582208 602906623 141662208 7 HPFS/NTFS/exFAT /dev/sda3 602908672 625135615 11113472 83 Linux Disk /dev/sdb: 1939 MB, 1939865600 bytes 64 heads, 63 sectors/track, 939 cylinders, total 3788800 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdb1 * 2248 3788799 1893276 c W95 FAT32 (LBA) So I assume that I have to run this: sudo grub-install /dev/sda3 to get GRUB up and running. But I am getting this error: /usr/sbin/grub-probe: error: cannot find a device for /boot/grub (is /dev mounted?). Can anyone please guide me in the right direction? The current Ubuntu installation is far too customized to my needs to lose it to a boot manager issue! Any help is much appreciated!

  Read the article

• How can I get rid of the motd message "*** /dev/sdb1 will be checked for errors at next reboot ***"? [duplicate]

  - by kmm

  This question already has an answer here: Persistent “disk will be checked…” in the message of the day (motd) even after reboot 3 answers My motd persistently has: *** /dev/sdb1 will be checked for errors at next reboot *** The problem is that I don't have /dev/sdb1 on my system. I only have /dev/sdb2 (mouted as /) and /dev/sda1 which mounts to /media/backup. I delete that line from /etc/motd, but it reappears after reboot. Here's my df output: Filesystem Size Used Avail Use% Mounted on /dev/sdb2 73G 3.7G 66G 6% / udev 490M 4.0K 490M 1% /dev tmpfs 200M 760K 199M 1% /run none 5.0M 0 5.0M 0% /run/lock none 498M 0 498M 0% /run/shm /dev/sda1 1.9T 429G 1.4T 25% /media/backup Update Here is the output of sudo fdisk -l Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003dfc2 Device Boot Start End Blocks Id System /dev/sda1 63 3907024064 1953512001 83 Linux Disk /dev/sdb: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00049068 Device Boot Start End Blocks Id System /dev/sdb1 152301568 156301311 1999872 82 Linux swap / Solaris /dev/sdb2 * 2048 152301567 76149760 83 Linux Partition table entries are not in disk order I guess /dev/sdb1 is my swap space.

  Read the article

• How do I get 12.04 to recognize swap partition so that I can hibernate?

  - by Kayla

  I justed installed 12.04 and used gparted to erase and enlarge my swap partition. When I rebooted, gparted said that the file partition for the swap was unknown. Gparted doesn't let me change the file partition to "linux-swap". It does let me change it to NTFS, but when I reboot, it goes back to "unknown". Thanks in advance for your help. Output from sudo swapon -s: Filename Type Size Used Priority /dev/mapper/cryptswap1 partition 9025532 0 -1 Output from sudo fdisk -l: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9d63ac84 Device Boot Start End Blocks Id System /dev/sda1 * 2048 2459647 1228800 7 HPFS/NTFS/exFAT /dev/sda2 2459648 197836472 97688412+ 7 HPFS/NTFS/exFAT /dev/sda3 466890752 488395119 10752184 7 HPFS/NTFS/exFAT /dev/sda4 197836798 466890751 134526977 5 Extended /dev/sda5 197836800 448837631 125500416 83 Linux /dev/sda6 448839680 466890751 9025536 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/mapper/cryptswap1: 9242 MB, 9242148864 bytes 255 heads, 63 sectors/track, 1123 cylinders, total 18051072 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x951b7f53 Disk /dev/mapper/cryptswap1 doesn't contain a valid partition table

  Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >