Search Results

Search found 8831 results on 354 pages for 'intel graphics'.

Page 13/354 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

• Issues with Dz77BH-55K Motherboard and i7 processor on 12.04

  - by Naveed

  I just built a computer with Intel's DZ77BH-55K motherboard with i7-3770 processor. On 12.04, 11.10, and 11.04 and Linux Mint 12, the computer has been really laggy. The graphics aren't working (choppy effects, bad resolution) and the keyboard and mouse inputs are even laggy and unreliable (skips keystrokes). I'm not sure what the problem is or what I can do to fix it. I tried sudo apt-get install mesa-utils but nothing changed. I've also messed around in the BIOS but no luck there either. Any ideas? Could it possibly be a hardware issue?

  Read the article

• gnome shell with very high CPU usage

  - by 501 - not implemented

  i'm running ubuntu gnome 13.10 on my dell latiude e6510 with a i5 m560. The I5 comes with a embedded Intel HD 3400 Graphics. The average cpu usage of the gnome-shell is by 160% it's to high, I think. Is there a problem with a driver? If i call the command glxinfo | grep OpenGL it returns: OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.3, 128 bits) OpenGL version string: 2.1 Mesa 9.2.1 OpenGL shading language version string: 1.30 OpenGL extensions: Greetings

  Read the article

• How come ASUS sells Ubuntu installed 1225Cs, when we dont have drivers for gma3600?

  - by sumit_gt

  I recently purchased a ASUS 1225C cedar trail netbook. It didn't come preinstalled with Ubuntu like it comes in some markets. I installed Ubuntu 12.04 LTS on it. While Ubuntu works just fine, I am bothered by the lack of proper graphics support because of intel gma 3600. I am aware that this is not a problem of Ubuntu. My question is this: How does ASUS manage to sell these netbooks in other markets with Ubuntu preinstalled? How does ASUS manage to get everything to work? And if they can, why aren't I able to do the same? link: For more on Asus 1225C As you can see, they show Ubuntu working perfectly in the screenshots. Is this false advertising?

  Read the article

• How to set up multiple GPUs (12.04)?

  - by Brother Erryn

  I have two GPUs: one Intel i915 integrated, and one NVIDIA 560 Ti. This is NOT a hybrid setup, nor a laptop. In Windows 7, each card is connected to a different monitor, with the NVIDIA doing any "heavy lifting". For the life of me I cannot get Ubuntu to recognize the i915, but when logging off or rebooting, the shutdown actually appears on the i915. lshw lists both. I'm running the "current" NVIDIA drivers (not the experimental), but Displays calls its monitor a "Laptop". Is this even possible under Ubuntu? The only things that even looked like potential solutions were for laptop hybrid setups and used Bumblebee, but that doesn't seem to apply here.

  Read the article

• Gnome 3 freezes on logon on samsung RV 509

  - by Noufal

  I have a Samsung NP-RV509 A0FIN and I tried to install GNU/Linux with gnome 3.2 on it. I tried Fedora 16, Ubuntu 11.10 and Linux Mint 12 RC, but with no success. All of these freezes upon login into gnome shell. I think it is the problem with graphics driver, so I tried xorg-edgers ppa on my last installation, ie., Linux Mint. I also tried various intel graphics packages listed on Synaptic package manager, but no success again. My device configuration is as follows(obtained from windows 7): More details about my computer Component Details Subscore Base score Processor Intel(R) Pentium(R) CPU P6200 @ 2.13GHz 5.6 4.6 Memory (RAM) 4.00 GB 7.2 Graphics Intel(R) HD Graphics 4.6 Gaming graphics 1562 MB Total available graphics memory 5.2 Primary hard disk 12GB Free (50GB Total) 5.9 Windows 7 Ultimate System -------------------------------------------------------------------------------- Manufacturer SAMSUNG ELECTRONICS CO., LTD. Model RV409/RV509/RV709 Total amount of system memory 4.00 GB RAM System type 32-bit operating system Number of processor cores 2 64-bit capable Yes Storage -------------------------------------------------------------------------------- Total size of hard disk(s) 418 GB Disk partition (C:) 12 GB Free (50 GB Total) Media drive (D:) CD/DVD Disk partition (E:) 526 MB Free (191 GB Total) Disk partition (F:) 101 GB Free (177 GB Total) Graphics -------------------------------------------------------------------------------- Display adapter type Intel(R) HD Graphics Total available graphics memory 1562 MB Dedicated graphics memory 64 MB Dedicated system memory 0 MB Shared system memory 1498 MB Display adapter driver version 8.15.10.2202 Primary monitor resolution 1366x768 DirectX version DirectX 10 Network -------------------------------------------------------------------------------- Network Adapter Realtek PCIe GBE Family Controller Network Adapter Broadcom 802.11n Network Adapter Network Adapter Microsoft Virtual WiFi Miniport Adapter Notes -------------------------------------------------------------------------------- The gaming graphics score is based on the primary graphics adapter. If this system has linked or multiple graphics adapters, some software applications may see additional performance benefits. Any help is appreciated, and thanks in advance.

  Read the article

• Problem implementing Blinn–Phong shading model

  - by Joe Hopfgartner

  I did this very simple, perfectly working, implementation of Phong Relflection Model (There is no ambience implemented yet, but that doesn't bother me for now). The functions should be self explaining. /** * Implements the classic Phong illumination Model using a reflected light * vector. */ public class PhongIllumination implements IlluminationModel { @RGBParam(r = 0, g = 0, b = 0) public Vec3 ambient; @RGBParam(r = 1, g = 1, b = 1) public Vec3 diffuse; @RGBParam(r = 1, g = 1, b = 1) public Vec3 specular; @FloatParam(value = 20, min = 1, max = 200.0f) public float shininess; /* * Calculate the intensity of light reflected to the viewer . * * @param P = The surface position expressed in world coordinates. * * @param V = Normalized viewing vector from surface to eye in world * coordinates. * * @param N = Normalized normal vector at surface point in world * coordinates. * * @param surfaceColor = surfaceColor Color of the surface at the current * position. * * @param lights = The active light sources in the scene. * * @return Reflected light intensity I. */ public Vec3 shade(Vec3 P, Vec3 V, Vec3 N, Vec3 surfaceColor, Light lights[]) { Vec3 surfaceColordiffused = Vec3.mul(surfaceColor, diffuse); Vec3 totalintensity = new Vec3(0, 0, 0); for (int i = 0; i < lights.length; i++) { Vec3 L = lights[i].calcDirection(P); N = N.normalize(); V = V.normalize(); Vec3 R = Vec3.reflect(L, N); // reflection vector float diffuseLight = Vec3.dot(N, L); float specularLight = Vec3.dot(V, R); if (diffuseLight > 0) { totalintensity = Vec3.add(Vec3.mul(Vec3.mul( surfaceColordiffused, lights[i].calcIntensity(P)), diffuseLight), totalintensity); if (specularLight > 0) { Vec3 Il = lights[i].calcIntensity(P); Vec3 Ilincident = Vec3.mul(Il, Math.max(0.0f, Vec3 .dot(N, L))); Vec3 intensity = Vec3.mul(Vec3.mul(specular, Ilincident), (float) Math.pow(specularLight, shininess)); totalintensity = Vec3.add(totalintensity, intensity); } } } return totalintensity; } } Now i need to adapt it to become a Blinn-Phong illumination model I used the formulas from hearn and baker, followed pseudocodes and tried to implement it multiple times according to wikipedia articles in several languages but it never worked. I just get no specular reflections or they are so weak and/or are at the wrong place and/or have the wrong color. From the numerous wrong implementations I post some little code that already seems to be wrong. So I calculate my Half Way vector and my new specular light like so: Vec3 H = Vec3.mul(Vec3.add(L.normalize(), V), Vec3.add(L.normalize(), V).length()); float specularLight = Vec3.dot(H, N); With theese little changes it should already work (maby not with correct intensity but basically it should be correct). But the result is wrong. Here are two images. Left how it should render correctly and right how it renders. If i lower the shininess factor you can see a little specular light at the top right: Altough I understand the concept of Phong illumination and also the simplified more performant adaptaion of blinn phong I am trying around for days and just cant get it to work. Any help is appriciated. Edit: I was made aware of an error by this answer, that i am mutiplying by |L+V| instead of dividing by it when calculating H. I changed to deviding doing so: Vec3 H = Vec3.mul(Vec3.add(L.normalize(), V), 1/Vec3.add(L.normalize(), V).length()); Unfortunately this doesnt change much. The results look like this: and if I rise the specular constant and lower the shininess You can see the effects more clearly in a smilar wrong way: However this division just the normalisation. I think I am missing one step. Because the formulas like this just dont make sense to me. If you look at this picture: http://en.wikipedia.org/wiki/File:Blinn-Phong_vectors.svg The projection of H to N is far less than V to R. And if you imagine changing the vector V in the picture the angle is the same when the viewing vector is "on the left side". and becomes more and more different when going to the right. I pesonally would multiply the whole projection by two to become something similiar (and the hole point is to avoid the calculation of R). Altough I didnt read anythinga bout that anywehre i am gonna try this out... Result: The intension of the specular light is far too much (white areas) and the position is still wrong. I think I am messing something else up because teh reflection are just at the wrong place. But what? Edit: Now I read on wikipedia in the notes that the angle of N/H is in fact approximalty half or V/R. To compensate that i should multiply my shineness exponent by 4 rather than my projection. If i do that I end up with this: Far to intense but still one thing. The projection is at the wrong place. Where could i mess up my vectors?

  Read the article

• Drawing path by Bezier curves

  - by OgreSwamp

  Hello. I have a task - draw smooth curve input: set of points (they added in realtime) current solution: I use each 4 points to draw qubic Bezier curve (1 - strart, 2 and 3rd - control points, 4- end). End point of each curve is start point for the next one. problem: at the curves connection I often have "fracture" (angle) Can you tell me, how to connect my points more smooth? Thanks!

  Read the article

• can i get the font information from Graphics System.Drawing.Graphics in c#

  - by Bahgat Mashaly

  Hello i get the Graphics from Graphics g= System.Drawing.Graphics.FromHwnd(button1.Handle); can i get the font information from this Graphics i was try to get a font by using GetTextFace api function but it return "system" it mean default font in OS and i was try to use SendMessage(button1.Handle, WM_GETFONT, 0, 0); bu it return me 0 also it is mean default font in OS I have known the cause of the problem, it due to FlatStyle property See this link http://blogs.msdn.com/b/michkap/archive/2008/09/26/8965526.aspx thanks

  Read the article

• How do i change color vibrance/saturation with intel graphics on my laptop?

  - by neelts

  like in the nvidia control panel laptop model is lenovo u350

  Read the article

• 2 folders in Sys/Class/Backlight?

  - by zebrapie

  ISSUE: Backlight brightness does not change. More Detail: Brightness will not change, using both 'System Settings-Screen', or FN keys (Brightness bar shows and moves, but screen brightness does not change). Notcied a post in this thread (http://ubuntuforums.org/showthread.php?t=1866283) about having multiple folders in Sys-Class-Backlight... I HAVE TWO FOLDERS TOO! 'intel_backlight' and 'acpi_video0' Using the function keys, alters the value in the acpi_video0's 'Brightness' file - But doesn't actually alter the brightness of the screen. If I add 'backlight=vendor' in Grub, my function keys then edit the value in the 'Intel_Backlight brightness file. - But again doesnt actually change the brightness of the screen. Computer: Fujitsu Siemans Pi2515, Intel Integrated Graphics, No hdd partition. Already Tried: -Editing grub to contain: acpi_osi=Linux acpi_backlight=vendor -http://ubuntuguide.net/change-screen-brightness-with-fn-key-in-ubuntu-11-0410-10 -sudo apt-get install acpi -$ sudo setpci -s 00:02.0 F4.B=20 -Brightness does not adjust in fallback mode either. -Reinstalling OS, Using Linux Mint (Same problem). -Upgrading and downgrading BIOS. Many thanks for reading, I understand this problem may need a bit of a Linux pro to sort. If anyones up for the challenge i'll spend any amount of time being walked through this, posting results. Don't want to give up here!

  Read the article

• Is 2 lines of push/pop code for each pre-draw-state too many?

  - by Griffin

  I'm trying to simplify vector graphics management in XNA; currently by incorporating state preservation. 2X lines of push/pop code for X states feels like too many, and it just feels wrong to have 2 lines of code that look identical except for one being push() and the other being pop(). The goal is to eradicate this repetitiveness,and I hoped to do so by creating an interface in which a client can give class/struct refs in which he wants restored after the rendering calls. Also note that many beginner-programmers will be using this, so forcing lambda expressions or other advanced C# features to be used in client code is not a good idea. I attempted to accomplish my goal by using Daniel Earwicker's Ptr class: public class Ptr<T> { Func<T> getter; Action<T> setter; public Ptr(Func<T> g, Action<T> s) { getter = g; setter = s; } public T Deref { get { return getter(); } set { setter(value); } } } an extension method: //doesn't work for structs since this is just syntatic sugar public static Ptr<T> GetPtr <T> (this T obj) { return new Ptr<T>( ()=> obj, v=> obj=v ); } and a Push Function: //returns a Pop Action for later calling public static Action Push <T> (ref T structure) where T: struct { T pushedValue = structure; //copies the struct data Ptr<T> p = structure.GetPtr(); return new Action( ()=> {p.Deref = pushedValue;} ); } However this doesn't work as stated in the code. How might I accomplish my goal? Example of code to be refactored: protected override void RenderLocally (GraphicsDevice device) { if (!(bool)isCompiled) {Compile();} //TODO: make sure state settings don't implicitly delete any buffers/resources RasterizerState oldRasterState = device.RasterizerState; DepthFormat oldFormat = device.PresentationParameters.DepthStencilFormat; DepthStencilState oldBufferState = device.DepthStencilState; { //Rendering code } device.RasterizerState = oldRasterState; device.DepthStencilState = oldBufferState; device.PresentationParameters.DepthStencilFormat = oldFormat; }

  Read the article

• Intel NIC X540-T1 non-functional in Ubuntu Server 12.04

  - by Jeff Carr

  I have installed three Intel X540-T1's in servers running Ubuntu Server 12.04, but all are non-functional, no link lights, no packets sent or received, and no connection on ip4 or ip6 whether set up as dhcp or static. Also, dmesg doesn't detect cable connection or disconnection. I updated the default ixgbe driver to Intel's latest version (3.11.33) with no change. The ethernet controller is being reported as X540-AT2 (which might be a problem that I can't figure out how to fix), but the subsystem is X540-T1 so I believe that might be intended. Does anyone have any experience with this that could assist? ifconfig eth2 eth2 Link encap:Ethernet HWaddr a0:36:9f:14:5f:ea inet addr:192.168.101.1 Bcast:192.168.101.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1<br> RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ethtool -i eth2 driver: ixgbe version: 3.11.33 firmware-version: 0x8000037c bus-info: 0000:08:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes lspci -vvnns 08:00.0 08:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller 10 Gigabit X540-AT2 [8086:1528] (rev 01) Subsystem: Intel Corporation Ethernet Converged Network Adapter X540-T1 [8086:0002] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at e8000000 (64-bit, prefetchable) [size=2M] Region 4: Memory at e8200000 (64-bit, prefetchable) [size=16K] [virtual] Expansion ROM at e8280000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: ixgbe Kernel modules: ixgbe

  Read the article

• Intel ICH9/10R raid 5 drive failure

  - by davpen

  About a year ago I was using the native Intel ICH9R Raid 5 an Intel P35 based motherboard. The system was running Vista x64 and when one of the drives failed Vista blue screened on boot until I had figured out which drive had failed and removed it (a rather nerve racking hit and miss affair). The same thing happened some months later on another similar system so it wasn't a once off. This wasn't the robust raid 5 drive failure behavior that I would have hoped for and expected. I moved to Highpoint Rocketraid 2300 and haven't had any problems although I have yet to have a drive fail with this set up. But I am now looking to build a new system based on an i7 and Windows 7. At the moment Highpoint doesn't have drivers for Windows 7 so I am considering moving back to the on board Intel Raid. Yes I know I that I might get away with using the Vista drivers but I don't really want to take that chance with critical data. The question then is has anyone else experienced a drive failure with Intel raid and how did the OS and drivers handle it? Is it safe to go back?

  Read the article

• Problems reviving old pc including graphics card issue.

  - by Mick

  I have a PC that seemed to have died years ago that I am trying to revive. It has a dual core athlon processor and a gigabyte motherboard. It had two dual output graphics cards, and I have long since forgotten which output would print out the diagnostic information as the PC starts up. Also I suspect that the resolution set on all the monitors was probably higher than my current single monitor is capable of displaying. The motherboard also has a built in graphics card, so I thought it may be simplest to remove both the graphics cards and plug my monitor into the onboard graphics just while I get things going. Does that seem sensible? Now the other problem: The PC has two hard drives. I have no idea which one is the primary one it is attempting to boot from. When I power up, the fan comes on and I hear some chuga-chuga-pause chuga-chuga-pause repeat indefinitely. I'm not sure which device is making the noise. There are no-beeps at any time. I see nothing on the screen at any time, not even for a second. Any suggestions? EDIT: If T start up the PC without the power connected to the CDrom there is no chuga-chugan noise.

  Read the article

• Graphics Driver problem, ATI Radeon HD 3200, small screen size and slows everything down.

  - by Arvind Jangid

  Regards. I am using a: 2009 Compaq Presario CQ40-415AU Notebook AMD Athlon X2 Dual core Processor 2.1 GHz 1024 MB L2 cache 3GB DDR2 RAM ATI Radeon + HD 3200 Graphics 256 MB, screen is 14 inch widescreen with resolution of 1280*800. I installed Ubuntu 12.04 LTS 32bit on my laptop. It works brilliantly until I installed graphics driver. When I installed the driver, the graphics became slow. Everything slowed down. Even the splash screen resolution changed to something like 640*480. I have liked Ubuntu since 9.10 and for the freedom it provides and its versatility, but graphics problem remains the same. I even installed Ubuntu on a 50 GB partition with 6 GB swap partition. My HDD is 320 GB. Please tell me what is wrong.

  Read the article

• Multiple Graphics Cards on Fedora 15 (Gnome 3)

  - by Michael

  I have the (delightful) misfortune of having 3 graphics cards. They are XFX Radeon 5750s. Each drives 2 monitors via dvi. I am having a really hard time getting these running on fedora 15 (gnome 3). So my setup is 3 columns of 2 monitors (the upper monitor is mounted upside down in each column to reduce the bezel between monitors). When the (graphical) login screen comes up all 6 have the blue stripey background that must be the default, but then when I login, things get interesting. In the xorg.conf below, you will see only 2 of the screens in the serverlayout while the other 4 are commented out. Logging in with only 2 of the screens active works well (and it even remembers that the top one is upside down, and should be considered above the lower, i am not sure where it stores this info, but i set it using the graphical "Displays" settings) However, as soon as I uncomment a third screen, or more, it gives me an error message when I login. It's one of those friendly, less helpful messages (Oh no! Something has gone wrong. A problem has occurred and the system can't recover. Please log out and try again). If i do not use an xorg.conf, then the "Displays" prefs pane shows only the two monitors on one of my graphics cards Thanks to anyone who can help me get going! (xorg.conf and then lspci below, and xorg log) xorg.conf Section "ServerLayout" Identifier "X.org Configured" Screen "Screen0" 0 0 Screen "Screen1" Below "Screen0" # Screen "Screen2" RightOf "Screen0" # Screen "Screen3" RightOf "Screen1" # Screen "Screen4" RightOf "Screen3" # Screen "Screen5" RightOf "Screen4" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "catalogue:/etc/X11/fontpath.d" FontPath "built-ins" EndSection Section "Module" Load "record" Load "dri" Load "dbe" Load "extmod" Load "dri2" Load "glx" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor3" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor4" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor5" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" Identifier "Card0" Driver "radeon" BusID "PCI:4:0:0" EndSection Section "Device" Identifier "Card1" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Card2" Driver "radeon" BusID "PCI:6:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Card0" Monitor "Monitor1" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Card1" Monitor "Monitor2" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Card1" Monitor "Monitor3" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen4" Device "Card2" Monitor "Monitor4" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen5" Device "Card2" Monitor "Monitor5" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection lspci output follows [tgm@tgm ~]$ lspci 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 02:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:02.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 04:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 04:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 05:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 05:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 06:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 06:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) xorg log (posted to fpaste due to how long it is. thanks to marcusw for the request) http://www.fpaste.org/r5ww/ xorg log with all 6 monitors enabled in xorg.conf (they all turn on and have blue, but then one gets the aforementioned user-friendly error message). http://www.fpaste.org/X63H/

  Read the article

• Are VM-based languages becoming viable for Graphics since the move to GPU computing?

  - by skiwi

  Perhaps the title is not the most clear, so let me elaborate it more: I am talking about VM-based languages, by that I mean languages that run on the JVM (java) and for example C#. Also I am talking about 3D graphics, just to be clear. Lately the trend has been that most computing is being done on the GPU and not on the CPU, and since times the issue with programming games on a VM-based language is that garbage collecting may happen randomly. So let's take a look which is responsible for what: Showing the graphics: GPU Uploading graphics to the GPU: CPU? Needs to be done every frame? Calculating physics constraints: GPU Doing the real game logic (Determining when to move objects (independent of physics calculations), processing AI): CPU Is my list actually correct? And if it is, is for example Java becoming more viable? Or is uploading the graphics (vertices) still the most expensive operation? Would like to get more insight into this.

  Read the article

• Does running Nexuiz gives extra pressure on Processor if you dont have external Graphics card?

  - by Curious Apprentice

  Its a rather stupid question, though I want to be sure. Does having a external graphics card can lower the stress over the processor? what kind of graphics card Ubuntu supports ? Well I'm planning to buy a graphics card for Windows 7 as I have started learning Adobe Premiere Pro. Which G card should I buy? Do i consider the card or the availability of the card drivers for Ubuntu Linux ? If I install a Graphics card and does not install its drivers can I left it unused on Ubuntu ? I don't think theres a much need for G card on Ubuntu Though.

  Read the article

• Is Ubuntu recognizing and/or using my NVIDIA graphics card?

  - by user212860

  This is my first post here, and I'm pretty new to Ubuntu/Linux. I currently have no other OS except for Ubuntu 13.10. (I used to have Win7 until i got a new terabyte hard drive). My current PC build, if any of this helps: CPU: Intel i5 quad-core Graphics: NVIDIA GeForce GTX 650 RAM: 8 GB HDD: 1 TB SATA 3 Motherboard: MSi Z77 A-G41 OS Ubuntu 13.10 So I recently installed Ubuntu 13.10 and put Steam on it, and I'm seeing that my games run a lot slower than they did when I had Win7. I figured it was a graphics problem, so I checked System Settings Details Overview. It says in "Graphics" that I have "Gallium 0.4 on NVE7" (don't really know what that is). Does this mean that Ubuntu is not using my graphics card? In System Settings Software & Updates Additional Drivers, it clearly shows like this: NVIDIA Corporation: GK107 [GeForce GTX 650] -This device is using an alternative driver (And then it shows a list of drivers that I can switch back and forth to) So this is a bit confusing. In Software and Updates, it clearly shows that I have my NVIDIA card installed, and that I have a driver selected for it. But in System Settings, it shows I have some Gallium 0.4 thing. I had done a bit of research, and ended up typing command: "lspci|grep VGA" in the Terminal. It showed this in response: VGA compatible controller: NVIDIA Corporation GK107 [GeForce GTX 650] (rev a1) The Terminal seems to recognize my graphics card. What it looks like to me, is that I don't have the proper driver, and I might be using my CPU's integrated graphics. When I switch around which driver I am using in that list, it still does not see my card in System Settings. Some of the drivers in the list give me some sort of OpenGL error when I try to run a game. It might just be that my games are running slow because the game developers have not optimized it for Ubuntu that well. However, that still doesn't take away from the fact that System Settings is not showing my NVIDIA card. TL;DR Version: How do I know if my video card is being recognized/used? If my video card is not being used, what is the best way fix that? Please make your answers easy to understand. I do not mind wordy responses, as long as I can follow what you're saying. Any help would be greatly appreciated! Thanks, Jabber5

  Read the article

• Intel P6100 CPU and Mobile Intel® HM55 Express Chipset

  - by Christopher Painter

  I have an Asus K52F-BBR5 notebook that uses an Intel P6100 ( 2GHZ 15x multiplier) and HM55 Express Chipset. I'm looking to replace it's 3GB with 8GB. The Crucial database seems to indicate that a PC3-8500 CAS 7 and PC3-10666 CAS 9 will both work. I'm not up to date on the latest DDR3 nomencalature and I'm wondering which would provide better performance. The price difference is negligible. Drawing on past experiences from many many years ago I could make an argument for either based on sync/async bus speed arguments and CAS latency differences but the truth is I don't know enough about the HM55 chipset to know which would be the correct choice. Does anyone know the answer or point me to information that would help me make the choice? I'm pretty sure the performance difference will be somewhat negligible also but still I'd like to make the optimal choice.

  Read the article

• Fried graphics card, how to proceed ?

  - by user19496

  Motherboard: Biostar TPower I45 I fried my graphics card (white smoke), by removing the cable marked PCI-E from the card, and then booting. Removed the graphics card, and now the machine is booting, and I can ping it. However I have no possibility to see what is actually happening, because I can't attach a monitor. Can I workaround the lack of monitor in some way, just to see if the motherboard is fine, attach a cable and telnet in or any other way ? Or, do I have to buy and install a new graphics card to be sure ?

  Read the article

• Linux Programs for pulling measurements from graphics

  - by Zack

  As a front-end developer, I'm often given graphics of web sites and told pretty much, "Make it work." I've recently started working on Linux 100% of the time and was wondering if there's any programs out there that're good for "digesting" graphics. All I do, pretty much, is draw little selection boxes and takes notes on their dimensions; I also slice out a piece of the graphic (i.e. copy out just the part of the graphic I need for to make the same effect in CSS). Before now I've been very happy with Fireworks, but I need something for Linux, any suggestions? As a note, I mainly deal with pixel based graphics, so the program being vector based isn't a necessity.

  Read the article

• MAC OS for Intel based PCs

  - by Maven

  I have an Intel dual core PC with 4GB of RAM and Graphics card. For on of my student Assignment I need to install Latest possible MAC OS on my system as a secondary OS. Like on boot it asks me that which OS i want to boot with Win 8.1 or Mac Os.. I searched on the internet and found two conflicting opinion some people said there are few MAC OS Version which can be directly installed on Intel PCs some says there aren't? I am here to get rid of the confusion that is an official latest possible MAC OS version for Intel based PCs? If not what are my options if I want to run MAC OS on my PC. Please not that Virtualization options won’t work for me, it has to be working as full OS not an os inside another.

  Read the article

• Upgrade the Graphics Card for a Dell Dimension 3100

  - by Pat Foran

  Hi, I have a Dell Dimension 3100 Desktop with a 128MB Graphics Card Integrated into the Mother Board. I need to upgrade this 128MB to at least 256MB or 512MB if the system will support same. I am told by Dell that all I have is a PCIx1 slot and that they do not stock a Graphics Card for this. I was told to shop around at Amazon and ebay etc and I would find one there. I have shopped around for some time now and do not know exactly what I am looking for. There are several PCI Graphics Card out there but which one would be the correct one for a Dell Dimension 3100. Can you help me resolve this problem. If you know of a PCIx1 card that will sort out my problem you might please let me have all the details for to purchase it. Regards, Pat,

  Read the article

• Windows Experience Index Dropped After Adding Dedicated Graphics Card

  - by Ludo

  I purchased a new PC with a Gigabye Z68X-UD3H-B3. I had a Radeon HD 5450 graphics card spare, so I've added that instead of using the onboard graphics as I just presumed it would be better. But, my windows experience index has gone down. From 5.4 to 5. Dekstop Performance has dropped from 5.4 to 5, although gaming graphics has gone up from 5.9 to 6.2. I'm not actually going to be using the machine for gaming, just audio production, but I added the card as I'll possibly be doing video editing in future too. Why would this be? Can I trust windows experience index scores? Or is it possible the onboard stuff is just better for general desktop stuff? Thanks! Ludo.

  Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >