Search Results

Search found 721 results on 29 pages for 'justin daniels'.

Page 13/29 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

• Best Free Windows Imaging Software For Servers

  - by Justin

  We are running two physical servers both Windows 2003, not virtualized. What is the best free (if any) windows software to take a full image backup of the entire drives? If possible, while the image is taking place, it should not bring the hosts to their knees with excess CPU or I/O usage. The servers have RAID mirroring, but after hearing a few horror stories about hacked systems, we need to have weekly full image backups, so we can simply revert to a pre-hacked image. Thanks.

  Read the article

• Will Software RAID And iSCSI Work For A SAN

  - by Justin

  I am looking for a SAN solution, but can't afford even entry level solutions. Basically, the SAN is for development and a proof of concept product. The performance doesn't have to be amazing, but needs to be functional. My buddy says we should just setup sotware RAID and software iSCSI in Linux. Essentially I have a spare server with dual Xeon processors, 4GB of memory, and (2) 500GB 7200RPM drives. It's a bit old but working. I am sure there is reason people don't do software RAID and iSCSI, but will performance be usable? Thinking of configuring the drives in RAID 0 (for performance).

  Read the article

• Change sysout logging level for Weblogic

  - by Justin Voss

  When I run a local copy of Weblogic, I like to see the output in the console so that I can observe my app's logging messages. But, Weblogic spits out a lot of log messages I don't care about, like these: [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' 08-29-2010 01:02:21 INFO Getting a JNDI connection [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' 08-29-2010 01:02:21 INFO Connection Returned. Elapsed time to acquire=0ms. [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' 08-29-2010 01:02:21 INFO Getting a JNDI connection [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' 08-29-2010 01:02:21 INFO Connection Returned. Elapsed time to acquire=0ms. Can I configure Weblogic to not output those? I assume that I can change the logging level to something higher than INFO and that should fix it?

  Read the article

• Capturing a firewire video feed in Leopard on a G4

  - by Justin Dearing

  Hi, I have a powerbook G4 that I loaded up with Leopard (OSX 10.5). I don't have iMovie, since the Leopard version requires an intel mac. I have a Sony Digital 8 Camcorder with firewire and usb output. The usb output requires a special driver on windows. I don't think OSX will support it. I wish to capture the video stream from the camera on my G4. VLC does not support firewire capture on OSX, I don't want to pay for QT professional. I'm looking for a solution. I'd prefer open source, but I'd consider freeware and inexpensive for pay options. On a related note, if it can capture still frames, I have a related question.

  Read the article

• Can't access one directory via HTTPS + public FQDN

  - by Justin James

  Hello - I have the strangest IIS error that I've ever seen in my life. I have an application/directory on an IIS server, that throws an error 500 when accessing ANY of the content in it, including HTML documents, when accessed via HTTPS AND the machines FQDN. When I access it with "localhost" it works fine. When I added a bogus entry for the NIC's IP in the hosts file, it worked fine. When I access it with the machines name and HTTP it works fine. Here's a chart (the machine's name is "lofn.titaniumcrowbar.com"): http - lofn.titaniumcrowbar.com: works https - lofn.titaniumcrowbar.com: broken https - localhost: works https - temp.titaniumcrowbar.com (put into hosts file): works I set up tracing, and I got some useless information: "The I/O operation has been aborted because of either a thread exit or an application request. (0x800703e3)" This would make sense, except this happens when pulling up static content. While the directory may be an "application", the content is all static in it. Any/all suggestions, no matter how strange, are VERY appreciated. Thanks! J.Ja

  Read the article

• How does Windows 7 licensing work for running the OS as Virtual Machines?

  - by Justin Dearing

  I plan on buying Windows 7 Ultimate Edition to run on an old Pentium 4. I also want to run Win7 virtual machines inside Win7. My question is two fold: Do I need a license for each Virtual Machine Does the answer change if I use a third party virtualization platform (e.g. VirtualBox, VMWare, QEMU, etc) as opposed to VirtualPC

  Read the article

• Lost "VGA Display" color profile in OS X

  - by Justin Love

  OS X Display settings used to have a color profile named VGA Display, which I found quite usefully for finding color problems before hooking up a projector. Currently, this profile (along with a number of others I've collected from projectors in the past year) is not available. I'm currently OS X 10.6.6 and my best guess is the profiles got wiped out during the last upgrade. None of the available color profiles seem to stink quite enough. Am I overlooking a renamed profile? Is there somewhere I could get a 'VGA Display' profile to install on my computer?

  Read the article

• What do YOU use for your Windows Server backup solution?

  - by Justin Higgins

  I know there are many choices, from builtin ntbackup, to FOSS, to commercial to custom script, but I was wondering what YOUR choice is for your servers and environment and a brief explanation of why. As each environment and requirements differ, there is no one right solution, except that you should be backing up and verifying restoration regularly. As a bonus, do you use D2D2D? D2D2T? D2D2Cloud?

  Read the article

• Sonicwall Enhanced With One-To-One NAT, Firewall Blocking Everything

  - by Justin

  Hello, just migrated from a Sonicwall TZ180 (Standard) to a Sonicwall TZ200 (Enhanced). Everything is working except the firewall rules are blocking everything. All hosts are online, and being assigned correct ip addresses. I can browse the internet on the hosts. I am using one-to-one NAT translating public ip addresses to private. 64.87.28.98 -> 192.168.1.2 64.87.28.99 -> 192.168.1.3 etc First order of business is to get ping working. My rule is in the new firewall is (FROM WAN to LAN): SOURCE DESTINATION SERVICE ACTION USERS ANY 192.168.1.2-192.168.1.6 PING ALLOW ALL This should be working, but not. I even tried changing the destination to the public ip addresses, but still no luck. SOURCE DESTINATION SERVICE ACTION USERS ANY 64.87.28.98-64.87.28.106 PING ALLOW ALL Any ideas what I am doing wrong?

  Read the article

• Is an NTBackup of a MySQL data directory reliable

  - by Justin Dearing

  This question was asked on the MySQL forums in 2004 with no answers. I'm installing MySQL 5.0.x on a Windows 2003 Server for use with Drupal. I began to configure the backup with mysqldump when it occurred to me that an ntbackup taken using shadow copying should be reliable enough for backing up the database. Is there any flaw in my logic?

  Read the article

• Whenever I hold alt/option and move my mouse, Mac OS X resizes my window... how do I stop that?

  - by Justin Searls

  I've been using Mac OS X for maybe 6 years now, and I have no idea what's causing this. Maybe someone else has this experience and can help me out. Symptom: while holding the alt/option key, if I move my mouse the current window starts resizing, anchored at the top left (it behaves exactly as if I had clicked-and-dragged the lower-right icon on the window). Anyone have an idea of what I may have installed that caused this? Or how to make it stop?

  Read the article

• How to upgrade a single instance's size without downtime

  - by Justin Meltzer

  I'm afraid there may not be a way to do this since we're not load balancing, but I'd like to know if there is any way to upgrade an EC2 EBS backed instance to a larger size without downtime. First of all, we have everything on one instance: both our app and our database (mongodb). This is along the lines i'm thinking: I know you can create snapshots of your EBS and an AMI of your instance. We already have an AMI and we create hourly snapshots. If I spin up a new separate instance of a larger size and then implement (not sure what the right term is here) the snapshots so that our database is up to date, then I could switch the A record of our domain from the old ip address to the new one. However, I'm afraid that after copying over the data from the snapshot, by the time it takes to change the A record and have that change propagate, the data could potentially be stale. Is there a way to prevent this, and is there a better way to do this than I am suggesting?

  Read the article

• Safe to Use an Amazon EBS Volume While Snapshot in Progress?

  - by Justin Noel

  Is it safe to use an EBS volumne while a snapshot is being created? I've currently got a 100Gb EBS volume mounted. I am in the process of snapshotting it. Goodness it's slow!! It's going to end up taking more than 45 minutes to snapshot. My question : Is the EBS volume already copied and just being saved somewhere? Or, is the snapshot actively copying from my mounted volume right now? Basically, if I start using it before the snapshot completes, am I hosed? I just can't believe it takes this long to copy. There really isn't even 100GB in use. It's more like 25Gb.

  Read the article

• OS2/Warp - Remotely Stop and Restart a Program

  - by Justin S

  Our current phone system runs off of a legacy OS2/Warp box. Periodically we have to log into the machine and restart OS2RSD.exe and then start it again and the phone system starts working again. The problem is we have to physically get in front of the box and use the GUI to stop and restart the process. Is it possibly to remotely run a script to kill OS2RSD.exe if its running and then start it again? I have been unable to figure this out on my own. The OS is OS2/Warp Version 3 if that helps.

  Read the article

• Allow application to access drive while blocking direct access from users in Server 2008r2?

  - by Justin Hawk

  In Windows Server 2008 R2, can I grant permission for a specific application to access a drive, while at the same time blocking users from viewing/browsing/reading that drive? Edit: Additional Info: Users are logged in to a terminal server. The application is a 3rd party rich GUI .exe, launched by the user. It stores large images files on the hard disk. I would like the user to only be able to access these files through the application, not by browsing the disk. The application does not have a service component.

  Read the article

• Unable to connect to Windows VPN from iPad

  - by Justin

  I have a 16 GB iPad wifi I can't get to connect to VPN. The error I get is: "A connection could not be established to the PP server. Try reconnecting. If the problem continues, verify your settings and contact your Administrator." I have tried a variety of tasks to troubleshoot the issue: I have verified that another iPad on another network can connect to the VPN I am trying to connect to I can connect to this VPN from the same network the iPad uses on a Windows machine I have verified an iPhone user can connect to this VPN from a different network I have reset the iPad's network settings I have reset the entire iPad and restored settings I have compared my settings w/ a screenshot from the iPad that works and confirmed everything is correct I have used the IP address and domain name of our VPN server in the settings I have tried deleting the VPN settings in the iPad and recreating them I have verified in the logs of VPN server that I'm not even getting to the VPN server (no log entry) I have verified that I cannot VPN from the iPad on separate network (different ISP and router) Are there any other ways to troubleshoot VPN on an iPad?

  Read the article

• How do I set zone priority in Microsoft DNS?

  - by Justin

  I have a standard small network setup (20 users) on Active Directory. All Windows machines have a primary DNS server as the AD and a secondary DNS server as Google PDNS. I want to setup a DNS entry that exists in real DNS but set it up on our DC so that local requests would route this public domain to a local development machine on the network. I setup the zone in DNS which results in the clients resolving the public FQDN to our internal IP. However, sometimes it still resolves to the "real" value (I check by pinging it). Is there some way to give the zone definition in my DC DNS higher priority? Or will the client that has secondary public DNS always at sometimes have a competing entry for this zone?

  Read the article

• ntbackup workalike for adhoc full backups in Windows 7 thats free and preferably open source

  - by Justin Dearing

  On windows 2000 and XP machines I used to be able to do the following: ntbackup backup systemstate c: /f e:\backups\machineName\machineName-full+systemstate_200101206.bkf This gave me a full backup of the system that I could use to do a system restore, after doing a barebones OS install. Windows 7 has a great utility for regular backups with alerting and all that stuff. It does not seem to have command line support. I'd like a backup solution for my Windwos 7 systems that has the following features: Is free Is open source (preferebly) Works while the system is booted and leaves the system functional (clonezilla is great for offline backups, and I use that too) Gives me a backup that is suited for a full system restore or partial system restore (ruling out most imaging software even if they could work while the system is booted via some sort of shadow copy voodoo) Can work via the command line Compression would be nice, the ability to pipe output would be better.

  Read the article

• Top ten security tips for non-technical users

  - by Justin

  I'm giving a presentation later this week to the staff at the company where I work. The goal of the presentation is to serve as a refresher/remidner of good practices that can help keep our network secure. The audience is made up of both programmers and non-technical staff, so the presentation is geared for non-technical users. I want part of this presentation to be a top list of "tips". The list needs to be short (to encourage memory) and be specific and relevant to the user. I have the following five items so far: Never open an attachment you didn't expect Only download software from a trusted source, like download.com Do not distribute passwords when requested via phone or email Be wary of social engineering Do not store sensitive data on an FTP server I have two questions: Do you suggest any additional items? Do you suggest any changes to existing items?

  Read the article

• Active Directory replication failing with Access is Denied

  - by Justin Love

  I recently discovered that Active Directory replication started failing about a month ago. If I attempt to Replicate Now from the failing domain controller, I receive The following error occurred during the attempt to synchronize the domain controllers: Access is denied. It is between two servers at a remote site. One is Windows 2003 and the other is Windows 2000; the Windows 2000 machines is experiencing the errors. The domain is older OUR_DOMAIN style. Attempts so far: I disabled Kerberos service on the Windows 2000 server and restarted RPC and RPC locater services have expected settings HKEY_Local_Machine\Software\Microsoft\Rpc\ClientProtocols missing ncacn_nb_tcp on Windows 20003 server (added) Portqry reports okay Firewall disabled netdom resetpwd (and reboot) on Windows 2000 server.

  Read the article

• Community Event Leader Tools

  - by GavinPayneUK

  As many of you know, I run a small SQL Server community event here in the UK, SQL Server in the Evening, with the help of Coeo colleague and MVP Justin Langford.  There’s been half a dozen evening events in the last 16 months and recently it got to the point where I needed to start putting proper tools in place to communicate with my event’s followers.  As well as telling them when the next event is it’d also be nice to share some of the Chapter Leader mails I get from Pass etc.  ...(read more)

  Read the article

• Which AMI to to use for Java/Tomcat/MySQL in Amazon EC2?

  - by Justin

  I originally posted this on stackoverflow.com and it was suggested serverfault.com might be a better place to ask this question. So here goes: I'm trying to determine which Amazon Machine Image (AMI) to use as my Virtual Server in Amazon's EC2. For now, I'll need to choose an AMI that complies with the AWS Free Usage Tier. I want to deploy a Java app that I've been developing using Eclipse on Windows XP, Tomcat 7 and MySQL 5.5. I'm aware that I can choose the Basic 32-bit Amazon Linux AMI. Then I'd manually install Tomcat and MySQL (does MySQL get installed on the image or separately on an Elastic Block Store (EBS)?). Here's the rub, I'm a bit of a Linux noob. I can start Tomcat and tail the logs and such on Linux but I'm not familiar with the install process for Tomcat and MySQL on Linux and commands like sudo and chmod. I'm happy to get more hands on with Linux but I'm short on time right now. Are there AMI's that already have Tomcat and MySQL bundled? The Request Instance Wizard shows 805 Community AMI's that are Free Tier Eligible. 51 of the Free Tier Eligible AMI's have "Tomcat" in their name. I'm willing to consider using Elastic Beanstalk but my research thus far hasn't found any discussion of using MySQL with Beanstalk. The discussions all seem to use Amazon's SimpleDB. Any advice is greatly appreciated.

  Read the article

• How do I set the UNC permissions on a SQL Server 2008 Filestream UNC?

  - by Justin Dearing

  I have a SQL Server 2008 instance. I have configured filestream access properly, and use it from one column on one table in one of my databases. However, I cannot access the UNC share for the filestream data. I have tried browsing to it as well as trying to open specific files and I get errors both ways. I am running SQL Server 2008 enterprise on a Windows 7 workstation running on the domain. I've tried running the sql server service as a local user, then as network admin. The user I am logged in as is a local admin and a sysadmin in SQL server.

  Read the article

• Benefit of running redis as a daemon

  - by Justin Meltzer

  I'm trying to understand what the benefit of running redis as a daemon is. The redis default configuration seems not to run redis as a daemon, but locally on Mac OS X I added it to LaunchAgents, so I'm guessing it is running as a daemon anyway? Also on my remote application which is running on a linux server, since it won't have LaunchAgents (as far as I'm aware) will I have to run redis as a daemon? What will be the benefit of doing so?

  Read the article

• How can I scan from Canon PIXMA MX700 without disabling OS X firewall?

  - by Justin Love

  I have a Canon PIXMA MX700 connected by ethernet. When I first bought it I was using OS X 10.4, and scanner-initiated scanning worked fine. After upgrading to 10.6, neither scanner-initiated or scanning from MP Navigator EX works with the firewall enabled. The firewall lists exceptions for three applications: Canon IJ Network Scan Utility.app Canon IJ Network Scanner Selector.app MP Navigator EX 1.0.app I get no further blocked warnings, and /var/log/appfirewall.log lists nothing for today (my latest attempt to use it).

  Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >