Search Results

Search found 28344 results on 1134 pages for 'linux terminal'.

Page 13/1134 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

• Preinstalled Windows 8 and Linux UEFI dual boot on a laptop

  - by itchy355

  I am trying to set up Windows 8 and Arch Linux on a new Sony Vaio E14 with preinstalled windows 8. So far: installed W8 to my new SSD (switched for the original HDD) using Recovery Media shrunk the W8 partition, deleted recovery partition, disabled swap confirmed W8 booting just fine On to Arch: disabled Secure Boot in bios confirmed W8 booting just fine Booted Arch off the CD and installed everything to 4th and 5th partition set up rEFInd for EFIstub kernel bootloader After that it got worse. I was unable to boot anything else than Windows 8 (although I was glad that they at least kept working just fine). Tried: creating EFI\refind\ and putting the .efi there (as per Arch manual overwriting EFI\boot\bootx64.efi overwriting EFI\Microsoft\Boot\bootmgr.efi overwriting EFI\Microsoft\Boot\bootmgfw.efi --- YAY rEFInd shown up! So far, so good. I've kept the whole W8 Boot\ directory in EFI\windows8 and set up a boot menuentry for it; and it booted just fine. But, upon restart, everything was wrong -- 'Operating system not found' instead of any bootloader (refind or w8). Booted back into Arch using the live CD to find out that the EFI partition had erroneous FAT table. fsck.vfat fixed it, and I've found that EFI\Microsoft\Boot was back to it's original state (all refind files deleted and replaced with W8 bootloaders). I've overwritten them again and got back to rEFInd showing up correctly and Arch being perfectly bootable. After that I've tried only renaming EFI\Microsoft\Boot\bootmgfw.efi to bootmgfw.001.efi (then copying refind's .efi to bootmgfw.efi and keeping EVERY OTHER file as it was), but with exactly the same result. Tried marking the GPT EFI partition as read-only, same result. Now I'm kinda out of luck. Arch boots fine, so does W8 but it destroys the EFI partition in the process. Thanks for any ideas, Googling brought me this far and I can't find any better. PS -- windows 8 MAYBE destroys the partition upon shutdown -- when I order a shutdown in W8, it takes unusually long (about half a minute instead of ~5 seconds). So in theory I could solve this by hard-resetting the laptop instead of a normal shutdown, but that's just not nice.

  Read the article

• Open a File Browser From Your Current Command Prompt/Terminal Directory

  - by The Geek

  Ever been doing some work at the command line when you realized… it would be a lot easier if I could just use the mouse for this task? One command later, you’ll have a window open to the same place that you’re at. This same tip works in more than one operating system, so we’ll detail how to do it in every way we know how. Open a File Browser in Windows We’ve actually covered this before when we told you how to open an Explorer window from the command prompt’s current directory, but we’ll briefly review: Just type the follow command into your command prompt: explorer . Note: You could actually just type “start .” instead. And you’ll then see a file browsing window set to the same directory you were previous at. And yes, this screenshot is from Vista, but it works the same in every version of Windows. If that wasn’t good enough, you should really read how you can navigate in the File Open/Save dialogs with just the keyboard—now that’s a Stupid Geek Trick! Open a File Browser in Linux For this exercise, we’re going to assume that you’re using Gnome under a Linux flavor like Ubuntu, because that’s the most common. From your terminal window, just type in the following command: nautilus . And the next thing you know, you’ll have a file browser window open at the current location. You’ll see some type of error message at the prompt, but you can pretty much ignore that. You can also use “gnome-open .” if you want. Open Finder in Mac OS X All the Mac computers in this office are running Linux, so we haven’t had a chance to verify, but you should be able to use the following command on OS X to open Finder in the current terminal location: open . Open Dolphin on Linux KDE4 dolphin . Got any extra tips to help out your fellow readers? How do you do the same thing in KDE3? What about OS X? Leave your savvy advice in the comments, and maybe we’ll update the article. Or not. Either way, it’ll help somebody! Similar Articles Productive Geek Tips Keyboard Ninja: Concatenate Multiple Text Files in WindowsStupid Geek Tricks: Open an Explorer Window from the Command Prompt’s Current DirectoryHow to automate FTP uploads from the Windows Command LineShell Geek: Rename Multiple Files At OnceAdd "Open with gedit" to the right click menu in Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon

  Read the article

• Windows Server 2003- RDP functionality after removing Terminal Server temporary CALs

  - by Jack T

  I recently configured Windows Server 2003 Terminal Services for a client. The 90 day trial CAL period is about to expire, and my client has decided that he's too cheap to purchase CALs. He wants to use the 2 administrative RDP logons for remote access. Can I just uninstall Terminal Server to revert the RDP functionality back to that of the 2 administrative RDP logons, or is there something else that needs to be done? What's the best way to uninstall Terminal Services? Through Add/Remove Programs - Windows Components - uncheck Terminal Server or through the "Configure Your Server Wizard" by removing the Terminal Server role?

  Read the article

• How to change the terminal to SCO compliant in Ubuntu

  - by kaushik

  I have a server in which SCO 5.x is installed. I have several thin clients which were supplied from our head office. Those thin clients have linux pre-installed in them. When we tried to connect to our SCO server, we have found out that the thin client does not support SCO terminal type. So the program (Which is written in Oracle forms) is not working correctly. Lots of function keys stopped working and screen also not getting refreshed correctly. Hence we decided to use Ubuntu Live USB keys in thin clients. Now the problem is how can we change the terminal type to SCO in ubuntu ? Means I want it in the text terminal (Alt+Ctrl+F1,F2...) (Not in xterm...graphical terminal emulators). Does ubuntu support SCO terminal type ?

  Read the article

• Why does terminal auto complete sometimes not suggest anything?

  - by alex

  Sometimes, when I type a command on the terminal, the terminal's autocomplete does not work, even if my command is not wrong. For example, take look to this: sudo service vsftpd status sudo and service do not have any problem. I mean, when you type sud +tab terminal suggest you sudo or I type servi + tab terminal complete that to service. But for vsftpd I do not get any suggestion. Is there a way to say, "terminal, please tell me any suggestion!!?".

  Read the article

• How to clean launch a GUI app via the Terminal (so it doesn't wait for termination)?

  - by Peter.O

  Some GUI apps launch cleanly via the Terminal command line. Some don't, and they cause the Terminal to wait for the app to terminate. ...and even then, some don't "release" the command line. The mysterious ampersand "&" suffix, seems to cause the terminal to put the process into the background... (but I'm not sure what happens there). Is there a way to launch an app via the Terminal, so that there is no "hang on" effect? ... just like launching something via F2. I'd like to have the command line available again, immediately (without something still in the background and writing out system message in the terminal).

  Read the article

• What does the "build-essential" & "build-dep" Terminal commands mean & do in Linux based operating s

  - by Adam Siddhi

  Hi. I am researching how to install Ruby 1.9.1 in Xubuntu 10.04 and I came across the command build-essential and build-dep multiple times. Sometimes it is followed by packages and sometimes it is both preceded and post-ceded by packages. The 2 examples I am looking at are: sudo apt-get install build-essential zlib1g zlib1g-dev zlibc libruby1.9 libxml2 libxml2-dev libxslt-dev sudo apt-get build-dep ruby1.9 and sudo apt-get install ruby irb ri rdoc ruby1.8-dev libzlib-ruby libyaml-ruby libreadline-ruby libncurses-ruby libcurses-ruby libruby libruby-extras libfcgi-ruby1.8 build-essential libopenssl-ruby libdbm-ruby libdbi-ruby libdbd-sqlite3-ruby sqlite3 libsqlite3-dev libsqlite3-ruby libxml-ruby libxml2-dev Thanks :adam

  Read the article

• What does the "build-essential" Terminal command mean & do in Linux based operating systems like Ubu

  - by Adam Siddhi

  Hi. I am researching how to install Ruby 1.9.1 in Xubuntu 10.04 and I came across the command build-essential multiple times. Sometimes it is followed by packages and sometimes it is both preceded and post-ceded by packages. The 2 examples I am looking at are: sudo apt-get install build-essential zlib1g zlib1g-dev zlibc libruby1.9 libxml2 libxml2-dev libxslt-dev and sudo apt-get install ruby irb ri rdoc ruby1.8-dev libzlib-ruby libyaml-ruby libreadline-ruby libncurses-ruby libcurses-ruby libruby libruby-extras libfcgi-ruby1.8 build-essential libopenssl-ruby libdbm-ruby libdbi-ruby libdbd-sqlite3-ruby sqlite3 libsqlite3-dev libsqlite3-ruby libxml-ruby libxml2-dev Thanks :adam

  Read the article

• Oracle Linux Training Across Five Continents

  - by Antoinette O'Sullivan

  The Oracle Linux System Administration course, a top selling course, provides you with a broad selection of key competencies you need to be a great Linux system administrator. And you can now take this course from your desk or in classrooms across all five contents. You can take this 5-day instructor-led course through the follow delivery methods: Training-on-Demand: Start training within 24 hours of registering. You following lecture material at your own pace via streaming video and book time on a lab environment to suit your schedule. Live-Virtual Event: Follow a live event from your own desk, no travel required. You can choose from a selection of events on the schedule to suit a different time zones. In-Class Event: Travel to an education center to take this course. Below is a selection of the in-class events already on the schedule. AFRICA  Location  Date  Delivery Language  Nairobi, Kenya  13 October 2014  English  Johannesburg, South Africa  24 November 2014  English AMERICA  Location  Date  Delivery Language  Mississauga, Canada  27 October 2014  English  Chicago, IL, United States  13 October 2014  English  Roseville, MN, United States  13 October 2014  English ASIA  Location  Date  Delivery  Jakarta, Indonesia  20 October 2014  English  Petaling Jaya, Malaysia  25 August 2014  English  Kuala Lumpur, Malaysia  8 December 2014  English  Istanbul, Turkey  10 November 2014  Turkish   Dubai, United Arab Emirates  4 January 2015  English AUSTRALIA  Location  Date  Delivery Language  Canberra, Australia  20 October 2014  English  Melbourne, Australia  20 October 2014  English EUROPE  Location  Date  Delivery Language  Paris, France  6 October 2014  French  Milan, Italy  20 October 2014  Italian  Rome, Italy  8 September 2014  Italian  Bucharest, Romania  27 October 2014  Romanian  Madrid, Spain  1 September 2014  Spanish The Oracle Linux System Administration course is the recommended training course to prepare for you for the Oracle Linux 5 & 6 System Administrator OCA certification exam. Those who have acquired the skills provided in the Oracle Linux System Administration course, can advance their learning by taking the Oracle Linux Advanced Administration course. You can take this 5-day instructor led course as a live-virtual event or an in-class event. Below is a selection of the in-class events on the schedule:  Location  Date  Delivery Language  Jakarta, Indonesia  27 October 2014  English  Kuala Lumpur, Malaysia  6 October 2014  English  Bangkok, Thailand  20 October 2014  English  Belmont, CA, United States  15 September 2014  English For information on the Oracle Linux curriculum, go to http://oracle.com/education/linux.

  Read the article

• Open a new tab in gnome-terminal using command line.

  - by Vikrant Chaudhary

  Hi, When I write gnome-terminal --tab at the terminal, I expect it to open a new tab in the same terminal window. But it opens a new window instead. I found out that its intention is to open a new tab in a new window, i.e., if I write gnome-terminal --tab --tab it will open a new window with two tabs. So, the question is, how can I open a new tab in the current window using a command in gnome-terminal? I'm using Ubuntu 9.04 x64.

  Read the article

• Emacs/xterm color annoyance on Linux

  - by tgamblin

  I'm using emacs in a console window both on my local Linux box and on the login node of a remote cluster. I use emacs regularly, and I've got the foreground color set to white in my .emacs file like so: (set-foreground-color "white") (set-background-color "black") However, when I run emacs, the foreground isn't white; it's grey and very hard to read. On my Mac, emacs in a console window with the same settings shows up as proper white. But on both linux boxes, in konsole and xterm, it's grey. In case it matters, I've got TERM set to xterm-color, the desktop is running RHEL 5, and the cluster node is running RHEL 4 (CentOS). Is this some default with how Linux sets up terminal colors? How do I get white to be white? Note: this is with console emacs, not emacs under X. That's emacs -nw if you have DISPLAY set.

  Read the article

• How to restrict file system when logged into terminal services

  - by pghcpa

  What I need to accomplish: With one login, when user is physically in the building I need them to see everything. When they are using terminal services with same login they should not be able to see the file system on the network. I can lock down the PC running terminal services as that is its only use. Details: Windows/2003 Server with terminal services. One login for a user (e.g., johndoe). When johndoe logs into the network at his desk in the office, he can see the network files according to group policy. When johndoe logs into terminal services from outside the building, we do not want to allow him see the network. Using 2x to do a published app, but that app has a "feature" that allows user to see network. Published application on termina services (only) is a document management system that is tied to windows login, so I can't give them two logins. With one login, when they are in the building I need them to see everything. When they are using terminal services they should not be able to see the network. I can lock down the PC running terminal services as that is its only use.

  Read the article

• Become a Linux Terminal Power User With These 8 Tricks

  - by Chris Hoffman

  There’s more to using the Linux terminal than just typing commands into it. Learn these basic tricks and you’ll be well on your way to mastering the Bash shell, used by default on most Linux distributions. This one’s for the less experienced users – I’m sure that many of you advanced users out there already know all these tricks. Still, take a look – maybe there’s something you missed along the way. How to Own Your Own Website (Even If You Can’t Build One) Pt 2 How to Own Your Own Website (Even If You Can’t Build One) Pt 1 What’s the Difference Between Sleep and Hibernate in Windows?

  Read the article

• User receives group membership error to terminal server even though has rights

  - by BlueToast

  http://www.hlrse.net/Qwerty/TSLoginMembership.png To log on to this remote computer, you must be granted the Allow log on through Terminal Services right. By default, members of the Remote Desktop Users group have this right. If you are not a member of the Remote Desktop Users group or another group that has this right, or if the Remote Desktop User group does not have this right, you must be granted this right manually. Only as of today a particular user began receiving this message for a second terminal server they use; otherwise, they have never had any problems authenticating into this server. We have no restrictions on simultaneous and multiple logins. On each terminal server, we have a group and security group like "_Users" locally in the Builtin\Remote Desktop Users group. For this particular user, on this particular terminal server we have locally given him Administrator, Remote Desktop Users, and Users membership; in AD we have given him DOMAIN\Administrator, Builtin\Remote Desktop Users, DOMAIN\_Users. It still gives us that error message. We gave him membership to another terminal server (random) by simply making him member of another DOMAIN\_Users group -- successfully able to login to that random terminal server. So, from scratch we created an AD account 'dummy' (username) with only Domain Users membership. Tried to login to this particular server, no success. So I added 'dummy' to DOMAIN\_Users group, and then was successfully able to login. Other users from this user's department are able to login to this particular server just fine as well. We checked the Security logs on this particular server, and while it is logging everything, the only thing it appears to not log are these failed login attempts from this particular user who receives this error message. We have tried rebooting the server, and the user is still receiving that error message.

  Read the article

• How do I host a Windows Terminal (to run Windows applications and be accessed by users via a standar

  - by Ivan

  How do I host a Windows Terminal (to run Windows applications and be accessed by users via a standard MS Remote Desktop client) on a Linux server? I've heard there are some alternatives to Microsoft server software for this purpose.

  Read the article

• How do I change my default terminal to use ZHS in Ubuntu?

  - by blackrobot

  I want to change my default terminal in Ubuntu to ZHS. What's the command to do this?

  Read the article

• 8 Deadly Commands You Should Never Run on Linux

  - by Chris Hoffman

  Linux’s terminal commands are powerful, and Linux won’t ask you for confirmation if you run a command that won’t break your system. It’s not uncommon to see trolls online recommending new Linux users run these commands as a joke. Learning the commands you shouldn’t run can help protect you from trolls while increasing your understanding of how Linux works. This isn’t an exhaustive guide, and the commands here can be remixed in a variety of ways. Note that many of these commands will only be dangerous if they’re prefixed with sudo on Ubuntu – they won’t work otherwise. On other Linux distributions, most commands must be run as root. Image Credit: Skull and Crossbones remixed from Jason Ford on Twitter How To Create a Customized Windows 7 Installation Disc With Integrated Updates How to Get Pro Features in Windows Home Versions with Third Party Tools HTG Explains: Is ReadyBoost Worth Using?

  Read the article

• Linux Learning curve for a 'Lifetime' windows user [closed]

  - by gary

  I am using windows for almost 8-10 years and have never worked on linux. Mostly i used to work in VB, VC++ MFC and little bit of .NET(C# and VB) so i didn't bother about Linux. But now when i got an opportunity to work with linux i dont want to miss it, here are my questions : Where can i find useful resources for Linux newbies? Which books/Tutorials will you suggest to start? Which distro shall i use? What was your experience while moving from Windows to Linux?

  Read the article

• Where can I find linux-kernel-headers-x.x.x.x for SUSE?

  - by Landy

  I'm installing VMware Workstation on a SLED 11 SP1, and the installation is blocked by an error message "Kernel headers for version 2.6.32.27-0.2-default were not found". If you installed them in a non-default path you can specify the path below. Otherwise refer to your distribution's documentation for installation instructions and click Refresh to search again in default locations. The output of rpm -qa | grep kernel is kernel-default-2.6.32.27-0.2.2 kernel-default-base-2.6.32.27-0.2.2 linux-kernel-headers-2.6.32-1.4.13 kernel-default-extra-2.6.32.27-0.2.2 nfs-kernel-server-1.2.1-2.10.1 I had met this issue in Ubuntu and I installed the required linux header via apt-get then the issue disappeared. But in SLED, I didn't find the rpm package in SUSE's software repository, and I also google "linux-kernel-headers-2.6.32.27" but did not match any documents. Any suggestion will be highly appreciated. Thanks. The output result of zypper se kernel | grep kernel is i | linux-kernel-headers | Linux Kernel Headers | package | linux-kernel-headers | Linux Kernel Headers | srcpackage

  Read the article

• Linux Kernel Messages: ata1.00: status: { DRDY ERR }

  - by PM

  I am receiving a lot of these messages. Is my HD going to die tomorrow morning? ata1: link is slow to respond, please be patient (ready=0) ata1: device not ready (errno=-16), forcing hardreset ata1: soft resetting link ata1: clearing spurious IRQ ata1: clearing spurious IRQ ata1: clearing spurious IRQ ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: qc timeout (cmd 0xa0) ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)

  Read the article

• Networked Parallel Port in Linux / KVM / QEMU

  - by korkman

  What I want to use is the "-parallel" tcp or udp option from KVM / QEMU, but I don't seem to find any server for this client. I don't serve a printer but a hardware dongle. I checked ser2net, which does provide "/dev/lp0" sharing, but it doesn't seem to work for KVM / QEMU. I suspect KVM / QEMU requires "/dev/parport0". I did rmmod lp, modprobe ppdev, linked ser2net to parport0, but it didn't work out. Perhaps ser2net is not suited for this. I tried socat as well, and I tried netcat. No success. Does anyone know any KVM / QEMU compatible parallel port server? Or did any of netcat, socat or ser2net work for you?

  Read the article

• Passwords and Keys in Linux

  - by PeanutsMonkey

  In a fit of desperation when I had my wireless connection die on me, I thought it was a problem with the key I had created at the start when I initially configured the wireless connection and hence deleted it. The option to create the key had presented itself when I created the wireless connection. It no longer asks me to. Now I am back online, do I have re-create the password and key I had before? If so, what do I choose and why? The options I have are as follows; PGP Stored password Password keyring Secure shell key The first and last option seem to be obvious and I have no idea about the differences between the second and third options. Why do I need a stored password or password keyring in all scenarios and not just the wireless issue I ran into? EDIT 0 Further to Belisama's comment, I have amended my question. EDIT 1 As requested, I have attached a screenshot

  Read the article

• Linux Mint 14 severe overheating

  - by agvares

  I've tried switching to Mint (it was Mint 12) about 6 months ago, but failed to do it due to enormous overheating which made it virtually impossible to run any applications more complex than Gedit. Time had passed, and now I'm back again with Mint 14, but feeling way more determined. What I face are the following issues: 1) Great overheating (and by great I mean that just by doing nothing my CPU temp is floating around 70-75 C, which I find a lot) 2) Running multiple applications (let's say Chrome, Skype and Pidgin) results in critical overheating and immediate shutdown of the system 3) Due to the stuff listed above, my battery drains in about 10-15 minutes, pretty much turning my laptop into a crippled desktop machine I've got a HP-dv6 laptop (i7, 6gb RAM, dual graphics) Here's the output of lspci: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler XT [AMD Radeon HD 6700M Series] 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0d:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 13:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01) 19:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) what i've tried to do already: 1) I've edited my grub file to add some "splash" arguments there 2) Installed jupiter and powertop 3) Tried to upgrade to newer kernels (up to 3.8), btw running anything newer than 3.5 results in both resolution and wi-fi detection fail 4) Read lots of forum threads devoted to the topic So, my question is simple: What else might I do to become finally able to use Mint as my default OS without the risk of being burned alive by the CPU heat?

  Read the article

• Linux (Ubuntu 12.04) two gateways one nic

  - by David

  I have Ubuntu 12.04 Server edition Two gateways, both on 192.168.0. network, let's make them 192.168.0.1 and 192.168.0.2 I've read you should be able to add second gateway into /etc/network/interfaces, that it will build out all the routing automatically, but I get "duplicate option" error. So if I have one default gateway, let's say 0.1, and a connection comes through from the 0.2 gateway, my understanding is that it still tries to respond through 0.1 gateway. Can we change this behavior?

  Read the article

• Change default DNS server in Arch Linux

  - by AntoineG

  I'm in Viet Nam and most social websites (Facebook, Twitter and the likes - even reddit) are blocked by the ISP DNS server. I tried to change the DNS server of my Arch box using the resolv.conf file, but it failed miserably since dhcpd generates this file automatically everytime I connect to the LAN. I've been looking around to try and find out how to fix this, without success. Either I s*ck at Googling, either it is non-trivial to do so. EDIT 1: Meh, apparently posting it here made me feel guilty and I had to push my search a bit more. I found the same article than Ankur post below. This is what I made, if anybody ever faces the same problem: $ sudo gvim /etc/dhcpcd.conf Add "nohook resolv.conf" at the tail of the file. $ sudo gvim /etc/resolv.conf Add to the file (OpenDNS servers): nameserver 208.67.222.222 nameserver 208.67.220.220 Or (Google DNS): nameserver 8.8.8.8 nameserver 8.8.4.4 Then, verify it worked (need package dnsutils): $ dig www.facebook.com ; <<>> DiG 9.9.1-P1 <<>> www.facebook.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 16994 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 1 ;; OPT PSEUDOSECTION: ; EDNS: version: 0, flags:; udp: 4096 ;; QUESTION SECTION: ;www.facebook.com. IN A ;; ANSWER SECTION: www.facebook.com. 89 IN A 69.171.224.53 ;; Query time: 87 msec ;; SERVER: 208.67.222.222#53(208.67.222.222) ;; WHEN: Thu Jun 28 00:43:23 2012 ;; MSG SIZE rcvd: 61 See ;; SERVER: 208.67.222.222#53(208.67.222.222), it worked.

  Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >