Search Results

Search found 372 results on 15 pages for 'macs'.

Page 13/15 | < Previous Page | 9 10 11 12 13 14 15  | Next Page >

• linux container bridge filters ARP reply

  - by Dani Camps

  I am using kernel 3.0, and I have configured a linux container that is bridged to a tap interface in my host computer. This is the bridge configuration: :~$ brctl show bridge-1 bridge name bridge id STP enabled interfaces bridge-1 8000.9249c78a510b no ns3-mesh-tap-1 vethjUErij My problem is that this bridge is dropping ARP replies that come from the ns3-mesh-tap-1 interface. Instead, if I statically populate the ARP tables and ping directly everything works, so it has to be something related to ARP. I have read about similar problems in related posts, and I have tried with the solutions explained therein but nothing seems to work. Specifically: ~$ grep net.bridge /etc/sysctl.conf net.bridge.bridge-nf-call-arptables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-filter-vlan-tagged = 0 net.bridge.bridge-nf-filter-pppoe-tagged = 0 arptables and ebtables are not installed. iptables FORWARD is all set to accept: Chain FORWARD (policy ACCEPT) target prot opt source destination The bridged interfaces are set to PROMISC: ~$ ifconfig ns3-mesh-tap-1 Link encap:Ethernet HWaddr 1a:c7:24:ef:36:1a ... UP BROADCAST PROMISC MULTICAST MTU:1500 Metric:1 vethjUErij Link encap:Ethernet HWaddr aa:b0:d1:3b:9a:0a .... UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 The macs learned by the bridge are correct (checked with brctl showmacs). Any insight on what I am doing wrong would be greatly appreciated. Best Regards Daniel

  Read the article

• Dynamic DNS Updates with Wireless and Wired interfaces

  - by Phaedrus

  We have offices full of Windows & Mac users who obtain IP addresses from a Windows DHCP server, which in turn updates Dynamic DNS entries. We are noticing major inconsistencies with the entries, and have found that the problem is occurring more on Macs than on windows, and even more when users are frequently switching from wired to wireless adapter, which makes sense, as this sequence occurs: User enables wired adapter and registers Proper DNS User enables wireless adapter and registers 2nd proper DNS entry user switches off wireless manually and 2nd entry remains improperly until scavenge. Our help desk folks rely heavily (maybe more than they should) on the dynamic entries as part of their business process. For example, the user submits a help desk ticket, and the staff member expects to be able to remote desktop to their machine by hostname, which is hyperlinked in the helpdesk ticketing app. We have implemented multiple solutions & band-aids to different symptoms of the problems such as: Using DNS Reservations for Macintosh PCs Using DNS Scavenging to remove old records Switching from a Cisco DHCP server to the Windows DHCP Server But no matter what we do, it seems impossible to maintain perfect records. Has anyone encountered this problem before? What is industry best practice? Comments & Suggestions are much appreciated, /P

  Read the article

• Difficult to point-and-click target with Apple Magic Trackpad?

  - by Andrew Swift

  My Magic Trackpad is great for most things involving dragging and gestures, but for simple point-and-click use it is starting to get really annoying. For example, my bank has a numeric code that I need to enter from a visual grid on the screen, by clicking on the six numbers in order. To do this is quite difficult with the Magic Trackpad. Idea 1: it is because when you start dragging on the touchpad, there is a brief delay before the mouse starts to move. The delay might be enough to screw up my anticipation of where the cursor is going to go. Idea 2: it may have to do with the cursor acceleration. If I move it a little, the cursor moves a little. If I move it a lot, it goes much faster. I have tried various settings in the preference pane, and although the cursor does move more or less quickly, it doesn't seem any more or less easy to hit a given target. As I am writing this post, I tried a brief experiment -- I chose a spot on the page (the bracket in the superuser logo) and tried to move the cursor there in one quick movement. It's extremely difficult, even though I've been using Macs and touchpads since 1999. There is something about the behavior of the trackpad that is making it impossible for me to learn how to accurately predict where the cursor will end up. Does anyone else have this problem?

  Read the article

• Mavericks permission issues with Windows Server deduplicated shares

  - by dmohlmaster

  We have a number of 10.9-10.9.3 - Mavericks - machines installed throughout our facility. Much of the user content is pulled from shares stored on our Windows Server 2012 fileservers with deduplication enabled. I have found that files newly written or unoptimized are able to be accessed without issue - read, written, modified, etc. Once the file gets optomized/deduplicated and Windows adds the P & L attributes - sparse and symlink - the Macs running Mavericks begin to have access issues. Once the files get deduplicated, users begin receiving read access errors when copying files (see error1 below). This happens when copying to folders within the current folder tree or copying somewhere to the local system. If you 'stop' the copy operation and retry a few more times, it may eventually work for the specific instance but fail again later. I am however, able to copy these files without issue via the terminal. Other systems running 10.7 do not experience the same issues and are able to access file server resources without issue. Many of the systems having issues are newer and thus not able to be downgraded to 10.8 or 10.7. I have tried finder replacements such as Pathfinder but the results are the same. I know this is at least similar to the issues many Mac users are already experiencing and posting about but I haven't seen it directly linked to deduplication and the attributes written by Windows server. Has anyone seen this issue? Have any solutions been found? Error 1: When copying files after the PL attributes have been set by deduplication. "One or more items can't be copied to "Foler" because you don't have permissions to read them. ******************************************' Via the system.log, I am also seeing the following error when accessing these deduplicated file shares. The reparse point tag listed below is "IO_REPARSE_TAG_DEDUP" Reported error: "smbfs_nget: filename.ext - unknown reparse point tag 0x80000013"

  Read the article

• Network Security Device/Software

  - by Campo

  We currently run Symantec Antivirus Corporate 10.2. The software is really easy to manage on a network but the actual virus detection isn't bad but the malware detection is crap. We recently were infected with a email bot that got us put on some block lists. This has been resolved. I cannot have that happen again. I would like to find a program as easy to manage as symantec that I can install on all the user's workstations as well as the servers. We run a windows 2003 domain. We have a couple 2008 test servers in the environment. Most of the workstations are xp though I am using windows 7 and symantect is not compatible with this OS... So we need a solution that would cover all those operating systems. If it could be installed on macs too that would be a bonus though not necessary at all. This software must detect: Viruses AND Malware I am looking for something that combines the features in anti-malware programs like malwarebytes or spybot with an antivirus program like symantec or AVG. Alternatively if there is a piece of hardware that is a firewall, router, and packet inspection for virus/spam that would be the most ideal solution. I then could supplement with a piece of software that could pickup what the hardware misses. Thank you for your suggestions.

  Read the article

• Track kids browsing history even when they know how to clear it manually

  - by Darren Newton

  I have a colleague with two teenage boys (yes, cue cliche's about 'I have this friend see...') He's currently having issues with them browsing pr0n and wants to do a little spying on their browsing (I'm staying clear of the philosophies/ethics on this.) The kids are savvy enough to clear their browsing history when they're done. As I'm his goto for IT he has asked me if there is a way to keep a hold of the browsing history. The family uses Macs, and the kids surf with Safari. I know that browsing history is kept here ~/Library/Safari/History.plist. I figure there should be a way to write either an AppleScript or other script (Python/Ruby/Bash) that can backup this file to a different location (/opt/local/history, etc.) Since the kids know to clear their history when they're done should the file be periodically backed up with something similar to a cron job or something like Hazel? While that could work it seems like it would create a ton of little incremental backups. Or is it possible to 'watch' ~/Library/Safari/History.plist and incrementally add changes to a backup file (saving a diff so to speak) but not lose any data? Any ideas/solutions appreciated. UPDATE/EDIT: Got the word from concerned dad that the oldest uses Firefox on a different PC, so the OpenDNS solution (preferably at the router level) is the best answer so far as it would capture usage for the whole house.

  Read the article

• Difficult to point-and-click target with Apple Magic Trackpad?

  - by Andrew Swift

  My Magic Trackpad is great for most things involving dragging and gestures, but for simple point-and-click use it is starting to get really annoying. For example, my bank has a numeric code that I need to enter from a visual grid on the screen, by clicking on the six numbers in order. To do this is quite difficult with the Magic Trackpad. Idea 1: it is because when you start dragging on the touchpad, there is a brief delay before the mouse starts to move. The delay might be enough to screw up my anticipation of where the cursor is going to go. Idea 2: it may have to do with the cursor acceleration. If I move it a little, the cursor moves a little. If I move it a lot, it goes much faster. I have tried various settings in the preference pane, and although the cursor does move more or less quickly, it doesn't seem any more or less easy to hit a given target. As I am writing this post, I tried a brief experiment -- I chose a spot on the page (the bracket in the superuser logo) and tried to move the cursor there in one quick movement. It's extremely difficult, even though I've been using Macs and touchpads since 1999. There is something about the behavior of the trackpad that is making it impossible for me to learn how to accurately predict where the cursor will end up. Does anyone else have this problem?

  Read the article

• How to prevent eMule from jamming up the router?

  - by the searcher

  Usually, when eMule is started, after some time, I find that the router is jammed, so the internet connection on that computer stopped working, or it seemed to be waiting for some port to be freed up before it can connect to a website. This sometimes affect even other PCs or Macs using the same router. Is there a way to prevent eMule from hogging too much resource or ports? I see that there is under Options -> Connection "Max Sources/File" and a "Connection Limits - Maximum Connections". Right now I set them to really low numbers: the first to 120 and the second to 200, but what are good numbers to fill in there so that it can work well without jamming up the router or use up the network resource of the PC or Mac? Or could it be that the number of files that are "Waiting" is too high, and used up too much resource? (If so, can emule automatically limit the number to 10 or 20 to prevent using too much resource?) (This happened before on Linksys router, Netgear router, and the AT&T U-verse router.)

  Read the article

• Industrial strength cloud file storage

  - by ArthurG

  I'm looking for an industrial strength cloud file storage system. It will be used by multiple people in a startup. Our requirements: Transparent file system access: files and folders in the file system must be able transparently access (read and write) files in the cloud; files must be synchronized whenever network access is available and buffered otherwise. The system must be usable by non-technical people. Access control: we need to control who can access which files, at least on a very coarse basis. e.g., the developers will be able to access the system design documents, only the corporate folks can access recruiting documents, and only management can access certain corporate documents. Dropbox provides this via Sharing folders, but that's not adequate, if I understand it correctly, because there's no authentication of the sharing user. so the cloud service should have a notion of an account (our startup) with multiple users with distinct credentials and rights for each user Clients: it must be accessible from Macs and PCs; I would hope that it supports Linux (e.g., Ubuntu) too Security: it must provide robust security Backup: the cloud service must reliably backup the files Versioning: change version history, is a big plus, but not required Not free: we're willing to pay for the service So far, we've reviewed the following, albeit not completely thoroughly: Dropbox: has all except 1) Access control, which is provided via Sharing folders, but that's not adequate, if I understand it correctly, because there's no authentication of the sharing user. and 2) Security, as discussed here http://www.economist.com/blogs/babbage/2011/05/internet_security and here http://blog.dropbox.com/?p=821. Windows Live Mesh, has all except 1) Clients, only supporting Windows 7 and OS X. SpiderOak has all, except 1) Transparent file system access, which is only available for 1 user. Amazon Cloud, doesn't offer 1) Transparent file system access Rackspace Cloud Drive has all except 1) Access control and 2) Versioning I'll gladly include any clarifications or additional systems the community provides. Arthur

  Read the article

• How to setup the Mac OS X Terminal so it's *just peachy*?

  - by kch

  Hi all, My Terminal is awesome, has every detail just right (for me anyway), and now I'm setting up a few new macs around here and I have no idea whatsoever how to get their terminals to a pretty state. My user account is rather old, has been migrated over many OS X releases and machines, so my Terminal setup has grown rather organically over the years. What I need is a recipe to start from scratch, so 1) I know what I've done, and 2) I can reproduce it anywhere. Things I'm looking for: Full UTF8 support. Setting LC_*, displaying characters correctly, accepting input… I hear this got much easier in 10.5, maybe it all works out of the box now? Setup of OS X-style keyboard text navigation (option-arrows, etc) How you particularly handle meta-key support? (other than ESC'ing your way around) Other things to help our n00bs get around in the shell, such as: List of useful default key bindings (^A, ^D, etc…) Mac-specific .profile, .inputrc goodness Mac-specific tools such as pbpaste & pbcopy, Open Terminal Here, etc If at all possible, a list of files to copy over to another machine that encompasses all the changes made to tune the Terminal. (dotrc files, plists, etc) And, well, anything else really. Just keep the scope on the Mac OS X Terminal application, rather than general unix setup and tools. I think a collection of incomplete answers would be a good start. Post one or two things you remember having done, we'll vote them up, and after a few days I'll try to compile it all into a summary answer.

  Read the article

• Convert MPG w/ AC3 audio to something else - on a Mac

  - by anonymous coward

  I'm helping with a small volunteer media team, and they have several .mpg videos that don't appear to have sound when played in QuickTime, iTunes, Real Player, etc, on the local Mac machine. I was able to hear audio after transferring one of the movies to a Windows machine that had VLC media player on it. Through VLC I was able to discover that the audio stream is a52 / AC3 format. We use Autodesk Cleaner in our normal workflow of converting the format of our videos to FLV, but for some reason it's unable to convert this particular batch of videos (well, the video converts fine, but with no audio). Obviously, it seems that there's a codec issue here, but I'm not sure how to correct it. (I'm not extremely familiar with Macs, and/or Autodesk Cleaner). I've seen the Perian codec pack, but I'm not sure that having the codecs on the system will enable Cleaner to convert these videos (particularly the audio stream, since the video converts fine). Is there something obvious that I'm overlooking, or will we have to use something else for this particular batch of videos? If so, what?

  Read the article

• Same native and tagged vlan possible on Redhat?

  - by Chris Phillips

  Hi guys and gals, I'm looking at implementing a systems using a number of tagged and a native vlan connected to a server over a a/p bonded interface. The untagged vlan is for physical machine access, the tagged vlans are connected to bridges and then to QEMU VM's inside the machine. Hopefully this plan is fine, but I'm trying to implement a crippled version of this in a dev environment due to a lack of underlying network config in this location where I just have the same single vlan delivered to the machine on a tag AND plain. I'm nto clear if this is going to work (and that I should just be confident that it will work using different vlans) as I'm seeing odd things like a vm is arping out over the vlan out to the core switch, but the arp reply is coming back on the untagged interface. Now an ARP reply is unicast right? So it's a deliberate thing to send the ARP response on the untagged interface, and not a case that a broadcast response isn't being passed on the tagged side... i.e. there's some underlying logic pushing it that way. Something about the MACs somehow? This is on a CentOS 5.5 machine, vlan's from vconfig. (I've seen reference to the Linux mac-vlan project work, but that's not available here by default.) so 1) Should having the SAME vlan tagged and untagged work? 2) Will different tagged vlans to the untagged interface work nice and easily?

  Read the article

• How can I automatically synchronize a directory tree on multiple machines?

  - by Blacklight Shining

  I have two Mac laptops and a Debian server, each with a directory that I would like to keep in sync between the three. The solution should meet the following criteria (in rough order of importance): It must not use any third-party service (e.g. Dropbox, SugarSync, Google whatever). This does not include installing additional software (as long as it's free). It must not require me to use specific directories or change my way of storing things. (Dropbox does this IIRC) It must work in all directions (changes made on /any/ machine should be pushed to the others) All data sent must be encrypted (I have ssh keypairs set up already) It must work even when not all machines are available (changes should be pushed to a machine when it comes back online) It must work even when the /directories/ on some machines are not available (they may be stored on disk images which will not always be mounted) This can be solved for Macs by using launchd to automatically launch and kill (or in some way change the behavior of) whatever daemon is used for syncing when the images are mounted and unmounted. It must be immediate (using an event-based system, not a periodic one like cron) It must be flexible (if more machines are added, I should be able to incorporate them easily) I also have some preferences that I would like to be fulfilled, but do not have to be: It should notify me somehow if there are conflicts or other errors. It should recognize symbolic and hard links and create corresponding ones. It should allow me to create a list of exceptions (subdirectories which will not be synced at all). It should not require me to set up port forwarding or otherwise reconfigure a network. This can be solved by using an ssh tunnel with reverse port forwarding. If you have a solution that meets some, but not all of the criteria, please contribute it in the comments as it might be useful in some way, and it might be possible to meet some of the criteria separately. What I tried, and why it didn't work: rsync and lsyncd do not support bidirectional synchronization csync2 is designed for server clusters and does not appear to work with machines with dynamic IPs DRBD (suggested by amotzg) involves installing a kernel module and does not appear to work on systems running OS X

  Read the article

• Linux on MacBook Air

  - by enduser

  I'm thinking of getting a MacBook Air. The answers to this post will help me make my decision. My questions and my understanding of current solutions are: How difficult is it to install a Linux-based OS (like Fedora or Ubuntu)? I've heard a little about rEFIt, but am not sure what to make of it. Is it completely necessary? Do I still need it if I don't plan to dual boot with Mac OS X? Also a dual-boot isn't necessary, I'd just like to run Fedora/Ubuntu by itself, but I'm curious to know if a dual boot is simple. Does everything 'just work'? In my current laptop I need to add a wireless driver (Broadcom card). I've heard Macs use Broadcom wireless cards. Will this be an issue? How about graphics/touchpad (& multitouch)/sound? I'm aware there are tutorials out there on how to install some older version of some os on your Mac, but my questions are a bit more general: Will it be easy to use (install and configure drivers for) recent Linux distributions with a new MacBook Air? Note: I don't mind extra configuration, but would like to know where it'll be necessary, because if it's too much of a hassle I'll look at other hardware.

  Read the article

• Made a .dmg for a project; user can't open it - "no mountable file systems"

  - by dragonridingsorceress

  Hello, We don't know a great deal about Macs. We had to make an installer, and were told to try a .dmg So we put together version 1, and it seemed to work. We had one application file, which had our icon, and one folder. The user was instructed to drag these into the Applications folder, of which there was the Mac version of a shortcut in the dmg. Then we were told we needed to update files, and assured that we could do so via drag-and-drop. So we did; we dragged them into the folder in the dmg. We tested it (on the computer we were using to edit the dmg) and it seemed to work. So we burnt it onto a disk (along with a windows installer that actually works!). I've just gotten an email from the recipient. She's got a Mac laptop. She inserted the disk, doubleclicked on it, doubleclicked on the .dmg, and got a Warning: no mountable file systems. Screenshot: http://www.flickr.com/photos/97292258@N00/5101670174/ I have the dmg (not on a disk) and am able to open it with no difficulty. How can we get it to work for our recipient?

  Read the article

• What causes this sonar sound on OS X?

  - by Richard Metzler

  Both of my Macs play this sonar sound that sounds like "ping ping ping ping" with a small amount of delay / echo. It occurs to me that it is played once a day but I'm not sure why. I checked iCal but didn't found anything (I don't use iCal anyways but maybe it's connected to Google calendar or my iPhone). I've heard this sound played by both my MacBook and my iMac but not yet simultaneously. Update This sound is not submarine.aiff. It sounds much more like what skub linked to but there are 4 "pings" instead of 1. It is played at different times (today around 5pm and again at 8.45, but as far as remember not everyday). That's why I'm not sure I could record it, but I could try. The sound might come from my iPhone, though I'm not sure which apps are alowed to play sound when they are not running. Also I don't see any indication in the message center or something similar. I think I have to start taking notes on which apps running.

  Read the article

• Information on the BMPP File Extension/Format

  - by Angel Brighteyes

  I am looking for information on the file type BMPp. Namely I need an application that can create this file type, preferably open source or free. Wikipedia says for BMP File Format that 'BMPp' is a "type code", which is the "mechanism used by pre-OSX Macs ... to denote a files format..." (Look in the little info-box of general information under "Type code"). Continuing my research, I found an old 2009 archived mailing list "Re: Incorrect png file type 'PNG' that talks about something related to another problem a developer is having. In the response he talks about there being variant file types, and lists BMPp as being linked to an old version of Graphics Converter. The company Lemkesoft sells Graphics Converter, which I am not willing to purchase. I can't imagine that the only program in existence to make a BMPp file is that program. There has got to be another way to make that file type, other than creating a BMP file and just renaming it to BMPp (unless of course it is really that easy)? This is the first time I've run into this file format, and it took a bit on Google, Bing, and Wikipedia to find the information that I've posted here. Any further help would be appreciated.

  Read the article

• No internet through a web browser but Skype still works

  - by kim3er

  We get our office broadband through a BT Business Broadband WiFi router. We have a mixture of macs and windows PC/laptops connecting to it at any one time. All devices are able to connect to the wireless signal with pretty much full signal. However, only two computers (one windows, one os x) are able to consistently connect to the internet. The other three (one windows, two os x), while they can always connect to the wifi, exhibit one of three characteristics. No internet at all. Programs like Skype work, but no internet through a browser. Internet works, but with intermittent lag when switching between different sites. I'm assuming while trying to resolve different addresses. Ignoring point 1 for moment, my gut is telling me DNS. It is an up to 20MB line that usually gets to between 13MB and 15MB downstream. The router is capable of dealing with the amount of wireless devices that we're throwing at it. Has anyone got any suggestions for how I might further diagnose this problem (preferably in OS X)? Rich

  Read the article

• Multiboot USB (OSX only): How to customize partition name?

  - by wrk2bike

  Trying to deal with all the Mac OSX recovery disks I've got by moving them to bootable USB images. I've got a big USB drive with multiple partitions for each recovery disk, and it's easy to use Disk Utility to "restore" the recovery DVD to a partition. When I boot my target Mac while holding down the Alt key, I can see all my bootable images and they work great. Problem is, they've all got the same name: "Mac OS X Install DVD." I manage Macs of various vintages. If my target Mac needs 10.6.3 for example, my only option seems to be to try each one until I get past the "Mac OSX can't be installed on this computer" message. I originally named my partitions with the OSX revision number, but that name is replaced by the disk image name during Disk Utility restore. Is there any way to customize the name during or after Disk Utility restore? I tried making a new DVD image on disk first and renaming it, but when I restore it to my recovery partition it has the original name. EDIT: After booting to the wrong partition, and getting the "..can't be installed" message, I can open the Startup Disk menu and see the other partitions - and as I select each one, the info at the bottom indicates which OS revision is on that partition. So I know the info is in there! Just want it at the boot screen if possible.

  Read the article

• Linux router: ping doesn't route back

  - by El Barto

  I have a Debian box which I'm trying to set up as a router and an Ubuntu box which I'm using as a client. My problem is that when the Ubuntu client tries to ping a server on the Internet, all the packets are lost (though, as you can see below, they seem to go to the server and back without problem). I'm doing this in the Ubuntu Box: # ping -I eth1 my.remote-server.com PING my.remote-server.com (X.X.X.X) from 10.1.1.12 eth1: 56(84) bytes of data. ^C --- my.remote-server.com ping statistics --- 13 packets transmitted, 0 received, 100% packet loss, time 12094ms (I changed the name and IP of the remote server for privacy). From the Debian Router I see this: # tcpdump -i eth1 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 7, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 8, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 8, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 9, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 9, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 10, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 10, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 11, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 11, length 64 ^C 9 packets captured 9 packets received by filter 0 packets dropped by kernel # tcpdump -i eth2 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth2, link-type EN10MB (Ethernet), capture size 65535 bytes IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 213, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 213, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 214, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 214, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 215, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 215, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 216, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 216, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 217, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 217, length 64 ^C 10 packets captured 10 packets received by filter 0 packets dropped by kernel And at the remote server I see this: # tcpdump -i eth0 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 1, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 1, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 2, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 2, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 3, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 3, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 4, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 4, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 5, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 5, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 6, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 6, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 7, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 7, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 8, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 8, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 9, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 9, length 64 18 packets captured 228 packets received by filter 92 packets dropped by kernel Here "X.X.X.X" is my remote server's IP and "Y.Y.Y.Y" is my local network's public IP. So, what I understand is that the ping packets are coming out of the Ubuntu box (10.1.1.12), to the router (10.1.1.1), from there to the next router (192.168.1.1) and reaching the remote server (X.X.X.X). Then they come back all the way to the Debian router, but they never reach the Ubuntu box back. What am I missing? Here's the Debian router setup: # ifconfig eth1 Link encap:Ethernet HWaddr 94:0c:6d:82:0d:98 inet addr:10.1.1.1 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::960c:6dff:fe82:d98/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:105761 errors:0 dropped:0 overruns:0 frame:0 TX packets:48944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:40298768 (38.4 MiB) TX bytes:44831595 (42.7 MiB) Interrupt:19 Base address:0x6000 eth2 Link encap:Ethernet HWaddr 6c:f0:49:a4:47:38 inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6ef0:49ff:fea4:4738/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:38335992 errors:0 dropped:0 overruns:0 frame:0 TX packets:37097705 errors:0 dropped:0 overruns:0 carrier:1 collisions:0 txqueuelen:1000 RX bytes:4260680226 (3.9 GiB) TX bytes:3759806551 (3.5 GiB) Interrupt:27 eth3 Link encap:Ethernet HWaddr 94:0c:6d:82:c8:72 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:20 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3408 errors:0 dropped:0 overruns:0 frame:0 TX packets:3408 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:358445 (350.0 KiB) TX bytes:358445 (350.0 KiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:2767779 errors:0 dropped:0 overruns:0 frame:0 TX packets:1569477 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:3609469393 (3.3 GiB) TX bytes:96113978 (91.6 MiB) # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.8.0.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 127.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 lo 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth2 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth2 # arp -n # Note: Here I have changed all the different MACs except the ones corresponding to the Ubuntu box (on 10.1.1.12 and 192.168.1.12) Address HWtype HWaddress Flags Mask Iface 192.168.1.118 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.72 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.94 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.102 ether NN:NN:NN:NN:NN:NN C eth2 10.1.1.12 ether 00:1e:67:15:2b:f0 C eth1 192.168.1.86 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.2 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.61 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.64 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.116 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.91 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.52 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.93 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.87 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.92 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.100 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.40 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.53 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.1 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.83 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.89 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.12 ether 00:1e:67:15:2b:f1 C eth2 192.168.1.77 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.66 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.90 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.65 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.41 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.78 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.123 ether NN:NN:NN:NN:NN:NN C eth2 # iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination # iptables -L -n -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- 10.1.1.0/24 !10.1.1.0/24 MASQUERADE all -- !10.1.1.0/24 10.1.1.0/24 Chain OUTPUT (policy ACCEPT) target prot opt source destination And here's the Ubuntu box: # ifconfig eth0 Link encap:Ethernet HWaddr 00:1e:67:15:2b:f1 inet addr:192.168.1.12 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:67ff:fe15:2bf1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:28785139 errors:0 dropped:0 overruns:0 frame:0 TX packets:19050735 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:32068182803 (32.0 GB) TX bytes:6061333280 (6.0 GB) Interrupt:16 Memory:b1a00000-b1a20000 eth1 Link encap:Ethernet HWaddr 00:1e:67:15:2b:f0 inet addr:10.1.1.12 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:67ff:fe15:2bf0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:285086 errors:0 dropped:0 overruns:0 frame:0 TX packets:12719 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:30817249 (30.8 MB) TX bytes:2153228 (2.1 MB) Interrupt:16 Memory:b1900000-b1920000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:86048 errors:0 dropped:0 overruns:0 frame:0 TX packets:86048 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:11426538 (11.4 MB) TX bytes:11426538 (11.4 MB) # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 0.0.0.0 10.1.1.1 0.0.0.0 UG 100 0 0 eth1 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 10.8.0.0 192.168.1.10 255.255.255.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 # arp -n # Note: Here I have changed all the different MACs except the ones corresponding to the Debian box (on 10.1.1.1 and 192.168.1.10) Address HWtype HWaddress Flags Mask Iface 192.168.1.70 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.90 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.97 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.103 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.13 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.120 (incomplete) eth0 192.168.1.111 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.118 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.51 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.102 (incomplete) eth0 192.168.1.64 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.52 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.74 (incomplete) eth0 192.168.1.94 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.121 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.72 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.87 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.91 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.71 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.78 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.83 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.88 (incomplete) eth0 192.168.1.82 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.98 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.100 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.93 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.73 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.11 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.85 (incomplete) eth0 192.168.1.112 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.89 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.65 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.81 ether NN:NN:NN:NN:NN:NN C eth0 10.1.1.1 ether 94:0c:6d:82:0d:98 C eth1 192.168.1.53 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.116 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.61 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.10 ether 6c:f0:49:a4:47:38 C eth0 192.168.1.86 (incomplete) eth0 192.168.1.119 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.66 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.1 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.1 ether NN:NN:NN:NN:NN:NN C eth1 192.168.1.92 ether NN:NN:NN:NN:NN:NN C eth0 # iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination # iptables -L -n -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination Edit: Following Patrick's suggestion, I did a tcpdump con the Ubuntu box and I see this: # tcpdump -i eth1 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 1, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 1, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 2, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 2, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 3, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 3, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 4, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 4, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 5, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 5, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 6, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 6, length 64 ^C 12 packets captured 12 packets received by filter 0 packets dropped by kernel So the question is: if all packets seem to be coming and going, why does ping report 100% packet loss?

  Read the article

• How to Sync Any Browser’s Bookmarks With Your iPad or iPhone

  - by Chris Hoffman

  Apple makes it easy to synchronize bookmarks between the Safari browser on a Mac and the Safari browser on iOS, but you don’t have to use Safari — or a Mac — to sync your bookmarks back and forth. You can do this with any browser. Whether you’re using Chrome, Firefox, or even Internet Explorer, there’s a way to sync your browser bookmarks so you can access your same bookmarks on your iPad. Safari on a Mac Apple’s iCloud service is the officially supported way to sync data with your iPad or iPhone. It’s included on Macs, but Apple also offers similar iCloud bookmark syncing features for Windows. On a Mac, this should be enabled by default. To check whether it’s enabled, you can launch the System Preferences panel on your Mac, open the iCloud preferences panel, and ensure the Safari option is checked. If you’re using Safari on Windows — well, you shouldn’t be. Apple is no longer updating Safari for Windows. iCloud allows you to synchronize bookmarks between other browsers on your Windows system and Safari on your iOS device, so Safari isn’t necessary. Internet Explorer, Firefox, or Chrome via iCloud To get started, download Apple’s iCloud Control Panel application for Windows and install it. Launch the iCloud Control Panel and log in with the same iCloud account (Apple ID) you use on your iPad or iPhone. You’ll be able to enable Bookmark syncing with Internet Explorer, Firefox, or Chrome. Click the Options button to select the browser you want to synchronize bookmarks with. (Note that bookmarks are called “favorites” in Internet Explorer.) You’ll be able to access your synced bookmarks in the Safari browser on your iPad or iPhone, and they’ll sync back and forth automatically over the Internet. Google Chrome Sync Google Chrome also has its own built-in sync feature and Google provides an official Chrome app for iPad and iPhone. If you’re a Chrome user, you can set up Chrome Sync on your desktop version of Chrome — you should already have this enabled if you have logged into your Chrome browser. You can check if this Chrome Sync is enabled by opening Chrome’s settings screen and seeing whether you’re signed in. Click the Advanced sync settings button and ensure bookmark syncing is enabled. Once you have Chrome Sync set up, you can install the Chrome app from the App Store and sign in with the same Google account. Your bookmarks, as well as other data like your open browser tabs, will automatically sync. This can be a better solution because the Chrome browser is available for so many platforms and you gain the ability to synchronize other browser data, such as your open browser tabs, between your devices. Unfortunately, the Chrome browser is slower than Apple’s own Safari browser on iPad and iPhone because of the way Apple limits third-party browsers, so using it involves a trade-off. Manual Bookmark Sync in iTunes iTunes also allows you to sync bookmarks between your computer and your iPad or iPhone. It does this the old-fashioned way, by initiating a manual sync when your device is plugged in via USB. To access this option, connect your device to your computer, select the device in iTunes, and click the Info tab. This is the more outdated way of synchronizing your bookmarks. This feature may be useful if you want to create a one-time copy of your bookmarks from your PC, but it’s nowhere near ideal for regular syncing. You don’t have to use this feature, just as you really don’t have to use iTunes anymore. In fact, this option is unavailable if you’ve set up iCloud syncing in iTunes. After you set up bookmark syncing via iCloud or Chrome Sync, bookmarks will sync immediately after you save, remove, or edit them.     

  Read the article

• Integrating Windows Form Click Once Application into SharePoint 2007 &ndash; Part 1 of 2

  - by Kelly Jones

  Last year, I had the opportunity to build a solution that involved integrating a Windows Form application into a SharePoint 2007 (WSS version 3.0). In this post, I’ll layout our architecture thinking and in part two, I’ll describe the technical details. Business Case Our challenge was this: we needed an easy way for a small group of our users to upload documents, in batches.  They also needed to quickly set the meta data values, as well as set security on individual files. Using the out of the box uploads just didn’t fit.  The single file upload allows set the meta data, but our users would be uploading dozens of files.  The multiple upload would allow our users to upload batches of files, but it doesn’t allow them to set the meta data during upload.  Also, neither upload method allows the users to set the permissions on the file. Our Solution We looked into building a web control of some kind, but ruled that out due to security complexities (if I remember correctly).  Another option would have been using a technology like Silverlight (or Flash?), but our team didn’t have the skills necessary to build with these. So, after looking at what was technically possible, and also what skills our team had, we settled on a Windows Form application.  We also decided to deliver it to the clients via Click Once, so we would have the ability to easily update the application in the future. Lessons Learned After deploying our solution, we’ve learned a few lessons.  First, you’ll need to have the .Net Framework installed on the client computers.  We knew this, but we still ran into issues making sure our users had the proper framework version installed.  Second, we had issues with authentication.  Our issues were due to our testing domain being a separate Active Directory domain from the domain that our end users and their workstations were members of.  (See my earlier post about Clearing Saved Passwords for the fix to our problem). Our third issue was how we dealt with uploading files that were named the same.  Our application would replace the existing file with the new file, which is the way we expected it to work.  However, our users wanted to upload weekly reports, named the same as the previous week.  We solved this by using folders within the document library to keep the sets of reports separate from previous weeks. One last thing to consider before implementing a solution like this, is what browsers and platforms your users will be working from.  We only needed to support IE and Windows, which works fine.  However, if you need to support Firefox, there are add-ons that allow Click Once to work with Firefox.  This is still a Windows only solution though.  In order to support Macs, you’d have to focus on either browser techniques (AJAX?) or Silverlight/Flash. Summary Our users are happy with the Click Once app.  It allowed them to move all of their content to our SharePoint site in under a couple hours, which they were thrilled with.  We’re happy because we can easily deploy updates, our development time was small, and we met all of our business requirements.

  Read the article

• Healthcare and Distributed Data Don't Mix

  - by [email protected]

  How many times have you heard the story?  Hard disk goes missing, USB thumb drive goes missing, laptop goes missing...Not a week goes by that we don't hear about our data going missing...  Healthcare data is a big one, but we hear about credit card data, pricing info, corporate intellectual property...  When I have spoken at Security and IT conferences part of my message is "Why do you give your users data to lose in the first place?"  I don't suggest they can't have access to it...in fact I work for the company that provides the premiere data security and desktop solutions that DO provide access.  Access isn't the issue.  'Keeping the data' is the issue.We are all human - we all make mistakes... I fault no one for having their car stolen or that they dropped a USB thumb drive. (well, except the thieves - I can certainly find some fault there)  Where I find fault is in policy (or lack thereof sometimes) that allows users to carry around private, and important, data with them.  Mr. Director of IT - It is your fault, not theirs.  Ms. CSO - Look in the mirror.It isn't like one can't find a network to access the data from.  You are on a network right now.  How many Wireless ones (wifi, mifi, cellular...) are there around you, right now?  Allowing employees to remove data from the confines of (wait for it... ) THE DATA CENTER is just plain indefensible when it isn't required.  The argument that the laptop had a password and the hard disk was encrypted is ridiculous.  An encrypted drive tells thieves that before they sell the stolen unit for $75, they should crack the encryption and ascertain what the REAL value of the laptop is... credit card info, Identity info, pricing lists, banking transactions... a veritable treasure trove of info people give away on an 'encrypted disk'.What started this latest rant on lack of data control was an article in Government Health IT that was forwarded to me by Denny Olson, an Oracle Principal Sales Consultant in Minnesota.  The full article is here, but the point was that a couple laptops went missing in a couple different cases, and.. well... no one knows where the data is, and yes - they were loaded with patient info.  What were you thinking?Obviously you can't steal data form a Sun Ray appliance... since it has no data, nor any storage to keep the data on, and Secure Global Desktop allows access from Macs, Linux and Windows client devices...  but in all cases, there is no keeping the data unless you explicitly allow for it in your policy.   Since you can get at the data securely from any network, why would you want to take personal responsibility for it?  Both Sun Rays and Secure Global Desktop are widely used in Healthcare... but clearly not widely enough.We need to do a better job of getting the message out -  Healthcare (or insert your business type here) and distributed data don't mix. Then add Hot Desking and 'follow me printing' and you have something that Clinicians (and CSOs) love.Thanks for putting up my blood pressure, Denny.

  Read the article

• ArchBeat Link-o-Rama Top 10 for October 28 - November 3, 2012

  - by Bob Rhubart

  The Top 10 most popular items shared on the OTN ArchBeat Facebook Page for the week of Oct 28 - Nov 3, 2012. Eventually, 90% of tech budgets will be outside IT departments | ZDNet Another interesting post from ZDNet blogger Joe McKendrick about changing roles in IT. ADF Mobile - Login Functionality | Andrejus Baranovskis "The new ADF Mobile approach with native deployment is cool when you want to access phone functionality (camera, email, sms and etc.), also when you want to build mobile applications with advanced UI," reports Oracle ACE Director Andrejus Baranovskis. Mobile Development Platform Strategy Chart: ADF Mobile, WebCenter Sites, Portal, Content and Social "Unlike desktop web focused efforts, the world of mobile has undergone change at a feverish pace," says social enterprise expert John Brunswick. His extensive post charts various resources that will help you keep up. ADF Essentials - The Bare Necessities | Floyd Teter The experiment is over… And now Oracle ACE Director Floyd Teter shares his impressions after spending some time with Oracle ADF Essentials, the free version of Oracle ADF. A review of Oracle SOA Suite 11g Administrator’s Handbook | RedStack "More so than any other single piece of content that I have seen on the topic, it provides the information that a SOA administrator needs to know in order to successfully configure, manage, monitor, troubleshoot and backup an Oracle SOA environment." So says Oracle Fusion Middleware A-Team solution architect Mark Nelson of Oracle SOA Suite 11g Administrator’s Handbook, by Ahmed Aboulnaga and Arun Pareek. Expanding the Oracle Enterprise Repository with functional documentation Capgemini middleware specialist Marc Kuijpers shares information on how Oracle Enterprise Repository can be configured "to contain functional assets, i.e. functional designs, use cases and a logical data model" to aid in SOA governance efforts. Podcast: Are You Future Proof? - Part 2 In Part 2, practicing architects and Oracle ACE Directors Ron Batra (AT&T), Basheer Khan (Innowave Technology), and Ronald van Luttikhuizen discuss re-tooling one’s skill set to reflect changes in enterprise IT, including the knowledge to steer stakeholders around the hype to what’s truly valuable. Easy way to access JPA with REST (JSON / XML) | Edwin Biemond Oracle ACE Edwin Biemond shows you "what is possible with JPA-RS, how easy it is and howto setup your own EclipseLink REST service." Clustering ODI11g for High-Availability Part 1: Introduction and Architecture | Richard Yeardley "JEE agents can be deployed alongside, or instead of, standalone agents," says Rittman Meade's Richard Yeardley. "But there is one key advantage in using JEE agents and WebLogic: when you deploy JEE agents as part of a WebLogic cluster they can be configured together to form a high availability cluster." Learn more in Yeardley's extensive post. 2012 IOUG Virtualization SIG – Online Symposium on Nov 7 and Nov 8 | Kai Yu Oracle ACE Director Kai Yu shares information on this week's IOUG Virtualization SIG online event. Does that make it a virtual virtualization event? Thought for the Day "If McDonalds were run like a software company, one out of every hundred Big Macs would give you food poisoning — and the response would be, 'We’re sorry, here’s a coupon for two more.'" — Mark Minasi Source: SoftwareQuotes.com

  Read the article

• Sunshine after the iCloud release?

  - by Laila

  "Why should I believe them? They're the ones that brought us MobileMe? It was not our finest hour, but we learned a lot." Steve Jobs June 6th 2011 Apple's new cloud service has been met with uncritical excitement by industry commentators.  It is wonderful what a rename can do.  Apple has had a 'cloud' offering for three years called MobileMe, successor to .MAC and  iTools, so iCloud is now the fourth internet service Apple have attempted. If this had been Microsoft, there would have been catcalls all around the blogosphere.  I'll admit that there is a lot more functionality announced for iCloud than MobileMe has ever managed to achieve, but then almost anything has more functionality than MobileMe.  It's an expensive service (£120 a year in the UK, $90 in the states), launched as far back as  June 9, 2008, that has delivered very little and suffered a string of technical problems; the documentation was mainly  a community effort, built up gradually by the frustrated and angry users. It was supposed to synchronise PC Outlook calendars but couldn't manage Microsoft Exchange (Google could, of course). It used WebDAV to allow Windows users to attach to the filestore, but didn't document how to do it. The method for downloading and uploading files to the cloud-based filestore was ridiculously clunky. It allowed you to post photos on a public site, but forgot to include a way of deleting photos. I could go on with the list, but you can explore the many sites that have flourished to inhabit the support-vacuum left by Apple. MobileMe should have had all the bright new clever things announced for iCloud. Apple dropped the ball, and allowed services such as Flickr to fill the void. However, their PR skills are such that, a name-change later (the .ME.com email address remains), it has turned a rout into a victory, and hundreds of earnest bloggers have been extolling Apple's expertise in cloud matters. This must be frustrating for the other cloud providers who have quietly got the technology working right. I wish iCloud well, even though I resent the expensive mess they made of MobileMe. Apple promise that iCloud will sync files, apps, app data, and media across all the different iOS5 devices, Macs, and PCs. It also hopes to sync music across devices, but not video content. They've offered existing MobileMe users free use of the MobileMe service for a year as the product is morphed, and they will be able to transfer to iCloud when it is launched in the autumn.  On June 30, 2012, MobileMe will die, and Apple's iWeb is also soon to join iTools and .MAC in the hereafter. So why get excited about iCloud? That all depends on the level of PC integration. Whereas iOS5 machines will be full participants in the new world of data-sharing (Sorry iPod Touch users) what about .NET libraries? There is talk of synchronising 'My Pictures' libraries with iOS5 and iMac machines, but little more detail as yet. Apple has a lot to prove with iCloud and anyone with actual experience of their past attempts to get into cloud services will be wary.

  Read the article

< Previous Page | 9 10 11 12 13 14 15  | Next Page >