Search Results

Search found 995 results on 40 pages for 'suresh sd'.

Page 13/40 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

• Why is my external USB hard drive sometimes completely inaccessible?

  - by Eliah Kagan

  I have an external USB hard drive, consisting of an 1 TB SATA drive in a Rosewill RX35-AT-SU SLV Aluminum 3.5" Silver USB 2.0 External Enclosure, plugged into my SONY VAIO VGN-NS310F laptop. It is plugged directly into the computer (not through a hub). The drive inside the enclosure is a 7200 rpm Western Digital, but I don't remember the exact model. I can remove the drive from the enclosure (again), if people think it's necessary to know that detail. The drive is formatted ext4. I mount it dynamically with udisks on my Lubuntu 11.10 system, usually automatically via PCManFM. (I have had Lubuntu 12.04 on this machine, and experienced all this same behavior with that too.) Every once in a while--once or twice a day--it becomes inaccessible, and difficult to unmount. Attempting to unmount it with sudo umount ... gives an error message saying the drive is in use and suggesting fuser and lsof to find out what is using it. Killing processes found to be using the drive with fuser and lsof is sometimes sufficient to let me unmount it, but usually isn't. Once the drive is unmounted or the machine is rebooted, the drive will not mount. Plugging in the drive and turning it on registers nothing on the computer. dmesg is unchanged. The drive's access light usually blinks vigorously, as though the drive is being accessed constantly. Then eventually, after I keep the drive off for a while (half an hour), I am able to mount it again. While the drive doesn't work on this machine for a while, it will work immediately on another machine running the same version of Ubuntu. Sometimes bringing it back over from the other machine seems to "fix" it. Sometimes it doesn't. The drive doesn't always stop being accessible while mounted, before becoming unmountable. Sometimes it works fine, I turn off the computer, I turn the computer back on, and I cannot mount the drive. Currently this is the only drive with which I have this problem, but I've had problems that I think are the same as this, with different drives, on different Ubuntu machines. This laptop has another external USB drive plugged into it regularly, which doesn't have this problem. Unplugging that drive before plugging in the "problem" drive doesn't fix the problem. I've opened the drive up and made sure the connections were tight in the past, and that didn't seem to help (any more than waiting the same amount of time that it took to open and close the drive, before attempting to remount it). Does anyone have any ideas about what could be causing this, what troubleshooting steps I should perform, and/or how I could fix this problem altogether? Update: I tried replacing the USB data cable (from the enclosure to the laptop), as Merlin suggested. I should've tried that long ago, since it fits the symptoms perfectly (the drive works on another machine, which would make sense because the cable would be bent at a different angle, possibly completing a circuit of frayed wires). Unfortunately, though, this did not help--I have the same problem with the new cable. I'll try to provide additional detailed information about the drive inside the enclosure, next time I'm able to get the drive working. (At the moment I don't have another machine available to attach it.) Major Update (28 June 2012) The drive seems to have deteriorated considerably. I think this is so, because I've attached it to another machine and gotten lots of errors about invalid characters, when copying files from it. I am less interested in recovering data from the drive than I am in figuring out what is wrong with it. I specifically want to figure out if the problem is the drive or the enclosure. Now, when I plug the drive into the original machine where I was having the problems, it still doesn't appear (including with sudo fdisk -l), but it is recognized by the kernel and messages are added to dmesg. Most of the message consist of errors like this, repeated many times: [ 7.707593] sd 5:0:0:0: [sdc] Unhandled sense code [ 7.707599] sd 5:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE [ 7.707606] sd 5:0:0:0: [sdc] Sense Key : Medium Error [current] [ 7.707614] sd 5:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 7.707621] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 7.707636] end_request: critical target error, dev sdc, sector 0 [ 7.707641] Buffer I/O error on device sdc, logical block 0 Here are all the lines from dmesg starting with when the drive is recognized. Please note that: I'm back to running Lubuntu 12.04 on this machine (and perhaps that's a factor in better error messages). Now that the drive has been plugged into another machine and back into this one, and also now that this machine is back to running 12.04, the drive's access light doesn't blink as I had described. Looking at the drive, it would appear as though it is working normally, with low or no access. This behavior (the errors) occurs when rebooting the machine with the drive plugged in, and also when manually plugging in the drive. A few of the messages are about /dev/sdb. That drive is working fine. The bad drive is /dev/sdc. I just didn't want to edit anything out from the middle.

  Read the article

• How to know if the client has terminated in sockets

  - by shadyabhi

  Suppose, I have a connected socket after writing this code.. if ((sd = accept(socket_d, (struct sockaddr *)&client_addr, &alen)) < 0) { perror("accept failed\n"); exit(1); } How can I know at the server side that client has exited. My whole program actually does the following.. Accepts a connection from client Starts a new thread that reads messages from that particular client and then broadcast this message to all the connected clients. If you want to see the whole code... In this whole code. I am also struggling with one more problem that whenever I kill a client with Ctrl+C, my server terminates abruptly.. It would be nice if anyone could suggest what the problem is.. #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #include <arpa/inet.h> #include <netdb.h> #include <stdio.h> #include <unistd.h> #include <stdlib.h> #include <string.h> #include <signal.h> #include <errno.h> #include <pthread.h> /*CONSTANTS*/ #define DEFAULT_PORT 10000 #define LISTEN_QUEUE_LIMIT 6 #define TOTAL_CLIENTS 10 #define CHAR_BUFFER 256 /*GLOBAL VARIABLE*/ int current_client = 0; int connected_clients[TOTAL_CLIENTS]; extern int errno; void *client_handler(void * socket_d); int main(int argc, char *argv[]) { struct sockaddr_in server_addr;/* structure to hold server's address*/ int socket_d; /* listening socket descriptor */ int port; /* protocol port number */ int option_value; /* needed for setsockopt */ pthread_t tid[TOTAL_CLIENTS]; port = (argc > 1)?atoi(argv[1]):DEFAULT_PORT; /* Socket Server address structure */ memset((char *)&server_addr, 0, sizeof(server_addr)); server_addr.sin_family = AF_INET; /* set family to Internet */ server_addr.sin_addr.s_addr = INADDR_ANY; /* set the local IP address */ server_addr.sin_port = htons((u_short)port); /* Set port */ /* Create socket */ if ( (socket_d = socket(PF_INET, SOCK_STREAM, 0)) < 0) { fprintf(stderr, "socket creation failed\n"); exit(1); } /* Make listening socket's port reusable */ if (setsockopt(socket_d, SOL_SOCKET, SO_REUSEADDR, (char *)&option_value, sizeof(option_value)) < 0) { fprintf(stderr, "setsockopt failure\n"); exit(1); } /* Bind a local address to the socket */ if (bind(socket_d, (struct sockaddr *)&server_addr, sizeof(server_addr)) < 0) { fprintf(stderr, "bind failed\n"); exit(1); } /* Specify size of request queue */ if (listen(socket_d, LISTEN_QUEUE_LIMIT) < 0) { fprintf(stderr, "listen failed\n"); exit(1); } memset(connected_clients,0,sizeof(int)*TOTAL_CLIENTS); for (;;) { struct sockaddr_in client_addr; /* structure to hold client's address*/ int alen = sizeof(client_addr); /* length of address */ int sd; /* connected socket descriptor */ if ((sd = accept(socket_d, (struct sockaddr *)&client_addr, &alen)) < 0) { perror("accept failed\n"); exit(1); } else printf("\n I got a connection from (%s , %d)\n",inet_ntoa(client_addr.sin_addr),ntohs(client_addr.sin_port)); if (pthread_create(&tid[current_client],NULL,(void *)client_handler,(void *)sd) != 0) { perror("pthread_create error"); continue; } connected_clients[current_client]=sd; current_client++; /*Incrementing Client number*/ } return 0; } void *client_handler(void *connected_socket) { int sd; sd = (int)connected_socket; for ( ; ; ) { ssize_t n; char buffer[CHAR_BUFFER]; for ( ; ; ) { if (n = read(sd, buffer, sizeof(char)*CHAR_BUFFER) == -1) { perror("Error reading from client"); pthread_exit(1); } int i=0; for (i=0;i<current_client;i++) { if (write(connected_clients[i],buffer,sizeof(char)*CHAR_BUFFER) == -1) perror("Error sending messages to a client while multicasting"); } } } } My client side is this (Maye be irrelevant while answering my question) #include <stdio.h> #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #include <netdb.h> #include <string.h> #include <stdlib.h> void error(char *msg) { perror(msg); exit(0); } void *listen_for_message(void * fd) { int sockfd = (int)fd; int n; char buffer[256]; bzero(buffer,256); printf("YOUR MESSAGE: "); fflush(stdout); while (1) { n = read(sockfd,buffer,256); if (n < 0) error("ERROR reading from socket"); if (n == 0) pthread_exit(1); printf("\nMESSAGE BROADCAST: %sYOUR MESSAGE: ",buffer); fflush(stdout); } } int main(int argc, char *argv[]) { int sockfd, portno, n; struct sockaddr_in serv_addr; struct hostent *server; pthread_t read_message; char buffer[256]; if (argc < 3) { fprintf(stderr,"usage %s hostname port\n", argv[0]); exit(0); } portno = atoi(argv[2]); sockfd = socket(AF_INET, SOCK_STREAM, 0); if (sockfd < 0) error("ERROR opening socket"); server = gethostbyname(argv[1]); if (server == NULL) { fprintf(stderr,"ERROR, no such host\n"); exit(0); } bzero((char *) &serv_addr, sizeof(serv_addr)); serv_addr.sin_family = AF_INET; bcopy((char *)server->h_addr, (char *)&serv_addr.sin_addr.s_addr, server->h_length); serv_addr.sin_port = htons(portno); if (connect(sockfd,&serv_addr,sizeof(serv_addr)) < 0) error("ERROR connecting"); bzero(buffer,256); if (pthread_create(&read_message,NULL,(void *)listen_for_message,(void *)sockfd) !=0 ) { perror("error creating thread"); } while (1) { fgets(buffer,255,stdin); n = write(sockfd,buffer,256); if (n < 0) error("ERROR writing to socket"); bzero(buffer,256); } return 0; }

  Read the article

• e2fsck extremely slow, although enough memory exists

  - by kaefert

  I've got this external USB-Disk: kaefert@blechmobil:~$ lsusb -s 2:3 Bus 002 Device 003: ID 0bc2:3320 Seagate RSS LLC As can be seen in this dmesg output, there is some problem that prevents that disk from beeing mounted: kaefert@blechmobil:~$ dmesg ... [ 113.084079] usb 2-1: new high-speed USB device number 3 using ehci_hcd [ 113.217783] usb 2-1: New USB device found, idVendor=0bc2, idProduct=3320 [ 113.217787] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 113.217790] usb 2-1: Product: Expansion Desk [ 113.217792] usb 2-1: Manufacturer: Seagate [ 113.217794] usb 2-1: SerialNumber: NA4J4N6K [ 113.435404] usbcore: registered new interface driver uas [ 113.455315] Initializing USB Mass Storage driver... [ 113.468051] scsi5 : usb-storage 2-1:1.0 [ 113.468180] usbcore: registered new interface driver usb-storage [ 113.468182] USB Mass Storage support registered. [ 114.473105] scsi 5:0:0:0: Direct-Access Seagate Expansion Desk 070B PQ: 0 ANSI: 6 [ 114.474342] sd 5:0:0:0: [sdb] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 114.475089] sd 5:0:0:0: [sdb] Write Protect is off [ 114.475092] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 114.475959] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 114.477093] sd 5:0:0:0: [sdb] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 114.501649] sdb: sdb1 [ 114.502717] sd 5:0:0:0: [sdb] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 114.504354] sd 5:0:0:0: [sdb] Attached SCSI disk [ 116.804408] EXT4-fs (sdb1): ext4_check_descriptors: Checksum for group 3976 failed (47397!=61519) [ 116.804413] EXT4-fs (sdb1): group descriptors corrupted! ... So I went and fired up my favorite partition manager - gparted, and told it to verify and repair the partition sdb1. This made gparted call e2fsck (version 1.42.4 (12-Jun-2012)) e2fsck -f -y -v /dev/sdb1 Although gparted called e2fsck with the "-v" option, sadly it doesn't show me the output of my e2fsck process (bugreport https://bugzilla.gnome.org/show_bug.cgi?id=467925 ) I started this whole thing on Sunday (2012-11-04_2200) evening, so about 48 hours ago, this is what htop says about it now (2012-11-06-1900): PID USER PRI NI VIRT RES SHR S CPU% MEM% TIME+ Command 3704 root 39 19 1560M 1166M 768 R 98.0 19.5 42h56:43 e2fsck -f -y -v /dev/sdb1 Now I found a few posts on the internet that discuss e2fsck running slow, for example: http://gparted-forum.surf4.info/viewtopic.php?id=13613 where they write that its a good idea to see if the disk is just that slow because maybe its damaged, and I think these outputs tell me that this is not the case in my case: kaefert@blechmobil:~$ sudo hdparm -tT /dev/sdb /dev/sdb: Timing cached reads: 3562 MB in 2.00 seconds = 1783.29 MB/sec Timing buffered disk reads: 82 MB in 3.01 seconds = 27.26 MB/sec kaefert@blechmobil:~$ sudo hdparm /dev/sdb /dev/sdb: multcount = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 364801/255/63, sectors = 5860533160, start = 0 However, although I can read quickly from that disk, this disk speed doesn't seem to be used by e2fsck, considering tools like gkrellm or iotop or this: kaefert@blechmobil:~$ iostat -x Linux 3.2.0-2-amd64 (blechmobil) 2012-11-06 _x86_64_ (2 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 14,24 47,81 14,63 0,95 0,00 22,37 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util sda 0,59 8,29 2,42 5,14 43,17 160,17 53,75 0,30 39,80 8,72 54,42 3,95 2,99 sdb 137,54 5,48 9,23 0,20 587,07 22,73 129,35 0,07 7,70 7,51 16,18 2,17 2,04 Now I researched a little bit on how to find out what e2fsck is doing with all that processor time, and I found the tool strace, which gives me this: kaefert@blechmobil:~$ sudo strace -p3704 lseek(4, 41026998272, SEEK_SET) = 41026998272 write(4, "\212\354K[_\361\3nl\212\245\352\255jR\303\354\312Yv\334p\253r\217\265\3567\325\257\3766"..., 4096) = 4096 lseek(4, 48404766720, SEEK_SET) = 48404766720 read(4, "\7t\260\366\346\337\304\210\33\267j\35\377'\31f\372\252\ffU\317.y\211\360\36\240c\30`\34"..., 4096) = 4096 lseek(4, 41027002368, SEEK_SET) = 41027002368 write(4, "\232]7Ws\321\352\t\1@[+5\263\334\276{\343zZx\352\21\316`1\271[\202\350R`"..., 4096) = 4096 lseek(4, 48404770816, SEEK_SET) = 48404770816 read(4, "\17\362r\230\327\25\346//\210H\v\311\3237\323K\304\306\361a\223\311\324\272?\213\tq \370\24"..., 4096) = 4096 lseek(4, 41027006464, SEEK_SET) = 41027006464 write(4, "\367yy>x\216?=\324Z\305\351\376&\25\244\210\271\22\306}\276\237\370(\214\205G\262\360\257#"..., 4096) = 4096 lseek(4, 48404774912, SEEK_SET) = 48404774912 read(4, "\365\25\0\21|T\0\21}3t_\272\373\222k\r\177\303\1\201\261\221$\261B\232\3142\21U\316"..., 4096) = 4096 ^CProcess 3704 detached around 16 of these lines every second, so 4 read and 4 write operations every second, which I don't consider to be a lot.. And finally, my question: Will this process ever finish? If those numbers from fseek (48404774912) represent bytes, that would be something like 45 gigabytes, with this beeing a 3 terrabyte disk, which would give me 134 days to go, if the speed stays constant, and e2fsck scans the disk like this completly and only once. Do you have some advice for me? I have most of the data on that disk elsewhere, but I've put a lot of hours into sorting and merging it to this disk, so I would prefer to getting this disk up and running again, without formatting it anew. I don't think that the hardware is damaged since the disk is only a few months and since I can't see any I/O errors in the dmesg output. UPDATE: I just looked at the strace output again (2012-11-06_2300), now it looks like this: lseek(4, 1419860611072, SEEK_SET) = 1419860611072 read(4, "3#\f\2447\335\0\22A\355\374\276j\204'\207|\217V|\23\245[\7VP\251\242\276\207\317:"..., 4096) = 4096 lseek(4, 43018145792, SEEK_SET) = 43018145792 write(4, "]\206\231\342Y\204-2I\362\242\344\6R\205\361\324\177\265\317C\334V\324\260\334\275t=\10F."..., 4096) = 4096 lseek(4, 1419860615168, SEEK_SET) = 1419860615168 read(4, "\262\305\314Y\367\37x\326\245\226\226\320N\333$s\34\204\311\222\7\315\236\336\300TK\337\264\236\211n"..., 4096) = 4096 lseek(4, 43018149888, SEEK_SET) = 43018149888 write(4, "\271\224m\311\224\25!I\376\16;\377\0\223H\25Yd\201Y\342\r\203\271\24eG<\202{\373V"..., 4096) = 4096 lseek(4, 1419860619264, SEEK_SET) = 1419860619264 read(4, ";d\360\177\n\346\253\210\222|\250\352T\335M\33\260\320\261\7g\222P\344H?t\240\20\2548\310"..., 4096) = 4096 lseek(4, 43018153984, SEEK_SET) = 43018153984 write(4, "\360\252j\317\310\251G\227\335{\214`\341\267\31Y\202\360\v\374\307oq\3063\217Z\223\313\36D\211"..., 4096) = 4096 So the numbers in the lseek lines before the reads, like 1419860619264 are already a lot bigger, standing for 1.29 terabytes if those numbers are bytes, so it doesn't seem to be a linear progress on a big scale, maybe there are only some areas that need work, that have big gaps in between them. UPDATE2: Okey, big disappointment, the numbers are back to very small again (2012-11-07_0720) lseek(4, 52174548992, SEEK_SET) = 52174548992 read(4, "\374\312\22\\\325\215\213\23\0357U\222\246\370v^f(\312|f\212\362\343\375\373\342\4\204mU6"..., 4096) = 4096 lseek(4, 46603526144, SEEK_SET) = 46603526144 write(4, "\370\261\223\227\23?\4\4\217\264\320_Am\246CQ\313^\203U\253\274\204\277\2564n\227\177\267\343"..., 4096) = 4096 so either e2fsck goes over the data multiple times, or it just hops back and forth multiple times. Or my assumption that those numbers are bytes is wrong. UPDATE3: Since it's mentioned here http://forums.fedoraforum.org/showthread.php?t=282125&page=2 that you can testisk while e2fsck is running, i tried that, though not with a lot of success. When asking testdisk to display the data of my partition, this is what I get: TestDisk 6.13, Data Recovery Utility, November 2011 Christophe GRENIER <[email protected]> http://www.cgsecurity.org 1 P Linux 0 4 5 45600 40 8 732566272 Can't open filesystem. Filesystem seems damaged. And this is what strace currently gives me (2012-11-07_1030) lseek(4, 212460343296, SEEK_SET) = 212460343296 read(4, "\315Mb\265v\377Gn \24\f\205EHh\2349~\330\273\203\3375\206\10\r3=W\210\372\352"..., 4096) = 4096 lseek(4, 47347830784, SEEK_SET) = 47347830784 write(4, "]\204\223\300I\357\4\26\33+\243\312G\230\250\371*m2U\t_\215\265J \252\342Pm\360D"..., 4096) = 4096 (times are in CET)

  Read the article

• Wireless not working - HP Probook 4540s

  - by Oguzhan

  I just installed Ubuntu 12.04 on 3 HP Probook 4540s's, and none of them seems to be able to connect to wireless networks. I have 1 Probook 4540s with Windows 7 installed and I can access wlan from it. I tried installing the necessary drivers from HP's website, but it still doesn't seem to be working. I've seen other people with different Probooks having similar problems, but their computers seem to be able to detect and even attempt to connect wlans, while mine doesn't even acknowledge that it has wireless. Any help would be appreciated. lspci: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.2 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 3 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Thames [Radeon 7500M/7600M Series] 03:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 30) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 30) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 30) 04:00.0 Network controller: Ralink corp. Device 3290 04:00.1 Bluetooth: Ralink corp. Device 3298 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07)

  Read the article

• Visual studio add-in

  - by Suresh Behera

  I was looking for a add in which could help to file the filename and found following few links for add-in All Visual Studio gallery http://www.visualstudiogallery.com Do you have any recommended add-ons/plug-in for Microsoft Visual Studio? http://stackoverflow.com/questions/2767/do-you-have-any-recommended-add-ons-plugins-for-microsoft-visual-studio Visual Studio Add-Ins Every Developer Should Download Now http://msdn.microsoft.com/en-us/magazine/cc300778.aspx Post here if you have any other extra...(read more)

  Read the article

• BizTalk Server Monitoring &ndash; SharePoint Web Part

  - by SURESH GIRIRAJAN

  I have been worked with customers using BizTalk as shared infrastructure in the enterprise, where we have two or more BizTalk apps running on it for different Business groups. Also these customers are not using BizTalk ESB portal even though they are using BizTalk ESB exception framework. So main issue with all these Business groups are they don’t have visibility into the BizTalk apps running in prod, even though they are using SCOM and other monitoring stuff in place. So I am trying to address few issues I am going to list below and how I try to mitigate them, first one on the list is how to get visibility into prod, how to provision those access to the BizTalk resources with minimal activity and how can we take advantage of the resources we have today. So I was working on creating REST data services for BizTalk RFID a year ago and available on codeplex. I thought to extend that idea to take advantage of BizTalk Data Services available in codeplex. I extended the BizTalk data services I will upload the updated service soon. So let me start thru how my solution works, so first step I am using the BizTalk data service (REST service) which expose most of the BizTalk artifacts as resources such as Applications, Orchestrations, Send ports, Receive ports, Host instances and In process instances etc. BizTalk Server Monitoring – SharePoint Web Part I am hosting the BizTalk data service in IIS with application pool configured to run under BizTalk administrator credentials. So with this setup I am making the service to make accessible anonymous. Next step of this solution I have created a SharePoint Visual web part which consumes the BizTalk data service and display all the BizTalk Application and Platform settings in read only mode. Even though BizTalk data services offers to browse resources as well perform actions like starting, stopping Orchestrations, Send ports, Receive locations, Host instances etc. Host Instances BizTalk Applications BizTalk Running / Suspended Instances So having this BizTalk Monitoring SharePoint web part, will be added to the SharePoint. This eliminates the need for granting access to the BizTalk users explicitly, so when you have BizTalk contractor or BizTalk application user need to have access to the BizTalk environment all the need is have access to the SharePoint website. You can configure the web part point to different end point based on your environment. I am making this as read only as part of this to make easier for the users and in terms of provisioning. This removes the dependency of BizTalk admin at least for viewing the BizTalk application status and errors etc. If we need to make any changes to the BizTalk application then its application owner responsibility to co-ordinate with BizTalk admins. There are options like BizTalk ESB portal, BizTalk 360 etc… but this one of the approach to reduce number of steps required to give access to BizTalk application users and also to maximize the resource we have in enterprise today. Also you can expose this data service thru Azure Service Bus and access from other apps like mobile devices or create a web site hosted in Azure etc. One last thing I have tested only with BizTalk Server 2010 on x64 VM only, but it should work on other version. I will try to upload the code shortly with instructions how to setup etc.… I welcome thoughts and suggestions… Hope this helps….

  Read the article

• Mapping between 4+1 architectural view model & UML

  - by Sadeq Dousti

  I'm a bit confused about how the 4+1 architectural view model maps to UML. Wikipedia gives the following mapping: Logical view: Class diagram, Communication diagram, Sequence diagram. Development view: Component diagram, Package diagram Process view: Activity diagram Physical view: Deployment diagram Scenarios: Use-case diagram The paper Role of UML Sequence Diagram Constructs in Object Lifecycle Concept gives the following mapping: Logical view (class diagram (CD), object diagram (OD), sequence diagram (SD), collaboration diagram (COD), state chart diagram (SCD), activity diagram (AD)) Development view (package diagram, component diagram), Process view (use case diagram, CD, OD, SD, COD, SCD, AD), Physical view (deployment diagram), and Use case view (use case diagram, OD, SD, COD, SCD, AD) which combines the four mentioned above. The web page UML 4+1 View Materials presents the following mapping: Finally, the white paper Applying 4+1 View Architecture with UML 2 gives yet another mapping: Logical view class diagrams, object diagrams, state charts, and composite structures Process view sequence diagrams, communication diagrams, activity diagrams, timing diagrams, interaction overview diagrams Development view component diagrams Physical view deployment diagram Use case view use case diagram, activity diagrams I'm sure further search will reveal other mappings as well. While various people usually have different perspectives, I don't see why this is the case here. Specially, each UML diagram describes the system from a particular aspect. So, for instance, why the "sequence diagram" is considered as describing the "logical view" of the system by one author, while another author considers it as describing the "process view"? Could you please help me clarify the confusion?

  Read the article

• System.Threading.ThreadAbortException executing WCF service

  - by SURESH GIRIRAJAN

  In one of our prod server we recently ran into issue when we went and update the web.config and try to browse the service. We started seeing the service was not responding and getting the following warning in the application log. Our service is WCF service, BizTalk orchestration exposed as service. We have other prod server where we never ran into this issue, so what’s different with this server. After going thru lot of forum and came up on some Microsoft service pack and hot fix which related to FCN. But I don’t want to apply any patch on this server then we need to do on all the other servers too. So solution is simple, I dropped the existing website, created a new site with different name with updated web.config browse the service. Then dropped that site and recreate the original web site and it worked fine without any issue. Event Viewer:  Event Type:        Warning Event Source:    ASP.NET 2.0.50727.0 Event Category:                Web Event Event ID:              1309 Date:                     6/6/2011 Time:                    5:41:42 PM User:                     N/A Computer:          PRODP02 Description: Event code: 3005 Event message: An unhandled exception has occurred. Event time: 6/6/2011 5:41:42 PM Event time (UTC): 6/6/2011 9:41:42 PM Event ID: a71769f42b304355a58c482bfec267f2 Event sequence: 3 Event occurrence: 1 Event detail code: 0  Application information:     Application domain: /LM/W3SVC/518296899/ROOT/PortArrivals-2-129518698821558995     Trust level: Full     Application Virtual Path: /TESTSVC     Application Path: D:\inetpub\wwwroot\RFID\TESTSVC\     Machine name: PRODP02  Process information:     Process ID: 8752     Process name: w3wp.exe     Account name: domain\BizTalk_Svc_Hostlso  Exception information:     Exception type: ThreadAbortException     Exception message: Thread was being aborted.  Request information:     Request URL: http://localhost:81/TESTSVC/TESTSVCS.svc     Request path: /TESTSVC/TESTSVCS.svc     User host address: 127.0.0.1     User:      Is authenticated: False     Authentication Type:      Thread account name: domain\BizTalk_Svc_Hostlso  Thread information:     Thread ID: 22     Thread account name: domain\BizTalk_Svc_Hostlso     Is impersonating: False     Stack trace:    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)    at System.Web.HttpApplication.ApplicationStepManager.ResumeSteps(Exception error)  at System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData)    at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)  <Description>Handling an exception.</Description> <AppDomain>/LM/W3SVC/518296899/ROOT/TESTSVC-6-129518741899334691</AppDomain> <Exception> <ExceptionType>System.Threading.ThreadAbortException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</ExceptionType> <Message>Thread was being aborted.</Message> <StackTrace> at System.Threading.Monitor.Enter(Object obj) at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath) at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.HandleRequest() at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.BeginRequest() at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.OnBeginRequest(Object state) at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.WorkItem.Invoke2() at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.WorkItem.Invoke() at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.ProcessCallbacks() at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.CompletionCallback(Object state) at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.ScheduledOverlapped.IOCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* nativeOverlapped) at System.ServiceModel.Diagnostics.Utility.IOCompletionThunk.UnhandledExceptionFrame(UInt32 error, UInt32 bytesRead, NativeOverlapped* nativeOverlapped) </StackTrace> <ExceptionString>System.Threading.ThreadAbortException: Thread was being aborted.    at System.Threading.Monitor.Enter(Object obj)    at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath)    at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath)    at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.HandleRequest()    at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.BeginRequest()    at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.OnBeginRequest(Object state)    at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.WorkItem.Invoke2()    at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.WorkItem.Invoke()    at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.ProcessCallbacks()    at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.CompletionCallback(Object state)    at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.ScheduledOverlapped.IOCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* nativeOverlapped)    at System.ServiceModel.Diagnostics.Utility.IOCompletionThunk.UnhandledExceptionFrame(UInt32 error, UInt32 bytesRead, NativeOverlapped* nativeOverlapped)</ExceptionString>

  Read the article

• Javascript : Modifying parent element from child block the web site to display

  - by Suresh Behera

  Well recently i was working with Dotnetnuke and we are using lots of JavaScript around this project. Internally, dotnetnuke use lot of asp.net user control which lead to have a situation where child element accessing/modifying data of parent. Here is one example   the DIV element is a child container element. The SCRIPT block inside the DIV element tries to modify the BODY element. The BODY element is the unclosed parent container of the DIV element. 1: < html > 2: < body >...(read more)

  Read the article

• Deselect first row on gridview onload

  - by Suresh Behera

  I had situation to deselect the first gridview row on load and came to know IsSynchronizedWithCurrentItem on Gridview should able to that but some how i missed on gridview. Mean while below one should work void gvMain_RowLoaded( object sender, RowLoadedEventArgs e) { try { GridViewRow row = e.Row as GridViewRow; if (row != null && !firstItemExpanded) { row.DetailsVisibility = Visibility.Collapsed; firstItemExpanded = false ; } } catch (Exception ex) { throw ex; } } .csharpcode, .csharpcode...(read more)

  Read the article

• Why Wifi no longer works 12.04.1

  - by Roger

  starting this morning over wifi (Realtek RTL8188CE) on CLEVO W253HU. May be due to the update before yesterday, more pilot managed, but somehow it worked yesterday. If someone has an idea of the problem. Back command lines: cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS" lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 006: ID 192f:0416 Avago Technologies, Pte. Bus 002 Device 004: ID 5986:0315 Acer, Inc lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) lspci -nn | grep -i net 02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) 03:00.0 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 05) lspci -k 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: i2c-i801 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) Subsystem: Realtek Semiconductor Co., Ltd. Device 9196 Kernel modules: rtl8192ce 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jme Kernel modules: jme 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: sdhci-pci 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jmb38x_ms Kernel modules: jmb38x_ms sudo lshw -C network *-network NON-RÉCLAMÉ description: Network controller produit: RTL8188CE 802.11b/g/n WiFi Adapter fabriquant: Realtek Semiconductor Co., Ltd. identifiant matériel: 0 information bus: pci@0000:02:00.0 version: 01 bits: 64 bits horloge: 33MHz fonctionnalités: pm msi pciexpress cap_list configuration: latency=0 ressources: portE/S:e000(taille=256) mémoire:f7d00000-f7d03fff *-network description: Ethernet interface produit: JMC250 PCI Express Gigabit Ethernet Controller fabriquant: JMicron Technology Corp. identifiant matériel: 0 information bus: pci@0000:03:00.0 nom logique: eth0 version: 05 numéro de série: 00:90:f5:c1:c6:45 taille: 100Mbit/s capacité: 1Gbit/s bits: 32 bits horloge: 33MHz fonctionnalités: pm pciexpress msix msi bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=jme driverversion=1.0.8 duplex=full ip=192.168.1.54 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s ressources: irq:44 mémoire:f7c20000-f7c23fff portE/S:d100(taille=128) portE/S:d000(taille=256) mémoire:f7c10000-f7c1ffff mémoire:f7c00000-f7c0ffff lsmod Module Size Used by btusb 18288 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 11 btusb,rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 binfmt_misc 17540 1 snd_hda_codec_realtek 224173 0 dm_crypt 23125 0 snd_hda_codec_hdmi 32474 0 uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev snd_hda_intel 33773 2 snd_hda_codec 127706 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi jmb38x_ms 17646 0 psmouse 87692 0 serio_raw 13211 0 memstick 16569 1 jmb38x_ms snd_seq_midi_event 14899 1 snd_seq_midi rtl8192ce 84826 0 rtl8192c_common 75767 1 rtl8192ce rtlwifi 111202 1 rtl8192ce snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq mac80211 506816 3 rtl8192ce,rtl8192c_common,rtlwifi mac_hid 13253 0 snd 78855 14 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 205544 2 rtlwifi,mac80211 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp usbhid 47199 0 hid 99559 1 usbhid i915 473035 3 drm_kms_helper 46978 1 i915 drm 242038 4 i915,drm_kms_helper jme 41259 0 i2c_algo_bit 13423 1 i915 sdhci_pci 18826 0 sdhci 33205 1 sdhci_pci wmi 19256 0 video 19596 1 i915 iwconfig lo no wireless extensions. eth0 no wireless extensions. ifconfig eth0 Link encap:Ethernet HWaddr 00:90:f5:c1:c6:45 inet adr:192.168.1.54 Bcast:192.168.1.255 Masque:255.255.255.0 adr inet6: fe80::290:f5ff:fec1:c645/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Packets reçus:4513 erreurs:0 :0 overruns:0 frame:0 TX packets:4359 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 Octets reçus:3471675 (3.4 MB) Octets transmis:712722 (712.7 KB) Interruption:44 lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 Packets reçus:686 erreurs:0 :0 overruns:0 frame:0 TX packets:686 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 Octets reçus:64556 (64.5 KB) Octets transmis:64556 (64.5 KB) sudo iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. uname -r -m 3.2.0-30-generic x86_64 cat /etc/network/interfaces auto lo iface lo inet loopback nm-tool NetworkManager Tool State: connected (global) - Device: eth0 [Connexion filaire 1] ------------------------------------------ Type: Wired Driver: jme State: connected Default: yes HW Address: 00:90:F5:C1:C6:45 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.54 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 sudo rfkill listrfkill list 1: hci0: Bluetooth Soft blocked: no Hard blocked: no The absence of line "Kernel driver in use:" the return of lspci-k made ??me think that it is not loaded yet but he seems to be. lsmod | grep rtl8192ce rtl8192ce 137478 0 rtlwifi 118749 1 rtl8192ce mac80211 506816 2 rtl8192ce,rtlwifi I found something disturbing in / var / log / syslog Sep 14 11:40:11 pcroger kernel: [ 64.048783] rtl8192ce-0:rtl92c_init_sw_vars():<0-0> Failed to request firmware! Sep 14 11:40:11 pcroger kernel: [ 64.048795] rtlwifi-0:rtl_pci_probe():<0-0> Can't init_sw_vars. Sep 14 11:40:11 pcroger kernel: [ 64.048835] rtl8192ce 0000:02:00.0: PCI INT A disabled Sep 14 11:40:11 pcroger kernel: [ 64.943345] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6 frozen Sep 14 11:40:11 pcroger kernel: [ 64.943358] ata1.00: failed command: READ FPDMA QUEUED Sep 14 11:40:11 pcroger kernel: [ 64.943371] ata1.00: cmd 60/00:00:00:68:6a/04:00:0b:00:00/40 tag 0 ncq 524288 in Sep 14 11:40:11 pcroger kernel: [ 64.943374] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Sep 14 11:40:11 pcroger kernel: [ 64.943381] ata1.00: status: { DRDY } Ubuntu and takes forever to start (2 min).

  Read the article

• "cannot open file system. File system seems damaged "

  - by suresh kadiri

  I was using windows 7 till yesterday. I tried to install ubuntu 14. 04 Lts version yesterday with in windows 7. But it was not succeeded. Then I decided to install ubuntu only. By mistake I installed ubuntu in whole disk. After that to get deleted partitions I installed testdisk. I also used deeper search option. Now I'm getting "file system damaged". It shows The hard disk (320GB /298 GiB) seems to small! (<473 GB /441 GB) Check the Harddisk size: HD Jumpers setings, BIOS detection... The following partitions can't be recovered: Partition start end size in sectrors Linux 19077 177 45 57604 81 13 618930716 Linux 19080 192 57 57607 96 25 618930716 With ubcd also I used testdisk option. Same result comes."cannot open file system. File system seems damaged ". I have all my stuff in hard disk. Please help me to get recover my files in deleted partitions.

  Read the article

• Atlanta Code Camp 2012

  - by SURESH GIRIRAJAN

  It was really exciting weekend at Atlanta code camp 2012. This was my first code camp, I presented on “Windows Kinect for Enterprise”. Walked through couple of demos, how we can integrate Kinect with WPF application. One of the demos I walked thorough how you can integrate Kinect with Microsoft Lync 2010 and other one on Car console app.   You can check the uploaded code here. I appreciate all the folks attended my session and thanks for all the organizers. Windows kinect for enterprise View more PowerPoint from sureshgiriraja

  Read the article

• Migrating BizTalk 2006 R2 to BizTalk 2010 XLANGs Issue

  - by SURESH GIRIRAJAN

  When we migrate some BizTalk apps from BizTalk 2006 R2 to BizTalk 2010, and we ran into issue when a .net component called inside the orchestration. In the .net component we are trying to retrieve some promoted property and we also checked in the BizTalk group hub to validate it was promoted, no issues there.  Only when we try to access the data into the .net component we had issue. We just moved all the assembly what we had in BizTalk 2006 R2 to BizTalk 2010, didn’t recompile anything in BizTalk 2010 environment. But looking further there is couple of new namespace added to the Microsoft.XLANGs… in BizTalk 2010 compared to BizTalk 2006 R2 caused the issue. So all we did to fix the issue is recompile the project in 2010 environment and it worked fine. So it looks like some backward compatibility issue.  public static void Load(XLANGMessage msg) {  try  {      // get the process id from context.       object ctxVal = msg.GetPropertyValue(typeof(ProcessID)); … } BizTalk 2010: Error Message in the event viewer:  The service instance will remain suspended until administratively resumed or terminated. If resumed the instance will continue from its last persisted state and may re-throw the same unexpected exception. InstanceId: 441d73d3-2e84-49d2-b6bd-7218065b5e1d Shape name: Bulk Load ShapeId: bb959e56-9221-48be-a80f-24051196617d Exception thrown from: segment 1, progress 65 Inner exception: A property cannot be associated with the type 'Tellago.Common.Schemas.ProcessId'.   Exception type: InvalidPropertyTypeException Source: Microsoft.XLANGs.Engine Target Site: Microsoft.XLANGs.RuntimeTypes.MessagePropertyDefinition _getMessagePropertyDefinition(System.Type) The following is a stack trace that identifies the location where the exception occured   at Microsoft.XLANGs.Core.XMessage._getMessagePropertyDefinition(Type propType) at Microsoft.XLANGs.Core.XMessage.GetContentProperty(Type propType) at Microsoft.XLANGs.Core.XMessage.GetPropertyValue(Type propType) at Microsoft.BizTalk.XLANGs.BTXEngine.BTXMessage.GetPropertyValue(Type propType) at Microsoft.XLANGs.Core.MessageWrapperForUserCode.GetPropertyValue(Type propType) at Tellago.Common.Components.Load(XLANGMessage msg) at Tellago.SuspensionProcess.segment1(StopConditions stopOn) at Microsoft.XLANGs.Core.SegmentScheduler.RunASegment(Segment s, StopConditions stopCond, Exception& exp)

  Read the article

• Unmount Mass Storage USB Device from the Command Line in Linux

  - by Casey

  I've searched high and low, and can't figure this one out. I have a older Olympus Camera (2001 or so). When I plug in the USB connection, I get the following log output: $ dmesg | grep sd [20047.625076] sd 21:0:0:0: Attached scsi generic sg7 type 0 [20047.627922] sd 21:0:0:0: [sdg] Attached SCSI removable disk Secondly, the drive is not mounted in the FS, but when I run gphoto2 I get the following error: $ gphoto2 --list-config *** Error *** An error occurred in the io-library ('Could not lock the device'): Camera is already in use. *** Error (-60: 'Could not lock the device') *** What command will unmount the drive. For example in Nautilus, I can right click and select "Safely Remove Device". After doing that, the /dev/sg7 and /dev/sdg devices are removed. Some things I've tried already are sdparm and sg3_utils, however I am unfamiliar with them, so it's possible I just didn't find the right command.

  Read the article

• Files and content search outside from opened Visual Studio solution

  - by Suresh Behera

  I have been using Visual studio for decade now and never notice a useful search option on “Find and Replace”  wizard.One of my client still use Windows XP for their development machine.We have set of projects separated to specific group or solutions. So,i always have challenge to find some contents or files other than current opened solutions.On windows 7 it is easier go folder and look for content but not so easy on windows XP.Following “Find and Replace” and content search found very helpful...(read more)

  Read the article

• ReportViewer configuration

  - by Suresh Behera

  Some of my team member was facing configuring report viewer.Most of the post are confusing or not able to understand properly. This is what we concluded and thought to put a quick note on it. No 1 Section : This is the report name No 2 Section : ReportServer make the default name on URL sometime even if you don’t see on browser you still need to try with “Reportserver” on url. In our case the DB/report team did not mentioned nothing about “ReprtServer” on URL but it was needed. No 3. “Adventure Works...(read more)

  Read the article

• Excel - graphing mean and standard deviation

  - by joe_shmoe

  Hi all, I have measurements for multiple devices, and have their mean and sd values. I would like to produce a chart that would show these values, and I think the best would be if I could have something that looks like a bar chart(-ish) - the device names in x axis, values in y axis, and for each device to have a 'floating' bar that would represent values (mean - sd :: mean + sd), and some marker in the middle to show the actual mean value. is it doable? or would you suggest some other chart? Thanks a lot

  Read the article

• SO-Aware @ TechReady (Microsoft Event)

  - by SURESH GIRIRAJAN

  A session on SO-Aware is presented at Microsoft TechReady event this week check here for more details : http://tellagostudios.com/blog/so-aware-highlighted-microsoft-techready Check here for more details on SO-Aware and how to leverage within your enterprise if you’re using BizTalk Server, WCF Services and services build on Azure. It provides lot of capability such as: o    Centralized service repository o    Centralized configuration management o    Service testing o    Monitoring o    Transparent integration with technologies such as Visual Studio, BizTalk Server, Windows Server & Azure AppFabric among many others o    SO-Aware Test Workbench provides developers with a visually rich environment to model and control the execution of load and functional tests in a SOA infrastructure. This tool includes the first native WCF load testing engine allowing developers to transparently load test applications built on Microsoft's service oriented technologies such as WCF, BizTalk Server or the Windows Server or Azure AppFabric.

  Read the article

• Internet Explorer 8 developer tools debugging on Windows XP

  - by Suresh Behera

  Although , Microsoft officially not going support Windows XP  but still many healthcare companies preferred to use windows XP internally. They buy windows 7 laptop and convert to Windows XP.This sounds funny but it true. I was trying to use IE’s Developer tools(F12) to debug one of JavaScript issue found that “jscript.dll” has to be registered explicitly    to your machine. even if i have IE8 and javsascript enabled on browser it was not stopping on breakpoint. Solution : register...(read more)

  Read the article

• Application Integration Future &ndash; BizTalk Server &amp; Windows Azure (TechEd 2012)

  - by SURESH GIRIRAJAN

  I am really excited to see lot of new news around BizTalk in TechEd 2012. I was recently watching the session presented by Sriram and Rajesh on “Application Integration Futures: The Road Map and What's Next on Windows Azure”. It was great session and lot of interesting stuff about the feature updates for BizTalk and Azure integration. I have highlighted them below, definitely customers who haven’t started using Microsoft BizTalk ESB Toolkit should start using them which is going to be part of the core BizTalk product in future release, which is cool… BizTalk Server feature enhancements Manageability: ESB Tool Kit is going to be part of the core BizTalk product and Setup. Visualize BizTalk artifact dependencies in BizTalk administration console. HIS administration using configuration files. Performance: Improvements in ordered send port scenarios Improved performance in dynamic send ports and ESB, also to configure BizTalk host handler for dynamic send ports. Right now it runs under default host, which does not enable to scale. MLLP adapter enhancements and DB2 client transaction load balancing / client bulk insert. Platform Support: Visual Studio 2012, Windows 8 Server, SQL Server 2012, Office 15 and System Center 2012. B2B enhancements to support latest industry standards natively. Connectivity Improvements: Consume REST service directly in BizTalk SharePoint integration made easier. Improvements to SMTP adapter, to add macros for sending same email with different content to different parties. Connectivity to Azure Service Bus relay, queues and topics. DB2 client connectivity to SQL Server and SQL Server connectivity to Informix. CICS Http client connectivity to Windows. Azure: Use Azure as IaaS/PaaS for BizTalk environment. Use Azure to provision BizTalk environment for test environment / development. Later move to On-premises or build a Hybrid cloud approach. Eliminate HW procurement for BizTalk environment for testing / demos / development etc. Enable to create BizTalk farm easily and remove/add more servers as needed. EAI Service: EAI Bridge Protocol transformation Message Transformation Running custom code Message Enrichment Hybrid Connectivity LOB Applications On-premises Application On-premises Connectivity to Applications in the cloud Queues/ Topics Ftp Devices Web Services Bridge can be customized based on the service needs to provide different capabilities needed as part of the bridge. Look at the sample for EDI bridge for EDI service sample. Also with Tracking enabled through the portal. http://msdn.microsoft.com/en-us/library/windowsazure/hh674490 Adapters: Service Bus Messaging adapter - New adapter added. WebHttp adapter - For REST services. NetTcpRelay adapter - New adapter added. I will start posting more and once I start playing with this…

  Read the article

• HD read error while booting linux

  - by sidharth sharma

  I have been dual booting windows 7 and ubuntu on my laptop since the past 3 years and all was working fine until I started getting logs like ata1.00: status: { DRDY ERR } ata1.00: error: { UNC } ata1.00: configured for UDMA/133 sd 0:0:0:0: [sda] Unhandled sense code sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense key: Medium Error [Current][discreptor] I figured it was a hardware problem and ignored it as long as I could until the HD crashed on me. Then I got a brand new HD and put on windows and ubuntu afresh on it but the problem still persists. Any Help?

  Read the article

• end_request: I/O error, dev sda, sector xxxxxxxxx

  - by muruga

  I have a IBM server. This server contains 3 hard disk with RAID 5. It was working fine earlier. Unfortunately this machine got the following error message. After that I have rebooted the systems. After that I am getting the following error message in kern.log and demsg kernel: [65896.678870] end_request: I/O error, dev sda, sector 17430271 kernel: [69263.783957] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK : [69263.783957] sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] kernel: [69263.783957] sd 0:0:0:0: [sda] Add. Sense: Internal target failure Whether it is kernel problem or hard disk problem or Raid problem

  Read the article

• Executing a command as apache

  - by Lord Loh.

  This script keeps outputting a 1. and I cannot understand why. <?php passthru("nohup sudo rndc reload sd.example.com",$op); print_r($op); ?> I have also tried the above code without the nohup. I have the following line in my sudoers file apache ALL = NOPASSWD: /usr/sbin/rndc reload sd.example.com Just to test, temporally, I allowed apache a shell, logged in as apache by sudo su apache and successfully managed to execute sudo rndc reload sd.example.com. I do not see any error message in my log files wither. What could I be possibly doing wrong? None of the similar threads have pointed me to anything that solved my problem or debug it.

  Read the article

• Readyboost on Windows 7 x64

  - by RobLaw84

  I'm thinking of bying 1 or more flash drives or an SD card to use with the readyboost function on by 64bit Windows 7 machine. I have a few questions regarding it before i put my hand in my pocket and buy anything. If i go ahead I would be using the fastest available flash/SD. I have 6GB of RAM current installed so will readyboost make any difference to boot / program load times? Will 2 x 2GB flash drives be quicker than 1 x 4GB or is the limitation on the motherboard? Would an SD card better than USB flash drive? thanks

  Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >