Search Results

Search found 3481 results on 140 pages for 'dvd region'.

Page 130/140 | < Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >

  • Running out of memory.. How?

    - by maxdj
    I'm attempting to write a solver for a particular puzzle. It tries to find a solution by trying every possible move one at a time until it finds a solution. The first version tried to solve it depth-first by continually trying moves until it failed, then backtracking, but this turned out to be too slow. I have rewritten it to be breadth-first using a queue structure, but I'm having problems with memory management. Here are the relevant parts: int main(int argc, char *argv[]) { ... int solved = 0; do { solved = solver(queue); } while (!solved && !pblListIsEmpty(queue)); ... } int solver(PblList *queue) { state_t *state = (state_t *) pblListPoll(queue); if (is_solution(state->pucks)) { print_solution(state); return 1; } state_t *state_cp; puck new_location; for (int p = 0; p < puck_count; p++) { for (dir i = NORTH; i <= WEST; i++) { if (!rules(state->pucks, p, i)) continue; new_location = in_dir(state->pucks, p, i); if (new_location.x != -1) { state_cp = (state_t *) malloc(sizeof(state_t)); state_cp->move.from = state->pucks[p]; state_cp->move.direction = i; state_cp->prev = state; state_cp->pucks = (puck *) malloc (puck_count * sizeof(puck)); memcpy(state_cp->pucks, state->pucks, puck_count * sizeof(puck)); /*CRASH*/ state_cp->pucks[p] = new_location; pblListPush(queue, state_cp); } } } return 0; } When I run it I get the error: ice(90175) malloc: *** mmap(size=2097152) failed (error code=12) *** error: can't allocate region *** set a breakpoint in malloc_error_break to debug Bus error The error happens around iteration 93,000. From what I can tell, the error message is from malloc failing, and the bus error is from the memcpy after it. I have a hard time believing that I'm running out of memory, since each game state is only ~400 bytes. Yet that does seem to be what's happening, seeing as the activity monitor reports that it is using 3.99GB before it crashes. I'm using http://www.mission-base.com/peter/source/ for the queue structure (it's a linked list). Clearly I'm doing something dumb. Any suggestions?

    Read the article

  • Why is this simple Mobile Form not closed when using the player

    - by ajhvdb
    Hi, I created this simple sample Form with the close button. Everything is working as expected when NOT using the Interop.WMPLib.dll I've seen other applications using this without problems but why isn't the Form process closed when I just add the line: SoundPlayer myPlayer = new SoundPlayer(); and of course dispose it: if (myPlayer != null) { myPlayer.Dispose(); myPlayer = null; } The Form closes but the debugger VS2008 is still active. The Form project and the dll are still active. If you send me an email to [email protected], I can send you the zipped project. Below is the class for the dll: using System; using System.Collections.Generic; using System.Text; using System.Threading; using System.Runtime.InteropServices; using WMPLib; namespace WindowsMobile.Utilities { public delegate void SoundPlayerStateChanged(SoundPlayer sender, SoundPlayerState newState); public enum SoundPlayerState { Stopped, Playing, Paused, } public class SoundPlayer : IDisposable { [DllImport("coredll")] public extern static int waveOutSetVolume(int hwo, uint dwVolume); [DllImport("coredll")] public extern static int waveOutGetVolume(int hwo, out uint dwVolume); WindowsMediaPlayer myPlayer = new WindowsMediaPlayer(); public SoundPlayer() { myPlayer.uiMode = "invisible"; myPlayer.settings.volume = 100; } string mySoundLocation = string.Empty; public string SoundLocation { get { return mySoundLocation; } set { mySoundLocation = value; } } public void Pause() { myPlayer.controls.pause(); } public void PlayLooping() { Stop(); myPlayer.URL = mySoundLocation; myPlayer.settings.setMode("loop", true); } public int Volume { get { return myPlayer.settings.volume; } set { myPlayer.settings.volume = value; } } public void Play() { Stop(); myPlayer.URL = mySoundLocation; myPlayer.controls.play(); } public void Stop() { myPlayer.controls.stop(); myPlayer.close(); } #region IDisposable Members public void Dispose() { try { Stop(); } catch (Exception) { } // need this otherwise the process won't exit?! try { int ret = Marshal.FinalReleaseComObject(myPlayer); } catch (Exception) { } myPlayer = null; GC.Collect(); } #endregion } }

    Read the article

  • How to use command bindings in user controls in wpf?

    - by Sam
    In MainWindow the commandbinding works fine. In UserControl1 it doesnt work. Note the datacontext is set correctly as is evidenced by the content of the button which is the result of a binding. I am not trying to bind the command in the usercontrol to a command in mainwindow or any other such trickery. I am just trying to replicate what I did in MainWindow in UserControl1. // MainWindow xaml <StackPanel> <Button Content="Click Here" Command="{Binding ClickHereCommand}" Height="25" Width="90"></Button> <local:UserControl1></local:UserControl1> </StackPanel> // MainWindow public partial class MainWindow : Window { public static RoutedCommand ClickHereCommand { get; set; } public MainWindow() { InitializeComponent(); this.DataContext = this; ClickHereCommand = new RoutedCommand(); CommandBindings.Add(new CommandBinding(ClickHereCommand, ClickHereExecuted)); } public void ClickHereExecuted(object sender, ExecutedRoutedEventArgs e) { System.Windows.MessageBox.Show("hello"); } } // UserControl1 xaml <UserControl x:Class="CommandBindingTest.UserControl1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" mc:Ignorable="d" d:DesignHeight="300" d:DesignWidth="300" x:Name="root"> <Grid DataContext="{Binding ElementName=root}" > <Button Content="{Binding ButtonContent}" Command="{Binding ClickHereCommand}" Height="25" Width="90"></Button> </Grid> </UserControl> // UserControl1 public partial class UserControl1 : UserControl, INotifyPropertyChanged { private string _ButtonContent; public string ButtonContent { get { return _ButtonContent; } set { if (_ButtonContent != value) { _ButtonContent = value; OnPropertyChanged("ButtonContent"); } } } public static RoutedCommand ClickHereCommand { get; set; } public UserControl1() { InitializeComponent(); ClickHereCommand = new RoutedCommand(); CommandBindings.Add(new CommandBinding(ClickHereCommand, ClickHereExecuted)); ButtonContent = "Click Here"; } public void ClickHereExecuted(object sender, ExecutedRoutedEventArgs e) { System.Windows.MessageBox.Show("hello from UserControl1"); } #region INotifyPropertyChanged Members public event PropertyChangedEventHandler PropertyChanged; public void OnPropertyChanged(string name) { if (PropertyChanged != null) { PropertyChanged(this, new PropertyChangedEventArgs(name)); } } #endregion }

    Read the article

  • How to dispose off custom object from within custom membership provider

    - by IrfanRaza
    I have created my custom MembershipProvider. I have used an instance of the class DBConnect within this provider to handle database functions. Please look at the code below: public class SGIMembershipProvider : MembershipProvider { #region "[ Property Variables ]" private int newPasswordLength = 8; private string connectionString; private string applicationName; private bool enablePasswordReset; private bool enablePasswordRetrieval; private bool requiresQuestionAndAnswer; private bool requiresUniqueEmail; private int maxInvalidPasswordAttempts; private int passwordAttemptWindow; private MembershipPasswordFormat passwordFormat; private int minRequiredNonAlphanumericCharacters; private int minRequiredPasswordLength; private string passwordStrengthRegularExpression; private MachineKeySection machineKey; **private DBConnect dbConn;** #endregion ....... public override bool ChangePassword(string username, string oldPassword, string newPassword) { if (!ValidateUser(username, oldPassword)) return false; ValidatePasswordEventArgs args = new ValidatePasswordEventArgs(username, newPassword, true); OnValidatingPassword(args); if (args.Cancel) { if (args.FailureInformation != null) { throw args.FailureInformation; } else { throw new Exception("Change password canceled due to new password validation failure."); } } SqlParameter[] p = new SqlParameter[3]; p[0] = new SqlParameter("@applicationName", applicationName); p[1] = new SqlParameter("@username", username); p[2] = new SqlParameter("@password", EncodePassword(newPassword)); bool retval = **dbConn.ExecuteSP("User_ChangePassword", p);** return retval; } //ChangePassword public override void Initialize(string name, NameValueCollection config) { if (config == null) { throw new ArgumentNullException("config"); } ...... ConnectionStringSettings ConnectionStringSettings = ConfigurationManager.ConnectionStrings[config["connectionStringName"]]; if ((ConnectionStringSettings == null) || (ConnectionStringSettings.ConnectionString.Trim() == String.Empty)) { throw new ProviderException("Connection string cannot be blank."); } connectionString = ConnectionStringSettings.ConnectionString; **dbConn = new DBConnect(connectionString); dbConn.ConnectToDB();** ...... } //Initialize ...... } // SGIMembershipProvider I have instantiated dbConn object within Initialize() event. My problem is that how could i dispose off this object when object of SGIMembershipProvider is disposed off. I know the GC will do this all for me, but I need to explicitly dispose off that object. Even I tried to override Finalize() but there is no such overridable method. I have also tried to create destructor for SGIMembershipProvider. Can anyone provide me solution.

    Read the article

  • emacs: how do I use edebug on code that is defined in a macro?

    - by Cheeso
    I don't even know the proper terminology for this lisp syntax, so I don't know if the words I'm using to ask the question, make sense. But the question makes sense, I'm sure. So let me just show you. cc-mode (cc-fonts.el) has things called "matchers" which are bits of code that run to decide how to fontify a region of code. That sounds simple enough, but the matcher code is in a form I don't completely understand, with babckticks and comma-atsign and just comma and so on, and furthermore it is embedded in a c-lang-defcost, which itself is a macro. And I want to run edebug on that code. Look: (c-lang-defconst c-basic-matchers-after "Font lock matchers for various things that should be fontified after generic casts and declarations are fontified. Used on level 2 and higher." t `(;; Fontify the identifiers inside enum lists. (The enum type ;; name is handled by `c-simple-decl-matchers' or ;; `c-complex-decl-matchers' below. ,@(when (c-lang-const c-brace-id-list-kwds) `((,(c-make-font-lock-search-function (concat "\\<\\(" (c-make-keywords-re nil (c-lang-const c-brace-id-list-kwds)) "\\)\\>" ;; Disallow various common punctuation chars that can't come ;; before the '{' of the enum list, to avoid searching too far. "[^\]\[{}();,/#=]*" "{") '((c-font-lock-declarators limit t nil) (save-match-data (goto-char (match-end 0)) (c-put-char-property (1- (point)) 'c-type 'c-decl-id-start) (c-forward-syntactic-ws)) (goto-char (match-end 0))))))) I am reading up on lisp syntax to figure out what those things are and what to call them, but aside from that, how can I run edebug on the code that follows the comment that reads ;; Fontify the identifiers inside enum lists. ? I know how to run edebug on a defun - just invoke edebug-defun within the function's definition, and off I go. Is there a corresponding thing I need to do to edebug the cc-mode matcher code forms?

    Read the article

  • WPF: Problem with TreeView databinding

    - by Am
    Hi, I have a tree view defined as follows: <TreeView Grid.Row="0" Grid.Column="0" Margin="0" FlowDirection="LeftToRight" ItemTemplate="{StaticResource NavigationHeaderTemplate}" Name="TreeView2"> </TreeView> The data binding is: public class ViewTag : INotifyPropertyChanged { private string _tagName; public string TagName { get { return _tagName; } set { _tagName = value; PropertyChanged(this, new PropertyChangedEventArgs("Tag Name")); } } private ObservableCollection<ViewTag> _childTags; public ObservableCollection<ViewTag> ChildTags { get { return _childTags; } set { _childTags = value; OnPropertyChanged(new PropertyChangedEventArgs("Child Tags")); } } #region INotifyPropertyChanged Members public event PropertyChangedEventHandler PropertyChanged; public void OnPropertyChanged(PropertyChangedEventArgs e) { if (PropertyChanged != null) PropertyChanged(this, e); } #endregion public ViewTag(string tagName, ObservableCollection<ViewTag> childTags) { _tagName = tagName; _childTags = childTags; } } And my test binding is: List<ViewTag> tempTags = new List<ViewTag>(); ViewTag t1, t2, t3, t4, t5, t6; t1 = new ViewTag("Computers", null); t2 = new ViewTag("Chemistry", null); t3 = new ViewTag("Physics", null); var t123 = new ObservableCollection<ViewTag>(); t123.Add(t1); t123.Add(t2); t123.Add(t3); t4 = new ViewTag("Science", t123); var t1234 = new ObservableCollection<ViewTag>(); t1234.Add(t4); t5 = new ViewTag("All Items", t1234); t6 = new ViewTag("Untagged", null); var tall = new ObservableCollection<ViewTag>(); tall.Add(t5); tall.Add(t6); xy.Add(new ViewNavigationTree() { Header = "Tags", Image = "img/tags2.ico", Children = tall }); var rootFolders = eDataAccessLayer.RepositoryFacrory.Instance.MonitoredDirectoriesRepository.Directories.ToList(); var viewFolders = new ObservableCollection<ViewTag>(); foreach (var vf in rootFolders) { viewFolders.Add(new ViewTag(vf.FullPath, null)); } xy.Add(new ViewNavigationTree() { Header = "Folders", Image = "img/folder_16x16.png", Children = viewFolders }); xy.Add(new ViewNavigationTree() { Header = "Authors", Image = "img/user_16x16.png", Children = null }); xy.Add(new ViewNavigationTree() { Header = "Publishers", Image = "img/powerplant_32.png", Children = null }); TreeView2.ItemsSource = xy; Problem is, the tree only shows: + Tags All Items Untagged + Folders dir 1 dir 2 ... Authors Publishers The items I added under "All Items" aren't displayed. Being a WPF nub, i can't put my finger on the problem. Any help will be greatly appriciated.

    Read the article

  • problem with JsonStore and JsonReader

    - by kalan
    Hello, In my ExtJS application I use EditorGridPanel to show data from server. var applicationsGrid = new Ext.grid.EditorGridPanel({ region: 'west', layout: 'fit', title: '<img src="../../Content/img/app.png" /> ??????????', collapsible: true, margins: '0 0 5 5', split: true, width: '30%', listeners: { 'viewready': { fn: function() { applicationsGridStatusBar.setText('??????????: ' + applicationsStore.getTotalCount()); } } }, store: applicationsStore, loadMask: { msg: '????????...' }, sm: new Ext.grid.RowSelectionModel({ singleSelect: true, listeners: { 'rowselect': { fn: applicationsGrid_onRowSelect} } }), viewConfig: { forceFit: true }, tbar: [{ icon: '../../Content/img/add.gif', text: '????????' }, '-', { icon: '../../Content/img/delete.gif', text: '???????' }, '-'], bbar: applicationsGridStatusBar, columns: [{ header: '??????????', dataIndex: 'ApplicationName', tooltip: '???????????? ??????????', sortable: true, editor: { xtype: 'textfield', allowBlank: false } }, { header: '<img src="../../Content/img/user.png" />', dataIndex: 'UsersCount', align: 'center', fixed: true, width: 50, tooltip: '?????????? ????????????? ??????????', sortable: true }, { header: '<img src="../../Content/img/role.gif" />', dataIndex: 'RolesCount', align: 'center', fixed: true, width: 50, tooltip: '?????????? ????? ??????????', sortable: true}] }); When I use JsonStore without reader it works, but when I try to update any field it uses my 'create' url instead of 'update'. var applicationsStore = new Ext.data.JsonStore({ root: 'applications', totalProperty: 'total', idProperty: 'ApplicationId', messageProperty: 'message', fields: [{ name: 'ApplicationId' }, { name: 'ApplicationName', allowBlank: false }, { name: 'UsersCount', allowBlank: false }, { name: 'RolesCount', allowBlank: false}], id: 'app1234', proxy: new Ext.data.HttpProxy({ api: { create: '/api/applications/getapplicationslist1', read: '/api/applications/getapplicationslist', update: '/api/applications/getapplicationslist2', destroy: '/api/applications/getapplicationslist3' } }), autoSave: true, autoLoad: true, writer: new Ext.data.JsonWriter({ encode: false, listful: false, writeAllFields: false }) }); I believe that the problem is that I don't use reader, but when I use JsonReader grid stops showing any data at all. var applicationReader = new Ext.data.JsonReader({ root: 'applications', totalProperty: 'total', idProperty: 'ApplicationId', messageProperty: 'message', fields: [{ name: 'ApplicationId' }, { name: 'ApplicationName', allowBlank: false }, { name: 'UsersCount', allowBlank: false }, { name: 'RolesCount', allowBlank: false}] }); var applicationsStore = new Ext.data.JsonStore({ id: 'app1234', proxy: new Ext.data.HttpProxy({ api: { create: '/api/applications/getapplicationslist1', read: '/api/applications/getapplicationslist', update: '/api/applications/getapplicationslist2', destroy: '/api/applications/getapplicationslist3' } }), reader: applicationReader, autoSave: true, autoLoad: true, writer: new Ext.data.JsonWriter({ encode: false, listful: false, writeAllFields: false }) }); So, does anyone know what the problem might be and how to solve it. The data returned from my server is Json-formated and seams to be ok {"message":"test","total":2,"applications":[{"ApplicationId":"f82dc920-17e7-45b5-98ab-03416fdf52b2","ApplicationName":"Archivist","UsersCount":6,"RolesCount":3},{"ApplicationId":"054e2e78-e15f-4609-a9b2-81c04aa570c8","ApplicationName":"Test","UsersCount":1,"RolesCount":0}]}

    Read the article

  • CLR: Multi Param Aggregate, Argument not in Final Output?

    - by OMG Ponies
    Why is my delimiter not appearing in the final output? It's initialized to be a comma, but I only get ~5 white spaces between each attribute using: SELECT [article_id] , dbo.GROUP_CONCAT(0, t.tag_name, ',') AS col FROM [AdventureWorks].[dbo].[ARTICLE_TAG_XREF] atx JOIN [AdventureWorks].[dbo].[TAGS] t ON t.tag_id = atx.tag_id GROUP BY article_id The bit for DISTINCT works fine, but it operates within the Accumulate scope... Output: article_id | col ------------------------------------------------- 1 | a a b c I only have rudimentary C# API knowledge... C# Code: using System; using System.Data; using System.Data.SqlClient; using System.Data.SqlTypes; using Microsoft.SqlServer.Server; using System.Xml.Serialization; using System.Xml; using System.IO; using System.Collections; using System.Text; [Serializable] [SqlUserDefinedAggregate(Format.UserDefined, MaxByteSize = 8000)] public struct GROUP_CONCAT : IBinarySerialize { ArrayList list; string delimiter; public void Init() { list = new ArrayList(); delimiter = ","; } public void Accumulate(SqlBoolean isDistinct, SqlString Value, SqlString separator) { delimiter = (separator.IsNull) ? "," : separator.Value ; if (!Value.IsNull) { if (isDistinct) { if (!list.Contains(Value.Value)) { list.Add(Value.Value); } } else { list.Add(Value.Value); } } } public void Merge(GROUP_CONCAT Group) { list.AddRange(Group.list); } public SqlString Terminate() { string[] strings = new string[list.Count]; for (int i = 0; i < list.Count; i++) { strings[i] = list[i].ToString(); } return new SqlString(string.Join(delimiter, strings)); } #region IBinarySerialize Members public void Read(BinaryReader r) { int itemCount = r.ReadInt32(); list = new ArrayList(itemCount); for (int i = 0; i < itemCount; i++) { this.list.Add(r.ReadString()); } } public void Write(BinaryWriter w) { w.Write(list.Count); foreach (string s in list) { w.Write(s); } } #endregion }

    Read the article

  • Is there anything wrong with having a few private methods exposing IQueryable<T> and all public meth

    - by Nate Bross
    I'm wondering if there is a better way to approach this problem. The objective is to reuse code. Let’s say that I have a Linq-To-SQL datacontext and I've written a "repository style" class that wraps up a lot of the methods I need and exposes IQueryables. (so far, no problem). Now, I'm building a service layer to sit on top of this repository, many of the service methods will be 1<-1 with repository methods, but some will not. I think a code sample will illustrate this better than words. public class ServiceLayer { MyClassDataContext context; IMyRepository rpo; public ServiceLayer(MyClassDataContext ctx) { context = ctx; rpo = new MyRepository(context); } private IQueryable<MyClass> ReadAllMyClass() { // pretend there is some complex business logic here // and maybe some filtering of the current users access to "all" // that I don't want to repeat in all of the public methods that access // MyClass objects. return rpo.ReadAllMyClass(); } public IEnumerable<MyClass> GetAllMyClass() { // call private IQueryable so we can do attional "in-database" processing return this.ReadAllMyClass(); } public IEnumerable<MyClass> GetActiveMyClass() { // call private IQueryable so we can do attional "in-database" processing // in this case a .Where() clause return this.ReadAllMyClass().Where(mc => mc.IsActive.Equals(true)); } #region "Something my class MAY need to do in the future" private IQueryable<MyOtherTable> ReadAllMyOtherTable() { // there could be additional constrains which define // "all" for the current user return context.MyOtherTable; } public IEnumerable<MyOtherTable> GetAllMyOtherTable() { return this.ReadAllMyOtherTable(); } public IEnumerable<MyOtherTable> GetInactiveOtherTable() { return this.ReadAllMyOtherTable.Where(ot => ot.IsActive.Equals(false)); } #endregion } This particular case is not the best illustration, since I could just call the repository directly in the GetActiveMyClass method, but let’s presume that my private IQueryable does some extra processing and business logic that I don't want to replicate in both of my public methods. Is that a bad way to attack an issue like this? I don't see it being so complex that it really warrants building a third class to sit between the repository and the service class, but I'd like to get your thoughts. For the sake of argument, lets presume two additional things. This service is going to be exposed through WCF and that each of these public IEnumerable methods will be calling a .Select(m => m.ToViewModel()) on each returned collection which will convert it to a POCO for serialization. The service will eventually need to expose some context.SomeOtherTable which wont be wrapped into the repository.

    Read the article

  • Suggestions In Porting ASP.NET to MVC.NET - Is storing SiteConfiguration in Cache RESTful?

    - by DaveDev
    I've been tasked with porting/refactoring a Web Application Platform that we have from ASP.NET to MVC.NET. Ideally I could use all the existing platform's configurations to determine the properties of the site that is presented. Is it RESTful to keep a SiteConfiguration object which contains all of our various page configuration data in the System.Web.Caching.Cache? There are a lot of settings that need to be loaded when the user acceses our site so it's inefficient for each user to have to load the same settings every time they access. Some data the SiteConfiguration object contains is as follows and it determines what Master Page / site configuration / style / UserControls are available to the client, public string SiteTheme { get; set; } public string Region { private get; set; } public string DateFormat { get; set; } public string NumberFormat { get; set; } public int WrapperType { private get; set; } public string LabelFileName { get; set; } public LabelFile LabelFile { get; set; } // the following two are the heavy ones // PageConfiguration contains lots of configuration data for each panel on the page public IList<PageConfiguration> Pages { get; set; } // This contains all the configurations for the factsheets we produce public List<ConfiguredFactsheet> ConfiguredFactsheets { get; set; } I was thinking of having a URL structure like this: www.MySite1.com/PageTemplate/UserControl/ the domain determines the SiteConfiguration object that is created, where MySite1.com is SiteId = 1, MySite2.com is SiteId = 2. (and in turn, style, configurations for various pages, etc.) PageTemplate is the View that will be rendered and simply defines a layout for where I'm going to inject the UserControls Can somebody please tell me if I'm completely missing the RESTful point here? I'd like to refactor the platform into MVC because it's better to work in but I want to do it right but with a minimum of reinventing-the-wheel because otherwise it won't get approval. Any suggestions otherwise? Thanks

    Read the article

  • Data Annotations validation Built into model

    - by Josh
    I want to build an object model that automatically wires in validation when I attempt to save an object. I am using DataAnnotations for my validation, and it all works well, but I think my inheritance is whacked. I am looking here for some guidance on a better way to wire in my validation. So, to build in validation I have this interface public interface IValidatable { bool IsValid { get; } ValidationResponse ValidationResults { get; } void Validate(); } Then, I have a base class that all my objects inherit from. I did a class because I wanted to wire in the validation calls automatically. The issue is that the validation has to know the type of the class is it validating. So I use Generics like so. public class CoreObjectBase<T> : IValidatable where T : CoreObjectBase<T> { #region IValidatable Members public virtual bool IsValid { get { // First, check rules that always apply to this type var result = new Validator<T>().Validate((T)this); // return false if any violations occurred return !result.HasViolations; } } public virtual ValidationResponse ValidationResults { get { var result = new Validator<T>().Validate((T)this); return result; } } public virtual void Validate() { // First, check rules that always apply to this type var result = new Validator<T>().Validate((T)this); // throw error if any violations were detected if (result.HasViolations) throw new RulesException(result.Errors); } #endregion } So, I have this circular inheritance statement. My classes look like this then: public class MyClass : CoreObjectBase<MyClass> { } But the problem occurs when I have a more complicated model. Because I can only inherit from one class, when I have a situation where inheritance makes sense I believe the child classes won't have validation on their properties. public class Parent : CoreObjectBase<Parent> { //properties validated } public class Child : Parent { //properties not validated? } I haven't really tested the validation in these cases yet, but I am pretty sure that anything in child with a data annotation on it will not be automatically validated when I call Child.Validate(); due to the way the inheritance is configured. Is there a better way to do this?

    Read the article

  • WPF/INotifyPropertyChanged, change the value of txtA, the txtB and txtC should change automatically?

    - by user1033098
    I supposed, once i change the value of txtA, the txtB and txtC would change automatically, since i have implemented INotifyPropertyChanged for ValueA. But they were not updated on UI. txtB was always 100, and txtC was always -50. I don't know what's the reason. My Xaml.. <Window x:Class="WpfApplicationReviewDemo.MainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="MainWindow" Height="350" Width="525"> <StackPanel> <TextBox Name="txtA" Text="{Binding ValueA}" /> <TextBox Name="txtB" Text="{Binding ValueB}" /> <TextBox Name="txtC" Text="{Binding ValueC}" /> </StackPanel> </Window> My code behind... public partial class MainWindow : Window { public MainWindow() { InitializeComponent(); this.DataContext = new Model(); } } public class Model : INotifyPropertyChanged { private decimal valueA; public decimal ValueA { get { return valueA; } set { valueA = value; PropertyChanged(this, new PropertyChangedEventArgs("ValueA")); } } private decimal valueB; public decimal ValueB { get { valueB = ValueA + 100; return valueB; } set { valueB = value; PropertyChanged(this, new PropertyChangedEventArgs("ValueB")); } } private decimal valueC; public decimal ValueC { get { valueC = ValueA - 50; return valueC; } set { valueC = value; PropertyChanged(this, new PropertyChangedEventArgs("ValueC")); } } #region INotifyPropertyChanged Members public event PropertyChangedEventHandler PropertyChanged; #endregion } After i add code to the set method of ValueA property, it works. public decimal ValueA { get { return valueA; } set { valueA = value; PropertyChanged(this, new PropertyChangedEventArgs("ValueA")); PropertyChanged(this, new PropertyChangedEventArgs("ValueB")); PropertyChanged(this, new PropertyChangedEventArgs("ValueC")); } } But I supposed it should be automatically refresh/updated for txtB and txtC. Please advise.

    Read the article

  • SQL Server 2008 R2 Enterprise won't install on Windows 2008 R2 Enterprise

    - by Carlos Paulino
    I've been trying to install SQL Server on a new Windows Server 2008. I have tried everything but I haven't been able to narrow down the problem. When the installation fails I get " Exit code (Decimal): -2068643839". The problem with this is that according to Microsoft this is a generic error code. I follow their guide to look into the detail.txt inside C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\ But I can't find something that specifies the exact error. Any suggestions ? Thanks in advanced. I uploaded to detail.txt to http://www.megaupload.com/?d=0MV46SZH because it is to big to paste here. Below is the summary.txt ---------- Overall summary: Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup. Exit code (Decimal): -2068643839 Exit facility code: 1203 Exit error code: 1 Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup. Start time: 2011-02-28 11:29:56 End time: 2011-02-28 11:34:45 Requested action: Install Machine Properties: Machine name: SA-SERVER Machine processor count: 8 OS version: Windows Server 2008 R2 OS service pack: Service Pack 1 OS region: United States OS language: English (United States) OS architecture: x64 Process architecture: 64 Bit OS clustered: No Product features discovered: Product Instance Instance ID Feature Language Edition Version Clustered Package properties: Description: SQL Server Database Services 2008 R2 ProductName: SQL Server 2008 R2 Type: RTM Version: 10 SPLevel: 0 Installation location: F:\x64\setup\ Installation edition: ENTERPRISE User Input Settings: ACTION: Install ADDCURRENTUSERASSQLADMIN: True AGTSVCACCOUNT: NT AUTHORITY\SYSTEM AGTSVCPASSWORD: ***** AGTSVCSTARTUPTYPE: Manual ASBACKUPDIR: Backup ASCOLLATION: Latin1_General_CI_AS ASCONFIGDIR: Config ASDATADIR: Data ASDOMAINGROUP: <empty> ASLOGDIR: Log ASPROVIDERMSOLAP: 1 ASSVCACCOUNT: <empty> ASSVCPASSWORD: ***** ASSVCSTARTUPTYPE: Automatic ASSYSADMINACCOUNTS: <empty> ASTEMPDIR: Temp BROWSERSVCSTARTUPTYPE: Disabled CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110228_112601\ConfigurationFile.ini CUSOURCE: ENABLERANU: False ENU: True ERRORREPORTING: False FARMACCOUNT: <empty> FARMADMINPORT: 0 FARMPASSWORD: ***** FEATURES: SQLENGINE,BIDS,CONN,IS,BC,SDK,SSMS,ADV_SSMS,SNAC_SDK,OCS FILESTREAMLEVEL: 0 FILESTREAMSHARENAME: <empty> FTSVCACCOUNT: <empty> FTSVCPASSWORD: ***** HELP: False IACCEPTSQLSERVERLICENSETERMS: False INDICATEPROGRESS: False INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\ INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\ INSTALLSQLDATADIR: <empty> INSTANCEDIR: D:\SQLServer INSTANCEID: MSSQLSERVER INSTANCENAME: MSSQLSERVER ISSVCACCOUNT: NT AUTHORITY\SYSTEM ISSVCPASSWORD: ***** ISSVCSTARTUPTYPE: Automatic NPENABLED: 0 PASSPHRASE: ***** PCUSOURCE: PID: ***** QUIET: False QUIETSIMPLE: False ROLE: AllFeatures_WithDefaults RSINSTALLMODE: FilesOnlyMode RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE RSSVCPASSWORD: ***** RSSVCSTARTUPTYPE: Automatic SAPWD: ***** SECURITYMODE: SQL SQLBACKUPDIR: <empty> SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS SQLSVCACCOUNT: NT AUTHORITY\SYSTEM SQLSVCPASSWORD: ***** SQLSVCSTARTUPTYPE: Automatic SQLSYSADMINACCOUNTS: SA-SERVER\Administrator SQLTEMPDBDIR: <empty> SQLTEMPDBLOGDIR: <empty> SQLUSERDBDIR: <empty> SQLUSERDBLOGDIR: <empty> SQMREPORTING: False TCPENABLED: 1 UIMODE: Normal X86: False Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110228_112601\ConfigurationFile.ini Detailed results: Feature: Database Engine Services Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: SQL Client Connectivity SDK Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Integration Services Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Client Tools Connectivity Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Management Tools - Complete Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Management Tools - Basic Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Client Tools SDK Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Client Tools Backwards Compatibility Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Business Intelligence Development Studio Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Microsoft Sync Framework Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Rules with failures: Global rules: Scenario specific rules: Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110228_112601\SystemConfigurationCheck_Report.htm

    Read the article

  • WDS 2008 R2 DHCP Error

    - by scampbell
    Im having a problem where I get the error 'An error occurred while obtaining an IP address from the DHCP server. Please check to ensure that there is an operational DHCP server on this network segment' when booting from a standard WDS boot.wim image taken from a Windows 7 DVD. I am using Server 2008 R2 and am adding the drivers to the boot using WDS, but also have the problem if the drivers are injected beforehand using DISM. When the error occurs I can shift + F10 and IPCONFIG and see it HAS picked up an internal IP from DHCP. Seems maybe it is timing out before it gets the IP? DHCP server is not on the WDS box but is in the same subnet. As per some fixes I have read I enabled RSTP on my switches but that didnt help. I have included the end of setupact.log to see if any of you have any ideas. Seems to be failing but as I say, the network IS initialized as I can see the internal IP assigned by DHCP when running IPCONFIG. I dont suppose theres any way of increasing the timeout? Thanks. 2011-04-11 17:26:31, Info [0x0b0022] WDS StartNetworking: Trying to start networking. 2011-04-11 17:26:31, Info WDS Network service dhcp not running or could not be queried: 264d00 1 1 2011-04-11 17:26:31, Info WDS Network service lmhosts not running or could not be queried: 264e18 1 1 2011-04-11 17:26:31, Info WDS Network service lanmanworkstation not running or could not be queried: 264d00 1 1 2011-04-11 17:26:31, Info WDS Network service bfe not running or could not be queried: 264e18 1 1 2011-04-11 17:26:31, Info WDS Network service ikeext not running or could not be queried: 264d00 1 1 2011-04-11 17:26:31, Info WDS Network service mpssvc not running or could not be queried: 264e18 1 1 2011-04-11 17:27:24, Info WDS Installing device pci\ven_14e4&dev_1691&subsys_04aa1028 X:\WINDOWS\INF\oem37.inf succeeded 2011-04-11 17:27:25, Info WDS No computer name specified, generating a random name. 2011-04-11 17:27:25, Info WDS Renaming computer to MININT-VN2P876. 2011-04-11 17:27:25, Info WDS Acquired profiling mutex 2011-04-11 17:27:25, Info WDS Service winmgmt disable: 0x00000000 2011-04-11 17:27:25, Info WDS Service winmgmt stop: 0x00000000 2011-04-11 17:27:25, Info WDS Service winmgmt enable: 0x00000000 2011-04-11 17:27:25, Info WDS Released profiling mutex 2011-04-11 17:27:25, Info WDS Acquired profiling mutex 2011-04-11 17:27:25, Info WDS Install MS_MSCLIENT: 0x0004a020 2011-04-11 17:27:25, Info WDS Install MS_NETBIOS: 0x0004a020 2011-04-11 17:27:25, Info WDS Install MS_SMB: 0x0004a020 2011-04-11 17:27:25, Info WDS Install MS_TCPIP6: 0x0004a020 2011-04-11 17:27:26, Info WDS Install MS_TCPIP: 0x0004a020 2011-04-11 17:27:26, Info WDS Service dhcp start: 0x00000000 2011-04-11 17:27:26, Info WDS Service lmhosts start: 0x00000000 2011-04-11 17:27:26, Info WDS Service ikeext start: 0x00000000 2011-04-11 17:27:26, Info WDS Service mpssvc start: 0x00000000 2011-04-11 17:27:26, Info WDS Released profiling mutex 2011-04-11 17:27:26, Info WDS Spent 967ms installing network components 2011-04-11 17:27:28, Info WDS Spent 2247ms installing network drivers 2011-04-11 17:27:38, Info WDS QueryAdapterStatus: no operational adapters found. 2011-04-11 17:27:38, Info WDS Spent 10140ms confirming network initialization; status 0x80004005 2011-04-11 17:27:38, Info WDS WaitForNetworkToInitialize failed; ignoring error 2011-04-11 17:27:38, Info WDS GetNetworkingInfo: WpeNetworkStatus returned [0x0]. Flags set: 2011-04-11 17:27:38, Error [0x0b003f] WDS StartNetworking: Failed to start networking. Error code [0x800704C6].[gle=0x000000cb] 2011-04-11 17:27:38, Info [0x0640ae] IBSLIB PublishMessage: Publishing message [WdsClient: An error occurred while obtaining an IP address from the DHCP server. Please check to ensure that there is an operational DHCP server on this network segment.]

    Read the article

  • Why do GPUs overheat?

    - by JAD
    About a year ago, I added a 9800GT (1 GB version) and a Corsair CX500 PSU to an HP M8000N computer. A few weeks ago, the HDD overheated and I decided to transfer the GPU & PSU to a new build, which consists of: i3 @ 3.3Ghz Gigabyte H61 Micro ATX Mobo 4GB RAM 500GB WD HDD DVD RW Drive Cooler Master Elite 430 Tower Once I had Win7 up and running, I installed all the essential drivers that came with the Gigabyte Mobo CD. However, whenever I tried installing the Graphics Media Accelerator driver, the computer would crash and enter an endless boot sequence on the next startup. I skipped installing this driver and installed the CD driver for the 9800GT, which by now is a year old. Everything was working fine, WEI rated my GPU at 6.6 graphics & aero performance. However, after updating my Nvidia drivers to the latest, the WEI dropped my rating to 3.3 for Aero, and 4.7 for graphics performance. Just to make sure that everything was ok, I ran Bad Company 2 on medium settings. The first few minutes ran just fine at a smooth framerate, so I dismissed this as Windows being Windows. About 6 hours later, I ran BC2 again. This time I averaged anywhere from 2-5 FPS. I checked the GPU temperature through GPU-Z, and it came back as 120C. The problem with this, is that the computer was on for six hours up to that point. Wouldn't the card have experienced a reactor core meltdown a lot sooner than that? Granted, the computer was "sleeping" some of the time, but still... The next day I took out a temperature gun and ran some tests. I would point the laser at a very specific area on the reverse side of the card (not the fan or "front"), and compare the temp reading with GPU-Z. After leaving the system on idle on idle for a few minutes, I ran BC2 twice. Here are the results: GPU-Z Reading / Temp Gun Reading / Time Null / 22.3°C / Comp is Off 53°C / 33.5°C / 1:49 78°C / 46°C / 1:53 - (First BC2 run; good framerate) 102°C / 64.6°C / 2:01 - (System is again on idle) 113°C / 64.8°C / 2:10 119°C / 71.8°C / 2:17 - (Second BC2 run; poor framerate) I should also mention that I also took a temp recording of another part of the GPU from 2:01-2:17. The temp in this area jumped from 75°C to 82.9°C in that time frame. This pretty much confirms that GPU-Z is reporting the temperature accurately, and the card is overheating. But I'd like to know why; the cars is doing nothing and still the temperature climbs at a steady rate. I thoroughly cleaned the GPU and PSU when I salvaged them from the old HP M8000N computer with a can of compressed air, dust cant be the issue. Similarly, the rest of the computer is brand new. I installed various Nvidia drivers, but no luck. It seems strange to me that a year-old card is suddenly failing on me; aren't they supposed to last at least two years? Could this be a driver issue? Is the motherboard faulty? Could the PSU be overfeeding the card on voltage? Neither case seems likely, as the CPU, RAM and otherwise the rest of the comp has worked flawlessly and has stayed well within respectable temp ranges (the i3 lingers around 50C, the HDD stays at 30C, so does the PSU). How can I pinpoint the issue?

    Read the article

  • Linux bcm43224 wifi adapter slows down a couple minutes after boot

    - by Blubber
    I just installed Ubuntu on my mid 2012 MacBook Air. Everything worked out of the box, but the wifi is showing some weird behavior. When I first login it's really fast, loading google.com is near instant, and browsing in general feels at least as smooth as it did on Mac OS. However, after a couple minutes the connection slows down dramatically, sometimes it takes over 5s to load google.com, a simple reboot fixes the problem for another couple minutes. Specs: Wifi: 02:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01) Driver: open-source brcmsmac driver Kernel: Linux wega 3.8.0-21-generic #32-Ubuntu SMP Tue May 14 22:16:46 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Distro: Ubuntu 13.04 (uptodate) I tried a number of things, none of which actually helped Use proprietary sta driver from broadcom Installed firmware into /lib/firmware/brcms (which, as far as I can tell from logs, does not get loaded at all) Switch router to only use 2.4 OR 5 GHz Set router to only use a OR g OR n Set router to use AES encryption only Turned off power management on the adapter Set regulatory region to the correct value (NL) on both router and laptop Disable ipv6 Nothing seems to help, the slowdown always occurs. I did notice that the latency (ping google.com) stays roughly the same (around 9ms). Below is some more information that might be of use. $ lspci -nnk | grep -iA2 net 02:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01) Subsystem: Apple Inc. Device [106b:00e9] Kernel driver in use: bcma-pci-bridge $ rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no $ lsmod Module Size Used by dm_crypt 22820 1 arc4 12615 2 brcmsmac 550698 0 coretemp 13355 0 kvm_intel 132891 0 parport_pc 28152 0 kvm 443165 1 kvm_intel ppdev 17073 0 cordic 12574 1 brcmsmac brcmutil 14755 1 brcmsmac mac80211 606457 1 brcmsmac cfg80211 510937 2 brcmsmac,mac80211 bnep 18036 2 rfcomm 42641 12 joydev 17377 0 applesmc 19353 0 input_polldev 13896 1 applesmc snd_hda_codec_hdmi 36913 1 microcode 22881 0 snd_hda_codec_cirrus 23829 1 nls_iso8859_1 12713 1 uvcvideo 80847 0 btusb 22474 0 snd_hda_intel 39619 3 videobuf2_vmalloc 13056 1 uvcvideo snd_hda_codec 136453 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_cirrus bcm5974 17347 0 bluetooth 228619 22 bnep,btusb,rfcomm snd_hwdep 13602 1 snd_hda_codec lpc_ich 17061 0 videobuf2_memops 13202 1 videobuf2_vmalloc videobuf2_core 40513 1 uvcvideo videodev 129260 2 uvcvideo,videobuf2_core bcma 41051 1 brcmsmac snd_pcm 97451 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel snd_page_alloc 18710 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30180 1 snd_seq_midi snd_seq 61554 2 snd_seq_midi_event,snd_seq_midi snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi snd_timer 29425 2 snd_pcm,snd_seq snd 68876 16 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_hda_codec_cirrus mei 41158 0 soundcore 12680 1 snd apple_bl 13673 0 mac_hid 13205 0 lp 17759 0 parport 46345 3 lp,ppdev,parport_pc usb_storage 57204 0 hid_apple 13237 0 hid_generic 12540 0 ghash_clmulni_intel 13259 0 aesni_intel 55399 399 aes_x86_64 17255 1 aesni_intel xts 12885 1 aesni_intel lrw 13257 1 aesni_intel gf128mul 14951 2 lrw,xts ablk_helper 13597 1 aesni_intel cryptd 20373 4 ghash_clmulni_intel,aesni_intel,ablk_helper i915 600351 3 ahci 25731 3 libahci 31364 1 ahci video 19390 1 i915 i2c_algo_bit 13413 1 i915 drm_kms_helper 49394 1 i915 usbhid 47074 0 drm 286313 4 i915,drm_kms_helper hid 101002 3 hid_generic,usbhid,hid_apple $ dmesg | egrep 'b43|bcma|brcm|[F]irm' [ 0.055025] [Firmware Bug]: ioapic 2 has no mapping iommu, interrupt remapping will be disabled [ 0.152336] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 2.187681] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-99] only partially covers this bridge [ 12.553600] bcma-pci-bridge 0000:02:00.0: enabling device (0000 -> 0002) [ 12.553657] bcma: bus0: Found chip with id 0xA8D8, rev 0x01 and package 0x08 [ 12.553688] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0) [ 12.553715] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0) [ 12.553764] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0) [ 12.605777] bcma: bus0: Bus registered [ 12.852925] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 17 [ 13.085176] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 13.085186] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement) [ 20.862617] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated [ 20.862622] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement) [ 20.862625] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 20.897957] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) $ iwconfig lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"wlan" Mode:Managed Frequency:5.22 GHz Access Point: E0:46:9A:4E:63:9A Bit Rate=65 Mb/s Tx-Power=17 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=63/70 Signal level=-47 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:13 Invalid misc:56 Missed beacon:0

    Read the article

  • Performing mechanical movements using computer

    - by Vi
    How to make a computer (in particular, my laptop) to perform some mechanical movements without buying anything $5, soldering things inside computer or creating big sophisticated circuits? Traditionally CD-ROM tray is used to make computer do some movement IRL by, for example, SSH command, but in laptop tray is one-shot (unless manually reloaded) and also not very comfortable [mis]usage. Some assistance circuits can be in use too, but not complex. For example, there is a little motor that can work on USB power. Devices in my computer: DVD-ROM tray: one-time push. USB power: continuous power to the motor or LEDS or relay that turns on something powerful. Audio card. 3 outputs (modprobe alsa model=test can set Mic and Line-in as additional output). One controllable DC output (microphone) that can power up LED and some electronic (may be even mechanic?) relay. Also with sophisticated additional circuiting can control a lot of devices with a good precision. Both input and output support. Probably the most useful object in computer for radio ham. Modem. Don't know about this much, it doesn't work because of hsfmodem crashes kernel if memory is = 1GB. May be it's "pick up" and "hang up" can turn on and off power taken from USB port? Video card. VGA port? S-Video port? Will them be useful? Backlight. Tunable, but probably unuseful. CardBus (or some) slot. Nothing interesting for the task probably (is it?). AC adapter and battery. Probably nothing programmable here. /* My AC adapter already have additional jacks to connect extra devics */ Keyboard. No use. Touchpad. Good sensor (synclient -m 1), but no output. Various LEDs inside laptop. Probably too weak and requires soldering. Fans inside laptop. Poor control over them, requires soldering and dangerous to tinker. HDD (internal and external) that can be spin down and up (hdparm -Y, cat /dev/ubb). But connecting anything serially with it's power line makes HDD underpowered... And too complex. Is something are missed? Any ideas how to use described components? Any other ideas? May be there are easily available /* in developing countries */ cheap devices like "enhanced multimeters" that are controllable from computer and can provide configurable output and measure current and other things? Things to aid pushing many physical buttons with computer. Isn't this a simple idea and implementation and a lot of use in good hands?

    Read the article

  • Set up lnux box for hosting a-z

    - by microchasm
    I am in the process of reinstalling the OS on a machine that will be used to host a couple of apps for our business. The apps will be local only; access from external clients will be via vpn only. The prior setup used a hosting control panel (Plesk) for most of the admin, and I was looking at using another similar piece of software for the reinstall - but I figured I should finally learn how it all works. I can do most of the things the software would do for me, but am unclear on the symbiosis of it all. This is all an attempt to further distance myself from the land of Configuration Programmer/Programmer, if at all possible. I can't find a full walkthrough anywhere for what I'm looking for, so I thought I'd put up this question, and if people can help me on the way I will edit this with the answers, and document my progress/pitfalls. Hopefully someday this will help someone down the line. The details: CentOS 5.5 x86_64 httpd: Apache/2.2.3 mysql: 5.0.77 (to be upgraded) php: 5.1 (to be upgraded) The requirements: SECURITY!! Secure file transfer Secure client access (SSL Certs and CA) Secure data storage Virtualhosts/multiple subdomains Local email would be nice, but not critical The Steps: Download latest CentOS DVD-iso (torrent worked great for me). Install CentOS: While going through the install, I checked the Server Components option thinking I was going to be using another Plesk-like admin. In hindsight, considering I've decided to try to go my own way, this probably wasn't the best idea. Basic config: Setup users, networking/ip address etc. Yum update/upgrade. Upgrade PHP: To upgrade PHP to the latest version, I had to look to another repo outside CentOS. IUS looks great and I'm happy I found it! cd /tmp #wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm #rpm -Uvh epel-release-1-1.ius.el5.noarch.rpm #wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-4.ius.el5.noarch.rpm #rpm -Uvh ius-release-1-4.ius.el5.noarch.rpm yum list | grep -w \.ius\. [will list all packages available in the IUS repo] rpm -qa | grep php [will list installed packages needed to be removed. the installed packages need to be removed before you can install the IUS packages otherwise there will be conflicts] #yum shell >remove php-gd php-cli php-odbc php-mbstring php-pdo php php-xml php-common php-ldap php-mysql php-imap Setting up Remove Process >install php53 php53-mcrypt php53-mysql php53-cli php53-common php53-ldap php53-imap php53-devel >transaction solve >transaction run Leaving Shell #php -v PHP 5.3.2 (cli) (built: Apr 6 2010 18:13:45) This process removes the old version of PHP and installs the latest. To upgrade mysql: Pretty much the same process as above with PHP #/etc/init.d/mysqld stop [OK] rpm -qa | grep mysql [installed mysql packages] #yum shell >remove mysql mysql-server Setting up Remove Process >install mysql51 mysql51-server mysql51-devel >transaction solve >transaction run Leaving Shell #service mysqld start [OK] #mysql -v Server version: 5.1.42-ius Distributed by The IUS Community Project The above upgrade instructions courtesy of IUS wiki: http://wiki.iuscommunity.org/Doc/ClientUsageGuide Create a chroot jail to hold sftp user via rssh. This will force SCP/SFTP and will circumvent traditional FTP server setup. #cd /tmp #wget http://dag.wieers.com/rpm/packages/rssh/rssh-2.3.2-1.2.el5.rf.x86_64.rpm #rpm -ivh rssh-2.3.2-1.2.el5.rf.x86_64.rpm #useradd -m -d /home/dev -s /usr/bin/rssh dev #passwd dev Edit /etc/rssh.conf to grant access to SFTP to rssh users. #vi /etc/rssh.conf Uncomment line allowscp This allows me to connect to the machine via SFTP protocol in Transmit (my FTP program of choice; I'm sure it's similar with other FTP apps). Above instructions for SFTP appropriated (with appreciation!) from http://www.cyberciti.biz/tips/linux-unix-restrict-shell-access-with-rssh.html And this is where I'm at. I will keep editing this as I make progress. Any tips on how to Configure virtual interfaces/ip based virtual hosts for SSL, setting up a CA, or anything else would be appreciated.

    Read the article

  • Computer makes hissing noise, turns off after few seconds

    - by Kaustubh P
    I have a problem similar to the questions posted here and here. This is my config: Asus M3N78-EM, with AMD Phenom X3 720 2800 Black Edition, 4GB Transcend DDR2 RAM, Nvidia 9400GT. HD is a 160 GB IDE, and a LG IDE DVD-ROM. The power button is a bit off, I have removed the cover of the switch, and the only way it turns on is just giving the "stick" under the cover a gentle press. It turns on sometimes, and at other times, I have to cut-off the power from the PSU, and try again. I will describe my problem in as detail as possible, please bear with me: The problem has started in the last week, a few months after I changed the to the powerswitch arrangement as described above. The PC makes a hissing noise, and I wasn't able to pin-point the noise source, because of the various other fans. At first, removing the HD, rebooting w/o the HD, turning it off, reconnecting and booting made the problem go away. But of late, it doesn't happen. As suggested in the other questions, I tried reducing the load by disconnecting both the IDE drives, and the problem (noise + turn-off) still occurs. I also connected another 80G IDE HD,today morning, adn it still made that noise, and turned off. I also opened up the PSU, but I couldn't see any fault in that, I tried rotating the fan by blowing into the blades, and with my fingers, but the hissing noise didn't come from there. Or maybe the speed wasn't enough to evoke that noise. A few weeks ago: I had cleaned the Cabinet and had repasted the processor and its fan using some thermal paste. Could that be at fault? I also used a vacuum to blow the dust out of the PSU, could the power have been too much, to maybe offset the fan or something? A label on the PSU says it uses a ball-bearing fan. That only leaves me with the Processor fan and the processor itself. I didn't try removing the processor fan and processor from the motherboard, and then turning the PC on, fearing damage. Will doing so cause any damage? What can I do to localize and pin-point the problem? Also, after a few tries, the Computer starts up. Sometimes it turns of within 2 seconds, sometimes after the POST. Once it turned off at the grub. Another time it booted completely and then turned off. The only way to ensure that the PC wont turn off, is if the hissing noise stops. EDIT: I suspect it to be the Processor/Processor fan, owing to the source of noise. All the config, except for the Cabinet, is just over a year old. EDIT2: I also just remembered, that I had set the "On-power resume" to turn on, i.e. If I supply he PC with power, it will turn itself on, w/o me needing to press the switch. I had done that to workaround the faulty power-switch, as noted above. EDIT3: I calculated the power my system needs, from the antec site, and I just arrived at 292W

    Read the article

  • IP Micro-outages, telephone micro-outages, and CATV micro-outages

    - by Michael Graff
    This is a long and complicated question, mostly because it has been going on for 2.5 years without a solution in sight. It also is only one-third computer related, the other two-thirds are cable TV and cable-phone related. Background I have COX Communications for a cable provider, and we get Internet, digital cable TV, and digital phone service through them. The Internet is a SB5101 right now, and has been a DPC2100 and SB5120 in the past. Same results. The phone service is provided through a telephone interface mounted on the outside of the house (not classic VoIP) and the CATV is through a Scientific Atlanta receiver without DVR. I do have a TiVo connected to the CATV box. Symptoms The CATV shows "blocking" -- sometimes very very short duration where a few blocks appear on the screen. Sometimes it lasts long enough that the video "pauses" for 2-5 seconds, and rarely but not unseen the audio also fails. The CATV decoder box shows no correctable (FEC) or uncorrectable errors. That is, all BER counters are zero for the video stream. The Internet shows "micro-outages" where it appears that sent packets are not making it out, but I continue to receive packets from local modems. That is, pings stop coming back, but I continue to see modems broadcast for DHCP, and sometimes they ask more than once. The cable modem shows no errors during this time, but cable modems lie like you would not believe. It is actually possible to unplug the coax from the modem for 20 seconds and it reports NO ERRORS to the provider's tools. The phone service cuts out for 1-3 seconds, infrequently. When this happens, I hear NOTHING (not even comfort noise) and the remote side hears a "click" as if I were getting a call waiting message. However, there is no call incoming, other than the one I'm currently on of course. Things SEEM to happen more frequently when the temperature outside swings from cold to warm, so fall/spring seems worse than summer/winter. All micro-outages occur between once or twice a day (which I could ignore) to 10 times per hour. All SNR, signal levels, noise levels, etc. show very close to optimal when measured. COX's diagnosis This is a continual pain for me. Over the last 2.5 years, they have opened, "fixed" something, and closed the tickets. They close it without confirming that it is indeed better, and when I reopen they cannot do that, but instead they open a new ticket and send yet another low-level tech out to do the same signal tests and report that all is OK. I've finally gotten a line tech who has a clue and is motivated enough to pursue this with me. We have tried things like switching the local nodes over to UPS and generator power, but this does not trigger the noise. We have tried replacing all cabling, the tap outside my house, the modem, the CATV decoder -- all without resolution. Recently they have decided it is both my computer or switch, my TiVo, and my phone that are all broken and causing this issue. My debugging steps I spent the worse day of my TV-watching life yesterday and part of today. I watched live TV without the TiVo. I witnessed blocking, but it did "feel different." and was actually more severe. Some days it is better, some days it is worse, so perhaps this was just a very bad day. Today, I connected the TiVo to my DVD player, and ran two very long movies through it. I saw no blocking at all during nearly 6 hours of video. Suggestions? Does anyone have any suggestions on what to do next? I understand perhaps only the IP side can be addressed here, but it is one of the more limiting debugging options.

    Read the article

  • Application Does Not Start in Windows 7

    - by Jim Fell
    I recently installed a new 60GB SSD as my primary hard drive and re-installed Windows 7 Professional 64-bit. I then installed SSD Fresh from Abelssoft to optimize Windows to run on the SSD. It seemed to install okay, but when I try to run the utility, its splash screen appears briefly before it quietly closes. No errors are displayed; the utility just fails to launch. I have run SSD Fresh on another SSD-equipped Windows 7 Pro x64 computer in the past without any problems. Does anyone know what might be preventing the program from running? I tried running sfc /scannow from the command line (with administrator privileges), shutting down the Spybot Resident, and disabling the firewall and virus scanner. I also tried running the tool as administrator; I even tried reinstalling it, running the installer as administrator. No luck. Every time I try to launch the program the Event Viewer logs this same set of errors: Error 4/2/2012 11:35:44 PM Application Error 1000 (100) Faulting application name: SSDFresh.exe, version: 1.0.0.0, time stamp: 0x4f2a45d8 Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000 Exception code: 0xc0000005 Fault offset: 0x000007ff0016dbba Faulting process id: 0x994 Faulting application start time: 0x01cd11fd9fe978df Faulting application path: C:\Program Files (x86)\SSD Fresh\SSDFresh.exe Faulting module path: unknown Report Id: dfeed551-7df0-11e1-a2c7-002522c47ec0 Error 4/2/2012 11:35:43 PM .NET Runtime 1026 None Application: SSDFresh.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception Info: System.NullReferenceException Stack: at AbBugReporter.BugForm.InitLanguage() at AbBugReporter.BugForm..ctor(AbFlexTrans.LanguageInfo, AbBugReporter.BugReportManager, Boolean) at AbBugReporter.BugReportManager.Show(System.Exception) at SSDFresh.App.App_DispatcherUnhandledException(System.Object, System.Windows.Threading.DispatcherUnhandledExceptionEventArgs) at System.Windows.Threading.Dispatcher.CatchException(System.Exception) at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate) at System.Windows.Threading.Dispatcher.WrappedInvoke(System.Delegate, System.Object, Int32, System.Delegate) at System.Windows.Threading.Dispatcher.InvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32) at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr) at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef) at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame) at System.Windows.Application.RunInternal(System.Windows.Window) at System.Windows.Application.Run() at SSDFresh.App.Main() Error 4/2/2012 11:35:39 PM SideBySide 59 None Activation context generation failed for "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\csc.exe".Error in manifest or policy file "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\csc.exe.Config" on line 0. Invalid Xml syntax. Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None For those who are interested, here is my system configuration: ASRock M3A770DE AM3 AMD 770 ATX AMD Motherboard AMD Athlon II X3 455 Rana 3.3GHz Socket AM3 95W Triple-Core Desktop Processor ADX455WFGMBOX G.SKILL Value Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Model F3-10600CL9D-8GBNT Mushkin Enhanced Chronos Deluxe MKNSSDCR60GB-DX 2.5" 60GB SATA III Synchronous MLC Internal Solid State Drive (SSD) (Primary/Boot HD) Western Digital Caviar Blue RFHWD1600AAJS 160GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive (Secondary HD) Sony Optiarc CD/DVD Burner Black SATA Model AD-7261S-0B LightScribe Support RAIDMAX RX-850AE 850W ATX12V v2.3 / EPS12V SLI Certified CrossFire Ready 80 PLUS GOLD Certified Modular Active PFC Power Supply ASUS HD7850-DC2-2GD5 Radeon HD 7850 2GB 256-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card Asus ML228H 21.5" Full HD LED BackLight LED Monitor Slim Design (x3)

    Read the article

  • Command-line video editing in Linux (cut, join and preview)

    - by sdaau
    I have rather simple editing needs - I need to cut up some videos, maybe insert some PNGs in between them, and join these videos (don't need transitions, effects, etc.). Basically, pitivi would do what I want - except, I use 640x480 30 fps AVI's from a camera, and as soon as I put in over a couple of minutes of that kind of material, pitivi starts freezing on preview, and thus becomes unusable. So, I started looking for a command line tool for Linux; I guess only ffmpeg (command line - Using ffmpeg to cut up video - Super User) and mplayer (Sam - Edit video file with mencoder under linux) are so far candidates, but I cannot find examples of the use I have in mind.   Basically, I'd imagine there's an encoder and player tools (like ffmpeg vs ffplay; or mencoder vs mplayer) - such that, to begin with, the edit sequence could be specified directly on the command line, preferably with frame resolution - a pseudocode would look like: videnctool -compose --file=vid1.avi --start=00:00:30:12 --end=00:01:45:00 --file=vid2.avi --start=00:05:00:00 --end=00:07:12:25 --file=mypicture.png --duration=00:00:02:00 --file=vid3.avi --start=00:02:00:00 --end=00:02:45:10 --output=editedvid.avi ... or, it could have a "playlist" text file, like: vid1.avi 00:00:30:12 00:01:45:00 vid2.avi 00:05:00:00 00:07:12:25 mypicture.png - 00:00:02:00 vid3.avi 00:02:00:00 00:02:45:10 ... so it could be called with videnctool -compose --playlist=playlist.txt --output=editedvid.avi The idea here would be that all of the videos are in the same format - allowing the tool to avoid transcoding, and just do a "raw copy" instead (as in mencoder's copy codec: "-oac copy -ovc copy") - or in lack of that, uncompressed audio/video would be OK (although it would eat a bit of space). In the case of the still image, the tool would use the encoding set by the video files.   The thing is, I can so far see that mencoder and ffmpeg can operate on individual files; e.g. cut a single section from a single file, or join files (mencoder also has Edit Decision Lists (EDL), which can be used to do frame-exact cutting - so you can define multiple cut regions, but it's again attributed to a single file). Which implies I have to work on cutting pieces first from individual files first (each of which would demand own temporary file on disk), and then joining them in a final video file. I would then imagine, that there is a corresponding player tool, which can read the same command line option format / playlist file as the encoding tool - except it will not generate an output file, but instead play the video; e.g. in pseudocode: vidplaytool --playlist=playlist.txt --start=00:01:14 --end=00:03:13 ... and, given there's enough memory, it would generate a low-res video preview in RAM, and play it back in a window, while offering some limited interaction ( like mplayer's keyboard shortcuts for play, pause, rewind, step frame). Of course, I'd imagine the start and end times to refer to the entire playlist, and include any file that may end up in that region in the playlist. Thus, the end result of all this would be: command line operation; no temporary files while doing the editing - and also no temporary files (nor transcoding) when rendering final output... which I myself think would be nice. So, while I think that all of the above may be a bit of a stretch - does there exist anything that would approximate the workflow described above?

    Read the article

  • Intermittent lockups, unable to diagnose in over a year

    - by Magsol
    Here's a real doosie; I may just give my firstborn child to whomever helps me solve this problem. In July 2008, I assembled what would be my desktop computer for graduate school. Here are the specs of the machine I built: Thermaltake 750W PSU Corsair Dominator 2x2GB 240-pin SDRAM Thermaltake Tower Asus P5K Deluxe Motherboard Intel Core 2 Quad Q9300 2.5GHz CPU 2 x GeForce 8600 GT WD Caviar Blue 640GB hard drive CD burner DVD burner Soon thereafter, I ordered a new motherboard (because I was an idiot; that first motherboard supported CrossFire, not SLI), an Asus P5N-D. I was originally running Windows XP SP3. Pretty much right into the start of the fall semester, my desktop would simply lock up after awhile. If my system was largely idling, it would be after 1-3 days. If was gaming, it often happened an hour or two into my gaming session, indicating a link to activity level. Here's where it started getting interesting. I started looking at the system temps. The CPU was warmer than it should have been (~60s C), so I purchased some more efficient cooling compound a way better cooler for it. Now it hardly goes over 40 C. Intel was even kind enough to swap it out for free, just to rule it out. Lockups continued. The graphics cards were also running pretty warm: about 60 C idling. Removing one of them seemed to improve stability a little bit...as in, it wouldn't lock up quite as frequently, but still always eventually locked up. But it didn't matter which card I used or removed, the lockups continued. I reverted back to the original motherboard, the P5K Deluxe. Lockups continued. I purchased an entirely new motherboard, eVGA's nForce 750i. Lockups continued. Ran memtest86+ over and over and over, with no errors. Even RMA'd the memory. Lockups continued. Replaced the PSU with a Corsair 750W PSU. Lockups continued. Tried disconnecting all IDE drives (HDDs are SATA). Lockups continued. Replaced both graphics cards with a single Radeon HD 4980. Average temps are now always around 50 C when idling, 60 C only when gaming. Lockups continued. Throughout the whole ordeal, the system has been upgraded from Windows XP SP3 to Vista 32-bit, to Vista 64-bit, and is now at Windows 7 64-bit. Lockups have occurred at every step along the way (each OS was in place for at least a few months before the next upgrade). Edit: By "upgrade" I mean clean install each time. In addition to those reformats, I have performed many, many other reformats of the system and a reinstall of whatever OS had been previously installed in an attempt to rectify this problem, to no avail./Edit When the system locks up, there's no blue screen, no reboot, no error message of any kind. It simply freezes in place until I hit the reset button. Very, very rarely, once Windows boots back up, the system informs me that Windows has recovered from an error, but it can never find the source aside from some piece of hardware. I've swapped out every component in this computer, and there are more fans in it than I care to count...though for the sake of completeness: top 80mm case fan (out) rear 80mm case fan (out) rear 120mm case fan (out) front 120mm case fan (in) side 250mm case fan (in) giant CPU fan on-board motherboard fan (the eVGA board) triple-fan memory setup (came with the memory) PSU internal fan another 120mm fan I stuck on the underside of the video card to keep hot air from collecting at the bottom of the case I'm truly out of ideas. ANY help at all would be oh-so-very GREATLY appreciated. Thank you!

    Read the article

  • Can I make my drives visible and change their partition type without losing my data?

    - by user165408
    I have made a lot of mistakes and now I cannot see my hard disk nor I can start my operating system on my laptop. All my passwords and important files on my hdd without any backup. I followed this course of action Changed my hard disk partitions to dynamic just for getting 5th partition. (1st mistake) Decreased partitions to 4 again. Backed up operating system from 4th to 3rd partition with Norton Ghost. Booted from a live CD for Windows XP. Formatted 4th partition and moved my all important data from 1st and 2nd partitions to the 4th partition. Deleted 1st and 2nd partitions and got 1 partition from half of empty space. So I have just 3 partitions and empty space between 1st and 2nd partitions. Tried to install Windows 8 to the first partition but it did not allow because it is dynamic. Also it did not allow to install to other partitions. Tried to install Windows XP to the 1st partition but it said if I continue I cannot use other drivers. Therefore I escaped from installing it. Booted from the Windows XP live CD then increased 1st partiton to less than 400mb of empty space. Therefore I thought it will be adjacent but it was shown as 2 partitions. In my computer I see just 3 drivers. Using Norton Ghost I recovered my OS to the 1st partition. (2nd mistake it was on 4th partition originally) Booted from a Windows XP live CD I tried to install bcdedit to the Windows XP live CD but it did not work. Then I tried to install EaseUS Partition Master Home Edition. It was installed with errors then I start it and it showed me an error like there is no hard disk. I looked to my PC and my drivers were not there. Booted from the Norton Ghost CD and it did not show me my drivers either, but before I was able to see them. I checked numbers of partition shown by the Norton Ghost utility and they are still have same numbers so I have to see my drivers but I cannot see them now. My hard disk is shown as extarnal dynamic now so I cannot see any drive in my PC in the live Windows XP. There are two options; first one is import extarnal disk and second one is convert disk to basic. Will they delete my data? I fear booting from CDs like Windows XP live CD, Norton Ghost CD, and the operating system CD/DVD, because they may overwrite a few MB their data to my data. These recover tools are already exist in Windows XP live CD by The Ultimate Boot CD for Windows. Can any of them help me? CompuAppa SwissKnife V3 DBXtract Disk Investigator Fab's AutoBackup 2.0 FileRecovery Floppy Repair Free Undelete Handy Recovery Recovery Manager Restorastion Restorastion Help File by UBCD4Win UnChk Unstoppable Copier Finally How can I make it so that my drives are visible again without losing my data? How can I convert my dynamic partitions to basic without losing my data?

    Read the article

  • Setup access to SAS RAID drives with NTFS partitions on CentOS Machine

    - by Quanano
    We have a Dell Poweredge 2900 system with Adaptec 39320A SCSI CONTROLLER CARD and 4 SAS hard drives attached, with NTFS partitions on them. We installed CentOS on the other raid array with a different controller and it is working fine. We are now trying to access the drives shown above and they are not being shown in /dev as sdb, etc. sda is the drive that we installed centos on and it has sda1, sda2, sda3, etc. The CDROM has been picked up as well. If I scan for scsi devices then the perc and adaptec controllers are both found. sg0 is the CDROM and sg2 is the centos installed, however I think sg1 is the other drive but I cannot see anyway to mount the partitions, as only the drive is listed in /dev. Thanks. EXTRA INFO fdisk -l Disk /dev/sda: 72.7 GB, 72746008576 bytes 255 heads, 63 sectors/track, 8844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x11e3119f Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 8845 70528000 8e Linux LVM Disk /dev/mapper/vg_lal2server-lv_root: 34.4 GB, 34431041536 bytes 255 heads, 63 sectors/track, 4186 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_root doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_swap: 21.1 GB, 21139292160 bytes 255 heads, 63 sectors/track, 2570 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_swap doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_home: 16.6 GB, 16647192576 bytes 255 heads, 63 sectors/track, 2023 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_home doesn't contain a valid partition table These are all from the install hdd not the additional hard drives modprobe a320raid FATAL: Module a320raid not found. lsscsi -v [0:0:0:0] cd/dvd TSSTcorp CDRWDVD TS-H492C DE02 /dev/sr0 dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0] [4:0:10:0] enclosu DP BACKPLANE 1.05 - dir: /sys/bus/scsi/devices/4:0:10:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:0:10/4:0:10:0] [4:2:0:0] disk DELL PERC 5/i 1.03 /dev/sda dir: /sys/bus/scsi/devices/4:2:0:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:2:0/4:2:0:0] . lsmod Module Size Used by fuse 66285 0 des_generic 16604 0 ecb 2209 0 md4 3461 0 nls_utf8 1455 0 cifs 278370 0 autofs4 26888 4 ipt_REJECT 2383 0 ip6t_REJECT 4628 2 nf_conntrack_ipv6 8748 2 nf_defrag_ipv6 12182 1 nf_conntrack_ipv6 xt_state 1492 2 nf_conntrack 79453 2 nf_conntrack_ipv6,xt_state ip6table_filter 2889 1 ip6_tables 19458 1 ip6table_filter ipv6 322029 31 ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6 bnx2 79618 0 ses 6859 0 enclosure 8395 1 ses dcdbas 9219 0 serio_raw 4818 0 sg 30124 0 iTCO_wdt 13662 0 iTCO_vendor_support 3088 1 iTCO_wdt i5000_edac 8867 0 edac_core 46773 3 i5000_edac i5k_amb 5105 0 shpchp 33482 0 ext4 364410 3 mbcache 8144 1 ext4 jbd2 88738 1 ext4 sd_mod 39488 3 crc_t10dif 1541 1 sd_mod sr_mod 16228 0 cdrom 39771 1 sr_mod megaraid_sas 77090 2 aic79xx 129492 0 scsi_transport_spi 26151 1 aic79xx pata_acpi 3701 0 ata_generic 3837 0 ata_piix 22846 0 radeon 1023359 1 ttm 70328 1 radeon drm_kms_helper 33236 1 radeon drm 230675 3 radeon,ttm,drm_kms_helper i2c_algo_bit 5762 1 radeon i2c_core 31276 4 radeon,drm_kms_helper,drm,i2c_algo_bit dm_mirror 14101 0 dm_region_hash 12170 1 dm_mirror dm_log 10122 2 dm_mirror,dm_region_hash dm_mod 81500 11 dm_mirror,dm_log

    Read the article

< Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >