Search Results

Search found 5243 results on 210 pages for 'mirror drivers'.

Page 130/210 | < Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >

• No useful DVB-T card found

  - by Edu

  I am using Ubuntu 12.04 3.2.0-26 kernel and I just added a DVB-T card. I did install the media_build as in (http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers) After that the Restricted Drivers appeared on the screen and I installed the Firmware for DVB Cards. lsusb shows Bus 002 Device 005: ID 048d:9005 Integrated Technology Express, Inc. which is my card. lsmod shows these things regarding dvb dvb_usb_it913x 22173 0 dvb_usb 32369 1 dvb_usb_it913x dvb_core 110010 1 dvb_usb rc_core 26343 2 dvb_usb_it913x,dvb_usb Nevertheless there is no /dev/dvb on my linux and Kaffeine does not find the TV turner. Can anybody help me installing my TV Card? Thanks

  Read the article

• D-Link DWA-125 Wireless network card not working after upgrade from 10.04 to 12.04

  - by dava2788

  I upgraded to Ubuntu 12.04 and now the wireless network card D-Link DWA-125 doesn't work. I have the drivers from the official website, But neither recognized during installation. iwconfig: lo no wireless extensions. vmnet8 no wireless extensions. ra0 Ralink STA Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. vmnet1 no wireless extensions. dava@Dava-Ubuntu:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 006: ID 07d1:3c0d D-Link System DWA-125 Wireless N 150 Adapter(rev.A1) [Ralink RT3070] And the chipset: ralink 2870/3070 (rt3070)

  Read the article

• Canon Pixma MP150 printer stops before the job is done

  - by aserwin

  I have a Canon Pixma MP150. It's old but it still works well. The problem is that since I have been running Ubuntu 12.04 the printer exhibits odd behavior. Usually right at the end of a job, it will stop. The printing is done, but the printer is still "working" and it won't release the paper. If I pull it out and test the printer, it will start over and print the same job. Once I just let it be and about an hour or so later it finished with no problems. My question is, could the be an issue with the printer (it is old) or is it the drivers in Ubuntu? Any advice (or suggestions on debugging) would be greatly appreciated as I print a lot and don't really want to buy a new printer.

  Read the article

• Unable to use Hardware Acceleration for Radeon HD 6490M card

  - by user62004

  I've followed steps in this guide. Here is output of 'vainfo' command: libva: VA-API version 0.32.0 libva: va_getDriverName() returns 0 libva: Trying to open /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so libva: va_openDriver() returns -1 vaInitialize failed with error code -1 (unknown libva error),exit I have Catalyst 12.6 driver installed (from debs). Also I've fixed switchable graphics bug, using this guide (STEP 2). I've tried to add 'LIBVA_DRIVER_NAME=xvba LIBVA_DRIVERS_PATH=/usr/lib/va/drivers' to /etc/environment and rebooted system, but the result was the same. PLEASE HELP! :) Thanks! :]

  Read the article

• No sound on laptop speakers on an Acer Aspire 6920

  - by snewix

  Computer: Acer Aspire 6920 Card: HDA Intel Chip: Realtek ALC889 My problem is that the laptop build-in speakers don't play any sound. When i plug in my headphones the sound works normally, the same goes with external speakers. Those work normally like the headphones. The profile in the Sound settings is Analog two-way Stereo. I am using Ubuntu 12.04. Might trere be any problem with my sound drivers or something similar? Any form of help appreciated.

  Read the article

• Ubuntu 12.04 wallpaper problem when using two monitors

  - by jiomsa

  I am using two monitors, the main resolution is 1920x1080 and the secondary is 1440x900. Everything seems to work fine (with default drivers, fglrx crashes bad), besides windows opening in the wrong monitor (even when the main is set correctly), but now what I am trying to fix is the wallpaper problem, here's an image to explain it easier: http://i.imgur.com/msLRR.jpg It also happens with gradients. The secondary monitor is physically aligned like in the image, lower than the other, the wallpaper on the main screen seems to keep the size of the lower resolution, and then it start at the correct resolution the last part at right. Any way to fix this? I am using Ubuntu 12.04 with Gnome-Shell 3.4.1, the vga is a Radeon HD 6950 UPDATE I went to gnome-tweak-tool and disabled "Have file manager handle the desktop", now it looks ok on both monitors, but I can't have icons on my desktop, so I am still interested in solving it. UPDATE2 Disabling "Have file manager handle the desktop", in gnome-tweak-tool and then re-enabling it seems to work, but has to be done every time you turn on the PC.

  Read the article

• Ubuntu perfomance issues

  - by Pelda

  I have as deafult Win 7 64b. But i get annoyed by some windows stuff so I decided to install ubuntu and learn Linux, because Win 8 is a nightmare. I have my Ubuntu 12.04 64bit installed in 100gb partition of my 1 Tb disc. My problem is that my Ubuntu feel really slower than Win 7 - even though my Win 7 are after some years of usage and they became much slower. And Ubuntu is just installed OS - I just downloaded wine and skype. It takes some time for new window to appear (its not 10 seconds, but its really slower than my windows). Sometimes my donwload get stuck (in basic ubuntu app store) Its just weird to me. I thought its because of some drivers, but I am really new to linux, so I decided to ask some1 before I screw whole system up. Specs: -6gbs of RAM - 3x2gb -3.0 ghz CPU quadcore -graphic card is HD4870 sapphire Please excuse my poor english and my addiction to windows interface. Pelda

  Read the article

• ubuntu 12.10 slow application load upon restart

  - by Adam

  new ubuntu user. after boot (boot is quite fast), opening applications such as firefox, libra, system settings, takes close to 10 seconds to open. after the application is loaded in RAM, the application opens fine. the system feels snappy, quick. when i have two FIREFOX open, unity is snappy in showing me the two windows side by side. but upon bootup, loading the application takes 10 seconds. there is not much hdd activity. fresh install. its the same for system settings and browsing system settings. when system settings is opened for the first time (10 second), and i click for example Color, it will take quite long to open the color settings. hardware: i3 4gb ram radeon 5770 250gb sata gigabyte h55m motherboard i am using ubuntu straight out of the box, no propriety drivers. 64 bit. i have reinstalled OS, and still the same.

  Read the article

• How do I fix this half screen problem?

  - by link1275

  I just installed 12.04, and my entire screen is being displayed entirely on the top half of my screen. The bottom half is always black or some technical garbage from the boot up. To interact with the bottom half of the screen I have to move the mouse over the screen to pull part of the bottom half of the screen on top and vice-versa. Does anyone know how to fix this? Also my computer told me, at startup, to go to here: http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware.

  Read the article

• Ubuntu 12.04 GNOME Terminal (3.4.1.1) Xorg 100% CPU

  - by EaZ

  after upgrading Ubuntu 11.04 to 12.04 (x64 arch) maximizing or resizing GNOME Terminal (3.4.1.1) windows larger cause the Xorg (1.11.3) or X process to utilize 100% CPU. Resizing smaller, moving windows or minimizing do not seem to have the same impact but by no means are snappy either. I'm running on a Dell E6500 laptop (upgraded from 11.04) running the nvidia proprietary drivers v. 295.49 (Quadro NVS 160M) with compiz 0.9.7.8. Other terminals such as xterm/uxterm are unaffected. Hoping it has to do with some configuration settings but not sure where to look (nvidia/compiz/gnome/X?). Thanks!

  Read the article

• Need to run `nvidia-xconfig` before booting

  - by RobinJ

  I formatted my whole hard drive, and installed Elementary OS (Ubuntu 10.10) on it in an attempt to get rid of all the problems. It failed. Every since I installed the nvidia-current drivers I first need to boot into recovery mode, and run sudo nvidia-xconfig before booting the system in the normal way. If I don't do this, it will just stop at a black screen after the boot screen, responding to nothing but CTRL+ALT+DELETE and the power button. When I boot the system after running the nvidia-xconfig command I can just start working as usual. Update I suspect it's got something to do with Plymouth. I shall have to try it again before I can confirm it, but removing the quiet and splash parameters from the kernel line in /boot/grub/grub.cfg seems to help. But still, I like my Plymouth screen. A black screen with text rolling over it (or without the text) doesn't attract me much.

  Read the article

• Perform Better with Microsoft Project 2007 and Visio 2007. Now 20% OFF!

  To increase productivity, it is essential that your employees have easy access to productivity tools that make the best use of their resources. Microsoft Office Project 2007 and Microsoft Visio 2007 now work Better Together by: · Reducing repetitive tasks with diagrams that refresh automatically with Data Refresh and Data Connect · Tracking the source of issues quickly with the Track Drivers feature · Tracking budgets with the new Costs Resources field · Building ready-to-use reports with the Visual reports engine · Share and manage documents on collaborative workspaces with Windows SharePoint Services For a limited time, you can now license Microsoft Office Project 2007 system and Microsoft Office Visio 2007 system under the No Better Time offer at a 20% discount for Open Value and a 15% discount for Desktop SKUs. Hurry, there’s No Better Time for you to buy Microsoft Office Project 2007 and Microsoft Office Visio 2007. Click here to view the Terms and Conditions. span.fullpost {display:none;}

  Read the article

• Unwittingly activate wrong wireless driver and now cannot activate the correct one

  - by Sumeth Chaochuti

  I just installed Kubuntu 10.10 on my MacBook 3,1 and found no wireless connection. Using KPackageKit I activated Broadcom b43 because it had already been selected for me. When I subsequently tried to activate Broadcom STA, however, I was returned with an error. After reading Jockey log I removed the wrong driver and reinstalled all drivers so that I can activate the correct one. It hasn't work even though KPackageKit now shows that I have installed: bcmwl-kernel-source bcmwl-modaliases broadcom-sta-common broadcom-sta-source According to the log it appears as if there are conflicts but I don't know how to rectify it. I'm completely new to the platform, just started using Kubuntu 2 days ago. I'll appreciate any advice anyone can give. Thanks.

  Read the article

• How to fix "The system is running in low-graphics mode" error?

  - by jokerdino

  Note: This is an attempt to create a canonical question that covers all instances of "low-graphics mode" error that occurs to a user, including but not limited to installation of wrong drivers, incorrect or invalid lightdm greeters, low disk space, incorrect installation of graphics card like ATI and Nvidia, incorrect configuration of xorg.conf file while setting up multiple monitors among others. If you are experiencing the "low-graphics mode" error when trying to login but none of the following answers work for you, please do ask a new question and then update the answers of this canonical question as and when your new question gets answered. When I try to boot into my computer, I am getting this error: The system is running in low-graphics mode Your screen, graphics cards, and input device settings could not be detected correctly. You will need to configure these yourself. How do I fix the failsafe X mode and login into my computer? Answer index: The greeter is invalid

  Read the article

• screen flickering

  - by lilicus

  When using some applications (LibreOffice, Chrome) it happens that screen flicker (just for a second, or even less than a second) or screen turns into black and then back to normal again... it all happens very fast (usually when clicking with the mouse)... for example, I was searching something in google chrome and list of possible results appeared - when I double click on the search text area (not list of possible results) screen flicker... or when changing border lines in LibreOffice Calc... I managed to create screen shot while using LibreOffice Calc. I am using Nvidia 313 drivers-updates on Ubuntu 13.04. What could be the problem?

  Read the article

• Ubuntu 12.04 I'm trying to ugrade my Geforce 8400 to Geforce GTX 560, getting a black screen

  - by Stuart Anderson

  I have an NVidia Geforce 8400 which is working fine in Ubuntu 12.04. I have just purchased an NVidia GeForce GTX 560 and have been trying to install it. No matter what I do all I get is a black screen on boot up. I have tried; 1/ Additional Drivers, driver version 295.40, this works for the GeForce 8400 but gives me a black screen with the GTX 560 when I boot. 2/ Downloaded driver version 295.40 from NVidias site, was able to install it successfully, it works with my 8400 but gives me a black screen with the GTX 560 when I boot. Are there any options I can try?

  Read the article

• Macbook 8.1 overheating

  - by timse201

  I have a macbook 8.1 with ubuntu 12.04 installed. But my cpu is getting very hot. On Mac my CPU is 50-60°C warm. But on ubuntu my mac is getting very hot and is by about 60°C but with min 3000rpm instead of 2000 on mac and the fan is getting very loud with 4500rpm on ubuntu when im browsing (without flash) or doing something else. i set it to 3000rpm because it is not getting so noisy instead of 2000rpm minimum. But thats not that what im expected. What ive done: i installed lm-sensors to see the temperatures and started the sensors-detect i installed macfancld, jupiter, the newest drivers from x-updates and installed the i965-va-driver oh and i installed mesa - with the default version my sandbridge was displayed as unknown i added GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi=force drm.vblankoffdelay=1 pcie_aspm=force drm.vblankoffdelay=1 i915.semaphores=1 i915.i915_enable_rc6=1 i915.i915_enable_fbc=1" ive added rfkill block bluetooth to /etc/rc.local to switch of bluetooth by default on boot my mac is not as noisy as before but it is noisy and sometimes very hot i hope you can help me

  Read the article

• Broadcom brcm80211 installation from source

  - by calmpitbull

  Hello need help to get my wifi chipset working.I have brcmsmac driver and i would like to have brcm80211 chipset up and running. I have tried everything but nothing helped? git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git Copy brcm/bcm43xx-0.fw and brcm/bcm43xx_hdr-0.fw to /lib/firmware/brcm (or wherever firmware is normally installed on your system). still got brcmsmac ?? then i tryed git clone git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git git clone git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git cd ~/linux-next/drivers/staging/brcm80211 nano Makefile the problem is that there is no brcm82011 folder?? do i follow cd ~/linux-next-a694cb1 like the link sad? i have Broadcom Corporation BCM4313 [14e4:4727]

  Read the article

• How do I set a custom resolution in 12.04 with a nVidia video card (9600 GSO)?

  - by Aaron Agarunov

  I have 32 bit 12.04 and my video card drivers are up to date at "304.64" yet my resolution appears capped at 1920x1080. I am trying to get the resolution to 2560x1440 or even higher, as I am running this machine on a 42" LCD through HDMI and the 1920x1080 resolution will not stretch to fit the screen and is therefore fairly zoomed in. The 9600 GSO supports up to 2560x1600, so this should be no problem for the card itself. I have tried using xrandr, which successfully creates the 2560x1440 60 hertz mode but does not allow me to --addmode or --output it in. I have tried working with the xorg.conf, but I actually can not find a way to create the file since when I try to, I am given an error message stating that the # of monitors I have does not match the # of screens I have. Can anyone provide some help or insight?

  Read the article

• Fatal Error when booting

  - by Denja

  I'm running Ubuntu 10.10 with ATI proprietary FGLRX graphic drivers When I boot, I can see this very quick message appearing; I don't have time to read it: **Fatal Error ..................................**(&@something i cant read) I searched through the log file in /var/log/ in order to find what is wrong and I did find something in the /var/log/Xorg.1.log: 21:31:08 [ 15.734] (--) using VT number 1 [ 204.647] Fatal server error: [ 204.647] xf86OpenConsole: VT_WAITACTIVE failed: Interrupted system call [ 204.647] [ 204.647] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 204.647] Please also check the log file at "/var/log/Xorg.1.log" for additional information. [ 204.647] But this is already Xorg.1.log. And there is a Xorg.0.log also & Xorg.0.log.old but it doesnt have any error in it. My system seems to work properly and it seems its not affected by this But how do I correct this message? Any suggestions?

  Read the article

• "Adding Printer" dialog asks for root password?

  - by NES

  I try to setup my printer under Ubuntu. So far it worked that i succeed to install the drivers. But Ubuntu says: No driver available for this model. This is the problem that Ubuntu doesn't recognize the right model, so i have to add and the choose the right driver manually. No problem i thought. But when i try to add a printer, i'm prompted to provide a root password althought i didn't setup one? So i'mnot able to confirm the dialog and add my printer, what's the reason?

  Read the article

• Log in sound is playing, but no sound during gnome desktop session.What's the problem?

  - by user14376

  When i installed ubuntu, everything was great. But one day, i heard the login sound but no sound on the desktop session. This happens every time. I have reinstalled sound drivers several times, checked speakers are not mute, checked alsamixer, saw all the troubleshooting tips on the net, checked user privileges too but of no help. anyone knows the answer? Please help!!!!! I have ubuntu 10.4LTS and alc662 sound chip. My computer is detecting the sound card and no problems with my speakers.This maybe a bug but i cannot report as i don't know if this will repeat(I atleast have to solve the problem first).

  Read the article

• Dell Inspiron 1210 mini Blank Screen on boot 12.04

  - by jrod

  Dell Inspiron 1210 mini Blank Screen on boot 12.04 If I mash buttons I get to a gray screen then the login screen and into the desktop but normally I turn on the laptop and I see a black screen with a cursor then a purple screen then it just goes black. I can hit ctrl alt F1 or F2 and get a prompt. I've tried using the poulsbo ppa driver script fix but that doesn't work. I don't knwo what to do now. I have the OS installed and when I did get into the OS by mashing buttons I installed updates and wireless adapter drivers. It works but if I reboot I jsut get to the black screen and have no idea what to do. What needs to be done so that I can just boot up and see the login screen!?

  Read the article

• 12.04 hangs on shutdown/reboot

  - by Wharf Rat

  I'm having the same problem noted here, and when I tried the first fix I found that my /etc/default/grub was empty. I'm willing to try this solution, but I don't know how to remove those drivers. In addition, I'd like my graphics card to be running at optimum efficiency. For now, sudo reboot and sudo shutdown -h nowseem to be working (others have reported that they may only work temporarily), but I don't wish to open a terminal and type my password every time I want to turn my laptop off. What to do?

  Read the article

• Installing driver for Ralink Realtek 8187 WiFi adapter

  - by capcom

  I purchased a WiFi adapter online, and it came with an installation CD with drivers. I installed it just fine on Windows, and am now trying on Ubuntu 10.10. The CD came with the driver files for Linux as well, but I have no idea why they aren't working - my guess is that I don't properly understand what to do with them. I have uploaded the contents of the folder which came with the CD here. There is a README in there, but the instructions under the installation header didn't get me anywhere unfortunately. The Device ID is: Bus 001 Device 002: ID 148f:5370 Ralink Technology, Corp. Thanks.

  Read the article

< Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >