Search Results

Search found 10693 results on 428 pages for 'raw disk'.

Page 130/428 | < Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >

• Sony VAIO is booting directly into Windows without showing grub

  - by Rohan Dhruva

  I bought a new Sony Vaio S series laptop. It uses Insyde H2O BIOS EFI, and trying to install Linux on it is driving me crazy. root@kubuntu:~# parted /dev/sda print Model: ATA Hitachi HTS72756 (scsi) Disk /dev/sda: 640GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 274MB 273MB fat32 EFI system partition hidden 2 274MB 20.8GB 20.6GB ntfs Basic data partition hidden, diag 3 20.8GB 21.1GB 273MB fat32 EFI system partition boot 4 21.1GB 21.3GB 134MB Microsoft reserved partition msftres 5 21.3GB 342GB 320GB ntfs Basic data partition 6 342GB 358GB 16.1GB ext4 Basic data partition 7 358GB 374GB 16.1GB ntfs Basic data partition 8 374GB 640GB 266GB ntfs Basic data partition What is surprising is that there are 2 EFI system partitions on the disk. The sda2 partition is a 20gb recovery partition which loads windows with a basic recovery interface. This is accessible by pressing the "ASSIST" button as opposed to the normal power button. I presume that the sda1 EFI System Partition (ESP) loads into this recovery. The sda3 ESP has more fleshed out entries for Microsoft Windows, which actually goes into Windows 7 (as confirmed by bcdedit.exe on Windows). Ubuntu is installed on sda6, and while installation I chose sda3 as my boot partition. The installer correctly created a sda3/EFI/ubuntu/grubx64.efi application. The real problem: for the life of me, I can't set it to be the default! I tried creating a sda3/startup.nsh which called grubx64.efi, but it didn't help -- on rebooting, the system still boots into windows. I tried using efibootmgr, and that shows as it it worked: root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager root@kubuntu:~# efibootmgr --create --gpt --disk /dev/sda --part 3 --write-signature --label "GRUB2" --loader "\\EFI\\ubuntu\\grubx64.efi" BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 However, on rebooting, as you guessed, the machine rebooted directly back into Windows. The only things I can think of are: The sda1 partition is somehow being used Overwrite /EFI/Boot/bootx64.efi and /EFI/Microsoft/Boot/bootmgfw.efi with grubx64.efi [but this seems really radical]. Can anyone please help me out? Thanks -- any help is greatly appreciated, as this issue is driving me crazy!

  Read the article

• grub2 loopback booting ubuntu server iso

  - by Thermionix

  I've got usb-keys setup to multi-boot different linux images using grub2 loopback. The standard ubuntu release isos boot fine, however when attempting to use the server iso it will fail to install saying 'unable to detect cd-media for installation'. the grub.cfg entry; menuentry "ubuntu-12.04-server-amd64" { set isofile="/boot/ubuntu-12.04-server-amd64.iso" loopback loop $isofile linux (loop)/install/vmlinuz file=$isofile/preseed/ubuntu-server.seed ro noprompt noeject -- initrd (loop)/install/initrd.gz } I've attempted to add the following parameters as the fromiso works for debian images on the key iso-scan/filename=/boot/ubuntu-12.04-server-amd64.iso iso-scan/filename=/dev/disk/by-uuid/2859-44B7/boot/ubuntu-12.04-server-amd64.iso fromiso=/dev/disk/by-uuid/2859-44B7/boot/ubuntu-12.04-server-amd64.iso

  Read the article

• Is it safe to resize root partition?

  - by binW

  My HDD is partitioned into two equal sized partitions. First is being used for Windows and Second for Ubuntu. Everything is working fine. But now I want to remove Windows and use the disk completely for Ubuntu. I can easily boot from live cd and use GParted to delete Windows partition and then expand Ubuntu partition to use the whole hard disk. But I want to know if its safe i.e Will resizing Ubuntu partition change any thing else like the partition UUID or any thing else? Do I need to reinstall grub after resizing the root partition? It would be great if some one who has already done this can give their advice here.

  Read the article

• How to restore Windows 7 MBR without a CD

  - by Brandon Bertelsen

  I have been playing with Ubuntu for a few weeks now, and I'd like to revert my computer back to it's original - factory - defaults. On the computer I have a recovery partition (it's a netbook). I went through the process of recovery and everything seemed fine. However, when I restart the computer I'm presented with grub rescue > Now, my understanding is that when I installed Ubuntu "side by side" it replaced the MBR or something like it, with GRUB. I've read on a slew of forums, that I need to use a Windows Recovery Disk. Here are my issues: a) I don't have a recovery disk, I have a recovery partition - it's a netbook. b) I don't have an external cd drive. What I do have is a USB key that has about 1gb of space on it. Thanks in advance.

  Read the article

• How to list missing partitions?

  - by celebrimbor

  I have installed Ubuntu on one of my partition and Crunchbang on the other partition. As I wanted to make some continuous space, I moved Crunchbang partition and then checked fdisk output which looks like this Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc7996dfa Device Boot Start End Blocks Id System /dev/sda1 * 63 80324 40131 de Dell Utility /dev/sda4 81918 625139711 312528897 f W95 Ext'd (LBA) /dev/sda5 81920 211816447 105867264 83 Linux /dev/sda6 299100160 341043199 20971520 83 Linux /dev/sda7 341045248 625139711 142047232 7 HPFS/NTFS/exFAT I cannot see sda2 and sda3 partition. How to find them?

  Read the article

• Is it true that first versions of C compilers ran for dozens of minutes and required swapping floppy disks between stages?

  - by sharptooth

  Inspired by this question. I heard that some very very early versions of C compilers for personal computers (I guess it's around 1980) resided on two or three floppy disks and so in order to compile a program one had to first insert the disk with "first pass", run the "first pass", then change to the disk with "second pass", run that, then do the same for the "third pass". Each pass ran for dozens of minutes so the developer lost lots of time in case of even a typo. How realistic is that claim? What were actual figures and details?

  Read the article

• USB3 boot device disappears post-grub

  - by JoBu1324

  I have an installation of Ubuntu 12.10 on a USB3 device, and it occasionally disappears during boot, dropping me into busybox. This is what I've been able to figure out so far: During a single boot, the following happened: At the grub2 menu, I typed c and dropped to the grub> prompt I typed ls -l and got a list of all the devices, including partitions and UUIDs - the USB3 partitions were available I escaped back to the boot select menu, selected the default item (ubuntu) and hit enter The screen went black for a second before turning into the purple Ubuntu boot screen with the dots (which usually indicates that the boot will fail. When all is well I don't get the black screen) The boot dropped into BusyBox v1.19.3 with the message `ALERT! /dev/disk/by-uuid/[uuid] does not exist blkid displays all of the partitions except those of the USB3 device, as does ls /dev/disk/by-uuid or any of the alternatives.

  Read the article

• Got back Hibernation option, but cannot resume from Hibernate

  - by harisibrahimkv

  In my Ubuntu 12.04, the hibernation option was working well and fine. However, I installed Debian on another partition recently and when I again tried to boot to Ubuntu, I got a message on the boot splash screen saying : The disk drive for / is not ready yet or not present. Continue to wait; or press s to skip mounting or M for manual recovery. After logging into Ubuntu, I find that my hibernation option has gone missing. Is there anyway to recover the hibernation option? EDIT: I solved the disk drive problem and I got the hibernation option back. When I did "sudo pm-hibernate", my system went to hibernation. However, when powering on again, it booted up normally and thus there was no effect of hibernation. How can this be rectified? EDIT1: System - Lenovo ideapad s10-2. EDIT2: /etc/fstab

  Read the article

• monitor screen dead.....not even shows bios screen

  - by megatronous

  Re: /host/ubuntu/disks/root.disk does not exist :( ALERT! /host/ubuntu/disks/root.siak does not exist. Dropping to a shell! BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash) (initramfs) alll thought the above problem was solved my issue now is..when i booted my pc again after this solving this to solve the above problem i had pressed e in the grub menu then corrected the partition then after starting i did sudo grub-update then i made some automatic update updates then in next reboot......my screen had gone blank .... and i am not even able to see bios screen....in the start ...the monitior just stays blank..................i have even tried disconnectiong my hard disk but still not able to get the display......solution required ....urgently.....

  Read the article

• ntfsresize volume and size information

  - by antonio

  I am going to resize my sda2 NTFS partition. When gathering info with ntfsresize, I get: ntfsresize --info /dev/sda2 ntfsresize v2013.1.13 (libntfs-3g) Device name : /dev/sda2 NTFS volume version: 3.1 Cluster size : 4096 bytes Current volume size: 21999993344 bytes (22000 MB) Current device size: 23622320128 bytes (23623 MB) Checking filesystem consistency ... Accounting clusters ... Space in use : 10673 MB (48.5%) Collecting resizing constraints ... You might resize at 10672590848 bytes or 10673 MB (freeing 11327 MB). Please make a test run using both the -n and -s options before real resizing! Can you tell me what is the difference between volume and device size? As for device size, 23622320128 bytes / 1000^2 = 23622.3 MB. Why is 23623 MB reported instead of 23622? Note that parted confirms this value: parted /dev/sda2 unit MB p Model: Unknown (unknown) Disk /dev/sda2: 23622MB Sector size (logical/physical): 512B/512B Partition Table: loop Disk Flags: Number Start End Size File system Flags 1 0.00MB 23622MB 23622MB ntfs

  Read the article

• Impossible to install Ubuntu 10.10 dual boot with Windows 7 on new Acer desktop computer

  - by Don Myers

  My brother has a brand new Acer Desktop with Windows 7. I have done many installs (40+) of Ubuntu starting with 8.10, and have never run into this. I've spent three hours trying to do a dual boot install of 10.10. When you get to the place where you normally would choose to install as a dual boot or overwrite the existing information on the hard drive, that block is just blank. Nothing. No choices even to do a manual partition setup. If you try to go on you get the message "No root file system is defined. Please correct this from the partitioning menu." but there is nothing in the partitioning menu. I tried a good 10.04 disc also. Same thing happens with it. I ran a gparted live cd, and it shows the hard drive as sda with 3 partitions on the original. sda1 is a small partition called PQService. sda2 is another small partition called System Reserved, and GParted says it is the boot partition. sda3 is the main partation with the operating system (Windows 7) and all of the empty space. There is a little unallocated space at the very beginning and very end of the hard drive. If I go to places in the Live CD, it shows a 640 gb hard disk called Acer, but it also shows a 640 gb hard disk called system reserved. They are the same disk. There is just one hard drive. If you click properties in the System Reserved 640 gb, it shows all information as unknown. I had to change the boot order in the bios in order to run the live cd. The hard drive instead of being listed as such is listed as Raid:Raid Ready. Something the way this computer is set up is preventing Ubuntu from being able to identify the hard drive partitions at all to do an install, even if you were not doing a dual boot and just wanted to overwrite Windows. Is this a bug that needs reported? This is a major problem for me and my brother, but also for Ubuntu if new users want to Ubuntu and find they cannot install it.

  Read the article

• GPT Not mounting using "normal" GPT mounting techniques 12.04

  - by Roy Markham

  I've got two 2TB drivess: one MBR and the other GPT. sudo blckid /dev/sdb1 returns a blank. gdisk shows: Partition table scan: MBR: protective BSD: not present APM: not present GPT: present Found valid GPT with protective MBR; using GPT. Warning! Secondary partition table overlaps the last partition by 1970 blocks! You will need to delete this partition or resize it in another utility. Disk /dev/sdb: 3907027055 sectors, 1.8 TiB Logical sector size: 512 bytes Disk identifier (GUID): 38A1113D-B5E9-4B69-ABFF-ACB27AFB3DDD Partition table holds up to 128 entries First usable sector is 34, last usable sector is 3907027021 Partitions will be aligned on 8-sector boundaries Total free space is 2014 sectors (1007.0 KiB) Number Start (sector) End (sector) Size Code Name 1 34 262177 128.0 MiB 0C01 Microsoft reserved part 2 264192 3907028991 1.8 TiB 0700 Basic data partition mounting via fstab or -t gives same error when using NTFS or NTFS-3g "NTFS signature is missing" GParted says one partition is overwriting another, yet windows shows no errors at all. The drive is also mounted easily via MacOs (triple boot)

  Read the article

• Autodetect/mount SDCards and run script for them on Linux

  - by Brendan

  Hey Everyone, I'm currently running SME Server, and need to have a script run upon the attachment of SD Cards to my server. The script itself works fine (it copies the contents of the cards), but the automounting and execution of the script is where I'm having issues. The I have a USB hub consisting of 10 USB ports; that shows up as: [root@server ~]# lsusb Bus 004 Device 002: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 055: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 051: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 050: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 001: ID 0000:0000 (The hub is the TERMINUS TECHNOLOGY INC entries) As I cannot plug SD Cards directly into the server; I use a USB to SD card attachement (10 of them) plugged into the hub to read the cards. Upon pluggig the 10 attachments (without cards) into the hub; lsusb yields the following: [root@server ~]# lsusb Bus 004 Device 002: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 073: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 072: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 071: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 070: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 069: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 068: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 067: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 066: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 065: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 064: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 055: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 051: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 050: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 001: ID 0000:0000 As you can see, the readers are the "Gensys Logic, Inc" entries. Plugging in an SD card to a reader doesn't affect lsusb (it reads exactly as above), however my system recognises the cards fine; as indicated by dmesg: Attached scsi generic sg11 at scsi54, channel 0, id 0, lun 0, type 0 USB Mass Storage device found at 73 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 If I manually mount sdd1 (mount /dev/sdd1 /somedirectory/) this works fine. What I'm really after is a solution that automounts each of the cards as they are inputted into the reader; and executes a script for them (this will involve copying their contents to another directory). My problem is that I don't know how to do this; I don't think udev will work as the USB devices don't change; if I could somehow get udev working with /dev/disk/by-path/ however I think this is doable (it seems to keep constant entries). ls /dev/disk returns: pci-0000:00:1d.7-usb-0:4.1.1.1:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0-part1 pci-0000:0b:01.0-scsi-0:0:1:0 pci-0000:0b:01.0-scsi-0:0:1:0-part1 pci-0000:0b:01.0-scsi-0:0:1:0-part2 From above, we can see I have only one card plugged into the reader (pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0-part1). Going mount /dev/disk/by-path/pci-0000\:00\:1d.7-usb-0\:4.4\:1.0-scsi-0\:0\:0\:0-part1 Works and places the card under /media/usbdisk/, however: mount /dev/disk/by-path/pci-0000\:00\:1d.7-usb-0\:4.4\:1.0-scsi-0\:0\:0\:0-part1 slot1/ doesn't work, and returns "mount: can't get address for /dev/disk/by-path/pci-0000" Any ideas and solutions would be great, I've seen the knowledge of a lot of the guys on here before so I'm hopeful someone can help me out. Thanks

  Read the article

• KVM Virtual guest Paused on Reboot

  - by David Hamilton

  I'm running REHL 6 and just installed a Ubuntu Server Guest via KVM set to start at boot. This works correctly and the guest loads, but it loads "paused" and requires that I manually un-pause it. Can someone give me a hint as to how I can I get the Guest OS to actually become active on boot? Here is the libvert dump as requested...Also tried libvert auto-start --- no effect. <domain type='kvm' id='1'> <name>MailServer</name> <uuid>a61dae75-1f5c-d536-718f-3c615d9b4868</uuid> <memory>4194304</memory> <currentMemory>4194304</currentMemory> <vcpu>4</vcpu> <os> <type arch='x86_64' machine='rhel6.0.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='none'/> <source file='/home/MailServer/MailServer-1.img'/> <target dev='hda' bus='ide'/> <alias name='ide0-0-0'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hdc' bus='ide'/> <readonly/> <alias name='ide0-1-0'/> <address type='drive' controller='0' bus='1' unit='0'/> </disk> <controller type='ide' index='0'> <alias name='ide0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:cd:f9:9f'/> <source bridge='br0'/> <target dev='vnet0'/> <model type='virtio'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/1'/> <target port='0'/> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/1'> <source path='/dev/pts/1'/> <target port='0'/> <alias name='serial0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='5900' autoport='yes'/> <sound model='ac97'> <alias name='sound0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </sound> <video> <model type='cirrus' vram='9216' heads='1'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> <seclabel type='dynamic' model='selinux'> <label>system_u:system_r:svirt_t:s0:c211,c271</label> <imagelabel>system_u:object_r:svirt_image_t:s0:c211,c271</imagelabel> </seclabel></domain>

  Read the article

• How to fix 'grub error file not found' when installing 12.04?

  - by Tomasz Grabowski

  i'm trying to install Ubuntu. I don't know if it is important, but i'm trying to install it on external HDD. In the end i have external bootable HDD which only displays: error: file not found grub recovery> From the beginning: I've downloaded ubuntu-12.04-desktop-i386.iso I've used LiLi USB Creator (LinuxLive) to create bootable pendrive from that image I've bootet from it, it works I've clicked "Try ubuntu", it works too. I've used GParted to look over drivers (disks) My primary embedded disk is seen as /dev/sda My attached external disk as /dev/sdb My PenDrive as /dev/sdc I've created partitions on /dev/sdb Fist partition for system (over 200GiB) Second was there already (it's xsf, and i don't want to touch it :P) Third is extended partition, with 1 locital partiton (10GiB) for swap I've started installation i've choose "somethin else" in ... i belive secound screeb then is selected /dev/sdb as boot disk for first partiton of /dev/sdb i set i want ext3 file system, i've check "formattin" checkbox, and mount path set to "/" firs logical partiton set as swap partition After installation finished, i restarted my computer. When i boot from my primary disc it's work ok, my previous operating system - vista - works ok. When i set my BIOS to boot from my external disc, i only get that message: error: file not found grub recovery> I've try to reinstall it, but didn't help... In desperation, i've try to read a bit about that "grub recovery" command-line and experiment a bit... I'm not sure if this has had any point, or if it give you some information (notice, that i don't know what i'm doing :P ) when i've type command: insmod (hd1,1)/boot/grub/linux.mod i've get message: unknown filesystem the same with: insmod (hd1,msdos1)/boot/grub/linux.mod the same with: insmod ext3 but i get no message after command: insmod ext2 ... notice that i really don't know what this command exactly do, but than i thought that maybe if i reinstall ubuntu with ext2 filesystem, it will work. I've done that, but symptoms are the same. I've go back to that Live version of ubuntu, filesystem and basics directories seems to be present on /dev/sdb1 ... i'm completely unfamiliar with GRUB. I'm also don't know which wersion of GRUB it is, i hope there is only one version on ubuntu-12.04-desktop-i386.iso Any help? Thax

  Read the article

• Symlink are using both locations?

  - by Tiago Rossi

  Ive made a research and didnt found any answers, so I decided to ask here. To make you know, the /dev/sda2 disk of my WHM/Cpanel webserver got 100% full. The /var/ folder are the /dev/sda2 and I've found the reason of that isse are the /var/lib/mysql folder. To fix it I need to move the /var/lib/mysql folder from /dev/sda2 to /home/ where I have a lot of space in disk. Then I used the command lines: service mysql stop cp -r -p /var/lib/mysql/ /home/databasesmysql/ mv /var/lib/mysql /var/lib/mysql.backup/ ln -s /home/databasesmysql/ /var/lib/mysql service mysql start Ok, now to check if its running at the new location I just renamed the /var/lib/mysql to /var/lib/mysql.backup and MySQL stopped working. Also when I rename the /home/databasesmysql/ folder MySQL also stop to work. I dont know whats happening, the symlink are using both locations? Thanks very much.

  Read the article

• XmlWriter and lower ASCII characters

  - by Rick Strahl

  Ran into an interesting problem today on my CodePaste.net site: The main RSS and ATOM feeds on the site were broken because one code snippet on the site contained a lower ASCII character (CHR(3)). I don't think this was done on purpose but it was enough to make the feeds fail. After quite a bit of debugging and throwing in a custom error handler into my actual feed generation code that just spit out the raw error instead of running it through the ASP.NET MVC and my own error pipeline I found the actual error. The lovely base exception and error trace I got looked like this: Error: '', hexadecimal value 0x03, is an invalid character. at System.Xml.XmlUtf8RawTextWriter.InvalidXmlChar(Int32 ch, Byte* pDst, Boolean entitize)at System.Xml.XmlUtf8RawTextWriter.WriteElementTextBlock(Char* pSrc, Char* pSrcEnd)at System.Xml.XmlUtf8RawTextWriter.WriteString(String text)at System.Xml.XmlWellFormedWriter.WriteString(String text)at System.Xml.XmlWriter.WriteElementString(String localName, String ns, String value)at System.ServiceModel.Syndication.Rss20FeedFormatter.WriteItemContents(XmlWriter writer, SyndicationItem item, Uri feedBaseUri)at System.ServiceModel.Syndication.Rss20FeedFormatter.WriteItem(XmlWriter writer, SyndicationItem item, Uri feedBaseUri)at System.ServiceModel.Syndication.Rss20FeedFormatter.WriteItems(XmlWriter writer, IEnumerable`1 items, Uri feedBaseUri)at System.ServiceModel.Syndication.Rss20FeedFormatter.WriteFeed(XmlWriter writer)at System.ServiceModel.Syndication.Rss20FeedFormatter.WriteTo(XmlWriter writer)at CodePasteMvc.Controllers.ApiControllerBase.GetFeed(Object instance) in C:\Projects2010\CodePaste\CodePasteMvc\Controllers\ApiControllerBase.cs:line 131 XML doesn't like extended ASCII Characters It turns out the issue is that XML in general does not deal well with lower ASCII characters. According to the XML spec it looks like any characters below 0x09 are invalid. If you generate an XML document in .NET with an embedded &#x3; entity (as mine did to create the error above), you tend to get an XML document error when displaying it in a viewer. For example, here's what the result of my  feed output looks like with the invalid character embedded inside of Chrome which displays RSS feeds as raw XML by default: Other browsers show similar error messages. The nice thing about Chrome is that you can actually view source and jump down to see the line that causes the error which allowed me to track down the actual message that failed. If you create an XML document that contains a 0x03 character the XML writer fails outright with the error: '', hexadecimal value 0x03, is an invalid character. The good news is that this behavior is overridable so XML output can at least be created by using the XmlSettings object when configuring the XmlWriter instance. In my RSS configuration code this looks something like this:MemoryStream ms = new MemoryStream(); var settings = new XmlWriterSettings() { CheckCharacters = false }; XmlWriter writer = XmlWriter.Create(ms,settings); and voila the feed now generates. Now generally this is probably NOT a good idea, because as mentioned above these characters are illegal and if you view a raw XML document you'll get validation errors. Luckily though most RSS feed readers however don't care and happily accept and display the feed correctly, which is good because it got me over an embarrassing hump until I figured out a better solution. How to handle extended Characters? I was glad to get the feed fixed for the time being, but now I was still stuck with an interesting dilemma. CodePaste.net accepts user input for code snippets and those code snippets can contain just about anything. This means that ASP.NET's standard request filtering cannot be applied to this content. The code content displayed is encoded before display so for the HTML end the CHR(3) input is not really an issue. While invisible characters are hardly useful in user input it's not uncommon that odd characters show up in code snippets. You know the old fat fingering that happens when you're in the middle of a coding session and those invisible characters do end up sometimes in code editors and then end up pasted into the HTML textbox for pasting as a Codepaste.net snippet. The question is how to filter this text? Looking back at the XML Charset Spec it looks like all characters below 0x20 (space) except for 0x09 (tab), 0x0A (LF), 0x0D (CR) are illegal. So applying the following filter with a RegEx should work to remove invalid characters:string code = Regex.Replace(item.Code, @"[\u0000-\u0008,\u000B,\u000C,\u000E-\u001F]", ""); Applying this RegEx to the code snippet (and title) eliminates the problems and the feed renders cleanly.© Rick Strahl, West Wind Technologies, 2005-2012Posted in .NET  XML   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• How to access photos from my Genius G-Shot P7545 camera?

  - by Florin

  I have a Genius G-Shot P7545 camera. In Windows I had just to plug in the camera to the usb and acces it like a usb stick. I tried to do that in Ubuntu 10.10 with no result. How can I acces the photots? With these comands I get: lsusb Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 015: ID 0784:1692 Vivitar, Inc. Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xcf5acf5a Device Boot Start End Blocks Id System /dev/sda1 * 1 2550 20478976 83 Linux /dev/sda3 2550 19458 135810048 f W95 Ext'd (LBA) /dev/sda5 2550 19458 135809024 83 Linux Unable to read /dev/sdb

  Read the article

• Unable to install Ubuntu 12.10 on windows 8 machine/ error no5

  - by JOBIN VARGHESE

  installing crashes at halfway of 'copying files' showing an i\o device error error no5; there was problem in beginning of installation too, ubuntu was not detecting the installed windows 8. my system is a dell inspiron 5520 laptop ,with 1 tb WDC hard disk in GPT ,with EFI . my current partition is like 102 mb EFI SYSTEM partition 200 gb Windows 8 ntfs 22 gb root Ext4 8 gb swap 20 db home Ext4 680 gb ntfs Drive for storing all my files. i tried both dvd disc and usb drive, both resulted in same error. inbuild dell hardware diagnosis utility showed both hard disk and dvd drive as healthy what may be the reason and how can i install ubuntu along side my windows 8?

  Read the article

• Windows 7 can't boot with Ubuntu on different hard drive

  - by dellphi

  I use a dual boot with two hard disks and two OS is Ubuntu 10.04 and Windows 7. Windows 7 installed on the first disk, first partition. Grub is installed on a second hard disk MBR, and Ubuntu installed on an extended partition on a second hard drive. When I select Windows 7 on the Grub menu, the HDD lamp lights up briefly and then black screen on the monitor, with the status of the keyboard is still functioning. Until now (with the default boot from first HDD), I have to press F12 to get into the Grub to run Linux on a second HDD. output of fdisk -l grub.cfg. I want to retain Grub to remain on the second HDD, and Windows 7 could choose from the menu provided by Grub. But I do not get how, I hope anyone can help.

  Read the article

• Ubuntu 12.04 Install Problems.. Installation Type screen. No options [closed]

  - by Zaffiro

  Possible Duplicate: Only ‘sdb’ shows up when installing 12.04 on a new Dell inspiron 14z I am new to Linux and trying to install Ubuntu 12.04 on a new HP Pavilion DV6TQE Ivy Bridge and being presented with the below screen which I believe is incorrect. My disk is set up as a basic disk (not dynamic) and I tried with a single C:\ partition and by creating a second partition in windows with no luck. Any ideas? UPDATE: I think I know what the problem is but I don't know how to fix it yet.. My hard drive has a 32gb mSSD cache which is listed as dev/sdb. for some reason this is causing the installation trouble.

  Read the article

• Can't see my partitions after grub recovery

  - by dimbo

  I stupidly inserted the windows CD into my dual boot Ubuntu 11.10 / windows xp system. I just wanted to see if I could install windows on my external usb HD, but didn't actually go ahead with the install. It seems like the windows CD messed up my MBR and I had to use boot-repair and the ubuntu 11.10 live CD to gain access to ubuntu again. It seems to boot up a little differently (slower) but works. However, I now cant see any of my partitions in nautilus (there are 3). When I open gparted, it just shows my whole hard drive as unallocated (I know it has a windows partition that works and my ubuntu partition that I am using now). If I insert a usb pen, it is also not visible in nautilus but in gparted shows up as a FAT32 partition (which is correct although I cannot access it). sudo fdisk -l gives the following : demian@dimbo-TP:~$ sudo fdisk -l [sudo] password for demian: omitting empty partition (5) Disk /dev/sda: 320.1 GB, 320072933376 bytes 240 heads, 63 sectors/track, 41345 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x877b877b Device Boot Start End Blocks Id System /dev/sda1 * 63 63842309 31921123+ 7 HPFS/NTFS/exFAT /dev/sda2 63844350 133484084 34819867+ 5 Extended /dev/sda3 127636488 133484084 2923798+ 82 Linux swap / Solaris /dev/sda4 133484085 625137344 245826630 83 Linux /dev/sda5 63844352 123445247 29800448 83 Linux /dev/sda6 123447296 127635455 2094080 82 Linux swap / Solaris Disk /dev/sdb: 8100 MB, 8100249600 bytes 12 heads, 40 sectors/track, 32960 cylinders, total 15820800 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdb1 * 5992 15820799 7907404 c W95 FAT32 (LBA) Here is my grub.conf file. Like I said before, I had to use the 'boot-repair' utility with the live cd to get grub working again. I think that this utility maybe created a new grub for me because the startup is definitely not the same. The screen goes blank for a while, and then the ubuntu loading dots come up for a brief moment (instead of during the whole startup process) before the dektop is displayed. Anyway : # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=10 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.0.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux /boot/vmlinuz-3.0.0-12-generic root=UUID=5349ff67-b7b7-489f-a881-ae49c1dcd84a ro quiet splash vt.handoff=7 initrd /boot/initrd.img-3.0.0-12-generic } menuentry 'Ubuntu, with Linux 3.0.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a echo 'Loading Linux 3.0.0-12-generic ...' linux /boot/vmlinuz-3.0.0-12-generic root=UUID=5349ff67-b7b7-489f-a881-ae49c1dcd84a ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-12-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Microsoft Windows XP Professional (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 72A89361A89322A1 drivemap -s (hd0) ${root} chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### How can I get things back to normal. Thanks, Demian.

  Read the article

• How can I avoid the random restart of the xserver?

  - by Bernd

  I'm using a desktop pc with 64bit Ubuntu 12.04 (Kernel 3.2.0-24-generic). Hardware specs are - Intel Core i7 CPU 860 @ 2,80GHz x 8 - Nvidia GeForce GTS 250 - 750 GB Hard Disk ATA WDC WD7501AALS-00E3A0 (for my /home partition) - 128 GB Solid-State Disk ATA PLEXTOR PX-128M2S (for all other partitions) Since I reinstalled the PC with Ubuntu 12.04 the xserver restarts randomly. Most times when I watch a video in the browser (maybe a flash issue?) but sometimes the restart/crash appears when I'm working in an text-editor. How can I locate the problem? Which information is needed for a useful answer?

  Read the article

• installed ubuntu 13.04 but no wireless or wired connection available

  - by James

  after having installed ubuntu 13.04 i can not connect to the internet wirelessly or wired? can only connect to internet by using "try ubuntu" via ethernet cable, ive tried seeking help in so many different ways yet getting no positive outcome at all, will someone please explain why i can only connect with ethernet while i have the cd in the tray? ive also tried downloading b43 drivers to connect to the internet but apparently i dont have enough disk space, what is going on here? i have the disk in the tray now at the screen where you can either try or install, if someone could give me a step by step from here it would probably cut out all this hassle of me not knowing whats going on

  Read the article

• Resize Partition with gparted

  - by arian

  I wanted to create more space for Ubuntu on my hard disk in favor of my windows partition. I booted the livecd and resized the ntfs partition to 100gb. Then I wanted to resize my ubuntu (ext4) partition to fill up the created unallocated space. A screenshot of my current disk. (With the livecd there's no 'key' icon after sda6) My first thought was just right click on sda6 ? move/resize ? done. Unfortunately I cannot resize or move the partition. However I can resize the ntfs partition. I guess it is because the extended sda4 partition is locked. I couldn't see an unlock possibility though… So how do I resize the ext4 partition anyway, probably by unlocking the extended partition, but how? Thanks in advance.

  Read the article

< Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >