Search Results

Search found 3411 results on 137 pages for 'timeout expired'.

Page 130/137 | < Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >

• Wireless internet connection connects but internet does not work (no packets received). Wired does.

  - by Rodney

  When I connect my PC via ethernet cable to my ADSL router it works fine. When I connect via Wireless it connects and the internet will work for a random amount of time and then stop working. It stays connected with a strong signal but no packets are received. My laptop/iphone are right next to it and wireless works fine. If I open the Wireless USB status, it says it is connected to my SSID with full strength (54 mps - I am 3 meteres away from my router) and the activty shows as Packets 594 SENT and 105 RECEIVED (this goes up VERY slowly) I have tried the following: Turned off anitvirus and firewall completely. Tested the wifi signal- I am writing this on my laptop which is next to my PC and also has full wifi strength. Tried a different wireless adapter - I dug out an old PCI wireless card - it does the exact same thing. Compared all wireless settings to my laptop. I can ping google.com and it replies (sometimes with packet loss) When I reboot the PC it will connect for a minute or two (random time) and then just stops again. I tried Firefox, IE etc. no joy I have updated all latest versions (Netgear WG111v2) and drivers Checked Event Log - nothing unusual Ping the router (and even connect as admin for the few minutes when the internet does work) Changed the MTU down to 1200 using DrTCP Checked Device Manager for conflicts - none. I ping the router from the PC (192.168.0.10 - 192.168.0.1) and it replies with 4 packets. BUT, on my router admin page (which I access via http on my laptop wirelessly) - if I ping 192.168.0.10 all packets timeout (pinging my laptop 192.168.0.12 works fine) My router admin page shows the leased IP address for 192.168.0.10 (ie it is definitely talking to the router initially) Now I am out of ideas - please help. I think it is an OS/Software issue as I have tried 2 different wireless adapaters (PCI and USB) with the same result but all other wireless devices work fine around mine). It's not the firewall. It is getting assigned an IP address correctly (my PC gets 192.168.0.10, my laptop is .12) It is assigned by DHCP. As soon as I plug in the ethernet cable it all works fine. Repairing the adapter sometimes helps but it will always stop working after a random time. The wireless adapter always shows as connected with Excellent signal but the internet does not work. I am running Windows XP SP3 and have tried a Netgear WG111v2 USB adapter. Thanks in advance! UPDATE: The internet seems to be working, it is just either sending packets too small or slow to work (some small pages load bits of them very slowly but then hang). XP seems to have a networking diagnostic app - here is the output: Last diagnostic run time: 08/30/10 08:16:38 IP Configuration Diagnostic Invalid IP address info Valid IP address detected: 192.168.0.10 IP Layer Diagnostic Corrupted IP routing table info The default route is valid info The loopback route is valid info The local host route is valid info The local subnet route is valid Invalid ARP cache entries action The ARP cache has been flushed Gateway Diagnostic Gateway info The following proxy configuration is being used by IE: Automatically Detect Settings:Disabled Automatic Configuration Script: Proxy Server: Proxy Bypass list: info This computer has the following default gateway entry(ies): 192.168.0.1 info This computer has the following IP address(es): 192.168.0.10 info The default gateway is in the same subnet as this computer info The default gateway entry is a valid unicast address info The default gateway address was resolved via ARP in 1 try(ies) info The default gateway was reached via ICMP Ping in 1 try(ies) info TCP port 80 on host 65.55.12.249 was successfully reached info The Internet host www.microsoft.com was successfully reached info The default gateway is OK DNS Client Diagnostic DNS - Not a home user scenario info Using Web Proxy: no info Resolving name ok for (www.microsoft.com): yes No DNS servers DNS failure HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Passive): Successfully connected to ftp.microsoft.com. info HTTP: Successfully connected to www.microsoft.com. warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out error Could not make an HTTPS connection. info Redirecting user to support call WinSock Diagnostic WinSock status info All base service provider entries are present in the Winsock catalog. info The Winsock Service provider chains are valid. info Provider entry MSAFD Tcpip [TCP/IP] passed the loopback communication test. info Provider entry MSAFD Tcpip [UDP/IP] passed the loopback communication test. info Provider entry RSVP UDP Service Provider passed the loopback communication test. info Provider entry RSVP TCP Service Provider passed the loopback communication test. info Connectivity is valid for all Winsock service providers. Wireless Diagnostic Wireless - Service disabled Wireless - User SSID action User input required: Specify network name or SSID Wireless - First time setup info The Wireless Network name (SSID) to which the user would like to connect = RodSof Wifi. Wireless - Radio off info Valid IP address detected: 192.168.0.10 Wireless - Out of range Wireless - Hardware issue Wireless - Novice user Wireless - Ad-hoc network Wireless - Less preferred Wireless - 802.1x enabled Wireless - Configuration mismatch Wireless - Low SNR Network Adapter Diagnostic Network location detection info Using home Internet connection Network adapter identification info Network connection: Name=Local Area Connection 2, Device=Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC, MediaType=LAN, SubMediaType=LAN info Network connection: Name=Wireless USB, Device=NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter, MediaType=LAN, SubMediaType=WIRELESS info Both Ethernet and Wireless connections available, prompting user for selection action User input required: Select network connection info Wireless connection selected Network adapter status info Network connection status: Connected HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Active): Successfully connected to ftp.microsoft.com. warn HTTP: Error 12007 connecting to www.microsoft.com: The server name or address could not be resolved warn HTTP: Error 12002 connecting to www.hotmail.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out error Could not make an HTTP connection. error Could not make an HTTPS connection.

  Read the article

• Remote host: can tracert, can telnet, can*not* browse: what gives?

  - by MacThePenguin

  One of my customers of the company I work for has made a change to their Internet connection, and now we can't connect to them any more from our LAN. To help me troubleshoot this issue, the network guy on the customer's site has configured their firewall so that a HTTPS connection to their public IP address is open to any IP. I should put https://<customer's IP> in my browser and get a web page. Well, it works from any network I've tried (even from my smartphone), just not from my company's LAN. I thought it may be an issue with our firewall (though I checked its rules and it allows outbound TCP port 443 to anywhere), so I just connected a PC directly to the network connection of our provider, bypassing out firewall completely, and still it didn't work (everything else worked). So I asked for help to our Internet provider's customer service, and they asked me to do a tracert to our customer's IP. The tracert is successful, as the final hop shown in the output is the host I want to reach. So they said there's no problem. :( I also tried telnet <customer's IP> 443 and that works as well: I get a blank page with the cursor blinking (I've tried using another random port and that gives me an error message, as it should). Still, from any browser of any PC in my LAN I can't open that URL. I tried checking the network traffic with Wireshark: I see the packages going through and answers coming back, thought the packets I see passing are far less than they are if I successfully connect to another HTTPS website. See the attached screenshot: I had to blur the IPs, anyway the longer string is my PC's local IP address, the shorter one is the customer's public IP. I don't know what else to try. This is the only IP doing this... Any idea what could I try to find a solution to this issue? Thanks, let me know if you need further details. Edit: when I say "it doesn't work" I mean: the page doesn't open, the browser keeps loading for a long time and eventually shows an error saying that the page cannot be opened. I'm not in my office now so I can't paste the exact message, but it's the usual message you get when the browser reaches its timeout. When I say "it works", I mean the browser loads and shows a webpage (it's the logon page for the customers' firewall admin interface: so there's the firewall brand's logo and there are fields to enter a user id and a password). Update 13/09/2012: tried again to connect to the customer's network through our Internet connection without a firewall. This is what I did: Run a Kubuntu 12.04 live distro on a spare laptop; Updated all the packages I could and installed WireShark; Attached it to my LAN and verified that I couldn't open https://<customer's IP>. Verified that the Wireshark trace for this attempt was the same as the one I've already posted; Verified that I could connect to another customer's host using rdesktop (it worked); Tried to rdesktop to <customer's IP>, here's the output: kubuntu@kubuntu:/etc$ rdesktop <customer's IP> Autoselected keyboard map en-us ERROR: recv: Connection reset by peer Disconnected the laptop from the LAN; Disconnected the firewall from the Extranet connection, connected the laptop instead. Set its network configuration so that I could access the Internet; Verified that I could connect to other websites in http and https and in RDP to other customers' hosts - it all worked as expected; Verified that I could still traceroute to <customer's IP>: I could; Verified that I still couldn't open https://<customer's IP> (same exact result as before); Checked the WireShark trace for this attempt and noticed a different behaviour: I could see packets going out to the customer's IP, but no replies at all; Tried to run rdesktop again, with a slightly different result: kubuntu@kubuntu:/etc/network$ rdesktop <customer's IP> Autoselected keyboard map en-us ERROR: <customer's IP>: unable to connect Finally gave up, put everything back as it was before, turned off the laptop and lost the WireShark traces I had saved. :( I still remember them very well though. :) Can you get anything out of it? Thank you very much. Update 12/09/2012 n.2: I followed the suggestion by MadHatter in the comments. From inside the firewall, this is what I get: user@ubuntu-mantis:~$ openssl s_client -connect <customer's IP>:443 CONNECTED(00000003) If I now type GET / the output pauses for several seconds and then I get: write:errno=104 I'm going to try the same, but bypassing the firewall, as soon as I can. Thanks. Update 12/09/2012 n.3: So, I think ISA Server is altering the results of my tests... I tried installing Wireshark directly on the firewall and monitoring the packets on the Extranet network card. When the destination is the customer's IP, whatever service I try to connect to (HTTPS, RDP or SAProuter), I can only see outbound packets and no response packets whatsoever from their side. It looks like ISA Server is "faking" the remote server's replies, that's why I get a connection using telnet or the openSSL client. This is the wireshark trace from inside our LAN: But this is the trace on the Extranet network card: This makes a bit more sense... I'll send this info to the customer's tech and see if he can make anything out of it. Thanks to all that took the time to read my question and post suggestions. I'll update this post again.

  Read the article

• Resolve Wrong IP from Domain Name only on certain networks

  - by Godric Seer

  I host a personal website on an old desktop that is LAMP based. There are several strange things about this problem so I will break it down into steps. Since I have a dynamic IP, I use no-ip to make sure I have a working domain name at all times. I use the automatic update client, but logged in and checked and my no-ip domain has the proper IP tied to it. Here is a link to the homepage through the no-ip domain for reference. Also, I do a ping and a traceroute on the no-ip domain and get: [eckertzs@localhost ~]$ ping -c 1 endradil.noip.me PING endradil.noip.me (65.24.215.99) 56(84) bytes of data. 64 bytes from endradil.noip.me (65.24.215.99): icmp_seq=1 ttl=64 time=2.23 ms --- endradil.noip.me ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 104ms rtt min/avg/max/mdev = 2.233/2.233/2.233/0.000 ms [eckertzs@localhost ~]$ traceroute endradil.noip.me traceroute to endradil.noip.me (65.24.215.99), 30 hops max, 60 byte packets 1 . (192.168.2.1) 1.755 ms 5.409 ms 5.380 ms 2 endradil.noip.me (65.24.215.99) 6.297 ms 9.543 ms 10.324 ms Using this domain, I can connect to my webserver without issue or interruption(the https is required to avoid a redirect serverside, but it works). I also have a domain I have bought on GoDaddy where I have a CNAME record forwarding the www subdomain to my no-ip domain. CNAME Record Host: www Points to: endradil.noip.me TTL: 1 hour For the past several weeks, I never had an issue using the GoDaddy domain to connect (ssh or https). As of the past few days, however, the GoDaddy domain has only worked intermittently, for a few minutes at a time and then will go down for hours at a time. I get server not found errors most of the time. Also, if I happen to be using the GoDaddy domain for an ssh connection, the connection will freeze. I have run online tests of the DNS and have seen that the website is visible by external servers and resolved to the correct IP. I also contacted GoDaddy support but they had no issues connecting to the website, and therefore did not see any issues. My personal computers (Windows desktop, linux laptop, android phone) all fail to connect when on my personal wifi. If I disconnect my phone from the wifi and use my AT&T wireless data, it can connect with both domains without issue. When I attempt to use Google webmaster tools to crawl the site using the GoDaddy domain, Google can not find the site. From my linux laptop, I have found some interesting results when I ping or traceroute the domain. The results from these: [eckertzs@localhost ~]$ ping -c 1 www.endradil.com PING www.endradil.com.Belkin (198.105.244.228) 56(84) bytes of data. --- www.endradil.com.Belkin ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 10000ms [eckertzs@localhost ~]$ traceroute www.endradil.com traceroute to www.endradil.com (198.105.244.228), 30 hops max, 60 byte packets 1 . (192.168.2.1) 1.918 ms 2.806 ms 2.772 ms 2 cpe-65-24-208-1.insight.res.rr.com (65.24.208.1) 29.247 ms 29.654 ms 30.094 ms 3 cpe-69-23-24-117.new.res.rr.com (69.23.24.117) 15.597 ms 23.218 ms 23.581 ms 4 agg24.clmcohib01r.midwest.rr.com (65.29.1.52) 30.581 ms 30.556 ms 31.192 ms 5 be27.clevohek01r.midwest.rr.com (65.29.1.38) 30.580 ms 31.062 ms 31.038 ms 6 bu-ether25.atlngamq47w-bcr01.tbone.rr.com (107.14.19.38) 37.863 ms 68.844 ms 43.773 ms 7 107.14.17.178 (107.14.17.178) 51.866 ms 51.019 ms 50.989 ms 8 ae0.pr1.dca10.tbone.rr.com (107.14.17.200) 48.467 ms ae-4-0.a0.lax91.tbone.rr.com (66.109.1.113) 49.912 ms * 9 v413.core1.ash1.he.net (209.51.175.33) 60.270 ms 50.842 ms 50.819 ms 10 100ge5-1.core1.nyc4.he.net (184.105.223.166) 55.597 ms 56.045 ms 56.020 ms 11 xerocole-inc.10gigabitethernet12-4.core1.nyc4.he.net (216.66.41.242) 56.001 ms 55.969 ms 55.992 ms 12 * * * both show the incorrect IP. Also, the traceroute timesout on hops 12 through 255 (output truncated above). The traceroute using site24x7 works and shows reasonable results when run from their california server. From another linux box on a different network but in the same city as me (10 miles away), I still get timeout for traceroute, however the IP resolves correctly for the domain. From this I believe that the DNS result is incorrectly cached in either my router/modem or perhaps even at my ISP level. My question is, first, how do I find out exactly what is wrong, and second, how do I resolve it.

  Read the article

• How to invalidate nginx reverse proxy cache in front of other nginx servers?

  - by Olivier Lance

  I'm running a Proxmox server on a single IP address, that will dispatch HTTP requests to containers depending on the requested host. I am using nginx on the Proxmox side to listen to HTTP requests and I am using the proxy_pass directive in my different server blocks to dispatch requests according to the server_name. My containers run on Ubuntu and are also running a nginx instance. I'm having troubles with caching on a particular website that is fully static: nginx keeps on serving me stale content after files updates, until I: Clear /var/cache/nginx/ and restart nginx or set proxy_cache off for this server and reload the config Here's the detail of my configuration: On the server (proxmox): /etc/nginx/nginx.conf: user www-data; worker_processes 8; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; use epoll; } http { ## # Basic Settings ## sendfile on; #tcp_nopush on; tcp_nodelay on; #keepalive_timeout 65; types_hash_max_size 2048; server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; client_body_buffer_size 1k; client_max_body_size 8m; large_client_header_buffers 1 1K; ignore_invalid_headers on; client_body_timeout 5; client_header_timeout 5; keepalive_timeout 5 5; send_timeout 5; server_name_in_redirect off; ## # Logging Settings ## access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; ## # Gzip Settings ## gzip on; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; gzip_vary on; gzip_proxied any; gzip_comp_level 6; # gzip_buffers 16 8k; gzip_http_version 1.1; gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; limit_conn_zone $binary_remote_addr zone=gulag:1m; limit_conn gulag 50; ## # Virtual Host Configs ## include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } /etc/nginx/conf.d/proxy.conf: proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_hide_header X-Powered-By; proxy_intercept_errors on; proxy_buffering on; proxy_cache_key "$scheme://$host$request_uri"; proxy_cache_path /var/cache/nginx levels=1:2 keys_zone=cache:10m inactive=7d max_size=700m; /etc/nginx/sites-available/my-domain.conf: server { listen 80; server_name .my-domain.com; access_log off; location / { proxy_pass http://my-domain.local:80/; proxy_cache cache; proxy_cache_valid 12h; expires 30d; proxy_cache_use_stale error timeout invalid_header updating; } } On the container (my-domain.local): nginx.conf: (everything is inside the main config file -- it's been done quickly...) user www-data; worker_processes 1; error_log logs/error.log; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; sendfile on; #tcp_nopush on; keepalive_timeout 65; gzip off; server { listen 80; server_name .my-domain.com; root /var/www; access_log logs/host.access.log; } } I've read many blog posts and answers before resolving to posting my own questions... most answers I can see suggest setting sendfile off; but that didn't work for me. I have tried many other things, double checked my settings and all seems fine. So I'm wondering whether I am not expecting nginx's cache to do something it's not meant to...? Basically, I thought that if one of my static files in my container was updated, the cache in my reverse proxy would be invalidated and my browser would get the new version of the file when it requests it... But I now have the sentiment I misunderstood many things. Of all things, I now wonder how nginx on the server can know about a file in the container has changed? I have seen a directive proxy_header_pass (or something alike), should I use this to let the nginx instance from the container somehow inform the one in Proxmox about updated files? Is this expectation just a dream, or can I do it with nginx on my current architecture?

  Read the article

• Router 2wire, Slackware desktop in DMZ mode, iptables policy aginst ping, but still pingable

  - by skriatok

  I'm in DMZ mode, so I'm firewalling myself, stealthy all ok, but I get faulty test results from Shields Up that there are pings. Yesterday I couldn't make a connection to game servers work, because ping block was enabled (on the router). I disabled it, but this persists even due to my firewall. What is the connection between me and my router in DMZ mode (for my machine, there is bunch of others too behind router firewall)? When it allows router affecting if I'm pingable or not and if router has setting not blocking ping, rules in my iptables for this scenario do not work. Please ignore commented rules, I do uncomment them as I want. These two should do the job right? iptables -A INPUT -p icmp --icmp-type echo-request -j DROP echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_all Here are my iptables: #!/bin/sh # Begin /bin/firewall-start # Insert connection-tracking modules (not needed if built into the kernel). #modprobe ip_tables #modprobe iptable_filter #modprobe ip_conntrack #modprobe ip_conntrack_ftp #modprobe ipt_state #modprobe ipt_LOG # allow local-only connections iptables -A INPUT -i lo -j ACCEPT # free output on any interface to any ip for any service # (equal to -P ACCEPT) iptables -A OUTPUT -j ACCEPT # permit answers on already established connections # and permit new connections related to established ones (eg active-ftp) iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT #Gamespy&NWN #iptables -A INPUT -p tcp -m tcp -m multiport --ports 5120:5129 -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 6667 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 28910 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29900 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29901 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29920 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p udp -m udp -m multiport --ports 5120:5129 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 6500 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 27900 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 27901 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 29910 -j ACCEPT # Log everything else: What's Windows' latest exploitable vulnerability? iptables -A INPUT -j LOG --log-prefix "FIREWALL:INPUT" # set a sane policy: everything not accepted > /dev/null iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT DROP iptables -A INPUT -p icmp --icmp-type echo-request -j DROP # be verbose on dynamic ip-addresses (not needed in case of static IP) echo 2 > /proc/sys/net/ipv4/ip_dynaddr # disable ExplicitCongestionNotification - too many routers are still # ignorant echo 0 > /proc/sys/net/ipv4/tcp_ecn #ping death echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_all # If you are frequently accessing ftp-servers or enjoy chatting you might # notice certain delays because some implementations of these daemons have # the feature of querying an identd on your box for your username for # logging. Although there's really no harm in this, having an identd # running is not recommended because some implementations are known to be # vulnerable. # To avoid these delays you could reject the requests with a 'tcp-reset': #iptables -A INPUT -p tcp --dport 113 -j REJECT --reject-with tcp-reset #iptables -A OUTPUT -p tcp --sport 113 -m state --state RELATED -j ACCEPT # To log and drop invalid packets, mostly harmless packets that came in # after netfilter's timeout, sometimes scans: #iptables -I INPUT 1 -p tcp -m state --state INVALID -j LOG --log-prefix \ "FIREWALL:INVALID" #iptables -I INPUT 2 -p tcp -m state --state INVALID -j DROP # End /bin/firewall-start Active ruleset: bash-4.1# iptables -L -n -v Chain INPUT (policy DROP 38 packets, 2228 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 844 542K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 38 2228 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 LOG flags 0 level 4 prefix `FIREWALL:INPUT' 0 0 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 38 2228 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 LOG flags 0 level 4 prefix `FIREWALL:INPUT' Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 1158 111K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 Active ruleset: (after editing iptables into below sugested form) bash-4.1# iptables -L -n -v Chain INPUT (policy DROP 2567 packets, 172K bytes) pkts bytes target prot opt in out source destination 49 4157 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 412K 441M ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 2567 172K LOG all -- * * 0.0.0.0/0 0.0.0.0/0 LOG flags 0 level 4 prefix `FIREWALL:INPUT' 0 0 DROP icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmp type 8 Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 312K packets, 25M bytes) pkts bytes target prot opt in out source destination ping and syslog simultaneous screenshots from phone (pinger) and from laptop (being pinged) http://dl.dropbox.com/u/4160051/slckwr/pingfrom%20mobile.jpg http://dl.dropbox.com/u/4160051/slckwr/tailsyslog.jpg

  Read the article

• slow DNS resolution

  - by Ehsan

  I have a DNS server that resolves all queries for an internal group of servers. It is a bind on CentOS 5.5 (same as RHEL5) and I have set it up to allow recursion and resolve direction without any forwarders. The problem I am facing is that it takes a freakishly long amount of time to resolve a name for the first time. (in the magnitudes of 20 sec) This causes clients to give timeout. When I set it to forward all to Google's public DNS, i.e. 8.8.8.8+8.8.4.4, it works very nicely (within a second). I tried monitoring the traffic on the net to see why it is doing this: [root@ns1 ~]# tcpdump -nnvvvA -s0 udp tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 23:06:36.137797 IP (tos 0x0, ttl 64, id 35903, offset 0, flags [none], proto: UDP (17), length: 60) 172.17.1.10.36942 > 172.17.1.4.53: [udp sum ok] 19773+ A? www.paypal.com. (32) E..<[email protected]... .....N.5.(6.M=...........www.paypal.com..... 23:06:36.140594 IP (tos 0x0, ttl 64, id 56477, offset 0, flags [none], proto: UDP (17), length: 71) 172.17.1.4.6128 > 192.35.51.30.53: [udp sum ok] 10105 [1au] A? www.paypal.com. ar: . OPT UDPsize=4096 (43) E..G....@........#3....5.3fR'y...........www.paypal.com.......)........ 23:06:38.149756 IP (tos 0x0, ttl 64, id 13078, offset 0, flags [none], proto: UDP (17), length: 71) 172.17.1.4.52425 > 192.54.112.30.53: [udp sum ok] 54892 [1au] A? www.paypal.com. ar: . OPT UDPsize=4096 (43) [email protected]&.....6p....5.3.q.l...........www.paypal.com.......)........ 23:06:40.159725 IP (tos 0x0, ttl 64, id 43016, offset 0, flags [none], proto: UDP (17), length: 71) 172.17.1.4.24059 > 192.42.93.30.53: [udp sum ok] 11205 [1au] A? www.paypal.com. ar: . OPT UDPsize=4096 (43) E..G....@..@.....*].]..5.3..+............www.paypal.com.......)........ 23:06:41.141403 IP (tos 0x0, ttl 64, id 35904, offset 0, flags [none], proto: UDP (17), length: 60) 172.17.1.10.36942 > 172.17.1.4.53: [udp sum ok] 19773+ A? www.paypal.com. (32) E..<.@..@..@... .....N.5.(6.M=...........www.paypal.com..... 23:06:42.169652 IP (tos 0x0, ttl 64, id 44001, offset 0, flags [none], proto: UDP (17), length: 60) 172.17.1.4.9141 > 192.55.83.30.53: [udp sum ok] 1184 A? www.paypal.com. (32) E..<[email protected].#..5.(...............www.paypal.com..... 23:06:42.207295 IP (tos 0x0, ttl 54, id 38004, offset 0, flags [none], proto: UDP (17), length: 205) 192.55.83.30.53 > 172.17.1.4.9141: [udp sum ok] 1184- q: A? www.paypal.com. 0/3/3 ns: paypal.com. NS ns1.isc-sns.net., paypal.com. NS ns2.isc-sns.com., paypal.com. NS ns3.isc-sns.info. ar: ns1.isc-sns.net. AAAA 2001:470:1a::1, ns1.isc-sns.net. A 72.52.71.1, ns2.isc-sns.com. A 38.103.2.1 (177) E....t..6./A.7S......5#..................www.paypal.com..................ns1.isc-sns.net..............ns2.isc-sns...............ns3.isc-sns.info..,.......... ..p.............,..........H4G..I..........&g.. (this goes on for a few more seconds) If you look carefully, you will see that the first 3-4 root servers did not respond at all. This wastes 7-8 seconds, until one of them responded. Do you think I have setup something wrong here? Interestingly, when I dig directly from the root servers that did not respond, the always respond very fast (showing the firewall/nat is not the issue here). E.g. dig www.paypal.com @192.35.51.30 works perfectly, consistently, and very fast. What do you think about this mystery?

  Read the article

• ASA 5505 Vlan question

  - by Wayne

  I am setting up a cisco asa 5505 with the base license. I can communicate from inside-outside, outside-inside, inside-home, which is my desired traffic security. I can get http, ssh, and other access from inside-home, but I can't ping from inside-home (192.168.110.0 host to 192.168.7.1 or 192.168.7.0 host). Can someone explain. My config is listed below interface Vlan1<br> nameif inside<br> security-level 100<br> ip address 192.168.110.254 255.255.255.0 <br> !<br> interface Vlan2<br> nameif outside<br> security-level 0<br> pppoe client vpdn group birdie<br> ip address removedIP 255.255.255.255 pppoe <br> !<br> interface Vlan3<br> no forward interface Vlan1<br> nameif home<br> security-level 50<br> ip address 192.168.7.1 255.255.255.0 <br> ! <br> interface Ethernet0/0<br> switchport access vlan 2<br> ! <br> interface Ethernet0/1<br> ! <br> interface Ethernet0/2<br> ! <br> interface Ethernet0/3<br> ! <br> interface Ethernet0/4<br> switchport access vlan 3<br> ! <br> interface Ethernet0/5<br> shutdown <br> ! <br> interface Ethernet0/6<br> shutdown <br> ! <br> interface Ethernet0/7<br> shutdown <br> ! <br> ftp mode passive<br> clock timezone EST -5<br> clock summer-time EDT recurring<br> access-list Outside-In extended permit icmp any any <br> access-list Outside-In extended permit tcp any any eq www <br> access-list Outside-In extended permit tcp any any eq https <br> access-list Outside-In extended permit tcp any any eq 5969 <br> access-list inside_nat0_outbound extended permit ip any 192.168.111.0 255.255.255.224 <br> access-list standardUser_splitTunnelAcl1 extended permit ip 192.168.111.0 255.255.255.0 any <br> access-list standardUser_splitTunnelAcl1 extended permit ip 192.168.110.0 255.255.255.0 <br>any access-list inside_in extended permit icmp any any <br> access-list inside_in extended permit ip any any <br> access-list home_in extended permit icmp any any <br> access-list home_in extended permit ip any any <br> pager lines 24<br> logging enable<br> logging asdm informational<br> mtu inside 1492<br> mtu outside 1492<br> mtu home 1500 <br> ip local pool vpnuser 192.168.111.5-192.168.111.20<br> icmp unreachable rate-limit 1 burst-size 1<br> asdm image disk0:/asdm-524.bin<br> no asdm history enable<br> arp timeout 14400<br> nat-control <br> global (outside) 1 interface<br> nat (inside) 0 access-list inside_nat0_outbound<br> nat (inside) 1 0.0.0.0 0.0.0.0<br> nat (home) 1 192.168.7.0 255.255.255.0<br> static (inside,outside) tcp interface https 192.168.110.6 https netmask 255.255.255.255 <br> static (inside,outside) tcp interface www 192.168.110.6 www netmask 255.255.255.255 <br> static (inside,outside) tcp interface 5969 192.168.110.12 5969 netmask 255.255.255.255 <br> static (inside,home) 192.168.110.0 192.168.110.0 netmask 255.255.255.0 <br> access-group inside_in in interface inside<br> access-group Outside-In in interface outside<br> access-group home_in in interface home<br> route outside 0.0.0.0 0.0.0.0 RemovedIP 1<br>

  Read the article

• How does this main domain have a CNAME record?

  - by TRiG

  I was under the impression that only subdomains could have CNAME records: main domains need to define all their own records. However, apt-get.com seems to have only a CNAME record. How can this work? $ dig apt-get.com ; <<>> DiG 9.8.1-P1 <<>> apt-get.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 45743 ;; flags: qr rd ra; QUERY: 1, ANSWER: 9, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;apt-get.com. IN A ;; ANSWER SECTION: apt-get.com. 86336 IN CNAME thie5ku9.dsgeneration.com. thie5ku9.dsgeneration.com. 60 IN A 208.73.211.242 thie5ku9.dsgeneration.com. 60 IN A 208.73.211.246 thie5ku9.dsgeneration.com. 60 IN A 208.73.211.166 thie5ku9.dsgeneration.com. 60 IN A 208.73.211.232 thie5ku9.dsgeneration.com. 60 IN A 208.73.211.161 thie5ku9.dsgeneration.com. 60 IN A 208.73.210.233 thie5ku9.dsgeneration.com. 60 IN A 208.73.211.186 thie5ku9.dsgeneration.com. 60 IN A 208.73.211.188 ;; Query time: 59 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Tue Jun 10 15:05:48 2014 ;; MSG SIZE rcvd: 193 $ dig apt-get.com ns ; <<>> DiG 9.8.1-P1 <<>> apt-get.com ns ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 43831 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;apt-get.com. IN NS ;; Query time: 26 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Tue Jun 10 15:12:37 2014 ;; MSG SIZE rcvd: 29 $ dig apt-get.com ns @b.gtld-servers.net ; <<>> DiG 9.8.1-P1 <<>> apt-get.com ns @b.gtld-servers.net ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 38228 ;; flags: qr rd; QUERY: 1, ANSWER: 0, AUTHORITY: 2, ADDITIONAL: 2 ;; WARNING: recursion requested but not available ;; QUESTION SECTION: ;apt-get.com. IN NS ;; AUTHORITY SECTION: apt-get.com. 172800 IN NS ns1.domainrecover.com. apt-get.com. 172800 IN NS ns2.domainrecover.com. ;; ADDITIONAL SECTION: ns1.domainrecover.com. 172800 IN A 66.45.232.66 ns2.domainrecover.com. 172800 IN A 65.23.159.179 ;; Query time: 70 msec ;; SERVER: 192.33.14.30#53(192.33.14.30) ;; WHEN: Tue Jun 10 15:07:05 2014 ;; MSG SIZE rcvd: 111 The domain does resolve. I get the following headers: GET / HTTP/1.1 User-Agent: Testing_Sniffer/4.15 Host: apt-get.com Accept: */* HTTP/1.0 200 (OK) Cache-Control: private, no-cache, must-revalidate Connection: Keep-Alive Pragma: no-cache Server: Oversee Turing v1.0.0 Content-Length: 1347 Content-Type: text/html Expires: Mon, 26 Jul 1997 05:00:00 GMT Keep-Alive: timeout=3, max=96 P3P: policyref="http://www.dsparking.com/w3c/p3p.xml", CP="NOI DSP COR ADMa OUR NOR STA" Set-Cookie: parkinglot=1; domain=.apt-get.com; path=/; expires=Wed, 11-Jun-2014 14:10:37 GMT <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Frameset//EN" "http://www.w3.org/TR/html4/frameset.dtd"> <!-- turing_cluster_prod --> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>apt-get.com</title> <meta name="keywords" content="apt-get.com" /> <meta name="description" content="apt-get.com" /> <meta name="robots" content="index, follow" /> <meta name="revisit-after" content="10" /> <meta name="viewport" content="width=device-width, initial-scale=1.0" /> <script type="text/javascript"> document.cookie = "jsc=1"; </script> </head> <frameset rows="100%,*" frameborder="no" border="0" framespacing="0"> <frame src="http://apt-get.com?epl=5PfLSSqWrYDAt-gbwMDK_rA3b1UJCYVTJHfxTzr9FTDQV84b6vAgVhU3FTeCRQNiuRNv79Ni0V3mkEVNRhpqo2gpMjp5iOIR1w2_EISPENaqzoXohVXl2QI3ryXlRCB4FaIIaxynnWXWY6QBgBgNiIZ6agD1NBoNGg0ajXpUCXUAIJDer78AAOB_AwAAQIDbCwAAe_NWlVlTJllBMTZoWkKPAAAA8A" name="apt-get.com"> </frameset> <noframes> <body><a href="http://apt-get.com?epl=5PfLSSqWrYDAt-gbwMDK_rA3b1UJCYVTJHfxTzr9FTDQV84b6vAgVhU3FTeCRQNiuRNv79Ni0V3mkEVNRhpqo2gpMjp5iOIR1w2_EISPENaqzoXohVXl2QI3ryXlRCB4FaIIaxynnWXWY6QBgBgNiIZ6agD1NBoNGg0ajXpUCXUAIJDer78AAOB_AwAAQIDbCwAAe_NWlVlTJllBMTZoWkKPAAAA8A">Click here to go to apt-get.com</a>.</body> </noframes> </html>

  Read the article

• ldirectord ipvsadm not show reals ip and not work wtih pacemaker and corosync

  - by miguer27

  first thanks for your time. I'm having a problem with ldirectord that I can not solve, I comment my situation: I have two nodes with pace maker and corosync and configure somes resources: root@ldap1:/home/mamartin# crm status Last updated: Tue Jun 3 12:58:30 2014 Last change: Tue Jun 3 12:23:47 2014 via cibadmin on ldap1 Stack: openais Current DC: ldap2 - partition with quorum Version: 1.1.7-ee0730e13d124c3d58f00016c3376a1de5323cff 2 Nodes configured, 2 expected votes 7 Resources configured. Online: [ ldap1 ldap2 ] Resource Group: IPV_LVS IPV_4 (ocf::heartbeat:IPaddr2): Started ldap1 IPV_6 (ocf::heartbeat:IPv6addr): Started ldap1 lvs (ocf::heartbeat:ldirectord): Started ldap1 Clone Set: clon_IPV_lo [IPV_lo] Started: [ ldap2 ] Stopped: [ IPV_lo:1 ] root@ldap1:/home/mamartin# crm configure show node ldap2 \ attributes standby="off" node ldap1 \ attributes standby="off" primitive IPV-lo_4 ocf:heartbeat:IPaddr \ params ip="192.168.1.10" cidr_netmask="32" nic="lo" \ op monitor interval="5s" primitive IPV-lo_6 ocf:heartbeat:IPv6addrLO \ params ipv6addr="[fc00:1::3]" cidr_netmask="64" \ op monitor interval="5s" primitive IPV_4 ocf:heartbeat:IPaddr2 \ params ip="192.168.1.10" nic="eth0" cidr_netmask="25" lvs_support="true" \ op monitor interval="5s" primitive IPV_6 ocf:heartbeat:IPv6addr \ params ipv6addr="[fc00:1::3]" nic="eth0" cidr_netmask="64" \ op monitor interval="5s" primitive lvs ocf:heartbeat:ldirectord \ params configfile="/etc/ldirectord.cf" \ op monitor interval="20" timeout="10" \ meta target-role="Started" group IPV_LVS IPV_4 IPV_6 lvs group IPV_lo IPV-lo_6 IPV-lo_4 clone clon_IPV_lo IPV_lo \ meta interleave="true" target-role="Started" location cli-prefer-IPV_LVS IPV_LVS \ rule $id="cli-prefer-rule-IPV_LVS" inf: #uname eq ldap1 colocation LVS_no_IPV_lo -inf: clon_IPV_lo IPV_LVS property $id="cib-bootstrap-options" \ dc-version="1.1.7-ee0730e13d124c3d58f00016c3376a1de5323cff" \ cluster-infrastructure="openais" \ expected-quorum-votes="2" \ no-quorum-policy="ignore" \ stonith-enabled="false" \ last-lrm-refresh="1401264327" rsc_defaults $id="rsc-options" \ resource-stickiness="1000" The problem is in the ipvsadm only show a one real IP, when i configured two now, show the ldirector.cf: root@ldap1:/home/mamartin# ipvsadm IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags - RemoteAddress:Port Forward Weight ActiveConn InActConn TCP ldap-maqueta.cica.es:ldap wrr - ldap2.cica.es:ldap Route 4 0 0 TCP [[fc00:1::3]]:ldap wrr - [[fc00:1::2]]:ldap Route 4 0 0 root@ldap1:/home/mamartin# cat /etc/ldirectord.cf checktimeout=10 checkinterval=2 autoreload=yes logfile="/var/log/ldirectord.log" quiescent=yes #ipv4 virtual=192.168.1.10:389 real=192.168.1.11:389 gate 4 real=192.168.1.12:389 gate 4 scheduler=wrr protocol=tcp checktype=on #ipv6 virtual6=[[fc00:1::3]]:389 real6=[[fc00:1::1]]:389 gate 4 real6=[[fc00:1::2]]:389 gate 4 scheduler=wrr protocol=tcp checkport=389 checktype=on and in the logs I see nothing clear: root@ldap1:/home/mamartin# ldirectord -d /etc/ldirectord.cf start DEBUG2: Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.11:389 -g -w 0) Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.11:389 -g -w 0) DEBUG2: Quiescent real server: 192.168.1.11:389 (192.168.1.10:389) (Weight set to 0) Quiescent real server: 192.168.1.11:389 (192.168.1.10:389) (Weight set to 0) DEBUG2: Disabled real server=on:tcp:192.168.1.11:389:::4:gate:\/: (virtual=tcp:192.168.1.10:389) DEBUG2: Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.12:389 -g -w 0) Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.12:389 -g -w 0) DEBUG2: Quiescent real server: 192.168.1.12:389 (192.168.1.10:389) (Weight set to 0) Quiescent real server: 192.168.1.12:389 (192.168.1.10:389) (Weight set to 0) DEBUG2: Disabled real server=on:tcp:192.168.1.12:389:::4:gate:\/: (virtual=tcp:192.168.1.10:389) DEBUG2: Checking on: Real servers are added without any checks DEBUG2: Resetting soft failure count: 192.168.1.12:389 (tcp:192.168.1.10:389) Resetting soft failure count: 192.168.1.12:389 (tcp:192.168.1.10:389) DEBUG2: Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.12:389 -g -w 4) Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.12:389 -g -w 4) Destination already exists root@ldap1:/home/mamartin# cat /var/log/ldirectord.log [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Quiescent real server: 192.168.1.11:389 (192.168.1.10:389) (Weight set to 0) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Quiescent real server: 192.168.1.12:389 (192.168.1.10:389) (Weight set to 0) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Resetting soft failure count: 192.168.1.12:389 (tcp:192.168.1.10:389) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.12:389 -g -w 4) failed: [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Added real server: 192.168.1.12:389 (192.168.1.10:389) (Weight set to 4) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Resetting soft failure count: 192.168.1.11:389 (tcp:192.168.1.10:389) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Restored real server: 192.168.1.11:389 (192.168.1.10:389) (Weight set to 4) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Resetting soft failure count: [[fc00:1::2]]:389 (tcp:[[fc00:1::3]]:389) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] system(/sbin/ipvsadm -a -t [[fc00:1::3]]:389 -r [[fc00:1::2]]:389 -g -w 4) failed: [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Added real server: [[fc00:1::2]]:389 ([[fc00:1::3]]:389) (Weight set to 4) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Resetting soft failure count: [[fc00:1::1]]:389 (tcp:[[fc00:1::3]]:389) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Restored real server: [[fc00:1::1]]:389 ([[fc00:1::3]]:389) (Weight set to 4) do not know if this is a bug or a configuration error, can anyone help? Regards.

  Read the article

• Nginx & Apache Cannot get try_files to work with permalinks

  - by tcherokee

  I have been working on this for the past two weeks not and for some reason I cannot seem to get nginx's try_files to work with my wordpress permalinks. I am hoping someone will be able to tell me where I am going wrong and also hopefully tell me if I made any major errors with my configurations as well (I am an nginx newbie... but learning :) ). Here are my Configuration files nginx.conf user www-data; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; # server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## # Defines the cache log format, cache log location # and the main access log location. log_format cache '***$time_local ' '$upstream_cache_status ' 'Cache-Control: $upstream_http_cache_control ' 'Expires: $upstream_http_expires ' '$host ' '"$request" ($status) ' '"$http_user_agent" ' ; access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } mydomain.com.conf server { listen 123.456.78.901:80; # IP goes here. server_name www.mydomain.com mydomain.com; #root /var/www/mydomain.com/prod; index index.php; ## mydomain.com -> www.mydomain.com (301 - Permanent) if ($host !~* ^(www|dev)) { rewrite ^/(.*)$ $scheme://www.$host/$1 permanent; } # Add trailing slash to */wp-admin requests. rewrite /wp-admin$ $scheme://$host$uri/ permanent; # All media (including uploaded) is under wp-content/ so # instead of caching the response from apache, we're just # going to use nginx to serve directly from there. location ~* ^/(wp-content|wp-includes)/(.*)\.(jpg|png|gif|jpeg|css|js|m$ root /var/www/mydomain.com/prod; } # Don't cache these pages. location ~* ^/(wp-admin|wp-login.php) { proxy_pass http://backend; } location / { if ($http_cookie ~* "wordpress_logged_in_[^=]*=([^%]+)%7C") { set $do_not_cache 1; } proxy_cache_key "$scheme://$host$request_uri $do_not_cache"; proxy_cache main; proxy_pass http://backend; proxy_cache_valid 30m; # 200, 301 and 302 will be cached. # Fallback to stale cache on certain errors. # 503 is deliberately missing, if we're down for maintenance # we want the page to display. #try_files $uri $uri/ /index.php?q=$uri$args; #try_files $uri =404; proxy_cache_use_stale error timeout invalid_header http_500 http_502 http_504 http_404; } # Cache purge URL - works in tandem with WP plugin. # location ~ /purge(/.*) { # proxy_cache_purge main "$scheme://$host$1"; # } # No access to .htaccess files. location ~ /\.ht { deny all; } } # End server gzip.conf # Gzip Configuration. gzip on; gzip_disable msie6; gzip_static on; gzip_comp_level 4; gzip_proxied any; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; proxy.conf # Set proxy headers for the passthrough proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_max_temp_file_size 0; client_max_body_size 10m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffer_size 4k; proxy_buffers 4 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; add_header X-Cache-Status $upstream_cache_status; backend.conf upstream backend { # Defines backends. # Extracting here makes it easier to load balance # in the future. Needs to be specific IP as Plesk # doesn't have Apache listening on localhost. ip_hash; server 127.0.0.1:8001; # IP goes here. } cache.conf # Proxy cache and temp configuration. proxy_cache_path /var/www/nginx_cache levels=1:2 keys_zone=main:10m max_size=1g inactive=30m; proxy_temp_path /var/www/nginx_temp; proxy_cache_key "$scheme://$host$request_uri"; proxy_redirect off; # Cache different return codes for different lengths of time # We cached normal pages for 10 minutes proxy_cache_valid 200 302 10m; proxy_cache_valid 404 1m; The two commented out try_files in location \ of the mydomain config files are the ones I tried. This error I found in the error log can be found below. ...rewrite or internal redirection cycle while internally redirecting to "/index.php" Thanks in advance

  Read the article

• GitLab on a fresh Ubuntu 13 EC2 instance

  - by Polly

  I've spun up a fresh Amazon EC2 instance for a micro Ubuntu 13 server to be used as a GitLab server. I know the specs are a little low, but it should serve well for my purposes. It has an elastic (static) IP address that I have created an A record for git.mydomain.com. The first thing I did to the instance was add 1GB of swap to keep it happy from a memory perspective. I then set the hostname of the box to be git.mydomain.com and followed https://github.com/gitlabhq/gitlabhq/blob/6-2-stable/doc/install/installation.md to the letter. Everything seems to have worked, except for the web server side of things. Doing a gitlab:check shows the following: Checking Environment ... Git configured for git user? ... yes Has python2? ... yes python2 is supported version? ... yes Checking Environment ... Finished Checking GitLab Shell ... GitLab Shell version >= 1.7.4 ? ... OK (1.7.4) Repo base directory exists? ... yes Repo base directory is a symlink? ... no Repo base owned by git:git? ... yes Repo base access is drwxrws---? ... yes update hook up-to-date? ... yes update hooks in repos are links: ... can't check, you have no projects Running /home/git/gitlab-shell/bin/check Check GitLab API access: /usr/local/lib/ruby/2.0.0/net/http.rb:878:in `initialize': Connection refused - connect(2) (Errno::ECONNREFUSED) from /usr/local/lib/ruby/2.0.0/net/http.rb:878:in `open' from /usr/local/lib/ruby/2.0.0/net/http.rb:878:in `block in connect' from /usr/local/lib/ruby/2.0.0/timeout.rb:52:in `timeout' from /usr/local/lib/ruby/2.0.0/net/http.rb:877:in `connect' from /usr/local/lib/ruby/2.0.0/net/http.rb:862:in `do_start' from /usr/local/lib/ruby/2.0.0/net/http.rb:851:in `start' from /home/git/gitlab-shell/lib/gitlab_net.rb:62:in `get' from /home/git/gitlab-shell/lib/gitlab_net.rb:29:in `check' from /home/git/gitlab-shell/bin/check:11:in `<main>' gitlab-shell self-check failed Try fixing it: Make sure GitLab is running; Check the gitlab-shell configuration file: sudo -u git -H editor /home/git/gitlab-shell/config.yml Please fix the error above and rerun the checks. Checking GitLab Shell ... Finished Checking Sidekiq ... Running? ... yes Number of Sidekiq processes ... 1 Checking Sidekiq ... Finished Checking GitLab ... Database config exists? ... yes Database is SQLite ... no All migrations up? ... yes GitLab config exists? ... yes GitLab config outdated? ... no Log directory writable? ... yes Tmp directory writable? ... yes Init script exists? ... yes Init script up-to-date? ... yes projects have namespace: ... can't check, you have no projects Projects have satellites? ... can't check, you have no projects Redis version >= 2.0.0? ... yes Your git bin path is "/usr/bin/git" Git version >= 1.7.10 ? ... yes (1.8.3) Checking GitLab ... Finished It seems like I'm very nearly there. Searching on this error I have only found advice that unfortunately hasn't helped. I'm not using any kind of SSL setup, which a lot of the posts I found were about. I have tried appending 127.0.0.1 git.mydomain.com to /etc/hosts and giving the instance a reboot but there was no change. My config/gitlab.yml file has host: git.mydomain.com in it, and my gitlab-shell/config.yml has gitlab_url: "http://git.mydomain.com/" in it. I'm sure I'm missing something simple, but I've been through every relevant link I can find and have had no positive results; thank you in advance for any help!

  Read the article

• Linux/Apache performance very slow even on local network

  - by klausch

  I have an Ubuntu server machine running Apache and MYSQL. System and version info is as follows: Linux kernel 3.0.0.-12 Apache/2.2.20 MySQL Ver 14.14.Distrib 5.1.58 I am running a few websites on this server, some HTML only, some PHP/MySQL. THe [problem is that response time is very slow, both on static as well as the dynamic sites. Sometimes it takes more than 10 seconds before a response is given, this makes the sites very slow and almost unusable. The problem occurs even when requesting from the local network. I have added the involved subdomains to my /etc/hosts file, and abolve all the problem is not solved by using IP numbers instead of URL's. So there is no DNS lookup issue. I have modified the log format by showing the response times and sometimes a files takes 12 seconds to be served, see the jquery~.js file in the example screenshot. I have no explanation for this extremely long response time, but is is not even the only issue here, some other files takes a long time to be served too, but do not show a long response time in the log file. So probably different tissues are involved here. I cannot find a solution until now, any suggestions??? THanx in advance, Klaas link to screenshot picture from access logfile Some extra configuration info: apache2.conf (comment is removed) LockFile ${APACHE_LOCK_DIR}/accept.lock PidFile ${APACHE_PID_FILE} Timeout 300 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 5 <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> <IfModule mpm_worker_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> <IfModule mpm_event_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} AccessFileName .htaccess <Files ~ "^\.ht"> Order allow,deny Deny from all Satisfy all </Files> DefaultType text/plain HostnameLookups Off ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn Include mods-enabled/*.load Include mods-enabled/*.conf Include httpd.conf Include ports.conf LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\" %T/%D" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent Include conf.d/ Include sites-enabled/ And the virtual hostfile for one of the slow sites, in fact it is pretty straightforward... <VirtualHost *:80> ServerAdmin [email protected] ServerSignature EMail ServerName toenjoy.drsklaus.nl DocumentRoot /var/www/toenjoy.drsklaus.nl <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/toenjoy.drsklaus.nl/> Options Indexes FollowSymLinks MultiViews AllowOverride AuthConfig AuthType Basic AuthName "To Enjoy" AuthUserFile /etc/.htpasswd Require user petraaa Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> And the output of free -m: klaas@ubuntu-server:/etc/apache2$ free -m total used free shared buffers cached Mem: 1997 1401 595 0 144 1017 -/+ buffers/cache: 238 1758 Swap: 2035 0 2035 and I have no indication that swapping occurs on the moments the site is slow. I have runned top and it does not appear to be a CPU issue. I have the impression that the spawning of a apache thread could maybe be the bottleneck but it is just a suggestion. Maybe this gives some extra information! EDIT: The problem seemed to be gone for some time but occurs again! And not only with Apache, also connecting using SSH takes a tremendous time, sometimes it takes up to 15 seconds before the keyphrase is asked for. Also scp works very slowly. The behavious is really unpredoctable and makes the server very hard to use. Any ideas...?

  Read the article

• Unable to import Maven project into IntelliJ IDEA

  - by del

  I'm having problems importing any Maven projects into IntelliJ IDEA. I create an empty Maven project like this: $ mvn archetype:generate -DgroupId=com.mycompany.app -DartifactId=my-app -DarchetypeArtifactId=maven-archetype-quickstart -DinteractiveMode=false Then I try to open the project in IDEA (File Open Project, then choose the pom.xml). A progress box saying "Reading pom.xml" displays for a few minutes, and then just disappears without opening the project. Looking in the IDEA log, I see some connection timeout exceptions like this: 2012-10-03 11:55:55,483 [ 16981] INFO - ution.rmi.RemoteProcessSupport - Port/ID: 18011/Maven2ServerImpl9407569f 2012-10-03 11:56:58,898 [ 80396] WARN - ution.rmi.RemoteProcessSupport - The cook failed to start due to java.net.ConnectException: Connection timed out 2012-10-03 11:57:55,483 [ 136981] WARN - ution.rmi.RemoteProcessSupport - java.rmi.NotBoundException: _DEAD_HAND_ 2012-10-03 11:57:55,484 [ 136982] WARN - ution.rmi.RemoteProcessSupport - at sun.rmi.registry.RegistryImpl.lookup(RegistryImpl.java:106) 2012-10-03 11:57:55,484 [ 136982] WARN - ution.rmi.RemoteProcessSupport - at com.intellij.execution.rmi.RemoteServer.start(RemoteServer.java:73) 2012-10-03 11:57:55,484 [ 136982] WARN - ution.rmi.RemoteProcessSupport - at org.jetbrains.idea.maven.server.RemoteMavenServer.main(RemoteMavenServer.java:22) 2012-10-03 11:58:01,749 [ 143247] ERROR - com.intellij.ide.IdeEventQueue - Error during dispatching of java.awt.event.MouseEvent[MOUSE_RELEASED,(65,116),absolute(64,140),button=1,modifiers=Button1,clickCount=1] on frame0 java.lang.RuntimeException: Cannot reconnect. at org.jetbrains.idea.maven.server.RemoteObjectWrapper.perform(RemoteObjectWrapper.java:82) at org.jetbrains.idea.maven.server.MavenServerManager.applyProfiles(MavenServerManager.java:311) at org.jetbrains.idea.maven.project.MavenProjectReader.applyProfiles(MavenProjectReader.java:369) at org.jetbrains.idea.maven.project.MavenProjectReader.doReadProjectModel(MavenProjectReader.java:98) at org.jetbrains.idea.maven.project.MavenProjectReader.readProject(MavenProjectReader.java:52) at org.jetbrains.idea.maven.project.MavenProject.read(MavenProject.java:405) at org.jetbrains.idea.maven.project.MavenProjectsTree.doUpdate(MavenProjectsTree.java:534) at org.jetbrains.idea.maven.project.MavenProjectsTree.doAdd(MavenProjectsTree.java:481) at org.jetbrains.idea.maven.project.MavenProjectsTree.update(MavenProjectsTree.java:442) at org.jetbrains.idea.maven.project.MavenProjectsTree.updateAll(MavenProjectsTree.java:413) at org.jetbrains.idea.maven.wizards.MavenProjectBuilder.readMavenProjectTree(MavenProjectBuilder.java:198) at org.jetbrains.idea.maven.wizards.MavenProjectBuilder.access$800(MavenProjectBuilder.java:44) at org.jetbrains.idea.maven.wizards.MavenProjectBuilder$3.run(MavenProjectBuilder.java:179) at org.jetbrains.idea.maven.utils.MavenUtil$8.run(MavenUtil.java:388) at com.intellij.openapi.progress.impl.ProgressManagerImpl$TaskRunnable.run(ProgressManagerImpl.java:469) at com.intellij.openapi.progress.impl.ProgressManagerImpl$6.run(ProgressManagerImpl.java:288) at com.intellij.openapi.progress.impl.ProgressManagerImpl$2.run(ProgressManagerImpl.java:178) at com.intellij.openapi.progress.impl.ProgressManagerImpl.executeProcessUnderProgress(ProgressManagerImpl.java:218) at com.intellij.openapi.progress.impl.ProgressManagerImpl.runProcess(ProgressManagerImpl.java:169) at com.intellij.openapi.application.impl.ApplicationImpl$8$1.run(ApplicationImpl.java:641) at com.intellij.openapi.application.impl.ApplicationImpl$6.run(ApplicationImpl.java:434) at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441) at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) at java.util.concurrent.FutureTask.run(FutureTask.java:138) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) at java.lang.Thread.run(Thread.java:662) at com.intellij.openapi.application.impl.ApplicationImpl$1$1.run(ApplicationImpl.java:145) Caused by: java.rmi.RemoteException: Cannot start maven service; nested exception is: java.rmi.ConnectException: Connection refused to host: localhost; nested exception is: java.net.ConnectException: Connection timed out at org.jetbrains.idea.maven.server.MavenServerManager.create(MavenServerManager.java:120) at org.jetbrains.idea.maven.server.MavenServerManager.create(MavenServerManager.java:71) at org.jetbrains.idea.maven.server.RemoteObjectWrapper.getOrCreateWrappee(RemoteObjectWrapper.java:41) at org.jetbrains.idea.maven.server.MavenServerManager$8.execute(MavenServerManager.java:314) at org.jetbrains.idea.maven.server.MavenServerManager$8.execute(MavenServerManager.java:311) at org.jetbrains.idea.maven.server.RemoteObjectWrapper.perform(RemoteObjectWrapper.java:76) ... 27 more Caused by: java.rmi.ConnectException: Connection refused to host: localhost; nested exception is: java.net.ConnectException: Connection timed out at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601) at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198) at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184) at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322) at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source) at com.intellij.execution.rmi.RemoteProcessSupport$2.compute(RemoteProcessSupport.java:215) at com.intellij.execution.rmi.RemoteUtil.executeWithClassLoader(RemoteUtil.java:122) at com.intellij.execution.rmi.RemoteProcessSupport.acquire(RemoteProcessSupport.java:212) at com.intellij.execution.rmi.RemoteProcessSupport.acquire(RemoteProcessSupport.java:133) at org.jetbrains.idea.maven.server.MavenServerManager.create(MavenServerManager.java:117) ... 32 more Caused by: java.net.ConnectException: Connection timed out at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:213) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) at java.net.Socket.connect(Socket.java:529) at java.net.Socket.connect(Socket.java:478) at java.net.Socket.(Socket.java:375) at java.net.Socket.(Socket.java:189) at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22) at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128) at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595) ... 41 more I'm using the latest versions of IDEA (11.1.3) and Maven (3.0.4). Any ideas what I am doing wrong?

  Read the article

• Random Access Violation Exception in WPF Application

  - by PT1984

  Hi, I am facing weird problem while running regression tests on my WPF Application. I am getting AccessViolationException with different stacktraces each time. First : Message :Attempted to read or write protected memory. This is often an indication that other memory is corrupt. StackTrace : at MS.Win32.PresentationCore.UnsafeNativeMethods.MILUnknown.Release(IntPtr pIUnkown) at MS.Win32.PresentationCore.UnsafeNativeMethods.MILUnknown.ReleaseInterface(IntPtr& ptr) at System.Windows.Media.SafeMILHandle.ReleaseHandle() at System.Runtime.InteropServices.SafeHandle.InternalFinalize() at System.Runtime.InteropServices.SafeHandle.Dispose(Boolean disposing) at System.Runtime.InteropServices.SafeHandle.Finalize() Source :PresentationCore Type : System.AccessViolationException. Second : Message :Attempted to read or write protected memory. This is often an indication that other memory is corrupt. StackTrace : at MS.Win32.PresentationCore.UnsafeNativeMethods.IMILBitmapEffect.GetOutput(SafeHandle THIS_PTR, UInt32 uiIndex, SafeMILHandle pContext, BitmapSourceSafeMILHandle& ppBitmapSource) at System.Windows.Media.Effects.BitmapEffect.GetOutput(SafeHandle unmanagedEffect, Int32 index, BitmapEffectRenderContext context) at System.Windows.Media.Effects.BitmapEffect.GetOutput(BitmapEffectInput input) at System.Windows.Media.Effects.BitmapEffectState.GetEffectOutput(Visual visual, RenderTargetBitmap& renderBitmap, Matrix worldTransform, Rect windowClip, Matrix& finalTransform) at System.Windows.Media.Effects.BitmapEffectVisualState.RenderBitmapEffect(Visual visual, Channel channel) at System.Windows.Media.Effects.BitmapEffectContent.ExecuteRealizationsUpdate() at System.Windows.Media.RealizationContext.RealizationUpdateSchedule.Execute() at System.Windows.Media.MediaContext.Render(ICompositionTarget resizedCompositionTarget) at System.Windows.Media.MediaContext.RenderMessageHandlerCore(Object resizedCompositionTarget) at System.Windows.Media.MediaContext.AnimatedRenderMessageHandler(Object resizedCompositionTarget) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter) at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler) at System.Windows.Threading.Dispatcher.WrappedInvoke(Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler) at System.Windows.Threading.DispatcherOperation.InvokeImpl() at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(Object state) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Windows.Threading.DispatcherOperation.Invoke() at System.Windows.Threading.Dispatcher.ProcessQueue() at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter) at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler) at System.Windows.Threading.Dispatcher.WrappedInvoke(Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler) at System.Windows.Threading.Dispatcher.InvokeImpl(DispatcherPriority priority, TimeSpan timeout, Delegate method, Object args, Boolean isSingleParameter) at System.Windows.Threading.Dispatcher.Invoke(DispatcherPriority priority, Delegate method, Object arg) at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam) at MS.Win32.UnsafeNativeMethods.DispatchMessage(MSG& msg) at System.Windows.Threading.Dispatcher.PushFrameImpl(DispatcherFrame frame) at System.Windows.Threading.Dispatcher.PushFrame(DispatcherFrame frame) at System.Windows.Threading.Dispatcher.Run() at System.Windows.Application.RunDispatcher(Object ignore) at System.Windows.Application.RunInternal(Window window) at System.Windows.Application.Run(Window window) at System.Windows.Application.Run() at Main() Source :PresentationCore Type :System.AccessViolationException In Application Event Log I found following entries : Dispatcher processing has been suspended, but messages are still being processed. Faulting application **.exe, version 1.0.0.*, stamp 4c08d288, faulting module wpfgfx_v0300.dll, version 3.0.6920.1427, stamp 488f3056, debug? 0, fault address 0x0012ec36. My Application uses Dispatcher from another thread, to change the values of the controls , enable - disable those, change visibility etc., the thred is run multiple times in a second. Please let me know if anybody has faced this problem? Thanks in advance, -Prasad

  Read the article

• "Access is denied" JavaScript error when trying to access the document object of a programmatically-

  - by Bungle

  I have project in which I need to create an <iframe> element using JavaScript and append it to the DOM. After that, I need to insert some content into the <iframe>. It's a widget that will be embedded in third-party websites. I don't set the "src" attribute of the <iframe> since I don't want to load a page; rather, it is used to isolate/sandbox the content that I insert into it so that I don't run into CSS or JavaScript conflicts with the parent page. I'm using JSONP to load some HTML content from a server and insert it in this <iframe>. I have this working fine, with one serious exception - if the document.domain property is set in the parent page (which it may be in certain environments in which this widget is deployed), Internet Explorer (probably all versions, but I've confirmed in 6, 7, and 8) gives me an "Access is denied" error when I try to access the document object of this <iframe> I've created. It doesn't happen in any other browsers I've tested in (all major modern ones). This makes some sense, since I'm aware that Internet Explorer requires you to set the document.domain of all windows/frames that will communicate with each other to the same value. However, I'm not aware of any way to set this value on a document that I can't access. Is anyone aware of a way to do this - somehow set the document.domain property of this dynamically created <iframe>? Or am I not looking at it from the right angle - is there another way to achieve what I'm going for without running into this problem? I do need to use an <iframe> in any case, as the isolated/sandboxed window is crucial to the functionality of this widget. Here's my test code: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/> <title>Document.domain Test</title> <script type="text/javascript"> document.domain = 'onespot.com'; // set the page's document.domain </script> </head> <body> <p>This is a paragraph above the &lt;iframe&gt;.</p> <div id="placeholder"></div> <p>This is a paragraph below the &lt;iframe&gt;.</p> <script type="text/javascript"> var iframe = document.createElement('iframe'), doc; // create <iframe> element document.getElementById('placeholder').appendChild(iframe); // append <iframe> element to the placeholder element setTimeout(function() { // set a timeout to give browsers a chance to recognize the <iframe> doc = iframe.contentWindow || iframe.contentDocument; // get a handle on the <iframe> document alert(doc); if (doc.document) { // HEREIN LIES THE PROBLEM doc = doc.document; } doc.body.innerHTML = '<h1>Hello!</h1>'; // add an element }, 10); </script> </body> </html> I've hosted it at: http://troy.onespot.com/static/access_denied.html As you'll see if you load this page in IE, at the point that I call alert(), I do have a handle on the window object of the <iframe>; I just can't get any deeper, into its document object. Thanks very much for any help or suggestions! I'll be indebted to whomever can help me find a solution to this.

  Read the article

• Dojox grid having problem with Contentpane

  - by ice

  the grid appears properly on template's first loading. But when you click the paging button to load flooders.php thru list_result1() only the paging buttons will appear. I already tested the flooders.php outside the template and it works properly. what seems to be the problem? and what are the tools that i can use to see if the javascript is loading properly because i think the error console of ff browser which i use to track errors won't give you that much info when you are working with contentpane. thanks! ice note: below are the codes... ** from contentpane js function list_result1(){ args=""; uri = "flooders.php" + args; dojo.xhrGet( { url: uri, handleAs: "text", timeout: 500, // Time in milliseconds load: function(response, ioArgs) { //alert(response); dojo.byId("flooders_table").innerHTML = response; return response; }, // The ERROR function will be called in an error case. error: function(response, ioArgs) { console.error("HTTP status code: ", ioArgs.xhr.status); return response; } }); //end of dojo.xhrGet } **flooders.php starts here*** @import "js/dojo-0.9.0/dojo/resources/dojo.css"; @import "js/dojo-0.9.0/dijit/themes/tundra/tundra.css"; @import "js/dojo-0.9.0/dijit/themes/tundra/tundra_rtl.css"; @import "css/ash.css"; @import "js/dojo-0.9.0/dojox/grid/resources/Grid.css"; @import "js/dojo-0.9.0/dojox/grid/resources/tundraGrid.css"; @import "js/dojo-0.9.0/dojo/resources/dojo.css"; @import "js/dojo-0.9.0/dijit/tests/css/dijitTests.css"; .dojoxGridRowEditing td { background-color: #F4FFF4; } .dojoxGrid input, .dojoxGrid select, .dojoxGrid textarea { margin: 0; padding: 0; border-style: none; width: 100%; font-size: 100%; font-family: inherit; } .dojoxGrid input { } .dojoxGrid select { } .dojoxGrid textarea { } #controls { padding: 0px 0; } #controls button { margin-left: 10px; } .myGrid { width: 550px; height: 230px; margin-left: 20px; /* border: 1px solid silver; */ } echo " // it has script heading here (function(){ // some sample data // global var 'data' data = { identifier: 'id', label: 'id', items: [] }; data_list = [ $banlist ]; var rows = $listnum ; var x=1; for(var i=0, l=data_list.length; i // global var 'test_store' test_store = new dojo.data.ItemFileWriteStore({data: data}); })(); // it has ending here "; ?   -- here's the javascript dojo.require("dijit.TitlePane"); dojo.require("dijit.dijit"); dojo.require("dojox.grid.DataGrid"); dojo.require("dojo.data.ItemFileWriteStore"); dojo.require("dojo.parser"); // scan page for widgets and instantiate them dojo.require("dijit.layout.LayoutContainer"); dojo.require("dijit.layout.AccordionContainer"); dojo.require("dijit.layout.ContentPane"); dojo.require("dijit.layout.TabContainer"); dojo.require("dijit.Editor"); dojo.require("dijit._editor.plugins.AlwaysShowToolbar"); dojo.require("dijit._editor.plugins.LinkDialog"); //this must be inlcuded below function() selectCell = { styles: 'text-align: center;', type: dojox.grid.cells.Select }; gridLayout = { defaultCell: { width: 5, styles: 'text-align: right;' }, rows: [ [ { name: 'Mark', width: 3, field: 'col1', editable: true, styles: 'text-align: center;', type: dojox.grid.cells.Bool }, { name: 'Id', width: 3, field: 'id' , editable: false }, { name: 'Username', field: 'col2', editable: false, styles: '', width: '70%' }, { name: 'Reason', field: 'col3', editable: false , styles: '', width: '100%' }, { name: 'Date Banned', field: 'col4', editable: false , styles: '', width: '70%' } ] ] };

  Read the article

• ADO.NET (WCF) Data Services Query Interceptor Hangs IIS

  - by PreMagination

  I have an ADO.NET Data Service that's supposed to provide read-only access to a somewhat complex database. Logically I have table-per-type (TPT) inheritance in my data model but the EDM doesn't implement inheritance. (Limitation of EF and navigation properties on derived types. STILL not fixed in EF4!) I can query my EDM directly (using a separate project) using a copy of the query I'm trying to run against the web service, results are returned within 10 seconds. Disabling the query interceptors I'm able to make the same query against the web service, results are returned similarly quickly. I can enable some of the query interceptors and the results are returned slowly, up to a minute or so later. Alternatively, I can enable all the query interceptors, expand less of the properties on the main object I'm querying, and results are returned in a similar period of time. (I've increased some of the timeout periods) Up til this point Sql Profiler indicates the slow-down is the database. (That's a post for a different day) But when I enable all my query interceptors and expand all the properties I'd like to have the IIS worker process pegs the CPU for 20 minutes and a query is never even made against the database. This implies to me that yes, my implementation probably sucks but regardless the Data Services "tier" is having an issue it shouldn't. WCF tracing didn't reveal anything interesting to my untrained eye. Details: Data model: Agent-Person-Student Student has a collection of referrals Students and referrals are private, queries against the web service should only return "your" students and referrals. This means Person and Agent need to be filtered too. Other entities (Agent-Organization-School) can be accessed by anyone who has authenticated. The existing security model is poorly suited to perform this type of filtering for this type of data access, the query interceptors are complicated and cause EF to generate some entertaining sql queries. Sample Interceptor [QueryInterceptor("Agents")] public Expression<Func<Agent, Boolean>> OnQueryAgents() { //Agent is a Person(1), Educator(2), Student(3), or Other Person(13); allow if scope permissions exist return ag => (ag.AgentType.AgentTypeId == 1 || ag.AgentType.AgentTypeId == 2 || ag.AgentType.AgentTypeId == 3 || ag.AgentType.AgentTypeId == 13) && ag.Person.OrganizationPersons.Count<OrganizationPerson>(op => op.Organization.ScopePermissions.Any<ScopePermission> (p => p.ApplicationRoleAccount.Account.UserName == HttpContext.Current.User.Identity.Name && p.ApplicationRoleAccount.Application.ApplicationId == 124) || op.Organization.HierarchyDescendents.Any<OrganizationsHierarchy>(oh => oh.AncestorOrganization.ScopePermissions.Any<ScopePermission> (p => p.ApplicationRoleAccount.Account.UserName == HttpContext.Current.User.Identity.Name && p.ApplicationRoleAccount.Application.ApplicationId == 124))) > 0; } The query interceptors for Person, Student, Referral are all very similar, ie they traverse multiple same/similar tables to look for ScopePermissions as above. Sample Query var referrals = (from r in service.Referrals .Expand("Organization/ParentOrganization") .Expand("Educator/Person/Agent") .Expand("Student/Person/Agent") .Expand("Student") .Expand("Grade") .Expand("ProblemBehavior") .Expand("Location") .Expand("Motivation") .Expand("AdminDecision") .Expand("OthersInvolved") where r.DateCreated >= coupledays && r.DateDeleted == null select r); Any suggestions or tips would be greatly associated, for fixing my current implementation or in developing a new one, with the caveat that the database can't be changed and that ultimately I need to expose a large portion of the database via a web service that limits data access to the data authorized for, for the purpose of data integration with multiple outside parties. THANK YOU!!!

  Read the article

• Delphi 7 SOAP Authentication and SessionID HowTo

  - by Justin Philbrow

  Hello All, I am developing a 3 tier database application. 1.) MS SQL DB 2.) Middle tier SOAP Server (with Delphi 7) connected to the DB 3.) Clients (first win32 gui (with Delphi 7) - later other platfomrs) connected to the SOAP server I chose a SOAP Server to be open to various clients at a later stage (also some of the win32 gui clients will be stationed abroad - so the clients need to be thin) (this as suggested by Dr. Bob). I am new to SOAP and have been looking at different examples and papers about authentication. But cant quite get my head around it. I have made a SOAP server and client with Delphi's SOAP Server Application Wizard and added a SOAP SERVER Data Module, added a database connection and some datasets and providers. Connected the client with dbgrid etc and that part works fine. But I want the client first to login and then be able to access data and I want the server to log each connection and also when the client logs off or is disconnected, so I am guessing I need the sessionID and a timeout. I also want the server to be able to tell the clients who else is "connected" (or whos session is still active) at any given time. I have gathered that I need to make a authentication header, but cant figure out where or who I can get a sessionID. I presume that each time a client connectes to the server the server generates a sessionID? How do I get this? Any help or suggestions/pointer would be appreciated, thanks Justin OK take 2: OK, I have done the following so far (this is used from the example Bank Account SOAP application that comes with Delphi 7): procedure TForm1.btnLoginClick(Sender: TObject); var H: TAuthHeader; Headers: ISOAPHeaders; SoapData: IThorPayServerDB; begin SoapData := HTTPRIOOnForm as IThorPayServerDB; if not(SoapData.login(edtUser.Text,edtPassword.Text)) then begin showmessage('Not correct login'); exit; end; Headers := SoapData as ISoapHeaders; { Get the header from the incoming message } Headers.Get(TAuthHeader, TSoapHeader(H)); try if H < nil then begin FIdKey := H.IdNumber; FTimeStamp := H.TimeStamp; end else ShowMessage('No authentication header received from server'); finally H.Free; end; if FIdKey 0 then showmessage('Authenticated');; end; The SoapData.login returns the correct result, but for some reason I cant get hold of the header. In this case H is nil and the result becomes 'No authentication header received from server'. If I intersept the SOAP xml I can see that the header is there, here is the returned package: 1 1 4208687 2010-05-14T10:03:49.469+03:00 true Anyone any idea? In this case I am not using the SOAPConnetion that I am using for the DB, but a seperate HTTPTRIO component.

  Read the article

• Refresh QTextEdit in PyQt

  - by Mark Underwood

  Hi all, Im writing a PyQt app that takes some input in one widget, and then processes some text files. What ive got at the moment is when the user clicks the "process" button a seperate window with a QTextEdit in it pops up, and ouputs some logging messages. On Mac OS X this window is refreshed automatically and you cna see the process. On Windows, the window reports (Not Responding) and then once all the proccessing is done, the log output is shown. Im assuming I need to refresh the window after each write into the log, and ive had a look around at using a timer. etc, but havnt had much luck in getting it working. Below is the source code. It has two files, GUI.py which does all the GUI stuff and MOVtoMXF that does all the processing. GUI.py import os import sys import MOVtoMXF from PyQt4.QtCore import * from PyQt4.QtGui import * class Form(QDialog): def process(self): path = str(self.pathBox.displayText()) if(path == ''): QMessageBox.warning(self, "Empty Path", "You didnt fill something out.") return xmlFile = str(self.xmlFileBox.displayText()) if(xmlFile == ''): QMessageBox.warning(self, "No XML file", "You didnt fill something.") return outFileName = str(self.outfileNameBox.displayText()) if(outFileName == ''): QMessageBox.warning(self, "No Output File", "You didnt do something") return print path + " " + xmlFile + " " + outFileName mov1 = MOVtoMXF.MOVtoMXF(path, xmlFile, outFileName, self.log) self.log.show() rc = mov1.ScanFile() if( rc < 0): print "something happened" #self.done(0) def __init__(self, parent=None): super(Form, self).__init__(parent) self.log = Log() self.pathLabel = QLabel("P2 Path:") self.pathBox = QLineEdit("") self.pathBrowseB = QPushButton("Browse") self.pathLayout = QHBoxLayout() self.pathLayout.addStretch() self.pathLayout.addWidget(self.pathLabel) self.pathLayout.addWidget(self.pathBox) self.pathLayout.addWidget(self.pathBrowseB) self.xmlLabel = QLabel("FCP XML File:") self.xmlFileBox = QLineEdit("") self.xmlFileBrowseB = QPushButton("Browse") self.xmlLayout = QHBoxLayout() self.xmlLayout.addStretch() self.xmlLayout.addWidget(self.xmlLabel) self.xmlLayout.addWidget(self.xmlFileBox) self.xmlLayout.addWidget(self.xmlFileBrowseB) self.outFileLabel = QLabel("Save to:") self.outfileNameBox = QLineEdit("") self.outputFileBrowseB = QPushButton("Browse") self.outputLayout = QHBoxLayout() self.outputLayout.addStretch() self.outputLayout.addWidget(self.outFileLabel) self.outputLayout.addWidget(self.outfileNameBox) self.outputLayout.addWidget(self.outputFileBrowseB) self.exitButton = QPushButton("Exit") self.processButton = QPushButton("Process") self.buttonLayout = QHBoxLayout() #self.buttonLayout.addStretch() self.buttonLayout.addWidget(self.exitButton) self.buttonLayout.addWidget(self.processButton) self.layout = QVBoxLayout() self.layout.addLayout(self.pathLayout) self.layout.addLayout(self.xmlLayout) self.layout.addLayout(self.outputLayout) self.layout.addLayout(self.buttonLayout) self.setLayout(self.layout) self.pathBox.setFocus() self.setWindowTitle("MOVtoMXF") self.connect(self.processButton, SIGNAL("clicked()"), self.process) self.connect(self.exitButton, SIGNAL("clicked()"), self, SLOT("reject()")) self.ConnectButtons() class Log(QTextEdit): def __init__(self, parent=None): super(Log, self).__init__(parent) self.timer = QTimer() self.connect(self.timer, SIGNAL("timeout()"), self.updateText()) self.timer.start(2000) def updateText(self): print "update Called" AND MOVtoMXF.py import os import sys import time import string import FileUtils import shutil import re class MOVtoMXF: #Class to do the MOVtoMXF stuff. def __init__(self, path, xmlFile, outputFile, edit): self.MXFdict = {} self.MOVDict = {} self.path = path self.xmlFile = xmlFile self.outputFile = outputFile self.outputDirectory = outputFile.rsplit('/',1) self.outputDirectory = self.outputDirectory[0] sys.stdout = OutLog( edit, sys.stdout) class OutLog(): def __init__(self, edit, out=None, color=None): """(edit, out=None, color=None) -> can write stdout, stderr to a QTextEdit. edit = QTextEdit out = alternate stream ( can be the original sys.stdout ) color = alternate color (i.e. color stderr a different color) """ self.edit = edit self.out = None self.color = color def write(self, m): if self.color: tc = self.edit.textColor() self.edit.setTextColor(self.color) #self.edit.moveCursor(QtGui.QTextCursor.End) self.edit.insertPlainText( m ) if self.color: self.edit.setTextColor(tc) if self.out: self.out.write(m) self.edit.show() If any other code is needed (i think this is all that is needed) then just let me know. Any Help would be great. Mark

  Read the article

• What is the reason of "Transaction context in use by another session"

  - by Shrike

  Hi, I'm looking for a description of the root of this error: "Transaction context in use by another session". I get it sometimes in one of my unittests so I can't provider repro code. But I wonder what is "by design" reason for the error. I've found this post: http://blogs.msdn.com/asiatech/archive/2009/08/10/system-transaction-may-fail-in-multiple-thread-environment.aspx and also that: http://msdn.microsoft.com/en-us/library/ff649002.aspx But I can't understand what "Multiple threads sharing the same transaction in a transaction scope will cause the following exception: 'Transaction context in use by another session.' " means. All words are understandable but not the point. I actually can share a system transaction between threads. And there is even special mechanism for this - DependentTransaction class and Transaction.DependentClone method. I'm trying to reproduce a usecase from the first post: 1. Main thread creates DTC transaction, receives DependentTransaction (created using Transaction.Current.DependentClone on the main thread 2. Child thread 1 enlists in this DTC transaction by creating a transaction scope based on the dependent transaction (passed via constructor) 3. Child thread 1 opens a connection 4. Child thread 2 enlists in DTC transaction by creating a transaction scope based on the dependent transaction (passed via constructor) 5. Child thread 2 opens a connection with such code: using System; using System.Threading; using System.Transactions; using System.Data; using System.Data.SqlClient; public class Program { private static string ConnectionString = "Initial Catalog=DB;Data Source=.;User ID=user;PWD=pwd;"; public static void Main() { int MAX = 100; for(int i =0; i< MAX;i++) { using(var ctx = new TransactionScope()) { var tx = Transaction.Current; // make the transaction distributed using (SqlConnection con1 = new SqlConnection(ConnectionString)) using (SqlConnection con2 = new SqlConnection(ConnectionString)) { con1.Open(); con2.Open(); } showSysTranStatus(); DependentTransaction dtx = Transaction.Current.DependentClone(DependentCloneOption.BlockCommitUntilComplete); Thread t1 = new Thread(o => workCallback(dtx)); Thread t2 = new Thread(o => workCallback(dtx)); t1.Start(); t2.Start(); t1.Join(); t2.Join(); ctx.Complete(); } trace("root transaction completes"); } } private static void workCallback(DependentTransaction dtx) { using(var txScope1 = new TransactionScope(dtx)) { using (SqlConnection con2 = new SqlConnection(ConnectionString)) { con2.Open(); trace("connection opened"); showDbTranStatus(con2); } txScope1.Complete(); } trace("dependant tran completes"); } private static void trace(string msg) { Console.WriteLine(Thread.CurrentThread.ManagedThreadId + " : " + msg); } private static void showSysTranStatus() { string msg; if (Transaction.Current != null) msg = Transaction.Current.TransactionInformation.DistributedIdentifier.ToString(); else msg = "no sys tran"; trace( msg ); } private static void showDbTranStatus(SqlConnection con) { var cmd = con.CreateCommand(); cmd.CommandText = "SELECT 1"; var c = cmd.ExecuteScalar(); trace("@@TRANCOUNT = " + c); } } It fails on Complete's call of root TransactionScope. But error is different: Unhandled Exception: System.Transactions.TransactionInDoubtException: The transaction is in doubt. --- pired. The timeout period elapsed prior to completion of the operation or the server is not responding. To sum up: I want to understand what "Transaction context in use by another session" means and how to reproduce it.

  Read the article

• .NET 4.0 Dynamic object used statically?

  - by Kevin Won

  I've gotten quite sick of XML configuration files in .NET and want to replace them with a format that is more sane. Therefore, I'm writing a config file parser for C# applications that will take a custom config file format, parse it, and create a Python source string that I can then execute in C# and use as a static object (yes that's right--I want a static (not the static type dyanamic) object in the end). Here's an example of what my config file looks like: // my custom config file format GlobalName: ExampleApp Properties { ExternalServiceTimeout: "120" } Python { // this allows for straight python code to be added to handle custom config def MyCustomPython: return "cool" } Using ANTLR I've created a Lexer/Parser that will convert this format to a Python script. So assume I have that all right and can take the .config above and run my Lexer/Parser on it to get a Python script out the back (this has the added benefit of giving me a validation tool for my config). By running the resultant script in C# // simplified example of getting the dynamic python object in C# // (not how I really do it) ScriptRuntime py = Python.CreateRuntime(); dynamic conf = py.UseFile("conftest.py"); dynamic t = conf.GetConfTest("test"); I can get a dynamic object that has my configuration settings. I can now get my config file settings in C# by invoking a dynamic method on that object: //C# calling a method on the dynamic python object var timeout = t.GetProperty("ExternalServiceTimeout"); //the config also allows for straight Python scripting (via the Python block) var special = t.MyCustonPython(); of course, I have no type safety here and no intellisense support. I have a dynamic representation of my config file, but I want a static one. I know what my Python object's type is--it is actually newing up in instance of a C# class. But since it's happening in python, it's type is not the C# type, but dynamic instead. What I want to do is then cast the object back to the C# type that I know the object is: // doesn't work--can't cast a dynamic to a static type (nulls out) IConfigSettings staticTypeConfig = t as IConfigSettings Is there any way to figure out how to cast the object to the static type? I'm rather doubtful that there is... so doubtful that I took another approach of which I'm not entirely sure about. I'm wondering if someone has a better way... So here's my current tactic: since I know the type of the python object, I am creating a C# wrapper class: public class ConfigSettings : IConfigSettings that takes in a dynamic object in the ctor: public ConfigSettings(dynamic settings) { this.DynamicProxy = settings; } public dynamic DynamicProxy { get; private set; } Now I have a reference to the Python dynamic object of which I know the type. So I can then just put wrappers around the Python methods that I know are there: // wrapper access to the underlying dynamic object // this makes my dynamic object appear 'static' public string GetSetting(string key) { return this.DynamicProxy.GetProperty(key).ToString(); } Now the dynamic object is accessed through this static proxy and thus can obviously be passed around in the static C# world via interface, etc: // dependency inject the dynamic object around IBusinessLogic logic = new BusinessLogic(IConfigSettings config); This solution has the benefits of all the static typing stuff we know and love while at the same time giving me the option of 'bailing out' to dynamic too: // the DynamicProxy property give direct access to the dynamic object var result = config.DynamicProxy.MyCustomPython(); but, man, this seems rather convoluted way of getting to an object that is a static type in the first place! Since the whole dynamic/static interaction world is new to me, I'm really questioning if my solution is optimal or if I'm missing something (i.e. some way of casting that dynamic object to a known static type) about how to bridge the chasm between these two universes.

  Read the article

• Getting java.lang.ClassNotFoundException: com.mysql.jdbc.Driver Exception

  - by Yashwant Chavan

  Hi , I am getting Following Exception while configuring the Connection Pool in Tomcat This is Context.xml <Context path="/DBTest" docBase="DBTest" debug="5" reloadable="true" crossContext="true"> <!-- maxActive: Maximum number of dB connections in pool. Make sure you configure your mysqld max_connections large enough to handle all of your db connections. Set to -1 for no limit. --> <!-- maxIdle: Maximum number of idle dB connections to retain in pool. Set to -1 for no limit. See also the DBCP documentation on this and the minEvictableIdleTimeMillis configuration parameter. --> <!-- maxWait: Maximum time to wait for a dB connection to become available in ms, in this example 10 seconds. An Exception is thrown if this timeout is exceeded. Set to -1 to wait indefinitely. --> <!-- username and password: MySQL dB username and password for dB connections --> <!-- driverClassName: Class name for the old mm.mysql JDBC driver is org.gjt.mm.mysql.Driver - we recommend using Connector/J though. Class name for the official MySQL Connector/J driver is com.mysql.jdbc.Driver. --> <!-- url: The JDBC connection url for connecting to your MySQL dB. --> <Resource name="jdbc/TestDB" auth="Container" type="javax.sql.DataSource" maxActive="100" maxIdle="30" maxWait="10000" username="root" password="password" driverClassName="com.mysql.jdbc.Driver" url="jdbc:mysql:///BUSINESS"/> </Context> This is Bean Entry <bean id="dataSource" class="org.springframework.jndi.JndiObjectFactoryBean"> <property name="jndiName" value="jdbc/TestDB"></property> <property name="resourceRef" value="true"></property> </bean> org.springframework.jdbc.CannotGetJdbcConnectionException: Could not get JDBC Co nnection; nested exception is org.apache.tomcat.dbcp.dbcp.SQLNestedException: Ca nnot load JDBC driver class 'com.mysql.jdbc.Driver' at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(Dat aSourceUtils.java:82) at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java: 382) at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:45 8) at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:46 6) at com.businesscaliber.dao.Dao.getQueryForListMap(Dao.java:66) at com.businesscaliber.dao.MiscellaneousDao.getDefaultSucessStory(Miscel laneousDao.java:109) at com.businesscaliber.listeners.BusinessContextLoader.contextInitialize d(BusinessContextLoader.java:40) at org.apache.catalina.core.StandardContext.listenerStart(StandardContex t.java:3795) at org.apache.catalina.core.StandardContext.start(StandardContext.java:4 252) at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase .java:760) at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:74 0) at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:544) at org.apache.catalina.startup.HostConfig.deployWAR(HostConfig.java:831) at org.apache.catalina.startup.HostConfig.deployWARs(HostConfig.java:720 ) at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:490 ) at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1150) at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java :311) at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(Lifecycl eSupport.java:120) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1022) at org.apache.catalina.core.StandardHost.start(StandardHost.java:736) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014) at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443 ) at org.apache.catalina.core.StandardService.start(StandardService.java:4 48) at org.apache.catalina.core.StandardServer.start(StandardServer.java:700 ) at org.apache.catalina.startup.Catalina.start(Catalina.java:552) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl. java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces sorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433) Caused by: org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot load JDBC driv er class 'com.mysql.jdbc.Driver' at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDat aSource.java:1136) at org.apache.tomcat.dbcp.dbcp.BasicDataSource.getConnection(BasicDataSo urce.java:880) at org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection(D ataSourceUtils.java:113) at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(Dat aSourceUtils.java:79) ... 30 more Caused by: java.lang.ClassNotFoundException: com.mysql.jdbc.Driver at java.net.URLClassLoader$1.run(URLClassLoader.java:200) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at java.lang.ClassLoader.loadClass(ClassLoader.java:251) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319) at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:164) at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDat aSource.java:1130)

  Read the article

• xamlparser error after clickonce deployment.Application crashing after installation

  - by black sensei

  Hello Good People, I've built an WPF application with visual studio 2008 and created an installer for it.Works fine so far.I realized it lacks the automatic updates feature, and after trying several solutions, i decided to give a try to clickonce deployment.After a successful deployment on a network server, i 've noticed that the application crashes after installation of the downloaded app.It complains about this: Cannot create instance of 'Login' defined in assembly 'MyApplication, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null'. Exception has been thrown by the target of an invocation. Error in markup file 'MyApplication;component/login.xaml' Line 1 Position 9. here is the stacktrace at System.Windows.Markup.XamlParseException.ThrowException(String message, Exception innerException, Int32 lineNumber, Int32 linePosition, Uri baseUri, XamlObjectIds currentXamlObjectIds, XamlObjectIds contextXamlObjectIds, Type objectType) at System.Windows.Markup.XamlParseException.ThrowException(ParserContext parserContext, Int32 lineNumber, Int32 linePosition, String message, Exception innerException) at System.Windows.Markup.BamlRecordReader.ThrowExceptionWithLine(String message, Exception innerException) at System.Windows.Markup.BamlRecordReader.CreateInstanceFromType(Type type, Int16 typeId, Boolean throwOnFail) at System.Windows.Markup.BamlRecordReader.GetElementAndFlags(BamlElementStartRecord bamlElementStartRecord, Object& element, ReaderFlags& flags, Type& delayCreatedType, Int16& delayCreatedTypeId) at System.Windows.Markup.BamlRecordReader.BaseReadElementStartRecord(BamlElementStartRecord bamlElementRecord) at System.Windows.Markup.BamlRecordReader.ReadElementStartRecord(BamlElementStartRecord bamlElementRecord) at System.Windows.Markup.BamlRecordReader.ReadRecord(BamlRecord bamlRecord) at System.Windows.Markup.BamlRecordReader.Read(Boolean singleRecord) at System.Windows.Markup.TreeBuilderBamlTranslator.ParseFragment() at System.Windows.Markup.TreeBuilder.Parse() at System.Windows.Markup.XamlReader.LoadBaml(Stream stream, ParserContext parserContext, Object parent, Boolean closeStream) at System.Windows.Application.LoadBamlStreamWithSyncInfo(Stream stream, ParserContext pc) at System.Windows.Application.LoadComponent(Uri resourceLocator, Boolean bSkipJournaledProperties) at System.Windows.Application.DoStartup() at System.Windows.Application.<.ctorb__0(Object unused) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter) at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler) at System.Windows.Threading.Dispatcher.WrappedInvoke(Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler) at System.Windows.Threading.DispatcherOperation.InvokeImpl() at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(Object state) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Windows.Threading.DispatcherOperation.Invoke() at System.Windows.Threading.Dispatcher.ProcessQueue() at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter) at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler) at System.Windows.Threading.Dispatcher.WrappedInvoke(Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler) at System.Windows.Threading.Dispatcher.InvokeImpl(DispatcherPriority priority, TimeSpan timeout, Delegate method, Object args, Boolean isSingleParameter) at System.Windows.Threading.Dispatcher.Invoke(DispatcherPriority priority, Delegate method, Object arg) at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam) at MS.Win32.UnsafeNativeMethods.DispatchMessage(MSG& msg) at System.Windows.Threading.Dispatcher.PushFrameImpl(DispatcherFrame frame) at System.Windows.Threading.Dispatcher.PushFrame(DispatcherFrame frame) at System.Windows.Threading.Dispatcher.Run() at System.Windows.Application.RunDispatcher(Object ignore) at System.Windows.Application.RunInternal(Window window) at System.Windows.Application.Run(Window window) at System.Windows.Application.Run() at myApplication.App.Main() here is just the region the debugger is pointing to <Window x:Class="MyApplication.Login" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:src="clr-namespace:MyApplication" xmlns:UI="clr-namespace:UI;assembly=UI" Title="My Application" Height="400" Width="550" ResizeMode="NoResize" WindowStyle="ThreeDBorderWindow" WindowStartupLocation="CenterScreen" Name="Logine" Loaded="Logine_Loaded" Closed="Logine_Closed" Icon="orLogo.ico"> But the installer version as in the msi from setup project works fine.so i cannot see where the error is comming from since i can have design view. Question 1 : Does any one have a similar issue, or is that a known issue? Question 2 : If it's a known issue then what are alternative.I might give up on the clickonce but then i my automatic update feature will be lost (as in there is none which is not ovekill or seriously outdated that i can find right now). thanks for reading this and for pointing me to the right direction.

  Read the article

• Can't get heroku work with rails 3.x postgresql

  - by framomo86

  I followed Heroku official guides to push rails project to heroku. The application.rb file is ok, I added pg gem and database.yml in the right way. When I push to heroku I get: -----> Preparing app for Rails asset pipeline Detected manifest.yml, assuming assets were compiled locally But when I open heroku via heroku open I get an error. I put heroku logs and get this. Started GET "/" for 93.45.227.255 at 2012-10-11 13:28:04 +0000 2012-10-11T13:28:04+00:00 app[web.1]: Processing by ProductsController#index as HTML 2012-10-11T13:28:04+00:00 app[web.1]: : SELECT a.attname, format_type(a.atttypid, a.atttypmod), d.adsrc, a.attnotnull 2012-10-11T13:28:04+00:00 app[web.1]: ActiveRecord::StatementInvalid (PG::Error: ERROR: relation "products" does not exist 2012-10-11T13:28:04+00:00 app[web.1]: LINE 4: WHERE a.attrelid = '"products"'::regclass 2012-10-11T13:28:04+00:00 heroku[router]: GET gift4.herokuapp.com/ dyno=web.1 queue=0 wait=0ms service=203ms status=500 bytes=643 2012-10-11T13:28:04+00:00 app[web.1]: ): 2012-10-11T13:28:04+00:00 app[web.1]: ON a.attrelid = d.adrelid AND a.attnum = d.adnum 2012-10-11T13:28:04+00:00 app[web.1]: 2012-10-11T13:28:04+00:00 app[web.1]: 2012-10-11T13:28:04+00:00 app[web.1]: ^ 2012-10-11T13:28:04+00:00 app[web.1]: 2012-10-11T13:28:04+00:00 app[web.1]: Completed 500 Internal Server Error in 72ms 2012-10-11T13:28:04+00:00 app[web.1]: FROM pg_attribute a LEFT JOIN pg_attrdef d 2012-10-11T13:28:04+00:00 app[web.1]: WHERE a.attrelid = '"products"'::regclass 2012-10-11T13:28:04+00:00 app[web.1]: AND a.attnum > 0 AND NOT a.attisdropped 2012-10-11T13:28:04+00:00 app[web.1]: ORDER BY a.attnum 2012-10-11T13:28:04+00:00 app[web.1]: app/controllers/products_controller.rb:5:in `index' 2012-10-11T13:28:04+00:00 heroku[router]: GET gift4.herokuapp.com/favicon.ico d So I tried heroku run rake db:reset And get this Heroku client internal error. ! Search for help at: https://help.heroku.com ! Or report a bug at: https://github.com/heroku/heroku/issues/new Error: Operation timed out - connect(2) (Errno::ETIMEDOUT) Backtrace: /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/client/rendezvous.rb:39:in `initialize' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/client/rendezvous.rb:39:in `open' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/client/rendezvous.rb:39:in `block in start' /Users/francescochecco/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/timeout.rb:68:in `timeout' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/client/rendezvous.rb:31:in `start' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/command/run.rb:125:in `rendezvous_session' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/command/run.rb:112:in `run_attached' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/command/run.rb:21:in `index' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/command.rb:206:in `run' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/lib/heroku/cli.rb:28:in `start' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/gems/heroku-2.32.6/bin/heroku:16:in `<top (required)>' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/bin/heroku:19:in `load' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/bin/heroku:19:in `<main>' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/bin/ruby_noexec_wrapper:14:in `eval' /Users/francescochecco/.rvm/gems/ruby-1.9.3-p194/bin/ruby_noexec_wrapper:14:in `<main>' Command: heroku run rake db:reset Version: heroku-gem/2.32.6 (x86_64-darwin11.3.0) ruby/1.9.3 autoupdate I tried everything. Anyone could help?

  Read the article

• Web service using Data Dynamics ActiveReports occasionally slows down

  - by Swoop

  My company is running into a problem with a web service that is written in C#/ASP.Net. The service receives an identity key for data in SQL Server and a path to generate and save a PDF report for this data. In most cases, this web service returns results to the calling web pages very quickly, usually within a few seconds max. However, it seems to occasionally hit a significant slowdown. The web application calling the web service will generate a timeout error when this slowdown occurs. We have checked and the PDF does get created and saved to the server, so it looks like the web service eventually finishes executing. It seems to take about 1 to 2 minutes for processing to have completed. The PDF is generated using ActiveReports from Data Dynamics. Wwhen this problem occurs, making a small change to the web service's config file (ie, adding a blank space to a connection string line) seems to restart the web service and everything is perfectly ok for a period of time afterwards. Other web applications that are running on the same web server do not seem to experience this type of behavior, only this particular web service. I have added the code for the web service below. It is basic calls to 3rd party libraries. We are not able to recreate this problem in test. I am wondering what might be causing this issue? [WebMethod] public string Publish(int identity, string transactionType, string directory, string filename) { try { AdpConnection Conn = new AdpConnection(ConfigurationManager.AppSettings["myDBConnString"]); AdpCommand Cmd = new AdpCommand("storedproc_GetData", oConn); AdpParameter Param; Cmd.CommandType = CommandType.StoredProcedure; Param = Cmd.CreateParameter("@Identity", DbType.Int32); Param.Value = identity; Cmd.Parameters.Add(oParam); Conn.Open(); string aResponse = Cmd.ExecuteScalar().ToString(); Conn.Close(); if (transactionType == "typeA") { //Parse response DataSet dsResponse = ParseDataResponse(aResponse); //dsResponse.WriteXml(@ConfigurationManager.AppSettings["DocsDir"] + identity.ToString() + ".xml"); DataDynamics.ActiveReports.ActiveReport3 rpt = new DataDynamics.ActiveReports.ActiveReport3(); rpt.LoadLayout(@ConfigurationManager.AppSettings["myReportPath"] + "TypeA.rpx"); rpt.AddNamedItem("ReportPath", @ConfigurationManager.AppSettings["myReportPath"]); rpt.AddNamedItem("XMLSTRING", FormatXML(dsResponse.GetXml())); DataDynamics.ActiveReports.DataSources.XMLDataSource xmlds = new DataDynamics.ActiveReports.DataSources.XMLDataSource(); xmlds.FileURL = null; xmlds.RecordsetPattern = "//DataPatternA"; xmlds.LoadXML(FormatXML(dsResponse.GetXml())); if (!System.IO.Directory.Exists(@ConfigurationManager.AppSettings["DocsDir"] + directory + @"\")) { System.IO.Directory.CreateDirectory(@ConfigurationManager.AppSettings["DocsDir"] + directory + @"\"); } string sXML = FormatXML(dsResponse.GetXml()); StreamWriter sw = new StreamWriter(@ConfigurationManager.AppSettings["DocsDir"] + directory + @"\" + filename + ".xml", false); sw.Write(sXML); sw.Close(); rpt.DataSource = xmlds; rpt.Run(true); DataDynamics.ActiveReports.Export.Pdf.PdfExport xPdf = new DataDynamics.ActiveReports.Export.Pdf.PdfExport(); xPdf.Export(rpt.Document, @ConfigurationManager.AppSettings["DocsDir"] + directory + @"\" + filename + ".pdf"); } } catch(Exception ex) { return "Error: " + ex.ToString(); } return @ConfigurationManager.AppSettings["DocsDir"] + directory + @"\" + filename + ".pdf"; }

  Read the article

< Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >