Search Results

Search found 8396 results on 336 pages for 'ui gyun jeong'.

Page 130/336 | < Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >

• (nested) user controls within a mvp pattern causing sporadic problems

  - by LLEA

  hi everyone, I have a serious problem with nested user controls (UCs) in WinForms while trying to implement the mvp pattern (passive view). The project consists of one model (designed as a singleton) and a set of different presenters with corresponding view interfaces. To avoid one huge view interface and therefore an overloaded main UI, I decided to make use of a set of different UCs. Each UC has one view interface and one presenter that can access the model. But there are nested UCs: meaning that one specialised UC implements sort of a basic UC. The main UI just represents a container for all those UCs. So far, so good (if not, please ask)?! There are two problems that I am facing now (but I guess both are of the same origin): From time to time it is not possible anymore to load the UCs and test them within the Visual Studio 2008 User Control Test Container. The error message just says that a project with an output type of class library cannot be started directly etc. I can "handle" that by unloading all UC projects and reloading them afterwards. (I guess the references to all mvp components and other UCs are then updated). Assuming that the implementation of my mvp pattern is okay and all those UCs are testable within the VS Test Container at a certain time - there is the biggest problem still left: I am not able to add any UC (even the basic and unnested ones) to a simple Form (UI). The error message: error message.jpg Could it be that my basic UC causes all these Problems?! It consists of two simple ComboBoxes and implements a basic presenter and basic view interface. Whenever I add this UC to a different UC the VS designer adds two references to the public getter methods of the UC as resources. I then manually remove those resources from the resx-file and commend the corresponding lines in the designer file. thx in advance

  Read the article

• ISO C++ forbids declaration of 'QPushButton' with no type in QT Creator

  - by Mohit Deshpande

  I am running QT Creator on a Linux Ubuntu 9.10 machine. I just got started with QT Creator, and I was going through the tutorials when this error popped up while I was trying to build my project: "ISO C++ forbids declaration of 'QPushButton' with no type". This problem appears in my header file: #ifndef MAINWINDOW_H #define MAINWINDOW_H #include <QtGui/QWidget> namespace Ui { class MainWindow; } class MainWindow : public QWidget { Q_OBJECT public: MainWindow(QWidget *parent = 0); ~MainWindow(); public slots: void addContact(); void submitContact(); void cancel(); private: Ui::MainWindow *ui; QPushButton *addButton; QPushButton *submitButton; QPushButton *cancelButton; QLineEdit *nameLine; QTextEdit *addressText; QMap<QString, QString> contacts; QString oldName; QString oldAddress; }; #endif // MAINWINDOW_H

  Read the article

• Boost Binary Endian parser not working?

  - by Hai

  I am studying how to use boost spirit Qi binary endian parser. I write a small test parser program according to here and basics examples, but it doesn't work proper. It gave me the msg:"Error:no match". Here is my code. #include "boost/spirit/include/qi.hpp" #include "boost/spirit/include/phoenix_core.hpp" #include "boost/spirit/include/phoenix_operator.hpp" #include "boost/spirit/include/qi_binary.hpp" // parsing binary data in various endianness template '<'typename P, typename T void binary_parser( char const* input, P const& endian_word_type, T& voxel, bool full_match = true) { using boost::spirit::qi::parse; char const* f(input); char const* l(f + strlen(f)); bool result1 = parse(f,l,endian_word_type,voxel); bool result2 =((!full_match) || (f ==l)); if ( result1 && result2) { //doing nothing, parsing data is pass to voxel alreay } else { std::cerr << "Error: not match!!" << std::endl; exit(1); } } typedef boost::uint16_t bs_int16; typedef boost::uint32_t bs_int32; int main ( int argc, char *argv[] ) { namespace qi = boost::spirit::qi; namespace ascii = boost::spirit::ascii; using qi::big_word; using qi::big_dword; boost::uint32_t ui; float uf; binary_parser("\x01\x02\x03\x04",big_word,ui); assert(ui=0x01020304); binary_parser("\x01\x02\x03\x04",big_word,uf); assert(uf=0x01020304); return 0; }' I almost copy the example, but why this binary parser doesn't work. I use Mac OS 10.5.8 and gcc 4.01 compiler.

  Read the article

• How to enter text into the "Write something..." box on Facebook and click Submit

  - by Peter Payne

  Hello, I am trying to manipulate Facebook pages in various ways, using Javascript browser elements. I'd need to be able to insert some text into the top "Type something..." box that shows on my site's fan page (or alternately, "click into" the field and I can type the text using GUI scripting), then click the "submit" button as if i'd done it by hand. It's tricky since the page is very Ajax heavy and I can't find the names of the elements I need to manipulate, let alone how to manipulate them as they're not using traditional form fields I'm used to. Can anyone help me figure out how to do this with javascript commands, which I'd be calling from Applescript on the Mac? Many thanks in advance. UPDATE Thanks for the comments below. Believe me, I am not trying to do anything spammy or douchy, mainly posting links to products that have gone live on page facebook page, but do it during the business day when people are on rather than at strange hours of the day. I am located in Japan so my sleep period is right when people are using FB. The solution I came up with for clicking the button was got using UI Browser, an outstanding tool if you're trying to script on the Mac. The script that clicked the button for me was: tell application "Safari" activate set thename to name of (get current tab of window 1) delay 3 tell application "System Events" tell process "Safari" try click button "Share" of group 1 of group 2 of list 3 of group 9 of UI element 1 of scroll area 1 of group 3 of window thename -- this one works on the mini? on error click button "Share" of group 1 of group 2 of list 3 of group 9 of UI element 1 of scroll area 1 of group 2 of window thename -- did not work end try end tell end tell end tell Hope this is useful to anyone.

  Read the article

• Making a database backup to SDCard on Android

  - by Pentium10

  I am using the below code to write a backup copy to SDCard and I get java.io.IOException: Parent directory of file is not writable: /sdcard/mydbfile.db private class ExportDatabaseFileTask extends AsyncTask<String, Void, Boolean> { private final ProgressDialog dialog = new ProgressDialog(ctx); // can use UI thread here protected void onPreExecute() { this.dialog.setMessage("Exporting database..."); this.dialog.show(); } // automatically done on worker thread (separate from UI thread) protected Boolean doInBackground(final String... args) { File dbFile = new File(Environment.getDataDirectory() + "/data/com.mypkg/databases/mydbfile.db"); File exportDir = new File(Environment.getExternalStorageDirectory(), ""); if (!exportDir.exists()) { exportDir.mkdirs(); } File file = new File(exportDir, dbFile.getName()); try { file.createNewFile(); this.copyFile(dbFile, file); return true; } catch (IOException e) { Log.e("mypck", e.getMessage(), e); return false; } } // can use UI thread here protected void onPostExecute(final Boolean success) { if (this.dialog.isShowing()) { this.dialog.dismiss(); } if (success) { Toast.makeText(ctx, "Export successful!", Toast.LENGTH_SHORT).show(); } else { Toast.makeText(ctx, "Export failed", Toast.LENGTH_SHORT).show(); } } void copyFile(File src, File dst) throws IOException { FileChannel inChannel = new FileInputStream(src).getChannel(); FileChannel outChannel = new FileOutputStream(dst).getChannel(); try { inChannel.transferTo(0, inChannel.size(), outChannel); } finally { if (inChannel != null) inChannel.close(); if (outChannel != null) outChannel.close(); } } }

  Read the article

• How to use data receive event in Socket class?

  - by affan

  I have wrote a simple client that use TcpClient in dotnet to communicate. In order to wait for data messages from server i use a Read() thread that use blocking Read() call on socket. When i receive something i have to generate various events. These event occur in the worker thread and thus you cannot update a UI from it directly. Invoke() can be use but for end developer its difficult as my SDK would be use by users who may not use UI at all or use Presentation Framework. Presentation framework have different way of handling this. Invoke() on our test app as Microstation Addin take a lot of time at the moment. Microstation is single threaded application and call invoke on its thread is not good as it is always busy doing drawing and other stuff message take too long to process. I want my events to generate in same thread as UI so user donot have to go through the Dispatcher or Invoke. Now i want to know how can i be notified by socket when data arrive? Is there a build in callback for that. I like winsock style receive event without use of separate read thread. I also do not want to use window timer to for polling for data. I found IOControlCode.AsyncIO flag in IOControl() function which help says Enable notification for when data is waiting to be received. This value is equal to the Winsock 2 FIOASYNC constant. I could not found any example on how to use it to get notification. If i am write in MFC/Winsock we have to create a window of size(0,0) which was just used for listening for the data receive event or other socket events. But i don't know how to do that in dotnet application.

  Read the article

• problem with QPropertyAnimation in Qt

  - by belhaouary

  Hi , i have a problem with QPropertyAnimation in Qt my code: QString my_text = "Hello Animation"; ui->textBrowser->setText((quote_text)); ui->textBrowser->show(); QPropertyAnimation animation2(ui->textBrowser,"geometry"); animation2.setDuration(1000); animation2.setStartValue(QRect(10,220/4,1,1)); animation2.setEndValue(QRect(10,220,201,71)); animation2.setEasingCurve(QEasingCurve::OutBounce); animation2.start(); till now it seems very good , but the problem is that i can see this animation only when i show a message box after it . QMessageBox m; m.setGeometry(QRect(100,180,100,50)); m.setText("close quote"); m.show(); m.exec(); when i remove the code of this message box , i can't see the animation anymore. the functionality of the program doesn't require showing this MessageBox at all. Can anybody help?

  Read the article

• How can i iterate through QListWidget items and work with each item?

  - by Hossein

  In CSharp its as simple as writting : listBox1.Items.Add("Hello"); listBox1.Items.Add("There"); foreach (string item in listBox1.Items ) { MessageBox.Show(item.ToString()); } and i can easily add different objects to a list box and then retrieve them using foreach. I tried the same approach in Qt 4.8.2 but it seems they are different.though they look very similar at first.I found that Qt supports foreach so i went on and tried something like : foreach(QListWidgetItem& item,ui->listWidget->items()) { item.setTextColor(QColor::blue()); } which failed clearly.It says the items() needs a parameter which confuses me.I am trying to iterate through the ListBox itself, so what does this mean? I tried passing the ListBox object as the parameter itself this again failed too: foreach(QListWidgetItem& item,ui->listWidget->items(ui->listWidget)) { item.setTextColor(QColor::blue()); } So here are my questions: How can I iterate through a QListWidget items in Qt? Can i store objects as items in QListWidgets like C#? How can i convert an object in QListWidgets to string(C#s ToString counter part in Qt) ? (suppose i want to use a QMessagBox instead of that setTextColor and want to print out all string items in the QlistWidget.)

  Read the article

• angular bootstrap typeahead bug

  - by Mohammad Akbari

  i use angular bootstrap typeahead (this lib ui-bootstrap-tpls.js ) in my app, when use two typeahead in one scope, only one work well, and other not work, this is my code angular.module('plunker', ['ui.bootstrap']); function TypeaheadCtrl($scope) { $scope.selected = undefined; $scope.selected2 = undefined; $scope.states = ['Alabama', 'Alaska','California', 'Hawaii', 'Wisconsin', 'Wyoming']; } <html ng-app="plunker"> <head> <title></title> <link href="lib/angular-bootstrap/bootstrap.css" rel="stylesheet" /> <script src="lib/angular/angular.js"></script> <script src="lib/angular-bootstrap/ui-bootstrap-tpls-0.3.0.min.js"></script> <script src="app.js"></script> </head> <body> <div class='container-fluid' ng-controller="TypeaheadCtrl"> <pre>Model: {{selected| json}}</pre> <input type="text" ng-model="selected" typeahead="state for state in states | filter:$viewValue"> <input type="text" ng-model="selected2" typeahead="state for state in states | filter:$viewValue"> </div> </body> please check this and help.

  Read the article

• How can I format Custom Data and display in autocomplete when source is an DB

  - by Andres Scarpone

  so I'm trying to get some info in the auto-complete widget like it's shown in the JQuery UI demo Demo, the only problem is they use a variable that they fill with the data they want to show, I instead want to access the data and the different description and stuff using a Data Base in MySQL, for this I have changed the source to use another php page that looks up the info. here is the code for the Auto-complete, I really don't understand the methods so I haven't changed it from the basic search. This is the JS: $(document).ready((function(){ $( "#completa" ).autocomplete({ source: "buscar.php", minLength: 1, focus: function (event, ui){ $("#completa").val(ui.item.val); return false; }; })); This is what I have in buscar.php: <?php $conec = mysql_connect(localhost, root, admin); if(!$conec) { die(mysql_error()); } else { $bd = mysql_select_db("ve_test",$conec ); if(!$bd) { die(mysql_error()); } } $termino = trim(strip_tags($_GET['term']));//Obtener el termino que envia el autocompletar $qstring = "SELECT name, descripcion FROM VE_table WHERE name LIKE '%".$termino."%'"; $result = mysql_query($qstring);//Solicitud a la Base de Datos while ($row = mysql_fetch_array($result,MYSQL_ASSOC))//Realizar un LOOP sobre los valores obtenidos { $row['value']=htmlentities(stripslashes($row['name'])); $row_set[] = $row;//build an array } echo json_encode($row_set);//Enviar los datos al autocompletar en codificacion JSON, Altamente Necesario. ?

  Read the article

• QT NOOB: Add action handler for multiple objects of same type.

  - by what

  I have a simple QT application with 10 radio buttons with names radio_1 through radio_10. It is a ui called Selector, and is part of a class called TimeSelector In my header file for this design, i have this: //! [1] class TimeSelector : public QWidget { Q_OBJECT public: TimeSelector(QWidget *parent = 0); private slots: //void on_inputSpinBox1_valueChanged(int value); //void on_inputSpinBox2_valueChanged(int value); private: Ui::Selector ui; }; //! [1] the commented out void_on_inputSpinBox1_valueChanged(int value) is from the tutorial for the simple calculator. I know i can do: void on_radio_1_valueChanged(int value); but I would need 10 functions. I want to be able to make one function that works for everything, and lets me pass in maybe a name of the radio button that called it, or a reference to the radio button so i can work with it and determine who it was. I am very new to QT but this seems like it should be very basic and doable, thanks.

  Read the article

• Retrieving index of Jquery Tabs

  - by Kelvin

  Hello I am trying to get index of current selected tab. Alert(ui.index) returns "undefined". Any idea why? thanks <script> $(document).ready(function(){ var $tabs = $("#apttabs > ul").tabs(); $tabs.bind('tabsselect', function(event, ui) { alert(ui.index); }); }); </script> <div id="apttabs"> <ul> <li><a href="#fragment-1"><span>tab1</span></a></li> <li><a href="#fragment-2"><span>tab1</span></a></li> <li><a href="#fragment-3"><span>tab1</span></a></li> </ul> <div id="fragment-1">content 1</div> <div id="fragment-2">content 1</div> <div id="fragment-3">content 1</div> </div>

  Read the article

• How to detect whether an EventWaitHandle is waiting?

  - by AngryHacker

  I have a fairly well multi-threaded winforms app that employs the EventWaitHandle in a number of places to synchronize access. So I have code similar to this: List<int> _revTypes; EventWaitHandle _ewh = new EventWaitHandle(false, EventResetMode.ManualReset); void StartBackgroundTask() { _ewh.Reset(); Thread t = new Thread(new ThreadStart(LoadStuff)); t.Start(); } void LoadStuff() { _revTypes = WebServiceCall.GetRevTypes() // ...bunch of other calls fetching data from all over the place // using the same pattern _ewh.Set(); } List<int> RevTypes { get { _ewh.WaitOne(); return _revTypes; } } Then I just call .RevTypes somewehre from the UI and it will return data to me when LoadStuff has finished executing. All this works perfectly correctly, however RevTypes is just one property - there are actually several dozens of these. And one or several of these properties are holding up the UI from loading in a fast manner. Short of placing benchmark code into each property, is there a way to see which property is holding the UI from loading? Is there a way to see whether the EventWaitHandle is forced to actually wait?

  Read the article

• Scripts fail when jQuery.js isn't cached. When cached, scripts run fine.

  - by Bob

  I have jQuery UI Tabs which load their content via AJAX. About once every 15 times when the entire page is loaded (not just XHR), things fail and I don't see the proper content in the tab. Fiddler showed me that when things fail I also see that jQuery.js and jQuery-ui.js are both sent to the browser in full (~100kB). Normally, a page load results in HTTP status code 304 for both of those files, they're not re-downloaded, and the page displays properly. When the status code is 200 and fresh copies of jQuery/UI are sent, things fail. I notice this most often in IE8, but that's because I use it for web development. I have seen it in Firefox, but for some reason I can't reproduce it now. Fiddler shows that the HTTP request asks for: GET /Scripts/jquery-1.3.2.min.js?_=1255309685187 HTTP/1.1 I can't figure out what the ?_=1255309685187 is for, but I'm guessing it's a token to indicate for how long the file should be cached. Since I can't reproduce the problem in Firefox right now, I don't know what Firebug says. Any insight would be appreciated. EDIT: This is with Visual Studio's development webserver.

  Read the article

• VB.NET Two different approaches to generic cross-threaded operations; which is better?

  - by BASnappl

  VB.NET 2010, .NET 4 Hello, I recently read about using SynchronizationContext objects to control the execution thread for some code. I have been using a generic subroutine to handle (possibly) cross-thread calls for things like updating UI controls that utilizes Invoke. I'm an amateur and have a hard time understanding the pros and cons of any particular approach. I am looking for some insight on which approach might be preferable and why. Update: This question is motivated, in part, by statements such as the following from the MSDN page on Control.InvokeRequired. An even better solution is to use the SynchronizationContext returned by SynchronizationContext rather than a control for cross-thread marshaling. Method 1: Public Sub InvokeControl(Of T As Control)(ByVal Control As T, ByVal Action As Action(Of T)) If Control.InvokeRequired Then Control.Invoke(New Action(Of T, Action(Of T))(AddressOf InvokeControl), New Object() {Control, Action}) Else Action(Control) End If End Sub Method 2: Public Sub UIAction(Of T As Control)(ByVal Control As T, ByVal Action As Action(Of Control)) SyncContext.Send(New Threading.SendOrPostCallback(Sub() Action(Control)), Nothing) End Sub Where SyncContext is a Threading.SynchronizationContext object defined in the constructor of my UI form: Public Sub New() InitializeComponent() SyncContext = WindowsFormsSynchronizationContext.Current End Sub Then, if I wanted to update a control (e.g., Label1) on the UI form, I would do: InvokeControl(Label1, Sub(x) x.Text = "hello") or UIAction(Label1, Sub(x) x.Text = "hello") So, what do y'all think? Is one way preferred or does it depend on the context? If you have the time, verbosity would be appreciated! Thanks in advance, Brian

  Read the article

• Pre Project Documentation

  - by DeanMc

  I have an issue that I feel many programmers can relate to... I have worked on many small scale projects. After my initial paper brain storm I tend to start coding. What I come up with is usually a rough working model of the actual application. I design in a disconnected fashion so I am talking about underlying code libraries, user interfaces are the last thing as the library usually dictates what is needed in the UI. As my projects get bigger I worry that so should my "spec" or design document. The above paragraph, from my investigations, is echoed all across the internet in one fashion or another. When a UI is concerned there is a bit more information but it is UI specific and does not relate to code libraries. What I am beginning to realise is that maybe code is code is code. It seems from my extensive research that there is no 1:1 mapping between a design document and the code. When I need to research a topic I dump information into OneNote and from there I prioritise features into versions and then into related chunks so that development runs in a fairly linear fashion, my tasks tend to look like so: Implement Binary File Reader Implement Binary File Writer Create Object to encapsulate Data for expression to the caller Now any programmer worth his salt is aware that between those three to do items could be a potential wall of code that could expand out to multiple files. I have tried to map the complete code process for each task but I simply don't think it can be done effectively. By the time one mangles pseudo code it is essentially code anyway so the time investment is negated. So my question is this: Am I right in assuming that the best documentation is the code itself. We are all in agreement that a high level overview is needed. How high should this be? Do you design to statement, class or concept level? What works for you?

  Read the article

• BackOffice Database Application FrontEnd - Program in C#/VB.Net or PHP?

  - by HK1

  I'm working on a project where there will be a MySQL database containing data that will mostly be displayed on the web using PHP. However, there is a need here for a back-office data entry application (linked to the same MySQL database) that is feature rich and easy to use. what I'm trying to understand is where we are at with web-based frontends. I find that there are still so many events and features that I can make use of in a Windows Desktop GUI written in something like C#, VB.Net or MS Access. I don't have a lot of experience programming UI for web but it's my impression that it's still more difficult and takes longer to get similar or the same functionality using non-MS web technologies (I dislike ASP.net, sorry) as compared to programming the desktop portion in a traditional desktop application language like C#, VB.Net, or MS Access. jQuery and jQuery UI are definately making things easier. Also, there's very rich online applications like Google Docs and Zoho but it's my impression that these are programmed by some of the top web UI programmers around, not to mention that it takes longer to write it and intensive testing to make it work in all of your target browsers. It also takes extra time and code to "block" browsers that don't meet the requirements. What programming language would you recommend? I know I may not have given enough information here but I'm not sure what I'm missing. If you have questions just leave a comment below so I can edit this post and answer the questions.

  Read the article

• asp.net stored procedure problem

  - by kenom

  Why this code don't work,when i want run this code vwd 2008 express show me this error message:Invalid object name 'answers'. this is my ascx.cs code: using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Data; using System.Web.UI; using System.Web.UI.WebControls; using System.Web.Security; using System.Data.SqlClient; using System.Configuration; public partial class odgl : System.Web.UI.UserControl { protected void Page_Load(object sender, EventArgs e) { string connectionString = @"SANATIZEDSTRING!!!!"; using (SqlConnection cn = new SqlConnection(connectionString)) { using (SqlCommand dohvati = new SqlCommand("dbo.get_answers",cn)) { dohvati.CommandType = CommandType.StoredProcedure; SqlParameter izracun = new SqlParameter("@count", SqlDbType.Int); izracun.Direction = ParameterDirection.Output; dohvati.Parameters.Add(izracun); cn.Open(); dohvati.ExecuteNonQuery(); int count = Int32.Parse(dohvati.Parameters["@count"].Value.ToString()); Response.Write(count.ToString()); cn.Close(); } } } } and this is my stored procedure : set ANSI_NULLS ON set QUOTED_IDENTIFIER ON GO ALTER procedure [dbo].[get_answers] @ukupno int output as select @count= (SELECT COUNT(*) FROM answers) go

  Read the article

• error: expected ',' or '...' before numeric constant

  - by goldfrapp04

  Just a Qt Gui Application with QDialog as the Base Class, the simplest type you can expect. I've programmed on Qt for several times but this is the first time I meet this problem... I've added minimal code to the program, and here's the code in dialog.h (which is mostly automatically generated) #ifndef DIALOG_H #define DIALOG_H #include <QDialog> #include <QPixmap> #include "bmp.h" namespace Ui { class Dialog; } class Dialog : public QDialog { Q_OBJECT public: explicit Dialog(QWidget *parent = 0); ~Dialog(); private slots: void on_openButton_clicked(); private: Ui::Dialog *ui; BMP srcImage; QImage compressedImage[3]; }; #endif // DIALOG_H While I edit, the "public:" is underlined and says "unexpected token '('". When I try to build the program, it says in the line "Q_OBJECT", "error: expected ',' or '...' before numeric constant". I'm sure I've defined nothing related to it (to be exact, I defined an N and an n in file bmp.h, both are int). Any idea of what's wrong here? Thanks.

  Read the article

• Jquery autocomplete with Dynamic input box.?

  - by Kaps Hasija

  I have done so much R & D for Jquery Auto complete, I found some result but not as much i needed. I am giving you code which are currently i am using . <input type="text" value="|a" name="completeMe" id="Subject" />// This input box will created by Dynamic using forloop // My Jquery Code $(function () { $("#Subject").autocomplete({ source: '/Cataloging/Bib/GetSubject', minLength: 1, select: function (event, ui) { // Do something with "ui.item.Id" or "ui.item.Name" or any of the other properties you selected to return from the action } }); }); // My Action Method public ActionResult GetSubject(string term) { term = term.Substring(2, term.Length-2); return Json(db.BibContents.Where(city => city.Value.StartsWith(term)).Select(city => city.Value), JsonRequestBehavior.AllowGet); } // My code is running with static input but while creating Dynamic I need to use live event but i don't know how can i use Live Event with this code. NOTE: I am using static value of input "|a" after rendering on action i am removing that first two char to make proper search from database. Thanks

  Read the article

• Updating Pointer using signals and slots

  - by Umesha MS

  Hi, I am very new to the QT; please help me to solve the problem. I am using thread to perform intensive operation in back ground. Meanwhile I want to update the UI, so I am using SIGNALS and SLOTS. To update UI I emit a signal and update UI. Let us consider bellow sample code, struct sample { QString name; QString address; }; void Update(sample *); void sampleFunction() { sample a; a.name = "Sachin Tendulkar"; a.address = "India" emit Update(&a); } In the above code we are creating a local object and passing the address of local object. In the QT document, it says that when we emit a signal it will be placed in the queue and late it will be delivered to the windows. Since my object is in local scope it will be delete once it goes out of the scope. Please tell me a way to send a pointer in a signal.

  Read the article

• How should I organize my Java GUI?

  - by Spencer

  I'm creating a game in Java for fun and I'm trying to decide how to organize my classes for the GUI. So far, all the classes with only the swing components and layout (no logic) are in a package called "ui". I now need to add listeners (i.e. ActionListener) to components (i.e. button). The listeners need to communicate with the Game class. Currently I have: Game.java - creates the frame add panels to it import javax.swing.; import ui.; public class Game { private JFrame frame; Main main; Rules rules; Game() { rules = new Rules(); frame = new JFrame(); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); main = new Main(); frame.setContentPane(main.getContentPane()); show(); } void show() { frame.pack(); frame.setLocationRelativeTo(null); frame.setVisible(true); } public static void main(String[] args) { new Game(); } } Rules.java - game logic ui package - all classes create new panels to be swapped out with the main frame's content pane Main.java (Main Menu) - creates a panel with components Where do I now place the functionality for the Main class? In the game class? Separate class? Or is the whole organization wrong? Thanks

  Read the article

• End-date greater than start-date validation javascript not working properly

  - by ianco slovak

  I am trying to make a validation for my dates so that enddate to be greater than start date but is not working.What am i doing wrong? <head> <script src="@Url.Content("~/Scripts/jquery.validate.min.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/jquery.validate.unobtrusive.min.js")" type="text/javascript"></script> <link href="@Url.Content("~/Content/Site.css")" rel="stylesheet" type="text/css" /> <script src="@Url.Content("~/Scripts/jquery-ui-1.8.19.min.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/jquery-ui.unobtrusive.min.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/jquery-ui.unobtrusive-0.5.0.min.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/gen_validatorv4.js")" type="text/javascript"></script> </head> @using (Html.BeginForm("SearchFree", "Reservation", FormMethod.Get,new {id = "form" })) { <h7>Introduceti perioada Rezervarii</h7> <div class="editor-label"> <label id="cautare" for="StartDate">Data Intrare: </label>@(Html.JQueryUI().Datepicker("StartDate").DateFormat("mm-dd-yy").MinDate(DateTime.Today).ShowButtonPanel(true).ChangeYear(true).ChangeMonth(true).NumberOfMonths(2)) </div> <div class="editor-label"> <label id="cautare" for="EndDate">Data Iesire:</label>@(Html.JQueryUI().Datepicker("EndDate").DateFormat("mm-dd-yy").MinDate(DateTime.Today).ShowButtonPanel(true).ChangeYear(true).ChangeMonth(true).NumberOfMonths(2)) </div> <p> <input id="buton1" type="submit" value="Cauta camere libere" /> </p> } <script type="text/javascript"> $(document).ready(function () { $.validator.addMethod("EndDate", function (value, element) { var startDate = $('.StartDate').val(); return Date.parse(startDate) <= Date.parse(value); } , "* End date must be after start date"); $('.form').validate(); }); </script>

  Read the article

• How to include and evaluate xhtml content represented as a String into a page using JSF?

  - by happycoder

  Hi! Im using JSF 1.2 and need to include xhtml content represented as a String in a bean. So, how can I get the content from a bean in xhtml but represented as a String and render it on the page? Here is an example: myPage.xhml ... xmlns:ui="http://java.sun.com/jsf/facelets" xmlns:h="http://java.sun.com/jsf/html" xmlns:a4j="http://richfaces.org/a4j" ... <h:panelGrid> <a4j:outputPanel ajaxRendered="true"> <ui:include src="#{myBean.someContent}" /> <!-- this doesnt work! --> </a4j:outputPanel> </h:panelGrid> ... MyBean.java ... class MyBean ... { private String someContent = "<h:panelGrid><h:outputText value=\"Name:\"/><h:inputText value=\"#{anotherBean.name}\" /></h:panelGrid>"; public String getSomeContent() { return someContent; } public void setSomeContent(String someContent) { this.someContent = someContent; } } i.e. in myPage.xhtml I want to read the someContent variable and include the content before page evaluation. The ui:include-tag nor the h:outputText escape="false" seems to work. /happycoder

  Read the article

• Updating a composite primary key

  - by VBCSharp

  I am struggling with the philosophical discussions about whether or not to use composite primary keys on my SQL Server database. I have always used the surrogate keys in the past and I am challenging myself by leaving my comfort zone to try something different. I have read many discussion but can't come to any kind of solution yet. The struggle I am having is when I have to update a record with the composite PK. For example, the record in questions is like this: ContactID, RoleID, EffectiveDate, TerminationDT. The PK in this case is the ContactID, RoleID, and EffectiveDate. TerminationDT can be null. If in my UI, the user changes the RoleID and then I need to update the record. Using the surrogate key I can do an Update Table Set RoleID = 1 WHERE surrogateID = Z. However, using the Composite Key way, once one of the fields in the composite key changes I have no way to reference the old record to update it without now maintaining somewhere in the UI a reference to the old values. I do not bind datasources in my UI. I open a connection, get the data and store it in a bucket, then close the connection. What are everyone's opinions? Thanks.

  Read the article

< Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >