Search Results

Search found 3437 results on 138 pages for 'cell o'.

Page 131/138 | < Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >

• Battery life if using GPS and background program

  - by StealthRT

  I was wondering if anyone has created an app that starts in the background and utilizes the GPS to gather the current Lat and Long every minute or so? If you have, would you please provide your battery times? As in, how long does your phone last until its all out of juice from just running that background app with standard cell phone programs. I'm trying to see if it would be worth the time to create an app for myself but if i work for 8 hours and dont have a way of charging my phone during that time then i dont want to be going home and it shut down on me since my app i would create works at my house. I need the app to work since it will see when i am in range of my home (from the GPS) and then send commands to my server at the house from my phone. So thats why it would need to be able to stay in the background doing a check every 1 minute or so. Or only turn on the GPS (Is is doable with iOS? & Android?) whenever its after 5pm each day so that it will minimize the load on the battery?!? Any help or suggestions would be great! Thanks!

  Read the article

• How do you get and set a class property across multiple functions in Objective-C?

  - by editor

  Following up on this question about sharing objects between classes, I now need to figure out how to share the objects across various functions in a class. First, the setup: In my App Delegate I load menu information from JSON into a NSMutableDictionary and message that through to a view controller using a function called initWithData. I need to use this dictionary to populate a new Table View, which has methods like numberOfRowsInSection and cellForRowAtIndexPath. I'd like to use the dictionary count to return numberOfRowsInSection and info in the dictionary to populate each cell. Unfortunately, my code never gets beyond the init stage and the dictionary is empty so numberOfRowsInSection always returns zero. I thought I could create a class property, synthesize it and then set it. But it doesn't seem to want to retain the property's value. What am I doing wrong here? In the header .h: @interface FirstViewController:UIViewController <UITableViewDataSource, UITableViewDelegate, UITabBarControllerDelegate> { NSMutableDictionary *sectorDictionary; NSInteger sectorCount; } @property (nonatomic, retain) NSMutableDictionary *sectorDictionary; - (id)initWithData:(NSMutableDictionary*)data; @end in the implementation .m: - (id) testFunction:(NSMutableDictionary*)dictionary { NSLog(@"Count #1: %d", [dictionary count]); return nil; } - (id)initWithData:(NSMutableDictionary *)data { if (!(self=[super init])) { return nil; } [self testFunction:data]; // this is where I'd like to set a retained property self.sectorDictionary = data; return nil; } - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { NSLog(@"Count #2: %d", [self.sectorDictionary count]); return [self.sectorDictionary count]; } Output from NSLog: 2010-05-04 23:00:06.255 JSONApp[15890:207] Count #1: 9 2010-05-04 23:00:06.259 JSONApp[15890:207] Count #2: 0

  Read the article

• Query table value aliasing in Oracle SQL

  - by Strata

  I have a homework assignment in SQL for Oracle 10g where I have to apply union to two different select statements, to return two columns. I need the values of each cell under vendor_state to indicate CA and every other value in another state to return "Outside CA", to indicate they're elsewhere. I applied the union and produced the two columns and the listings for CA, but many other state IDs were listed and I couldn't find an explanation for how to change the actual values in the query itself. Eventually, I stumbled on an answer, but I can't explain why this works. The code is as follows: SELECT vendor_name, vendor_state FROM vendors WHERE vendor_state IN 'CA' UNION SELECT vendor_name, 'Outside CA' AS vendor_state FROM vendors WHERE vendor_state NOT IN 'CA' ORDER BY vendor_name This gives me the exact answer I need, but I don't know why the aliasing in the second select statement can behave this way....no explanation is given in my textbook and nothing I've read indicates that column aliasing can be done like this. But, by switching the column name and the alias value, I have replaced the value being returned rather than the column name itself...I'm not complaining about the result, but it would help if I knew how I did it.

  Read the article

• Modifying html of dom element that was created after page loaded

  - by Ben321

  I have two separate AJAX calls. One that gets a list of items from a txt file and creates an HTML table out of them and one that talks to a database to find how much each item costs and then lists this in the corresponding table cell for each item (I know this may sound like a strange approach, but it's a good option in our case...). The issue is that the price is not getting written to the table since the table is created (or to be precise, the rows of the table are created) after the page loads. I'm not sure how to fix this. $(document).ready(function() { makeItemTable(); listPrices(); ... }); function makeItemTable() { $.ajax({ url: 'products.php', type: 'GET' }) .done(function(response) { $('.price-table > tbody').html(response); }) } function listPrices() { .ajax({ url: 'prices.php', type: 'GET' }) .done(function(response) { priceData = $.parseJSON(response); $('.price-table tr').each(function() { var item = $(this).find('td:nth-child(1)').text(); if (priceData[item]) { var price = priceData[item]; $(this).find('td:nth-child(2)').text(price); } }) }

  Read the article

• convert a repeating code to method

  - by Mr_Green

  In my project, I am adding ComboBox, Text, Link label to my DataGridView dgvMain.I have created different methods for different cell templates as shown below: (The code below is working) gridLnklbl(string headerName) DataGridViewLinkColumn col = new DataGridViewLinkColumn(); col.HeaderText = headerName; // col.Name = "col" + headerName; // same code repeating to all the methods dgvMain.Columns.Add(col); // gridCmb(string headerName) DataGridViewComboBoxColumn col = new DataGridViewComboBoxColumn(); col.HeaderText = headerName; col.Name = "col" + headerName; dgvMain.Columns.Add(col); gridText(string headerName) DataGridViewTextBoxColumn col = new DataGridViewTextBoxColumn(); col.HeaderText = headerName; col.Name = "col" + headerName; dgvMain.Columns.Add(col); As you can see, except the declaration of objects, the code for every method is repeating. Just curious to know, can the repeating code be converted to single method? I dont know how to do that.. Its not about 3 codes of line, I have written many more lines which can be make common to those methods.

  Read the article

• Google sheet dynamic WHERE clause for query() statement

  - by jason_cant_code

  I have a data table like so: a 1 a 2 b 3 b 4 c 5 c 6 c 7 I want to pull items out of this table by dynamically telling it what letters to pull. My current formula is: =query(A1:B7,"select * where A ='" & D1 & "'"). D1 being the cell I wish to modify to modify the query. I want to be able input into D1 -- a, a,b, a,b,c and have the query work. I know it would involve or statements in the query, but haven't figured out how to make the formula dynamic. I am looking for a general solution for this pattern: a -- A = 'a' a,b -- A = 'a' or A = 'b' a,b,c -- A = 'a' or A = 'b' or A='c' Or any other solution that solves the problem. Edit: So far I have =ArrayFormula(CONCATENATE("A='"&split(D3,",")&"' or ")) this gives A='a' or A='b' or A='c' or for a,b,c. can't figure out how to remove the last or.

  Read the article

• NSUTF8StringEncoding gives me this %0A%20%20%20%20%22http://example.com/example.jpg%22%0A

  - by user1530141

  So I'm trying to load pictures from twitter. If i just use the URL in the json results without encoding, in the dataWithContentsOfURL, I get nil URL argument. If I encode it, I get %0A%20%20%20%20%22http://example.com/example.jpg%22%0A. I know I can use rangeOfString: or stringByReplacingOccurrencesOfString: but can I be sure that it will always be the same, is there another way to handle this, and why is this happening to my twitter response and not my instagram response? i have also tried stringByTrimmingCharactersInSet:[NSCharacterSet whitespaceAndNewlineCharacterSet] and it does nothing. this is the url directly from the json... 2013-11-08 22:09:31:812 JaVu[1839:1547] -[SingleEventTableViewController tableView:cellForRowAtIndexPath:] [Line 406] ( "http://pbs.twimg.com/media/BYWHiq1IYAAwSCR.jpg" ) here is my code if ([post valueForKeyPath:@"entities.media.media_url"]) { NSString *twitterString = [[NSString stringWithFormat:@"%@", [post valueForKeyPath:@"entities.media.media_url"]]stringByTrimmingCharactersInSet:[NSCharacterSet whitespaceAndNewlineCharacterSet]]; twitterString = [twitterString stringByAddingPercentEscapesUsingEncoding:NSUTF8StringEncoding]; NSLog(@"%@", twitterString); if (twitterString != nil){ NSURL *twitterPhotoUrl = [NSURL URLWithString:twitterString]; NSLog(@"%@", twitterPhotoUrl); dispatch_queue_t queue = kBgQueue; dispatch_async(queue, ^{ NSError *error; NSData* data = [NSData dataWithContentsOfURL:twitterPhotoUrl options:NSDataReadingUncached error:&error]; UIImage *image = [UIImage imageWithData:data]; dispatch_sync(dispatch_get_main_queue(), ^{ [streamPhotoArray replaceObjectAtIndex:indexPath.row withObject:image]; cell.instagramPhoto.image = image; }); }); } }

  Read the article

• How do I troubleshoot an IPsec tunnel (from a cellular router to a public server)?

  - by Hanno Fietz

  I'm new to IPsec and struggling with a setup that might soon be widely used in our operations (provided I do understand it, eventually...). A cellular router (blackbox by netModule, from its log messages it seems to be running Linux and OpenSwan) connects a sensor network on customers' sites with our public server. We need to be able to connect into the local network, so I had the cell provider give me a public IP (a dynamic one). The way their setup works, the public IPs only allow IPsec traffic. I set up OpenSwan on our Ubuntu server (running Jaunty). This is my connection config from /etc/ipsec.conf: conn gprs-field-devices left=my.pub.lic.ip [email protected] #leftsubnet=192.168.1.129/25 right=%any [email protected] #rightsubnet=192.168.1.1/25 #rightnexthop=%defaultroute auto=add On the router, all I have is the Web UI, in which I made the following settings: "Remote endpoint": public IP of server, same as "left" above "Local Network Address": 192.168.1.1 "Local Network Mask": 255.255.255.128 "Remote Network Address": 192.168.1.129 "Remote Network Mask": 255.255.255.128 The pluto process on the server is listening for connections on port 500. It can't open a tunnel, obviously, because it doesn't know at which IP the client is. I set up a passphrase as PSK for @field.econemon.com in /etc/ipsec.secrets and also configured it in the router (which doesn't seem to support certificates). My problem is, nothing happens. The router just says, IPsec is "down". When I copy-paste the IP into ipsec.conf (for "right="), and ask the server to ipsec auto --up gprs-field-devices, it just hangs until I press Ctrl-C. Is there anything wrong with my setup? How can I debug this further? My router gives the following loglines that seem related, but don't tell me anything: Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: loading secrets from "/etc/ipsec.secrets" Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: loading secrets from "/etc/ipsec.d/hostkey.secrets" Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: loading secrets from "/etc/ipsec.d/netbox0.secrets" Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: "netbox00" #1: initiating Main Mode Feb 21 23:08:20 Netbox daemon.err ipsec__plutorun: 104 "netbox00" #1: STATE_MAIN_I1: initiate Feb 21 23:08:20 Netbox daemon.err ipsec__plutorun: ...could not start conn "netbox00" Feb 21 23:08:22 Netbox authpriv.warn pluto[2497]: packet from 188.40.57.4:500: ignoring informational payload, type NO_PROPOSAL_CHOSEN Feb 21 23:08:22 Netbox authpriv.warn pluto[2497]: packet from 188.40.57.4:500: received and ignored informational message Feb 21 23:08:28 Netbox user.warn parrot.system_controller[762]: IPSECCTRLR: Tunnel 0 is down for 0 seconds Feb 21 23:08:40 Netbox user.warn parrot.system_controller[762]: IPSECCTRLR: Tunnel 0 is down for 10 seconds Feb 21 23:08:52 Netbox authpriv.warn pluto[2497]: packet from 188.40.57.4:500: ignoring informational payload, type NO_PROPOSAL_CHOSEN

  Read the article

• file doesn't open, running outside of debugger results in seg fault (c++)

  - by misterich

  Hello (and thanks in advance) I'm in a bit of a quandry, I cant seem to figure out why I'm seg faulting. A couple of notes: It's for a course -- and sadly I am required to use use C-strings instead of std::string. Please dont fix my code (I wont learn that way and I will keep bugging you). please just point out the flaws in my logic and suggest a different function/way. platform: gcc version 4.4.1 on Suse Linux 11.2 (2.6.31 kernel) Here's the code main.cpp: // /////////////////////////////////////////////////////////////////////////////////// // INCLUDES (C/C++ Std Library) #include <cstdlib> /// EXIT_SUCCESS, EXIT_FAILURE #include <iostream> /// cin, cout, ifstream #include <cassert> /// assert // /////////////////////////////////////////////////////////////////////////////////// // DEPENDENCIES (custom header files) #include "dict.h" /// Header for the dictionary class // /////////////////////////////////////////////////////////////////////////////////// // PRE-PROCESSOR CONSTANTS #define ENTER '\n' /// Used to accept new lines, quit program. #define SPACE ' ' /// One way to end the program // /////////////////////////////////////////////////////////////////////////////////// // CUSTOM DATA TYPES /// File Namespace -- keep it local namespace { /// Possible program prompts to display for the user. enum FNS_Prompts { fileName_, /// prints out the name of the file noFile_, /// no file was passed to the program tooMany_, /// more than one file was passed to the program noMemory_, /// Not enough memory to use the program usage_, /// how to use the program word_, /// ask the user to define a word. notFound_, /// the word is not in the dictionary done_, /// the program is closing normally }; } // /////////////////////////////////////////////////////////////////////////////////// // Namespace using namespace std; /// Nothing special in the way of namespaces // /////////////////////////////////////////////////////////////////////////////////// // FUNCTIONS /** prompt() prompts the user to do something, uses enum Prompts for parameter. */ void prompt(FNS_Prompts msg /** determines the prompt to use*/) { switch(msg) { case fileName_ : { cout << ENTER << ENTER << "The file name is: "; break; } case noFile_ : { cout << ENTER << ENTER << "...Sorry, a dictionary file is needed. Try again." << endl; break; } case tooMany_ : { cout << ENTER << ENTER << "...Sorry, you can only specify one dictionary file. Try again." << endl; break; } case noMemory_ : { cout << ENTER << ENTER << "...Sorry, there isn't enough memory available to run this program." << endl; break; } case usage_ : { cout << "USAGE:" << endl << " lookup.exe [dictionary file name]" << endl << endl; break; } case done_ : { cout << ENTER << ENTER << "like Master P says, \"Word.\"" << ENTER << endl; break; } case word_ : { cout << ENTER << ENTER << "Enter a word in the dictionary to get it's definition." << ENTER << "Enter \"?\" to get a sorted list of all words in the dictionary." << ENTER << "... Press the Enter key to quit the program: "; break; } case notFound_ : { cout << ENTER << ENTER << "...Sorry, that word is not in the dictionary." << endl; break; } default : { cout << ENTER << ENTER << "something passed an invalid enum to prompt(). " << endl; assert(false); /// something passed in an invalid enum } } } /** useDictionary() uses the dictionary created by createDictionary * - prompts user to lookup a word * - ends when the user enters an empty word */ void useDictionary(Dictionary &d) { char *userEntry = new char; /// user's input on the command line if( !userEntry ) // check the pointer to the heap { cout << ENTER << MEM_ERR_MSG << endl; exit(EXIT_FAILURE); } do { prompt(word_); // test code cout << endl << "----------------------------------------" << endl << "Enter something: "; cin.getline(userEntry, INPUT_LINE_MAX_LEN, ENTER); cout << ENTER << userEntry << endl; }while ( userEntry[0] != NIL && userEntry[0] != SPACE ); // GARBAGE COLLECTION delete[] userEntry; } /** Program Entry * Reads in the required, single file from the command prompt. * - If there is no file, state such and error out. * - If there is more than one file, state such and error out. * - If there is a single file: * - Create the database object * - Populate the database object * - Prompt the user for entry * main() will return EXIT_SUCCESS upon termination. */ int main(int argc, /// the number of files being passed into the program char *argv[] /// pointer to the filename being passed into tthe program ) { // EXECUTE /* Testing code * / char tempFile[INPUT_LINE_MAX_LEN] = {NIL}; cout << "enter filename: "; cin.getline(tempFile, INPUT_LINE_MAX_LEN, '\n'); */ // uncomment after successful debugging if(argc <= 1) { prompt(noFile_); prompt(usage_); return EXIT_FAILURE; /// no file was passed to the program } else if(argc > 2) { prompt(tooMany_); prompt(usage_); return EXIT_FAILURE; /// more than one file was passed to the program } else { prompt(fileName_); cout << argv[1]; // print out name of dictionary file if( !argv[1] ) { prompt(noFile_); prompt(usage_); return EXIT_FAILURE; /// file does not exist } /* file.open( argv[1] ); // open file numEntries >> in.getline(file); // determine number of dictionary objects to create file.close(); // close file Dictionary[ numEntries ](argv[1]); // create the dictionary object */ // TEMPORARY FILE FOR TESTING!!!! //Dictionary scrabble(tempFile); Dictionary scrabble(argv[1]); // creaate the dicitonary object //*/ useDictionary(scrabble); // prompt the user, use the dictionary } // exit return EXIT_SUCCESS; /// terminate program. } Dict.h/.cpp #ifndef DICT_H #define DICT_H // /////////////////////////////////////////////////////////////////////////////////// // DEPENDENCIES (Custom header files) #include "entry.h" /// class for dictionary entries // /////////////////////////////////////////////////////////////////////////////////// // PRE-PROCESSOR MACROS #define INPUT_LINE_MAX_LEN 256 /// Maximum length of each line in the dictionary file class Dictionary { public : // // Do NOT modify the public section of this class // typedef void (*WordDefFunc)(const char *word, const char *definition); Dictionary( const char *filename ); ~Dictionary(); const char *lookupDefinition( const char *word ); void forEach( WordDefFunc func ); private : // // You get to provide the private members // // VARIABLES int m_numEntries; /// stores the number of entries in the dictionary Entry *m_DictEntry_ptr; /// points to an array of class Entry // Private Functions }; #endif ----------------------------------- // /////////////////////////////////////////////////////////////////////////////////// // INCLUDES (C/C++ Std Library) #include <iostream> /// cout, getline #include <fstream> // ifstream #include <cstring> /// strchr // /////////////////////////////////////////////////////////////////////////////////// // DEPENDENCIES (custom header files) #include "dict.h" /// Header file required by assignment //#include "entry.h" /// Dicitonary Entry Class // /////////////////////////////////////////////////////////////////////////////////// // PRE-PROCESSOR MACROS #define COMMA ',' /// Delimiter for file #define ENTER '\n' /// Carriage return character #define FILE_ERR_MSG "The data file could not be opened. Program will now terminate." #pragma warning(disable : 4996) /// turn off MS compiler warning about strcpy() // /////////////////////////////////////////////////////////////////////////////////// // Namespace reference using namespace std; // /////////////////////////////////////////////////////////////////////////////////// // PRIVATE MEMBER FUNCTIONS /** * Sorts the dictionary entries. */ /* static void sortDictionary(?) { // sort through the words using qsort } */ /** NO LONGER NEEDED?? * parses out the length of the first cell in a delimited cell * / int getWordLength(char *str /// string of data to parse ) { return strcspn(str, COMMA); } */ // /////////////////////////////////////////////////////////////////////////////////// // PUBLIC MEMBER FUNCTIONS /** constructor for the class * - opens/reads in file * - creates initializes the array of member vars * - creates pointers to entry objects * - stores pointers to entry objects in member var * - ? sort now or later? */ Dictionary::Dictionary( const char *filename ) { // Create a filestream, open the file to be read in ifstream dataFile(filename, ios::in ); /* if( dataFile.fail() ) { cout << FILE_ERR_MSG << endl; exit(EXIT_FAILURE); } */ if( dataFile.is_open() ) { // read first line of data // TEST CODE in.getline(dataFile, INPUT_LINE_MAX_LEN) >> m_numEntries; // TEST CODE char temp[INPUT_LINE_MAX_LEN] = {NIL}; // TEST CODE dataFile.getline(temp,INPUT_LINE_MAX_LEN,'\n'); dataFile >> m_numEntries; /** Number of terms in the dictionary file * \todo find out how many lines in the file, subtract one, ingore first line */ //create the array of entries m_DictEntry_ptr = new Entry[m_numEntries]; // check for valid memory allocation if( !m_DictEntry_ptr ) { cout << MEM_ERR_MSG << endl; exit(EXIT_FAILURE); } // loop thru each line of the file, parsing words/def's and populating entry objects for(int EntryIdx = 0; EntryIdx < m_numEntries; ++EntryIdx) { // VARIABLES char *tempW_ptr; /// points to a temporary word char *tempD_ptr; /// points to a temporary def char *w_ptr; /// points to the word in the Entry object char *d_ptr; /// points to the definition in the Entry int tempWLen; /// length of the temp word string int tempDLen; /// length of the temp def string char tempLine[INPUT_LINE_MAX_LEN] = {NIL}; /// stores a single line from the file // EXECUTE // getline(dataFile, tempLine) // get a "word,def" line from the file dataFile.getline(tempLine, INPUT_LINE_MAX_LEN); // get a "word,def" line from the file // Parse the string tempW_ptr = tempLine; // point the temp word pointer at the first char in the line tempD_ptr = strchr(tempLine, COMMA); // point the def pointer at the comma *tempD_ptr = NIL; // replace the comma with a NIL ++tempD_ptr; // increment the temp def pointer // find the string lengths... +1 to account for terminator tempWLen = strlen(tempW_ptr) + 1; tempDLen = strlen(tempD_ptr) + 1; // Allocate heap memory for the term and defnition w_ptr = new char[ tempWLen ]; d_ptr = new char[ tempDLen ]; // check memory allocation if( !w_ptr && !d_ptr ) { cout << MEM_ERR_MSG << endl; exit(EXIT_FAILURE); } // copy the temp word, def into the newly allocated memory and terminate the strings strcpy(w_ptr,tempW_ptr); w_ptr[tempWLen] = NIL; strcpy(d_ptr,tempD_ptr); d_ptr[tempDLen] = NIL; // set the pointers for the entry objects m_DictEntry_ptr[ EntryIdx ].setWordPtr(w_ptr); m_DictEntry_ptr[ EntryIdx ].setDefPtr(d_ptr); } // close the file dataFile.close(); } else { cout << ENTER << FILE_ERR_MSG << endl; exit(EXIT_FAILURE); } } /** * cleans up dynamic memory */ Dictionary::~Dictionary() { delete[] m_DictEntry_ptr; /// thou shalt not have memory leaks. } /** * Looks up definition */ /* const char *lookupDefinition( const char *word ) { // print out the word ---- definition } */ /** * prints out the entire dictionary in sorted order */ /* void forEach( WordDefFunc func ) { // to sort before or now.... that is the question } */ Entry.h/cpp #ifndef ENTRY_H #define ENTRY_H // /////////////////////////////////////////////////////////////////////////////////// // INCLUDES (C++ Std lib) #include <cstdlib> /// EXIT_SUCCESS, NULL // /////////////////////////////////////////////////////////////////////////////////// // PRE-PROCESSOR MACROS #define NIL '\0' /// C-String terminator #define MEM_ERR_MSG "Memory allocation has failed. Program will now terminate." // /////////////////////////////////////////////////////////////////////////////////// // CLASS DEFINITION class Entry { public: Entry(void) : m_word_ptr(NULL), m_def_ptr(NULL) { /* default constructor */ }; void setWordPtr(char *w_ptr); /// sets the pointer to the word - only if the pointer is empty void setDefPtr(char *d_ptr); /// sets the ponter to the definition - only if the pointer is empty /// returns what is pointed to by the word pointer char getWord(void) const { return *m_word_ptr; } /// returns what is pointed to by the definition pointer char getDef(void) const { return *m_def_ptr; } private: char *m_word_ptr; /** points to a dictionary word */ char *m_def_ptr; /** points to a dictionary definition */ }; #endif -------------------------------------------------- // /////////////////////////////////////////////////////////////////////////////////// // DEPENDENCIES (custom header files) #include "entry.h" /// class header file // /////////////////////////////////////////////////////////////////////////////////// // PUBLIC FUNCTIONS /* * only change the word member var if it is in its initial state */ void Entry::setWordPtr(char *w_ptr) { if(m_word_ptr == NULL) { m_word_ptr = w_ptr; } } /* * only change the def member var if it is in its initial state */ void Entry::setDefPtr(char *d_ptr) { if(m_def_ptr == NULL) { m_word_ptr = d_ptr; } }

  Read the article

• Use ASP.NET 4 Browser Definitions with ASP.NET 3.5

  - by Stephen Walther

  We updated the browser definitions files included with ASP.NET 4 to include information on recent browsers and devices such as Google Chrome and the iPhone. You can use these browser definition files with earlier versions of ASP.NET such as ASP.NET 3.5. The updated browser definition files, and instructions for installing them, can be found here: http://aspnet.codeplex.com/releases/view/41420 The changes in the browser definition files can cause backwards compatibility issues when you upgrade an ASP.NET 3.5 web application to ASP.NET 4. If you encounter compatibility issues, you can install the old browser definition files in your ASP.NET 4 application. The old browser definition files are included in the download file referenced above. What’s New in the ASP.NET 4 Browser Definition Files The complete set of browsers supported by the new ASP.NET 4 browser definition files is represented by the following figure:     If you look carefully at the figure, you’ll notice that we added browser definitions for several types of recent browsers such as Internet Explorer 8, Firefox 3.5, Google Chrome, Opera 10, and Safari 4. Furthermore, notice that we now include browser definitions for several of the most popular mobile devices: BlackBerry, IPhone, IPod, and Windows Mobile (IEMobile). The mobile devices appear in the figure with a purple background color. To improve performance, we removed a whole lot of outdated browser definitions for old cell phones and mobile devices. We also cleaned up the information contained in the browser files. Here are some of the browser features that you can detect: Are you a mobile device? <%=Request.Browser.IsMobileDevice %> Are you an IPhone? <%=Request.Browser.MobileDeviceModel == "IPhone" %> What version of JavaScript do you support? <%=Request.Browser["javascriptversion"] %> What layout engine do you use? <%=Request.Browser["layoutEngine"] %>   Here’s what you would get if you displayed the value of these properties using Internet Explorer 8: Here’s what you get when you use Google Chrome: Testing Browser Settings When working with browser definition files, it is useful to have some way to test the capability information returned when you request a page with different browsers. You can use the following method to return the HttpBrowserCapabilities the corresponds to a particular user agent string and set of browser headers: public HttpBrowserCapabilities GetBrowserCapabilities(string userAgent, NameValueCollection headers) { HttpBrowserCapabilities browserCaps = new HttpBrowserCapabilities(); Hashtable hashtable = new Hashtable(180, StringComparer.OrdinalIgnoreCase); hashtable[string.Empty] = userAgent; // The actual method uses client target browserCaps.Capabilities = hashtable; var capsFactory = new System.Web.Configuration.BrowserCapabilitiesFactory(); capsFactory.ConfigureBrowserCapabilities(headers, browserCaps); capsFactory.ConfigureCustomCapabilities(headers, browserCaps); return browserCaps; } At the end of this blog entry, there is a link to download a simple Visual Studio 2008 project – named Browser Definition Test -- that uses this method to display capability information for arbitrary user agent strings. For example, if you enter the user agent string for an iPhone then you get the results in the following figure: The Browser Definition Test application enables you to submit a user-agent string and display a table of browser capabilities information. The browser definition files contain sample user-agent strings for each browser definition. I got the iPhone user-agent string from the comments in the iphone.browser file. Enumerating Browser Definitions Someone asked in the comments whether or not there is a way to enumerate all of the browser definitions. You can do this if you ware willing to use a little reflection and read a private property. The browser definition files in the config\browsers folder get parsed into a class named BrowserCapabilitesFactory. After you run the aspnet_regbrowsers tool, you can see the source for this class in the config\browser folder by opening a file named BrowserCapsFactory.cs. The BrowserCapabilitiesFactoryBase class has a protected property named BrowserElements that represents a Hashtable of all of the browser definitions. Here's how you can read this protected property and display the ID for all of the browser definitions: var propInfo = typeof(BrowserCapabilitiesFactory).GetProperty("BrowserElements", BindingFlags.NonPublic | BindingFlags.Instance); Hashtable browserDefinitions = (Hashtable)propInfo.GetValue(new BrowserCapabilitiesFactory(), null); foreach (var key in browserDefinitions.Keys) { Response.Write("" + key); } If you run this code using Visual Studio 2008 then you get the following results: You get a huge number of outdated browsers and devices. In all, 449 browser definitions are listed. If you run this code using Visual Studio 2010 then you get the following results: In the case of Visual Studio 2010, all the old browsers and devices have been removed and you get only 19 browser definitions. Conclusion The updated browser definition files included in ASP.NET 4 provide more accurate information for recent browsers and devices. If you would like to test the new browser definitions with different user-agent strings then I recommend that you download the Browser Definition Test project: Browser Definition Test Project

  Read the article

• Difference between LASTDATE and MAX for semi-additive measures in #DAX

  - by Marco Russo (SQLBI)

  I recently wrote an article on SQLBI about the semi-additive measures in DAX. I included the formulas common calculations and there is an interesting point that worth a longer digression: the difference between LASTDATE and MAX (which is similar to FIRSTDATE and MIN – I just describe the former, for the latter just replace the correspondent names). LASTDATE is a dax function that receives an argument that has to be a date column and returns the last date active in the current filter context. Apparently, it is the same value returned by MAX, which returns the maximum value of the argument in the current filter context. Of course, MAX can receive any numeric type (including date), whereas LASTDATE only accepts a column of type date. But overall, they seems identical in the result. However, the difference is a semantic one. In fact, this expression: LASTDATE ( 'Date'[Date] ) could be also rewritten as: FILTER ( VALUES ( 'Date'[Date] ), 'Date'[Date] = MAX ( 'Date'[Date] ) ) LASTDATE is a function that returns a table with a single column and one row, whereas MAX returns a scalar value. In DAX, any expression with one row and one column can be automatically converted into the corresponding scalar value of the single cell returned. The opposite is not true. So you can use LASTDATE in any expression where a table or a scalar is required, but MAX can be used only where a scalar expression is expected. Since LASTDATE returns a table, you can use it in any expression that expects a table as an argument, such as COUNTROWS. In fact, you can write this expression: COUNTROWS ( LASTDATE ( 'Date'[Date] ) ) which will always return 1 or BLANK (if there are no dates active in the current filter context). You cannot pass MAX as an argument of COUNTROWS. You can pass to LASTDATE a reference to a column or any table expression that returns a column. The following two syntaxes are semantically identical: LASTDATE ( 'Date'[Date] ) LASTDATE ( VALUES ( 'Date'[Date] ) ) The result is the same and the use of VALUES is not required because it is implicit in the first syntax, unless you have a row context active. In that case, be careful that using in a row context the LASTDATE function with a direct column reference will produce a context transition (the row context is transformed into a filter context) that hides the external filter context, whereas using VALUES in the argument preserve the existing filter context without applying the context transition of the row context (see the columns LastDate and Values in the following query and result). You can use any other table expressions (including a FILTER) as LASTDATE argument. For example, the following expression will always return the last date available in the Date table, regardless of the current filter context: LASTDATE ( ALL ( 'Date'[Date] ) ) The following query recap the result produced by the different syntaxes described. EVALUATE     CALCULATETABLE(         ADDCOLUMNS(              VALUES ('Date'[Date] ),             "LastDate", LASTDATE( 'Date'[Date] ),             "Values", LASTDATE( VALUES ( 'Date'[Date] ) ),             "Filter", LASTDATE( FILTER ( VALUES ( 'Date'[Date] ), 'Date'[Date] = MAX ( 'Date'[Date] ) ) ),             "All", LASTDATE( ALL ( 'Date'[Date] ) ),             "Max", MAX( 'Date'[Date] )         ),         'Date'[Calendar Year] = 2008     ) ORDER BY 'Date'[Date] The LastDate columns repeat the current date, because the context transition happens within the ADDCOLUMNS. The Values column preserve the existing filter context from being replaced by the context transition, so the result corresponds to the last day in year 2008 (which is filtered in the external CALCULATETABLE). The Filter column works like the Values one, even if we use the FILTER instead of the LASTDATE approach. The All column shows the result of LASTDATE ( ALL ( ‘Date’[Date] ) ) that ignores the filter on Calendar Year (in fact the date returned is in year 2010). Finally, the Max column shows the result of the MAX formula, which is the easiest to use and only don’t return a table if you need it (like in a filter argument of CALCULATE or CALCULATETABLE, where using LASTDATE is shorter). I know that using LASTDATE in complex expressions might create some issue. In my experience, the fact that a context transition happens automatically in presence of a row context is the main reason of confusion and unexpected results in DAX formulas using this function. For a reference of DAX formulas using MAX and LASTDATE, read my article about semi-additive measures in DAX.

  Read the article

• Using the new CSS Analyzer in JavaFX Scene Builder

  - by Jerome Cambon

  As you know, JavaFX provides from the API many properties that you can set to customize or make your components to behave as you want. For instance, for a Button, you can set its font, or its max size.Using Scene Builder, these properties can be explored and modified using the inspector. However, JavaFX also provides many other properties to have a fine grained customization of your components : the css properties. These properties are typically set from a css stylesheet. For instance, you can set a background image on a Button, change the Button corners, etc... Using Scene Builder, until now, you could set a css property using the inspector Style and Stylesheet editors. But you had to go to the JavaFX css documentation to know the css properties that can be applied to a given component. Hopefully, Scene Builder 1.1 added recently a very interesting new feature : the CSS Analyzer.It allows you to explore all the css properties available for a JavaFX component, and helps you to build your css rules. A very simple example : make a Button rounded Let’s take a very simple example:you would like to customize your Buttons to make them rounded. First, enable the CSS Analyzer, using the ‘View->Show CSS Analyzer’ menu. Grow the main window, and the CSS Analyzer to get more room: Then, drop a Button from the Library to the ContentView: the CSS Analyzer is now showing the Button css properties: As you can see, there is a ‘-fx-background-radius’ css property that allow to define the radius of the background (note that you can get the associated css documentation by clicking on the property name). You can then experiment this by setting the Button style property from the inspector: As you can see in the css doc, one can set the same radius for the 4 corners by a simple number. Once the style value is applied, the Button is now rounded, as expected.Look at the CSS Analyzer: the ‘-fx-background-radius’ property has now 2 entries: the default one, and the one we just entered from the Style property. The new value “win”: it overrides the default one, and become the actual value (to highlight this, the cell background becomes blue). Now, you will certainly prefer to apply this new style to all the Buttons of your FXML document, and have a css rule for this.To do this, save you document first, and create a css file in the same directory than the new document.Create an empty css file (e.g. test.css), and attach it the the root AnchorPane, by first selecting the AnchorPane, then using the Stylesheets editor from the inspector: Add the corresponding css rule to your new test.css file, from your preferred editor (Netbeans for me ;-) and save it. .button { -fx-background-radius: 10px;} Now, select your Button and have a look at the CSS Analyzer. As you can see, the Button is inheriting the css rule (since the Button is a child of the AnchorPane), and still have its inline Style. The Inline style “win”, since it has precedence on the stylesheet. The CSS Analyzer columns are displayed by precedence order.Note the small right-arrow icons, that allow to jump to the source of the value (either test.css, or the inspector in this case).Of course, unless you want to set a specific background radius for this particular Button, you can remove the inline Style from the inspector. Changing the color of a TitledPane arrow In some cases, it can be useful to be able to select the inner element you want to style directly from the Content View . Drop a TitledPane to the Content View. Then select from the CSS Analyzer the CSS cursor (the other cursor on the left allow you to come back to ‘standard’ selection), that will allow to select an inner element: height: 62px;" align="LEFT" border="0"> … and select the TitledPane arrow, that will get a yellow background: … and the Styleable Path is updated: To define a new css rule, you can first copy the Styleable path : .. then paste it in your test.css file. Then, add an entry to set the -fx-background-color to red. You should have something like: .titled-pane:expanded .title .arrow-button .arrow { -fx-background-color : red;} As soon as the test.css is saved, the change is taken into account in Scene Builder. You can also use the Styleable Path to discover all the inner elements of TitledPane, by clicking on the arrow icon: More details You can see the CSS Analyzer in action (and many other features) from the Java One BOF: BOF4279 - In-Depth Layout and Styling with the JavaFX Scene Builder presented by my colleague Jean-Francois Denise. On the right hand, click on the Media link to go to the video (streaming) of the presa. The Scene Builder support of CSS starts at 9:20 The CSS Analyzer presentation starts at 12:50

  Read the article

• ISO Files to USB &ndash; The Cheap and Easy Way

  - by RonGarlit

  (DISCLAIMER: Yes there are lots of more elegant ISO software beside the free Microsoft one I’m about to show. But free is free and it has been tested and works for me for making advance bootable USB drives. That is another story. Look up Windows 8 Developer Preview for that one on BING.) For those of use that work with new technology all the time we accumulate a lot of ISO files and have to burn them to CD/DVD’s quite often. But we now have machines without burner in the corporate environment. We have personally Netbooks and light wait highly mobile laptops that do not have DVD burner. USB ports are all the rage and now we have USB 3.0 which is way faster than the 2.0 we are used to. Just looking at the technology, space saving and the cost issues alone is a reason to buy these answer to the DVD’s. So what is special about USB 2.0 and USB 3.0? USB 2 has a maximum speed of 480 Mbps... (That is Megabits per SECOND!!) Now look at the storage that we have with USB thumb drives that are now up to 64 GB in size, cell phone and PDAs that have a lots of internal storage built in well above the 16 Gig range. At the MAX USB 2.0 speed of 480 Mbps a full transfer of data in between devices can take a long time. Time is money right. Every back up a iPhone? Don’t get me started. So at least the engineers have been planning ahead with USB 3.0 which offers a maximum transfer speed of 4.8 Gbps... (That is Giga bits per SECOND!!) That speed is almost 10 times faster than USB 2.0 …. We don’t need to do the math on that one do we? But for now I'm thrilled with USB 2.0 and the fact I can get these little 4 Gig USB drives for $4.00 each at Staples on sale. Well that is a no brainer don’t you think. But what can you do with them to replace that DVD. Simply and cheaply put………. THIS! First let’s get an ISO file like the Visual Studio 2010 Ultimate DVD ISO from MSDN to demonstrate with. I develop on several computers so this is a good choice for me. So we downloaded the ISO file and put it in a folder somewhere like this. Next we go download to the Windows 7 USB/DVD Download Tool site and read about the tool. http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool And click this like to get the tool and install it. Once it is installed you go to the Start, Programs menu, Windows 7 USB DVD Download Tool folder. And then click the tool to open it up. As you will see it is a sweet, simple tool that was originally designed to put the ISO for Windows 7 which is designed to be bootable on a USB or DVD for us geeks to play with. It is now being used for the Windows 8 Developer Preview by many developers for that for the same purpose it was built for in the past. But for now we will use it to put a NON Bootable ISO on a USB. Hey it does the job and I’m reusing a left over program. Why buy the fancy one or a free trial and clutter up my machine. We will click the BROWSE button and navigate to where we put our ISO file we want to put on the USB drive. Obviously we are going to click NEXT and continue to select a USB Device (you can guess what the DVD button is for). Next we select the USB that we have plugged into one of our laptops USB ports. Then we click the BEGIN COPYING button and the first thing the program does is format our USB drive. Then it starts copying out files out of the ISO and constructing the USB as if it was a DVD. So now that the files are copying to the drive I’m going to warn you. We will error out here. This program was design for bootable ISO’s of which this one is NOT. No problem because what fails it the writing of the bootable data to the drive that isn’t there. No biggie…. Forget the STARTOVER button is even there and click the dialog’s CLOSE button and exit the program. Now go to Windows Explorer and navigate to the USB Device. You can now access everything and even add stuff to the drive. But for me I want to keep this drive for one purpose and that is to install VS2010 on various machines. So the only stuff I’ll add to this is a folder of notes on things on visual studio that I might want to put on other machines I’m installing VS2010 on to. So that is it. Have a nice day! The Ron

  Read the article

• Simple Excel Export with EPPlus

  - by Jesse Taber

  Originally posted on: http://geekswithblogs.net/GruffCode/archive/2013/10/30/simple-excel-export-with-epplus.aspxAnyone I’ve ever met who works with an application that sits in front of a lot of data loves it when they can get that data exported to an Excel file for them to mess around with offline. As both developer and end user of a little website project that I’ve been working on, I found myself wanting to be able to get a bunch of the data that the application was collecting into an Excel file. The great thing about being both an end user and a developer on a project is that you can build the features that you really want! While putting this feature together I came across the fantastic EPPlus library. This library is certainly very well known and popular, but I was so impressed with it that I thought it was worth a quick blog post. This library is extremely powerful; it lets you create and manipulate Excel 2007/2010 spreadsheets in .NET code with a high degree of flexibility. My only gripe with the project is that they are not touting how insanely easy it is to build a basic Excel workbook from a simple data source. If I were running this project the approach I’m about to demonstrate in this post would be front and center on the landing page for the project because it shows how easy it really is to get started and serves as a good way to ease yourself in to some of the more advanced features. The website in question uses RavenDB, which means that we’re dealing with POCOs to model the data throughout all layers of the application. I love working like this so when it came time to figure out how to export some of this data to an Excel spreadsheet I wanted to find a way to take an IEnumerable<T> and just have it dumped to Excel with each item in the collection being modeled as a single row in the Excel worksheet. Consider the following class: public class Employee { public int Id { get; set; } public string Name { get; set; } public decimal HourlyRate { get; set; } public DateTime HireDate { get; set; } } Now let’s say we have a collection of these represented as an IEnumerable<Employee> and we want to be able to output it to an Excel file for offline querying/manipulation. As it turns out, this is dead simple to do with EPPlus. Have a look: public void ExportToExcel(IEnumerable<Employee> employees, FileInfo targetFile) { using (var excelFile = new ExcelPackage(targetFile)) { var worksheet = excelFile.Workbook.Worksheets.Add("Sheet1"); worksheet.Cells["A1"].LoadFromCollection(Collection: employees, PrintHeaders: true); excelFile.Save(); } } That’s it. Let’s break down what’s going on here: Create a ExcelPackage to model the workbook (Excel file). Note that the ‘targetFile’ value here is a FileInfo object representing the location on disk where I want the file to be saved. Create a worksheet within the workbook. Get a reference to the top-leftmost cell (addressed as A1) and invoke the ‘LoadFromCollection’ method, passing it our collection of Employee objects. Behind the scenes this is reflecting over the properties of the type provided and pulling out any public members to become columns in the resulting Excel output. The ‘PrintHeaders’ parameter tells EPPlus to grab the name of the property and put it in the first row. Save the Excel file All of the heavy lifting here is being done by the ‘LoadFromCollection’ method, and that’s a good thing. Now, this was really easy to do, but it has some limitations. Using this approach you get a very plain, un-styled Excel worksheet. The column widths are all set to the default. The number format for all cells is ‘General’ (which proves particularly interesting if you have a DateTime property in your data source). I’m a “no frills” guy, so I wasn’t bothered at all by trading off simplicity for style and formatting. That said, EPPlus has tons of samples that you can download that illustrate how to apply styles and formatting to cells and a ton of other advanced features that are way beyond the scope of this post.

  Read the article

• How to Buy an SD Card: Speed Classes, Sizes, and Capacities Explained

  - by Chris Hoffman

  Memory cards are used in digital cameras, music players, smartphones, tablets, and even laptops. But not all SD cards are created equal — there are different speed classes, physical sizes, and capacities to consider. Different devices require different types of SD cards. Here are the differences you’ll need to keep in mind when picking out the right SD card for your device. Speed Class In a nutshell, not all SD cards offer the same speeds. This matters for some tasks more than it matters for others. For example, if you’re a professional photographer taking photos in rapid succession on a DSLR camera saving them in high-resolution RAW format, you’ll want a fast SD card so your camera can save them as fast as possible. A fast SD card is also important if you want to record high-resolution video and save it directly to the SD card. If you’re just taking a few photos on a typical consumer camera or you’re just using an SD card to store some media files on your smartphone, the speed isn’t as important. Manufacturers use “speed classes” to measure an SD card’s speed. The SD Association that defines the SD card standard doesn’t actually define the exact speeds associated with these classes, but they do provide guidelines. There are four different speed classes — 10, 8, 4, and 2. 10 is the fastest, while 2 is the slowest. Class 2 is suitable for standard definition video recording, while classes 4 and 6 are suitable for high-definition video recording. Class 10 is suitable for “full HD video recording” and “HD still consecutive recording.” There are also two Ultra High Speed (UHS) speed classes, but they’re more expensive and are designed for professional use. UHS cards are designed for devices that support UHS. Here are the associated logos, in order from slowest to fastest:       You’ll probably be okay with a class 4 or 6 card for typical use in a digital camera, smartphone, or tablet. Class 10 cards are ideal if you’re shooting high-resolution videos or RAW photos. Class 2 cards are a bit on the slow side these days, so you may want to avoid them for all but the cheapest digital cameras. Even a cheap smartphone can record HD video, after all. An SD card’s speed class is identified on the SD card itself. You’ll also see the speed class on the online store listing or on the card’s packaging when purchasing it. For example, in the below photo, the middle SD card is speed class 4, while the two other cards are speed class 6. If you see no speed class symbol, you have a class 0 SD card. These cards were designed and produced before the speed class rating system was introduced. They may be slower than even a class 2 card. Physical Size Different devices use different sizes of SD cards. You’ll find standard-size CD cards, miniSD cards, and microSD cards. Standard SD cards are the largest, although they’re still very small. They measure 32x24x2.1 mm and weigh just two grams. Most consumer digital cameras for sale today still use standard SD cards. They have the standard “cut corner”  design. miniSD cards are smaller than standard SD cards, measuring 21.5x20x1.4 mm and weighing about 0.8 grams. This is the least common size today. miniSD cards were designed to be especially small for mobile phones, but we now have a smaller size. microSD cards are the smallest size of SD card, measuring 15x11x1 mm and weighing just 0.25 grams. These cards are used in most cell phones and smartphones that support SD cards. They’re also used in many other devices, such as tablets. SD cards will only fit into marching slots. You can’t plug a microSD card into a standard SD card slot — it won’t fit. However, you can purchase an adapter that allows you to plug a smaller SD card into a larger SD card’s form and fit it into the appropriate slot. Capacity Like USB flash drives, hard drives, solid-state drives, and other storage media, different SD cards can have different amounts of storage. But the differences between SD card capacities don’t stop there. Standard SDSC (SD) cards are 1 MB to 2 GB in size, or perhaps 4 GB in size — although 4 GB is non-standard. The SDHC standard was created later, and allows cards 2 GB to 32 GB in size. SDXC is a more recent standard that allows cards 32 GB to 2 TB in size. You’ll need a device that supports SDHC or SDXC cards to use them. At this point, the vast majority of devices should support SDHC. In fact, the SD cards you have are probably SDHC cards. SDXC is newer and less common. When buying an SD card, you’ll need to buy the right speed class, size, and capacity for your needs. Be sure to check what your device supports and consider what speed and capacity you’ll actually need. Image Credit: Ryosuke SEKIDO on Flickr, Clive Darra on Flickr, Steven Depolo on Flickr

  Read the article

• PeopleSoft at Alliance 2012 Executive Forum

  - by John Webb

  Guest Posting From Rebekah Jackson This week I jointed over 4,800 Higher Ed and Public Sector customers and partners in Nashville at our annual Alliance conference.   I got lost easily in the hallways of the sprawling Gaylord Opryland Hotel. I carried the resort map with me, and I would still stand for several minutes at a very confusing junction, studying the map and the signage on the walls. Hallways led off in many directions, some with elevators going down here and stairs going up there. When I took a wrong turn I would instantly feel stuck, lose my bearings, and occasionally even have to send out a call for help.    It strikes me that the theme for the Executive Forum this year outlines a less tangible but equally disorienting set of challenges that our higher education customer’s CIOs are facing: Making Decisions at the Intersection of Business Value, Strategic Investment, and Enterprise Technology. The forces acting upon higher education institutions today are not neat, straight-forward decision points, where one can glance to the right, glance to the left, and then quickly choose the best course of action. The operational, technological, and strategic factors that must be considered are complex, interrelated, messy…and the stakes are high. Michael Horn, co-author of “Disrupting Class: How Disruptive Innovation Will Change the Way the World Learns”, set the tone for the day. He introduced the model of disruptive innovation, which grew out of the research he and his colleagues have done on ‘Why Successful Organizations Fail’. Highly simplified, the pattern he shared is that things start out decentralized, take a leap to extreme centralization, and then experience progressive decentralization. Using computers as an example, we started with a slide rule, then developed the computer which centralized in the form of mainframes, and gradually decentralized to mini-computers, desktop computers, laptops, and now mobile devices. According to Michael, you have more computing power in your cell phone than existed on the planet 60 years ago, or was on the first rocket that went to the moon. Applying this pattern to Higher Education means the introduction of expensive and prestigious private universities, followed by the advent of state schools, then by community colleges, and now online education. Michael shared statistics that indicate 50% of students will be taking at least one on line course by 2014…and by some measures, that’s already the case today. The implication is that technology moves from being the backbone of the campus, the IT department’s domain, and pushes into the academic core of the institution. Innovative programs are underway at many schools like Bellevue and BYU Idaho, joined by startups and disruptive new players like the Khan Academy.   This presents both threat and opportunity for higher education institutions, and means that IT decisions cannot afford to be disconnected from the institution’s strategic plan. Subsequent sessions explored this theme.    Theo Bosnak, from Attain, discussed the model they use for assessing the complete picture of an institution’s financial health. Compounding the issue are the dramatic trends occurring in technology and the vendors that provide it. Ovum analyst Nicole Engelbert, shared her insights next and suggested that incremental changes are no longer an option, instead fundamental changes are affecting the landscape of enterprise technology in higher ed.    Nicole closed with her recommendation that institutions focus on the trends in higher education with an eye towards the strategic requirements and business value first. Technology then is the enabler.   The last presentation of the day was from Tom Fisher, Sr. Vice President of Cloud Services at Oracle. Tom runs the delivery arm of the Cloud Services group, and shared his thoughts candidly about his experiences with cloud deployments as well as key issues around managing costs and security in cloud deployments. Okay, we’ve covered a lot of ground at this point, from financials planning, business strategy, and cloud computing, with the possibility that half of the institutions in the US might not be around in their current form 10 years from now. Did I forget to mention that was raised in the morning session? Seems a little hard to believe, and yet Michael Horn made a compelling point. Apparently 100 years ago, 8 of the top 10 education institutions in the world were German. Today, the leading German school is ranked somewhere in the 40’s or 50’s. What will the landscape be 100 years from now? Will there be an institution from China, India, or Brazil in the top 10? As Nicole suggested, maybe US parents will be sending their children to schools overseas much sooner, faced with the ever-increasing costs of a US based education. Will corporations begin to view skill-based certification from an online provider as a viable alternative to a 4 year degree from an accredited institution, fundamentally altering the education industry as we know it?

  Read the article

• Ok it has been pointed out to me

  - by Ratman21

  That it seems my blog is more of poor me or pity me or I deserve a job blog.   Hmmm I wont say, I have not wined here as I have used this blog to vent my frustration on the whole out of work thing (lack of money, self worth, family issues and the never end bills coming my way) but, it was also me trying to reach to others in the same boat as well as advertising, hay I am out here, employers.   It was also said, that I don’t have any thing listed here on me, like a cover letter or resume. Well there is but, it was so many months and post ago. Also what I had posted is not current. So here is my most current cover and resume.   Scott L Newman 45219 Dutton Way Callahan, Fl. 32011 To Whom It May Concern: I am really interested in the IT vacancie that you have listed for your company. Maybe I don’t have all the qualifications you want (hold on don’t hit delete yet) yet! But maybe I do, as I have over 20 + years experience in "IT” RIGHT NOW.   Read the rest of my cover and my resume. You will see what my “IT” skills are and it will Show that I can to this work! I can bring to your company along with my, can do attitude, a broad range of skills, including: Certified CompTIA A+, Security+  and Network+ Technician §         2.5 years (NOC) Network experience on large Cisco based Wan – UK to Austria §         20 years experience MIS/DP – Yes I can do IBM mainframes and Tandem  non-stops too §         18 years experience as technical Help Desk support – panicking users, no problem §         18 years experience with PC/Server based system, intranet and internet systems §         10+ years experienced on: Microsoft Office, Windows XP and Data Network Fundamentals (YES I do windows) §         Strong trouble shooting skills for software, hard ware and circuit issues (and I can tell you what kind of horrors I had to face on all of them). §         Very experienced on working with customers on problems – again panicking users, no problem §         Working experience with Remote Access (VPN/SecurID) – I didn’t just study them I worked on/with them §         Skilled in getting info for and creating documentation for Operation procedures (I don’t just wait for them to give it to me I go out and get it. Waiting for info on working applications is, well dumb) Multiple software languages (Hey I have done some programming) And much more experiences in “IT” (Mortgage, stocks and financial information systems experience and have worked “IT” in a hospital) Can multitask, also have ability to adapt to change and learn quickly. (once was put in charge of a system that I had not worked with for over two years. Talk about having to relearn and adapt to changes but, I did it.) I would welcome the opportunity to further discuss this position with you. If you have questions or would like to schedule an interview, please contact me by phone at 904-879-4880 or on my cell 352-356-0945 or by e-mail at [email protected] or leave a message on my web site (http://beingscottnewman.webs.com/). I have enclosed/attached my resume for your review and I look forward to hearing from you.   Thank you for taking a moment to consider my cover letter and resume. I appreciate how busy you are. Sincerely, Scott L. Newman    Scott L. Newman 45219 Dutton Way, Callahan, FL 32011? H (904)879-4880 C (352)356-0945 ? [email protected] Web - http://beingscottnewman.webs.com/                                                       ______                                                                                       OBJECTIVE To obtain a Network Operation or Helpdesk position.     PROFILE Information Technology Professional with 20+ years of experience. Volunteer website creator and back-up sound technician at True Faith Christian Fellowship. CompTIA A+, Network+ and Security+ Certified.   TECHNICAL AND PROFESSIONAL SKILLS   §         Technical Support §         Frame Relay §         Microsoft Office Suite §         Inventory Management §         ISDN §         Windows NT/98/XP §         Client/Vendor Relations §         CICS §         Cisco Routers/Switches §         Networking/Administration §         RPG §         Helpdesk §         Website Design/Dev./Management §         Assembler §         Visio §         Programming §         COBOL IV §               EDUCATION ? New HorizonsComputerLearningCenter, Jacksonville, Florida – CompTIA A+, Security+ and Network+ Certified.             Currently working on CCNA Certification ?MottCommunity College, Flint, Michigan – Associates Degree - Data Processing and General Education ? Currently studying Japanese     PROFESSIONAL             TrueFaithChristianFellowshipChurch – Callahan, FL, October 2009 – Present Web site Tech ·        Web site Creator/tech, back up song leader and back up sound technician. Note church web site is (http://ambassadorsforjesuschrist.webs.com/) U.S. Census (temp employee) Feb. 23 to March 8, 2010 ·        Enumerator for NassauCounty   ThomasCreekBaptistChurch – Callahan, FL,     June 2008 – September 2009 Churchsound and video technician      ·        sound and video technician           Fidelity National Information Services ? Jacksonville, FL ? February 01, 2005 to October 28, 2008 Client Server Dev/Analyst I ·        Monitored Multiple Debit Card sites, Check Authorization customers and the Card Auth system (AuthNet) for problems with the sites, connections, servers (on our LAN) and/or applications ·        Night (NOC) Network operator for a large Wide Area Network (WAN) ·        Monitored Multiple Check Authorization customers for problems with circuits, routers and applications ·        Resolved circuit and/or router issues or assist circuit carrier in resolving issue ·        Resolved application problems or assist application support in resolution ·        Liaison between customer and application support ·        Maintained and updated the NetOps Operation procedures Guide ·        Kept the listing of equipment on the raised floor updated ·        Involved in the training of all Night Check and Card server operation operators ·        FNIS acquired Certegy in 2005. Was one of 3 kept on.   Certegy ? St.Pete, FL ? August 31, 2003 to February 1, 2005 Senior NetOps Operator(FNIS acquired Certegy in 2005 all of above jobs/skills were same as listed in FNIS) ·        Converting Documentation to Adobe format ·        Sole trainer of day/night shift System Management Center operators (SMC) ·        Equifax spun off Card/Check Dept. as Certegy. Certegy terminated contract with EDS. One of six in the whole IT dept that was kept on.   EDS  (Certegy Account) ? St.Pete, FL ? July 1, 1999 to August 31, 2003 Senior NetOps Operator ·        Equifax outsourced the NetOps dept. to EDS in 1999. ·        Same job skills as listed above for FNIS.   Equifax ? St.Pete&Tampa, FL ? January 1, 1991 to July 1, 1999 NetOps/Tandem Operator ·        All of the above for FNIS, except for circuit and router issues ·        Operated, monitored and trouble shot Tandem mainframe and servers on LAN ·        Supported in the operation of the Print, Tape and Microfiche rooms ·        Equifax acquired TelaCredit in 1991.   TelaCredit ? Tampa, FL ? June 28, 1989 to January 1, 1991 Tandem Operator ·        Operated and monitored Tandem Non-stop systems for Card and Check Auths ·        Operated multiple high-speed Laser printers and Microfiche printers ·        Mounted, filed and maintained 18 reel-to-reel mainframe tape drives, cartridges tape drives and tape library.

  Read the article

• Unexpected advantage of Engineered Systems

  - by user12244672

  It's not surprising that Engineered Systems accelerate the debugging and resolution of customer issues. But what has surprised me is just how much faster issue resolution is with Engineered Systems such as SPARC SuperCluster. These are powerful, complex, systems used by customers wanting extreme database performance, app performance, and cost saving server consolidation. A SPARC SuperCluster consists or 2 or 4 powerful T4-4 compute nodes, 3 or 6 extreme performance Exadata Storage Cells, a ZFS Storage Appliance 7320 for general purpose storage, and ultra fast Infiniband switches.  Each with its own firmware. It runs Solaris 11, Solaris 10, 11gR2, LDoms virtualization, and Zones virtualization on the T4-4 compute nodes, a modified version of Solaris 11 in the ZFS Storage Appliance, a modified and highly tuned version of Oracle Linux running Exadata software on the Storage Cells, another Linux derivative in the Infiniband switches, etc. It has an Infiniband data network between the components, a 10Gb data network to the outside world, and a 1Gb management network. And customers can run whatever middleware and apps they want on it, clustered in whatever way they want. In one word, powerful.  In another, complex. The system is highly Engineered.  But it's designed to run general purpose applications. That is, the physical components, configuration, cabling, virtualization technologies, switches, firmware, Operating System versions, network protocols, tunables, etc. are all preset for optimum performance and robustness. That improves the customer experience as what the customer runs leverages our technical know-how and best practices and is what we've tested intensely within Oracle. It should also make debugging easier by fixing a large number of variables which would otherwise be in play if a customer or Systems Integrator had assembled such a complex system themselves from the constituent components.  For example, there's myriad network protocols which could be used with Infiniband.  Myriad ways the components could be interconnected, myriad tunable settings, etc. But what has really surprised me - and I've been working in this area for 15 years now - is just how much easier and faster Engineered Systems have made debugging and issue resolution. All those error opportunities for sub-optimal cabling, unusual network protocols, sub-optimal deployment of virtualization technologies, issues with 3rd party storage, issues with 3rd party multi-pathing products, etc., are simply taken out of the equation. All those error opportunities for making an issue unique to a particular set-up, the "why aren't we seeing this on any other system ?" type questions, the doubts, just go away when we or a customer discover an issue on an Engineered System. It enables a really honed response, getting to the root cause much, much faster than would otherwise be the case. Here's a couple of examples from the last month, one found in-house by my team, one found by a customer: Example 1: We found a node eviction issue running 11gR2 with Solaris 11 SRU 12 under extreme load on what we call our ExaLego test system (mimics an Exadata / SuperCluster 11gR2 Exadata Storage Cell set-up).  We quickly established that an enhancement in SRU12 enabled an 11gR2 process to query Infiniband's Subnet Manager, replacing a fallback mechanism it had used previously.  Under abnormally heavy load, the query could return results which were misinterpreted resulting in node eviction.  In several daily joint debugging sessions between the Solaris, Infiniband, and 11gR2 teams, the issue was fully root caused, evaluated, and a fix agreed upon.  That fix went back into all Solaris releases the following Monday.  From initial issue discovery to the fix being put back into all Solaris releases was just 10 days. Example 2: A customer reported sporadic performance degradation.  The reasons were unclear and the information sparse.  The SPARC SuperCluster Engineered Systems support teams which comprises both SPARC/Solaris and Database/Exadata experts worked to root cause the issue.  A number of contributing factors were discovered, including tunable parameters.  An intense collaborative investigation between the engineering teams identified the root cause to a CPU bound networking thread which was being starved of CPU cycles under extreme load.  Workarounds were identified.  Modifications have been put back into 11gR2 to alleviate the issue and a development project already underway within Solaris has been sped up to provide the final resolution on the Solaris side.  The fixed SPARC SuperCluster configuration greatly aided issue reproduction and dramatically sped up root cause analysis, allowing the correct workarounds and fixes to be identified, prioritized, and implemented.  The customer is now extremely happy with performance and robustness.  Since the configuration is common to other customers, the lessons learned are being proactively rolled out to other customers and incorporated into the installation procedures for future customers.  This effectively acts as a turbo-boost to performance and reliability for all SPARC SuperCluster customers.  If this had occurred in a "home grown" system of this complexity, I expect it would have taken at least 6 months to get to the bottom of the issue.  But because it was an Engineered System, known, understood, and qualified by both the Solaris and Database teams, we were able to collaborate closely to identify cause and effect and expedite a solution for the customer.  That is a key advantage of Engineered Systems which should not be underestimated.  Indeed, the initial issue mitigation on the Database side followed by final fix on the Solaris side, highlights the high degree of collaboration and excellent teamwork between the Oracle engineering teams.  It's a compelling advantage of the integrated Oracle Red Stack in general and Engineered Systems in particular.

  Read the article

• Atheros 922 PCI WIFI is disabled in Unity but enabled in terminal - How to get it to work?

  - by zewone

  I am trying to get my PCI Wireless Atheros 922 card to work. It is disabled in Unity: both the network utility and the desktop (see screenshot http://www.amisdurailhalanzy.be/Screenshot%20from%202012-10-25%2013:19:54.png) I tried many different advises on many different forums. Installed 12.10 instead of 12.04, enabled all interfaces... etc. I have read about the aht9 driver... The terminal shows no hw or sw lock for the Atheros card, nevertheless, it is still disabled. Nothing worked so far, the card is still disabled. Any help is much appreciated. Here are more tech details: myuser@adri1:~$ sudo lshw -C network *-network:0 DISABLED description: Wireless interface product: AR922X Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 2 bus info: pci@0000:03:02.0 logical name: wlan1 version: 01 serial: 00:18:e7:cd:68:b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-17-generic firmware=N/A latency=168 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:d8000000-d800ffff *-network:1 description: Ethernet interface product: VT6105/VT6106S [Rhine-III] vendor: VIA Technologies, Inc. physical id: 6 bus info: pci@0000:03:06.0 logical name: eth0 version: 8b serial: 00:11:09:a3:76:4a size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=via-rhine driverversion=1.5.0 duplex=half latency=32 link=no maxlatency=8 mingnt=3 multicast=yes port=MII speed=10Mbit/s resources: irq:18 ioport:d300(size=256) memory:d8013000-d80130ff *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:8.1 logical name: wlan0 serial: 00:11:09:51:75:36 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2500usb driverversion=3.5.0-17-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg myuser@adri1:~$ sudo rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy1: Wireless LAN Soft blocked: no Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no myuser@adri1:~$ dmesg | grep wlan0 [ 15.114235] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready myuser@adri1:~$ dmesg | egrep 'ath|firm' [ 14.617562] ath: EEPROM regdomain: 0x30 [ 14.617568] ath: EEPROM indicates we should expect a direct regpair map [ 14.617572] ath: Country alpha2 being used: AM [ 14.617575] ath: Regpair used: 0x30 [ 14.637778] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control' [ 14.639410] Registered led device: ath9k-phy0 myuser@adri1:~$ dmesg | grep wlan1 [ 15.119922] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready myuser@adri1:~$ lspci -nn | grep 'Atheros' 03:02.0 Network controller [0280]: Atheros Communications Inc. AR922X Wireless Network Adapter [168c:0029] (rev 01) myuser@adri1:~$ sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:11:09:a3:76:4a inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::211:9ff:fea3:764a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5457 errors:0 dropped:0 overruns:0 frame:0 TX packets:2548 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3425684 (3.4 MB) TX bytes:282192 (282.1 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:590 errors:0 dropped:0 overruns:0 frame:0 TX packets:590 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:53729 (53.7 KB) TX bytes:53729 (53.7 KB) myuser@adri1:~$ sudo iwconfig wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on lo no wireless extensions. eth0 no wireless extensions. wlan1 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off myuser@adri1:~$ lsmod | grep "ath9k" ath9k 116549 0 mac80211 461161 3 rt2x00usb,rt2x00lib,ath9k ath9k_common 13783 1 ath9k ath9k_hw 376155 2 ath9k,ath9k_common ath 19187 3 ath9k,ath9k_common,ath9k_hw cfg80211 175375 4 rt2x00lib,ath9k,mac80211,ath myuser@adri1:~$ iwlist scan wlan0 Failed to read scan data : Network is down lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan1 Failed to read scan data : Network is down myuser@adri1:~$ lsb_release -d Description: Ubuntu 12.10 myuser@adri1:~$ uname -mr 3.5.0-17-generic i686  Any help much appreciated... Thanks, Philippe 31-10-2012 ... I have some more updates. When I do the following command it does see my Wifi router... So even if it is still disabled... the card seems to work and see the router (ESSID:"5791BC26-CE9C-11D1-97BF-0000F81E") See below: sudo iwlist wlan1 scanning wlan1 Scan completed : Cell 01 - Address: 00:19:70:8F:B0:EA Channel:10 Frequency:2.457 GHz (Channel 10) Quality=51/70 Signal level=-59 dBm Encryption key:on ESSID:"5791BC26-CE9C-11D1-97BF-0000F81E" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000025dbf2188 Extra: Last beacon: 108ms ago IE: Unknown: 002035373931424332362D434539432D313144312D393742462D3030303046383145 IE: Unknown: 010882848B960C121824 IE: Unknown: 03010A IE: Unknown: 0706424520010D14 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 2A0100 IE: Unknown: 32043048606C IE: Unknown: DD180050F2020101030003A4000027A4000042435E0062322F00 IE: Unknown: DD0900037F01010000FF7F IE: Unknown: DD0A00037F04010000000000

  Read the article

• NDepend Evaluation: Part 3

  - by Anthony Trudeau

  NDepend is a Visual Studio add-in designed for intense code analysis with the goal of high code quality. NDepend uses a number of metrics and aggregates the data in pleasing static and active visual reports. My evaluation of NDepend will be broken up into several different parts. In the first part of the evaluation I looked at installing the add-in.  And in the last part I went over my first impressions including an overview of the features.  In this installment I provide a little more detail on a few of the features that I really like. Dependency Matrix The dependency matrix is one of the rich visual components provided with NDepend.  At a glance it lets you know where you have coupling problems including cycles.  It does this with number indicating the weight of the dependency and a color-coding that indicates the nature of the dependency. Green and blue cells are direct dependencies (with the difference being whether the relationship is from row-to-column or column-to-row).  Black cells are the ones that you really want to know about.  These indicate that you have a cycle.  That is, type A refers to type B and type B also refers to Type A. But, that’s not the end of the story.  A handy pop-up appears when you hover over the cell in question.  It explains the color, the dependency, and provides several interesting links that will teach you more than you want to know about the dependency. You can double-click the problem cells to explode the dependency.  That will show the dependencies on a method-by-method basis allowing you to more easily target and fix the problem.  When you’re done you can click the back button on the toolbar. Dependency Graph The dependency graph is another component provided.  It’s complementary to the dependency matrix, but it isn’t as easy to identify dependency issues using the window. On a positive note, it does provide more information than the matrix. My biggest issue with the dependency graph is determining what is shown.  This was not readily obvious.  I ended up using the navigation buttons to get an acceptable view.  I would have liked to choose what I see. Once you see the types you want you can get a decent idea of coupling strength based on the width of the dependency lines.  Double-arrowed lines are problematic and are shown in red.  The size of the boxes will be related to the metric being displayed.  This is controlled using the Box Size drop-down in the toolbar.  Personally, I don’t find the size of the box to be helpful, so I change it to Constant Font. One nice thing about the display is that you can see the entire path of dependencies when you hover over a type.  This is done by color-coding the dependencies and dependants.  It would be nice if selecting the box for the type would lock the highlighting in place. I did find a perhaps unintended work-around to the color-coding.  You can lock the color-coding in by hovering over the type, right-clicking, and then clicking on the canvas area to clear the pop-up menu.  You can then do whatever with it including saving it to an image file with the color-coding. CQL NDepend uses a code query language (CQL) to work with your code just like it was a database.  CQL cannot be confused with the robustness of T-SQL or even LINQ, but it represents an impressive attempt at providing an expressive way to enumerate and interrogate your code. There are two main windows you’ll use when working with CQL.  The CQL Query Explorer allows you to define what queries (rules) are run as part of a report – I immediately unselected rules that I don’t want in my results.  The CQL Query Edit window is where you can view or author your own rules.  The explorer window is pretty self-explanatory, so I won’t mention it further other than to say that any queries you author will appear in the custom group. Authoring your own queries is really hard to screw-up.  The Intellisense-like pop-ups tell you what you can do while making composition easy.  I was able to create a query within two minutes of playing with the editor.  My query warns if any types that are interfaces don’t start with an “I”. WARN IF Count > 0 IN SELECT TYPES WHERE IsInterface AND !NameLike “I” The results from the CQL Query Edit window are immediate. That fact makes it useful for ad hoc querying.  It’s worth mentioning two things that could make the experience smoother.  First, out of habit from using Visual Studio I expect to be able to scroll and press Tab to select an item in the list (like Intellisense).  You have to press Enter when you scroll to the item you want.  Second, the commands are case-sensitive.  I don’t see a really good reason to enforce that. CQL has a lot of potential not just in enforcing code quality, but also enforcing architectural constraints that your enterprise has defined. Up Next My next update will be the final part of the evaluation.  I will summarize my experience and provide my conclusions on the NDepend add-in. ** View Part 1 of the Evaluation ** ** View Part 2 of the Evaluation ** Disclaimer: Patrick Smacchia contacted me about reviewing NDepend. I received a free license in return for sharing my experiences and talking about the capabilities of the add-in on this site. There is no expectation of a positive review elicited from the author of NDepend.

  Read the article

• Building Enterprise Smartphone App &ndash; Part 2: Platforms and Features

  - by Tim Murphy

  This is part 2 in a series of posts based on a talk I gave recently at the Chicago Information Technology Architects Group.  Feel free to leave feedback. In the previous post I discussed what reasons a company might have for creating a smartphone application.  In this installment I will cover some of history and state of the different platforms as well as features that can be leveraged for building enterprise smartphone applications. Platforms Before you start choosing a platform to develop your solutions on it is good to understand how we got here and what features you can leverage. History To my memory we owe all of this to a product called the Apple Newton that came out in 1987. It was the first PDA and back then I was much more of an Apple fan.  I was very impressed with this device even though it never really went anywhere.  The Palm Pilot by US Robotics was the next major advancement in PDA. It had a simple short hand window that allowed for quick stylus entry.. Later, Windows CE came out and started the broadening of the PDA market. After that it was the Palm and CE operating systems that started showing up on cell phones and for some time these were the two dominant operating systems that were distributed with devices from multiple hardware vendors. Current The iPhone was the first smartphone to take away the stylus and give us a multi-touch interface.  It was a revolution in usability and really changed the attractiveness of smartphones for the general public.  This brought us to the beginning of the current state of the market with the concept of an online store that makes it easy for customers to get new features and functionality on demand. With Android, Google made this more than a one horse race.  Not only did they come to compete, their low cost actually made them the leading OS.  Of course what made Android so attractive also is its major fault.  It is so open that it has been a target for malware which leaves consumers exposed.  Fortunately for Google though, most consumers aren’t aware of the threat that they are under. Although Microsoft had put out one of the first smart phone operating systems with CE it had to play catch up and finally came out with the Windows Phone.  They have gone for a market approach between those of iOS and Android.  They support multiple hardware vendors like Google, but they kept a certification process for applications that is similar to Apple.  They also created a user interface that was different enough to give it a clear separation from the other two platforms. The result of all this is hundreds of millions of smartphones being sold monthly across all three platforms giving us a wide range of choices and challenges when it comes to developing solutions. Features So what are the features that make these devices flexible enough be considered for use in the enterprise? The biggest advantage of today's devices is network connectivity.  The ability to access information from multiple sources at a moment’s notice is critical for businesses.  Add to that the ability to communicate over a variety of text, voice and video modes and we have a powerful starting point. Every smartphone has a cameras and they are not just useful for posting to Instagram. We are seeing more applications such as Bing vision that allow us to scan just about any printed code or text to find information.  These capabilities have been made available to developers in the form of standard libraries for reading barcodes of just about an flavor and optical character recognition (OCR) interpretation. Bluetooth give us the ability to communicate with multiple devices. Whether these are headsets, keyboard or printers the wireless communication capabilities are just starting to evolve.  The more these wireless communication protocols grow, the more opportunities we will see to transfer data between users and a variety of devices. Local storage of information that can be called up even when the device cannot reach the network is the other big capability.  This give users the ability to work offline as well and transmit information when connections are restored. These are the tools that we have to work with to build applications that can be leveraged to gain a competitive advantage for companies that implement them. Coming Up In the third installment I will cover key concerns that you face when building enterprise smartphone apps. del.icio.us Tags: smartphones,enterprise smartphone Apps,architecture,iOS,Android,Windows Phone

  Read the article

• Can't control connection bit rate using iwconfig with Atheros TL-WN821N (AR7010)

  - by Paul H

  I'm trying to reduce the connection bit rate on my Atheros TP-Link TL-WN821N v3 usb wifi adapter due to frequent instability issues (reported connection speed goes down to 1Mb/s and I have to physically reconnect the adapter to regain a connection). I know this is a common problem with this device, and I have tried everything I can think of to fix it, including using drivers from linux-backports; compiling and installing a custom firmware (following instructions on https://wiki.debian.org/ath9k_htc#fw-free) and (as a last resort) using ndiswrapper. When using ndiswrapper, the wifi adapter is stable and operates in g mode at 54Mb/s (whilst when using the default ath9k_htc module, the adapter connects in n mode and the bit rate fluctuates constantly). Unfortunately, with this setup I have to run my processor using only one core, since using SMP with ndiswrapper causes a kernel oops on my system. So I want to lock my bit rate to 54Mb/s (or less, if need be) for connection stability, using the ath9k_htc module. I've tried 'sudo iwconfig wlan0 rate 54M'; the command runs with no error but when I check the bit rate with 'sudo iwlist wlan0 bitrate' the command returns: wlan0 unknown bit-rate information. Current Bit Rate:78 Mb/s Any ideas? Here's some info (hopefully relevant) on my setup: Xubuntu (12.04.3) 64bit (kernel 3.2.0-55.85-generic) using Network Manager. My Router is from Virgin Media, the VMDG480. lshw -C network : *-network description: Wireless interface physical id: 1 bus info: usb@1:4 logical name: wlan0 serial: 74:ea:3a:8f:16:b6 capabilities: ethernet physical wireless configuration: broadcast=yes driver=ath9k_htc driverversion=3.2.0-55 firmware=1.3 ip=192.168.0.9 link=yes multicast=yes wireless=IEEE 802.11bgn lsusb -v: Bus 001 Device 003: ID 0cf3:7015 Atheros Communications, Inc. TP-Link TL-WN821N v3 802.11n [Atheros AR7010+AR9287] Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 idVendor 0x0cf3 Atheros Communications, Inc. idProduct 0x7015 TP-Link TL-WN821N v3 802.11n [Atheros AR7010+AR9287] bcdDevice 2.02 iManufacturer 16 ATHEROS iProduct 32 UB95 iSerial 48 12345 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 60 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 6 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x06 EP 6 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) iwlist wlan0 scanning: wlan0 Scan completed : Cell 01 - Address: C4:3D:C7:3A:1F:5D Channel:1 Frequency:2.412 GHz (Channel 1) Quality=37/70 Signal level=-73 dBm Encryption key:on ESSID:"my essid" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Master Extra:tsf=00000070cca77186 Extra: Last beacon: 5588ms ago IE: Unknown: 0007756E69636F726E IE: Unknown: 010882848B962430486C IE: Unknown: 030101 IE: Unknown: 2A0100 IE: Unknown: 2F0100 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 32040C121860 IE: Unknown: 2D1AFC181BFFFF000000000000000000000000000000000000000000 IE: Unknown: 3D1601080400000000000000000000000000000000000000 IE: Unknown: DD7E0050F204104A0001101044000102103B00010310470010F99C335D7BAC57FB00137DFA79600220102100074E657467656172102300074E6574676561721024000631323334353610420007303030303030311054000800060050F20400011011000743473331303144100800022008103C0001011049000600372A000120 IE: Unknown: DD090010180203F02C0000 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00 iwconfig: lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"my essid" Mode:Managed Frequency:2.412 GHz Access Point: C4:3D:C7:3A:1F:5D Bit Rate=78 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=36/70 Signal level=-74 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0,

  Read the article

• UITableView : crash when adding a section footer view in empty section

  - by Supernico

  Hi everyone, This is the first time I ask a question here, but I have to say this site has been a tremendous help for me over the last couple months (iphone-dev-wise), and I thank you for that. However, I didn't find any solution for this problem I'm having: I have a UITableView with 2 sections, and no rows when the app is launched for the first time. The user can fill the sections later on as he wishes (the content is not relevant here). The UITableView looks good when filled with rows, but looks pretty ugly when there is none (the 2 header sections are stuck together with no white space in between). That is why I'd like to add a nice "No row" view in between when there is no row. I used viewForFooterInSection: - (CGFloat)tableView:(UITableView *)tableView heightForFooterInSection:(NSInteger)section { if(section == 0) { if([firstSectionArray count] == 0) return 44; else return 0; } return 0; } - (UIView *)tableView:(UITableView *)tableView viewForFooterInSection:(NSInteger)section{ if(section == 0) { UILabel *label = [[UILabel alloc] initWithFrame:CGRectMake(200, 10, 50, 44)]; label.backgroundColor = [UIColor clearColor]; label.textColor = [UIColor colorWithWhite:0.6 alpha:1.0]; label.textAlignment = UITextAlignmentCenter; label.lineBreakMode = UILineBreakModeWordWrap; label.numberOfLines = 0; label.text = @"No row"; return [label autorelease]; } return nil; } - (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView { return 2; } - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { if(section == 0) { return [firstSectionArray count]; } return [secondSectionArray count]; } This works great : the footer view appears only when there is no row in section 0. But my app crashes when I enter edit mode and delete the last row in section 0: Assertion failure in -[UIViewAnimation initWithView:indexPath:endRect:endAlpha:startFraction:endFraction:curve:animateFromCurrentPosition:shouldDeleteAfterAnimation:editing:] Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'Cell animation stop fraction must be greater than start fraction' This does not happen when there are several rows in section 0. It only happens when there is only one row left. Here's the code for edit mode: - (void)tableView:(UITableView *)tableView commitEditingStyle:(UITableViewCellEditingStyle)editingStyle forRowAtIndexPath:(NSIndexPath *)indexPath { // If row is deleted, remove it from the list. if (editingStyle == UITableViewCellEditingStyleDelete) { // Find the book at the deleted row, and remove from application delegate's array. if(indexPath.section == 0) { [firstSectionArray removeObjectAtIndex:indexPath.row]; } else { [secondSectionArray removeObjectAtIndex:indexPath.row]; } // Animate the deletion from the table. [tableView deleteRowsAtIndexPaths:[NSArray arrayWithObject:indexPath] withRowAnimation:UITableViewRowAnimationBottom]; [tableView reloadData]; } } Does anyone have any idea why this is happening? Thanks

  Read the article

• Expand and Shrink UIScrollView with animation

  - by Dilip Rajkumar

  I am having a UITableView inside a scrollview. So I am trying to do a accordion like component using UITableView. So I need to expand the UITableView to add more cell. In that case I have to increase the height of UIScrollView with a animation so that it matches the table animation. - (NSIndexPath *)tableView:(UITableView *)tableView willSelectRowAtIndexPath:(NSIndexPath *)indexPath { NSInteger row = [indexPath row]; BOOL preventReopen = NO; if (row == expandedRowIndex + 1 && expandedRowIndex != -1) return nil; [tableView beginUpdates]; if (expandedRowIndex != -1) { familyTableView.frame = CGRectMake(familyTableView.frame.origin.x, familyTableView.frame.origin.y, familyTableView.frame.size.width, 3*50+22); toolsTableView.frame = CGRectMake(toolsTableView.frame.origin.x, familyTableView.frame.origin.y + familyTableView.frame.size.height + 20, toolsTableView.frame.size.width, 4*50+22); myAccountTableView.frame = CGRectMake(myAccountTableView.frame.origin.x, toolsTableView.frame.origin.y + toolsTableView.frame.size.height + 20, myAccountTableView.frame.size.width, 2*50+22); settingsScrollView.contentSize = CGSizeMake(320, familyTableView.frame.size.height + toolsTableView.frame.size.height+ myAccountTableView.frame.size.height + 380); settingsScrollView.contentInset = UIEdgeInsetsMake(0, 0, familyTableView.frame.size.height + toolsTableView.frame.size.height+ myAccountTableView.frame.size.height + 380, 0); NSInteger rowToRemove = expandedRowIndex + 1; preventReopen = row == expandedRowIndex; if (row > expandedRowIndex) row--; expandedRowIndex = -1; [tableView deleteRowsAtIndexPaths:[NSArray arrayWithObject:[NSIndexPath indexPathForRow:rowToRemove inSection:0]] withRowAnimation:UITableViewRowAnimationTop]; }else { familyTableView.frame = CGRectMake(familyTableView.frame.origin.x, familyTableView.frame.origin.y, familyTableView.frame.size.width, (3*50+22) + 100); toolsTableView.frame = CGRectMake(toolsTableView.frame.origin.x, familyTableView.frame.origin.y + familyTableView.frame.size.height + 20, toolsTableView.frame.size.width, 4*50+22); myAccountTableView.frame = CGRectMake(myAccountTableView.frame.origin.x, toolsTableView.frame.origin.y + toolsTableView.frame.size.height + 20, myAccountTableView.frame.size.width, 2*50+22); settingsScrollView.contentSize = CGSizeMake(320, familyTableView.frame.size.height + toolsTableView.frame.size.height+ myAccountTableView.frame.size.height + 380); settingsScrollView.contentInset = UIEdgeInsetsMake(0, 0, familyTableView.frame.size.height + toolsTableView.frame.size.height+ myAccountTableView.frame.size.height + 380, 0); } NSInteger rowToAdd = -1; if (!preventReopen) { rowToAdd = row + 1; expandedRowIndex = row; [tableView insertRowsAtIndexPaths:[NSArray arrayWithObject:[NSIndexPath indexPathForRow:rowToAdd inSection:0]] withRowAnimation:UITableViewRowAnimationTop]; } [tableView endUpdates]; return nil; } I am not good at animation. Any help is greatly appreciated. What I need is when we do [tableView beginUpdates] we have to start animating the resize effect to UIScrollView and it should end when [tableView endUpdates] executes. So the Accordion executes flawlessly. Thanks in advance for any help..

  Read the article

• Finding edge and corner values of an image in matlab

  - by James

  Hi, this problem links to two other questions i've asked on here. I am tracing the outline of an image and plotting this to a dxf file. I would like to use the bwboundaries function to find the coordinates of the edges of the image, find the corner coordinates using the cornermetric function and then remove any edge coordinates that are not a corner. The important thing I need to be able to do is keep the order of the corner elements obtained from bwboundaries, so that the section traces properly. The dxf function I have that draws from the coordinates draws lines between coordinates that are next to each other, so the line has to be drawn "around" the section rather than straight between the corner points. The reason I am doing this is because there are less coordinates obtained this way, so it is easier to amend the dxf file (as there are less points to manipulate). The code I have so far is: %# Shape to be traced bw = zeros(200); bw(20:40,20:180) = 1; bw(20:180,90:110) = 1; bw(140:180,20:185) = 1; %# Boundary Finding Section [Boundary] = bwboundaries(bw); %Traces the boundary of each section figure, imshow(bw); hold on; colors=['b' 'g' 'r' 'c' 'm' 'y']; for k=1:length(Boundary) perim = Boundary{k}; %Obtains perimeter coordinates (as a 2D matrix) from the cell array cidx = mod(k,length(colors))+1;% Obtains colours for the plot plot(perim(:,2), perim(:,1),... colors(cidx),'LineWidth',2); end Coordmat = cell2mat(Boundary) %Converts the traced regions to a matrix X = Coordmat(:,1) Y = Coordmat(:,2) % This gives the edge coordinates in matrix form %% Corner Finding Section (from Jonas' answer to a previous question %# get corners cornerProbability = cornermetric(bw); cornerIdx = find(cornerProbability==max(cornerProbability(:))); %# Label the image. bwlabel puts 1 for the first feature, 2 for the second, etc. %# Since concave corners are placed just outside the feature, grow the features %# a little before labeling bw2 = imdilate(bw,ones(3)); labeledImage = bwlabel(bw2); %# read the feature number associated with the corner cornerLabels = labeledImage(cornerIdx); %# find all corners that are associated with feature 1 corners_1 = cornerIdx(cornerLabels==1) [Xcorners, Ycorners] = ind2sub(200,corners_1) % Convert subscripts The code I have is, to give a matrix Xfin for the final x coordinates (which are on the edge AND at a corner. Xfin = zeros(length(X),1) for i = Xcorners XFin(i) = Xcorners if i~= Xcorners XFin(i) = [] end end However, this does not work correctly, because the values in the solution are sorted into order, and only one of each value remains. As I said, I would like the corner elements to be in the same order as obtained from bwboundaries, to allow the image to trace properly. Thanks

  Read the article

< Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >