Search Results

Search found 3722 results on 149 pages for 'choice'.

Page 131/149 | < Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >

• MSCC: Career & IT Fair 2014

  Already a couple of weeks ago, I've been addressed by Ibraahim and Yunus to see whether it would be interesting to participate in the 1st Career & IT Fair organised by the UoM Computer Club. Well, luckily we met at the Global Windows Azure Bootcamp and I wasn't too sure whether it would be possible for me to attend after all. The main reason is given because of work demand and furthermore due to the fact that the Mauritius Software Craftsmanship Community currently has no advertising material at all. Here's the brief statement of the event: "The UOM Students' Computer Club in collaboration with the UOM Students' Union and UOM CSE Department is organising a 'Career & IT Fair' on the 23rd and 24th April 2014. This event has for objective to provide a platform to tertiary students, secondary students as well as vocational students, the opportunity to meet job recruiters." Luckily, I was reminded that the 23rd is a Wednesday, and therefore I decided that it might be interesting to move our weekly Code & Coffee session to the university and hence be able to attend the career fair. As it turned out it was a great choice and thankfully Pritvi, Nadim as well as Ishwon volunteered to be around at the "community booth". Thankfully, the computer club gave us - the MSCC and the LUGM - one of their spaces in the lobby area of the Paul Octave Wiéhé Auditorium. My impression about the event Very well and professionally organised. Seriously, the lads over at the UoM Computer Club did a great job in organising their 2 days event, and felt very comfortable at any time. Actually, it was kind of amusing to some of the members constantly running around and checking everything. Even though that the whole process went smooth and easy off the hand. There were a couple of interesting pieces of information and announcements during the opening ceremony. For example, the Computer Science faculty is a very young one and has been initiated back in 1988 only - just by 4 staff members at that time. Now, after 25 years they have achieved quite a lot and there are currently 1.000+ active students attending the numerous lectures and courses. But there is no room to rest on previous achievements, and I was kind of surprised to hear that there are plans to extend the campus, and offer new lectures in the fields of nanotechnology, big data handling, and - crossing fingers - the introduction and establishment of a space control centre. Mauritius is already part of the Square Kilometre Array (SKA) and hopefully there will be more activities into that direction in the near future. Community - Awareness and collaboration As stated earlier, I could only spent one morning but luckily other members of the MSCC and the LUGM stayed during the whole two days and provided answers to any interested person. As for me, I took the opportunity to get in touch with the other companies in the lobby. Mainly, to create some awareness about our IT communities but also to see whether there might be options for future engagement in common activities, too. So far, I was able to speak to representatives of the following companies: ACCA Mauritius Business at Work Infomil LinkByNet Microsoft Indian Ocean Islands & French Pacific Spherinity Training Institute Spoon Consulting Ltd. State Informatics Ltd. Unfortunately, I only had a quick chat with an HR representative of LinkByNet but I fully count on our MSCC members like Nitin or LUGM member Ronny to spread our intentions over there.  So far, all of the representatives were really interested in our concepts and activities and I'm currently catching up with an introduction flyer for the MSCC that I'm going to send out to all those contacts via mail. It would be great to have more craftsmen as well as professional support on board. Some pictures from the event MSCC: Fantastic outlook for the near future. Announcements were made on Big data, nanotechnology, and space control centre in Mauritius. Interesting! MSCC: The lobby area was cramped with students. Great way to exchange and network. Good luck to all candidates! Passing the relay staff to... I recommend you to continue to read about the first Career & IT Fair on Ish's blog. He has a great summary and more details on those two days of IT activities than I have. Thanks and feel free to leave a comment (or two)... 

  Read the article

• Configure IPv6 on your Linux system (Ubuntu)

  After the presentation on IPv6 at the first event of the Emtel Knowledge Series and some recent discussion on social media networks with other geeks and Linux interested IT people here in Mauritius, I thought that I should give it a try (finally) and tweak my local network infrastructure. Honestly, I have been to busy with contractual project work and it never really occurred to me to set up IPv6 in my LAN. Well, the following paragraphs are going to shed some light on those aspects of modern computer and network technology. This is the first article in a series on IPv6 configuration: Configure IPv6 on your Linux system DHCPv6: Provide IPv6 information in your local network Enabling DNS for IPv6 infrastructure Accessing your web server via IPv6 Piece of advice: This is based on my findings on the internet while reading other people's helpful articles and going through a couple of man-pages on my local system. Let's embrace IPv6 The basic configuration on Linux is actually very simple as the kernel, operating system, and user-space programs support that protocol natively. If your system is ready to go for IP (aka: IPv4), then you are good to go for anything else. At least, I didn't have to install any additional packages on my system(s). We are going to assign a static IPv6 address to the system. Hence, we have to modify the definition of interfaces and check whether we have an inet6 entry specified. Open your favourite text editor and check the following entries (it should be at least similar to this): $ sudo nano /etc/network/interfaces auto eth0# IPv4 configurationiface eth0 inet static  address 192.168.1.2  network 192.168.1.0  netmask 255.255.255.0  broadcast 192.168.1.255# IPv6 configurationiface eth0 inet6 static  pre-up modprobe ipv6  address 2001:db8:bad:a55::2  netmask 64 Of course, you might have to adjust your interface device (eth0) or you might be interested to have multiple directives for additional devices (eth1, eth2, etc.). The auto instruction takes care that your device is enabled and configured during the booting phase. The use of the pre-up directive depends on your kernel configuration but in most scenarios this might be an optional line. Anyways, it doesn't hurt to have it enabled after all - just to be on the safe side. Next, either restart your network subsystem like so: $ sudo service networking restart Or you might prefer to do it manually with identical parameters, like so: $ sudo ifconfig eth0 inet6 add 2001:db8:bad:a55::2/64 In case that you're logged in remotely into your PC (ie. via ssh), it is highly advised to opt for the second choice and add the device manually. You can check your configuration afterwards with one of the following commands (depends on whether it is installed): $ sudo ifconfig eth0eth0      Link encap:Ethernet  HWaddr 00:21:5a:50:d7:94            inet addr:192.168.160.2  Bcast:192.168.160.255  Mask:255.255.255.0          inet6 addr: fe80::221:5aff:fe50:d794/64 Scope:Link          inet6 addr: 2001:db8:bad:a55::2/64 Scope:Global          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1 $ sudo ip -6 address show eth03: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000    inet6 2001:db8:bad:a55::2/64 scope global        valid_lft forever preferred_lft forever    inet6 fe80::221:5aff:fe50:d794/64 scope link        valid_lft forever preferred_lft forever In both cases, it confirms that our network device has been assigned a valid IPv6 address. That's it in general for your setup on one system. But of course, you might be interested to enable more services for IPv6, especially if you're already running a couple of them in your IP network. More details are available on the official Ubuntu Wiki. Continue to configure your network to provide IPv6 address information automatically in your local infrastructure.

  Read the article

• Windows Azure Recipe: Software as a Service (SaaS)

  - by Clint Edmonson

  The cloud was tailor built for aspiring companies to create innovative internet based applications and solutions. Whether you’re a garage startup with very little capital or a Fortune 1000 company, the ability to quickly setup, deliver, and iterate on new products is key to capturing market and mind share. And if you can capture that share and go viral, having resiliency and infinite scale at your finger tips is great peace of mind. Drivers Cost avoidance Time to market Scalability Solution Here’s a sketch of how a basic Software as a Service solution might be built out: Ingredients Web Role – this hosts the core web application. Each web role will host an instance of the software and as the user base grows, additional roles can be spun up to meet demand. Access Control – this service is essential to managing user identity. It’s backed by a full blown implementation of Active Directory and allows the definition and management of users, groups, and roles. A pre-built ASP.NET membership provider is included in the training kit to leverage this capability but it’s also flexible enough to be combined with external Identity providers including Windows LiveID, Google, Yahoo!, and Facebook. The provider model provides extensibility to hook into other industry specific identity providers as well. Databases – nearly every modern SaaS application is backed by a relational database for its core operational data. If the solution is sold to organizations, there’s a good chance multi-tenancy will be needed. An emerging best practice for SaaS applications is to stand up separate SQL Azure database instances for each tenant’s proprietary data to ensure isolation from other tenants. Worker Role – this is the best place to handle autonomous background processing such as data aggregation, billing through external services, and other specialized tasks that can be performed asynchronously. Placing these tasks in a worker role frees the web roles to focus completely on user interaction and data input and provides finer grained control over the system’s scalability and throughput. Caching (optional) – as a web site traffic grows caching can be leveraged to keep frequently used read-only, user specific, and application resource data in a high-speed distributed in-memory for faster response times and ultimately higher scalability without spinning up more web and worker roles. It includes a token based security model that works alongside the Access Control service. Blobs (optional) – depending on the nature of the software, users may be creating or uploading large volumes of heterogeneous data such as documents or rich media. Blob storage provides a scalable, resilient way to store terabytes of user data. The storage facilities can also integrate with the Access Control service to ensure users’ data is delivered securely. Training & Examples These links point to online Windows Azure training labs and examples where you can learn more about the individual ingredients described above. (Note: The entire Windows Azure Training Kit can also be downloaded for offline use.) Windows Azure (16 labs) Windows Azure is an internet-scale cloud computing and services platform hosted in Microsoft data centers, which provides an operating system and a set of developer services which can be used individually or together. It gives developers the choice to build web applications; applications running on connected devices, PCs, or servers; or hybrid solutions offering the best of both worlds. New or enhanced applications can be built using existing skills with the Visual Studio development environment and the .NET Framework. With its standards-based and interoperable approach, the services platform supports multiple internet protocols, including HTTP, REST, SOAP, and plain XML SQL Azure (7 labs) Microsoft SQL Azure delivers on the Microsoft Data Platform vision of extending the SQL Server capabilities to the cloud as web-based services, enabling you to store structured, semi-structured, and unstructured data. Windows Azure Services (9 labs) As applications collaborate across organizational boundaries, ensuring secure transactions across disparate security domains is crucial but difficult to implement. Windows Azure Services provides hosted authentication and access control using powerful, secure, standards-based infrastructure. Developing Applications for the Cloud, 2nd Edition (eBook) This book demonstrates how you can create from scratch a multi-tenant, Software as a Service (SaaS) application to run in the cloud using the latest versions of the Windows Azure Platform and tools. The book is intended for any architect, developer, or information technology (IT) professional who designs, builds, or operates applications and services that run on or interact with the cloud. Fabrikam Shipping (SaaS reference application) This is a full end to end sample scenario which demonstrates how to use the Windows Azure platform for exposing an application as a service. We developed this demo just as you would: we had an existing on-premises sample, Fabrikam Shipping, and we wanted to see what it would take to transform it in a full subscription based solution. The demo you find here is the result of that investigation See my Windows Azure Resource Guide for more guidance on how to get started, including more links web portals, training kits, samples, and blogs related to Windows Azure.

  Read the article

• Top ten things that don't make sense in The Walking Dead

  - by iamjames

  For those of you that don't know, The Walking Dead is a popular American TV show on AMC about a group of people trying to survive in a zombie-filled world.Here's the top ten eleven things that don't make sense on the show (and have never been explained) 1)  They never visit stores.  No Walmarts, Kmarts, Targets, shopping malls, pawn shops, gas stations, etc.  You'd think that would be the first place you'd visit for supplies, but they never have.  Not once.  There was a tiny corner store they visited in a small town, and while many products were already gone they did find several useful items.  2)  They never raid houses.  Why not?  One would imagine that they would want to search houses for useful items, but they don't.3)  They don't use 2 way radios.  Modern 2-way radios have a 36-mile range.  That's probably best possible range, but even if the range is only 10% of that, 3.6 miles, that's still more than enough for most situations, for the occasional "hey zombies attacking can you give me a hand?" or "there's zombies walking by stay inside until they leave" or "remember to pick up milk at the store love mom".  And yes they would need batteries or recharging, but they have been using gas-powered generators on the show and I'm sure a car charger would work.4)  They use gas-guzzling vehicles.  Every vehicle they have is from the 80s or 90s except for the new Kia SUV there for product placement.  Why?  They should all be driving new small SUVs or hybrids.  Visit a dealership and steal more fuel-efficient vehicles, because while the Walmart's might be empty from people raiding them for supplies, I'm sure most people weren't thinking "Gee, I should go car shopping" when the infection hit5)  They drive a motorcycle.  Seriously?  Let's find the least protective vehicle and drive that.  And while motorcycles get reasonable gas mileage, 5 people in a SUV gets better gas mileage per person than 5 people all driving motorcycles so it doesn't make economical sense either.6)  They drive loud vehicles.  The motorcycle used is commonly referred to as a chopper and is about as loud as a motorcycle can get.  The zombies are attracted to loud noise, so wouldn't it make more sense to drive vehicles that makes less sound?  Because as soon as you stop the bike and get off you're surrounded by zombies that heard you coming.  And it's not just the bike, the ~1980s Chevy SUV in the show is also very loud.7)  They never run out of food.  Seems like that would be a almost daily struggle, keeping enough food available for about a dozen people, yet I've never seen them visit a grocery store or local convenience store to stock up.8)  They don't carry swords, machetes, clubs, etc.  Let's face it, biting is not a very effective means of attack.  It's good for animals because they have fangs and little else, but humans have been finding better ways of killing each other since forever.  So why doesn't everyone on the show carry a sword or machete or at least a baseball bat?  Anything is better than wasting valuable bullets all the time.  Sure, dozen zombies approaching?  Shoot them.  One zombie approaching?  Save the bullet, cut off it's head.  9)  They do not wear protective clothing.  Human teeth are not exactly the sharpest teeth in the animal kingdom.  The leather shoes your dog ripped to shreds within minutes would probably take you days to bite through.  So why do they walk around half-naked?  Yes I know it's hot in Atlanta, but you'd think they'd at least have some tough leather coats or something for protection.  Maybe put a few small vent holes in the fabric if it's really hot.  Or better:  make your own chainmail.  Chainmail was used for thousands of years for protection from swords and is still used by scuba divers for protection from sharks.  If swords and sharks can't puncture it, human teeth don't stand a chance.  10)  They don't build barricades or dig trenches around properties.  In Season 2 they stayed at a farm in the middle of no where.  While being far away from people is a great way to stay far away from zombies, it would still make sense to build some sort of defenses.  Hordes of zombies would knock down almost any fence, but what about a trench or moat?  Maybe something not too wide so it can be jumped over easily but a zombie would fall into because I haven't seen too many jumping zombies on the show.  11)  They don't live in a mall or tall office building.  A mall would be perfect.  They have large security gates designed to keep even hundreds of people from breaking in and offer lots of supplies and food.  They're usually hundreds of thousands of square feet and fully enclosed, one could probably live their entire life happily in a mall.  Tall office building with on-site cafeteria would be another good choice.  They also usually offer good security and office furniture could be pushed out of the windows to crush approaching zombies, and the cafeteria is usually stocked to provide food for hundreds or thousands of office workers so food wouldn't be a problem for a long time. So there you have it, eleven things that don't make sense in The Walking Dead.  Have any of your own you'd like to add or were one of these things covered in the show?  Let me know in the comments.

  Read the article

• Customizing UPK outputs (Part 2 - Player)

  - by [email protected]

  There are a few things that can be done to give the Player output a personalized look to match your corporate branding. In my previous post, I talked about changing the logo. In addition to the logo, you can change the graphic in the heading, button colors, border colors and many other items. Prior to making any customizations, I strongly recommend making a copy of the existing Player style. This will give you a backup in case things go wrong. I'd also recommend that you create your own brand. This way, when you install the newest updates from us, your brand will remain intact. Creating your own brand is pretty easy. Make sure you have modify permissions on the publishing styles directory, if you are using a multi-user installation. Under the Publishing/Styles folder, create a new folder with your company name. Copy all the publishing styles from the UPK folder to your newly created folder. Now, when you go through the Publishing wizard, you will have two categories to choose from: the UPK category or your custom category. Now, for updating the Player output. First, the graphic that appears on the right hand side of the Player. If you're using a multi-user installation, check out the player style from your custom brand. Open the player style. Open the img folder. The file named "banner_image.png" represents the graphic that appears on the right hand side of the player. It is currently sized at 425 x 54. Try to keep your graphic about the same size. Rename your graphic file to be "banner_image.png", and drag it into the img folder. Save the package. Check in the package if you are in a multi-user installation. You've just updated the banner heading! Next, let's work on updating some of the other colors in the player. All the customizable areas are located in the skin.css file which is in the root of the Player style. Many of our customers update the colors to match their own theme. You don't have to be a programmer to make these changes, honest. :) To change the colors in the player: Make a copy of the original skin.css file. (This is to make sure you have a working version to revert to, in case something goes wrong.) Open the skin.css file from the Player package. You can edit it using Notepad. Make the desired changes. Save the file. Save the package. Publish to view your new changes. When you open the skin.css, you will see groupings like this: .headerDivbar { height: 21px; background-color: #CDE2FD; } Change the value of the background-color to the color of your choice. Note that you cannot use "red" as a color, but rather you should enter the hexadecimal color code. If you don't know the color code, search the web for "hexadecimal colors" and you'll find many sites to provide the information. Here are a few of the variables that you can update. Heading: .headerDivbar -this changes the color of the banner that appears under the graphic Button colors: .navCellOn - changes the color of the mode buttons when your mouse is hovering on them. .navCellOff - changes the color of the mode buttons when the mouse is not over them Lines: .thorizontal - this is the color of the horizontal lines surrounding the outline .tvertical - this is the color of the vertical lines on the left and right margin in the outline. .tsep - this is the color of the line that separates the outline from the content area Search frame: .tocSearchColor - this is the color of the search area .tocFrameText - this is the background color of the TOC tree. Hint: If you want to try out the changes prior to updating the style, you can update the skin.css in some content you've already published for the player (it's located in the css folder of the player package). This way, you can immediately see the changes without going through publishing. Once you're happy with the changes, update the skin.css in player style. Want to customize more? Refer to the "Customizing the Player" section of the Content Development manual for more details on all the options in the skin.css that can be changed, and pictures of what each variable controls. I'd love to see how you've customized the player for your corporate needs. Also, if there are other areas of the player you'd like to modify but have not been able to, let us know. Feel free to share your thoughts in the comments. --Maria Cozzolino, Manager of Requirements & UI Design for UPK

  Read the article

• Death March

  - by Nick Harrison

  It is a horrible sight to watch a project fail. There are few things as bad. Watching a project fail regardless of the reason is almost like sitting in a room with a "Dementor" from Harry Potter. It will literally suck all of the life and joy out of the room. Nearly every project that I have seen fail has failed because of political challenges or management challenges. Sometimes there are technical challenges that bring a project to its knees, but usually projects fail for less technical reasons. Here a few observations about projects failing for political reasons. Both the client and the consultants have to be committed to seeing the project succeed. Put simply, you cannot solve a problem when the primary stake holders do not truly want it solved. This could come from a consultant being more interested in extended the engagement. It could come from a client being afraid of what will happen to them once the problem is solved. It could come from disenfranchised stake holders. Sometimes a project is beset on all sides. When you find yourself working on a project that has this kind of threat, do all that you can to constrain the disruptive influences of the bad apples. If their influence cannot be constrained, you truly have no choice but to move on to a new project. Tough choices have to be made to make a project successful. These choices will affect everyone involved in the project. These choices may involve users not getting a change request through that they want. Developers may not get to use the tools that they want. Everyone may have to put in more hours that they originally planned. Steps may be skipped. Compromises will be made, but if everyone stays committed to the end goal, you can still be successful. If individuals start feeling disgruntled or resentful of the compromises reached, the project can easily be derailed. When everyone is not working towards a common goal, it is like driving with one foot on the break and one foot on the accelerator. Not only will you not get to where you are planning, you will also damage the car and possibly the passengers as well.   It is important to always keep the end result in mind. Regardless of the development methodology being followed, the end goal is not comprehensive documentation. In all cases, it is working software. Comprehensive documentation is nice but useless if the software doesn't work.   You can never get so distracted by the next goal that you fail to meet the current goal. Most projects are ultimately marathons. This means that the pace must be sustainable. Regardless of the temptations, you cannot burn the team alive. Processes will fail. Technology will get outdated. Requirements will change, but your people will adapt and learn and grow. If everyone on the team from the most senior analyst to the most junior recruit trusts and respects each other, there is no challenge that they cannot overcome. When everyone involved faces challenges with the attitude "This is my project and I will not let it fail" "You are my teammate and I will not let you fail", you will in fact not fail. When you find a team that embraces this attitude, protect it at all cost. Edward Yourdon wrote a book called Death March. In it, he included a graph for categorizing Death March project types based on the Happiness of the Team and the Chances of Success.   Chances are we have all worked on Death March projects. We will all most likely work on more Death March projects in the future. To a certain extent, they seem to be inevitable, but they should never be suicide or ugly. Ideally, they can all be "Mission Impossible" where everyone works hard, has fun, and knows that there is good chance that they will succeed. If you are ever lucky enough to work on such a project, you will know that sense of pride that comes from the eventual success. You will recognize a profound bond with the team that you worked with. Chances are it will change your life or at least your outlook on life. If you have not already read this book, get a copy and study it closely. It will help you survive and make the most out of your next Death March project.

  Read the article

• How to Save Hundreds or Thousands of Dollars on Cell Phone Service

  - by Chris Hoffman

  Cell phone contracts are bad. You get a seemingly cheap phone up front, but you more than pay for the cost of the phone over two years. Prepaid phone plans are surging in North America for a reason. Prepaid phone plans will be cheaper and more flexible than traditional contracts with big carriers for many people. However much you use your phone, there’s a good chance you can save money with a prepaid service. No More Contracts Here’s how cell phone service typically works in North America: You get a subsidized phone for “free”, $99, or $199. You sign up for a two-year contract and more than pay back the cost of that phone over the length of the contract. This is similar to leasing something or purchasing it on a credit card and paying it back over two years — you spend less up front, but you’re paying more in the long run. But this isn’t the only option. You could opt for a cheaper prepaid service that doesn’t lock you into a contract. If you don’t use your phone much, you could just pay for what you use and avoid the hefty cell phone bills. If you use your phone a lot, you could get a cheaper plan, too. Now, this certainly isn’t for everyone. If you want the latest iPhone or Galaxy smartphone every two years and require a 4G data connection, prepaid services may not be for you. On the other hand, if you don’t need the latest phone, you can save money here. You can also save a huge amount of money if you don’t use your phone much. Phone Options When you choose your prepaid or contract-free service, you’ll often be able to purchase a phone from them. You’ll generally be able to find dirt-cheap dumbphones and the cheapest, slowest Android phones for not very much money. If you are able to buy a top-of-the-line smartphone, you’ll have to pay the full, unsubsidized price. That’s $649 for either an iPhone 5S or Samsung Galaxy S4. Whatever phones the service provider offers, you could always buy a phone elsewhere — for example, you could buy an unsubsidized iPhone direct from Apple and then take it to your cell phone service of choice. Most services will allow you to get a SIM card and pop it into your existing phone rather than purchasing a phone. If you can get a hand-me-down smartphone, you can often save quite a bit of money. For example, you may have a family member upgrading from an iPhone 4S to an iPhone 5S. You could take their phone to a prepaid carrier and have a nicer phone on a cheap cell phone plan. If you brought an old smartphone to a big carrier like AT&T or Verizon, they wouldn’t give you a discount on your monthly plan. You’d have to pay the same amount of money every month as if you had gotten a subsidized phone. Google’s Nexus phones are also great options for people looking to buy smartphones and pay up-front. Google’s Nexus 4 offered a modern, almost top-of-the-line Android smartphone experience at $299 or $349 when it came out last year. Google will soon be releasing the Nexus 5 and it’s expected to be priced at $349. That’s certainly a lot more than a cheap phone, but it’s a fairly high-end smartphone at almost half the price of an iPhone 5S or Galaxy S4. Nexus phones can be purchased online from Google’s Play Store. Service Options When choosing a service, you need to consider what you actually use. If you’re someone who only uses your phone rarely, you can get plans that will allow you to pay as little as a few dollars per month. If you’re someone who’s usually in range of Wi-Fi, you may not need much data at all. If you want a plan with unlimited talk, texting, and data usage, you can get it for much cheaper than you’d pay on a major carrier like AT&T. The options here range from pay-as-you-go plans, like the ones offered by T-Mobile, which allow you to put a certain amount of money in and only drain that balance when you actually use minutes, texts, or data. If you only make a few calls and send a few texts per month, you’d only pay a few bucks. On the other end, Walmart’s Straight Talk service is a popular option that offers unlimited talk, texting, and data at $45 per month. Which service is right for you depends on a lot of things, including your usage and what each network’s coverage is like in your area. You’ll want to do some research of your own before choosing a service. Prepaid services also offer you even more flexibility after you choose one. If you’re not happy or a better deal comes along, you can switch — you’re not locked into your service for two years and you won’t pay an early termination fee. Image Credit: Intel Free Press on Flickr, Jon Fingas on Flickr, John Karakatsanis on Flickr, kendalkinggroup on Flickr     

  Read the article

• obiee 10g teradata Solaris deployment

  - by user554629

  I have 3-4 years worth of notes on proper Teradata deployment across multiple operating systems.   The topic that is too large to cover succinctly in a blog entry.   I'm trying something new:  document a specific situation, consolidate the facts, document diagnostic procedures and then clone the structure to cover other obiee deployments (11g and other operating systems). Until the icon below is removed, this blog entry may be revised frequently.  No construction between June 6th through June 25th. Getting started obiee 10g certification:  pg 24-25 Teradata V2R5.1.x - V2R6.2, Client 13.10, certified 10.1.3.4.1obiee 10g documentation: Deployment Guide, Server Administration, Install/Config Guideobiee overview: teradata connectivity downloads: ( requires registration )solaris odbc drivers: sparc 13.10:  Choose 13.10.00.04  ( ReadMe ) sparc 14.00: probably would work, but not certified by Oracle on 10g I assume you have obiee 10.1.3.4.1 installed; 10.1.3.4.2 would be a better choice. Teradata odbc install requires root for Solaris pkgadd Only 1 version of Teradata odbc can be installed.symbolic links to the current version are created in /usr/lib at install obiee implementation background database access has two types of implementation:  native and odbcnative drivers use DB vendor client interfaces for accessodbc drivers are provided by the DB vendor for DB accessTeradata is an odbc interface Database. odbc drivers require an ODBC Driver Managerobiee uses Merant Data Direct driver manager obiee servers communicate with one another using odbc.The internal odbc driver is implemented by the obiee team and requires Merant Driver Manager. Teradata supplies a Driver Manager, which is built by Merant, but should not be used in obiee. The nqsserver shared library deployment looks like this  OBIEE Server<->DataDirect Manager<->Teradata Driver<->Teradata Database nqsserver startup $ cd $BI/setup$ . ./sa-init64.sh$ run-sa.sh autorestart64 The following files are referenced from setup:  .variant.sh  user.sh  NQSConfig.INI  DBFeatures.INI  $ODBCINI ( odbc.ini )  sqlnet.ora How does nqsserver connect to Teradata? A teradata DSN is created in the RPD. ( TD71 )setup/odbc.ini contains: [ODBC Data Sources] TD71=tdata.so[TD71]Driver=/opt/tdodbc/odbc/drivers/tdata.soDescription=Teradata V7.1.0DBCName=###.##.##.### LastUser=Username=northwindPassword=northwindDatabase=DefaultDatabase=northwind setup/user.sh contains LIBPATH\=/opt/tdicu/lib_64\:/usr/odbc/lib\:/usr/odbc/drivers\:/usr/lpp/tdodbc/odbc/drivers\:$LIBPATHexport LIBPATH   setup/.variant.sh contains if [ "$ANA_SERVER_64" = "1" ]; then  ANA_BIN_DIR=${SAROOTDIR}/server/Bin64  ANA_WEB_DIR=${SAROOTDIR}/web/bin64  ANA_ODBC_DIR=${SAROOTDIR}/odbc/lib64         setup/sa-run.sh  contains . ${ANA_INSTALL_DIR}/setup/.variant.sh. ${ANA_INSTALL_DIR}/setup/user.sh logfile="${SAROOTDIR}/server/Log/nqsserver.out.log"${ANA_BIN_DIR}/nqsserver -quiet >> ${logfile} 2>&1 &   nqsserver is running: nqsserver produces $BI/server/nqsserver.logAt startup, the native database drivers connect and record DB versions.tdata.so is not loaded until a Teradata DB connection is attempted.    Teradata odbc client installation Accept all the defaults for pkgadd.   Install in /opt. $ mkdir odbc$ cd odbc$ gzip -dc ../tdodbc__solaris_sparc.13.10.00.04.tar.gz | tar -xf - $ sudo su# pkgadd -d . TeraGSS# pkgadd -d . tdicu1310# pkgadd -d . tdodbc1310   Directory Notes: /opt/teradata/client/13.10/odbc_64/lib/tdata.soThe 64-bit obiee library loaded by nqsserver. /opt/teradata/client/13.10/odbc_64/lib is not needed in LD_LIBRARY_PATH /opt/teradata/client/13.10/tdicu/lib64is needed in LD_LIBRARY_PATH /usr/odbc should not be referenced;  it is a link to 32-bit libraries LD_LIBRARY_PATH_64 should not be used.     Useful bash functions and aliases export SAROOTDIR=/export/home/dw_adm/OracleBIexport TERA_HOME=/opt/teradata/client/13.10 export ORACLE_HOME=/export/home/oracle/product/10.2.0/clientexport ODBCINI=$SAROOTDIR/setup/odbc.iniexport TD_ICU_DATA=$TERA_HOME/tdicu/lib64alias cds="alias | grep '^alias cd' | sed 's/^alias //' | sort"alias cdtd="cd $TERA_HOME; ls" alias cdtdodbc="cd $TERA_HOME/odbc_64; ls -l"alias cdtdicu="cd $TERA_HOME/tdicu/lib64; ls -l"alias cdbi="cd $SAROOTDIR; ls"alias cdbiodbc="cd $SAROOTDIR/odbc; ls -l"alias cdsetup="cd $SAROOTDIR/setup; ls -ltr"alias cdsvr="cd $SAROOTDIR/server; ls"alias cdrep="cd $SAROOTDIR/server/Repository; ls -ltr"alias cdsvrcfg="cd $SAROOTDIR/server/Config; ls -ltr"alias cdsvrlog="cd $SAROOTDIR/server/Log; ls -ltr"alias cdweb="cd $SAROOTDIR/web; ls"alias cdwebconfig="cd $SAROOTDIR/web/config; ls -ltr"alias cdoci="cd $ORACLE_HOME; ls"pkgfiles() { pkgchk -l $1 | awk  '/^Pathname/ {print $2}'; }pkgfind()  { pkginfo | egrep -i $1 ; } Examples: $ pkgfind td$ pkgfiles tdodbc1310 | grep 64$ cds$ cdtdodbc$ cdsetup$ cdsvrlog$ cdweblog

  Read the article

• Community Branching

  - by Dane Morgridge

  As some may have noticed, I have taken a liking to Ruby (and Rails in particular) quite a bit recently. This last weekend I spoke at the NYC Code Camp on a comparison of ASP.NET and Rails as well as an intro to Entity Framework talk.  I am speaking at RubyNation in April and have submitted to other ruby conferences around the area and I am also doing a Rails and MongoDB talk at the Philly Code Camp in April. Before you start to think this is my "I'm leaving .NET post", which it isn't so I need to clarify. I am not, nor do I intend to any time in the near future plan on abandoning .NET.  I am simply branching out into another community based on a development technology that I very much enjoy.  If you look at my twitter bio, you will see that I am into Entity Framework, Ruby on Rails, C++ and ASP.NET MVC, and not necessarily in that order.  I know you're probably thinking to your self that I am crazy, which is probably true on several levels (especially the C++ part). I was actually crazy enough at the NYC Code Camp to show up wearing a Linux t-shirt, presenting with my MacBook Pro on Entity Framework, ASP.NET MVC and Rails. (I did get pelted in the head with candy by Rachel Appel for it though) At all of the code camps I am submitting to this year, i will be submitting sessions on likely all four topics, and some sessions will be a combination of 2 or more.  For example, my "ASP.NET MVC: A Gateway To Rails?" talk touches ASP.NET MVC, Entity Framework Code First and Rails. Simply put (and I talk about this in my MVC & Rails talk) is that learning and using Rails has made me a better ASP.NET MVC developer. Just one example of this is helper methods.  When I started working with ASP.NET MVC, I didn't really want to use helpers and preferred to just use standard html tags, especially where links were concerned.  It was just me being stubborn and not really seeing all of the benefit of the helpers.  To my defense, coming from WebForms, I wanted to be as bare metal as possible and it seemed at first like a lot of the helpers were an unnecessary abstraction. I took my first look at Rails back in v1 and didn't spend very much time with it so I dismissed it and went on my merry ASP.NET WebForms way.  Then I picked up ASP.NET MVC and grasped the MVC pattern itself much better. After this, I took another look at Rails and everything made sense.  I decided then to learn Rails. (I think it is important for developers to learn new languages and platforms regularly so it was a natural progression for me) I wanted to learn it the right way, so when I dug into code, everyone used helpers everywhere for pretty much everything possible. I took some time to dig in and found out how helpful they were and subsequently realized how awesome they were in ASP.NET MVC also and started using them. In short, I love Rails (and Ruby in general).  I also love ASP.NET MVC and Entity Framework and yes I still love C++.  I have varying degrees of love for them individually at any given moment and it is likely to shift based on the current project I am working on.  I know you're thinking it so before you ask the question. "Which do I use when?", I'm going to give the standard developer answer of: It depends.  There are a lot of factors that I am not going to even go into that would go into a decision.  The most basic question I would ask though is,  does this project depend on .NET?  If it does, then I'd say that ASP.NET MVC is probably going to be the more logical choice and I am going to leave it at that.  I am working on projects right now in both technologies and I don't see that changing anytime soon (one project even uses both). With all that being said, you'll find me at code camps, conferences and user groups presenting on .NET, Ruby or both, writing about .NET and Ruby and I will likely be blogging on both in the future.  I know of others that have successfully branched out to other communities and with any luck I'll be successful at it too. On a (sorta) side note, I read a post by Justin Etheredge the other day that pretty much sums up my feelings about Ruby as a language.  I highly recommend checking it out: What Is So Great About Ruby?

  Read the article

• Content Query Web Part and the Yes/No Field

  - by Bil Simser

  The Content Query Web Part (CQWP) is a pretty powerful beast. It allows you to do multiple site queries and aggregate the results. This is great for rolling up content and doing some summary type reporting. Here’s a trick to remember about Yes/No fields and using the CQWP. If you’re building a news style site and want to aggregate say all the announcements that people tag a certain way, up onto the home page this might be a solution. First we need to allow a way for users of all our sites to mark an announcement for inclusion on our Intranet Home Page. We’ll do this by just modifying the Announcement Content type and adding a Yes/No field to it. There are alternate ways of doing this like building a new Announcement type or stapling a feature to all sites to add our column but this is pretty low impact and only affects our current site collection so let’s go with it for now, okay? You can berate me in the comments about the proper way I should have done this part. Go to the Site Settings for the Site Collection and click on Site Content Types under the Galleries. This takes you to the gallery for this site and all subsites. Scroll down until you see the List Content Types and click on Announcements. Now we’re modifying the Announcement content type which affects all those announcement lists that are created by default if you’re building sites using the Team Site template (or creating a new Announcements list on any site for that matter). Click on Add from new site column under the Column list. This will allow us to create a new Yes/No field that users will see in Announcement items. This field will allow the user to flag the announcement for inclusion on the home page. Feel free to modify the fields as you see fit for your environment, this is just an example. Now that we’ve added the column to our Announcements Content type we can go into any site that has an announcement list, modify that announcement and flag it to be included on our home page. See the new Featured column? That was the result of modifying our Announcements Content Type on this site collection. Now we can move onto the dirty part, displaying it in a CQWP on the home page. And here is where the fun begins (and the head scratching should end). On our home page we want to drop a Content Query Web Part and aggregate any Announcement that’s been flagged as Featured by the users (we could also add the filter to handle Expires so we don’t show old content so go ahead and do that if you want). First add a CQWP to the page then modify the settings for the web part. In the first section, Query, we want the List Type to be set to Announcements and the Content type to be Announcement so set your options like this: Click Apply and you’ll see the results display all Announcements from any site in the site collection. I have five team sites created each with a unique announcement added to them. Now comes the filtering. We don’t want to include every announcement, only ones users flag using that Featured column we added. At first blush you might scroll down to the Additional Filters part of the Query options and set the Featured column to be equal to Yes: This seems correct doesn’t it? After all, the column is a Yes/No column and looking at an announcement in the site, it displays the field as Yes or No: However after applying the filter you get this result: (I have the announcements from Team Site 1 and Team Site 4 flagged as Featured) Huh? It’s BACKWARDS! Let’s confirm that. Go back in and change the Additional Filters section from Yes to No and hit Apply and you get this: Wait a minute? Shouldn’t I see Team Site 1 and 4 if the logic is backwards? Why am I seeing the same thing as before. What gives… For whatever reason, unknown to me, a Yes/No field (even though it displays as such) really uses 1 and 0 behind the scenes. Yeah, someone was stuck on using integer values for booleans when they wrote SharePoint (probably after a long night of white boarding ways to mess with developers heads) and came up with this. The solution is pretty simple but not very discoverable. Set the filter to include your flagged items like so: And it will filter the items marked as Featured correctly giving you this result: This kind of solution could also be extended and enhanced. Here are a few suggestions and ideas: Modify the ItemStyle.xsl file to add a new style for this aggregation which would include the first few paragraphs of the body (or perhaps add another field to the Content type called Excerpt or Summary and display that instead) Add an Image column to the Announcement Content type to include a Picture field and display it in the summary Add a Category choice field (Employee News, Current Events, Headlines, etc.) and add multiple CQWPs to the home page filtering each one on a different category I know some may find this topic old and dusty but I didn’t see a lot out there specifically on filtering the Yes/No fields and the whole 1/0 trick was a little wonky, so I figured a few pictures would help walk through overcoming yet another SharePoint weirdness. With a little work and some creative juices you can easily us the power of aggregation and the CQWP to build a news site from content on your team sites.

  Read the article

• SQLAuthority News – A Conversation with an Old Friend – Sri Sridharan

  - by pinaldave

  Sri Sridharan is my old friend and we often talk on GTalk. The subject varies from Life in India/USA, movies, musics, and of course SQL. We have our differences when we talk about food or movie but we always agree when we talk about SQL. Yesterday while chatting with him we talked about SQLPASS and the conversation lasted for a long time. Here is the conversation between us on GTalk. I have removed a few of the personal talks and formatted into paragraphs as GTalk often shows stuff out of formatting. Pinal: Sri, Congrats on running for the PASS BoD again. You were so close last year. What made you decide to run again this year? Sri: Thank you Pinal for your leadership in the PASS India Community and all the things you do out there. After coming so close last year, there was no doubt in my mind that I will run again. I was truly humbled by the support I got from the community. Growing up in India for over 25 years, you are brought up in a very competitive part of the world. Right from the pressure of staying in the top of the class from kindergarten to your graduation, the relentless push from your parents about studying and getting good grades (and nothing else matters), you land up essentially living in a pressure cooker. To survive that relentless pressure, you need to have a thick skin, ability to stand up for who you really are , what you want to accomplish and in the process stay true those values. I am striving for a greater cause, to make PASS an organization that can help people with their SQL Server careers, to make PASS relevant to its chapter members, to make PASS an organization that every SQL professional in the world wants to be connected with. Just because I did not get elected or appointed last year does not mean that these causes are not worth fighting. Giving up upon failing the first time is simply not in me. If I did that, what message would I send to those who voted for me? What message would I send to my kids? Pinal: As someone who has such strong roots in India, what can the Indian PASS Community expect from you? Sri: First of all, I think fostering a regional leadership is something PASS must encourage as part of its global growth plan. For PASS global being able to understand all the issues in a region of the world and make sound decisions will be a tough thing to do on a continuous basis. I expect people like you, chapter leaders, regional mentors, MVPs of the region start playing a bigger role in shaping the next generation of PASS. That is something I said in my campaign and I still stand by it. I would like to see growth in the number of chapters in India. The current count does not truly represent the full potential of that region. I was pretty thrilled to see the Bangalore SQLSaturday happen early this year. I would like to see more of SQLSaturday events, at least in the major metro cities. I know the issues in India are very different from the rest of the world. So the formula needs to be tweaked a little for it to work better in India. Once the SQLSaturday model is vetted out, maybe there could be enough justification to have SQLRally India. PASS needs to have a premier SQL event in that region. Going to USA or Europe for that matter is incredibly hard due to VISA issues etc. So this could be a case of where PASS comes closer to where the community is. Pinal: What portfolio would take on if you are elected to the PASS Board? Sri: There are some very strong folks on the PASS Board today. The President discusses the portfolios with the group and makes the final call on the portfolios. I am also a fan of having a team associated with the portfolios. In that case, one person is the primary for a portfolio but secondary on a couple of other portfolios. This way people on the board have a direct vested interest in a few portfolios. Personally, I know I would these portfolios good justice – Chapters, Global Growth and Events (SQLSat, SQLRally). I would try to see if we can get a director to focus on Volunteers.  To me that is very critical for growth in the international regions. Pinal: This is an interesting conversation with you Sri. I know you so long time but this is indeed inspiring to many. India is a big country and we appreciate your thoughts. Sri: Thank you very much for taking time to chat with me today. Cheers. There are pretty strong candidates for SQLPASS Board of Elections this year. I know all of them in person and honestly it is going to be extremely difficult to not to vote for anybody. I am indeed in a crunch right now how to pick one over another. Though the choice is difficult, I encourage you to vote for them. I am extremely confident that the new board of directors will all have the same goal – Better SQL Server Community. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Database, DBA, PostADay, SQL, SQL Authority, SQL PASS, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

  Read the article

• Silverlight Cream Monday WP7 App Review # 1

  - by Dave Campbell

  I'm going to try something here... if it seems useful, I'll continue, if it doesn't, I'll stop... so give me feedback! There are *lots* of Apps in the WP7 Marketplace, and heaven help me, but the Marketplace sucks for finding stuff. I won't rehash what's already been said in the blogs, but I agree with one and all. I went out last Saturday to find 2 apps that I knew were released, and couldn't do so on my device. Even in the Zune app, it took quite a while to find them... ok, I'll back off a bit, because I just found out I can do 'Search' now if I know the name... I didn't think that was working before. So my thought is on Monday (like today), I will post a review of 5 apps/games I either use or have played with on my device. These are strictly my opinions, you understand, but hey... it's better than a poke in the eye with an iPhone! A few disclaimers:     Feel free to write me about your app and tell me about it. While it would be very cool to receive a whole bunch of xap files to review, at this point, for technical reasons, I'm unable to side-load my device. Since I plan on only doing this one day a week, and only 5, I may never get caught up, so if you send me some info, be patient. Re: games ... remember I'm old... I'm from the era of Colossal Cave and Zork. Duke-Nukem 2D and Captain Comic were awesome. I don't own an XBOX or any other game system, so take game reviews from my perspective -- who knows, it may be refreshing :) I won't pay for an app or game just to try it. If you expect me to test-drive your app, it's going to have to have a Free Trial. In this Issue:   Jingo! is the first app I bought, just to see what the experience was like. It's very much like a game we used to play in school in the Army in 1971 on paper we passed around. Sort of a cross between hangman and Mastermind, you try to figure out the hidden word in 5 tries. You get really good at 5-letter words after a while. I like this because you have to think, and you're not pressured by a clock Jingo! is by James Furdell and is $1.99 I reviewed René Schulte's Pictures Lab a while back, and have not changed my mind. This is an excellent app for playing with any photo on your device... one you've just taken, one you've synced from your PC, or one you've saved from email. I like this because you can get some cool effects for your photos, and it just works. Pictures Lab is by Schulte Software Development and is $1.99 Since I work as a consultant, and from home, I wanted something I could track my time with. I've test-driven all the contenders I could find so far on the phone, and so far I like ONTRACK! the best. If asked, I have some suggestions, but it's probably just the way I work or think. What I do like is I can tap a project to start/stop/restart a counter, and at the end of the day it shows me how much time I've been working. If there's a way to make an adjustment in case you forget to tap the counter, I don't know how to do it, and that's my biggest complaint. I like this because you can get a daily readout which you can also email as a spreadsheet. The daily results display is very good. ONTRACK! is by Qmino and is $2.99 Remember Item 4 above... I've been playing guitar for 48 years... obviously since before the invention of 'tuners', so I'm not as dependent upon these as some folks are. I've tried some in the past and have always felt I can do just as good by ear (I have perfect relative pitch). So, I gave this app by András Velvárt a dance just to see how it works, and it is surprisingly good. If you're used to one of the stage tuners this may take a little getting used to, but it does the job. The difference with this one is there is no real 'null' point inside which you can think your guitar is in tune. The soundwave stays visible on the device, and if it's moving to the right, your string is flat, if it's moving to the left, your string is sharp. Getting it exact might be tricky, but it is exact! If you need to rely on a tuner, this is a good choice in my opinion, exactly because of the sensitivity.. tune up with this and you're dead-on. Guitar Tuner is by Kinabalu Innovation Limited and is $0.99 Popper 2 is the WP7 version of a wildly popular game by Bill Reiss named Dr. Popper. You can get a trial, or you can now get a free lite version of the game. Popper 2 is a fast-paced bubble breaker game. I find it something fun to play when I just want to buzz out, but maybe the best review is that my daughter didn't want to give my phone back when I showed it to her, and always wants to grab my phone to play 'that game'. A fun distraction with great graphics and a great price Popper 2 is by Blue Rose Systems, LLC and is $1.29 Let me know what you think of the idea of doing reviews, or the layout/whatever, and Stay in the 'Light!   Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Oracle RightNow CX for Good Customer Experiences

  - by Andreea Vaduva

  Oracle RightNow CX is all about the customer experience, it’s about understanding what drives a good interaction and it’s about delivering a solution which works for our customers and by extension, their customers. One of the early guiding principles of Oracle RightNow was an 8-point strategy to providing good customer experiences. Establish a knowledge foundation Empowering the customer Empower employees Offer multi-channel choice Listen to the customer Design seamless experiences Engage proactively Measure and improve continuously The application suite provides all of the tools necessary to deliver a rewarding, repeatable and measurable relationship between business and customer. The Knowledge Authoring tool provides gap analysis, WYSIWIG editing (and includes HTML rich content for non-developers), multi-level categorisation, permission based publishing and Web self-service publishing. Oracle RightNow Customer Portal, is a complete web application framework that enables businesses to control their own end-user page branding experience, which in turn will allow customers to self-serve. The Contact Centre Experience Designer builds a combination of workspaces, agent scripting and guided assistances into a Desktop Workflow. These present an agent with the tools they need, at the time they need them, providing even the newest and least experienced advisors with consistently accurate and efficient information, whilst guiding them through the complexities of internal business processes. Oracle RightNow provides access points for customers to feedback about specific knowledge articles or about the support site in general. The system will generate ‘incidents’ based on the scoring of the comments submitted. This makes it easy to view and respond to customer feedback. It is vital, more now than ever, not to under-estimate the power of the social web – Facebook, Twitter, YouTube – they have the ability to cause untold amounts of damage to businesses with a single post – witness musician Dave Carroll and his protest song on YouTube, posted in response to poor customer services from an American airline. The first day saw 150,000 views and is currently at 12,011,375. The Times reported that within 4 days of the post, the airline’s stock price fell by 10 percent, which represented a cost to shareholders of $180 million dollars. It is a universally acknowledged fact, that when customers are unhappy, they will not come back, and, generally speaking, it only takes one bad experience to lose a customer. The idea that customer loyalty can be regained by using social media channels was the subject of a 2011 Survey commissioned by RightNow and conducted by Harris Interactive. The survey discovered that 68% of customers who posted a negative review about a holiday on a social networking site received a response from the business. It further found that 33% subsequently posted a positive review and 34% removed the original negative review. Cloud Monitor provides the perfect mechanism for seeing what is being said about a business on public Facebook pages, Twitter or YouTube posts; it allows agents to respond proactively – either by creating an Oracle RightNow incident or by using the same channel as the original post. This leaves step 8 – Measuring and Improving: How does a business know whether it’s doing the right thing? How does it know if its customers are happy? How does it know if its staff are being productive? How does it know if its staff are being effective? Cue Oracle RightNow Analytics – fully integrated across the entire platform – Service, Marketing and Sales – there are in excess of 800 standard reports. If this were not enough, a large proportion of the database has been made available via the administration console, allowing users without any prior database experience to write their own reports, format them and schedule them for e-mail delivery to a distribution list. It handles the complexities of table joins, and allows for the manipulation of data with ease. Oracle RightNow believes strongly in the customer owning their solution, and to provide the best foundation for success, Oracle University can give you the RightNow knowledge and skills you need. This is a selection of the courses offered: RightNow Customer Service Administration Rel 12.02 (3 days) Available as In Class and Live Virtual Class (Release 11.11 is available as In Class, Live Virtual Class and Training On Demand) This course familiarises users with the tasks and concepts needed to configure and maintain their system. RightNow Customer Portal Designer and Contact Center Experience Designer Administration Rel 12.02 (2 days) Available as In Class and Live Virtual Class (Release 11.11 is available as In Class, Live Virtual Class and Training On Demand) This course introduces basic CP structure and how to make changes to the look, feel and behaviour of their self-service pages RightNow Analytics Rel 12.02 (2 days) Available as In Class, Live Virtual Class and Training On Demand (Release 11.11 is available as In Class and Live Virtual Class) This course equips users with the skills necessary to understand data supplied by standard reports and to create custom reports RightNow Integration and Customization For Developers Rel 12.02 (5-days) Available as In Class and Live Virtual Class (Release 11.11 is available as In Class, Live Virtual Class and Training On Demand) This course is for experienced web developers and offers an introduction to Add-In development using the Desktop Add-In Framework and introduces the core knowledge that developers need to begin integrating Oracle RightNow CX with other systems A full list of courses offered can be found on the Oracle University website. For more information and course dates please get in contact with your local Oracle University team. On top of the Service components, the suite also provides marketing tools, complex survey creation and tracking and sales functionality. I’m a fan of the application, and I think I’ve made that clear: It’s completely geared up to providing customers with support at point of need. It can be configured to meet even the most stringent of business requirements. Oracle RightNow is passionate about, and committed to, providing the best customer experience possible. Oracle RightNow CX is the application that makes it possible. About the Author: Sarah Anderson worked for RightNow for 4 years in both in both a consulting and training delivery capacity. She is now a Senior Instructor with Oracle University, delivering the following Oracle RightNow courses: RightNow Customer Service Administration RightNow Analytics RightNow Customer Portal Designer and Contact Center Experience Designer Administration RightNow Marketing and Feedback

  Read the article

• "Yes, but that's niche."

  - by Geertjan

  JavaOne 2012 has come to an end though it feels like it hasn't even started yet! What happened, time is a weird thing. Too many things to report on. James Gosling's appearance at the JavaOne community keynote was seen, by everyone (which is quite a lot) of people I talked to, as the highlight of the conference. It was interesting that the software for the Duke's Choice Award winning Liquid Robotics that James Gosling is now part of and came to talk about is a Swing application that uses the WorldWind libraries. It was also interesting that James Gosling pointed out to the conference: "There are things you can't do using HTML." That brings me to the wonderful counter argument to the above, which I spend my time running into a lot: "Yes, but that's niche." It's a killer argument, i.e., it kills all discussions completely in one fell swoop. Kind of when you're talking about someone and then this sentence drops into the conversation: "Yes, but she's got cancer now." Here's one implementation of "Yes, but that's niche": Person A: All applications are moving to the web, tablet, and mobile phone. That's especially true now with HTML5, which is going to wipe away everything everywhere and all applications are going to be browser based. Person B: What about air traffic control applications? Will they run on mobile phones too? And do you see defence applications running in a browser? Don't you agree that there are multiple scenarios imaginable where the Java desktop is the optimal platform for running applications? Person A: Yes, but that's niche. Here's another implementation, though it contradicts the above [despite often being used by the same people], since JavaFX is a Java desktop technology: Person A: Swing is dead. Everyone is going to be using purely JavaFX and nothing else. Person B: Does JavaFX have a docking framework and a module system? Does it have a plugin system?  These are some of the absolutely basic requirements of Java desktop software once you get to high end systems, e.g., banks, defence force, oil/gas services. Those kinds of applications need a web browser and so they love the JavaFX WebView component and they also love the animated JavaFX charting components. But they need so much more than that, i.e., an application framework. Aren't there requirements that JavaFX isn't meeting since it is a UI toolkit, just like Swing is a UI toolkit, and what they have in common is their lack, i.e., natively, of any kind of application framework? Don't people need more than a single window and a monolithic application structure? Person A: Yes, but that's niche. In other words, anything that doesn't fit within the currently dominant philosophy is "niche", for no other reason than that it doesn't fit within the currently dominant philosophy... regardless of the actual needs of real developers. Saying "Yes, but that's niche", kills the discussion completely, because it relegates one side of the conversation to the arcane and irrelevant corners of the universe. You're kind of like Cobol now, as soon as "Yes, but that's niche" is said. What's worst about "Yes, but that's niche" is that it doesn't enter into any discussion about user requirements, i.e., there's so few that need this particular solution that we don't even need to talk about them anymore. Note, of course, that I'm not referring specifically or generically to anyone or anything in particular. Just picking up from conversations I've picked up on as I was scurrying around the Hilton's corridors while looking for the location of my next presentation over the past few days. It does, however, mean that there were people thinking "Yes, but that's niche" while listening to James Gosling pointing out that HTML is not the be-all and end-all of absolutely everything. And so this all leaves me wondering: How many applications must be part of a niche for the niche to no longer be a niche? And what if there are multiple small niches that have the same requirements? Don't all those small niches together form a larger whole, one that should be taken seriously, i.e., a whole that is not a niche?

  Read the article

• The Linux powered LAN Gaming House

  - by sachinghalot

  LAN parties offer the enjoyment of head to head gaming in a real-life social environment. In general, they are experiencing decline thanks to the convenience of Internet gaming, but Kenton Varda is a man who takes his LAN gaming very seriously. His LAN gaming house is a fascinating project, and best of all, Linux plays a part in making it all work.Varda has done his own write ups (short, long), so I'm only going to give an overview here. The setup is a large house with 12 gaming stations and a single server computer.The client computers themselves are rack mounted in a server room, and they are linked to the gaming stations on the floor above via extension cables (HDMI for video and audio and USB for mouse and keyboard). Each client computer, built into a 3U rack mount case, is a well specced gaming rig in its own right, sporting an Intel Core i5 processor, 4GB of RAM and an Nvidia GeForce 560 along with a 60GB SSD drive.Originally, the client computers ran Ubuntu Linux rather than Windows and the games executed under WINE, but Varda had to abandon this scheme. As he explains on his site:"Amazingly, a majority of games worked fine, although many had minor bugs (e.g. flickering mouse cursor, minor rendering artifacts, etc.). Some games, however, did not work, or had bad bugs that made them annoying to play."Subsequently, the gaming computers have been moved onto a more conventional gaming choice, Windows 7. It's a shame that WINE couldn't be made to work, but I can sympathize as it's rare to find modern games that work perfectly and at full native speed. Another problem with WINE is that it tends to suffer from regressions, which is hardly surprising when considering the difficulty of constantly improving the emulation of the Windows API. Varda points out that he preferred working with Linux clients as they were easier to modify and came with less licensing baggage.Linux still runs the server and all of the tools used are open source software. The hardware here is a Intel Xeon E3-1230 with 4GB of RAM. The storage hanging off this machine is a bit more complex than the clients. In addition to the 60GB SSD, it also has 2x1TB drives and a 240GB SDD.When the clients were running Linux, they booted over PXE using a toolchain that will be familiar to anyone who has setup Linux network booting. DHCP pointed the clients to the server which then supplied PXELINUX using TFTP. When booted, file access was accomplished through network block device (NBD). This is a very easy to use system that allows you to serve the contents of a file as a block device over the network. The client computer runs a user mode device driver and the device can be mounted within the file system using the mount command.One snag with offering file access via NBD is that it's difficult to impose any security restrictions on different areas of the file system as the server only sees a single file. The advantage is perfomance as the client operating system simply sees a block device, and besides, these security issues aren't relevant in this setup.Unfortunately, Windows 7 can't use NBD, so, Varda had to switch to iSCSI (which works in both server and client mode under Linux). His network cards are not compliant with this standard when doing a netboot, but fortunately, gPXE came to the rescue, and he boostraps it over PXE. gPXE is also available as an ISO image and is worth knowing about if you encounter an awkward machine that can't manage a network boot. It can also optionally boot from a HTTP server rather than the more traditional TFTP server.According to Varda, booting all 12 machines over the Gigabit Ethernet network is surprisingly fast, and once booted, the machines don't seem noticeably slower than if they were using local storage. Once loaded, most games attempt to load in as much data as possible, filling the RAM, and the the disk and network bandwidth required is small. It's worth noting that these are aspects of this project that might differ from some other thin client scenarios.At time of writing, it doesn't seem as though the local storage of the client machines is being utilized. Instead, the clients boot into Windows from an image on the server that contains the operating system and the games themselves. It uses the copy on write feature of LVM so that any writes from a client are added to a differencing image allocated to that client. As the administrator, Varda can log into the Linux server and authorize changes to the master image for updates etc.SummaryOverall, Varda estimates the total cost of the project at about $40,000, and of course, he needed a property that offered a large physical space in order to house the computers and the gaming workstations. Obviously, this project has stark differences to most thin client projects. The balance between storage, network usage, GPU power and security would not be typical of an office installation, for example. The only letdown is that WINE proved to be insufficiently compatible to run a wide variety of modern games, but that is, perhaps, asking too much of it, and hats off to Varda for trying to make it work.

  Read the article

• Updating a database connection password using a script

  - by Tim Dexter

  An interesting customer requirement that I thought was worthy of sharing today. Thanks to James for the requirement and Bryan for the proposed solution and me for testing the solution and proving it works :0) A customers implementation of Sarbanes Oxley requires them to change all database account passwords every 90 days. This is scripted leveraging shell scripts today for most of their environments. But how can they manage the BI Publisher connections? Now, the customer is running 11g and therefore using weblogic on the middle tier, which is the first clue to Bryans proposed solution. To paraphrase and embellish Bryan's solution a little; why not use a JNDI connection from BIP to the database. Then employ the web logic scripting engine to make updates to the JNDI as needed? BIP is completely uninvolved and with a little 'timing' users will be completely unaware of the password updates i.e. change the password when reports are not being executed. Perfect! James immediately tracked down the WLST script that could be used here, http://middlewaremagic.com/weblogic/?p=4261 (thanks Ravish) Now it was just a case of testing the theory. Some steps: Create the JNDI connection in WLS Create the JNDI connection in BI Publisher pointing to the WLS connection Build new data models using or re-point data sources to use the JNDI connection. Create the WLST script to update the WLS JNDI password as needed. Test! Some details. Creating the JNDI connection in web logic is pretty straightforward. Log into hte console and look for Data Sources under the Services section of the home page and click it Click New >> Generic Datasource Give the connection a name. For the JNDI name, prefix it with 'jdbc/' so I have 'jdbc/localdb' - this name is important you'll need it on the BIP side. Select your db type - this will influence the drivers and information needed on the next page. Being a company man, Im using an Oracle db. Click Next Select the driver of choice, theres lots I know, you can read about them I just chose 'Oracle's Driver (Thin) for Instance connections; Versions 9.0.1 and later' Click Next >> Next Fill out the db name (SID), server, port, username to connect and password >> Next Test the config to ensure you can connect. >> Next Now you need to deploy the connection to your BI server, select it and click Next. You're done with the JNDI config. Creating the JNDI connection on the Publisher side is covered here. Just remember to the connection name you created in WLS e.g. 'jdbc/localdb' Not gonna tell you how to do this, go read the user guide :0) Suffice to say, it works. This requires a little reading around the subject to understand the scripting engine and how to execute scripts. Nicely covered here. However a bit of googlin' and I found an even easier way of running the script. ${ServerHome}/common/bin/wlst.sh updatepwd.py Where updatepwd.py is my script file, it can be in another directory. As part of the wlst.sh script your environment is set up for you so its very simple to execute. The nitty gritty: Need to take Ravish's script above and create a file with a .py extension. Its going to need some modification, as he explains on the web page, to make it work in your environment. I played around with it for a while but kept running into errors. The script as is, tries to loop through all of your connections and modify the user and passwords for each. Not quite what we are looking for. Remember our requirement is to just update the password for a given connection. I also found another issue with the script. WLS 10.x does not allow updates to passwords using clear type ie un-encrypted text while the server is in production mode. Its a bit much to set it back to developer mode bounce it, change the passwords and then bounce and then change back to production and bounce again. After lots of messing about I finally came up with the following: ############################################################################# # # Update password for JNDI connections # ############################################################################# print("*** Trying to Connect.... *****") connect('weblogic','welcome1','t3://localhost:7001') print("*** Connected *****") edit() startEdit() print ("*** Encrypt the password ***") en = encrypt('hr') print "Encrypted pwd: ", en print ("*** Changing pwd for LocalDB ***") dsName = 'LocalDB' print 'Changing Password for DataSource ', dsName cd('/JDBCSystemResources/'+dsName+'/JDBCResource/'+dsName+'/JDBCDriverParams/'+dsName) set('PasswordEncrypted',en) save() activate() Its pretty simple and you can expand on it to loop through the data sources and change each as needed. I have hardcoded the password into the file but you can pass it as a parameter as needed using the properties file method. Im not going to get into the detail of that here but its covered with an example here. Couple of points to note: 1. The change to the password requires a server bounce to get the changes picked up. You can add that to the shell script you will use to call the script above. 2. The script above needs to be run from the MW_HOME\user_projects\domains\bifoundation_domain directory to get the encryption libraries set correctly. My command to run the whole script was: d:\oracle\bi_mw\wlserver_10.3\common\bin\wlst.cmd updatepwd.py - where wlst.cmd is the scripting command line and updatepwd.py was my update password script above. I have not quite spoon fed everything you need to make it a robust script but at least you know you can do it and you can work out the rest I think :0)

  Read the article

• What's going on with my wireless?

  - by Mark Scott

  The WiFi on my Acer laptop (it's a 3810TZ, with Intel Corporation Centrino Wireless-N 1000) works flawlessly on Ubuntu 11.04. On 11.10, it's continually up and down, and it fills the system log with messages such as those below. What is going on? It seems to be unable to decide which regulatory domain it's in. Despite the system configuration being quite clearly set to UK it persists in configuring itself as though it was opeating in Taiwan! Nov 22 15:34:37 MES3810 wpa_supplicant[1053]: WPA: 4-Way Handshake failed - pre-shared key may be incorrect Nov 22 15:34:37 MES3810 wpa_supplicant[1053]: CTRL-EVENT-DISCONNECTED bssid=00:50:7f:72:bf:b0 reason=15 Nov 22 15:34:37 MES3810 wpa_supplicant[1053]: CTRL-EVENT-DISCONNECTED bssid=00:00:00:00:00:00 reason=3 Nov 22 15:34:37 MES3810 kernel: [18239.240355] cfg80211: All devices are disconnected, going to restore regulatory settings Nov 22 15:34:37 MES3810 kernel: [18239.240362] cfg80211: Restoring regulatory settings Nov 22 15:34:37 MES3810 kernel: [18239.240368] cfg80211: Calling CRDA to update world regulatory domain Nov 22 15:34:37 MES3810 kernel: [18239.240408] wlan0: deauthenticating from 00:50:7f:72:bf:b0 by local choice (reason=3) Nov 22 15:34:37 MES3810 NetworkManager[875]: (wlan0): supplicant interface state: 4-way handshake - disconnected Nov 22 15:34:37 MES3810 kernel: [18239.246556] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain Nov 22 15:34:37 MES3810 kernel: [18239.246563] cfg80211: World regulatory domain updated: Nov 22 15:34:37 MES3810 kernel: [18239.246567] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Nov 22 15:34:37 MES3810 kernel: [18239.246572] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.246577] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.246582] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.246587] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.246592] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 22 15:34:37 MES3810 NetworkManager[875]: (wlan0): supplicant interface state: disconnected - scanning Nov 22 15:34:37 MES3810 wpa_supplicant[1053]: Trying to authenticate with 00:50:7f:72:bf:b0 (SSID='PoplarHouse' freq=2412 MHz) Nov 22 15:34:37 MES3810 NetworkManager[875]: (wlan0): supplicant interface state: scanning - authenticating Nov 22 15:34:37 MES3810 kernel: [18239.509877] wlan0: authenticate with 00:50:7f:72:bf:b0 (try 1) Nov 22 15:34:37 MES3810 wpa_supplicant[1053]: Trying to associate with 00:50:7f:72:bf:b0 (SSID='PoplarHouse' freq=2412 MHz) Nov 22 15:34:37 MES3810 kernel: [18239.512276] wlan0: authenticated Nov 22 15:34:37 MES3810 kernel: [18239.512615] wlan0: associate with 00:50:7f:72:bf:b0 (try 1) Nov 22 15:34:37 MES3810 NetworkManager[875]: (wlan0): supplicant interface state: authenticating - associating Nov 22 15:34:37 MES3810 kernel: [18239.516508] wlan0: RX ReassocResp from 00:50:7f:72:bf:b0 (capab=0x431 status=0 aid=1) Nov 22 15:34:37 MES3810 kernel: [18239.516514] wlan0: associated Nov 22 15:34:37 MES3810 wpa_supplicant[1053]: Associated with 00:50:7f:72:bf:b0 Nov 22 15:34:37 MES3810 kernel: [18239.529097] cfg80211: Calling CRDA for country: TW Nov 22 15:34:37 MES3810 NetworkManager[875]: (wlan0): supplicant interface state: associating - associated Nov 22 15:34:37 MES3810 kernel: [18239.535680] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535688] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535692] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535697] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535702] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535707] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535711] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535716] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535720] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535725] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535730] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535735] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535739] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535744] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535748] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535753] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535757] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535763] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535767] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535772] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535777] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535782] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535786] cfg80211: Disabling freq 2467 MHz Nov 22 15:34:37 MES3810 kernel: [18239.535789] cfg80211: Disabling freq 2472 MHz Nov 22 15:34:37 MES3810 kernel: [18239.535794] cfg80211: Regulatory domain changed to country: TW Nov 22 15:34:37 MES3810 kernel: [18239.535797] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Nov 22 15:34:37 MES3810 kernel: [18239.535802] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535807] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535812] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) Nov 22 15:34:38 MES3810 NetworkManager[875]: (wlan0): supplicant interface state: associated - 4-way handshake Any ideas?

  Read the article

• The Sound of Two Toilets Flushing: Constructive Criticism for Virgin Atlantic Complaints Department

  - by Geertjan

  I recently had the experience of flying from London to Johannesburg and back with Virgin Atlantic. The good news was that it was the cheapest flight available and that the take off and landing were absolutely perfect. Hence I really have no reason to complain. Instead, I'd like to offer some constructive criticism which hopefully Richard Branson will find sometime while googling his name. Or maybe someone from the Virgin Atlantic Complaints Department will find it, whatever, just want to put this information out there. Arrangement of restroom facilities. Maybe next time you design an airplane, consider not putting your toilets at a right angle right next to your rows of seats. Being able to reach, without even needing to stretch your arm, from your seat to close, yet again, a toilet door that someone, someone obviously sitting very far from the toilets, carelessly forgot to close is not an indicator of quality interior design. Have you noticed how all other airplanes have their toilets in a cubicle separated from the rows of seats? On those airplanes, people sitting in the seats near the toilets are not constantly being woken up throughout the night whenever someone enters/exits the toilet, whenever the light in the toilet is suddenly switched on, and whenever one of the toilets flushes. Bonus points for Virgin Atlantic passengers in the seats adjoining the toilets is when multiple toilets are flushed simultaneously and multiple passengers enter/exit them at the same time, a bit like an unasked for low budget musical of suddenly illuminated grumpy people in crumpled clothes. What joy that brings at 3 AM is hard to describe. Seats with extra leg room. You know how other airplanes have the seats with the extra leg room? You know what those seats tend to have? Extra leg room. It's really interesting how Virgin Atlantic's seats with extra leg room actually have no extra leg room at all. It should have been a give away, the fact that these special seats are found in the same rows as the standard seats, rather than on the cusp of real glory which is where most airlines put their extra leg room seats, with the only actual difference being that they have a slightly different color. Had you called them "seats with a different color" (i.e., almost not quite green, rather than something vaguely hinting at blue), at least I'd have known what I was getting. Picture the joy at 3 AM, rudely awakened from nightmarish slumber, partly grateful to have been released from a grayish dream of faceless zombies resembling one or two of those in a recent toilet line, by multiple adjoining toilets flushing simultaneously, while you're sitting in a seat with extra leg room that has exactly as much leg room as the seats in neighboring rows. You then have a choice of things to be sincerely annoyed about. Food from the '80's. In the '80's, airplane food came in soggy containers and even breakfast, the most important meal of the day, was a sad heap of vaguely gray colors. The culinary highlight tended to be a squashed tomato, which must have been mashed to a pulp with a brick prior to being regurgitated by a small furry animal, and there was also always a piece of immensely horrid pumpkin, as well as a slice of spongy something you'd never seen before. Sausages and mash at 6 AM on an airplane was always a heavy lump of horribleness. Thankfully, all airlines throughout the world changed from this puke inducing strategy around 1987 sometime. Not Virgin Atlantic, of course. The fatty sausages and mash are still there, bringing you flashbacks to Duran Duran, which is what you were listening to (on your walkman) the last time you saw it in an airplane. Even the golden oldie "squashed tomato attached by slime to three wet peas" is on the menu. How wonderful to have all this in a cramped seat with a long row of early morning bleariness lined up for the toilets, right at your side, bumping into your elbow, groggily, one by one, one after another, more and more, fumble-open-door-silence-flush-fumble-open-door, and on and on, while you tentatively push your fork through a soggy pile of colorless mush, fighting the urge to throw up on the stinky socks of whatever nightmarish zombie is bumping into your elbow at the time. But, then again, the plane landed without a hitch, in fact, extremely smoothly, so I'm certainly not blaming the pilots.

  Read the article

• Session Report - Java on the Raspberry Pi

  - by Janice J. Heiss

  On mid-day Wednesday, the always colorful Oracle Evangelist Simon Ritter demonstrated Java on the Raspberry Pi at his session, “Do You Like Coffee with Your Dessert?”. The Raspberry Pi consists of a credit card-sized single-board computer developed in the UK with the intention of stimulating the teaching of basic computer science in schools. “I don't think there is a single feature that makes the Raspberry Pi significant,” observed Ritter, “but a combination of things really makes it stand out. First, it's $35 for what is effectively a completely usable computer. You do have to add a power supply, SD card for storage and maybe a screen, keyboard and mouse, but this is still way cheaper than a typical PC. The choice of an ARM (Advanced RISC Machine and Acorn RISC Machine) processor is noteworthy, because it avoids problems like cooling (no heat sink or fan) and can use a USB power brick. When you add in the enormous community support, it offers a great platform for teaching everyone about computing.”Some 200 enthusiastic attendees were present at the session which had the feel of Simon Ritter sharing a fun toy with friends. The main point of the session was to show what Oracle was doing to support Java on the Raspberry Pi in a way that is entertaining and fun. Ritter pointed out that, in addition to being great for teaching, it’s an excellent introduction to the ARM architecture, and runs well with Java and will get better once it has official hard float support. The possibilities are vast.Ritter explained that the Raspberry Pi Project started in 2006 with the goal of devising a computer to inspire children; it drew inspiration from the BBC Micro literacy project of 1981 that produced a series of microcomputers created by the Acorn Computer company. It was officially launched on February 29, 2012, with a first production of 10,000 boards. There were 100,000 pre-orders in one day; currently about 4,000 boards are produced a day. Ritter described the specification as follows:* CPU: ARM 11 core running at 700MHz Broadcom SoC package Can now be overclocked to 1GHz (without breaking the warranty!) * Memory: 256Mb* I/O: HDMI and composite video 2 x USB ports (Model B only) Ethernet (Model B only) Header pins for GPIO, UART, SPI and I2C He took attendees through a brief history of ARM Architecture:* Acorn BBC Micro (6502 based) Not powerful enough for Acorn’s plans for a business computer * Berkeley RISC Project UNIX kernel only used 30% of instruction set of Motorola 68000 More registers, less instructions (Register windows) One chip architecture to come from this was… SPARC * Acorn RISC Machine (ARM) 32-bit data, 26-bit address space, 27 registers First machine was Acorn Archimedes * Spin off from Acorn, Advanced RISC MachinesNext he presented its features:* 32-bit RISC Architecture–  ARM accounts for 75% of embedded 32-bit CPUs today– 6.1 Billion chips sold last year (zero manufactured by ARM)* Abstract architecture and microprocessor core designs– Raspberry Pi is ARM11 using ARMv6 instruction set* Low power consumption– Good for mobile devices– Raspberry Pi can be powered from 700mA 5V only PSU– Raspberry Pi does not require heatsink or fanHe described the current ARM Technology:* ARMv6– ARM 11, ARM Cortex-M* ARMv7– ARM Cortex-A, ARM Cortex-M, ARM Cortex-R* ARMv8 (Announced)– Will support 64-bit data and addressingHe next gave the Java Specifics for ARM: Floating point operations* Despite being an ARMv6 processor it does include an FPU– FPU only became standard as of ARMv7* FPU (Hard Float, or HF) is much faster than a software library* Linux distros and Oracle JVM for ARM assume no HF on ARMv6– Need special build of both– Raspbian distro build now available– Oracle JVM is in the works, release date TBDNot So RISCPerformance Improvements* DSP Enhancements* Jazelle* Thumb / Thumb2 / ThumbEE* Floating Point (VFP)* NEON* Security Enhancements (TrustZone)He spent a few minutes going over the challenges of using Java on the Raspberry Pi and covered:* Sound* Vision * Serial (TTL UART)* USB* GPIOTo implement sound with Java he pointed out:* Sound drivers are now included in new distros* Java Sound API– Remember to add audio to user’s groups– Some bits work, others not so much* Playing (the right format) WAV file works* Using MIDI hangs trying to open a synthesizer* FreeTTS text-to-speech– Should work once sound works properlyHe turned to JavaFX on the Raspberry Pi:* Currently internal builds only– Will be released as technology preview soon* Work involves optimal implementation of Prism graphics engine– X11?* Once the JavaFX implementation is completed there will be little of concern to developers-- It’s just Java (WORA). He explained the basis of the Serial Port:* UART provides TTL level signals (3.3V)* RS-232 uses 12V signals* Use MAX3232 chip to convert* Use this for access to serial consoleHe summarized his key points. The Raspberry Pi is a very cool (and cheap) computer that is great for teaching, a great introduction to ARM that works very well with Java and will work better in the future. The opportunities are limitless. For further info, check out, Raspberry Pi User Guide by Eben Upton and Gareth Halfacree. From there, Ritter tried out several fun demos, some of which worked better than others, but all of which were greeted with considerable enthusiasm and support and good humor (even when he ran into some glitches).  All in all, this was a fun and lively session.

  Read the article

• Modularity through HTTP

  - by Michael Williamson

  As programmers, we strive for modularity in the code we write. We hope that splitting the problem up makes it easier to solve, and allows us to reuse parts of our code in other applications. Object-orientation is the most obvious of many attempts to get us closer to this ideal, and yet one of the most successful approaches is almost accidental: the web. Programming languages provide us with functions and classes, and plenty of other ways to modularize our code. This allows us to take our large problem, split it into small parts, and solve those small parts without having to worry about the whole. It also makes it easier to reason about our code. So far, so good, but now that we’ve written our small, independent module, for example to send out e-mails to my customers, we’d like to reuse it in another application. By creating DLLs, JARs or our platform’s package container of choice, we can do just that – provided our new application is on the same platform. Want to use a Java library from C#? Well, good luck – it might be possible, but it’s not going to be smooth sailing. Even if a library exists, it doesn’t mean that using it going to be a pleasant experience. Say I want to use Java to write out an XML document to an output stream. You’d imagine this would be a simple one-liner. You’d be wrong: import org.w3c.dom.*; import java.io.*; import javax.xml.transform.*; import javax.xml.transform.dom.*; import javax.xml.transform.stream.*; private static final void writeDoc(Document doc, OutputStream out) throws IOException { try { Transformer t = TransformerFactory.newInstance().newTransformer(); t.setOutputProperty(OutputKeys.DOCTYPE_SYSTEM, doc.getDoctype().getSystemId()); t.transform(new DOMSource(doc), new StreamResult(out)); } catch (TransformerException e) { throw new AssertionError(e); // Can't happen! } } Most of the time, there is a good chance somebody else has written the code before, but if nobody can understand the interface to that code, nobody’s going to use it. The result is that most of the code we write is just a variation on a theme. Despite our best efforts, we’ve fallen a little short of our ideal, but the web brings us closer. If we want to send e-mails to our customers, we could write an e-mail-sending library. More likely, we’d use an existing one for our language. Even then, we probably wouldn’t have niceties like A/B testing or DKIM signing. Alternatively, we could just fire some HTTP requests at MailChimp, and get a whole slew of features without getting anywhere near the code that implements them. The web is inherently language agnostic. So long as your language can send and receive text over HTTP, and probably parse some JSON, you’re about as well equipped as anybody. Instead of building libraries for a specific language, we can build a service that almost every language can reuse. The text-based nature of HTTP also helps to limit the complexity of the API. As SOAP will attest, you can still make a horrible mess using HTTP, but at least it is an obvious horrible mess. Complex data structures are tedious to marshal to and from text, providing a strong incentive to keep things simple. By contrast, spotting the complexities in a class hierarchy is often not as easy. HTTP doesn’t solve every problem. It probably isn’t such a good idea to use it inside an inner loop that’s executed thousands of times per second. What’s more, the HTTP approach might introduce some new problems. We often need to add a thin shim to each application that we wish to communicate over HTTP. For instance, we might need to write a small plugin in PHP if we want to integrate WordPress into our system. Suddenly, instead of a system written in one language, we’re maintaining a system with several distinct languages and platforms. Even then, we should strive to avoid re-implementing the same old thing. As programmers, we consistently underestimate both the cost of building a system and the ongoing maintenance. If we allow ourselves to integrate existing applications, even if they’re in unfamiliar languages, we save ourselves those development and maintenance costs, as well as being able to pick the best solution for our problem. Thanks to the web, HTTP is often the easiest way to get there.

  Read the article

• How-to populate different select list content per table row

  - by frank.nimphius

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} A frequent requirement posted on the OTN forum is to render cells of a table column using instances of af:selectOneChoices with each af:selectOneChoice instance showing different list values. To implement this use case, the select list of the table column is populated dynamically from a managed bean for each row. The table's current rendered row object is accessible in the managed bean using the #{row} expression, where "row" is the value added to the table's var property. <af:table var="row">   ...   <af:column ...>     <af:selectOneChoice ...>         <f:selectItems value="#{browseBean.items}"/>     </af:selectOneChoice>   </af:column </af:table> The browseBean managed bean referenced in the code snippet above has a setItems and getItems method defined that is accessible from EL using the #{browseBean.items} expression. When the table renders, then the var property variable - the #{row} reference - is filled with the data object displayed in the current rendered table row. The managed bean getItems method returns a List<SelectItem>, which is the model format expected by the f:selectItems tag to populate the af:selectOneChoice list. public void setItems(ArrayList<SelectItem> items) {} //this method is executed for each table row public ArrayList<SelectItem> getItems() {   FacesContext fctx = FacesContext.getCurrentInstance();   ELContext elctx = fctx.getELContext();   ExpressionFactory efactory =          fctx.getApplication().getExpressionFactory();          ValueExpression ve =          efactory.createValueExpression(elctx, "#{row}", Object.class);      Row rw = (Row) ve.getValue(elctx);         //use one of the row attributes to determine which list to query and   //show in the current af:selectOneChoice list  // ...  ArrayList<SelectItem> alsi = new ArrayList<SelectItem>();  for( ... ){      SelectItem item = new SelectItem();        item.setLabel(...);        item.setValue(...);        alsi.add(item);   }   return alsi;} For better performance, the ADF Faces table stamps it data rows. Stamping means that the cell renderer component - af:selectOneChoice in this example - is instantiated once for the column and then repeatedly used to display the cell data for individual table rows. This however means that you cannot refresh a single select one choice component in a table to change its list values. Instead the whole table needs to be refreshed, rerunning the managed bean list query. Be aware that having individual list values per table row is an expensive operation that should be used only on small tables for Business Services with low latency data fetching (e.g. ADF Business Components and EJB) and with server side caching strategies for the queried data (e.g. storing queried list data in a managed bean in session scope).

  Read the article

• Loading XML file containing leading zeros with SSIS preserving the zeros

  - by Compudicted

  Visiting the MSDN SQL Server Integration Services Forum oftentimes I could see that people would pop up asking this question: “why I am not able to load an element from an XML file that contains zeros so the leading/trailing zeros would remain intact?”. I started to suspect that such a trivial and often-required operation perhaps is being misunderstood by the developer community. I would also like to add that the whole state of affairs surrounding the XML today is probably also going to be increasingly affected by a motion of people who dislike XML in general and many aspects of it as XSD and XSLT invoke a negative reaction at best. Nevertheless, XML is in wide use today and its importance as a bridge between diverse systems is ever increasing. Therefore, I deiced to write up an example of loading an arbitrary XML file that contains leading zeros in one of its elements using SSIS so the leading zeros would be preserved keeping in mind the goal on simplicity into a table in SQL Server database. To start off bring up your BIDS (running as admin) and add a new Data Flow Task (DFT). This DFT will serve as container to adding our XML processing elements (besides, the XML Source is not available anywhere else other than from within the DFT). Double-click your DFT and drag and drop the XMS Source component from the Tool Box’s Data Flow Sources. Now, let the fun begin! Being inspired by the upcoming Christmas I created a simple XML file with one set of data that contains an imaginary SSN number of Rudolph containing several leading zeros like 0000003. This file can be viewed here. To configure the XML Source of course it is quite intuitive to point it to our XML file, next what the XML source needs is either an embedded schema (XSD) or it can generate one for us. In lack of the one I opted to auto-generate it for me and I ended up with an XSD that looked like: <?xml version="1.0"?> <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema"> <xs:element name="XMasEvent"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" name="CaseInfo"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" name="ID" type="xs:unsignedByte" /> <xs:element minOccurs="0" name="CreatedDate" type="xs:unsignedInt" /> <xs:element minOccurs="0" name="LastName" type="xs:string" /> <xs:element minOccurs="0" name="FirstName" type="xs:string" /> <xs:element minOccurs="0" name="SSN" type="xs:unsignedByte" /> <!-- Becomes string -- > <xs:element minOccurs="0" name="DOB" type="xs:unsignedInt" /> <xs:element minOccurs="0" name="Event" type="xs:string" /> <xs:element minOccurs="0" name="ClosedDate" /> </xs:sequence> </xs:complexType> </xs:element> </xs:sequence> </xs:complexType> </xs:element> </xs:schema> As an aside on the XML file: if your XML file does not contain the outer node (<XMasEvent>) then you may end up in a situation where you see just one field in the output. Now please note that the SSN element’s data type was chosen to be of unsignedByte (and this is for a reason). The reason is stemming from the fact all our figures in the element are digits, this is good, but this is not exactly what we need, because if we will attempt to load the data with this XSD then we are going to either get errors on the destination or most typically lose the leading zeros. So the next intuitive choice is to change the data type to string. Besides, if a SSIS package was already created based on this XSD and the data type change was done thereafter, one should re-set the metadata by right-clicking the XML Source and choosing “Advanced Editor” in which there is a refresh button at the bottom left which will do the trick. So far so good, we are ready to load our XML file, well actually yes, and no, in my experience typically some data conversion may be required. So depending on your data destination you may need to tweak the data types targeted. Let’s add a Data Conversion Task to our DFT. Your package should look like: To make the story short I only will cover the SSN field, so in my data source the target SQL Table has it as nchar(10) and we chose string in our XSD (yes, this is a big difference), under such circumstances the SSIS will complain. So will go and manipulate on the data type of SSN by making it Unicode String (DT_WSTR), World String per se. The conversion should look like: The peek at the Metadata: We are almost there, now all we need is to configure the destination. For simplicity I chose SQL Server Destination. The mapping is a breeze, F5 and I am able to insert my data into SQL Server now! Checking the zeros – they are all intact!

  Read the article

• Moving DataSets through BizTalk

  - by EltonStoneman

  [Source: http://geekswithblogs.net/EltonStoneman] Yuck. But sometimes you have to, so here are a couple of things to bear in mind: Schemas Point a codegen tool at a WCF endpoint which exposes a DataSet and it will generate an XSD which describes the DataSet like this: <xs:elementminOccurs="0"name="GetDataSetResult"nillable="true">  <xs:complexType>     <xs:annotation>       <xs:appinfo>         <ActualTypeName="DataSet"                     Namespace="http://schemas.datacontract.org/2004/07/System.Data"                     xmlns="http://schemas.microsoft.com/2003/10/Serialization/" />       </xs:appinfo>     </xs:annotation>     <xs:sequence>       <xs:elementref="xs:schema" />       <xs:any />     </xs:sequence>  </xs:complexType> </xs:element>  In a serialized instance, the element of type xs:schema contains a full schema which describes the structure of the DataSet – tables, columns etc. The second element, of type xs:any, contains the actual content of the DataSet, expressed as DiffGrams: <GetDataSetResult>  <xs:schemaid="NewDataSet"xmlns:xs="http://www.w3.org/2001/XMLSchema"xmlns=""xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">     <xs:elementname="NewDataSet"msdata:IsDataSet="true"msdata:UseCurrentLocale="true">       <xs:complexType>         <xs:choiceminOccurs="0"maxOccurs="unbounded">           <xs:elementname="Table1">             <xs:complexType>               <xs:sequence>                 <xs:elementname="Id"type="xs:string"minOccurs="0" />                 <xs:elementname="Name"type="xs:string"minOccurs="0" />                 <xs:elementname="Date"type="xs:string"minOccurs="0" />               </xs:sequence>             </xs:complexType>           </xs:element>         </xs:choice>       </xs:complexType>     </xs:element>  </xs:schema>  <diffgr:diffgramxmlns:diffgr="urn:schemas-microsoft-com:xml-diffgram-v1"xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">     <NewDataSetxmlns="">       <Table1diffgr:id="Table11"msdata:rowOrder="0"diffgr:hasChanges="inserted">         <Id>377fdf8d-cfd1-4975-a167-2ddb41265def</Id>         <Name>157bc287-f09b-435f-a81f-2a3b23aff8c4</Name>         <Date>a5d78d83-6c9a-46ca-8277-f2be8d4658bf</Date>       </Table1>     </NewDataSet>  </diffgr:diffgram> </GetDataSetResult> Put the XSD into a BizTalk schema and it will fail to compile, giving you error: The 'http://www.w3.org/2001/XMLSchema:schema' element is not declared. You should be able to work around that, but I've had no luck in BizTalk Server 2006 R2 – instead you can safely change that xs:schema element to be another xs:any type: <xs:elementminOccurs="0"name="GetDataSetResult"nillable="true">  <xs:complexType>     <xs:sequence>       <xs:any />       <xs:any />     </xs:sequence>  </xs:complexType> </xs:element>  (This snippet omits the annotation, but you can leave it in the schema). For an XML instance to pass validation through the schema, you'll also need to flag the any attributes so they can contain any namespace and skip validation:  <xs:elementminOccurs="0"name="GetDataSetResult"nillable="true">  <xs:complexType>     <xs:sequence>       <xs:anynamespace="##any"processContents="skip" />       <xs:anynamespace="##any"processContents="skip" />     </xs:sequence>  </xs:complexType> </xs:element>  You should now have a compiling schema which can be successfully tested against a serialised DataSet. Transforms If you're mapping a DataSet element between schemas, you'll need to use the Mass Copy Functoid to populate the target node from the contents of both the xs:any type elements on the source node: This should give you a compiled map which you can test against a serialized instance. And if you have a .NET consumer on the other side of the mapped BizTalk output, it will correctly deserialize the response into a DataSet.

  Read the article

• Training a 'replacement', how to enforce standards?

  - by Mohgeroth

  Not sure that this is the right stack exchange site to ask this of, but here goes... Scope I work for a small company that employs a few hundred people. The development team for the company is small and works out of visual foxpro. A specific department in the company hired me in as a 'lone gunman' to fix and enhance a pre-existing invoicing system. I've successfully taken an Access application that suffered from a lot of risks and limitations and converted it into a C# application driven off of a SQL server backend. I have recently obtained my undergraduate and am no expert by any means. To help make up for that I've felt that earning microsoft certifications will force me to understand more about .net and how it functions. So, after giving my notice with 9 months in advance, 3 months ago a replacement finally showed up. Their role is to learn what I have been designing to an attempt to support the applications designed in C#. The Replacement Fresh out of college with no real-world work experience, the first instinct for anything involving data was and still is listboxes... any time data is mentioned the list box is the control of choice for the replacement. This has gotten to the point, no matter how many times I discuss other controls, where I've seen 5 listboxes on a single form. Classroom experience was almost all C++ console development. So, an example of where I have concern is in a winforms application: Users need to key Reasons into a table to select from later. Given that I know that a strongly typed data set exists, I can just drag the data source from the toolbox and it would create all of this for me. I realize this is a simple example but using databinding is the key. For the past few months now we have been talking about the strongly typed dataset, how to use it and where it interacts with other controls. Data sets, how they work in relation to binding sources, adapters and data grid views. After handing this project off I expected questions about how to implement these since for me this is the way to do it. What happened next simply floors me: An instance of an adapter from the strongly typed dataset was created in the activate event of the form, a table was created and filled with data. Then, a loop was made to manually add rows to a listbox from this table. Finally, a variable was kept to do lookups to figure out what ID the record was for updates if required. How do they modify records you ask? That was my first question too. You won't believe how simple it is, all you do it double click and they type into a pop-up prompt the new value to change it to. As a data entry operator, all the modal popups would drive me absolutely insane. The final solution exceeds 100 lines of code that must be maintained. So my concern is that none of this is sinking in... the department is only allowed 20 hours a week of their time. Up until last week, we've only been given 4-5 hours a week if I'm lucky. The past week or so, I've been lucky to get 10. Question WHAT DO I DO?! I have 4 weeks left until I leave and they fully 'support' this application. I love this job and the opportunity it has given me but it's time for me to spread my wings and find something new. I am in no way, shape or form convinced that they are ready to take over. I do feel that the replacement has the technical ability to 'figure it out' but instead of learning they just write code to do all of this stuff manually. If the replacement wants to code differently in the end, as long as it works I'm fine with that as horrifiying at it looks. However to support what I have designed they MUST to understand how it works and how I have used controls and the framework to make 'magic' happen. This project has about 40 forms, a database with over 30 some odd tables, triggers and stored procedures. It relates labor to invoices to contracts to projections... it's not as simple as it was three years ago when I began this project and the department is now in a position where they cannot survive without it. How in the world can I accomplish any of the following?: Enforce standards or understanding in constent design when the department manager keeps telling them they can do it however they want to Find a way to engage the replacement in active learning of the framework and system design that support must be given for Gracefully inform sr. management that 5-9 hours a week is simply not enough time to learn about the department, pre-existing processes, applications that need to be supported AND determine where potential enhancements to the system go... Yes I know this is a wall of text, thanks for reading through me but I simply don't know what I should be doing. For me, this job is a monster of a reference and things would look extremely bad if I left and things fell apart. How do I handle this?

  Read the article

• YouTube Scalability Lessons

  - by Bertrand Matthelié

  @font-face { font-family: "Arial"; }@font-face { font-family: "Courier New"; }@font-face { font-family: "Wingdings"; }@font-face { font-family: "Calibri"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }h2 { margin: 12pt 0cm 3pt; page-break-after: avoid; font-size: 14pt; font-family: "Times New Roman"; font-style: italic; }a:link, span.MsoHyperlink { color: blue; text-decoration: underline; }a:visited, span.MsoHyperlinkFollowed { color: purple; text-decoration: underline; }span.Heading2Char { font-family: Calibri; font-weight: bold; font-style: italic; }div.Section1 { page: Section1; }ol { margin-bottom: 0cm; }ul { margin-bottom: 0cm; } Very interesting blog post by Todd Hoff at highscalability.com presenting “7 Years of YouTube Scalability Lessons in 30 min” based on a presentation from Mike Solomon, one of the original engineers at YouTube: …. The key takeaway away of the talk for me was doing a lot with really simple tools. While many teams are moving on to more complex ecosystems, YouTube really does keep it simple. They program primarily in Python, use MySQL as their database, they’ve stuck with Apache, and even new features for such a massive site start as a very simple Python program. That doesn’t mean YouTube doesn’t do cool stuff, they do, but what makes everything work together is more a philosophy or a way of doing things than technological hocus pocus. What made YouTube into one of the world’s largest websites? Read on and see... Stats @font-face { font-family: "Arial"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }div.Section1 { page: Section1; } 4 billion Views a day 60 hours of video is uploaded every minute 350+ million devices are YouTube enabled Revenue double in 2010 The number of videos has gone up 9 orders of magnitude and the number of developers has only gone up two orders of magnitude. 1 million lines of Python code Stack @font-face { font-family: "Arial"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }div.Section1 { page: Section1; } Python - most of the lines of code for YouTube are still in Python. Everytime you watch a YouTube video you are executing a bunch of Python code. Apache - when you think you need to get rid of it, you don’t. Apache is a real rockstar technology at YouTube because they keep it simple. Every request goes through Apache. Linux - the benefit of Linux is there’s always a way to get in and see how your system is behaving. No matter how bad your app is behaving, you can take a look at it with Linux tools like strace and tcpdump. MySQL - is used a lot. When you watch a video you are getting data from MySQL. Sometime it’s used a relational database or a blob store. It’s about tuning and making choices about how you organize your data. Vitess- a  new project released by YouTube, written in Go, it’s a frontend to MySQL. It does a lot of optimization on the fly, it rewrites queries and acts as a proxy. Currently it serves every YouTube database request. It’s RPC based. Zookeeper - a distributed lock server. It’s used for configuration. Really interesting piece of technology. Hard to use correctly so read the manual Wiseguy - a CGI servlet container. Spitfire - a templating system. It has an abstract syntax tree that let’s them do transformations to make things go faster. Serialization formats - no matter which one you use, they are all expensive. Measure. Don’t use pickle. Not a good choice. Found protocol buffers slow. They wrote their own BSON implementation, which is 10-15 time faster than the one you can download. ...Contiues. Read the blog Watch the video

  Read the article

< Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >