Search Results

Search found 55281 results on 2212 pages for 'get set'.

Page 131/2212 | < Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >

• Disabled FRS replication on a DFS link, but the targets still list the replica set in their FRS conf

  - by Graeme Donaldson

  It's been a while since I've had to deal with the wonders of FRS, so I'm doing some testing to refresh my memory. This is what I've done so far. I am stuck with FRS rather than DFS-R for the moment since not all of my link targets are running R2. Created a domain-based DFS root, hosted on 4 servers. Created a DFS link under the root, targeted at 2 servers. The shares on both servers were empty. Dropped about 500MB of data into the target folder on one server and waited for replication to complete. Added/removed/modified files on both targets and confirmed that changes are replicated within a few seconds. Deleted the contents of the target folder on 1 server and waited for the other server to replicate the deletion. All of this worked perfectly, so now I want to remove my DFS link since I only created it for testing purposes. This is where it gets weird. I'm pretty sure that in the past I've disabled replication on the DFS link and after a short amount of time each target would log an info event in the FRS event log, something along the lines of "this server is no longer a member of replica set X". I have waited about 3 hours and I haven't seen this happen. ntfrsutl ds tells me that the server is not a member of any set, which is expected because when I disable replication on the link, the AD attributes on the computer object are removed. The weird part is... ntfrsutl sets still shows me the replica set, with all the properties, etc. So it seems like the FRS-related attributes of the target server's AD object are gone, but the FRS service for some reason hasn't removed the replica set. Can anyone see what I have done wrong?

  Read the article

• How do i set up a fully featured small business network?

  - by JoshReedSchramm

  This has the possibility to be a very large question but I recently acquired a few rack mount servers and the hardware necessary to run them. Unfortunately I'm a programmer with very little understanding of how to set up a good working network so I'm hoping someone on here might be able to help. What I want to do is run a domain with a series of subdomains which would all be externally accessible. The setup would live inside my home and my internet connection is your run of the mill cable model (which means a dynamic IP) I want to be able to set up a couple site, specifically: www.mycompany.com (mycompany.com with no subdomain would redirect to this) build.mycompany.com (for my continuous integration server) ruby.mycompany.com (for ruby projects) win.mycompany.com (for windows project) etc. Additionally this is still my home network so our personal machines need to be able to get on via wifi with at least the same security we have now through an out of the box router from best buy. I'm thinking i need a DNS server, DHCP server and one of those would run either no-ip or dyndns to accommodate the dynamic ip. I don't necessarily need mail but it might be helpful to have some sort of mail server i could use for testing, it doesn't need to get out to the greater internet though. So how do i set up this kinda of network? tl;dr Need to know how to set up your standard office style network in my home off my normal consumer level cable modem connection.

  Read the article

• How to set the monitor to its native resolution when xrandr approach isn't working?

  - by Krishna Kant Sharma

  I am trying to setup my Samsung syncmaster B2030 monitor in ubuntu 12.04. It's native resolution is 1600x900 which I am not getting in ubuntu and which I am trying to get. I tried using xrandr approach provided in these urls: 1) http://www.ubuntugeek.com/how-change-display-resolution-settings-using-xrandr.html 2) How to set the monitor to its native resolution which is not listed in the resolutions list? S1) I used cvt 1600 900 60 to get the modeline. Output was: # 1600x900 59.95 Hz (CVT 1.44M9) hsync: 55.99 kHz; pclk: 118.25 MHz Modeline "1600x900_60.00" 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync S2) I then used xrandr and output was: Screen 0: minimum 8 x 8, current 1152 x 864, maximum 8192 x 8192 DVI-I-0 disconnected (normal left inverted right x axis y axis) VGA-0 connected 1152x864+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0 + 1360x768 60.0 59.8 1152x864 60.0* 800x600 72.2 60.3 56.2 680x384 119.9 119.6 640x480 59.9 512x384 120.0 400x300 144.4 320x240 120.1 DVI-I-1 disconnected (normal left inverted right x axis y axis) HDMI-0 disconnected (normal left inverted right x axis y axis) which gave me "VGA-0". S3) Then I used xrandr --newmode "1600x900_60.00" 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync But instead of adding the modeline it just threw an error: X Error of failed request: BadName (named color or font does not exist) Major opcode of failed request: 153 (RANDR) Minor opcode of failed request: 16 (RRCreateMode) Serial number of failed request: 29 Current serial number in output stream: 29 My system details: 1) ubuntu 12.04 LTS 2) Graphic card: GeForce 9400 GT/PCIe/SSE2 (driver is successfully installed. I am checking it in System Settings Details. And it's showing that driver is installed and its "GeForce 9400 GT/PCIe/SSE2") 3) Monitor: Samsung syncmaster B2030 4) Resolutions I am getting: 800x600 1024x768 1152x864 (I am currently using this one) 1360x768 (this one isn't working properly) Does anyone know what I can do? Thanks in advance. UPDATE (1): Today I tried it again. And adding a modeline (using --newmode) worked. But when I used --addmode by: xrandr --addmode VGA-0 1600x900_60.00 It gave this error: X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 153 (RANDR) Minor opcode of failed request: 18 (RRAddOutputMode) Serial number of failed request: 29 Current serial number in output stream: 30

  Read the article

• How can I set up Friendly URL to Nginx?

  - by MKK

  I'm trying to use dokuwiki with its Friendly URL on Nginx. The problem that I'm facing is, it doesn' show correct path to any link(even stylesheet, and images) on every page It looks that paths are missing wiki/ part. If I click on the image and show its destination, it shows this url http://foo-sample.com/lib/tpl/dokuwiki/images/logo.png But it has to be this below. http://foo-sample.com/wiki/lib/tpl/dokuwiki/images/logo.png and login URL is not working either. If I click on login link, it takes me to http://foo-sample.com/wiki/start?do=login&sectok=ff7d4a68936033ed398a8b82ac9 and it says 404 Not Found I took a look at this https://www.dokuwiki.org/rewrite#nginx and tried as much as possible. However it still doesn't work. Here's my conf files. How can I fix this problem? dokuwiki is set in /usr/share/wiki /etc/nginx/conf.d/rails.conf upstream sample { ip_hash; server unix:/var/run/unicorn/unicorn_foo-sample.sock fail_timeout=0; } server { listen 80; server_name foo-sample.com; root /var/www/html/foo-sample/public; location /wiki { alias /usr/share/wiki; index doku.php; } location ~ ^/wiki.+\.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index doku.php; fastcgi_split_path_info ^/wiki(.+\.php)(.*)$; fastcgi_param SCRIPT_FILENAME /usr/share/wiki$fastcgi_script_name; include /etc/nginx/fastcgi_params; } } /usr/share/wiki/.htaccess ## Enable this to restrict editing to logged in users only ## You should disable Indexes and MultiViews either here or in the ## global config. Symlinks maybe needed for URL rewriting. #Options -Indexes -MultiViews +FollowSymLinks ## make sure nobody gets the htaccess files <Files ~ "^[\._]ht"> Order allow,deny Deny from all Satisfy All </Files> # Uncomment these rules if you want to have nice URLs using # $conf['userewrite'] = 1 - not needed for rewrite mode 2 # Not all installations will require the following line. If you do, # change "/dokuwiki" to the path to your dokuwiki directory relative # to your document root. # If you enable DokuWikis XML-RPC interface, you should consider to # restrict access to it over HTTPS only! Uncomment the following two # rules if your server setup allows HTTPS. RewriteCond %{HTTPS} !=on RewriteRule ^lib/exe/xmlrpc.php$ https://%{SERVER_NAME}%{REQUEST_URI} [L,R=301] <IfModule mod_geoip.c> GeoIPEnable On Order deny,allow deny from all SetEnvIf GEOIP_COUNTRY_CODE JP AllowCountry Allow from .googlebot.com Allow from .yahoo.net Allow from .msn.com Allow from env=AllowCountry </IfModule>

  Read the article

• How to add another OS entry in Wubi grub

  - by Amey Jah

  I am trying to install another linux distro besides ubuntu. However, I want to retain my existing windows based loader. Currently, as per my knowledge, MsDos loads grub which then loads Ubuntu (with loop back trick). Now, I have a new linux distro installed on /dev/sda8 (/boot for new distro) where as /root for that OS is installed on /dev/sda9. I tried following steps 1. Add entry into 40_custom of ubuntu grub 2. update grub But upon booting via that entry, it is not able to load the new OS and shows me blank screen. What could be the problem? Additional data: grub.cfg file of ubuntu menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-fc296be2-8c59-4f21-a3f8-47c38cd0d537' { gfxmode $linux_gfx_mode insmod gzio insmod ntfs set root='hd0,msdos5' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 01CD7BB998DB0870 else search --no-floppy --fs-uuid --set=root 01CD7BB998DB0870 fi loopback loop0 /ubuntu/disks/root.disk set root=(loop0) linux /boot/vmlinuz-3.5.0-19-generic root=UUID=01CD7BB998DB0870 loop=/ubuntu/disks/root.disk ro quiet splash $vt_handoff initrd /boot/initrd.img-3.5.0-19-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-fc296be2-8c59-4f21-a3f8-47c38cd0d537' { menuentry 'Ubuntu, with Linux 3.5.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-19-generic-advanced-fc296be2-8c59-4f21-a3f8-47c38cd0d537' { gfxmode $linux_gfx_mode insmod gzio insmod ntfs set root='hd0,msdos5' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 01CD7BB998DB0870 else search --no-floppy --fs-uuid --set=root 01CD7BB998DB0870 fi loopback loop0 /ubuntu/disks/root.disk set root=(loop0) echo 'Loading Linux 3.5.0-19-generic ...' linux /boot/vmlinuz-3.5.0-19-generic root=UUID=01CD7BB998DB0870 loop=/ubuntu/disks/root.disk ro quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-19-generic } menuentry 'Ubuntu, with Linux 3.5.0-19-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-19-generic-recovery-fc296be2-8c59-4f21-a3f8-47c38cd0d537' { insmod gzio insmod ntfs set root='hd0,msdos5' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 01CD7BB998DB0870 else search --no-floppy --fs-uuid --set=root 01CD7BB998DB0870 fi loopback loop0 /ubuntu/disks/root.disk set root=(loop0) echo 'Loading Linux 3.5.0-19-generic ...' linux /boot/vmlinuz-3.5.0-19-generic root=UUID=01CD7BB998DB0870 loop=/ubuntu/disks/root.disk ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-19-generic } } ### END /etc/grub.d/10_lupin ### menuentry 'Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-0f490b6c-e92d-42f0-88e1-0bd3c0d27641'{ load_video set gfxpayload=keep insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos8' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos8 --hint-efi=hd0,msdos8 --hint-baremetal=ahci0,msdos8 0f490b6c-e92d-42f0-88e1-0bd3c0d27641 else search --no-floppy --fs-uuid --set=root 0f490b6c-e92d-42f0-88e1-0bd3c0d27641 fi echo 'Loading Linux core repo kernel ...' linux /boot/vmlinuz-linux root=UUID=0f490b6c-e92d-42f0-88e1-0bd3c0d27641 ro quiet echo 'Loading initial ramdisk ...' initrd /boot/initramfs-linux.img } menuentry 'Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-0f490b6c-e92d-42f0-88e1-0bd3c0d27641' { load_video set gfxpayload=keep insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos8' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos8 --hint-efi=hd0,msdos8 --hint-baremetal=ahci0,msdos8 0f490b6c-e92d-42f0-88e1-0bd3c0d27641 else search --no-floppy --fs-uuid --set=root 0f490b6c-e92d-42f0-88e1-0bd3c0d27641 fi echo 'Loading Linux core repo kernel ...' linux /boot/vmlinuz-linux root=UUID=0f490b6c-e92d-42f0-88e1-0bd3c0d27641 ro quiet echo 'Loading initial ramdisk ...' initrd /boot/initramfs-linux-fallback.img } lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 931.5G 0 disk +-sda1 8:1 0 39.2M 0 part +-sda2 8:2 0 19.8G 0 part +-sda3 8:3 0 205.1G 0 part +-sda4 8:4 0 1K 0 part +-sda5 8:5 0 333.7G 0 part /host +-sda6 8:6 0 233.4G 0 part +-sda7 8:7 0 100.4G 0 part +-sda8 8:8 0 100M 0 part +-sda9 8:9 0 14.7G 0 part +-sda10 8:10 0 21.4G 0 part +-sda11 8:11 0 3G 0 part sr0 11:0 1 1024M 0 rom loop0 7:0 0 29G 0 loop / blkid /dev/loop0: UUID="fc296be2-8c59-4f21-a3f8-47c38cd0d537" TYPE="ext4" /dev/sda1: SEC_TYPE="msdos" LABEL="DellUtility" UUID="5450-4444" TYPE="vfat" /dev/sda2: LABEL="RECOVERY" UUID="78C4FAC1C4FA80A4" TYPE="ntfs" /dev/sda3: LABEL="OS" UUID="DACEFCF1CEFCC6B3" TYPE="ntfs" /dev/sda5: UUID="01CD7BB998DB0870" TYPE="ntfs" /dev/sda6: UUID="01CD7BB99CA3F750" TYPE="ntfs" /dev/sda7: LABEL="Windows 8" UUID="01CDBFB52F925F40" TYPE="ntfs" /dev/sda8: UUID="cdbb5770-d29c-401d-850d-ee30a048ca5e" TYPE="ext2" /dev/sda9: UUID="0f490b6c-e92d-42f0-88e1-0bd3c0d27641" TYPE="ext2" /dev/sda10: UUID="2e7682e5-8917-4edc-9bf9-044fea2ad738" TYPE="ext2" /dev/sda11: UUID="6081da70-d622-42b9-b489-309f922b284e" TYPE="swap Any help is appreciated. Please let me know if you need any extra data.

  Read the article

• WOL doesn't work if set to anything other than `a` but this setting makes it boot all the time

  - by Elton Carvalho

  I manage a small "cluster" of 4 Xeon machines with Intel boards in my lab. They are all plugged to a 5-port 3-Com switch with static IP addresses like 10.0.0.x. They are all running OpenSuse 11.4 and their /home/ is served by one of the machines (node00) via NFS. They are plugged to an UPS that can keep them on for ca. 15 minutes, but there are lots of electric shortages due to "unscheduled maintenace" that are longer than this. So they end up being powered down without notice. If I set the BIOS to turn them on after power shortages, the issue is that they all boot at the same time and, if node00 decides to run fsck in the /home/ partition, it does not finish booting before the others try to NFS mount their /home/. I am trying to make wake on lan work, so I can choose to boot the NFS clients only after the server has successfully booted. The problem is that when I run ethtool I get an output like this: Supports Wake-on: pumbag Wake-on: g Theoretically, it is set to wake on MagicPacket(tm), according to the manual. But sending the WOL packet using wol -i 10.0.0.255 $MACADDR does not wake up the box after I shut it down with halt. The ethernet link led blinks after I send the packet, so it appears to be getting to the machine. However, if I set it up with ethtool -s eth1 wol bag, the machine always wakes up right after halting, even if I don't send the Magic packet. This means that the device can wake up with LAN activity, but seems to be ignoring the magic packet. Setting wol ag does not wake the box with the MagicPacket. Does setting wol a mean that it should boot with any broadcast message? How can I diagnose the issue of the machine not waking up with the MagicPacket even though I am sending it and it's set up to wake up with it? Thanks in advance!

  Read the article

• How do I configure Jetty (via jettyrunner) so that it names a character set in the Content-Type response header?

  - by Pointy

  I use Jetty (via the oh-so-handy Jetty Runner) for day-to-day web application testing. One thing I've recently stumbled on is the fact that I don't get a character set called out in the "Content-Type" response header all the time. I do get it in response to my application's XMLHttpRequest transactions, but not for plain old pages loaded by <a> links or whatever. I've read a little bit about how to set up a Jetty config file, but I've never been able to completely understand that; all servlet containers are complicated, and while Jetty is pretty simple it's just weird enough that I don't grok the overall idea. Thus, all I do to launch my app is to run the Jetty Runner .jar file with a couple of simple arguments to set up the port number and logfile path, and then I just give it the .war file to run. It works great — except for the missing character set :-) Anybody have a quick sample config file that might fix this? edit — oh if it matters, I'm running Jetty 7.0.0 RC3; I've also tried with a slightly newer version (still 7.something) with exactly the same issue. All my testing is on Ubuntu.

  Read the article

• can we set up cron jobs in Google App Engine without using SDK???

  - by nok

  I downloaded java SDK from Google App Engine. I tried running appcfg.cmd from command prompt. But it gives this error. Error opening registry key 'Software\JavaSoft\Java Runtime Environment' Error: could not find java.dll Error: could not find Java 2 Runtime Environment. All i want to do with Google App Engine is to set up cron jobs with 1 minute frequency. I don't want to make any application in Google App Engine. I just want the cron job set up. Is there any way to set up cron job in Google App Engine without using the java SDK ???

  Read the article

• I will need a formula showing counts, totals and sub-totals for data set from different sheet

  - by Sapthagiri

  I am using MS2003 EXCEL. I have a cell in Sheet 1 with a color value and totals, with sub-totals. On sheet 2, I have a data set with 3 columns (colors, dress, type). On Sheet 1, I will need a tabulation showing Totals for Colors, with totals at sub-group of dress (shirt,pants) split by type totals (Full, Half, Tee) Below table represents my Data set in Sheet 2 Colors Make Dress Type -------------------------------- Red Arrow shirt full Red Levi shirt half blue Rugger Pant full yellow Wrangler shirt tee yellow Rugger Pant half yellow Arrow shirt tee yellow Wrangler Pant half Green Rugger Pant full Red Levi shirt tee blue Rugger Pant full blue Arrow shirt full blue Wrangler Pant half Green Levi shirt full I will need a formula showing counts, totals and sub-totals on Sheet 1 for data set from Sheet 2. Refer my table below which represent my expected data on Sheet 1, total Shirt Full Half Tees Pants Full Shorts Red 10 8 4 3 1 2 1 1 Blue Green Yellow Please note I am not looking for a Pivot table solution.

  Read the article

• Can Remote Desktop be set up to use IPv6?

  - by Garrett

  I have both a Windows 7 Ultimate and a Windows XP Professional machine set up on my home network. I would like to be able to access them from school. Port forwarding is not currently an option (long story). Is there a way to set it so that I can RDP (yes it has to be RDP not something like TeamViewer or LogMeIn) over IPv6, possibly using Teredo? I have tried but I can't seem to get it working. Also I cannot ping these machines' IPv6 addresses. How can I get this set up?

  Read the article

• Use xrandr to set the absolute position of the screen?

  - by Eli

  I am running XFCE on Fedora 15. I use xrandr to set the secondary display (HDMI-0) to be to the right of the primary (DVI-0), however it is always at the top-right. Is it possible to set the absolute position of the display (e.g. DVI-0 at 0,0 and HDMI-0 at 1920,56), or even set the display to be at the bottom-right? I cannot modify the Xorg.conf, which would be the easy way, as that would mean generating an Xorg.conf file (there is none right now), and I do not know of any automated tool to do that (other than the fglrx driver). The reason why I need this is because I want to extend the XFCE panel accross both monitors, but with there being a 56-pixel-wide dead zone at the bottom I cannot do this.

  Read the article

• How does one check whether the OS X "disabled" flag for launchd services is set?

  - by Charles Duffy

  According to the man page for launchctl (emphasis mine):    -w   Overrides the Disabled key and sets it to false. In previous versions, this option would modify the configuration file. Now the state of the Disabled key is stored elsewhere on-disk. Because the current state of the disabled flag is no longer set in the .plist file itself, checking for the Disabled key is no longer an accurate way to tell if the service will run on next boot. Where is this "elsewhere on-disk"? More to the point (and more importantly), how does one check whether this flag is set? Also, is it possible to set a service to run on next boot without forcing it to start immediately (as with launchctl load -w /Library/LaunchDaemons/my-service.plist)?

  Read the article

• How do I set up different configurations on an Ubuntu laptop based on different physical locations?

  - by Andrew Larned

  I'm looking for a way to have a couple (or three) multiple configurations set up on my laptop, and easily switch between them. To be more specific, when my laptop is at work, it's plugged into a second monitor, and has a specific set of networks configurations. At home, the second monitor is gone, the network configurations are different. At a public wireless point there are other configurations to set, etc. I know I can go into my preferences and turn on/turn off the monitor, and mess with the networking preferences, and so on, but I'm looking for a way to change a bunch of preferences all at once, and if it's possible to do that automatically, maybe based on the wireless APs in the vicinity, that would be even better.

  Read the article

• How do I set up a one way trust when some DCs are firewalled off from each other?

  - by makerofthings7

  I have two Windows 2008 forests in Win2003 mode and I need to set up a one way trust between them. The validation button in Domains And Trusts works in one forest but not in the other. I think this is because not all DCs can see all the other DCs. I'm not sure if I need to set up the hosts file, so I did so with company.com in the respective domain along with the relevant DC. (do I need _msdcs _tcp zones etc) How do I set up a one way trust when some DCs are firewalled off from each other?

  Read the article

• How do I network this Windows Failover Cluster and MongoDB Replica Set? (diagram inside)

  - by arex1337

  As you can see, my two Windows Server Failover Cluster (WSFC) nodes have three network interfaces each, which connects them to three different networks : A public network A private network consisting of the WSFC nodes A private network consisting of the WSFC nodes and a machine with the WSFC Quorum Witness File Share Does this network configuration I've planned, make sense? Do I have the "right" number of NICs and networks? I'm thinking the 2nd NIC/network may be unnecessary. My two MongoDB Replica Set nodes also have three network interfaces each - very similar to the previous situation: A public network A private network consisting of the primary and secondary MongoDB Replica Set nodes A private network consisting of the primary, secondary and arbiter MongoDB Replica Set nodes Does this network configuration, make sense? Do I have the "right" number of NICs and networks? I'm thinking the 2nd NIC/network may be unnecessary. Here is the simpler version I'm considering: UPDATE:

  Read the article

• Why does diskpart set the volume attributes on all volumes?

  - by Nick

  I was trying to migrate a Win7 OS from a HDD to a SSD. I've created 2 partition with 1024KB offset, with diskpart: 100MB System Reserved and a 60GB for C:. I've cloned their contents using Easeus Disk Copy. I've loaded the Windows 7 Boot DVD, and wanted to use diskpart to drop the letter for the System Reserved partition and make it hidden. select volume 0 detail volume attribute volume set nodefaultdriveletter attribute volume set hidden These 2 attribute set commands actioned on both volumes (0 and 1, MSR and C:) instead of the selected one, and viceversa. I've tried to clear these attributes from volume 1, but it cleared them also from volume 0. Why does DiskPart have this behaviour?

  Read the article

• How to set file associations and explorer options in one go?

  - by jokoon

  This has been itching me for quite a long time. When I come on a new computer with any version of Windows, I need to: un-hide file extensions set explorer default view to list instead of icons set the file extensions like h c cpp so they don't open Visual C++ (which can take up to 20 seconds!) each time I double click on them, opening them with something like Notepad++ instead. Isn't there some program to quickly set thoses options to something I want, like some standalone exe, or some generic registry file I can execute when I come on a new machine? I'm a developer and I can't believe I'm wasting so much time on those &*$%@# things.

  Read the article

• How to set the network profile of Windows 7 via group policy?

  - by Ricket

  We are deploying client computers and in testing noticed that the first time the user logs into the computer, it asks them if the location is a home, work, or public location. We are worried that some users in our workplace might misread it (or not read it at all) and click Public, thus likely denying our access to the computer and messing up security settings and such. Can we set our network to be a "Work Network" location via group policy or some other mechanism of our Windows Domain so that the user is not prompted when connected to our network? Also these are laptops, so we don't want every network they connect to be set as work network, and we have several access points (wired and three wireless) which our users often switch between so I'm not yet sure if it reprompts with each access point but I have the feeling it will, and I would like all of these to be set to the Work profile type.

  Read the article

• What happens when router has been set to incorrect time?

  - by iamrohitbanga

  I have a D-Link router for my home Wi-Fi network. Everyday at least once the internet suddenly goes down. I am simply not able to connect to the Wi-Fi network. If I just restart the router, it starts working. To debug the issue I logged into the admin panel and noticed the time was set to something in 2002. I have set it to the correct time. Will wait to see if that fixes the problem. In the meanwhile I want to know what can go bad when the router has been set to show an incorrect time? What are the kinds of problems expected? My Wi-Fi was working just fine most of the time, but sometimes it lost the connection. Could this be linked to the incorrect time setting?

  Read the article

• How to set up Nginx as a caching reverse proxy?

  - by Continuation

  I heard recently that Nginx has added caching to its reverse proxy feature. I looked around but couldn't find much info about it. I want to set up Nginx as a caching reverse proxy in front of Apache/Django: to have Nginx proxy requests for some (but not all) dynamic pages to Apache, then cache the generated pages and serve subsequent requests for those pages from cache. Ideally I'd want to invalidate cache in 2 ways: Set an expiration date on the cached item To explicitly invalidate the cached item. E.g. if my Django backend has updated certain data, I'd want to tell Nginx to invalidate the cache of the affected pages Is it possible to set Nginx to do that? How?

  Read the article

• How can I set a network connection as metered?

  - by Sam

  I would like to set a network connection as metered. I can't find how to do this; it seems to have changed in the upgrade from Windows 8 to 8.1. I tried following the steps in the official metered connection FAQ. However, when I open the connection, there is no Data Usage heading nor a Set as a metered connection option. I tried this on two different computers, both running Windows 8.1. I also tried doing this for both wireless and ethernet adaptors. Here's what the connection screen looks like. I've cropped the empty space from the image. How can I set the connection to metered?

  Read the article

• How do I set my main monitor to a higher resolution?

  - by Sean

  My laptop monitor's native resolution is 1280x800 and it just isnt big enough for me. I tried to set the resolution higher, but my graphics card only showed options upto 1280x800, and I figured that was the max res my card would allow. I found a monitor out on the street a few days ago and its native resolution is 1024x768. I have been playing around with it a bit. I was looking under the resolutions for it, and I can set it upto 1400x1050, so apparently my card allows for more than 1280x800, so why can't I set my laptop monitor to higher?

  Read the article

• How do I set up my home server to go directly to a port other than 80

  - by Kevin

  I'm using dyndns, a lynksis wt54g router, and tomcat 7 with spring to set up a web server. This is my first time to attempt this. I'm sure this is a very common question, but I don't know enough to find the answer after quite a bit searching. Dyndns is successfully forwarding to my ip. The main problem is, the router admin login is coming up when my url is used. I'm hosting my site on port 8080. I have port forwarding set up for port 8080 but my request times out when I attempt to use my url like this www.myurl1234.com:8080. I don't want users to have to type the port anyway. I also tried changing the management port to 82 and hosting on port 80, but I still get the router admin login when I use my url. Where am I going wrong? Can I set it up so that www.myurl1234.com goes straight to port 8080?

  Read the article

• What''s the "earliest" place one can set an environment variable during Linux boot process?

  - by amn

  I know I can set a variable in a shell startup file, but the thing is, I am trying to set up a POSIX-compatible environment, and a POSIX shell does not parse any startup files other than the one specified by the environment variable ENV. This presents a problem - currently my login starts the shell as bash, which I will try to replace with sh so Bash runs as POSIX shell - however then it will not parse the default startup files and I need ENV set to specify these. Which means as far as I understand that I need to specify ENV before login starts the shell, correct? Now, how would I do that? I hope my question is clear, if not I will gladly redact it.

  Read the article

• How to set up Nginx as a caching reverse proxy?

  - by Continuation

  I heard recently that Nginx has added caching to its reverse proxy feature. I looked around but couldn't find much info about it. I want to set up Nginx as a caching reverse proxy in front of Apache/Django: to have Nginx proxy requests for some (but not all) dynamic pages to Apache, then cache the generated pages and serve subsequent requests for those pages from cache. Ideally I'd want to invalidate cache in 2 ways: Set an expiration date on the cached item To explicitly invalidate the cached item. E.g. if my Django backend has updated certain data, I'd want to tell Nginx to invalidate the cache of the affected pages Is it possible to set Nginx to do that? How?

  Read the article

< Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >