Search Results

Search found 15977 results on 640 pages for 'home dir'.

Page 131/640 | < Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >

• Where to install JDBC drivers in Hyperic Server

  - by Svish

  I have installed Hyperic Server 4.4.0 and I want to use an SQL plugin that connects to an Oracle database. To make this work on the Agent i had to download a JDBC driver for Oracle and put it in [agent-dir]/bundles/[bundle-dir]/pdk/lib. I can now run my plugin on the agent using java -jar hq-products.jar .... Now I want to add it so that it shows up in the server hq. I put the plugin in the appropriate directory and I can add it as a platform service. However, when i try to configure the plugin I get the following error: No suitable driver found for jdbc:oracle:thin:@blah.blah:blah:blah This is the same error I got on the client before I added the Oracle JDBC driver, so I assume that's the problem here too. But where do I put the JDBC drivers on the server?

  Read the article

• mount error 5 = Input/output error

  - by alharaka

  I am running out of ideas. After a long period of testing this morning, I cannot seem to get this to work, and I have no idea why. I want to mount a Windows SMB/CIFS share with a Debian 5.0.4 VM, and it is not cooperating. This the command I am using. debianvm:/home/me# whoami root debianvm:/home/me# smbclient --version Version 3.2.5 debianvm:/home/me# mount -t cifs //hostname.domain.tld/share /mnt/hostname.domain.tld/share --verbose -o user=SUBADDOMAIN.ADDOMAIN.DOMAIN.TLD/username mount.cifs kernel mount options: unc=//hostname.domain.tld\share,ip=10.212.15.53,domain=SUBADDOMAIN.ADDOMAIN.DOMAIN.TLD,ver=1,rw,user=username,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,pass=*********mount error 5 = Input/output error Refer to the mount.cifs(8) manual page (e.g.man mount.cifs) debianvm:/home/me# The word on the nets has not been very specific, and unfortunately it is almost always environment-specific. I receive no authentication errors. I have tried mount -t smbfs and mount -t cifs, along with smbmount and such. I get the same error before. I doubt it is a problem with DNS resolution, because logging shows the correct IP address. dmesg | tail -f no longer shows authentication errors when I format the domain and username accordingly. I have played a little with iocharset=utf8, file_mode, and dir_mode as described here. That did not help either. I have also tried ntlm and ntlmv2 assuming it might be a minimum auth method problem, but not forcing sec=ntlmv2 it can still authenticate without errors anymore. smbclient -L hostname.domain.tld -W SUBADDOMAIN.ADDOMAIN.DOMAIN.TLD -U username correctly lists all the shares and shows it as the following. Domain=[SUBADDOMAIN] OS=[Windows 5.0] Server=[Windows 2000 LAN Manager] Sharename Type Comment --------- ---- ------- IPC$ IPC Remote IPC ETC$ Disk Remote Administration C$ Disk Remote Administration Share Disk Connection to hostname.domain.tld failed (Error NT_STATUS_CONNECTION_REFUSED) NetBIOS over TCP disabled -- no workgroup available I find the last line intriguing/alarming. Does anyone have any pointers!? Maybe I misread the effin manual.

  Read the article

• Missing MB on a GPT partioned SSD

  - by pisswillis

  I recently installed Arch Linux on an Intel 40GB SSD. I used GPT for partioning (via GNU parted) and created the following partions: /dev/sda1 : 1 MB, no FS, flag=bios_grub /dev/sda2 : 30MB, /boot, ext2, flag=boot /dev/sda3 : 20GB, /home, ext4 /dev/sda4 : ~20GB, /, ext4 After struggling to install grub2 from the livecd environment (which I finally did via grub-install /dev/sda --root-directory=/mnt/ --no-floppy --force) I got a working system. However, when I was inspecting disk usage with df I noticed that my home partition had around 170MB of used space on it. This surprised me because the only things on /home were one users .bashrc, .bash_history, and .lesshst. du confirmed that there was only a few KB of space being used on /home. Why does df report approximately 170MB being used when du does not? Is this space "gone forever", or can I regain it by repartioning and/or reinstalling? When I installed grub2 it said something along the lines of "your embed area is too small", and that I could "use BLOCKLISTS, but BLOCKLISTS are UNRELIABLE". In the end the only way I could get a system booting from the SSD was to use blocklists via the grub-install --force flag. Is this related to the mysterious missing 170MB? Thanks

  Read the article

• How to stop basic Postfix after-queue script from BCC-ing sender?

  - by mjbraun

  I'm building a content filter for Postfix (2.9.3 package installed via apt on an Ubuntu 12.04 test VM) and I'm starting with a very basic Ruby (1.9.3) template and building up functionality. Strangely, when the script is enabled, messages sent are being forwarded on as normal, but also sent back to the sender which is not normal. Disabling the script disables this behavior. Any suggestions about what I have to change to stop that from happening? Thanks for any advice! /etc/postfix/master.cf (only the lines changed from the default) smtp inet n - - - - smtpd -o content_filter=dumper:dummy ... dumper unix - n n - 10 pipe flags=RF user=mailuser argv=/home/mailuser/mailfilter/dumper.rb ${sender} ${recipient}` /home/mailuser/mailfilter/dumper.rb #!/usr/bin/env ruby require 'open3' dir="/home/mailuser/emails" logfile="maillog.log" message = $stdin.read cmd = "/usr/sbin/sendmail -G -i #{ARGV[0]} #{ARGV[1]}" stdin, stdouterr, wait_thr = Open3.popen2e(cmd) stdin.print(message) logfile = File.open("#{dir}/#{logfile}", 'a') logfile.write(stdouterr) stdin.close stdouterr.close exit(0)

  Read the article

• OpenSSH SFTP server with chroot() + File Permissions

  - by HannesFostie

  I am currently setting up an SFTP server but there is one detail I can't seem to figure out. When I add a user, I would like him to connect using his client and be able to write in his "root dir" right away. My Match case for the SFTP-users group currently has ChrootDirectory set as "/home/%u", and inside that directory I have to have a subdirectory owned by the user, while /home/%u itself is owned by root. Next to that, the "root dir" also has a couple files, .bashrc to name one. Is it possible to put these files somewhere else, remove them, or at least make them invisible to the user? Thanks EDIT: One more little thing I'd like to implement is for one account to have read (or rw, not sure yet) access to all other users' home directories. What is the easiest way to implement this?

  Read the article

• Win7 OpenSSH config: no address associated with name

  - by Jonah

  I am using OpenSSH on win7. My home dir is C:\Users\JG, and inside that dir I have the file C:\Users\JG\.ssh\config, with these contents: Host <redacted server ip here> HostName digitalocean_git User git IdentityFile ~/.ssh/digitalocean_moocho/id_rsa The id file pointed to by the "IdentityFile" entry works, as I use it just fine via putty, but for this problem I am trying to get command line OpenSSH working. The crux of the problem is explained by this output: >ssh -v digitalocean_git OpenSSH_4.6p1, OpenSSL 0.9.8e 23 Feb 2007 debug1: Reading configuration data /c/Users/JG/.ssh/config ssh: digitalocean_git: no address associated with name Why is no address associated with the name? How can I make this work?

  Read the article

• Postfix cannot deliver mail to Cyrus mailbox on Ubuntu 11.10 server

  - by user105804

  I have installed and configured Postfix and Cyrus IMAP server with webcyradm according to this document - http://www.delouw.ch/linux/Postfix-Cyrus-Web-cyradm-HOWTO/html/index.html . I can access webcyradm interface, I can create new domains and new users, and I can login via IMAP after creating the user account. However, Postfix fails to deliver mail to cyrus mailboxes. Mail log contains errors shown below. Installing any IMAP server other than cyrus is not an option because it is needed by the web application. Please advise me how to make Postfix deliver email to cyrus mailboxes. The solution should not necessary include web-cyradm, but there should be a web interface for managing mail domains and mailboxes as user-friendly as possible. Dec 30 22:46:17 acer-tower cyrus/lmtpunix[4865]: accepted connection Dec 30 22:46:17 acer-tower cyrus/lmtpunix[4865]: lmtp connection preauth'd as postman Dec 30 22:46:17 acer-tower postfix/cleanup[4868]: 065D5240035: message-id=<[email protected]> Dec 30 22:46:17 acer-tower cyrus/lmtpunix[4865]: verify_user(user.imap0001) failed: Mailbox does not exist Dec 30 22:46:17 acer-tower postfix/bounce[4867]: 6C6CA24185C: sender non-delivery notification: 065D5240035 Dec 30 22:46:17 acer-tower postfix/qmgr[4833]: 065D5240035: from=<>, size=3372, nrcpt=1 (queue active) Dec 30 22:46:17 acer-tower postfix/qmgr[4833]: 6C6CA24185C: removed Dec 30 22:46:17 acer-tower postfix/lmtp[4866]: 53421240372: to=<[email protected]>, orig_to=<[email protected]>, relay=home.webshop-software.ch[/tmp/lmtp], delay=165, delays=165/0.02/0.17/0.09, dsn=5.1.1, status=bounced (host home.webshop-software.ch[/tmp/lmtp] said: 550-Mailbox unknown. Either there is no mailbox associated with this 550-name or you do not have authorization to see it. 550 5.1.1 User unknown (in reply to RCPT TO command))

  Read the article

• URI Scheme, launch program in its directory

  - by ZaKlaus

  I have registered URI scheme for my app. When I open it with "Run.." or in browser, it runs in hosted directory. For ex. Ive opened url in webpage, program's working dir is in browser. What I want? I want to run program test.exe located at C:\data\test.exe and to use dir. C:\data so it could use other data in relative path. so test.exe would access file .\file.txt without using absolute path Hope I wrote it understandable, sorry for bad English.

  Read the article

• Router which can modify TTL

  - by TheMouse

  My ISP has set up the TTL to 1. My current router Linksys WRT120N can't change this and my computers don't have connection to Internet. I will return my current router and take another. I have some options: D-Link DIR-615 D-Link DIR-320 Linksys WRT54G2 Linksys WRT54GL Is the last router the only fix (among these routers) to my problem? ( I have to buy the router from this shop: http://laptop.bg/#/accessories/routers/ .. the site is in Bulgarian but at least the models which I can choose from are there in English.)

  Read the article

• site to listen on port 88

  - by JohnMerlino

  I want to get one of my sites to listen on port 88. In ports.conf in /etc/apache2 on ubuntu server, I add so web app can listen on port 88: NameVirtualHost *:80 Listen 80 NameVirtualHost *:88 Listen 88 I have this in my etc/apache2/apache2.conf, I have this: # Include the virtual host configurations: Include sites-enabled/ Under sites enabled, I have a file looks like this: Listen *:88 NameVirtualHost *:88 <VirtualHost *:88> ServerName dogtracking.com DocumentRoot /home/doggps/public_html/eaglegps.com/current/public <Directory /home/doggps/public_html/eaglegps.com/current/public> AllowOverride all Options -MultiViews </Directory> <LocationMatch "^/assets/.*$"> Header unset ETag FileETag None # RFC says only cache for 1 year ExpiresActive On ExpiresDefault "access plus 1 year" </LocationMatch> </VirtualHost> Then I try to restart apache: /etc/init.d/apache2 restart And I get: * Restarting web server apache2 /usr/sbin/apache2ctl: line 87: ulimit: open files: cannot modify limit: Operation not permitted Warning: DocumentRoot [/home/xtreme/Sites/DogGPS-CMS] does not exist apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [Thu Oct 18 18:04:21 2012] [warn] NameVirtualHost *:88 has no VirtualHosts /usr/sbin/apache2ctl: line 87: ulimit: open files: cannot modify limit: Operation not permitted Warning: DocumentRoot [/home/xtreme/Sites/DogGPS-CMS] does not exist apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [Thu Oct 18 18:04:22 2012] [warn] NameVirtualHost *:88 has no VirtualHosts (13)Permission denied: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs Action 'start' failed.

  Read the article

• Django apache + mod_wsgi with virtualenv

  - by ArgsKwargs

  I have some questions running multiple Django sites on a VPS I have a server that uses openPanel to automatically create VirtualHosts within apache2. My ideal situation is that I would have multiple virtualenvs with different dependencies installed so the python dist-packages directory isn't contaminated for different Django sites. For example: /home/user/virtualenv1 /home/user/virtualenv2 My django applications reside at /var/www, so For example: /var/www/djangosite1 /var/www/djangosite2 Now I've read upon openPanel docs and figured out the best thing todo is create a django.conf file inside the mydomain.com.inc folder, which looks something like: /etc/apache2/openpanel.d/mydomain.com.inc/django.conf DocumentRoot /var/www/djangosite1/project WSGIScriptAlias / /var/www/djangosite1/project/wsgi.py WSGIDaemonProcess mydomain python-path=/home/user/virtualenv1/lib/python2.6/site-packages <Directory /var/www/djangosite1/project> Order allow,deny Allow from all </Directory> Alias /static /var/www/djangosite1/project/static-root Now my problem is that this setup seems unable to find the virtualenv site-packages thus not recognizing any dependencies available in the given virtualenv Also, commenting out this line doesn't seem to break or change a thing: WSGIDaemonProcess mydomain python-path=/home/user/virtualenv1/lib/python2.6/site-packages For example: > service apache2 start ImportError: No module named South When I install South outside the virtualenv everything works

  Read the article

• Trouble with nginx and serving from multiple directories under the same domain

  - by Phase

  I have nginx setup to serve from /usr/share/nginx/html, and it does this fine. I also want to add it to serve from /home/user/public_html/map on the same domain. So: my.domain.com would get you the files in /usr/share/nginx/html my.domain.com/map would get you the files in /home/user/public_html/map With the below configuration (/etc/nginx/nginx.conf) it appears to be going to my.domain.com/map/map as noticed by this: 2011/03/12 09:50:26 [error] 2626#0: *254 "/home/user/public_html/map/map/index.html" is forbidden (13: Permission denied), client: <edited ip address>, server: _, request: "GET /map/ HTTP/1.1", host: "<edited>" I've tried a few things but I'm still not able to get it to cooperate, so any help would be greatly appreciated. ####################################################################### # # This is the main Nginx configuration file. # ####################################################################### #---------------------------------------------------------------------- # Main Module - directives that cover basic functionality #---------------------------------------------------------------------- user nginx; worker_processes 1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; #---------------------------------------------------------------------- # Events Module #---------------------------------------------------------------------- events { worker_connections 1024; } #---------------------------------------------------------------------- # HTTP Core Module #---------------------------------------------------------------------- http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; keepalive_timeout 65; server { listen 80; server_name _; #access_log logs/host.access.log main; location / { root /usr/share/nginx/html; index index.html index.htm; } location /map { root /home/user/public_html/map; index index.html index.htm; } error_page 404 /404.html; location = /404.html { root /usr/share/nginx/html; } error_page 500 502 503 504 /50x.html; location = /50x.html { root /usr/share/nginx/html; } } include /etc/nginx/conf.d/*.conf; }

  Read the article

• Warning in Apache log: Cannot get media type from 'x-mapp-php5'

  - by IronGoofy

  I have no idea what is causing this issue, but it seems to be related to the displayed file (just a simple index.php to print phpinfo) being in an aliased directory. Any suggestions what I can do to avoid the warning? Here's an excerpt from my httpd.conf: <Directory "<dir with broken php>"> Options Indexes FollowSymLinks ExecCGI Includes AllowOverride All Order allow,deny Allow from all </Directory> Alias /smartersoftware/ "<broken dir>" <FilesMatch \.php$> SetHandler application/x-httpd-php </FilesMatch> The last three lines were required to make php work at all (which I found a bit strange, and it may or may not be related to my problem). Adding a AddType application/x-mapp-php5 .php didn't change anything.

  Read the article

• SubDomain creation issue.Ubuntu 12.04 Apache 2.22 Webmin

  - by anarchos78

  I have a technical question concerning subdomains. My installation is UBUNTU 12.04 and WEBMIN for administration (using Apache web server). I am trying to create a subdomain to one IP (the domain is www.ithemis.gr and I want to create test.ithemis.gr and/or test1.ithemis.gr) with no success. I think I've tried the right way to set subdomains. The address does not resolving (I have already created DNS records via BIND). Do you have any suggestions? I am very new in server administration. Any help will be greatly appreciated! Apache configuration: In /etc/apache2/sites-available: Conf file:www.ithemis.gr.conf (main website) <VirtualHost 184.171.255.110:80> DocumentRoot /home/ithemis.gr ServerName www.ithemis.gr <Directory "/home/ithemis.gr"> allow from all #Options +Indexes Options +Includes -Indexes </Directory> </VirtualHost> Conf file:www.test.ithemis.gr.conf (subdomain website): <VirtualHost *:80> DocumentRoot /home/test.ithemis.gr ServerName test.ithemis.gr <Directory "/home/test.ithemis.gr"> allow from all Options +Indexes </Directory> </VirtualHost> My DNS records: Master Zone: ithemis.gr Name Type TTL Values ithemis.gr. NS Default ns1.themis.gr. ithemis.gr. A Default 184.171.255.110 ns1.ithemis.gr. A Default 184.171.255.110 ns2.ithemis.gr. A Default 184.171.255.110 mail.ithemis.gr. A Default 184.171.255.110 www.ithemis.gr. CNAME Default ithemis.gr. ithemis.gr. MX Default 5 mail.ithemis.gr. www.test.ithemis.gr. CNAME Default ithemis.gr. test.ithemis.gr. CNAME Default ithemis.gr.

  Read the article

• Sparc Solaris 2.6 will not boot

  - by joshxdr

  I have a very old Sparc Solaris network that was working fine last week, but after a power outage none of the workstations will boot. The network looks like this: host A: solaris 2.6, shares /export/home to network by NFS host B: solaris 8, runs NIS server. Mounts /export/home/ by NFS. host C: RHEL5, shares /share to network by NFS. Mounts /export/home/ by NFS. I figured that the main problem was host A, since you need the home directories available for the other workstations to boot(?). Host A does not mount anything by NFS as far as I know. However, this workstation will NOT boot. The OBP bootup sequence looks like this: Boot device <blah> configuring network interface le0 Hostname <hostname> check file system <everything ok> check ufs filesystem <everything ok> NIS domainname is <name> starting router discovery starting rpc services: rpcbind keyserv ypbind done setting default interface for multicast: add net 224.0.0.0: gateway <hostname> <HANGS at this point> Is there some kind of debug mode so that I can get more detail as to why the workstation won't boot? Is my network structure inherently susceptible to power outage? Is there a way I can boot up to command line so I can at least turn off the NFS mounting?

  Read the article

• Nginx configuration leads to endless redirect loop

  - by brianthecoder

  So I've looked at every sample configuration I could find and yet every time I try and view a page that requires ssl, I end up in an redirect loop. I'm running nginx/0.8.53 and passenger 3.0.2. Here's the ssl config server { listen 443 default ssl; server_name <redacted>.com www.<redacted>.com; root /home/app/<redacted>/public; passenger_enabled on; rails_env production; ssl_certificate /home/app/ssl/<redacted>.com.pem; ssl_certificate_key /home/app/ssl/<redacted>.key; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X_FORWARDED_PROTO https; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_set_header X-Url-Scheme $scheme; proxy_redirect off; proxy_max_temp_file_size 0; location /blog { rewrite ^/blog(/.*)?$ http://blog.<redacted>.com/$1 permanent; } location ~* \.(js|css|jpg|jpeg|gif|png)$ { if (-f $request_filename) { expires max; break; } } error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } } Here's the non-ssl config server { listen 80; server_name <redacted>.com www.<redacted>.com; root /home/app/<redacted>/public; passenger_enabled on; rails_env production; location /blog { rewrite ^/blog(/.*)?$ http://blog.<redacted>.com/$1 permanent; } location ~* \.(js|css|jpg|jpeg|gif|png)$ { if (-f $request_filename) { expires max; break; } } error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } } Let me know if there's any additional info I can give to help diagnose the issue.

  Read the article

• Set up Linux box as WAP for MyBookLive?

  - by AcidFlask

  I inherited an old Linux box as well as a MyBookLive and would like to make the MyBookLive available over my wireless, essentially using the Linux box as a wireless access point. I just wiped the Linux box (home) and installed Ubuntu 12.04 on it. My network setup currently looks like this: (192.168.0.1 netmask 255.255.255.0) ISP --- wireless router --- wlan0 on home (192.168.0.12) | eth0 on home --- MyBookLive MacBook (192.168.0.11) so that the MyBookLive is basically a glorified external hard drive. The router does have an Ethernet port, but it is being used by my roommate's computer so I can't plug the MyBookLive directly into it. Right now I can ping MyBookLive.local and MacBook.local from home, but I am having trouble understanding and figuring out what the correct iptables commands are to make my MacBook see my MyBookLive through the Bonjour network. Also, I'm not sure if I need to set up DNS to forward xxx.local Bonjour/Zeroconf addresses. I tried the following to forward my entire wired network (which has only my MyBookLive) to a single IP address: sysctl net.ipv4.ip_forward=1 iptables -A FORWARD -i wlan0 -o eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o wlan0 -j ACCEPT iptables -t nat -A PREROUTING -i eth0 -p tcp -j DNAT --to 192.168.0.66 iptables -t nat -A PREROUTING -i eth0 -p udp -j DNAT --to 192.168.0.66 but I can't ping this address from my MacBook. This is probably horribly wrong, but I am a complete noob at setting up this kind of network and could use some expert help with setting this up properly.

  Read the article

• How to force rsync to use destination directory as root

  - by thepurplepixel

  I have a simple script to one-way-sync files/folders within a directory: #!/bin/bash HOST='<hostname>' USER='<username>' DIR='/downloads/' SOURCE='/srv/torrents' rsync -e "ssh -l $USER" --remove-source-files -h -4 -r --stats --progress -i $SOURCE $HOST:$DIR find $SOURCE -type d -empty -prune -exec rmdir -p \{\} \; However, when this rsync operation runs, it creates a folder, torrents in /downloads on the destination machine. How can I force rsync to put all folders & files from /srv/torrents (remote) into /downloads/ (local) instead of creating /downloads/torrents as a separate directory?

  Read the article

• Creating multiple SFTP users for one account

  - by Tom Marthenal

  I'm in the process of migrating an aging shared-hosting system to more modern technologies. Right now, plain old insecure FTP is the only way for customers to access their files. I plan on replacing this with SFTP, but I need a way to create multiple SFTP users that correspond to one UNIX account. A customer has one account on the machine (e.g. customer) with a home directory like /home/customer/. Our clients are used to being able to create an arbitrary number of FTP accounts for their domains (to give out to different people). We need the same capability with SFTP. My first thought is to use SSH keys and just add each new "user" to authorized_keys, but this is confusing for our customers, many of whom are not technically-inclined and would prefer to stick with passwords. SSH is not an issue, only SFTP is available. How can we create multiple SFTP accounts (customer, customer_developer1, customer_developer2, etc.) that all function as equivalents and don't interfere with file permissions (ideally, all files should retain customer as their owner)? My initial thought was some kind of PAM module, but I don't have a clear idea of how to accomplish this within our constraints. We are open to using an alternative SSH daemon if OpenSSH isn't suitable for our situation; again, it needs to support only SFTP and not SSH. Currently our SSH configuration has this appended to it in order to jail the users in their own directories: # all customers have group 'customer' Match group customer ChrootDirectory /home/%u # jail in home directories AllowTcpForwarding no X11Forwarding no ForceCommand internal-sftp # force SFTP PasswordAuthentication yes # for non-customer accounts we use keys instead Our servers are running Ubuntu 12.04 LTS.

  Read the article

• 403 Error when accessing vhost directive

  - by Ortix92

  I'm having some troubles with setting up my webserver (Centos 5.8). It's a brand new server and I'm trying to set a vhost to the following dir: /home/exo/public_html However whenever I restart httpd I get the following warning: Code: Starting httpd: Warning: DocumentRoot [/home/exo/public_html] does not exist Yes the directory does exist. So whenever I visit the domain exo-l.com it gives me a 403 error. This is my config file (I put this inside my httpd.conf because the files in conf.d were not included for some reason. Or at least my newly created vhost conf file, but that has 0 priority for now) <VirtualHost *:80> DocumentRoot /home/exo/public_html ServerName www.exo-l.com ServerAlias exo-l.com <Directory /home/exo/public_html> Order allow,deny Allow from all </Directory> </VirtualHost I'm completely clueless because this should work as far as I know. httpd is being run as apache:apache i tried chowning the public_html directory (also recursively) to exo:apache, apache:apache, root:root with no success. chmod 777 doesn't do anything either. a tail from the log: [Sat Oct 13 15:10:04 2012] [error] [client 82.***.***.61] (13)Permission denied: access to / denied [Sat Oct 13 15:10:04 2012] [error] [client 82.***.***.61] (13)Permission denied: access to / denied I also found something about selinux and that disabling it might help, but do I really want to do that?

  Read the article

• Nginx configuration leads to endless redirect loop

  - by brianthecoder

  So I've looked at every sample configuration I could find and yet every time I try and view a page that requires ssl, I end up in an redirect loop. I'm running nginx/0.8.53 and passenger 3.0.2. Here's the ssl config server { listen 443 default ssl; server_name <redacted>.com www.<redacted>.com; root /home/app/<redacted>/public; passenger_enabled on; rails_env production; ssl_certificate /home/app/ssl/<redacted>.com.pem; ssl_certificate_key /home/app/ssl/<redacted>.key; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X_FORWARDED_PROTO https; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_set_header X-Url-Scheme $scheme; proxy_redirect off; proxy_max_temp_file_size 0; location /blog { rewrite ^/blog(/.*)?$ http://blog.<redacted>.com/$1 permanent; } location ~* \.(js|css|jpg|jpeg|gif|png)$ { if (-f $request_filename) { expires max; break; } } error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } } Here's the non-ssl config server { listen 80; server_name <redacted>.com www.<redacted>.com; root /home/app/<redacted>/public; passenger_enabled on; rails_env production; location /blog { rewrite ^/blog(/.*)?$ http://blog.<redacted>.com/$1 permanent; } location ~* \.(js|css|jpg|jpeg|gif|png)$ { if (-f $request_filename) { expires max; break; } } error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } } Let me know if there's any additional info I can give to help diagnose the issue.

  Read the article

• How to reinstall bootloader after migration to SSD

  - by hijarian

  I must say, it was difficult to name this question. Basically, I need to properly reinstall the bootloader on my system, because I already have the working system disks for my OSes. The long story is this: I had the large slow HDD with Windows7 & Debian Wheezy dual-boot on it, perfectly bootable. Then, I ordered the SSD drive and prepared my system partitions to fit onto the much smaller SSD. I wanted the following schema: 128 GB Windows 24 GB / on Debian 86 GB /home on Debian Strange size for /home because there's no such thing as true 256GB disk drive. So, I've prepared such a partitions on my initial HDD and installed the new SSD and then I loaded the GParted live USB (can't remember now how it was really named), and then just copypasted the partitions from HDD to SSD. So, now I have the following partitions across the physical disks: SSD 128 GB copy of original Windows partition 24 GB copy of presumably Debian / 86 GB copy of presumably Debian /home HDD 128 GB Windows 24 GB / on Debian 86 GB /home on Debian ... several other partitions with non-system data ... And the behavior of the system right after the Ctrl+C, Ctrl+V in GParted was as follows: no GRUB, system boots right into the Windows on HDD. In BIOS settings are to boot from SSD first. I managed to create the Debian Testing installation USB and loaded it into the rescue mode, found that it identified my SSD as /dev/sda and installed the GRUB to the /dev/sda. Now my system loads the GRUB which lists both Windows and Debian. From HDD. So, I am now back into initial position. Please, how I should set up the GRUB so it'll load the OSes correctly from SSD? Should I fire up my Debian, fiddle with the GRUB's config and reinstall it again to the same place (at SSD)?

  Read the article

• Remove an apache alias subdirectory

  - by Hippyjim

  I'm using Apache 2 on Ubuntu 12.04. I added an alias for a subdirectory, to point to gitweb. I realised I should probably make it accessible only on https - so I removed the alias and restarted Apache. I can still navigate to http://xyz/gitweb - even with no alias in any of my config files. How do I remove it? EDIT The config file looked like this before: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /home/administrator/webroot <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /home/administrator/webroot/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> Alias /gitweb/ /usr/share/gitweb/ <Directory /usr/share/gitweb/> Options ExecCGI +FollowSymLinks +SymLinksIfOwnerMatch AllowOverride All order allow,deny Allow from all AddHandler cgi-script cgiDirectory Index gitweb.cgi </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> And this after: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /home/administrator/webroot <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /home/administrator/webroot/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost>

  Read the article

• Count the Number of Characters in a Full FIle Path?

  - by Richie086

  I need to be able to count the number of characters in a full path to a file in windows. How I am currently accomplishing this task is as follows: Open a command prompt cd to the directory in question (for example c:\CruiseControl\ProjectArtifacts\ProjectName) type the following command dir /s /b output.csv Open the resulting output.csv file in excel. use the =LEN() function in excel to count the number of characters per row as listed in the output.csv file. Does anyone know of an explorer shell extension, or some 3rd party tool that could preform this function without me having to manipulate the output from dir in excel? Is there some easier way to go about doing this? The root of the issue I am having is the ~260 character file path limit in Windows. I am trying to analyze which paths are approx ~260 characters so I can shorten them to avoid getting this error.

  Read the article

• MS Excel Vba/Macro equivalent in LibreCalc or OpenOfficeCalc

  - by ReggieCL

  is there an equivalent macro/vba in libre calc that does this routine; - Read/open xls files in a path and do a batch import/copy of read sheets and merge it with the current open workbook. Here's the vba I used in MS Excel. Thanks in advance Sub Consolidate_Sheets() 'Folder Path to read the xlsx files from Path = "F:\WIP2\Below 25\" filename = Dir(Path & "*.xlsx") Do While filename <> "" Workbooks.Open filename:=Path & filename, ReadOnly:=True For Each sheet In ActiveWorkbook.Sheets 'import/copy sheets from to read xlsx files sheet.Copy After:=ThisWorkbook.Sheets(1) Next sheet Workbooks(filename).Close filename = Dir() Loop End Sub

  Read the article

< Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >