input device - Page 131

Macbook (non-pro, late 2010) Power Management Issues relating to Nvidia-Current drivers

- by gbvitaobscura

I have tried many potential solutions but to no avail! (this is going to be a long post) Essentially, when I first install ubuntu (I have tested 10.11-12.04 beta) I can change the brightness of the macbook backlight. One of the first things I usually do once my machine finishes installing is enter "sudo apt-get install nvidia-current" into the terminal to get my Nvidia graphics card set up. Before I install nvidia-current power management works flawlessly. After installing nvidia-current my graphics driver works mostly properly (more on that later). When I press F1 or F2 notify osd pops up and shows icon for the backlight along with a meter which changes according to how much I press F1 or F2, but the backlight does not change brightness at all. Two supplementary facts: when I am running off of battery power the backlight does not dim ever, also changing the backlight brightness through the terminal does not work (it recognizes the command but changes nothing). Things which did not work: 1. editing xorg.conf 2. python script/hack 3. editing grub Things which did work: 1. removing Nvidia-Current Final piece of information: Although my graphics card works in every way but Power Management it can not be found through System Settings/Details (Graphics Unknown) I'm using the NVIDIA GeForce 320M. the output of lspci is: 00:00.0 Host bridge: NVIDIA Corporation MCP89 HOST Bridge (rev a1) 00:00.1 RAM memory: NVIDIA Corporation MCP89 Memory Controller (rev a1) 00:01.0 RAM memory: NVIDIA Corporation Device 0d6d (rev a1) 00:01.1 RAM memory: NVIDIA Corporation Device 0d6e (rev a1) 00:01.2 RAM memory: NVIDIA Corporation Device 0d6f (rev a1) 00:01.3 RAM memory: NVIDIA Corporation Device 0d70 (rev a1) 00:02.0 RAM memory: NVIDIA Corporation Device 0d71 (rev a1) 00:02.1 RAM memory: NVIDIA Corporation Device 0d72 (rev a1) 00:03.0 ISA bridge: NVIDIA Corporation MCP89 LPC Bridge (rev a2) 00:03.1 RAM memory: NVIDIA Corporation MCP89 Memory Controller (rev a1) 00:03.2 SMBus: NVIDIA Corporation MCP89 SMBus (rev a1) 00:03.3 RAM memory: NVIDIA Corporation MCP89 Memory Controller (rev a1) 00:03.4 Co-processor: NVIDIA Corporation MCP89 Co-Processor (rev a1) 00:04.0 USB controller: NVIDIA Corporation MCP89 OHCI USB 1.1 Controller (rev a1) 00:04.1 USB controller: NVIDIA Corporation MCP89 EHCI USB 2.0 Controller (rev a2) 00:06.0 USB controller: NVIDIA Corporation MCP89 OHCI USB 1.1 Controller (rev a1) 00:06.1 USB controller: NVIDIA Corporation MCP89 EHCI USB 2.0 Controller (rev a2) 00:08.0 Audio device: NVIDIA Corporation MCP89 High Definition Audio (rev a2) 00:09.0 Ethernet controller: NVIDIA Corporation MCP89 Ethernet (rev a1) 00:0a.0 IDE interface: NVIDIA Corporation MCP89 SATA Controller (rev a2) 00:0b.0 RAM memory: NVIDIA Corporation Device 0d75 (rev a1) 00:15.0 PCI bridge: NVIDIA Corporation Device 0d9b (rev a1) 00:17.0 PCI bridge: NVIDIA Corporation MCP89 PCI Express Bridge (rev a1) 01:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01) 02:00.0 VGA compatible controller: NVIDIA Corporation Device 08a0 (rev a2) There is a very similar bug on Launchpad which I have posted below. https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers/+bug/764195

Read the article

What does the `dmesg` error: "composite sync not supported" mean?

- by M. Tibbits

Question: I see [ 20.473125] composite sync not supported and several such entries when I run dmesg. What do they mean? Background: I'm trying to debug a problem where my laptop won't suspend. Since acpi seems happy and I can suspend easily from the command line, I've turned to tracking down all boot-up errors/warnings. So I run dmesg | grep not and, amongst other shtuff, I get: 728:[ 17.267120] composite sync not supported 733:[ 18.009061] composite sync not supported 740:[ 18.159289] registered panic notifier 749:[ 18.162500] vga16fb: not registering due to another framebuffer present 757:[ 18.598251] composite sync not supported 776:[ 20.473125] composite sync not supported 777:[ 20.932266] composite sync not supported 778:[ 28.350231] composite sync not supported 779:[ 28.924913] composite sync not supported 780:[ 35.480658] composite sync not supported And the full log for the few lines right around that first appearance (line 728) is listed at the bottom of my post (I'd happily include anything else). Any ideas what could be causing this? I've read several sites: Ubuntuforums #1 IRC Chat #1 One post talks about ??Adobe flash?? causing this error? Some others also suggest that it might be an nvidia related problem, but I've got a Dell Latitude D630 with an integrated Intel graphics -- so nvidia isn't the problem. [ 17.207142] phy0: Selected rate control algorithm 'minstrel' [ 17.207833] Registered led device: b43-phy0::tx [ 17.207849] Registered led device: b43-phy0::rx [ 17.207865] Registered led device: b43-phy0::radio [ 17.207927] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 17.267120] composite sync not supported [ 17.415795] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 17.602131] [drm] initialized overlay support [ 17.620201] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input7 [ 17.641192] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input8 [ 18.009061] composite sync not supported [ 18.106042] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 18.108115] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 18.108941] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 18.109676] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 18.110356] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 18.159286] fb0: inteldrmfb frame buffer device [ 18.159289] registered panic notifier [ 18.160218] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input9 [ 18.160286] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 18.160334] ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433) [ 18.160432] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:02/input/input10 [ 18.160491] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 18.160539] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 18.162494] vga16fb: initializing [ 18.162497] vga16fb: mapped to 0xc00a0000 [ 18.162500] vga16fb: not registering due to another framebuffer present [ 18.176091] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 18.176123] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 18.285752] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11 [ 18.312497] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 18.312586] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 18.328043] usbcore: registered new interface driver ndiswrapper [ 18.460909] Console: switching to colour frame buffer device 180x56 [ 18.598251] composite sync not supported

Read the article

Send raw data to USB parallel port after upgrading to 11.10

- by zaphod

I have a laser cutter connected via a generic USB to parallel adapter. The laser cutter speaks HPGL, as it happens, but since this is a laser cutter and not a plotter, I usually want to generate the HPGL myself, since I care about the ordering, speed, and direction of cuts and so on. In previous versions of Ubuntu, I was able to print to the cutter by copying an HPGL file directly to the corresponding USB "lp" device. For example: cp foo.plt /dev/usblp1 Well, I just upgraded to Ubuntu 11.10 oneiric, and I can't find any "lp" devices in /dev anymore. D'oh! What's the preferred way to send raw data to a parallel port in Ubuntu? I've tried System Settings Printing + Add, hoping that I might be able to associate my device with some kind of "raw printer" driver and print to it with a command like lp -d LaserCutter foo.plt But my USB to parallel adapter doesn't seem to show up in the list. What I do see are my HP Color LaserJet, two USB-to-serial adapters, "Enter URI", and "Network Printer". Meanwhile, over in /dev, I do see /dev/ttyUSB0 and /dev/ttyUSB1 devices for the 2 USB-to-serial adapters. I don't see anything obvious corresponding to the HP printer (which was /dev/usblp0 prior to the upgrade), except for generic USB stuff. For example, sudo find /dev | grep lp produces no output. I do seem to be able to print to the HP printer just fine, though. The printer setup GUI gives it a device URI starting with "hp:" which isn't much help for the parallel adapter. The CUPS administrator's guide makes it sound like I might need to feed it a device URI of the form parallel:/dev/SOMETHING, but of course if I had a /dev/SOMETHING I'd probably just go on writing to it directly. Here's what dmesg says after I disconnect and reconnect the device from the USB port: [ 924.722906] usb 1-1.1.4: USB disconnect, device number 7 [ 959.993002] usb 1-1.1.4: new full speed USB device number 8 using ehci_hcd And here's how it shows up in lsusb -v: Bus 001 Device 008: ID 1a86:7584 QinHeng Electronics CH340S Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x1a86 QinHeng Electronics idProduct 0x7584 CH340S bcdDevice 2.52 iManufacturer 0 iProduct 2 USB2.0-Print iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 96mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 7 Printer bInterfaceSubClass 1 Printer bInterfaceProtocol 2 Bidirectional iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Device Status: 0x0000 (Bus Powered)

Read the article

Just re-installed Ubuntu 14.04, unstable wireless connection, Lenovo ThinkPad X200

- by Mark Lawtie

I re-installed Ubuntu 14.04 as I was having problems with unstable wireless connection... Following re-installation I am having the same problem: connection randomly dropping out, then reconnecting... all my other devices are running well when connected I am a bit of a computer novice so any help would be greatly appreciated... I am running Lenovo ThinkPad X200 laptop... Thanks! mark@mark-ThinkPad-X200:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07) 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection mark@mark-ThinkPad-X200:~$ mark@mark-ThinkPad-X200:~$ lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 026: ID 0a5c:2145 Broadcom Corp. BCM2045B (BDC-2.1) [Bluetooth Controller] Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub mark@mark-ThinkPad-X200:~$

Read the article

Microphone not capturing sound on 12.04 Lenovo G580

- by Yam Marcovic

In both Skype and the Sound Recorder application, I am not capturing any audio from my built-in microphone. I'm not sure why. Otherwise, sound output is working well. I have tried running gstreamer-properties and setting the Default Input plugin to PulseAUdio as well (to match the output), and it didn't help. I have tried running alsamixer -V all and I only get 2 input-related entries: Capture(L R) which is on 100 and not muted (can't be either), and Analog Mic Boost which is on 20db. Extra info: Camera (video) is working well on Skype and Kamerka. Can you please help me get my microphone to work? lspci: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device 3977 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 42 Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 3000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI]) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 41 Region 0: Memory at e0600000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 43 Region 0: Memory at e0614000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI]) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at e0619000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at e0610000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: e0500000-e05fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: e0400000-e04fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI]) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at e0618000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) Subsystem: Lenovo Device 3977 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Lenovo Device 3977 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 40 Region 0: I/O ports at 3088 [size=8] Region 1: I/O ports at 3094 [size=4] Region 2: I/O ports at 3080 [size=8] Region 3: I/O ports at 3090 [size=4] Region 4: I/O ports at 3060 [size=32] Region 5: Memory at e0617000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) Subsystem: Lenovo Device 3977 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 10 Region 0: Memory at e0615000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 3040 [size=32] Kernel modules: i2c-i801 01:00.0 Ethernet controller: Atheros Communications Inc. AR8162 Fast Ethernet (rev 08) Subsystem: Lenovo Device 3979 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0500000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at 2000 [size=128] Capabilities: <access denied> 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: Lenovo Device 31a1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at e0400000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k Kernel modules: ath9k aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0

Read the article

Draw Rectangle To All Dimensions of Image

- by opiop65

I have some rudimentary collision code: public class Collision { static boolean isColliding = false; static Rectangle player; static Rectangle female; public static void collision(){ Rectangle player = Game.Playerbounds(); Rectangle female = Game.Femalebounds(); if(player.intersects(female)){ isColliding = true; }else{ isColliding = false; } } } And this is the rectangle code: public static Rectangle Playerbounds() { return(new Rectangle(posX, posY, 25, 25)); } public static Rectangle Femalebounds() { return(new Rectangle(femaleX, femaleY, 25, 25)); } My InputHandling class: public static void movePlayer(GameContainer gc, int delta){ Input input = gc.getInput(); if(input.isKeyDown(input.KEY_W)){ Game.posY -= walkSpeed * delta; walkUp = true; if(Collision.isColliding == true){ Game.posY += walkSpeed * delta; } } if(input.isKeyDown(input.KEY_S)){ Game.posY += walkSpeed * delta; walkDown = true; if(Collision.isColliding == true){ Game.posY -= walkSpeed * delta; } } if(input.isKeyDown(input.KEY_D)){ Game.posX += walkSpeed * delta; walkRight = true; if(Collision.isColliding == true){ Game.posX -= walkSpeed * delta; } } if(input.isKeyDown(input.KEY_A)){ Game.posX -= walkSpeed * delta; walkLeft = true; if(Collision.isColliding == true){ Game.posX += walkSpeed * delta; } } } The code works partially. Only the right and top side of the images collide. How do I correct the rectangle so it will draw on all sides? Thanks for any suggestions!

Read the article

Who could ask for more with LESS CSS? (Part 3 of 3–Clrizr)

- by ToString(theory);

Welcome back! In the first two posts in this series, I covered some of the awesome features in CSS precompilers such as SASS and LESS, as well as how to get an initial project setup up and running in ASP.Net MVC 4. In this post, I will cover an actual advanced example of using LESS in a project, and show some of the great productivity features we gain from its usage. Introduction In the first post, I mentioned two subjects that I will be using in this example – constants, and color functions. I’ve always enjoyed using online color scheme utilities such as Adobe Kuler or Color Scheme Designer to come up with a scheme based off of one primary color. Using these tools, and requesting a complementary scheme you can get a couple of shades of your primary color, and a couple of shades of a complementary/accent color to display. Because there is no way in regular css to do color operations or store variables, there was no way to accomplish something like defining a primary color, and have a site theme cascade off of that. However with tools such as LESS, that impossibility becomes a reality! So, if you haven’t guessed it by now, this post is on the creation of a plugin/module/less file to drop into your project, plugin one color, and have your primary theme cascade from it. I only went through the trouble of creating a module for getting Complementary colors. However, it wouldn’t be too much trouble to go through other options such as Triad or Monochromatic to get a module that you could use off of that. Step 1 – Analysis I decided to mimic Adobe Kuler’s Complementary theme algorithm as I liked its simplicity and aesthetics. Color Scheme Designer is great, but I do believe it can give you too many color options, which can lead to chaos and overload. The first thing I had to check was if the complementary values for the color schemes were actually hues rotated by 180 degrees at all times – they aren’t. Apparently Adobe applies some variance to the complementary colors to get colors that are actually more aesthetically appealing to users. So, I opened up Excel and began to plot complementary hues based on rotation in increments of 10: Long story short, I completed the same calculations for Hue, Saturation, and Lightness. For Hue, I only had to record the Complementary hue values, however for saturation and lightness, I had to record the values for ALL of the shades. Since the functions were too complicated to put into LESS since they aren’t constant/linear, but rather interval functions, I instead opted to extrapolate the HSL values using the trendline function for each major interval, onto intervals of spacing 1. For example, using the hue extraction, I got the following values: Interval Function 0-60 60-140 140-270 270-360 Saturation and Lightness were much worse, but in the end, I finally had functions for all of the intervals, and then went the route of just grabbing each shades value in intervals of 1. Step 2 – Mapping I declared variable names for each of these sections as something that shouldn’t ever conflict with a variable someone would define in their own file. After I had each of the values, I extracted the values and put them into files of their own for hue variables, saturation variables, and lightness variables… Example: /*HUE CONVERSIONS*/@clrizr-hue-source-0deg: 133.43;@clrizr-hue-source-1deg: 135.601;@clrizr-hue-source-2deg: 137.772;@clrizr-hue-source-3deg: 139.943;@clrizr-hue-source-4deg: 142.114;.../*SATURATION CONVERSIONS*/@clrizr-saturation-s2SV0px: 0;@clrizr-saturation-s2SV1px: 0;@clrizr-saturation-s2SV2px: 0;@clrizr-saturation-s2SV3px: 0;@clrizr-saturation-s2SV4px: 0;.../*LIGHTNESS CONVERSIONS*/@clrizr-lightness-s2LV0px: 30;@clrizr-lightness-s2LV1px: 31;@clrizr-lightness-s2LV2px: 32;@clrizr-lightness-s2LV3px: 33;@clrizr-lightness-s2LV4px: 34;... In the end, I have 973 lines of mapping/conversion from source HSL to shade HSL for two extra primary shades, and two complementary shades. The last bit of the work was the file to compose each of the shades from these mappings. Step 3 – Clrizr Mapper The final step was the hardest to overcome as I was still trying to understand LESS to its fullest extent. Imports As mentioned previously, I had separated the HSL mappings into different files, so the first necessary step is to import those for use into the Clrizr plugin: @import url("hue.less");@import url("saturation.less");@import url("lightness.less"); Extract Component Values For Each Shade Next, I extracted the necessary information for each shade HSL before shade composition: @clrizr-input-saturation: 1px+floor(saturation(@clrizr-input))-1;@clrizr-input-lightness: 1px+floor(lightness(@clrizr-input))-1; @clrizr-complementary-hue: formatstring("clrizr-hue-source-{0}", ceil(hue(@clrizr-input))); @clrizr-primary-2-saturation: formatstring("clrizr-saturation-s2SV{0}",@clrizr-input-saturation);@clrizr-primary-1-saturation: formatstring("clrizr-saturation-s1SV{0}",@clrizr-input-saturation);@clrizr-complementary-1-saturation: formatstring("clrizr-saturation-c1SV{0}",@clrizr-input-saturation); @clrizr-primary-2-lightness: formatstring("clrizr-lightness-s2LV{0}",@clrizr-input-lightness);@clrizr-primary-1-lightness: formatstring("clrizr-lightness-s1LV{0}",@clrizr-input-lightness);@clrizr-complementary-1-lightness: formatstring("clrizr-lightness-c1LV{0}",@clrizr-input-lightness); Here, you can see a couple of odd things… On the first line, I am using operations to add units to the saturation and lightness. This is due to some limitations in the operations that would give me saturation or lightness in %, which can’t be in a variable name. So, I use first add 1px to it, which casts the result of the following functions as px instead of %, and then at the end, I remove that pixel. You can also see here the formatstring method which is exactly what it sounds like – something like String.Format(string str, params object[] obj). Get Primary & Complementary Shades Now that I have components for each of the different shades, I can now compose them into each of their pieces. For this, I use the @@ operator which will look for a variable with the name specified in a string, and then call that variable: @clrizr-primary-2: hsl(hue(@clrizr-input), @@clrizr-primary-2-saturation, @@clrizr-primary-2-lightness);@clrizr-primary-1: hsl(hue(@clrizr-input), @@clrizr-primary-1-saturation, @@clrizr-primary-1-lightness);@clrizr-primary: @clrizr-input;@clrizr-complementary-1: hsl(@@clrizr-complementary-hue, @@clrizr-complementary-1-saturation, @@clrizr-complementary-1-lightness);@clrizr-complementary-2: hsl(@@clrizr-complementary-hue, saturation(@clrizr-input), lightness(@clrizr-input)); That’s is it, for the most part. These variables now hold the theme for the one input color – @clrizr-input. However, I have one last addition… Perceptive Luminance Well, after I got the colors, I decided I wanted to also get the best font color that would go on top of it. Black or white depending on light or dark color. Now I couldn’t just go with checking the lightness, as that is half the story. You see, the human eye doesn’t see ALL colors equally well but rather has more cells for interpreting green light compared to blue or red. So, using the ratio, we can calculate the perceptive luminance of each of the shades, and get the font color that best matches it! @clrizr-perceptive-luminance-ps2: round(1 - ( (0.299 * red(@clrizr-primary-2) ) + ( 0.587 * green(@clrizr-primary-2) ) + (0.114 * blue(@clrizr-primary-2)))/255)*255;@clrizr-perceptive-luminance-ps1: round(1 - ( (0.299 * red(@clrizr-primary-1) ) + ( 0.587 * green(@clrizr-primary-1) ) + (0.114 * blue(@clrizr-primary-1)))/255)*255;@clrizr-perceptive-luminance-ps: round(1 - ( (0.299 * red(@clrizr-primary) ) + ( 0.587 * green(@clrizr-primary) ) + (0.114 * blue(@clrizr-primary)))/255)*255;@clrizr-perceptive-luminance-pc1: round(1 - ( (0.299 * red(@clrizr-complementary-1)) + ( 0.587 * green(@clrizr-complementary-1)) + (0.114 * blue(@clrizr-complementary-1)))/255)*255;@clrizr-perceptive-luminance-pc2: round(1 - ( (0.299 * red(@clrizr-complementary-2)) + ( 0.587 * green(@clrizr-complementary-2)) + (0.114 * blue(@clrizr-complementary-2)))/255)*255; @clrizr-col-font-on-primary-2: rgb(@clrizr-perceptive-luminance-ps2, @clrizr-perceptive-luminance-ps2, @clrizr-perceptive-luminance-ps2);@clrizr-col-font-on-primary-1: rgb(@clrizr-perceptive-luminance-ps1, @clrizr-perceptive-luminance-ps1, @clrizr-perceptive-luminance-ps1);@clrizr-col-font-on-primary: rgb(@clrizr-perceptive-luminance-ps, @clrizr-perceptive-luminance-ps, @clrizr-perceptive-luminance-ps);@clrizr-col-font-on-complementary-1: rgb(@clrizr-perceptive-luminance-pc1, @clrizr-perceptive-luminance-pc1, @clrizr-perceptive-luminance-pc1);@clrizr-col-font-on-complementary-2: rgb(@clrizr-perceptive-luminance-pc2, @clrizr-perceptive-luminance-pc2, @clrizr-perceptive-luminance-pc2); Conclusion That’s it! I have posted a project on clrizr.codePlex.com for this, and included a testing page for you to test out how it works. Feel free to use it in your own project, and if you have any questions, comments or suggestions, please feel free to leave them here as a comment, or on the contact page!

Read the article

Including Microsoft.XNA.Framework.Input.Touch in a project?

- by steven_desu

So after running through tutorials by both Microsoft and www.xnadevelopment.com I feel very confident in my ability to get to work on my first game using the XNA Framework. I've manipulated sprites, added audio, changed game states, and even went a step further to apply the knowledge I had and figure out how to make animations and basic 2-dimensional physics (including impulses, force, acceleration, and speed calculations) But then shortly into the project I hit a curious bump that I've been unable to figure out. In wanting to implement menus, pause screens, and several different aspects of play (a "pre-level" prep screen, the level itself, and a screen after the level to review how well you did) I took a look at Microsoft's Game State Management sample. I understood the concept, although it was admittedly quite a lot to take in. Not wanting to recreate the entire concept by scratch (after all- what purpose would that serve?) I tried copying and pasting the sample code into my own ScreenManager class (as well as InputState and GameScreen classes) to try and borrow their ingenuity. When I did this, however, my project stopped compiling. I was getting the following error: The type or namespace name 'Touch' does not exist in the namespace 'Microsoft.Xna.Framework.Input' (are you missing an assembly reference?) Having read through their sample code already, I realized that this namespace and every function and class within it could be safely ripped from the code without losing functionality. It's a namespace simply for integrating with touchscreen devices (presumably Windows Phone 7, but maybe also tablets). But then I began to wonder- how come Microsoft's sample compiled but mine didn't? I copied their code exactly so there must be a setting somewhere that I need to change in Visual Studio in order to correct this. I tried creating a new project as a Windows Phone 7 game rather than a Windows game, however that only forced it to compile to a Windows Phone emulator and denied me the ability to change the resolution and other features which I clearly had the power to do in the sample code. So my question is simple - how do I properly use the namespace Microsoft.XNA.Framework.Input.Touch?

Read the article

Throwing and catching exceptions in the same function/method

- by usr

I've written a function that asks a user for input until user enters a positive integer (a natural number). Somebody said I shouldn't throw and catch exceptions in my function and should let the caller of my function handle them. I wonder what other developers think about this. I'm also probably misusing exceptions in the function. Here's the code in Java: private static int sideInput() { int side = 0; String input; Scanner scanner = new Scanner(System.in); do { System.out.print("Side length: "); input = scanner.nextLine(); try { side = Integer.parseInt(input); if (side <= 0) { // probably a misuse of exceptions throw new NumberFormatException(); } } catch (NumberFormatException numFormExc) { System.out.println("Invalid input. Enter a natural number."); } } while (side <= 0); return side; } I'm interested in two things: Should I let the caller worry about exceptions? The point of the function is that it nags the user until the user enters a natural number. Is the point of the function bad? I'm not talking about UI (user not being able to get out of the loop without proper input), but about looped input with exceptions handled. Would you say the throw statement (in this case) is a misuse of exceptions? I could easily create a flag for checking validity of the number and output the warning message based on that flag. But that would add more lines to the code and I think it's perfectly readable as it is. The thing is I often write a separate input function. If user has to input a number multiple times, I create a separate function for input that handles all formatting exceptions and limitations.

Read the article

Send raw data to USB parallel port after upgrading to 11.10 oneiric

- by zaphod

I have a laser cutter connected via a generic USB to parallel adapter. The laser cutter speaks HPGL, as it happens, but since this is a laser cutter and not a plotter, I usually want to generate the HPGL myself, since I care about the ordering, speed, and direction of cuts and so on. In previous versions of Ubuntu, I was able to print to the cutter by copying an HPGL file directly to the corresponding USB "lp" device. For example: cp foo.plt /dev/usblp1 Well, I just upgraded to Ubuntu 11.10 oneiric, and I can't find any "lp" devices in /dev anymore. D'oh! What's the preferred way to send raw data to a parallel port in Ubuntu? I've tried System Settings Printing + Add, hoping that I might be able to associate my device with some kind of "raw printer" driver and print to it with a command like lp -d LaserCutter foo.plt But my USB to parallel adapter doesn't seem to show up in the list. What I do see are my HP Color LaserJet, two USB-to-serial adapters, "Enter URI", and "Network Printer". Meanwhile, over in /dev, I do see /dev/ttyUSB0 and /dev/ttyUSB1 devices for the 2 USB-to-serial adapters. I don't see anything obvious corresponding to the HP printer (which was /dev/usblp0 prior to the upgrade), except for generic USB stuff. For example, sudo find /dev | grep lp produces no output. I do seem to be able to print to the HP printer just fine, though. The printer setup GUI gives it a device URI starting with "hp:" which isn't much help for the parallel adapter. The CUPS administrator's guide makes it sound like I might need to feed it a device URI of the form parallel:/dev/SOMETHING, but of course if I had a /dev/SOMETHING I'd probably just go on writing to it directly. Here's what dmesg says after I disconnect and reconnect the device from the USB port: [ 924.722906] usb 1-1.1.4: USB disconnect, device number 7 [ 959.993002] usb 1-1.1.4: new full speed USB device number 8 using ehci_hcd And here's how it shows up in lsusb -v: Bus 001 Device 008: ID 1a86:7584 QinHeng Electronics CH340S Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x1a86 QinHeng Electronics idProduct 0x7584 CH340S bcdDevice 2.52 iManufacturer 0 iProduct 2 USB2.0-Print iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 96mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 7 Printer bInterfaceSubClass 1 Printer bInterfaceProtocol 2 Bidirectional iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Device Status: 0x0000 (Bus Powered)

Read the article

How to make other semantics behave like SV_Position?

- by object

I'm having a lot of trouble with shadow mapping, and I believe I've found the problem. When passing vectors from the vertex shader to the pixel shader, does the hardware automatically change any of the values based on the semantic? I've compiled a barebones pair of shaders which should illustrate the problem. Vertex shader : struct Vertex { float3 position : POSITION; }; struct Pixel { float4 position : SV_Position; float4 light_position : POSITION; }; cbuffer Matrices { matrix projection; }; Pixel RenderVertexShader(Vertex input) { Pixel output; output.position = mul(float4(input.position, 1.0f), projection); output.light_position = output.position; // We simply pass the same vector in screenspace through different semantics. return output; } And a simple pixel shader to go along with it: struct Pixel { float4 position : SV_Position; float4 light_position : POSITION; }; float4 RenderPixelShader(Pixel input) : SV_Target { // At this point, (input.position.z / input.position.w) is a normal depth value. // However, (input.light_position.z / input.light_position.w) is 0.999f or similar. // If the primitive is touching the near plane, it very quickly goes to 0. return (0.0f).rrrr; } How is it possible to make the hardware treat light_position in the same way which position is being treated between the vertex and pixel shaders? EDIT: Aha! (input.position.z) without dividing by W is the same as (input.light_position.z / input.light_position.w). Not sure why this is.

Read the article

Iptables rules make communication so slow

- by mmc18

When I have send a request to an application running on a machine which following firewall rules are applied, it waits so long. When I have deactivated the iptables rule, it responses immediately. What makes communication so slow? -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -p esp -j ACCEPT -A INPUT -i ppp+ -j ACCEPT -A INPUT -p udp -m udp --dport 500 -j ACCEPT -A INPUT -p udp -m udp --dport 4500 -j ACCEPT -A INPUT -p udp -m udp --dport 1701 -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -i lo -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 -A FORWARD -i ppp+ -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT

Read the article

jQuery,Input buttons work in markup, but not when prepended?

- by thatryan

I have to buttons, image input that work fine when in the markup like this, <input type="image" class="play" src="images/play.png" /> <input type="image" class="pause" src="images/pause.png" /> But as soon as I try to prepend() it to a generated they still appear, but the click function does not work anymore. $('.gallery-nav').prepend('<input type="image" class="play" src="images/play.png" /><input type="image" class="pause" src="images/pause.png" />'); Any idea why? Thank you.

Read the article

How can I change standart input/output of another program?

- by Azad Salahli

I have a console application written in c++. It simply reads an integer from standard input(keyboard) and writes another integer to standard output(screen). Now I want to give some tests to that program and check its answers using another program. In another words, I want to write electron judge for that program. I want that program(which I want to test) to read from file and write to file without changing source code. How can I do that. I tried assigning input&output to files before executing c++ program, but it did not worked. assign(input,'temp.in'); reset(input); assign(output,'temp.out'); rewrite(output); exec('domino.exe'); close(input); close(output);

Read the article

Disabling checkboxes based on selection of another checkbox in jquery

- by Prady

Hi, I want to disable a set of checkbox based on selection of one textbox and enable the disabled ones if the checkbox is unchecked. In the code below. If someone checks the checkbox for project cost under change this parameter then checkbox for project cost under Generate simulated value for this param should be disabled and all the checkboxes under change this parameter should be disabled except for checked one. Similarly this should be done each parameter like Project cost,avg hours,Project completion date, hourly rate etc. One way i could think of was of on the click function disable each checkbox by the id. Is there a better way of doing it? <table> <tr> <td></td> <td></td> <td>Change this parameter</td> <td>Generate simulated value for this param</td> </tr> <tr> <td>Project cost</td> <td><input type ="text" id ="pc"/></td> <td><input class="change" type="checkbox" name="chkBox" id="chkBox"></input></td> <td><input class="sim" type="checkbox" name="chkBox1" id="chkBox1"></input></td> </tr> <tr> <td>Avg hours</td> <td><input type ="text" id ="avghrs"/></td> <td><input class="change" type="checkbox" name="chkBoxa" id="chkBoxa"></input></td> <td><input class="sim" type="checkbox" name="chkBox1a" id="chkBox1a"></input></td> </tr> <tr> <td>Project completion date</td> <td><input type ="text" id ="cd"/></td> <td><input class="change" type="checkbox" name="chkBoxb" id="chkBoxb"></input></td> <td><input class="sim" type="checkbox" name="chkBox1b" id="chkBox1b"></input></td> </tr> <tr> <td>Hourly rate</td> <td><input type ="text" id ="hr"/></td> <td><input class="change" type="checkbox" name="chkBoxc" id="chkBoxc"></input></td> <td><input class="sim" type="checkbox" name="chkBox1c" id="chkBox1c"></input></td> </tr> </table> Thanks Prady

Read the article

How to get the class of an input inside a jQuery each loop?

- by Paul Atkins

Hi, I have function which appends inputs inside a list item when a link is clicked. I then loop through these inputs using an each loop using the code below. It is working correctly as shown, however instead of using field.name I want to use the class of the input as the array key but when i try to do this the class is shown as undefined. Here is the code I am currently using: var values = {}; $.each($('li :input').serializeArray(), function(i, field) { values[field.name] = field.value; }); Here is the code I have inside the list item once I have appended the hidden inputs using jQuery append: <li><input type="hidden" name="group" class="group" value="2"/><input type="hidden" name="condition" class="condition" value="isany"/><input type="hidden" name="value" class="value" value="1,2"/></li> I can get the name attribute fine but class is always undefined. Could anybody help with this?

Read the article

2D metaball liquid effect - how to feed output of one rendering pass as input to another shader

- by Guye Incognito

I'm attempting to make a shader for unity3d web project. I want to implement something like in the great answer by DMGregory in this question. in order to achieve a final look something like this.. Its metaballs with specular and shading. The steps to make this shader are. 1. Convert the feathered blobs into a heightmap. 2. Generate a normalmap from the heightmap 3. Feed the normal map and height map into a standard unity shader, for instance transparent parallax specular. I pretty much have all the pieces I need assembled but I am new to shaders and need help putting them together I can generate a heightmap from the blobs using some fragment shader code I wrote (I'm just using the red channel here cus i dont know if you can access the brightness) half4 frag (v2f i) : COLOR{ half4 texcol,finalColor; texcol = tex2D (_MainTex, i.uv); finalColor=_MyColor; if(texcol.r<_botmcut) { finalColor.r= 0; } else if((texcol.r>_topcut)) { finalColor.r= 0; } else { float r = _topcut-_botmcut; float xpos = _topcut - texcol.r; finalColor.r= (_botmcut + sqrt((xpos*xpos)-(r*r)))/_constant; } return finalColor; } turns these blobs.. into this heightmap Also I've found some CG code that generates a normal map from a height map. The bit of code that makes the normal map from finite differences is here void surf (Input IN, inout SurfaceOutput o) { o.Albedo = fixed3(0.5); float3 normal = UnpackNormal(tex2D(_BumpMap, IN.uv_MainTex)); float me = tex2D(_HeightMap,IN.uv_MainTex).x; float n = tex2D(_HeightMap,float2(IN.uv_MainTex.x,IN.uv_MainTex.y+1.0/_HeightmapDimY)).x; float s = tex2D(_HeightMap,float2(IN.uv_MainTex.x,IN.uv_MainTex.y-1.0/_HeightmapDimY)).x; float e = tex2D(_HeightMap,float2(IN.uv_MainTex.x-1.0/_HeightmapDimX,IN.uv_MainTex.y)).x; float w = tex2D(_HeightMap,float2(IN.uv_MainTex.x+1.0/_HeightmapDimX,IN.uv_MainTex.y)).x; float3 norm = normal; float3 temp = norm; //a temporary vector that is not parallel to norm if(norm.x==1) temp.y+=0.5; else temp.x+=0.5; //form a basis with norm being one of the axes: float3 perp1 = normalize(cross(norm,temp)); float3 perp2 = normalize(cross(norm,perp1)); //use the basis to move the normal in its own space by the offset float3 normalOffset = -_HeightmapStrength * ( ( (n-me) - (s-me) ) * perp1 + ( ( e - me ) - ( w - me ) ) * perp2 ); norm += normalOffset; norm = normalize(norm); o.Normal = norm; } Also here is the built-in transparent parallax specular shader for unity. Shader "Transparent/Parallax Specular" { Properties { _Color ("Main Color", Color) = (1,1,1,1) _SpecColor ("Specular Color", Color) = (0.5, 0.5, 0.5, 0) _Shininess ("Shininess", Range (0.01, 1)) = 0.078125 _Parallax ("Height", Range (0.005, 0.08)) = 0.02 _MainTex ("Base (RGB) TransGloss (A)", 2D) = "white" {} _BumpMap ("Normalmap", 2D) = "bump" {} _ParallaxMap ("Heightmap (A)", 2D) = "black" {} } SubShader { Tags {"Queue"="Transparent" "IgnoreProjector"="True" "RenderType"="Transparent"} LOD 600 CGPROGRAM #pragma surface surf BlinnPhong alpha #pragma exclude_renderers flash sampler2D _MainTex; sampler2D _BumpMap; sampler2D _ParallaxMap; fixed4 _Color; half _Shininess; float _Parallax; struct Input { float2 uv_MainTex; float2 uv_BumpMap; float3 viewDir; }; void surf (Input IN, inout SurfaceOutput o) { half h = tex2D (_ParallaxMap, IN.uv_BumpMap).w; float2 offset = ParallaxOffset (h, _Parallax, IN.viewDir); IN.uv_MainTex += offset; IN.uv_BumpMap += offset; fixed4 tex = tex2D(_MainTex, IN.uv_MainTex); o.Albedo = tex.rgb * _Color.rgb; o.Gloss = tex.a; o.Alpha = tex.a * _Color.a; o.Specular = _Shininess; o.Normal = UnpackNormal(tex2D(_BumpMap, IN.uv_BumpMap)); } ENDCG } FallBack "Transparent/Bumped Specular" }

Read the article

Is it safe to use any USB charger for charging any USB device?

- by Vineet Menon

I have an apple USB AC charger which is rated to provide 5V, 1A output and a Sony mp3 player NWZ B143F. I don't know the spec of Sony audio player. But I have another mp3 player from Transcend which is rated to take 5V, 1A input voltage. So, is it safe to assume that Sony or for that matter any mainstream mp3 player would take 5V, 1A as input? Is it safe to use the apple charger with Sony mp3 player?

Read the article

Acer aspire 5735z wireless not working after upgrade to 11.10

- by Jon

I cant get my wifi card to work at all after upgrading to 11.10 Oneiric. I'm not sure where to start to fix this. Ive tried using the additional drivers tool but this shows that no additional drivers are needed. Before my upgrade I had a drivers working for the Rt2860 chipset. Any help on this would be much appreciated.... thanks Jon jon@ubuntu:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1d:72:ec:76:d5 inet addr:192.168.1.134 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21d:72ff:feec:76d5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7846 errors:0 dropped:0 overruns:0 frame:0 TX packets:7213 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8046624 (8.0 MB) TX bytes:1329442 (1.3 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:91 errors:0 dropped:0 overruns:0 frame:0 TX packets:91 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:34497 (34.4 KB) TX bytes:34497 (34.4 KB) Ive included by dmesg output below [ 0.428818] NET: Registered protocol family 2 [ 0.429003] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.430562] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.436614] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.437409] TCP: Hash tables configured (established 524288 bind 65536) [ 0.437412] TCP reno registered [ 0.437431] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.437482] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.437678] NET: Registered protocol family 1 [ 0.437705] pci 0000:00:02.0: Boot video device [ 0.437892] PCI: CLS 64 bytes, default 64 [ 0.437916] Simple Boot Flag at 0x57 set to 0x1 [ 0.438294] audit: initializing netlink socket (disabled) [ 0.438309] type=2000 audit(1319243447.432:1): initialized [ 0.440763] Freeing initrd memory: 13416k freed [ 0.468362] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.488192] VFS: Disk quotas dquot_6.5.2 [ 0.488254] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.488888] fuse init (API version 7.16) [ 0.488985] msgmni has been set to 5890 [ 0.489381] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.489413] io scheduler noop registered [ 0.489415] io scheduler deadline registered [ 0.489460] io scheduler cfq registered (default) [ 0.489583] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.489633] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.489699] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.489741] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.489800] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.489841] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X [ 0.489904] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.489944] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X [ 0.490006] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.490047] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X [ 0.490126] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.490149] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.490196] intel_idle: MWAIT substates: 0x1110 [ 0.490198] intel_idle: does not run on family 6 model 15 [ 0.491240] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.493473] ACPI: AC Adapter [ADP1] (on-line) [ 0.493590] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.496771] ACPI: Lid Switch [LID0] [ 0.496818] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.496823] ACPI: Sleep Button [SLPB] [ 0.496865] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.496869] ACPI: Power Button [PWRF] [ 0.496900] ACPI: acpi_idle registered with cpuidle [ 0.498719] Monitor-Mwait will be used to enter C-1 state [ 0.498753] Monitor-Mwait will be used to enter C-2 state [ 0.498761] Marking TSC unstable due to TSC halts in idle [ 0.517627] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.517630] ACPI: Thermal Zone [TZS0] (67 C) [ 0.524796] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.524799] ACPI: Thermal Zone [TZS1] (67 C) [ 0.524823] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.524852] ERST: Table is not found! [ 0.524948] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.680991] ACPI: Battery Slot [BAT0] (battery present) [ 0.688567] Linux agpgart interface v0.103 [ 0.688672] agpgart-intel 0000:00:00.0: Intel GM45 Chipset [ 0.688865] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.689786] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 0.689912] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.691006] brd: module loaded [ 0.691510] loop: module loaded [ 0.691967] Fixed MDIO Bus: probed [ 0.691990] PPP generic driver version 2.4.2 [ 0.692065] tun: Universal TUN/TAP device driver, 1.6 [ 0.692067] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 0.692146] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.692181] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 0.692206] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.692210] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.692255] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.692289] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.696181] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 0.696202] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xf8904800 [ 0.712014] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.712131] hub 1-0:1.0: USB hub found [ 0.712136] hub 1-0:1.0: 6 ports detected [ 0.712230] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.712243] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.712247] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.712287] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.712315] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.716201] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.716216] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8904c00 [ 0.732014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.732130] hub 2-0:1.0: USB hub found [ 0.732135] hub 2-0:1.0: 6 ports detected [ 0.732209] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.732223] uhci_hcd: USB Universal Host Controller Interface driver [ 0.732254] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.732262] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.732265] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.732298] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.732325] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820 [ 0.732441] hub 3-0:1.0: USB hub found [ 0.732445] hub 3-0:1.0: 2 ports detected [ 0.732508] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 0.732514] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.732518] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.732553] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.732577] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840 [ 0.732696] hub 4-0:1.0: USB hub found [ 0.732700] hub 4-0:1.0: 2 ports detected [ 0.732762] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 0.732768] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.732772] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.732805] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.732829] uhci_hcd 0000:00:1a.2: irq 20, io base 0x00001860 [ 0.732942] hub 5-0:1.0: USB hub found [ 0.732946] hub 5-0:1.0: 2 ports detected [ 0.733007] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.733014] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.733017] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.733057] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.733082] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 [ 0.733202] hub 6-0:1.0: USB hub found [ 0.733206] hub 6-0:1.0: 2 ports detected [ 0.733265] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.733273] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.733276] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.733313] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.733351] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018a0 [ 0.733466] hub 7-0:1.0: USB hub found [ 0.733470] hub 7-0:1.0: 2 ports detected [ 0.733532] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.733539] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.733542] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.733578] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.733610] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 [ 0.733730] hub 8-0:1.0: USB hub found [ 0.733736] hub 8-0:1.0: 2 ports detected [ 0.733843] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.751594] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.751605] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.751732] mousedev: PS/2 mouse device common for all mice [ 0.752670] rtc_cmos 00:08: RTC can wake from S4 [ 0.752770] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 0.752796] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.752907] device-mapper: uevent: version 1.0.3 [ 0.752976] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected] [ 0.753028] cpuidle: using governor ladder [ 0.753093] cpuidle: using governor menu [ 0.753096] EFI Variables Facility v0.08 2004-May-17 [ 0.753361] TCP cubic registered [ 0.753482] NET: Registered protocol family 10 [ 0.753966] NET: Registered protocol family 17 [ 0.753992] Registering the dns_resolver key type [ 0.754113] PM: Hibernation image not present or could not be loaded. [ 0.754131] registered taskstats version 1 [ 0.771553] Magic number: 15:152:507 [ 0.771667] rtc_cmos 00:08: setting system clock to 2011-10-22 00:30:48 UTC (1319243448) [ 0.772238] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.772240] EDD information not available. [ 0.774165] Freeing unused kernel memory: 984k freed [ 0.774504] Write protecting the kernel read-only data: 10240k [ 0.774755] Freeing unused kernel memory: 20k freed [ 0.775093] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.779727] Freeing unused kernel memory: 1400k freed [ 0.801946] udevd[84]: starting version 173 [ 0.880950] sky2: driver version 1.28 [ 0.881046] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.881096] sky2 0000:02:00.0: setting latency timer to 64 [ 0.881197] sky2 0000:02:00.0: Yukon-2 Extreme chip revision 2 [ 0.881871] sky2 0000:02:00.0: irq 45 for MSI/MSI-X [ 0.896273] sky2 0000:02:00.0: eth0: addr 00:1d:72:ec:76:d5 [ 0.910630] ahci 0000:00:1f.2: version 3.0 [ 0.910647] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.910710] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X [ 0.910775] ahci: SSS flag set, parallel bus scan disabled [ 0.910812] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 0.910816] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs [ 0.910821] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.941773] scsi0 : ahci [ 0.941954] scsi1 : ahci [ 0.942038] scsi2 : ahci [ 0.942118] scsi3 : ahci [ 0.942196] scsi4 : ahci [ 0.942268] scsi5 : ahci [ 0.942332] ata1: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904100 irq 46 [ 0.942336] ata2: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904180 irq 46 [ 0.942339] ata3: DUMMY [ 0.942340] ata4: DUMMY [ 0.942344] ata5: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904300 irq 46 [ 0.942347] ata6: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904380 irq 46 [ 1.028061] usb 1-5: new high speed USB device number 2 using ehci_hcd [ 1.181775] usbcore: registered new interface driver uas [ 1.260062] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.261126] ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40C, max UDMA/133 [ 1.261129] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.262360] ata1.00: configured for UDMA/133 [ 1.262518] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54322 FBEO PQ: 0 ANSI: 5 [ 1.262716] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.262762] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.262824] sd 0:0:0:0: [sda] Write Protect is off [ 1.262827] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.262851] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.287277] sda: sda1 sda2 sda3 [ 1.287693] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.580059] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.581188] ata2.00: ATAPI: HL-DT-STDVDRAM GT10N, 1.00, max UDMA/100 [ 1.582663] ata2.00: configured for UDMA/100 [ 1.584162] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT10N 1.00 PQ: 0 ANSI: 5 [ 1.585821] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.585824] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.585953] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.586038] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.632061] usb 6-1: new low speed USB device number 2 using uhci_hcd [ 1.908056] ata5: SATA link down (SStatus 0 SControl 300) [ 2.228065] ata6: SATA link down (SStatus 0 SControl 300) [ 2.228955] Initializing USB Mass Storage driver... [ 2.229052] usbcore: registered new interface driver usb-storage [ 2.229054] USB Mass Storage support registered. [ 2.235827] scsi6 : usb-storage 1-5:1.0 [ 2.235987] usbcore: registered new interface driver ums-realtek [ 2.244451] input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input4 [ 2.244598] generic-usb 0003:046D:C025.0001: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0 [ 2.244620] usbcore: registered new interface driver usbhid [ 2.244622] usbhid: USB HID core driver [ 3.091083] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) [ 3.238275] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 3.348261] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.351897] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 47.138012] udevd[334]: starting version 173 [ 47.177678] lp: driver loaded but no devices found [ 47.197084] wmi: Mapper loaded [ 47.197526] acer_wmi: Acer Laptop ACPI-WMI Extras [ 47.210227] acer_wmi: Brightness must be controlled by generic video driver [ 47.566578] Disabling lock debugging due to kernel taint [ 47.584050] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 47.620666] type=1400 audit(1319239895.347:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=624 comm="apparmor_parser" [ 47.620934] type=1400 audit(1319239895.347:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=624 comm="apparmor_parser" [ 47.621108] type=1400 audit(1319239895.347:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=624 comm="apparmor_parser" [ 47.633056] [drm] Initialized drm 1.1.0 20060810 [ 47.722594] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 47.722602] i915 0000:00:02.0: setting latency timer to 64 [ 47.807152] ndiswrapper (check_nt_hdr:141): kernel is 64-bit, but Windows driver is not 64-bit;bad magic: 010B [ 47.807159] ndiswrapper (load_sys_files:206): couldn't prepare driver 'rt2860' [ 47.807930] ndiswrapper (load_wrap_driver:108): couldn't load driver rt2860; check system log for messages from 'loadndisdriver' [ 47.856250] usbcore: registered new interface driver ndiswrapper [ 47.861772] i915 0000:00:02.0: irq 47 for MSI/MSI-X [ 47.861781] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 47.861783] [drm] Driver supports precise vblank timestamp query. [ 47.861842] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 47.980620] fixme: max PWM is zero. [ 48.286153] fbcon: inteldrmfb (fb0) is primary device [ 48.287033] Console: switching to colour frame buffer device 170x48 [ 48.287062] fb0: inteldrmfb frame buffer device [ 48.287064] drm: registered panic notifier [ 48.333883] acpi device:02: registered as cooling_device2 [ 48.334053] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 48.334128] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 48.334203] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 48.334644] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 48.334652] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 48.334673] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 48.334737] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 48.334772] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 48.356107] Adding 261116k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:261116k [ 48.380946] hda_codec: ALC268: BIOS auto-probing. [ 48.390242] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 48.390365] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 48.490870] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,user_xattr [ 48.917990] ppdev: user-space parallel port driver [ 48.950729] type=1400 audit(1319239896.675:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=941 comm="apparmor_parser" [ 48.951114] type=1400 audit(1319239896.675:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=941 comm="apparmor_parser" [ 48.977706] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000 [ 49.048871] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 49.078713] sky2 0000:02:00.0: eth0: enabling interface [ 49.079462] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 50.762266] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 50.762702] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 54.751478] type=1400 audit(1319239902.475:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1039 comm="apparmor_parser" [ 54.755907] type=1400 audit(1319239902.479:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1040 comm="apparmor_parser" [ 54.756237] type=1400 audit(1319239902.483:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1040 comm="apparmor_parser" [ 54.756417] type=1400 audit(1319239902.483:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1040 comm="apparmor_parser" [ 54.764825] type=1400 audit(1319239902.491:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1041 comm="apparmor_parser" [ 54.768365] type=1400 audit(1319239902.495:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1041 comm="apparmor_parser" [ 54.770601] type=1400 audit(1319239902.495:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1041 comm="apparmor_parser" [ 54.770729] type=1400 audit(1319239902.495:14): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1038 comm="apparmor_parser" [ 54.775181] type=1400 audit(1319239902.499:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1043 comm="apparmor_parser" [ 54.775533] type=1400 audit(1319239902.499:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1043 comm="apparmor_parser" [ 54.936691] init: failsafe main process (891) killed by TERM signal [ 54.944583] init: apport pre-start process (1096) terminated with status 1 [ 55.000373] init: apport post-stop process (1160) terminated with status 1 [ 55.005291] init: gdm main process (1159) killed by TERM signal [ 59.782579] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 [ 60.992021] eth0: no IPv6 routers present [ 61.936072] device eth0 entered promiscuous mode [ 62.053949] Bluetooth: Core ver 2.16 [ 62.054005] NET: Registered protocol family 31 [ 62.054007] Bluetooth: HCI device and connection manager initialized [ 62.054010] Bluetooth: HCI socket layer initialized [ 62.054012] Bluetooth: L2CAP socket layer initialized [ 62.054993] Bluetooth: SCO socket layer initialized [ 62.058750] Bluetooth: RFCOMM TTY layer initialized [ 62.058758] Bluetooth: RFCOMM socket layer initialized [ 62.058760] Bluetooth: RFCOMM ver 1.11 [ 62.059428] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 62.059432] Bluetooth: BNEP filters: protocol multicast [ 62.460389] init: plymouth-stop pre-start process (1662) terminated with status 1 '

Read the article

.NET/C#: How to remove/minimize code clutter while 'triggering' Events

- by eibhrum

Hi, I just wanna find out if there's a way I could minimize code clutter in my application. I have written code/s similar to this: private void btnNext_MouseEnter(object sender, System.Windows.Input.MouseEventArgs e) { btnNext.Opacity = 1; } private void btnNext_MouseLeave(object sender, System.Windows.Input.MouseEventArgs e) { btnNext.Opacity = 0.5; } private void btnShowAll_MouseEnter(object sender, System.Windows.Input.MouseEventArgs e) { btnShowAll.Opacity = 1; } private void btnShowAll_MouseLeave(object sender, System.Windows.Input.MouseEventArgs e) { btnShowAll.Opacity = 0.5; } private void btnPrev_MouseEnter(object sender, System.Windows.Input.MouseEventArgs e) { btnPrev.Opacity = 1; } private void btnPrev_MouseLeave(object sender, System.Windows.Input.MouseEventArgs e) { btnPrev.Opacity = 0.5; } private void btnSearch_MouseEnter(object sender, System.Windows.Input.MouseEventArgs e) { btnSearch.Opacity = 1; } private void btnSearch_MouseLeave(object sender, System.Windows.Input.MouseEventArgs e) { btnSearch.Opacity = 0.5; } private void btnSearchStore_MouseEnter(object sender, System.Windows.Input.MouseEventArgs e) { btnSearchStore.Opacity = 1; } private void btnSearchStore_MouseLeave(object sender, System.Windows.Input.MouseEventArgs e) { btnSearchStore.Opacity = 0.5; } private void btnCloseSearch_MouseEnter(object sender, System.Windows.Input.MouseEventArgs e) { btnCloseSearch.Opacity = 1; } private void btnCloseSearch_MouseLeave(object sender, System.Windows.Input.MouseEventArgs e) { btnCloseSearch.Opacity = 0.5; } private void btnHome_MouseEnter(object sender, System.Windows.Input.MouseEventArgs e) { btnHome.Opacity = 1; } private void btnHome_MouseLeave(object sender, System.Windows.Input.MouseEventArgs e) { btnHome.Opacity = 0.5; } and so on and so forth... Do I need to create a 'function' that will run initially? Or do I have to create another class just so I can 'organize' them? Any suggestions?

Read the article

Is the salt contained in a phpass hash or do you need to salt its input?

- by Exception e

phpass is a widely used hashing 'framework'. Is it good practice to salt the plain password before giving it to PasswordHash (v0.2), like so?: $dynamicSalt = $record['salt']; $staticSalt = 'i5ininsfj5lt4hbfduk54fjbhoxc80sdf'; $plainPassword = $_POST['password']; $password = $plainPassword . $dynamicSalt . $staticSalt; $passwordHash = new PasswordHash(8, false); $storedPassword = $passwordHash->HashPassword($password); For reference the phpsalt class: # Portable PHP password hashing framework. # # Version 0.2 / genuine. # # Written by Solar Designer <solar at openwall.com> in 2004-2006 and placed in # the public domain. # # # class PasswordHash { var $itoa64; var $iteration_count_log2; var $portable_hashes; var $random_state; function PasswordHash($iteration_count_log2, $portable_hashes) { $this->itoa64 = './0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz'; if ($iteration_count_log2 < 4 || $iteration_count_log2 > 31) $iteration_count_log2 = 8; $this->iteration_count_log2 = $iteration_count_log2; $this->portable_hashes = $portable_hashes; $this->random_state = microtime() . getmypid(); } function get_random_bytes($count) { $output = ''; if (is_readable('/dev/urandom') && ($fh = @fopen('/dev/urandom', 'rb'))) { $output = fread($fh, $count); fclose($fh); } if (strlen($output) < $count) { $output = ''; for ($i = 0; $i < $count; $i += 16) { $this->random_state = md5(microtime() . $this->random_state); $output .= pack('H*', md5($this->random_state)); } $output = substr($output, 0, $count); } return $output; } function encode64($input, $count) { $output = ''; $i = 0; do { $value = ord($input[$i++]); $output .= $this->itoa64[$value & 0x3f]; if ($i < $count) $value |= ord($input[$i]) << 8; $output .= $this->itoa64[($value >> 6) & 0x3f]; if ($i++ >= $count) break; if ($i < $count) $value |= ord($input[$i]) << 16; $output .= $this->itoa64[($value >> 12) & 0x3f]; if ($i++ >= $count) break; $output .= $this->itoa64[($value >> 18) & 0x3f]; } while ($i < $count); return $output; } function gensalt_private($input) { $output = '$P$'; $output .= $this->itoa64[min($this->iteration_count_log2 + ((PHP_VERSION >= '5') ? 5 : 3), 30)]; $output .= $this->encode64($input, 6); return $output; } function crypt_private($password, $setting) { $output = '*0'; if (substr($setting, 0, 2) == $output) $output = '*1'; if (substr($setting, 0, 3) != '$P$') return $output; $count_log2 = strpos($this->itoa64, $setting[3]); if ($count_log2 < 7 || $count_log2 > 30) return $output; $count = 1 << $count_log2; $salt = substr($setting, 4, 8); if (strlen($salt) != 8) return $output; # We're kind of forced to use MD5 here since it's the only # cryptographic primitive available in all versions of PHP # currently in use. To implement our own low-level crypto # in PHP would result in much worse performance and # consequently in lower iteration counts and hashes that are # quicker to crack (by non-PHP code). if (PHP_VERSION >= '5') { $hash = md5($salt . $password, TRUE); do { $hash = md5($hash . $password, TRUE); } while (--$count); } else { $hash = pack('H*', md5($salt . $password)); do { $hash = pack('H*', md5($hash . $password)); } while (--$count); } $output = substr($setting, 0, 12); $output .= $this->encode64($hash, 16); return $output; } function gensalt_extended($input) { $count_log2 = min($this->iteration_count_log2 + 8, 24); # This should be odd to not reveal weak DES keys, and the # maximum valid value is (2**24 - 1) which is odd anyway. $count = (1 << $count_log2) - 1; $output = '_'; $output .= $this->itoa64[$count & 0x3f]; $output .= $this->itoa64[($count >> 6) & 0x3f]; $output .= $this->itoa64[($count >> 12) & 0x3f]; $output .= $this->itoa64[($count >> 18) & 0x3f]; $output .= $this->encode64($input, 3); return $output; } function gensalt_blowfish($input) { # This one needs to use a different order of characters and a # different encoding scheme from the one in encode64() above. # We care because the last character in our encoded string will # only represent 2 bits. While two known implementations of # bcrypt will happily accept and correct a salt string which # has the 4 unused bits set to non-zero, we do not want to take # chances and we also do not want to waste an additional byte # of entropy. $itoa64 = './ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789'; $output = '$2a$'; $output .= chr(ord('0') + $this->iteration_count_log2 / 10); $output .= chr(ord('0') + $this->iteration_count_log2 % 10); $output .= '$'; $i = 0; do { $c1 = ord($input[$i++]); $output .= $itoa64[$c1 >> 2]; $c1 = ($c1 & 0x03) << 4; if ($i >= 16) { $output .= $itoa64[$c1]; break; } $c2 = ord($input[$i++]); $c1 |= $c2 >> 4; $output .= $itoa64[$c1]; $c1 = ($c2 & 0x0f) << 2; $c2 = ord($input[$i++]); $c1 |= $c2 >> 6; $output .= $itoa64[$c1]; $output .= $itoa64[$c2 & 0x3f]; } while (1); return $output; } function HashPassword($password) { $random = ''; if (CRYPT_BLOWFISH == 1 && !$this->portable_hashes) { $random = $this->get_random_bytes(16); $hash = crypt($password, $this->gensalt_blowfish($random)); if (strlen($hash) == 60) return $hash; } if (CRYPT_EXT_DES == 1 && !$this->portable_hashes) { if (strlen($random) < 3) $random = $this->get_random_bytes(3); $hash = crypt($password, $this->gensalt_extended($random)); if (strlen($hash) == 20) return $hash; } if (strlen($random) < 6) $random = $this->get_random_bytes(6); $hash = $this->crypt_private($password, $this->gensalt_private($random)); if (strlen($hash) == 34) return $hash; # Returning '*' on error is safe here, but would _not_ be safe # in a crypt(3)-like function used _both_ for generating new # hashes and for validating passwords against existing hashes. return '*'; } function CheckPassword($password, $stored_hash) { $hash = $this->crypt_private($password, $stored_hash); if ($hash[0] == '*') $hash = crypt($password, $stored_hash); return $hash == $stored_hash; } }

Read the article

Text Parsing - My Parser Skipping commands

- by The.Anti.9

I'm trying to parse text-formatting. I want to mark inline code, much like SO does, with backticks (`). The rule is supposed to be that if you want to use a backtick inside of an inline code element, You should use double backticks around the inline code. like this: `` mark inline code with backticks ( ` ) `` My parser seems to skip over the double backticks completely for some reason. Heres the code for the function that does the inline code parsing: private string ParseInlineCode(string input) { for (int i = 0; i < input.Length; i++) { if (input[i] == '`' && input[i - 1] != '\\') { if (input[i + 1] == '`') { string str = ReadToCharacter('`', i + 2, input); while (input[i + str.Length + 2] != '`') { str += ReadToCharacter('`', i + str.Length + 3, input); } string tbr = "``" + str + "``"; str = str.Replace("&", "&"); str = str.Replace("<", "<"); str = str.Replace(">", ">"); input = input.Replace(tbr, "<code>" + str + "</code>"); i += str.Length + 13; } else { string str = ReadToCharacter('`', i + 1, input); input = input.Replace("`" + str + "`", "<code>" + str + "</code>"); i += str.Length + 13; } } } return input; } If I use single backticks around something, it wraps it in the <code> tags correctly.

Read the article

CSS style to create an HTML with an image on left and input text boxes on right that fills all space

- by dafi

I need to create an HTML page (a JqueryUI dialog but this isn't the problem) containing an image on left (size is fixed to 75x75) and on right some input text boxes, input boxes must resize to all remaining space. You can see an example at http://img683.imageshack.us/img683/5412/19483174.jpg The problem is that when I resize the dialog controls move under image as shown at http://img510.imageshack.us/img510/4817/44749696.jpg How can I resolve this problem in all browser and if possible using only CSS? Below I show my HTML code and the CSS I'm using HTML code <div id="dialog-form" title="Modify Post"> <form action=""> <fieldset> <img id="dialog-modify-thumb" src="http://dummyimage.com/75x75/000/fff" alt="" width="75" height="75"/> <div id="dialog-modify-controls"> <label for="dialog-modify-caption">Caption</label> <input type="text" name="dialog-modify-caption" id="dialog-modify-caption"/> <br/> <label for="dialog-modify-tags">Tags</label> <input type="text" name="dialog-modify-tags" id="dialog-modify-tags"/> <br/> <label for="dialog-modify-publish-date">Publish Date</label> <input type="text" name="dialog-modify-publish-date" id="dialog-modify-publish-date"/> </div> </fieldset> </form> </div> The CSS #dialog-modify-thumb { margin-right: 3px; border: 1px solid; display: block; float:left; } #dialog-form input[type='text'] { width: 100%; } #dialog-modify-controls { float: right; width:100%; }

Read the article

PayPal return URL

- by Sam

Here's the code for my Paypal button: <form action="https://www.sandbox.paypal.com/cgi-bin/webscr" method="post"> <input type="hidden" name="cmd" value="_xclick"> <input type="hidden" name="business" value="[email protected]"> <input type="hidden" name="lc" value="GB"> <input type="hidden" name="button_subtype" value="products"> <input type="hidden" name="no_note" value="1"> <input type="hidden" name="no_shipping" value="1"> <input type="hidden" name="rm" value="0"> <input type="hidden" name="return" value="http://www.example.com"> <input type="hidden" name="item_name" value="My Item"> <input type="hidden" name="amount" value="25.00"> <input type="hidden" name="currency_code" value="GBP"> <input type="hidden" name="bn" value="PP-BuyNowBF:proceed_btn.gif:NonHosted"> <input type="hidden" name="item_number" value="4BD9569402CDE"> <input type="image" src="http://www.example.com/image.gif" border="0" name="submit" alt="PayPal - The safer, easier way to pay online."> <img alt="" border="0" src="https://www.paypal.com/en_GB/i/scr/pixel.gif" width="1" height="1"> </form> Is it possible to add the item_number to the return URL? For example, after completing the payment within PayPal the user gets sent back to http://www.example.com?item_number=4BD9569402CDE

Read the article

Customized listfield with image displaying from a url

- by arunabha

I am displaying a customized list field with text on the right side and image on the left side.The image comes from a URL dynamically.Initially i am placing a blank image on the left of the list field,then call URLBitmapField class's setURL method,which actually does the processing and places the processed image on top of the blank image.The image gets displayed on the list field,but to see that processed image i need to press any key or click on the list field items.I want the processed image to be displayed automatically in the list field after the processing.Can anyone tell me where i am getting wrong? import java.util.Vector; import net.rim.device.api.system.Bitmap; import net.rim.device.api.system.Display; import net.rim.device.api.ui.ContextMenu; import net.rim.device.api.ui.DrawStyle; import net.rim.device.api.ui.Field; import net.rim.device.api.ui.Font; import net.rim.device.api.ui.Graphics; import net.rim.device.api.ui.Manager; import net.rim.device.api.ui.MenuItem; import net.rim.device.api.ui.UiApplication; import net.rim.device.api.ui.component.BitmapField; import net.rim.device.api.ui.component.Dialog; import net.rim.device.api.ui.component.LabelField; import net.rim.device.api.ui.component.ListField; import net.rim.device.api.ui.component.ListFieldCallback; import net.rim.device.api.ui.component.NullField; import net.rim.device.api.ui.container.FullScreen; import net.rim.device.api.ui.container.MainScreen; import net.rim.device.api.ui.container.VerticalFieldManager; import net.rim.device.api.util.Arrays; import net.rim.device.api.ui.component.ListField; public class TaskListField extends UiApplication { // statics // ------------------------------------------------------------------ public static void main(String[] args) { TaskListField theApp = new TaskListField(); theApp.enterEventDispatcher(); } public TaskListField() { pushScreen(new TaskList()); } } class TaskList extends MainScreen implements ListFieldCallback { private Vector rows; private Bitmap p1; private Bitmap p2; private Bitmap p3; String Task; ListField listnew = new ListField(); private VerticalFieldManager metadataVFM; TableRowManager row; public TaskList() { super(); URLBitmapField artistImgField; listnew.setRowHeight(80); listnew.setCallback(this); rows = new Vector(); for (int x = 0; x <3; x++) { row = new TableRowManager(); artistImgField = new URLBitmapField(Bitmap .getBitmapResource("res/images/bg.jpg")); row.add(artistImgField); String photoURL = "someimagefrmurl.jpg"; Log.info(photoURL); // strip white spaces in the url, which is causing the // images to not display properly for (int i = 0; i < photoURL.length(); i++) { if (photoURL.charAt(i) == ' ') { photoURL = photoURL.substring(0, i) + "%20" + photoURL.substring(i + 1, photoURL.length()); } } Log.info("Processed URL: " + photoURL); artistImgField.setURL(photoURL); LabelField task = new LabelField("Display"); row.add(task); LabelField task1 = new LabelField( "Now Playing" + String.valueOf(x)); Font myFont = Font.getDefault().derive(Font.PLAIN, 12); task1.setFont(myFont); row.add(task1); rows.addElement(row); } listnew.setSize(rows.size()); this.add(listnew); //listnew.invalidate(); } // ListFieldCallback Implementation public void drawListRow(ListField listField, Graphics g, int index, int y, int width) { TableRowManager rowManager = (TableRowManager) rows.elementAt(index); rowManager.drawRow(g, 0, y, width, listnew.getRowHeight()); } protected void drawFocus(Graphics graphics, boolean on) { } private class TableRowManager extends Manager { public TableRowManager() { super(0); } // Causes the fields within this row manager to be layed out then // painted. public void drawRow(Graphics g, int x, int y, int width, int height) { // Arrange the cell fields within this row manager. layout(width, height); // Place this row manager within its enclosing list. setPosition(x, y); // Apply a translating/clipping transformation to the graphics // context so that this row paints in the right area. g.pushRegion(getExtent()); // Paint this manager's controlled fields. subpaint(g); g.setColor(0x00CACACA); g.drawLine(0, 0, getPreferredWidth(), 0); // Restore the graphics context. g.popContext(); } // Arrages this manager's controlled fields from left to right within // the enclosing table's columns. protected void sublayout(int width, int height) { // set the size and position of each field. int fontHeight = Font.getDefault().getHeight(); int preferredWidth = getPreferredWidth(); // start with the Bitmap Field of the priority icon Field field = getField(0); layoutChild(field, 146,80); setPositionChild(field, 0, 0); // set the task name label field field = getField(1); layoutChild(field, preferredWidth - 16, fontHeight + 1); setPositionChild(field, 149, 3); // set the list name label field field = getField(2); layoutChild(field, 150, fontHeight + 1); setPositionChild(field, 149, fontHeight + 6); setExtent(360, 480); } // The preferred width of a row is defined by the list renderer. public int getPreferredWidth() { return listnew.getWidth(); } // The preferred height of a row is the "row height" as defined in the // enclosing list. public int getPreferredHeight() { return listnew.getRowHeight(); } } public Object get(ListField listField, int index) { // TODO Auto-generated method stub return null; } public int getPreferredWidth(ListField listField) { return 0; } public int indexOfList(ListField listField, String prefix, int start) { // TODO Auto-generated method stub return 0; } }

Search Results

Search found 26977 results on 1080 pages for 'input device'.

Page 131/1080 | < Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138 | Next Page >

- by gbvitaobscura

- by M. Tibbits

- by zaphod

- by Mark Lawtie

- by Yam Marcovic

- by opiop65

- by ToString(theory);

- by steven_desu

- by usr

- by zaphod

- by object

- by mmc18

- by thatryan

- by Azad Salahli

- by Prady

- by Paul Atkins

- by Guye Incognito

- by Vineet Menon

- by Jon

- by eibhrum

- by Exception e

- by The.Anti.9

- by dafi

- by Sam

- by arunabha

< Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138 | Next Page >