Search Results

Search found 8056 results on 323 pages for 'external'.

Page 132/323 | < Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >

  • Boost Audio Input on OS X?

    - by alanstorm
    I'm using my 13" Mac Book Pro's audio input functionality with an external microphone (recent vintage, bought around Thanksgiving). I've increased my input volume to the maximum in system preference, but the resulting recorded volume (using iShowU HD) is very low. Is there anyway to increase the input volume/sensitivity beyond Apple's default settings? I've found plenty on google about increasing the OUTPUT volume, but I want to increase the input volume.

    Read the article

  • Why is my extended desktop configuration being reset after a reboot with Kubuntu 10.04?

    - by Graeme Donaldson
    I'm running Kubuntu 10.04 x64 on a Lenovo ThinkPad R500, with an external monitor attached. If I configure extended desktop, everything works fine. The settings look like this: After a reboot, these settings are reset and both screens are mirrored. The settings look like this: I had my extended desktop working just fine under Ubuntu/GNOME, so I'm assuming there's something different about how KDE handles this config, I just can't seem to find the answer. Anyone know how to get my configuration to stick?

    Read the article

  • What is the best way to keep a folder synchronized with my USB drive?

    - by Ivo Flipse
    I know there is a similar topic on syncing between computers, but I'm looking for an application to run on one computer that will sync a "document/file" folder with a folder on my secondary/external USB drive. What would be the best solution? I know I could use Dropbox & Live Mesh, but they use up bandwith which isn't very good when I drop in a lot of large files. I'm running Windows 7, but I assume any solution for Windows Vista would work just fine.

    Read the article

  • USB-Powered Speakers

    - by Jonathan Sampson
    I use a set of external USB speakers at the office which have no power-source other than my laptop USB port. Sometimes they're silent, and at others it sounds like an electric moth is fluttering around inside one of the speakers (the main speaker). This doesn't happen when my machine is doing any heavy crunching, it just comes and goes. This has happened with other USB speakers on other laptops too in my experience. Any idea on what causes this, and how I can fix it?

    Read the article

  • Are Time Machine backups secure?

    - by Leandro Ardissone
    I have my Time Machine backups on an external disk (WD My Passport with no hardware encryption) and I'm worried if the data stored on the disk is safe in case somebody steals it and connect it to any Mac/PC. Does any Mac can browse the Time Machine backups? Or are they encrypted in any way? If no, is there a way to improve security of the backups, should I buy a hardware encryption based HD? Thanks.

    Read the article

  • Does a laptop with a GPU also use IGP?

    - by blee
    I have a Thinkpad T60 with dual screen setup: The laptop's LCD: Is normal looking. VGA external monitor: Looks "wavy," but I hooked it up to another computer and it looked fine. Does this imply my GPU is connected to the VGA-out and the built-in LCD is driven by IGP? Is this typically how a laptop with one GPU works? Thanks.

    Read the article

  • Are FC and SAS DAS devices standard enough?

    - by user222182
    Before I ask my questions, here is some background info that may or may not be useful: For the first time I find myself needing a DAS solution. My priority is data through-put in a single direction. I can write large blocks, and I don't need to read at the same time. The server (the data producing device) is not really a typical server, its a very powerful single board computer. As such I have limited options when it comes to the add-in cards I can install since it must use the fairly uncommon interface, XMC. Currently I believe I am limited PCIex8 gen 1 which means that the likely bottle neck for me will be this 16gbps connection. XMC Boards I have found so far offer the following connections: a) Dual 10GBE ethernet controller, total throughput 20gbps b) Dual Quad SAS 2.0 Connectors (SFF-8XXX) HBA (no raid), total throughput 48 gbps c) Dual FC 8gb HBA (no raid), total throughput 16gbps My questions for you guys are: 1) Are SAS and/or FC, and by extension their HBAs, standard enough that I could purchase a Dell or Aberdeen storage server with a raid controller that has external SAS or FC ports and expect that I can connect it to my SAS or FC HBA, be presented with a single volume (if I so configured the storage server), all without having to check for HBA compatibility? 2) On a device like a Dell PowerVault (either DAS or NAS) is there an OS on it to concern myself with, or is it meant to be remotely managed? Is there a local interface in case I cant remotely manage it (i.e. if my single board computer uses an OS not supported by Dell OpenManage). Would this be true of nearly any device which calls itself a DAS? 3) If I purchase some sort of Supermicro storage chassis, installed a raid controller with external connections, is there a nice lightweight OS I can run just for management of the controller? Would I even need an OS since the raid card would be configured pre-boot anyway? 4) It is much easier to buy XMC based 10gigabit ethernet cards (generally dual port). In what ways would I be getting into trouble by using iSCSI as a DAS are direct cabling with SFP+ cables? Thanks in advance

    Read the article

  • Looking for an application to act as a file bucket / consolidate - with auto tag and duplicate elimi

    - by Notitze
    Is there a windows application that can help with consolidating file libraries (documents, projects, pictures, music) into an archive? I'm looking for: eliminate redundant files by replacing duplicates with links add tags from keywords and date (year) allow an easy dump from multiple external media files (USB sticks, USB drives) Nice to have would be: auto indexing for easy search anything else that makes it easy to find and retrieve a file

    Read the article

  • Cannot Boot - Ubuntu 9.10

    - by c00lryguy
    I installed Ubuntu 9.10 from my laptop onto a HDD in an external harddrive enclosure. I could not connect online so I plugged it into another computer and updated the system. Now when I plugged it back into my laptop, I cannot boot. It says "ALERT! /dev/sdd1 does not exist. Dropping to shell!" and has a shell that says (initramfs)

    Read the article

  • is my touchpad dying? Gentoo Linux

    - by Walter White
    Hi all, My touchpad on my laptop appears to be no longer functioning. I typically use an external keyboard and mouse so I didn't notice the problem until I tried to use the touchpad. Even after toggling the on/off switch several times, the touchpad still doesn't work. In the logs, I see something about cannot read byte from synaptics device. I will post the full logs when I am in front of my machine. Thanks, Walter

    Read the article

  • Free, cross-platform screen recording utility

    - by abc
    I am looking for a screen recording (video) utility. Desired features are: It should be free (higher in priority) It should be available for Windows, Linux, and Mac (Mac in lower priority, Linux or Windows will work) It should have mic input facility to record external sound as well as machine's sound. It should have highlighting functionality (lower in priority)

    Read the article

  • Cisco IPSec, nat, and port forwarding don't play well together

    - by Alan
    I have two Cisco ADSL modems configured conventionally to nat the inside traffic to the ISP. That works. I have two port forwards on one of them for SMTP and IMAP from the outside to the inside this provides external access to the mail server. This works. The modem doing the port forwarding also terminates PPTP VPN traffic. There are two DNS servers one inside the office which resolves mail to the local address, one outside the office which resolves mail for the rest of the world to the external interface. That all works. I recently added an IPSec VPN between the two modems and that works for every thing EXCEPT connections over the IPSec VPN to the mail server on port 25 or 143 from workstations on the remote lan. It would seem that the modem with the port forwards is confusing traffic from the mail server destined for a machine on the other side of the IPSec VPN for traffic that should go back to a port forward connection. PPTP VPN traffic to the mail server is fine. Is this a scenario anybody is familiar with and are there any suggestions on how to work around it? Many thanks Alan But wait there is more..... This is the strategic parts of the nat config. A route map is used to exclude the lans that are reachable via IPSec tunnels from being Nated. int ethernet0 ip nat inside int dialer1 ip nat outside ip nat inside source route-map nonat interface Dialer1 overload route-map nonat permit 10 match ip address 105 access-list 105 remark *** Traffic to NAT access-list 105 deny ip 192.168.1.0 0.0.0.255 192.168.9.0 0.0.0.255 access-list 105 deny ip 192.168.1.0 0.0.0.255 192.168.48.0 0.0.0.255 access-list 105 permit ip 192.168.1.0 0.0.0.255 any ip nat inside source static tcp 192.168.1.241 25 interface Dialer1 25 ip nat inside source static tcp 192.168.1.241 143 interface Dialer1 143 At the risk of answering my own question, I resolved this outside the Cisco realm. I bound a secondary ip address to mail server 192.168.1.244, changed the port forwards to use it while leaving all the local and IPSec traffic to use 192.168.1.241 and the problem was solved. New port forwards. ip nat inside source static tcp 192.168.1.244 25 interface Dialer1 25 ip nat inside source static tcp 192.168.1.244 143 interface Dialer1 143 Obviously this is a messy solution and being able to fix this in the Cisco would be preferable.

    Read the article

  • Multiple mouse settings on laptop?

    - by Jonas
    I'm wondering if this is possible. I use a macbook, running windows 7...when I don't have an external mouse connected, I leave the left/right settings of the buttons to the default. But when I plug in a mouse, I change that setting (since I use the mouse left-handed). When I unplug the mouse, I would like it to revert to the "unplugged" setting. Is there a way to get windows to remember mouse settings based on which device it's using?

    Read the article

  • Configuring Postfix with other SMTP provider

    - by Eduard Luca
    I want to use SendGrid as my email sending service, but want to also use Postfix's internal queue mechanism to manage the emails sent through Sendgrid. So basically what I want to do is to configure Postfix to send emails through Sendgrid's SMTP, and I will configure my app to send the emails using the local Postfix. My question is, how can I configure Postfix to use an external SMTP? Looked here but didn't see anything useful.

    Read the article

  • Accessing webserver behind cheap router

    - by malfist
    I have a trendNET wireless/wired router, and inside the LAN I have a webserver on 192.168.10.103:80. Does anyone know how I can access the webserver from outside the LAN? I setup a "VirtualSever" to portforward publicIP:8080 to 192.168.10.103:80, but it never loads. Port scanning the external IP shows the port as "filtered" on the router, and from the inside, it shows 192.168.10.103:80 as open. Does anyone know how I can make this work?

    Read the article

  • Why is Wifi data transfer is slow?

    - by Ali Azam Rana
    I have a wifi router which was attached with my modem, and the pc was connected to the wifi router through an ethernet cable. Yesterday I moved my modem and router to another room and connected my PC with wifi through an external wifi usb dongle (tp-link tl-w722n). I noticed that the file transfer speed from my cell to PC via wifi is greatly affected. I am not clear why is this happening because although PC is now connected through wifi but the dongle supports more than 54Mbps which is still enough.

    Read the article

  • How to recycle/reuse/continue Time Machine for a new Mac?

    - by bmargulies
    I have been backing up a MacBook Pro to an external hard disk with Time Machine. I got a new laptop, used the firewire connector to pull the universe across to it, and started it up. It does not want to just pick up where I left off with the backups; it wants to start a new backup sequence and thus I need a ton of additional disk space. Does anyone know a way to force it to just incrementally back up to the existing backup set?

    Read the article

  • zimbra server server not sync with ldap server

    - by shreedhar.bh
    Please help me out I am intermediate on linux, 1) I do have zimbra mail server on ubuntu with ladap server and external openldap server in internal location 2) last weak we got renewed the SSL certificate on Zimbra server 3) after renewed the SSL certificate with 10 years in Zimber server its not able to sync the ladap details with internal OpenLdap server Please help me to fix this issue In advance thanks Regards Shreedhar.BH

    Read the article

  • Transferring dmg files from a PC to an Apple

    - by Lee Carlton
    Hi all, I have dmg files on my computer that I need to put on my friends new macbook. When I try to put the files on an external hard drive it says that they are too large to transfer (each file is about 8 gigs). Just trying to figure out the best way to do this transfer. We started doing it with an ethernet cable last night, and transferred about 8 gigs over the course of a couple of hours.

    Read the article

  • OpenWRT based gateway with dnsmasq and internal server with bind

    - by Peter
    I have router based on OpenWRT which has dnsmasq 2.59. Inside my local area network I have a NS server bind. This server has internal and external views for a couple of my domains. My router forwards port 53 TCP and UDP from outside IP (router WAN) to this server. For the external clients everything works fine. In order to organize the internal view, I decided to add the exception to /etc/dnsmasq.conf server=/mydomain1.com/192.168.1.1 server=/mydomain2.com/192.168.1.1 server=/mydomain3.com/192.168.1.1 (192.168.1.1 - IP address of the NS server) According to dnsmasq manstrong text: More specific domains take precendence over less specific domains, so: --server=/google.com/1.2.3.4 --server=/www.google.com/2.3.4.5 will send queries for *.google.com to 1.2.3.4, except *www.google.com, which will go to 2.3.4.5 this domain name with all the sub-domains is supposed to be forward to my NS server. Everything works (SOA, NS, MX, CNAME, TXT, SRV etc.) except for A-record: # nslookup -type=a mydomain1.com Server: 192.168.1.100 Address: 192.168.1.100#53 *** Can't find mydomain1.com: No answer 192.168.1.100 - IP address of my router (dnsmasq) However, I can get the answer for the TXT-record query: # nslookup -type=txt mydomain1.com Server: 192.168.1.100 Address: 192.168.1.100#53 mydomain1.com text = "v=spf1 include:mydomain1.com -all" When I just specify the local IP of my NS server (direct access to the server without using dnsmasq) then the results are: # nslookup -type=a mydomain1.com 192.168.1.1 Server: 192.168.1.1 Address: 192.168.1.1#53 Name: mydomain1.com Address: 192.168.1.1 There is a similar situation with the MX-record: C:\>nslookup -type=mx mydomain1.com Server: router.lan Address: 192.168.1.100 mydomain1.com MX preference = 10, mail exchanger = mail.mydomain1.com mydomain1.com nameserver = ns.mydomain1.com mail.mydomain1.com internet address = 192.168.1.1 ns.mydomain1.com internet address = 192.168.1.1 C:\>nslookup -type=a mail.mydomain1.com Server: router.lan Address: 192.168.1.100 *** No address (A) records available for mail.mydomain1.com This is a dig result: # dig +nocmd mydomain1.com any +multiline +noall +answer mydomain1.com. 86400 IN SOA ns.mydomain1.com. hostmaster.mydomain1.com. ( 121204007 ; serial 28800 ; refresh (8 hours) 7200 ; retry (2 hours) 604800 ; expire (1 week) 3600 ; minimum (1 hour) ) mydomain1.com. 86400 IN NS ns.mydomain1.com. mydomain1.com. 86400 IN A 192.168.1.1 mydomain1.com. 604800 IN MX 10 mail.mydomain1.com. mydomain1.com. 3600 IN TXT "v=spf1 include:mydomain1.com -all" When I try to ping: # ping mydomain1.com ping: cannot resolve mydomain1.com: Unknown host Is it a bug of dnsmasq 2.59? How to manage this problem?

    Read the article

  • Remembering window's location and desktops on Mac OS X

    - by Daniel Cukier
    When I use my Mac, I like have a standard windows organization to do my Work: I put 4 consoles opened side by side on console 1 I put Safari in other Mail and iCal in another TextMate on other etc And depending on the work I do, I'd like to have different window configuration. And when I have a external monitor connected, I need another configuration. Is there any tool to make this? What is the best way to do it?

    Read the article

  • USB Ports on the NETGEAR ReadyNAS NV+ 4-Bay 4TB

    - by Kyle Brandt
    I have several external USB drives currently (1x500GB and 2x1TB). If I were to purchase the ReadNAS NV+ 4TB NAS, would I be able to: Possibly add even more USB drives to it with a HUB? Export NFS shares of the data on the USB drives keeping the current ext3 fs and data on the USB drives intact? Does anyone have any caveats with this system they feel I should know?

    Read the article

  • Why does a hard disk suddenly look to Windows as if it "needs to be formatted"?

    - by pufferfish
    This is more of a theory question, but what are the reason(s) for a disk to suddenly cause Windows to start saying it "needs to be formatted"? It happens to an IDE disk that I have in a cheap external enclosure, and I can usually get most of the data back by using software like recuva. It's now happened to an internal disk I have. I'm not looking for software to fix this (although links would be appreciated), but rather a low-level explanation as to what gets corrupted on the disk.

    Read the article

< Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >