Search Results

Search found 9462 results on 379 pages for 'laptop repair'.

Page 132/379 | < Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >

• Why did MAC-Adress Cloning Fix My Router?

  - by FranticPedantic

  I have a Belkin router, and about a year ago, I suddenly lost my internet connectivity from Comcast. The internet worked fine when I plugged it right into my laptop, so I just ignored it. When I moved to another apartmnet I eventually took the dive and called tech support. The tech told me to clone my MAC address which completely fixed the issue. Now I know what a MAC address is and I've read what MAC cloning is. What has bothered me since is that I don't see how this fixed the issue. As I have understood MAC address cloning, it has the router pretend it has the same MAC address as my computer. Here is why I don't understand why this fixes my issue: I have used several different computers with this router. Cloning the MAC address fixed it for ALL of my computers. The laptop I first used with my ISP was not the one that I eventually had connected when I cloned the address. Furthermore, I didn't have any problems for quite some time after I stopped using the first computer. It wasn't like the internet suddenly stopped working when I changed which laptop I was using Now it occurred to me that maybe there was some sort of expiration? Except... Which MAC address did it clone? It was just an option in the router administration page. Did it just pick whichever computer was connected to it? If my ISP still wanted the MAC of my first computer, how did some other computer's fix it? As mentioned earlier, why did this problem seemingly stem from nowhere? Anyway, I don't have any current problems so this is more just out of general curiosity. If anybody can explain it, it would be appreciated!

  Read the article

• Linux error when resume from RAM

  - by TuxPotato

  The last two times that I have resumed my laptop from sleep, it has hung and given me this set of errors: [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 1sec aborting [drm:atom_execute_table_locked] *ERROR* atombios stuck executing E692 (len 460, WS 0, PS 4) @0xE6D3 hda_intel: azx_get_responce timeout, switching to single_cmd mode: last cmd=0x01170700 ata6: softreset failed (device not ready) ata4: softreset failed (device not ready) [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 1sec aborting [drm:atom_execute_table_locked] *ERROR* atombios stuck executing E692 (len 460, WS 0, PS 4) @0xE6D3 The last two messages repeat two more times. The first time this happened, Linux's Magic SysRq worked and did a soft reboot, and after that everything was fine till it went to sleep again. It wakes up and gives me this. Here are the laptop stats: Toshiba Satellite L455D-S5976 AMD Sempron SI-42 Processor 2GB DDR2 RAM HD TruBrite Display ATI Radeon Graphics (integrated) Running Ubuntu 10.10 32 bit I'm not sure about the hard drive, but its a 250GB drive with one NTFS partition, two Hidden NTFS, one Linux Swap, and one Ext4. Can someone tell me whats wrong with my laptop? NOTE: This only happens when I close the screen. My computer doesn't go to sleep with the screen open.

  Read the article

• Windows Vista will not boot; the file header checksum does not match the computed checksum

  - by Magnus

  Right out of the blue, my wife's Sony Vaio stopped booting. This, not so fun, error message displays immediately after POST: The system cannot boot. The file is possibly corrupt. The file header checksum does not match the computed checksum The repair option on the Vista DVD says everything is fine and dandy, it couldn't be more happier or more clueless... Any ideas? Update: CHKDSK reports no issues. CHKDSK /r reports no issues. (Heck, both Windows Repair and CHKDSK could just as well tell me that I have won on lottery or that the earth is flat... ) Some have reported that a mem diagnostic could help, but for me the mem diag has just ran through 5 passes. It doesn't seem to help. According to Sony, pressing F10 should bring up the restore menu, but it doesn't, the error pops up straight after Bios POST. It seems that this error is first in line of all options at this point, and is doesn't put a smile on my face. I have attached an external USB drive and copied all user data/documents to it. I feel an OS re-install is around the corner.

  Read the article

• BSOD trying to migrate Windows XP from a physical to a virtual machine

  - by pauldoo

  I am attempting to migrate a Windows XP Home installation from a physical machine to a virtual machine. The physical machine has two hard disks; the first is 250GB containing the "C:", the second is 1TB containing "D:". I'd like to create a new virtual machine stored on the D:, which is a copy of the Windows XP Home installation that is currently on the C:. (This will leave the 250GB drive clear for me to install a fresh copy of Windows 7, and still be able to access the old XP installation if necessary.) The first method I tried was to follow the instructions here: http://www.virtualbox.org/wiki/Migrate_Windows I booted up from an Ubuntu Live CD in order to execute the Linux commands whilst the Windows system wasn't running. With this method the virtual machine would always blue screen on startup with a "STOP 0x0000007B" message. The instructions above say to try a "repair install" using the Windows XP disc. Unfortunately for me my XP disc is scratched and will not boot so I was unable to try a repair install. The second method I tried was to use "VMWare Converter Standalone Client". This tool executed without any errors, but again produced a virtual machine that blue screens on startup with the same "STOP" message. Are there any other methods to move the Windows XP installation into a virtual machine? I think next I will try some more manual process to create the cloned virtual machine. I think I will try installing a fresh copy of Windows XP to a virtual machine, then once that is booting OK I will ntfsclone the source C: partition over the top. Perhaps this will fix the booting problems if the issue is related to the MBR or partition table in some way.

  Read the article

• How to update the hard disk device drivers for a ghosted hard drive image so it can run on different hardware: Ultra ATA > SATA

  - by rism

  I've ghosted a Winxp machine from one laptop with Ultra ATA drive, and would like to set it up on another laptop as a multiboot option on another hard driver with a SATA drive. I can install the partition fine but if i make it active and try to boot it it blue screens. The blue screen is so fast i cant even read it, other than to make out it's saying "something", im picking probably hard drive as it goes through POST fine. So basically i would like to boot into my Win7 OS, and then somehow manipulate the XP partition to use updated drivers for the new hard drive/laptop so that i can then at least boot into the XP OS on the new machine and update all the other drivers in safe mode or whatever to get it to run. I assume someone is going to tell me to just do a fresh install, but that kinda defeats the purpose of ghosting at this point. There is a significant amount of personalisation, development setup on the XP machine that i would like to just transfer as is. As it stands ive invested minmal time in getting it to run, just a ghost and recovery and then a blue screen boot or two, so its still well worth it to me, time wise to try this way. Thanks.

  Read the article

• Play audio over network with Windows 7?

  - by Josh

  I have a unique situation where I'd like to stream audio (ALL audio, not just mp3s, etc) from my laptop to another computer over the network. I live in a studio apartment and my laptop is my main computer but I'd like it's audio to play on my htpc with a nice stereo system. Since it's a studio, both computers are in the same room so I don't want 2 sets of speakers. I want my computer to directly play back through the stereo. I used to do this with pulseaudio but my job now requires that I run Windows full time. I'm aware of Shoutcast and other similar streaming solutions but I don't want any transcoding done. It's a waste of CPU and not to mention my laptop fans, and I don't mind the network bandwidth that uncompressed audio requires. Is there a way to run Shoutcast without encoding? Also, I know that Windows Remote Desktop can play audio over the network pretty easily. Is this part of .Net that I could just code a simple app that streams the audio without RD'ing in? I also don't want to run it over a physical wire. :)

  Read the article

• Get details / solve issue with a kernel panic?

  - by Joseph

  I have a Lenovo T430 running Linux Mint 13 (MATE): joseph:~$ uname -a Linux joseph-T430-LM 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I installed Mint immediately after getting the laptop about two weeks ago, and have noticed that about once a day, the computer will completely freeze up- I can't use Ctrl+Alt+Backspace to restart X, I can't use Ctrl+Alt+F1 to get a text only terminal, can't move mouse, can't type, and if any music was playing it just gets stuck in about a 1-second loop. There is a Windows partition, but I haven't had any issues in Windows. I couldn't find a common thread between the freezes, they were seemingly random (sometimes right after I clicked the mouse, sometimes not; sometimes with Pandora/flash being used, sometimes not, etc). I assume they're kernel panics since it completely locks up, but the laptop doesn't have a capslock or scroll lock LED. It is on a dock and I do have a USB keyboard, but the scroll lock/capslock lights do not flash when it happens (not sure if this is indicating its not a kernel panic, or if the kernel panic just wouldn't illuminate the LEDs on a usb keyboard attached to a laptop dock). This was annoying but not terrible. However, I've found a way to reproduce it. I have a particular CSV file that when I open up in LibreOffice Calc and scroll around, the same thing happens- complete lock up. I really need to use this file, so I'd like to fix the issue, but at the least it's given me a test case to work with. So, having a case where I can cause this issue, what can I do to better find out what's going on? I've looked in /var/log/syslog but haven't found anything seemingly useful. Any thoughts?

  Read the article

• Server 2003 crashing intermittently, want to transfer function to other DC

  - by user1305332

  I have a Win2003R2 server that is intermittently crashing after some virus were introduced. I'm sure all virus have been cleaned thanks to Malwarebytes (were using McAfee - useless). When it crashes you can't login (local or remote) but can still access files remotely and ping it. After a while even file sharing stops and have to kill power to restart it (no BSOD) I need to either fix it (tried to reinstall SP2 and I tried to reinstall windows in repair mode but the repair option was not available when I booted from installation disks) or move it's functionality to another DC (another 2003R2 server). The server that's crashing is old with SCSI drives while the new server uses SATA drives and faster so it seems like a good idea to just transfer roles and ditch the old box. Finding replacement SCSI drives looks expensive if they ever fail. What would I need to transfer roles. If I just move the 5 FSMO roles and copy over the file shares. Would the new server have enough to run without the old server? Never done something like this, just want some tips. Thanks.

  Read the article

• what's the difference between a Volume and a Partition in Windows 7 diskpart

  - by user170232

  I was trying to follow the Intel guide for setting up iRST (Intel Rapid Start Technology) on my new laptop. The Intel manual says you need to create a *Volume that is as big or bigger than your available memory, set it to a specific id (id=84), then go into the iRST tool and adjust some settings. Looking at the disk manager on the laptop, I see there is already a Partition labeled as "Hibernation Partition" which is a little bigger than the memory in my system. So it looks like iRST was already set up...BUT, it's a Partition, not a Volume. Here's what the manual says to do: (from: http://download.intel.com/support/motherboards/desktop/sb/rapid_start_technology_user_guide.pdf) diskpart list disk select disk x (where x is the disk to use, there's only one disk in this laptop) create partition primary size=X000 (where X000 is the size to create) detail disk (which lists details for the disk. This is where i get hung up) select volume Z (where Z is the *partition you created previously) ** it says the 'detail disk' command will list the volume #, but it doesn't. ** 'detail disk' only lists two "volumes" for Recovery and OS. ** if i do 'list partition', i see the 8 GB *partition labeled as "Hibernation Partition") ** so I can't continue with the following steps: set id=84 override exit The reason I went looking for the manual is because when iRST is enabled in the BIOS, the system won't resume from sleep. When it's disabled, it works fine, but the system goes into (legacy?) Hibernation mode and takes a while to come out of Hibernation. the iRST is supposed to resume from deep sleep very quickly. So, what's the difference between a Volume and a Partition? Should I delete the Hibernation Partition and create a Hibernation Volume? Anyone have any ideas? (if it matters, this is on a Dell XPS 13 with BIOS A08) Thanks! J

  Read the article

• Boot loop that I cannot bypass

  - by lonewaft

  Recently, on a laptop that I've used for a while, I had a strange issue where OS files were corrupted (device manager) and Windows 8 was hung after the login screen, so I reinstalled Windows 7 over the existing Windows 8 installation, and it worked for a couple days. Today, when I tried to use my laptop, it was stuck on a boot loop. Right after the BIOS screen, it would show a flashing underscore, then restart the computer, again and again until I removed the battery. I tried booting to a windows 7 install CD, but the same flashing underscore - reboot sequence happened when I tried. I tried moving the boot priority around (HDD first, CD/DVD first, even USB first) but nothing changed. After about an hour of tinkering with it, I listened to the HDD sounds, and it sounded like the HDD was trying to spin up, but failing (whining noise increasing in frequency that stopped and started in sync with the system restarting). I am planning to replace the HDD, but I'm still confused as to why a faulty HDD would stop the laptop from booting to my install DVD (tried it on a different computer, it booted from that CD fine). Anybody here have any idea why this might be happening?

  Read the article

• Dell Inspiron 1564 overheating but fan not switching on, how to diagnose?

  - by Smugrik

  I've got a Dell Inspiron 1564 laptop that is about one and a half years old. Since about a week, the laptop started to overheat, causing it to switch off unexpectedly... The cpu fan is working erratically, it can start to spin for a while, doing its job and cooling down the cpu before it stops, but then the temperature goes up, and the fan doesn't reacts, once the temperature reaches a critical point (over 85 celsius, checked with speedfan...), the laptop switches off... I already cleaned the vents and fan from dust, to no avail, and it was actually quite clean anyway. Drivers and bios are up-to-date, no crapware was ever installed on this machine. I don't know how to diagnose the problem, could it be the temperature sensors that sends wrong information, so the fan doesn't reacts? but then I believe the computer wouldn't detect the overheat and stop... Is there a way I can pin point the problem? Maybe some low-level diagnostic tools to check functionality of sensors and fans??? The warranty is already over so any suggestion would be welcome. Thanks!!

  Read the article

• Mac OS X Client With Static DHCP Assignment Requests Wrong IP via Option 50

  - by Starchy

  I have a number of Mac (and a few Linux) laptops getting DHCP from a Force10 layer 3 switch, the only DHCP server on the subnet. There's a global dynamic pool, and for each full-time employee's laptop I have a single IP static pool set by MAC address. One and only one of the clients, running OS X 10.7.5, consistently fails to get a static assignment. The MAC address in the static pool definition has been carefully re-checked. Running tcpdump on a mirrored port when the laptop connects, I see that it is specifically requesting 10.100.0.252 (a dynamic address): 11:32:10.108280 IP (tos 0x0, ttl 255, id 28293, offset 0, flags [none], proto UDP (17), length 328) 0.0.0.0.bootpc > broadcasthost.bootps: [udp sum ok] BOOTP/DHCP, Request from 3c:07:54:xx:xx:xx (oui Unknown), length 300, xid 0x1399da89, Flags [none] (0x0000) Client-Ethernet-Address 3c:07:54:xx:xx:xx (oui Unknown) Vendor-rfc1048 Extensions Magic Cookie 0x63825363 DHCP-Message Option 53, length 1: Request Parameter-Request Option 55, length 9: Subnet-Mask, Default-Gateway, Domain-Name-Server, Domain-Name Option 119, LDAP, Option 252, Netbios-Name-Server Netbios-Node MSZ Option 57, length 2: 1500 Client-ID Option 61, length 7: ether 3c:07:54:xx:xx:xx Requested-IP Option 50, length 4: 10.100.0.252 Lease-Time Option 51, length 4: 7776000 Hostname Option 12, length 10: "host-name" END Option 255, length 0 PAD Option 0, length 0, occurs 8 I haven't been able to find any extra system prefs or unusual software on the laptop. Disabling the interface and rebooting or temporarily setting the IP manually both fail to make any difference. Any suggestions appreciated.

  Read the article

• can't ssh within LAN, but can connect from outside

  - by Patrick B.

  A strange issue: I have a desktop running Ubuntu 10.04 behind a Netgear WNR1000 router performing NAT. I would like to be able to ssh into the desktop from my laptop (running Windows 7 and Cygwin). When at home, both the desktop and the laptop are connected by wireless (the desktop is in a different room from the router). sshd seems to be running fine, since ssh localhost from the desktop works without trouble. Also, ssh my.ip.address from my laptop when it is not behind the router works fine (I am forwarding port 22 on the router to my desktop). However, ssh same.ip.address from within the LAN fails with "Connection refused". ssh 192.168.local.ip.address fails with a different message, "Connection timed out". I can connect if I first ssh to a machine outside the LAN. So far I haven't found anything with Google because with the search terms that seem like they would be relevant, the vast majority of people have the opposite problem - i.e., they can't connect from outside the LAN but can connect within it. I can port forward through a remote server when I'm at home, but this seems like a totally absurd way to connect two computers on the same home LAN. I have already tried stopping and starting sshd on the desktop. Any thoughts?

  Read the article

• Bugzilla email issue

  - by xian

  My bugzilla system keep hit the following error: There was an error sending mail from '[email protected]' to '[email protected]':Can't send data I think that is some problem with my setting and configuration. First is the urlbase I have tried setting it to bugzilla.example.com, and http://127.0.0.1:81/, and http://10.0.0.236/ (My laptop IP address, I use this laptop to set up bugzilla) but the error still persists. Actually what should I put in the urlbase field? Parameter = Email Under mail_delivery_method, i choose SMTP. Under mailfrom, I put bugzilla-daemon. smtpserver, I tried leaving it blank, or setting it to 220.181.12.12 before, but could not solve my problem For my sql, the following is the data and command I used: C:\mysql\bin>mysql --user=root -p mysql Enter password: 1234 (When I install mysql into my laptop, it ask me to key an username and password, i have key in username as 'cvuser' and password as '1234', but here never ask me to key in any username) Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 1 Server version: 5.5.15 MySQL Community Server (GPL) mysql> GRANT ALL PRIVILEGES ON bugs.* TO 'bugs'@'localhost' IDENTIFIED BY '123456'; Query OK, 0 rows affected (0.03 sec) In C:\Bugzilla\localconfig, I put the following info: # # How to access the SQL database: # $db_host = "localhost"; # where is the database? $db_port = 3306; # which port to use $db_name = "bugs"; # name of the MySQL database $db_user = "bugs"; # user to attach to the MySQL database # # Enter your database password here. It's normally advisable to specify # a password for your bugzilla database user. # If you use apostrophe (') or a backslash (\) in your password, you'll # need to escape it by preceding it with a \ character. (\') or (\\) # $db_pass = '123456'; Can someone tell me where my mistake is? I have googled for this issue for few days but still cannot find the solution.

  Read the article

• What is the latest on Microsoft Expression Studio licensing?

  - by DanM

  In the past, there's been an issue with Microsoft not allowing you to deactivate an Expression Studio key. Basically, you get two keys per license. If you assign both keys (say one to a desktop and one to a laptop), then you upgrade to a new machine (say you replace your laptop or upgrade some of the hardware), you have to buy a new copy of Expression Studio ($600 for Ultimate). This seems ludicrous to me, and I'm wondering if anyone knows if this policy is still in place. I can't seem to find a EULA online anywhere, so I don't know where to find this information. I know my laptop is due for replacement soon, and I want to know if I'm going to have to sink $600 into a software product I already purchased. For background, please refer to this thread on the Microsoft Expression forums: http://social.expression.microsoft.com/Forums/en-US/general/thread/da5587bc-b098-4c6a-9a56-af3608d940d0 Note that this thread is locked. Microsoft doesn't seem to want people to discuss this. This is one reason I'm posting here rather than on that site.

  Read the article

• How to transfer Windows Vista disk image to new machine

  - by Mike Hobbs

  I'm trying to upgrade a user's machine to some better hardware. I know of Easy Transfer, but I'd rather not have to reinstall all the programs that are already present. (Some of which are no longer available, anyway). Instead, I'm trying to transfer the entire disk image from one machine to the other, but I ran into issues. If I copy the partition image over to the new machine using Clonezilla, I get errors on boot saying that I need to insert the Vista install disk and run repair. I do that, but it then says that it is unable to repair whatever it is that's broken. Next, I tried to sysprep the old machine before creating the image, but sysprep fails saying that it encountered some sort of system error. Should it be possible to sysprep any arbitrary machine, or does it only work on a relatively clean install? Could it be a missing driver that is tripping me up? The new machine is a fairly stock desktop that shouldn't need any special drivers beyond what's already present in standard Vista. Are there any foolproof methods for doing this sort of thing?

  Read the article

• Prevent Roaming profiles from syncing certain elements

  - by user29919

  Hello everyone, I'm somewhat new to the Server 2008 front, and I'm afraid I've hit my first snag: I've set up roaming profiles, and they appear to be working too well. Is there a way to limit, ideally on a folder/object basis, what gets synced with a roaming profile? What I'm trying to do is: 1) stop my roaming profile from syncing desktop layout - I run a dual-screen desktop and a laptop, and it's really annoying to have to reposition everything after logging onto the laptop, because it forces everything onto one screen. 2) stop it from syncing registry variables - specifically, I want Visual Studio to load different setting files on each computer. Currently, the variable that contains that path is getting synced whenever I log in, so I get the settings from whatever box I last logged out from. 3) stop syncing the start menu - this one's not as big, but I'm noticing 'program not found' icons even for programs that are installed. they work when I click them - they just look ugly. I'm running Windows SBS 2008 x64 with two Win7 clients (x86 Pro, and X64 Ultimate). Is there a simple way to do that? Or am I trying to work too much against what roaming profiles are designed for? I could, of course, set up different profiles for the desktop and laptop, but that seems to defeat the point of roaming profiles entirely... Thanks in advance! Any help will be much appreciated =)

  Read the article

• Windows XP dual screen problems, user account related

  - by Chris

  I have had this issue with a few laptops now and it looks like it is some sort of user account problem. Specifics of the system are: Dell Laptop Windows XP Pro SP3 Non-domain member computer DLP Projector connected to laptop via VGA I use this setup almost daily to do presentations, always the mirrored display mode where I can see on the laptop monitor the same thing that is displayed on the projector. Today, when I boot up, I get the mirrored display at the login screen, but after I log in, it switches to Extended Desktop (like two desktops side-by-side). Fn+F8 just cycles through all the normal settings except the mirrored display. I created a new user account on the computer and it performs normally. Mirrored display works as normal. I have run into this about 4 times now and it always can be solved by creating a new user account on the computer, and then all is well. I would like to either: 1. Find a way to reset the customized settings for a specific user account which would hopefully make this go away, or 2. Find the specific setting that causes this so that I can easily fix it when the problem comes up. Creating new user accounts is kind of a pain and a easy fix must be out there somewhere.

  Read the article

• Windows 7 just deleted 4 days of work wtf!?

  - by Mat

  Hey! I'm just a bit about to freak out. I just finished a project and rebooted my computer. It didn't want to boot anymore so I had to use the windows 7 system repair option. it run for a minute and then booted up. Now most of my sourcecode from the last 4 days of work is gone! background: sometimes (most often after installing new software) my notebook won't boot up anymore. It will just show the little Win 7 flag, but not read from the harddisk anymore. If I hardabord and reboot then, it asks me whether to start windows normally (which won't work) or to run "windows startup repair". If i run it, it does some stuff for about two or three minutes and then I can boot windows again. Usually after this, .exe files i added to the computer during previous days are gone - but other files so far were not touched. But now, after this happened, a whole bunch of ".as" (ActionScript source files) from my project are gone!! does anyone know where and whether there's a way to recover them?? please help! Thank you!

  Read the article

• How do I configure a new (non-OS) raid device under Windows 7?

  - by GregH

  I recently installed 3 new 1TB drives in my Windows 7 (64 bit) system. These are in addition to the 10k rpm disk that I already have running the Windows 7 OS. My intent is to create a RAID 5 volume with the 3 disks. I don't seem to have a problem configuring the bios and creating the resulting 1.9 TB RAID volume. I run in to the problem when I try booting in to Windows. I get a quick flash of a blue screen and then am prompted by windows to do a repair. It tries to repair and then reboots. This sequence lasts indefinitely. If I re-configure the bios back to non-RAID (ACHI) then windows boots fine. The strange thing is that the 1.9 TB volume I configured through the bios actually shows up in windows! Strange since the motherboard is not set up with RAID. I assume that I somehow have to install the RAID drivers from the mobo manufacturer. How do I do this? Is the reason I'm getting the blue screen a result of not having the RAID drivers installed? It's strange because I can find plenty of documentation on how to set up RAID and do a fresh install Windows on to the RAID device, but nothing on how to set up a RAID device on an already running system. Advice is appreciated.

  Read the article

• Some URLs fail to load on Windows web portal

  - by jpolache

  I’m working in a large data center and have been assigned to troubleshoot and issue with a windows (IIS) web server that acts as a portal for a customer of the data center. This portal server is on a DMZ at the local data center. I don’t have access to the portal desktop and am relying on an off-site administrator to work with me to do testing and report the condition of the portal. He tells me there are no software firewalls or other filtering configured. While most of the remote web pages work fine, several of the URSs the portal is suppose to serve up fail to load. I had wireshark installed on the portal system and had a capture taken of one of the failures. I used IE to access one of the remote web servers at issue. I could see the TCP SYN-ACK coming back from the remote server, but after several HTTP GETs fail to get a response the portal server sends a reset. The webmaster of the remote web server assures me that no sites are being blocked. I had a capture taken outside the local firewall, so there should be no issue there. Another tech set up a laptop and used the IP address of the portal (we took the portal off-line for the test). The laptop loads the URL as expected. I tried having Firefox loaded to make sure that the HTTP GET was not mal-formed. Same failure as with IE. So, it seems it is not the remote web server or the network, because there was no problem with the laptop. At this point, I’m not sure what other questions to ask or tests to do.

  Read the article

• Problem setting up HP PhotoSmart C4783

  - by ProfKaos

  I am trying to get several PC's on a network to connect to my client's new wireless printer, the C4783. I initially installed the whole HP 'tsumami of software' the comes with the printer onto my laptop, connected to the printer over USB, and corrected it's networking config. My laptop now also can connect to and print on the printer over the wireless network, as is intended for all PC's. However, when I try and install the HP software on my client's netbook, the HP software cannot find the printer. Firewall was turned off during this time, so doesn't play a role. I tried re-installing all software, but I initially only got a "Repair" or "Uninstall". Choosing Uninstall triggers a lengthy process that ends with a sudden and forceful restart, after which the same "Repair" or "Uninstall" choices are present. Looks like uninstall doesn't. Any suggestions as to how I can begin diagnosing why my laptop has no problem connecting to the printer, but two others do? Wireless is unsecured, and no, nobody has to know where I am right now. :-)

  Read the article

• Gray Progress Bar in Macbook Boot caused by Partition Fault

  - by Konstantin Bodnya

  Here's my problem: When I try to load my macbook it shows the gray progress bar. It takes a while to fill the whole progress and after it macbook just shuts down. I tried to boot from recovery partition and run Disk Utility to repair it. Disk Utility showed my "Macintosh HD" in a gray color and failed to repair it. I thought all my data was lost, but then I tried the following: So I booted into ubunto from live usb and it successfully mounted my macintosh hd hfs+ partition. Parted shows me the following partitions on my disk: Disk /dev/sda: 500GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 20.5kB 210MB 210MB fat32 EFI System Partition boot 2 210MB 499GB 499GB hfs+ Macintosh HD 3 499GB 500GB 650MB hfs+ Recovery HD Seems legit except for FAT32 for EFI System Partition. Since all my data is okay and backed up what should I do to recover the system. I don't really want to reinstall all the system though I believe there's a command to make it allright in linux. Thank you everyone!

  Read the article

• Missing boot files in Windows 8

  - by Alex F. Sherman

  I had a partition with Windows 8 Release Preview, Windows' System Reserved partition and the empty space of the beginning of disk. I moved two partitions to the beginning of disk using Ubuntu Live CD and GParted. After that, the Windows Loader didn't boot and throw an error about missing files. I fixed it using the commands: bootsect /nt60 sys /force /mbr bootrec /rebuildbcd bootrec /fixboot bootrec /fixmbr When I used "Automatic repair" option from "Advanced boot" menu, it throw an error like: Windows can't fix your boot problems. For more information see file C:\Windows\System32\LogFiles\Srt\SrtTrail.txt In this file I found a description of the system repair actions and at the end of file: Boot status indicates that the OS booted successfully. Now, when I use the Advanced boot menu from Windows 8 (PC settings - General - Advanced startup) I receive an error: Restart your PC to try again. It looks like something didn't load correctly. Restarting might fix the problem. If this happens more than once, you might also be able to find help by searching online for the specific error code. Erorr code: 0x8007090. 0x80070490 is the error code ERROR_NOT_FOUND. What are the missing boot files and how can I restore them? List of files in System Reserved Partition: B:\bootmgr B:\BOOTNXT B:\Boot\BCD B:\Boot\BCD.LOG B:\Boot\BCD.LOG1 B:\Boot\BCD.LOG2 B:\Boot\BOOTSTAT.DAT B:\Boot\Fonts B:\Boot\memtest.exe B:\Boot\qps-ploc B:\Boot\Resources B:\Boot\Resources\bootres.dll and many *.mui and *.ttf files.

  Read the article

• MediaWiki migrated from Tiger to Snow Leopard throwing an exceptions

  - by Matt S

  I had an old laptop running Mac OS X 10.4 with macports for web development: Apache 2, PHP 5.3.2, Mysql 5, etc. I got a new laptop running Mac OS X 10.6 and installed macports. I installed the same web development apps: Apache 2, PHP 5.3.2, Mysql 5, etc. All versions the same as my old laptop. A Mediawiki site (version 1.15) was copied over from my old system (via the Migration Assistant). Having a fresh Mysql setup, I dumped my old database and imported it on the new system. When I try to browse to mediawiki's "Special" pages, I get the following exception thrown: Invalid language code requested Backtrace: #0 /languages/Language.php(2539): Language::loadLocalisation(NULL) #1 /includes/MessageCache.php(846): Language::getFallbackFor(NULL) #2 /includes/MessageCache.php(821): MessageCache->processMessagesArray(Array, NULL) #3 /includes/GlobalFunctions.php(2901): MessageCache->loadMessagesFile('/Users/matt/Sit...', false) #4 /extensions/OpenID/OpenID.setup.php(181): wfLoadExtensionMessages('OpenID') #5 [internal function]: OpenIDLocalizedPageName(Array, 'en') #6 /includes/Hooks.php(117): call_user_func_array('OpenIDLocalized...', Array) #7 /languages/Language.php(1851): wfRunHooks('LanguageGetSpec...', Array) #8 /includes/SpecialPage.php(240): Language->getSpecialPageAliases() #9 /includes/SpecialPage.php(262): SpecialPage::initAliasList() #10 /includes/SpecialPage.php(406): SpecialPage::resolveAlias('UserLogin') #11 /includes/SpecialPage.php(507): SpecialPage::getPageByAlias('UserLogin') #12 /includes/Wiki.php(229): SpecialPage::executePath(Object(Title)) #13 /includes/Wiki.php(59): MediaWiki->initializeSpecialCases(Object(Title), Object(OutputPage), Object(WebRequest)) #14 /index.php(116): MediaWiki->initialize(Object(Title), NULL, Object(OutputPage), Object(User), Object(WebRequest)) #15 {main} I tried to step through Mediawiki's code, but it's a mess. There are global variables everywhere. If I change the code slightly to get around the exception, the page comes up blank and there are no errors (implying there are multiple problems). Anyone else get Mediawiki 1.15 working on OS X 10.6 with macports? Anything in the migration from Tiger that could cause a problem? Any clues where to look for answers?

  Read the article

< Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >