Search Results

Search found 8048 results on 322 pages for 'partial upgrade'.

Page 132/322 | < Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >

  • ASP.NET 4 Website Fails to Start on Your TFS 2010 Server?

    - by jdanforth
    Getting a “Could not find permission set named ‘ASP.Net’” error on your TFS 2010 server? It may have to do with the fact you’re trying to run ASP.NET as a child site of a SharePoint Web Site. The problem is described in the “ASP.NET 4 braking changes” site:   This error occurs because the ASP.NET 4 code access security (CAS) infrastructure looks for a permission set named ASP.Net. However, the partial trust configuration file that is referenced by WSS_Minimal does not contain any permission sets with that name. Currently there is not a version of SharePoint available that is compatible with ASP.NET. As a result, you should not attempt to run an ASP.NET 4 Web site as a child site underneath SharePoint Web sites.   There is a workaround you could try by setting this in your web.config, if you know what you’re doing: <trust level="Full" originUrl="" />

    Read the article

  • Technologies similar to Flash and Silverlight for Desktop apps

    - by M.A. Hanin
    Long story short: we use Flash as a partial GUI in our .NET desktop applications. Normally, this means that the Flash player control sits in some WinForm, playing a movie file. Changes in the real world are presented in the movie (e.g., a light-bulb turned on in the real world? a matching one will light up inside the Flash movie), and interaction with the instances in the movie will affect the real world (clicked the light-bulb? the light bulb in the real world will turn on). My question is: which technologies / products can offer me similar capabilities? Of course, I'm looking for something that can compete with Flash / Silverlight: animations, object-oriented scripting and design, powerful tools allowing the artists to design symbols conveniently, etc... static image objects won't cut it

    Read the article

  • Motorola Droid App Recommendations

    - by Brian Jackett
    Just as a disclaimer, the views and opinions expressed in this post are solely my own and I’m not getting paid or compensated for anything.     Ok, so I’m one of the crazy few who went out and bought a Droid the week it was released a few months back.  The Motorola Droid was a MAJOR upgrade in phone capabilities for me as my previous phone had no GPS, no web access, limited apps, etc.  I now use my Droid for so much of my life from work to personal to community based events.  Since I’ve been using my Droid for awhile, a number of friends (@toddklindt, @spmcdonough, @jfroushiii, and many more) who later got a Droid asked me which apps I recommended.  While there are a few sites on the web listing out useful Android apps, here’s my quick list (with a few updates since first put together.) Note: * denotes a highly recommended app     Android App Recommendations for Motorola Droid (Updated after 2.1 update) RemoteDroid – install a thin client on another computer and Droid becomes mouse pad / keyboard, control computer remotely PdaNet – free version allows tethering (only to HTTP, no HTTPS) without paying extra monthly charge.  A paid version allows HTTPS access. SportsTap – keep track of about a dozen sports, favorite teams, etc *Movies – setup favorite theaters, find movie times, buy tickets, etc WeatherBug elite – paid app, but gives weather alerts, 4 day forecast, etc.  Free version also exists.  (Update: Android 2.1 offers free weather app, but I still prefer WeatherBug.) *Advanced Task Killer – manually free up memory and kill apps not needed Google Voice – have to have a Google Voice account to really use, but allows visual voice mail, sending calls to specific phones, and too many other things to list AndroZip – access your phone memory like a file system Twidroid – best Twitter client I’ve found so far, but personal preference varies.  I’m using free version and suits me just fine. Skype (beta) – I only use this to send chat messages, not sure how/if phone calls works on this. (Update: Skype Mobile app just released, but uninstalled after few days as it kept launching in background and using up memory when not wanted.) *NewsRob – RSS reader syncs to Google Reader.  I use this multiple times a day, excellent app. (Update: this app does ask for your Google username and password, so security minded folks be cautioned.) ConnectBot – don’t use often myself, but allows SSH into remote computer.  Great if you have a need for remote manage server. Speed Test – same as the online website, allows finding upload/download speeds. WiFinder – store wifi preferences and find wifi spots in area. TagReader – simple Microsoft Tag Reader, works great. *Google Listen – audible podcast catcher that allows putting items into a queue, sync with Google Reader RSS, etc. I personally love this app which has now replaced the iPod I used to use in my car, but have heard mixed reviews from others. Robo Defense – (paid app) tower defense game but with RPG elements to upgrade towers over lifetime playing. I’ve never played FieldRunners but I’m told very similar in offering. Nice distraction when in airport or have some time to burn. Phit Droid 3rd Edition – drag and drop block shapes into a rectangle box, simple game to pass the time with literally 1000s of levels. Note this game has been updated dozens of times with numerous editions so unsure exactly which are still on the market. Google Sky Map – impress your friends by holding Droid up to sky and viewing constellations using Droid screen. wootCheck Lite – check up on daily offerings on Woot.com and affiliated wine, sellout, shirt, and kids sites.   Side notes: I’ve seen that Glympse and TripIt have recently come out with Android apps.  I’ve installed but haven’t gotten to use either yet, but I hear good things.  Will try out on 2 upcoming trips in May and update with impressions.         -Frog Out   Image linked from http://images.tolmol.com/images/grpimages/200910191814100_motorola-droid.gif

    Read the article

  • Name a Byobu session?

    - by Ashimema
    Is there a way to create identifiable Byobu sessions so that when I've got multiple sessions running, the byobu-select-session menu gives me a list of sessions I can recognize, as opposed to non-descript tmux port numbers? In an ideal world, it would be great to be able to both start a session giving it a name and to modify such a session to change a name if it's already running? Is this possible, how? Edit 1: Some further details: I'm using tmux as the backend and don't especially want to switch back to screen. I've now tried starting a session with byobu -S "Name" to no avail :-( Edit 2: Some discoveries: I've now discovered a partial answer in using tmux native commands: tmux rename-session <current-name> <new-name> renames an existing session and tmux new -s session_name creates a new names session. I'm surprised byobu -S "name" isn't liked to tmux new -s session_name for byobu with a tmux backend.

    Read the article

  • Ubuntu Extras keyring error

    - by Pawan Neupane
    Recently I got lots of GPG errors and tried the following methods at various stages: sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 3E5C1192 sudo apt-get install -reinstall ubuntu-extras-keyring (For Ubuntu Extras only) gpg –keyserver keyserver.ubuntu.com –recv 3E5C1192 gpg –export –armor 3E5C1192 | sudo apt-key add - sudo apt-get update sudo aptitude -o Acquire::http::No-Cache=True -o Acquire::BrokenProxy=true update sudo -i apt-get clean cd /var/lib/apt mv lists lists.old mkdir -p lists/partial apt-get clean apt-get update I again got BADSIG error for extras.ubuntu.com today. So, I'm really at a loss what's causing this error to occur time and again. I really want to solve this problem once and for all.

    Read the article

  • Can't add repos after upgrading to 12.04 LTS

    - by joao
    I'm a complete Linux newbie. I've just upgraded from 10.04 to 12.04 LTS and all sorts of things have started to go wrong. One main problem is the fact that I can't add repos. Example: sudo add-apt-repository ppa:team-xbmc outputs: Traceback (most recent call last): File "/usr/bin/add-apt-repository", line 8, in <module> from softwareproperties.SoftwareProperties import SoftwareProperties File "/usr/lib/python2.7/dist-packages/softwareproperties/SoftwareProperties.py", line 53, in <module> from ppa import AddPPASigningKeyThread, expand_ppa_line File "/usr/lib/python2.7/dist-packages/softwareproperties/ppa.py", line 27, in <module> import pycurl ImportError: librtmp.so.0: cannot open shared object file: No such file or directory /etc/apt/sources.list # deb cdrom:[Ubuntu 10.04.1 LTS _Lucid Lynx_ - Release i386 (20100816.1)]/ lucid main restricted # deb cdrom:[Ubuntu 10.04.1 LTS _Lucid Lynx_ - Release i386 (20100816.1)]/ maverick main restricted # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://archive.ubuntu.com/ubuntu precise main restricted deb-src http://archive.ubuntu.com/ubuntu precise main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://archive.ubuntu.com/ubuntu precise-updates main restricted deb-src http://archive.ubuntu.com/ubuntu precise-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://archive.ubuntu.com/ubuntu precise universe deb-src http://archive.ubuntu.com/ubuntu precise universe deb http://archive.ubuntu.com/ubuntu precise-updates universe deb-src http://archive.ubuntu.com/ubuntu precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://archive.ubuntu.com/ubuntu precise multiverse deb-src http://archive.ubuntu.com/ubuntu precise multiverse deb http://archive.ubuntu.com/ubuntu precise-updates multiverse deb-src http://archive.ubuntu.com/ubuntu precise-updates multiverse ## Uncomment the following two lines to add software from the 'backports' ## repository. ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. # deb-src http://pt.archive.ubuntu.com/ubuntu/ lucid-backports main restricted universe multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. # deb http://archive.canonical.com/ubuntu lucid partner # deb-src http://archive.canonical.com/ubuntu lucid partner deb http://archive.ubuntu.com/ubuntu precise-security main restricted deb-src http://archive.ubuntu.com/ubuntu precise-security main restricted deb http://archive.ubuntu.com/ubuntu precise-security universe deb-src http://archive.ubuntu.com/ubuntu precise-security universe deb http://archive.ubuntu.com/ubuntu precise-security multiverse deb-src http://archive.ubuntu.com/ubuntu precise-security multiverse # deb http://ppa.launchpad.net/stebbins/handbrake-snapshots/ubuntu precise main # disabled on upgrade to precise I have no clue what do do next. Should I just scrap this installation and start from scratch or is this fixable? librtmp.so.0 also shows up in error logs I've started to get from XBMC (I'm not sure if this is relevant info). Thanks in advance for any help you can give me!

    Read the article

  • Apt-get update through tor

    - by Alexander
    I'm trying to update my apt-get list. In my country a lot of sites are blocked or have been blocked from companies. When I use a proxy for the whole system I get errors, tor works perfectly when browsing. My question is can I update apt-get through a connection from tor? I mean I want to unblock the blocked sites using tor connection so I can perform "apt-get update" without errors ... Thanks in advance. Edit BTW : I'm using Ubuntu 13.10 and Tor 0.2.21 alexander@Alexander-PC:~$ sudo apt-get update [sudo] password for alexander: Ign http://extras.ubuntu.com saucy InRelease Ign http://security.ubuntu.com saucy-security InRelease Ign http://us.archive.ubuntu.com saucy InRelease Hit http://extras.ubuntu.com saucy Release.gpg Get:1 http://dl.google.com stable InRelease [1,540 B] 100% [1 InRelease gpgv 1,540 B] [Waiting for headers] [Waiting for headers] [WaSplitting up/var/lib/apt/lists/partial/dl.google.com_linux_chrome_deb_dists_stabIgn http://dl.google.com stable InRelease E: GPG error: http://dl.google.com stable InRelease: Clearsigned file isn't valid, got 'NODATA' (does the network require authentication?

    Read the article

  • Problem when trying to update "Duplicate sources.list"

    - by Coca Akat
    I got this problem when trying to update using sudo apt-get update W: Duplicate sources.list entry http://archive.ubuntu.com/ubuntu/ saucy-backports/multiverse amd64 Packages (/var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_saucy-backports_multiverse_binary-amd64_Packages) W: Duplicate sources.list entry http://archive.ubuntu.com/ubuntu/ saucy-backports/multiverse i386 Packages (/var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_saucy-backports_multiverse_binary-i386_Packages) W: You may want to run apt-get update to correct these problems This is my souces.list : # deb cdrom:[Ubuntu 13.10 _Saucy Salamander_ - Release amd64 (20131016.1)]/ saucy main restricted # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://archive.ubuntu.com/ubuntu saucy main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://archive.ubuntu.com/ubuntu saucy-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://archive.ubuntu.com/ubuntu saucy universe deb http://archive.ubuntu.com/ubuntu saucy-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://archive.ubuntu.com/ubuntu saucy multiverse deb http://archive.ubuntu.com/ubuntu saucy-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://archive.ubuntu.com/ubuntu saucy-backports main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu saucy-security main restricted deb http://archive.ubuntu.com/ubuntu saucy-security universe deb http://archive.ubuntu.com/ubuntu saucy-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. # deb http://extras.ubuntu.com/ubuntu saucy main # deb-src http://extras.ubuntu.com/ubuntu saucy main # deb http://archive.canonical.com/ saucy partner # deb-src http://archive.canonical.com/ saucy partner # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. ## Major bug fix updates produced after the final release of the ## distribution. ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://archive.ubuntu.com/ubuntu saucy-backports multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software.

    Read the article

  • Install lubuntu 12.04 on an old Dell c600 : Video issues

    - by maniat1k
    I am trying to install lubuntu on an old laptop. I use the 386 alternate instalation of it, because it has only 256mb ... All when ok so when I start up the lubuntu the screen splits between 1024x768 and 800x600... its very horrible to use =). Ok I do this: lspci and found an ATI Rage mobility M3. 01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02) So I tryied the old xorg way to edit the missing resolution, but it does not work:... Section "Screen" Identifier "Default Screen" Device "ATI Technologies, Inc. Rage Mobility M3 (AGP)" Monitor "Generic Monitor" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1024x768" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" EndSubSection EndSection on an brand new xorg.conf... Do an init 6 to see if X take the changes, but nothing habbened: also tryed to do pkg-reconfigure -changedir /etc/X11 (where I created the new xorg.conf) and nothing.. removed the X conf from /tmp.. also do sudo apt-get update / upgrade... and no luck... UPDATE Updated to 12.04. This an edited xorg fr old dells like mine: # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg # xorg.conf for dell latitude c600 by A. Howlett and others Section "ServerLayout" Identifier "Default Server Layout" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" InputDevice "Generic Mouse" "AlwaysCore" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "/usr/share/fonts/local" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/75dpi:unscaled" FontPath "/usr/share/fonts/100dpi:unscaled" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/CID" FontPath "/usr/share/fonts/Speedo" FontPath "/usr/share/fonts/cyrillic" FontPath "/usr/share/fonts/artwiz-aleczapka" FontPath "/usr/share/fonts/TTF" FontPath "/usr/share/fonts/util" FontPath "/usr/local/share/fonts" FontPath "/usr/share/fonts" FontPath "/usr/share/fonts" FontPath "/usr/share/fonts/aquafont" FontPath "/usr/share/fonts/artwiz" FontPath "/usr/share/fonts/artwiz-aleczapka-en" FontPath "/usr/share/fonts/corefonts" FontPath "/usr/share/fonts/freefont" EndSection Section "Module" Load "GLcore" Load "dbe" Load "dri" Load "extmod" Load "glx" Load "pex5" Load "record" Load "xie" Load "v4l" Load "freetype" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "XkbModel" "pc104" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "CorePointer" Option "Device" "/dev/psaux" Option "Protocol" "PS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Generic Mouse" Driver "mouse" Option "SendCoreEvents" "true" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "laptop LCD" VendorName "Dell" ModelName "Latitude C600" HorizSync 31.5-48.5 VertRefresh 40-70 EndSection Section "Device" Identifier "Video0" Driver "r128" VideoRam 8192 Option "EnablePageFlip" "true" Option "AGPFastWrite" "true" Option "AGPMode" "2" BusID "PCI:01:00:0" Screen 0 Option "Display" "FP" Option "MonitorLayout" "CRT, LFP" EndSection Section "Screen" Identifier "Screen0" Device "Video0" Monitor "laptop LCD" DefaultDepth 16 Subsection "Display" Depth 32 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 24 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 16 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 8 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection

    Read the article

  • Access Denied

    - by Tony Davis
    When Microsoft executives wake up in the night screaming, I suspect they are having a nightmare about their own version of Frankenstein's monster. Created with the best of intentions, without thinking too hard of the long-term strategy, and having long outlived its usefulness, the monster still lives on, occasionally wreaking vengeance on the innocent. Its name is Access; a living synthesis of disparate body parts that is resistant to all attempts at a mercy-killing. In 1986, Microsoft had no database products, and needed one for their new OS/2 operating system, the successor to MSDOS. In 1986, they bought exclusive rights to Sybase DataServer, and were also intent on developing a desktop database to capture Ashton-Tate's dominance of that market, with dbase. This project, first called 'Omega' and later 'Cirrus', eventually spawned two products: Visual Basic in 1991 and Access in late 1992. Whereas Visual Basic battled with PowerBuilder for dominance in the client-server market, Access easily won the desktop database battle, with Dbase III and DataEase falling away. Access did an excellent job of abstracting and simplifying the task of building small database applications in a short amount of time, for a small number of departmental users, and often for a transient requirement. There is an excellent front end and forms generator. We not only see it in Access but parts of it also reappear in SSMS. It's good. A business user can pull together useful reports, without relying on extensive technical support. A skilled Access programmer can deliver a fairly sophisticated application, whilst the traditional client-server programmer is still sharpening his pencil. Even for the SQL Server programmer, the forms generator of Access is useful for sketching out application designs. So far, so good, but here's where the problems start; Access ties together two different products and the backend of Access is the bugbear. The limitations of Jet/ACE are well-known and documented. They range from MDB files that are prone to corruption, especially as they grow in size, pathetic security, and "copy and paste" Backups. The biggest problem though, was an infamous lack of scalability. Because Microsoft never realized how long the product would last, they put little energy into improving the beast. Microsoft 'ate their own dog food' by using Access for Microsoft Exchange and Outlook. They choked on it. For years, scalability and performance problems with Exchange Server have been laid at the door of the Jet Blue engine on which it relies. Substantial development work in Exchange 2010 was required, just in order to improve the engine and storage schema so that it more efficiently handled the reading and writing of mails. The alternative of using SQL Server just never panned out. The Jet engine was designed to limit concurrent users to a small number (10-20). When Access applications outgrew this, bitter experience proved that there really is no easy upgrade path from Access to SQL Server, beyond rewriting the whole lot from scratch. The various initiatives to do this never quite bridged the cultural gulf between Access and a true relational database So, what are the obvious alternatives for small, strategic database applications? I know many users who, for simple 'list maintenance' requirements are very happy using Excel databases. Surely, now that PowerPivot has led the way, it is time for Microsoft to offer a new RAD package for database application development; namely an Excel-based front end for SQL Server Express. In that way, we'll have a powerful and familiar front end, to a scalable database, and a clear upgrade path when an app takes off and needs to go enterprise. Cheers, Tony.

    Read the article

  • DAC pack up all your troubles

    - by Tony Davis
    Visual Studio 2010, or perhaps its apparently-forthcoming sister, "SQL Studio", is being geared up to become the natural way for developers to create databases. Central to this drive is the introduction of 'data-tier application components', or DACs. Applications are developed as normal but when it comes to deployment, instead of supplying the DBA with a bunch of scripts to create the required database objects, the developer creates a single DAC Package ("DAC Pack"); a zipped XML file containing all the database objects needed by the application, along with versioning information, policies for deployment, and so on. It's an intriguing prospect. Developers can work on their development database using their existing tools and source control, and then package up the changes into a single DACPAC for deployment and management. DBAs get an "application level view" of how their instances are being used and the ability to collectively, rather than individually, manage the objects. The DBA needing to manage a large number of relatively small databases can use "DAC snapshots" to get a quick overview of what has changed across all the databases they manage. The reason that DAC packs haven't caused more excitement is that they can only be pushed to SQL Server 2008 R2, and they must be developed or inspected using Visual Studio 2010. Furthermore, what we see right now in VS2010 is more of a 'work-in-progress' or 'vision of the future', with serious shortcomings and restrictions that render it unsuitable for anything but small 'non-critical' departmental databases. The first problem is that DAC packs support a limited set of schema objects (corresponding closely to the features available on 'Azure'). This means that Service Broker queues, CLR Objects, and perhaps most critically security (permissions, certificates etc.), are off-limits. Applications that require these objects will need to add them via a post-deployment TSQL script, rather defeating the whole idea. More worrying still is the process for altering a database with a DAC pack. The grand 'collective' philosophy, whereby a single XML file can be used for deploying and managing builds and changes, extends, unfortunately, to database upgrades. Any change to a database object will result in the creation of a new database, copying the data from the old version, nuking the previous one, and then renaming the new one. Simple eh? The problem is that even something as trivial as adding a comment to a stored procedure in a 5GB database will require the server to find at least twice as much space, as well sufficient elbow-room in the transaction log for copying the largest table. Of course, you'll need to take the database offline for the full course of the deployment, which is likely to take a long time if there is a lot of data. This upgrade/rename process breaks the log chain, makes any subsequent full restore operation highly complicated, and will also break log shipping. As with any grand vision, the devil is always in the detail. It's hard to fathom why Microsoft hasn't used a SQL Compare-style approach to the upgrade process, altering a database with a change script, and this will surely be adopted in the near future. Something had to be in place for VS2010, but right now DAC packs only make sense for Azure. For this, they're cute, but hardly compelling. Nevertheless, DBAs would do well to get familiar with VS 2010 and DAC packs. Like it or not, they're both coming. Cheers, Tony.

    Read the article

  • Extreme Optimization – Numerical Algorithm Support

    - by JoshReuben
    Function Delegates Many calculations involve the repeated evaluation of one or more user-supplied functions eg Numerical integration. The EO MathLib provides delegate types for common function signatures and the FunctionFactory class can generate new delegates from existing ones. RealFunction delegate - takes one Double parameter – can encapsulate most of the static methods of the System.Math class, as well as the classes in the Extreme.Mathematics.SpecialFunctions namespace: var sin = new RealFunction(Math.Sin); var result = sin(1); BivariateRealFunction delegate - takes two Double parameters: var atan2 = new BivariateRealFunction (Math.Atan2); var result = atan2(1, 2); TrivariateRealFunction delegate – represents a function takes three Double arguments ParameterizedRealFunction delegate - represents a function taking one Integer and one Double argument that returns a real number. The Pow method implements such a function, but the arguments need order re-arrangement: static double Power(int exponent, double x) { return ElementaryFunctions.Pow(x, exponent); } ... var power = new ParameterizedRealFunction(Power); var result = power(6, 3.2); A ComplexFunction delegate - represents a function that takes an Extreme.Mathematics.DoubleComplex argument and also returns a complex number. MultivariateRealFunction delegate - represents a function that takes an Extreme.Mathematics.LinearAlgebra.Vector argument and returns a real number. MultivariateVectorFunction delegate - represents a function that takes a Vector argument and returns a Vector. FastMultivariateVectorFunction delegate - represents a function that takes an input Vector argument and an output Matrix argument – avoiding object construction  The FunctionFactory class RealFromBivariateRealFunction and RealFromParameterizedRealFunction helper methods - transform BivariateRealFunction or a ParameterizedRealFunction into a RealFunction delegate by fixing one of the arguments, and treating this as a new function of a single argument. var tenthPower = FunctionFactory.RealFromParameterizedRealFunction(power, 10); var result = tenthPower(x); Note: There is no direct way to do this programmatically in C# - in F# you have partial value functions where you supply a subset of the arguments (as a travelling closure) that the function expects. When you omit arguments, F# generates a new function that holds onto/remembers the arguments you passed in and "waits" for the other parameters to be supplied. let sumVals x y = x + y     let sumX = sumVals 10     // Note: no 2nd param supplied.     // sumX is a new function generated from partially applied sumVals.     // ie "sumX is a partial application of sumVals." let sum = sumX 20     // Invokes sumX, passing in expected int (parameter y from original)  val sumVals : int -> int -> int val sumX : (int -> int) val sum : int = 30 RealFunctionsToVectorFunction and RealFunctionsToFastVectorFunction helper methods - combines an array of delegates returning a real number or a vector into vector or matrix functions. The resulting vector function returns a vector whose components are the function values of the delegates in the array. var funcVector = FunctionFactory.RealFunctionsToVectorFunction(     new MultivariateRealFunction(myFunc1),     new MultivariateRealFunction(myFunc2));  The IterativeAlgorithm<T> abstract base class Iterative algorithms are common in numerical computing - a method is executed repeatedly until a certain condition is reached, approximating the result of a calculation with increasing accuracy until a certain threshold is reached. If the desired accuracy is achieved, the algorithm is said to converge. This base class is derived by many classes in the Extreme.Mathematics.EquationSolvers and Extreme.Mathematics.Optimization namespaces, as well as the ManagedIterativeAlgorithm class which contains a driver method that manages the iteration process.  The ConvergenceTest abstract base class This class is used to specify algorithm Termination , convergence and results - calculates an estimate for the error, and signals termination of the algorithm when the error is below a specified tolerance. Termination Criteria - specify the success condition as the difference between some quantity and its actual value is within a certain tolerance – 2 ways: absolute error - difference between the result and the actual value. relative error is the difference between the result and the actual value relative to the size of the result. Tolerance property - specify trade-off between accuracy and execution time. The lower the tolerance, the longer it will take for the algorithm to obtain a result within that tolerance. Most algorithms in the EO NumLib have a default value of MachineConstants.SqrtEpsilon - gives slightly less than 8 digits of accuracy. ConvergenceCriterion property - specify under what condition the algorithm is assumed to converge. Using the ConvergenceCriterion enum: WithinAbsoluteTolerance / WithinRelativeTolerance / WithinAnyTolerance / NumberOfIterations Active property - selectively ignore certain convergence tests Error property - returns the estimated error after a run MaxIterations / MaxEvaluations properties - Other Termination Criteria - If the algorithm cannot achieve the desired accuracy, the algorithm still has to end – according to an absolute boundary. Status property - indicates how the algorithm terminated - the AlgorithmStatus enum values:NoResult / Busy / Converged (ended normally - The desired accuracy has been achieved) / IterationLimitExceeded / EvaluationLimitExceeded / RoundOffError / BadFunction / Divergent / ConvergedToFalseSolution. After the iteration terminates, the Status should be inspected to verify that the algorithm terminated normally. Alternatively, you can set the ThrowExceptionOnFailure to true. Result property - returns the result of the algorithm. This property contains the best available estimate, even if the desired accuracy was not obtained. IterationsNeeded / EvaluationsNeeded properties - returns the number of iterations required to obtain the result, number of function evaluations.  Concrete Types of Convergence Test classes SimpleConvergenceTest class - test if a value is close to zero or very small compared to another value. VectorConvergenceTest class - test convergence of vectors. This class has two additional properties. The Norm property specifies which norm is to be used when calculating the size of the vector - the VectorConvergenceNorm enum values: EuclidianNorm / Maximum / SumOfAbsoluteValues. The ErrorMeasure property specifies how the error is to be measured – VectorConvergenceErrorMeasure enum values: Norm / Componentwise ConvergenceTestCollection class - represent a combination of tests. The Quantifier property is a ConvergenceTestQuantifier enum that specifies how the tests in the collection are to be combined: Any / All  The AlgorithmHelper Class inherits from IterativeAlgorithm<T> and exposes two methods for convergence testing. IsValueWithinTolerance<T> method - determines whether a value is close to another value to within an algorithm's requested tolerance. IsIntervalWithinTolerance<T> method - determines whether an interval is within an algorithm's requested tolerance.

    Read the article

  • 5 Ways to Celebrate the Release of Internet Explorer 9

    - by David Wesst
    The day has finally come: Microsoft has released a web browser that is awesome. On Monday night, Microsoft officially introduced the world to the latest edition to its product family: Internet Explorer 9. That makes March 14, 2011 (also known as PI day) the official birthday of Microsoft’s rebirth in the world of web browsing. Just like any big event, you take some time to celebrate. Here are a few things that you can do to celebrate the return of Internet Explorer. 1. Download It If you’re not a big partier, that’s fine. The one thing you can do (and definitely should) is download it and give it a shot. Sure, IE may have disappointed you in the past, but believe me when I say they really put the effort in this time. The absolute least you can do is give it a shot to see how it stands up against your favourite browser. 2. Get yourself an HTML5 Shirt One of the coolest, if not best parts of IE9 being released is that it officially introduces HTML5 as a fully supported platform from Microsoft. IE9 supports a lot of what is already defined in the HTML5 technical spec, which really demonstrates Microsoft’s support of the new standard. Since HTML5 is cool on the web, it means that it is cool to wear it too. Head over to html5shirt.com and get yourself, or your staff, or your whole family, an HTML5 shirt to show the real world that you are ready for the future of the web. 3. HTML5-ify Something Okay, so maybe a shirt isn’t enough for you. Maybe you need start using HTML5 for real. If you have a blog, or a website, or anything out there on the web, celebrate IE9 adding some HTML5 to your site. Whether that is updating old code, adding something new, or just changing your WordPress theme, definitely take a look at what HTML5 can do for you. 4. Help Kill Old IE and Upgrade your Organization See this? This is sad. Upgrading web browsers in an large enterprise or organization is not a trivial task. A lot of companies will use the excuse of not having the resources to upgrade legacy web applications they were built for a specific version of IE and it doesn’t render correctly in legacy browsers. Well, it’s time to stop the excuses. IE9 allows you to define what version of Internet Explorer you would like it to emulate. It takes minimal effort for the developer, and will get rid of the excuses. Show your IT manager or software development team this link and show them how easy it is to make old code render right in the latest and greatest from the IE team. 5. Submit an Entry for DevUnplugged So, you’ve made it to number five eh? Well then, you must be pretty hardcore to make it this far down the list. Fine, let’s take it to the next level and build an HTML5 game. That’s right. A game. Like a video game. HTML5 introduces some amazing new features that can let you build working video games using HTML5, CSS3, and JavaScript. Plus, Microsoft is celebrating the launch of IE9 with a contest where you can submit an HTML5 game (or audio application) and have a chance to win a whack of cash and other prizes. Head here for the full scoop and rules for the DevUnplugged. This post also appears at http://david.wes.st

    Read the article

  • unable to add/remove program in Ubuntu 12.04 LTS?

    - by Manish Kumar Chauhan
    ** my problem is as following: unable to add/remove any program using either update-manager or Synaptic Package Manager or terminal update-manager is asking for partial upgrade and while updating software-center 5.6.2 catalog , there is no progress beyond the line "this is may take a moment" synaptic is unable to obtain an exclusive lock, similarly can't do terminal command sudo apt-get update if i try to break down the lock using the command sudo fuser -cuk /var/lib/dpkg/lock; sudo rm -f /var/lib/dpkg/lock it turns off my monitor display and i have to restart the whole system. note: this whole trouble started ,when i found ubuntu software-center missing after adding a repository and reinstalled it. **

    Read the article

  • Custom Templates: Using user exits

    - by Anthony Shorten
    One of the features of Oracle Utilities Application Framework V4.1 is the ability to use templates and user exits to extend the base configuration files. The configuration files used by the product are based upon a set of templates shipped with the product. When the configureEnv utility asks for configuration settings they are stored in a configuration file ENVIRON.INI which outlines the environment settings. These settings are then used by the initialSetup utility to populate the various configuration files used by the product using templates located in the templates directory of the installation. Now, whilst the majority of the installations at any site are non-production and the templates provided are generally adequate for that need, there are circumstances where extension of templates are needed to take advantage of more advanced facilities (such as advanced security and environment settings). The issue then becomes that if you alter the configuration files manually (directly or indirectly) then you may lose all your custom settings the next time you run initialSetup. To counter this we allow customers to either override templates with their own template or we now provide user exits in the templates to add fragments of configuration unique to that part of the configuration file. The latter means that the base template is still used but additions are included to provide the extensions. The provision of custom templates is supported but as soon as you use a custom template you are then responsible for reflecting any changes we put in the base template over time. Not a big task but annoying if you have to do it for multiple copies of the product. I prefer to use user exits as they seem to represent the least effort solution. The way to find the user exits available is to either read the Server Administration Guide that comes with your product or look at individual templates and look for the lines: #ouaf_user_exit <user exit name> Where <user exit name> is the name of the user exit. User exits are not always present but are in places that we feel are the most likely to be changed. If a user exit does not exist the you can always use a custom template instead. Now lets show an example. By default, the product generates a config.xml file to be used with Oracle WebLogic. This configuration file has the basic setting contained in it to manage the product. If you want to take advantage of the Oracle WebLogic advanced settings, you can use the console to make those changes and it will be reflected in the config.xml automatically. To retain those changes across invocations of initialSetup, you need to alter the template that generates the config.xml or use user exits. The technique is this. Make the change in the console and when you save the change, WebLogic will reflect it in the config.xml for you. Compare the old version and new version of the config.xml and determine what to add and then find the user exit to put it in by examining the base template. For example, by default, the console is not automatically deployed (it is deployed on demand) in the base config.xml. To make the console deploy, you can add the following line to the templates/CM_config.xml.win.exit_3.include file (for windows) or templates/CM_config.xml.exit_3.include file (for linux/unix): <internal-apps-deploy-on-demand-enabled>false</internal-apps-deploy-on-demand-enabled> Now run initialSetup to reflect the change and if you check the splapp/config/config.xml file you will see the change applied for you. Now how did I know which include file? I check the template for config.xml and found there was an user exit at the right place. I prefixed my include filename with "CM_" to denote it as a custom user exit. This will tell the upgrade tools to leave that file alone whenever you decide to upgrade (or even apply fixes). User exits can be powerful and allow customizations to be added for advanced configuration. You will see products using Oracle Utilities Application Framework use this exits themselves (usually prefixed with the product code). You are also taking advantage of them.

    Read the article

  • October 2013 Oracle University Round-Up: New Training & Certifications

    - by Breanne Cooley
    Here are the highlights of what is happening this month at Oracle University.  New Technology Overview Courses: Cloud, Big Data and Security Learn about the latest technology solutions that can transform your business. These three Training On Demand courses are taught by industry experts. These courses help you develop an understanding of how Oracle technologies can make a positive impact on your organization.  Oracle Cloud Overview  Oracle Big Data Overview Oracle Security Overview  New Cloud Application Foundation Courses Check out our brand new 12c courses for WebLogic Server administrators and Coherence developers:  Oracle WebLogic Server 12c: Administration I Oracle WebLogic Server 12c: Administration II Oracle Coherence 12c: New Features  Oracle Database 12c Courses Our Oracle Database 12c training is becoming very popular. Here are this month's featured courses:  Oracle Database 12c: New Features for Administrators Oracle Database 12c: Administration Workshop  Oracle Database 12c: Install and Upgrade Workshop Oracle Database 12c: Admin, Install and Upgrade Accelerated  Validate your expertise and add value by earning an Oracle Database 12c Certification.  New Certifications for MySQL Watch our two new videos to find out what's new with Oracle MySQL Certifications. 1) Oracle MySQL 5.6 Certification: What's New for Database Administrators  Recommended training:  MySQL for Beginners MySQL for Database Administrators  2) Oracle MySQL 5.6 Certification: What's New for Developers Recommended training:  MySQL for Beginners MySQL for Developers New Training & Certification for Oracle Applications JD Edwards 9.1 Training Additional JD Edwards Enterprise One 9.1 training is now available for administrators, developers and implementation team members. Cross Application Training  JD Edwards Enterprise One Common Foundation Rel 9.x  Human Capital Management Training  JD Edwards EnterpriseOne Payroll for Canada Rel 9.x JD Edwards EnterpriseOne Payroll for US Rel 9.x JD Edwards EnterpriseOne Payroll Accelerated for Canada Rel 9.x JD Edwards EnterpriseOne Payroll Accelerated for US Rel 9.x  Financial  Management Training  JD Edwards EnterpriseOne Accounts Receivable Rel 9.x JD Edwards EnterpriseOne Financial Report Writing Rel 9.x  Knowledge Management 8.5 Training Oracle Knowledge 8.5 training is now available for analysts interested in learning how to quickly spot trends in content processing and system usage with analytics dashboards. Knowledge Analytics Rel 8.5  Taleo Training Updated Taleo training is now available. Taleo Business Edition (TEE) business users can learn how to create more efficient reports. Recruiters will learn how to efficiently and effectively use Taleo Business Edition (TBE) Recruit.  Taleo (TEE): Advanced Reporting Taleo (TBE): Recruit - End User Fundamentals  New Training for Oracle Retail 13.4.1 Updated training for Retail Predictive Application Server and Retail Demand Forecasting is now available.  RPAS Administration and Configuration Fundamentals RPAS Technical Essentials: Fusion Client 13.4.1 Retail Demand Forecasting (RDF) Business Essentials 13.4.1  View all available training courses, learning paths and certifications at education.oracle.com, or contact your local education representative to learn more about Oracle University's education solutions. See you in class!  -Oracle University Marketing Team 

    Read the article

  • Optimistic work sharing on sparsely distributed systems

    - by Asti
    What would a system like BOINC look like if it were written today? At the time BOINC was written, databases were the primary choice for maintaining a shared state and concurrency among nodes. Since then, many approaches have been developed for tasking with optimistic concurrency (OT, partial synchronization primitives, shared iterators etc.) Is there an optimal paradigm for optimistically distributing units of work on sparsely distributing systems which communicate through message passing? Sorry if this is a bit vague. P.S. The concept of Tuple-spaces is great, but locking is inherent to its definition. Edit: I already have a federation system which works very well. I have a reactive OT system is implemented on top of it. I'm looking to extend it to get clients to do units of work.

    Read the article

  • Workflow versioning

    - by Nitra
    I believe I have a fundamental misunderstanding when it comes to workflow engines which I would appreciate if you could help me sort out. I'm not sure if my misunderstanding is specific to the workflow engine I'm using, or if it's a general misunderstanding. I happen to use Windows Workflow Foundation (WWF). TLDR-version WWF allows you to implement business processes in long-running workflows (think months or even years). When started, the workflows can't be changed. But what business process can't change at any time? And if a business process changes, wouldn't you want your software to reflect this change for already started 'instances' of the business process? What am I missing? Background In WWF you define a workflow by combining a set of activites. There are different types of activities - some of them are for flow control, such as the IfElseActivity and the WhileActivty while others allows you to perform actual tasks, such as the CodeActivity wich allows you to run .NET code and the InvokeWebServiceActivity which allows you to call web services. The activites are combined to a workflow using a visual designer. You pretty much drag-and-drop activities from a toolbox to a designer area and connect the activites to each other. The workflow and activities have input paramters, output parameters and variables. We have a single workflow which sometimes runs in a matter of a few days, but it may run for 5-6 months. WWF takes care of persisting the workflow state (what activity are we currently executing, what are the variable values and so on). So far I think WWF makes sense. Some people will prefer to implement a software representation of a business process using a visual designer over writing all of it in code. So what's the issue then? What I don't really get is the following: WWF is designed to take care of long-running workflows. But at the same time, WWF has no built-in functionality which allows you to modify the running workflows. So if you model a business process using a workflow and run that for 6 months, you better hope that the business process does not change. Because if it do, you'll have to have multiple versions of the workflow executing at the same time. This seems like a fundamental design mistake to me, but at the same time it seems more likely that I've misunderstood something. For us, this has had some real-world effects: We release new versions every month, but some workflows may run for a year. This means that we have several versions of the workflow running in parallell, in other words several versions of the business logics. This is the same as having many differnt versions of your code running in production in the same system at the same time, which becomes a bit hard to understand for users. (depending on on whether they clicked a 'Start' button 9 or 10 months ago, the software will behave differently) Our workflow refers to different types of entities and since WWF now has persisted and serialized these we can't really refactor the entities since then existing workflows can't be resumed (deserialization will fail We've received some suggestions on how to handle this When we create a new version of the workflow, cancel all running workflows and create new ones. But in our workflows there's a lot of manual work involved and if we start from scratch a lot of people has to re-do their work. Track what has been done in the workflow and when you create a new one skip activites which have already been executed. I feel that this alternative may work for simple workflows, but it becomes hairy to automatically figure out what activities to skip if there's major refactoring done to a workflow. When we create a new version of the workflow, upgrade old versions using the new WWF 4.5 functionality for upgrading workflows. But then we would have to skip using the visual designer and write code to inject activities in the right places in the workflow. According to MSDN, this upgrade functionality is only intended for minor bug fixes and not larger changes. What am I missing?

    Read the article

  • Add Reference with Search

    - by Daniel Cazzulino
    If you have been using VS2010 for any significant amount of time, you surely came across the awkward, slow and hard to use Add Reference dialog. Despite some (apparent) improvements over the VS2008 behavior, in its current form it's even LESS usable than before. A brief non-exhaustive summary of the typical grief with this dialog is: Scrolling a list of *hundreds* of entries? (300+ typically) No partial matching when typing: yes, you can type in the list to get to the desired entry, but the matching is performed in an exact manner, from the beginning of the assembly name. So, to get to the (say) "Microsoft.VisualStudio.Settings" assembly, you actually have to type the first two segments in their entirety before starting to type "Settings"....Read full article

    Read the article

  • The perfect crossfade

    - by epologee
    I find it hard to describe this problem in words, which is why I made a video (45 seconds) to illustrate it. Here's a preview of the questions, please have a look at it on Vimeo: http://vimeo.com/epologee/perfect-crossfade The issue of creating a flawless crossfade or dissolve of two images or shapes has been recurring to me in a number of fields over the last decade. First in video editing, then in Flash animation and now in iOS programming. When you start googling it, there are many workarounds to be found, but I really want to solve this without a hack this time. The summary: What is the name of the technique or curve to apply in crossfading two semi-transparent, same-colored bitmaps, if you want the resulting transparency to match the original of either one? Is there a (mathematical) function to calculate the neccessary partial transparency/alpha values during the fade? Are there programming languages that have these functions as a preset, similar to the ease in, ease out or ease in out functions found in ActionScript or Cocoa?

    Read the article

  • Information on upgrading Kinect Applications to MS SDK Beta 2.

    - by mbcrump
    Introduction Microsoft recently released the Kinect for Windows SDK Beta 2. It contains many enhancements and fixes that can be found here. The only problem with it is that a lot of current demo applications no longer function properly. Today, I’m going to walk you through a typical scenario of upgrading a Kinect application built with Beta 1 to Beta 2. Note: This tutorial covers WPF, but you can use the same techniques for WinForms. 1) Fix the references Let’s start with a fairly popular Kinect demo called Kinect User Interface Demo. This project uses the beta 1 version of Microsoft.Research.Kinect.dll and version 1.0.0.0 of Coding4Fun’s Kinect library. After you download the source code and extract the zip you will see the following references in Visual Studio 2010: Pay attention to the following references as these are the .dlls that you will have to update: Coding4Fun.Kinect.Wpf Microsoft.Research.Kinect If you click on Coding4Fun.Kinect.Wpf file you will see the following version information (v1.0.0.0): This needs to be upgraded to the Coding4Fun Kinect library built against Beta 2. So head over to http://c4fkinect.codeplex.com/ and hit download and you will have the following files. Go ahead and hit the delete key on your keyboard to remove the Coding4Fun.Kinect.Wpf.dll file from your project. Select “Add Reference” and navigate out to the folder where you extracted the files and select Coding4Fun.Kinect.Wpf.dll. If you click on the Coding4Fun.Kinect.Wpf.dll file and check properties it should be listed at 1.1.0.0: Fix Microsoft.Research.Kinect.dll The official SDK Beta 2 released a new .dll that you will need to reference in your application. Go ahead and select Microsoft.Research.Kinect.dll in your application and hit the Delete key on your keyboard. Go ahead and select Add Reference again and select Microsoft.Research.Kinect.dll from the .NET tab. Double check and make sure the version number is 1.0.0.45 as shown below. References fixed – Runtime needs to be updated. So we have fixed the references in a typical Kinect application that uses Microsoft’s SDK and C4F Kinect libraries. Now, we will need to update the runtime. All Beta 1 Kinect applications will instantiate the Runtime with the following code: Can you see that it is now marked with [Depreciated]? That means we need to update it before Microsoft decides to remove it from future versions of the SDK. We can fix this very easily by replacing this code: readonly Runtime _runtime = new Runtime(); with Microsoft.Research.Kinect.Nui.Runtime _nui; and adding similar code to our Loaded event as shown below public MainWindow() { InitializeComponent(); Loaded += new RoutedEventHandler(MainWindow_Loaded); } void MainWindow_Loaded(object sender, RoutedEventArgs e) { if (Runtime.Kinects.Count == 0) { txtInfo.Text = "Missing Kinect"; } else { _nui = Runtime.Kinects[0]; _nui.Initialize(RuntimeOptions.UseColor); // Video Frame Ready Event can happen now!!! //_nui.VideoFrameReady += new EventHandler<ImageFrameReadyEventArgs>(_nui_VideoFrameReady); _nui.VideoStream.Open(ImageStreamType.Video, 2, ImageResolution.Resolution640x480, ImageType.Color); } } In this sample, I am testing to see if a Kinect is detected and if it is then I initialize the runtime with my first Kinect by using the Runtime.Kinects[0]. You can also specify other Kinect devices here. The rest of the code is standard code that you simply modify however you wish (ie Skeletal, Depth, etc) depending on what type of video feed you want. Conclusion As you can see it really wasn’t that painful to upgrade your project to Beta 2. I would recommend that you go ahead and upgrade to Beta 2 as future versions of the SDK will use these methods.  Thanks for reading. Subscribe to my feed

    Read the article

  • Why do I get the result zero when I try to get the width of a DropDownList control in asp.net?

    - by Paul Jack
    After I click button1, it display 0, why? How can get correct width of a DropDownList control? Thanks! <%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default2.aspx.cs" Inherits="Default2" % Item 1 Item 2 </div> </form> using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.UI; using System.Web.UI.WebControls; public partial class Default2 : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { } protected void Button1_Click(object sender, EventArgs e) { Button1.Text = DropDownList1.Width.Value.ToString(); } }

    Read the article

  • Partitioning tutorial - new features in Oracle Database 12c

    - by KLaker
    For data warehousing projects Oracle Partitioning really is a must-have feature because it delivers so many important benefits such as: Dramatically improves query performance and speeds up database maintenance operations Lowers costs by enabling a tiered storage approach that allows data to be stored on the most cost-effective storage for better resource utilisation Combined with Oracle Advanced Compression, it provides an automated approach to information lifecycle management using a simple, efficient, yet powerful way to manage data growth and reduce complexity and costs To help you get the most from partitioning we have released a new tutorial that covers the 12c new features. Topics include how to: Use Interval Reference Partitioning Perform Cascading TRUNCATE and EXCHANGE Operations Move Partitions Online Maintain Multiple Partitions Maintain Global Indexes Asynchronously Use Partial Indexes For more information about this tutorial follow this link to the Oracle Learning Library: http://apex.oracle.com/pls/apex/f?p=44785:24:0::NO:24:P24_CONTENT_ID,P24_PREV_PAGE:8408,2 where you can begin your tutorial right now! For more information about Oracle Partitioning visit our home page on OTN: http://www.oracle.com/technetwork/database/bi-datawarehousing/dbbi-tech-info-part-100980.html

    Read the article

  • Is chess-like AI really inapplicable in turn-based strategy games?

    - by Joh
    Obviously, trying to apply the min-max algorithm on the complete tree of moves works only for small games (I apologize to all chess enthusiasts, by "small" I do not mean "simplistic"). For typical turn-based strategy games where the board is often wider than 100 tiles and all pieces in a side can move simultaneously, the min-max algorithm is inapplicable. I was wondering if a partial min-max algorithm which limits itself to N board configurations at each depth couldn't be good enough? Using a genetic algorithm, it might be possible to find a number of board configurations that are good wrt to the evaluation function. Hopefully, these configurations might also be good wrt to long-term goals. I would be surprised if this hasn't been thought of before and tried. Has it? How does it work?

    Read the article

  • Creating ADF Faces Comamnd Button at Runtime

    - by Frank Nimphius
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} In ADF Faces, the command button is an instance of RichCommandButton and can be created at runtime. While creating the button is not difficult at all, adding behavior to it requires knowing about how to dynamically create and add an action listener reference. The example code below shows two methods: The first method, handleButtonPress is a public method exposed on a managed bean. public void handleButtonPress(ActionEvent event){   System.out.println("Event handled");   //optional: partially refresh changed components if command   //issued as a partial submit } The second method is called in response to a user interaction or on page load and dynamically creates and adds a command button. When the button is pressed, the managed bean method – the action handler – defined above is called. The action handler is referenced using EL in the created MethodExpression instance. If the managed bean is in viewScope, backingBeanScope or pageFlowsScope, then you need to add these scopes as a prefix to the EL (as you would when configuring the managed bean reference at design time) //Create command button and add it as a child to the parent component that is passed as an //argument to this method private void reateCommandButton(UIComponent parent){   RichCommandButton edit = new RichCommandButton();   //make the request partial   edit.setPartialSubmit(true);   edit.setText("Edit");                             //compose the method expression to invoke the event handler   FacesContext fctx = FacesContext.getCurrentInstance();   Application application = fctx.getApplication();   ExpressionFactory elFactory = application.getExpressionFactory();   ELContext elContext = facesCtx.getELContext();   MethodExpression methodExpressio = null;   //Make sure the EL expression references a valid managed bean method. Ensure   //the bean scope is properly addressed    methodExpression =  elFactory.createMethodExpression(                              elContext,"#{myRequestScopeBean.handleButtonPress}",                             Object.class,new Class[] {ActionEvent.class});   //Create the command buttonaction listener reference   MethodExpressionActionListener al = null;          al= new MethodExpressionActionListener(methodExpression);    edit.addActionListener(al);     //add new command button to parent component and PPR the component for     //the button to show    parent.getChildren().add(edit);    AdfFacesContext adfFacesContext = AdfFacesContext.getCurrentInstance();     adfFacesContext.addPartialTarget(parent);  }

    Read the article

< Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >