Search Results

Search found 15249 results on 610 pages for 'tv shows'.

Page 132/610 | < Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >

• Is 50% download speed on a wireless G network normal?

  - by Bartlomiej Skwira

  I have a wired connection of about 36Mb/s, but my wireless speed is max at about 18-19Mb/s. I have a WRT54G-TM (T-Mobile, 802.11G) router with DD-WRT firmware - I've upgraded it to latest build. Done some settings changes: changed channel - 13 wireless network mode - G-only ACK Timing - 0 Fragmentation Threshold and RTS Threshold - 2304 Basic Rate - All Signal/Noise ratio: -46/-94, signal quality ~50-60%. Is this normal with G networks? Edit: The AP is located about 2 meters from laptop, no walls or metal objects, but its next to a TV. I've done a channel scan (had problems locating it, go to "Status - Wireless - Site survey" - lame naming) and everybody else is on channels 1 and 6. Switched to channel 11 but it didn't help. As for trasmit power I got best results with default 71mw. The antenna might be a factor, I'm using the default 2 antennas.

  Read the article

• What are these completely random images that pop up when using Recuva?

  - by Qubert

  I just used Recuva to get back some photos I accidentally deleted on C:, but I also noticed there's a bunch of COMPLETELY random images in the list of recoverable files I can choose from. An example would be, There are images with names like John_Doe.jpg with a file path somewhere out of C:/Windows/Assembly/ And some of these things don't even make sense, there's one called componentsSpriteImage with the path C:/?/Images that shows a "poster" from the TV series Gold Rush. I am completely lost on this.. I know the OS is on C:, but I can't really think of a reason why Microsoft would leave a image hanging around from Gold Rush.

  Read the article

• Installed Memory (RAM): 8GB (4GB Useable)

  - by Mike Bannister

  I have 4X 2GB RAM sticks installed, Windows 7 Ultimate x64 shows "Installed Memory (RAM): 8GB (4GB Useable)" in the system information. The motherboard says it supports up to 16GB of memory. I had Windows XP x64 and I'm pretty sure it was able to use all 8Gigs of memory. I've just formatted and am not burning through 4GB for sure. *The BIOS only show 4096MB while booting. I was only able to find one option relating to memory mapping and it took it from 4Gigs to 3 and change. CPU-Z shows all 4 sticks as 2048MB I went in to msconfig and checked the limits, they are not set. I tried resetting the CPU and RAM sticks 3 times, the CPU has no pins to be bent (flat contacts, I5) I rearranged all the RAM. I have separate video memory from the system memory. I have a 64 bit OS (I am 100% certain) Hardware: Memory: Four Corsair XMS3 TW3X4G1333C9AG Motherboard: Asus P7P55D Pro CPU: Intel Core i5-760 BX80605I5760 Graphics: Two ZOTAC ZT-50401-10L GeForce GTX 550 Ti If anyone has new ideas or knows the exact setting in the bios, it would be greatly appreciated.

  Read the article

• Two folders with identical names causing many problems.

  - by R. A. Chaucer

  In my 'Documents' folder (Win7) I have two folders with names that appear in Explorer to be identical, though their contents are different. I can rename them both to something else (eg: 'Test') and Explorer doesn't complain. The dir listing that cmd.exe and powershell gives me only lists one of them, but also lists this suspicious entry: 20/04/2010 12:16 PM <DIR> ???? Even if I rename the folders to have unique names, one of them still shows up as ???? in cmd.exe. Desktop.ini in my Documents folder doesn't contain anything out of the ordinary. Both folders appear to be read-only in their properties panel, and if I untick the read-only box it will ask me if I want to apply the action recursively, but either way when I close the panel and open it again the folder is once again read-only. They are both set to not inherit permissions. The folder that shows up correctly in the cmd.exe dir listing is the "real" one, the other seems to be automatically created when a program tries to access it. How is this possible?This is driving me nuts!

  Read the article

• How can I create a macro that acts on a relative reference rather than an absolute reference to cell A1?

  - by Bruce

  I have a master rent statement in an Excel 2007 (macro enabled) spreadsheet that shows all tenants in rows with columns formed by the months. Each tenant then has a separate rent statement sheet like the one below that pulls the data through from the master rent statement and all I do then is to copy the last 4 columns to the right and add them to the right, just renaming the month labelled as ‘rent due’ with the current month and then hiding the previous last 4 columns to the left so that the statement always shows the previous month's activity and the amount due for the current month: I used a macro to speed up the creation of these statements, but then found that in some cases the result was wrong and needed major correction because the macro use absolute references i.e. its starting position was relative to cell A1 whereas some of my rent worksheets commence from a different column and in some cases from a different column and a different row. I have tried recording the macro with 'Use relative references' but when trying to use the macro it only gets part way through its operation before it stops and the message appears: Run time error '1004' Application defined or object defined error with the option to End or Debug or go to Help and then I'm stuck as I don't know how to debug and work in VBA or understand what has gone wrong. I want to record a single macro that always remains relative to the last 'Total Due' column heading (in the sample, it’s cell FF3 but on another worksheet could be cell GA26) and thus enables me regardless of where on the worksheet the rent statement is placed to add through my recorded macro a further four columns with updated dates and a repositioned 'Total Due' summary (in the sample in cells FE23 and FF23). The contents of cells FE23 and FE22 are always the same number of rows from the 'Sample Rent Statement, Service Charge and Sub Total' rows. I've searched on the web and in the help files of Excel 2007 but have been totally stumped by this, so currently I have to re-record a quantity of macros each month to cover all of the permutations of the worksheets in my Excel rent workbook, which is starting to become pointless in terms of saving time. Does someone know a solution to this problem please?!

  Read the article

• Windows 7 boot manager not localized on UEFI systems

  - by Massimo

  I originally posted this on SuperUser because I discovered this behaviour on my home computer, but this seems to be a general issue on UEFI systems, thus I'm posting here too; I also hope someone here can shed some light on what's going on. Italian version of Windows 7 x64 SP1, same installation media used for both situations. When running on BIOS systems, the boot manager is fully localized, both for the loading screen and for the F8 boot menu. When running on UEFI systems, the boot manager always runs in English, even if it's correctly configured to use the it-IT locale, as BCDEDIT clearly shows: Windows Boot Manager -------------------- identificatore {bootmgr} device partition=\Device\HarddiskVolume1 path \EFI\Microsoft\Boot\bootmgfw.efi description Windows Boot Manager locale it-IT inherit {globalsettings} default {current} resumeobject {9ef36aa6-4188-11e3-909d-d32f0c3871c8} displayorder {current} toolsdisplayorder {memdiag} timeout 30 Caricatore di avvio di Windows ------------------- identificatore {current} device partition=C: path \Windows\system32\winload.efi description Windows 7 locale it-IT inherit {bootloadersettings} recoverysequence {9ef36aa8-4188-11e3-909d-d32f0c3871c8} recoveryenabled Yes osdevice partition=C: systemroot \Windows resumeobject {9ef36aa6-4188-11e3-909d-d32f0c3871c8} nx OptIn I also noticed something strange here; the motherboard setup shows "Windows Boot Manager" as the main boot option, while the actual boot disk is listed as the second one. Looks like the Windows Boot Manager is actually being loaded from somewhere else than the first partition of the first disk... what's going on here? Update I've also checked the EFI boot manager using bcdedit /enum FIRMWARE. That one looks correctly localized, too: Boot Manager per firmware --------------------- identificatore {fwbootmgr} displayorder {bootmgr} {9ef36aa4-4188-11e3-909d-d32f0c3871c8} {a30e8550-47e4-11e3-9ad1-806e6f6e6963} timeout 1 Windows Boot Manager -------------------- identificatore {bootmgr} device partition=\Device\HarddiskVolume1 path \EFI\Microsoft\Boot\bootmgfw.efi description Windows Boot Manager locale it-IT inherit {globalsettings} default {current} resumeobject {9ef36aa6-4188-11e3-909d-d32f0c3871c8} displayorder {current} toolsdisplayorder {memdiag} timeout 30 Applicazione firmware (101fffff) ------------------------------- identificatore {9ef36aa4-4188-11e3-909d-d32f0c3871c8} description CD/DVD Drive Applicazione firmware (101fffff) ------------------------------- identificatore {a30e8550-47e4-11e3-9ad1-806e6f6e6963} description Hard Drive

  Read the article

• Having an issue trying to get Gigabit speed across my network (Ubuntu Server)

  - by user94217

  I've just started looking into the network speeds at my office, the entire network is setup to be "Gigabit". This includes Gb switches, Gb Network cards and Cat 5e cabling. I'm not expecting the full speed, I just want more than ~90 Mb/s. I've been running some tests with iperf the linux tools and checking the hardware with ethtool. I have 3 servers and when doing my checks/test I discovered that the two backup servers can access each other at around 450 Mb/s but when using either one of them to connect and test the main server, I only get the 90Mb/s even though ethtool shows the networking card running at 1000/Full. The only difference between all the server/networking cards is the "Port" which ethtool shows. On the two backup servers the "Port" is shown as MII yet on the other it's shown as "Twisted Pair". When using ethtool -s to manually set the "Port" to MII on the main server, it looses all connectivity and does not show "Speed" or "Duplex". Anyway, Am i doing something wrong? Is there a specific reason my main server cannot use Gb when there appears to be no difference except the "Port"?

  Read the article

• How can I get all my itunes files from multiple computers onto my new PC?

  - by jasondavis

  Managing my itunes files (music,video,tv shows, iphone apps) is a really hard task and I have not had much luck yet. If I had a single PC for the rest of my life with the same hard drive, it would work great but infortunately it cannot be that simple. I just build a new PC as my old hard drive crashed with all my itunes purchased songs, video, etc. So is there anyway to get itunes to recognize that I own all them and let me re-download everything? As I see it so far, it knows what I own by my itunes account login (it knows if I purchased a file or not ever) but does not seem to let you just re-download everything to a new PC or new hard drive. I realize I should of had backups but I didn't. My backup plan is a work in process and it is getting much better but that doesnt help with my situation at the moment. So I am asking for any help, ideas of how to retrieve all my previous itunes purchases?

  Read the article

• zune - how do i make the PC zune download a movie, not stream it?

  - by bharal

  As the title suggests - I have bought a tv show series season on PC Zune. My gf watched the show, and now i'd like to be able to watch the show too. The catch - i'm going to go overseas on a trip soon, and i'd like to be able to watch the show from outside the US. Given that Zune won't let me stream things overseas (past experience, anyway), I would like to download the show to my computer and watch it that way. The problem is that although the full season has been "watched" it appears it was only streamed, not downloaded. Or rather, that one episode was downloaded, and the rest streamed. I bought a season pass (so all the episodes at once) and the show was bought, not rented. How do i make Zune download, not stream, a show?

  Read the article

• ImageMagick installation confusion

  - by Codemonkey

  Well this is turning out to be a pain. I'm on CentOS 6.5. I saw on the PECL ImageMagick changelog that they added a load of constants for new filters, such as LANCZOS2SHARP. Some testing I did earlier suggested that PhotoShop 6.5 was able to downsize photos with better clarity than my current ImageMagick's best effort of LANCZOS, so I thought I'd try to upgrade to test out the newer filters. So, first port of call - get source from pecl for 3.2.0RC1. Installed with no problems. But, ah-ha. Although it says it only requires IM 6.2.4, the filters I'm after don't work unless you have 6.6.6+ So I go http://www.imagemagick.org/script/install-source.php to install the newest version. This is the bit that's puzzled me. It all appears to have installed fined. The tests work fine, passing 40 out of 40. If I run identify -version on the command line it outputs 6.8.9 But if I echo Imagick::getVersion() in PHP it shows 6.5.4, even after restarting php-fpm. rpm -qa | grep ImageMagick shows that I still have 6.5.4 installed locate ImageMagic also only seems to show the 6.5.4 one I feel that the missing link here is ImageMagick-devel, do I need to install that too? How do I go about doing that? Or do I just need to reinstall the pecl-imagemagick 3.2.0RC1 now that I have the latest IM installed?

  Read the article

• How to fix missing RAID1 drive

  - by Sodved

  I had to do some fiddling about with my cables inside thebox and now I am getting a "Critical Error" about the RAID disks during startup. I have a gigabyte GA-MA770T-UD3 motherboard. Aparently the RAID controller is an AMD SB710 chip. I'm pretty sure I know what happenned. The first time I rebooted I had forgotten the power cable on one of the disks in the RAID1 (mirror) and let it boot up. So I shut down and put the power back in. So now when it boots up I go into the RAID admin interface (between the BIOS screen and the OS loading): it shows the RAID1 as in error the logical device has one disk and says the other is disconnected or missing the other physical disk shows up as a single disk If I boot to the OS (Windows 7 32 bit) the data all seems to be there. If I go into computer management it says my partition is on a disk and working OK. But the other disk is offline because: "The disk is offline because it has a signature collision with another disk that is online" So I am guessing because I STUPIDLY booted up with only one of the disks powered on, the other disk fell out of synch with the mirror and so now cannot rejoin the mirror. How do I fix this? I want to get the RAID1 mirror working again. There does not appear to be any "Repair" option in the basic RAID admin tool which I get into during startup before the OS boots. I have not made any explicit changes to the online one (but I guess the OS has probably written some admin data).

  Read the article

• SSL configuration issue. SSL/IIS7 not loading all scripts/CSS on user's first visit

  - by Chris

  Hi all, Hopefully this isnt a tricky one. I've got a web app that doesn't load all javascript/css/images on the first visit. Second visit is fine. After approximately 2 minutes of inactivity the problem reoccurs. These problems only started occuring after the customer requested SSL be applied to the application. Ajax requests stop working after 2 minutes of activity despite a successful page load of all javascript elements. Application timeout is 30 minutes - like I said, everything was fine before SSL was applied. All javascript and CSS files use absolute URLS - e.g https://blablabla There appears to be no pattern as to why certain files arent loaded. The firebug Net output shows the status for the failed elements as 'Aborted'. For example, site.css and nav.css are in the same folder, are declared after each other in the head tag yet one is loaded and the other is not. Both will load fine after refreshing the page (unless roughly two minutes have passed). An Ajax request also shows as aborted after two minutes. However, if i do the request again the Ajax request will succeed. Almost as if the first request woke something up. None of these problems occur in Chrome Any ideas? FYI this is a .Net 4 C# MVC app running under IIS7 but I'm not sure its relevant since it works in Chrome. Everything worked fine before SSL was applied. Originally posted on stackoverflow but recommended to list here. Can provide additional details if necessary.

  Read the article

• Increase Volume of an MKV Video from Linux Terminal

  - by The How-To Geek

  I've got a large amount of .MKV video files which seem to all play at a very low volume - I end up having to turn the TV up all the way to hear them, which is really irritating when I switch to another channel and wake the dead because it's so loud. What I'm looking for is a command-line method to increase the volume (so I can run it on all of them quickly) that would hopefully work regardless of the audio codec in use in the particular file. (I don't mind hard-coding the output audio though). For reference, I'm using Ubuntu 9.04 on my server, and the files are being played back with Boxee on a Mac Mini, but the volume problem is the same on Windows too.

  Read the article

• Moving an "all-in-one" PC when turned on/off

  - by Purak

  I have an "all-in-one" pc. I know that moving a pc when it is switched on is harmful to the hardware components. What I would like to know is if the same applies to "all-in-one" pc's and if the same applies to regularly moving it from one side of the room to the other when it is turned off! The reason for the question is that I work on one desk during the day, and in the evening move it to the couch so I can do other stuff while watching TV or something. I always turn it off before the move, but somebody told me that I can be damaging the machine by doing so. Can anybody shed some light on this? Many thanks

  Read the article

• Can I use my old Sony Handycam TRV815 as a web cam?

  - by Optimal Solutions

  Has anyone ever used their old Sony Handycam (or maybe any older hand-held camcorder) as a web cam? As in streaming the live video from the cam to a web server (local or remote/Internet). My TRV815 has a pretty darn good picture quality for its time.. Via USB or Ethernet. It has S-Video but I think that is input. It has RCA out (white/red for audio and yellow for video) and I have used that to display to my TV. I have web cams already but was wondering if I could put this one to use also just for kicks..

  Read the article

• Increase Volume of an MKV Video from Linux Terminal

  - by The How-To Geek

  I've got a large amount of .MKV video files which seem to all play at a very low volume - I end up having to turn the TV up all the way to hear them, which is really irritating when I switch to another channel and wake the dead because it's so loud. What I'm looking for is a command-line method to increase the volume (so I can run it on all of them quickly) that would hopefully work regardless of the audio codec in use in the particular file. (I don't mind hard-coding the output audio though). For reference, I'm using Ubuntu 9.04 on my server, and the files are being played back with Boxee on a Mac Mini, but the volume problem is the same on Windows too.

  Read the article

• 1024x768 gone (1024x600 availble) on HDMI, yesterday it worked?

  - by Gam Erix

  When I try to play a game called F-22 Total Air War 2.0 I get an error which says that the resolution 1024.768 is unsupported by the harware.. so I look into my desktop options and it looks like there is an option for 800x600, 1024x600, 1152x648 and higher wide screen resolutions but the 1024x768 is gone? I did play the game yezterday, I disconnected the HDMI, got upstairs, played a few more games, came back downstairs, plugged in the HDMI, launched the game and bam I got the error! I have a ATI Radeon Mobility HD5470 and the newest ATI Catalyst Center downloaded 3 days ago. How can I 'enable' the 1024x768 resolution again? Without it I can't play the game on my Big TV and I will be stuck with my little laptop screen.

  Read the article

• Move 2TB Win7x64 to 640GB HDD

  - by reedacus25

  Basically I just got a new (refurbished) HP H8-1260t to use for Windows Media Center. The shipping drive is a 2TB Hitachi drive, but I have an older and barely used 640GB WD Caviar Blue 7200RPM drive I would like to move my Windows install to. I have about 750GB of data with over 1TB free left on the drive. Having googled my heart and fingers out, I would think that I can shrink my partition down to the size it is full at now with over 1TB free for a second partition where I can move my media files to further shrink my boot partition so that I can fit a system image smaller than 640GB on that WD drive. I want to have a separate drive for Media and TV Recordings from my boot disk. Does this sound like the easiest method for me? Or am I doing this all wrong. Help appreciated.

  Read the article

• I don't have a free PCI / PCI-e slot, can it be worked around?

  - by Borek

  I need to add a PCI(e) card to a nettop PC that is so small that the card won't fit there (and there is no external alternative like we're used to with external TV tuners). The only ports available are USB and eSATA, is it possible to somehow "dock" the PCI card into some device that would then connect to the PC via USB or eSATA? Or am I out of luck? (I don't mind the solution being visually ugly, I wouldn't even mind opening up the case and soldering some wires in, anything that would work would be great.)

  Read the article

• Data recovery on working hard drive

  - by emgee

  So I have a 5 bay hot swap SATA enclosure that's connected to a Silicon Image-based SATA adapter in a computer. It's running XP Pro. There are two 1.5TB hard drives in slots 1 and 2 respectively, set up using RAID 1 using the the Silicon Image utility. There are also two 1TB drives in bays 3 and 4, also set to RAID 1 the same way. The partitions for both RAID arrays are Dynamic partitions. A few days back, there was a bare hard drive that needed some files copied off of, so it was popped it in bay 5, that bay to pass-through, and the copied data off of it. Later, I noticed that my 1.5TB drives no longer showed up in windows. In the Silicon Image utility, the drives showed up fine, no error. However, in Device Manager, it shows the RAID 1 array as uninitialized. It shows up as the right size, etc., but nothing else. There's no sign of anything wrong with either drive, so I'm not sure what happened exactly. I'm not the only one who has access to that computer, so it is possible there is something else done to it that I don't know of. There's quite a lot of data on it still, and if at all possible, I'd prefer to not send it to Ontrack. Does anyone know of software that would restore the partitions, keeping in mind that it's a Windows LDM partition? I have access to a variety of Operating Systems, so something that would work on Mac, Windows or Linux would be acceptable. The programs I usually use are not compatible with LDM.

  Read the article

• Python 2.7 and Ubuntu 10.10: X11 fails

  - by c.a.p.

  Against every recommendation I have apt-get remove python in Ubuntu 10.10 (build 2.6.24-29-server x86_64) and apt-get install python2.7 Some built-in software with python2.6 dependencies (like firefox, other minor stuff) was fixed just by apt-get reinstalling or reinstalling from source and the system was stable for one day until I rebooted. Upon booting I got the message "ubuntu is running in low-graphics mode" I have an NVIDIA Quadro NVS 295 256 running on a HP Z600 Workstation so I sudoed: apt-get --purged nvidia* apt-get --purged xserver apt-get install linux-headers-generic apt-get install nvidia-* apt-get install xserver-xorg dpkg-reconfigure xserver-xorg nvidia-xconfig upon rebooting i get the same "ubuntu is running in low-graphics mode" if I decide to tell the boot menu to restart X, the Ubuntu 10.10 "load screen" shows up and does not do anything for hours. If I "X" the screen remains black for hours; ctrl-c shows that /etc/X11/xorg.conf did not produce any errors just a warning "Type "ONE_LEVEL"...". /var/log/Xorg.0.log issues the following warnings (no errors) (WW) AllowEmptyInput is on (WW) NVIDIA(0): UBB is incompatible If I "startX" I get /usr/bin/python: can't find '__main__.py"' in '/usr/share/command-not-found' Before re-installing xserver-xorg however "startX" ran, just by changing the resolution of the tty1 console. Any hints?

  Read the article

• "Permission denied" & 500 Internal Server error serving PHP in Mac OS X

  - by Abhic

  I just set up Web Sharing in Mac OS X 10.6.2 Snow Leopard. My httpd.conf allows for ExecCGI and all the folders and files are readable by everybody and even writable by me. I put a simple Hello World in index.php in my base site and yet my apache error log shows this: [Thu Mar 18 00:17:18 2010] [error] [client 192.168.11.135] (13)Permission denied: exec of '/Users/abhic/Sites/index.php' failed [Thu Mar 18 00:17:18 2010] [error] [client 192.168.11.135] Premature end of script headers: index.php <html> <head> <title> Hello </title> </head> <body> <?php echo "Hello"; ?> </body> </html> is what my index.php looks like placed in /Users/abhic/Sites My browser shows a 500 Internal Server Error Any help would do me good in the middle of the night. I have been trying to solve this for way too long. Thank you.

  Read the article

• SSD won't boot anymore

  - by LordrAider

  Yesterday I put the computer to sleep. Something went wrong because it didn't go fully to sleep. So I restarted the pc and now it won't boot windows 7 anymore. It said : "Please insert valid boot device". I ran Windows 7 restore disc and tried restoring, first it said, mbr fixed. No result but now it said : "Operating system could not be loaded" I ran Windows 7 restore disc again and then it said something about a corrupt partition and that he fixed it. But got the same msg at restart about operating system not found. I ran Windows 7 restore disc again and used diskpart and watched the volumes. My SSD shows up as RAW filesystem... not as NTFS. The size of the disk seems correct. In the bios it also shows up as Healthy disk. What could went wrong and could I recover data with testdisk? I assume something went wrong with the partition :(. It's a Plextor SSD 256M2P SSD, only 3 months old. Thx in advance

  Read the article

• How would I Enable FTP on Home PC (Win7)?

  - by jp2code

  In my home, all PCs connect through a small router. Some wired and some wireless. Our Media PC (HTPC) is controlled via a Media Center TV style remote, so managing files on it is tedious. I can access all of the files on the HTPC from my desktop PC, but moving a 6 GB file from \\HTPC\Folder1 to \\HTPC\Folder2 involves copying the data to the desktop and then transferring it back. If I were on the HTPC, this would likely be handled by a simple address change for the file (i.e. it would be done almost instantly). I'm thinking if I could get an FTP program to connect to the HTPC, I could simplify things ...but how do I enable that ability on the HPTC? Then, how would I go about connecting to the HTPC? Would I simply enter \\HTPC as the FTP address?

  Read the article

• Manage 2 displays remotely

  - by neurino

  I have a pc with a nVidia Quadro graphic card. The card has 2 DisplayPort outs where 2 40" Full HD TV are connected. I need to run 2 separate fullscreen videos, one each display. The problem is displays are far from the pc station and I cannot control them from there. I tried with a remote desktop connection but when I connect screen 1 shows login and screen 2 simply blackens (I'm logged off). The pc, an HP, also has his native graphics card still installed it would be nice if I could connect there a 15" monitor with the desktop on and use the TVs only as secondary where I can send fullscreen videos. Any clue?

  Read the article

< Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >