Search Results

Search found 6497 results on 260 pages for 'minimum spanning tree'.

Page 133/260 | < Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >

• Chipset GPU causes a massive slowdown

  - by zyboxenterprises

  My AMD Radeon HD 7700 recently broke (fan stopped working and GPU overheated), and now I'm running on internal chipset graphics, and it causes a massive slowdown of the whole PC. I've changed the graphics memory from 32MB (minimum) to 256MB (highest), and it hasn't made any difference whatsoever. I'm using Windows Aero, and disabling it should have made a small difference, but it didn't; the whole PC is still slow. I know that it's not the computer build, because I built it myself, and it was a lot faster when it had the AMD Radeon HD 7700 in it, which is the reason why I believe it's the internal chipset graphics that are causing the problem. Is this behavior normal? I don't have the cash right now to go out and buy a new dedicated GPU. I'm using an ASRock N68C-GS FX motherboard with an AMD FX 4100 (overclocked to 4.3GHZ), with 4GB RAM. The overclock was an attempt to resolve this issue, and it isn't related to this issue that the integrated graphics is causing a slowdown.

  Read the article

• Meaning of tcp_delack_min

  - by Phi

  Hi, the current Linux Kernel (e.g. 2.6.36) uses Delayed Acknowledgments (delack). In /include/net/tcp.h it says: define TCP_DELACK_MIN ((unsigned)(HZ/25)) So, for a Kernel using a HZ value of 1000, an ACK should be delayed by a minimum of 40 ms. However, RFC 2581 says a TCP implementation should acknowledge every second full sized segment without further delay. Does anybody know whether the Linux Kernel follows that 'should' or whether the TCP_DELACK_MIN value means that even after a full sized segment was received, the ACK continues to be delayed until 40 ms have passed?

  Read the article

• Cisco ASA 5505 inside interface multiple ip addresses

  - by Oneiroi

  I have an issue this morning where I want to be able to assign multiple ip addresses to the inside interface to facilitate an ip range migration for an office. Namely from a 192.168.1.x range to the new range, with the minimum of interruption for those working in the office. (New DHCP leases will use the new range, whilst those still on the 192.168.1.x range can continue to work until their lease is renewed). However I can not for the life of me figure out how to achieve this, trying to create multiple interfaces for the job leads to complaints about the license only allowing 2 active interfaces. Any suggestions? thanks in advance.

  Read the article

• 2 DSL lines...any benefit?

  - by EJB

  I have verizon DSL in my office, I put DSL in about a year ago for $29.95 month...I added a new phone line recently and it was cheaper to actually get it bundled with DSL so now I have two DSL lines...my plan was to shut the first one off when my 1 year contract comes up (in September). A couple of times DSL has gone out on one line so I just used the other, which is a nice redundancy to have - but it doesn't happen often. (I unplugged one line and plugged in the other) Question is, is there any way to use both DSL lines together so that 1) I can increase bandwidth and effective speed might increase (is that possible?) or 2) have them both on and connected someway so that traffic on my network would just use either one, and if one went down the traffic would route automatically? If I can either increase speed by having two, or at a minimum get some automatic redundancy, I see no reason to keep both on.... Thanks!

  Read the article

• How to efficiently dump a huge MySQL innodb database?

  - by Jagbir

  I got an Ubuntu 10.04 production MySQL database server where total size of database is 260 GB while size of root partition is itself 300 GB where DB is stored, essentially means around 96% of / is full and there's no space left for storing dump/backup etc. No other disk is attached to server as of now. My task is to migrate this database to other server sitting in different datacenter. Question is how to do that efficiently with minimum downtime? I'm thinking in line of: Request to attach an extra drive to server and take a dump in that drive. Transfer dump to new server, restore it and make new server slave of existing one to keep data in sync When migration is needed, break replication, update slave config to accept read/write requests and make old server read-only so it won't entertain any write requests and tell app developers to update there config with new IP address for db. What's your suggestions to improve this or any alternate better approach for this task?

  Read the article

• High shmmax value in Redhat 6.3

  - by xpapad

  We are using Redhat 6.3 with 30G RAM to host our Postgres server. The (default) shmmax value is 68,719,476,736 In some forums I have read that having an shmmax value larger than the RAM causes extensive paging, but in the Redhat forums it warns against changing a kernel parameter that is already configured to a value larger than the minimum requirements for an environment. In ServerFault I've read that this probably has no impact. So is there any impact of having shmmax value RAM in a DB server, or the kernel understands this and handles it appropriately? Thanks

  Read the article

• Minimal Linux distribution with sshd and apt

  - by Sergey Mikhanov

  When I signed up for my Debian Linux VPS hosting and first logged on and invoked ps, there was the only user process running: sshd. As I can see, this was minimal Linux with only two things installed and configured: sshd and apt (plus all dependencies, of course). I want to build (or use existing) similar Linux distro, any advice on how to build (or pick) one? Googling "minimum linux", or "linux with sshd only" usually brings up Debian's netinstall, which is not what I want. Thanks in advance.

  Read the article

• duplicate video stream using a router (?)

  - by Dani

  I have a viedo stream coming from one site, I want to do the following with the minimum delay possible: I want to duplicate the stream (inside the router - preferred) and send it to a few more locations one of them is local network and the rest - on other networks. I want to be able to do it to several streams simultaneously. Is it possible to do this - using network devices only ? What device is capable to do this ? (I can always record the stream and rebroadcast it - but that's a lot of delay, I'm looking for functionality that similar to port duplicating, but on higher layers). Thanks.

  Read the article

• How to change resolution in Ubuntu 10.04, where xvinfo is showing no adapters present?

  - by YumYum

  I am trying to maximize my resolution where I have Resolution: 800x600 (4:3) and Refresh rate: 61Hz I tried the following, but it did not work: $ xvinfo X-Video Extension version 2.2 screen #0 no adaptors present $ cvt 1920 1080 # 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync $ xrandr --newmode clever_name 173.00 1920 2048 2248 2576 1080 1083 1088 1120 $ xrandr -q Screen 0: minimum 640 x 480, current 800 x 600, maximum 800 x 600 default connected 800x600+0+0 0mm x 0mm 800x600 61.0* 640x480 60.0 clever_name (0x11d) 173.0MHz h: width 1920 start 2048 end 2248 total 2576 skew 0 clock 67.2KHz v: height 1080 start 1083 end 1088 total 1120 clock 60.0Hz $ xrandr --addmode default clever_name $ xrandr --output default --mode clever_name xrandr: Configure crtc 0 failed

  Read the article

• Why does HDTune report better performing drives 2 months after installing them?

  - by Rolnik

  OK, so this is really weird. I ran HDTune on a newly set-up home-built computer and got the following readings from my drives in mid-November. SSD 154 MB/s RAID1 87 RAID0 198 (software installs) RAID0 98 Swap drive Today, in January, I run HDTune (same version) and get these results, in MB/s: SSD 186 RAID1 98 RAID0 241 RAID0 98 (Swap drive) Here are more details that HDTune reports on the SSD drive: HD Tune: OCZ-VERTEX Benchmark Blockquote Transfer Rate Minimum : 135.4 MB/sec Transfer Rate Maximum : 219.4 MB/sec Transfer Rate Average : 185.7 MB/sec Access Time : 0.1 ms Burst Rate : 187.3 MB/sec CPU Usage : -1.0% To get to my question: Why are my hard drives improving in performance? Most of my logical drives are in some form of RAID, except for the SSD. Will this performance ever deteriorate? Note, none of my drives are a hybrid drive that uses some form of SSD to enhance the write/reads on actual platters.

  Read the article

• Which server requirment for a Redmine, Git and website hosting?

  - by Ephismen

  Me and 9 other students are going to start a project that will last a minimum of 2 years, for this purpose we are looking to host all our work on a server. Here are a few tools we would like to work with: Redmine GIT Hosting a website/blog to show our work Hosting an internal and private development website/blog We haven't decided yet which OS we will install, but we were looking toward Ubuntu or Fedora. Having a limited budget, 300$/year, we would like to have some advices on the following dedicated server specifications: Kimsufi 2G: Hardware: Intel Celeron/Atom, 1.20 Ghz, 64 bits, 2Gb DDR2, HDD 1 To, Backup FTP 100Gb Network: Connection 100 Mbps, Illimited trafic Dedibox SC: Hardware: Dell Nano U2250, 1x 1,6GHz, 64 bits, 2Gb DDR2, HDD 160 Gb Network: Connection 1Gbit/sec, Illimited trafic Will these server be sufficient? Should we host the websites on another platform? Would a virtualized server be more appropriate? Thank you for your answers, Ephismen.

  Read the article

• Free / Cached / Available memory on Linux

  - by pkoraca

  I have read that linux uses free memory for caching, to make system faster. However, both Nagios and Paessler PRTG monitoring system show me that my memory usage is critical. I could change Nagios mem_usage script to sum free and cached memory, but would that be correct information? I doubt that they misunderstood Linux memory usage. Lets say I have 8 GB RAM. 5 GB are used, 2 GB is cached, and I have 1 GB of free memory. Real available memory should be free+cached (3 GB)? If some new application would need additional 3 GB RAM, could it take everything from cache and free without using swap, or is there a minimum that should be in cache? Real example: $ cat /proc/meminfo MemTotal: 5984256 kB MemFree: 137052 kB Buffers: 140484 kB Cached: 3439616 kB SwapCached: 244 kB Active: 3148824 kB Inactive: 2341768 kB ... My monitoring tools show that I have 137 MB free RAM, however I have ~3,5 GB in Cache. Thanks!

  Read the article

• FreeBSD 9 (amd64) reboot/shutdown process is very slow

  - by nbari

  I have a Dell Poweredge 2900 III with FreeBSD 9 (amd64), the server uses mfi wich handles a raid10, I had to reboot the server, but notice that either when rebooting or shutting down the server, something is going wrong, besides taking to much time to reboot/shutdown, after rebooting I notice that that some ldap instances within some jails could'nt start and this was because the database was corrupted. This make me think that probably something was wrong with the disks or mfi card, but checking the disk array / logs everything seems to be working fine. My set up is something like this: Host server has the minimum base of FreeBSD 9 amd64, within I create some jails, the ones contain services like mysql, email, and some others ldap. With FreeBSD 7 and 8 I didn't notice this behavior but with FreeBSD 9 something is not working well. I did a clean installation of FreeBSD 9 and root filesystem is using ZFS. Attached is an image hoping some one can give me a hint of what to check or any kind of advice. reboot capture screen image

  Read the article

• Compaq Presario V2000 Vista/7 trial virtualization

  - by James Schweninger

  I am currently studying for an A-Plus certification to which was recently added troubleshooting Windows 7 to the exam. You also have to be very familiar with Vista as well. I only have XP on my Compaq Presario V2000, but I wanted to set it up ( I believe I have the minimum requirements for both ) so that I could run trial versions of Vista and 7 virtually.Windows 2000 is also on the exam. Is there an easy legal way to do this? I wouldn't mind partitioning my HDD for the four operating systems either. Thnx if you have any ideas, JLS

  Read the article

• Can expire_logs_days be less than 1 day in MySQL?

  - by Scott

  So... yesterday I received an "after the fact email" about a campaign that has started for one of the services that I run. Now the DB server is getting hammered, hard, to the tune of about 300mb/min in binary logging for the replicate. As you could imagine, this is chewing up space at a fairly tremendous rate. My normal 7 day expiry of binary logs just isn't cutting it. I've resorted to truncating logs to just the last for 4 hours with(I'm verifying that replication is up to date with mk-heartbeat): PURGE MASTER LOGS BEFORE DATE_SUB( NOW(), INTERVAL 4 HOUR); I'm just running that from cron every few hours to weather the storm, but it made me question the minimum value for expire_logs_days. I haven't come across a value that is less than 1, but that doesn't mean that it isn't possible. http://dev.mysql.com/doc/refman/5.0/en/server-system-variables.html#sysvar_expire_logs_days gives the type as being numeric, but doesn't indicate if it's expecting integers.

  Read the article

• Is my new Graphic Card cause for my PC hanging?

  - by Anirudha

  My Computer Specification My Motherboard specification My new Graphic Card Some days ago I bought a GeForce 8400 GS Graphic card. My computer satisfied all the minimum system requirements it required. After installing the Card in PCI Express Slot I started the computer. But it now hangs at the POST screen i.e.(the first screen when the PC loads). It hangs at Checking NVRAM. I had checked the graphic card on other PC and its works perfectly. So I think there's no problem in the Graphic card. If I remove my graphic card and run my PC with built in Graphic card, my PC works and doesn't hang. So, what can be the problem? Thanks for reading....

  Read the article

• How to interconnect laptop, PC, Android & Symbiam phones with WiFi?

  - by noquery

  What I have Level One wifi Router hub Laptop with Windows 7 (wifi enabled) Desktop PC with Windows 7 (with no wifi, maybe LAN cables can help) 2 android & 1 Symbian Phones each wifi enabled. LAN Cables Hathway Internet connection which allows only 1 login to access internet What I want Is it possible to access internet on PC, laptop, mobiles at the same time with only one connection? Since I don't know even A of networking so please suggest some software which require minimum cofiguration. Let me know if any other hardware I require.

  Read the article

• How are cached Windows credentials stored on the local machine?

  - by MDMarra

  How are cached Active Directory domain credentials stored on a Windows client? Are they stored in the local SAM database, thus making them susceptible to the same rainbow table attacks that local user accounts are susceptible to, or are they stored differently? Note, that I do realize that they are salted and hashed, so as not to be stored in plain-text, but are they hashed in the same way as local accounts and are they stored in the same location? I realize that at a minimum they're be susceptible to a brute force attack, but that's a much better situation than being vulnerable to rainbow tables in the event of a stolen machine.

  Read the article

• Run application with other user

  - by user62367

  OS: Fedora 14 GUI: GNOME I need to run an application with another user then the "default" (normally used). Purpose: create a ".desktop" file on my desktop to run e.g.: Google Chrome with another user (NOT ROOT! - so beesu doesn't count.) There aren't any gksu, or kdesu packages in Fedora 14. Why? So i want to create a user with "adduser SOMEONE", and i want to run e.g.: Google Chrome with "SOMEONE" - then it will have minimum permissions, "more security". Thank you!

  Read the article

• Repairing a TFS 2005 install or starting anew.

  - by Johan Buret

  Following : Installing Team Foundation Server on a shared database instance We did use a shared database instance setup for TFS 2005, and that was not a good idea, because of the Reporting Service dependency. The reporting instance on the server gives error code 404. What works now Basic source code control. We're able to check in and out source code. What doesn't work : Everything else, including : Opening and creating new team projects. Build automation. Internal bug tracking. Goal setup Having a fully working TFS install, and keeping the history. 1) A full install of TFS 2005 on the same server, but within its own database and reporting instance. 2) Using another server might be an option, but it's really not prefered Downtime should be minimum, my colleagues needs to be able to work on the source Readings I've read the MSDN page about moving/restoring TFS 2005, but I'm still unsure about what to do. Thanks in advance for help

  Read the article

• A space-efficient filesystem for grow-as-needed virtual disks ?

  - by Steve Schnepp

  A common practice is to use non-preallocated virtual disks. Since they only grow as needed, it makes them perfect for fast backup, overallocation and creation speed. Since file systems are usually based on physical disks they have the tendency to use the whole area available1 in order to increase the speed2 or reliability3. I'm searching a filesystem that does the exact opposite : try to touch the minimum blocks need by an aggressive block reuse. I would happily trade some performance for space usage. There is already a similar question, but it is rather general. I have very specific goal : space-efficiency. 1. Like page caching uses all the free physical memory 2. Canonical example : online defragmentation 3. Canonical example : snapshotting

  Read the article

• Which SQL Server edition?

  - by StaringSkyward

  We need a new install of windows server and sql server to replicate a couple of databases to a geographically separate location from an existing application (over a site-to-site VPN). The source database is SQL Server 2005. However, this is a temporary solution since the client is aiming to implement a different system entirely, so we are looking to find the minimum specification of both windows server and sql server to do this. We are finding the SQL server features per edition and licensing a little difficult to understand, hence the question. Am I correct in thinking that we can replicate data using transactional replication from SQL Server 2005 to 2008 web edition and we can install sql server web edition on windows 2008 web edition also? Thanks.

  Read the article

• How to make the Microsoft Word 2010 web install version completely download itself?

  - by Paperflyer

  I installed Microsoft Word 2010 using the handy web installation feature. The way this works is that Word installs a bare minimum of functionality and any time it needs a feature that has not been downloaded yet, it will download it in-place just as needed. The thing is, this is stalling Word every few minutes. Every few minutes, Word takes a small nap while it tries to find some obscure feature somewhere. This is really annoying. Is there a way to just tell the thing to completely download itself? This was a nice functionality for the trial but it is extremely annoying in actual use.

  Read the article

• Everytime I ping my server, it is pinging localhost instead?

  - by esac

  I recently setup a new server for use with SQL. When I tried to connect via SSMS remotely, it failed. When I pinged it, it is pinging localhost, what is going on here? Please let me know if more details will help. It is Windows Server 2008. C:\>ping 0x7F000001 Pinging 127.0.0.1 with 32 bytes of data: Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Ping statistics for 127.0.0.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms

  Read the article

• Mounting Solaris UFS partition on Debian(with FreeBSD kernel)

  - by hayalci

  I have some disks that were being used on a Solaris system. The disks are formatted as UFS. I attached them to a Debian system (with FreeBSD kernel. Debian/kFreeBSD), but I cannot mount them. $ mount -t ufs /dev/da2s1 /mnt/diska mount: /dev/da2s1 : Invalid argument Also the tunefs.ufs does not work; $ tunefs.ufs -p /dev/da2s1 tunefs.ufs: /dev/da2s1: could not read superblock to fill out disk Is there an incompatibility between FreeBSD UFS and Solaris UFS? Is it possible to mount one, under the other OS ? Note: tunefs.ufs works on the root partition $ tunefs.ufs -p /dev/da7s2 tunefs.ufs: ACLs: (-a) disabled tunefs.ufs: MAC multilabel: (-l) disabled tunefs.ufs: soft updates: (-n) disabled tunefs.ufs: gjournal: (-J) disabled tunefs.ufs: maximum blocks per file in a cylinder group: (-e) 2048 tunefs.ufs: average file size: (-f) 16384 tunefs.ufs: average number of files in a directory: (-s) 64 tunefs.ufs: minimum percentage of free space: (-m) 8% tunefs.ufs: optimization preference: (-o) time tunefs.ufs: volume label: (-L)

  Read the article

< Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >