null route - Page 133 - Developer IT

L2TP iptables port forward

- by The_cobra666

Hi all, I'm setting up port forwarding for an L2TP VPN connection to the local Windows 2003 VPN server. The router is a simpel Debian machine with iptables. The VPN server works perfect. But I cannot log in from the WAN. I'm missing something. The VPN server is using a pre-shared key (L2TP) and give's out an IP in the range: 192.168.3.0. Local network range is 192.168.2.0/24 I added the route: with route add -net 192.168.3.0 netmask 255.255.255.240 gw 192.168.2.13 (the vpn server) iptables -t nat -A PREROUTING -p udp --dport 1701 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 1701 -j ACCEPT iptables -t nat -A PREROUTING -p udp --dport 500 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 500 -j ACCEPT iptables -t nat -A PREROUTING -p udp --dport 4500 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 4500 -j ACCEPT iptables -t nat -A PREROUTING -p 50 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p 50 -j ACCEPT iptables -t nat -A PREROUTING -p 51 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p 51 -j ACCEPT The whole iptables script is (without the line's from above): echo 1 > /proc/sys/net/ipv4/ip_forward echo 1 > /proc/sys/net/ipv4/tcp_syncookies #Flush table's iptables -F INPUT iptables -F OUTPUT iptables -F FORWARD iptables -t nat -F #Drop traffic iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT ACCEPT #verkeer naar buiten toe laten en nat aanzetten iptables -A FORWARD -i eth0 -o eth1 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE #RDP forward voor windows servers iptables -t nat -A PREROUTING -p tcp --dport 3389 -i eth0 -j DNAT --to 192.168.2.10:3389 iptables -A FORWARD -p tcp --dport 3389 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 3340 -i eth0 -j DNAT --to 192.168.2.12:3340 iptables -A FORWARD -p tcp --dport 3340 -j ACCEPT #toestaan SSH verkeer iptables -t nat -A PREROUTING -p tcp --dport 22 -i eth0 -j DNAT --to-destination 192.168.2.1 iptables -A INPUT -p tcp --dport 22 -j ACCEPT #toestaan verkeer loopback iptables -A INPUT -i lo -j ACCEPT #toestaan lokaal netwerk iptables -A INPUT -i eth1 -j ACCEPT #accepteren established traffic iptables -A INPUT -i eth0 --match state --state RELATED,ESTABLISHED -j ACCEPT #droppen ICMP boodschappen iptables -A INPUT -p icmp -i eth0 -m limit --limit 10/minute -j ACCEPT iptables -A INPUT -p icmp -i eth0 -j REJECT ifconfig eth1 192.168.2.1/24 ifconfig eth0 XXXXXXXXXXXXX/30 ifconfig eth0 up ifconfig eth1 up route add default gw XXXXXXXXXXXXXXXXXXX route add -net 192.168.3.0 netmask 255.255.255.240 gw 192.168.2.13

Read the article

Encouter error "Linux ip -6 addr add failed" while setting up OpenVPN client

- by Mickel

I am trying to set up my router to use OpenVPN and have gotten quite far (I think), but something seems to be missing and I am not sure what. Here is my configuration for the client: client dev tun proto udp remote ovpn.azirevpn.net 1194 remote-random resolv-retry infinite auth-user-pass /tmp/password.txt nobind persist-key persist-tun ca /tmp/AzireVPN.ca.crt remote-cert-tls server reneg-sec 0 verb 3 OpenVPN client log: Nov 8 15:45:13 rc_service: httpd 15776:notify_rc start_vpnclient1 Nov 8 15:45:14 openvpn[27196]: OpenVPN 2.3.2 arm-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [EPOLL] [MH] [IPv6] built on Nov 1 2013 Nov 8 15:45:14 openvpn[27196]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Nov 8 15:45:14 openvpn[27196]: Socket Buffers: R=[116736->131072] S=[116736->131072] Nov 8 15:45:14 openvpn[27202]: UDPv4 link local: [undef] Nov 8 15:45:14 openvpn[27202]: UDPv4 link remote: [AF_INET]178.132.75.14:1194 Nov 8 15:45:14 openvpn[27202]: TLS: Initial packet from [AF_INET]178.132.75.14:1194, sid=44d80db5 8b36adf9 Nov 8 15:45:14 openvpn[27202]: WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this Nov 8 15:45:14 openvpn[27202]: VERIFY OK: depth=1, C=RU, ST=Moscow, L=Moscow, O=Azire Networks, OU=VPN, CN=Azire Networks, name=Azire Networks, [email protected] Nov 8 15:45:14 openvpn[27202]: Validating certificate key usage Nov 8 15:45:14 openvpn[27202]: ++ Certificate has key usage 00a0, expects 00a0 Nov 8 15:45:14 openvpn[27202]: VERIFY KU OK Nov 8 15:45:14 openvpn[27202]: Validating certificate extended key usage Nov 8 15:45:14 openvpn[27202]: ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication Nov 8 15:45:14 openvpn[27202]: VERIFY EKU OK Nov 8 15:45:14 openvpn[27202]: VERIFY OK: depth=0, C=RU, ST=Moscow, L=Moscow, O=AzireVPN, OU=VPN, CN=ovpn, name=ovpn, [email protected] Nov 8 15:45:15 openvpn[27202]: Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Nov 8 15:45:15 openvpn[27202]: Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Nov 8 15:45:15 openvpn[27202]: Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Nov 8 15:45:15 openvpn[27202]: Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Nov 8 15:45:15 openvpn[27202]: Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 2048 bit RSA Nov 8 15:45:15 openvpn[27202]: [ovpn] Peer Connection Initiated with [AF_INET]178.132.75.14:1194 Nov 8 15:45:17 openvpn[27202]: SENT CONTROL [ovpn]: 'PUSH_REQUEST' (status=1) Nov 8 15:45:17 openvpn[27202]: PUSH: Received control message: 'PUSH_REPLY,ifconfig-ipv6 2a03:8600:1001:4010::101f/64 2a03:8600:1001:4010::1,route-ipv6 2000::/3 2A03:8600:1001:4010::1,redirect-gateway def1 bypass-dhcp,dhcp-option DNS 194.1.247.30,tun-ipv6,route-gateway 178.132.77.1,topology subnet,ping 3,ping-restart 15,ifconfig 178.132.77.33 255.255.255.192' Nov 8 15:45:17 openvpn[27202]: OPTIONS IMPORT: timers and/or timeouts modified Nov 8 15:45:17 openvpn[27202]: OPTIONS IMPORT: --ifconfig/up options modified Nov 8 15:45:17 openvpn[27202]: OPTIONS IMPORT: route options modified Nov 8 15:45:17 openvpn[27202]: OPTIONS IMPORT: route-related options modified Nov 8 15:45:17 openvpn[27202]: OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified Nov 8 15:45:17 openvpn[27202]: TUN/TAP device tun0 opened Nov 8 15:45:17 openvpn[27202]: TUN/TAP TX queue length set to 100 Nov 8 15:45:17 openvpn[27202]: do_ifconfig, tt->ipv6=1, tt->did_ifconfig_ipv6_setup=1 Nov 8 15:45:17 openvpn[27202]: /usr/sbin/ip link set dev tun0 up mtu 1500 Nov 8 15:45:18 openvpn[27202]: /usr/sbin/ip addr add dev tun0 178.132.77.33/26 broadcast 178.132.77.63 Nov 8 15:45:18 openvpn[27202]: /usr/sbin/ip -6 addr add 2a03:8600:1001:4010::101f/64 dev tun0 Nov 8 15:45:18 openvpn[27202]: Linux ip -6 addr add failed: external program exited with error status: 254 Nov 8 15:45:18 openvpn[27202]: Exiting due to fatal error Any ideas are most welcome!

Read the article

Dynamic DNS with Comcast

- by colithium

I've just recently moved across town. Previously, I had Dynamic DNS set up so I could remotely connect to my desktop (primarily to use TightVNC). My ISP was Comcast and I'm in the Denver, Colorado area. Currently, I'm still with Comcast and still in Denver. My router connects to the internet just fine and my Dynamic DNS record over at DynDNS did get updated with my router's current external IP address. So my router, DynDNS, and public DNS records all agree what my IP address is. However, I can't actually connect to anything from the outside world. My trace route to Google looks something like: Tracing route to google.com [74.125.19.147] 1 3 ms 1 ms 1 ms 192.168.1.1 (this is the internal IP address of my router) 2 * * * Request timed out. 3 9 ms 8 ms 10 ms te-8-2-ur02.wheatridge.co.denver.comcast.net [68.85.221.177] 4 12 ms 12 ms 19 ms te-0-8-0-2-ar02.aurora.co.denver.comcast.net [68.86.103.97] 5 16 ms 13 ms 11 ms pos-0-3-0-0-cr01.denver.co.ibone.comcast.net [68.86.91.1] 6 28 ms 28 ms 27 ms pos-0-9-0-0-cr01.dallas.tx.ibone.comcast.net [68.86.85.174] 7 29 ms 27 ms 28 ms pos-0-1-0-0-pe01.1950stemmons.tx.ibone.comcast.net [68.86.86.94] 8 66 ms 108 ms * 75.149.231.70 9 65 ms 68 ms 93 ms 72.14.233.77 10 67 ms 66 ms 66 ms 72.14.233.111 11 67 ms 67 ms 69 ms 216.239.43.144 12 68 ms 71 ms 73 ms 209.85.249.30 13 66 ms 66 ms 68 ms nuq04s01-in-f147.1e100.net [74.125.19.147] This is what the trace route looks like from an outside source to my DynDNS domain name: traceroute to 98.245.67.65 (98.245.67.65) 1 illuminati-130 138.67.130.61 2 138.67.63.253 138.67.63.253 3 vermiculite 138.67.253.20 4 csm-ct-gw 138.67.253.244 5 138.67.253.2 138.67.253.2 6 ge-7-24-ar01.denver.co.denver.comcast.net 68.86.128.17 7 te-0-4-0-0-ar02.denver.co.denver.comcast.net 68.86.179.21 8 te-9-3-ur01.wheatridge.co.denver.comcast.net 68.86.103.18 9 * * * {Times Out} Now my guess is, whatever is sitting just beyond my router (what the modem connects to) is gumming things up. Even though the routes aren't EXACTLY the same, that appears to be the spot that the trace route either stops or doesn't get a response. My question is, for Comcast networks (particularly in Denver), what would be the device that typically sits there? Is there anything I can do about it? That device seems to not respond to PING but does forward it along when I'm going outwards. But it looks like it eats it when the request is coming in. It's hard to prove that from these logs but I'm assuming that's the case because my router used to accept connections from the outside and I haven't changed anything on it.

Read the article

SQL SERVER – Quiz and Video – Introduction to Hierarchical Query using a Recursive CTE

- by pinaldave

This blog post is inspired from SQL Queries Joes 2 Pros: SQL Query Techniques For Microsoft SQL Server 2008 – SQL Exam Prep Series 70-433 – Volume 2.[Amazon] | [Flipkart] | [Kindle] | [IndiaPlaza] This is follow up blog post of my earlier blog post on the same subject - SQL SERVER – Introduction to Hierarchical Query using a Recursive CTE – A Primer. In the article we discussed various basics terminology of the CTE. The article further covers following important concepts of common table expression. What is a Common Table Expression (CTE) Building a Recursive CTE Identify the Anchor and Recursive Query Add the Anchor and Recursive query to a CTE Add an expression to track hierarchical level Add a self-referencing INNER JOIN statement Above six are the most important concepts related to CTE and SQL Server. There are many more things one has to learn but without beginners fundamentals one can’t learn the advanced concepts. Let us have small quiz and check how many of you get the fundamentals right. Quiz 1) You have an employee table with the following data. EmpID FirstName LastName MgrID 1 David Kennson 11 2 Eric Bender 11 3 Lisa Kendall 4 4 David Lonning 11 5 John Marshbank 4 6 James Newton 3 7 Sally Smith NULL You need to write a recursive CTE that shows the EmpID, FirstName, LastName, MgrID, and employee level. The CEO should be listed at Level 1. All people who work for the CEO will be listed at Level 2. All of the people who work for those people will be listed at Level 3. Which CTE code will achieve this result? WITH EmpList AS (SELECT Boss.EmpID, Boss.FName, Boss.LName, Boss.MgrID, 1 AS Lvl FROM Employee AS Boss WHERE Boss.MgrID IS NULL UNION ALL SELECT E.EmpID, E.FirstName, E.LastName, E.MgrID, EmpList.Lvl + 1 FROM Employee AS E INNER JOIN EmpList ON E.MgrID = EmpList.EmpID) SELECT * FROM EmpList WITH EmpListAS (SELECT EmpID, FirstName, LastName, MgrID, 1 as Lvl FROM Employee WHERE MgrID IS NULL UNION ALL SELECT EmpID, FirstName, LastName, MgrID, 2 as Lvl ) SELECT * FROM BossList WITH EmpList AS (SELECT EmpID, FirstName, LastName, MgrID, 1 as Lvl FROM Employee WHERE MgrID is NOT NULL UNION SELECT EmpID, FirstName, LastName, MgrID, BossList.Lvl + 1 FROM Employee INNER JOIN EmpList BossList ON Employee.MgrID = BossList.EmpID) SELECT * FROM EmpList 2) You have a table named Employee. The EmployeeID of each employee’s manager is in the ManagerID column. You need to write a recursive query that produces a list of employees and their manager. The query must also include the employee’s level in the hierarchy. You write the following code segment: WITH EmployeeList (EmployeeID, FullName, ManagerName, Level) AS ( –PICK ANSWER CODE HERE ) SELECT EmployeeID, FullName, ” AS [ManagerID], 1 AS [Level] FROM Employee WHERE ManagerID IS NULL UNION ALL SELECT emp.EmployeeID, emp.FullName mgr.FullName, 1 + 1 AS [Level] FROM Employee emp JOIN Employee mgr ON emp.ManagerID = mgr.EmployeeId SELECT EmployeeID, FullName, ” AS [ManagerID], 1 AS [Level] FROM Employee WHERE ManagerID IS NULL UNION ALL SELECT emp.EmployeeID, emp.FullName, mgr.FullName, mgr.Level + 1 FROM EmployeeList mgr JOIN Employee emp ON emp.ManagerID = mgr.EmployeeId Now make sure that you write down all the answers on the piece of paper. Watch following video and read earlier article over here. If you want to change the answer you still have chance. Solution 1) 1 2) 2 Now compare let us check the answers and compare your answers to following answers. I am very confident you will get them correct. Available at USA: Amazon India: Flipkart | IndiaPlaza Volume: 1, 2, 3, 4, 5 Please leave your feedback in the comment area for the quiz and video. Did you know all the answers of the quiz? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Joes 2 Pros, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Dynamips and Tap Devices, To and From the same machine

- by Kyle Brandt

I am setting up a dynamips/dynagen lab and am wondering if there is any way to get traffic to route out one tap devices, go into the lab, and come back to a tap device on the same machine. I have tried host specific routes as well as removing the route created when I give the tun device an ip via ifconfig. With both of these, traffic always preferes the attached devices and won't go through my lab. Any way to make this work without a separate machine or vm?

Read the article

default gateway and tracert

- by chappar

when i do "route print" on my machine, it shows my default gateway as 10.225.150.1 but when i do tracert www.google.com, the first machine it reaches is 10.225.150.2. The route command does not show any entry for 10.225.150.2. So, why tracert is showing 10.225.150.2? my maching is on Windows XP.

Read the article

Allowing connections initiated from outside

- by Mark S. Rasmussen

I've got an old Juniper SSG5 running ScreenOS 5.4.0r6.0. Once a day, more or less, it'll start randomly dropping packets at a rate of ~5-10%. We currently solve this issue by simply rebooting the unit, after which it resumes working in perfect condition. As this error has started appearing randomly, without any configuration or hardware changes, I'm assuming I've got an aging unit about to fail. As such, I've got a replacement SSG5 running ScreenOS 6.0. I've dumped the config on the 5.4 and imported it into a clean 6.0, and it seems to gladly accept it, and all my configuration seems to be A-OK. However, upon connecting the new unit, all outside-initiated connections seem to be blocked. If I browse our external IP from the inside, everything works perfectly, and it's not just port 80, SSH, Crashplan - all of our policies route correctly. All normal networking, initiated from the inside, work perfectly as well. If on the other hand I browse our external IP from the outside, everything is blocked. Barring differences between ScreenOS 5.4 and 6.0, the config is identical. Is there a setting somewhere that defines whether outside/inside initiated connections are allowed? unset key protection enable set clock timezone 1 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set service "MyVOIP_UDP4569" protocol udp src-port 0-65535 dst-port 4569-4569 set service "MyVOIP_TCP22" protocol tcp src-port 0-65535 dst-port 22-22 set service "MyRDP" protocol tcp src-port 0-65535 dst-port 3389-3389 set service "MyRsync" protocol tcp src-port 0-65535 dst-port 873-873 set service "NZ_FTP" protocol tcp src-port 0-65535 dst-port 40000-41000 set service "NZ_FTP" + tcp src-port 0-65535 dst-port 21-21 set service "PPTP-VPN" protocol 47 src-port 2048-2048 dst-port 2048-2048 set service "PPTP-VPN" + tcp src-port 1024-65535 dst-port 1723-1723 set service "NZ_FMS_1935" protocol tcp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_1935" + udp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_8080" protocol tcp src-port 0-65535 dst-port 8080-8080 set service "CrashPlan Server" protocol tcp src-port 0-65535 dst-port 4280-4280 set service "CrashPlan Console" protocol tcp src-port 0-65535 dst-port 4282-4282 unset alg sip enable set alg appleichat enable unset alg appleichat re-assembly enable set alg sctp enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin name "netscreen" set admin password "XXX" set admin auth web timeout 10 set admin auth dial-in timeout 3 set admin auth server "Local" set admin format dos set vip multi-port set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "MGT" block unset zone "V1-Trust" tcp-rst unset zone "V1-Untrust" tcp-rst set zone "DMZ" tcp-rst unset zone "V1-DMZ" tcp-rst unset zone "VLAN" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface ethernet0/0 phy full 100mb set interface ethernet0/3 phy full 100mb set interface ethernet0/4 phy full 100mb set interface ethernet0/5 phy full 100mb set interface ethernet0/6 phy full 100mb set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Null" set interface "bgroup0" zone "Trust" set interface "bgroup1" zone "Trust" set interface "bgroup2" zone "Trust" set interface bgroup2 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup1 port ethernet0/5 set interface bgroup1 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 215.173.182.18/29 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup1 ip 192.168.2.1/24 set interface bgroup1 nat set interface bgroup2 ip 192.168.3.1/24 set interface bgroup2 nat set interface ethernet0/0 gateway 215.173.182.17 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup1 ip manageable set interface bgroup2 ip manageable set interface bgroup0 manage mtrace unset interface bgroup1 manage ssh unset interface bgroup1 manage telnet unset interface bgroup1 manage snmp unset interface bgroup1 manage ssl unset interface bgroup1 manage web unset interface bgroup2 manage ssh unset interface bgroup2 manage telnet unset interface bgroup2 manage snmp unset interface bgroup2 manage ssl unset interface bgroup2 manage web set interface ethernet0/0 vip 215.173.182.19 2048 "PPTP-VPN" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4280 "CrashPlan Server" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4282 "CrashPlan Console" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.22 22 "MyVOIP_TCP22" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 4569 "MyVOIP_UDP4569" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 3389 "MyRDP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 873 "MyRsync" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 80 "HTTP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 2048 "PPTP-VPN" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 8080 "NZ_FMS_8080" 192.168.2.216 set interface ethernet0/0 vip 215.173.182.22 + 1935 "NZ_FMS_1935" 192.168.2.216 set interface bgroup0 dhcp server service set interface bgroup1 dhcp server service set interface bgroup2 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup1 dhcp server auto set interface bgroup2 dhcp server auto set interface bgroup0 dhcp server option domainname companyalan set interface bgroup0 dhcp server option dns1 192.168.1.131 set interface bgroup1 dhcp server option domainname companyblan set interface bgroup1 dhcp server option dns1 192.168.2.202 set interface bgroup2 dhcp server option dns1 8.8.8.8 set interface bgroup2 dhcp server option wins1 8.8.4.4 set interface bgroup0 dhcp server ip 192.168.1.2 to 192.168.1.116 set interface bgroup1 dhcp server ip 192.168.2.2 to 192.168.2.116 set interface bgroup2 dhcp server ip 192.168.3.2 to 192.168.3.126 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup1 dhcp server config next-server-ip unset interface bgroup2 dhcp server config next-server-ip set interface "ethernet0/0" mip 215.173.182.21 host 192.168.2.202 netmask 255.255.255.255 vr "trust-vr" set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set flow tcp-mss unset flow tcp-syn-check unset flow tcp-syn-bit-check set flow reverse-route clear-text prefer set flow reverse-route tunnel always set pki authority default scep mode "auto" set pki x509 default cert-path partial set pki x509 dn name "[email protected]" set dns host dns1 0.0.0.0 set dns host dns2 0.0.0.0 set dns host dns3 0.0.0.0 set address "Trust" "192.168.1.0/24" 192.168.1.0 255.255.255.0 set address "Trust" "192.168.2.0/24" 192.168.2.0 255.255.255.0 set address "Trust" "192.168.3.0/24" 192.168.3.0 255.255.255.0 set crypto-policy exit set ike respond-bad-spi 1 set ike ikev2 ike-sa-soft-lifetime 60 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set vrouter "untrust-vr" exit set vrouter "trust-vr" exit set l2tp default ppp-auth chap set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit set policy id 1 exit set policy id 2 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "PPTP-VPN" permit traffic set policy id 2 exit set policy id 3 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "HTTP" permit log set policy id 3 set service "MyRDP" set service "MyRsync" set service "MyVOIP_TCP22" set service "MyVOIP_UDP4569" exit set policy id 6 from "Trust" to "Trust" "192.168.1.0/24" "192.168.2.0/24" "ANY" deny set policy id 6 exit set policy id 7 from "Trust" to "Trust" "192.168.2.0/24" "192.168.1.0/24" "ANY" deny set policy id 7 exit set policy id 8 from "Trust" to "Trust" "192.168.3.0/24" "192.168.1.0/24" "ANY" deny set policy id 8 exit set policy id 9 from "Trust" to "Trust" "192.168.3.0/24" "192.168.2.0/24" "ANY" deny set policy id 9 exit set policy id 10 from "Untrust" to "Trust" "Any" "MIP(215.173.182.21)" "NZ_FTP" permit set policy id 10 exit set policy id 11 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "PPTP-VPN" permit set policy id 11 exit set policy id 12 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "NZ_FMS_1935" permit set policy id 12 set service "NZ_FMS_8080" exit set policy id 13 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "CrashPlan Console" permit set policy id 13 set service "CrashPlan Server" exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 unset license-key auto-update set telnet client enable set snmp port listen 161 set snmp port trap 162 set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit Note that I've previously posted a similar question (pertaining to the same device & replacement, but ultimately caused by a malfunctioning switch, and thus clouding the current issue): Outbound traffic being blocked for MIP/VIPped servers (Juniper SSG5)

Read the article

kerio load balance

- by Azzam

I use kerio winroute 6.5 , for week ago, i got a second adsl link (2 mbps), i tried to configue the load balancing in kerio , but always , kerio directs the traffic to one route without the other , i enabled NAT for firewall and change the rate between 2 links but always kerio takes the system route to one link , is there a solution for that ?

Read the article

Green (Screen) Computing

- by onefloridacoder

I recently was given an assignment to create a UX where a user could use the up and down arrow keys, as well as the tab and enter keys to move through a Silverlight datagrid that is going be used as part of a high throughput data entry UI. And to be honest, I’ve not trapped key codes since I coded JavaScript a few years ago. Although the frameworks I’m using made it easy, it wasn’t without some trial and error. The other thing that bothered me was that the customer tossed this into the use case as they were delivering the use case. Fine. I’ll take a whack at anything and beat up myself and beg (I’m not beyond begging for help) the community for help to get something done if I have to. It wasn’t as bad as I thought and I thought I would hopefully save someone a few keystrokes if you wanted to build a green screen for your customer. Here’s the ValueConverter to handle changing the strings to decimals and then back again. The value is a nullable valuetype so there are few extra steps to take. Usually the “ConvertBack()” method doesn’t get addressed but in this case we have two-way binding and the converter needs to ensure that if the user doesn’t enter a value it will remain null when the value is reapplied to the model object’s setter. 1: using System; 2: using System.Windows.Data; 3: using System.Globalization; 4: 5: public class NullableDecimalToStringConverter : IValueConverter 6: { 7: public object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture) 8: { 9: if (!(((decimal?)value).HasValue)) 10: { 11: return (decimal?)null; 12: } 13: if (!(value is decimal)) 14: { 15: throw new ArgumentException("The value must be of type decimal"); 16: } 17: 18: NumberFormatInfo nfi = culture.NumberFormat; 19: nfi.NumberDecimalDigits = 4; 20: 21: return ((decimal)value).ToString("N", nfi); 22: } 23: 24: public object ConvertBack(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture) 25: { 26: decimal nullableDecimal; 27: decimal.TryParse(value.ToString(), out nullableDecimal); 28: 29: return nullableDecimal == 0 ? null : nullableDecimal.ToString(); 30: } 31: } The ConvertBack() method uses TryParse to create a value from the incoming string so if the parse fails, we get a null value back, which is what we would expect. But while I was testing I realized that if the user types something like “2..4” instead of “2.4”, TryParse will fail and still return a null. The user is getting “puuu-lenty” of eye-candy to ensure they know how many values are affected in this particular view. Here’s the XAML code. This is the simple part, we just have a DataGrid with one column here that’s bound to the the appropriate ViewModel property with the Converter referenced as well. 1: <data:DataGridTextColumn 2: Header="On-Hand" 3: Binding="{Binding Quantity, 4: Mode=TwoWay, 5: Converter={StaticResource DecimalToStringConverter}}" 6: IsReadOnly="False" /> Nothing too magical here. Just some XAML to hook things up. Here’s the code behind that’s handling the DataGridKeyup event. These are wired to a local/private method but could be converted to something the ViewModel could use, but I just need to get this working for now. 1: // Wire up happens in the constructor 2: this.PicDataGrid.KeyUp += (s, e) => this.HandleKeyUp(e); 1: // DataGrid.BeginEdit fires when DataGrid.KeyUp fires. 2: private void HandleKeyUp(KeyEventArgs args) 3: { 4: if (args.Key == Key.Down || 5: args.Key == Key.Up || 6: args.Key == Key.Tab || 7: args.Key == Key.Enter ) 8: { 9: this.PicDataGrid.BeginEdit(); 10: } 11: } And that’s it. The ValueConverter was the biggest problem starting out because I was using an existing converter that didn’t take nullable value types into account. Once the converter was passing back the appropriate value (null, “#.####”) the grid cell(s) and the model objects started working as I needed them to. HTH.

Read the article

how can I specify interleaved vertex attributes and vertex indices

- by freefallr

I'm writing a generic ShaderProgram class that compiles a set of Shader objects, passes args to the shader (like vertex position, vertex normal, tex coords etc), then links the shader components into a shader program, for use with glDrawArrays. My vertex data already exists in a VertexBufferObject that uses the following data structure to create a vertex buffer: class CustomVertex { public: float m_Position[3]; // x, y, z // offset 0, size = 3*sizeof(float) float m_TexCoords[2]; // u, v // offset 3*sizeof(float), size = 2*sizeof(float) float m_Normal[3]; // nx, ny, nz; float colour[4]; // r, g, b, a float padding[20]; // padded for performance }; I've already written a working VertexBufferObject class that creates a vertex buffer object from an array of CustomVertex objects. This array is said to be interleaved. It renders successfully with the following code: void VertexBufferObject::Draw() { if( ! m_bInitialized ) return; glBindBuffer( GL_ARRAY_BUFFER, m_nVboId ); glBindBuffer( GL_ELEMENT_ARRAY_BUFFER, m_nVboIdIndex ); glEnableClientState( GL_VERTEX_ARRAY ); glEnableClientState( GL_TEXTURE_COORD_ARRAY ); glEnableClientState( GL_NORMAL_ARRAY ); glEnableClientState( GL_COLOR_ARRAY ); glVertexPointer( 3, GL_FLOAT, sizeof(CustomVertex), ((char*)NULL + 0) ); glTexCoordPointer(3, GL_FLOAT, sizeof(CustomVertex), ((char*)NULL + 12)); glNormalPointer(GL_FLOAT, sizeof(CustomVertex), ((char*)NULL + 20)); glColorPointer(3, GL_FLOAT, sizeof(CustomVertex), ((char*)NULL + 32)); glDrawElements( GL_TRIANGLES, m_nNumIndices, GL_UNSIGNED_INT, ((char*)NULL + 0) ); glDisableClientState( GL_VERTEX_ARRAY ); glDisableClientState( GL_TEXTURE_COORD_ARRAY ); glDisableClientState( GL_NORMAL_ARRAY ); glDisableClientState( GL_COLOR_ARRAY ); glBindBuffer( GL_ARRAY_BUFFER, 0 ); glBindBuffer( GL_ELEMENT_ARRAY_BUFFER, 0 ); } Back to the Vertex Array Object though. My code for creating the Vertex Array object is as follows. This is performed before the ShaderProgram runtime linking stage, and no glErrors are reported after its steps. // Specify the shader arg locations (e.g. their order in the shader code) for( int n = 0; n < vShaderArgs.size(); n ++) glBindAttribLocation( m_nProgramId, n, vShaderArgs[n].sFieldName.c_str() ); // Create and bind to a vertex array object, which stores the relationship between // the buffer and the input attributes glGenVertexArrays( 1, &m_nVaoHandle ); glBindVertexArray( m_nVaoHandle ); // Enable the vertex attribute array (we're using interleaved array, since its faster) glBindBuffer( GL_ARRAY_BUFFER, vShaderArgs[0].nVboId ); glBindBuffer( GL_ELEMENT_ARRAY_BUFFER, vShaderArgs[0].nVboIndexId ); // vertex data for( int n = 0; n < vShaderArgs.size(); n ++ ) { glEnableVertexAttribArray(n); glVertexAttribPointer( n, vShaderArgs[n].nFieldSize, GL_FLOAT, GL_FALSE, vShaderArgs[n].nStride, (GLubyte *) NULL + vShaderArgs[n].nFieldOffset ); AppLog::Ref().OutputGlErrors(); } This doesn't render correctly at all. I get a pattern of white specks onscreen, in the shape of the terrain rectangle, but there are no regular lines etc. Here's the code I use for rendering: void ShaderProgram::Draw() { using namespace AntiMatter; if( ! m_nShaderProgramId || ! m_nVaoHandle ) { AppLog::Ref().LogMsg("ShaderProgram::Draw() Couldn't draw object, as initialization of ShaderProgram is incomplete"); return; } glUseProgram( m_nShaderProgramId ); glBindVertexArray( m_nVaoHandle ); glDrawArrays( GL_TRIANGLES, 0, m_nNumTris ); glBindVertexArray(0); glUseProgram(0); } Can anyone see errors or omissions in either the VAO creation code or rendering code? thanks!

Read the article

Copying a chunk of output in Windows 7

- by syuusuke

Hello, I'm wondering how to copy a chunk of output in the command prompt in Windows 7. What I'm ultimately trying to accomplish is when I type "route print" I want to copy the IPs listed under IPv4 Route Table. I used the findstr command to grab 1 line at a time but is there a way to grab the whole table in one shot? Thanks,

Read the article

Basic OpenVPN setup not working

- by WalterJ89

I am attempting to connect 2 win7 (x64+ x32) computers (there will be 4 in total) using OpenVPN. Right now they are on the same network but the intention is to be able to access the client remotely regardless of its location. The Problem I am having is I am unable to ping or tracert between the two computers. They seem to be on different subnets even though I have the mask set to 255.255.255.0. The server ends up as 10.8.0.1 255.255.255.252 and the client 10.8.0.6 255.255.255.252. And a third ends up as 10.8.0.10. I don't know if this a Windows 7 problem or something I have wrong in my config. Its a very simple set up, I'm not connecting two LANs. this is the server config (removed all the extra lines because it was too ugly) port 1194 proto udp dev tun ca keys/ca.crt cert keys/server.crt key keys/server.key # This file should be kept secret dh keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt client-to-client duplicate-cn keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 6 this is the client config client dev tun proto udp remote thisdomainis.random.com 1194 resolv-retry infinite nobind persist-key persist-tun ca keys/ca.crt cert keys/client.crt key keys/client.key ns-cert-type server comp-lzo verb 6 Is there anything I missed in this? keys are all correct and the vpn's connect fine, its just the subnet or route issue. Thank You EDIT it seems on the server the openvpn-status.log has the routes for the client SERVER OpenVPN CLIENT LIST Updated,Wed May 19 18:26:32 2010 Common Name,Real Address,Bytes Received,Bytes Sent,Connected Since client,192.168.10.102:50517,19157,20208,Wed May 19 17:38:25 2010 ROUTING TABLE Virtual Address,Common Name,Real Address,Last Ref 10.8.0.6,client,192.168.10.102:50517,Wed May 19 17:38:56 2010 GLOBAL STATS Max bcast/mcast queue length,0 END Also this is from the client.log file: Which seems to be correct C:\WINDOWS\system32\route.exe ADD 10.8.0.0 MASK 255.255.255.0 10.8.0.5 Another EDIT 'route print' on the server shows the route: Destination Mask Gateway Interface 10.8.0.0 255.255.255.0 10.8.0.2 10.8.0.1 the same on the client shows 10.8.0.0 255.255.255.0 10.8.0.5 10.8.0.6 So the routes are there.. what can the problem be? Is there anything wrong with my configs? Why would OpenVPN be having problems communicating?

Read the article

Working with Analytic Workflow Manager (AWM) - Part 8 Cube Metadata Analysis

- by Mohan Ramanuja

CUBE SIZEselect dbal.owner||'.'||substr(dbal.table_name,4) awname, sum(dbas.bytes)/1024/1024 as mb, dbas.tablespace_name from dba_lobs dbal, dba_segments dbas where dbal.column_name = 'AWLOB' and dbal.segment_name = dbas.segment_name group by dbal.owner, dbal.table_name, dbas.tablespace_name order by dbal.owner, dbal.table_name SESSION RESOURCES select vses.username||':'||vsst.sid username, vstt.name, max(vsst.value) valuefrom v$sesstat vsst, v$statname vstt, v$session vseswhere vstt.statistic# = vsst.statistic# and vsst.sid = vses.sid andVSES.USERNAME LIKE ('ATTRIBDW_OWN') ANDvstt.name in ('session pga memory', 'session pga memory max', 'session uga memory','session uga memory max', 'session cursor cache count', 'session cursor cache hits', 'session stored procedure space', 'opened cursors current', 'opened cursors cumulative') andvses.username is not null group by vsst.sid, vses.username, vstt.name order by vsst.sid, vses.username, vstt.name OLAP PGA USE select 'OLAP Pages Occupying: '|| round((((select sum(nvl(pool_size,1)) from v$aw_calc)) / (select value from v$pgastat where name = 'total PGA inuse')),2)*100||'%' info from dual union select 'Total PGA Inuse Size: '||value/1024||' KB' info from v$pgastat where name = 'total PGA inuse' union select 'Total OLAP Page Size: '|| round(sum(nvl(pool_size,1))/1024,0)||' KB' info from v$aw_calc order by info desc OLAP PGA USAGE PER USER select vs.username, vs.sid, round(pga_used_mem/1024/1024,2)||' MB' pga_used, round(pga_max_mem/1024/1024,2)||' MB' pga_max, round(pool_size/1024/1024,2)||' MB' olap_pp, round(100*(pool_hits-pool_misses)/pool_hits,2) || '%' olap_ratio from v$process vp, v$session vs, v$aw_calc va where session_id=vs.sid and addr = paddr CUBE LOADING SCRIPT REM The 'set define off' statement is needed only if running this script through SQLPlus.REM If you are using another tool to run this script, the line below may be commented out.set define offBEGIN DBMS_CUBE.BUILD( 'VALIDATE ATTRIBDW_OWN.CURRENCY USING ( LOAD NO SYNCH, COMPILE SORT ), ATTRIBDW_OWN.ACCOUNT USING ( LOAD NO SYNCH, COMPILE SORT ), ATTRIBDW_OWN.DATEDIM USING ( LOAD NO SYNCH, COMPILE SORT ), ATTRIBDW_OWN.CUSIP USING ( LOAD NO SYNCH, COMPILE SORT ), ATTRIBDW_OWN.ACCOUNTRETURN', 'CCCCC', -- refresh methodfalse, -- refresh after errors 0, -- parallelismtrue, -- atomic refreshtrue, -- automatic orderfalse); -- add dimensionsEND;/BEGIN DBMS_CUBE.BUILD( ' ATTRIBDW_OWN.CURRENCY USING ( LOAD NO SYNCH, COMPILE SORT ), ATTRIBDW_OWN.ACCOUNT USING ( LOAD NO SYNCH, COMPILE SORT ), ATTRIBDW_OWN.DATEDIM USING ( LOAD NO SYNCH, COMPILE SORT ), ATTRIBDW_OWN.CUSIP USING ( LOAD NO SYNCH, COMPILE SORT ), ATTRIBDW_OWN.ACCOUNTRETURN', 'CCCCC', -- refresh methodfalse, -- refresh after errors 0, -- parallelismtrue, -- atomic refreshtrue, -- automatic orderfalse); -- add dimensionsEND;/ VISUALIZATION OBJECT - AW$ATTRIBDW_OWN CREATE TABLE "ATTRIBDW_OWN"."AW$ATTRIBDW_OWN" ( "PS#" NUMBER(10,0), "GEN#" NUMBER(10,0), "EXTNUM" NUMBER(8,0), "AWLOB" BLOB, "OBJNAME" VARCHAR2(256 BYTE), "PARTNAME" VARCHAR2(256 BYTE) ) PCTFREE 10 PCTUSED 40 INITRANS 4 MAXTRANS 255 STORAGE ( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT ) TABLESPACE "ATTRIBDW_DATA" LOB ( "AWLOB" ) STORE AS SECUREFILE ( TABLESPACE "ATTRIBDW_DATA" DISABLE STORAGE IN ROW CHUNK 8192 RETENTION MIN 1 CACHE NOCOMPRESS KEEP_DUPLICATES STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) ) PARTITION BY RANGE ( "GEN#" ) SUBPARTITION BY HASH ( "PS#", "EXTNUM" ) SUBPARTITIONS 8 ( PARTITION "PTN1" VALUES LESS THAN (1) PCTFREE 10 PCTUSED 40 INITRANS 4 MAXTRANS 255 STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" LOB ("AWLOB") STORE AS SECUREFILE ( TABLESPACE "ATTRIBDW_DATA" DISABLE STORAGE IN ROW CHUNK 8192 RETENTION MIN 1 CACHE READS LOGGING NOCOMPRESS KEEP_DUPLICATES STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)) ( SUBPARTITION "SYS_SUBP661" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP662" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP663" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP664" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP665" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP666" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP667" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP668" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" ) , PARTITION "PTNN" VALUES LESS THAN (MAXVALUE) PCTFREE 10 PCTUSED 40 INITRANS 4 MAXTRANS 255 STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" LOB ("AWLOB") STORE AS SECUREFILE ( TABLESPACE "ATTRIBDW_DATA" DISABLE STORAGE IN ROW CHUNK 8192 RETENTION MIN 1 CACHE NOCOMPRESS KEEP_DUPLICATES STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)) ( SUBPARTITION "SYS_SUBP669" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP670" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP671" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP672" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP673" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP674" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP675" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP676" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" ) ) ;CREATE UNIQUE INDEX "ATTRIBDW_OWN"."ATTRIBDW_OWN_I$" ON "ATTRIBDW_OWN"."AW$ATTRIBDW_OWN" ( "PS#", "GEN#", "EXTNUM" ) PCTFREE 10 INITRANS 4 MAXTRANS 255 COMPUTE STATISTICS STORAGE ( INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT ) TABLESPACE "ATTRIBDW_DATA" ;CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000406980C00004$$" ON "ATTRIBDW_OWN"."AW$ATTRIBDW_OWN" ( PCTFREE 10 INITRANS 1 MAXTRANS 255 STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" LOCAL (PARTITION "SYS_IL_P711" PCTFREE 10 INITRANS 1 MAXTRANS 255 STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) ( SUBPARTITION "SYS_IL_SUBP695" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP696" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP697" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP698" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP699" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP700" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP701" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP702" TABLESPACE "ATTRIBDW_DATA" ) , PARTITION "SYS_IL_P712" PCTFREE 10 INITRANS 1 MAXTRANS 255 STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) ( SUBPARTITION "SYS_IL_SUBP703" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP704" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP705" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP706" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP707" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP708" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP709" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP710" TABLESPACE "ATTRIBDW_DATA" ) ) PARALLEL (DEGREE 0 INSTANCES 0) ; CUBE BUILD LOG CREATE TABLE "ATTRIBDW_OWN"."CUBE_BUILD_LOG" ( "BUILD_ID" NUMBER, "SLAVE_NUMBER" NUMBER, "STATUS" VARCHAR2(10 BYTE), "COMMAND" VARCHAR2(25 BYTE), "BUILD_OBJECT" VARCHAR2(30 BYTE), "BUILD_OBJECT_TYPE" VARCHAR2(10 BYTE), "OUTPUT" CLOB, "AW" VARCHAR2(30 BYTE), "OWNER" VARCHAR2(30 BYTE), "PARTITION" VARCHAR2(50 BYTE), "SCHEDULER_JOB" VARCHAR2(100 BYTE), "TIME" TIMESTAMP (6)WITH TIME ZONE, "BUILD_SCRIPT" CLOB, "BUILD_TYPE" VARCHAR2(22 BYTE), "COMMAND_DEPTH" NUMBER(2,0), "BUILD_SUB_OBJECT" VARCHAR2(30 BYTE), "REFRESH_METHOD" VARCHAR2(1 BYTE), "SEQ_NUMBER" NUMBER, "COMMAND_NUMBER" NUMBER, "IN_BRANCH" NUMBER(1,0), "COMMAND_STATUS_NUMBER" NUMBER, "BUILD_NAME" VARCHAR2(100 BYTE) ) SEGMENT CREATION IMMEDIATE PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE ( INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT ) TABLESPACE "ATTRIBDW_DATA" LOB ( "OUTPUT" ) STORE AS BASICFILE ( TABLESPACE "ATTRIBDW_DATA" ENABLE STORAGE IN ROW CHUNK 8192 RETENTION NOCACHE LOGGING STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) ) LOB ( "BUILD_SCRIPT" ) STORE AS BASICFILE ( TABLESPACE "ATTRIBDW_DATA" ENABLE STORAGE IN ROW CHUNK 8192 RETENTION NOCACHE LOGGING STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) ) ;CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000407294C00013$$" ON "ATTRIBDW_OWN"."CUBE_BUILD_LOG" ( PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ;CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000407294C00007$$" ON "ATTRIBDW_OWN"."CUBE_BUILD_LOG" ( PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ; CUBE DIMENSION COMPILE CREATE TABLE "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE" ( "ID" NUMBER, "SEQ_NUMBER" NUMBER, "ERROR#" NUMBER(8,0) NOT NULL ENABLE, "ERROR_MESSAGE" VARCHAR2(2000 BYTE), "DIMENSION" VARCHAR2(100 BYTE), "DIMENSION_MEMBER" VARCHAR2(100 BYTE), "MEMBER_ANCESTOR" VARCHAR2(100 BYTE), "HIERARCHY1" VARCHAR2(100 BYTE), "HIERARCHY2" VARCHAR2(100 BYTE), "ERROR_CONTEXT" CLOB ) SEGMENT CREATION DEFERRED PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING TABLESPACE "ATTRIBDW_DATA" LOB ( "ERROR_CONTEXT" ) STORE AS BASICFILE ( TABLESPACE "ATTRIBDW_DATA" ENABLE STORAGE IN ROW CHUNK 8192 RETENTION NOCACHE LOGGING ) ;COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."ID"IS 'Current operation ID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."SEQ_NUMBER"IS 'Cube build log sequence number'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."ERROR#"IS 'Error number being reported'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."ERROR_MESSAGE"IS 'Error text being reported'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."DIMENSION"IS 'Name of dimension being compiled'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."DIMENSION_MEMBER"IS 'Problem dimension member'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."MEMBER_ANCESTOR"IS 'Problem dimension member''s parent'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."HIERARCHY1"IS 'First hierarchy involved in error'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."HIERARCHY2"IS 'Second hierarchy involved in error'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."ERROR_CONTEXT"IS 'Extra information for error'; COMMENT ON TABLE "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"IS 'Cube dimension compile log';CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000407307C00010$$" ON "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE" ( PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE( INITIAL 1048576 NEXT 1048576 MAXEXTENTS 2147483645) TABLESPACE "ATTRIBDW_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ; CUBE OPERATING LOG CREATE TABLE "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG" ( "INST_ID" NUMBER NOT NULL ENABLE, "SID" NUMBER NOT NULL ENABLE, "SERIAL#" NUMBER NOT NULL ENABLE, "USER#" NUMBER NOT NULL ENABLE, "SQL_ID" VARCHAR2(13 BYTE), "JOB" NUMBER, "ID" NUMBER, "PARENT_ID" NUMBER, "SEQ_NUMBER" NUMBER, "TIME" TIMESTAMP (6)WITH TIME ZONE NOT NULL ENABLE, "LOG_LEVEL" NUMBER(4,0) NOT NULL ENABLE, "DEPTH" NUMBER(4,0), "OPERATION" VARCHAR2(15 BYTE) NOT NULL ENABLE, "SUBOPERATION" VARCHAR2(20 BYTE), "STATUS" VARCHAR2(10 BYTE) NOT NULL ENABLE, "NAME" VARCHAR2(20 BYTE) NOT NULL ENABLE, "VALUE" VARCHAR2(4000 BYTE), "DETAILS" CLOB ) SEGMENT CREATION IMMEDIATE PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE ( INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT ) TABLESPACE "ATTRIBDW_DATA" LOB ( "DETAILS" ) STORE AS BASICFILE ( TABLESPACE "ATTRIBDW_DATA" ENABLE STORAGE IN ROW CHUNK 8192 RETENTION NOCACHE LOGGING STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) ) ;COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."INST_ID"IS 'Instance ID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."SID"IS 'Session ID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."SERIAL#"IS 'Session serial#'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."USER#"IS 'User ID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."SQL_ID"IS 'Executing SQL statement ID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."JOB"IS 'Identifier of job'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."ID"IS 'Current operation ID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."PARENT_ID"IS 'Parent operation ID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."SEQ_NUMBER"IS 'Cube build log sequence number'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."TIME"IS 'Time of record'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."LOG_LEVEL"IS 'Verbosity level of record'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."DEPTH"IS 'Nesting depth of record'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."OPERATION"IS 'Current operation'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."SUBOPERATION"IS 'Current suboperation'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."STATUS"IS 'Status of current operation'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."NAME"IS 'Name of record'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."VALUE"IS 'Value of record'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."DETAILS"IS 'Extra information for record'; COMMENT ON TABLE "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"IS 'Cube operations log';CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000407301C00018$$" ON "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG" ( PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ; CUBE REJECTED RECORDS CREATE TABLE "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS" ( "ID" NUMBER, "SEQ_NUMBER" NUMBER, "ERROR#" NUMBER(8,0) NOT NULL ENABLE, "ERROR_MESSAGE" VARCHAR2(2000 BYTE), "RECORD#" NUMBER(38,0), "SOURCE_ROW" ROWID, "REJECTED_RECORD" CLOB ) SEGMENT CREATION IMMEDIATE PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE ( INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT ) TABLESPACE "ATTRIBDW_DATA" LOB ( "REJECTED_RECORD" ) STORE AS BASICFILE ( TABLESPACE "ATTRIBDW_DATA" ENABLE STORAGE IN ROW CHUNK 8192 RETENTION NOCACHE LOGGING STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) ) ;COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."ID"IS 'Current operation ID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."SEQ_NUMBER"IS 'Cube build log sequence number'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."ERROR#"IS 'Error number being reported'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."ERROR_MESSAGE"IS 'Error text being reported'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."RECORD#"IS 'Rejected record number'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."SOURCE_ROW"IS 'Rejected record''s ROWID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."REJECTED_RECORD"IS 'Rejected record copy'; COMMENT ON TABLE "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"IS 'Cube rejected records log';CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000407304C00007$$" ON "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS" ( PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ;

Read the article

How to take a screenshot of a something bigger than the screen?

- by StackedCrooked

I have a created a route using Google Maps. I want to take a screenshot of this route in satellite view with maximum zoom. But since it doesn't fit my screen I can't do it. It there a way around this?

Read the article

Sip trunk without freepbx. just asterisk conf files ie /etc/asterisk/*.conf

- by user20338

every damn tutorial uses buggy freepbx. It's a pain in the ass because it doesn't set itself up right. I had to manually intervene and so did others. I want to be able to take pstn calls using my Linksys SPA3000 as a gateway. I'm told I need to add a SIP trunk then add it to a outbound route. Also how the heck is this outbound route within twinkle my sip client?

Read the article

How to make Windows 7 use the internet connection that I specify

- by user138957

I have a LAN adapter and a USB wireless internet connection. When both connected windows 7 always uses the USB. I tried changing the metric values but no luck. Let me explains the steps I took. Currently automatic metric on all adapters. LAN connected. ipconfig shows that it is connected to the correct ip/dns/gateway etc. IPv4 Route table shows Metric 24 Then connected USB. ipconfig shows USB connectivity then LAN in that order. Internet is now through USB. IPv4 Route table shows Metric 4249 for LAN and USB is 41. Gateway for USB shows "on-link". netstat -rn shows USBDEVICE on top. Changed LAN metric to 5 and now the route table shows LAN as 9 (not sure why it added 4) and USB as 41. netstat shows LAN then USB. ipconfig shows LAN then USB. But still connection is through USB. How do I know? Task manager shows utilization only through USB as well as speed is showing around 1mbps rather than LANs 10mbps. How can I get win7 use LAN while USB is connected. I am just trying to use USB as a backup just in case I lose LAN connection. Please help!! I thought i will make USB metric manually to say 10. But it says I have to reconnect for it to be effective. Currently USB still shows below LAN and still has 9 and 41 in the table. Disconnected USB. Table shows LAN metric as 24 (Not sure why it got changed from 9 and setting got reverted by to automatic) Reconnected USB. Now in the setting still shows 10 and the route table shows 11 for USB and LAN shows 4249 (settings shows 4245, 4 less)) For some reason restarting USB is resetting LAN setting when reconnected. Thanks

Read the article

Checkpoint - Routing into the tunnel

- by Fake4d

I have a simple question for my checkpoint infrastructure. Do i have to route a net which i wanna access over a configured firewall VPN Tunnel. Explanation: I have two firewalls connected over a VPN which have several nets behind them. I need to access a new net at the other firewall and put them in their encryption Domain. Now here is the question: Do i have to route it in the operating system (SecurePlat)? Thanks!

Read the article

Load balancers, multiple data centers and url based routing

- by kunkunur

There is one data center - dc1. There is a business need to setup another data center - dc2 in another geography and there might be more in the future say dc3. Within the data center dc1: There are two web servers say WS1 and WS2. These two webservers do not share anything currently. There isnt any necessity foreseen to have more webservers within each dc. dc1 also has a local load balancer which has been setup with session stickiness. So if a user say u1 lands on dc1 and if the load balancer decides to route his first request to WS1 then from there on all u1's requests will get routed to WS1. Local load balancer and webservers are invisible to the user. Local load balancer listens to the traffic on a virtual ip which is assigned to the virtual cluster of webservers ws1 and ws2. Virtual ip is the ip to which the host name is resolved to in the DNS. There are no client specific subdomains as of now instead there is a client specific url(context). ex: www.example.com/client1 and www.example.com/client2. Given above when dc2 is onboarded I want to route the traffic between dc1 and dc2 based on the client. The options that I have found so far are. Have client specific subdomains e.g. client1.example.com and client2.example.com and assign each of them with the virtual ip of the data center to which I want to route them. or Assign www.example.com and www1.example.com to first dc i.e. dc1 and assign www2.example.com to dc2. All requests will first get routed to dc1 where WS1 and WS2 will redirect the user to www1.example.com or www2.example.com based on whether the url ends with /client1 or /client2. I need help in the following If I setup a global load balancer between dc1 and dc2 do I have any alternative solutions. That is, can a global load balancer route the traffic based on the url ? Are there drawbacks to subdomain based solutions compared to www1 solution? With www1 solution I am worried that it creates a dependency on dc1 atleast for the first request and the user will see that he is getting redirected to a different url.

Read the article

How to Exclude an URL for Apache Mod_proxy?

- by Mughil

We have two Apache server as front-end and 4 tomcat server as back-end configured using mod_proxy module as load balancer. Now, we want to exclude an single tomcat url from the mod_proxy load balancer. Is there any way or rule to exclude? Proxy Balancer Setting: <Proxy balancer://backend-cluster1> BalancerMember http://10.0.0.1:8080 loadfactor=1 route=test1 retry=10 BalancerMember http://10.0.0.2:8080 loadfactor=1 route=test2 retry=10 </Proxy>

Read the article

Issues passing values to shader

- by numerical25

I am having issues passing values to my shader. My application compiles fine, but my cube object won't shade. Below is majority of my code. Most of my code for communicating with my shader is in createObject method myGame.cpp #include "MyGame.h" #include "OneColorCube.h" /* This code sets a projection and shows a turning cube. What has been added is the project, rotation and a rasterizer to change the rasterization of the cube. The issue that was going on was something with the effect file which was causing the vertices not to be rendered correctly.*/ typedef struct { ID3D10Effect* pEffect; ID3D10EffectTechnique* pTechnique; //vertex information ID3D10Buffer* pVertexBuffer; ID3D10Buffer* pIndicesBuffer; ID3D10InputLayout* pVertexLayout; UINT numVertices; UINT numIndices; }ModelObject; ModelObject modelObject; // World Matrix D3DXMATRIX WorldMatrix; // View Matrix D3DXMATRIX ViewMatrix; // Projection Matrix D3DXMATRIX ProjectionMatrix; ID3D10EffectMatrixVariable* pProjectionMatrixVariable = NULL; ID3D10EffectVectorVariable* pLightVarible = NULL; bool MyGame::InitDirect3D() { if(!DX3dApp::InitDirect3D()) { return false; } D3D10_RASTERIZER_DESC rastDesc; rastDesc.FillMode = D3D10_FILL_WIREFRAME; rastDesc.CullMode = D3D10_CULL_FRONT; rastDesc.FrontCounterClockwise = true; rastDesc.DepthBias = false; rastDesc.DepthBiasClamp = 0; rastDesc.SlopeScaledDepthBias = 0; rastDesc.DepthClipEnable = false; rastDesc.ScissorEnable = false; rastDesc.MultisampleEnable = false; rastDesc.AntialiasedLineEnable = false; ID3D10RasterizerState *g_pRasterizerState; mpD3DDevice->CreateRasterizerState(&rastDesc, &g_pRasterizerState); //mpD3DDevice->RSSetState(g_pRasterizerState); // Set up the World Matrix D3DXMatrixIdentity(&WorldMatrix); D3DXMatrixLookAtLH(&ViewMatrix, new D3DXVECTOR3(0.0f, 10.0f, -20.0f), new D3DXVECTOR3(0.0f, 0.0f, 0.0f), new D3DXVECTOR3(0.0f, 1.0f, 0.0f)); // Set up the projection matrix D3DXMatrixPerspectiveFovLH(&ProjectionMatrix, (float)D3DX_PI * 0.5f, (float)mWidth/(float)mHeight, 0.1f, 100.0f); if(!CreateObject()) { return false; } return true; } //These are actions that take place after the clearing of the buffer and before the present void MyGame::GameDraw() { static float rotationAngleY = 15.0f; static float rotationAngleX = 0.0f; static D3DXMATRIX rotationXMatrix; static D3DXMATRIX rotationYMatrix; // create the rotation matrix using the rotation angle D3DXMatrixRotationY(&rotationYMatrix, rotationAngleY); D3DXMatrixRotationX(&rotationXMatrix, rotationAngleX); //rotationAngleY += (float)D3DX_PI * 0.002f; //rotationAngleX += (float)D3DX_PI * 0.001f; WorldMatrix = rotationYMatrix * rotationXMatrix; // Set the input layout mpD3DDevice->IASetInputLayout(modelObject.pVertexLayout); // Set vertex buffer UINT stride = sizeof(VertexPos); UINT offset = 0; mpD3DDevice->IASetVertexBuffers(0, 1, &modelObject.pVertexBuffer, &stride, &offset); // Set primitive topology mpD3DDevice->IASetPrimitiveTopology(D3D10_PRIMITIVE_TOPOLOGY_TRIANGLELIST); //ViewMatrix._43 += 0.005f; // Combine and send the final matrix to the shader D3DXMATRIX finalMatrix = (WorldMatrix * ViewMatrix * ProjectionMatrix); pProjectionMatrixVariable->SetMatrix((float*)&finalMatrix); // make sure modelObject is valid // Render a model object D3D10_TECHNIQUE_DESC techniqueDescription; modelObject.pTechnique->GetDesc(&techniqueDescription); // Loop through the technique passes for(UINT p=0; p < techniqueDescription.Passes; ++p) { modelObject.pTechnique->GetPassByIndex(p)->Apply(0); // draw the cube using all 36 vertices and 12 triangles mpD3DDevice->Draw(36,0); } } //Render actually incapsulates Gamedraw, so you can call data before you actually clear the buffer or after you //present data void MyGame::Render() { DX3dApp::Render(); } bool MyGame::CreateObject() { //Create Layout D3D10_INPUT_ELEMENT_DESC layout[] = { {"POSITION",0,DXGI_FORMAT_R32G32B32_FLOAT, 0 , 0, D3D10_INPUT_PER_VERTEX_DATA, 0}, {"COLOR",0,DXGI_FORMAT_R32G32B32A32_FLOAT, 0 , 12, D3D10_INPUT_PER_VERTEX_DATA, 0}, {"NORMAL",0,DXGI_FORMAT_R32G32B32A32_FLOAT, 0 , 24, D3D10_INPUT_PER_VERTEX_DATA, 0} }; UINT numElements = (sizeof(layout)/sizeof(layout[0])); modelObject.numVertices = sizeof(vertices)/sizeof(VertexPos); for(int i = 0; i < modelObject.numVertices; i += 3) { D3DXVECTOR3 out; D3DXVECTOR3 v1 = vertices[0 + i].pos; D3DXVECTOR3 v2 = vertices[1 + i].pos; D3DXVECTOR3 v3 = vertices[2 + i].pos; D3DXVECTOR3 u = v2 - v1; D3DXVECTOR3 v = v3 - v1; D3DXVec3Cross(&out, &u, &v); D3DXVec3Normalize(&out, &out); vertices[0 + i].normal = out; vertices[1 + i].normal = out; vertices[2 + i].normal = out; } //Create buffer desc D3D10_BUFFER_DESC bufferDesc; bufferDesc.Usage = D3D10_USAGE_DEFAULT; bufferDesc.ByteWidth = sizeof(VertexPos) * modelObject.numVertices; bufferDesc.BindFlags = D3D10_BIND_VERTEX_BUFFER; bufferDesc.CPUAccessFlags = 0; bufferDesc.MiscFlags = 0; D3D10_SUBRESOURCE_DATA initData; initData.pSysMem = vertices; //Create the buffer HRESULT hr = mpD3DDevice->CreateBuffer(&bufferDesc, &initData, &modelObject.pVertexBuffer); if(FAILED(hr)) return false; /* //Create indices DWORD indices[] = { 0,1,3, 1,2,3 }; ModelObject.numIndices = sizeof(indices)/sizeof(DWORD); bufferDesc.ByteWidth = sizeof(DWORD) * ModelObject.numIndices; bufferDesc.BindFlags = D3D10_BIND_INDEX_BUFFER; initData.pSysMem = indices; hr = mpD3DDevice->CreateBuffer(&bufferDesc, &initData, &ModelObject.pIndicesBuffer); if(FAILED(hr)) return false;*/ ///////////////////////////////////////////////////////////////////////////// //Set up fx files LPCWSTR effectFilename = L"effect.fx"; modelObject.pEffect = NULL; hr = D3DX10CreateEffectFromFile(effectFilename, NULL, NULL, "fx_4_0", D3D10_SHADER_ENABLE_STRICTNESS, 0, mpD3DDevice, NULL, NULL, &modelObject.pEffect, NULL, NULL); if(FAILED(hr)) return false; pProjectionMatrixVariable = modelObject.pEffect->GetVariableByName("Projection")->AsMatrix(); pLightVarible = modelObject.pEffect->GetVariableByName("lightSource")->AsVector(); //Dont sweat the technique. Get it! LPCSTR effectTechniqueName = "Render"; D3DXVECTOR3 vLight(10.0f, 10.0f, 10.0f); pLightVarible->SetFloatVector(vLight); modelObject.pTechnique = modelObject.pEffect->GetTechniqueByName(effectTechniqueName); if(modelObject.pTechnique == NULL) return false; //Create Vertex layout D3D10_PASS_DESC passDesc; modelObject.pTechnique->GetPassByIndex(0)->GetDesc(&passDesc); hr = mpD3DDevice->CreateInputLayout(layout, numElements, passDesc.pIAInputSignature, passDesc.IAInputSignatureSize, &modelObject.pVertexLayout); if(FAILED(hr)) return false; return true; } And below is my shader effect.fx matrix Projection; float3 lightSource; float4 lightColor = {0.5, 0.5, 0.5, 0.5}; // PS_INPUT - input variables to the pixel shader // This struct is created and fill in by the // vertex shader struct PS_INPUT { float4 Pos : SV_POSITION; float4 Color : COLOR0; float4 Normal : NORMAL; }; //////////////////////////////////////////////// // Vertex Shader - Main Function /////////////////////////////////////////////// PS_INPUT VS(float4 Pos : POSITION, float4 Color : COLOR, float4 Normal : NORMAL) { PS_INPUT psInput; // Pass through both the position and the color psInput.Pos = mul( Pos, Projection ); psInput.Color = Color; psInput.Normal = Normal; return psInput; } /////////////////////////////////////////////// // Pixel Shader /////////////////////////////////////////////// float4 PS(PS_INPUT psInput) : SV_Target { float4 finalColor = 0; finalColor = saturate(dot(lightSource, psInput.Normal) * lightColor); return finalColor; } // Define the technique technique10 Render { pass P0 { SetVertexShader( CompileShader( vs_4_0, VS() ) ); SetGeometryShader( NULL ); SetPixelShader( CompileShader( ps_4_0, PS() ) ); } }

Read the article

png image store in database and retrieve in android 1.5

- by hany

hai, I am new to android. I have problem. This is my code but it will not work, the problem is in view binder. Please correct it. // this is my activity package com.android.Fruits2; import java.util.ArrayList; import java.util.HashMap; import android.app.ListActivity; import android.database.Cursor; import android.graphics.Bitmap; import android.graphics.BitmapFactory; import android.os.Bundle; import android.widget.SimpleAdapter; import android.widget.SimpleCursorAdapter; import android.widget.SimpleAdapter.ViewBinder; public class Fruits2 extends ListActivity { private DBhelper mDB; /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); // setContentView(R.layout.main); mDB = new DBhelper(this); mDB.Reset(); Bitmap img = BitmapFactory.decodeResource(getResources(), R.drawable.icon); mDB.createPersonEntry(new PersonData(img, "Harsha", 24,"mca")); String[] columns = {mDB.KEY_ID, mDB.KEY_IMG, mDB.KEY_NAME, mDB.KEY_AGE, mDB.KEY_STUDY}; String table = mDB.PERSON_TABLE; Cursor c = mDB.getHandle().query(table, columns, null, null, null, null, null); startManagingCursor(c); SimpleCursorAdapter adapter = new SimpleCursorAdapter(this, R.layout.data, c, new String[] {mDB.KEY_IMG, mDB.KEY_NAME, mDB.KEY_AGE, mDB.KEY_STUDY}, new int[] {R.id.img, R.id.name, R.id.age,R.id.study}); adapter.setViewBinder( new MyViewBinder()); setListAdapter(adapter); } } //my viewbinder package com.android.Fruits2; import android.database.Cursor; import android.graphics.BitmapFactory; import android.view.View; import android.widget.ImageView; import android.widget.SimpleCursorAdapter; public class MyViewBinder implements SimpleCursorAdapter.ViewBinder { public boolean setViewValue(View view, Cursor cursor, int columnIndex) { if( (view instanceof ImageView) ) { ImageView iv = (ImageView) view; byte[] img = cursor.getBlob(columnIndex); iv.setImageBitmap(BitmapFactory.decodeByteArray(img, 0, img.length)); return true; } return false; } } // data package com.android.Fruits2; import android.graphics.Bitmap; public class PersonData { private Bitmap bmp; private String name; private int age; private String study; public PersonData(Bitmap b, String n, int k, String v) { bmp = b; name = n; age = k; study = v; } public Bitmap getBitmap() { return bmp; } public String getName() { return name; } public int getAge() { return age; } public String getStudy() { return study; } } //dbhelper package com.android.Fruits2; import java.io.ByteArrayOutputStream; import android.content.ContentValues; import android.content.Context; import android.database.sqlite.SQLiteDatabase; import android.database.sqlite.SQLiteOpenHelper; import android.graphics.Bitmap; import android.provider.BaseColumns; public class DBhelper { public static final String KEY_ID = BaseColumns._ID; public static final String KEY_NAME = "name"; public static final String KEY_AGE = "age"; public static final String KEY_STUDY = "study"; public static final String KEY_IMG = "image"; private DatabaseHelper mDbHelper; private SQLiteDatabase mDb; private static final String DATABASE_NAME = "PersonalDB"; private static final int DATABASE_VERSION = 1; public static final String PERSON_TABLE = "Person"; private static final String CREATE_PERSON_TABLE = "create table "+PERSON_TABLE+" (" +KEY_ID+" integer primary key autoincrement, " +KEY_IMG+" blob not null, " +KEY_NAME+" text not null , " +KEY_AGE+" integer not null, " +KEY_STUDY+" text not null);"; private final Context mCtx; private boolean opened = false; private static class DatabaseHelper extends SQLiteOpenHelper { DatabaseHelper(Context context) { super(context, DATABASE_NAME, null, DATABASE_VERSION); } public void onCreate(SQLiteDatabase db) { db.execSQL(CREATE_PERSON_TABLE); } public void onUpgrade(SQLiteDatabase db, int oldVersion, int newVersion) { db.execSQL("DROP TABLE IF EXISTS "+PERSON_TABLE); onCreate(db); } } public void Reset() { openDB(); mDbHelper.onUpgrade(this.mDb, 1, 1); closeDB(); } public DBhelper(Context ctx) { mCtx = ctx; mDbHelper = new DatabaseHelper(mCtx); } private SQLiteDatabase openDB() { if(!opened) mDb = mDbHelper.getWritableDatabase(); opened = true; return mDb; } public SQLiteDatabase getHandle() { return openDB(); } private void closeDB() { if(opened) mDbHelper.close(); opened = false; } public void createPersonEntry(PersonData about) { openDB(); ByteArrayOutputStream out = new ByteArrayOutputStream(); about.getBitmap().compress(Bitmap.CompressFormat.PNG, 100, out); ContentValues cv = new ContentValues(); cv.put(KEY_IMG, out.toByteArray()); cv.put(KEY_NAME, about.getName()); cv.put(KEY_AGE, about.getAge()); cv.put(KEY_STUDY, about.getStudy()); mDb.insert(PERSON_TABLE, null, cv); closeDB(); } } //data.xml <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="wrap_content"> <ImageView android:id = "@+id/img" android:layout_width = "wrap_content" android:layout_height = "wrap_content" > </ImageView> <TextView android:id = "@+id/name" android:layout_width = "wrap_content" android:layout_height = "wrap_content" android:textSize="15dp" android:textColor="#ff0000" > </TextView> <TextView android:id = "@+id/age" android:layout_width = "wrap_content" android:layout_height = "wrap_content" android:textSize="15dp" android:textColor="#ff0000" /> <TextView android:id = "@+id/study" android:layout_width = "wrap_content" android:layout_height = "wrap_content" android:textSize="15dp" android:textColor="#ff0000" /> </LinearLayout> When I run this in android 1.6 and 2.1, it works. But when I run in android 1.5, not work. My application is android 1.5. Please correct and send code to me. Thank you.

Read the article

I get java.lang.NullPointerException when trying to get the contents of the database in Android

- by ncountr

I am using 8 EditText boxes from the NewCard.xml from which i am taking the values and when the save button is pressed i am storing the values into a database, in the same process of saving i am trying to get the values and present them into 8 different TextView boxes on the main.xml file and when i press the button i get an FC from the emulator and the resulting error is java.lang.NullPointerException. If Some 1 could help me that would be great, since i have never used databases and this is my first application for android and this is the only thing keepeng me to complete the whole thing and publish it on the market like a free app. Here's the full code from NewCard.java. public class NewCard extends Activity { private static String[] FROM = { _ID, FIRST_NAME, LAST_NAME, POSITION, POSTAL_ADDRESS, PHONE_NUMBER, FAX_NUMBER, MAIL_ADDRESS, WEB_ADDRESS}; private static String ORDER_BY = FIRST_NAME; private CardsData cards; EditText First_Name; EditText Last_Name; EditText Position; EditText Postal_Address; EditText Phone_Number; EditText Fax_Number; EditText Mail_Address; EditText Web_Address; Button New_Cancel; Button New_Save; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.newcard); cards = new CardsData(this); //Define the Cancel Button in NewCard Activity New_Cancel = (Button) this.findViewById(R.id.new_cancel_button); //Define the Cancel Button Activity/s New_Cancel.setOnClickListener ( new OnClickListener() { public void onClick(View arg0) { NewCancelDialog(); } } );//End of the Cancel Button Activity/s //Define the Save Button in NewCard Activity New_Save = (Button) this.findViewById(R.id.new_save_button); //Define the EditText Fields to Get Their Values Into the Database First_Name = (EditText) this.findViewById(R.id.new_first_name); Last_Name = (EditText) this.findViewById(R.id.new_last_name); Position = (EditText) this.findViewById(R.id.new_position); Postal_Address = (EditText) this.findViewById(R.id.new_postal_address); Phone_Number = (EditText) this.findViewById(R.id.new_phone_number); Fax_Number = (EditText) this.findViewById(R.id.new_fax_number); Mail_Address = (EditText) this.findViewById(R.id.new_mail_address); Web_Address = (EditText) this.findViewById(R.id.new_web_address); //Define the Save Button Activity/s New_Save.setOnClickListener ( new OnClickListener() { public void onClick(View arg0) { //Add Code For Saving The Attributes Into The Database try { addCard(First_Name.getText().toString(), Last_Name.getText().toString(), Position.getText().toString(), Postal_Address.getText().toString(), Integer.parseInt(Phone_Number.getText().toString()), Integer.parseInt(Fax_Number.getText().toString()), Mail_Address.getText().toString(), Web_Address.getText().toString()); Cursor cursor = getCard(); showCard(cursor); } finally { cards.close(); NewCard.this.finish(); } } } );//End of the Save Button Activity/s } //======================================================================================// //DATABASE FUNCTIONS private void addCard(String firstname, String lastname, String position, String postaladdress, int phonenumber, int faxnumber, String mailaddress, String webaddress) { // Insert a new record into the Events data source. // You would do something similar for delete and update. SQLiteDatabase db = cards.getWritableDatabase(); ContentValues values = new ContentValues(); values.put(FIRST_NAME, firstname); values.put(LAST_NAME, lastname); values.put(POSITION, position); values.put(POSTAL_ADDRESS, postaladdress); values.put(PHONE_NUMBER, phonenumber); values.put(FAX_NUMBER, phonenumber); values.put(MAIL_ADDRESS, mailaddress); values.put(WEB_ADDRESS, webaddress); db.insertOrThrow(TABLE_NAME, null, values); } private Cursor getCard() { // Perform a managed query. The Activity will handle closing // and re-querying the cursor when needed. SQLiteDatabase db = cards.getReadableDatabase(); Cursor cursor = db.query(TABLE_NAME, FROM, null, null, null, null, ORDER_BY); startManagingCursor(cursor); return cursor; } private void showCard(Cursor cursor) { // Stuff them all into a big string long id = 0; String firstname = null; String lastname = null; String position = null; String postaladdress = null; long phonenumber = 0; long faxnumber = 0; String mailaddress = null; String webaddress = null; while (cursor.moveToNext()) { // Could use getColumnIndexOrThrow() to get indexes id = cursor.getLong(0); firstname = cursor.getString(1); lastname = cursor.getString(2); position = cursor.getString(3); postaladdress = cursor.getString(4); phonenumber = cursor.getLong(5); faxnumber = cursor.getLong(6); mailaddress = cursor.getString(7); webaddress = cursor.getString(8); } // Display on the screen add for each textView TextView ids = (TextView) findViewById(R.id.id); TextView fn = (TextView) findViewById(R.id.firstname); TextView ln = (TextView) findViewById(R.id.lastname); TextView pos = (TextView) findViewById(R.id.position); TextView pa = (TextView) findViewById(R.id.postaladdress); TextView pn = (TextView) findViewById(R.id.phonenumber); TextView fxn = (TextView) findViewById(R.id.faxnumber); TextView ma = (TextView) findViewById(R.id.mailaddress); TextView wa = (TextView) findViewById(R.id.webaddress); ids.setText(String.valueOf(id)); fn.setText(String.valueOf(firstname)); ln.setText(String.valueOf(lastname)); pos.setText(String.valueOf(position)); pa.setText(String.valueOf(postaladdress)); pn.setText(String.valueOf(phonenumber)); fxn.setText(String.valueOf(faxnumber)); ma.setText(String.valueOf(mailaddress)); wa.setText(String.valueOf(webaddress)); } //======================================================================================// //Define the Dialog that alerts you when you press the Cancel button private void NewCancelDialog() { new AlertDialog.Builder(this) .setMessage("Are you sure you want to cancel?") .setTitle("Cancel") .setCancelable(false) .setPositiveButton("Yes", new DialogInterface.OnClickListener() { public void onClick(DialogInterface dialog, int id) { NewCard.this.finish(); } }) .setNegativeButton("No", new DialogInterface.OnClickListener() { public void onClick(DialogInterface dialog, int id) { dialog.cancel(); } }) .show(); }//End of the Cancel Dialog }

Read the article

UITableview has problem reloading

- by seelani

Hi guys, I've kinda finished my application for a school project but have run into a major "bug". It's a account management application. I'm unable to insert a picture here so here's a link: http://i232.photobucket.com/albums/ee112/seelani/Screenshot2010-12-22atPM075512.png Here's the problem when i click on the plus sign, i push a nav controller to load another view to handle the adding and deleting of categories. When i add and return back to the view above, it doesn't update. It only updates after i hit the button on the right which is another view used to change some settings, and return back to the page. I did some research on viewWillAppear and such but I'm still confused to why it doesn't work properly. This problem is also affecting my program when i delete a category, and return back to this view it crashes cos the view has not reloaded successfully. I will get this error when deleting and returning to the view. "* Terminating app due to uncaught exception 'NSRangeException', reason: '* -[NSMutableArray objectAtIndex:]: index 4 beyond bounds [0 .. 3]'". [EDIT] Table View Code: @class LoginViewController; @implementation CategoryTableViewController @synthesize categoryTableViewController; @synthesize categoryArray; @synthesize accountsTableViewController; @synthesize editAccountTable; @synthesize window; CategoryMgmtTableController *categoryMgmtTableController; ChangePasswordView *changePasswordView; - (void) save_Clicked:(id)sender { /* UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"Category Management" message:@"Load category management table view" delegate:self cancelButtonTitle: @"OK" otherButtonTitles:nil]; [alert show]; [alert release]; */ KeyCryptAppAppDelegate *appDelegate = (KeyCryptAppAppDelegate *)[[UIApplication sharedApplication] delegate]; categoryMgmtTableController = [[CategoryMgmtTableController alloc]initWithNibName:@"CategoryMgmtTable" bundle:nil]; [appDelegate.categoryNavController pushViewController:categoryMgmtTableController animated:YES]; } - (void) change_Clicked:(id)sender { UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"Change Password" message:@"Change password View" delegate:self cancelButtonTitle: @"OK" otherButtonTitles:nil]; [alert show]; [alert release]; KeyCryptAppAppDelegate *appDelegate = (KeyCryptAppAppDelegate *)[[UIApplication sharedApplication] delegate]; changePasswordView = [[ChangePasswordView alloc]initWithNibName:@"ChangePasswordView" bundle:nil]; [appDelegate.categoryNavController pushViewController:changePasswordView animated:YES]; /* KeyCryptAppAppDelegate *appDelegate = (KeyCryptAppAppDelegate *)[[UIApplication sharedApplication] delegate]; categoryMgmtTableController = [[CategoryMgmtTableController alloc]initWithNibName:@"CategoryMgmtTable" bundle:nil]; [appDelegate.categoryNavController pushViewController:categoryMgmtTableController animated:YES]; */ } #pragma mark - #pragma mark Initialization /* - (id)initWithStyle:(UITableViewStyle)style { // Override initWithStyle: if you create the controller programmatically and want to perform customization that is not appropriate for viewDidLoad. if ((self = [super initWithStyle:style])) { } return self; } */ -(void) initializeCategoryArray { sqlite3 *db= [KeyCryptAppAppDelegate getNewDBConnection]; KeyCryptAppAppDelegate *appDelegate = (KeyCryptAppAppDelegate *)[[UIApplication sharedApplication] delegate]; const char *sql = [[NSString stringWithFormat:(@"Select Category from Categories;")]cString]; const char *cmd = [[NSString stringWithFormat:@"pragma key = '%@' ", appDelegate.pragmaKey]cString]; sqlite3_stmt *compiledStatement; sqlite3_exec(db, cmd, NULL, NULL, NULL); if (sqlite3_prepare_v2(db, sql, -1, &compiledStatement, NULL)==SQLITE_OK) { while(sqlite3_step(compiledStatement) == SQLITE_ROW) [categoryArray addObject:[NSString stringWithUTF8String:(char*) sqlite3_column_text(compiledStatement, 0)]]; } else { NSAssert1(0,@"Error preparing statement", sqlite3_errmsg(db)); } sqlite3_finalize(compiledStatement); } #pragma mark - #pragma mark View lifecycle - (void)viewDidLoad { // Uncomment the following line to display an Edit button in the navigation bar for this view controller. // self.navigationItem.rightBarButtonItem = self.editButtonItem; [super viewDidLoad]; } - (void)viewWillAppear:(BOOL)animated { self.title = NSLocalizedString(@"Categories",@"Types of Categories"); categoryArray = [[NSMutableArray alloc]init]; [self initializeCategoryArray]; self.navigationItem.rightBarButtonItem = [[[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemAdd target:self action:@selector(save_Clicked:)] autorelease]; self.navigationItem.leftBarButtonItem = [[[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemAction target:self action:@selector(change_Clicked:)] autorelease]; [super viewWillAppear:animated]; } - (void)viewDidAppear:(BOOL)animated { NSLog (@"view did appear"); [super viewDidAppear:animated]; } - (void)viewWillDisappear:(BOOL)animated { NSLog (@"view will disappear"); [super viewWillDisappear:animated]; } - (void)viewDidDisappear:(BOOL)animated { [categoryTableView reloadData]; NSLog (@"view did disappear"); [super viewDidDisappear:animated]; } /* // Override to allow orientations other than the default portrait orientation. - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { // Return YES for supported orientations return (interfaceOrientation == UIInterfaceOrientationPortrait); } */ #pragma mark - #pragma mark Table view data source - (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView { // Return the number of sections. return 1; } - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { // Return the number of rows in the section. return [self.categoryArray count]; } // Customize the appearance of table view cells. - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellIdentifier = @"Cell"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier] autorelease]; } // Configure the cell... NSUInteger row = [indexPath row]; cell.text = [categoryArray objectAtIndex:row]; cell.accessoryType = UITableViewCellAccessoryDisclosureIndicator; return cell; } /* // Override to support conditional editing of the table view. - (BOOL)tableView:(UITableView *)tableView canEditRowAtIndexPath:(NSIndexPath *)indexPath { // Return NO if you do not want the specified item to be editable. return YES; } */ /* // Override to support editing the table view. - (void)tableView:(UITableView *)tableView commitEditingStyle:(UITableViewCellEditingStyle)editingStyle forRowAtIndexPath:(NSIndexPath *)indexPath { if (editingStyle == UITableViewCellEditingStyleDelete) { // Delete the row from the data source [tableView deleteRowsAtIndexPaths:[NSArray arrayWithObject:indexPath] withRowAnimation:YES]; } else if (editingStyle == UITableViewCellEditingStyleInsert) { // Create a new instance of the appropriate class, insert it into the array, and add a new row to the table view } } */ /* // Override to support rearranging the table view. - (void)tableView:(UITableView *)tableView moveRowAtIndexPath:(NSIndexPath *)fromIndexPath toIndexPath:(NSIndexPath *)toIndexPath { } */ /* // Override to support conditional rearranging of the table view. - (BOOL)tableView:(UITableView *)tableView canMoveRowAtIndexPath:(NSIndexPath *)indexPath { // Return NO if you do not want the item to be re-orderable. return YES; } */ #pragma mark - #pragma mark Table view delegate - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { NSString *selectedCategory = [categoryArray objectAtIndex:[indexPath row]]; NSLog (@"AccountsTableView.xib is called."); if ([categoryArray containsObject: selectedCategory]) { if (self.accountsTableViewController == nil) { AccountsTableViewController *aAccountsView = [[AccountsTableViewController alloc]initWithNibName:@"AccountsTableView"bundle:nil]; self.accountsTableViewController =aAccountsView; [aAccountsView release]; } NSInteger row =[indexPath row]; accountsTableViewController.title = [NSString stringWithFormat:@"%@", [categoryArray objectAtIndex:row]]; // This portion pushes the categoryNavController. KeyCryptAppAppDelegate *delegate = [[UIApplication sharedApplication] delegate]; [self.accountsTableViewController initWithTextSelected:selectedCategory]; KeyCryptAppAppDelegate *appDelegate = (KeyCryptAppAppDelegate *)[[UIApplication sharedApplication] delegate]; appDelegate.pickedCategory = selectedCategory; [delegate.categoryNavController pushViewController:accountsTableViewController animated:YES]; } } #pragma mark - #pragma mark Memory management - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Relinquish ownership any cached data, images, etc that aren't in use. } - (void)viewDidUnload { // Relinquish ownership of anything that can be recreated in viewDidLoad or on demand. // For example: self.myOutlet = nil; } - (void)dealloc { [accountsTableViewController release]; [super dealloc]; } @end And the code that i used to delete rows(this is in a totally different tableview): - (void)tableView:(UITableView *)tableView commitEditingStyle:(UITableViewCellEditingStyle)editingStyle forRowAtIndexPath:(NSIndexPath *)indexPath { if (editingStyle == UITableViewCellEditingStyleDelete) { // Delete the row from the data source NSString *selectedCategory = [categoryArray objectAtIndex:indexPath.row]; [categoryArray removeObjectAtIndex:indexPath.row]; [tableView deleteRowsAtIndexPaths:[NSArray arrayWithObject:indexPath] withRowAnimation:YES]; [deleteCategoryTable reloadData]; //NSString *selectedCategory = [categoryArray objectAtIndex:indexPath.row]; sqlite3 *db= [KeyCryptAppAppDelegate getNewDBConnection]; KeyCryptAppAppDelegate *appDelegate = (KeyCryptAppAppDelegate *)[[UIApplication sharedApplication] delegate]; const char *sql = [[NSString stringWithFormat:@"Delete from Categories where Category = '%@';", selectedCategory]cString]; const char *cmd = [[NSString stringWithFormat:@"pragma key = '%@' ", appDelegate.pragmaKey]cString]; sqlite3_stmt *compiledStatement; sqlite3_exec(db, cmd, NULL, NULL, NULL); if (sqlite3_prepare_v2(db, sql, -1, &compiledStatement, NULL)==SQLITE_OK) { sqlite3_exec(db,sql,NULL,NULL,NULL); } else { NSAssert1(0,@"Error preparing statement", sqlite3_errmsg(db)); } sqlite3_finalize(compiledStatement); } else if (editingStyle == UITableViewCellEditingStyleInsert) { // Create a new instance of the appropriate class, insert it into the array, and add a new row to the table view } }

Read the article

C sockets, chat server and client, problem echoing back.

- by wretrOvian

Hi This is my chat server : #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/types.h> #include <sys/socket.h> #include <netdb.h> #include <string.h> #define LISTEN_Q 20 #define MSG_SIZE 1024 struct userlist { int sockfd; struct sockaddr addr; struct userlist *next; }; int main(int argc, char *argv[]) { // declare. int listFD, newFD, fdmax, i, j, bytesrecvd; char msg[MSG_SIZE], ipv4[INET_ADDRSTRLEN]; struct addrinfo hints, *srvrAI; struct sockaddr_storage newAddr; struct userlist *users, *uptr, *utemp; socklen_t newAddrLen; fd_set master_set, read_set; // clear sets FD_ZERO(&master_set); FD_ZERO(&read_set); // create a user list users = (struct userlist *)malloc(sizeof(struct userlist)); users->sockfd = -1; //users->addr = NULL; users->next = NULL; // clear hints memset(&hints, 0, sizeof hints); // prep hints hints.ai_family = AF_INET; hints.ai_socktype = SOCK_STREAM; hints.ai_flags = AI_PASSIVE; // get srver info if(getaddrinfo("localhost", argv[1], &hints, &srvrAI) != 0) { perror("* ERROR | getaddrinfo()\n"); exit(1); } // get a socket if((listFD = socket(srvrAI->ai_family, srvrAI->ai_socktype, srvrAI->ai_protocol)) == -1) { perror("* ERROR | socket()\n"); exit(1); } // bind socket bind(listFD, srvrAI->ai_addr, srvrAI->ai_addrlen); // listen on socket if(listen(listFD, LISTEN_Q) == -1) { perror("* ERROR | listen()\n"); exit(1); } // add listfd to master_set FD_SET(listFD, &master_set); // initialize fdmax fdmax = listFD; while(1) { // equate read_set = master_set; // run select if(select(fdmax+1, &read_set, NULL, NULL, NULL) == -1) { perror("* ERROR | select()\n"); exit(1); } // query all sockets for(i = 0; i <= fdmax; i++) { if(FD_ISSET(i, &read_set)) { // found active sockfd if(i == listFD) { // new connection // accept newAddrLen = sizeof newAddr; if((newFD = accept(listFD, (struct sockaddr *)&newAddr, &newAddrLen)) == -1) { perror("* ERROR | select()\n"); exit(1); } // resolve ip if(inet_ntop(AF_INET, &(((struct sockaddr_in *)&newAddr)->sin_addr), ipv4, INET_ADDRSTRLEN) == -1) { perror("* ERROR | inet_ntop()"); exit(1); } fprintf(stdout, "* Client Connected | %s\n", ipv4); // add to master list FD_SET(newFD, &master_set); // create new userlist component utemp = (struct userlist*)malloc(sizeof(struct userlist)); utemp->next = NULL; utemp->sockfd = newFD; utemp->addr = *((struct sockaddr *)&newAddr); // iterate to last node for(uptr = users; uptr->next != NULL; uptr = uptr->next) { } // add uptr->next = utemp; // update fdmax if(newFD > fdmax) fdmax = newFD; } else { // existing sockfd transmitting data // read if((bytesrecvd = recv(i, msg, MSG_SIZE, 0)) == -1) { perror("* ERROR | recv()\n"); exit(1); } msg[bytesrecvd] = '\0'; // find out who sent? for(uptr = users; uptr->next != NULL; uptr = uptr->next) { if(i == uptr->sockfd) break; } // resolve ip if(inet_ntop(AF_INET, &(((struct sockaddr_in *)&(uptr->addr))->sin_addr), ipv4, INET_ADDRSTRLEN) == -1) { perror("* ERROR | inet_ntop()"); exit(1); } // print fprintf(stdout, "%s\n", msg); // send to all for(j = 0; j <= fdmax; j++) { if(FD_ISSET(j, &master_set)) { if(send(j, msg, strlen(msg), 0) == -1) perror("* ERROR | send()"); } } } // handle read from client } // end select result handle } // end looping fds } // end while return 0; } This is my client: #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/types.h> #include <sys/socket.h> #include <netdb.h> #include <string.h> #define MSG_SIZE 1024 int main(int argc, char *argv[]) { // declare. int newFD, bytesrecvd, fdmax; char msg[MSG_SIZE]; fd_set master_set, read_set; struct addrinfo hints, *srvrAI; // clear sets FD_ZERO(&master_set); FD_ZERO(&read_set); // clear hints memset(&hints, 0, sizeof hints); // prep hints hints.ai_family = AF_INET; hints.ai_socktype = SOCK_STREAM; hints.ai_flags = AI_PASSIVE; // get srver info if(getaddrinfo(argv[1], argv[2], &hints, &srvrAI) != 0) { perror("* ERROR | getaddrinfo()\n"); exit(1); } // get a socket if((newFD = socket(srvrAI->ai_family, srvrAI->ai_socktype, srvrAI->ai_protocol)) == -1) { perror("* ERROR | socket()\n"); exit(1); } // connect to server if(connect(newFD, srvrAI->ai_addr, srvrAI->ai_addrlen) == -1) { perror("* ERROR | connect()\n"); exit(1); } // add to master, and add keyboard FD_SET(newFD, &master_set); FD_SET(STDIN_FILENO, &master_set); // initialize fdmax if(newFD > STDIN_FILENO) fdmax = newFD; else fdmax = STDIN_FILENO; while(1) { // equate read_set = master_set; if(select(fdmax+1, &read_set, NULL, NULL, NULL) == -1) { perror("* ERROR | select()"); exit(1); } // check server if(FD_ISSET(newFD, &read_set)) { // read data if((bytesrecvd = recv(newFD, msg, MSG_SIZE, 0)) < 0 ) { perror("* ERROR | recv()"); exit(1); } msg[bytesrecvd] = '\0'; // print fprintf(stdout, "%s\n", msg); } // check keyboard if(FD_ISSET(STDIN_FILENO, &read_set)) { // read data from stdin if((bytesrecvd = read(STDIN_FILENO, msg, MSG_SIZE)) < 0) { perror("* ERROR | read()"); exit(1); } msg[bytesrecvd] = '\0'; // send if((send(newFD, msg, bytesrecvd, 0)) == -1) { perror("* ERROR | send()"); exit(1); } } } return 0; } The problem is with the part where the server recv()s data from an FD, then tries echoing back to all [send() ]; it just dies, w/o errors, and my client is left looping :(

Read the article

JavaMail not sending Subject or From under jetty:run-war

- by Jason Thrasher

Has anyone seen JavaMail not sending proper MimeMessages to an SMTP server, depending on how the JVM in started? At the end of the day, I can't send JavaMail SMTP messages with Subject: or From: fields, and it appears other headers are missing, only when running the app as a war. The web project is built with Maven and I'm testing sending JavaMail using a browser and a simple mail.jsp to debug and see different behavior when launching the app with: 1) mvn jetty:run (mail sends fine, with proper Subject and From fields) 2) mvn jetty:run-war (mail sends fine, but missing Subject, From, and other fields) I've meticulously run diff on the (verbose) Maven debug output (-X), and there are zero differences in the runtime dependencies between the two. I've also compared System properties, and they are identical. Something else is happening the jetty:run-war case that changes the way JavaMail behaves. What other stones need turning? Curiously, I've tried a debugger in both situations and found that the javax.mail.internet.MimeMessage instance is getting created differently. The webapp is using Spring to send email picked off of an Apache ActiveMQ queue. When running the app as mvn jetty:run the MimeMessage.contentStream variable is used for message content. When running as mvn jetty:run-war, the MimeMessage.content variable is used for the message contents, and the content = ASCIIUtility.getBytes(is); call removes all of the header data from the parsed content. Since this seemed very odd, and debugging Spring/ActiveMQ is a deep dive, I created a simplified test without any of that infrastructure: just a JSP using mail-1.4.2.jar, yet the same headers are missing. Also of note, these headers are missing when running the WAR file under Tomcat 5.5.27. Tomcat behaves just like Jetty when running the WAR, with the same missing headers. With JavaMail debugging turned on, I clearly see different output. GOOD CASE: In the jetty:run (non-WAR) the log output is: DEBUG: JavaMail version 1.4.2 DEBUG: successfully loaded resource: /META-INF/javamail.default.providers DEBUG: Tables of loaded providers DEBUG: Providers Listed By Class Name: {com.sun.mail.smtp.SMTPSSLTransport=javax.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc], com.sun.mail.smtp.SMTPTransport=javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc], com.sun.mail.imap.IMAPSSLStore=javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Sun Microsystems, Inc], com.sun.mail.pop3.POP3SSLStore=javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun Microsystems, Inc], com.sun.mail.imap.IMAPStore=javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc], com.sun.mail.pop3.POP3Store=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Sun Microsystems, Inc]} DEBUG: Providers Listed By Protocol: {imaps=javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Sun Microsystems, Inc], imap=javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc], smtps=javax.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc], pop3=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Sun Microsystems, Inc], pop3s=javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun Microsystems, Inc], smtp=javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]} DEBUG: successfully loaded resource: /META-INF/javamail.default.address.map DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc] DEBUG SMTP: useEhlo true, useAuth true DEBUG SMTP: trying to connect to host "mail.authsmtp.com", port 465, isSSL false 220 mail.authsmtp.com ESMTP Sendmail 8.14.2/8.14.2/Kp; Thu, 18 Jun 2009 01:35:24 +0100 (BST) DEBUG SMTP: connected to host "mail.authsmtp.com", port: 465 EHLO jmac.local 250-mail.authsmtp.com Hello sul-pubs-3a.Stanford.EDU [171.66.201.2], pleased to meet you 250-ENHANCEDSTATUSCODES 250-PIPELINING 250-8BITMIME 250-SIZE 52428800 250-AUTH CRAM-MD5 DIGEST-MD5 LOGIN PLAIN 250-DELIVERBY 250 HELP DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg "" DEBUG SMTP: Found extension "PIPELINING", arg "" DEBUG SMTP: Found extension "8BITMIME", arg "" DEBUG SMTP: Found extension "SIZE", arg "52428800" DEBUG SMTP: Found extension "AUTH", arg "CRAM-MD5 DIGEST-MD5 LOGIN PLAIN" DEBUG SMTP: Found extension "DELIVERBY", arg "" DEBUG SMTP: Found extension "HELP", arg "" DEBUG SMTP: Attempt to authenticate DEBUG SMTP: check mechanisms: LOGIN PLAIN DIGEST-MD5 AUTH LOGIN 334 VXNlcm5hjbt7 YWM0MDkwhi== 334 UGFzc3dvjbt7 YXV0aHNtdHAydog3 235 2.0.0 OK Authenticated DEBUG SMTP: use8bit false MAIL FROM:<[email protected]> 250 2.1.0 <[email protected]>... Sender ok RCPT TO:<[email protected]> 250 2.1.5 <[email protected]>... Recipient ok DEBUG SMTP: Verified Addresses DEBUG SMTP: Jason Thrasher <[email protected]> DATA 354 Enter mail, end with "." on a line by itself From: Webmaster <[email protected]> To: Jason Thrasher <[email protected]> Message-ID: <[email protected]> Subject: non-Spring: Hello World MIME-Version: 1.0 Content-Type: text/plain;charset=UTF-8 Content-Transfer-Encoding: 7bit Hello World: message body here . 250 2.0.0 n5I0ZOkD085654 Message accepted for delivery QUIT 221 2.0.0 mail.authsmtp.com closing connection BAD CASE: The log output when running as a WAR, with missing headers, is quite different: Loading javamail.default.providers from jar:file:/Users/jason/.m2/repository/javax/mail/mail/1.4.2/mail-1.4.2.jar!/META-INF/javamail.default.providers DEBUG: loading new provider protocol=imap, className=com.sun.mail.imap.IMAPStore, vendor=Sun Microsystems, Inc, version=null DEBUG: loading new provider protocol=imaps, className=com.sun.mail.imap.IMAPSSLStore, vendor=Sun Microsystems, Inc, version=null DEBUG: loading new provider protocol=smtp, className=com.sun.mail.smtp.SMTPTransport, vendor=Sun Microsystems, Inc, version=null DEBUG: loading new provider protocol=smtps, className=com.sun.mail.smtp.SMTPSSLTransport, vendor=Sun Microsystems, Inc, version=null DEBUG: loading new provider protocol=pop3, className=com.sun.mail.pop3.POP3Store, vendor=Sun Microsystems, Inc, version=null DEBUG: loading new provider protocol=pop3s, className=com.sun.mail.pop3.POP3SSLStore, vendor=Sun Microsystems, Inc, version=null Loading javamail.default.providers from jar:file:/Users/jason/Documents/dev/subscribeatron/software/trunk/web/struts/target/work/webapp/WEB-INF/lib/mail-1.4.2.jar!/META-INF/javamail.default.providers DEBUG: loading new provider protocol=imap, className=com.sun.mail.imap.IMAPStore, vendor=Sun Microsystems, Inc, version=null DEBUG: loading new provider protocol=imaps, className=com.sun.mail.imap.IMAPSSLStore, vendor=Sun Microsystems, Inc, version=null DEBUG: loading new provider protocol=smtp, className=com.sun.mail.smtp.SMTPTransport, vendor=Sun Microsystems, Inc, version=null DEBUG: loading new provider protocol=smtps, className=com.sun.mail.smtp.SMTPSSLTransport, vendor=Sun Microsystems, Inc, version=null DEBUG: loading new provider protocol=pop3, className=com.sun.mail.pop3.POP3Store, vendor=Sun Microsystems, Inc, version=null DEBUG: loading new provider protocol=pop3s, className=com.sun.mail.pop3.POP3SSLStore, vendor=Sun Microsystems, Inc, version=null DEBUG: getProvider() returning provider protocol=smtp; type=javax.mail.Provider$Type@98203f; class=com.sun.mail.smtp.SMTPTransport; vendor=Sun Microsystems, Inc DEBUG SMTP: useEhlo true, useAuth false DEBUG SMTP: trying to connect to host "mail.authsmtp.com", port 465, isSSL false 220 mail.authsmtp.com ESMTP Sendmail 8.14.2/8.14.2/Kp; Thu, 18 Jun 2009 01:51:46 +0100 (BST) DEBUG SMTP: connected to host "mail.authsmtp.com", port: 465 EHLO jmac.local 250-mail.authsmtp.com Hello sul-pubs-3a.Stanford.EDU [171.66.201.2], pleased to meet you 250-ENHANCEDSTATUSCODES 250-PIPELINING 250-8BITMIME 250-SIZE 52428800 250-AUTH CRAM-MD5 DIGEST-MD5 LOGIN PLAIN 250-DELIVERBY 250 HELP DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg "" DEBUG SMTP: Found extension "PIPELINING", arg "" DEBUG SMTP: Found extension "8BITMIME", arg "" DEBUG SMTP: Found extension "SIZE", arg "52428800" DEBUG SMTP: Found extension "AUTH", arg "CRAM-MD5 DIGEST-MD5 LOGIN PLAIN" DEBUG SMTP: Found extension "DELIVERBY", arg "" DEBUG SMTP: Found extension "HELP", arg "" DEBUG SMTP: Attempt to authenticate DEBUG SMTP: check mechanisms: LOGIN PLAIN DIGEST-MD5 AUTH LOGIN 334 VXNlcm5hjbt7 YWM0MDkwhi== 334 UGFzc3dvjbt7 YXV0aHNtdHAydog3 235 2.0.0 OK Authenticated DEBUG SMTP: use8bit false MAIL FROM:<[email protected]> 250 2.1.0 <[email protected]>... Sender ok RCPT TO:<[email protected]> 250 2.1.5 <[email protected]>... Recipient ok DEBUG SMTP: Verified Addresses DEBUG SMTP: Jason Thrasher <[email protected]> DATA 354 Enter mail, end with "." on a line by itself Hello World: message body here . 250 2.0.0 n5I0pkSc090137 Message accepted for delivery QUIT 221 2.0.0 mail.authsmtp.com closing connection Here's the actual mail.jsp that I'm testing war/non-war with. <%@page import="java.util.*"%> <%@page import="javax.mail.internet.*"%> <%@page import="javax.mail.*"%> <% InternetAddress from = new InternetAddress("[email protected]", "Webmaster"); InternetAddress to = new InternetAddress("[email protected]", "Jason Thrasher"); String subject = "non-Spring: Hello World"; String content = "Hello World: message body here"; final Properties props = new Properties(); props.setProperty("mail.transport.protocol", "smtp"); props.setProperty("mail.host", "mail.authsmtp.com"); props.setProperty("mail.port", "465"); props.setProperty("mail.username", "myusername"); props.setProperty("mail.password", "secret"); props.setProperty("mail.debug", "true"); props.setProperty("mail.smtp.auth", "true"); props.setProperty("mail.smtp.socketFactory.class", "javax.net.ssl.SSLSocketFactory"); props.setProperty("mail.smtp.socketFactory.fallback", "false"); Session mailSession = Session.getDefaultInstance(props); Message message = new MimeMessage(mailSession); message.setFrom(from); message.setRecipient(Message.RecipientType.TO, to); message.setSubject(subject); message.setContent(content, "text/plain;charset=UTF-8"); Transport trans = mailSession.getTransport(); trans.connect(props.getProperty("mail.host"), Integer .parseInt(props.getProperty("mail.port")), props .getProperty("mail.username"), props .getProperty("mail.password")); trans.sendMessage(message, message .getRecipients(Message.RecipientType.TO)); trans.close(); %> email was sent SOLUTION: Yes, the problem was transitive dependencies of Apache CXF 2. I had to exclude geronimo-javamail_1.4_spec from the build, and just rely on javax's mail-1.4.jar. <dependency> <groupId>org.apache.cxf</groupId> <artifactId>cxf-rt-frontend-jaxws</artifactId> <version>2.2.6</version> <exclusions> <exclusion> <groupId>org.apache.geronimo.specs</groupId> <artifactId>geronimo-javamail_1.4_spec</artifactId> </exclusion> </exclusions> </dependency> Thanks for all of the answers.

Search Results

Search found 21268 results on 851 pages for 'null route'.

Page 133/851 | < Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140 | Next Page >

- by The_cobra666

- by Mickel

- by colithium

- by pinaldave

- by Kyle Brandt

- by chappar

- by Mark S. Rasmussen

- by Azzam

- by onefloridacoder

- by freefallr

- by syuusuke

- by WalterJ89

- by Mohan Ramanuja

- by StackedCrooked

- by user20338

- by user138957

- by Fake4d

- by kunkunur

- by Mughil

- by numerical25

- by hany

- by ncountr

- by seelani

- by wretrOvian

- by Jason Thrasher

< Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140 | Next Page >