Search Results

Search found 10798 results on 432 pages for 'port scanning'.

Page 133/432 | < Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >

• My nameserver isn't registered?

  - by jflory7

  My problem is that I am trying to set my domain's nameservers to the nameservers of my dedicated server. My domain is hosted by Namecheap, and everytime I try to input the two nameservers for my private server, one of them is rejected for being unregistered. My dedicated server's control panel is managed through Parallels Plesk 11.5, and the nameservers provided to me are one from the actual provider, OVH (sdns1.ovh.ca), and the other is an actual unique nameserver that points directly to my specific dedicated server. Previously, for another domain I own, I was successfully able to get Namecheap to take the nameserver without an error, so I know this is possible. I know that it works for one of my other domains. After being redirected by Namecheap to contact the server provider, I called OVH and they said it was something I would have to do myself. One interesting detail the OVH representative mentioned was that he saw that my port 53 was closed, which is the port that handles DNS. The only problem is that I have no idea or knowledge as how to open this port back up. So, my final question is how can I get this nameserver working in Namecheap to point to my dedicated server? If you need any more details, feel free to ask for clarification.

  Read the article

• Apache: getting proxy, rewrite, and SSL to play nice

  - by Rich M

  Hi, I'm having loads of trouble trying to integrate proxy, rewrite, and SSL altogether in Apache 2. A brief history, my application runs on port 8080 and before adding SSL, I used proxy to strip the 8080 from the url's to and from the server. So instead of www.example.com:8080/myapp, the client app accessed everything via www.example.com/myapp Here was the conf the accomplished this: ProxyRequests Off <Proxy */myapp> Order deny,allow Allow from all </Proxy> ProxyPass /myapp http://www.example.com:8080/myapp ProxyPassReverse /myapp http://www.example.com:8080/myapp What I'm trying to do now is force all requests to myapp to be HTTPS, and then have those SSL requests follow the same proxy rules that strip out the port number as my application used to. Simply changing the ports 8080 to 8443 in the ProxyPass lines does not accomplish this. Unfortunately I'm not an expert in Apache, and my skills of trial and error are already reaching the end of the line. RewriteEngine On RewriteCond %{HTTPS} off RewriteRule myapp/* https://%{HTTP_HOST}%{REQUEST_URI} ProxyRequests Off <Proxy */myapp> Order deny,allow Allow from all </Proxy> SSLProxyEngine on ProxyPass /myapp https://www.example.com:8443/mloyalty ProxyPassReverse /myapp https://www.example.com:8433/mloyalty As this stands, a request to anything on the server other than /myapp load fine with http. If I make a browser http request to /mypp it then redirects to https:// www.example.com:8443/myapp , which is not the desired behavior. Links within the application then resolve to https:// www.example.com/myapp/linkedPage , which is desirable. Browser requests (http and https) to anything one level beyond just /myapp ie. /myapp/mycontext resolve to https:// www.example.com/myapp/mycontext without the port. I'm not sure what other information there is for me to give, but I think my goals should be clear.

  Read the article

• mysqld-nt.exe exist in task list, but actually it's not running?

  - by PHP

  mysqld-nt.exe is showing in the task manager, but I cannot connect to it. I tried: telnet localhost 3306 And it fails to connect. So I restarted the server,and it's ok. This happens every day. Any ideas? EDIT Here is the error log(I didn't find anything abnormal though): 100122 10:11:16 [Note] D:\MySQL\MySQL Server 5.0\bin\mysqld-nt: Normal shutdown 100122 10:11:16 InnoDB: Starting shutdown... 100122 10:11:18 InnoDB: Shutdown completed; log sequence number 0 22939338 100122 10:11:18 [Note] D:\MySQL\MySQL Server 5.0\bin\mysqld-nt: Shutdown complete 100122 10:12:40 InnoDB: Started; log sequence number 0 22939338 100122 10:12:42 [Note] D:\MySQL\MySQL Server 5.0\bin\mysqld-nt: ready for connections. Version: '5.0.24-community-nt' socket: '' port: 3306 MySQL Community Edition (GPL) 100123 16:20:44 [Note] D:\MySQL\MySQL Server 5.0\bin\mysqld-nt: Normal shutdown 100123 16:20:44 InnoDB: Starting shutdown... 100123 16:20:46 InnoDB: Shutdown completed; log sequence number 0 22939832 100123 16:20:46 [Note] D:\MySQL\MySQL Server 5.0\bin\mysqld-nt: Shutdown complete 100123 16:22:09 InnoDB: Started; log sequence number 0 22939832 100123 16:22:11 [Note] D:\MySQL\MySQL Server 5.0\bin\mysqld-nt: ready for connections. Version: '5.0.24-community-nt' socket: '' port: 3306 MySQL Community Edition (GPL) 100125 9:18:59 [Note] D:\MySQL\MySQL Server 5.0\bin\mysqld-nt: Normal shutdown 100125 9:18:59 InnoDB: Starting shutdown... 100125 9:19:00 InnoDB: Shutdown completed; log sequence number 0 22941001 100125 9:19:00 [Note] D:\MySQL\MySQL Server 5.0\bin\mysqld-nt: Shutdown complete 100125 9:20:22 InnoDB: Started; log sequence number 0 22941001 100125 9:20:25 [Note] D:\MySQL\MySQL Server 5.0\bin\mysqld-nt: ready for connections. Version: '5.0.24-community-nt' socket: '' port: 3306 MySQL Community Edition (GPL)

  Read the article

• Why just splitting an Ethernet cable does not work?

  - by Sin Jeong-hun

  I thought the Ethernet is logically one-line communication bus (for argument's sake, I am excluding hubs). All machines attached in the bus hears the same signals and the machines themselves try to avoid collisions by randomly backing off. http://computer.howstuffworks.com/ethernet6.htm If so, why splitting one Ethernet line from my home router into two and connecting two computers would not work? Why do I have to add a switch to it? *What the Internet said would not work. [4 port home router] ------[one Ethernet cable]-----[simple splitter]======[two computers] *What the Internet said I should do [4 port home router] ------[one Ethernet cable]-----[switch]======[two computers] Is this because of the signal degradation (reduced electric current)? Thank you for all the answers! The reason why I did not just use the two ports of my home router is... The 4-port gigabit router is in my room and I had put a computer in another room (also my room, though). Since wired network is far more reliable and secure, I had bought a long Ethernet cable and and connected the computer to the router. Now I was thinking about adding another computer to that room. I could buy another long Ethernet cable, but then there will be two cables between the rooms. The one line already is a minor annoyance, so I thought if I could share the one line between the two computers in that room. A switch would work, but it requires power and is a little bit pricey. That is why I wondered why it would not work to simply split the physical Ethernet cable. Apparently I do not completely understand how Ethernet and a switch work. I just have some bit of knowledge I heard in my college class.

  Read the article

• HSphere - Only sees Apache 2 Test Page after forced shutdown?

  - by Darkwoof

  Hi, I have a dedicated server running on a Dell PowerEdge 850 with CentOS 4.4 and HSphere 3.0 Patch 6 colocated at a datacenter. Last night my hosting company had to schedule a change in the power bar, and I gave the go ahead for them to shut down the server and bring it up when they are done. Since they do not have admin access to the machine, I suppose they did a forced shutdown. When the machine was brought up, I found that all my domains (and sub-domains) are now pointing to an "Apache 2 Test Page" instead of the pre-configured sites that were running prior to the shutdown. This apparently only affects the standard sites running on port 80 - my Webmin instance running at port 1000 is still accessible for example, as well as my HSphere control panel running at port 8080. I've checked the config settings using the HSphere UI for each of the sites, and didn't find anything wrong. I've also tried rebooting the server via SSH, which does not rectify the problem. I've previously done reboots with no issues; the sites would just come right back up when its done, but not this time. I'm guessing some configuration file got corrupted or overwritten this time? Anyone with experience with HSphere and can provide some advice on what's happened and how to solve it? Thanks. (I do not have an active support agreeement for HSphere since Parallels took over and increased the min. license to 200. I only had 25 license for use by family and friends.) Thanks in advance.

  Read the article

• Problems setting up VLC Sever/client streaming

  - by Ayos

  I'm trying to set up a Linux machine as the server and a Windows XP machine as the client. Both machines are connected to the same local network via a Wi-Fi router. I setup the stream with the following properties : http stream port 8080 play locally And not much else. No firewall on the windows client(Windows firewall is disabled) When I try to open network stream via the client machine(Using VLC or Windows Media Player) I get the following errors: Media Player error code : 0xC00D11B3: Encountered a network Problem. VLC Console: main warning: connection timed out access_mms error: cannot connect to 192.168.1.3:8080 main debug: no access module matching "http" could be loaded main debug: TIMER module_need() : 12625.810 ms - Total 12625.810 ms / 1 intvls (Avg 12625.809 ms) main error: open of `http://192.168.1.3:8080' failed main debug: dead input main debug: repeating item main debug: starting playback of the new playlist item main debug: resyncing on http://192.168.1.3:8080 main debug: http://192.168.1.3:8080 is at 0 main debug: creating new input thread main debug: Creating an input for 'http://192.168.1.3:8080' main debug: using timeshift granularity of 50 MiB, in path 'C:\DOCUME~1\Accer\LOCALS~1\Temp' main debug: `http://192.168.1.3:8080' gives access `http' demux `' path `192.168.1.3:8080' main debug: creating demux: access='http' demux='' location='192.168.1.3:8080' file='\\192.168.1.3:8080' main debug: looking for access_demux module: 0 candidates main debug: no access_demux module matched "http" main debug: TIMER module_need() : 0.461 ms - Total 0.461 ms / 1 intvls (Avg 0.461 ms) main debug: creating access 'http' location='192.168.1.3:8080', path='\\192.168.1.3:8080' main debug: looking for access module: 2 candidates access_http debug: http: server='192.168.1.3' port=8080 file='' main debug: net: connecting to 192.168.1.3 port 8080 qt4 debug: IM: Deleting the input main debug: TIMER input launching for 'http://192.168.1.3:8080' : 13397.979 ms - Total 13397.979 ms / 1 intvls (Avg 13397.978 ms) qt4 debug: IM: Setting an input Need Help. Thanks in advance.

  Read the article

• Why is my rsync so slow?

  - by iblue

  My Laptop and my workstation are both connected to a Gigabit Switch. Both are running Linux. But when I copy files with rsync, it performs badly. I get about 22 MB/s. Shouldn't I theoretically get about 125 MB/s? What is the limiting factor here? EDIT: I conducted some experiments. Write performance on the laptop The laptop has a xfs filesystem with full disk encryption. It uses aes-cbc-essiv:sha256 cipher mode with 256 bits key length. Disk write performance is 58.8 MB/s. iblue@nerdpol:~$ LANG=C dd if=/dev/zero of=test.img bs=1M count=1024 1073741824 Bytes (1.1 GB) copied, 18.2735 s, 58.8 MB/s Read performance on the workstation The files I copied are on a software RAID-5 over 5 HDDs. On top of the raid is a lvm. The volume itself is encrypted with the same cipher. The workstation has a FX-8150 cpu that has a native AES-NI instruction set which speeds up encryption. Disk read performance is 256 MB/s (cache was cold). iblue@raven:/mnt/bytemachine/imgs$ dd if=backup-1333796266.tar.bz2 of=/dev/null bs=1M 10213172008 bytes (10 GB) copied, 39.8882 s, 256 MB/s Network performance I ran iperf between the two clients. Network performance is 939 Mbit/s iblue@raven $ iperf -c 94.135.XXX ------------------------------------------------------------ Client connecting to 94.135.XXX, TCP port 5001 TCP window size: 23.2 KByte (default) ------------------------------------------------------------ [ 3] local 94.135.XXX port 59385 connected with 94.135.YYY port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.09 GBytes 939 Mbits/sec

  Read the article

• Bypass insane corporate security system

  - by user1665154

  I'm searching for a posibility to bypass the "Firewall" for 3-4 days. I've tried everything I know, so I ask here for a answer. We have no admin rights and the OS is Windows Vista There is an HTTP Proxy with NTML Authentication (only way to access the internet) It requires a username and password We use smart cards, in fact I have only a user number and a pin. Port 80 and 443 are open - I have an SSH server at home which is listening on port 443 The problem is that I need this proxy to connect to anything. Internet access only works in IE, Chrome, Firefox when I set the proxy settings to "use system proxy settings", "proxy-autoconfig (proxy.pac)" or when I enter the proxy inside the proxy.pac file. However I can't understand where they take the username and password which the Proxy requires. What I've tried was using cntlm to connect to the proxy with authentication (altought I have no PW and username) and PuTTY to create the SSH tunnel over port 443 whit the SOCKS Proxy which I've created with cntml. I've never found some SSH client which includes a "use system proxy settings" function.

  Read the article

• Varnish going sick

  - by junke1990

  I'm having trouble with Varnish, it works for a couple of views and then just goes sick... The weird thing is that it does work for about 20 or 30 requests. If I call apache directly it works fine. I'm running Varnish Version: 3.0.3-1 on Debian Squeeze and, for now, Apache on port 80 and Varnish on port 8080 on the same server.. I'm using https://github.com/mattiasgeniar/varnish-3.0-configuration-templates as base for my VCLs and modified the VCLs to support Concrete5. Anyone any clue on how I should debug this? backend default { .host = "127.0.0.1"; .port = "80"; .connect_timeout = 1.5s; .first_byte_timeout = 45s; .between_bytes_timeout = 30s; .probe = { .url = "/"; .timeout = 1s; .interval = 10s; .window = 10; .threshold = 8; } } LOG 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1353791312 1.0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1353791315 1.0 0 Backend_health - default Still sick 4--X-R- 0 8 10 0.000689 0.000000 HTTP/1.1 301 Moved Permanently (the 301 is because I check for www.)

  Read the article

• cannot get mssql working with sql server 2005

  - by Ryan

  I'm a MySQL/Apache user, trying my hand with IIS and SQL server, so please, if this is a stupid question have patience. I'm using IIS version 7.5. PHP version 5.3.13 and SQL server 2005 IIS is running on port 90, not sure if that will make a difference or not. I know my sql server is running because I can explore/connect to it in Server management studio. I know php is configured properly, because //localhost:90/phpinfo.php works fine. I updated the php_msql.dll extension in phpinfo to: extension=ext/php_msql.dll EDIT- However, when I run phpinfo() under the "configure command" row, this is present: --without-mssql I found/downloaded the ntwdblib.dll and placed it in both sys32 and php root. All these things were supposed to fix the issue, and they haven't. This is the code I'm using, straight from php.net: <?php // Server in the this format: <computer>\<instance name> or // <server>,<port> when using a non default port number $server = 'localhost'; // Connect to MSSQL $link = mssql_connect($server, 'uname', 'pwd'); if (!$link) { die('Something went wrong while connecting to MSSQL'); } ?> obviously I'm using a real username and password, but when I load the file in my browser, I receive a 500 error. Upon checking the log, this is what is displayed: 2012-06-25 12:41:29 ::1 GET /test.php - 90 - ::1 Mozilla/5.0+(Windows+NT+6.1;+WOW64)+AppleWebKit/536.5+(KHTML,+like+Gecko)+Chrome/19.0.1084.56+Safari/536.5 500 0 0 5 That (to me) doesn't help me much. What am I doing wrong? Thank you

  Read the article

• Migrate active directory to Google apps for business

  - by dewnix

  I've got a problem migrating active directory to Gapps. I'm stuck on google apps directory sync (GADS) where it just gives the error "java.lang.NullPointerException" after testing the connection during the LDAP configuration step. I checked the logs and I've pretty much determined that port 389 (standard LDAP port) isn't listening on the exchange server. I've tried telneting to it (from another machine in the same network) with no luck but I can telnet to other ports, that i know are open, successfully. I know they're open because I used portqry and netstat to see them. I'm suspecting that the active directory isn't even installed/running on this machine because there's no active directory services at all running on it. There's no active directory services that say they're NOT running either though. Is it possible AD is installed somewhere else? does it have to be on a machine inside the same network? I found the domain controller and it's host name and when I telnet with port 389, it works however GADS still gives me the same exact error when I substitute that server in. Actually, no matter what ridiculous settings i put into GADS, i still get that same NullPointer error. If i could get some different error than that NullPointer, i'd call that a successful day.

  Read the article

• cause for mysql crash

  - by user1322092

  A cron job automatically restarted my mysql database. What's the cause for the crash, or can you suggest how to resolve or monitor. I would REALLY appreciate your input. 120715 14:38:58 mysqld started 120715 14:38:58 InnoDB: Started; log sequence number 0 411137570 120715 14:38:58 [Note] /usr/libexec/mysqld: ready for connections. Version: '5.0.95' socket: '/var/lib/mysql/mysql.sock' port: 3306 Source distribution 120715 15:14:21 [Note] /usr/libexec/mysqld: Normal shutdown 120715 15:14:23 InnoDB: Starting shutdown... 120715 15:14:25 InnoDB: Shutdown completed; log sequence number 0 411166467 120715 15:14:25 [Note] /usr/libexec/mysqld: Shutdown complete 120715 08:14:25 mysqld ended 120715 08:14:26 mysqld started 120715 8:14:26 InnoDB: Started; log sequence number 0 411166467 120715 8:14:26 [Note] /usr/libexec/mysqld: ready for connections. Version: '5.0.95' socket: '/var/lib/mysql/mysql.sock' port: 3306 Source distribution 121212 09:15:32 mysqld started InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 121212 9:15:58 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 121212 9:17:28 InnoDB: Started; log sequence number 0 554145193 121212 9:17:57 [Note] /usr/libexec/mysqld: ready for connections. Version: '5.0.95' socket: '/var/lib/mysql/mysql.sock' port: 3306 Source distribution

  Read the article

• Locate devices within a building

  - by ams0

  The situation: Our company is spread between two floors in a building. Every employee has a laptop (macbook Air or MacbookPro) and an iPhone. We have static DHCP mappings and DNS resolution so every mobile gets a name like employeeiphone.example.com, every macbook air gets a employeelaptop.example.com and every macbook pro gets a employeelaptop.example.com on the Ethernet interface (the wifi gets a dynamic IP from a small range dedicated for the purpose). We know each and every MAC address of phones and laptops, since we do DHCP static mapping (ISC DHCP server runs on linux). At each floor we have a Netgear stack of two switches, connected via 10GB fiber to each other. No VLANs so far. At every floor there are 4 Airport Extreme making a single SSID network with WPA2 authentication. The request: Our CTO wants to know who is present at which floor. My solution (so far): Every switch contains an table listing MAC address and originating port. On each switch stack, all the MAC addresses coming from the other floor are listed as coming on port 48 (the fiber link). So I came up with: 1) Get the table from each switch via SNMP 2) Filter out the ones associated with port 48 3) Grep dhcpd.conf, removing all entries not *laptop and not *iphone 4) Match the two lists for each switch, output in JSON or XML 5) present the results on a dashboard for all to see I wrote it in bash with a lot of awk and sed, it kinda works but I always have for some reason stale entries in the switch lookup tables, making it unreliable; some people may have put their laptop to sleep, their iphones drop connections after a while, if not woken up and so on..I searched left and right, we are prepared to spend a little on the project too (RFIDs?), does anybody do something similar? I can provide with the script if needed (although it's really specific to our switches and naming scheme). Thanks! p.s. perhaps is this a question for stackoverflow? please move if it so.

  Read the article

• DNAT from localhost (127.0.0.1)

  - by pts

  I'd like to set up a TCP DNAT from 127.0.0.1, port 4242 to 11.22.33.44, port 5353 on Linux 3.x (currently 3.2.52, but I can upgrade if needed). It looks like the simple DNAT rule setup doesn't work, telnet 127.0.0.1 4242 hangs for a minute in Trying 127.0.0.1..., and then it times out. Maybe it's because the kernel is discarding the returning packets (e.g. SYN+ACK), because it considers them Martian. I don't need an explanation why the simple solution doesn't work, I need a solution, even if it's complicated (e.g. it involves creating may rules). I could set up a usual DNAT from another local IP address, outside the 127.0.0.0/8 network, but now I need 127.0.0.1 as the destination address. I know that I can set up a user-level port forwarding process, but now I need a solution which can be set up using iptables and doesn't need helper processes. I was googling for this for an hour. It was asked multiple times, but I couldn't find any working solutions. Also there are many questions about DNAT to 127.0.0.1, but I don't need that, I need the opposite.

  Read the article

• Possible Hack with FTP - What are the solutions?

  - by iamrohitbanga

  I was reading the FTP rfc and hence had this idea. Suppose there are several public ftp servers that allow anonymous user login. I open a control connection on port 21 to each of these servers. Now suppose there is a web server a.com with ip address x.y.z.w listening on port 80. FTP allows a user to specify the host on which the data connection is to be setup. So a user specifies the host and port number of a.com web server. Now the ftp server starts sending data to a.com for which it is not a valid HTTP request and hence it is rejected. But a.com notes that the invalid http request came from a public ftp server and not my ip address. Can this not lead to a distributed attack by utilizing all public ftp servers. worse still the the data being sent by ftp server could be a valid http request which could trigger a.com to send a file back to the ftp server. Is there a solution for this or is it no problem at all.

  Read the article

• All USB ports on my laptop are dead, any options via Ethernet, SD/MMC or HDMI?

  - by carbontracking

  My son's laptop has taken alot of pain in his school over the last few months and he and his buddies have succeeded in breaking both USB ports. I've opened the box, unsoldered the USB ports, replaced them by new components but no joy - the ports seem dead. If I assume that the insertion of LEGO pieces, etc. in USB ports has rendered them unsalvageable, do I have any other options for restoring USB access to the laptop? The laptop has an ethernet port, a HDMI port and an SD/MMC port. I've trawled the web for a magic adadpter, i.e; ethernet=USB, HDMI=USB or SD/MMC=USB but to no avail. Lots of options for going the other way though. Does anyone have any ideas on the feasibility of an ethernet=USB cable? Ethernet doesn't seem to have +5V or GND so I can run a cable from the motherboard that could provide those. Amazing how many functions of a laptop just disappear when you have no USB ports.

  Read the article

• Why can't I connect to my home SSH (SFTP) server? What am I doing wrong?

  - by Rolo

  I am new to this topic of creating a SFTP server on one's computer. I would like to be able to access the folder on my Windows XP computer via SFTP from another computer or a phone. The following is what I have done so far: I have installed SSH Windows and everything is setup correctly because I can access it (the folder on my pc) via WinSCP. I however cannot access it from my phone. It doesn't connect. The phone can be on the same wireless network as the Windows XP computer, but I would prefer to be able to access this when not in the same network. Now, from what I have read and understood, the following is the information needed to connect: 1) Host Name: This would be my computer's ip address which I access by typing ipconfig in a cmd prompt (I access this easily on my computer because I simply put in localhost or 127.0.0.1) 2) Port Number: That would be port 22 (I have also added this to my router in the port forwarding section). 3) Username: This would be my Windows XP username. This however is my full name, including my middle initial followed by a period. I am wondering if this is maybe causing problems in accessing it from my phone, since the name has spaces and punctuation (the period). 4) Password: The password of my Windows XP computer Extra Info: When I say phone, I mean an Android phone and I am using an ftp / sftp app to access my pc via the phone's cellular network (I also tried the wireless, but that didn't work as well). I have tried more than one program. On one program it tells me Connection timed out and on another it tells me "timeout:socket is not established" Also, I know that I can use the site noip, but I prefer to connect this way first. Also, because I am new to this, I would like to look into what exactly noip is doing and if they would be seeing my files as they are transferred from phone to pc. Thanking you in advance for your help.

  Read the article

• apache front-end rewriting URL to different https ports?

  - by khedron

  Hi all, One of my users is having some trouble with forwarding to an internal web app from a public address. Everything worked fine for him when the situation was like this: front page: http://www.myexample.com/ public ref to internal app: http://www.example.com/app-8903/app.html secretly goes to: http://secret.example.com:8903/app-8903/app.html This is to say, my user is providing the very last URL, with the port information duplicated in the URL base, and they were using that to give a public face that hid both the port and the internal machine name. You could still read the port in the URL base if you looked, but the obvious reference and machine name were hidden. Doing it this way, he could have several different instances of the application running on secret.example.com with different ports, and on the front end it just looked like it was changing the URL directory/base. Now the user wants to do the same thing over https:, and the people helping him with apache config say it can't be done. Is that so? Without being there to tinker with the configuration myself, I'm not sure what his IT people have tried, but reading through the apache2 SSL FAQ and other docs, it seems like it should be possible to rewrite URLs to different ports and still use https:.

  Read the article

• How to prevent response to who-has requests on virtual eth interface?

  - by user42881

  Hi, we use small embedded X86 linux servers equipped with a single physical ethernet port as a gateway for an IP video surveillance application. Each downstream IP cam is mapped to a separate virtual IP address like this: real eth0 IP address= 192.168.1.1, camera 1 (eth0:1) =192.168.1.61, camera 2 (eth0:2) =192.168.1.62, etc. etc. all on the same eth0 physical port. This approach works well, except that a specific third-party windows video recording application running on a separate PC on the same LAN, automatically pings the virtual IPs looking for unique who-has responses on system startup and, when it gets back the same eth0 MAC address for each virtual interface, freaks out and won't allow us to subsequently manually enter those addresses. The windows app doesn't mind, tho, if it receives no answer to the who-has ping. My question - how can we either (a) shut off the who-has responses just for the virtual eth0:x interfaces while keeping them for the primary physical eth0 port, or, in the alternative, spoof a valid but different MAC address for each virtual interface? Thanks!

  Read the article

• IPtables and Remote Desktop with Proxy

  - by Sebastian

  So I setup a windows 2008 web server R2 on VirtualBox. Currently using Bridged Network. I can remote desktop to the machine hosting the VM (10.0.0.183) but cannot remote desktop to the VM itself (10.0.0.195). The remote port on the VM set to 5003. VM setup to accept remote connections (windows side). We also use a proxy for our internet, and I added these rules under NAT. (centOS 5) on our proxy box. -A INPUT -p tcp --dport 3389 -j ACCEPT -A REROUTING -i ppp0 -p tcp --dport 3389 -j REDIRECT --to-port 5003 -A FORWARD -d 10.0.0.195 --dport 5003 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT I've been trying for hours and hours and just cannot get it to work. I also used freedns so that we can use a domain name to connect too this VM over the internet. (the DNS points to our external IP address). If we don't get this right we will have to purchase a PPoE from an ISP to connect to this VM remotely, but I know that there is an alternative route if I can just get this port forwarding right!

  Read the article

• How to decouple development server from Internet?

  - by intoxicated.roamer

  I am working in a small set-up where there are 4 developers (might grow to 6 or 8 in cuople of years). I want to set-up an environment in which developers get an internet access but can not share any data from the company on internet. I have thought of the following plan: Set-up a centralized git server (Debian). The server will have an internet access. A developer will only have git account on that server, and won't have any other account on it. Do not give internet access to developer's individual machine (Windows XP/Windows 7). Run a virtual machine (any multi-user OS) on the centralized server (the same one on which git is hosted). Developer will have an account on this virtual machine. He/she can access internet via this virtual machine. Any data-movement between this virtual machine and underlying server, as well as any of the developer's machine, is prohibited. All developers require USB port on their local machine, so that they can burn their code into a microcontroller. This port will be made available only to associated software that dumps the code in a microcontroller (MPLAB in current case). All other softwares will be prohibited from accessing the port. As more developers get added, providing internet support for them will become difficult with this plan as it will slow down the virtual machine running on the server. Can anyone suggest an alternative ? Are there any obvious flaws in the above plan ? Some key details of the server are as below: 1) OS:Debian 2) RAM: 8GB 3) CPU: Intel Xeon E3-1220v2 4C/4T

  Read the article

• MAC-Address based routing

  - by d-fens

  Here is what i want to do: I have a bunch of systems, some might have the same Public-IP, i disable ARP. I have a Firewall (either IP Layer or bridge-FW) between these systems and the internet. Depending on the destination port of incoming IP-Packets to some of these Public-IPs i want to set the destinsation-Ethernet-Adress. So for instance System A has IP 8.8.8.8, mac de:ad:be:ef:de:ad, arp disabled System B has IP 8.8.8.8, mac 1f:1f:1f:1f:1f:1f, arp disabled Firewall has IP 8.8.8.1, arp disabled on that interface Incoming packet to IP 8.8.8.8 tcp dest port 100 Incoming packet to IP 8.8.8.8 tcp dest port 101 Firewall sets dest-mac for 1.) - de:ad:be:ef:de:ad Firewall sets dest-mac for 2.) - 1f:1f:1f:1f:1f:1f Second scenario: System A and System B establish outgoing TCP-Connections, and the firewall matches the dst-mac of the incoming IP-Packets (response packets) to the senders-mac address. is this possible in any way with linux and iptables? edit: i read ebtables might "work" in a hackish way for this purpose but i am not sure...

  Read the article

• using virtual machine like mySql server

  - by ffmm

  i'm developing a java program and i need a database. Now i'm using MAMP and it's pretty easy but i would have a virtual machine (ubuntu server) and i need to connect my java program with this virtual machine using vitualBox. the situation: I installed VirtualBox on my mac and I installed an ubuntu-server machine set "bridge adapter" in the network settings of VB I installed mysql on ubuntu-server and i created a simple database (all work well by ubuntu) doing ifconfig by ubuntu I get the ip: 192.168.1.217 so in the java program i made this function: public static Connection connect(String host, int port, String dbName, String user, String passwd) { Connection dbConnection = null; try { String dbString = null; Class.forName("com.mysql.jdbc.Driver").newInstance(); dbString = "jdbc:mysql://" + host + ":" + port + "/" + dbName; dbConnection = DriverManager.getConnection(dbString, user, passwd); } catch (Exception e) { System.err.println("Failed to connect with the DB"); e.printStackTrace(); } return dbConnection; } and in the main() i use: Connection con = connect(1, "192.168.1.217", 3306, "Ciao", "root", "cocacola"); 3306 was a default value. I don't know if is correct, it works on mamp, but…. how I can find the correct port that I have to use with VB? when I ran the program I get the catch excepion… what's wrong? ps: i have to install apache o something else?

  Read the article

• I'm having trouble getting my server to appear online.

  - by JMRboosties

  Total newb question I'm sure. First I had installed WAMP (http://www.wampserver.com), and I was able to access my pages from other computers in my router network, and the virtual device used to debug Android programs (the purpose of my having a server). This functionality failed, however, at some point over these past few days. While my own browser displays the pages just fine, other computers, my Android phone (on our room's wifi), and my virtual device are no longer able to connect to my pages. I had not made any changes in the settings. I uninstalled WAMP and installed EasyPHP. However, the problem was not resolved. I know this is rather vague, but does anyone here have an idea of what may have happened? I forwarded both port 80 (I know its the default HTTP port, I did it just to be safe), and now port 8888 which EasyPHP uses. I turned my firewall on my hosting computer off for good measure. I cannot access my pages from neither remote computers or computers using my router. Any ideas you may have on how to resolve this would be awesome, thanks a lot. And if you need anymore info please tell me.

  Read the article

• Beginner Geek: Scan Files for Viruses Before Using Them

  - by Mysticgeek

  To help avoid getting your computer infected by malicious software, it’s a good idea to scan files before executing them. Today we take a look at a couple of options that will let you scan files easily from your desktop. Scan File with Your Antivirus Software Most Antivirus software will put an option in the context menu so you can scan individual files. After downloading a file or email attachment, simply right-click the file and select the option to scan with your Antivirus software. If you want to scan more than one at a time, hold down the Ctrl key while you clicking each file you want to scan. Then right-click and select to scan with your Antivirus software. Here is our favorite Antivirus app, Microsoft Security Essentials scanning a couple of files. If a virus is found, your Antivirus app will delete it or put it in Quarantine so it cannot infect your system. Using VirusTotal Uploader To be very thorough and want a second opinion (actually 41), then you might want to check out the VirusTotal Uploader. This handy app will scan your files with 41 different Antivirus apps online. After installing VirusTotal Uploader, right-click the file, go to Send To, then VirusTotal. Alternately you can launch VirusTotal Uploader and Get and upload the file. It will send the file to VirusTotal.com and scan it with 41 different Antivirus apps and show you the results.   If you don’t want to install the Uploader, you can go to the VirusTotal site and upload a file from there to scan. We’ve noticed that occasionally there will be a false positive detected on files we know are clean. Sometimes the definition database of an Anti-malware app isn’t current, or an obscure Antivirus App will find something questionable. If that is the case, use your best judgment when viewing the results. Conclusion Most Antivirus apps today have real-time scanning and should be able to detect possible infections before you’re able to execute them. However, if they don’t or when in doubt, following these tips can save you a lot of headaches in the long run. If you use a lot of different flash drives throughout the day, check out our article on how to scan a thumb drive for viruses from the AutoPlay Dialog. Download Microsoft Security Essentials Download VirusTotal Uploader VirusTotal Website Similar Articles Productive Geek Tips Scan Files for Viruses Before You Download With Dr.WebMake Microsoft Security Essentials Scan Faster by Excluding Certain File TypesBeginner Geek: Delete User Accounts in Windows 7Scan Your Thumb Drive for Viruses from the AutoPlay DialogSecure Computing: Free Anti-Virus Protection With AVG Free Edition TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7 Map the Stars with Stellarium Use ILovePDF To Split and Merge PDF Files TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox

  Read the article

< Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >