Search Results

Search found 3857 results on 155 pages for 'teach my family'.

Page 133/155 | < Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >

• Installing drivers for switchable graphics

  - by Anonymous

  I recently bought a laptop that came with Windows 7 64-bit installed. I have some older (16-bit and 32-bit) software that doesn't work with 64-bit Windows, but works just fine with 32-bit. Since I also wanted to get rid of all of the pre-installed spam, I decided to wipe the hard drive and install a fresh copy of Windows 7 32-bit. I can't get the graphics cards working. This laptop uses switchable graphics, an Intel card and a Radeon card. I first tried installing this driver from Intel, which works for the Intel card. Of course, the Radeon card doesn't work with this driver and I need it for some of the newer games I have. I also tried this driver. Windows's device manager will recognize the Radeon card, but it will still use the Intel card. Also, even though that package says it contains the Intel driver, the Intel card still isn't properly recognized by Windows (leaving me with a nasty 800x600 resolution). On top of that, the Catalyst Control Center won't open (saying "The Catalyst Control Center is not supported by the driver version of your enabled graphics adapter") I tried installing HP's driver then installing Intel's driver on top of it. Device manager will then recognize both graphics cards properly. However, the laptop still uses the Intel card. The CCC still won't start (saying the same thing as before) and I can't find any of 'switching' graphics cards. Before formatting, I could right-click the desktop and click "Configure Switchable Graphics" This option hasn't been in the context menu regardless of what driver(s) I've installed. After some research, I found out that this menu entry runs the command "cli.exe Start PowerXpressHybrid" I've tried manually running this command, but I get the same unsupported message from CCC. So, does anyone know how I can get this working? I would like to be able to switch between the Intel and Radeon. But, if there's some way to disable the Intel and use only the Radeon, that would be fine I dual-boot with Linux (framebuffer uses the Intel, haven't even tried getting X set up yet) Here's the output of lspci # lspci -v | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M] (prog-if 00 [VGA controller]) The laptop is a HP Pavilion g6t-1d00. HP doesn't support installing anything but Windows 7 64-bit, so calling tech support isn't an option. Thanks for any help UPDATE: I finally got it working. After a fresh install of Windows 7, I installed the HP driver (the one linked above). Then, there's an optional Windows update I installed (don't remember the exact name, but it'll stick out). After that, graphics switching works just like it's supposed to. Moab, thanks anyways for your help

  Read the article

• How can I read individual lines of a CSV file into a string array, to then be selectively displayed

  - by Ryan

  I need your help, guys! :| I've got myself a CSV file with the following contents: 1,The Compact,1.8GHz,1024MB,160GB,440 2,The Medium,2.4GHz,1024MB,180GB,500 3,The Workhorse,2.4GHz,2048MB,220GB,650 It's a list of computer systems, basically, that the user can purchase. I need to read this file, line-by-line, into an array. Let's call this array csvline(). The first line of the text file would stored in csvline(0). Line two would be stored in csvline(1). And so on. (I've started with zero because that's where VB starts its arrays). A drop-down list would then enable the user to select 1, 2 or 3 (or however many lines/systems are stored in the file). Upon selecting a number - say, 1 - csvline(0) would be displayed inside a textbox (textbox1, let's say). If 2 was selected, csvline(1) would be displayed, and so on. It's not the formatting I need help with, though; that's the easy part. I just need someone to help teach me how to read a CSV file line-by-line, putting each line into a string array - csvlines(count) - then increment count by one so that the next line is read into another slot. So far, I've been able to paste the numbers of each system into an combobox: Using csvfileparser As New Microsoft.VisualBasic.FileIO.TextFieldParser _ ("F:\folder\programname\programname\bin\Debug\systems.csv") Dim csvalue As String() csvfileparser.TextFieldType = Microsoft.VisualBasic.FileIO.FieldType.Delimited csvfileparser.Delimiters = New String() {","} While Not csvfileparser.EndOfData csvalue = csvfileparser.ReadFields() combobox1.Items.Add(String.Format("{1}{0}", _ Environment.NewLine, _ csvalue(0))) End While End Using But this only selects individual values. I need to figure out how selecting one of these numbers in the combobox can trigger textbox1 to be appended with just that line (I can handle the formatting, using the string.format stuff). If I try to do this using csvalue = csvtranslator.ReadLine , I get the following error message: "Error 1 Value of type 'String' cannot be converted to '1-dimensional array of String'." If I then put it as an array, ie: csvalue() = csvtranslator.ReadLine , I then get a different error message: "Error 1 Number of indices is less than the number of dimensions of the indexed array." What's the knack, guys? I've spent hours trying to figure this out. Please go easy on me - and keep any responses ultra-simple for my newbie brain - I'm very new to all this programming malarkey and just starting out! :)

  Read the article

• Secure ldap problem

  - by neverland

  I have tried to config my openldap to have secure connection by using openssl on Debian5. By the way, I got trouble during the below command. ldap:/etc/ldap# slapd -h 'ldap:// ldaps://' -d1 >>> slap_listener(ldaps://) connection_get(15): got connid=7 connection_read(15): checking for input on id=7 connection_get(15): got connid=7 connection_read(15): checking for input on id=7 connection_get(15): got connid=7 connection_read(15): checking for input on id=7 connection_get(15): got connid=7 connection_read(15): checking for input on id=7 connection_read(15): unable to get TLS client DN, error=49 id=7 connection_get(15): got connid=7 connection_read(15): checking for input on id=7 ber_get_next ber_get_next on fd 15 failed errno=0 (Success) connection_closing: readying conn=7 sd=15 for close connection_close: conn=7 sd=15 Then I have search for "unable to get TLS client DN, error=49 id=7" but it seems no where has a good solution to this yet. Please help. Thanks # Well, I try to fix something to get it work but now I got this ldap:~# slapd -d 256 -f /etc/openldap/slapd.conf @(#) $OpenLDAP: slapd 2.4.11 (Nov 26 2009 09:17:06) $ root@SD6-Casa:/tmp/buildd/openldap-2.4.11/debian/build/servers/slapd could not stat config file "/etc/openldap/slapd.conf": No such file or directory (2) slapd stopped. connections_destroy: nothing to destroy. What should I do now? log : ldap:~# /etc/init.d/slapd start Starting OpenLDAP: slapd - failed. The operation failed but no output was produced. For hints on what went wrong please refer to the system's logfiles (e.g. /var/log/syslog) or try running the daemon in Debug mode like via "slapd -d 16383" (warning: this will create copious output). Below, you can find the command line options used by this script to run slapd. Do not forget to specify those options if you want to look to debugging output: slapd -h 'ldaps:///' -g openldap -u openldap -f /etc/ldap/slapd.conf ldap:~# tail /var/log/messages Feb 8 16:53:27 ldap kernel: [ 123.582757] intel8x0_measure_ac97_clock: measured 57614 usecs Feb 8 16:53:27 ldap kernel: [ 123.582801] intel8x0: measured clock 172041 rejected Feb 8 16:53:27 ldap kernel: [ 123.582825] intel8x0: clocking to 48000 Feb 8 16:53:27 ldap kernel: [ 131.469687] Adding 240932k swap on /dev/hda5. Priority:-1 extents:1 across:240932k Feb 8 16:53:27 ldap kernel: [ 133.432131] EXT3 FS on hda1, internal journal Feb 8 16:53:27 ldap kernel: [ 135.478218] loop: module loaded Feb 8 16:53:27 ldap kernel: [ 141.348104] eth0: link up, 100Mbps, full-duplex Feb 8 16:53:27 ldap rsyslogd: [origin software="rsyslogd" swVersion="3.18.6" x-pid="1705" x-info="http://www.rsyslog.com"] restart Feb 8 16:53:34 ldap kernel: [ 159.217171] NET: Registered protocol family 10 Feb 8 16:53:34 ldap kernel: [ 159.220083] lo: Disabled Privacy Extensions

  Read the article

• Neural Networks in C# using NeuronDotNet

  - by kingrichard2005

  Hello, I'm testing the NeuronDotNet library for a class assignment using C#. I have a very simple console application that I'm using to test some of the code snippets provided in the manual fro the library, the goal of the assignment is to teach the program how to distinguish between random points in a square which may or may not be within a circle that is also inside the square. So basically, which points inside the square are also inside the circle. Here is what I have so far: namespace _469_A7 { class Program { static void Main(string[] args) { //Initlaize the backpropogation network LinearLayer inputLayer = new LinearLayer(2); SigmoidLayer hiddenLayer = new SigmoidLayer(8); SigmoidLayer outputLayer = new SigmoidLayer(2); new BackpropagationConnector(inputLayer, hiddenLayer); new BackpropagationConnector(hiddenLayer, outputLayer); BackpropagationNetwork network = new BackpropagationNetwork(inputLayer, outputLayer); //Generate a training set for the ANN TrainingSet trainingSet = new TrainingSet(2, 2); //TEST: Generate random set of points and add to training set, //for testing purposes start with 10 samples; Point p; Program program = new Program(); //Used to access randdouble function Random rand = new Random(); for(int i = 0; i < 10; i++) { //These points will be within the circle radius Type A if(rand.NextDouble() > 0.5) { p = new Point(rand.NextDouble(), rand.NextDouble()); trainingSet.Add(new TrainingSample(new double[2] { p.getX(), p.getY() }, new double[2] { 1, 0 })); continue; } //These points will either be on the border or outside the circle Type B p = new Point(program.randdouble(1.0, 4.0), program.randdouble(1.0, 4.0)); trainingSet.Add(new TrainingSample(new double[2] { p.getX(), p.getY() }, new double[2] { 0, 1 })); } //Start network learning network.Learn(trainingSet, 100); //Stop network learning //network.StopLearning(); } //generates a psuedo-random double between min and max public double randdouble(double min, double max) { Random rand = new Random(); if (min > max) { return rand.NextDouble() * (min - max) + max; } else { return rand.NextDouble() * (max - min) + min; } } } //Class defines a point in X/Y coordinates public class Point { private double X; private double Y; public Point(double xVal, double yVal) { this.X = xVal; this.Y = yVal; } public double getX() { return X; } public double getY() { return Y; } } } This is basically all that I need, the only question I have is how to handle output?? More specifically, I need to output the value of the "step size" and the momentum, although it would be nice to output other information as well. Anyone with experience using NeuronDotNet, your input is appreciated.

  Read the article

• Deleting windows.edb and unchecking Indexing service lead to hard drive file records swapping

  - by linni

  I followed the instructions listed here:http://www.mydigitallife.info/2007/09/18/turn-off-and-disable-search-indexing-service-in-windows-xp/ to free up space on hard drive by deleting the windows.edb indexing file... I also stopped windows search service as mentioned in the comments following the article. In addition to unchecking the "Allow Indexing Service to index this disk for fast file searching" check box on the properties dialog for the C:\ drive, I did the same for two usb connected hard drives (J:\ and I:\ ). I'm not sure why I did that, thought it might shrink the windows.edb file so I wouldn't have to delete it (which sounded a bit risky in my ears at the time). The file of course didn't shrink so I ended up deleting it and freeing up over 3 GB of space, yeehaw. However, as soon as I had done this I could not access the usb connected hard drives anymore. The error I got was "I:\photos is not accessible" "The file or directory is corrupted and unreadable" when I tried to open the photos directory on I:\ Here is where I enter the twilight zone... I try disconnecting I:\ usb hard drive. But XP shows me that instead J:\ drive has disconnected and I:\ is still there. So I disconnect both drives and restart the computer. I then connect one drive, but it lists up the contents of the other drive on root level. I tried connecting the drives vice versa and the same thing happens. I try taking one of the hard drives to another computer and when I connect it there it lists up not its own contents but the contents of the other hard drive and gives the same error as above when I try and access any of the folders (even folders on the root that have the same name as folders on the other drive (e.g. J:\photos and I:\photos)??? And no, this is not a me mixing up my drive letters. Computer Manager - Disk management shows the same result as explorer: The drive size is correct (one is 500GB, the other is 640GB) but the drive name is of the opposite drive, as long as the contents. Also, one drive was full of data and the other almost empty but they incorrectly show their free space status of the other drive. Somehow the usb drives seem to have switched file tables, file records, boot records or something, extremely weird! Even weirder, if I try and create a text file or folder on this drive, it works fine, accessing them, saving, whatever, all good, but accessing any other data on the drive gives me an error. Does anyone have a clue what is going on and more importantly, how I can restore the correct folder listings to access my family photos ??? cheers, linni

  Read the article

• Secure ldap problem

  - by neverland

  Hi there, I have tried to config my openldap to have secure connection by using openssl on Debian5. By the way, I got trouble during the below command. ldap:/etc/ldap# slapd -h 'ldap:// ldaps://' -d1 >>> slap_listener(ldaps://) connection_get(15): got connid=7 connection_read(15): checking for input on id=7 connection_get(15): got connid=7 connection_read(15): checking for input on id=7 connection_get(15): got connid=7 connection_read(15): checking for input on id=7 connection_get(15): got connid=7 connection_read(15): checking for input on id=7 connection_read(15): unable to get TLS client DN, error=49 id=7 connection_get(15): got connid=7 connection_read(15): checking for input on id=7 ber_get_next ber_get_next on fd 15 failed errno=0 (Success) connection_closing: readying conn=7 sd=15 for close connection_close: conn=7 sd=15 Then I have search for "unable to get TLS client DN, error=49 id=7" but it seems no where has a good solution to this yet. Please help. Thanks # Well, I try to fix something to get it work but now I got this ldap:~# slapd -d 256 -f /etc/openldap/slapd.conf @(#) $OpenLDAP: slapd 2.4.11 (Nov 26 2009 09:17:06) $ root@SD6-Casa:/tmp/buildd/openldap-2.4.11/debian/build/servers/slapd could not stat config file "/etc/openldap/slapd.conf": No such file or directory (2) slapd stopped. connections_destroy: nothing to destroy. What should I do now? log : ldap:~# /etc/init.d/slapd start Starting OpenLDAP: slapd - failed. The operation failed but no output was produced. For hints on what went wrong please refer to the system's logfiles (e.g. /var/log/syslog) or try running the daemon in Debug mode like via "slapd -d 16383" (warning: this will create copious output). Below, you can find the command line options used by this script to run slapd. Do not forget to specify those options if you want to look to debugging output: slapd -h 'ldaps:///' -g openldap -u openldap -f /etc/ldap/slapd.conf ldap:~# tail /var/log/messages Feb 8 16:53:27 ldap kernel: [ 123.582757] intel8x0_measure_ac97_clock: measured 57614 usecs Feb 8 16:53:27 ldap kernel: [ 123.582801] intel8x0: measured clock 172041 rejected Feb 8 16:53:27 ldap kernel: [ 123.582825] intel8x0: clocking to 48000 Feb 8 16:53:27 ldap kernel: [ 131.469687] Adding 240932k swap on /dev/hda5. Priority:-1 extents:1 across:240932k Feb 8 16:53:27 ldap kernel: [ 133.432131] EXT3 FS on hda1, internal journal Feb 8 16:53:27 ldap kernel: [ 135.478218] loop: module loaded Feb 8 16:53:27 ldap kernel: [ 141.348104] eth0: link up, 100Mbps, full-duplex Feb 8 16:53:27 ldap rsyslogd: [origin software="rsyslogd" swVersion="3.18.6" x-pid="1705" x-info="http://www.rsyslog.com"] restart Feb 8 16:53:34 ldap kernel: [ 159.217171] NET: Registered protocol family 10 Feb 8 16:53:34 ldap kernel: [ 159.220083] lo: Disabled Privacy Extensions

  Read the article

• draw ellipse in MFC C++ just use OPENGL?

  - by taki

  i trying to draw ellipse in MFC C++ just use OPENGL. it ran for the resulting ellipse but it is not correct mouse coordinates. My code: in class Ellispe.cpp void VeEllispe::putPixel(int x,int y,int xc, int yc) { glBegin(GL_POINTS);// bat dau bang ve diem glVertex2i(xc+x,yc+y); glVertex2i(xc-x,yc-y); glVertex2i(xc+x,yc-y); glVertex2i(xc-x,yc+y); glEnd(); } void VeEllispe::Draw(int a, int b,int xc,int yc) { int x = 0; int y = b; float a2 = (a*a); float b2 = (b*b); float p = b2 - a2*b + 0.25*a2; while(2*b2*x <= 2*y*a2) { putPixel(x,y,xc,yc); if (p < 0) p+= 2*b2*x + 3*b2; else { p+= 2*b2*x + 3*b2 - 2*a2*y + 2*a2; y--; } x++; } x = a; y = 0; p = a2 - b2*a + 0.25*b2; while(2*a2*y <= 2*x*b2) { putPixel(x,y,xc, yc); if (p < 0) p+= 2*a2*y + 3*a2; else { p+= 2*a2*y + 3*a2 - 2*b2*x + 2*b2; x--; } y++; } } in class XYZView.cpp . . VeEllispe e; void Cbaitap1View::OnDraw(CDC* /*pDC*/) { Cbaitap1Doc* pDoc = GetDocument(); ASSERT_VALID(pDoc); if (!pDoc) return; wglMakeCurrent(m_hDC,m_hRC); glClear(GL_COLOR_BUFFER_BIT); glClearColor(1.0,1.0,1.0,0.0); glColor3f(0.0,0.0,1.0); glPointSize(2); if (state==4) e.Draw(X2,Y2,X1,Y1); glFlush(); SwapBuffers(::GetDC(GetSafeHwnd())); wglMakeCurrent(NULL,NULL); } And if possible, can you teach me the document to drawing triangles or parapol use OPENGL?

  Read the article

• Deleting windows.edb and unchecking Indexing service lead to hard drive file records swapping

  - by linni

  I followed the instructions listed here:http://www.mydigitallife.info/2007/09/18/turn-off-and-disable-search-indexing-service-in-windows-xp/ to free up space on hard drive by deleting the windows.edb indexing file... I also stopped windows search service as mentioned in the comments following the article. In addition to unchecking the "Allow Indexing Service to index this disk for fast file searching" check box on the properties dialog for the C:\ drive, I did the same for two usb connected hard drives (J:\ and I:\ ). I'm not sure why I did that, thought it might shrink the windows.edb file so I wouldn't have to delete it (which sounded a bit risky in my ears at the time). The file of course didn't shrink so I ended up deleting it and freeing up over 3 GB of space, yeehaw. However, as soon as I had done this I could not access the usb connected hard drives anymore. The error I got was "I:\photos is not accessible" "The file or directory is corrupted and unreadable" when I tried to open the photos directory on I:\ Here is where I enter the twilight zone... I try disconnecting I:\ usb hard drive. But XP shows me that instead J:\ drive has disconnected and I:\ is still there. So I disconnect both drives and restart the computer. I then connect one drive, but it lists up the contents of the other drive on root level. I tried connecting the drives vice versa and the same thing happens. I try taking one of the hard drives to another computer and when I connect it there it lists up not its own contents but the contents of the other hard drive and gives the same error as above when I try and access any of the folders (even folders on the root that have the same name as folders on the other drive (e.g. J:\photos and I:\photos)??? And no, this is not a me mixing up my drive letters. Computer Manager - Disk management shows the same result as explorer: The drive size is correct (one is 500GB, the other is 640GB) but the drive name is of the opposite drive, as long as the contents. Also, one drive was full of data and the other almost empty but they incorrectly show their free space status of the other drive. Somehow the usb drives seem to have switched file tables, file records, boot records or something, extremely weird! Even weirder, if I try and create a text file or folder on this drive, it works fine, accessing them, saving, whatever, all good, but accessing any other data on the drive gives me an error. Does anyone have a clue what is going on and more importantly, how I can restore the correct folder listings to access my family photos ??? cheers, linni

  Read the article

• how to read mac address with sed vs python

  - by getjoefree

  before, i can read mac with awk tools in windows or winpe, but now it don't support winpe 4.0 64-bit. i want to get this result "set mac=A4BADB9D1E8E" with python 2.6, who could help to me. thanks a lot! as follows: ipconfig -all|sed -nrf getmac.sed | sed -e "s/-//g" D:\LOG\WINMAC.BAT getmac.sed: /Realtek/ { n; s/.*: ([-0-9A-F]+)/set winmac=\1/p; } and "ipconfig -all" command log as bellows: ipconfig -all mac.log Ethernet adapter Ethernet: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : WKSCN.WISTRON Description . . . . . . . . . . . : Realtek PCIe FE Family Controller Physical Address. . . . . . . . . : 24-B6-FD-1F-41-E7 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes

  Read the article

• Learning Treetop

  - by cmartin

  I'm trying to teach myself Ruby's Treetop grammar generator. I am finding that not only is the documentation woefully sparse for the "best" one out there, but that it doesn't seem to work as intuitively as I'd hoped. On a high level, I'd really love a better tutorial than the on-site docs or the video, if there is one. On a lower level, here's a grammar I cannot get to work at all: grammar SimpleTest rule num (float / integer) end rule float ( (( '+' / '-')? plain_digits '.' plain_digits) / (( '+' / '-')? plain_digits ('E' / 'e') plain_digits ) / (( '+' / '-')? plain_digits '.') / (( '+' / '-')? '.' plain_digits) ) { def eval text_value.to_f end } end rule integer (( '+' / '-' )? plain_digits) { def eval text_value.to_i end } end rule plain_digits [0-9] [0-9]* end end When I load it and run some assertions in a very simple test object, I find: assert_equal @parser.parse('3.14').eval,3.14 Works fine, while assert_equal @parser.parse('3').eval,3 raises the error: NoMethodError: private method `eval' called for # If I reverse integer and float on the description, both integers and floats give me this error. I think this may be related to limited lookahead, but I cannot find any information in any of the docs to even cover the idea of evaluating in the "or" context A bit more info that may help. Here's pp information for both those parse() blocks. The float: SyntaxNode+Float4+Float0 offset=0, "3.14" (eval,plain_digits): SyntaxNode offset=0, "" SyntaxNode+PlainDigits0 offset=0, "3": SyntaxNode offset=0, "3" SyntaxNode offset=1, "" SyntaxNode offset=1, "." SyntaxNode+PlainDigits0 offset=2, "14": SyntaxNode offset=2, "1" SyntaxNode offset=3, "4": SyntaxNode offset=3, "4" The Integer... note that it seems to have been defined to follow the integer rule, but not caught the eval() method: SyntaxNode+Integer0 offset=0, "3" (plain_digits): SyntaxNode offset=0, "" SyntaxNode+PlainDigits0 offset=0, "3": SyntaxNode offset=0, "3" SyntaxNode offset=1, "" Update: I got my particular problem working, but I have no clue why: rule integer ( '+' / '-' )? plain_digits { def eval text_value.to_i end } end This makes no sense with the docs that are present, but just removing the extra parentheses made the match include the Integer1 class as well as Integer0. Integer1 is apparently the class holding the eval() method. I have no idea why this is the case. I'm still looking for more info about treetop.

  Read the article

• How do you unit test a unit test?

  - by FlySwat

  I was watching Rob Connerys webcasts on the MVCStoreFront App, and I noticed he was unit testing even the most mundane things, things like: public Decimal DiscountPrice { get { return this.Price - this.Discount; } } Would have a test like: [TestMethod] public void Test_DiscountPrice { Product p = new Product(); p.Price = 100; p.Discount = 20; Assert.IsEqual(p.DiscountPrice,80); } While, I am all for unit testing, I sometimes wonder if this form of test first development is really beneficial, for example, in a real process, you have 3-4 layers above your code (Business Request, Requirements Document, Architecture Document), where the actual defined business rule (Discount Price is Price - Discount) could be misdefined. If that's the situation, your unit test means nothing to you. Additionally, your unit test is another point of failure: [TestMethod] public void Test_DiscountPrice { Product p = new Product(); p.Price = 100; p.Discount = 20; Assert.IsEqual(p.DiscountPrice,90); } Now the test is flawed. Obviously in a simple test, it's no big deal, but say we were testing a complicated business rule. What do we gain here? Fast forward two years into the application's life, when maintenance developers are maintaining it. Now the business changes its rule, and the test breaks again, some rookie developer then fixes the test incorrectly...we now have another point of failure. All I see is more possible points of failure, with no real beneficial return, if the discount price is wrong, the test team will still find the issue, how did unit testing save any work? What am I missing here? Please teach me to love TDD, as I'm having a hard time accepting it as useful so far. I want too, because I want to stay progressive, but it just doesn't make sense to me. EDIT: A couple people keep mentioned that testing helps enforce the spec. It has been my experience that the spec has been wrong as well, more often than not, but maybe I'm doomed to work in an organization where the specs are written by people who shouldn't be writing specs.

  Read the article

• How to merge a "branch" that isn't really a branch (wasn't created by an svn copy)

  - by MatrixFrog

  I'm working on a team with lots of people who are pretty unfamiliar with the concepts of version control systems, and are just kind of doing whatever seems to work, by trial and error. Someone created a "branch" from the trunk that is not ancestrally related to the trunk. My guess is it went something like this: They created a folder in branches. They checked out all the code from the trunk to somewhere on their desktop. They added all that code to the newly created folder as though it was a bunch of brand new files. So the repository isn't aware that all that code is actually just a copy of the trunk. When I look at the history of that branch in TortoiseSVN, and uncheck the "Stop on copy/rename" box, there is no revision that has the trunk (or any other path) under the "Copy from path" column. Then they made lots of changes on their "branch". Meanwhile, others were making lots of changes on the trunk. We tried to do a merge and of course it doesn't work. Because, the trunk and the fake branch are not ancestrally related. I can see only two ways to resolve this: Go through the logs on the "branch", look at every change that was made, and manually apply each change to the trunk. Go through the logs on the trunk, look at every change that was made between revision 540 (when the "branch" was created) and HEAD, and manually apply each change to the "branch". This involves 7 revisions one way or 11 revisions the other way, so neither one is really that terrible. But is there any way to cause the repository to "realize" that the branch really IS ancestrally related even though it was created incorrectly, so that we can take advantage of the built-in merging functionality in Eclipse/TortoiseSVN? (You may be wondering: Why did your company hire these people and allow them to access the SVN repository without making sure they knew how to use it properly first?! We didn't -- this is a school assignment, which is a collaboration between two different classes -- the ones in the lower class were given a very quick hand-wavey "overview" of SVN which didn't really teach them anything. I've asked everyone in the group to please PLEASE read the svn book, and I'll make sure we (the slightly more experienced half of the team) keep a close eye on the repository to ensure this doesn't happen again.)

  Read the article

• Centos 5.5 [Read-only file system] issue after rebooting

  - by canu johann

  I have a virtual server under centos 5.5 (hosted by a japanese company called sakura ) Since yesterday, connection through ssh couldn't be established. I've contacted support center who told me to restart VS from the control panel. After restarting, I got the message below Connected to domain wwwxxxxxx.sakura.ne.jp Escape character is ^] [ OK ] Setting hostname localhost.localdomain: [ OK ] Setting up Logical Volume Management: No volume groups found [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda3 / contains a file system with errors, check forced. /: Inodes that were part of a corrupted orphan linked list found. /: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. (i.e., without -a or -p options) @@cat: /proc/self/attr/current: Invalid argument Welcome to CentOS Starting udev: @[ OK ] Setting hostname localhost.localdomain: [ OK ] Setting up Logical Volume Management: No volume groups found [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda3 / contains a file system with errors, check forced. /: Inodes that were part of a corrupted orphan linked list found. /: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. (i.e., without -a or -p options) [FAILED] *** An error occurred during the file system check. *** Dropping you to a shell; the system will reboot *** when you leave the shell. *** Warning -- SELinux is active *** Disabling security enforcement for system recovery. *** Run 'setenforce 1' to reenable. /etc/rc.d/rc.sysinit: line 53: /selinux/enforce: Read-only file system Give root password for maintenance (or type Control-D to continue): bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system (Repair filesystem) 1 # setenforce 1 setenforce: SELinux is disabled (Repair filesystem) 2 # echo 1 (Repair filesystem) 4 # /etc/init.d/sshd status openssh-daemon is stopped (Repair filesystem) 5 # /etc/init.d/sshd start Starting sshd: NET: Registered protocol family 10 lo: Disabled Privacy Extensions touch: cannot touch `/var/lock/subsys/sshd': Read-only file system (Repair filesystem) 6 # sudo /etc/init.d/sshd start sudo: sorry, you must have a tty to run sudo (Repair filesystem) 7 # I have 4 site in production and I need to restart the server quickly (SSH + HTTPD ,...). Thank you for your time.

  Read the article

• How to merge an improperly created "branch" that isn't really a branch (wasn't created by an svn cop

  - by MatrixFrog

  I'm working on a team with lots of people who are pretty unfamiliar with the concepts of version control systems, and are just kind of doing whatever seems to work, by trial and error. Someone created a "branch" from the trunk that is not ancestrally related to the trunk. My guess is it went something like this: They created a folder in branches. They checked out all the code from the trunk to somewhere on their desktop. They added all that code to the newly created folder as though it was a bunch of brand new files. So the repository isn't aware that all that code is actually just a copy of the trunk. When I look at the history of that branch in TortoiseSVN, and uncheck the "Stop on copy/rename" box, there is no revision that has the trunk (or any other path) under the "Copy from path" column. Then they made lots of changes on their "branch". Meanwhile, others were making lots of changes on the trunk. We tried to do a merge and of course it doesn't work. Because, the trunk and the fake branch are not ancestrally related. I can see only two ways to resolve this: Go through the logs on the "branch", look at every change that was made, and manually apply each change to the trunk. Go through the logs on the trunk, look at every change that was made between revision 540 (when the "branch" was created) and HEAD, and manually apply each change to the "branch". This involves 7 revisions one way or 11 revisions the other way, so neither one is really that terrible. But is there any way to cause the repository to "realize" that the branch really IS ancestrally related even though it was created incorrectly, so that we can take advantage of the built-in merging functionality in Eclipse/TortoiseSVN? (You may be wondering: Why did your company hire these people and allow them to access the SVN repository without making sure they knew how to use it properly first?! We didn't -- this is a school assignment, which is a collaboration between two different classes -- the ones in the lower class were given a very quick hand-wavey "overview" of SVN which didn't really teach them anything. I've asked everyone in the group to please PLEASE read the svn book, and I'll make sure we (the slightly more experienced half of the team) keep a close eye on the repository to ensure this doesn't happen again.)

  Read the article

• How to force Debian to boot new Kernel?

  - by ThE_-_BliZZarD

  I'm running Debian 6, Debian GNU/Linux, with Linux 2.6.32-5-amd64 under Grub2 ( 1.98+20100804-14+squeeze1) on a remote system (no possibility to view the pre-boot messages). I compiled and installed a new kernel, but I can not get it to boot. What I have done: Installed the packages via: dpkg -i linux-headers-3.5.3.20120914-amd64_3.5.3.20120914-amd64-10.00.Custom_amd64.deb linux-image-3.5.3.20120914-amd64_3.5.3.20120914-amd64-10.00.Custom_amd64.deb This updated the Grub configuration. My /boot/grub/grub.cfg now contains: menuentry 'Debian GNU/Linux, with Linux 3.5.3.20120914-amd64' --class debian --class gnu-linux --class gnu --class os { insmod raid insmod mdraid insmod part_msdos insmod part_msdos insmod ext2 set root='(md0)' search --no-floppy --fs-uuid --set 5a3882a9-c7df-4f6a-9feb-f03e3e37be01 echo 'Loading Linux 3.5.3.20120914-amd64 ...' linux /vmlinuz-3.5.3.20120914-amd64 root=UUID=003242b5-121b-49f3-b32f-1b40aea56eed ro acpi=ht quiet panic=10 echo 'Loading initial ramdisk ...' initrd /initrd.img-3.5.3.20120914-amd64 } menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-amd64' --class debian --class gnu-linux --class gnu --class os { insmod raid insmod mdraid insmod part_msdos insmod part_msdos insmod ext2 set root='(md0)' search --no-floppy --fs-uuid --set 5a3882a9-c7df-4f6a-9feb-f03e3e37be01 echo 'Loading Linux 2.6.32-5-amd64 ...' linux /vmlinuz-2.6.32-5-amd64 root=UUID=003242b5-121b-49f3-b32f-1b40aea56eed ro acpi=ht quiet panic=10 echo 'Loading initial ramdisk ...' initrd /initrd.img-2.6.32-5-amd64 } I used grub-set-default "Debian GNU/Linux, with Linux 2.6.32-5-amd64" to set the old kernel as default and then grub-reboot "Debian GNU/Linux, with Linux 3.5.3.20120914-amd64" to boot into the new kernel once. After update-grub I rebooted the system, but everytime it comes back up with the old kernel (2.6). I tried setting the new one as default (grub-set-default 0, update-grub, reboot) but, still the old one. The Syslogs contain NO hint whatsoever about trying to boot the new kernel - only the old one. Would there be any hints regarding problems with a kernel? Is there a way to enable debug-logging in grub? What am I doing wrong? How can I force the system to boot the new kernel? Edit: Hardware of remote machine. CPU cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 16 model : 5 model name : AMD Athlon(tm) II X4 605e Processor stepping : 3 cpu MHz : 2294.898 cache size : 512 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt bogomips : 4589.77 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm stc 100mhzsteps hwpstate (copied only the first, 3 more follow) The server is a Fujitsu PRIMERGY MX130 S1.

  Read the article

• Windows 8 ignores more specific route

  - by Lander

  OS: Windows 8 I have a cabled NIC (connected to router with ip 192.168.1.0) and a WIFI NIC (connected to a router with ip 192.168.1.1) . I want all traffic to go through the cabled NIC, except the 192.168.1.0/8 range should use the wifi-nic. This was working fine in Windows 7, without any manual configuration. In Windows 8 however, it's not. My routing table: =========================================================================== Interface List 14...f2 7b cb 13 e7 f0 ......Microsoft Wi-Fi Direct Virtual Adapter 13...b8 ac 6f 54 d2 5c ......Realtek PCIe FE Family Controller 12...f0 7b cb 13 e7 f0 ......Dell Wireless 1397 WLAN Mini-Card 1...........................Software Loopback Interface 1 15...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 16...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.198 30 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.233 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.0 On-link 192.168.0.233 276 192.168.0.233 255.255.255.255 On-link 192.168.0.233 276 192.168.0.255 255.255.255.255 On-link 192.168.0.233 276 192.168.1.0 255.255.255.0 192.168.1.1 192.168.1.198 31 192.168.1.198 255.255.255.255 On-link 192.168.1.198 286 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.0.233 276 224.0.0.0 240.0.0.0 On-link 192.168.1.198 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.0.233 276 255.255.255.255 255.255.255.255 On-link 192.168.1.198 286 =========================================================================== Persistent Routes: None I added the rule for 192.168.1.0. I would think Windows should use this rule for the IP 192.168.1.1 because it's more specific than the default-route. However it's not: C:\Windows\system32>tracert 192.168.1.1 Tracing route to 192.168.1.1 over a maximum of 30 hops 1 58 ms 4 ms 4 ms 192.168.0.1 2 68 ms 12 ms 11 ms ^C So... What do I do wrong? And how can I make Windows use the wireless NIC for 192.168.1.0/8

  Read the article

• Can GPU capabilities impact virtual machine performance?

  - by Dave White

  While this many not seem like a programming question directly, it impacts my development activities and so it seems like it belongs here. It seems that more and more developers are turning to virtual environments for development activities on their computers, SharePoint development being a prime example. Also, as a trainer, I have virtual training environments for all of the classes that I teach. I recently purchased a new Dell E6510 to travel around with. It has the i7 620M (Dual core, HyperThreaded cpu running at 2.66GHz) and 8 GB of memory. Reading the spec sheet, it sounded like it would be a great laptop to carry around and run virtual machines on. Getting the laptop though, I've been pretty disappointed with the user experience of developing in a virtual machine. Giving the Virtual Machine 4 GB of memory, it was slow and I could type complete sentences and watch the VM "catchup". My company has training laptops that we provide for our classes. They are Dell Precision M6400 Intel Core 2 Duo P8700 running at 2.54Ghz with 8 GB of memory and the experience on this laptops is night and day compared to the E6510. They are crisp and you barely aware that you are running in a virtual environment. Since the E6510 should be faster in all categories than the M6400, I couldn't understand why the new laptop was slower, so I did a component by component comparison and the only place where the E6510 is less performant than the M6400 is the graphics department. The M6400 is running a nVidia FX 2700m GPU and the E6510 is running a nVidia 3100M GPU. Looking at benchmarks of the two GPUs suggest that the FX 2700M is twice as fast as the 3100M. http://www.notebookcheck.net/Mobile-Graphics-Cards-Benchmark-List.844.0.html 3100M = 111th (E6510) FX 2700m = 47th (Precision M6400) Radeon HD 5870 = 8th (Alienware) The host OS is Windows 7 64bit as is the guest OS, running in Virtual Box 3.1.8 with Guest Additions installed on the guest. The IDE being used in the virtual environment is VS 2010 Premium. So after that long setup, my question is: Is the GPU significantly impacting the virtual machine's performance or are there other factors that I'm not looking at that I can use to boost the vm's performance? Do we now have to consider GPU performance when purchasing laptops where we expect to use virtualized development environments? Thanks in advance. Cheers, Dave

  Read the article

• Are there programs that iteratively write new programs?

  - by chris

  For about a year I have been thinking about writing a program that writes programs. This would primarily be a playful exercise that might teach me some new concepts. My inspiration came from negentropy and the ability for order to emerge from chaos and new chaos to arise out of order in infinite succession. To be more specific, the program would start by writing a short random string. If the string compiles the programs will log it for later comparison. If the string does not compile the program will try to rewrite it until it does compile. As more strings (mini 'useless' programs) are logged they can be parsed for similarities and used to generate a grammar. This grammar can then be drawn on to write more strings that have a higher probability of compilation than purely random strings. This is obviously more than a little silly, but I thought it would be fun to try and grow a program like this. And as a byproduct I get a bunch of unique programs that I can visualize and call art. I'll probably write this in Ruby due to its simple syntax and dynamic compilation and then I will visualize in processing using ruby-processing. What I would like to know is: Is there a name for this type of programming? What currently exists in this field? Who are the primary contributors? BONUS! - In what ways can I procedurally assign value to output programs beyond compiles(y/n)? I may want to extend the functionality of this program to generate a program based on parameters, but I want the program to define those parameters through running the programs that compile and assigning meaning to the programs output. This question is probably more involved than reasonable for a bonus, but if you can think of a simple way to get something like this done in less than 23 lines or one hyperlink, please toss it into your response. I know that this is not quite meta-programming and from the little I know of AI and generative algorithms they are usually more goal oriented than what I am thinking. What would be optimal is a program that continually rewrites and improves itself so I don't have to ^_^

  Read the article

• Poor performance of single processor 32bit Windows XP xompared SMP in VBA+Excel

  - by Adam Ryczkowski

  Welcome! On many computers I experienced poor performance of 32 bit guests running on 64 bit Linux host (I used only the Debian family). At last I managed to collect benchmark data. I made the benchmark by running custom VBA macro, (which we use in our company) that generates 284 pages long Word document full of Excel Pie charts, tables and comments. The macro is run as a single task (excluding the standard services) on a set of identically configured Windows XP 32-bit systems. I measured the time (in sec.) needed to perform the test. The computer (i.e. my notebook Asus P53E) supports both VT-d extensions and native Windows XP. It has 2-core processor, each core is hyperthreaded, so in total we have 4 mostly independent execution units. I use the latest VirtualBox 4.2 and VMWare Workstation 9.0 for Linux, installed together on the same host (running Mint 13 Maya) but never run simultaneously. The results (in column Time) are no less accurate than ± 10% Here are the results (sorry for the format, but I couldn't find out a better solution for tables in SO): +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ | Host software | # processor | Windows kernel | IO APIC | VT-x/AMD-V | 2D Video Accel | Time | +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 1 | 0 | 1139 | | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 1 | 1 | 1050 | | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 0 | 1 | 1644 | | VirtualBox | 4 | ACPI Multiprocessor PC | 1 | 1 | 1 | 6809 | | VMWare | 1 | ACPI Uniprocessor PC | | 1 | 1 | 1175 | | VMWare | 4 | ACPI Multiprocessor PC | | 1 | 1 | 3412 | | Native | 4 | ACPI Multiprocessor PC | | | | 1693 | | Native | 1 | Advanced Configuration and Power Interface (ACPI) PC | | | | 1170 | +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ Here are the striking conclusions: Although I've read in the VirtualBox fora about abysmal performance with 32-bit guest on 64-bit host, VMWare also has problems compared to native run, still being twice faster(!) than VBox. Although VBA is inherently single-threaded, the Excel calculations, which take much more than a half of total computation time, supposedly aren't. So one would expect some speed gain when running on 2+ cores ("+" for hyperthreading). What we see is a speed loss. And quite big one too. For the VirtualBox the VT-d extension isn't a big deal. Can anyone shed some light on why the singlethreaded Windows kernel is so much faster than the SMP one?

  Read the article

• Can't save screen resolution setting.

  - by Searock

  Hi, My screen resolution in windows and previous version of Ubuntu (9.04) was 1152 x 864. But in Ubuntu 10.04 it gives me an option of 1024 x 786 and 1360 x 786. I have some how managed to add 1152x684 resolution by using xrandr command. searock@searock-desktop:~$ cvt 1152 864 1152x864 59.96 Hz (CVT 1.00M3) hsync: 53.78 kHz; pclk: 81.75 MHz Modeline "1152x864_60.00" 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync searock@searock-desktop:~$ xrandr --newmode "1152x864_60.00" 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync searock@searock-desktop:~$ xrandr --addmode S-video 1152x864 xrandr: cannot find output "S-video" searock@searock-desktop:~$ xrandr Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1360x768 59.8 1024x768 60.0* 800x600 60.3 56.2 848x480 60.0 640x480 59.9 59.9 1152x864_60.00 (0x124) 81.0MHz h: width 1152 start 1216 end 1336 total 1520 skew 0 clock 53.3KHz v: height 864 start 867 end 871 total 897 clock 59.4Hz searock@searock-desktop:~$ xrandr --addmode VGA1 1152x864_60.00 But the problem is when ever I restart my computer I get this message. Could not apply the stored configuration for the monitors. Could not find a suitable configuration of screens. And then it comes back to 1024 x 786 My graphic card details : Intel(R) 82945G Express Chipset Family. Is there any way I can fix this once for all ? Thanks. Edit 1 : rumtscho has suggested me to modify xorg.conf file. But I am not sure what HorizSync means? is it Horizontal frequency ? My monitor model is Acer v173. Here's my specification. So what should be HorizSync and VertRefresh ? Edit 2 : I have edited my Xorg.conf file as follows : Section "Monitor" Identifier "Configured Monitor" HorizSync 30-80 VertRefresh 55-75 EndSection then I added the resolution and restarted my computer and still I am facing the same problem. Is there something that I am missing? Edit 3 : For now I have edited /etc/gdm/Init/Default(gdm startup scripts) to include following xrandr commands, just below line initctl -q emit login-session-start DISPLAY_MANAGER=gdm xrandr --newmode "1152x864_60.00" 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync xrandr --addmode VGA1 1152x864_60.00<br/> xrandr -s 1152x864_60.00 This has solved my problem, but this commands have increased my computer's boot time. I think I will have to edit xorg file properly. Edit 4 : Instead of adding this files to gdm startup scripts I have created a shell script and added it to startup (System - Preference - Startup Applications) #!/bin/bash xrandr --newmode "1152x864_60.00" 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync xrandr --addmode VGA1 1152x864_60.00 xrandr -s 1152x864_60.00 And don't forget to add execution rights. (Right Click - Properties - Permission - Allow executing file as program)

  Read the article

• Joining Windows 7 Professional to a Windows Server 2003 R2 x64 domain fails.

  - by Vinko Vrsalovic

  I have a windows 7 professional (spanish) laptop trying to join a Windows Server 2003 (english) domain. It detect correctly the SRV record, finding the proper domain controller, but then the join fails with the error message (snippet, because the error is in spanish) An Active Directory Domain Controller for This Domain Could Not be Contacted The DNS is correctly set, and client can ping by name and IP the server, the server can ping the client by IP. I've tested with the FW down to no avail. A host of other XP Pro clients are connected to the domain. I've restarted Net Logon and checked that Windows Time is up. Also the times are in sync between the server and the client. I'll put below diagnostics output. I'm wondering if there's anything special to be done on either the server or the client to have a Win 7 Pro join a 2k3 R2 domain. The following diagnostic information follows: netdiag /q for the DC dcdiag on the DC ipconfig /all on the Win 7 client netdiag /q on the DC: .................................. Computer Name: HI-X2 DNS Host Name: hi-x2.hi.local System info : Microsoft Windows Server 2003 R2 (Build 3790) Processor : EM64T Family 6 Model 23 Stepping 10, GenuineIntel List of installed hotfixes : KB923561 KB924667-v2 KB925398_WMP64 KB925902 KB926122 KB927891 KB929123 KB930178 KB932168 KB936357 KB938127 KB941569 KB942830 KB942831 KB943055 KB943460 KB944338-v2 KB944653 KB945553 KB946026 KB948496 KB950760 KB950762 KB950974 KB951066 KB951748 KB952004 KB952069 KB952954 KB954155 KB954550-v7 KB955069 KB955759 KB956572 KB956802 KB956803 KB956844 KB958469 KB958644 KB958869 KB959426 KB960225 KB960803 KB960859 KB961063 KB961118 KB961501 KB967715 KB967723 KB968389 KB968816 KB969059 KB969947 KB970238 KB970430 KB970483 KB971032 KB971468 KB971657 KB971737 KB971961 KB971961-IE8 KB972270 KB973037 KB973354 KB973507 KB973540 KB973687 KB973815 KB973825 KB973869 KB973904 KB973917-v2 KB974112 KB974318 KB974392 KB974571 KB975025 KB975467 KB975560 KB975713 KB976662-IE8 KB977290 KB977816 KB977914 KB978037 KB978262 KB978338 KB978542 KB978601 KB978706 KB979306 KB979309 KB979683 KB980182 KB980182-IE8 KB980232 KB980302-IE8 KB981332-IE8 KB981350 Q147222 Per interface results: Adapter : Local Area Connection Host Name. . . . . . . . . : hi-x2.hi.local IP Address . . . . . . . . : 10.0.1.199 Subnet Mask. . . . . . . . : 255.0.0.0 Default Gateway. . . . . . : 10.0.1.1 Dns Servers. . . . . . . . : 10.0.1.199 WINS service test. . . . . : Skipped Global results: [WARNING] You don't have a single interface with the 'WorkStation Service', 'Messenger Service', 'WINS' names defined. DNS test . . . . . . . . . . . . . : Passed PASS - All the DNS entries for DC are registered on DNS server '10.0.1.199'. IP Security test . . . . . . . . . : Skipped The command completed successfully dcdiag on the DC: Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\HI-X2 Starting test: Connectivity ......................... HI-X2 passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\HI-X2 Starting test: Replications ......................... HI-X2 passed test Replications Starting test: NCSecDesc ......................... HI-X2 passed test NCSecDesc Starting test: NetLogons ......................... HI-X2 passed test NetLogons Starting test: Advertising ......................... HI-X2 passed test Advertising Starting test: KnowsOfRoleHolders ......................... HI-X2 passed test KnowsOfRoleHolders Starting test: RidManager ......................... HI-X2 passed test RidManager Starting test: MachineAccount ......................... HI-X2 passed test MachineAccount Starting test: Services ......................... HI-X2 passed test Services Starting test: ObjectsReplicated ......................... HI-X2 passed test ObjectsReplicated Starting test: frssysvol ......................... HI-X2 passed test frssysvol Starting test: frsevent ......................... HI-X2 passed test frsevent Starting test: kccevent ......................... HI-X2 passed test kccevent Starting test: systemlog ......................... HI-X2 passed test systemlog Starting test: VerifyReferences ......................... HI-X2 passed test VerifyReferences Running partition tests on : ForestDnsZones Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Running partition tests on : DomainDnsZones Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : hi Starting test: CrossRefValidation ......................... hi passed test CrossRefValidation Starting test: CheckSDRefDom ......................... hi passed test CheckSDRefDom Running enterprise tests on : hi.local Starting test: Intersite ......................... hi.local passed test Intersite Starting test: FsmoCheck ......................... hi.local passed test FsmoCheck ipconfig /all on the Windows 7 client: Configuraci¢n IP de Windows Nombre de host. . . . . . . . . : hi-p6 Sufijo DNS principal . . . . . : Tipo de nodo. . . . . . . . . . : h¡brido Enrutamiento IP habilitado. . . : no Proxy WINS habilitado . . . . . : no Adaptador de LAN inal mbrica Conexi¢n de red inal mbrica: Sufijo DNS espec¡fico para la conexi¢n. . : Descripci¢n . . . . . . . . . . . . . . . : Intel(R) WiFi Link 5100 AGN Direcci¢n f¡sica. . . . . . . . . . . . . : 00-22-FB-63-47-A0 DHCP habilitado . . . . . . . . . . . . . : no Configuraci¢n autom tica habilitada . . . : s¡ Direcci¢n IPv4. . . . . . . . . . . . . . : 10.0.1.42(Preferido) M scara de subred . . . . . . . . . . . . : 255.255.255.0 Puerta de enlace predeterminada . . . . . : 10.0.1.1 Servidores DNS. . . . . . . . . . . . . . : 10.0.1.199 NetBIOS sobre TCP/IP. . . . . . . . . . . : habilitado Adaptador de Ethernet Conexi¢n de  rea local: Estado de los medios. . . . . . . . . . . : medios desconectados Sufijo DNS espec¡fico para la conexi¢n. . : Descripci¢n . . . . . . . . . . . . . . . : Realtek PCIe GBE Family Controller Direcci¢n f¡sica. . . . . . . . . . . . . : 00-1E-33-1F-35-B1 DHCP habilitado . . . . . . . . . . . . . : s¡ Configuraci¢n autom tica habilitada . . . : s¡ Adaptador de t£nel isatap.{8926581E-09AC-4123-906B-DA6386AD2D60}: Estado de los medios. . . . . . . . . . . : medios desconectados Sufijo DNS espec¡fico para la conexi¢n. . : Descripci¢n . . . . . . . . . . . . . . . : Adaptador ISATAP de Microsoft Direcci¢n f¡sica. . . . . . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP habilitado . . . . . . . . . . . . . : no Configuraci¢n autom tica habilitada . . . : s¡ Adaptador de t£nel Teredo Tunneling Pseudo-Interface: Sufijo DNS espec¡fico para la conexi¢n. . : Descripci¢n . . . . . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Direcci¢n f¡sica. . . . . . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP habilitado . . . . . . . . . . . . . : no Configuraci¢n autom tica habilitada . . . : s¡ Direcci¢n IPv6 . . . . . . . . . . : 2001:0:5ef5:73ba:1cec:3883:f5ff:fed5(Preferido) V¡nculo: direcci¢n IPv6 local. . . : fe80::1cec:3883:f5ff:fed5%13(Preferido) Puerta de enlace predeterminada . . . . . : :: NetBIOS sobre TCP/IP. . . . . . . . . . . : deshabilitado

  Read the article

• lshw tells me my processor is a 64 bits but my motherboard has a 32 bits width

  - by bpetit

  Recently I noticed lshw tells me a strange thing. Here is the first part of my lshw output: bpetit-1025c description: Notebook product: 1025C (1025C) vendor: ASUSTeK COMPUTER INC. version: x.x serial: C3OAAS000774 width: 32 bits capabilities: smbios-2.7 dmi-2.7 smp-1.4 smp configuration: boot=normal chassis=notebook cpus=2 family=Eee PC... *-core description: Motherboard product: 1025C vendor: ASUSTeK COMPUTER INC. physical id: 0 version: x.xx serial: EeePC-0123456789 slot: To be filled by O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 1025C.0701 date: 01/06/2012 size: 64KiB capacity: 1984KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd... *-cpu:0 description: CPU product: Intel(R) Atom(TM) CPU N2800 @ 1.86GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 slot: CPU 1 size: 798MHz capacity: 1865MHz width: 64 bits clock: 533MHz capabilities: x86-64 boot fpu fpu_exception wp vme de pse tsc ... configuration: cores=2 enabledcores=1 id=2 threads=2 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 24KiB capacity: 24KiB capabilities: internal write-back unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 512KiB capacity: 512KiB capabilities: internal varies unified *-logicalcpu:0 description: Logical CPU physical id: 2.1 width: 64 bits capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 width: 64 bits capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 width: 64 bits capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 width: 64 bits capabilities: logical *-memory description: System Memory physical id: 13 slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM [empty] product: [Empty] vendor: [Empty] physical id: 0 serial: [Empty] slot: DIMM0 *-bank:1 description: SODIMM DDR3 Synchronous 1066 MHz (0.9 ns) product: SSZ3128M8-EAEEF vendor: Xicor physical id: 1 serial: 00000004 slot: DIMM1 size: 2GiB width: 64 bits clock: 1066MHz (0.9ns) *-cpu:1 physical id: 1 bus info: cpu@1 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 size: 798MHz capacity: 798MHz capabilities: ht cpufreq configuration: id=2 *-logicalcpu:0 description: Logical CPU physical id: 2.1 capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 capabilities: logical So here I see my processor is effectively a 64 bits one. However, I'm wondering how my motherboard can have a "32 bits width". I've browsed the web to find an answer, without success. I imagine it's just a technical fact that I don't know about. Thanks.

  Read the article

• Rails Tutorial Chapter 4 2nd Ed. Title Helper not being called with out argument.

  - by SuddenlyAwakened

  I am running through the Rails Tutorial by Michael Hartl (Screen Cast). Ran into the and issue in chapter 4 on the title helper. I have been putting my own twist on the code as I go to make sure I understand it all. However on this one I it is very similar and I am not quite sure why it is acting the way it is. Here is the code: Application.html.erb <!DOCTYPE html> <html> <head> <%- Rails.logger.info("Testing: #{yield(:title)}") %> <title><%= full_title(yield(:title)) %></title> <%= stylesheet_link_tag "application", :media => "all" %> <%= javascript_include_tag "application" %> <%= csrf_meta_tags %> </head> <body> <%= yield %> </body> </html> Application_helper.rb module ApplicationHelper def full_title(page_title) full_title = "Ruby on Rails Tutorial App" full_title += " | #{page_title}" unless page_title.blank? end end Home.html.erb <h1><%= t(:sample_app) %></h1> <p> This is the home page for the <a href="http://railstutorial.org/">Ruby on Rails Tutorial</a> sample application </p> about.html.erb <% provide(:title, t(:about_us)) %> <h1><%= t(:about_us) %></h1> <p> The <a href="http://railstutorial.org/">Ruby on Rails Tutorial</a> is a project to make a book and screencast to teach web development with <a href="http://railstutorial.org/">Ruby on Rails</a>. This is the sample application for the tutorial. </p> What Happens: The code works fine when I set the provide method like on the about page. However when I do not it does not seem to even call the helper. I am assuming that because no title is passed back. Any ideas on what I am doing wrong? Thank you all for your help.

  Read the article

• Anti-virus protection question?

  - by DaBaer

  About 4 years ago, I found Kaspersky and have been using the most current version since. Most people try and argue the use of AVG or Avast to me, and there are some very solid reasons I do not go that route. Over the years, I have found Kasp to become bulkier and bulkier, and have had issues setting it up for friends/family/clients. I am just curios on possible recommendations from other users, with my criteria in mind: What I like about Kasp in the past: The license sold in stores in a 3 pack, is considered a commercial license, and emails from Kasp in response to my questions, make it clear that I can do with the 3 licenses that I want, providing I do not use more than 3 installs per Key. So, allowed me to buy 3, 5, and 7 packs, and resell to users at a cheaper cost than what they would pay if they bought their own license. The ability to easily obtain a currently updated .exe for installation on multiple peoples machines. Power of the scan. Kasp has been a good solution for me (even when using a trial license) on cleaning up machines that were badly infected (in which AVG and AVAST were unable to.) Speed of install/update. After a cleanup of malwarebytes, spybot, mcafee stinger, ccleaner, and combofix, I used to be able to get Kasp Int Security installed and updated in around 5 minutes. The issues that I have with the free AV, is strength of protection. In my opinion for someone who is a 'power use' these are good alternatives, because such a user should be trained or knowledgeable enough to be careful and not get themselves in trouble. Most of the users I assist, are too PC ignorant to know any better, and go hogwild on the web. It has been my experience that the number of people coming back to me with spyware/malware/virus issues since I have converted from AVG to Kasp has been cut down to around 20% of what it used to be 4 or 5 years ago. In a perfect world, I could install and use Kasp Internet Security 2008, and be very happy. But this is not the case anymore. So after this long description of what I used, and have used, does anyone have any good recommendations on AV that isn't going to cost me too much per install?

  Read the article

• Computer suddenly dies; screen displays weird flickering lines, then restarts

  - by Imray

  I've been having this terrible problem for a little while and just managed to get a picture of 'dead screen' for the first time and I am posting it to seek help. Randomly, at irregular intervals (typically once a week), while working on something (it's been different things every time) my computer will just suddenly go dead - the screen turns to exactly the picture below (the lines flicker a little bit), it hangs there for a few seconds and then restarts. Obviously this is extremely frustrating and I want to try to stop it. I've searched numerous postings with similar keywords but nothing exactly the same as mine. Does anyone have any idea what might be the cause of this? I would post all my system settings and installed programs but the list is long and I don't know how much relevance each item would be. If you'd like to know something specific, please comment and I'll let you know whatever you need. SPECS C:\Users\Imray>systeminfo Host Name: Imray OS Name: Microsoft Windows 7 Professional OS Version: 6.1.7600 N/A Build 7600 OS Manufacturer: Microsoft Corporation OS Configuration: Standalone Workstation OS Build Type: Multiprocessor Free Registered Owner: Imray - Owner Registered Organization: Product ID: 00371-152-9333854-85895 Original Install Date: 06/09/1999, 5:45:21 PM System Boot Time: 22/03/2013, 8:58:18 AM System Manufacturer: Gateway System Model: DX4840 System Type: x64-based PC Processor(s): 1 Processor(s) Installed. [01]: Intel64 Family 6 Model 37 Stepping 2 GenuineIntel ~3201 Mhz BIOS Version: American Megatrends Inc. P01-A3 , 17/05/2010 Windows Directory: C:\Windows System Directory: C:\Windows\system32 Boot Device: \Device\HarddiskVolume2 System Locale: en-us;English (United States) Input Locale: en-us;English (United States) Time Zone: (UTC-05:00) Eastern Time (US & Canada) Total Physical Memory: 6,135 MB Available Physical Memory: 3,632 MB Virtual Memory: Max Size: 12,268 MB Virtual Memory: Available: 8,114 MB Virtual Memory: In Use: 4,154 MB Page File Location(s): C:\pagefile.sys Domain: WORKGROUP Logon Server: \\Imray-OWNER Hotfix(s): 4 Hotfix(s) Installed. [01]: KB971033 [02]: KB958559 [03]: KB977206 [04]: KB981889 Network Card(s): 2 NIC(s) Installed. [01]: 802.11n Wireless PCI Express Card LAN Adapter Connection Name: Wireless Network Connection DHCP Enabled: Yes DHCP Server: 192.168.2.1 IP address(es) [01]: 192.168.2.13 [02]: fe80::1df1:5399:6890:91f6 [02]: Microsoft Virtual WiFi Miniport Adapter Connection Name: Wireless Network Connection 2 DHCP Enabled: Yes DHCP Server: N/A IP address(es) Graphics Card Specs Name ATI Radeon HD 5570 PNP Device ID PCI\VEN_1002&DEV_68D9&SUBSYS_E142174B&REV_00\4&18A4B35E&0&0008 Adapter Type ATI display adapter (0x68D9), ATI Technologies Inc. compatible Adapter Description ATI Radeon HD 5570 Adapter RAM 1.00 GB (1,073,741,824 bytes) Installed Drivers atiu9p64 aticfx64 aticfx64 atiu9pag aticfx32 aticfx32 atiumd64 atidxx64 atidxx64 atiumdag atidxx32 atidxx32 atiumdva atiumd6a atitmm64 Driver Version 8.700.0.0 INF File oem1.inf (ati2mtag_Evergreen section) Color Planes Not Available Color Table Entries 4294967296 Resolution 1920 x 1080 x 59 hertz Bits/Pixel 32 Memory Address 0xD0000000-0xDFFFFFFF Memory Address 0xFBDE0000-0xFBDFFFFF I/O Port 0x0000D000-0x0000DFFF IRQ Channel IRQ 4294967293 I/O Port 0x000003B0-0x000003BB I/O Port 0x000003C0-0x000003DF Memory Address 0xA0000-0xBFFFF Driver c:\windows\system32\drivers\atikmpag.sys (8.14.1.6095, 181.00 KB (185,344 bytes), 06/09/1999 5:59 PM)

  Read the article

< Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >