Search Results

Search found 11070 results on 443 pages for 'bin deployment'.

Page 134/443 | < Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >

  • Removing old kernel entries in Grub

    - by To Do
    I regularly delete old kernels leaving only the latest two entries using Synaptic. I'm using Precise. However in my Grub "previous Linux version" menu there are quite a few entries labelled 2.6.8. I cannot find these linux-images in Synaptic. dpkg -l | grep linux-image Gives: rc linux-image-3.0.0-17-generic 3.0.0-17.30 Linux kernel image for version 3.0.0 on x86/x86_64 ii linux-image-3.2.0-27-generic 3.2.0-27.43 Linux kernel image for version 3.2.0 on 32 bit x86 SMP ii linux-image-3.2.0-29-generic 3.2.0-29.46 Linux kernel image for version 3.2.0 on 32 bit x86 SMP ii linux-image-3.4.0-030400-generic 3.4.0-030400.201205210521 Linux kernel image for version 3.4.0 on 32 bit x86 SMP ii linux-image-generic 3.2.0.29.31 Generic Linux kernel image Sudo update-grub gives: Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.4.0-030400-generic Found initrd image: /boot/initrd.img-3.4.0-030400-generic Found linux image: /boot/vmlinuz-3.2.0-29-generic Found initrd image: /boot/initrd.img-3.2.0-29-generic Found linux image: /boot/vmlinuz-3.2.0-27-generic Found initrd image: /boot/initrd.img-3.2.0-27-generic Found linux image: /boot/vmlinuz-2.6.38-11-generic Found initrd image: /boot/initrd.img-2.6.38-11-generic Found linux image: /boot/vmlinuz-2.6.38-10-generic Found initrd image: /boot/initrd.img-2.6.38-10-generic Found linux image: /boot/vmlinuz-2.6.38-8-generic Found initrd image: /boot/initrd.img-2.6.38-8-generic Found memtest86+ image: /boot/memtest86+.bin Found Windows Vista (loader) on /dev/sda1 sudo apt-get remove linux-image-2.6.8-8-generic gives: E: Unable to locate package linux-image-2.6.8-8-generic E: Couldn't find any package by regex 'linux-image-2.6.8-8-generic' My boot folder contains the following: abi-2.6.38-10-generic initrd.img-3.4.0-030400-generic abi-2.6.38-11-generic memtest86+.bin abi-2.6.38-8-generic memtest86+_multiboot.bin abi-3.2.0-27-generic System.map-2.6.38-10-generic abi-3.2.0-29-generic System.map-2.6.38-11-generic abi-3.4.0-030400-generic System.map-2.6.38-8-generic config-2.6.38-10-generic System.map-3.2.0-27-generic config-2.6.38-11-generic System.map-3.2.0-29-generic config-2.6.38-8-generic System.map-3.4.0-030400-generic config-3.2.0-27-generic vmcoreinfo-2.6.38-10-generic config-3.2.0-29-generic vmcoreinfo-2.6.38-11-generic config-3.4.0-030400-generic vmcoreinfo-2.6.38-8-generic extlinux vmlinuz-2.6.38-10-generic grub vmlinuz-2.6.38-11-generic initrd.img-2.6.38-10-generic vmlinuz-2.6.38-8-generic initrd.img-2.6.38-11-generic vmlinuz-3.2.0-27-generic initrd.img-2.6.38-8-generic vmlinuz-3.2.0-29-generic initrd.img-3.2.0-27-generic vmlinuz-3.4.0-030400-generic initrd.img-3.2.0-29-generic and ls -l /etc/grub.d yields: total 56 -rwxr-xr-x 1 root root 6715 Apr 17 20:16 00_header -rwxr-xr-x 1 root root 5522 Oct 1 2011 05_debian_theme -rwxr-xr-x 1 root root 7407 May 17 09:22 10_linux -rwxr-xr-x 1 root root 6335 Apr 17 20:16 20_linux_xen -rwxr-xr-x 1 root root 1588 May 3 2011 20_memtest86+ -rwxr-xr-x 1 root root 7603 Apr 17 20:16 30_os-prober -rwxr-xr-x 1 root root 214 Oct 1 2011 40_custom -rwxr-xr-x 1 root root 95 Oct 1 2011 41_custom -rw-r--r-- 1 root root 483 Oct 1 2011 README gdisk -l /dev/sda yields: Partition table scan: MBR: MBR only BSD: not present APM: not present GPT: not present *************************************************************** Found invalid GPT and valid MBR; converting MBR to GPT format. *************************************************************** Disk /dev/sda: 312581808 sectors, 149.1 GiB Logical sector size: 512 bytes Disk identifier (GUID): F832A498-05E1-4615-B5B1-757ACB4A757A Partition table holds up to 128 entries First usable sector is 34, last usable sector is 312581774 Partitions will be aligned on 2048-sector boundaries Total free space is 4183661 sectors (2.0 GiB) Number Start (sector) End (sector) Size Code Name 1 2048 61442047 29.3 GiB 0700 Microsoft basic data 3 163842048 169986047 2.9 GiB 8200 Linux swap 4 169986048 312578047 68.0 GiB 0700 Microsoft basic data 5 61444096 159666175 46.8 GiB 8300 Linux filesystem Please help with removing the old and inexistent kernels from Grub.

    Read the article

  • Bash completion doesn't work, or is ignoring what I've typed; but works for commands

    - by Neil Traft
    Bash completion seems to be ignoring what I've typed (it tries to complete, but acts as if there's nothing under the cursor). I know I saw it work on this machine earlier today, but I'm not sure what has changed. Some examples: cd shows all directories under my current folder: $ cd co<tab><tab> cmake/ config/ doc/ examples/ include/ programs/ sandbox/ src/ .svn/ tests/ Commands like ls and less show all files and directories under my current folder: $ ls co<tab><tab> cmake/ config/ .cproject Doxyfile.in include/ programs/ README.txt src/ tests/ CMakeLists.txt COPYING.txt doc/ examples/ mainpage.dox .project sandbox/ .svn/ Even when I try to complete things from a different folder, it gives me only the results for my current folder (telling me that it is completely ignoring what I've typed): $ cd ~/D<tab><tab> cmake/ config/ doc/ examples/ include/ programs/ sandbox/ src/ .svn/ tests/ But it seems to be working fine for commands and variables: $ if<tab><tab> if ifconfig ifdown ifnames ifquery ifup $ echo $P<tab><tab> $PATH $PIPESTATUS $PPID $PS1 $PS2 $PS4 $PWD $PYTHONPATH I do have this bit in my .bashrc, and I have confirmed that my .bashrc is indeed getting sourced: if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi I've even tried manually executing that file, but it doesn't fix the problem: $ . /etc/bash_completion There was even one point in time where it was working for ls, but was not working for cd ... but I can't replicate that result now. Update: I also just discovered that I have terminals open from earlier that still work. I ran source .bashrc in one of them and afterwards completion was broken. Here is my .bashrc: # ~/.bashrc: executed by bash(1) for non-login shells. # see /usr/share/doc/bash/examples/startup-files (in the package bash-doc) # for examples # # Modified by Neil Traft #source ~/.profile # Allow globs to expand hidden files shopt -s dotglob nullglob # If not running interactively, don't do anything [ -z "$PS1" ] && return # don't put duplicate lines or lines starting with space in the history. # See bash(1) for more options HISTCONTROL=ignoreboth # append to the history file, don't overwrite it shopt -s histappend # for setting history length see HISTSIZE and HISTFILESIZE in bash(1) HISTSIZE=1000 HISTFILESIZE=2000 # check the window size after each command and, if necessary, # update the values of LINES and COLUMNS. shopt -s checkwinsize # If set, the pattern "**" used in a pathname expansion context will # match all files and zero or more directories and subdirectories. #shopt -s globstar # make less more friendly for non-text input files, see lesspipe(1) [ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)" # set variable identifying the chroot you work in (used in the prompt below) if [ -z "$debian_chroot" ] && [ -r /etc/debian_chroot ]; then debian_chroot=$(cat /etc/debian_chroot) fi # Color the prompt export PS1="\[$(tput setaf 2)\]\u@\h:\[$(tput setaf 5)\]\W\[$(tput setaf 2)\] $\[$(tput sgr0)\] " # enable color support of ls and also add handy aliases if [ -x /usr/bin/dircolors ]; then test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)" alias ls='ls --color=auto' #alias dir='dir --color=auto' #alias vdir='vdir --color=auto' alias grep='grep --color=auto' alias fgrep='fgrep --color=auto' alias egrep='egrep --color=auto' fi # Add an "alert" alias for long running commands. Use like so: # sleep 10; alert alias alert='notify-send --urgency=low -i "$([ $? = 0 ] && echo terminal || echo error)" "$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&|]\s*alert$//'\'')"' # Alias definitions. # You may want to put all your additions into a separate file like # ~/.bash_aliases, instead of adding them here directly. # See /usr/share/doc/bash-doc/examples in the bash-doc package. if [ -f ~/.bash_aliases ]; then . ~/.bash_aliases fi # enable programmable completion features (you don't need to enable # this, if it's already enabled in /etc/bash.bashrc and /etc/profile # sources /etc/bash.bashrc). if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi

    Read the article

  • Start fail VMware-Player 3.1.5 on Ubuntu 12.04 32bit

    - by Chris Lee
    Install got no problem but at start of VMWare Player it want to compile and exit with this error: "Unable to build kernel module." Thats the log: Jun 05 00:03:36.153: app-3075712704| Log for VMware Workstation pid=3709 version=7.1.5 build=build-491717 option=Release Jun 05 00:03:36.153: app-3075712704| The process is 32-bit. Jun 05 00:03:36.153: app-3075712704| Host codepage=UTF-8 encoding=UTF-8 Jun 05 00:03:36.153: app-3075712704| Logging to /tmp/vmware-root/setup-3709.log Jun 05 00:03:36.284: app-3075712704| modconf query interface initialized Jun 05 00:03:36.284: app-3075712704| modconf library initialized Jun 05 00:03:36.336: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:36.350: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:36.371: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:36.417: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:36.429: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:36.521: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.526: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.529: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.533: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.536: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.579: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.583: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.586: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.589: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.593: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:36.602: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:36.624: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:39.677: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.689: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.694: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.697: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.701: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.711: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:39.733: app-3075712704| Your GCC version: 4.6 Jun 05 00:03:39.854: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.858: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.862: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.865: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:39.868: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:40.065: app-3075712704| Trying to find a suitable PBM set for kernel 3.2.0-24-generic-pae. Jun 05 00:03:40.066: app-3075712704| Building module vmmon. Jun 05 00:03:40.066: app-3075712704| Extracting the sources of the vmmon module. Jun 05 00:03:40.075: app-3075712704| Building module with command: /usr/bin/make -C /tmp/vmware-root/modules/vmmon-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-24-generic-pae/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 Jun 05 00:03:42.016: app-3075712704| Failed to compile module vmmon! Is it a gcc problem ?

    Read the article

  • GoldenGate 12c - MySQL Active-Active Replication Setup

    - by Jinyu Wang-Oracle
    Active-active  (also called Master-Master or Bi-Directional) replication captures data changes from two or more systems and replicat the changes to synchronize the data.  Active-Active replication is often needed for high availability, load balancing and scaling out purposes.   Oracle GoldenGate is known to be one of the first and the best replication tool handling active-active replications. As of Oracle GoldenGate 12c, it provides (Refer to Oracle GoldenGate 12.1.2 Documentation - Configuring Oracle GoldenGate for Active-Active High Availability for more information) the followings: Robust loop-back prevention Comprehensive conflict resolution and detection support Heterogeneous support across different database versions and operation systems.  Oracle GoldenGate supports active-active configurations for DB2 on z/OS, LUW, and IBM i, MySQL, Oracle, SQL/MX,SQL Server, Sybase, and Teradata. However, the setup is different from database to database. In this example, I will show you how to setup an active-active data replication between two MySQL database instances. The example setup below is to have active-active replication between MySQL 5.5 and MySQL 5.6 instances and is shown as follows: MySQL 5.5 (Manager Port: 15105)  Extract EXTRACT demoex01 SETENV (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.5.38/data/mysql.sock') DBOPTIONS CONNECTIONPORT 3305 DBOPTIONS HOST oraclelinux6.localdomain SOURCEDB test USERID root, PASSWORD mysql EXTTRAIL ./dirdat/extract/de TRANLOGOPTIONS ALTLOGDEST "/home/oracle/software/mysql_5.5.38/data/binlog/bin-log.index" FILTERTABLE test.checkpoint_tbl REPORTROLLOVER AT 05:30 ON saturday TABLE test.TCUSTMER; TABLE test.TCUSTORD; Pump EXTRACT demopm01 RMTHOST localhost, MGRPORT 15106, COMPRESS, TIMEOUT 30 RMTTRAIL ./dirdat/replicat/ps PASSTHRU TABLE test.TCUSTMER; TABLE test.TCUSTORD; Replicat replicat demorp01 setenv (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.5.38/data/mysql.sock') dboptions host oraclelinux6.localdomain, connectionport 3305 targetdb test, userid root, password mysql sourcedefs ./dirdat/replicat/democust.def discardfile ./dirrpt/demprp01.dsc, purge REPERROR (DEFAULT, ABEND) REPERROR(1062, IGNORE) map test.TCUSTMER, target test.TCUSTMER,colmap(usedefaults, region_code="region code"); map test.TCUSTORD, target test.TCUSTORD; MySQL 5.6 (Manager Port: 15106) Replicat replicat demorp01 setenv (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.6.19/data/mysql.sock') dboptions host oraclelinux6.localdomain, connectionport 3306 targetdb test, userid root, password mysql --assumetargetdefs sourcedefs ./dirdat/replicat/democust.def discardfile ./dirrpt/demprp01.dsc, purge map test.TCUSTMER, target test.TCUSTMER, colmap(usedefaults, "region code"=region_code); map test.TCUSTORD, target test.TCUSTORD; Extract EXTRACT demoex01 SETENV (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.6.19/data/mysql.sock') DBOPTIONS CONNECTIONPORT 3306 DBOPTIONS HOST oraclelinux6.localdomain SOURCEDB test USERID root, USERID mysql EXTTRAIL ./dirdat/extract/de TRANLOGOPTIONS ALTLOGDEST "/usr/local/mysql56/data/binlog/bin-log.index" FILTERTABLE test.checkpoint_tbl TABLE test.TCUSTMER; TABLE test.TCUSTORD; Pump EXTRACT demopm01 RMTHOST localhost, MGRPORT 15105, COMPRESS, TIMEOUT 30 RMTTRAIL ./dirdat/replicat/ps PASSTHRU TABLE test.TCUSTMER; TABLE test.TCUSTORD; The setup parameters are quite self-explanatory. The key setup is to avoid the replication data  looping. Oracle GoldenGate for MySQL uses the information in the replication checkpoint table to identify the transaction applied by replicats and thus avoid extracting those transactions by Oracle GoldenGate extracts. The example setup in the extract in MySQL 5.5 instance is shown as follows.  TRANLOGOPTIONS ALTLOGDEST "/home/oracle/software/mysql_5.5.38/data/binlog/bin-log.index" FILTERTABLE test.checkpoint_tbl Setting up an active-active replication is often more complicated than this and requires the following additional considerations. I would elaborate on this in the follow-up discussions. 

    Read the article

  • Migrating a WebLogic Domain from a 32 to a 64 bit JVM/Architecture

    - by adejuanc
    Currently on 32 bit OS which presents a physical constraint when trying to allocate memory. By limit, a 32 bit OS, will not be able to allocate more than 3 GB on a Linux environment, or 2 GB for Windows environment (not considering Physical Address Extension (PAE) implementation, which can increase the maximum allocatable memory). When this limit is reached, a migration to a 64 bit architecture is recommended. Below are the steps on how to install a 64 WebLogic Server version, along with a 64 Bit JVM and then how to migrate the domain to this new environment. Weblogic Server Version: WebLogic Server Version: 10.3.4.0 OS: Linux adejuan-cl.cl.oracle.com 2.6.18-194.el5 #1 SMP Mon Jan 01 22:10:29 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux JVM:java version "1.6.0_22" Java(TM) SE Runtime Environment (build 1.6.0_22-b04) Oracle JRockit(R) (build R28.1.1-13-139783-1.6.0_22-20101206-0136-linux-x86_64, compiled mode) To create migration template: 1. Execute $<WLS_HOME>/wlserver_10.3/common/bin/config_builder.sh 2. Create Domain Template. 3. Select Domain to migrate. 4. Enter the name of template and other info. Click next. 5. Using Add Button, Select libraries you want to add under lib folder. copy jdbc data sources you would like to have under config/jdbc folder. If you want to have log4j configuration, copy log4j.xml under domain_root folder. 6. Select data base for the domain and click next. 7. Enter Admin Server Name and port numbers. Click next. 8. Enter username and password. Click next. Select No if you don want to add users/groups/roles 9. Click next until reach button create. This will create a jar file that is needed for the next action plan. To install and migrate domain to 64 bit architecture. 1. Install JVM Jrockit R28.1.1.13 on environment. (uncompress zip folder on a known location) 2. Go to JRockit_Home/bin and execute $ java -d64 -jar wls1034_generic.jar 3. When prompt, select JRockit JVM in browse menu, and wait for installation to finish. 4. Go to <WLS_HOME>/wlserver_10.3/common/bin and execute $ ./config.sh 5. Select Create a new Weblogic domain 6. Select Base this domain on an existing template and select browse. 7. Select jar file created on previous action plan. 8. Select Name of domain. Maintain in most cases. 9. Select user name and password. Maintain in most cases. 10. Select Jrockit SDK 1.6.0_22 and click next. 11. Confirm all JMS/JDBC/security configuration. 12. On select Optional Configuration, reconfigure if necessary. 13. Check on Configuration summary for all domain configuration. 14. Click on create, to finish up domain import. Note: Always when installing a 64 bit WLS, it's necessary to install first the 64 JVM and then run the generic installer with the -d64 bit option. If this is not performed, the installation will be the 32 default version. For more information, please refer: http://download.oracle.com/docs/cd/E13188_01/jrockit/docs50/dev_faq.html#pae

    Read the article

  • What's New in ASP.NET 4

    - by Navaneeth
    The .NET Framework version 4 includes enhancements for ASP.NET 4 in targeted areas. Visual Studio 2010 and Microsoft Visual Web Developer Express also include enhancements and new features for improved Web development. This document provides an overview of many of the new features that are included in the upcoming release. This topic contains the following sections: ASP.NET Core Services ASP.NET Web Forms ASP.NET MVC Dynamic Data ASP.NET Chart Control Visual Web Developer Enhancements Web Application Deployment with Visual Studio 2010 Enhancements to ASP.NET Multi-Targeting ASP.NET Core Services ASP.NET 4 introduces many features that improve core ASP.NET services such as output caching and session state storage. Extensible Output Caching Since the time that ASP.NET 1.0 was released, output caching has enabled developers to store the generated output of pages, controls, and HTTP responses in memory. On subsequent Web requests, ASP.NET can serve content more quickly by retrieving the generated output from memory instead of regenerating the output from scratch. However, this approach has a limitation — generated content always has to be stored in memory. On servers that experience heavy traffic, the memory requirements for output caching can compete with memory requirements for other parts of a Web application. ASP.NET 4 adds extensibility to output caching that enables you to configure one or more custom output-cache providers. Output-cache providers can use any storage mechanism to persist HTML content. These storage options can include local or remote disks, cloud storage, and distributed cache engines. Output-cache provider extensibility in ASP.NET 4 lets you design more aggressive and more intelligent output-caching strategies for Web sites. For example, you can create an output-cache provider that caches the "Top 10" pages of a site in memory, while caching pages that get lower traffic on disk. Alternatively, you can cache every vary-by combination for a rendered page, but use a distributed cache so that the memory consumption is offloaded from front-end Web servers. You create a custom output-cache provider as a class that derives from the OutputCacheProvider type. You can then configure the provider in the Web.config file by using the new providers subsection of the outputCache element For more information and for examples that show how to configure the output cache, see outputCache Element for caching (ASP.NET Settings Schema). For more information about the classes that support caching, see the documentation for the OutputCache and OutputCacheProvider classes. By default, in ASP.NET 4, all HTTP responses, rendered pages, and controls use the in-memory output cache. The defaultProvider attribute for ASP.NET is AspNetInternalProvider. You can change the default output-cache provider used for a Web application by specifying a different provider name for defaultProvider attribute. In addition, you can select different output-cache providers for individual control and for individual requests and programmatically specify which provider to use. For more information, see the HttpApplication.GetOutputCacheProviderName(HttpContext) method. The easiest way to choose a different output-cache provider for different Web user controls is to do so declaratively by using the new providerName attribute in a page or control directive, as shown in the following example: <%@ OutputCache Duration="60" VaryByParam="None" providerName="DiskCache" %> Preloading Web Applications Some Web applications must load large amounts of data or must perform expensive initialization processing before serving the first request. In earlier versions of ASP.NET, for these situations you had to devise custom approaches to "wake up" an ASP.NET application and then run initialization code during the Application_Load method in the Global.asax file. To address this scenario, a new application preload manager (autostart feature) is available when ASP.NET 4 runs on IIS 7.5 on Windows Server 2008 R2. The preload feature provides a controlled approach for starting up an application pool, initializing an ASP.NET application, and then accepting HTTP requests. It lets you perform expensive application initialization prior to processing the first HTTP request. For example, you can use the application preload manager to initialize an application and then signal a load-balancer that the application was initialized and ready to accept HTTP traffic. To use the application preload manager, an IIS administrator sets an application pool in IIS 7.5 to be automatically started by using the following configuration in the applicationHost.config file: <applicationPools> <add name="MyApplicationPool" startMode="AlwaysRunning" /> </applicationPools> Because a single application pool can contain multiple applications, you specify individual applications to be automatically started by using the following configuration in the applicationHost.config file: <sites> <site name="MySite" id="1"> <application path="/" serviceAutoStartEnabled="true" serviceAutoStartProvider="PrewarmMyCache" > <!-- Additional content --> </application> </site> </sites> <!-- Additional content --> <serviceAutoStartProviders> <add name="PrewarmMyCache" type="MyNamespace.CustomInitialization, MyLibrary" /> </serviceAutoStartProviders> When an IIS 7.5 server is cold-started or when an individual application pool is recycled, IIS 7.5 uses the information in the applicationHost.config file to determine which Web applications have to be automatically started. For each application that is marked for preload, IIS7.5 sends a request to ASP.NET 4 to start the application in a state during which the application temporarily does not accept HTTP requests. When it is in this state, ASP.NET instantiates the type defined by the serviceAutoStartProvider attribute (as shown in the previous example) and calls into its public entry point. You create a managed preload type that has the required entry point by implementing the IProcessHostPreloadClient interface, as shown in the following example: public class CustomInitialization : System.Web.Hosting.IProcessHostPreloadClient { public void Preload(string[] parameters) { // Perform initialization. } } After your initialization code runs in the Preload method and after the method returns, the ASP.NET application is ready to process requests. Permanently Redirecting a Page Content in Web applications is often moved over the lifetime of the application. This can lead to links to be out of date, such as the links that are returned by search engines. In ASP.NET, developers have traditionally handled requests to old URLs by using the Redirect method to forward a request to the new URL. However, the Redirect method issues an HTTP 302 (Found) response (which is used for a temporary redirect). This results in an extra HTTP round trip. ASP.NET 4 adds a RedirectPermanent helper method that makes it easy to issue HTTP 301 (Moved Permanently) responses, as in the following example: RedirectPermanent("/newpath/foroldcontent.aspx"); Search engines and other user agents that recognize permanent redirects will store the new URL that is associated with the content, which eliminates the unnecessary round trip made by the browser for temporary redirects. Session State Compression By default, ASP.NET provides two options for storing session state across a Web farm. The first option is a session state provider that invokes an out-of-process session state server. The second option is a session state provider that stores data in a Microsoft SQL Server database. Because both options store state information outside a Web application's worker process, session state has to be serialized before it is sent to remote storage. If a large amount of data is saved in session state, the size of the serialized data can become very large. ASP.NET 4 introduces a new compression option for both kinds of out-of-process session state providers. By using this option, applications that have spare CPU cycles on Web servers can achieve substantial reductions in the size of serialized session state data. You can set this option using the new compressionEnabled attribute of the sessionState element in the configuration file. When the compressionEnabled configuration option is set to true, ASP.NET compresses (and decompresses) serialized session state by using the .NET Framework GZipStreamclass. The following example shows how to set this attribute. <sessionState mode="SqlServer" sqlConnectionString="data source=dbserver;Initial Catalog=aspnetstate" allowCustomSqlDatabase="true" compressionEnabled="true" /> ASP.NET Web Forms Web Forms has been a core feature in ASP.NET since the release of ASP.NET 1.0. Many enhancements have been in this area for ASP.NET 4, such as the following: The ability to set meta tags. More control over view state. Support for recently introduced browsers and devices. Easier ways to work with browser capabilities. Support for using ASP.NET routing with Web Forms. More control over generated IDs. The ability to persist selected rows in data controls. More control over rendered HTML in the FormView and ListView controls. Filtering support for data source controls. Enhanced support for Web standards and accessibility Setting Meta Tags with the Page.MetaKeywords and Page.MetaDescription Properties Two properties have been added to the Page class: MetaKeywords and MetaDescription. These two properties represent corresponding meta tags in the HTML rendered for a page, as shown in the following example: <head id="Head1" runat="server"> <title>Untitled Page</title> <meta name="keywords" content="keyword1, keyword2' /> <meta name="description" content="Description of my page" /> </head> These two properties work like the Title property does, and they can be set in the @ Page directive. For more information, see Page.MetaKeywords and Page.MetaDescription. Enabling View State for Individual Controls A new property has been added to the Control class: ViewStateMode. You can use this property to disable view state for all controls on a page except those for which you explicitly enable view state. View state data is included in a page's HTML and increases the amount of time it takes to send a page to the client and post it back. Storing more view state than is necessary can cause significant decrease in performance. In earlier versions of ASP.NET, you could reduce the impact of view state on a page's performance by disabling view state for specific controls. But sometimes it is easier to enable view state for a few controls that need it instead of disabling it for many that do not need it. For more information, see Control.ViewStateMode. Support for Recently Introduced Browsers and Devices ASP.NET includes a feature that is named browser capabilities that lets you determine the capabilities of the browser that a user is using. Browser capabilities are represented by the HttpBrowserCapabilities object which is stored in the HttpRequest.Browser property. Information about a particular browser's capabilities is defined by a browser definition file. In ASP.NET 4, these browser definition files have been updated to contain information about recently introduced browsers and devices such as Google Chrome, Research in Motion BlackBerry smart phones, and Apple iPhone. Existing browser definition files have also been updated. For more information, see How to: Upgrade an ASP.NET Web Application to ASP.NET 4 and ASP.NET Web Server Controls and Browser Capabilities. The browser definition files that are included with ASP.NET 4 are shown in the following list: •blackberry.browser •chrome.browser •Default.browser •firefox.browser •gateway.browser •generic.browser •ie.browser •iemobile.browser •iphone.browser •opera.browser •safari.browser A New Way to Define Browser Capabilities ASP.NET 4 includes a new feature referred to as browser capabilities providers. As the name suggests, this lets you build a provider that in turn lets you write custom code to determine browser capabilities. In ASP.NET version 3.5 Service Pack 1, you define browser capabilities in an XML file. This file resides in a machine-level folder or an application-level folder. Most developers do not need to customize these files, but for those who do, the provider approach can be easier than dealing with complex XML syntax. The provider approach makes it possible to simplify the process by implementing a common browser definition syntax, or a database that contains up-to-date browser definitions, or even a Web service for such a database. For more information about the new browser capabilities provider, see the What's New for ASP.NET 4 White Paper. Routing in ASP.NET 4 ASP.NET 4 adds built-in support for routing with Web Forms. Routing is a feature that was introduced with ASP.NET 3.5 SP1 and lets you configure an application to use URLs that are meaningful to users and to search engines because they do not have to specify physical file names. This can make your site more user-friendly and your site content more discoverable by search engines. For example, the URL for a page that displays product categories in your application might look like the following example: http://website/products.aspx?categoryid=12 By using routing, you can use the following URL to render the same information: http://website/products/software The second URL lets the user know what to expect and can result in significantly improved rankings in search engine results. the new features include the following: The PageRouteHandler class is a simple HTTP handler that you use when you define routes. You no longer have to write a custom route handler. The HttpRequest.RequestContext and Page.RouteData properties make it easier to access information that is passed in URL parameters. The RouteUrl expression provides a simple way to create a routed URL in markup. The RouteValue expression provides a simple way to extract URL parameter values in markup. The RouteParameter class makes it easier to pass URL parameter values to a query for a data source control (similar to FormParameter). You no longer have to change the Web.config file to enable routing. For more information about routing, see the following topics: ASP.NET Routing Walkthrough: Using ASP.NET Routing in a Web Forms Application How to: Define Routes for Web Forms Applications How to: Construct URLs from Routes How to: Access URL Parameters in a Routed Page Setting Client IDs The new ClientIDMode property makes it easier to write client script that references HTML elements rendered for server controls. Increasing use of Microsoft Ajax makes the need to do this more common. For example, you may have a data control that renders a long list of products with prices and you want to use client script to make a Web service call and update individual prices in the list as they change without refreshing the entire page. Typically you get a reference to an HTML element in client script by using the document.GetElementById method. You pass to this method the value of the id attribute of the HTML element you want to reference. In the case of elements that are rendered for ASP.NET server controls earlier versions of ASP.NET could make this difficult or impossible. You were not always able to predict what id values ASP.NET would generate, or ASP.NET could generate very long id values. The problem was especially difficult for data controls that would generate multiple rows for a single instance of the control in your markup. ASP.NET 4 adds two new algorithms for generating id attributes. These algorithms can generate id attributes that are easier to work with in client script because they are more predictable and that are easier to work with because they are simpler. For more information about how to use the new algorithms, see the following topics: ASP.NET Web Server Control Identification Walkthrough: Making Data-Bound Controls Easier to Access from JavaScript Walkthrough: Making Controls Located in Web User Controls Easier to Access from JavaScript How to: Access Controls from JavaScript by ID Persisting Row Selection in Data Controls The GridView and ListView controls enable users to select a row. In previous versions of ASP.NET, row selection was based on the row index on the page. For example, if you select the third item on page 1 and then move to page 2, the third item on page 2 is selected. In most cases, is more desirable not to select any rows on page 2. ASP.NET 4 supports Persisted Selection, a new feature that was initially supported only in Dynamic Data projects in the .NET Framework 3.5 SP1. When this feature is enabled, the selected item is based on the row data key. This means that if you select the third row on page 1 and move to page 2, nothing is selected on page 2. When you move back to page 1, the third row is still selected. This is a much more natural behavior than the behavior in earlier versions of ASP.NET. Persisted selection is now supported for the GridView and ListView controls in all projects. You can enable this feature in the GridView control, for example, by setting the EnablePersistedSelection property, as shown in the following example: <asp:GridView id="GridView2" runat="server" PersistedSelection="true"> </asp:GridView> FormView Control Enhancements The FormView control is enhanced to make it easier to style the content of the control with CSS. In previous versions of ASP.NET, the FormView control rendered it contents using an item template. This made styling more difficult in the markup because unexpected table row and table cell tags were rendered by the control. The FormView control supports RenderOuterTable, a property in ASP.NET 4. When this property is set to false, as show in the following example, the table tags are not rendered. This makes it easier to apply CSS style to the contents of the control. <asp:FormView ID="FormView1" runat="server" RenderTable="false"> For more information, see FormView Web Server Control Overview. ListView Control Enhancements The ListView control, which was introduced in ASP.NET 3.5, has all the functionality of the GridView control while giving you complete control over the output. This control has been made easier to use in ASP.NET 4. The earlier version of the control required that you specify a layout template that contained a server control with a known ID. The following markup shows a typical example of how to use the ListView control in ASP.NET 3.5. <asp:ListView ID="ListView1" runat="server"> <LayoutTemplate> <asp:PlaceHolder ID="ItemPlaceHolder" runat="server"></asp:PlaceHolder> </LayoutTemplate> <ItemTemplate> <% Eval("LastName")%> </ItemTemplate> </asp:ListView> In ASP.NET 4, the ListView control does not require a layout template. The markup shown in the previous example can be replaced with the following markup: <asp:ListView ID="ListView1" runat="server"> <ItemTemplate> <% Eval("LastName")%> </ItemTemplate> </asp:ListView> For more information, see ListView Web Server Control Overview. Filtering Data with the QueryExtender Control A very common task for developers who create data-driven Web pages is to filter data. This traditionally has been performed by building Where clauses in data source controls. This approach can be complicated, and in some cases the Where syntax does not let you take advantage of the full functionality of the underlying database. To make filtering easier, a new QueryExtender control has been added in ASP.NET 4. This control can be added to EntityDataSource or LinqDataSource controls in order to filter the data returned by these controls. Because the QueryExtender control relies on LINQ, but you do not to need to know how to write LINQ queries to use the query extender. The QueryExtender control supports a variety of filter options. The following lists QueryExtender filter options. Term Definition SearchExpression Searches a field or fields for string values and compares them to a specified string value. RangeExpression Searches a field or fields for values in a range specified by a pair of values. PropertyExpression Compares a specified value to a property value in a field. If the expression evaluates to true, the data that is being examined is returned. OrderByExpression Sorts data by a specified column and sort direction. CustomExpression Calls a function that defines custom filter in the page. For more information, see QueryExtenderQueryExtender Web Server Control Overview. Enhanced Support for Web Standards and Accessibility Earlier versions of ASP.NET controls sometimes render markup that does not conform to HTML, XHTML, or accessibility standards. ASP.NET 4 eliminates most of these exceptions. For details about how the HTML that is rendered by each control meets accessibility standards, see ASP.NET Controls and Accessibility. CSS for Controls that Can be Disabled In ASP.NET 3.5, when a control is disabled (see WebControl.Enabled), a disabled attribute is added to the rendered HTML element. For example, the following markup creates a Label control that is disabled: <asp:Label id="Label1" runat="server"   Text="Test" Enabled="false" /> In ASP.NET 3.5, the previous control settings generate the following HTML: <span id="Label1" disabled="disabled">Test</span> In HTML 4.01, the disabled attribute is not considered valid on span elements. It is valid only on input elements because it specifies that they cannot be accessed. On display-only elements such as span elements, browsers typically support rendering for a disabled appearance, but a Web page that relies on this non-standard behavior is not robust according to accessibility standards. For display-only elements, you should use CSS to indicate a disabled visual appearance. Therefore, by default ASP.NET 4 generates the following HTML for the control settings shown previously: <span id="Label1" class="aspNetDisabled">Test</span> You can change the value of the class attribute that is rendered by default when a control is disabled by setting the DisabledCssClass property. CSS for Validation Controls In ASP.NET 3.5, validation controls render a default color of red as an inline style. For example, the following markup creates a RequiredFieldValidator control: <asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server"   ErrorMessage="Required Field" ControlToValidate="RadioButtonList1" /> ASP.NET 3.5 renders the following HTML for the validator control: <span id="RequiredFieldValidator1"   style="color:Red;visibility:hidden;">RequiredFieldValidator</span> By default, ASP.NET 4 does not render an inline style to set the color to red. An inline style is used only to hide or show the validator, as shown in the following example: <span id="RequiredFieldValidator1"   style"visibility:hidden;">RequiredFieldValidator</span> Therefore, ASP.NET 4 does not automatically show error messages in red. For information about how to use CSS to specify a visual style for a validation control, see Validating User Input in ASP.NET Web Pages. CSS for the Hidden Fields Div Element ASP.NET uses hidden fields to store state information such as view state and control state. These hidden fields are contained by a div element. In ASP.NET 3.5, this div element does not have a class attribute or an id attribute. Therefore, CSS rules that affect all div elements could unintentionally cause this div to be visible. To avoid this problem, ASP.NET 4 renders the div element for hidden fields with a CSS class that you can use to differentiate the hidden fields div from others. The new classvalue is shown in the following example: <div class="aspNetHidden"> CSS for the Table, Image, and ImageButton Controls By default, in ASP.NET 3.5, some controls set the border attribute of rendered HTML to zero (0). The following example shows HTML that is generated by the Table control in ASP.NET 3.5: <table id="Table2" border="0"> The Image control and the ImageButton control also do this. Because this is not necessary and provides visual formatting information that should be provided by using CSS, the attribute is not generated in ASP.NET 4. CSS for the UpdatePanel and UpdateProgress Controls In ASP.NET 3.5, the UpdatePanel and UpdateProgress controls do not support expando attributes. This makes it impossible to set a CSS class on the HTMLelements that they render. In ASP.NET 4 these controls have been changed to accept expando attributes, as shown in the following example: <asp:UpdatePanel runat="server" class="myStyle"> </asp:UpdatePanel> The following HTML is rendered for this markup: <div id="ctl00_MainContent_UpdatePanel1" class="expandoclass"> </div> Eliminating Unnecessary Outer Tables In ASP.NET 3.5, the HTML that is rendered for the following controls is wrapped in a table element whose purpose is to apply inline styles to the entire control: FormView Login PasswordRecovery ChangePassword If you use templates to customize the appearance of these controls, you can specify CSS styles in the markup that you provide in the templates. In that case, no extra outer table is required. In ASP.NET 4, you can prevent the table from being rendered by setting the new RenderOuterTable property to false. Layout Templates for Wizard Controls In ASP.NET 3.5, the Wizard and CreateUserWizard controls generate an HTML table element that is used for visual formatting. In ASP.NET 4 you can use a LayoutTemplate element to specify the layout. If you do this, the HTML table element is not generated. In the template, you create placeholder controls to indicate where items should be dynamically inserted into the control. (This is similar to how the template model for the ListView control works.) For more information, see the Wizard.LayoutTemplate property. New HTML Formatting Options for the CheckBoxList and RadioButtonList Controls ASP.NET 3.5 uses HTML table elements to format the output for the CheckBoxList and RadioButtonList controls. To provide an alternative that does not use tables for visual formatting, ASP.NET 4 adds two new options to the RepeatLayout enumeration: UnorderedList. This option causes the HTML output to be formatted by using ul and li elements instead of a table. OrderedList. This option causes the HTML output to be formatted by using ol and li elements instead of a table. For examples of HTML that is rendered for the new options, see the RepeatLayout enumeration. Header and Footer Elements for the Table Control In ASP.NET 3.5, the Table control can be configured to render thead and tfoot elements by setting the TableSection property of the TableHeaderRow class and the TableFooterRow class. In ASP.NET 4 these properties are set to the appropriate values by default. CSS and ARIA Support for the Menu Control In ASP.NET 3.5, the Menu control uses HTML table elements for visual formatting, and in some configurations it is not keyboard-accessible. ASP.NET 4 addresses these problems and improves accessibility in the following ways: The generated HTML is structured as an unordered list (ul and li elements). CSS is used for visual formatting. The menu behaves in accordance with ARIA standards for keyboard access. You can use arrow keys to navigate menu items. (For information about ARIA, see Accessibility in Visual Studio and ASP.NET.) ARIA role and property attributes are added to the generated HTML. (Attributes are added by using JavaScript instead of included in the HTML, to avoid generating HTML that would cause markup validation errors.) Styles for the Menu control are rendered in a style block at the top of the page, instead of inline with the rendered HTML elements. If you want to use a separate CSS file so that you can modify the menu styles, you can set the Menu control's new IncludeStyleBlock property to false, in which case the style block is not generated. Valid XHTML for the HtmlForm Control In ASP.NET 3.5, the HtmlForm control (which is created implicitly by the <form runat="server"> tag) renders an HTML form element that has both name and id attributes. The name attribute is deprecated in XHTML 1.1. Therefore, this control does not render the name attribute in ASP.NET 4. Maintaining Backward Compatibility in Control Rendering An existing ASP.NET Web site might have code in it that assumes that controls are rendering HTML the way they do in ASP.NET 3.5. To avoid causing backward compatibility problems when you upgrade the site to ASP.NET 4, you can have ASP.NET continue to generate HTML the way it does in ASP.NET 3.5 after you upgrade the site. To do so, you can set the controlRenderingCompatibilityVersion attribute of the pages element to "3.5" in the Web.config file of an ASP.NET 4 Web site, as shown in the following example: <system.web>   <pages controlRenderingCompatibilityVersion="3.5"/> </system.web> If this setting is omitted, the default value is the same as the version of ASP.NET that the Web site targets. (For information about multi-targeting in ASP.NET, see .NET Framework Multi-Targeting for ASP.NET Web Projects.) ASP.NET MVC ASP.NET MVC helps Web developers build compelling standards-based Web sites that are easy to maintain because it decreases the dependency among application layers by using the Model-View-Controller (MVC) pattern. MVC provides complete control over the page markup. It also improves testability by inherently supporting Test Driven Development (TDD). Web sites created using ASP.NET MVC have a modular architecture. This allows members of a team to work independently on the various modules and can be used to improve collaboration. For example, developers can work on the model and controller layers (data and logic), while the designer work on the view (presentation). For tutorials, walkthroughs, conceptual content, code samples, and a complete API reference, see ASP.NET MVC 2. Dynamic Data Dynamic Data was introduced in the .NET Framework 3.5 SP1 release in mid-2008. This feature provides many enhancements for creating data-driven applications, such as the following: A RAD experience for quickly building a data-driven Web site. Automatic validation that is based on constraints defined in the data model. The ability to easily change the markup that is generated for fields in the GridView and DetailsView controls by using field templates that are part of your Dynamic Data project. For ASP.NET 4, Dynamic Data has been enhanced to give developers even more power for quickly building data-driven Web sites. For more information, see ASP.NET Dynamic Data Content Map. Enabling Dynamic Data for Individual Data-Bound Controls in Existing Web Applications You can use Dynamic Data features in existing ASP.NET Web applications that do not use scaffolding by enabling Dynamic Data for individual data-bound controls. Dynamic Data provides the presentation and data layer support for rendering these controls. When you enable Dynamic Data for data-bound controls, you get the following benefits: Setting default values for data fields. Dynamic Data enables you to provide default values at run time for fields in a data control. Interacting with the database without creating and registering a data model. Automatically validating the data that is entered by the user without writing any code. For more information, see Walkthrough: Enabling Dynamic Data in ASP.NET Data-Bound Controls. New Field Templates for URLs and E-mail Addresses ASP.NET 4 introduces two new built-in field templates, EmailAddress.ascx and Url.ascx. These templates are used for fields that are marked as EmailAddress or Url using the DataTypeAttribute attribute. For EmailAddress objects, the field is displayed as a hyperlink that is created by using the mailto: protocol. When users click the link, it opens the user's e-mail client and creates a skeleton message. Objects typed as Url are displayed as ordinary hyperlinks. The following example shows how to mark fields. [DataType(DataType.EmailAddress)] public object HomeEmail { get; set; } [DataType(DataType.Url)] public object Website { get; set; } Creating Links with the DynamicHyperLink Control Dynamic Data uses the new routing feature that was added in the .NET Framework 3.5 SP1 to control the URLs that users see when they access the Web site. The new DynamicHyperLink control makes it easy to build links to pages in a Dynamic Data site. For information, see How to: Create Table Action Links in Dynamic Data Support for Inheritance in the Data Model Both the ADO.NET Entity Framework and LINQ to SQL support inheritance in their data models. An example of this might be a database that has an InsurancePolicy table. It might also contain CarPolicy and HousePolicy tables that have the same fields as InsurancePolicy and then add more fields. Dynamic Data has been modified to understand inherited objects in the data model and to support scaffolding for the inherited tables. For more information, see Walkthrough: Mapping Table-per-Hierarchy Inheritance in Dynamic Data. Support for Many-to-Many Relationships (Entity Framework Only) The Entity Framework has rich support for many-to-many relationships between tables, which is implemented by exposing the relationship as a collection on an Entity object. New field templates (ManyToMany.ascx and ManyToMany_Edit.ascx) have been added to provide support for displaying and editing data that is involved in many-to-many relationships. For more information, see Working with Many-to-Many Data Relationships in Dynamic Data. New Attributes to Control Display and Support Enumerations The DisplayAttribute has been added to give you additional control over how fields are displayed. The DisplayNameAttribute attribute in earlier versions of Dynamic Data enabled you to change the name that is used as a caption for a field. The new DisplayAttribute class lets you specify more options for displaying a field, such as the order in which a field is displayed and whether a field will be used as a filter. The attribute also provides independent control of the name that is used for the labels in a GridView control, the name that is used in a DetailsView control, the help text for the field, and the watermark used for the field (if the field accepts text input). The EnumDataTypeAttribute class has been added to let you map fields to enumerations. When you apply this attribute to a field, you specify an enumeration type. Dynamic Data uses the new Enumeration.ascx field template to create UI for displaying and editing enumeration values. The template maps the values from the database to the names in the enumeration. Enhanced Support for Filters Dynamic Data 1.0 had built-in filters for Boolean columns and foreign-key columns. The filters did not let you specify the order in which they were displayed. The new DisplayAttribute attribute addresses this by giving you control over whether a column appears as a filter and in what order it will be displayed. An additional enhancement is that filtering support has been rewritten to use the new QueryExtender feature of Web Forms. This lets you create filters without requiring knowledge of the data source control that the filters will be used with. Along with these extensions, filters have also been turned into template controls, which lets you add new ones. Finally, the DisplayAttribute class mentioned earlier allows the default filter to be overridden, in the same way that UIHint allows the default field template for a column to be overridden. For more information, see Walkthrough: Filtering Rows in Tables That Have a Parent-Child Relationship and QueryableFilterRepeater. ASP.NET Chart Control The ASP.NET chart server control enables you to create ASP.NET pages applications that have simple, intuitive charts for complex statistical or financial analysis. The chart control supports the following features: Data series, chart areas, axes, legends, labels, titles, and more. Data binding. Data manipulation, such as copying, splitting, merging, alignment, grouping, sorting, searching, and filtering. Statistical formulas and financial formulas. Advanced chart appearance, such as 3-D, anti-aliasing, lighting, and perspective. Events and customizations. Interactivity and Microsoft Ajax. Support for the Ajax Content Delivery Network (CDN), which provides an optimized way for you to add Microsoft Ajax Library and jQuery scripts to your Web applications. For more information, see Chart Web Server Control Overview. Visual Web Developer Enhancements The following sections provide information about enhancements and new features in Visual Studio 2010 and Visual Web Developer Express. The Web page designer in Visual Studio 2010 has been enhanced for better CSS compatibility, includes additional support for HTML and ASP.NET markup snippets, and features a redesigned version of IntelliSense for JScript. Improved CSS Compatibility The Visual Web Developer designer in Visual Studio 2010 has been updated to improve CSS 2.1 standards compliance. The designer better preserves HTML source code and is more robust than in previous versions of Visual Studio. HTML and JScript Snippets In the HTML editor, IntelliSense auto-completes tag names. The IntelliSense Snippets feature auto-completes whole tags and more. In Visual Studio 2010, IntelliSense snippets are supported for JScript, alongside C# and Visual Basic, which were supported in earlier versions of Visual Studio. Visual Studio 2010 includes over 200 snippets that help you auto-complete common ASP.NET and HTML tags, including required attributes (such as runat="server") and common attributes specific to a tag (such as ID, DataSourceID, ControlToValidate, and Text). You can download additional snippets, or you can write your own snippets that encapsulate the blocks of markup that you or your team use for common tasks. For more information on HTML snippets, see Walkthrough: Using HTML Snippets. JScript IntelliSense Enhancements In Visual 2010, JScript IntelliSense has been redesigned to provide an even richer editing experience. IntelliSense now recognizes objects that have been dynamically generated by methods such as registerNamespace and by similar techniques used by other JavaScript frameworks. Performance has been improved to analyze large libraries of script and to display IntelliSense with little or no processing delay. Compatibility has been significantly increased to support almost all third-party libraries and to support diverse coding styles. Documentation comments are now parsed as you type and are immediately leveraged by IntelliSense. Web Application Deployment with Visual Studio 2010 For Web application projects, Visual Studio now provides tools that work with the IIS Web Deployment Tool (Web Deploy) to automate many processes that had to be done manually in earlier versions of ASP.NET. For example, the following tasks can now be automated: Creating an IIS application on the destination computer and configuring IIS settings. Copying files to the destination computer. Changing Web.config settings that must be different in the destination environment. Propagating changes to data or data structures in SQL Server databases that are used by the Web application. For more information about Web application deployment, see ASP.NET Deployment Content Map. Enhancements to ASP.NET Multi-Targeting ASP.NET 4 adds new features to the multi-targeting feature to make it easier to work with projects that target earlier versions of the .NET Framework. Multi-targeting was introduced in ASP.NET 3.5 to enable you to use the latest version of Visual Studio without having to upgrade existing Web sites or Web services to the latest version of the .NET Framework. In Visual Studio 2008, when you work with a project targeted for an earlier version of the .NET Framework, most features of the development environment adapt to the targeted version. However, IntelliSense displays language features that are available in the current version, and property windows display properties available in the current version. In Visual Studio 2010, only language features and properties available in the targeted version of the .NET Framework are shown. For more information about multi-targeting, see the following topics: .NET Framework Multi-Targeting for ASP.NET Web Projects ASP.NET Side-by-Side Execution Overview How to: Host Web Applications That Use Different Versions of the .NET Framework on the Same Server How to: Deploy Web Site Projects Targeted for Earlier Versions of the .NET Framework

    Read the article

  • Guide to reduce TFS database growth using the Test Attachment Cleaner

    - by terje
    Recently there has been several reports on TFS databases growing too fast and growing too big.  Notable this has been observed when one has started to use more features of the Testing system.  Also, the TFS 2010 handles test results differently from TFS 2008, and this leads to more data stored in the TFS databases. As a consequence of this there has been released some tools to remove unneeded data in the database, and also some fixes to correct for bugs which has been found and corrected during this process.  Further some preventive practices and maintenance rules should be adopted. A lot of people have blogged about this, among these are: Anu’s very important blog post here describes both the problem and solutions to handle it.  She describes both the Test Attachment Cleaner tool, and also some QFE/CU releases to fix some underlying bugs which prevented the tool from being fully effective. Brian Harry’s blog post here describes the problem too This forum thread describes the problem with some solution hints. Ravi Shanker’s blog post here describes best practices on solving this (TBP) Grant Holidays blogpost here describes strategies to use the Test Attachment Cleaner both to detect space problems and how to rectify them.   The problem can be divided into the following areas: Publishing of test results from builds Publishing of manual test results and their attachments in particular Publishing of deployment binaries for use during a test run Bugs in SQL server preventing total cleanup of data (All the published data above is published into the TFS database as attachments.) The test results will include all data being collected during the run.  Some of this data can grow rather large, like IntelliTrace logs and video recordings.   Also the pushing of binaries which happen for automated test runs, including tests run during a build using code coverage which will include all the files in the deployment folder, contributes a lot to the size of the attached data.   In order to handle this systematically, I have set up a 3-stage process: Find out if you have a database space issue Set up your TFS server to minimize potential database issues If you have the “problem”, clean up the database and otherwise keep it clean   Analyze the data Are your database( s) growing ?  Are unused test results growing out of proportion ? To find out about this you need to query your TFS database for some of the information, and use the Test Attachment Cleaner (TAC) to obtain some  more detailed information. If you don’t have too many databases you can use the SQL Server reports from within the Management Studio to analyze the database and table sizes. Or, you can use a set of queries . I find queries often faster to use because I can tweak them the way I want them.  But be aware that these queries are non-documented and non-supported and may change when the product team wants to change them. If you have multiple Project Collections, find out which might have problems: (Disclaimer: The queries below work on TFS 2010. They will not work on Dev-11, since the table structure have been changed.  I will try to update them for Dev-11 when it is released.) Open a SQL Management Studio session onto the SQL Server where you have your TFS Databases. Use the query below to find the Project Collection databases and their sizes, in descending size order.  use master select DB_NAME(database_id) AS DBName, (size/128) SizeInMB FROM sys.master_files where type=0 and substring(db_name(database_id),1,4)='Tfs_' and DB_NAME(database_id)<>'Tfs_Configuration' order by size desc Doing this on one of our SQL servers gives the following results: It is pretty easy to see on which collection to start the work   Find out which tables are possibly too large Keep a special watch out for the Tfs_Attachment table. Use the script at the bottom of Grant’s blog to find the table sizes in descending size order. In our case we got this result: From Grant’s blog we learnt that the tbl_Content is in the Version Control category, so the major only big issue we have here is the tbl_AttachmentContent.   Find out which team projects have possibly too large attachments In order to use the TAC to find and eventually delete attachment data we need to find out which team projects have these attachments. The team project is a required parameter to the TAC. Use the following query to find this, replace the collection database name with whatever applies in your case:   use Tfs_DefaultCollection select p.projectname, sum(a.compressedlength)/1024/1024 as sizeInMB from dbo.tbl_Attachment as a inner join tbl_testrun as tr on a.testrunid=tr.testrunid inner join tbl_project as p on p.projectid=tr.projectid group by p.projectname order by sum(a.compressedlength) desc In our case we got this result (had to remove some names), out of more than 100 team projects accumulated over quite some years: As can be seen here it is pretty obvious the “Byggtjeneste – Projects” are the main team project to take care of, with the ones on lines 2-4 as the next ones.  Check which attachment types takes up the most space It can be nice to know which attachment types takes up the space, so run the following query: use Tfs_DefaultCollection select a.attachmenttype, sum(a.compressedlength)/1024/1024 as sizeInMB from dbo.tbl_Attachment as a inner join tbl_testrun as tr on a.testrunid=tr.testrunid inner join tbl_project as p on p.projectid=tr.projectid group by a.attachmenttype order by sum(a.compressedlength) desc We then got this result: From this it is pretty obvious that the problem here is the binary files, as also mentioned in Anu’s blog. Check which file types, by their extension, takes up the most space Run the following query use Tfs_DefaultCollection select SUBSTRING(filename,len(filename)-CHARINDEX('.',REVERSE(filename))+2,999)as Extension, sum(compressedlength)/1024 as SizeInKB from tbl_Attachment group by SUBSTRING(filename,len(filename)-CHARINDEX('.',REVERSE(filename))+2,999) order by sum(compressedlength) desc This gives a result like this:   Now you should have collected enough information to tell you what to do – if you got to do something, and some of the information you need in order to set up your TAC settings file, both for a cleanup and for scheduled maintenance later.    Get your TFS server and environment properly set up Even if you have got the problem or if have yet not got the problem, you should ensure the TFS server is set up so that the risk of getting into this problem is minimized.  To ensure this you should install the following set of updates and components. The assumption is that your TFS Server is at SP1 level. Install the QFE for KB2608743 – which also contains detailed instructions on its use, download from here. The QFE changes the default settings to not upload deployed binaries, which are used in automated test runs. Binaries will still be uploaded if: Code coverage is enabled in the test settings. You change the UploadDeploymentItem to true in the testsettings file. Be aware that this might be reset back to false by another user which haven't installed this QFE. The hotfix should be installed to The build servers (the build agents) The machine hosting the Test Controller Local development computers (Visual Studio) Local test computers (MTM) It is not required to install it to the TFS Server, test agents or the build controller – it has no effect on these programs. If you use the SQL Server 2008 R2 you should also install the CU 10 (or later).  This CU fixes a potential problem of hanging “ghost” files.  This seems to happen only in certain trigger situations, but to ensure it doesn’t bite you, it is better to make sure this CU is installed. There is no such CU for SQL Server 2008 pre-R2 Work around:  If you suspect hanging ghost files, they can be – with some mental effort, deduced from the ghost counters using the following SQL query: use master SELECT DB_NAME(database_id) as 'database',OBJECT_NAME(object_id) as 'objectname', index_type_desc,ghost_record_count,version_ghost_record_count,record_count,avg_record_size_in_bytes FROM sys.dm_db_index_physical_stats (DB_ID(N'<DatabaseName>'), OBJECT_ID(N'<TableName>'), NULL, NULL , 'DETAILED') The problem is a stalled ghost cleanup process.  Restarting the SQL server after having stopped all components that depends on it, like the TFS Server and SPS services – that is all applications that connect to the SQL server. Then restart the SQL server, and finally start up all dependent processes again.  (I would guess a complete server reboot would do the trick too.) After this the ghost cleanup process will run properly again. The fix will come in the next CU cycle for SQL Server R2 SP1.  The R2 pre-SP1 and R2 SP1 have separate maintenance cycles, and are maintained individually. Each have its own set of CU’s. When it comes I will add the link here to that CU. The "hanging ghost file” issue came up after one have run the TAC, and deleted enourmes amount of data.  The SQL Server can get into this hanging state (without the QFE) in certain cases due to this. And of course, install and set up the Test Attachment Cleaner command line power tool.  This should be done following some guidelines from Ravi Shanker: “When you run TAC, ensure that you are deleting small chunks of data at regular intervals (say run TAC every night at 3AM to delete data that is between age 730 to 731 days) – this will ensure that small amounts of data are being deleted and SQL ghosted record cleanup can catch up with the number of deletes performed. “ This rule minimizes the risk of the ghosted hang problem to occur, and further makes it easier for the SQL server ghosting process to work smoothly. “Run DBCC SHRINKDB post the ghosted records are cleaned up to physically reclaim the space on the file system” This is the last step in a 3 step process of removing SQL server data. First they are logically deleted. Then they are cleaned out by the ghosting process, and finally removed using the shrinkdb command. Cleaning out the attachments The TAC is run from the command line using a set of parameters and controlled by a settingsfile.  The parameters point out a server uri including the team project collection and also point at a specific team project. So in order to run this for multiple team projects regularly one has to set up a script to run the TAC multiple times, once for each team project.  When you install the TAC there is a very useful readme file in the same directory. When the deployment binaries are published to the TFS server, ALL items are published up from the deployment folder. That often means much more files than you would assume are necessary. This is a brute force technique. It works, but you need to take care when cleaning up. Grant has shown how their settings file looks in his blog post, removing all attachments older than 180 days , as long as there are no active workitems connected to them. This setting can be useful to clean out all items, both in a clean-up once operation, and in a general There are two scenarios we need to consider: Cleaning up an existing overgrown database Maintaining a server to avoid an overgrown database using scheduled TAC   1. Cleaning up a database which has grown too big due to these attachments. This job is a “Once” job.  We do this once and then move on to make sure it won’t happen again, by taking the actions in 2) below.  In this scenario you should only consider the large files. Your goal should be to simply reduce the size, and don’t bother about  the smaller stuff. That can be left a scheduled TAC cleanup ( 2 below). Here you can use a very general settings file, and just remove the large attachments, or you can choose to remove any old items.  Grant’s settings file is an example of the last one.  A settings file to remove only large attachments could look like this: <!-- Scenario : Remove large files --> <DeletionCriteria> <TestRun /> <Attachment> <SizeInMB GreaterThan="10" /> </Attachment> </DeletionCriteria> Or like this: If you want only to remove dll’s and pdb’s about that size, add an Extensions-section.  Without that section, all extensions will be deleted. <!-- Scenario : Remove large files of type dll's and pdb's --> <DeletionCriteria> <TestRun /> <Attachment> <SizeInMB GreaterThan="10" /> <Extensions> <Include value="dll" /> <Include value="pdb" /> </Extensions> </Attachment> </DeletionCriteria> Before you start up your scheduled maintenance, you should clear out all older items. 2. Scheduled maintenance using the TAC If you run a schedule every night, and remove old items, and also remove them in small batches.  It is important to run this often, like every night, in order to keep the number of deleted items low. That way the SQL ghost process works better. One approach could be to delete all items older than some number of days, let’s say 180 days. This could be combined with restricting it to keep attachments with active or resolved bugs.  Doing this every night ensures that only small amounts of data is deleted. <!-- Scenario : Remove old items except if they have active or resolved bugs --> <DeletionCriteria> <TestRun> <AgeInDays OlderThan="180" /> </TestRun> <Attachment /> <LinkedBugs> <Exclude state="Active" /> <Exclude state="Resolved"/> </LinkedBugs> </DeletionCriteria> In my experience there are projects which are left with active or resolved workitems, akthough no further work is done.  It can be wise to have a cleanup process with no restrictions on linked bugs at all. Note that you then have to remove the whole LinkedBugs section. A approach which could work better here is to do a two step approach, use the schedule above to with no LinkedBugs as a sweeper cleaning task taking away all data older than you could care about.  Then have another scheduled TAC task to take out more specifically attachments that you are not likely to use. This task could be much more specific, and based on your analysis clean out what you know is troublesome data. <!-- Scenario : Remove specific files early --> <DeletionCriteria> <TestRun > <AgeInDays OlderThan="30" /> </TestRun> <Attachment> <SizeInMB GreaterThan="10" /> <Extensions> <Include value="iTrace"/> <Include value="dll"/> <Include value="pdb"/> <Include value="wmv"/> </Extensions> </Attachment> <LinkedBugs> <Exclude state="Active" /> <Exclude state="Resolved" /> </LinkedBugs> </DeletionCriteria> The readme document for the TAC says that it recognizes “internal” extensions, but it does recognize any extension. To run the tool do the following command: tcmpt attachmentcleanup /collection:your_tfs_collection_url /teamproject:your_team_project /settingsfile:path_to_settingsfile /outputfile:%temp%/teamproject.tcmpt.log /mode:delete   Shrinking the database You could run a shrink database command after the TAC has run in cases where there are a lot of data being deleted.  In this case you SHOULD do it, to free up all that space.  But, after the shrink operation you should do a rebuild indexes, since the shrink operation will leave the database in a very fragmented state, which will reduce performance. Note that you need to rebuild indexes, reorganizing is not enough. For smaller amounts of data you should NOT shrink the database, since the data will be reused by the SQL server when it need to add more records.  In fact, it is regarded as a bad practice to shrink the database regularly.  So on a daily maintenance schedule you should NOT shrink the database. To shrink the database you do a DBCC SHRINKDATABASE command, and then follow up with a DBCC INDEXDEFRAG afterwards.  I find the easiest way to do this is to create a SQL Maintenance plan including the Shrink Database Task and the Rebuild Index Task and just execute it when you need to do this.

    Read the article

  • CodePlex Daily Summary for Tuesday, February 08, 2011

    CodePlex Daily Summary for Tuesday, February 08, 2011Popular ReleasesyoutubeFisher: youtubeFisher 3.0 [beta]: What's new: Supports YouTube's new layout Complete internal refactoringNearforums - ASP.NET MVC forum engine: Nearforums v5.0: Version 5.0 of the ASP.NET MVC Forum Engine, containing the following improvements: .NET 4.0 as target framework using ASP.NET MVC 3. All views migrated to Razor for cleaner markup. Alternate template (Layout file) for mobile devices 4 Bug Fixes since Version 4.1 Visit the project Roadmap for more details.fuv: 1.0 release, codename Chopper Joe: features: search/replace :o to open file :s to save file :q to quitASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager html generation optimized new features for the lookup (add additional search data ) live demo went aeroEnhSim: EnhSim 2.3.6 BETA: 2.3.6 BETAThis release supports WoW patch 4.06 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 Changes since 2.3.0 ...TestApi - a library of Test APIs: TestApi v0.6: TestApi v0.6 comes with the following changes: TestApi code development has been moved to Codeplex: Moved TestApi soluton to VS 2010; Moved all source code to Codeplex. All development work is done there now. Fault Injection API: Integrated the unmanaged FaultInjectionEngine.dll COM component in the build; Cleaned up FaultInjectionEngine.dll to build at warning level 4; Implemented “FaultScope” which allows for in-process fault injection; Added automation scripts & sample program; ...AutoLoL: AutoLoL v1.5.5: AutoChat now allows up to 6 items. Items with nr. 7-0 will be removed! News page url's are now opened in the default browser Added a context menu to the system tray icon (thanks to Alex Banagos) AutoChat now allows configuring the Chat Keys and the Modifier Key The recent files list now supports compact and full mode Fix: Swapped mouse buttons are now properly detected Fix: Sometimes the Play button was pressed while still greyed out Champion: Karma Note: You can also run the u...mojoPortal: 2.3.6.2: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2362-released.aspx Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Rawr: Rawr 4.0.19 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Trac...IronRuby: 1.1.2: IronRuby 1.1.2 is a servicing release that keeps on improving compatibility with Ruby 1.9.2 and includes IronRuby integration to Visual Studio 2010. We decided to drop 1.8.6 compatibility mode in all post-1.0 releases. We recommend using IronRuby 1.0 if you need 1.8.6 compatibility. In this release we fixed several major issues: - problems that blocked Gem installation in certain cases - regex syntax: the parser was replaced with a new one that is much more compatible with Ruby 1.9.2 - cras...Pyxis 2: Production Release: Pyxis 2.0.0.13 - Full Production Release This release of Pyxis 2 offers you a wide range of features: Launch Applications in their own threads & domains Render alpha-blended icons on the desktop Support for SD & USB drives Online App Store Dynamic & Static IP support Menus & Modals Over a dozen GUI controls File selection dialogs Folder selection dialog Application, Bootloader, and Firmware Updating Update Release Notes Much More!Microsoft All-In-One Code Framework: Sample Browser v2 (CTP Release): Sample Browser v2 (CTP Release) http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=205917MVVM Light Toolkit: MVVM Light Toolkit V3 SP1 (4): There was a small issue with the previous release that caused errors when installing the templates in VS10 Express. This release corrects the error. Only use this if you encountered issues when installing the previous release. No changes in the binaries.Finestra Virtual Desktops: 1.0: Finally the version 1.0 release! Sorry for the long delay since the last release, but I think that you'll find this release to be really smooth, really stable, and a really great enhancement to Windows. New features include: Windows 7 taskbar integration Major performance and usability improvements Redesigned look and feel New name: Finestra Better automatic updating Much faster full-screen switcher Fixes Windows 7 hotkey collisions by default Updated installerFacebook C# SDK: 5.0.2 (BETA): PLEASE TAKE A FEW MINUTES TO GIVE US SOME FEEDBACK: Facebook C# SDK Survey This is third BETA release of the version 5 branch of the Facebook C# SDK. Remember this is a BETA build. Some things may change or not work exactly as planned. We are absolutely looking for feedback on this release to help us improve the final 5.X.X release. This release contains some breaking changes. Particularly with authentication. After spending time reviewing the trouble areas that people are having using th...ASP.NET MVC SiteMap provider: MvcSiteMapProvider 3.0.0 for MVC3: Using NuGet?MvcSiteMapProvider is also listed in the NuGet feed. Learn more... Like the project? Consider a donation!Donate via PayPal via PayPal. ChangelogTargeting ASP.NET MVC 3 and .NET 4.0 Additional UpdatePriority options for generating XML sitemaps Allow to specify target on SiteMapTitleAttribute One action with multiple routes and breadcrumbs Medium Trust optimizations Create SiteMapTitleAttribute for setting parent title IntelliSense for your sitemap with MvcSiteMapSchem...patterns & practices SharePoint Guidance: SharePoint Guidance 2010 Hands On Lab: SharePoint Guidance 2010 Hands On Lab consists of six labs: one for logging, one for service location, and four for application setting manager. Each lab takes about 20 minutes to walk through. Each lab consists of a PDF document. You can go through the steps in the doc to create solution and then build/deploy the solution and run the lab. For those of you who wants to save the time, we included the final solution so you can just build/deploy the solution and run the lab.Value Injecter - object(s) to -> object mapper: 2.3: it lets you define your own convention-based matching algorithms (ValueInjections) in order to match up (inject) source values to destination values. inject from multiple sources in one InjectFrom added ConventionInjectionMobile Device Detection and Redirection: 0.1.11.11: Improvements to Beta Release The following changes have been made in version 0.1.11.11: BlackBerry Version 6 devices (such as the 9800 Torch) are now correctly identified with a dedicated handler. Android powered devices are now correctly identified. Minor change to Provider.cs to improve performance and optimise data sent to 51Degrees.mobi if the option is enabled. GC.collect is no longer called at any point. All garbage collection now happens automatically IMPORTANT CHANGES This rele...TweetSharp: TweetSharp v2.0.0.0 - Preview 10: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 9 ChangesAdded support for trends Added support for Silverlight 4 Elevated WP7 fixes Third Party Library VersionsHammock v1.1.7: http://hammock.codeplex.com Json.NET 4.0 Release 1: http://json.codeplex.comNew Projectsbisolu_sendus: bisolu smsBlack & Scholes: Black & Scholes OptionsCosLabs: CosLabs makes it easy to see the full capabilities of the Cosmos operating system toolkit. CosLabs has a number of experiments to find new and unique uses for Cosmos. It's developed in C#.DeployToAzure: DeployToAzure allows automating deployment of Windows Azure project and making it a part of TFS 2010 build process without using PowerShell and Azure Management CmdLets. Digital: Educational purposesDiscogsNet: DiscogsNet is a .NET library to query the Discogs.com API and parse the Discogs XML data dump files. It's developed in C# and usable from any .NET language. The API of the library is focused on ease of use and intuitiveness.DJME - The jQuery extensions for ASP.NET MVC: DJME - The jQuery extensions for ASP.NET MVC is a lightweight framework which helps you build rich user interfaces for ASP.NET MVC while enjoying great developer productivity. DokuDB: Visio AddIn to document different versions of a databaseDtsConfig Explorer: This project is a windows froms application that helps explore a SSIS dtsconfig file with an easy wayEveryDNS Service: Windows service to automatically send your current IP address to everydns.net for dynamic domains. Automatically monitors and sends IP address changes without having to be logged in. The project is built in C# targeting the .NET 4.0 framework.EvoSim - Evolution Simulation: EvoSim is a pet project to learn aspects of MVVM, WPF/Silverlight, and Parallel Processing features of .NET 4. The goal is to simulate a world filled with creatures that move, eat, reproduce, and die according to Darwinian evolutionary principles. It is tile and turn based.EZStorage: A storage library for XNA based on EasyStorage but abstracting in an XML based file list for each folder, allowing file listings on all folders and details like file creation dates which are no longer possible in XNA 4.0ForeverBell's Snake: A snake game written in VB.NET.Glauca Browser: This is a browser with a webkit core inside.Grauers SharePoint 2010 Custom MasterPage Feature: This is a SharePoint 2010 Custom MastePage feature. Custom Master and custom CSS Blog post about the project: http://www.grauers.net/archive/2011/02/07/build-a-sharepoint-2010-custom-mastepage-with-visual-studio-2010.aspxHamming Code Sample: HamCode demonstrate how the hamming code work, result of coded and decoded data. Shows the benefits of hamming method/codeHydroDesktop Mercurial Test: This is a trial version of the HydroDesktop project (hydrodesktop.codeplex.com) running on Mercurial source code repository. We first want to test whether the data update/download is happening fine before switching the official HydroDesktop website to the new system.LateBindingApi: Creates .Net Proxy Components from COM Type Libraries.Middlesex County College Library Wireless Auto Login: The Middlesex County College Library Wireless Auto Login automatically logs a computer in to the Middlesex County College (Edison, NJ) Library's WifiMobility: Mobility is a small program that reads from a text file. The text file includes everything about the program, right down to that cute little bunny on your desktop! Try Mobility today!OpenMFC: OpenMFC is opensource version of MFC for using with C/C++ compiler without MFC.Orchard Content Sharing: This Orchard module adds content sharing functionality via integration with AddThis.com sharing service.Orchard Wunder Weather Widget: This project is used to maintain the source code for the Wunder Weather widget in the Orchard gallery.Professional Audio Recorder: Professional Audio Recorder is a Audio Recorder for Windows Phone 7Python Node Info for Umbraco: Designed to assist Umbraco macro authors who are writing their macros in Python. Provides a helper macro that, when inserted into a page, will enable the display of an info panel showing the page node properties as represented in Python.Softina.Graphs: Softina.Graphs is a graph managment and algorithm utility. It includes a set of libraries to work with graph processing. It is written using .net framework with c# language and MS Visual Studio 2008. Client applications is created using devexpress components.spangesharp: Application to help people learn c#Visual Studio Private Extension Gallery: Add a new tab in the Visual Studio extension manager to manage private extensions.WCF Home Framework: Home Framework is a service-oriented framework able to facilitate deploy and management of wcf services in a mid-size scenario project.Windows Phone 7 Video Player: This project contains all the source of an application for Windows Phone 7 to consume an RSS Media exposed by our Smooth Streaming Video Player plugin for WordPress (http://smooth.codeplex.com).WOL Shopping List: This is a shoppingList version of WOL's NearMeWP7RSSReader: Updated RSSReader project for Windows Phone 7 using the RTM tools with the October 2010 update.Xen (XNA Extended) Framework: The Xen Framework is a set of libraries that provides and extends XNA 4.0 functionality to make game development easier and faster while producing clean, maintainable code. Xen frees you up to spend more time building your game.

    Read the article

  • Install Control Center Agent on Oracle Application Server

    - by qianqian.wu
    Control Center Agent (CCA) The Control Center Agent is the OWB component that runs the Template Mappings in the Oracle Containers for J2EE (OC4J) server; also referred to as the J2EE Runtime. The Control Center Agent provides a Java-based runtime environment that can be installed on Oracle and non-Oracle database hosts. The Control Center Agent provides fundamental infrastructure for the heterogeneous, Code Template-based mapping support and Web services-related features of OWB in this release. In Oracle Warehouse Builder 11gR2 the Control Center Agent, by default will run in the built-in OC4J that is bundled in the Oracle Home. Besides that, you also have ability to install the Control Center Agent in an Oracle Application Server install. In this article, you will find step-by-step instructions how to install the Control Center Agent on an Oracle Application Server instance. The instructions cover the following tasks: Task 1: Install and Configure the Application Server Task 2: Deploy the Control Center Agent to the Application Server Task 3: Optional Configuration Tasks   Task 1: Install and Configure the Application Server Before configuring the Application Server, you need to install it from Oracle Application Server CD-ROM, or by downloading the installation program from Oracle Technology Network (OTN). Once the installation is completed, you are ready to configure the Application Server. The purpose of the configuration task is to make sure the Control Center Agent ear file can be deployed and runs in the Application Server successfully. The essential configuration tasks are outlined below: · Modify the OC4J Startup Script · Set up Control Center Agent Server Side Logging · Set up Audit Table Data Source · Copy ct_permissions.properties File · Set up Security Roles for Control Center Agent · Create JMS Queues · Install JDBC Drivers to OC4J Modify the OC4J Startup Script The OC4J startup script “opmn.xml” is located in Application Server configuration directory, $AS_HOME/opmn/conf. $AS_HOME stands for the root home directory of the application server. Open the file opmn.xml in a text editor, and alter the contents of the file as displayed in the following sample. You need to make sure that: The MaxPerSize is set to 128M. This is to ensure that you allocate enough PermGen space to OC4J to run Control Center Agent. This will prevent java.lang.OutOfMemoryError when running the agent. The Python.path sets the path for the Python library files used by the Control Center Agent: jython_lib.zip and jython_owblib.jar. These two files are in the $OWB_HOME/owb/lib/int directory, where $OWB_HOME is the directory where owb is installed. · The km_security_needed determines whether restrictions will be applied to the kinds of operating system commands allowed to be executed by the OWB Code Template script executed by Control Center Agent. Setting km_security_needed to “true” enforces such restriction while setting it to “false” removes such restrictions. Set up Control Center Agent Server Side Logging Ensure that you are in the Application Server configuration directory, $AS_HOME/j2ee/home/config. Open the file j2ee-logging.xml in a text editor and add the following lines to the log handler section. The jrt-internal-log-handler is the handler used by Control Center Agent runtime logger to create log files. Then add the following entry into the loggers section to create the logger for Control Center Agent runtime auditing. Set up Audit Table Data Source To enable Audit Table logging, a managed data source and connection pool need to be set up before Control Center Agent deployment. Ensure that you are in the Application Server configuration directory, $AS_HOME/j2ee/home/config. Open the file data-sources.xml in a text editor. Define the audit data source shown below in the file, <managed-data-source name="AuditDS" connection-pool-name="OWBSYS Audit   Connection Pool" jndi-name="jdbc/AuditDS"/> <connection-pool name="OWBSYS Audit Connection Pool">   <connection-factory factory-class="oracle.jdbc.pool.OracleDataSource"     user="owbsys_audit" password="owbsys_audit"     url="jdbc:oracle:thin:@//localhost:1521/ORCL"/> </connection-pool> Copy ct_permissions.properties File The ct_permissions.properties can be obtained from $OWB_HOME /owb/jrt/config/ directory. You need to copy the file to $AS_HOME/j2ee/home/config directory.This properties file takes effect when the setting km-security is set to true in Control Center Agent. By default the ALLOWED_CMD is commented out in ct_permissions.properties file. This prevents all system command from being invoked from scripts executed in Control Center Agent (when km-security is set to true). To allow certain system commands to be invoked, ALLOWED_CMD needs to be uncommented out, and the system commands (allowed to be invoked) need to be added to the ALLOWED_CMD. Set up Security Roles for Control Center Agent You can set up the Control Center Agent security roles through Oracle Enterprise Manager. In a web browser, navigate to Enterprise Manager Homepage (e.g. http://hostname:8889/em). 1. Log in using the oc4jadmin credentials. After the Cluster Topology page is loaded, click home (the OC4J instance). This takes you to the home page of the OC4J instance. On the OC4J home screen, click the Administration tab. On the Administration Tasks screen, expand Security. Click the task icon next to Security Providers. 2. On Security Providers page click on the button “Instance Level Security”. On Instance Level Security page, go to “Realms” tab. You will see a row for the default realm “jazn.com” in the results table. It has a “Roles” column and a “Users” column. Click on the number in “Roles” column. In the “Roles” page it will display all the roles available for the realm. Click on “Create” button to create a new role “OWB_J2EE_ EXECUTOR”. 3. On the Add Role screen, enter Name OWB_J2EE_EXECUTOR, and click OK. 4. Follow the same steps as before, and create a new role “OWB_J2EE_OPERATOR”. 5. Assign role “oc4j-administrators” and “OWB_J2EE_EXECUTOR” to the role “OWB_J2EE_OPERATOR” by moving these roles from “Available Roles” and click “OK” to save. 6. Go back to Instance Level Security page and create a new role “OWB_J2EE_ADMINISTRATOR”. 7. Assign roles “OWB_J2EE_ OPERATOR” and “OWB_J2EE_EXECUTOR” to the role “OWB_J2EE_ ADMINISTRATOR” by moving these roles from “Available Roles” and click “OK” to save. 8.Go back to Instance Level Security page. This time, click on the number in “Users” column for the realm “jazn.com”. In the “Users” page, it shows all the users defined for this realm. Locate the user “oc4jadmin” in the results table and click on it. 9. Assign the roles “OWB_J2EE_ADMINISTRATOR” and “oc4j-app-administrators” to this user by moving the role from the “Available Roles” selection box to “Selected Roles” box and click “Apply” to save. 10. Go back to Instance Level Security page and create a new role “OWB_INTERNAL_USERS”, assign no user or role to this role. Simply click “OK” to create this role. Now you have finished creating the security roles required for Control Center Agent. Create JMS Queues You need to create two JMS queues for Control Center Agent: owbQueue and abort_owbQueue. 1. Now go to OC4J home Page. On the OC4J home screen, click the Administration tab. On the Administration Tasks screen, expand Services and then expand Enterprise Messaging Service. Click the task icon next to JMS Destinations. 2. On JMS Destinations page, click “Create New” button to create a new JMS queue. On Add Destination page, choose “Queue” as Destination Type. Put “owbQueue” as Destination Name. Select “In Memory Persistence Only” as the Persistence Type and put “jms/owbQueue” as JNDI Location and click on “OK” to finish. 3. Follow the same instruction as above to create the owb_abortQueue. Now you have finished creating the JMS queues required for Control Center Agent. Install JDBC Drivers to OC4J In order to execute Code Templates using commercial databases other than Oracle, e.g. DB2, SQL Server etc, the corresponding jdbc driver files need to be added to $AS_HOME/j2ee/home/applib directory. 1. To install other JDBC drivers to OC4J, first obtain the .jar file containing the JDBC driver. All the external JDBC drivers .jar files can be found in the directory: $OWB_HOME/owb/lib/ext/. For DB2, the files needed are db2jcc.jar and db2jcc_license_cu.jar. For SQL Server the file is sqljdbc.jar. For sunopsis JDBC drivers, the file needed is snpsxmlo.jar. 2. Copy the required JDBC driver file into the directory $AS_HOME/j2ee/home/applib. Now you have finished the Application Server configuration. To make the configuration to take an effect, you need to restart the Application Server.   Task 2: Deploy the Control Center Agent to the Application Server Now you can deploy the Control Center Agent to the Application Server. In a web browser, navigate to Enterprise Manager Homepage (e.g. http://hostname:8889/em). 1. Log in using the oc4jadmin credentials. After the Cluster Topology page is loaded, click home (the OC4J instance). This takes you to the home page of the OC4J instance. On the OC4J home screen, click the Applications tab. Click Deploy to begin deploying Control Center Agent. 2. On the Deploy: Select Archive screen, under Archive, select Archive is present on local host. Upload the archive to the server where Application Server Control is running. Click Browse and locate the jrt.ear file in the $OWB_HOME/owb/jrt/applications directory. Under Deployment Plan, select Automatically create a new deployment plan. Click Next. 3. Wait for the ear file to be uploaded to Application Server. On the Deploy: Application Attributes screen, enter Application Name jrt, and Context Root jrt. Leave the other attributes at their default values. Click Next. 4. On Deploy: Deployment Settings screen, leave all attributes at their default values, and click Deploy. This will take about 1 minute or so and when the application is deployed successfully, a confirmation message will be displayed. Now the Control Center Agent is started automatically. Go back to OC4J home page and click on Applications tab to make sure the deployed application jrt is showing in the applications list.   Task 3: Optional Configuration Tasks The optional configuration tasks contain: · Secure Control Center Agent Web Service · Setting the PATH Environment Variable Secure Control Center Agent Web Service If you want to use JRTWebService with a secure website, you need to do the following steps, 1. Create a file “secure-web-site.xml” in the $AS_HOME/j2ee/home/config directory. The file can be obtained from $OWB_HOME/owb/jrt/config directory. A sample secure-web-site.xml is shown as below. We need to modify the “protocol” to “https”, and “secure” to “true”, also choose an port as the secure http port. Also we need to add the entry “ssl-config” in the file. Remember to use the absolute path for the key store file. 2. Modify the file “server.xml” that is located at $AS_HOME/j2ee/home/config directory. Then add the <web-site> element in the file for the secure-web-site. 3. Create a key store file “serverkeystore.jks” in the $AS_HOME/j2ee/home/config directory. The file can be obtained from $OWB_HOME/owb/jrt/config directory. After the three files are altered, restart the application server. Now you can access the JRTWebService in SSL way through https://hostname:4443/jrt/webservice. Setting the PATH Environment Variable Sometimes, some system commands such as linux ls, sh etc, can not be executed successfully during the script execution due to they are not found in PATH. To ensure they work normally, you can setup the environment variable PATH. Let’s navigate to the Enterprise Manager Homepage. 1. Go to OC4J home screen and click the Administration tab. Expand Administration Tasks, then expand Properties. Click the task icon next to Server Properties. 2. On the Server Properties screen, scroll down to Environment Variables section. Under Environment Variables, click Add Another Row. Enter PATH in Name, and fill Value with directories that contain the system commands. Click Apply.   After you work through this article, I believe you have developed a deeper understanding of the Control Center Agent installation process, and you can apply this knowledge in other installation plan such as Control Center Agent installation on Standalone OC4J.

    Read the article

  • AuthnRequest Settings in OIF / SP

    - by Damien Carru
    In this article, I will list the various OIF/SP settings that affect how an AuthnRequest message is created in OIF in a Federation SSO flow. The AuthnRequest message is used by an SP to start a Federation SSO operation and to indicate to the IdP how the operation should be executed: How the user should be challenged at the IdP Whether or not the user should be challenged at the IdP, even if a session already exists at the IdP for this user Which NameID format should be requested in the SAML Assertion Which binding (Artifact or HTTP-POST) should be requested from the IdP to send the Assertion Which profile should be used by OIF/SP to send the AuthnRequest message Enjoy the reading! Protocols The SAML 2.0, SAML 1.1 and OpenID 2.0 protocols define different message elements and rules that allow an administrator to influence the Federation SSO flows in different manners, when the SP triggers an SSO operation: SAML 2.0 allows extensive customization via the AuthnRequest message SAML 1.1 does not allow any customization, since the specifications do not define an authentication request message OpenID 2.0 allows for some customization, mainly via the OpenID 2.0 extensions such as PAPE or UI SAML 2.0 OIF/SP allows the customization of the SAML 2.0 AuthnRequest message for the following elements: ForceAuthn: Boolean indicating whether or not the IdP should force the user for re-authentication, even if the user has still a valid session By default set to false IsPassive Boolean indicating whether or not the IdP is allowed to interact with the user as part of the Federation SSO operation. If false, the Federation SSO operation might result in a failure with the NoPassive error code, because the IdP will not have been able to identify the user By default set to false RequestedAuthnContext Element indicating how the user should be challenged at the IdP If the SP requests a Federation Authentication Method unknown to the IdP or for which the IdP is not configured, then the Federation SSO flow will result in a failure with the NoAuthnContext error code By default missing NameIDPolicy Element indicating which NameID format the IdP should include in the SAML Assertion If the SP requests a NameID format unknown to the IdP or for which the IdP is not configured, then the Federation SSO flow will result in a failure with the InvalidNameIDPolicy error code If missing, the IdP will generally use the default NameID format configured for this SP partner at the IdP By default missing ProtocolBinding Element indicating which SAML binding should be used by the IdP to redirect the user to the SP with the SAML Assertion Set to Artifact or HTTP-POST By default set to HTTP-POST OIF/SP also allows the administrator to configure the server to: Set which binding should be used by OIF/SP to redirect the user to the IdP with the SAML 2.0 AuthnRequest message: Redirect or HTTP-POST By default set to Redirect Set which binding should be used by OIF/SP to redirect the user to the IdP during logout with SAML 2.0 Logout messages: Redirect or HTTP-POST By default set to Redirect SAML 1.1 The SAML 1.1 specifications do not define a message for the SP to send to the IdP when a Federation SSO operation is started. As such, there is no capability to configure OIF/SP on how to affect the start of the Federation SSO flow. OpenID 2.0 OpenID 2.0 defines several extensions that can be used by the SP/RP to affect how the Federation SSO operation will take place: OpenID request: mode: String indicating if the IdP/OP can visually interact with the user checkid_immediate does not allow the IdP/OP to interact with the user checkid_setup allows user interaction By default set to checkid_setup PAPE Extension: max_auth_age : Integer indicating in seconds the maximum amount of time since when the user authenticated at the IdP. If MaxAuthnAge is bigger that the time since when the user last authenticated at the IdP, then the user must be re-challenged. OIF/SP will set this attribute to 0 if the administrator configured ForceAuthn to true, otherwise this attribute won't be set Default missing preferred_auth_policies Contains a Federation Authentication Method Element indicating how the user should be challenged at the IdP By default missing Only specified in the OpenID request if the IdP/OP supports PAPE in XRDS, if OpenID discovery is used. UI Extension Popup mode Boolean indicating the popup mode is enabled for the Federation SSO By default missing Language Preference String containing the preferred language, set based on the browser's language preferences. By default missing Icon: Boolean indicating if the icon feature is enabled. In that case, the IdP/OP would look at the SP/RP XRDS to determine how to retrieve the icon By default missing Only specified in the OpenID request if the IdP/OP supports UI Extenstion in XRDS, if OpenID discovery is used. ForceAuthn and IsPassive WLST Command OIF/SP provides the WLST configureIdPAuthnRequest() command to set: ForceAuthn as a boolean: In a SAML 2.0 AuthnRequest, the ForceAuthn field will be set to true or false In an OpenID 2.0 request, if ForceAuthn in the configuration was set to true, then the max_auth_age field of the PAPE request will be set to 0, otherwise, max_auth_age won't be set IsPassive as a boolean: In a SAML 2.0 AuthnRequest, the IsPassive field will be set to true or false In an OpenID 2.0 request, if IsPassive in the configuration was set to true, then the mode field of the OpenID request will be set to checkid_immediate, otherwise set to checkid_setup Test In this test, OIF/SP is integrated with a remote SAML 2.0 IdP Partner, with the OOTB configuration. Based on this setup, when OIF/SP starts a Federation SSO flow, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer>   <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> Let's configure OIF/SP for that IdP Partner, so that the SP will require the IdP to re-challenge the user, even if the user is already authenticated: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the configureIdPAuthnRequest() command:configureIdPAuthnRequest(partner="AcmeIdP", forceAuthn="true") Exit the WLST environment:exit() After the changes, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ForceAuthn="true" ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer>   <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> To display or delete the ForceAuthn/IsPassive settings, perform the following operatons: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the configureIdPAuthnRequest() command: To display the ForceAuthn/IsPassive settings on the partnerconfigureIdPAuthnRequest(partner="AcmeIdP", displayOnly="true") To delete the ForceAuthn/IsPassive settings from the partnerconfigureIdPAuthnRequest(partner="AcmeIdP", delete="true") Exit the WLST environment:exit() Requested Fed Authn Method In my earlier "Fed Authentication Method Requests in OIF / SP" article, I discussed how OIF/SP could be configured to request a specific Federation Authentication Method from the IdP when starting a Federation SSO operation, by setting elements in the SSO request message. WLST Command The OIF WLST commands that can be used are: setIdPPartnerProfileRequestAuthnMethod() which will configure the requested Federation Authentication Method in a specific IdP Partner Profile, and accepts the following parameters: partnerProfile: name of the IdP Partner Profile authnMethod: the Federation Authentication Method to request displayOnly: an optional parameter indicating if the method should display the current requested Federation Authentication Method instead of setting it delete: an optional parameter indicating if the method should delete the current requested Federation Authentication Method instead of setting it setIdPPartnerRequestAuthnMethod() which will configure the specified IdP Partner entry with the requested Federation Authentication Method, and accepts the following parameters: partner: name of the IdP Partner authnMethod: the Federation Authentication Method to request displayOnly: an optional parameter indicating if the method should display the current requested Federation Authentication Method instead of setting it delete: an optional parameter indicating if the method should delete the current requested Federation Authentication Method instead of setting it This applies to SAML 2.0 and OpenID 2.0 protocols. See the "Fed Authentication Method Requests in OIF / SP" article for more information. Test In this test, OIF/SP is integrated with a remote SAML 2.0 IdP Partner, with the OOTB configuration. Based on this setup, when OIF/SP starts a Federation SSO flow, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer>   <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> Let's configure OIF/SP for that IdP Partner, so that the SP will request the IdP to use a mechanism mapped to the urn:oasis:names:tc:SAML:2.0:ac:classes:X509 Federation Authentication Method to authenticate the user: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setIdPPartnerRequestAuthnMethod() command:setIdPPartnerRequestAuthnMethod("AcmeIdP", "urn:oasis:names:tc:SAML:2.0:ac:classes:X509") Exit the WLST environment:exit() After the changes, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer>   <samlp:NameIDPolicy AllowCreate="true"/>   <samlp:RequestedAuthnContext Comparison="minimum">      <saml:AuthnContextClassRef xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion">         urn:oasis:names:tc:SAML:2.0:ac:classes:X509      </saml:AuthnContextClassRef>   </samlp:RequestedAuthnContext></samlp:AuthnRequest> NameID Format The SAML 2.0 protocol allows for the SP to request from the IdP a specific NameID format to be used when the Assertion is issued by the IdP. Note: SAML 1.1 and OpenID 2.0 do not provide such a mechanism Configuring OIF The administrator can configure OIF/SP to request a NameID format in the SAML 2.0 AuthnRequest via: The OAM Administration Console, in the IdP Partner entry The OIF WLST setIdPPartnerNameIDFormat() command that will modify the IdP Partner configuration OAM Administration Console To configure the requested NameID format via the OAM Administration Console, perform the following steps: Go to the OAM Administration Console: http(s)://oam-admin-host:oam-admin-port/oamconsole Navigate to Identity Federation -> Service Provider Administration Open the IdP Partner you wish to modify In the Authentication Request NameID Format dropdown box with one of the values None The NameID format will be set Default Email Address The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:emailAddress X.509 Subject The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:X509SubjectName Windows Name Qualifier The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:WindowsDomainQualifiedName Kerberos The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:kerberos Transient The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:transient Unspecified The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified Custom In this case, a field would appear allowing the administrator to indicate the custom NameID format to use The NameID format will be set to the specified format Persistent The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:persistent I selected Email Address in this example Save WLST Command To configure the requested NameID format via the OIF WLST setIdPPartnerNameIDFormat() command, perform the following steps: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setIdPPartnerNameIDFormat() command:setIdPPartnerNameIDFormat("PARTNER", "FORMAT", customFormat="CUSTOM") Replace PARTNER with the IdP Partner name Replace FORMAT with one of the following: orafed-none The NameID format will be set Default orafed-emailaddress The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:emailAddress orafed-x509 The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:X509SubjectName orafed-windowsnamequalifier The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:WindowsDomainQualifiedName orafed-kerberos The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:kerberos orafed-transient The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:transient orafed-unspecified The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified orafed-custom In this case, a field would appear allowing the administrator to indicate the custom NameID format to use The NameID format will be set to the specified format orafed-persistent The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:persistent customFormat will need to be set if the FORMAT is set to orafed-custom An example would be:setIdPPartnerNameIDFormat("AcmeIdP", "orafed-emailaddress") Exit the WLST environment:exit() Test In this test, OIF/SP is integrated with a remote SAML 2.0 IdP Partner, with the OOTB configuration. Based on this setup, when OIF/SP starts a Federation SSO flow, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer> <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> After the changes performed either via the OAM Administration Console or via the OIF WLST setIdPPartnerNameIDFormat() command where Email Address would be requested as the NameID Format, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ForceAuthn="false" IsPassive="false" ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer> <samlp:NameIDPolicy Format="urn:oasis:names:tc:SAML:1.1:nameid-format:emailAddress" AllowCreate="true"/></samlp:AuthnRequest> Protocol Binding The SAML 2.0 specifications define a way for the SP to request which binding should be used by the IdP to redirect the user to the SP with the SAML 2.0 Assertion: the ProtocolBinding attribute indicates the binding the IdP should use. It is set to: Either urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST for HTTP-POST Or urn:oasis:names:tc:SAML:2.0:bindings:Artifact for Artifact The SAML 2.0 specifications also define different ways to redirect the user from the SP to the IdP with the SAML 2.0 AuthnRequest message, as the SP can send the message: Either via HTTP Redirect Or HTTP POST (Other bindings can theoretically be used such as Artifact, but these are not used in practice) Configuring OIF OIF can be configured: Via the OAM Administration Console or the OIF WLST configureSAMLBinding() command to set the Assertion Response binding to be used Via the OIF WLST configureSAMLBinding() command to indicate how the SAML AuthnRequest message should be sent Note: the binding for sending the SAML 2.0 AuthnRequest message will also be used to send the SAML 2.0 LogoutRequest and LogoutResponse messages. OAM Administration Console To configure the SSO Response/Assertion Binding via the OAM Administration Console, perform the following steps: Go to the OAM Administration Console: http(s)://oam-admin-host:oam-admin-port/oamconsole Navigate to Identity Federation -> Service Provider Administration Open the IdP Partner you wish to modify Check the "HTTP POST SSO Response Binding" box to request the IdP to return the SSO Response via HTTP POST, otherwise uncheck it to request artifact Save WLST Command To configure the SSO Response/Assertion Binding as well as the AuthnRequest Binding via the OIF WLST configureSAMLBinding() command, perform the following steps: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the configureSAMLBinding() command:configureSAMLBinding("PARTNER", "PARTNER_TYPE", binding, ssoResponseBinding="httppost") Replace PARTNER with the Partner name Replace PARTNER_TYPE with the Partner type (idp or sp) Replace binding with the binding to be used to send the AuthnRequest and LogoutRequest/LogoutResponse messages (should be httpredirect in most case; default) httppost for HTTP-POST binding httpredirect for HTTP-Redirect binding Specify optionally ssoResponseBinding to indicate how the SSO Assertion should be sent back httppost for HTTP-POST binding artifactfor for Artifact binding An example would be:configureSAMLBinding("AcmeIdP", "idp", "httpredirect", ssoResponseBinding="httppost") Exit the WLST environment:exit() Test In this test, OIF/SP is integrated with a remote SAML 2.0 IdP Partner, with the OOTB configuration which requests HTTP-POST from the IdP to send the SSO Assertion. Based on this setup, when OIF/SP starts a Federation SSO flow, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer>   <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> In the next article, I will cover the various crypto configuration properties in OIF that are used to affect the Federation SSO exchanges.Cheers,Damien Carru

    Read the article

  • Continuous Integration for SQL Server Part II – Integration Testing

    - by Ben Rees
    My previous post, on setting up Continuous Integration for SQL Server databases using GitHub, Bamboo and Red Gate’s tools, covered the first two parts of a simple Database Continuous Delivery process: Putting your database in to a source control system, and, Running a continuous integration process, each time changes are checked in. However there is, of course, a lot more to to Continuous Delivery than that. Specifically, in addition to the above: Putting some actual integration tests in to the CI process (otherwise, they don’t really do much, do they!?), Deploying the database changes with a managed, automated approach, Monitoring what you’ve just put live, to make sure you haven’t broken anything. This post will detail how to set up a very simple pipeline for implementing the first of these (continuous integration testing). NB: A lot of the setup in this post is built on top of the configuration from before, so it might be difficult to implement this post without running through part I first. There’ll then be a third post on automated database deployment followed by a final post dealing with the last item – monitoring changes on the live system. In the previous post, I used a mixture of Red Gate products and other 3rd party software – GitHub and Atlassian Bamboo specifically. This was partly because I believe most people work in an heterogeneous environment, using software from different vendors to suit their purposes and I wanted to show how this could work for this process. For example, you could easily substitute Atlassian’s BitBucket or Stash for GitHub, depending on your needs, or use an alternative CI server such as TeamCity, TFS or Jenkins. However, in this, post, I’ll be mostly using Red Gate products only (other than tSQLt). I would do this, firstly because I work for Red Gate. However, I also think that in the area of Database Delivery processes, nobody else has the offerings to implement this process fully – so I didn’t have any choice!   Background on Continuous Delivery For me, a great source of information on what makes a proper Continuous Delivery process is the Jez Humble and David Farley classic: Continuous Delivery – Reliable Software Releases through Build, Test, and Deployment Automation This book is not of course, primarily about databases, and the process I outline here and in the previous article is a gross simplification of what Jez and David describe (not least because it’s that much harder for databases!). However, a lot of the principles that they describe can be equally applied to database development and, I would argue, should be. As I say however, what I describe here is a very simple version of what would be required for a full production process. A couple of useful resources on handling some of these complexities can be found in the following two references: Refactoring Databases – Evolutionary Database Design, by Scott J Ambler and Pramod J. Sadalage Versioning Databases – Branching and Merging, by Scott Allen In particular, I don’t deal at all with the issues of multiple branches and merging of those branches, an issue made particularly acute by the use of GitHub. The other point worth making is that, in the words of Martin Fowler: Continuous Delivery is about keeping your application in a state where it is always able to deploy into production.   I.e. we are not talking about continuously delivery updates to the production database every time someone checks in an amendment to a stored procedure. That is possible (and what Martin calls Continuous Deployment). However, again, that’s more than I describe in this article. And I doubt I need to remind DBAs or Developers to Proceed with Caution!   Integration Testing Back to something practical. The next stage, building on our set up from the previous article, is to add in some integration tests to the process. As I say, the CI process, though interesting, isn’t enormously useful without some sort of test process running. For this we’ll use the tSQLt framework, an open source framework designed specifically for running SQL Server tests. tSQLt is part of Red Gate’s SQL Test found on http://www.red-gate.com/products/sql-development/sql-test/ or can be downloaded separately from www.tsqlt.org - though I’ll provide a step-by-step guide below for setting this up. Getting tSQLt set up via SQL Test Click on the link http://www.red-gate.com/products/sql-development/sql-test/ and click on the blue Download button to download the Red Gate SQL Test product, if not already installed. Follow the install process for SQL Test to install the SQL Server Management Studio (SSMS) plugin on to your machine, if not already installed. Open SSMS. You should now see SQL Test under the Tools menu:   Clicking this link will give you the basic SQL Test dialogue: As yet, though we’ve installed the SQL Test product we haven’t yet installed the tSQLt test framework on to any particular database. To do this, we need to add our RedGateApp database using this dialogue, by clicking on the + Add Database to SQL Test… link, selecting the RedGateApp database and clicking the Add Database link:   In the next screen, SQL Test describes what will be installed on the database for the tSQLt framework. Also in this dialogue, uncheck the “Add SQL Cop tests” option (shown below). SQL Cop is a great set of pre-defined tests that work within the tSQLt framework to check the general health of your SQL Server database. However, we won’t be using them in this particular simple example: Once you’ve clicked on the OK button, the changes described in the dialogue will be made to your database. Some of these are shown in the left-hand-side below: We’ve now installed the framework. However, we haven’t actually created any tests, so this will be the next step. But, before we proceed, we’ve made an update to our database so should, again check this in to source control, adding comments as required:   Also worth a quick check that your build still runs with the new additions!: (And a quick check of the RedGateAppCI database shows that the changes have been made).   Creating and Testing a Unit Test There are, of course, a lot of very interesting unit tests that you could and should set up for a database. The great thing about the tSQLt framework is that you can write these in SQL. The example I’m going to use here is pretty Mickey Mouse – our database table is going to include some email addresses as reference data and I want to check whether these are all in a correct email format. Nothing clever but it illustrates the process and hopefully shows the method by which more interesting tests could be set up. Adding Reference Data to our Database To start, I want to add some reference data to my database, and have this source controlled (as well as the schema). First of all I need to add some data in to my solitary table – this can be done a number of ways, but I’ll do this in SSMS for simplicity: I then add some reference data to my table: Currently this reference data just exists in the database. For proper integration testing, this needs to form part of the source-controlled version of the database – and so needs to be added to the Git repository. This can be done via SQL Source Control, though first a Primary Key needs to be added to the table. Right click the table, select Design, then right-click on the first “id” row. Then click on “Set Primary Key”: NB: once this change is made, click Save to save the change to the table. Then, to source control this reference data, right click on the table (dbo.Email) and selecting the following option:   In the next screen, link the data in the Email table, by selecting it from the list and clicking “save and close”: We should at this point re-commit the changes (both the addition of the Primary Key, and the data) to the Git repo. NB: From here on, I won’t show screenshots for the GitHub side of things – it’s the same each time: whenever a change is made in SQL Source Control and committed to your local folder, you then need to sync this in the GitHub Windows client (as this is where the build server, Bamboo is taking it from). An interesting point to note here, when these changes are committed in SQL Source Control (right-click database and select “Commit Changes to Source Control..”): The display gives a warning about possibly needing a migration script for the “Add Primary Key” step of the changes. This isn’t actually necessary in this case, but this mechanism would allow you to create override scripts to replace the default change scripts created by the SQL Compare engine (which runs underneath SQL Source Control). Ignoring this message (!), we add a comment and commit the changes to Git. I then sync these, run a build (or the build gets run automatically), and check that the data is being deployed over to the target RedGateAppCI database:   Creating and Running the Test As I mention, the test I’m going to use here is a very simple one - are the email addresses in my reference table valid? This isn’t of course, a full test of email validation (I expect the email addresses I’ve chosen here aren’t really the those of the Fab Four) – but just a very basic check of format used. I’ve taken the relevant SQL from this Stack Overflow article. In SSMS select “SQL Test” from the Tools menu, then click on + New Test: In the next screen, give your new test a name, and also enter a name in the Test Class box (test classes are schemas that help you keep things organised). Also check that the database in which the test is going to be created is correct – RedGateApp in this example: Click “Create Test”. After closing a couple of subsequent dialogues, you’ll see a dummy script for the test, that needs filling in:   We now need to define the SQL for our test. As mentioned before, tSQLt allows you to write your unit tests in T-SQL, and the code I’m going to use here is as below. This needs to be copied and pasted in to the query window, to replace the default given by tSQLt: –  Basic email check test ALTER PROCEDURE [MyChecks].[test Check Email Addresses] AS BEGIN SET NOCOUNT ON         Declare @Output VarChar(max)     Set @Output = ”       SELECT  @Output = @Output + Email +Char(13) + Char(10) FROM dbo.Email WHERE email NOT LIKE ‘%_@__%.__%’       If @Output > ”         Begin             Set @Output = Char(13) + Char(10)                           + @Output             EXEC tSQLt.Fail@Output         End   END;   Once this script is entered, hit execute to add the Stored Procedure to the database. Before committing the test to source control,  it’s worth just checking that it works! For a positive test, click on “SQL Test” from the Tools menu, then click Run Tests. You should see output like the following: - a green tick to indicate success! But of course, what we also need to do is test that this is actually doing something by showing a failed test. Edit one of the email addresses in your table to an incorrect format: Now, re-run the same SQL Test as before and you’ll see the following: Great – we now know that our test is really doing something! You’ll also see a useful error message at the bottom of SSMS: (leave the email address as invalid for now, for the next steps). The next stage is to check this new test in to source control again, by right-clicking on the database and checking in the changes with a commit message (and not forgetting to sync in the GitHub client):   Checking that the Tests are Running as Integration Tests After the changes above are made, and after a build has run on Bamboo (manual or automatic), looking at the Stored Procedures for the RedGateAppCI, the SPROC for the new test has been moved over to the database. However this is not exactly what we were after. We didn’t want to just copy objects from one database to another, but actually run the tests as part of the build/integration test process. I.e. we’re continuously checking any changes we make (in this case, to the reference data emails), to ensure we’re not breaking a test that we’ve set up. The behaviour we want to see is that, if we check in static data that is incorrect (as we did in step 9 above) and we have the tSQLt test set up, then our build in Bamboo should fail. However, re-running the build shows the following: - sadly, a successful build! To make sure the tSQLt tests are run as part of the integration test, we need to amend a switch in the Red Gate CI config file. First, navigate to file sqlCI.targets in your working folder: Edit this document, make the following change, save the document, then commit and sync this change in the GitHub client: <!-- tSQLt tests --> <!-- Optional --> <!-- To run tSQLt tests in source control for the database, enter true. --> <enableTsqlt>true</enableTsqlt> Now, if we re-run the build in Bamboo (NB: I’ve moved to a new server here, hence different address and build number): - superb, a broken build!! The error message isn’t great here, so to get more detailed info, click on the full build log link on this page (below the fold). The interesting part of the log shown is towards the bottom. Pulling out this part:   21-Jun-2013 11:35:19 Build FAILED. 21-Jun-2013 11:35:19 21-Jun-2013 11:35:19 "C:\Users\Administrator\bamboo-home\xml-data\build-dir\RGA-RGP-JOB1\sqlCI.proj" (default target) (1) -> 21-Jun-2013 11:35:19 (sqlCI target) -> 21-Jun-2013 11:35:19 EXEC : sqlCI error occurred: RedGate.Deploy.SqlServerDbPackage.Shared.Exceptions.InvalidSqlException: Test Case Summary: 1 test case(s) executed, 0 succeeded, 1 failed, 0 errored. [C:\Users\Administrator\bamboo-home\xml-data\build-dir\RGA-RGP-JOB1\sqlCI.proj] 21-Jun-2013 11:35:19 EXEC : sqlCI error occurred: [MyChecks].[test Check Email Addresses] failed: [C:\Users\Administrator\bamboo-home\xml-data\build-dir\RGA-RGP-JOB1\sqlCI.proj] 21-Jun-2013 11:35:19 EXEC : sqlCI error occurred: ringo.starr@beatles [C:\Users\Administrator\bamboo-home\xml-data\build-dir\RGA-RGP-JOB1\sqlCI.proj] 21-Jun-2013 11:35:19 EXEC : sqlCI error occurred: [C:\Users\Administrator\bamboo-home\xml-data\build-dir\RGA-RGP-JOB1\sqlCI.proj] 21-Jun-2013 11:35:19 EXEC : sqlCI error occurred: +----------------------+ [C:\Users\Administrator\bamboo-home\xml-data\build-dir\RGA-RGP-JOB1\sqlCI.proj] 21-Jun-2013 11:35:19 EXEC : sqlCI error occurred: |Test Execution Summary| [C:\Users\Administrator\bamboo-home\xml-data\build-dir\RGA-RGP-JOB1\sqlCI.proj]   As a final check, we should make sure that, if we now fix this error, the build succeeds. So in SSMS, I’m going to correct the invalid email address, then check this change in to SQL Source Control (with a comment), commit to GitHub, and re-run the build:   This should have fixed the build: It worked! Summary This has been a very quick run through the implementation of CI for databases, including tSQLt tests to test whether your database updates are working. The next post in this series will focus on automated deployment – we’ve tested our database changes, how can we now deploy these to target sites?  

    Read the article

  • CodePlex Daily Summary for Wednesday, November 21, 2012

    CodePlex Daily Summary for Wednesday, November 21, 2012Popular ReleasesImapX 2: ImapX 2.0.0.6: An updated release of the ImapX 2 library, containing many bugfixes for both, the library and the sample application.Metodología General Ajustada - MGA: 03.05.05: Cambios John: Se modificó el Procedimiento Alamacenado PROF03ObjetivoProductoConsultarIdF03 que no incluía los campos de IdUnidadMedida y UnidadMedida, lo que generaba error en la capa de datos al leer estos campos (PasarDataSetAPROF03ObjetivoProductoInfo) y terminaba devolviendo NULL en los registros, esto no dejaba la información en la Exportación y por ende en la Importación no subían los Productos. Generación de instaladores. Soporte técnico por correo electrónico, telefónico y en sitio.WiX Toolset: WiX v3.7 RC: WiX v3.7 RC (3.7.1119.0) provides feature complete Bundle update and reference tracking plus several bug fixes. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/11/20/WiX-v3.7-Release-Candidate-availablePicturethrill: Version 2.11.20.0: Fixed up Bing image provider on Windows 8Excel AddIn to reset the last worksheet cell: XSFormatCleaner.xla: Modified the commandbar code to use CommandBar IDs instead of English names.Json.NET: Json.NET 4.5 Release 11: New feature - Added ITraceWriter, MemoryTraceWriter, DiagnosticsTraceWriter New feature - Added StringEscapeHandling with options to escape HTML and non-ASCII characters New feature - Added non-generic JToken.ToObject methods New feature - Deserialize ISet<T> properties as HashSet<T> New feature - Added implicit conversions for Uri, TimeSpan, Guid New feature - Missing byte, char, Guid, TimeSpan and Uri explicit conversion operators added to JToken New feature - Special case...EntitiesToDTOs - Entity Framework DTO Generator: EntitiesToDTOs.v3.0: DTOs and Assemblers can be generated inside project folders! Choose the types you want to generate! Support for Visual Studio 2012 !!! Support for new Entity Framework EDMX (format used by VS2012) ! Support for Enum Types! Optional automatic check for updates! Added the following methods to Assemblers! IEnumerable<DTO>.ToEntities() : ICollection<Entity> IEnumerable<Entity>.ToDTOs() : ICollection<DTO> Indicate class identifier for DTOs and Assemblers! Cleaner Assemblers code....mojoPortal: 2.3.9.4: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2394-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0, but we recommend you to use .NET 4, we will probably drop support for .NET 3.5 once .NET 4.5 is available The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code and are not intended for use in Visual Studio. To download the source code see getting the lates...VidCoder: 1.4.6 Beta: Brought back the x264 advanced options panel due to popular demand. Thank you for all the feedback. x264 Preset/Profile/Tune/Level has been moved back to the Video tab, along with a copy of the "extra options" string. Added Fast Decode and Zero Latency checkboxes to support multiple Tunes. Added cropping option "None". Audio bitrates that are incompatible with the encoder (such as MP3 > 320 kbps) are no longer preset on the list. Fixed crash on opening VidCoder after de-selecting "re...DotNetNuke® Store: 03.01.07: What's New in this release? IMPORTANT: this version requires DotNetNuke 04.06.02 or higher! DO NOT REPORT BUGS HERE IN THE ISSUE TRACKER, INSTEAD USE THE DotNetNuke Store Forum! Bugs corrected: - Replaced some hard coded references to the default address provider classes by the corresponding interfaces to allow the creation of another address provider with a different name. New Features: - Added the 'pickup' delivery option at checkout. - Added the 'no delivery' option in the Store Admin ...Bundle Transformer - a modular extension for ASP.NET Web Optimization Framework: Bundle Transformer 1.6.10: Version: 1.6.10 Published: 11/18/2012 Now almost all of the Bundle Transformer's assemblies is signed (except BundleTransformer.Yui.dll); In BundleTransformer.SassAndScss the SassAndCoffee.Ruby library was replaced by my own implementation of the Sass- and SCSS-compiler (based on code of the SassAndCoffee.Ruby library version 2.0.2.0); In BundleTransformer.CoffeeScript added support of CoffeeScript version 1.4.0-3; In BundleTransformer.TypeScript added support of TypeScript version 0....ExtJS based ASP.NET 2.0 Controls: FineUI v3.2.0: +2012-11-18 v3.2.0 -?????????????????SelectedValueArray????????(◇?◆:)。 -???????????????????RecoverPropertiesFromJObject????(〓?〓、????、??、Vian_Pan)。 -????????????,?????????????,???SelectedValueArray???????(sam.chang)。 -??Alert.Show???????????(swtseaman)。 -???????????????,??Icon??IconUrl????(swtseaman)。 -?????????TimePicker(??)。 -?????????,??/res.axd?css=blue.css&v=1。 -????????,?????????????,???????。 -????MenuCheckBox(???????)。 -?RadioButton??AutoPostBack??。 -???????FCKEditor?????????...BugNET Issue Tracker: BugNET 1.2: Please read our release notes for BugNET 1.2: http://blog.bugnetproject.com/bugnet-1-2-has-been-released Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you will pollute the rating, and you won't get an answer.Paint.NET PSD Plugin: 2.2.0: Changes: Layer group visibility is now applied to all layers within the group. This greatly improves the visual fidelity of complex PSD files that have hidden layer groups. Layer group names are prefixed so that users can get an indication of the layer group hierarchy. (Paint.NET has a flat list of layers, so the hierarchy is flattened out on load.) The progress bar now reports status when saving PSD files, instead of showing an indeterminate rolling bar. Performance improvement of 1...CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1116.7): [IMPROVED] Detailed error message descriptions for FaultException [FIX] Fixed bug in rule CrmOfflineAccessStateRule which had incorrect State attribute name [FIX] Fixed bug in rule EntityPropertyRule which was missing PropertyValue attribute [FIX] Current connection information was not displayed in status bar while refreshing list of entitiesSuper Metroid Randomizer: Super Metroid Randomizer v5: v5 -Added command line functionality for automation purposes. -Implented Krankdud's change to randomize the Etecoon's item. NOTE: this version will not accept seeds from a previous version. The seed format has changed by necessity. v4 -Started putting version numbers at the top of the form. -Added a warning when suitless Maridia is required in a parsed seed. v3 -Changed seed to only generate filename-legal characters. Using old seeds will still work exactly the same. -Files can now be saved...Caliburn Micro: WPF, Silverlight, WP7 and WinRT/Metro made easy.: Caliburn.Micro v1.4: Changes This version includes many bug fixes across all platforms, improvements to nuget support and...the biggest news of all...full support for both WinRT and WP8. Download Contents Debug and Release Assemblies Samples Readme.txt License.txt Packages Available on Nuget Caliburn.Micro – The full framework compiled into an assembly. Caliburn.Micro.Start - Includes Caliburn.Micro plus a starting bootstrapper, view model and view. Caliburn.Micro.Container – The Caliburn.Micro invers...DirectX Tool Kit: November 15, 2012: November 15, 2012 Added support for WIC2 when available on Windows 8 and Windows 7 with KB 2670838 Cleaned up warning level 4 warningsDotNetNuke® Community Edition CMS: 06.02.05: Major Highlights Updated the system so that it supports nested folders in the App_Code folder Updated the Global Error Handling so that when errors within the global.asax handler happen, they are caught and shown in a page displaying the original HTTP error code Fixed issue that stopped users from specifying Link URLs that open on a new window Security FixesFixed issue in the Member Directory module that could show members to non authenticated users Fixed issue in the Lists modul...fastJSON: v2.0.10: - added MonoDroid projectNew Projects1121codeplex01: Today's task is to test portal on JapaneseAgileToDo: a to do list use wpf ef sqlce!Applay: Applay is a library that allows you to wrap authorization and validation around the services of your application layer by using a dynamic proxy.ArunimaErp: Enterprise Resource Planning Software for Arunima GroupBootCMS: BootCMS makes webdevelopment easy.codeplex01: I need go out for a whileCoding4Fun's Maelstrom: Introduced at //build/ 2012, Maelstrom is Coding4Fun's latest creation. Step up to the podium and battle against your opponent in full-on stereoscopic 3D!CTCS Project 2012: 11/21/2012 @ svn repository ctodo: TODO List Management Librarydeploy-with-ease: One-click deployment tool based on DrobBox files hostingDesign Resources .NET: D-R.NET is a set of pre-built implementations of oft-recurring application designs. D-R.NET saves considerable time and money in building user-focused applications: from basic to complex. DnfWeb: dnf??Dr.Peng: dr.peng ????????。DriveKeepAlive: Managed .NET service intended to keep external hard drives "awake" for immediate access. Developed in C# with Visual Studio 2008Ecommerce Platform: Ecommerce PlatformEventManagerReset: Project created for Reset meetings.FaceComparerDistributed: project of face compare distributed versionFileSystemExplorerExample: WPF MVVM Sample applicationFinlogiK ReSharper Contrib: FinlogiK ReSharper Contrib is a plugin for ReSharper 5.1 which adds code cleanup and inspection options for static qualifiers.Gestione Lampade Votive: Gestione dei canoni annuali dei loculi cimiteriali, con stampa di comunicazioni ai contribuenti e dei bollettini di conto corrente postale (a due o tre cedole).GI_PII: HABA BABA?GIV_P2: second projectHex o'clock: Projekt kolorowego zegara.IISProcessScheduler: Schedule processes from within IIS.Image Tagger & Resizer: Resize, and text in the lower right of picture with i.e. copyright information.IT Kohvik: ITK cafe school project.jean1121codeplex01: goodKooboo3 Helper: It's a developer tutorial code for kooboo cms v3. http://kooboo.codeplex.comMAVI: mobile application for the visually impaired: bill recognition & tag and recognize objects based on a specific stickerMecanismos de Segurança Interoperáveis para Serviços Web: Esse projeto pretende desenvolver um framework que forneça requisitos de segurança de forma interoperável através de Serviços Web. Metro UI For Windows Forms: Provides a set of controls and form templates for designing user interfaces based on a similar minimalist metro style. For those who love Windows Forms.NHSmartBootstrapper: In a "fast-changing" world, your LoB application needs to be ready to change as well. The usage of NHibernate Listeners together with smart application bootstrapping, even in a complex scenario, can lead to extensible and new-feature-ready applications. Office Add-In Monitor: Office Add-in Monitor protects add-ins from being disabled.Orchard Responsive Theme Machine: A responsive version of the Orchard CMS "Theme Machine" which is commonly used as a starting point for building custom themes. Supports many resolutions.Orchard Simple Contact Form: An Orchard CMS module that provides a simple contact form that sends an email. It can be used as either a content part or widget.Peon War: Peon war is a game where peons are fighting.Project Files Linker (VS Add-In): PFL project is used to generate multiple projects with links to the same files to achieve projects for different .NET FW versions.Quibbler - Universal News Reader: Quibbler is a product designed and developed by Indigo Architects. Quibbler is a desktop application which runs on user's machine and provides a intuitive user interface for reading news in offline mode. Quibbler is developed in WPF (.Net 3.5).Samcrypt: .SenchaTest: SenchaTestShared Genomics Project - Workbench Codebase: The Shared Genomics workbench enables a diverse user group of researchers to explore the associations between genetic and other factors in their datasets. It provides a graphical user interface to the analysis functions published in a sister Codeplex project i.e. MPI Codebase.SharePoint 2013 FBA Pack: This is the home of the SharePoint 2013 FBA Pack. The FBA Pack for SharePoint 2013 is currently in development and is coming soon.SharePoint Term Store PowerShell Backup & Restore Scripts: This project is focused on development of PowerShell script tools for backup and restore of SharePoint Managed Metadata service application Term Store taxonomy.SharpPlanets: A simple game completely designed and written in C#, inspired by JPlanets.SpaceShooter: A small hobbyist game. It is similar to the 2D Arcade shooter games.Stretched Background Image jQuery plugin: jQuery plugin for adding a stretched background image for any element in a web page. Uses an absolutely positioned image at z-index -1.Stsadm Templates for Visual Studio: The Stsadm Templates for Visual Studio 2005 and 2008 support you in making command extensions for SharePoint's commnand line tool stsadm.exe.SwissPost EasyTrack API: The SwissPost EasyTrack API allows you to track your parcels or letters everytime and in every application.System.Threading.Joins: The Joins project provides asynchronous concurrency semantics based on join calculus and modeled after the Microsoft Research C? (C Omega) project.T nagu Tetris: Meie versioon tuntud mängust tetris.testdd11202012tfs01: juktestddhg11202012hg01: stesttom11202012git02: fdsfdstesttom11202012hg01: gfdTetrissimus: Tetrissimus is an open source "Tetris" alike game totally written in DHTML (JavaScript, CSS and HTML) that uses keyboard. This cross-platform and cross-browser game was tested under BeOS, Linux, NetBSD, OpenBSD, FreeBSD, Windows and others.Thrift Client .NET for WinRT (Windows Store Apps): thrift .net client for WinRT applicationTwitter Bootstrap for SharePoint: A Masterpage for SharePoint 2010 including the twitter bootstrap front-end frameworkTX Spell .NET ActiveX Package: TX Spell .NET ActiveX Package enables you to add high-performance spell checking capabilities to your VB6 applications.USB ACCELEROMETER: This project is a test demo for usb accelerometer. Application plays music (mp3 file) while usb acc gives high values from its coordinate between interval.VfaAccoutApps: Cash Payment Application of Vf AsiaVisualPoint Use PowerPoint inside Visual Studio: VisualPoint lets you show PowerPoint presentations from inside Visual Studio. Future release will automate walkthroughs and presentations.VS2010 Rc1 Fix: Illustrates a fix for working with the ASAP.NET Wizard control with VS2010 RC1WebSite.Request: WebSite.Request launch web request (via XMLHTTP) on website. Use, for example, to make initial request to sharepoint URL and escape "slow first request" problem.WPF Checked ListBox: This is simple implementation of WPF Checked ListBoxWPortal: doing nothing. that's it. i just want to use the subversion management. XNA Capture the Flag for the Microsoft Zune: Capture the Flag is a 2d Capture the flag game made for the Zune platform using XNA 3.0 CTP. Players choose to join or start a network session in the main menu. When in game, the player uses left or right on the DPad to choose the team on which to play with. Once sides have been chosen the party leader presses the center button on the Dpad to start the game. Teams switch between offense and defense for a total of 4 rounds in each game. When the game is over the party leader simply presses th...XPS Indexer: Xps file indexing for Google Desktop

    Read the article

  • Virtual host is not working in Ubuntu 14 VPS using XAMPP 1.8.3

    - by viral4ever
    I am using XAMPP as server in ubuntu 14.04 VPS of digitalocean. I tried to setup virtual hosts. But it is not working and I am getting 403 error of access denied. I changed files too. My files with changes are /opt/lampp/etc/httpd.conf # # This is the main Apache HTTP server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://httpd.apache.org/docs/trunk/> for detailed information. # In particular, see # <URL:http://httpd.apache.org/docs/trunk/mod/directives.html> # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so 'log/access_log' # with ServerRoot set to '/www' will be interpreted by the # server as '/www/log/access_log', where as '/log/access_log' will be # interpreted as '/log/access_log'. # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path. If you point # ServerRoot at a non-local disk, be sure to specify a local disk on the # Mutex directive, if file-based mutexes are used. If you wish to share the # same ServerRoot for multiple httpd daemons, you will need to change at # least PidFile. # ServerRoot "/opt/lampp" # # Mutex: Allows you to set the mutex mechanism and mutex file directory # for individual mutexes, or change the global defaults # # Uncomment and change the directory if mutexes are file-based and the default # mutex file directory is not on a local disk or is not appropriate for some # other reason. # # Mutex default:logs # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the <VirtualHost> # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 12.34.56.78:80 Listen 80 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # LoadModule authn_file_module modules/mod_authn_file.so LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_anon_module modules/mod_authn_anon.so LoadModule authn_dbd_module modules/mod_authn_dbd.so LoadModule authn_socache_module modules/mod_authn_socache.so LoadModule authn_core_module modules/mod_authn_core.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_dbd_module modules/mod_authz_dbd.so LoadModule authz_core_module modules/mod_authz_core.so LoadModule authnz_ldap_module modules/mod_authnz_ldap.so LoadModule access_compat_module modules/mod_access_compat.so LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule auth_form_module modules/mod_auth_form.so LoadModule auth_digest_module modules/mod_auth_digest.so LoadModule allowmethods_module modules/mod_allowmethods.so LoadModule file_cache_module modules/mod_file_cache.so LoadModule cache_module modules/mod_cache.so LoadModule cache_disk_module modules/mod_cache_disk.so LoadModule socache_shmcb_module modules/mod_socache_shmcb.so LoadModule socache_dbm_module modules/mod_socache_dbm.so LoadModule socache_memcache_module modules/mod_socache_memcache.so LoadModule dbd_module modules/mod_dbd.so LoadModule bucketeer_module modules/mod_bucketeer.so LoadModule dumpio_module modules/mod_dumpio.so LoadModule echo_module modules/mod_echo.so LoadModule case_filter_module modules/mod_case_filter.so LoadModule case_filter_in_module modules/mod_case_filter_in.so LoadModule buffer_module modules/mod_buffer.so LoadModule ratelimit_module modules/mod_ratelimit.so LoadModule reqtimeout_module modules/mod_reqtimeout.so LoadModule ext_filter_module modules/mod_ext_filter.so LoadModule request_module modules/mod_request.so LoadModule include_module modules/mod_include.so LoadModule filter_module modules/mod_filter.so LoadModule substitute_module modules/mod_substitute.so LoadModule sed_module modules/mod_sed.so LoadModule charset_lite_module modules/mod_charset_lite.so LoadModule deflate_module modules/mod_deflate.so LoadModule mime_module modules/mod_mime.so LoadModule ldap_module modules/mod_ldap.so LoadModule log_config_module modules/mod_log_config.so LoadModule log_debug_module modules/mod_log_debug.so LoadModule logio_module modules/mod_logio.so LoadModule env_module modules/mod_env.so LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule cern_meta_module modules/mod_cern_meta.so LoadModule expires_module modules/mod_expires.so LoadModule headers_module modules/mod_headers.so LoadModule usertrack_module modules/mod_usertrack.so LoadModule unique_id_module modules/mod_unique_id.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule version_module modules/mod_version.so LoadModule remoteip_module modules/mod_remoteip.so LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_connect_module modules/mod_proxy_connect.so LoadModule proxy_ftp_module modules/mod_proxy_ftp.so LoadModule proxy_http_module modules/mod_proxy_http.so LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so LoadModule proxy_scgi_module modules/mod_proxy_scgi.so LoadModule proxy_ajp_module modules/mod_proxy_ajp.so LoadModule proxy_balancer_module modules/mod_proxy_balancer.so LoadModule proxy_express_module modules/mod_proxy_express.so LoadModule session_module modules/mod_session.so LoadModule session_cookie_module modules/mod_session_cookie.so LoadModule session_dbd_module modules/mod_session_dbd.so LoadModule slotmem_shm_module modules/mod_slotmem_shm.so LoadModule ssl_module modules/mod_ssl.so LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so LoadModule unixd_module modules/mod_unixd.so LoadModule dav_module modules/mod_dav.so LoadModule status_module modules/mod_status.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule info_module modules/mod_info.so LoadModule suexec_module modules/mod_suexec.so LoadModule cgi_module modules/mod_cgi.so LoadModule cgid_module modules/mod_cgid.so LoadModule dav_fs_module modules/mod_dav_fs.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule dir_module modules/mod_dir.so LoadModule actions_module modules/mod_actions.so LoadModule speling_module modules/mod_speling.so LoadModule userdir_module modules/mod_userdir.so LoadModule alias_module modules/mod_alias.so LoadModule rewrite_module modules/mod_rewrite.so <IfDefine JUSTTOMAKEAPXSHAPPY> LoadModule php4_module modules/libphp4.so LoadModule php5_module modules/libphp5.so </IfDefine> <IfModule unixd_module> # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User root Group www </IfModule> # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. [email protected] # ServerAdmin [email protected] # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # #ServerName www.example.com:@@Port@@ # XAMPP ServerName localhost # # Deny access to the entirety of your server's filesystem. You must # explicitly permit access to web content directories in other # <Directory> blocks below. # <Directory /> AllowOverride none Require all denied </Directory> # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "/opt/lampp/htdocs" <Directory "/opt/lampp/htdocs"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/trunk/mod/core.html#options # for more information. # #Options Indexes FollowSymLinks # XAMPP Options Indexes FollowSymLinks ExecCGI Includes # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # #AllowOverride None # since XAMPP 1.4: AllowOverride All # # Controls who can get stuff from this server. # Require all granted </Directory> # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # <IfModule dir_module> #DirectoryIndex index.html # XAMPP DirectoryIndex index.html index.html.var index.php index.php3 index.php4 </IfModule> # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ".ht*"> Require all denied </Files> # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog "logs/error_log" # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn <IfModule log_config_module> # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # CustomLog "logs/access_log" common # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # #CustomLog "logs/access_log" combined </IfModule> <IfModule alias_module> # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http://www.example.com/bar # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a <Directory> section to allow access to # the filesystem path. # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # ScriptAlias /cgi-bin/ "/opt/lampp/cgi-bin/" </IfModule> <IfModule cgid_module> # # ScriptSock: On threaded servers, designate the path to the UNIX # socket used to communicate with the CGI daemon of mod_cgid. # #Scriptsock logs/cgisock </IfModule> # # "/opt/lampp/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "/opt/lampp/cgi-bin"> AllowOverride None Options None Require all granted </Directory> <IfModule mime_module> # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig etc/mime.types # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi # XAMPP, since LAMPP 0.9.8: AddHandler cgi-script .cgi .pl # For type maps (negotiated resources): #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # # XAMPP AddType text/html .shtml AddOutputFilter INCLUDES .shtml </IfModule> # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # #MIMEMagicFile etc/magic # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # MaxRanges: Maximum number of Ranges in a request before # returning the entire resource, or one of the special # values 'default', 'none' or 'unlimited'. # Default setting is to accept 200 Ranges. #MaxRanges unlimited # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall may be used to deliver # files. This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # Defaults: EnableMMAP On, EnableSendfile Off # EnableMMAP off EnableSendfile off # Supplemental configuration # # The configuration files in the etc/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary. # Server-pool management (MPM specific) #Include etc/extra/httpd-mpm.conf # Multi-language error messages Include etc/extra/httpd-multilang-errordoc.conf # Fancy directory listings Include etc/extra/httpd-autoindex.conf # Language settings #Include etc/extra/httpd-languages.conf # User home directories #Include etc/extra/httpd-userdir.conf # Real-time info on requests and configuration #Include etc/extra/httpd-info.conf # Virtual hosts Include etc/extra/httpd-vhosts.conf # Local access to the Apache HTTP Server Manual #Include etc/extra/httpd-manual.conf # Distributed authoring and versioning (WebDAV) #Include etc/extra/httpd-dav.conf # Various default settings Include etc/extra/httpd-default.conf # Configure mod_proxy_html to understand HTML4/XHTML1 <IfModule proxy_html_module> Include etc/extra/proxy-html.conf </IfModule> # Secure (SSL/TLS) connections <IfModule ssl_module> # XAMPP <IfDefine SSL> Include etc/extra/httpd-ssl.conf </IfDefine> </IfModule> # # Note: The following must must be present to support # starting without SSL on platforms with no /dev/random equivalent # but a statically compiled-in mod_ssl. # <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> # XAMPP Include etc/extra/httpd-xampp.conf Include "/opt/lampp/apache2/conf/httpd.conf" I used command shown in this example. I used below lines to change and add group Add group "groupadd www" Add user to group "usermod -aG www root" Change htdocs group "chgrp -R www /opt/lampp/htdocs" Change sitedir group "chgrp -R www /opt/lampp/htdocs/mysite" Change htdocs chmod "chmod 2775 /opt/lampp/htdocs" Change sitedir chmod "chmod 2775 /opt/lampp/htdocs/mysite" And then I changed my vhosts.conf file # Virtual Hosts # # Required modules: mod_log_config # If you want to maintain multiple domains/hostnames on your # machine you can setup VirtualHost containers for them. Most configurations # use only name-based virtual hosts so the server doesn't need to worry about # IP addresses. This is indicated by the asterisks in the directives below. # # Please see the documentation at # <URL:http://httpd.apache.org/docs/2.4/vhosts/> # for further details before you try to setup virtual hosts. # # You may use the command line option '-S' to verify your virtual host # configuration. # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for all requests that do not # match a ServerName or ServerAlias in any <VirtualHost> block. # <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "/opt/lampp/docs/dummy-host.example.com" ServerName dummy-host.example.com ServerAlias www.dummy-host.example.com ErrorLog "logs/dummy-host.example.com-error_log" CustomLog "logs/dummy-host.example.com-access_log" common </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "/opt/lampp/docs/dummy-host2.example.com" ServerName dummy-host2.example.com ErrorLog "logs/dummy-host2.example.com-error_log" CustomLog "logs/dummy-host2.example.com-access_log" common </VirtualHost> NameVirtualHost * <VirtualHost *> ServerAdmin [email protected] DocumentRoot "/opt/lampp/htdocs/mysite" ServerName mysite.com ServerAlias mysite.com ErrorLog "/opt/lampp/htdocs/mysite/errorlogs" CustomLog "/opt/lampp/htdocs/mysite/customlog" common <Directory "/opt/lampp/htdocs/mysite"> Options Indexes FollowSymLinks Includes ExecCGI AllowOverride All Order Allow,Deny Allow from all Require all granted </Directory> </VirtualHost> but still its not working and I am getting 403 error on my ip and domain however I can access phpmyadmin. If anyone can help me, please help me.

    Read the article

  • 7u10: JavaFX packaging tools update

    - by igor
    Last weeks were very busy here in Oracle. JavaOne 2012 is next week. Come to see us there! Meanwhile i'd like to quickly update you on recent developments in the area of packaging tools. This is an area of ongoing development for the team, and we are  continuing to refine and improve both the tools and the process. Thanks to everyone who shared experiences and suggestions with us. We are listening and fixed many of reported issues. Please keep them coming as comments on the blog or (even better) file issues directly to the JIRA. In this post i'll focus on several new packaging features added in JDK 7 update 10: Self-Contained Applications: Select Java Runtime to bundle Self-Contained Applications: Create Package without Java Runtime Self-Contained Applications: Package non-JavaFX application Option to disable proxy setup in the JavaFX launcher Ability to specify codebase for WebStart application Option to update existing jar file Self-Contained Applications: Specify application icon Self-Contained Applications: Pass parameters on the command line All these features and number of other important bug fixes are available in the developer preview builds of JDK 7 update 10 (build 8 or later). Please give them a try and share your feedback! Self-Contained Applications: Select Java Runtime to bundle Packager tools in 7u6 assume current JDK (based on java.home property) is the source for embedded runtime. This is useful simplification for many scenarios but there are cases where ability to specify what to embed explicitly is handy. For example IDE may be using fixed JDK to build the project and this is not the version you want to bundle into your application. To make it more flexible we now allow to specify location of base JDK explicitly. It is optional and if you do not specify it then current JDK will be used (i.e. this change is fully backward compatible). New 'basedir' attribute was added to <fx:platform> tag. Its value is location of JDK to be used. It is ok to point to either JRE inside the JDK or JDK top level folder. However, it must be JDK and not JRE as we need other JDK tools for proper packaging and it must be recent version of JDK that is bundled with JavaFX (i.e. Java 7 update 6 or later). Here are examples (<fx:platform> is part of <fx:deploy> task): <fx:platform basedir="${java.home}"/> <fx:platform basedir="c:\tools\jdk7"/> Hint: this feature enables you to use packaging tools from JDK 7 update 10 (and benefit from bug fixes and other features described below) to create application package with bundled FCS version of JRE 7 update 6. Self-Contained Applications: Create Package without Java Runtime This may sound a bit puzzling at first glance. Package without embedded Java Runtime is not really self-contained and obviously will not help with: Deployment on fresh systems. JRE need to be installed separately (and this step will require admin permissions). Possible compatibility issues due to updates of system runtime. However, these packages are much much smaller in size. If download size matters and you are confident that user have recommended system JRE installed then this may be good option to consider if you want to improve user experience for install and launch. Technically, this is implemented as an extension of previous feature. Pass empty string as value for 'basedir' attribute and this will be treated as request to not bundle Java runtime, e.g. <fx:platform basedir=""/> Self-Contained Applications: Package non-JavaFX application One of popular questions people ask about self-contained applications - can i package my Java application as self-contained application? Absolutely. This is true even for tools shipped with JDK 7 update 6. Simply follow steps for creating package for Swing application with integrated JavaFX content and they will work even if your application does not use JavaFX. What's wrong with it? Well, there are few caveats: bundle size is larger because JavaFX is bundled whilst it is not really needed main application jar needs to be packaged to comply to JavaFX packaging requirements(and this may be not trivial to achieve in your existing build scripts) javafx application launcher may not work well with startup logic of your application (for example launcher will initialize networking stack and this may void custom networking settings in your application code) In JDK 7 update 6 <fx:deploy> was updated to accept arbitrary executable jar as an input. Self-contained application package will be created preserving input jar as-is, i.e. no JavaFX launcher will be embedded. This does not help with first point above but resolves other two. More formally following assertions must be true for packaging to succeed: application can be launched as "java -jar YourApp.jar" from the command line  mainClass attribute of <fx:application> refers to application main class <fx:resources> lists all resources needed for the application To give you an example lets assume we need to create a bundle for application consisting of 3 jars:     dist/javamain.jar     dist/lib/somelib.jar    dist/morelibs/anotherlib.jar where javamain.jar has manifest with      Main-Class: app.Main     Class-Path: lib/somelib.jar morelibs/anotherlib.jar Here is sample ant code to package it: <target name="package-bundle"> <taskdef resource="com/sun/javafx/tools/ant/antlib.xml" uri="javafx:com.sun.javafx.tools.ant" classpath="${javafx.tools.ant.jar}"/> <fx:deploy nativeBundles="all" width="100" height="100" outdir="native-packages/" outfile="MyJavaApp"> <info title="Sample project" vendor="Me" description="Test built from Java executable jar"/> <fx:application id="myapp" version="1.0" mainClass="app.Main" name="MyJavaApp"/> <fx:resources> <fx:fileset dir="dist"> <include name="javamain.jar"/> <include name="lib/somelib.jar"/> <include name="morelibs/anotherlib.jar"/> </fx:fileset> </fx:resources> </fx:deploy> </target> Option to disable proxy setup in the JavaFX launcher Since JavaFX 2.2 (part of JDK 7u6) properly packaged JavaFX applications  have proxy settings initialized according to Java Runtime configuration settings. This is handy for most of the application accessing network with one exception. If your application explicitly sets networking properties (e.g. socksProxyHost) then they must be set before networking stack is initialized. Proxy detection will initialize networking stack and therefore your custom settings will be ignored. One way to disable proxy setup by the embedded JavaFX launcher is to pass "-Djavafx.autoproxy.disable=true" on the command line. This is good for troubleshooting (proxy detection may cause significant startup time increases if network is misconfigured) but not really user friendly. Now proxy setup will be disabled if manifest of main application jar has "JavaFX-Feature-Proxy" entry with value "None". Here is simple example of adding this entry using <fx:jar> task: <fx:jar destfile="dist/sampleapp.jar"> <fx:application refid="myapp"/> <fx:resources refid="myresources"/> <fileset dir="build/classes"/> <manifest> <attribute name="JavaFX-Feature-Proxy" value="None"/> </manifest> </fx:jar> Ability to specify codebase for WebStart application JavaFX applications do not need to specify codebase (i.e. absolute location where application code will be deployed) for most of real world deployment scenarios. This is convenient as application does not need to be modified when it is moved from development to deployment environment. However, some developers want to ensure copies of their application JNLP file will redirect to master location. This is where codebase is needed. To avoid need to edit JNLP file manually <fx:deploy> task now accepts optional codebase attribute. If attribute is not specified packager will generate same no-codebase files as before. If codebase value is explicitly specified then generated JNLP files (including JNLP content embedded into web page) will use it.  Here is an example: <fx:deploy width="600" height="400" outdir="Samples" codebase="http://localhost/codebaseTest" outfile="TestApp"> .... </fx:deploy> Option to update existing jar file JavaFX packaging procedures are optimized for new application that can use ant or command line javafxpackager utility. This may lead to some redundant steps when you add it to your existing build process. One typical situation is that you might already have a build procedure that produces executable jar file with custom manifest. To properly package it as JavaFX executable jar you would need to unpack it and then use javafxpackager or <fx:jar> to create jar again (and you need to make sure you pass all important details from your custom manifest). We added option to pass jar file as an input to javafxpackager and <fx:jar>. This simplifies integration of JavaFX packaging tools into existing build  process as postprocessing step. By the way, we are looking for ways to simplify this further. Please share your suggestions! On the technical side this works as follows. Both <fx:jar> and javafxpackager will attempt to update existing jar file if this is the only input file. Update process will add JavaFX launcher classes and update the jar manifest with JavaFX attributes. Your custom attributes will be preserved. Update could be performed in place or result may be saved to a different file. Main-Class and Class-Path elements (if present) of manifest of input jar file will be used for JavaFX application  unless they are explicitly overriden in the packaging command you use. E.g. attribute mainClass of <fx:application> (or -appclass in the javafxpackager case) overrides existing Main-Class in the jar manifest. Note that class specified in the Main-Class attribute could either extend JavaFX Application or provide static main() method. Here are examples of updating jar file using javafxpackager: Create new JavaFX executable jar as a copy of given jar file javafxpackager -createjar -srcdir dist -srcfiles fish_proto.jar -outdir dist -outfile fish.jar  Update existing jar file to be JavaFX executable jar and use test.Fish as main application class javafxpackager -createjar -srcdir dist -appclass test.Fish -srcfiles fish.jar -outdir dist -outfile fish.jar  And here is example of using <fx:jar> to create new JavaFX executable jar from the existing fish_proto.jar: <fx:jar destfile="dist/fish.jar"> <fileset dir="dist"> <include name="fish_proto.jar"/> </fileset> </fx:jar> Self-Contained Applications: Specify application icon The only way to specify application icon for self-contained application using tools in JDK 7 update 6 is to use drop-in resources. Now this bug is resolved and you can also specify icon using <fx:icon> tag. Here is an example: <fx:deploy ...> <fx:info> <fx:icon href="default.png"/> </fx:info> ... </fx:deploy> Few things to keep in mind: Only default kind of icon is applicable to self-contained applications (as of now) Icon should follow platform specific rules for sizes and image format (e.g. .ico on Windows and .icns on Mac) Self-Contained Applications: Pass parameters on the command line JavaFX applications support two types of application parameters: named and unnamed (see the API for Application.Parameters). Static named parameters can be added to the application package using <fx:param> and unnamed parameters can be added using <fx:argument>. They are applicable to all execution modes including standalone applications. It is also possible to pass parameters to a JavaFX application from a Web page that hosts it, using <fx:htmlParam>.  Prior to JavaFX 2.2, this was only supported for embedded applications. Starting from JavaFX 2.2, <fx:htmlParam> is applicable to Web Start applications also. See JavaFX deployment guide for more details on this. However, there was no way to pass dynamic parameters to the self-contained application. This has been improved and now native launchers will  delegate parameters from command line to the application code. I.e. to pass parameter to the application you simply need to run it as "myapp.exe somevalue" and then use getParameters().getUnnamed().get(0) to get "somevalue".

    Read the article

  • CodePlex Daily Summary for Friday, June 03, 2011

    CodePlex Daily Summary for Friday, June 03, 2011Popular ReleasesMedia Companion: MC 3.404b Weekly: Extract the entire archive to a folder which has user access rights, eg desktop, documents etc. Refer to the documentation on this site for the Installation & Setup Guide Important! *** Due to an issue where the date added & the full genre information was not being read into the Movie cache, it is highly recommended that you perform a Rebuild Movies when first running this latest version. This will read in the information from the nfo's & repopulate the cache used by MC during operation. Fi...Terraria Map Generator: TerrariaMapTool 1.0.0.4 Beta: 1) Fixed the generated map.html file so that the file:/// is included in the base path. 2) Added the ability to use parallelization during generation. This will cause the program to use as many threads as there are physical cores. 3) Fixed some background overdraw.DotRas: DotRas v1.2 (Version 1.2.4168): This release includes compiled (and signed) versions of the binaries, PDBs, CHM help documentation, along with both C# and VB.NET examples. Please don't forget to rate the release! If you find a bug, please open a work item and give as much description as possible. Stack traces, which operating system(s) you're targeting, and build type is also very helpful for bug hunting. If you find something you believe to be a bug but are not sure, create a new discussion on the discussions board. Thank...Ajax Minifier: Microsoft Ajax Minifier 4.21: Fixed issues #15949 and #15868. Tweaked output in multi-line (pretty-print) mode so that var-statements in the initializer of for-statements break multiple variables onto multiple lines. Added TreeModification flag (and can now therefore turn off) the behavior of removing quotes around object literal property names if the names can be valid identifiers. Convert true literals to !0 and false literals to !1. Added a Visitor class approach to iterating over a generated abstract syntax tree to he...Caliburn Micro: WPF, Silverlight and WP7 made easy.: Caliburn.Micro v1.1 RTW: Download ContentsDebug and Release Assemblies Samples Changes.txt License.txt Release Highlights For WP7A new Tombstoning API based on ideas from Fluent NHibernate A new Launcher/Chooser API Strongly typed Navigation SimpleContainer included The full phone lifecycle is made easy to work with ie. we figure out whether your app is actually Resurrecting or just Continuing for you For WPFSupport for the Client Profile Better support for WinForms integration All PlatformsA power...VidCoder: 0.9.1: Added color coding to the Log window. Errors are highlighted in red, HandBrake logs are in black and VidCoder logs are in dark blue. Moved enqueue button to the right with the other control buttons. Added logic to report failures when errors are logged during the encode or when the encode finishes prematurely. Added Copy button to Log window. Adjusted audio track selection box to always show the full track name. Changed encode job progress bar to also be colored yellow when the enco...AutoLoL: AutoLoL v2.0.1: - Fixed a small bug in Auto Login - Fixed the updaterEPPlus-Create advanced Excel 2007 spreadsheets on the server: EPPlus 2.9.0.1: EPPlus-Create advanced Excel 2007 spreadsheets on the server This version has been updated to .Net Framework 3.5 New Features Data Validation. PivotTables (Basic functionalliy...) Support for worksheet data sources. Column, Row, Page and Data fields. Date and Numeric grouping Build in styles. ...and more And some minor new features... Ranges Text-Property|Get the formated value AutofitColumns-method to set the column width from the content of the range LoadFromCollection-metho...jQuery ASP.Net MVC Controls: Version 1.4.0.0: Version 1.4.0.0 contains the following additions: Upgraded to MVC 3.0 Upgraded to jQuery 1.6.1 (Though the project supports all jQuery version from 1.4.x onwards) Upgraded to jqGrid 3.8 Better Razor View-Engine support Better Pager support, includes support for custom pagers Added jqGrid toolbar buttons support Search module refactored, with full suport for multiple filters and ordering And Code cleanup, bug-fixes and better controller configuration support.Nearforums - ASP.NET MVC forum engine: Nearforums v6.0: Version 6.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: Authentication using Membership Provider for SQL Server and MySql Spam prevention: Flood Control Moderation: Flag messages Content management: Pages: Create pages (about us/contact/texts) through web administration Allow nearforums to run as an IIS subapp Migrated Facebook Connect to OAuth 2.0 Visit the project Roadmap for more details.NetOffice - The easiest way to use Office in .NET: NetOffice Release 0.8b: Changes: - fix critical issue 15922(AccessViolationException) once and for all ...update is strongly recommended Known Issues: - some addin ribbon examples has a COM Register function with missing codebase entry(win32 registry) ...the problem is only affected to c# examples. fixed in latest source code. NetOffice\ReleaseTags\NetOffice Release 0.8.rar Includes: - Runtime Binaries and Source Code for .NET Framework:......v2.0, v3.0, v3.5, v4.0 - Tutorials in C# and VB.Net:...................Facebook Graph Toolkit: Facebook Graph Toolkit 1.5.4186: Updates the API in response to Facebook's recent change of policy: All Graph Api accessing feeds or posts must provide a AccessToken.Serviio for Windows Home Server: Beta Release 0.5.2.0: Ready for widespread beta. Synchronized build number to Serviio version to avoid confusion.AcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta4: ??AcDown?????????????,??????????????,????、????。?????Acfun????? ????32??64? Windows XP/Vista/7 ????????????? ??:????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64),?????"?????????"??? ??v3.0 Beta4 2011-5-31?? ???Bilibili.us????? ???? ?? ???"????" ???Bilibili.us??? ??????? ?? ??????? ?? ???????? ?? ?? ???Bilibili.us?????(??????????????????) ??????(6.cn)?????(????) ?? ?????Acfun?????????? ?????????????? ???QQ???????? ????????????Discussion...CodeCopy Auto Code Converter: Code Copy v0.1: Full add-in, setup project source code and setup fileWordpress Theme 'Windows Metro': v1.00.0017: v1.00.0017 Dies ist eine Vorab-Version aus der Entwickler-Phase. This is a preview version from the development phase.TerrariViewer: TerrariViewer v2.4.1: Added Piggy Bank editor and fixed some minor bugs.Kooboo CMS: Kooboo CMS 3.02: Updated the Kooboo_CMS.zip at 2011-06-02 11:44 GMT 1.Fixed: Adding data rule issue on page. 2.Fixed: Caching issue for higher performance. Updated the Kooboo_CMS.zip at 2011-06-01 10:00 GMT 1. Fixed the published package throwed a compile error under WebSite mode. 2. Fixed the ContentHelper.NewMediaFolderObject return TextFolder issue. 3. Shorten the name of ContentHelper API. NewMediaFolderObject=>MediaFolder, NewTextFolderObject=> TextFolder, NewSchemaObject=>Schema. Also update the C...mojoPortal: 2.3.6.6: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2366-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Terraria World Creator: Terraria World Creator: Version 1.01 Fixed a bug that would cause the application to crash. Re-named the Application.New Projects"Background Transfer Service Sample" From WP7 Sample: This project is an extension to existing Windows Phone7 sample available from MS sight ("Background Transfer Service Sample"). This project extends functionality to display the background downloaded item to verify download conten. Agile project and development management dashboard - Meter Console: Agile project and development management dashboard application. The focus of this application to bridge the gap between the management, clients and developer and chive best possible transparency. Ajax Multi-ListBox: Ajax Multi-ListBox is .NET C# written user control with a dual listbox that uses ajax to move items from left to right and vice versa.aLOG : Asynchronous logging (Logging Library): aLog is an asynchronous logging component built on Microsoft Enterprise Exception handling and Logging Component block. It allows application to asynchronously log the data in multiple data sources such as file system, database , XML. Application Base Component Library: Application Base Component LibraryConcise Service Bus: A compact but comprehensive WCF service bus framework.Contour provider for Umbraco Courier: Transfer Umbraco Contour forms between Umbraco instances with Courier.CoveyNet MidWest: CoveyNet MidWestCSharp Samples: This contain C#- wpf, wcf, linqtosql, some basic oops stuff etc.DotNet1: DotNet1FireWeb: fefaesfrafasGeoCoder: Basic server side GeoCoder which accesses Google, YAHOO etc. This is developed in C# and is a mix of language styles, just depended what I was doing that week. All the libraries include tests which can be used to check if the libraries still work, it's worth doing this as the consumed webservices may change from time to time. GrandReward: GrandReward is designed to help young and old people to learn by answer questions. It is easy to use and the community can design own topic files for own questions to learn. The project is develop in C# and contains some WPF views. The project homepage is: http://grand-reward.com/helferlein: The helferlein library contains some web controls and tools I used in other projects.helferlein_BabelFish: helferlein_BabelFish is a DNN module to support multilingual features for other helferlein modules. It is developed in C#.helferlein_Form: helferlein_Form is an easy-to-use module for DotNetNuke that allows creating forms. The submissions can be sent by e-mail and/or stored in a database. It's developed in C#.ILSpy/Silverlight — Proof Of Concept: ILSpy refactoring (dire hacking) to make it work in Silverlight.ISGProject: ISGProjectMarcelo Rocha: Trabalhos acadêmicos, Apresentações, Projetos e outras Invencionices de Marcelo Rocha.MosquitoOnline: MosquitoOnline ProjectNET.Studio: Ein kleines Visual Studio für die SchuleOmegle Desktop Client: A desktop client for the anonymous chat site, Omegle. Designed to combat some of the shortcomings of the webpage, the desktop client will have no adverts, and be able to flash the taskbar window, and play a sound on message received. Online PHP IDE: Free Open Source online editor for working with files on FTP. Free and easy deployment.Open JGL: A utillity library using OpenGL, which focus' on graphics and vertex control.Open Tokenization Server: Open Tokenization Server is a simplistic implementation of a tokenization data security service. It allows users to create and retrieve tokens that represent sensitive information.OurCodeNights: Just some small projects we "work" on at our codenights. A good excuse to meet and have a good time ;)Raple: Raple is simple programming languageSea: Set of C# Extension libraries that make life easier.Shai Chi: Shai ChiSharePoint Sandbox Logging: SharePoint Sandbox Logging enables developers and solution designers to easily log events to logging list in your site collection, allowing you to easily trace errors on custom solutions within your site collection, with no need for server access. Perfect for sandbox / Office365. This project contains one sandbox solution with a site collection logging feature. When feature is active - it creates the list and logs. If it is not active - it does not log. Simple. It also contains a sampl...SharePoint Stock Ticker: SharePoint Stock Ticker is a SharePoint 2010 project which consists of a SharePoint Stock Ticker Web Part driven off of Google's Stock API. The width of this Web Part was developed to fit within the default SharePoint 2010 Quick Launch navigation. This has also been tested to run over http and https SharePoint 2010 farms and will not throw a mixed content warning with Internet Explorer.SharpLinx: SharpLinx is an open source social networking application on ASP.Net.Single.Net - less Copy & Paste,less code lines,more easier: make your code life easierSqlMyAdmin: A projecto to create a PHPMyAdmin clone app that access Sql Server.TDB: TDB is a NOSQL Key-value store entirely designed to run in windows environment. It's directly inspired by Redis project and use Redis' command sematincs and Redis' communication protocol to maintain a base compatibility with it.Tomasulo: A simulator of Tomasulo CDB dynamic instruction scheduling algorithm in Java. Authors: Mengyu Zhou @J85 Zhenyao Zhu @J85 Jun Li @J81 @Tsinghua UniversityTransport Broker Management System: Transport Management system will serve the small freight brokers manage the carriers and orders. It has features like manage truck owners, carriers, source, destination, orders. Verification system for MCBS: Verification system for mobile communication base station.VietCard: VietCardVkontakte File converter: ????????? ?????? ??? ???????? ?? ? "?????????" vkontakte.ru. VSGesture for Visual Studio: VSGesture can execute command via mouse gestures within Visual Studio2010. If you have any feedback, please send me an email to powerumc at gmail.com.WCF-Silverlight Helper: Class library to generate WCF DataContractSerializer-serializable and Silverlight (SL) -compatible classes. Useful, for example, if you have an assembly with classes that fail to serialize with DataContractSerializer. T4 Templates are used to auto-generate code.Windows Phone eBook Samples: Windows Phone eBook Samples is a collection of samples associated with the Windows Phone eBoom community initiative.WinPreciousMetal: WinPreciousMetal helps people know the precious metal's states. Because I am a Chinese, my soft mainly focus at the price of metal in RMB.

    Read the article

  • CodePlex Daily Summary for Friday, November 19, 2010

    CodePlex Daily Summary for Friday, November 19, 2010Popular ReleasesSQL Server CLR Function for Address Correction and Geocoding: Release 2.0: Release 2.0. New User Defined Function fields added.MiniTwitter: 1.58: MiniTwitter 1.58 ???? ?? ??????????????????、????????????????????????LateBindingApi.Excel: LateBindingApi.Excel Release 0.7d: Release+Samples V0.7: - Enthält Laufzeit DLL und Beispielprojekte Beispielprojekte: COMAddinExample - Demonstriert ein versionslos angebundenes COMAddin Example01 - Background Colors und Borders für Cells Example02 - Font Attributes undAlignment für Cells Example03 - Numberformats Example04 - Shapes, WordArts, Pictures, 3D-Effects Example05 - Charts Example06 - Dialoge in Excel Example07 - Einem Workbook VBA Code hinzufügen Example08 - Events Example09 - Eigene Gui Elemente erstellen und Ere...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.6.4 Released: Hi, Today we are releasing Visifire 3.6.4 with few bug fixes: * Multi-line Labels were getting clipped while exploding last DataPoint in Funnel and Pyramid chart. * ClosestPlotDistance property in Axis was not behaving as expected. * In DateTime Axis, Chart threw exception on mouse click over PlotArea if there were no DataPoints present in Chart. * ToolTip was not disappearing while changing the DataSource property of the DataSeries at real-time. * Chart threw exception ...Opalis Community Releases: Opalis Architecture and Workflow Deployment Docs: Opalis Architecture & Workflow Deployment Process Documentation The Opalis Architecture & Workflow Deployment Process Documentation includes two documents (for presentation purposes only, one is a DOCX with and embedded Visio diagram and the other is a PDF). The documentation is here as a "Best Practice Guide". The phrase "Best Practice Guide" is in quotes because this is an UNOFFICIAL example of an Opalis Architecture as well as an UNOFFICIAL example of a Workflow Deployment Process. The int...Sexy Select: sexyselect.0.2: Review index.html inside the source code for a working demoMicrosoft SQL Server Product Samples: Database: AdventureWorks 2008R2 SR1: Sample Databases for Microsoft SQL Server 2008R2 (SR1)This release is dedicated to the sample databases that ship for Microsoft SQL Server 2008R2. See Database Prerequisites for SQL Server 2008R2 for feature configurations required for installing the sample databases. See Installing SQL Server 2008R2 Databases for step by step installation instructions. The SR1 release contains minor bug fixes to the installer used to create the sample databases. There are no changes to the databases them...VidCoder: 0.7.2: Fixed duplicated subtitles when running multiple encodes off of the same title.Razor Templating Engine: Razor Template Engine v1.1: Release 1.1 Changes: ADDED: Signed assemblies with strong name to allow assemblies to be referenced by other strongly-named assemblies. FIX: Filter out dynamic assemblies which causes failures in template compilation. FIX: Changed ASCII to UTF8 encoding to support UTF-8 encoded string templates. FIX: Corrected implementation of TemplateBase adding ITemplate interface.Prism Training Kit: Prism Training Kit - 1.1: This is an updated version of the Prism training Kit that targets Prism 4.0 and fixes the bugs reported in the version 1.0. This release consists of a Training Kit with Labs on the following topics Modularity Dependency Injection Bootstrapper UI Composition Communication Note: Take into account that this is a Beta version. If you find any bugs please report them in the Issue Tracker PrerequisitesVisual Studio 2010 Microsoft Word 2007/2010 Microsoft Silverlight 4 Microsoft S...Craig's Utility Library: Craig's Utility Library Code 2.0: This update contains a number of changes, added functionality, and bug fixes: Added transaction support to SQLHelper. Added linked/embedded resource ability to EmailSender. Updated List to take into account new functions. Added better support for MAC address in WMI classes. Fixed Parsing in Reflection class when dealing with sub classes. Fixed bug in SQLHelper when replacing the Command that is a select after doing a select. Fixed issue in SQL Server helper with regard to generati...MFCMAPI: November 2010 Release: Build: 6.0.0.1023 Full release notes at SGriffin's blog. If you just want to run the tool, get the executable. If you want to debug it, get the symbol file and the source. The 64 bit build will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit build, regardless of the operating system. Facebook BadgeDotNetNuke® Community Edition: 05.06.00: Major HighlightsAdded automatic portal alias creation for single portal installs Updated the file manager upload page to allow user to upload multiple files without returning to the file manager page. Fixed issue with Event Log Email Notifications. Fixed issue where Telerik HTML Editor was unable to upload files to secure or database folder. Fixed issue where registration page is not set correctly during an upgrade. Fixed issue where Sendmail stripped HTML and Links from emails...mVu Mobile Viewer: mVu Mobile Viewer 0.7.10.0: Tube8 fix.EPPlus-Create advanced Excel 2007 spreadsheets on the server: EPPlus 2.8.0.1: EPPlus-Create advanced Excel 2007 spreadsheets on the serverNew Features Improved chart support Different chart-types series on the same chart Support for secondary axis and a lot of new properties Better styling Encryption and Workbook protection Table support Import csv files Array formulas ...and a lot of bugfixesAutoLoL: AutoLoL v1.4.2: Added support for more clients (French and Russian) Settings are now stored sepperatly for each user on a computer Auto Login is much faster now Auto Login detects and handles caps lock state properly nowTailspinSpyworks - WebForms Sample Application: TailspinSpyworks-v0.9: Contains a number of bug fixes and additional tutorial steps as well as complete database implementation details.ASP.NET MVC Project Awesome (rich jQuery AJAX helpers): 1.3 and demos: a library with mvc helpers and a demo project that demonstrates an awesome way of doing asp.net mvc. tested on mozilla, safari, chrome, opera, ie 9b/8/7/6 new stuff in 1.3 Autocomplete helper Autocomplete and AjaxDropdown can have parentId and be filled with data depending on the value of the parent PopupForm besides Content("ok") on success can also return Json(data) and use 'data' in a client side function Awesome demo improved (cruder, builder, added service layer)UltimateJB: UltimateJB 2.01 PL3 KakaRoto + PSNYes by EvilSperm: Voici une version attendu avec impatience pour beaucoup : - La Version PSNYes pour pouvoir jouer sur le PSN avec une PS3 Jailbreaker. - Pour l'instant le PSNYes n'est disponible qu'avec les PS3 en firmwares 3.41 !!! - La version PL3 KAKAROTO intégre ses dernières modification et prépare a l'intégration du Firmware 3.30 !!! Conclusion : - UltimateJB PSNYes => Valide l'utilisation du PSN : Uniquement compatible avec les 3.41 - ultimateJB DEFAULT => Pas de PSN mais disponible pour les PS3 sui...Fluent Ribbon Control Suite: Fluent Ribbon Control Suite 2.0: Fluent Ribbon Control Suite 2.0(supports .NET 4.0 RTM and .NET 3.5) Includes: Fluent.dll (with .pdb and .xml) Showcase Application Samples (only for .NET 4.0) Foundation (Tabs, Groups, Contextual Tabs, Quick Access Toolbar, Backstage) Resizing (ribbon reducing & enlarging principles) Galleries (Gallery in ContextMenu, InRibbonGallery) MVVM (shows how to use this library with Model-View-ViewModel pattern) KeyTips ScreenTips Toolbars ColorGallery NEW! *Walkthrough (documenta...New ProjectsALARM - ALert Application for Resource Managers: ALert Application for Resource ManagersAmino: Amino coming soon. A very dynamic MVVM application environment. More details to follow.ASDF-CRM: A Cleanly Designed CRM system based on .Net4 technologies with Silverlight GUI.Auto Slideshow with description: Auto Slideshow with image description targeted for webpage banners or website introduction. This is developed in XAML and C# using stroryboard and defining the timelines. This is a Silverlight 4 application. Can be resized depending on your requirements. Base De Datos: proyecto de base de datosBesteam Developments Safe Driving: School project developed with Visual Studio 2010, C# 4.0 and .NET 4.0BizTalk Mapper Extensions UtilityPack: BizTalk Mapper Extensions UtilityPack is a set of libraries with several useful functoids to include and use it in a map, which will provide an extension of BizTalk Mapper capabilities.BlogEngine Additions (Widgets,Extensions,Custom Code): Additions and custom code for BlogEngine. Widgets Extensions Custom code that can't be use in Widgets or Extenstions Equals Verifier .Net: Equals Verifier .Net is a small library to verify if classes implement Equals according to msdn guidelines.ERPSia: Proyecto de SIA TecFalafel Solution Rename Script: The Falafel Software Solution Rename PowerShell Script makes it easy to reuse an existing solution/project by performing a global rename. If you have a solution named ExampleSolution and want to reuse it as WidgetSolution, this script will rename everything for you.fOrganiz: This application allows you to automatically organize by date in specific subdirectories your picturesGEChecker: GEChecker makes it easier for you to view your RuneScape Grand Exchange offers whilst offline. It's developed in VB.NetHBUIMIS: HBUIMISHospital Management: 3 -tier architectinterpool: proyecto interpool - pis 2010 loud tweets: loud tweetsLuminous: Luminous library consists of various .NET components, controls and classes which make programming easier: WPF and Windows Forms TaskDialog (previously VDialog), Simple Popup Control, Glass Button, Linq to CSS, Linq to XHTML and various useful classes and extension methods.MailMonitr: MailMonitr helps improve email push notifications to your iPhone by using Prowl to deliver notifications, instead of the default "ding." Prowl has the ability to set "quiet hours." Also, a summery of unread messages is displayed on the lock screen for each push notification.MemoryGames: TODOMiko Ling's Open Source Projects: Open SourceMSCRM - Duplicate Checker - Plugin: Plugin to handle real-time Duplicate Checking and Constraining on any Int attribute specified. I use this to prevent service calls that are creating entities from creating duplicates. The external systems making the service calls use int as the primary key.MyTestProject: Test net projectNellen.dk: Det kan blive meget vildere....Orange Library: Orange LibraryRateIt: Rating plugin for jQuery RTL support, Progressive enhancement, Unobtrusive javascript (using HTML5 data-* attributes), supports as many stars as you'd like, and also any step size.RDPAddins .NET: With RDPAddins .NET framework you can build rdp channel addins in your favourite .NET languageREMS - Real State Management System based on ASP.NET 4.0: real state management system based on ASP.NET 4.0Repository of pan: My source code repository. record my idea and test code here. SharePoint Log Investigation Tool (SPLIT): SPLIT makes searching SharePoint logs easy. SQL Monitor: monitor sql server processes and jobs, view executing sql query, kill process / stop jobTestCodePlexForMe: TestCodePlexForMeweibo wp7 client: It's a project to create a windows phone 7 client for sina weibo, which is http://t.sina.com.cnWM2Day: WM2Day is a Windows Mobile (both Smartphone and PDA) client for Me2day.net, the Korean micro-blogging service.X10Dispatcher: Interface for automating x10 cm15a home automation powerline control unit. Requires physical cm15a control unit connected to computer running this program. Extends remote monitoring and automation of computer activities based on sensors and events.XNA 2D Particle Engine: XNA 2D Particle Engine is a flexible, extensible particle engine written in XNA Game Studio 4.0. The engine can emit texture-based particles in almost anyway you like and can easily be integrated as a (drawable) Game component in your XNA Game Studio 4.0 projects.

    Read the article

  • CodePlex Daily Summary for Saturday, June 04, 2011

    CodePlex Daily Summary for Saturday, June 04, 2011Popular ReleasesSublightCmd: SublightCmd 1.1.0: -added guessTitle switch -improved console output -updated Sublight.Lib -updated SharpZipLib library -added new command: batch (same as downloadbatch) -added waitForExit switch for batch/downloadbatch commandpatterns & practices: Project Silk: Project Silk Community Drop 10 - June 3, 2011: Changes from previous drop: Many code changes: please see the readme.mht for details. New "Application Notifications" chapter. Updated "Server-Side Implementation" chapter. Guidance Chapters Ready for Review The Word documents for the chapters are included with the source code in addition to the CHM to help you provide feedback. The PDF is provided as a separate download for your convenience. Installation Overview To install and run the reference implementation, you must perform the fol...Claims Based Identity & Access Control Guide: Release Candidate: Highlights of this release This is the release candidate drop of the new "Claims Identity Guide" edition. In this release you will find: All code samples, including all ACS v2: ACS as a Federation Provider - Showing authentication with LiveID, Google, etc. ACS as a FP with Multiple Business Partners. ACS and REST endpoints. Using a WP7 client with REST endpoints. All ACS specific chapters. Two new chapters on SharePoint (SSO and Federation) All revised v1 chapters We are now ...Media Companion: MC 3.404b Weekly: Extract the entire archive to a folder which has user access rights, eg desktop, documents etc. Refer to the documentation on this site for the Installation & Setup Guide Important! *** Due to an issue where the date added & the full genre information was not being read into the Movie cache, it is highly recommended that you perform a Rebuild Movies when first running this latest version. This will read in the information from the nfo's & repopulate the cache used by MC during operation. Fi...Terraria Map Generator: TerrariaMapTool 1.0.0.4 Beta: 1) Fixed the generated map.html file so that the file:/// is included in the base path. 2) Added the ability to use parallelization during generation. This will cause the program to use as many threads as there are physical cores. 3) Fixed some background overdraw.DotRas: DotRas v1.2 (Version 1.2.4168): This release includes compiled (and signed) versions of the binaries, PDBs, CHM help documentation, along with both C# and VB.NET examples. Please don't forget to rate the release! If you find a bug, please open a work item and give as much description as possible. Stack traces, which operating system(s) you're targeting, and build type is also very helpful for bug hunting. If you find something you believe to be a bug but are not sure, create a new discussion on the discussions board. Thank...Caliburn Micro: WPF, Silverlight and WP7 made easy.: Caliburn.Micro v1.1 RTW: Download ContentsDebug and Release Assemblies Samples Changes.txt License.txt Release Highlights For WP7A new Tombstoning API based on ideas from Fluent NHibernate A new Launcher/Chooser API Strongly typed Navigation SimpleContainer included The full phone lifecycle is made easy to work with ie. we figure out whether your app is actually Resurrecting or just Continuing for you For WPFSupport for the Client Profile Better support for WinForms integration All PlatformsA power...VidCoder: 0.9.1: Added color coding to the Log window. Errors are highlighted in red, HandBrake logs are in black and VidCoder logs are in dark blue. Moved enqueue button to the right with the other control buttons. Added logic to report failures when errors are logged during the encode or when the encode finishes prematurely. Added Copy button to Log window. Adjusted audio track selection box to always show the full track name. Changed encode job progress bar to also be colored yellow when the enco...AutoLoL: AutoLoL v2.0.1: - Fixed a small bug in Auto Login - Fixed the updaterEPPlus-Create advanced Excel 2007 spreadsheets on the server: EPPlus 2.9.0.1: EPPlus-Create advanced Excel 2007 spreadsheets on the server This version has been updated to .Net Framework 3.5 New Features Data Validation. PivotTables (Basic functionalliy...) Support for worksheet data sources. Column, Row, Page and Data fields. Date and Numeric grouping Build in styles. ...and more And some minor new features... Ranges Text-Property|Get the formated value AutofitColumns-method to set the column width from the content of the range LoadFromCollection-metho...jQuery ASP.Net MVC Controls: Version 1.4.0.0: Version 1.4.0.0 contains the following additions: Upgraded to MVC 3.0 Upgraded to jQuery 1.6.1 (Though the project supports all jQuery version from 1.4.x onwards) Upgraded to jqGrid 3.8 Better Razor View-Engine support Better Pager support, includes support for custom pagers Added jqGrid toolbar buttons support Search module refactored, with full suport for multiple filters and ordering And Code cleanup, bug-fixes and better controller configuration support.Nearforums - ASP.NET MVC forum engine: Nearforums v6.0: Version 6.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: Authentication using Membership Provider for SQL Server and MySql Spam prevention: Flood Control Moderation: Flag messages Content management: Pages: Create pages (about us/contact/texts) through web administration Allow nearforums to run as an IIS subapp Migrated Facebook Connect to OAuth 2.0 Visit the project Roadmap for more details.NetOffice - The easiest way to use Office in .NET: NetOffice Release 0.8b: Changes: - fix critical issue 15922(AccessViolationException) once and for all ...update is strongly recommended Known Issues: - some addin ribbon examples has a COM Register function with missing codebase entry(win32 registry) ...the problem is only affected to c# examples. fixed in latest source code. NetOffice\ReleaseTags\NetOffice Release 0.8.rar Includes: - Runtime Binaries and Source Code for .NET Framework:......v2.0, v3.0, v3.5, v4.0 - Tutorials in C# and VB.Net:...................Facebook Graph Toolkit: Facebook Graph Toolkit 1.5.4186: Updates the API in response to Facebook's recent change of policy: All Graph Api accessing feeds or posts must provide a AccessToken.Serviio for Windows Home Server: Beta Release 0.5.2.0: Ready for widespread beta. Synchronized build number to Serviio version to avoid confusion.AcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta4: ??AcDown?????????????,??????????????,????、????。?????Acfun????? ????32??64? Windows XP/Vista/7 ????????????? ??:????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64),?????"?????????"??? ??v3.0 Beta4 2011-5-31?? ???Bilibili.us????? ???? ?? ???"????" ???Bilibili.us??? ??????? ?? ??????? ?? ???????? ?? ?? ???Bilibili.us?????(??????????????????) ??????(6.cn)?????(????) ?? ?????Acfun?????????? ?????????????? ???QQ???????? ????????????Discussion...CodeCopy Auto Code Converter: Code Copy v0.1: Full add-in, setup project source code and setup fileTerrariViewer: TerrariViewer v2.4.1: Added Piggy Bank editor and fixed some minor bugs.Kooboo CMS: Kooboo CMS 3.02: Updated the Kooboo_CMS.zip at 2011-06-02 11:44 GMT 1.Fixed: Adding data rule issue on page. 2.Fixed: Caching issue for higher performance. Updated the Kooboo_CMS.zip at 2011-06-01 10:00 GMT 1. Fixed the published package throwed a compile error under WebSite mode. 2. Fixed the ContentHelper.NewMediaFolderObject return TextFolder issue. 3. Shorten the name of ContentHelper API. NewMediaFolderObject=>MediaFolder, NewTextFolderObject=> TextFolder, NewSchemaObject=>Schema. Also update the C...mojoPortal: 2.3.6.6: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2366-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.New ProjectsCampaign Portfolio Manager: This is a light-weight organizer for GMs and Players of Table-Top RPGs. It allows quick access to basic notes regarding PCs, NPCs, and planned Stories. Written in C#eMarketplace: eMarketPlace is a website project for buyer and sellers for marketing any type of goodsEstudo de Realidade Aumentada usando Balder: Estudo de Realidade Aumentada usando desenhos 3D e Processamento de Imagem.Hex Vitals Calculator: Hex Vitals will help game masters understand their hex maps better. If you have one of seven measurements for a hex, you can use it to derive the other six. This program was written in C#.Internet Programming with Asp.NET 4: This project based on lesson in my college , Ma Chung University which is located at Malang, Indonesia. We (team = 2person) created this with Microsoft Visual Studio 2010 ( Visual Basic.NET). This project site about cooking club (www.hostingmm.com) at my university.kekkoooLibs: my tests.Moira Project: Moira project is a configurable, extensible and pluggable software for file management. Its core is a component that watches the file system and is capable of running different tasks based on files properties analysis. OOP: OOP is a C++ framework, which provides many utilities to make easier for C++ programmers to develop C++ programOsProject: this project is a sample of company routine to call technical. PowerShell Patch Audit/Installation GUI: PoshPAIG allows you to easily audit and install patches on your servers in the network by providing a graphical interface to select which servers to audit/install and to generate reports for the systems.RiordanWebSite: ??web??SelvinListSyncSample: My sample for Microsoft Sync Framework 4.0 CTP on Android deviceSharePoint 2010 XML Managed Metadata Migrator: The SP2010 Managed Metadata Migrator allows the export of a metadata service configuration from a source SP2010 farm, then re-import into a target SP2010 farm with options to re-associate your content type definitions with the defined term sets. Developed in C#SharePoint Foundation QueryString Filter WebPart: SharePoint foundation web part to provide out of the box components the capability to filter information based on a url querystring parameterSitePounder: Send infinite requests to specified URL target; join with others to wage distributed denial of service attacks against the deserving and overly self-serving.Snaky: A Simple Snake Game in C++ using SFML 2.0SOL Polar Explorer: A performance polar viewer and data explorer for sailonline.org polar files.SPEventReceiverWebpart: A SharePoint Webpart which allows you to add or delete EventReceivers to or from Lists in the current web.VS.NET Deployment Project Updater: VDProjectUpdater is a command line utility that will update a VS.NET setup project (vdproj) version and product/package/upgrade/module identifiers. This allows the setup projects to be integrated into automated builds that generate versioned setup outputs.?????? For Silverlight 5: ?????Silverlight ?RIA Service ???????????,??????EsaySL???,????????????,??????Silverlight

    Read the article

  • Activation Error while testing Exception Handling Application Block

    - by CletusLoomis
    I'm getting the following error while testing my EHAB implementation: {"Activation error occured while trying to get instance of type ExceptionPolicyImpl, key "LogPolicy""} System.Exception Stack Trace: StackTrace " at Microsoft.Practices.ServiceLocation.ServiceLocatorImplBase.GetInstance(Type serviceType, String key) in c:\Home\Chris\Projects\CommonServiceLocator\main\Microsoft.Practices.ServiceLocation\ServiceLocatorImplBase.cs:line 53 at Microsoft.Practices.ServiceLocation.ServiceLocatorImplBase.GetInstance[TService](String key) in c:\Home\Chris\Projects\CommonServiceLocator\main\Microsoft.Practices.ServiceLocation\ServiceLocatorImplBase.cs:line 103 at Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.ExceptionPolicy.GetExceptionPolicy(Exception exception, String policyName) in e:\Builds\EntLib\Latest\Source\Blocks\ExceptionHandling\Src\ExceptionHandling\ExceptionPolicy.cs:line 131 at Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.ExceptionPolicy.HandleException(Exception exceptionToHandle, String policyName) in e:\Builds\EntLib\Latest\Source\Blocks\ExceptionHandling\Src\ExceptionHandling\ExceptionPolicy.cs:line 55 at Blackbox.Exception.ExceptionMain.LogException(Exception pException) in C:_Work_Black Box\Blackbox.Exception\ExceptionMain.vb:line 14 at BlackBox.Business.BusinessMain.TestExceptionHandling() in C:_Work_Black Box\BlackBox.Business\BusinessMain.vb:line 16 at Blackbox.Service.Service1.TestExceptionHandling() in C:_Work_Black Box\Blackbox.Service\Service.svc.vb:line 43" String Inner Exception: InnerException {"Resolution of the dependency failed, type = "Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.ExceptionPolicyImpl", name = "LogPolicy". Exception occurred while: Calling constructor Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners.FormattedEventLogTraceListener(System.String source, System.String log, System.String machineName, Microsoft.Practices.EnterpriseLibrary.Logging.Formatters.ILogFormatter formatter). Exception is: ArgumentException - Event log names must consist of printable characters and cannot contain \, *, ?, or spaces At the time of the exception, the container was: Resolving Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.ExceptionPolicyImpl,LogPolicy Resolving parameter "policyEntries" of constructor Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.ExceptionPolicyImpl(System.String policyName, System.Collections.Generic.IEnumerable1[[Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.ExceptionPolicyEntry, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]] policyEntries) Resolving Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.ExceptionPolicyEntry,LogPolicy.All Exceptions Resolving parameter "handlers" of constructor Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.ExceptionPolicyEntry(System.Type exceptionType, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.PostHandlingAction postHandlingAction, System.Collections.Generic.IEnumerable1[[Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.IExceptionHandler, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]] handlers, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Instrumentation.IExceptionHandlingInstrumentationProvider instrumentationProvider) Resolving Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Logging.LoggingExceptionHandler,LogPolicy.All Exceptions.Logging Exception Handler (mapped from Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.IExceptionHandler, LogPolicy.All Exceptions.Logging Exception Handler) Resolving parameter "writer" of constructor Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Logging.LoggingExceptionHandler(System.String logCategory, System.Int32 eventId, System.Diagnostics.TraceEventType severity, System.String title, System.Int32 priority, System.Type formatterType, Microsoft.Practices.EnterpriseLibrary.Logging.LogWriter writer) Resolving Microsoft.Practices.EnterpriseLibrary.Logging.LogWriterImpl,LogWriter.default (mapped from Microsoft.Practices.EnterpriseLibrary.Logging.LogWriter, (none)) Resolving parameter "structureHolder" of constructor Microsoft.Practices.EnterpriseLibrary.Logging.LogWriterImpl(Microsoft.Practices.EnterpriseLibrary.Logging.LogWriterStructureHolder structureHolder, Microsoft.Practices.EnterpriseLibrary.Logging.Instrumentation.ILoggingInstrumentationProvider instrumentationProvider, Microsoft.Practices.EnterpriseLibrary.Logging.ILoggingUpdateCoordinator updateCoordinator) Resolving Microsoft.Practices.EnterpriseLibrary.Logging.LogWriterStructureHolder,LogWriterStructureHolder.default (mapped from Microsoft.Practices.EnterpriseLibrary.Logging.LogWriterStructureHolder, (none)) Resolving parameter "traceSources" of constructor Microsoft.Practices.EnterpriseLibrary.Logging.LogWriterStructureHolder(System.Collections.Generic.IEnumerable1[[Microsoft.Practices.EnterpriseLibrary.Logging.Filters.ILogFilter, Microsoft.Practices.EnterpriseLibrary.Logging, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]] filters, System.Collections.Generic.IEnumerable1[[System.String, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]] traceSourceNames, System.Collections.Generic.IEnumerable1[[Microsoft.Practices.EnterpriseLibrary.Logging.LogSource, Microsoft.Practices.EnterpriseLibrary.Logging, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]] traceSources, Microsoft.Practices.EnterpriseLibrary.Logging.LogSource allEventsTraceSource, Microsoft.Practices.EnterpriseLibrary.Logging.LogSource notProcessedTraceSource, Microsoft.Practices.EnterpriseLibrary.Logging.LogSource errorsTraceSource, System.String defaultCategory, System.Boolean tracingEnabled, System.Boolean logWarningsWhenNoCategoriesMatch, System.Boolean revertImpersonation) Resolving Microsoft.Practices.EnterpriseLibrary.Logging.LogSource,General Resolving parameter "traceListeners" of constructor Microsoft.Practices.EnterpriseLibrary.Logging.LogSource(System.String name, System.Collections.Generic.IEnumerable1[[System.Diagnostics.TraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]] traceListeners, System.Diagnostics.SourceLevels level, System.Boolean autoFlush, Microsoft.Practices.EnterpriseLibrary.Logging.Instrumentation.ILoggingInstrumentationProvider instrumentationProvider) Resolving Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners.ReconfigurableTraceListenerWrapper,Event Log Listener (mapped from System.Diagnostics.TraceListener, Event Log Listener) Resolving parameter "wrappedTraceListener" of constructor Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners.ReconfigurableTraceListenerWrapper(System.Diagnostics.TraceListener wrappedTraceListener, Microsoft.Practices.EnterpriseLibrary.Logging.ILoggingUpdateCoordinator coordinator) Resolving Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners.FormattedEventLogTraceListener,Event Log Listener?implementation (mapped from System.Diagnostics.TraceListener, Event Log Listener?implementation) Calling constructor Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners.FormattedEventLogTraceListener(System.String source, System.String log, System.String machineName, Microsoft.Practices.EnterpriseLibrary.Logging.Formatters.ILogFormatter formatter) "} System.Exception My web.config is as follows: <?xml version="1.0"?> <configuration> <configSections> <section name="loggingConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Logging.Configuration.LoggingSettings, Microsoft.Practices.EnterpriseLibrary.Logging, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="true" /> <section name="exceptionHandling" type="Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Configuration.ExceptionHandlingSettings, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="true" /> </configSections> <loggingConfiguration name="" tracingEnabled="true" defaultCategory="General"> <listeners> <add name="Event Log Listener" type="Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners.FormattedEventLogTraceListener, Microsoft.Practices.EnterpriseLibrary.Logging, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" listenerDataType="Microsoft.Practices.EnterpriseLibrary.Logging.Configuration.FormattedEventLogTraceListenerData, Microsoft.Practices.EnterpriseLibrary.Logging, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" source="Enterprise Library Logging" formatter="Text Formatter" log="C:\Blackbox.log" machineName="." traceOutputOptions="LogicalOperationStack, DateTime, Timestamp, Callstack" /> </listeners> <formatters> <add type="Microsoft.Practices.EnterpriseLibrary.Logging.Formatters.TextFormatter, Microsoft.Practices.EnterpriseLibrary.Logging, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" template="Timestamp: {timestamp}{newline}&#xA;Message: {message}{newline}&#xA;Category: {category}{newline}&#xA;Priority: {priority}{newline}&#xA;EventId: {eventid}{newline}&#xA;Severity: {severity}{newline}&#xA;Title:{title}{newline}&#xA;Machine: {localMachine}{newline}&#xA;App Domain: {localAppDomain}{newline}&#xA;ProcessId: {localProcessId}{newline}&#xA;Process Name: {localProcessName}{newline}&#xA;Thread Name: {threadName}{newline}&#xA;Win32 ThreadId:{win32ThreadId}{newline}&#xA;Extended Properties: {dictionary({key} - {value}{newline})}" name="Text Formatter" /> </formatters> <categorySources> <add switchValue="All" name="General"> <listeners> <add name="Event Log Listener" /> </listeners> </add> </categorySources> <specialSources> <allEvents switchValue="All" name="All Events" /> <notProcessed switchValue="All" name="Unprocessed Category" /> <errors switchValue="All" name="Logging Errors &amp; Warnings"> <listeners> <add name="Event Log Listener" /> </listeners> </errors> </specialSources> </loggingConfiguration> <exceptionHandling> <exceptionPolicies> <add name="LogPolicy"> <exceptionTypes> <add name="All Exceptions" type="System.Exception, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" postHandlingAction="NotifyRethrow"> <exceptionHandlers> <add name="Logging Exception Handler" type="Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Logging.LoggingExceptionHandler, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Logging, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" logCategory="General" eventId="100" severity="Error" title="Enterprise Library Exception Handling" formatterType="Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.TextExceptionFormatter, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling" priority="0" /> </exceptionHandlers> </add> </exceptionTypes> </add> <add name="WcfExceptionShielding"> <exceptionTypes> <add name="InvalidOperationException" type="System.InvalidOperationException, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" postHandlingAction="ThrowNewException"> <exceptionHandlers> <add type="Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.WCF.FaultContractExceptionHandler, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.WCF, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" exceptionMessageResourceType="" exceptionMessageResourceName="This is the message" exceptionMessage="This is the exception" faultContractType="Blackbox.Service.WCFFault, Blackbox.Service, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null" name="Fault Contract Exception Handler"> <mappings> <add source="{Guid}" name="Id" /> <add source="{Message}" name="MessageText" /> </mappings> </add> </exceptionHandlers> </add> </exceptionTypes> </add> </exceptionPolicies> </exceptionHandling> <connectionStrings> <add name="CompassEntities" connectionString="metadata=~\bin\CompassModel.csdl|~\bin\CompassModel.ssdl|~\bin\CompassModel.msl;provider=Devart.Data.Oracle;provider connection string=&quot;User Id=foo;Password=foo;Server=foo64mo;Home=OraClient11g_home1;Persist Security Info=True&quot;" providerName="System.Data.EntityClient" /> <add name="BlackboxEntities" connectionString="metadata=~\bin\BlackboxModel.csdl|~\bin\BlackboxModel.ssdl|~\bin\BlackboxModel.msl;provider=System.Data.SqlClient;provider connection string=&quot;Data Source=sqldev1\cps;Initial Catalog=FundServ;Integrated Security=True;MultipleActiveResultSets=True&quot;" providerName="System.Data.EntityClient" /> </connectionStrings> <system.web> <compilation debug="true" strict="false" explicit="true" targetFramework="4.0" /> </system.web> <system.serviceModel> <behaviors> <serviceBehaviors> <behavior> <!-- To avoid disclosing metadata information, set the value below to false and remove the metadata endpoint above before deployment --> <serviceMetadata httpGetEnabled="true"/> <!-- To receive exception details in faults for debugging purposes, set the value below to true. Set to false before deployment to avoid disclosing exception information --> <serviceDebug includeExceptionDetailInFaults="false"/> </behavior> </serviceBehaviors> </behaviors> <serviceHostingEnvironment multipleSiteBindingsEnabled="true" /> </system.serviceModel> <system.webServer> <modules runAllManagedModulesForAllRequests="true"/> </system.webServer> </configuration> My code is as follows: Public Shared Function LogException(ByVal pException As System.Exception) As Boolean Return ExceptionPolicy.HandleException(pException, "LogPolicy") End Function Any assistance is appreciated.

    Read the article

  • pylucene: install error

    - by Pradeep
    I am trying to install Pylucene (pylucene-3.3-3-src.tar.gz) on my ubuntu linux 11.10. I have python 2.7.2. I was able to compile JCC (I think) because I didnt see any error when I installed it. When I tried to install Pylucene I get the following error. Can someone help? Thanks. ICU not installed /usr/bin/python -m jcc --shared --jar lucene-java-3.3/lucene/build/lucene-core-3.3.jar --jar lucene-java-3.3/lucene/build/contrib/analyzers/common/lucene-analyzers-3.3.jar --jar lucene-java-3.3/lucene/build/contrib/memory/lucene-memory-3.3.jar --jar lucene-java-3.3/lucene/build/contrib/highlighter/lucene-highlighter-3.3.jar --jar build/jar/extensions.jar --jar lucene-java-3.3/lucene/build/contrib/queries/lucene-queries-3.3.jar --jar lucene-java-3.3/lucene/build/contrib/grouping/lucene-grouping-3.3.jar --package java.lang java.lang.System java.lang.Runtime --package java.util java.util.Arrays java.util.HashMap java.util.HashSet java.text.SimpleDateFormat java.text.DecimalFormat java.text.Collator --package java.util.regex --package java.io java.io.StringReader java.io.InputStreamReader java.io.FileInputStream --exclude org.apache.lucene.queryParser.Token --exclude org.apache.lucene.queryParser.TokenMgrError --exclude org.apache.lucene.queryParser.QueryParserTokenManager --exclude org.apache.lucene.queryParser.ParseException --exclude org.apache.lucene.search.regex.JakartaRegexpCapabilities --exclude org.apache.regexp.RegexpTunnel --exclude org.apache.lucene.analysis.cn.smart.AnalyzerProfile --python lucene --mapping org.apache.lucene.document.Document 'get:(Ljava/lang/String;)Ljava/lang/String;' --mapping java.util.Properties 'getProperty:(Ljava/lang/String;)Ljava/lang/String;' --sequence java.util.AbstractList 'size:()I' 'get:(I)Ljava/lang/Object;' --rename org.apache.lucene.search.highlight.SpanScorer=HighlighterSpanScorer --version 3.3 --module python/collections.py --module python/ICUNormalizer2Filter.py --module python/ICUFoldingFilter.py --module python/ICUTransformFilter.py --files 3 --build /usr/bin/python: No module named jcc make: *** [compile] Error 1 Here is my Makefile configuration which I uncommented PREFIX_PYTHON=/usr ANT=ant PYTHON=$(PREFIX_PYTHON)/bin/python JCC=$(PYTHON) -m jcc --shared NUM_FILES=3

    Read the article

  • Testing movie with Flash IDE fails to load file from localhost

    - by davgothic
    Hi, I'm just wondering if anybody can help me with my simple but frustrating problem. I have created an SWF that loads an XML file from http://localhost/flash/Projects/MEL/Quiz/Quiz/bin/xml/quiz.xml, but I get this error when running the movie using Test Movie in the Flash IDE. Error #2044: Unhandled ioError:. text=Error #2032: Stream Error. URL: http://localhost/flash/Projects/MEL/Quiz/Quiz/bin/xml/quiz.xml at Main/loadConfig()[D:\www\webroot\flash\Projects\MEL\Quiz\Quiz\src\Main.as:126] at Main/configLoadError()[D:\www\webroot\flash\Projects\MEL\Quiz\Quiz\src\Main.as:143] at flash.events::EventDispatcher/dispatchEventFunction() at flash.events::EventDispatcher/dispatchEvent() at flash.net::URLLoader/onComplete() The error I get if I handle the exception is: [IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2032: Stream Error. URL: http://localhost/flash/Projects/MEL/Quiz/Quiz/bin/xml/quiz.xml"] Trouble is running the SWF in a browser locally does work, it only throws these errors in the Flash IDE. I have tried a adding wildcard crossdomain.xml file in my root web directory and setting the SWF publish properties for local playback security to Allow network only, but neither of these have solved my problem. I know Windows 7 handles localhost name resolution differently compared to previous versions of Windows but I have even added 127.0.0.1 localhost to my hosts file to no avail. Can anyone shed any light on this issue?

    Read the article

  • Can I set a <probing> privatePath in ~/subdir/web.config without access to the root application .con

    - by Bago
    In ASP.NET, is it possible to set a path from a web.config in a subdir that is not setup as a virtual directory? In other words, can I reference a private assembly in the ~/subdir/bin folder? Take a look at my setup below, and let me know if I'm doing something wrong, please. Let me explain why I'm doing this: my page is setup in ~/subdir. I don't have write access to the root. I only have FTP access to the server (i.e., I am not an IIS admin and I can't login to the machine) I am trying to use FCKeditor in my subdir application Here is my folder structure: / | -subdir | | - Bin | | | *FredCK.FCKeditorV2.dll | | *Default.aspx | | *web.config Here is the <runtime> section of ~/subdir/web.config: <runtime> <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1"> <probing privatePath="subdir;subdir/bin" /> </dependentAssembly> </assemblyBinding> </runtime> I've tried all sorts of things to get to work. However, upon checking the Fusion logs, my subdir never shows up in the probing paths.

    Read the article

  • Git subtree not properly using .gitignore when doing a partial clone

    - by D W
    I am a graduate student with many scripts, bibliography data in bibtex, thesis draft in latex, presentations in open office, posters in scribus, and figures and result data. I would like to put everything in one project under version control. Then when I need to work on a portion such as the bibliography data, I would like to check that subdirectory out, modify it as necessary and merge it back.I would like the ability to check out one version to my home computer, and a different one to my work computer and make changes to each independently and eventually merge them back. I would also like to be able to check out a piece of code from this big project and import it with versioning into a separate project. If I may changes I'd like to be able to merge them back to the original project. Based on my understanding git subtree can do this. http://github.com/apenwarr/git-subtree There is an example that is along the lines of what I'm trying to do at: http://psionides.jogger.pl/2010/02/04/sharing-code-between-projects-with-git-subtree/ Say the trunk of my project contained the directories: (bib bin cfg data fig src todo). When I use git subtree split -P bib -b export git checkout export I get a the bib directory, plus all files that should have been ignored or considered binary based on .gitignore such as the src directory and everything in it that ends in a tilde or the ./data directory. dwickrama@DWwork:~/research/trunk$ ls * -r biblography.bib JabRef src: script1.sh~ README~ script2.sh~ script3.sh~ script4.R~ script5.awk~ script5.py~ cfg: cfgFile1.ini~ cfgFile2.ini~ cfgFile3.ini~ bin: bigBinaryPackage1 bigBinaryPackage2 dwickrama@DWwork:~/research/trunk$ My .gitignore file is as follows: *.doc diff=word *.tex diff=tex *.bib diff=bibtex *.py diff=python *.eps binary *.jpg binary *.png binary ./bin/* binary *~ How do I prevent this?

    Read the article

  • gcc compile error when installing Data::Alias package from CPAN (Strawberry Perl)

    - by JoelFan
    I'm trying to install the Data::Alias package from CPAN and I'm getting compile errors from gcc. I'm on Windows Server 2008: Writing Makefile for Data::Alias cp lib/Data/Alias.pm blib\lib\Data\Alias.pm C:\strawberry\perl\bin\perl.exe "-Iinc" C:\strawberry\perl\lib\ExtUtils\xsubpp -typemap C:\strawberry\perl\lib\ExtUtils\typemap Alias.xs > Alias.xsc && C:\str awberry\perl\bin\perl.exe "-Iinc" -MExtUtils::Command -e "mv" -- Alias.xsc Alias .c gcc -c -s -O2 -DWIN32 -DHAVE_DES_FCRYPT -DUSE_SITECUSTOMIZE -DPERL_IMPL ICIT_CONTEXT -DPERL_IMPLICIT_SYS -fno-strict-aliasing -mms-bitfields -DPERL_MSVC RT_READFIX -s -O2 -DVERSION=\"1.07\" -DXS_VERSION=\"1.07\" "-IC:\str awberry\perl\lib\CORE" Alias.c Alias.xs: In function 'da_localize_gvar': Alias.xs:369: error: 'Nullsv' undeclared (first use in this function) Alias.xs:369: error: (Each undeclared identifier is reported only once Alias.xs:369: error: for each function it appears in.) Alias.xs: In function 'da_refgen': Alias.xs:376: error: 'SVt_RV' undeclared (first use in this function) Alias.xs: In function 'DataAlias_pp_rv2sv': Alias.xs:690: warning: 'PL_no_symref' is deprecated (declared at C:\strawberry\p erl\lib\CORE/perl.h:4241) Alias.xs: In function 'DataAlias_pp_rv2gv': Alias.xs:747: warning: 'PL_no_symref' is deprecated (declared at C:\strawberry\p erl\lib\CORE/perl.h:4241) Alias.xs: In function 'DataAlias_pp_return': Alias.xs:1251: error: 'Nullsv' undeclared (first use in this function) Alias.xs: In function 'da_transform': Alias.xs:1436: error: 'Nullop' undeclared (first use in this function) Alias.xs:1450: error: 'OP_SETSTATE' undeclared (first use in this function) Alias.xs: In function 'da_peep2': Alias.xs:1589: error: 'OP_SETSTATE' undeclared (first use in this function) Alias.xs: In function 'da_ck_entersub': Alias.xs:1767: error: 'Nullop' undeclared (first use in this function) dmake.EXE: Error code 129, while making 'Alias.o' XMATH/Data-Alias-1.07.tar.gz C:\strawberry\c\bin\dmake.EXE -- NOT OK Running make test Can't test without successful make Running make install Make had returned bad status, install seems impossible

    Read the article

  • System.IO.FileLoadException

    - by Raj G
    Hi All, I have got this error when using Enterprise Library 3.1 May 2007 version. We are developing a product and have a common lib directory beneath the Subversion Trunk directory <\Trunk\Lib\ into which we put all the third party DLLs. Inside this we have Microsoft\EnterpriseLibrary\v3.1 in which we have copied all the dlls from \Program Files\Microsoft Enterprise Library May2007\bin. Everything was working properly until one of the developers installed the source code on this machine. There were some dlls copied at the end of the source code installation and once that was done, he is not able to run the project anymore. He always gets this error 'Microsoft.Practices.EnterpriseLibrary.Data, Version=3.1.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)' What is the problem here? I thought that when the source code was installed it was just supposed to build everything and copy in the bin directory within the source code parent directory. Also we have copied the Dlls from Microsoft Enterprise Library May 2007\bin directory into our product development directory and references into our project with a copylocal flag set to true. Can anyone help me out here RK

    Read the article

  • Installing mysql on leopard: "Can't connect to local MySQL server through socket"

    - by Neil
    I migrated to a new machine and used migration assistant to copy across my files (which seemed to copy across the DBs) but I had to use macports to install Mysql (whereas last time I compiled from source via Dan Benjamin's guide). For some reason, mysql is intermittently throwing the following error; Can't connect to local MySQL server through socket '/opt/local/var/run/mysql5/mysqld.sock' (2) It does this no matter what I try, which has included setting the socket in /opt/local/etc/mysql5/my.cnf. Previously I've managed to temporarily fix this by restarting the machine, but right now it just doesn't want to know, despite grep mysql telling me I seem to have a pid; 0 46 1 0 0:00.01 ?? 0:00.01 /opt/local/bin/daemondo --label=mysql5 --start-cmd /opt/local/etc/LaunchDaemons/org.macports.mysql5/mysql5.wrapper start ; --stop-cmd /opt/local/etc/LaunchDaemons/org.macports.mysql5/mysql5.wrapper stop ; --restart-cmd /opt/local/etc/LaunchDaemons/org.macports.mysql5/mysql5.wrapper restart ; --pid=none 0 70 1 0 0:00.01 ?? 0:00.01 /bin/sh /opt/local/lib/mysql5/bin/mysqld_safe --datadir=/opt/local/var/db/mysql5 --pid-file=/opt/local/var/db/mysql5/localhost.pid 74 100 70 0 0:09.22 ?? 1:02.68 /opt/local/libexec/mysqld --basedir=/opt/local --datadir=/opt/local/var/db/mysql5 --user=mysql --pid-file=/opt/local/var/db/mysql5/localhost.pid --socket=/tmp/mysql.sock 501 66217 65266 0 0:00.00 ttys001 0:00.00 grep mysql How do I fix this? Are there any steps I can take next? I've been trying for a few weeks now and I've read round all relevant blog posts, so I'm completely out of ideas.

    Read the article

< Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >