Search Results

Search found 11195 results on 448 pages for 'disconnected environment'.

Page 134/448 | < Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >

• SSH authentification with public key fails

  - by palani

  I have my id_rsa.pub key under my /home/user/.ssh. I carefully copied that key and paste my key to respository Git account. While trying to connect from my local system to my git respository, I got the following error: warning: Authentication failed. Disconnected; no more authentication methods available (No further authentication methods available.) I removed SSH in system and re-enable and did again, but no luck. I have no idea what's happening with my SSH key. Can any one please tell me on this? Note : I noticed in my home /home/user/.ssh && /home/user/.ssh2

  Read the article

• Netgear genie says my Internet is off, while Windows claims I am connected

  - by Manu

  I'm connected via wifi to my ISP's router/modem. While Windows says that I'm always connected, I keep getting messages from Netgear Genie that I've lost contact to the Internet, and I cannot access webpages until it comes back. There are two other computers in the house, one connected to the router via ethernet, the other via wifi, both seem to have no such problems. I've wondered if Netgear genie itself was the problem, but I am regularly disconnected even if I uninstall it. And I'd rather have it since it accurently tells me if I'm connected or not. Why does windows says I'm online if I can't access any online game, or website ? Is "netgear genie" the problem ? I've removed the connection, recreated it, I've even copied the settings to a usb key from the computer that has wifi access.

  Read the article

• Wireshark does not see interfaces (winXP)

  - by bua

  Short story: Wireshark is working....on my winXP-32b ... usage .... Long long time later Wireshark does not work It can't find any usefull interface (just VPN) ipconfig /all Ethernet adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Dell Wireless 1490 Dual Band WLAN Mini-Card Physical Address. . . . . . . . . : SOME VALID MAC Ethernet adapter eth0: Connection-specific DNS Suffix . : xxxx Description . . . . . . . . . . . : Broadcom 440x 10/100 Integrated Controller Physical Address. . . . . . . . . : SOME VALID MAC Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.12.68 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168..... ..... Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Fortinet virtual adapter Physical Address. . . . . . . . . : SOME VALID MAC Following steps didn't help: Several Wireshark re-installation Several LIBPCAP re installation SP3 for winXP Any ideas welcome.

  Read the article

• Windows 7 "Could not reconnect all network drives" on boot

  - by Thermionix

  Windows 7 won't reconnect to my network drives on startup. Once it is done booting opening Windows Explorer and clicking each share will mount them. Windows 7 Enterprise N Service Pack 1 I have attempted formatting the windows machine - first thing done to machine was to map the network drives, upon reboot they were disconnected. It is running on an Crucial M4 64gb SSD. The host of the network shares is a Ubuntu-Server machine connected through a gigabit switch. A modem provides dhcp, although both these machines have static IP's defined. It won't reconnect the drives regardless of whether they're SAMBA shares or NFS shares - therefore I believe it's an issue with the windows machine. Ubuntu 11.10 (GNU/Linux 3.0.0-12-server x86_64) I've tried using ip address instead of netbios name for mapping shares on the windows machine, Also tried setting EnableLinkedConnections=1 gpedit.msc Computer Configuration - Administrative Templates - System-Logon - always wait for the network at computer startup and logon = yes

  Read the article

• How can I join two simple home networks together using an ethernet cable?

  - by Ilia Jerebtsov

  I want to join two different home networks together like so: PC A1 PC A2 PC B1 PC B2 \ / \ / Gateway A <----- ethr. cable -----> Gateway B | | ADSL modem A ADSL modem B Both networks are of the basic residential type with identical configuration, with all PCs running Vista/7. The point is to temporarily join two apartments in a building for gaming and file sharing, and the holy grail would be: PCs on network A can access PCs on network B and vice-versa (file shares and gaming). Each network uses its own internet connection. Data between networks shouldn't take a trip through the internet (broadband upload speeds are severely capped) A network's internet access should continue working if the joining cable is disconnected with minimal configuration changes. How closely can this be achieved?

  Read the article

• Auto-connect Bluetooth headphones in Windows 7 64bit

  - by CptSkippy

  I have a pair of bluetooth headphones that I've successfully paired with my Windows 7 64bit machine and audio plays through them without a hitch. On the Device Stage under the properties of the headphones in troubleshooting it shows "last connected" as "currently connected" even if I power cycle the headphones or after a reboot of my computer. So the Windows bluetooth stack has no trouble finding them. The problem I have is that whenever the headphones reconnect to my pc they show up as disconnected in the Sound Settings and no sound is routed to them until I manually connect them. I have to go into Sound Settings, then from the Playback tab right click on the headphones and choose the Connect option. Is there a way to make the Sound Settings connect automatically whenever the headphones are available to Windows?

  Read the article

• Key Repeat no longer works on Windows 7 Lenovo Windows 700 laptop

  - by Clyde

  The title pretty much sums up my problem. I can type fine, but holding down the key doesn't repeat, including the arrow keys which is super-annoying. "Filter Keys" in the Ease of access center is not turned on, so that's not the problem. Any ideas? UPDATE Also, the numeric keypad on the right is not working at all -- not just that it won't repeat, but there is no response at all to the numbers, the enter key, the numlk key. The purple Fn+NumLk which usually opens the calc program doesn't work. It's like it's totally disconnected.

  Read the article

• Ubuntu Connect Button Disabled, cannot connect

  - by CSharperWithJava

  I'm trying to connect to my school network from Ubuntu 12. The network is WPA encrypted and I can connect just fine if the network manager establishes a connection automatically. However, when I get disconnected and try to reconnect a username and password prompt pops up. The credentials are already stored and are autofilled in correctly, but the Connect button is disabled so I can't actually connect to the network. What can I do? The only guess I've found so far is the password is too short and Ubuntu is expecting a full WPA key. I don't administer the school network though so I certainly can't change that.

  Read the article

• Random Server shutdown? - CentOS

  - by Kevin Hammett

  My system was working fine, and then it just had a random restart. Anyone have any idea of the problem? The message log: Jul 6 22:56:34 909I7 shutdown[719711]: shutting down for system halt Jul 6 22:56:34 909I7 init: Switching to runlevel: 0 Jul 6 22:56:35 909I7 smartd[10743]: smartd received signal 15: Terminated Jul 6 22:56:35 909I7 smartd[10743]: smartd is exiting (exit status 0) Jul 6 22:56:42 909I7 hcid[8749]: Got disconnected from the system message bus Jul 6 22:56:42 909I7 auditd[8430]: The audit daemon is exiting. Jul 6 22:56:42 909I7 kernel: audit(1341640602.922:344412): audit_pid=0 old=8430 by auid$ Jul 6 22:56:43 909I7 pcscd: pcscdaemon.c:572:signal_trap() Preparing for suicide Jul 6 22:56:43 909I7 pcscd: hotplug_libusb.c:376:HPRescanUsbBus() Hotplug stopped Jul 6 22:56:44 909I7 pcscd: readerfactory.c:1379:RFCleanupReaders() entering cleaning f$ Jul 6 22:56:44 909I7 pcscd: pcscdaemon.c:532:at_exit() cleaning /var/run Jul 6 22:56:44 909I7 kernel: Kernel logging (proc) stopped. Jul 6 22:56:44 909I7 kernel: Kernel log daemon terminating. Jul 6 22:56:45 909I7 exiting on signal 15

  Read the article

• Windows 7 & kodak printer esp 7

  - by Yoraf

  I have bought a new PC with Windows 7 and a Kodak wireless printer esp 7. I can't download the software always unsuccessful and can't connect to my printer. Any suggestions? Edit (from the other, duplicate question): Still having problems with printing. I did get it working by removing 'bonjour' but turned on yesterday and hey presto it's not working again. The printer is installed and showing as disconnected. Any ideas now? The chat doesn't work with Windows 7, I have downloaded the latest version, they take ages to answer emails, need to print stuff urgently. It's driving me insane!! Please help.

  Read the article

• Exchange 2007 mailbox reassignment

  - by John Virgolino

  I am trying to move a mailbox from one user account to another within a single AD domain. We are using Exchange 2007. I have followed these steps: Disable the account From "Disconnected Mailbox" container, connect to the new account I get a success message When I try to login to OWA using the new user account, I get this message: Outlook Web Access could not connect to Microsoft Exchange. If the problem continues, contact technical support for your organization. Request Url: https://mail.somedomain.com:443/owa/default.aspx User host address: 1.2.3.4 Exception Exception type: Microsoft.Exchange.Data.Storage.ConnectionFailedTransientException Exception message: Cannot open mailbox /o=cgsexchangeorganization/ou=exchange administrative group (fydibohf23spdlt)/cn=recipients/cn=someuser. NOTE: I changed some identifying information for security purposes. I have tried multiple times and get to the same place. When I login to OWA with old account, I get an error that the mailbox cannot be found, which makes total sense. Does anybody have any ideas on this? Thanks!

  Read the article

• Programtically get the Wireless lan config of a machine and use netsh to setup new profile

  - by Maestro1024

  Programtically get the Wireless lan config of a machine and use netsh to setup new profile I am having trouble getting the netsh command to set the ssid of a new card. I installed the drivers and plugged it in. I see in ipconfig it says the "media is disconnected" (fair enough). I then send the following command netsh wlan connect name=profile1 ssid=myNetwork interface="Wireless Network Connection 2" problem is I get an error "There is no profile "profile1" assigned to the specified interface. What is a profile for a wireless card? What should I set it to? How Can I get my SSID set and connected for the card.

  Read the article

• Bluetooth connectivity

  - by Viniketa

  computer: Samsung All in One PC OS: Windows 7 (up-to-date) BT Radio: Broadcom I have Bluetooth speakers I have successfully used with the system in the past. In fact, I had them set as default speakers so audio would transfer when I turned them on. No longer. Now, they show as 'disconnected'. Asking for connection gives no response. Option to set as default is greyed out. Bluetooth view utility gives an error of 10049 when I try to connect (supposedly, the means an invalid device address). I uninstalled the device and re-installed. No help. Any advice? Thanks in advance.

  Read the article

• Can ping/nmap server, nothing else

  - by lowgain

  I was SSHed into our ubuntu LAMP server , and was just doing a svn update, which hung. I disconnected, and since then, I have not been able to SSH in or view any of our websites (neither from my network or through a remote machine). I would have just assumed the server went down, but I can ping the machine and get really quick responses. Using nmap on the box shows all the normal ports open, so I am confused This server is hosted remotely in a datacenter, do I have any remaining options except contacting them for support? Thanks!

  Read the article

• Stop ssh client from offering all the public keys it can find?

  - by Rory McCann

  Like most sysadmins I use openssh all the time. I have about a dozen ssh keys, I like to have a different ssh key for each host. However this causes a problem when I am connecting to a host for the first time, and all I have is a password. I want to just connect to the host using a password, no ssh key in this case. However the ssh client will offer all the public keys in my ~/.ssh/ (I know this from looking at the output of ssh -v). Since I have so many, I will get disconnected for too many authentication failures. Is there some way to tell my ssh client to not offer all the ssh keys?

  Read the article

• Ping Flooding in router log

  - by Freeman

  I've had recently a period of repeated disconnections from my router with connection problems. I checked my router log I found several Ping Flooding entries all originating from the IP 69.171.227.232 which turned out to be one of Facebook IPs! I'm wondering what does that means? Can Facebook chat cause such a condition? My router is DLink dir 600 and the condition that devices were disconnected from router, not router from internet.. Connection is WAN And how to solve this router problem?? My wifi clients were about 3-5 at that time..

  Read the article

• SQL Server 2012 Installation Hangs

  - by Rivka

  We have a Windows 8 machine that we installed SQL Server 2005 on first. We then uninstalled it and installed SQL Server 2012 - unsuccessfully. The installation wizard hung at the point where it says: SqlEngineDBStartConfigAction_install_configrc_Cpu64 The event log showed the following error: The SQL Server (MSSQLSERVER) service terminated with the following service-specific error: WARNING: You have until SQL Server (MSSQLSERVER) to logoff. If you have not logged off at this time, your session will be disconnected, and any open files or devices you have open may lose data. We got the same error while trying to start the service. We tried uninstalling and re-installing but faced the same issue. Any help would be appreciated.

  Read the article

• Manually forcing TCP connection to retry

  - by Vi.

  I have a TCP connection (SSH session to some computer for example) Network suddenly goes down and drops all packets (disconnected cable, out of range). TCP resends packets again and again, retrying with increasing delays. I see the problem and plug the cable back (or restore network somehow). TCP connection finally successfully resends some packet and continues. The problem is that I need to wait for a some timeout on point 5. I want to use my opened SSH session now and not wait for 5-10 seconds until it finds out that connection is working again. How to force all TCP connections to resend data without delays in GNU/Linux?

  Read the article

• How to log Windows server share connections?

  - by sbussinger

  Can anyone make a suggestion for the best way to log connections and disconnections from Windows workstations to a Windows Server 2003 file share? We're having some issues with workstations that have a drive mapped to a server that seem to work fine for awhile and then suddenly appear to get disconnected from the server (with files open). Needless to say this causes some data corruption and error messages. It would help me to troubleshoot the problem if we could somehow monitor and log the session connections and disconnections, to attempt to correlate the connectivity issues with what actions the user is taking at the time and what the server is doing. I just haven't been able to find a way to do this. Specifically I'm talking about the same information that is displayed in the Computer Management control panel applet in the "System Tools|Shared Folders|Sessions" page. Thanks!

  Read the article

• Battery notification always showing 'xx% remaining' with Windows 7 on an acer Aspire 5590

  - by dindeman

  My battery level always shows up as something like 55% remaining or 63% remaining ...etc despite that it is in fact charging. Additionally it doesn't go any further than 80% remaining even if I keep it in charge forever. This leads me to a side annoying effect which is that I cannot proceed to install Windows 7 Service Pack 1 as its installer requires the laptop to be plugged with a power cord. My laptop is plugged with the power cord but because of the above issue (it doesn't display anything else than the xx% remaining) Windows thinks that the laptop is using its battery and that the power cord is disconnected. I have installed the original acer ePower Management tool that let you configure the power scheme... etc, I was hoping that this would help me circumvent the 80% issue but it doesn't.

  Read the article

• View Security Server and Direct Connection

  - by Poort443

  I have a Security Server for my connections from the Internet. This works fine, accept when I enable "Direct Connection to the desktop". I found the following statement on this: If you bypass the secure connection, the client must establish a direct RDP communication to the desktop virtual machine over RDP (port 3389). Does this mean I have to open 3389 (RDP) to the Internet if I want to use Direct Connections? If I disable Direct Connections to get my Security Server working, I have to disable it on my Connection Server. It's my understanding that this means that if I reboot my Connection Server, all the View clients get disconnected. Is there a way I can disable "Direct Connections" for the Security Server, while enabling it for access from the LAN? Tia.

  Read the article

• better options for screen?

  - by lonestar21

  OK. So I love screen. It has saved my bacon a few times when machines crash or get disconnected from the network. However, there are enough reasons keep keep me from using screen for everything, which include: Pain in the butt scrolling. Why can't I just interact as though this is a normal bash shell? My keyboard shortcuts are gone. I have a number of things customized in my bash environment, is there a way to get them to work in screen as well? Are there any tools our tips that I can use to make my screen-using experience as high quality as my bash using experience?

  Read the article

• Windows 7 Intermittent Connection Issues (Continuously "identifying")

  - by andrewktmeikle

  I have an issue solely with my desktop windows 7 machine on my network (the network has multiple different devices, on the same and different operating systems) and the issue is that irregularly, although sometimes frequently, I briefly get disconnected from the internet (briefly is for around 5-10 seconds). However, I never loose the bars on the wifi thing, eg I don't get the yellow triangle, but it goes to the identifying stage and then reconnects. The reason I noticed the problem was when I was streaming music it would stop and I would refresh the page and it would start working again ( turned out it was because it took that amount of time to get connected again). So my question is, what would cause the intermittent issues and start the "identifying" process again. I don't think its my router, because no one else is having problems, so the other option is that its a problem specifically with my machine. I'm connecting to a Netgear DG834GT router, and I'm using a Edimax Wireless-N150 USB Adapter. Anyone have any ideas?

  Read the article

• Manually forcing TCP connection to retry

  - by Vi

  I have a TCP connection (SSH session to some computer for example) Network suddenly goes down and drops all packets (disconnected cable, out of range). TCP resends packets again and again, retrying with increasing delays. I see the problem and plug the cable back (or restore network somehow). TCP connection finally successfully resends some packet and continues. The problem is that I need to wait for a some timeout on point 5. I want to use my opened SSH session now and not wait for 5-10 seconds until it finds out that connection is working again. How to force all TCP connections to resend data without now in GNU/Linux?

  Read the article

• VPN Configuration

  - by Josh

  How can I allow incoming connections on a Windows 7 machine that is connected to VPN? I have some services listening on certain ports that I have forwarded from my router. When the VPN is disconnected, I can connect to these services from my internal network as well as from the Internet without issue. When I connect my VPN however, I am still able to access the ports from my internal network, but not remotely. I think I need a split tunnel setup, and there is an option in the VPN settings to Use Default Gateway on remote network. I want this option enabled so all my traffic is routed through the VPN, but I want incoming connections to be allowed on my internal network IP from the Internet. Is there some hybrid way to set this up with routing?

  Read the article

< Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >