Search Results

Search found 7415 results on 297 pages for 'man behind'.

Page 134/297 | < Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >

  • How to bridge multiple wireless access points (and internet entry points) into one network

    - by amccormack
    I have two DSL lines coming in to wireless access points and then running to a RV082 Gateway/Bridge. The gateway then runs to a switch, which runs to multiple PCs and a Printer (See picture below). Normally, I would set up the wireless access points behind the gateway, but they are also the modems for the dsl. I have found that I can not print to the network printer if I am connected to the wireless network, but only if I am connected to the wired network. How can I configure the Gateway and APs (Routers) so that the PCs and Printer are all on the same internal network? I have tried turning DHCP off or redirect on the APs and redirect them to the Gateway. However, neither of these worked. Furthermore, I tried pinging the Gateway from the AP but got no response.

    Read the article

  • OpenVPN Cloud for Network monitoring

    - by mezgani
    I'm working on a supervision project based on OpenVPN, a good way to send some network traffic through a secure channel to office from there out to the Internet. On office i have an OpenVPN server installed and i need to monitor all branches servers that are behind firewalls. I know that the point to point solution is very easy so we may only install OpenVPN client on node that i need to monitor. In the fact, is there any other issue that could help to supervise all branches DMZ network, without installing the client on each machines.

    Read the article

  • Best MTA setup for home or laptop computers - not server

    - by thomasrutter
    Hello, What is a good MTA (e.g. Postfix or something else) setup for a home computer behind a NAT, or a laptop that connects to various different wifi networks? I've read a lot of Postfix tutorials on how to set it up this way or that, but they are usually geared towards computers that are servers ie they have a static IP have a domain name are always connected to the same network My requirements are, I guess: Ability to forward mail for "root" to another server of my choosing. No listening for incoming SMTP connections - outgoing only Ability to route outgoing mail via an external SMTP server with authentication (and perhaps encryption) If not Postfix, I need an MTA which can queue up mails in case it temporarily has no internet connection.

    Read the article

  • How to modify PATH variable for X11 during log-in?

    - by user1028435
    I originally posted this over at StackOverflow, but someone said it might fit better here. Original question is here: http://stackoverflow.com/questions/10096327/overwriting-print-screen-actions-in-linux-without-administrative-rights. Decided to revise my question, based on what I learned there: Essentially, my problem is that I am working on some lab computers (read: no administrative rights) that, if I log in, I need to change the PATH variable as X11 starts. The reason is that I need to change the PATH variable at this time, as opposed to later, is that the Print Screen command seems to "bind" during login (forgive my bad explanation of this). You can see in the work-around I listed in the previous question, that I can make it work by starting a new X, but I was wondering if it is possible to change upon login. If this seems a poor explanation, you can check out the original link for my context and reasoning behind what I'm doing. Any ideas? Details about Distribution: cat /etc/redhat-release tells me: Red Hat Enterprise Linux Client release 5.8 (Tikanga)

    Read the article

  • Ideas for scaling out database architecture

    - by andrew
    We're looking to scale out our existing database architecture and need some advice on which way to go. We currently have 2 web servers behind a load balancer that both read & write to a single master database which replicates to a slave. Ideally, I'd like each of the webservers to point to their own master DB and have the data between the 2 synchronised but from what I've read, using any kind of master-master or ring-replication is discouraged. I'm looking for a general "what do other people do" kind of answer - database vendor isn't a concern at the moment but we'd like to stay with MySQL or convert to MSSQL. Any ideas would be gratefully received. Many thanks, Andrew

    Read the article

  • radius traffic accounting - what attributes do I use for traffic (and how)

    - by Mark Regensberg
    we are building a web front end for a internet access token management system that uses radius (freeradius) queried from a captive portal. Reason for building this part is the integration into the accounting and billing platform that operates behind the scenes (all other parts are currently available open source software) The structure is fairly standard, and setting up the basic bits were easy enough (authentication, traffic updates from the captive portal, account expiry date/times) - but I seem to have run out of ability when it comes to limiting an account by traffic consumed. So we can: set up usernames / passwords set expiry dates/times for a given user see the traffic for that user being accurately updated in RADACCT But we can't figure out the correct way/attribute to expire a user when they have consumed X octets of traffic. What attributes are used, or - maybe more accurately - what would be the correct way to use these attributes to limit an account to a certain volume of traffic? Any links to documentation appreciated - freeradius documentation doesn't seem to address the issue directly, or I'm looking in the wrong place... --mark

    Read the article

  • How can I track down what part of pfsense is blocking website access?

    - by Chase Florell
    I've got a PFSense firewall/gateway on our network. Everything works great except for the fact that I cannot access one specific website. Pfsense is running the following packages Country Block LightSquid nmap notes squid squidGuard Strikeback I can access every single website I've ever tried aside from one that we need for business use (http://bridalnetwork.ca) here's the traceroute frodo:~ chase$ traceroute bridalnetwork.ca traceroute to bridalnetwork.ca (192.197.103.73), 64 hops max, 52 byte packets 1 rohan (192.168.5.1) 6.618 ms 1.662 ms 9.207 ms 2 * * * 3 * * rohan (192.168.5.1) 7.225 ms !H 4 rohan (192.168.5.1) 5.314 ms !H 5.701 ms !H 7.573 ms !H frodo:~ chase$ How can I figure out what the reason behind the blockage is? note: this has been tested on every computer on the network with the same results. ps: the pfsense box is 'rohan' (192.168.5.1) Here's what I get with Squid enabled and here's what I get with Squid disabled

    Read the article

  • How to remove package from apt-get autoremove "queue"

    - by Darth
    I just installed Calibre for ebook management via apt-get on Ubuntu 10.04, however I found out that it's one major version behind the current release, so I decided to reinstall it directly from sources. When I uninstalled the packaged version, apt added bunch of dependencies to the autoremove queue, and as I installed newer version of Calibre from sources, it has no knowledge of it being dependent on those packages. Now I basically have all libraries that I want, but they are still in the autoremove queue. The following packages were automatically installed and are no longer required: libqt4-script libqt4-designer libqt4-dbus python-lxml python-cherrypy3 python-encutils libqt4-xmlpatterns libqt4-help python-qt4 python-clientform python-sip python-django python-mechanize libqt4-svg python-django-tagging libphonon4 libqt4-xml libqt4-assistant libqt4-webkit libqt4-scripttools python-beautifulsoup python-pypdf python-dateutil python-cssutils Use 'apt-get autoremove' to remove them. How do I tell apt that I want to keep these packages installed, without reinstalling them manually?

    Read the article

  • pip install fails on guest Linux Mint 15

    - by synergetic
    On my Windows 7 PC, I installed VMware VM for Linux Mint 15. Windows PC is behind corporate firewall /proxy server. Now inside Linux I issued: sudo apt-get install python-virtualenv Then created ~/projects folder and python virtual environment: mkdir projects cd projects virtualenv venv Then activated my virtual env: . venv/bin/activate So far no problem. Then tried to install python libraries, for example markupsafe: pip install markupsafe It throws an error: Cannot fetch index base URL https://pypi.python.org/simple/ Could not find any downloads that satisfy the requirement markupsafe No distributions at all found for markupsafe Storing complete log in /home/me/.pip/pip.log Inside pip.log I found: <urlopen error [Errno 104] Connection reset by peer> Installing any other library throws similar error. What's wrong here?

    Read the article

  • Hardware Lossless Compression for Hard Drives?

    - by GeoffreyF67
    I happened across this article about hardware based hard drive encryption and realized that not only would this give a great way to protect your data but it would also speed up the applications that we use to encrypt that data. This lead me to wonder... Would it be possible to do the same thing for compression so that all of the data is compressed or uncompressed appropriately as it is read and written to the drive? I haven't done any firmware programming in quite some time so I'm not even sure this is technically possible. If it were, however, it could probably give quite a bit more storage space to folks. What are the pros and cons of programming such an approach to be used in the firmware? G-Man

    Read the article

  • C++ debugging help for C# programmer

    - by ddm
    I'm embarrassed to post this but it's been awhile since I worked in C++, been with C# for awhile. I'm converting old (not written by me) vs2003 and 05 C++ code to vs 08. In addition to lots of lumps during conversion, I want to add debug logging so I can monitor what is going on when I attach with windbg. I've searched the archives here and ms and I think it's using Debugger.Log(...) but not sure. I also remember years ago launching a debug monitor to catch the logging. So the call to some experts that have a better memory than I. What call(s) can I make (without the DEBUG compile directive - need to watch release code) to catch the logging in wind bag? I followed a couple of debugging links from SO posts but they were dead. Thanx - Old Man.

    Read the article

  • arp problems with transparent bridge on linux

    - by Mink
    I've been trying to secure my virtual machines on my esx server by putting them behind a transparent bridge with 2 interfaces, one in front, one at the back. My intention is to put all the firewall rules in one place (instead of on each virtual server). I've been using as bridge a blank new virtual machine based on arch linux (but I suspect it doesn't matter which brand of linux it is). What I have is 2 virtual switchs (thus two Virtual Network, VN_front and VN_back), each with 2 types of ports (switched/separated or promiscious/where the machine can see all packets). On my bridge machine, I've set up 2 virtual NIC, one on VN_front, one on VN_back, both in promisc mode. I've created a bridge br0 with both NIC in it: brctl addbr br0 brctl stp br0 off brctl addif br0 front_if brctl addif br0 back_if Then brought them up: ifconfig front_if 0.0.0.0 promisc ifconfig back_if 0.0.0.0 promisc ifconfig br0 0.0.0.0 (I use promisc mode, because I'm not sure I can do without, thinking that maybe the packets don't reach the NICs) Then I took one of my virtual server sitting on VN_front, and plugged it to VN_back instead (that's the nifty use case I'm thinking about, being able to move my servers around just by changing the VN they are plugged into, without changing anything in the configuration). Then I looked into the macs "seen" by my addressless bridge using brctl showmacs br0 and it did show my server from both sides: I get something that looks like this : port no mac addr is local? ageing timer 2 00:0c:29:e1:54:75 no 9.27 1 00:0c:29:fd:86:0c no 9.27 2 00:50:56:90:05:86 no 73.38 1 00:50:56:90:05:88 no 0.10 2 00:50:56:90:05:8b yes 0.00 << FRONT VN 1 00:50:56:90:05:8c yes 0.00 << BACK VN 2 00:50:56:90:19:18 no 13.55 2 00:50:56:90:3c:cf no 13.57 the thing is that the server that are plugged in front/back are not shown on the correct port. I suspect some horrible thing happening in the ARP-world... :-/ If I ping from a front virtual server to a back virtual server, I can only see the back machine if that back machine pings something in the front. As soon as I stop the ping from the back machine, the ping from the front machine stops getting through... I've noticed that if the back machine pings, then its port on the bridge is the correct one... I've tried to play with the arp_ switch of /proc/sys, but with no clear effect on the end result... /proc/sys/net/ipv4/ip_forward doesn't seem to be of any use when using a bridge (seems it's all taken care of by brctl) /proc/sys/net/ipv4/conf//arp_ don't seem to change much either... (tried arp_announce to 2 or 8 - like suggested elsewhere - and arp_ignore to 0 or 1 ) All the examples I've seen have a different subnet on either side like 10.0.1.0/24 and 10.0.2.0/24... In my case I want 10.0.1.0/24 on both side (just like a transparent switch - except it's a hidden fw ). Turning stp on/off doesn't seem to have any impact on my issue. It's as if the arp packets where getting through the bridge, corrupting the other side with false data... I've tried to use the -arp on each interface, br0, front, back... it breaks the thing altogether... I suspect it has something to do with both side being on the same subnet... I've thought about putting all my machine behind the fw, so as to have all the same subnet at the back... but I'm stuck with my provider's gateway standing at the front with part of my subnet (in fact 3 appliance to route the whole subnet), so I'll always have ips from the same subnet on both side, whatever I do... (I'm using fixed front IPs on my delegated subnet). I'm at a loss... -_-'' Thx for your help. (As anyone tried something like this? from within ESXi?) (It's not just a stunt, the idea is to have something like fail2ban running on some servers, sending their banned IP to the bridge/fw so that it too could ban them - saving all the other servers from that same attacker in one go, allowing for some honeypot that would trigger the fw from any kind of suitable response, and stuffs of the sort... I am aware I could use something like snort, but it addresses some completely different kind of problems, in a completely different way... )

    Read the article

  • BlueCoat reverse proxy NTLM authentication

    - by mathieu
    Currently when we want to access an internal site from Internet (IIS with NTLM auth), we have two login screens that appear : step1 : LDAPAuth, from the BlueCoat that check login/password validity against Active Directory step2 : NTLM auth, from our application. Is it possible to configure the reverse proxy to use the LDAP credentials provided at step1, and give them to whatever application that requests them ? Of course, if those credentials aren't valid, nothing happens. We're using BlueCoat SG400. Update : we're not looking for SSO where the user doesn't have to enter a password. We want the user to enter his domain credentials in the LDAPAuth dialog box, and the proxy to reuse it to authenticate against our application. Or any application that uses NTLM. We've only got 1 AD domain behind the reverse proxy.

    Read the article

  • OS X Lion: Emptying the trash takes "forever": is using rm -r safe?

    - by EOL
    Emptying my Trash in OS X Lion (non securely) is taking about three hours (about 1.5 million files, from a Time Machine backup). I had to stop the process a few times already, because I could not move my laptop with the external harddrive the files are on. This is also a problem because the Trash emptying is restarted from the very beginning each time I empty the Trash again (i.e., files are not deleted when the Trash emptying is aborted). I read that it is faster to use rm -rf on ~/.Trash, in this case. However, is this safe? (I am afraid that does OS X Lion performs tasks behind the scenes—which would explain its slowness—that rm -r does not, which could lead to problems in the future.)

    Read the article

  • How do I restore my system from a "Backup and Restore Center" backup?

    - by Daniel R Hicks
    The Windows (Vista) documentation and available online info is comprehensively vague. If I have a moderately brain dead system and want to restore it, and I have a "Backup and Restore Center" backup whose "delta" is not quite a week old (but with a "full backup" behind it), what steps do I go through to recover my box back to that backup point? It's totally unclear whether simply doing "restore all" from the (advanced) "Center" is sufficient, or do I need to first take the box back to day zero with the system restore DVD, et al? (Just editing this to get my correct ID associated with it.)

    Read the article

  • Huawei b260a gsm modem not forwarding gre for pptp tunnel

    - by Priit
    I have a huawei gsm modem that does not want to let gre through. The goal is to connect into a pptp server thats behind the huawei. In the modems port forwarding settings theres a ready made profile for pptp (1723). After activating that the MS pptp test tools show that connection is being initiated but no gre packets make it to the server. After taking a closer look into the modems iptables rules theres nothing in there about gre. So I tried making gre rules manualy into forward and preroute chains without any success what so ever. As far as I can tell theres no ip_gre module present on the device is that needed for gre forwarding? Thats what I'm afraid of that it doesn't support gre in NAT but how would I turn it into a bridge? The wan interface is ppp0 so bridging it with eth0 would not work right? Is there some iptables rule I could use to make the modem let all the traffic just straight through?

    Read the article

  • Install a vimball from the command line.

    - by Robert Massaioli
    As this post points out you can install Vimballs using the normal: vim somevimball.vba :so % :q But if you want to install a from the command line how do you do it? I ran a 'man vim' and it seems like the best "from source install" option was the '-S' option so I tried to install haskellmode with it: wget 'http://projects.haskell.org/haskellmode-vim/vimfiles/haskellmode-20090430.vba' vim -S haskellmode-20090430.vba and that failed to work. It gave me the following error: Error detected while processing function vimball#Vimball: line 10: (Vimball) The current file does not appear to be a Vimball! press ENTER or type command to continue It should be noted that using the first method I was able to successfully install the vimball. I have tried the second method on a few other vimballs and it has failed every time. Is there a way to install a vimball from the command line? It seems like a useful sort of task. Oh, and I am running the following version of vim: Version: 2:7.2.330-1ubuntu3 Thanks.

    Read the article

  • New graphics card (GTX 760) slowing down entire PC

    - by Cayetano Gonçalves
    My new graphics card is making my PC totally unusable. It boots up really slowly, and when the windows screen comes on, the mouse lags really far behind. Nothing opens at a normal speed. However, when I put in my 5-year old graphics card, it all works fine. I'm currently using a Foxconn Renaissance LGA 1366 Intel X58 ATX Motherboard, Intel Motherboard Intel Core i7-950 Bloomfield 3.06GHz LGA 1366 130W Processor, and a EVGA SuperNOVA 850G2 80PLUS Gold Certified ATX12V/EPS12V 850W Power Supply . I know it can't be the power supply, because I just bought it today to try to fix the problem. I've also installed the newest version of BIOS available for my motherboard. I've also seen extreme variations in CPU while the new graphics card is in, and when the old graphics card is installed, it is much calmer. Any thoughts?

    Read the article

  • UTP cable for telephone line possible?

    - by Chris
    Hi, One of my customers has build a new house with pre-installed cables for internet. The only thing he didn't think about was installing a cable for his telephone line. Behind his desk, he has a "spare" UTP cable, my question. Can this cable be used to replace a telephone line. This client has a internet and telephony contract, using a experiabox phone/internet modem. Any help would be great. I knowe I have to use a RJ11 plug.

    Read the article

  • How to make Outlook Calendar reminders pop up in Windows 7

    - by thursdaysgeek
    I'm just starting to use Windows 7 and I want to know how to make my Outlook reminders pop up and show themselves. They keep opening discretely, quietly as just another Outlook entry on the taskbar. And I keep overlooking them, because they pop up behind everything else. How do I make them less easy to overlook? (Yeah, usually you don't want obnoxious apps that push themselves to the forefront. But there are a few places where I do want that, and Outlook calendar reminders are one of them.)

    Read the article

  • Routing only some local IPs through VPN on dd-wrt

    - by bo-inge-ostberg
    Much similar to this entry: http://serverfault.com/questions/94283/using-dd-wrt-to-connect-to-vpn-and-forward-all-traffic-of-certain-devices-through , I have set up my router with dd-wrt + OpenVPN to connect to a VPN. This works fine, and all traffic from behind the router goes through the VPN. How do I route(?) traffic in the router so that only certain IPs from the LAN will go through the VPN, while the others take the "normal" route? Is it also possible to allow traffic from certain local IPs to go ONLY through the VPN, making it impossible for them to use the regular internet connection if the VPN is down? I know this question was answered in the post I linked to, but that just doesn't seem to work for me. The routing table and rules change, but traffic still just goes through the VPN.

    Read the article

  • NSMutableString leaks on append or replaceOccurrencesOfString

    - by John
    Hello Folks, I know similar questions have been asked time and time again but I ask that you please bear with me as I cannot seem to find an answer that helps. My application has leaks that are driving me out of my mind. Actually, they are not reported as leaks using Leaks, but my net bytes in ObjectAlloc goes up and up and up and never stops, eventually leading to a crash if it goes on long enough (not very long). The problem occurs with NSMutableStrings. I think there is either something fundamental I don't understand about them, or I am facing another problem that I am having difficulty tracking down but keeps hiding behind the NSMutableStrings. Specifically, I am noticing that whenever I append to or perform a replace on a NSMutableString, ObjectAlloc reports what appear to be mismatches in malloc/frees behind the scene when resizing the NSMutableString. I'm sorry to say this is the second time I'm facing this problem - the first time I messed around for hours and hours and finally the problem went away (magic!) but I don't really know why. When I look at the code below (and believe me, I've stared at it for hours) I cannot see the problem. I look at the code and think to myself that I should be fine because I'm releasing the only object for which I am responsible (aString) and that NSMutableString should be taking care of cleaning up after any resizing it does. In the second example, just so you know in case it helps, the string being passed in comes from an ASIHTTPRequest object (it's the responseString) and I don't do anything at all with it. It's being called simply like so ([self DoStuff2:[request responseString]]) and I don't free the request myself either (I'm using a ASINetworkQueue and I assume that the requests are destroyed for me (I tried and caused errors because the request was already being release somewhere else). Also, I know it shouldn't do anything, but I even tried wrapping the code in autorelease pools, which of course did nothing. I should mention that this code is being run inside of an NSOperation. I thought that perhaps I am experiencing problems because NSOperations should create an autorelease pool for themselves, but I've tried that to no avail. Not related to NSMutableString, but I find I also have similar problems using the NSString componentsSeparatedByString method. Sometimes the memory used by the array that gets the separated components is never released. Hmmm...strings in general seem to be somewhat problematic for me it seems. I would appreciate ANY help anyone can provide. If you require more info, I'll be glad to add it. I do promise you that I've struggled with this (and other problems) for weeks and every problem I encounter I research hard and long until I find a solution - this is not an idle request, but a true cry for help! I've written so much code and now I'm trying to seal some small leaks etc and I notice this problem. Honestly, I cannot believe how memory management in Objective C can stump me so at times...I've read Apple's memory mgmt docs many times and I thought I thoroughly understood it and I try to be diligent about releasing objects I own, but sometimes I find myself wondering if I truly understand...I would like to put this to bed once and make sure I understand all this fully - to have this sort of question/problem after writing thousands of lines of code is more than a little scary/embarrassing/annoying. So again, if anybody has any insight, I'd be grateful. Thanks for your time and efforts. -(void)DoStuff { NSString *aString [ [[NSString alloc] initWithFormat:@"text %@ more text", self.strVariable]; [self.someMutableStringVar replaceOccurrencesOfString:@"replace" withString:aString options:NSCaseInsensitiveSearch range:NSMakeRange(0, [self.someMutableStringVar length])]; [aString release]; } -(void)DoStuff2:(NSString *)aString { [self.someMutableStringVar appendString:aString]; }

    Read the article

  • How to start Windows Explorer as domain administrator [closed]

    - by Otiel
    Possible Duplicate: How do you run windows explorer as a different user? Is it possible to start a Windows Explorer with the rights of another domain user? I tried to do the following to start a Windows Explorer on my computer as my domain Administrator, but without success: Right click on C:\Windows\explorer.exe to select Run as different user, Enter the domain administrator credentials: Domain\Administrator ************ The windows explorer session only opens with my current user rights (Domain\me). The reason behind my question is that I want to change some folder rights on a domain shared disk and I need the Domain\Administrator user rights to do it. Usually, I do it by login as Domain\Administrator on the server hosting the shared disk but I would like to be able to do it from my PC, logged as my current login (Domain\me). EDIT As seen in the linked posts, it is not possible anymore on Windows Vista or 7. On Windows XP, the solution is to do: runas /user:domain\username "explorer /separate"

    Read the article

  • Porting a piece of Lisp code to Clojure (PAIP)

    - by Robert Brown
    I'm reading Paradigms of Artificial Intelligence Programming (PAIP) by Peter Norvig and I'm trying to write all the code in Clojure rather than common Lisp. However I'm stuck on this piece of code on page 39: (defparameter *simple-grammar* '((sentence -> (noun-phrase verb-phrase)) (noun-phrase -> (Article Noun)) (verb-phrase -> (Verb noun-phrase)) (Article -> the a) (Noun -> man ball woman table) (Verb -> hit took saw liked)) "A grammar for a trivial subset of English.") (defvar *grammar* *simple-grammar*) How can I translate this into Clojure? Thanks.

    Read the article

  • Linux bash: when to use egrep instead of grep?

    - by Michael Mao
    Hi all : I am preparing for a Linux terminal assessment now, I tried to Google and found most resources are referring to the basic "grep" rather than the more powerful "egrep" -- well, that is at least what the professor said in lecture. I am always working with small samples so performance tuning is a thing too far away. So basically I'd like to know are there any areas where I must switch to egrep to do it in a better way? Is it safe to work with basic "grep" as for now? will there be potential risks? Sorry about my limited knowledge on Linux shell commands, the man page looks like a maze to me and honestly I haven't put much time in understanding all the features both command provide.

    Read the article

< Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >