Search Results

Search found 10169 results on 407 pages for 'port'.

Page 134/407 | < Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >

• DD-WRT Router acting as a Switch and Wi-Fi AP

  - by dotnetchris

  Recently I upgraded to Comcast Business and their modem has a built-in router so I took off my DD-WRT router and moved to a location in my home where I needed more ports and Wi-Fi (preferably without running new Ethernet cables since it's 50-100 foot run through floor and ceilings). I have my network cable from my Comcast modem going into Port 1 of my DD-WRT router with Port 2 and 3 being networked PCs. I have DD-WRT setup as a DHCP forwarder with the firewall disabled. This lets my all of my devices access the network fine. Is the correct the way to do this? Or is this a less optimal solution and it should be done in a slightly different way?

  Read the article

• network design to segregate public and staff

  - by barb

  My current setup has: a pfsense firewall with 4 NICs and potential for a 5th 1 48 port 3com switch, 1 24 port HP switch, willing to purchase more subnet 1) edge (Windows Server 2003 for vpn through routing and remote access) and subnet 2) LAN with one WS2003 domain controller/dns/wins etc., one WS2008 file server, one WS2003 running Vipre anti-virus and Time Limit Manager which controls client computer use, and about 50 pcs I am looking for a network design for separating clients and staff. I could do two totally isolated subnets, but I'm wondering if there is anything in between so that staff and clients could share some resources such as printers and anti-virus servers, staff could access client resources, but not vice versa. I guess what I'm asking is can you configure subnets and/or vlans like this: 1)edge for vpn 2)services available to all other internal networks 3)staff which can access services and clients 4)clients which can access services but not staff By access/non-access, I mean stronger separation than domain usernames and passwords.

  Read the article

• How to hack airport extreme to support USB 3G modem?

  - by Mike Caron

  Has anyone out there ever tried to hack the Airport Extreme, specifically with regard to the USB port? There are many cellular routers available that provide WiFi sharing of a USB modem link. However, instead of buying yet another router, I'd like to use my expensive Airport Extreme with it. The AE has a USB port on the back, but it's been said that it only talks to printers. Is there a way to hack the USB driver on the AE to allow it to recognize a USB modem, then use that as the connectivity instead of the LAN? I would imagine that one could use OpenFirmware to boot something on the AE. If one can boot it, then one could provide access using SSH across the lan. Once access is granted, then let the hacking begin... but I don't know how to (a) get the mini-osx on to USB (is it the same as the ATV without a UI?) or (b) how to load up certain things once boot has begun.

  Read the article

• Setting CATALINA_OPTS for tomcat6 on windows doesn’t work.

  - by Ben

  (I've copied this from Stack Overflow here, after someone suggested I post the question here) Hi, I'm trying to setup Tomcat6 to work with JMX on Windows Vista 64. To do that I need to pass the parameters below to Tomcat6. What I do in command prompt. (that doesn't work) set CATALINA_OPTS="-Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.port=9898 -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=false" tomcat6.exe What I do that does work (but causes other problems) java -Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.port=9898 -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=false -jar bootstrap.jar It seems as if tomcat is just ignoring the environment variable CATALINA_OPTS. Am I doing something wrong? I've also tried to edit catalina.bat and define the variable CATALINA_OPTS there. No success. (tried adding the parameters to JAVA_OPTS too, no success either) Thanks in Advance!!

  Read the article

• how to reset the IIS settings ..

  - by infant programmer

  I had been practicing ASP on my local machine.. I just wanted to change the TCP port address to 8080 and that is what I did, since then the URL "http://localhost/" is showing PAGE CANNOT BE DISPLAYED, and technical reason being shown is : "You have attempted to execute a CGI, ISAPI, or other executable program from a directory that does not allow programs to be executed." I tried to change back the TCP port address to 80, (which is default) but its not making any difference. What should I do now, to make localhost to work as before ? When I create a virtual directory for the same path "C:/InetPub/wwwroot" then it works but with this URL "http://localhost/virualname/filename.asp" .. where as "http://localhost/filename.asp" throws error, as mentioned above. Can you please explain me what is this consequence is?? thank you :) Details: IIS verion is 7, OS XP,

  Read the article

• Unable to run openoffice in headless mode

  - by uswaretech

  I want to automoate some PPT - PDF conversions, so I want to run openoffice in headless mode for scripting. On my machine with X running I can start opemoffice in headless mode via soffice -accept="socket,port=8100;urp;" -headless This doesn't seem to work on a server with X not running. $ soffice -accept="socket,port=8100;urp;" -headless /usr/lib/openoffice/program/soffice.bin X11 error: Can't open display: Set DISPLAY environment variable, use -display option or check permissions of your X-Server (See "man X" resp. "man xhost" for details) $ The error doesnt seem to make sense as well, as the point of specifying -headless was so that I do not need X, while this command seems to look for X.

  Read the article

• 8051 MCU debug board function

  - by b-gen-jack-o-neill

  Hi, in school I have written many programs for 8051 compatible CPU. But I never actually knew how our "debug" sets worked. I mean, we test our programs in special sets, which actually allow you to very simply load program to CPU via PC serial port. But I thing you know this musch more better than I. But how it works? I mean, I know there is chip which adjusts signal level from PC serial port to TTL logic, and than connected to serial line of 8051. But thats all I know. Actually even my teacher doesen´t know how it works, since school bought it all. So, I suspect there is some program already running in the 8051 which handles communication and stores your program into memory, am I right? But, how can you make 8051 to process instructions from different location than ROM? Becouse if I am right, you cannot write into ROM memory by any instruction, as well as 8051 can only read instructions from ROM?

  Read the article

• Mounting NFS share between OSX and Centos VM

  - by Adam

  I'm having issues mounting an NFS share I've made on my Mac host (server) from a Centos VM (client). I'm getting a permission denied error. I have this line in /etc/exports on server: /Users/adam/Sites/ 192.168.1.223(rw) and in /etc/fstab on client: 192.168.1.186:/Users/adam/Sites/ /home/adam/Sites/ nfs rw 0 0 I'm sure this is a simple configuration issue, but I've never set up NFS properly before. Extra info: # mount -v 192.168.1.186:/Users/adam/Sites/ /home/adam/Sites/ mount: no type was given - I'll assume nfs because of the colon mount.nfs: timeout set for Mon Nov 26 07:31:40 2012 mount.nfs: trying text-based options 'vers=4,addr=192.168.1.186,clientaddr=192.168.1.223' mount.nfs: mount(2): Protocol not supported mount.nfs: trying text-based options 'addr=192.168.1.186' mount.nfs: prog 100003, trying vers=3, prot=6 mount.nfs: trying 192.168.1.186 prog 100003 vers 3 prot TCP port 2049 mount.nfs: prog 100005, trying vers=3, prot=17 mount.nfs: trying 192.168.1.186 prog 100005 vers 3 prot UDP port 958 mount.nfs: mount(2): Permission denied mount.nfs: access denied by server while mounting 192.168.1.186:/Users/adam/Sites/

  Read the article

• Running jira at jira.[my domain].com

  - by Ivan Zamylin

  I have jira installed on my server. It was running at http://[my ip address]:8100. I could manage to change it to http://jira.[my domain].com. Now after I access it at http://jira.[my domain].com, a browser path changes to http://jira.[my domain].com:8100/secure/Dashboard.jspa. Why does the port show up? Is there any way to remove 8100 port from this redirect. I'd like it to be http://jira.[my domain].com/secure/Dashboard.jspa Also my jira now responds both to jira.[my domain].com and [my ip address]:8100. The latter one is corrupted. Is it possible to stop user accessing it? Thank you!

  Read the article

• Dual Nic, one keeps dropping

  - by user1215018

  I'm running windows server 2008 r2 on a dell poweredge 2850. I have 2 NICs, one is configured behind a firewall with a dhcp server on the main local LAN and another one has it's own dedicated connection to one of our 13 static IPs. So in a nutshell we have 2 of our static IPs going to this server, one indirectly through a firewall/dhcp server, and the other directly. I am trying to reach IIS on port 80 and port 443. The problem is that the NIC with the direct connection (NIC2) keeps dropping and says either "No internet connection" or "Unauthenticated". However, the NIC behind the firewall (NIC1) has no problems at all. Update: This is the second time this has happened in 3 days and each time the fix has been enabling the dhcp client on the NIC, allowing it to error out to a 169.x.x.x address, then re-enabling the nic with it's static IP assignment.

  Read the article

• Configuring VLAN's on two HP procurve switches

  - by pan

  Trying to route a new ISP (Microwave link) from one of my out buildings to my computer room and hence my firewall. Old ISP came direct into firewall. In the outbuilding the Microwave modem connects with cat5 to HP Procurve 2524 switch. Because this ISP is coming through my internal network, I plan on using a new vlan called "airspeed" only for this ISP traffic. Up until now I've just been using the Default_vlan on both HP switches (4108 + 2524). So far I've been unable to ping from my laptop to the ISP modem both of which are on the new vlan 2 ("Airspeed"). No traffic needs to cross from vlan 2 to vlan 1 so I've left the ports as untagged. I've used the subnet provide from my ISP as the new vlan 2 subnet. Can anybody see what I'm doing wrong here? I've added the configuration of both switch below. Rough diagram: Microwave modem (Gateway IP 77.75.00.49) | HP 2524 switch (port 24) | HP 2524 switch fibre link | HP 4108GL switch fibre link | HP 4108GL switch (port D1) | Laptop configured with IP 77.75.00.50 (for testing but will be connected to firewall) And my 4108GL config: ; J4865A Configuration Editor; Created on release #G.07.21 hostname "HP ProCurve Switch 4108GL" cdp run module 1 type J4864A module 2 type J4862B module 3 type J4862B module 4 type J4862B ip default-gateway 128.1.146.50 snmp-server community "public" Unrestricted snmp-server host 128.1.146.51 "public" Not-INFO snmp-server host 128.1.146.38 "public" vlan 1 name "DEFAULT_VLAN" untagged A1-A3,B1-B24,C1-C24,D2-D24 ip address 128.1.146.203 255.255.0.0 no untagged D1 exit vlan 2 name "Airspeed" untagged D1 ip address 77.75.00.51 255.255.255.248 exit Finally my 2524 config: ; J4813A Configuration Editor; Created on release #F.04.08 hostname "HP ProCurve Switch 2524" cdp run ip default-gateway 0.0.0.0 snmp-server community "public" Unrestricted snmp-server host 128.1.146.51 "public" Not-INFO snmp-server host 128.1.146.51 "public" snmp-server host 128.1.146.38 "public" vlan 1 name "DEFAULT_VLAN" untagged 1-23,25-26 no untagged 24 ip address 128.1.146.204 255.255.0.0 exit vlan 2 name "Airspeed" untagged 24 ip address 77.75.00.51 255.255.255.248 exit no aaa port-access authenticator active

  Read the article

• convert bat to sh

  - by Cris

  I am totally new to scripting in linux...so i want to port some simple window bat files to ubuntu. First file is easy setenv.bat set ANT_HOME=c:\ant\apache-ant-1.7.1 set JAVA_HOME=c:\java in linux i did this and it seems ok setenv.sh #!/bin/bash JAVA_HOME=/usr/lib/jvm/java-6-sun-1.6.0.24/ ANT_HOME=/usr/share/ant echo $JAVA_HOME echo $ANT_HOME but now i want to port this bat file: startserver.bat call ../config/setenv call %ANT_HOME%/bin/ant -f ../config/common.xml start_db call %ANT_HOME%/bin/ant -f ../config/common.xml start_server pause but i have no clue how can i do this in linux call ../config/setenv thank you for any help , direction given.

  Read the article

• Two SATA HDDs connected using a Black Duet HDD Docking Station via eSATA to my Laptop, second drive

  - by leeand00

  Hi I am using a BlacX Duet HDD Docking Station to connect a 1TB WD Caviar Black SATA HDD (WD10000LSRTL) and a HITACHI SATA DESKSTAR (0S00163) to my G51VX (BestBuy) laptop via the eSATA port. When I plug in both HDDs in to the Docking Station, connect the docking station to my laptop and start Windows 7 (64-bit Ultimate), only the HDD in the first drive in the port actually shows up in My Computer and Disk Management. If I swap the drives positions I can get them both to work, but never at the same time. I also checked in the bios settings on the laptop, under Advanced-IDE Configuration-SATA Operation Mode, and it displays: SATA Operation Mode: [Enhanced] AHCI Port0 [Hard Disk] Device: Hard Disk Vendor: ST9320421AS LBA Mode: Supported S.M.A.R.T.: Supported AHCI Port5 [Hard Disk] Device: Hard Disk Vendor: Hitachi HDS721010CLA332 Size: 100.00 GB LBA Mode: Supported S.M.A.R.T.: Supported There should be a third drive, but I'm not certain why it is not being picked up. Additionally, before I played around with the settings in the IDE configuration, it used to display the DVD as well.

  Read the article

• Looking for a USB Thumbdrive / Flash drive encryption solution (not TrueCrypt)

  - by Max888

  I am looking for a USB Thumbdrive / Flash drive encryption solution. I have searched the net but I have never come accross a solution which meets the following: Must handle at least 4GB volume If possible, fully portable (no install required required) Does not require admin rights in order to access/write encrypted files on the flash drive Does not corrupt data should the flash drive is removed from a USB port and the data is in a 'unencrypted' status Data is automatically encrypted if the flash drive is removed from a USB port and the data is in a 'unencrypted' status Portable apps must be able to run from the 'unencrypted' volume (in non-admin mode) PLEASE do not mention TrueCrypt as I am not considering (especially for wish list #3) Many thanks! Update 5th October 2009: Still unresolved.

  Read the article

• Setup Cisco RVS4000 QOS for VOIP

  - by andyknas

  Just switched from dedicated T1's with analog phone lines to cable modem with 10/2 uplink. We're having some VOIP call quality issues on the outgoing side when bandwidth is stressed and I need to setup QOS or a VLAN on our RVS4000 router. Currently all phone traffic (talkswitch device and ip phones) are on it's own d-link PoE switch, and all workstations are on a LinkSys 1GB switch. Both switches are plugged into ports on the RVS4000. I'd like to set it up so that the dlink port has ~512Mbsp dedicated to it for voice at all times. It's my understanding that with a VLAN or QOS I can set this up. I've got QOS setup already with port 5060 to have high priority but it doesn't seem to make a difference.

  Read the article

• IPcop Multiple WAN Subnets

  - by obsidian

  We have an IPcop firewall and have had no issues with it. We've had a block of 10 IP addresses from our colocation provider and have been able port forward from those to internal servers as needed. We've recently needed additional IPs and the colocation provider issued an additional block of 10. The problem: The 10 new IP addresses issued are in a different subnet with a different gateway. The question: How do I add the new gateway into IPcop? How do I make it so that any outbound traffic in response to any inbound traffic from a new IP go back out through the new gateway? I attempted to add a static route via the console using the following command: route add -net x.x.x.x gw x.x.x.x netmask 255.255.255.192 I also added the new IPs as aliases and setup port forwarding as I've done with the existing IP block. However, when I attempt to access a web server from an external workstation, it just times out. Thanks in advance for your assistance.

  Read the article

• Is bonding mode=5 a solution against MAC flapping?

  - by Yuri

  There is two are interconnected Cisco WS-2950T. By the one GBIC port on first switch connected a first NIC of bonding interface, and by the one GBIC port on second switch connected a second NIC of bonding interface. Of course the both switches sees the bonding MAC-address only on one interface (eg it is GBIC on first switch) and all incoming traffic for bonding interface passes through this GBIC. But in "mode=5" all outgoing traffic are distributed between the all interfaces that make bond. In this case, the packets will be dropped from the second switch and anyway will going through the first switch? Or the division will be working?

  Read the article

• 10/100 Network performing at 1.5 to 2.0 megabyte per second - is that below normal?

  - by burnt1ce

  This comes out to about 12 to 16 megabit/seond. I've read in forums that people are getting much higher speeds (ie: "40-60 Mb/s" http://forums.cnet.com/5208-7589_102-0.html?threadID=265967). I'm getting my benchmark by having a unmanged 5 port switch connected to a WRT54GS router connect. I'm sending a file from a computer connect to the WRT54GS to another computer that's connect to the unmanaged 5 port switch. Is the linkage of the switch causing this massive overhead? i doubt it. What could explain the slow down? electrical interference?

  Read the article

• Virtualbox two networks slow

  - by Petr Marek

  I am running an Ubuntu server guest on Win 7 guest, and am running a webrick server (RoR dev). If I have just a host-only network, everything works fine and the browser response is instant. However, if I add a second network (NAT), so that the server can connect to the internet (for various updates etc.), the host-to-guest access gets really slow. I can't use the bridge connection. I am using the port 3000 (RoR Webrick server) and connecting to the guest via internet browser on this port (eg http://192.168.56.102:3000). Any idea, what could be causing this? If I ping the IP from host console, I get < 0ms. Here are the settings (relevant info is in english; Povoleno vše is Everything is allowed):

  Read the article

• How to understand the LSI HBA connector specs?

  - by Sandra

  When reading the specifications for the LSi SAS 9206-16e HBA, it says Storage Connectivity; Data Transfer Rates * 16 ports; 6Gb/s SAS 2.1 compliant SAS Bandwidth * Half Duplex 2400MB/s, x4, 6Gb/s SAS lanes Port Configurations * 16 ea, x1 ports (individual drives) * 4 ea, x4 wide ports * 2ea, x8 wide ports Connectors * Four (x4) mini-SAS HD external connectors (SFF8644) So there are 4 physical connectors. Question What is the bandwidth for each of the connectors? I would be temped to say 6Gb/s * 4, but then it mentions the "Port Configurations" and 2ea, 4ea, 16ea, which I don't understand what is. Does this mean, that the 4 physical connectors are not identical?

  Read the article

• SMTP server (IIS) is running but can't test it with telnet

  - by NitroxDM

  I have a Windows 2003 web edition server that I can't seem to get the SMTP relay working. BT4 shows port 25 open. When I try use telnet to test it on my desktop I get: Connecting To XXX.XXX.XXX.XXX...Could not open connection to the host, on port 25: Connect failed. From the server I get: Microsoft Telnet> o 127.0.0.1 25 Connecting To 127.0.0.1... Connection to host lost. There isn't anything useful in the logs. Any ideas?

  Read the article

• Linux - Only first virtual interface can ping external gateway

  - by husvar

  I created 3 virtual interfaces with different mac addresses all linked to the same physical interface. I see that they successfully arp for the gw and they can ping (the request is coming in the packet capture in wireshark). However the ping utility does not count the responses. Does anyone knows the issue? I am running Ubuntu 14.04 in a VmWare. root@ubuntu:~# ip link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff inet6 fe80::20c:29ff:febc:fc8b/64 scope link valid_lft forever preferred_lft forever root@ubuntu:~# ip route sh root@ubuntu:~# ip link add link eth0 eth0.1 addr 00:00:00:00:00:11 type macvlan root@ubuntu:~# ip link add link eth0 eth0.2 addr 00:00:00:00:00:22 type macvlan root@ubuntu:~# ip link add link eth0 eth0.3 addr 00:00:00:00:00:33 type macvlan root@ubuntu:~# ip -4 link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff 18: eth0.1@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:11 brd ff:ff:ff:ff:ff:ff 19: eth0.2@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:22 brd ff:ff:ff:ff:ff:ff 20: eth0.3@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:33 brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip -4 addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever root@ubuntu:~# ip -4 route sh root@ubuntu:~# dhclient -v eth0.1 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.1/00:00:00:00:00:11 Sending on LPF/eth0.1/00:00:00:00:00:11 Sending on Socket/fallback DHCPDISCOVER on eth0.1 to 255.255.255.255 port 67 interval 3 (xid=0x568eac05) DHCPREQUEST of 192.168.1.145 on eth0.1 to 255.255.255.255 port 67 (xid=0x568eac05) DHCPOFFER of 192.168.1.145 from 192.168.1.254 DHCPACK of 192.168.1.145 from 192.168.1.254 bound to 192.168.1.145 -- renewal in 1473 seconds. root@ubuntu:~# dhclient -v eth0.2 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.2/00:00:00:00:00:22 Sending on LPF/eth0.2/00:00:00:00:00:22 Sending on Socket/fallback DHCPDISCOVER on eth0.2 to 255.255.255.255 port 67 interval 3 (xid=0x21e3114e) DHCPREQUEST of 192.168.1.146 on eth0.2 to 255.255.255.255 port 67 (xid=0x21e3114e) DHCPOFFER of 192.168.1.146 from 192.168.1.254 DHCPACK of 192.168.1.146 from 192.168.1.254 bound to 192.168.1.146 -- renewal in 1366 seconds. root@ubuntu:~# dhclient -v eth0.3 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.3/00:00:00:00:00:33 Sending on LPF/eth0.3/00:00:00:00:00:33 Sending on Socket/fallback DHCPDISCOVER on eth0.3 to 255.255.255.255 port 67 interval 3 (xid=0x11dc5f03) DHCPREQUEST of 192.168.1.147 on eth0.3 to 255.255.255.255 port 67 (xid=0x11dc5f03) DHCPOFFER of 192.168.1.147 from 192.168.1.254 DHCPACK of 192.168.1.147 from 192.168.1.254 bound to 192.168.1.147 -- renewal in 1657 seconds. root@ubuntu:~# ip -4 link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff 18: eth0.1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:11 brd ff:ff:ff:ff:ff:ff 19: eth0.2@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:22 brd ff:ff:ff:ff:ff:ff 20: eth0.3@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:33 brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip -4 addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever 18: eth0.1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.145/24 brd 192.168.1.255 scope global eth0.1 valid_lft forever preferred_lft forever 19: eth0.2@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.146/24 brd 192.168.1.255 scope global eth0.2 valid_lft forever preferred_lft forever 20: eth0.3@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.147/24 brd 192.168.1.255 scope global eth0.3 valid_lft forever preferred_lft forever root@ubuntu:~# ip -4 route sh default via 192.168.1.254 dev eth0.1 192.168.1.0/24 dev eth0.1 proto kernel scope link src 192.168.1.145 192.168.1.0/24 dev eth0.2 proto kernel scope link src 192.168.1.146 192.168.1.0/24 dev eth0.3 proto kernel scope link src 192.168.1.147 root@ubuntu:~# arping -c 5 -I eth0.1 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.145 eth0.1 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 6.936ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.986ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 0.654ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 5.137ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.426ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# arping -c 5 -I eth0.2 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.146 eth0.2 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 5.665ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 3.753ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 16.500ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 3.287ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 32.438ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# arping -c 5 -I eth0.3 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.147 eth0.3 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 4.422ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.429ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.321ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 40.423ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.268ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# tcpdump -n -i eth0.1 -v & [1] 5317 root@ubuntu:~# ping -c5 -q -I eth0.1 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.145 eth0.1: 56(84) bytes of data. tcpdump: listening on eth0.1, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:37.612558 IP (tos 0x0, ttl 64, id 2595, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 2, length 64 13:18:37.618864 IP (tos 0x68, ttl 64, id 14493, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 2, length 64 13:18:37.743650 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:38.134997 IP (tos 0x0, ttl 128, id 23547, offset 0, flags [none], proto UDP (17), length 229) 192.168.1.86.138 > 192.168.1.255.138: NBT UDP PACKET(138) 13:18:38.614580 IP (tos 0x0, ttl 64, id 2596, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 3, length 64 13:18:38.793479 IP (tos 0x68, ttl 64, id 14495, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 3, length 64 13:18:39.151282 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:39.615612 IP (tos 0x0, ttl 64, id 2597, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 4, length 64 13:18:39.746981 IP (tos 0x68, ttl 64, id 14496, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 4, length 64 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4008ms rtt min/avg/max/mdev = 2.793/67.810/178.934/73.108 ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 9 packets captured 12 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.1 -v root@ubuntu:~# tcpdump -n -i eth0.2 -v & [1] 5320 root@ubuntu:~# ping -c5 -q -I eth0.2 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.146 eth0.2: 56(84) bytes of data. tcpdump: listening on eth0.2, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:41.536874 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.254 is-at 58:98:35:57:a0:70, length 46 13:18:41.536933 IP (tos 0x0, ttl 64, id 2599, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 1, length 64 13:18:41.539255 IP (tos 0x68, ttl 64, id 14507, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 1, length 64 13:18:42.127715 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:42.511725 IP (tos 0x0, ttl 64, id 2600, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 2, length 64 13:18:42.514385 IP (tos 0x68, ttl 64, id 14527, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 2, length 64 13:18:42.743856 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:43.511727 IP (tos 0x0, ttl 64, id 2601, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 3, length 64 13:18:43.513768 IP (tos 0x68, ttl 64, id 14528, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 3, length 64 13:18:43.637598 IP (tos 0x0, ttl 128, id 23551, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 255.255.255.255.17500: UDP, length 197 13:18:43.641185 IP (tos 0x0, ttl 128, id 23552, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 192.168.1.255.17500: UDP, length 197 13:18:43.641201 IP (tos 0x0, ttl 128, id 23553, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 255.255.255.255.17500: UDP, length 197 13:18:43.743890 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:44.510758 IP (tos 0x0, ttl 64, id 2602, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 4, length 64 13:18:44.512892 IP (tos 0x68, ttl 64, id 14538, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 4, length 64 13:18:45.510794 IP (tos 0x0, ttl 64, id 2603, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 5, length 64 13:18:45.519701 IP (tos 0x68, ttl 64, id 14539, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 5, length 64 13:18:49.287554 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:50.013463 IP (tos 0x0, ttl 255, id 50737, offset 0, flags [DF], proto UDP (17), length 73) 192.168.1.146.5353 > 224.0.0.251.5353: 0 [2q] PTR (QM)? _ipps._tcp.local. PTR (QM)? _ipp._tcp.local. (45) 13:18:50.218874 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:51.129961 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:52.197074 IP6 (hlim 255, next-header UDP (17) payload length: 53) 2001:818:d812:da00:200:ff:fe00:22.5353 > ff02::fb.5353: [udp sum ok] 0 [2q] PTR (QM)? _ipps._tcp.local. PTR (QM)? _ipp._tcp.local. (45) 13:18:54.128240 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 0 received, 100% packet loss, time 4000ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 13:18:54.657731 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:54.743174 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 25 packets captured 26 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.2 -v root@ubuntu:~# tcpdump -n -i eth0.3 icmp & [1] 5324 root@ubuntu:~# ping -c5 -q -I eth0.3 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.147 eth0.3: 56(84) bytes of data. tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0.3, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:56.373434 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 1, length 64 13:18:57.372116 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 2, length 64 13:18:57.381263 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 2, length 64 13:18:58.371141 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 3, length 64 13:18:58.373275 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 3, length 64 13:18:59.371165 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 4, length 64 13:18:59.373259 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 4, length 64 13:19:00.371211 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 5, length 64 13:19:00.373278 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 5, length 64 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 1 received, 80% packet loss, time 4001ms rtt min/avg/max/mdev = 13.666/13.666/13.666/0.000 ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 9 packets captured 10 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.3 icmp root@ubuntu:~# arp -n Address HWtype HWaddress Flags Mask Iface 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.1 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.2 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.3

  Read the article

• VNC over SSH on open Tunnel

  - by Joey Bagodonuts

  Is it possible to bind VNC server to a open SSH tunnel? I have a tablet that has initiated a reverse ssh tunnel to my server. This works fine over port 8080. I need to now bind to this port from my local machine. It looks like Ubuntu has some "remote desktop viewier" that has ssh built in capabilities so I assume the only thing I need to do now is figure out how to bind the tablets VNCserver to the open SSH tunnel. Is this possible? Thanks

  Read the article

• Using WSUS Admin Console from outside domain

  - by Nick

  Environment: I have a workstation on our primary domain. We have a primary WSUS Server that is the upstream server of 8 different testing domains. The Primary WSUS server is not part of any domain. Routing is configured between my workstation and the Primary WSUS server. I can RDP to the Primary WSUS sever without any problem. The router is configured to forward any any between my workstation and the Primary WSUS server. This WSUS server cannot be part of a domain due to external requirements (I can't change them) on the lab I work in. The version of WSUS is WSUS 3.0 SP 2 What I want to do: I need to connect to the WSUS server with the WSUS Admin console from my local workstation. The end goal is to connect via Powershell and manage with that. I also need to take what I do here and port it to the 8 test domains so I can manage those WSUS servers. The routing is all in place so I can talk to the servers, it's just connecting to the WSUS console that is causing problems. The problem: I cannot get my workstation to connect to the WSUS Console. I get one of the following errors depending on the setup. 1st error: Cannot connect to 'WSUS'. You do not have the permissions required to access this WSUS server. To connect to the server you must be a member of the WSUS Administrators or WSUS Reporters security groups I also get the warning 7012 from the event log that says the same thing. 2nd error: Cannot connect to 'WSUS'. The server may be using another port or different Secure Sockets Layer setting. What I have tried: So far I have configured IIS for Anonymous Authentication on both the WSUS Administration and ApiRemoting30 using an account will call WSUS_User. With this in place, I get the 1st error. When I do this though, the local WSUS Console cannot be used either. Reverting back to only Windows Authentication allows the local console to work, but the remote console now give the 2nd error. I have confirmed the port, and that there is no SSL in use (which is a policy that is pushed from above, that I cannot effect). I have placed WSUS_User in the groups mentioned above, but it still does not connect. I made sure WSUS_User has full access on C:\Program Files\Update Services and C:\Program Files\Update Services\WebServices I am not very familiar with the workings of WSUS or IIS, and have gone as far as I can figure out on my own. Googling these errors all take me to the same steps about Anonymous Authentication and configuring permissions on folders. Note: I have cross-posted this to StackOverflow as well.

  Read the article

• Amazon ec2 - WildCard Sub-Domain

  - by Sharanc25

  I'm running an ec2 instance on ubuntu running lamp stack. I configured my httpd.conf file to support wildcard sub-domain but it didn't work. My httpd.conf file NameVirtualHost * <VirtualHost *> DocumentRoot /www/example ServerName example.com ServerAlias *.example.com </VirtualHost> I tried all possible solutions but they didn't work. Finally I used amazon Route-53 to setup a wildcard DNS to redirect all *.example.com to example.com. My question is, Is it okay if I use Route-53 instead of httpd.conf file for wildcard Sub-Domain ? Is there an error in my httpd.conf file ? (Note: I used the same httpd.conf settings with another hosting provider and it worked perfectly there.) Additional Information : VirtualHost configuration: wildcard NameVirtualHosts and _default_ servers: *:80 is a NameVirtualHost default server example.com (/etc/apache2/httpd.conf:1) port 80 namevhost example.com (/etc/apache2/httpd.conf:1) port 80 namevhost ip-xx-xxx-xx-xxx.ec2.internal (/etc/apache2/sites-enabled/000-default:1) Syntax OK

  Read the article

< Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >