Search Results

Search found 11364 results on 455 pages for 'port blocking'.

Page 134/455 | < Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >

  • How to find out on which internet addresses a java program can listen.

    - by tzador
    My program needs to listen incoming socket connections (lets agree on port 8765), but it doesn't know which addresses it can bind on a particular machine. Of, course, it could simply to listen to all of them, but it need to send to the client program over a different(slower) channel the addresses which it should try in order to rich me on port 8765. So the flow is like this: My program lisens on all available interfaces on port 8765 Finds out a list of inet4 adresses by which it can be possibly reached (this step is the actual question) Posts that address on a whiteboard (blogpost or something) Interested clients try out all of them, to see using which one they can reach my program. This is all is to be done in java ofcourse :)

    Read the article

  • How do I make a TCP server work behind a router (NAT) without any redirection configuration needed.

    - by Chetane
    The scenario is the following. I have two machines A and B: A: Client (behind NAT) B: Server (behind NAT) I want B to be able to listen on any given port, so that A can send packets to B through that specific TCP port and receive any response. If both machines are not behind a NAT it is pretty straight foward process. However how do I make it work so that it works even when B is behind a router, without him having to go change the router configuration enable some port forwarding etc... For example, how do p2p program like torrent clients work without the user having anything to configure? Thanks and I hope my question is clear enough.

    Read the article

  • Find mininum unused value in mysql table

    - by splattru
    I have a MySQL table like this: +--------+-------+ + Server + Port + +--------+-------+ + 1 + 27001 + +--------+-------+ + 2 + 27002 + +--------+-------+ + 4 + 27004 + +--------+-------+ How you can see - here was 27003 port - but it was deleted some time ago (just for example). Is there some way to know the minimum value that is not used (higher than 27000 for example) in mysql table? Or there is no way and I need to make an separate table with all ports and column with "used" or "not used" ? Situation explanation: I am creating game hosting website, and I can use auto-increment for ports, but I will have a lot of deleted/unused ports after some time, and I want to use all of them before increasing port range. Thanks for your answers!

    Read the article

  • What host do I have to bind a listening socket to?

    - by herrturtur
    I used python's socket module and tried to open a listening socket using import socket import sys def getServerSocket(host, port): for r in socket.getaddrinfo(host, port, socket.AF_UNSPEC, socket.SOCK_STREAM, 0, socket.AI_PASSIVE): af, socktype, proto, canonname, sa = r try: s = socket.socket(af, socktype, proto) except socket.error, msg: s = None continue try: s.bind(sa) s.listen(1) except socket.error, msg: s.close() s = None continue break if s is None: print 'could not open socket' sys.exit(1) return s Where host was None and port was 15000. The program would then accept connections, but only from connections on the same machine. What do I have to do to accept connections from the internet?

    Read the article

  • PHP memcache - check if any server is available in pool?

    - by Industrial
    Hi everyone, I have the following code: $cluster['local'] = array('host' => '192.168.1.1', 'port' => '11211', 'weight' => 50); $cluster['local2'] = array('host' => '192.168.1.2', 'port' => '11211', 'weight' => 50); $this->memcache = new Memcache; foreach ($this->cluster() as $cluster) { $this->memcache->addServer($cluster['host'], $cluster['port'], $this->persistent, $cluster['weight'], 10, 10, TRUE , 'failure' ); } I would like to make a function that checks if any of my servers in my memcache Pool is available. How could this be done?

    Read the article

  • How do I manipulate a tree of immutable objects?

    - by Frederik
    I'm building an entire application out of immutable objects so that multi-threading and undo become easier to implement. I'm using the Google Collections Library which provides immutable versions of Map, List, and Set. My application model looks like a tree: Scene is a top-level object that contains a reference to a root Node. Each Node can contain child Nodes and Ports. An object graph might look like this: Scene | +-- Node | +-- Node | +- Port +-- Node | +- Port +- Port If all of these objects are immutable, controlled by a top-level SceneController object: What is the best way to construct this hierarchy? How would I replace an object that is arbitrarily deep in the object tree? Is there a way to support back-links, e.g. a Node having a "parent" attribute?

    Read the article

  • On Linux do people chroot a Java Web Application or use IPTables and run as non-root?

    - by Adam Gent
    When you run a Java Servlet Container that you would like to serve both static and dynamic content on port 80 you have the classic question of whether to run the server as: As root in hopefully a chroot jail if you can (haven't gotten this working yet) As a non root user and then use IPTables to forward port 80 to some other port (1024) that the container is running on Both: As a non root user, IPTables, and chroot jail. The problem with opt. 1 is the complexity of chrooting and still the security problems of running root.The problem with opt. 2 is that each Linux distro has a different way of persisting IPTables. Option 3 of course is probably idea but very hard to setup. Finally every distro has the annoying differences in daemon scripts. What do people find as the best distro agnostic solution and are there resources to show how to do this?

    Read the article

  • PHP callback function not being called

    - by Industrial
    Hi everyone, I've got the following code: function _callback_memcache_failure($host, $port) { print "memcache '$host:$port' failed"; } $this->memcache = new Memcache; $this->memcache->addServer('192.168.1.35', '11211', 0, 50, 10, TRUE, _callback_memcache_failure('192.168.1.35','11211')); The server is online and running (verified!), but the Failure callback function is being called at each connection. Why is that? Reference: PHP documentation: Memcache::addServer - failure_callback Allows the user to specify a callback function to run upon encountering an error. The callback is run before failover is attempted. The function takes two parameters, the hostname and port of the failed server .

    Read the article

  • MPI_Bsend and MPI_Isend. How do they work ?

    - by GBBL
    Hi, using buffered send and non blocking send I was wondering how and if they implement a new level of parallelism in my application eventually generating a thread. Imagine that a slave process generates a large amount of data and want to send it to the master. My idea was to start a buffered or non blocking send then immediately begin to compute the next result. Just when I would have to send the new data I wold check if I can reuse the buffer. This would introduce a new level of parallelism in my application between CPU and communication. Does anybody knows how this is done in MPI ? Does MPI generate a new thread to handle the Bsend or Isend ? Thanks.

    Read the article

  • SVN Can't connect to host

    - by dan.codes
    We have a SVN repository setup on a remote host server. We have a brand new Dev server which eventually I will be setting up our repository on there, but for now I am trying to export a project onto the dev server from SVN. When I try to do it, I get svn: Can't connect to host 'website.com': Connection timed out. I can connect fine from any other server so I am assuming it must be something on the dev server, I am just not sure what setting might be blocking this. I can ping the server and that comes back with results, I thought maybe since it was a local network server, there might of been something blocking access to the external web. I'm just looking for a few ideas as to what it might be.

    Read the article

  • Ruby: Parse Excel 95-2003 files?

    - by Larry K
    Is there a way to read Excel 97-2003 files from Ruby? Background I'm currently using the Ruby Gem parseexcel -- http://raa.ruby-lang.org/project/parseexcel/ But it is an old port of the perl module. It works fine, but the latest format it parses is Excel 95. And guess what? Excel 2007 will not produce the Excel 95 format. John McNamara has taken over duties as the maintainer for the Perl Excel parser, see http://search.cpan.org/~jmcnamara/Spreadsheet-ParseExcel-0.55/lib/Spreadsheet/ParseExcel.pm The current version will parse Excel 95-2003 files. But is there a port to Ruby? My other thought is to build some Ruby to Perl glue code to enable use of the Perl library itself from Ruby. Eg, see http://stackoverflow.com/questions/451636/whats-the-best-way-to-export-utf8-data-into-excel/620612#620612 (I think it would be much faster to write the glue code than to port the parser.) Thanks, Larry

    Read the article

  • fwrite() not writing. Error with my code, or the remote client?

    - by Rob
    Trying to set up a script to send commands to a remote client on a Win32 system. Here is the code: $command = $_POST['command']; $host = $_POST['host']; $port = $_POST['port']; $fp = @fsockopen($host, $port, $e, $s, 15); if (!$fp) { echo 'Error! Here\'s your problem: ' . $e . ': ' . $s; }else{ $fw = fwrite($fp, $command); if (!$fw){ echo 'Failed sending command.'; fclose($fp); }else{ fclose($fp); echo 'Successfully sent: ' . $command; } } My buddy is working on the remote client, and he says that this script is sending '' However, my script is echoing Successfully sent: test Am I doing something wrong, or is it a problem on his end?

    Read the article

  • Find hosted directories Jetty/Apache

    - by Paul Creasey
    Hi, Let say I have a directory which is being hosted by Jetty or Apache (i'd like an answer for both), i know the URL including the port and i can log into the server. How can i find the directory that is being hosted by a certain port? I'd also like to go the other way, i have a folder on the server, which i know if being hosted, but i don't know the port so i can't find it in a web browser. How can i find a list of directories that are being hosted? This has been bugging me for ages but i've never bothered to ask before! Thanks.

    Read the article

  • Call java program on server through web request

    - by Rossella
    I need to develop an application where a Java client calls a Java application located on the server with certain parameters, the Java application on the server computes data and sends the data back to the client. Everything needs to go through port 80 on which I have a IIS webserver listening. I cannot open any other port on the server. Is there any way I can do this? The server can write files in a directory that the client can read but I am not sure how to handle the synchronization and I don't know how to call a script on the server from the client through port 80. Every suggestion would be highly appreciated Thanks a lot in advance, this problem is making me crazy

    Read the article

  • How to turn one server into many servers? (Virtualization/VMWare)

    - by user1229962
    I'm hoping for a high level discussion of this problem I know is quickly approaching my application. I have a server that binds on a specific port and manages TCP Sockets from my clients. I know that it is common practice to use VMWare to virtualize servers and run multiple servers at once. How can a single server design be changed to support multiple servers? Multiple servers can't bind to the same port. If I had to guess I would say a proxy server binds to the port and then sends connections off to the other servers to be handled as if it was still a single server application. I'm wondering what options there are and what are the common practices for solving this problem? Thanks in advance!

    Read the article

  • IIS 7.5 , Tomcat 7 - Isapi redirector - Fail Over - sticky sessions

    - by Jose Matias
    I have two instances of Tomcat 7.0.8 running in the same machine (Tomcat7A and Tomcat7B) and IIS 7.5 acting as front-end load-balancer with isapi-redirector 1.2.31, running on Windows 2008 R2. When i disconnect the instance wich is handling a request i can see a new instance being assigned with the same sessionid but then the user is redirected to the login page. server.xml configuration file <Engine name="Catalina" defaultHost="localhost" jvmRoute="Tomcat7A"> <Realm className="org.apache.catalina.realm.LockOutRealm"> <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/> </Realm> <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true"> <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster" channelSendOptions="8"> <Manager className="org.apache.catalina.ha.session.DeltaManager" expireSessionsOnShutdown="false" notifyListenersOnReplication="true"/> <Channel className="org.apache.catalina.tribes.group.GroupChannel"> <Membership className="org.apache.catalina.tribes.membership.McastService" address="228.0.0.8" bind="7.3.1.22" port="45564" frequency="500" dropTime="3000"/> <Receiver className="org.apache.catalina.tribes.transport.nio.NioReceiver" address="auto" port="4200" autoBind="100" selectorTimeout="5000" maxThreads="6"/> <Sender className="org.apache.catalina.tribes.transport.ReplicationTransmitter"> <Transport className="org.apache.catalina.tribes.transport.nio.PooledParallelSender"/> </Sender> <Interceptor className="org.apache.catalina.tribes.group.interceptors.TcpFailureDetector"/> <Interceptor className="org.apache.catalina.tribes.group.interceptors.MessageDispatch15Interceptor"/> </Channel> <Valve className="org.apache.catalina.ha.tcp.ReplicationValve" filter=".*\.gif;.*\.js;.*\.jpg;.*\.htm;.*\.html;.*\.txt"/> <Valve className="org.apache.catalina.ha.session.JvmRouteBinderValve"/> <ClusterListener className="org.apache.catalina.ha.session.JvmRouteSessionIDBinderListener"/> <ClusterListener className="org.apache.catalina.ha.session.ClusterSessionListener"/> </Cluster> <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs" prefix="localhost_access_log." suffix=".txt" pattern="%h %l %u %t &quot;%r&quot; %s %b" resolveHosts="false"/> </Host> </Engine> worker_mount_file=C:\tomcat\iis\conf\uriworkermap_prod.properties worker.list = balancer,status worker.Tomcat7B.host = 7.3.1.22 worker.Tomcat7B.type = ajp13 worker.Tomcat7B.port = 8010 worker.Tomcat7B.lbfactor = 10 worker.Tomcat7A.host = 7.3.1.22 worker.Tomcat7A.type = ajp13 worker.Tomcat7A.port = 8009 worker.Tomcat7A.lbfactor = 10 worker.balancer.type = lb worker.balancer.sticky_session = 1 worker.balancer.balance_workers = Tomcat7B, Tomcat7A worker.status.type = status isapi_redirect log [debug] wc_get_worker_for_name::jk_worker.c (116): found a worker balancer [debug] HttpExtensionProc::jk_isapi_plugin.c (2188): got a worker for name balancer [debug] service::jk_lb_worker.c (1118): service sticky_session=1 id='89569C584CC4F58740D649C4BE655D36.Tomcat7B' [debug] get_most_suitable_worker::jk_lb_worker.c (946): searching worker for partial sessionid 89569C584CC4F58740D649C4BE655D36.Tomcat7B [debug] get_most_suitable_worker::jk_lb_worker.c (954): searching worker for session route Tomcat7B [debug] get_most_suitable_worker::jk_lb_worker.c (968): found worker Tomcat7B (Tomcat7B) for route Tomcat7B and partial sessionid 89569C584CC4F58740D649C4BE655D36.Tomcat7B [debug] service::jk_lb_worker.c (1161): service worker=Tomcat7B route=Tomcat7B [debug] ajp_get_endpoint::jk_ajp_common.c (3096): acquired connection pool slot=0 after 0 retries [debug] ajp_marshal_into_msgb::jk_ajp_common.c (605): ajp marshaling done [debug] ajp_service::jk_ajp_common.c (2379): processing Tomcat7B with 2 retries [debug] jk_shutdown_socket::jk_connect.c (726): About to shutdown socket 820 [7.3.1.22:24482 -> 7.3.1.22:8010] [debug] jk_shutdown_socket::jk_connect.c (797): shutting down the read side of socket 820 [7.3.1.22:24482 -> 7.3.1.22:8010] [debug] jk_shutdown_socket::jk_connect.c (808): Shutdown socket 820 [7.3.1.22:24482 -> 7.3.1.22:8010] and read 0 lingering bytes in 0 sec. [debug] ajp_send_request::jk_ajp_common.c (1496): (Tomcat7B) failed sending request, socket 820 is not connected any more (errno=-10000) [debug] ajp_next_connection::jk_ajp_common.c (823): (Tomcat7B) Will try pooled connection socket 896 from slot 1 [debug] jk_shutdown_socket::jk_connect.c (726): About to shutdown socket 896 [7.3.1.22:24488 -> 7.3.1.22:8010] [debug] jk_shutdown_socket::jk_connect.c (797): shutting down the read side of socket 896 [7.3.1.22:24488 -> 7.3.1.22:8010] [debug] jk_shutdown_socket::jk_connect.c (808): Shutdown socket 896 [7.3.1.22:24488 -> 7.3.1.22:8010] and read 0 lingering bytes in 0 sec. [debug] ajp_send_request::jk_ajp_common.c (1496): (Tomcat7B) failed sending request, socket 896 is not connected any more (errno=-10000) [info] ajp_send_request::jk_ajp_common.c (1567): (Tomcat7B) all endpoints are disconnected, detected by connect check (2), cping (0), send (0) [debug] jk_open_socket::jk_connect.c (484): socket TCP_NODELAY set to On [debug] jk_open_socket::jk_connect.c (608): trying to connect socket 896 to 7.3.1.22:8010 [info] jk_open_socket::jk_connect.c (626): connect to 7.3.1.22:8010 failed (errno=61) [info] ajp_connect_to_endpoint::jk_ajp_common.c (959): Failed opening socket to (7.3.1.22:8010) (errno=61) [error] ajp_send_request::jk_ajp_common.c (1578): (Tomcat7B) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=61) [info] ajp_service::jk_ajp_common.c (2543): (Tomcat7B) sending request to tomcat failed (recoverable), because of error during request sending (attempt=1) [debug] ajp_service::jk_ajp_common.c (2400): retry 1, sleeping for 100 ms before retrying [debug] ajp_send_request::jk_ajp_common.c (1572): (Tomcat7B) all endpoints are disconnected. [debug] jk_open_socket::jk_connect.c (484): socket TCP_NODELAY set to On [debug] jk_open_socket::jk_connect.c (608): trying to connect socket 896 to 7.3.1.22:8010 [info] jk_open_socket::jk_connect.c (626): connect to 7.3.1.22:8010 failed (errno=61) [info] ajp_connect_to_endpoint::jk_ajp_common.c (959): Failed opening socket to (7.3.1.22:8010) (errno=61) [error] ajp_send_request::jk_ajp_common.c (1578): (Tomcat7B) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=61) [info] ajp_service::jk_ajp_common.c (2543): (Tomcat7B) sending request to tomcat failed (recoverable), because of error during request sending (attempt=2) [error] ajp_service::jk_ajp_common.c (2562): (Tomcat7B) connecting to tomcat failed. [debug] ajp_reset_endpoint::jk_ajp_common.c (757): (Tomcat7B) resetting endpoint with socket -1 (socket shutdown) [debug] ajp_done::jk_ajp_common.c (3013): recycling connection pool slot=0 for worker Tomcat7B [debug] service::jk_lb_worker.c (1374): worker Tomcat7B escalating local error to global error [info] service::jk_lb_worker.c (1388): service failed, worker Tomcat7B is in error state [debug] service::jk_lb_worker.c (1399): recoverable error... will try to recover on other worker [debug] get_most_suitable_worker::jk_lb_worker.c (946): searching worker for partial sessionid 89569C584CC4F58740D649C4BE655D36.Tomcat7B [debug] get_most_suitable_worker::jk_lb_worker.c (954): searching worker for session route Tomcat7B [debug] get_most_suitable_worker::jk_lb_worker.c (1001): found best worker Tomcat7A (Tomcat7A) using method 'Request' [debug] service::jk_lb_worker.c (1161): service worker=Tomcat7A route=Tomcat7B [debug] ajp_get_endpoint::jk_ajp_common.c (3096): acquired connection pool slot=0 after 0 retries [debug] ajp_marshal_into_msgb::jk_ajp_common.c (605): ajp marshaling done [debug] ajp_service::jk_ajp_common.c (2379): processing Tomcat7A with 2 retries [debug] ajp_send_request::jk_ajp_common.c (1572): (Tomcat7A) all endpoints are disconnected. [debug] jk_open_socket::jk_connect.c (484): socket TCP_NODELAY set to On [debug] jk_open_socket::jk_connect.c (608): trying to connect socket 896 to 7.3.1.22:8009 [debug] jk_open_socket::jk_connect.c (634): socket 896 [7.3.1.22:24496 -> 7.3.1.22:8009] connected [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): sending to ajp13 pos=4 len=615 max=8192 [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0000 .4.c....HTTP/1.1 [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0010 .../Accounter/pr [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0020 intFrameSet.jhtm [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0030 l...::1...::1... [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0040 localhost..P.... [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0050 ...Keep-Alive... [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0060 ..0....rimage/jp [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0070 eg,.image/gif,.i [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0080 mage/pjpeg,.appl [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0090 ication/x-ms-app [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 00a0 lication,.applic [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 00b0 ation/xaml+xml,. [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 00c0 application/x-ms [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 00d0 -xbap,.*/*...Acc [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 00e0 ept-Encoding...g [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 00f0 zip,.deflate...A [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0100 ccept-Language.. [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0110 .nb-NO....]Usern [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0120 ame=NA_jose.mati [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0130 as_AT_addenergy. [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0140 no;.JSESSIONID=8 [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0150 9569C584CC4F5874 [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0160 0D649C4BE655D36. [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0170 Tomcat7B.....loc [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0180 alhost.....http: [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0190 //localhost/Acco [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 01a0 unter/NemsAccoun [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 01b0 ter.jhtml....uMo [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 01c0 zilla/4.0.(compa [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 01d0 tible;.MSIE.8.0; [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 01e0 .Windows.NT.6.1; [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 01f0 .WOW64;.Trident/ [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0200 4.0;.SLCC2;..NET [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0210 .CLR.2.0.50727;. [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0220 .NET4.0C;..NET4. [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0230 0E)............F [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0240 rameName=Reports [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0250 _CS_EUETS....Tom [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0260 cat7B........... [debug] ajp_send_request::jk_ajp_common.c (1632): (Tomcat7A) request body to send 0 - request body to resend 0 [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): received from ajp13 pos=0 len=238 max=8192 [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0000 .....Moved.Tempo [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0010 rarily......OJSE [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0020 SSIONID=6A2507A4 [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0030 626F698EC74A733C [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0040 DBA7D9FE.Tomcat7 [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0050 A;.Path=/Account [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0060 er;.HttpOnly...P [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0070 ragma...no-cache [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0080 ...Cache-Control [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0090 ...no-cache....& [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 00a0 http://localhost [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 00b0 /Accounter/login [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 00c0 .jhtml.....text/ [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 00d0 html;charset=ISO [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 00e0 -8859-1.....0... [debug] ajp_unmarshal_response::jk_ajp_common.c (660): status = 302 [debug] ajp_unmarshal_response::jk_ajp_common.c (667): Number of headers is = 6 [debug] ajp_unmarshal_response::jk_ajp_common.c (723): Header[0] [Set-Cookie] = [JSESSIONID=6A2507A4626F698EC74A733CDBA7D9FE.Tomcat7A; Path=/Accounter; HttpOnly] [debug] ajp_unmarshal_response::jk_ajp_common.c (723): Header[1] [Pragma] = [no-cache] [debug] ajp_unmarshal_response::jk_ajp_common.c (723): Header[2] [Cache-Control] = [no-cache] [debug] ajp_unmarshal_response::jk_ajp_common.c (723): Header[3] [Location] = [http://localhost/Accounter/login.jhtml] [debug] ajp_unmarshal_response::jk_ajp_common.c (723): Header[4] [Content-Type] = [text/html;charset=ISO-8859-1] [debug] ajp_unmarshal_response::jk_ajp_common.c (723): Header[5] [Content-Length] = [0] [debug] start_response::jk_isapi_plugin.c (963): Starting response for URI '/Accounter/printFrameSet.jhtml' (protocol HTTP/1.1) [debug] start_response::jk_isapi_plugin.c (1063): Not using Keep-Alive [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): received from ajp13 pos=0 len=2 max=8192 [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0000 ................ [debug] ajp_process_callback::jk_ajp_common.c (1943): AJP13 protocol: Reuse is OK [debug] ajp_reset_endpoint::jk_ajp_common.c (757): (Tomcat7A) resetting endpoint with socket 896 [debug] ajp_done::jk_ajp_common.c (3013): recycling connection pool slot=0 for worker Tomcat7A [debug] HttpExtensionProc::jk_isapi_plugin.c (2211): service() returned OK [debug] HttpFilterProc::jk_isapi_plugin.c (1851): Filter started [debug] map_uri_to_worker_ext::jk_uri_worker_map.c (1036): Attempting to map URI '/localhost/Accounter/login.jhtml' from 8 maps [debug] find_match::jk_uri_worker_map.c (850): Attempting to map context URI '/Accounter/servlet/*=balancer' source 'uriworkermap' [debug] find_match::jk_uri_worker_map.c (850): Attempting to map context URI '/Accounter/ws/*=balancer' source 'uriworkermap' [debug] find_match::jk_uri_worker_map.c (850): Attempting to map context URI '/Accounter/nems*.pdf=balancer' source 'uriworkermap' [debug] find_match::jk_uri_worker_map.c (850): Attempting to map context URI '/Accounter/*.service=balancer' source 'uriworkermap' [debug] find_match::jk_uri_worker_map.c (850): Attempting to map context URI '/Accounter/*.jhtml=balancer' source 'uriworkermap' [debug] find_match::jk_uri_worker_map.c (850): Attempting to map context URI '/Accounter/*.json=balancer' source 'uriworkermap' [debug] find_match::jk_uri_worker_map.c (850): Attempting to map context URI '/jkmanager=status' source 'uriworkermap' [debug] find_match::jk_uri_worker_map.c (850): Attempting to map context URI '/Accounter/servlet/*=balancer' source 'uriworkermap' [debug] find_match::jk_uri_worker_map.c (850): Attempting to map context URI '/Accounter/ws/*=balancer' source 'uriworkermap' [debug] find_match::jk_uri_worker_map.c (850): Attempting to map context URI '/Accounter/nems*.pdf=balancer' source 'uriworkermap' [debug] find_match::jk_uri_worker_map.c (850): Attempting to map context URI '/Accounter/*.service=balancer' source 'uriworkermap' [debug] find_match::jk_uri_worker_map.c (850): Attempting to map context URI '/Accounter/*.jhtml=balancer' source 'uriworkermap' [debug] find_match::jk_uri_worker_map.c (863): Found a wildchar match '/Accounter/*.jhtml=balancer' [debug] HttpFilterProc::jk_isapi_plugin.c (1938): check if [/Accounter/login.jhtml] points to the web-inf directory [debug] HttpFilterProc::jk_isapi_plugin.c (1954): [/Accounter/login.jhtml] is a servlet url - should redirect to balancer [debug] HttpFilterProc::jk_isapi_plugin.c (1994): fowarding escaped URI [/Accounter/login.jhtml] [debug] init_ws_service::jk_isapi_plugin.c (2982): Reading extension header HTTP_TOMCATWORKER0000000180000000: balancer [debug] init_ws_service::jk_isapi_plugin.c (2983): Reading extension header HTTP_TOMCATWORKERIDX0000000180000000: 5 [debug] init_ws_service::jk_isapi_plugin.c (2984): Reading extension header HTTP_TOMCATURI0000000180000000: /Accounter/login.jhtml [debug] init_ws_service::jk_isapi_plugin.c (2985): Reading extension header HTTP_TOMCATQUERY0000000180000000: (null) [debug] init_ws_service::jk_isapi_plugin.c (3040): Applying service extensions [debug] init_ws_service::jk_isapi_plugin.c (3298): Service protocol=HTTP/1.1 method=GET host=::1 addr=::1 name=localhost port=80 auth= user= uri=/Accounter/login.jhtml [debug] init_ws_service::jk_isapi_plugin.c (3310): Service request headers=9 attributes=0 chunked=no content-length=0 available=0 [debug] wc_get_worker_for_name::jk_worker.c (116): found a worker balancer [debug] HttpExtensionProc::jk_isapi_plugin.c (2188): got a worker for name balancer [debug] service::jk_lb_worker.c (1118): service sticky_session=1 id='6A2507A4626F698EC74A733CDBA7D9FE.Tomcat7A' [debug] get_most_suitable_worker::jk_lb_worker.c (946): searching worker for partial sessionid 6A2507A4626F698EC74A733CDBA7D9FE.Tomcat7A [debug] get_most_suitable_worker::jk_lb_worker.c (954): searching worker for session route Tomcat7A [debug] get_most_suitable_worker::jk_lb_worker.c (968): found worker Tomcat7A (Tomcat7A) for route Tomcat7A and partial sessionid 6A2507A4626F698EC74A733CDBA7D9FE.Tomcat7A [debug] service::jk_lb_worker.c (1161): service worker=Tomcat7A route=Tomcat7A [debug] ajp_get_endpoint::jk_ajp_common.c (3096): acquired connection pool slot=0 after 0 retries [debug] ajp_marshal_into_msgb::jk_ajp_common.c (605): ajp marshaling done [debug] ajp_service::jk_ajp_common.c (2379): processing Tomcat7A with 2 retries [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): sending to ajp13 pos=4 len=577 max=8192 [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0000 .4.=....HTTP/1.1 [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0010 .../Accounter/lo [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0020 gin.jhtml...::1. [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0030 ..::1...localhos [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0040 t..P.......Keep- [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0050 Alive.....0....r [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0060 image/jpeg,.imag [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0070 e/gif,.image/pjp [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0080 eg,.application/ [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0090 x-ms-application [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 00a0 ,.application/xa [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 00b0 ml+xml,.applicat [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 00c0 ion/x-ms-xbap,.* [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 00d0 /*...Accept-Enco [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 00e0 ding...gzip,.def [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 00f0 late...Accept-La [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0100 nguage...nb-NO.. [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0110 ..]Username=NA_j [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0120 ose.matias_AT_ad [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0130 denergy.no;.JSES [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0140 SIONID=6A2507A46 [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0150 26F698EC74A733CD [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0160 BA7D9FE.Tomcat7A [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0170 .....localhost.. [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0180 ...http://localh [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0190 ost/Accounter/Ne [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 01a0 msAccounter.jhtm [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 01b0 l....uMozilla/4. [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 01c0 0.(compatible;.M [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 01d0 SIE.8.0;.Windows [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 01f0 Trident/4.0;.SLC [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 01e0 .NT.6.1;.WOW64;. [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0200 C2;..NET.CLR.2.0 [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0210 .50727;..NET4.0C [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0220 ;..NET4.0E)..... [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0230 .......Tomcat7A. [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0240 ................ [debug] ajp_send_request::jk_ajp_common.c (1621): (Tomcat7A) Statistics about invalid connections: connect check (0), cping (0), send (0) [debug] ajp_send_request::jk_ajp_common.c (1632): (Tomcat7A) request body to send 0 - request body to resend 0 [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): received from ajp13 pos=0 len=135 max=8192 [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0000 .....OK.....Prag [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0010 ma...no-cache... [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0020 Expires...Thu,.0 [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0030 1.Jan.1970.00:00 [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0040 :00.GMT...Cache- [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0050 Control...no-cac [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0060 he...Cache-Contr [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0070 ol...no-store... [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0080 ..2995..........

    Read the article

  • stunnel crashing

    - by Jay
    I'm trying to use stunnel to secure a legacy application's communications. I can't seem to get it setup and working. Can anyone provide any hints where I'm going wrong? Here's what I'm trying to accomplish: A windows service on a client machine connects to a server on port 7000 using TCP. I'd like to encrypt the communication between client and server. Here's what I've tried: Created a new server that accepts ssl connections on port 7443. Got a certificate for the server and installed it. That seems to work with my test setup. Installed stunnel on my windows machine (version 7.43 from the distribution archive file). Installed libssl32.dll and libeay32.dll in the same directory as stunnel.exe ( from the openssl-0.9.8h-1 binary distribution). Installed it as a service using "stunnel -install" Configured stunnel as follows: debug=7 output=C:\p4\internal\Utility\Proxy\proxy.log service=Proxy taskbar=no [exchange] accept=7000 client=yes connect=proxy.blah.com:7443 I changed my hosts file to trick the old application into connecting through stunnel: server.blah.com 127.0.0.1 # when client looks up server it goes to stunnel proxy.blah.com IP-address-of-server.blah.com # stunnel connects to new server "server.blah.com" now resolves to the machine it's running on (i.e. stunnel). "proxy.blah.com" goes to the real server. stunnel should connect to the server. I start the stunnel service and try to connect. It looks like it's working but the stunnel service just shuts down with no message. 2010.04.19 13:16:21 LOG5[4924:3716]: stunnel 4.33 on x86-pc-mingw32-gnu with OpenSSL 0.9.8h 28 May 2008 2010.04.19 13:16:21 LOG5[4924:3716]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.04.19 13:16:49 LOG5[4924:3748]: Service exchange accepted connection from 127.0.0.1:4134 2010.04.19 13:16:49 LOG6[4924:3748]: connect_blocking: connecting x.80.60.32:7443 2010.04.19 13:16:49 LOG5[4924:3748]: connect_blocking: connected x.80.60.32:7443 2010.04.19 13:16:49 LOG5[4924:3748]: Service exchange connected remote server from x.253.120.19:4135 2010.04.19 13:20:24 LOG5[3668:3856]: Reading configuration from file stunnel.conf 2010.04.19 13:20:24 LOG7[3668:3856]: Snagged 64 random bytes from C:/.rnd 2010.04.19 13:20:24 LOG7[3668:3856]: Wrote 1024 new random bytes to C:/.rnd 2010.04.19 13:20:24 LOG7[3668:3856]: RAND_status claims sufficient entropy for the PRNG 2010.04.19 13:20:24 LOG7[3668:3856]: PRNG seeded successfully 2010.04.19 13:20:24 LOG7[3668:3856]: SSL context initialized for service exchange 2010.04.19 13:20:24 LOG5[3668:3856]: Configuration successful 2010.04.19 13:20:24 LOG5[3668:3856]: No limit detected for the number of clients 2010.04.19 13:20:24 LOG7[3668:3856]: FD=312 in non-blocking mode 2010.04.19 13:20:24 LOG7[3668:3856]: Option SO_REUSEADDR set on accept socket 2010.04.19 13:20:24 LOG7[3668:3856]: Service exchange bound to 0.0.0.0:7000 2010.04.19 13:20:24 LOG7[3668:3856]: Service exchange opened FD=312 2010.04.19 13:20:24 LOG5[3668:3856]: stunnel 4.33 on x86-pc-mingw32-gnu with OpenSSL 0.9.8h 28 May 2008 2010.04.19 13:20:24 LOG5[3668:3856]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.04.19 13:21:02 LOG7[3668:4556]: Service exchange accepted FD=372 from 127.0.0.1:4156 2010.04.19 13:21:02 LOG7[3668:4556]: Creating a new thread 2010.04.19 13:21:02 LOG7[3668:4556]: New thread created 2010.04.19 13:21:02 LOG7[3668:3756]: Service exchange started 2010.04.19 13:21:02 LOG7[3668:3756]: FD=372 in non-blocking mode 2010.04.19 13:21:02 LOG5[3668:3756]: Service exchange accepted connection from 127.0.0.1:4156 2010.04.19 13:21:02 LOG7[3668:3756]: FD=396 in non-blocking mode 2010.04.19 13:21:02 LOG6[3668:3756]: connect_blocking: connecting x.80.60.32:7443 2010.04.19 13:21:02 LOG7[3668:3756]: connect_blocking: s_poll_wait x.80.60.32:7443: waiting 10 seconds 2010.04.19 13:21:02 LOG5[3668:3756]: connect_blocking: connected x.80.60.32:7443 2010.04.19 13:21:02 LOG5[3668:3756]: Service exchange connected remote server from x.253.120.19:4157 2010.04.19 13:21:02 LOG7[3668:3756]: Remote FD=396 initialized 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): before/connect initialization 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write client hello A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read server hello A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read server certificate A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read server done A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write client key exchange A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write change cipher spec A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write finished A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 flush data 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read finished A The client thinks the connection is closed: No connection could be made because the target machine actively refused it 127.0.0.1:7000 at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress) at System.Net.Sockets.Socket.Connect(EndPoint remoteEP) at Service.ConnUtility.Connect() Any suggestions?

    Read the article

  • IP Micro-outages, telephone micro-outages, and CATV micro-outages

    - by Michael Graff
    This is a long and complicated question, mostly because it has been going on for 2.5 years without a solution in sight. It also is only one-third computer related, the other two-thirds are cable TV and cable-phone related. Background I have COX Communications for a cable provider, and we get Internet, digital cable TV, and digital phone service through them. The Internet is a SB5101 right now, and has been a DPC2100 and SB5120 in the past. Same results. The phone service is provided through a telephone interface mounted on the outside of the house (not classic VoIP) and the CATV is through a Scientific Atlanta receiver without DVR. I do have a TiVo connected to the CATV box. Symptoms The CATV shows "blocking" -- sometimes very very short duration where a few blocks appear on the screen. Sometimes it lasts long enough that the video "pauses" for 2-5 seconds, and rarely but not unseen the audio also fails. The CATV decoder box shows no correctable (FEC) or uncorrectable errors. That is, all BER counters are zero for the video stream. The Internet shows "micro-outages" where it appears that sent packets are not making it out, but I continue to receive packets from local modems. That is, pings stop coming back, but I continue to see modems broadcast for DHCP, and sometimes they ask more than once. The cable modem shows no errors during this time, but cable modems lie like you would not believe. It is actually possible to unplug the coax from the modem for 20 seconds and it reports NO ERRORS to the provider's tools. The phone service cuts out for 1-3 seconds, infrequently. When this happens, I hear NOTHING (not even comfort noise) and the remote side hears a "click" as if I were getting a call waiting message. However, there is no call incoming, other than the one I'm currently on of course. Things SEEM to happen more frequently when the temperature outside swings from cold to warm, so fall/spring seems worse than summer/winter. All micro-outages occur between once or twice a day (which I could ignore) to 10 times per hour. All SNR, signal levels, noise levels, etc. show very close to optimal when measured. COX's diagnosis This is a continual pain for me. Over the last 2.5 years, they have opened, "fixed" something, and closed the tickets. They close it without confirming that it is indeed better, and when I reopen they cannot do that, but instead they open a new ticket and send yet another low-level tech out to do the same signal tests and report that all is OK. I've finally gotten a line tech who has a clue and is motivated enough to pursue this with me. We have tried things like switching the local nodes over to UPS and generator power, but this does not trigger the noise. We have tried replacing all cabling, the tap outside my house, the modem, the CATV decoder -- all without resolution. Recently they have decided it is both my computer or switch, my TiVo, and my phone that are all broken and causing this issue. My debugging steps I spent the worse day of my TV-watching life yesterday and part of today. I watched live TV without the TiVo. I witnessed blocking, but it did "feel different." and was actually more severe. Some days it is better, some days it is worse, so perhaps this was just a very bad day. Today, I connected the TiVo to my DVD player, and ran two very long movies through it. I saw no blocking at all during nearly 6 hours of video. Suggestions? Does anyone have any suggestions on what to do next? I understand perhaps only the IP side can be addressed here, but it is one of the more limiting debugging options.

    Read the article

  • stunnel crashing

    - by Jay
    I'm trying to use stunnel to secure a legacy application's communications. I can't seem to get it setup and working. Can anyone provide any hints where I'm going wrong? Here's what I'm trying to accomplish: A windows service on a client machine connects to a server on port 7000 using TCP. I'd like to encrypt the communication between client and server. Here's what I've tried: Created a new server that accepts ssl connections on port 7443. Got a certificate for the server and installed it. That seems to work with my test setup. Installed stunnel on my windows machine (version 7.43 from the distribution archive file). Installed libssl32.dll and libeay32.dll in the same directory as stunnel.exe ( from the openssl-0.9.8h-1 binary distribution). Installed it as a service using "stunnel -install" Configured stunnel as follows: debug=7 output=C:\p4\internal\Utility\Proxy\proxy.log service=Proxy taskbar=no [exchange] accept=7000 client=yes connect=proxy.blah.com:7443 I changed my hosts file to trick the old application into connecting through stunnel: server.blah.com 127.0.0.1 # when client looks up server it goes to stunnel proxy.blah.com IP-address-of-server.blah.com # stunnel connects to new server "server.blah.com" now resolves to the machine it's running on (i.e. stunnel). "proxy.blah.com" goes to the real server. stunnel should connect to the server. I start the stunnel service and try to connect. It looks like it's working but the stunnel service just shuts down with no message. 2010.04.19 13:16:21 LOG5[4924:3716]: stunnel 4.33 on x86-pc-mingw32-gnu with OpenSSL 0.9.8h 28 May 2008 2010.04.19 13:16:21 LOG5[4924:3716]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.04.19 13:16:49 LOG5[4924:3748]: Service exchange accepted connection from 127.0.0.1:4134 2010.04.19 13:16:49 LOG6[4924:3748]: connect_blocking: connecting x.80.60.32:7443 2010.04.19 13:16:49 LOG5[4924:3748]: connect_blocking: connected x.80.60.32:7443 2010.04.19 13:16:49 LOG5[4924:3748]: Service exchange connected remote server from x.253.120.19:4135 2010.04.19 13:20:24 LOG5[3668:3856]: Reading configuration from file stunnel.conf 2010.04.19 13:20:24 LOG7[3668:3856]: Snagged 64 random bytes from C:/.rnd 2010.04.19 13:20:24 LOG7[3668:3856]: Wrote 1024 new random bytes to C:/.rnd 2010.04.19 13:20:24 LOG7[3668:3856]: RAND_status claims sufficient entropy for the PRNG 2010.04.19 13:20:24 LOG7[3668:3856]: PRNG seeded successfully 2010.04.19 13:20:24 LOG7[3668:3856]: SSL context initialized for service exchange 2010.04.19 13:20:24 LOG5[3668:3856]: Configuration successful 2010.04.19 13:20:24 LOG5[3668:3856]: No limit detected for the number of clients 2010.04.19 13:20:24 LOG7[3668:3856]: FD=312 in non-blocking mode 2010.04.19 13:20:24 LOG7[3668:3856]: Option SO_REUSEADDR set on accept socket 2010.04.19 13:20:24 LOG7[3668:3856]: Service exchange bound to 0.0.0.0:7000 2010.04.19 13:20:24 LOG7[3668:3856]: Service exchange opened FD=312 2010.04.19 13:20:24 LOG5[3668:3856]: stunnel 4.33 on x86-pc-mingw32-gnu with OpenSSL 0.9.8h 28 May 2008 2010.04.19 13:20:24 LOG5[3668:3856]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.04.19 13:21:02 LOG7[3668:4556]: Service exchange accepted FD=372 from 127.0.0.1:4156 2010.04.19 13:21:02 LOG7[3668:4556]: Creating a new thread 2010.04.19 13:21:02 LOG7[3668:4556]: New thread created 2010.04.19 13:21:02 LOG7[3668:3756]: Service exchange started 2010.04.19 13:21:02 LOG7[3668:3756]: FD=372 in non-blocking mode 2010.04.19 13:21:02 LOG5[3668:3756]: Service exchange accepted connection from 127.0.0.1:4156 2010.04.19 13:21:02 LOG7[3668:3756]: FD=396 in non-blocking mode 2010.04.19 13:21:02 LOG6[3668:3756]: connect_blocking: connecting x.80.60.32:7443 2010.04.19 13:21:02 LOG7[3668:3756]: connect_blocking: s_poll_wait x.80.60.32:7443: waiting 10 seconds 2010.04.19 13:21:02 LOG5[3668:3756]: connect_blocking: connected x.80.60.32:7443 2010.04.19 13:21:02 LOG5[3668:3756]: Service exchange connected remote server from x.253.120.19:4157 2010.04.19 13:21:02 LOG7[3668:3756]: Remote FD=396 initialized 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): before/connect initialization 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write client hello A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read server hello A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read server certificate A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read server done A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write client key exchange A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write change cipher spec A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 write finished A 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 flush data 2010.04.19 13:21:02 LOG7[3668:3756]: SSL state (connect): SSLv3 read finished A The client thinks the connection is closed: No connection could be made because the target machine actively refused it 127.0.0.1:7000 at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress) at System.Net.Sockets.Socket.Connect(EndPoint remoteEP) at Service.ConnUtility.Connect() Any suggestions?

    Read the article

  • Can't open DDMS

    - by Emerald214
    When I open a standalone DDMS besides Eclipse, it generates the below error. hieund@hieund:~$ ddms 01:51:58 E/ddms: Could not open Selected VM debug port (8700). Make sure you do not have another instance of DDMS or of the eclipse plugin running. If it's being used by something else, choose a new port number in the preferences. (DDMS:6904): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -5 and height 17 (DDMS:6904): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -5 and height 17 01:52:18 E/DDMS: device offline com.android.ddmlib.AdbCommandRejectedException: device offline at com.android.ddmlib.AdbHelper.setDevice(AdbHelper.java:736) at com.android.ddmlib.AdbHelper.executeRemoteCommand(AdbHelper.java:373) at com.android.ddmlib.Device.executeShellCommand(Device.java:364) at com.android.ddmuilib.SysinfoPanel.loadFromDevice(SysinfoPanel.java:159) at com.android.ddmuilib.SysinfoPanel.deviceSelected(SysinfoPanel.java:126) at com.android.ddmuilib.SelectionDependentPanel.deviceSelected(SelectionDependentPanel.java:52) at com.android.ddms.UIThread.selectionChanged(UIThread.java:1721) at com.android.ddmuilib.DevicePanel.notifyListeners(DevicePanel.java:752) at com.android.ddmuilib.DevicePanel.notifyListeners(DevicePanel.java:740) at com.android.ddmuilib.DevicePanel.access$1100(DevicePanel.java:56) at com.android.ddmuilib.DevicePanel$1.widgetSelected(DevicePanel.java:357) at org.eclipse.swt.widgets.TypedListener.handleEvent(Unknown Source) at org.eclipse.swt.widgets.EventTable.sendEvent(Unknown Source) at org.eclipse.swt.widgets.Widget.sendEvent(Unknown Source) at org.eclipse.swt.widgets.Display.runDeferredEvents(Unknown Source) at org.eclipse.swt.widgets.Display.readAndDispatch(Unknown Source) at com.android.ddms.UIThread.runUI(UIThread.java:517) at com.android.ddms.Main.main(Main.java:116) 01:52:32 E/ddms: shutting down due to uncaught exception 01:52:32 E/ddms: Failed to execute runnable (java.lang.ArrayIndexOutOfBoundsException: -1) org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.ArrayIndexOutOfBoundsException: -1) at org.eclipse.swt.SWT.error(Unknown Source) at org.eclipse.swt.SWT.error(Unknown Source) at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Unknown Source) at org.eclipse.swt.widgets.Display.runAsyncMessages(Unknown Source) at org.eclipse.swt.widgets.Display.readAndDispatch(Unknown Source) at com.android.ddms.UIThread.runUI(UIThread.java:517) at com.android.ddms.Main.main(Main.java:116) Caused by: java.lang.ArrayIndexOutOfBoundsException: -1 at org.eclipse.jface.viewers.AbstractTableViewer$VirtualManager.resolveElement(AbstractTableViewer.java:100) at org.eclipse.jface.viewers.AbstractTableViewer$1.handleEvent(AbstractTableViewer.java:70) at org.eclipse.swt.widgets.EventTable.sendEvent(Unknown Source) at org.eclipse.swt.widgets.Widget.sendEvent(Unknown Source) at org.eclipse.swt.widgets.Widget.sendEvent(Unknown Source) at org.eclipse.swt.widgets.Widget.sendEvent(Unknown Source) at org.eclipse.swt.widgets.Table.checkData(Unknown Source) at org.eclipse.swt.widgets.Table.cellDataProc(Unknown Source) at org.eclipse.swt.widgets.Display.cellDataProc(Unknown Source) at org.eclipse.swt.internal.gtk.OS._gtk_list_store_append(Native Method) at org.eclipse.swt.internal.gtk.OS.gtk_list_store_append(Unknown Source) at org.eclipse.swt.widgets.Table.setItemCount(Unknown Source) at org.eclipse.jface.viewers.TableViewer.doSetItemCount(TableViewer.java:217) at org.eclipse.jface.viewers.AbstractTableViewer.internalVirtualRefreshAll(AbstractTableViewer.java:661) at org.eclipse.jface.viewers.AbstractTableViewer.internalRefresh(AbstractTableViewer.java:635) at org.eclipse.jface.viewers.AbstractTableViewer.internalRefresh(AbstractTableViewer.java:620) at org.eclipse.jface.viewers.StructuredViewer$7.run(StructuredViewer.java:1430) at org.eclipse.jface.viewers.StructuredViewer.preservingSelection(StructuredViewer.java:1365) at org.eclipse.jface.viewers.StructuredViewer.preservingSelection(StructuredViewer.java:1328) at org.eclipse.jface.viewers.StructuredViewer.refresh(StructuredViewer.java:1428) at org.eclipse.jface.viewers.ColumnViewer.refresh(ColumnViewer.java:537) at org.eclipse.jface.viewers.StructuredViewer.refresh(StructuredViewer.java:1387) at com.android.ddmuilib.logcat.LogCatPanel$LogCatTableRefresherTask.run(LogCatPanel.java:1000) at org.eclipse.swt.widgets.RunnableLock.run(Unknown Source) ... 5 more I tried to change port for DDMS in Eclipse but it still doesn't work.

    Read the article

  • Making Sense of ASP.NET Paths

    - by Rick Strahl
    ASP.Net includes quite a plethora of properties to retrieve path information about the current request, control and application. There's a ton of information available about paths on the Request object, some of it appearing to overlap and some of it buried several levels down, and it can be confusing to find just the right path that you are looking for. To keep things straight I thought it a good idea to summarize the path options along with descriptions and example paths. I wrote a post about this a long time ago in 2004 and I find myself frequently going back to that page to quickly figure out which path I’m looking for in processing the current URL. Apparently a lot of people must be doing the same, because the original post is the second most visited even to this date on this blog to the tune of nearly 500 hits per day. So, I decided to update and expand a bit on the original post with a little more information and clarification based on the original comments. Request Object Paths Available Here's a list of the Path related properties on the Request object (and the Page object). Assume a path like http://www.west-wind.com/webstore/admin/paths.aspx for the paths below where webstore is the name of the virtual. .blackborder td { border-bottom: solid 1px silver; border-left: solid 1px silver; } Request Property Description and Value ApplicationPath Returns the web root-relative logical path to the virtual root of this app. /webstore/ PhysicalApplicationPath Returns local file system path of the virtual root for this app. c:\inetpub\wwwroot\webstore PhysicalPath Returns the local file system path to the current script or path. c:\inetpub\wwwroot\webstore\admin\paths.aspx Path FilePath CurrentExecutionFilePath All of these return the full root relative logical path to the script page including path and scriptname. CurrentExcecutionFilePath will return the ‘current’ request path after a Transfer/Execute call while FilePath will always return the original request’s path. /webstore/admin/paths.aspx AppRelativeCurrentExecutionFilePath Returns an ASP.NET root relative virtual path to the script or path for the current request. If in  a Transfer/Execute call the transferred Path is returned. ~/admin/paths.aspx PathInfo Returns any extra path following the script name. If no extra path is provided returns the root-relative path (returns text in red below). string.Empty if no PathInfo is available. /webstore/admin/paths.aspx/ExtraPathInfo RawUrl Returns the full root relative URL including querystring and extra path as a string. /webstore/admin/paths.aspx?sku=wwhelp40 Url Returns a fully qualified URL including querystring and extra path. Note this is a Uri instance rather than string. http://www.west-wind.com/webstore/admin/paths.aspx?sku=wwhelp40 UrlReferrer The fully qualified URL of the page that sent the request. This is also a Uri instance and this value is null if the page was directly accessed by typing into the address bar or using an HttpClient based Referrer client Http header. http://www.west-wind.com/webstore/default.aspx?Info Control.TemplateSourceDirectory Returns the logical path to the folder of the page, master or user control on which it is called. This is useful if you need to know the path only to a Page or control from within the control. For non-file controls this returns the Page path. /webstore/admin/ As you can see there’s a ton of information available there for each of the three common path formats: Physical Path is an OS type path that points to a path or file on disk. Logical Path is a Web path that is relative to the Web server’s root. It includes the virtual plus the application relative path. ~/ (Root-relative) Path is an ASP.NET specific path that includes ~/ to indicate the virtual root Web path. ASP.NET can convert virtual paths into either logical paths using Control.ResolveUrl(), or physical paths using Server.MapPath(). Root relative paths are useful for specifying portable URLs that don’t rely on relative directory structures and very useful from within control or component code. You should be able to get any necessary format from ASP.NET from just about any path or script using these mechanisms. ~/ Root Relative Paths and ResolveUrl() and ResolveClientUrl() ASP.NET supports root-relative virtual path syntax in most of its URL properties in Web Forms. So you can easily specify a root relative path in a control rather than a location relative path: <asp:Image runat="server" ID="imgHelp" ImageUrl="~/images/help.gif" /> ASP.NET internally resolves this URL by using ResolveUrl("~/images/help.gif") to arrive at the root-relative URL of /webstore/images/help.gif which uses the Request.ApplicationPath as the basepath to replace the ~. By convention any custom Web controls also should use ResolveUrl() on URL properties to provide the same functionality. In your own code you can use Page.ResolveUrl() or Control.ResolveUrl() to accomplish the same thing: string imgPath = this.ResolveUrl("~/images/help.gif"); imgHelp.ImageUrl = imgPath; Unfortunately ResolveUrl() is limited to WebForm pages, so if you’re in an HttpHandler or Module it’s not available. ASP.NET Mvc also has it’s own more generic version of ResolveUrl in Url.Decode: <script src="<%= Url.Content("~/scripts/new.js") %>" type="text/javascript"></script> which is part of the UrlHelper class. In ASP.NET MVC the above sort of syntax is actually even more crucial than in WebForms due to the fact that views are not referencing specific pages but rather are often path based which can lead to various variations on how a particular view is referenced. In a Module or Handler code Control.ResolveUrl() unfortunately is not available which in retrospect seems like an odd design choice – URL resolution really should happen on a Request basis not as part of the Page framework. Luckily you can also rely on the static VirtualPathUtility class: string path = VirtualPathUtility.ToAbsolute("~/admin/paths.aspx"); VirtualPathUtility also many other quite useful methods for dealing with paths and converting between the various kinds of paths supported. One thing to watch out for is that ToAbsolute() will throw an exception if a query string is provided and doesn’t work on fully qualified URLs. I wrote about this topic with a custom solution that works fully qualified URLs and query strings here (check comments for some interesting discussions too). Similar to ResolveUrl() is ResolveClientUrl() which creates a fully qualified HTTP path that includes the protocol and domain name. It’s rare that this full resolution is needed but can be useful in some scenarios. Mapping Virtual Paths to Physical Paths with Server.MapPath() If you need to map root relative or current folder relative URLs to physical URLs or you can use HttpContext.Current.Server.MapPath(). Inside of a Page you can do the following: string physicalPath = Server.MapPath("~/scripts/ww.jquery.js")); MapPath is pretty flexible and it understands both ASP.NET style virtual paths as well as plain relative paths, so the following also works. string physicalPath = Server.MapPath("scripts/silverlight.js"); as well as dot relative syntax: string physicalPath = Server.MapPath("../scripts/jquery.js"); Once you have the physical path you can perform standard System.IO Path and File operations on the file. Remember with physical paths and IO or copy operations you need to make sure you have permissions to access files and folders based on the Web server user account that is active (NETWORK SERVICE, ASPNET typically). Note the Server.MapPath will not map up beyond the virtual root of the application for security reasons. Server and Host Information Between these settings you can get all the information you may need to figure out where you are at and to build new Url if necessary. If you need to build a URL completely from scratch you can get access to information about the server you are accessing: Server Variable Function and Example SERVER_NAME The of the domain or IP Address wwww.west-wind.com or 127.0.0.1 SERVER_PORT The port that the request runs under. 80 SERVER_PORT_SECURE Determines whether https: was used. 0 or 1 APPL_MD_PATH ADSI DirectoryServices path to the virtual root directory. Note that LM typically doesn’t work for ADSI access so you should replace that with LOCALHOST or the machine’s NetBios name. /LM/W3SVC/1/ROOT/webstore Request.Url and Uri Parsing If you still need more control over the current request URL or  you need to create new URLs from an existing one, the current Request.Url Uri property offers a lot of control. Using the Uri class and UriBuilder makes it easy to retrieve parts of a URL and create new URLs based on existing URL. The UriBuilder class is the preferred way to create URLs – much preferable over creating URIs via string concatenation. Uri Property Function Scheme The URL scheme or protocol prefix. http or https Port The port if specifically specified. DnsSafeHost The domain name or local host NetBios machine name www.west-wind.com or rasnote LocalPath The full path of the URL including script name and extra PathInfo. /webstore/admin/paths.aspx Query The query string if any ?id=1 The Uri class itself is great for retrieving Uri parts, but most of the properties are read only if you need to modify a URL in order to change it you can use the UriBuilder class to load up an existing URL and modify it to create a new one. Here are a few common operations I’ve needed to do to get specific URLs: Convert the Request URL to an SSL/HTTPS link For example to take the current request URL and converted  it to a secure URL can be done like this: UriBuilder build = new UriBuilder(Request.Url); build.Scheme = "https"; build.Port = -1; // don't inject port Uri newUri = build.Uri; string newUrl = build.ToString(); Retrieve the fully qualified URL without a QueryString AFAIK, there’s no native routine to retrieve the current request URL without the query string. It’s easy to do with UriBuilder however: UriBuilder builder = newUriBuilder(Request.Url); builder.Query = ""; stringlogicalPathWithoutQuery = builder.ToString(); What else? I took a look through the old post’s comments and addressed as many of the questions and comments that came up in there. With a few small and silly exceptions this update post handles most of these. But I’m sure there are a more things that go in here. What else would be useful to put onto this post so it serves as a nice all in one place to go for path references? If you think of something leave a comment and I’ll try to update the post with it in the future.© Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET  

    Read the article

  • Can't get the L2TP IPSEC up and running

    - by Maciej Swic
    i have an Ubuntu 11.10 (oneiric) server running on a ReadyNAS. Im planning to use this to accept ipsec+l2tp connections through a router. However, the connection is failing somewhere half through. Using Openswan IPsec U2.6.28/K3.0.0-12-generic and trying to connect with an iOS 5 iPhone 4S. This is how far i can get: auth.log: Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "PSK" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "L2TP-PSK-NAT" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "L2TP-PSK-noNAT" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "passthrough-for-non-l2tp" Jan 19 13:54:11 ubuntu pluto[1990]: listening for IKE messages Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: Trying new style NAT-T Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: ESPINUDP(1) setup failed for new style NAT-T family IPv4 (errno=19) Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: Trying old style NAT-T Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 192.168.19.99:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 192.168.19.99:4500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo 127.0.0.1:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo 127.0.0.1:4500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo ::1:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 2001:470:28:81:a00:27ff:* Jan 19 13:54:11 ubuntu pluto[1990]: loading secrets from "/etc/ipsec.secrets" Jan 19 13:54:11 ubuntu pluto[1990]: loading secrets from "/var/lib/openswan/ipsec.secrets.inc" Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [RFC 3947] method set to=109 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike] method set to=110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [8f8d83826d246b6fc7a8a6a428c11de8] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [439b59f8ba676c4c7737ae22eab8f582] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [4d1e0e136deafa34c4f3ea9f02ec7285] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [80d0bb3def54565ee84645d4c85ce3ee] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [9909b64eed937c6573de52ace952fa6b] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [Dead Peer Detection] Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: responding to Main Mode from unknown peer 95.*.*.233 Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: transition from state STATE_MAIN_R0 to state STATE_MAIN_R1 Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: STATE_MAIN_R1: sent MR1, expecting MI2 Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike (MacOS X): both are NATed Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: transition from state STATE_MAIN_R1 to state STATE_MAIN_R2 Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: STATE_MAIN_R2: sent MR2, expecting MI3 Jan 19 14:05:03 ubuntu pluto[1990]: ERROR: asynchronous network error report on eth0 (sport=500) for message to 95.*.*.233 port 500, complainant 95.*.*.233: Connection refused [errno 111, origin ICMP type 3 code 3 (not authenticated)] Router config UDP 500, 1701 and 4500 forwarded to 192.168.19.99 (Ubuntu server for ipsec). Ipsec passthrough enabled. /etc/ipsec.conf # /etc/ipsec.conf - Openswan IPsec configuration file # This file: /usr/share/doc/openswan/ipsec.conf-sample # # Manual: ipsec.conf.5 version 2.0 # conforms to second version of ipsec.conf specification config setup nat_traversal=yes #charonstart=yes #plutostart=yes protostack=netkey conn PSK authby=secret forceencaps=yes pfs=no auto=add keyingtries=3 dpdtimeout=60 dpdaction=clear rekey=no left=192.168.19.99 leftnexthop=192.168.19.1 leftprotoport=17/1701 right=%any rightprotoport=17/%any rightsubnet=vhost:%priv,%no dpddelay=10 #dpdtimeout=10 #dpdaction=clear include /etc/ipsec.d/l2tp-psk.conf /etc/ipsec.d/l2tp-psk.conf conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT # # PreSharedSecret needs to be specified in /etc/ipsec.secrets as # YourIPAddress %any: "sharedsecret" authby=secret pfs=no auto=add keyingtries=3 # we cannot rekey for %any, let client rekey rekey=no # Set ikelifetime and keylife to same defaults windows has ikelifetime=8h keylife=1h # l2tp-over-ipsec is transport mode type=transport # left=192.168.19.99 # # For updated Windows 2000/XP clients, # to support old clients as well, use leftprotoport=17/%any leftprotoport=17/1701 # # The remote user. # right=%any # Using the magic port of "0" means "any one single port". This is # a work around required for Apple OSX clients that use a randomly # high port, but propose "0" instead of their port. rightprotoport=17/%any dpddelay=10 dpdtimeout=10 dpdaction=clear conn passthrough-for-non-l2tp type=passthrough left=192.168.19.99 leftnexthop=192.168.19.1 right=0.0.0.0 rightsubnet=0.0.0.0/0 auto=route /etc/ipsec.secrets include /var/lib/openswan/ipsec.secrets.inc %any %any: PSK "my-key" 192.168.19.99 %any: PSK "my-key" /etc/xl2tpd/xl2tpd.conf [global] debug network = yes debug tunnel = yes ipsec saref = no listen-addr = 192.168.19.99 [lns default] ip range = 192.168.19.201-192.168.19.220 local ip = 192.168.19.99 require chap = yes refuse chap = no refuse pap = no require authentication = no ppp debug = yes pppoptfile = /etc/ppp/options.xl2tpd length bit = yes /etc/ppp/options.xl2tpd pcp-accept-local ipcp-accept-remote noccp auth crtscts idle 1800 mtu 1410 mru 1410 defaultroute debug lock proxyarp connect-delay 5000 ipcp-accept-local /etc/ppp/chap-secrets # Secrets for authentication using CHAP # client server secret IP addresses maciekish * my-secret * * maciekish my-secret * I can't seem to find the problem. Other ipsec connections to other hosts work from the network im currently at.

    Read the article

  • SSAS 2008 R2– Little Gems

    - by ACALVETT
    I have spent the last few days working with SSAS 2008 R2 and noticed a few small enhancements which many people probably won’t notice but i will list them here and why they are important to me. New profiler events Commit: This is a new sub class event for “progress report end”. This represents the elapsed time taken for the server to commit your data. It is important because for the duration of this event a server level lock will be in place blocking all incoming connections and causing time out...(read more)

    Read the article

< Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >