Search Results

Search found 11925 results on 477 pages for 'remote editing'.

Page 134/477 | < Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >

  • Can Remote Desktop connect only 2 monitors when the client has 3 or 4 monitors connected?

    - by user12931
    I have three monitors (all 1920x1200) connected to my desktop and I would like to RDP into another computer (running Windows Server 2003) and use only two of my three monitors. The main monitor is used for notification from the LAN like email, build status, etc. I've tried modifying the .rdp file to have a higher resolution (i.e. 3840x1200 ) which sort of works but the bits per pixel goes down to 8 and you have to manually resize the window which means that you need to change it to around 3840x1150. If I supply /span to the commandline it gives me a bit more than 3840 spanned across the three monitors (is there perhaps a limitation of say 4096 for the maximum resolution?). WORKAROUND: Connect twice to the same computer. Here's an interesting post from Microsoft: http://blogs.msdn.com/b/rds/archive/2009/08/21/remote-desktop-connection-7-for-windows-7-windows-xp-windows-vista.aspx

    Read the article

  • How do I run perfmon against a remote machine?

    - by WindyCityEagle
    For starters I'm trying to do this from a Windows 7 box to a Windows 7 box. I know the simple answer should be to enter \\computername where it says "Select Counters From Computer". Trouble is, every time I do that I get an error message that says "Unable to connect to machine" I know the machine is out there and accessible, because I can bring up windows explorer and enter \\computername\c$ in the explorer bar and then can browse their c drive. So the machine is out there. Are there special permissions for perfmon? Is here a service which needs to be running on the remote machine?

    Read the article

  • Automated monitoring of a remote system that sends email alerts.

    - by user23105
    I need to monitor a remote system where the only access I have is that I can subscribe to email alerts of completed/failed jobs. I would like a system that can monitor these emails and provide an SMS or other alert when: An email indicates failure. A process that was expected to complete by a given time has not. A process that was expected to complete N minutes after completion of another process has not completed. Are there any existing tools that allow this? I'd consider any option - SaaS, open-source, COTS, as long as I don't have to write it myself! Cheers, Blake

    Read the article

  • strange memory usage pattern on windows server 2008 on login through remote desktop..

    - by headsling
    I'm running Windows Server 2008 Datacenter Service Pack 2 on a VM Ware instance with 10Gb ram allocated. I'm not running IIS or SQL Server. Under 'normal' conditions, the machine uses ~5.5Gb of memory. However, when I login to the server through remote desktop, the memory usage slowly climbs up to 9.8Gb of memory in use. After several minutes the memory slowly creeps back down to the 5.5Gb mark. I've tried killing all the processes associated with my login, on login, barring the taskmanager without success, and I can't see any process that is growing in memory usage when the memory is increasing. I'm assuming this is some system level cache that is growing / shrinking... but why is it doing this?

    Read the article

  • Github file size limit changed 6/18/13. Can't push now

    - by slindsey3000
    How does this change as of June 18, 2013 affect my existing repository with a file that exceeds that limit? I last pushed 2 months ago with a large file. I have a large file that I have removed locally but I can not push anything now. I get a "remote error" ... remote: error: File cron_log.log is 126.91 MB; this exceeds GitHub's file size limit of 100 MB I added the file to .gitignore after original push... But it still exists on remote (origin) Removing it locally should get rid of it at origin(Github) right? ... but ... it is not letting me push because there is a file on Github that exceeds the limit... https://github.com/blog/1533-new-file-size-limits These are the commands I issued plus error messages.. git add . git commit -m "delete cron_log.log" git push origin master remote: Error code: 40bef1f6653fd2410fb2ab40242bc879 remote: warning: Error GH413: Large files detected. remote: warning: See http://git.io/iEPt8g for more information. remote: error: File cron_log.log is 141.41 MB; this exceeds GitHub's file size limit of 100 MB remote: error: File cron_log.log is 126.91 MB; this exceeds GitHub's file size limit of 100 MB To https://github.com/slinds(omited_here)/linexxxx(omited_here).git ! [remote rejected] master - master (pre-receive hook declined) error: failed to push some refs to 'https://github.com/slinds(omited_here) I then tried things like git rm cron_log.log git rm --cached cron_log.log Same error.

    Read the article

  • How best do you represent a bi-directional sync in a REST api?

    - by Edward M Smith
    Assuming a system where there's a Web Application with a resource, and a reference to a remote application with another similar resource, how do you represent a bi-directional sync action which synchronizes the 'local' resource with the 'remote' resource? Example: I have an API that represents a todo list. GET/POST/PUT/DELETE /todos/, etc. That API can reference remote TODO services. GET/POST/PUT/DELETE /todo_services/, etc. I can manipulate todos from the remote service through my API as a proxy via GET/POST/PUT/DELETE /todo_services/abc123/, etc. I want the ability to do a bi-directional sync between a local set of todos and the remote set of TODOS. In a rpc sort of way, one could do POST /todo_services/abc123/sync/ But, in the "verbs are bad" idea, is there a better way to represent this action?

    Read the article

  • Site-to-site VPN using MD5 instead of SHA and getting regular disconnection

    - by Steven
    We are experiencing some strange behavior with a site-to-site IPsec VPN that goes down about every week for 30 minutes (Iam told 30 minutes exactly). I don't have access to the logs, so it's difficult to troubleshoot. What is also strange is that the two VPN devices are set to use SHA hash algorithm but apparently end up agreeing to use MD5. Does anybody have a clue? or is this just insufficient information? Edit: Here is an extract of the log of one of the two VPN devices, which is a Cisco 3000 series VPN concentrator. 27981 03/08/2010 10:02:16.290 SEV=4 IKE/41 RPT=16120 xxxxxxxx IKE Initiator: New Phase 1, Intf 2, IKE Peer xxxxxxxx local Proxy Address xxxxxxxx, remote Proxy Address xxxxxxxx, SA (L2L: 1A) 27983 03/08/2010 10:02:56.930 SEV=4 IKE/41 RPT=16121 xxxxxxxx IKE Initiator: New Phase 1, Intf 2, IKE Peer xxxxxxxx local Proxy Address xxxxxxxx, remote Proxy Address xxxxxxxx, SA (L2L: 1A) 27986 03/08/2010 10:03:35.370 SEV=4 IKE/41 RPT=16122 xxxxxxxx IKE Initiator: New Phase 1, Intf 2, IKE Peer xxxxxxxx local Proxy Address xxxxxxxx, remote Proxy Address xxxxxxxx, SA (L2L: 1A) [… same continues for another 15 minutes …] 28093 03/08/2010 10:19:46.710 SEV=4 IKE/41 RPT=16140 xxxxxxxx IKE Initiator: New Phase 1, Intf 2, IKE Peer xxxxxxxx local Proxy Address xxxxxxxx, remote Proxy Address xxxxxxxx, SA (L2L: 1A) 28096 03/08/2010 10:20:17.720 SEV=5 IKE/172 RPT=1291 xxxxxxxx Group [xxxxxxxx] Automatic NAT Detection Status: Remote end is NOT behind a NAT device This end IS behind a NAT device 28100 03/08/2010 10:20:17.820 SEV=3 IKE/134 RPT=79 xxxxxxxx Group [xxxxxxxx] Mismatch: Configured LAN-to-LAN proposal differs from negotiated proposal. Verify local and remote LAN-to-LAN connection lists. 28103 03/08/2010 10:20:17.820 SEV=4 IKE/119 RPT=1197 xxxxxxxx Group [xxxxxxxx] PHASE 1 COMPLETED 28104 03/08/2010 10:20:17.820 SEV=4 AUTH/22 RPT=1031 xxxxxxxx User [xxxxxxxx] Group [xxxxxxxx] connected, Session Type: IPSec/LAN- to-LAN 28106 03/08/2010 10:20:17.820 SEV=4 AUTH/84 RPT=39 LAN-to-LAN tunnel to headend device xxxxxxxx connected 28110 03/08/2010 10:20:17.920 SEV=5 IKE/25 RPT=1291 xxxxxxxx Group [xxxxxxxx] Received remote Proxy Host data in ID Payload: Address xxxxxxxx, Protocol 0, Port 0 28113 03/08/2010 10:20:17.920 SEV=5 IKE/24 RPT=88 xxxxxxxx Group [xxxxxxxx] Received local Proxy Host data in ID Payload: Address xxxxxxxx, Protocol 0, Port 0 28116 03/08/2010 10:20:17.920 SEV=5 IKE/66 RPT=1290 xxxxxxxx Group [xxxxxxxx] IKE Remote Peer configured for SA: L2L: 1A 28117 03/08/2010 10:20:17.930 SEV=5 IKE/25 RPT=1292 xxxxxxxx Group [xxxxxxxx] Received remote Proxy Host data in ID Payload: Address xxxxxxxx, Protocol 0, Port 0 28120 03/08/2010 10:20:17.930 SEV=5 IKE/24 RPT=89 xxxxxxxx Group [xxxxxxxx] Received local Proxy Host data in ID Payload: Address xxxxxxxx, Protocol 0, Port 0 28123 03/08/2010 10:20:17.930 SEV=5 IKE/66 RPT=1291 xxxxxxxx Group [xxxxxxxx] IKE Remote Peer configured for SA: L2L: 1A 28124 03/08/2010 10:20:18.070 SEV=4 IKE/173 RPT=17330 xxxxxxxx Group [xxxxxxxx] NAT-Traversal successfully negotiated! IPSec traffic will be encapsulated to pass through NAT devices. 28127 03/08/2010 10:20:18.070 SEV=4 IKE/49 RPT=17332 xxxxxxxx Group [xxxxxxxx] Security negotiation complete for LAN-to-LAN Group (xxxxxxxx) Responder, Inbound SPI = 0x56a4fe5c, Outbound SPI = 0xcdfc3892 28130 03/08/2010 10:20:18.070 SEV=4 IKE/120 RPT=17332 xxxxxxxx Group [xxxxxxxx] PHASE 2 COMPLETED (msgid=37b3b298) 28131 03/08/2010 10:20:18.750 SEV=4 IKE/41 RPT=16141 xxxxxxxx Group [xxxxxxxx] IKE Initiator: New Phase 2, Intf 2, IKE Peer xxxxxxxx local Proxy Address xxxxxxxx, remote Proxy Address xxxxxxxx, SA (L2L: 1A) 28135 03/08/2010 10:20:18.870 SEV=4 IKE/173 RPT=17331 xxxxxxxx Group [xxxxxxxx] NAT-Traversal successfully negotiated! IPSec traffic will be encapsulated to pass through NAT devices.

    Read the article

  • using x11 forwarding with ssh and vnc?

    - by simona
    I am working on a remote cluster via ssh with the -X option, because I need to visualize data and graphs, over a vpn protocol. Sometime due to the instability of the internet connection I lose my session. They told me I could use vnc in order to not lose my current session, so that if the internet connection drops I can reconnect and continue with my previously open session. What I do is to log in the remote cluster 'remote.cluster' and type vncserver :1 then I open another terminal on my system and I type ssh -C -NL 5901:remote.cluster:5901 [email protected] & Then I start vinagre on my system and I connect using ssh protocol. The problem is that I do not have x11 forwarding and I cannot open windows. If I try to connect using the vnc protocol with vinagre it doesn't connect, because I get something as connection timeout. What should I do?

    Read the article

  • Recent Solaris Studio how-to articles

    - by unixman
    There were a few Oracle Solaris Studio articles published recently, check'em out! -How to Develop Code from a Remote Desktop with Oracle Solaris StudioThis article describes the remote desktop feature of the Oracle Solaris Studio IDE, and how to use it to compile, run, debug, and profile your code running on remote servers.-How to Use Remote Development in the IDEThis article describes the modes of remote development available in the Oracle Solaris Studio 12.3 IDE and how to choose the best one for your development environment.-Performance Tips for the Oracle Solaris Studio IDEThis article describes some tips and tricks to help you improve the performance of the Oracle Solaris Studio IDE.

    Read the article

  • Under which circumstances can a *local* user account access a remote SQL Server with a trusted connection?

    - by Heinzi
    One of our customers has the following configuration: On the domain controller, there's an SQL Server. On his PC (WinXP), he logs on with LocalPC\LocalUser. In Windows Explorer, he opens DomainController\SomeShare and authenticates as Domain\Administrator. He starts our application, which opens a trusted connection (Windows authentication) to the SQL Server. It works. In SSMS, the connection shows up with the user Domain\Administrator. Firstly, I was surprised that this even works. (My first suspicion was that there is a user with the same name and password in the domain, but there is no user LocalUser in the domain.) Then we tried to reproduce the same behaviour on his new PC, but failed: On his new PC (Win7), he logs on with OtherLocalPC\OtherLocalUser. In Windows Explorer, he opens DomainController\SomeShare and authenticates as Domain\Administrator. He starts our application, which opens a trusted connection (Windows authentication) to the SQL Server. It fails with the error message Login failed for user ''. The user is not associated with a trusted SQL Server connection. Hence my question: Under which conditions can a non-domain user access a remote SQL Server using Windows Authentication with different credentials? Apparently, it's possible (it works on his old PC), but why? And how can I reproduce it?

    Read the article

  • Why is SSH finding remote keys for other accounts?

    - by Brian Pontarelli
    This is a strange issue I'm having with SSH from my Macbook Pro to a Linux (Ubuntu 11.10) server. I have a DSA key setup on the remote Linux server under my home directory like this: /home/me/.ssh/authorzied_keys I also have the same DSA key setup for a few other accounts on the machine named "foo" and "bar". I can log into all of the accounts fine without any password. Therefore, the DSA keys are all setup correctly. The strange behavior I'm seeing is when debugging the SSH connection. During the connection, the SSH debug is outputting this: debug2: key: /Users/me/.ssh/id_dsa (0x7f91a1424220) debug2: key: /home/foo/.ssh/id_dsa (0x7f91a1425620) debug2: key: /home/bar/.ssh/id_rsa (0x7f91a1425c60) debug2: key: /Users/me/.ssh/id_rsa (0x0) This is strange for so many reasons, but essentially, why is SSH listing out keys on the server (/home/foo/.ssh/id_dsa and /home/bar/.ssh/id_rsa)? These files don't even exist on the server, so why are they listed? I'm not logging into the "foo" or "bar" accounts, so why is SSH even listing those? On my Macbook Pro, I only have a DSA key, but SSH is listing out an RSA key, what's that all about? Another user on the server doesn't get any of these messages when they log in and they have the exact same setup for their DSA key and the exact same Macbook Pro setup as mine? Does anyone know what these messages are and why SSH is outputting them?

    Read the article

  • git : The remote end hung up unexpectedly - too many simultaneous users?

    - by Pritam Barhate
    I asked this first on StackOverflow and I was suggested that I should ask it here: We have a self hosted git server (Gitolite) on a VPS account (CPU:2.68GHz RAM:1824MB). This same VPS is also used to publish our underdevelopment web apps for client demos. (Very little traffic). so the main use of the server is as a Git Server Only. This git server is accessed by a team of 30-40 people for various projects. Our problem is that during the day when 6-7 people are trying to access the server (sometimes same repo) we get frequent error message: ssh: connect to host xxx.xxx.xx.xx port 22: Bad file number fatal: The remote end hung up unexpectedly After trying for 10-15 minutes it generally succeeds. During early mornings and late nights when there are only 1-2 people, git commands work with 100% success rate. Also I would like to note that if I access the other file hosted on the server through HTTP it works fine. I found a couple of questions on StackOverflow and on other sites regarding this. But most of the people point towards SSH key set up or conflicts between Msysgit and Cygns SSH. However I don't think this is the problem in our case as we get this behavior on Windows (using msysgit only) as well as Mac Machines. Also if it was SSH configuration issue then it shouldn't work at all. But in our case it works after 10-15 minutes. I think in our case it might be too many simultaneous connections to same server (or same repo) or something like that. Does there exists a setting or a conf file that needs to modified to solve this problem? Please help me solve this problem or point me in the right direction. Thanks in advance. Pritam.

    Read the article

  • Issue with SSH on Ubuntu - Local connection ok, remote connection - Is it me or my ISP?

    - by Benjamin
    I have an issue with a server running Ubuntu 12.04, I am trying to set up a remote connection so I can access the server at my work from out of town. I have installed the SSH server and all that stuff, and I have reassigned the default port from 22 to 3399. A local connection from any OS can connect on the 192.168... address, but in no way can I get a connection on the actual IP address. I believe my configuration is correct, and I will attach it. If I have done something wrong in the config, please tell me and I will make a change to it. I honestly think that the Router that my ISP provided is horrible, and although the port for ssh is forwarded, it might be stopping any traffic coming inbound. Is there anything I can try to verify this? /var/log/auth does not show any error when I connect VIA our static IP. I have included all values not commented out below: (sshd_config) Port 3399 ListenAddress 0.0.0.0 Protocol 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key HostKey /etc/ssh/ssh_host_ecdsa_key UsePrivilegeSeparation yes KeyRegenerationInterval 3600 ServerKeyBits 768 SyslogFacility AUTH LogLevel INFO LoginGraceTime 120 PermitRootLogin yes StrictModes yes UseDNS no RSAAuthentication yes IgnoreRhosts yes RhostsRSAAuthentication no HostbasedAuthentication no PermitEmptyPasswords no ChallengeResponseAuthentication no PasswordAuthentication yes GSSAPIAuthentication no X11Forwarding yes X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server UsePAM yes Am I doing this wrong? port forwarding image

    Read the article

  • Does Xenapp require Windows Terminal Services (Remote Desktop) licenses?

    - by John Virgolino
    We have a Xenapp 5.x server running for over a year now. It does not have any purchased Terminal Services (Remote Desktop) licenses installed. It is running on a Windows 2008 Server box. I am aware that Terminal Services runs fine for about 3 months and then supposedly stops issuing licenses. On occasion, Xenapp stops working and we see lots of License errors in the event log, although not necessarily every time. In most cases, a reboot or 2 resolves the problem. We figured it was because of the lack of TS licenses. I spoke with Citrix and they said we had to have the licenses, but it begs the question that if we have to have the licenses, how does it work the majority of the time without them!!?? I have not received a straight answer yet and before I tell my client to shell out more money, I need to understand the technical reasoning for how this is actually working if we are breaking the rules here. We will buy the licenses if necessary, but there has to be an explanation for this. I am hoping the community can help where Citrix apparently cannot. Thanks much!

    Read the article

  • Is it possible to ack nagios alerts from the terminal on a remote workstation?

    - by cat pants
    I have nagios alerts set up to come through jabber with an http link to ack. Is is possible there is a script I can run from a terminal on a remote workstation that takes the hostname as a parameter and acks the alert? ./ack hostname The benefit, while seemingly mundane, is threefold. First, take http load off nagios. Secondly, nagios http pages can take up to 10-20 seconds to load, so I want to save time there. Thirdly, avoiding slower use of mouse + web interface + firefox/other annoyingly slow browser. Ideally, I would like a script bound to a keyboard shortcut that simply acks the most recent alert. Finally, I want to take the inputs from a joystick, buttons and whatnot, and connect one to a big red button bound to the script so I can just ack the most recent nagios alert by hitting the button lol. (It would be rad too if the button had a screen on the enclosure that showed the text of the alert getting acked lol) Make fun of me all you want, but this is actually something that would be useful to me. If I can save five seconds per alert, and I get 200 alerts per day I need to ack, that's saving me 15 minutes a day. And isn't the whole point of the sysadmin to automate what can be automated? Thanks!

    Read the article

  • How to build a windows/web application that stores data locally and sync's with remote database?

    - by Jason
    Hello, I am needing to build an application that stores data locally and then synchronizes with a remote MS SQL database. I am not sure how to go about doing this. Enter data offline on a form and store the data. Synchronize the data with a remote MS SQL database when online. There will be many users who enter data offline, the local database on each pc needs to update when online and grab the 30 most recent records for use offline. Example: Each day users will enter data on their "form". The users will be offline. The users will return to the office and need to sync with the "online" database. The next morning the users will need to sync with the online database before going offline. They will need to have offline access to the 30 most recent records. (They will use the 30 records for charting/graphing while they are offline) I am very new to building apps. I have VS 2010. I am wondering where to start? What language to use? Is there a "framework" for doing this type of app? Any info or suggestions would be greatly appreciated. Thanks!

    Read the article

  • can JockerSoft.Media read/get video file from remote location?

    - by Lynx
    here is the code for JockerSoft.Media // Path of the video and frame storing path string _videopath = "http://www.test.com/Video/test.avi"; //"C:\\test.avi"; string _imagepath = "C:\\test.jpg" Bitmap bmp = FrameGrabber.GetFrameFromVideo(_videopath, 0.1d); bmp.Save(_imagepath, System.Drawing.Imaging.ImageFormat.Gif); // Save directly frame on specified location FrameGrabber.SaveFrameFromVideo(_videopath, 0.1d, _imagepath); it work perfectly is the video file is from my own computer, but when i try to get video file from remote location it not getting the frame. well, all the example is for windwos form app and i trying to use this for web-application. is there maybe an additional coding that enable me to use jockersoft to grab a video frame from remote location? here is the error that i got: Attempted to access an unloaded appdomain. (Exception from HRESULT: 0x80131014) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.AppDomainUnloadedException: Attempted to access an unloaded appdomain. (Exception from HRESULT: 0x80131014) New Learner, please guide me..

    Read the article

  • Is it possible to reference remote content from chrome.manifest? (XULRunner)

    - by siemaa
    Hi, I have a xulrunner application and I've been trying to reference remote content from chrome.manifest file. Tt's an application for the company I work in; it's run on a number of computers (most of them are used by other employees as well) as a kind of an internet monitoring service. The problem I'd like to solve is this: updating the code of such application usually requires me to manually copy the modified files to every computer that the application is running on (I've had no luck trying to make automatic updates via xulrunner platform). This process has become very tedious. What I'd like to have is a web server, where all of the xul and js files would be accessible, so that every application could reference them from there. This would require me only to update the code on that server, and the applications (when restarted) would automatically get the latest code. What I managed to do: I can reference js scripts from a xul file using http based urls and everything works fine (I can use local, binary components etc.), although the xul file has to be local - that I'd like to change. But when I write in chrome.manifest a line like: content my_app http://path/to/app/files/ and then use the line in default/preferences/pref.js pref("toolkit.defaultChromeURI", "chrome://my_app/content/my_app.xul"); it just opens a console window (to test I manually run the application with the -console option) and no code gets executed. The file can be downloaded remotely using wget so I guess this isn't the web server issue. The applications work on Windows machines. Is there some kind of security issue causing such behavior or am I doing something wrong? Is it even possible to register remote, http based content as chrome?

    Read the article

  • VPN iptables Forwarding: Net-to-net

    - by Mike Holler
    I've tried to look elsewhere on this site but I couldn't find anything matching this problem. Right now I have an ipsec tunnel open between our local network and a remote network. Currently, the local box running Openswan ipsec with the tunnel open can ping the remote ipsec box and any of the other computers in the remote network. When logged into on of the remote computers, I can ping any box in our local network. That's what works, this is what doesn't: I can't ping any of the remote computers via a local machine that is not the ipsec box. Here's a diagram of our network: [local ipsec box] ----------\ \ [arbitrary local computer] --[local gateway/router] -- [internet] -- [remote ipsec box] -- [arbitrary remote computer] The local ipsec box and the arbitrary local computer have no direct contact, instead they communicate through the gateway/router. The router has been set up to forward requests from local computers for the remote subnet to the ipsec box. This works. The problem is the ipsec box doesn't forward anything. Whenever an arbitrary local computer pings something on the remote subnet, this is the response: [user@localhost ~]# ping 172.16.53.12 PING 172.16.53.12 (172.16.53.12) 56(84) bytes of data. From 10.31.14.16 icmp_seq=1 Destination Host Prohibited From 10.31.14.16 icmp_seq=2 Destination Host Prohibited From 10.31.14.16 icmp_seq=3 Destination Host Prohibited Here's the traceroute: [root@localhost ~]# traceroute 172.16.53.12 traceroute to 172.16.53.12 (172.16.53.12), 30 hops max, 60 byte packets 1 router.address.net (10.31.14.1) 0.374 ms 0.566 ms 0.651 ms 2 10.31.14.16 (10.31.14.16) 2.068 ms 2.081 ms 2.100 ms 3 10.31.14.16 (10.31.14.16) 2.132 ms !X 2.272 ms !X 2.312 ms !X That's the IP for our ipsec box it's reaching, but it's not being forwarded. On the IPSec box I have enabled IP Forwarding in /etc/sysctl.conf net.ipv4.ip_forward = 1 And I have tried to set up IPTables to forward: *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [759:71213] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 25 -j ACCEPT -A INPUT -p udp -m state --state NEW -m udp --dport 500 -j ACCEPT -A INPUT -p udp -m state --state NEW -m udp --dport 4500 -j ACCEPT -A INPUT -m policy --dir in --pol ipsec -j ACCEPT -A INPUT -p esp -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -s 10.31.14.0/24 -d 172.16.53.0/24 -j ACCEPT -A FORWARD -m policy --dir in --pol ipsec -j ACCEPT -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT Am I missing a rule in IPTables? Is there something I forgot? NOTE: All the machines are running CentOS 6.x Edit: Note 2: eth1 is the only network interface on the local ipsec box.

    Read the article

  • pfsense multi-site VPN VOIP deployment

    - by sysconfig
    have main office pfsense firewall configured like this: local networks WAN - internet LAN - local network VOIP - IP phones need to connect remote offices (multi-users) and single remote users (from home) use IPSEC or OpenVPN to build "permanent" automatically connecting tunnels from remote location to main location. in remote locations, network will look like this: WAN - internet LAN - local network multiple users VOIP - multiple IP phones in order for the IP phones to work they have to be able to "see" the VOIP network and the VOIP server back at the main office for single remote users ( like from home ) the setup will be similar but only one phone and one computer so questions: best way to tie networks together? IPSEC or OpenVPN can this be setup to automatically connect ? any issues/suggestions with that design/topology ? QoS or issues with running the VOIP traffic over a VPN throughput, quality etc.. obviously depends on remote locations connection to some degree

    Read the article

  • pfsense multi-site VPN VOIP deployment

    - by sysconfig
    have main office pfsense firewall configured like this: local networks WAN - internet LAN - local network VOIP - IP phones need to connect remote offices (multi-users) and single remote users (from home) use IPSEC or OpenVPN to build "permanent" automatically connecting tunnels from remote location to main location. in remote locations, network will look like this: WAN - internet LAN - local network multiple users VOIP - multiple IP phones in order for the IP phones to work they have to be able to "see" the VOIP network and the VOIP server back at the main office for single remote users ( like from home ) the setup will be similar but only one phone and one computer so questions: best way to tie networks together? IPSEC or OpenVPN can this be setup to automatically connect ? any issues/suggestions with that design/topology ? QoS or issues with running the VOIP traffic over a VPN throughput, quality etc.. obviously depends on remote locations connection to some degree

    Read the article

  • .htaccess working on remote server but does not work on localhost. Getting 404 errors on localhost

    - by Afsheen Khosravian
    MY PROBLEM: When I visit localhost the site does not work. It shows some text from the site but it seems the server can not locate any other files. Here is a snippet of the errors from firebug: "NetworkError: 404 Not Found - localhost/css/popup.css" "NetworkError: 404 Not Found - localhost/css/style.css" "NetworkError: 404 Not Found - localhost/css/player.css" "NetworkError: 404 Not Found - localhost/css/ui-lightness/jquery-ui-1.8.11.custom.css" "NetworkError: 404 Not Found - localhost/js/jquery.js" It seems my server is looking for the files in the wrong places. For example, localhost/css/popup.css is actually located at localhost/app/webroot/css/popup.css. I have my site setup on a remote server with the same exact configurations and it works perfectly fine. I am just having this issue trying to run the site on my laptop at localhost. I edited my VirtualHosts file DocumentRoot and to /home/user/public_html/site.com/public/app/webroot/ and this reduces some errors but I feel that this is wrong and sort of hacking it since I didn't use these setting on my production server which works. The last note I want to make is that the website uses dynamic URLs. I dont know if that has anything to do with it. For example, on the production server the URLS are: site.com/#hello/12321. HERES WHAT I AM WORKING WITH: I have a LAMP server setup on my laptop which runs on Ubuntu 11.10. I have enabled mod_rewrite: sudo a2enmod rewrite Then I edited my Virtual Hosts file: <VirtualHost *:80> ServerName localhost DirectoryIndex index.php DocumentRoot /home/user/public_html/site.com/public <Directory /home/user/public_html/site.com/public/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> </VirtualHost> Then I restarted apache. My website is using cakePHP. This is the directory structure of the website: "/home/user/public_html/site.com/public" contains: index.php app cake plugins vendors These are my .htaccess files: /home/user/public_html/site.com/public/app/.htaccess: <IfModule mod_rewrite.c> RewriteEngine on RewriteRule ^$ webroot/ [L] RewriteRule (.*) webroot/$1 [L] </IfModule> /home/user/public_html/site.com/public/app/webroot/.htaccess: <IfModule mod_rewrite.c> RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*)$ index.php?url=$1 [QSA,L] </IfModule>

    Read the article

  • SSH tunnel RDP through gateway server outside the network?

    - by Mike
    I need to access a PC via RDP that is behind a firewall. There's no way to connect to it directly that I know of. What I'd like to do is SSH from that remote PC to my home Ubuntu server, then connect to the remote PC using my home PC with the Ubuntu server as a gateway. I've tried SSH from remote PC to Ubuntu server, tunneling remote port 3389 to 127.0.0.1:3389, then SSH from home PC to Ubuntu server, tunneling local port 13389 to remote port 3389. At that point I try to RDP into: 127.0.0.1:13389, 127.0.0.2:13389, :3389 - no dice. I suppose I could simply set up an SSH server on my home PC and SSH from remote PC into home PC and then establish the tunnel that way, but I'd rather not go through the hassle of installing and configuring an ssh server on my home PC. I know LogMeIn would work here, but I don't want to go that route for various reasons. Any ideas? Thanks!

    Read the article

  • rsync -c -i flags identical files as different

    - by Scott
    My goal: given a list of files on local server, show any differences to the files with the same absolute path on remote server; e.g. compare local /etc/init.d/apache to same file on remote server. "Difference" for me means different checksum. I don't care about file modification times. I also do not want to sync the files (yet); only show the diffs. I have rsync 3.0.6 on both local and remote servers, which should be able to do what I want. However, it is claiming that local and remote files, even with identical checksums, are still different. Here's the command line: $ rsync --dry-run -avi --checksum --files-from=/home/me/test.txt --rsync-path="cd / && rsync" / me@remote:/ where: "me" = my username; "remote" = remote server hostname current working directory is '/' test.txt contains one line reading "/etc/init.d/apache" OS: Linux 2.6.9 Running cksum on /etc/init.d/apache on both servers yields the same result. The files are the same. However, rsync output is: me@remote's password: building file list ... done .d..t...... etc/ cd+++++++++ etc/init.d/ <f+++++++++ etc/init.d/apache sent 93 bytes received 21 bytes 20.73 bytes/sec total size is 2374 speedup is 20.82 (DRY RUN) The output codes (see http://www.samba.org/ftp/rsync/rsync.html) mean that rsync thinks /etc is identical except for mod time /etc/init.d needs to be changed /etc/init.d/apache will be sent to the remote server I don't understand how, with --checksum option, and the files having identical checksums, that rsync should think they're different. (I've tried with other files having identical mod times, and those files are not flagged as different.) I did run this in /, and made sure (AFAIK) that it's run remotely in /, so even relative pathnames will still be correct. I ran rsync with -avvvi for more debug info, but saw nothing remarkable. I'm wondering: is rsync still looking at file mod times, even with --checksum? am I somehow not setting up the path(s) right? what am I doing wrong?

    Read the article

  • How switch between screen inside screen?

    - by André Andrade
    I have to work inside two environment. One Windows (local) and one Linux (remote). I've installed the screen linux utility in both. I'm able to open a screen on my windows, then in one tab, I opened a ssh connection to the linux remote and I start another screen. Sample linux -- |0 linux remote 0| 1 linux remote 1 windows-- |0 linux | 9 windows I can switch between "linux remote 0" and "linux remote 1" using Atl+. This is configured in .screenrc (bindkey "^[0" select 0) How could I switch to "9 windows"?

    Read the article

< Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >