Search Results

Search found 29864 results on 1195 pages for 'ubuntu 8 04'.

Page 134/1195 | < Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >

• Upgrading Ubuntu to 9.04 breaks ATI video card driver, VESA and ati/radeon drivers

  - by Neil

  I upgraded my Ubuntu 8.10 to 9.04, and it not only broke the ATI proprietary fglrx driver, but also the ability to use the VESA or open-source ati or radeon drivers. I have an ATI RV610 which is an ATI Radeon HD 2400 XT. I have Linux Kernel 2.6.27-14-generic and 2.6.28-13-generic. With fglrx, vesa, ati and radeon, the Xserver hangs the machine as soon as it starts by invoking X or startx, which is seen by observing that caps lock doesn't work. There's nothing useful in /var/log/Xorg.0.log, no errors at all. This is with either kernel. When I download a new proprietary driver from ATI, I install it successfully on kernel 2.6.27, and it doesn't hang when X starts up, but it just shows a blank screen and does nothing. I also can't CTRL+ALT+Backspace out of X at this point. In all the years I've used ATI's Linux drivers, this has happened almost every time I've upgraded my kernel, but it's been fixable with much effort. This time I'm really stuck. Does anyone know how to fix these problems?

  Read the article

• ubuntu 9.10 cups server cupsd.conf

  - by aaron

  i have a cups server running on ubuntu 9.10 on my home network. right now i can access it at 192.168.1.101:631, but when i try to access it at myservername.local:631 i get a 400 Bad Request. here's the relevant section from my current cupsd.conf: ServerName 192.168.1.101 # Only listen for connections from the local machine. Listen localhost:631 Listen /var/run/cups/cups.sock # any of the below 'Listen' directives all yield the same result Listen 192.168.1.101:631 #Listen *:631 #Listen myservername.local:631 # Show shared printers on the local network. Browsing On BrowseOrder allow,deny BrowseAllow all BrowseLocalProtocols CUPS dnssd BrowseAddress 192.168.1.255 # Default authentication type, when authentication is required... DefaultAuthType Basic # Restrict access to the server... <Location /> Order deny,allow Deny from All Allow from 127.0.0.1 Allow from 192.168.1.* </Location> # Restrict access to the admin pages... <Location /admin> Order deny,allow Deny from All #Allow from 127.0.0.1 #Allow from 192.168.1.* </Location> # Restrict access to configuration files... <Location /admin/conf> AuthType Default Require user @SYSTEM Order deny,allow Deny from All #Allow from 127.0.0.1 #Allow from 192.168.1.* </Location> i get the following in /var/log/cups/error_log: E [03/Jan/2010:18:33:41 -0600] Request from "192.168.1.100" using invalid Host: field "myservername.local:631" what do i need to do to be able to access the cups server at both 192.168.1.101:631 and myservername.local:631?

  Read the article

• Ubuntu virtual memory caches suck up memory

  - by Tom

  Hey all, I've got an Ubuntu 9.10 64-bit server that seems to use up all available memory. According to my munin graphs, almost all of the memory used up is in the swap cache, cache, and slab cache. (I take this to mean virtual memory caches, am I right in assuming this?) Once memory usage approaches 100%, some (although not all) system services such as SSH become sluggish and unresponsive. After rebooting the system, performance and memory usage become normal for a time. Some interesting tidbits: The system runs Apache 2, MySQL, Munin, and sshd. The memory usage spikes happen at the same time every night (at 10 PM sharp.) There appears to be nothing in the crontab for any of the users, and nothing in /etc/cron.d/* out of the ordinary, let alone something that would occur at 10 PM. My question is, how do I figure out what is causing the memory suckage? I've tried the usual utilities (e.g. ps, top, etc) but I can't seem to find anything unusual. Any ideas? Thanks in advance!

  Read the article

• Automount in Ubuntu 9.10

  - by easyrider

  Hi, By default Ubuntu doesn't mount internal NTFS hard drives automatically. A fstab solution not working properly, because of conflicts with the "intelligent" mount system. If I add my hd in fstab and reboot - it will be mounted. But if I go to nautilus, open places panel and click eject button (unmount) and than click on hd again to mount it, I will get an error. In 9.04 to solve this problem you need to modify hal rules in /etc/hal/... preferences.fdi in my case I modified it for only one drive. <device> - <match key="storage.hotpluggable" bool="false"> - <match key="storage.removable" bool="false"> <merge key="storage.automount_enabled_hint" type="bool">false</merge> - <match key="storage.model" string="ST3250310NS"> <merge key="storage.automount_enabled_hint" type="bool">true</merge> </match> </match> </match> </device> But this is not working in 9.10 - devs removed this function from hal to devkit-disk or udev? I don't know. Could you please tell me where automount rules are stored in 9.10? And how to create new rules, and what program controls automount in 9.10?

  Read the article

• Ubuntu software stack to mimic Active Directory auth

  - by WickedGrey

  I'm going to have an Ubuntu 11.10 box in a customer's data center running a custom webapp. The customer will not have ssh access to the box, but will need authentication and authorization to access the webapp. The customer needs to have the option of either pointing the webapp at something that we've installed locally on the machine, or to use an Active Directory server that they have. I plan on using a standard "users belong to groups; groups have sets of permissions; the webapp requires certain permissions to respond" auth setup. What software stack can I install locally that will allow an easy switch to and from an Active Directory server, while keeping the configuration as simple as possible (both for me and the end customer)? I would like to use as much off-the-shelf software for this as possible; I do not want to be in the business of keeping user passwords secure. I could see handling the user/group/permission relationships myself if there is not a good out-of-the-box solution (but that seems highly unlikely). I will accept answers in the form of links to "here is what you need" pages, but not "here is what Kerberos does" unless that page also tells me if it's required for my use case (essentially, I know that AD can speak Kerberos, but I can't tell if I need it to, or if I can just use LDAP, or...).

  Read the article

• Creating a custom ubuntu ISO

  - by ajstack

  Hi, I want to create a custom ubuntu ISO (This ISO will contain all the packages with the latest updates released till date). Something along the lines of Take the pristine ubuntu ISO Download the updates from some ubuntu update repositories Re-create the ISO? How should I go about this?

  Read the article

• Ubuntu NBR karmic boot freezes at fsck from util-linux-ng 2.16

  - by BlueBill

  Hi all, I have a netbook (emachine e250 - equivalent to an acer aspire one) and I have Ubunutu NBR 9.10 installed on it. Every other cold boot freezes at the following error message: "fsck from util-linux-ng 2.16" There is no disk activity, no activity what so ever. I have left the machine sit for over an hour and nothing. It takes a couple of hard resets to be able to boot properly. Once it boots everything works great (wireless, suspend/resume, etc.)! I have spent the last couple of weeks researching the problem and the only thing that seems to work is setting nolapic in the boot string in grub - it boots every time. Unfortunately, nolapic disables the second core and causes problems with suspend resume. At first I thought it was an fsck problem with the first partition on the hard disk as it is a hidden ntfs partition containing the windows xp recover information. So in /etc/fstab I set the partition so that it would be ignored by fsck. This didn't seem to do anything. I have these partitions: /dev/sda1 - an ntfs recovery partition /dev/sda2 - /boot /dev/sda3 - swap /dev/sda5 - / /dev/sda6 - /home I am running kernel version 2.6.31-19-generic and have all the patches (as indicated by update manager). I also have no splash screen so I can see the boot progress. I have only been using NBR since January, I have been using Ubuntu on my desktop since last June (2009-06). What logs should I be looking at? Is there a log for failed boots? Thanks, Troy

  Read the article

• Nginx + uWSGI on a fresh Ubuntu install - bind error port 80

  - by knuckfubuck

  I know this is a common problem usually having to do with apache or another service already running on port 80 and I have done a lot of searching and running netstat and still have not figured out why I am getting this error. I rebuilt my slice, did a fresh install of Ubuntu 10.04 and setup nginx + uwsgi. It worked and I was able to see my Django site. I then installed Postgres8.4 and the rest of the stack needed for Geodjango from this link. After that was done I tried to restart nginx and I get this error: sudo /etc/init.d/nginx start Starting nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok configuration file /usr/local/nginx/conf/nginx.conf test is successful [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: still could not bind() I have nginx set to listen 80. Here's an output from netstat -l --numeric-ports | grep 80: tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:8000 0.0.0.0:* LISTEN Output from sudo lsof +M -i4: nginx 2330 root 8u IPv4 3195 0t0 TCP *:www (LISTEN) nginx 2331 www-data 8u IPv4 3195 0t0 TCP *:www (LISTEN) uwsgi 2335 s 4u IPv4 3259 0t0 TCP localhost:8000 (LISTEN) uwsgi 2352 s 4u IPv4 3259 0t0 TCP localhost:8000 (LISTEN) uwsgi 2353 s 4u IPv4 3259 0t0 TCP localhost:8000 (LISTEN) uwsgi 2354 s 4u IPv4 3259 0t0 TCP localhost:8000 (LISTEN) uwsgi 2355 s 4u IPv4 3259 0t0 TCP localhost:8000 (LISTEN) Anyone have any other ideas how I can figure out what is blocking port 80? edit Paste of my /etc/init.d/nginx script here: http://dpaste.com/hold/400937/

  Read the article

• memcached append() php ubuntu - bad protocol

  - by awongh

  I am running ubuntu gutsy(7.1) , php5 and I am trying to get memcached running locally. I installed everything as per the docs: memcached daemon, php PECL extension, libevent, etc. But now I can only run half of the example script for memcached append(): <?php $m = new Memcached(); $m->addServer('localhost', 11211); $m->setOption(Memcached::OPT_COMPRESSION, false); $m->set('foo', 'abc'); $m->append('foo', 'def'); var_dump($m->get('foo')); ?> the script terminates @ append() with an RES_BAD_PROTOCOL error message. It still runs the get(). I don't know why memcached would otherwise be working fine (connect, set, get - with the correct value of 'abc') and not work for append. it also doesnt work with prepend. I believe I have the setup correct, but I am not sure. Maybe there are compatibility problems between the versions of the dependecies? thanks much

  Read the article

• ssh-agent on ubuntu rapidly restarts

  - by Santa Claus

  I am attempting to use ssh-agent on Ubuntu 13.10 so that I will not have to enter my passphrase to unlock a key every time I want to use ssh or git. As you can see below, ssh-agent appears to be restarting for some reason. These commends were executed within a period of less than 5 seconds: andrew@zaphod:~$ ssh-agent SSH_AUTH_SOCK=/tmp/ssh-pqm5J0s70NxG/agent.2820; export SSH_AUTH_SOCK; SSH_AGENT_PID=2821; export SSH_AGENT_PID; echo Agent pid 2821; andrew@zaphod:~$ ssh-agent SSH_AUTH_SOCK=/tmp/ssh-VpkOH2WKjT1M/agent.2822; export SSH_AUTH_SOCK; SSH_AGENT_PID=2823; export SSH_AGENT_PID; echo Agent pid 2823; andrew@zaphod:~$ ssh-agent SSH_AUTH_SOCK=/tmp/ssh-EQ6X9JHNiBOO/agent.2824; export SSH_AUTH_SOCK; SSH_AGENT_PID=2825; export SSH_AGENT_PID; echo Agent pid 2825; andrew@zaphod:~$ ssh-agent SSH_AUTH_SOCK=/tmp/ssh-8Iij8kFkaapz/agent.2826; export SSH_AUTH_SOCK; SSH_AGENT_PID=2827; export SSH_AGENT_PID; echo Agent pid 2827; andrew@zaphod:~$ My guess is that ssh-agent is crashing, but how would I know? What log file would it log to?

  Read the article

• Tomcat 7 on Ubuntu 12.04 startup issues

  - by Nico Huysamen

  I am having trouble getting tomcat 7 to start up on my new VPS. I am really scratching my head since I have done this often. So I'm thinking it might be the VPS. I just got a new VPS from CINFU. After a clean install of Ubuntu 12.04 32bit, I install openjdk-6-jdk, update JAVA_HOME to point to: /usr/lib/jvm/java-1.6.0-openjdk-i386 and JRE_HOME to: /usr/lib/jvm/java-1.6.0-openjdk-i386/jre But when I try to run: ./catalina.sh run it simply outputs: Using CATALINA_BASE: /opt/tomcat/apache-tomcat-7.0.29 Using CATALINA_HOME: /opt/tomcat/apache-tomcat-7.0.29 Using CATALINA_TMPDIR: /opt/tomcat/apache-tomcat-7.0.29/temp Using JRE_HOME: /usr/lib/jvm/java-1.6.0-openjdk-i386 Using CLASSPATH: /opt/tomcat/apache-tomcat-7.0.29/bin/bootstrap.jar:/opt/tomcat/apache-tomcat-7.0.29/bin/tomcat-juli.jar and stops. It just hangs there doing nothing. If I run ./startup.sh && tail -f ../logs/catalina.out it gets to: Aug 24, 2012 8:38:36 PM org.apache.coyote.AbstractProtocol init INFO: Initializing ProtocolHandler ["http-bio-8080"] Aug 24, 2012 8:38:36 PM org.apache.coyote.AbstractProtocol init INFO: Initializing ProtocolHandler ["ajp-bio-8009"] Aug 24, 2012 8:38:36 PM org.apache.catalina.startup.Catalina load INFO: Initialization processed in 495 ms Aug 24, 2012 8:38:36 PM org.apache.catalina.core.StandardService startInternal INFO: Starting service Catalina Aug 24, 2012 8:38:36 PM org.apache.catalina.core.StandardEngine startInternal INFO: Starting Servlet Engine: Apache Tomcat/7.0.29 but I am unable to access anything. The request just hangs. I have also tried a few other things like explicitly exporting the paths etc in catalina.sh, and running ./startup.sh rather than catalina.sh, but the furthest I have gotten is that it finishes deploying all the WARs (the default ones that comes with tomcat like the host-manager etc), but then it hangs: Aug 24, 2012 8:47:30 PM org.apache.coyote.AbstractProtocol init INFO: Initializing ProtocolHandler ["http-bio-8080"] and does nothing. Anyone have any pointers that might help? As I said, I must really be missing something stupid since this has worked on all other VPSs that we have. UPDATE I figured out that the problem is actually the fact that they use OpnVZ virtualization and that there are known compatibility problems with Java.

  Read the article

• TomTom GO & Ubuntu Linux: impersonating a GPRS phone with dund

  - by Broam

  Background: I've called TomTom support, and they don't support Linux. I can get my GO 730 to mount Mass Storage, and I found a shell script that will allow me to install maps (haven't tried it; will update when I do.). As of note: USB 2.0 only. 1.1 ports will not work. However--I still can't update the TomTom or take advantage of any traffic services. The GO will connect to a mobile phone, but I don't have one that supports tethering. However, I've found a site that claims to know a way to get a Linux Machine to impersonate a phone advertising GPRS services and it apparently works in Fedora as old as FC4. I'm having some serious trouble getting this to work on Ubuntu 9.10 Karmic, mainly because I think some of the built-in bluetooth stuff is getting in the way. Changing the class bits in main.conf (hcid.conf does not exist) doesn't crash..., and dund starts and listens, but the TomTom device never seems to want to connect to my machine. I haven't played around much with sdcptool (I think that's the name, not in front of a Linux machine right now) but maybe I have to advertise the DUN profile...I'm not very sure. My Question: I have no way to diagnose the problems. What are some diagnostic tools I can use to help dig down and figure out what's going on? Update: apparently dund is a legacy tool that's going away. What replaces it?

  Read the article

• Preseeding Ubuntu partman recipe using LVM and RAID

  - by Swav

  I'm trying to preseed Ubuntu 12.04 server installation and created a recipe that would create RAID 1 on 2 drives and then partition that using LVM. Unfortunately partman complains when creating LVM volumes saying there no partitions in recipe that could be used with LVM (in console it complains about unusable recipe). The layout I'm after is RAID 1 on sdb and sdc (installing from USB stick so it takes sda) and then use LVM to create boot, root and swap. The odd thing is that if I change the mount point of boot_lv to home the recipe works fine (apart from mounting in wrong place), but when mounting at /boot it fails I know I could use separate /boot primary partition, but can anybody tell me why it fails. Recipe and relevant options below. ## Partitioning using RAID d-i partman-auto/disk string /dev/sdb /dev/sdc d-i partman-auto/method string raid d-i partman-lvm/device_remove_lvm boolean true d-i partman-md/device_remove_md boolean true #d-i partman-lvm/confirm boolean true d-i partman-auto-lvm/new_vg_name string main_vg d-i partman-auto/expert_recipe string \ multiraid :: \ 100 512 -1 raid \ $lvmignore{ } \ $primary{ } \ method{ raid } \ . \ 256 512 256 ext3 \ $defaultignore{ } \ $lvmok{ } \ method{ format } \ format{ } \ use_filesystem{ } \ filesystem{ ext3 } \ mountpoint{ /boot } \ lv_name{ boot_lv } \ . \ 2000 5000 -1 ext4 \ $defaultignore{ } \ $lvmok{ } \ method{ format } \ format{ } \ use_filesystem{ } \ filesystem{ ext4 } \ mountpoint{ / } \ lv_name{ root_lv } \ . \ 64 512 300% linux-swap \ $defaultignore{ } \ $lvmok{ } \ method{ swap } \ format{ } \ lv_name{ swap_lv } \ . d-i partman-auto-raid/recipe string \ 1 2 0 lvm - \ /dev/sdb1#/dev/sdc1 \ . d-i mdadm/boot_degraded boolean true #d-i partman-md/confirm boolean true #d-i partman-partitioning/confirm_write_new_label boolean true #d-i partman/choose_partition select Finish partitioning and write changes to disk #d-i partman/confirm boolean true #d-i partman-md/confirm_nooverwrite boolean true #d-i partman/confirm_nooverwrite boolean true EDIT: After a bit of googling I found below snippet of code from partman-auto-lvm, but I still don't understand why would they prevent that setup if it's possible to do manually and booting from boot partition on LVM is possible. # Make sure a boot partition isn't marked as lvmok if echo "$scheme" | grep lvmok | grep -q "[[:space:]]/boot[[:space:]]"; then bail_out unusable_recipe fi

  Read the article

• Probelms Intstalling Trac using apt-get Ubuntu Jaunty

  - by Ben Waine

  Hi, I'm having some issues getting apt to install trac correctly on my Ubuntu Jaunty Box. Using the command 'apt-get install trac' I get the following output: root@myserver:~# apt-get install trac Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help to resolve the situation: The following packages have unmet dependencies: trac: Depends: python-setuptools (> 0.5) but it is not installable Depends: python-pysqlite2 (>= 2.3.2) but it is not going to be installed Depends: python-subversion but it is not installable Depends: libjs-jquery but it is not installable Recommends: python-pygments (= 0.6) but it is not installable or enscript but it is not installable Recommends: python-tz but it is not installable E: Broken packages I have successfully used the command on my karmic kola desktop machine and am able to create new projects etc. I thought I might be able to solve the problem by installing all python related extensions. This produced a very similar output. I have Main, universe and multi-verse repositories enabled. Its a remote machine and I have no access to the gui. Hope someone can help, googleing failed to solve the issue or find a solution! Thanks, Ben

  Read the article

• ISCSI Target Ubuntu

  - by erai

  I'm trying to setup iscsitarget on Ubuntu 12.04 but I can't connect to it. On the windows machine it says Target Error. with no other output. My ietd.conf is Target iqn.2012-06.com.org:virtual_machines.lun Lun 0 Type=fileio,Path=/media/volume0/storlun0.bin When I run iscsiadm -m discovery -t st -p localhost The output is iscsiadm: Connection to Discovery Address 127.0.0.1 failed iscsiadm: Login I/O error, failed to receive a PDU iscsiadm: retrying discovery login to 127.0.0.1 iscsiadm: Connection to Discovery Address 127.0.0.1 closed iscsiadm: Login I/O error, failed to receive a PDU iscsiadm: retrying discovery login to 127.0.0.1 iscsiadm: Connection to Discovery Address 127.0.0.1 failed iscsiadm: Login I/O error, failed to receive a PDU iscsiadm: retrying discovery login to 127.0.0.1 iscsiadm: Connection to Discovery Address 127.0.0.1 failed iscsiadm: Login I/O error, failed to receive a PDU iscsiadm: retrying discovery login to 127.0.0.1 iscsiadm: Connection to Discovery Address 127.0.0.1 failed iscsiadm: Login I/O error, failed to receive a PDU iscsiadm: retrying discovery login to 127.0.0.1 iscsiadm: connection login retries (reopen_max) 5 exceeded iscsiadm: Could not perform SendTargets discovery. dmesg output: [ 3324.804665] iscsi_trgt: Removing all connections, sessions and targets [ 3325.875343] iSCSI Enterprise Target Software - version 1.4.20.3 [ 3325.875415] iscsi_trgt: Registered io type fileio [ 3325.875420] iscsi_trgt: Registered io type blockio [ 3325.875425] iscsi_trgt: Registered io type nullio

  Read the article

• Apache & SVN on Ubuntu - Post-commit hook fails silently, pre-commit hook “Permission Denied”

  - by 113169587962668775787

  I've been struggling for the past couple days to get post-commit email notifications working on my SVN server (running via HTTP with Apache2 on Ubuntu 9.10). SVN commits work fine, but for some reason the hooks are not being properly executed. Here are the configuration settings: - Users access the repo via HTTP with the apache dav_svn module (I created users/passwords via htpasswd in a dav_svn.passwd file). dav_svn.conf: <Location /svn/repos> DAV svn SVNPath /home/svn/repos AuthType Basic AuthName "Subversion Repository" AuthUserFile /etc/apache2/dav_svn.passwd Require valid-user </Location> I created a post-commit hook file that writes a simple message to a file in the repository root: /home/svn/repos/hooks/post-commit: #!/bin/sh REPOS="$1" REV="$2" /bin/echo 'worked' > ${REPOS}/postcommit.log I set the entire repository to be owned by www-data (the apache user), and assigned 755 permissions to the post-commit script when I test the post-commit script using the www-data user in an empty environment, it works: sudo -u www-data env - /home/svn/repos/hooks/post-commit /home/svn/repos 7 But when I commit on a client machine, the commit is successful, but the post-commit script does not seem to be executed. I also tried running a simple script for the pre-commit hook, and I get an error, even with an empty pre-commit script: "Commit failed (details follow): Can't create null stdout for hook '/home/svn/repos/hooks/pre-commit': Permission denied" I did a few searches on Google for this error and I presume that this is an issue with the apache user (www-data) not having adequate permissions, specifically to execute /dev/null. I also read that the reason post-commit fails silently is because that it doesn't report with stdout. Anyway, I've also tried giving the apache user (www-data) ownership of the entire repository, and edited the apache virtualhost to allow operations on the server root, and I'm still getting permission denied /etc/apache2/sites-available/primarydomain.conf <Directory /> Options FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> Any ideas/suggestions would be greatly appreciated! Thanks

  Read the article

• custom listview adapter getView method being called multiple times, and in no coherent order

  - by edzillion

  I have a custom list adapter: class ResultsListAdapter extends ArrayAdapter<RecordItem> { in the overridden 'getView' method I do a print to check what position is and whether it is a convertView or not: @Override public View getView(int position, View convertView, ViewGroup parent) { System.out.println("getView " + position + " " + convertView); The output of this (when the list is first displayed, no user input as yet) 04-11 16:24:05.860: INFO/System.out(681): getView 0 null 04-11 16:24:29.020: INFO/System.out(681): getView 1 android.widget.RelativeLayout@43d415d8 04-11 16:25:48.070: INFO/System.out(681): getView 2 android.widget.RelativeLayout@43d415d8 04-11 16:25:49.110: INFO/System.out(681): getView 3 android.widget.RelativeLayout@43d415d8 04-11 16:25:49.710: INFO/System.out(681): getView 0 android.widget.RelativeLayout@43d415d8 04-11 16:25:50.251: INFO/System.out(681): getView 1 null 04-11 16:26:01.300: INFO/System.out(681): getView 2 null 04-11 16:26:02.020: INFO/System.out(681): getView 3 null 04-11 16:28:28.091: INFO/System.out(681): getView 0 null 04-11 16:37:46.180: INFO/System.out(681): getView 1 android.widget.RelativeLayout@43cff8f0 04-11 16:37:47.091: INFO/System.out(681): getView 2 android.widget.RelativeLayout@43cff8f0 04-11 16:37:47.730: INFO/System.out(681): getView 3 android.widget.RelativeLayout@43cff8f0 AFAIK, though I couldn't find it stated explicitly, getView() is only called for visible rows. Since my app starts with four visible rows at least the position numbers cycling from 0-3 makes sense. But the rest is a mess: Why is getview called for each row four times? Where are these convertViews coming from when I haven't scrolled yet? I did a bit of reseach, and without getting a good answer, I did notice that people were associating this issue with layout issues. So in case, here's the layout that contains the list: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_height="fill_parent" android:layout_width="fill_parent" android:orientation="vertical" > <TextView android:id="@+id/pageDetails" android:layout_width="fill_parent" android:layout_height="wrap_content" /> <ListView android:id="@+id/list" android:layout_width="fill_parent" android:layout_height="wrap_content" android:drawSelectorOnTop="false" /> </LinearLayout> and the layout of each individual row: <RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="fill_parent" android:layout_height="108dp" android:padding="4dp"> <ImageView android:id="@+id/thumb" android:layout_width="120dp" android:layout_height="fill_parent" android:layout_alignParentTop="true" android:layout_alignParentBottom="true" android:layout_alignParentLeft="true" android:layout_marginRight="8dp" android:src="@drawable/loading" /> <TextView android:id="@+id/price" android:layout_width="wrap_content" android:layout_height="18dp" android:layout_toRightOf="@id/thumb" android:layout_alignParentBottom="true" android:singleLine="true" /> <TextView android:id="@+id/date" android:layout_width="wrap_content" android:layout_height="18dp" android:layout_alignParentBottom="true" android:layout_alignParentRight="true" android:paddingRight="4dp" android:singleLine="true" /> <TextView android:id="@+id/title" android:layout_width="fill_parent" android:layout_height="wrap_content" android:textSize="17dp" android:layout_toRightOf="@id/thumb" android:layout_alignParentRight="true" android:layout_alignParentTop="true" android:paddingRight="4dp" android:layout_alignWithParentIfMissing="true" android:gravity="center" /> Thank you for your time

  Read the article

• Running SSL locally on a hosts redirected domain name with Ubuntu and Apache

  - by Matthew Brown

  I recently made some changes to my Ubuntu computer so that a domain name resolved to my local copy of Apache. I edited /etc/hosts and added 127.0.0.1 thisbit.example.com Then set up a VirtualHost for the responses I wishes to create. That all works fine and my testing is now shooting on ahead without harm or risk tot he production server. Now for my next trick I need to test the authentication and so need to do this with HTTPS Basically https://auth.example.com needs to work on my PC without the SSL causing an issue which I imagine would be the case as I am clearly not the true https://auth.example.com but for the basis of this exercise I need to pretend that I am. Now it might be that the Apps I'm testing don't worry about checking the certificate. (Many are in Java which I'm no expert with). What gotchas am I likely to encounter and what is the best way of not letting my own hacks spoil my testing? I'm guessing the place to start is to enable SSL with Apcahe... I've never done that before as it has never come up before.

  Read the article

• Ubuntu Postfix Gmail SMTP Relay Not Working

  - by Nick DeMayo

  I currently have postfix set up to relay messages from my websites through gmail, and up until recently it was working perfectly. However, within the last week or so (not really sure when) I started getting the below error whenever attempting to send an email: Jul 20 07:40:46 localhost postfix/smtp[11958]: connect to smtp.gmail.com[2001:4860:800a::6c]:587: Network is unreachable Jul 20 07:40:46 localhost postfix/smtp[11958]: connect to smtp.gmail.com[173.194.76.109]:587: Connection refused Jul 20 07:40:46 localhost postfix/smtp[11958]: connect to smtp.gmail.com[173.194.76.108]:587: Connection refused Here is my configuration file: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h #readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = [my domain name] alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases #myorigin = /etc/mailname mydestination = [my host name], localhost.localdomain, localhost relayhost = [smtp.gmail.com]:587 mynetworks = 127.0.0.0/8 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = loopback-only inet_protocols = all ########################################## ##### non debconf entries start here ##### ##### client TLS parameters ##### smtp_tls_loglevel=1 smtp_tls_security_level=encrypt smtp_sasl_auth_enable=yes smtp_sasl_password_maps=hash:/etc/postfix/sasl/passwd smtp_sasl_security_options = noanonymous ##### map username@localhost to [email protected] ##### smtp_generic_maps=hash:/etc/postfix/generic Nothing changed on my server, as far as I know...any ideas what could have caused it to stop working?

  Read the article

• Postfix installation error on Ubuntu

  - by kgpdeveloper

  How do I fix this error on Ubuntu 10.04 ? Reading package lists... Done Building dependency tree Reading state information... Done postfix is already the newest version. The following packages were automatically installed and are no longer required: libaprutil1-dbd-sqlite3 libcap2 apache2.2-bin libapr1 libaprutil1-ldap libaprutil1 php5-common Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. 1 not fully installed or removed. After this operation, 0B of additional disk space will be used. Setting up postfix (2.7.0-1) ... Postfix configuration was not changed. If you need to make changes, edit /etc/postfix/main.cf (and others) as needed. To view Postfix configuration values, see postconf(1). After modifying main.cf, be sure to run '/etc/init.d/postfix reload'. Running newaliases newaliases: warning: valid_hostname: numeric hostname: 202002 newaliases: fatal: file /etc/postfix/main.cf: parameter myhostname: bad parameter value: 202002 dpkg: error processing postfix (--configure): subprocess installed post-installation script returned error exit status 75 Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: postfix E: Sub-process /usr/bin/dpkg returned an error code (1) Even if I reboot, the same error shows up. Thanks for the help..

  Read the article

• How to add an SSH user to my Ubuntu 12 server to upload PHP files

  - by user229209

  I have an Ubuntu 12 VPS and wanted to create a user account to upload and download my PHP code. So when logged in as root I created a user "chris" and then created a directory /var/www/chris I want "chris" to be able to upload and run files to the /var/www/chris directory. Permissions for the chris dir look like this: drwxrwxr-x 2 root chris 4096 Aug 20 03:35 chris As root I created a sample file called abc.php and put it in the chris dir. It worked fine when I test it in a browser. I logged in as chris and uploaded a file called 1234.php. That did not work. I just got a blank PHP page. The code was identical in both files. So it is not the code. The permissions now look like this: -rw-r--r-- 1 root chris 59 Aug 20 03:34 1234.php -rw-r--r-- 1 root root 49 Aug 20 03:21 abc.php How do I alow the "chris" user to upload files and get them to work?

  Read the article

• Installing MySQL on Ubuntu Natty with Shell Script

  - by Obi Hill

  I'm trying to install MySQL on Ubuntu Natty from a shell script. However, I keep running into one major issue: when I try to define the password outside of the shell script. Below is the code to my shell script (which I have saved in /etc/init.d/install_mysql: export DEBIAN_FRONTEND=noninteractive echo mysql-server-5.1 mysql-server/root_password password $dbpass | debconf-set-selections echo mysql-server-5.1 mysql-server/root_password_again password $dbpass | debconf-set-selections apt-get -y install mysql-server So what I enter in the terminal is: dbpass="mysqlpass" chmod +x /etc/init.d/install_mysql /etc/init.d/install_mysql MySQL installs, but it installs without a password, so I can just do something like mysql -uroot to access mysql (which I don't want). The funny thing is if I put the password in the shell script as regular text, it works ok. So if I my install script is as follows, everything works (i.e. I must specify a password to access mysql): export DEBIAN_FRONTEND=noninteractive echo mysql-server-5.1 mysql-server/root_password password mysqlpass | debconf-set-selections echo mysql-server-5.1 mysql-server/root_password_again password mysqlpass | debconf-set-selections apt-get -y install mysql-server Is there a way I can use a shell script variable to define my password in the shell script, instead of entering the password literally?! Thanks in advance. EDIT I've found the answer to this. The following is what I should have entered in the terminal: dbpass="mysqlpass" export dbpass chmod +x /etc/init.d/install_mysql /etc/init.d/install_mysql It works like a charm now.

  Read the article

• Ubuntu 9.10 Only Sees 244 MB RAM, while BIOS and Windows Sees 1.5 GB

  - by nicorellius

  I have 1.5 GB of RAM installed on an older Dell, Pentium 4. I just installed Ubuntu 9.1 and the system is only seeing 244 MB of RAM, even though there is 1.5 GB on the system. The BIOS sees all of it. I ran a Knoppix disc and it only saw 25 MB upon booting. I made no particular changes to the installation taht would affect this. I looked through the BIOS and the only setting I could see was the AGP aperture. Not even sure what this is. Anyone know where I went wrong? I also tried moving the memory modules around on the board. Booted with the 1 GB stick, still saw 244 MB. NOTE - This same system, except for the hard drive, had Windows XP running on it. The user who ran it said that the RAM was good and always showed 1.5 GB. Here is sudo cat /proc/meminfo MemTotal: 250064 kB MemFree: 3832 kB Buffers: 13356 kB Cached: 52216 kB SwapCached: 19676 kB Active: 91504 kB Inactive: 113884 kB Active(anon): 60572 kB Inactive(anon): 82156 kB Active(file): 30932 kB Inactive(file): 31728 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 250064 kB LowFree: 3832 kB SwapTotal: 4883720 kB SwapFree: 4781204 kB Dirty: 496 kB Writeback: 720 kB AnonPages: 123796 kB Mapped: 23368 kB Slab: 17248 kB SReclaimable: 7932 kB SUnreclaim: 9316 kB PageTables: 5304 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 5008752 kB Committed_AS: 740372 kB VmallocTotal: 770600 kB VmallocUsed: 26008 kB VmallocChunk: 662544 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 114128 kB DirectMap4M: 147456 kB

  Read the article

• Ubuntu 12.04 - Pound Reverse Proxy and Adobe Flex/Flash Auth

  - by James

  First time posting, I have a completely fresh install of ubuntu 12.04 Client as a reverse proxy gateway to our internal network. Our setup is we have one external ip but three domains we would like to point to various webservers on our internal network. It's not so much a load balancing issue or cacheing etc. Merely routing some Client browsers to a port 80 webpage (to adhere to some stricter corporate policies regarding placing port numbers after domain names). I have gone with pound and everything seems to be working fine. Static pages load etc. Everything is good with the exception of a Flash/Flex based WebClient for a Digital Asset Management program. The actual static page loads fine, it is just at the moment of entering credentials, be they correct or incorrect, and hitting login, there is no response whatsoever. Either a rejection or confirmation etc. So the request back to the internal server can't be getting through. I have googled extensively and there might be a solution in a crossdomain.xml file? Documentation isn't very clear. And we are not the authors of the DAM app, and have no control over the code on the Flash/Flex side. Questions: Is there a particular config file/solution for pound that allows Flash/Flex auth information to be forwarded? Is there another reverse proxy program (nginx?)that allows this type of config? Am I looking at this the entire wrong way, should Flash/Flex fundamentally not be allowed to have this access?

  Read the article

• Ubuntu 12.4 compiz - disable all compiz plugin - empty screen

  - by gotqn

  A friend of mine has installed on my new machine Ubuntu 10.4 (I have always been windows user and have no experience with Linux). I started to watch some tutorial about how to make 'Rotated Cube' using 'Compiz',but the cube appears in the form of a list (only two slides). I have thought this could be result of my video cards (only two - one from the processor and one from the motherboard) and they can not support this options. Anyway, I have decided to disable all compiz plugins and options because my friend has set some, and I started to think there is some misunderstanding between the plugins. After, that I got only empty screen(no menu, no icons, anything) and can do nothing. How to fix this? EDIT: When I remove the compiz stuffs (from the console), the menu is shown again. Then I install the compiz again (some of the effect are still not working). After restart or log out/in the menu is hidden again. I suppose that there are some settings that I've broken but they are saved somewhere in the system and remove the compiz do not deleted them and as a result they are activated after compiz is installed again and the PC is restarted?

  Read the article

< Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >