Search Results

Search found 3452 results on 139 pages for 'ur truly friend'.

Page 134/139 | < Previous Page | 130 131 132 133 134 135 136 137 138 139  | Next Page >

  • PASS: Bylaw Changes

    - by Bill Graziano
    While you’re reading this, a post should be going up on the PASS blog on the plans to change our bylaws.  You should be able to find our old bylaws, our proposed bylaws and a red-lined version of the changes.  We plan to listen to feedback until March 31st.  At that point we’ll decide whether to vote on these changes or take other action. The executive summary is that we’re adding a restriction to prevent more than two people from the same company on the Board and eliminating the Board’s Officer Appointment Committee to have Officers directly elected by the Board.  This second change better matches how officer elections have been conducted in the past. The Gritty Details Our scope was to change bylaws to match how PASS actually works and tackle a limited set of issues.  Changing the bylaws is hard.  We’ve been working on these changes since the March board meeting last year.  At that meeting we met and talked through the issues we wanted to address.  In years past the Board has tried to come up with language and then we’ve discussed and negotiated to get to the result.  In March, we gave HQ guidance on what we wanted and asked them to come up with a starting point.  Hannes worked on building us an initial set of changes that we could work our way through.  Discussing changes like this over email is difficult wasn’t very productive.  We do a much better job on this at the in-person Board meetings.  Unfortunately there are only 2 or 3 of those a year. In August we met in Nashville and spent time discussing the changes.  That was also the day after we released the slate for the 2010 election. The discussion around that colored what we talked about in terms of these changes.  We talked very briefly at the Summit and again reviewed and revised the changes at the Board meeting in January.  This is the result of those changes and discussions. We made numerous small changes to clean up language and make wording more clear.  We also made two big changes. Director Employment Restrictions The first is that only two people from the same company can serve on the Board at the same time.  The actual language in section VI.3 reads: A maximum of two (2) Directors who are employed by, or who are joint owners or partners in, the same for-profit venture, company, organization, or other legal entity, may concurrently serve on the PASS Board of Directors at any time. The definition of “employed” is at the sole discretion of the Board. And what a mess this turns out to be in practice.  Our membership is a hodgepodge of interlocking relationships.  Let’s say three Board members get together and start a blog service for SQL Server bloggers.  It’s technically for-profit.  Let’s assume it makes $8 in the first year.  Does that trigger this clause?  (Technically yes.)  We had a horrible time trying to write language that covered everything.  All the sample bylaws that we found were just as vague as this. That led to the third clause in this section.  The first sentence reads: The Board of Directors reserves the right, strictly on a case-by-case basis, to overrule the requirements of Section VI.3 by majority decision for any single Director’s conflict of employment. We needed some way to handle the trivial issues and exercise some judgment.  It seems like a public vote is the best way.  This discloses the relationship and gets each Board member on record on the issue.   In practice I think this clause will rarely be used.  I think this entire section will only be invoked for actual employment issues and not for small side projects.  In either case we have the mechanisms in place to handle it in a public, transparent way. That’s the first and third clauses.  The second clause says that if your situation changes and you fall afoul of this restriction you need to notify the Board.  The clause further states that if this new job means a Board members violates the “two-per-company” rule the Board may request their resignation.  The Board can also  allow the person to continue serving with a majority vote.  I think this will also take some judgment.  Consider a person switching jobs that leads to three people from the same company.  I’m very likely to ask for someone to resign if all three are two weeks into a two year term.  I’m unlikely to ask anyone to resign if one is two weeks away from ending their term.  In either case, the decision will be a public vote that we can be held accountable for. One concern that was raised was whether this would affect someone choosing to accept a job.  I think that’s a choice for them to make.  PASS is clearly stating its intent that only two directors from any one organization should serve at any time.  Once these bylaws are approved, this policy should not come as a surprise to any potential or current Board members considering a job change.  This clause isn’t perfect.  The biggest hole is business relationships that aren’t defined above.  Let’s say that two employees from company “X” serve on the Board.  What happens if I accept a full-time consulting contract with that company?  Let’s assume I’m working directly for one of the two existing Board members.  That doesn’t violate section VI.3.  But I think it’s clearly the kind of relationship we’d like to prevent.  Unfortunately that was even harder to write than what we have now.  I fully expect that in the next revision of the bylaws we’ll address this.  It just didn’t make it into this one. Officer Elections The officer election process received a slightly different rewrite.  Our goal was to codify in the bylaws the actual process we used to elect the officers.  The officers are the President, Executive Vice-President (EVP) and Vice-President of Marketing.  The Immediate Past President (IPP) is also an officer but isn’t elected.  The IPP serves in that role for two years after completing their term as President.  We do that for continuity’s sake.  Some organizations have a President-elect that serves for one or two years.  The group that founded PASS chose to have an IPP. When I started on the Board, the Nominating Committee (NomCom) selected the slate for the at-large directors and the slate for the officers.  There was always one candidate for each officer position.  It wasn’t really an election so much as the NomCom decided who the next person would be for each officer position.  Behind the scenes the Board worked to select the best people for the role. In June 2009 that process was changed to bring it line with what actually happens.  An Officer Appointment Committee was created that was a subset of the Board.  That committee would take time to interview the candidates and present a slate to the Board for approval.  The majority vote of the Board would determine the officers for the next two years.  In practice the Board itself interviewed the candidates and conducted the elections.  That means it was time to change the bylaws again. Section VII.2 and VII.3 spell out the process used to select the officers.  We use the phrase “Officer Appointment” to separate it from the Director election but the end result is that the Board elects the officers.  Section VII.3 starts: Officers shall be appointed bi-annually by a majority of all the voting members of the Board of Directors. Everything else revolves around that sentence.  We use the word appoint but they truly are elected.  There are details in the bylaws for term limits, minimum requirements for President (1 prior term as an officer), tie breakers and filling vacancies. In practice we will have an election for President, then an election for EVP and then an election for VP Marketing.  That means that losing candidates will be able to fall down the ladder and run for the next open position.  Another point to note is that officers aren’t at-large directors.  That means if a current sitting officer loses all three elections they are off the Board.  Having Board member votes public will help with the transparency of this approach. This process has a number of positive and negatives.  The biggest concern I expect to hear is that our members don’t directly choose the officers.  I’m going to try and list all the positives and negatives of this approach. Many non-profits value continuity and are slower to change than a business.  On the plus side this promotes that.  On the negative side this promotes that.  If we change too slowly the members complain that we aren’t responsive.  If we change too quickly we make mistakes and fail at various things.  We’ve been criticized for both of those lately so I’m not entirely sure where to draw the line.  My rough assumption to this point is that we’re going too slow on governance and too quickly on becoming “more than a Summit.”  This approach creates competition in the officer elections.  If you are an at-large director there is no consequence to losing an election.  If you are an officer the only way to stay on the Board is to win an officer election or an at-large election.  If you are an officer and lose an election you can always run for the next office down.  This makes it very easy for multiple people to contest an election. There is value in a person moving through the officer positions up to the Presidency.  Having the Board select the officers promotes this.  The down side is that it takes a LOT of time to get to the Presidency.  We’ve had good people struggle with burnout.  We’ve had lots of discussion around this.  The process as we’ve described it here makes it possible for someone to move quickly through the ranks but doesn’t prevent people from working their way up through each role. We talked long and hard about having the officers elected by the members.  We had a self-imposed deadline to complete these changes prior to elections this summer. The other challenge was that our original goal was to make the bylaws reflect our actual process rather than create a new one.  I believe we accomplished this goal. We ran out of time to consider this option in the detail it needs.  Having member elections for officers needs a number of problems solved.  We would need a way for candidates to fall through the election.  This is what promotes competition.  Without this few people would risk an election and we’ll be back to one candidate per slot.  We need to do this without having multiple elections.  We may be able to copy what other organizations are doing but I was surprised at how little I could find on other organizations.  We also need a way for people that lose an officer election to win an at-large election.  Otherwise we’ll have very little competition for officers. This brings me to an area that I think we as a Board haven’t done a good job.  We haven’t built a strong process to tell you who is doing a good job and who isn’t.  This is a double-edged sword.  I don’t want to highlight Board members that are failing.  That’s not a good way to get people to volunteer and run for the Board.  But I also need a way let the members make an informed choice about who is doing a good job and would make a good officer.  Encouraging Board members to blog, publishing minutes and making votes public helps in that regard but isn’t the final answer.  I don’t know what the final answer is yet.  I do know that the Board members themselves are uniquely positioned to know which other Board members are doing good work.  They know who speaks up in meetings, who works to build consensus, who has good ideas and who works with the members.  What I Could Do Better I’ve learned a lot writing this about how we communicated with our members.  The next time we revise the bylaws I’d do a few things differently.  The biggest change would be to provide better documentation.  The March 2009 minutes provide a very detailed look into what changes we wanted to make to the bylaws.  Looking back, I’m a little surprised at how closely they matched our final changes and covered the various arguments.  If you just read those you’d get 90% of what we eventually changed.  Nearly everything else was just details around implementation.  I’d also consider publishing a scope document defining exactly what we were doing any why.  I think it really helped that we had a limited, defined goal in mind.  I don’t think we did a good job communicating that goal outside the meeting minutes though. That said, I wish I’d blogged more after the August and January meeting.  I think it would have helped more people to know that this change was coming and to be ready for it. Conclusion These changes address two big concerns that the Board had.  First, it prevents a single organization from dominating the Board.  Second, it codifies and clearly spells out how officers are elected.  This is the process that was previously followed but it was somewhat murky.  These changes bring clarity to this and clearly explain the process the Board will follow. We’re going to listen to feedback until March 31st.  At that time we’ll decide whether to approve these changes.  I’m also assuming that we’ll start another round of changes in the next year or two.  Are there other issues in the bylaws that we should tackle in the future?

    Read the article

  • Project Management Helps AmeriCares Deliver International Aid

    - by Sylvie MacKenzie, PMP
    Excerpt from PROFIT - ORACLE - by Alison Weiss Handle with Care Sound project management helps AmeriCares bring international aid to those in need. The stakes are always high for AmeriCares. On a mission to restore health and save lives during times of disaster, the nonprofit international relief and humanitarian aid organization delivers donated medicines, medical supplies, and humanitarian aid to people in the U.S. and around the globe. Founded in 1982 with the express mission of responding as quickly and efficiently as possible to help people in need, the Stamford, Connecticut-based AmeriCares has delivered more than US$10.5 billion in aid to 147 countries over the past three decades. Launch the Slideshow “It’s critically important to us that we steward all the donations and that the medical supplies and medicines get to people as quickly as possible with no loss,” says Kate Sears, senior vice president for finance and technology at AmeriCares. “Whether we’re shipping IV solutions to victims of cholera in Haiti or antibiotics to Somali famine victims, we need to get the medicines there sooner because it means more people will be helped and lives improved or even saved.” Ten years ago, the tracking systems used by AmeriCares associates were paper-based. In recent years, staff started using spreadsheets, but the tracking processes were not standardized between teams. “Every team was tracking completely different information,” says Megan McDermott, senior associate, Sub-Saharan Africa partnerships, at AmeriCares. “It was just a few key things. For example, we tracked the date a shipment was supposed to arrive and the date we got reports from our partner that a hospital received aid on their end.” While the data was accurate, much detail was being lost in the process. AmeriCares management knew it could do a better job of tracking this enterprise data and in 2011 took a significant step by implementing Oracle’s Primavera P6 Professional Project Management. “It’s a comprehensive solution that has helped us improve the monitoring and controlling processes. It has allowed us to do our distribution better,” says Sears. In addition, the implementation effort has been a change agent, helping AmeriCares leadership rethink project management across the entire organization. Initially, much of the focus was on standardizing processes, but staff members also learned the importance of thinking proactively to prevent possible problems and evaluating results to determine if goals and objectives are truly being met. Such data about process efficiency and overall results is critical not only to AmeriCares staff but also to the donors supporting the organization’s life-saving missions. Efficiency Saves Lives One of AmeriCares’ core operations is to gather product donations from the private sector, establish where the most-urgent needs are, and solicit monetary support to send the aid via ocean cargo or airlift to welfare- and health-oriented nongovernmental organizations, hospitals, health networks, and government ministries based in areas in need. In 2011 alone, AmeriCares sent more than 3,500 shipments to 95 countries in response to both ongoing humanitarian needs and more than two dozen emergencies, including deadly tornadoes and storms in the U.S. and the devastating tsunami in Japan. When it comes to nonprofits in general, donors want to know that the charitable organizations they support are using funds wisely. Typically, nonprofits are evaluated by donors in terms of efficiency, an area where AmeriCares has an excellent reputation: 98 percent of expenses go directly to supporting programs and less than 2 percent represent administrative and fundraising costs. Donors, however, should look at more than simple efficiency, says Peter York, senior partner and chief research and learning officer at TCC Group, a nonprofit consultancy headquartered in New York, New York. They should also look at whether organizations have the systems in place to sustain their missions and continue to thrive. An expert on nonprofit organizational management, York has spent years studying sustainable charitable organizations. He defines them as nonprofits that are able to achieve the ongoing financial support to stay relevant and continue doing core mission work. In his analysis of well over 2,500 larger nonprofits, York has found that many are not sustaining, and are actually scaling back in size. “One of the biggest challenges of nonprofit sustainability is the general public’s perception that every dollar donated has to go only to the delivery of service,” says York. “What our data shows is that there are some fundamental capacities that have to be there in order for organizations to sustain and grow.” York’s research highlights the importance of data-driven leadership at successful nonprofits. “You’ve got to have the tools, the systems, and the technologies to get objective information on what you do, the people you serve, and the results you’re achieving,” says York. “If leaders don’t have the knowledge and the data, they can’t make the strategic decisions about programs to take organizations to the next level.” Historically, AmeriCares associates have used time-tested and cost-effective strategies to ship and then track supplies from donation to delivery to their destinations in designated time frames. When disaster strikes, AmeriCares ships by air and generally pulls out all the stops to deliver the most urgently needed aid within the first few days and weeks. Then, as situations stabilize, AmeriCares turns to delivering sea containers for the postemergency and ongoing aid so often needed over the long term. According to McDermott, getting a shipment out the door is fairly complicated, requiring as many as five different AmeriCares teams collaborating together. The entire process can take months—from when products are received in the warehouse and deciding which recipients to allocate supplies to, to getting customs and governmental approvals in place, actually shipping products, and finally ensuring that the products are received in-country. Delivering that aid is no small affair. “Our volume exceeds half a billion dollars a year worth of donated medicines and medical supplies, so it’s a sizable logistical operation to bring these products in and get them out to the right place quickly to have the most impact,” says Sears. “We really pride ourselves on our controls and efficiencies.” Adding to that complexity is the fact that the longer it takes to deliver aid, the more dire the human need can be. Any time AmeriCares associates can shave off the complicated aid delivery process can translate into lives saved. “It’s really being able to track information consistently that will help us to see where are the bottlenecks and where can we work on improving our processes,” says McDermott. Setting a Standard Productivity and information management improvements were key objectives for AmeriCares when staff began the process of implementing Oracle’s Primavera solution. But before configuring the software, the staff needed to take the time to analyze the systems already in place. According to Greg Loop, manager of database systems at AmeriCares, the organization received guidance from several consultants, including Rich D’Addario, consulting project manager in the Primavera Global Business Unit at Oracle, who was instrumental in shepherding the critical requirements-gathering phase. D’Addario encouraged staff to begin documenting shipping processes by considering the order in which activities occur and which ones are dependent on others to get accomplished. This exercise helped everyone realize that to be more efficient, they needed to keep track of shipments in a more standard way. “The staff didn’t recognize formal project management methodology,” says D’Addario. “But they did understand what the most important things are and that if they go wrong, an entire project can go off course.” Before, if a boatload of supplies was being sent to Haiti and there was a problem somewhere, a lot of time was taken up finding out where the problem was—because staff was not tracking things in a standard way. As a result, even more time was needed to find possible solutions to the problem and alert recipients that the aid might be delayed. “For everyone to put on the project manager hat and standardize the way every single thing is done means that now the whole organization is on the same page as to what needs to occur from the time a hurricane hits Haiti and when a boat pulls in to unload supplies,” says D’Addario. With so much care taken to put a process foundation firmly in place, configuring the Primavera solution was actually quite simple. Specific templates were set up for different types of shipments, and dashboards were implemented to provide executives with clear overviews of every project in the system. AmeriCares’ Loop reports that system planning, refining, and testing, followed by writing up documentation and training, took approximately four months. The system went live in spring 2011 at AmeriCares’ Connecticut headquarters. While the nonprofit has an international presence, with warehouses in Europe and offices in Haiti, India, Japan, and Sri Lanka, most donated medicines come from U.S. entities and are shipped from the U.S. out to the rest of the world. In addition, all shipments are tracked from the U.S. office. AmeriCares doesn’t expect the Primavera system to take months off the shipping time, especially for sea containers. However, any time saved is still important because it will allow aid to be delivered to people more quickly at a lower overall cost. “If we can trim a day or two here or there, that can translate into lives that we’re saving, especially in emergency situations,” says Sears. A Cultural Change Beyond the measurable benefits that come with IT-driven process improvement, AmeriCares management is seeing a change in culture as a result of the Primavera project. One change has been treating every shipment of aid as a project, and everyone involved with facilitating shipments as a project manager. “This is a revolutionary concept for us,” says McDermott. “Before, we were used to thinking we were doing logistics—getting a container from point A to point B without looking at it as one project and really understanding what it meant to manage it.” AmeriCares staff is also happy to report that collaboration within the organization is much more efficient. When someone creates a shipment in the Primavera system, the same shared template is used, which means anyone can log in to the system to see the status of a shipment. Knowledgeable staff can access a shipment project to help troubleshoot a problem. Management can easily check the status of projects across the organization. “Dashboards are really useful,” says McDermott. “Instead of going into the details of each project, you can just see the high-level real-time information at a glance.” The new system is helping team members focus on proactively managing shipments rather than simply reacting when problems occur. For example, when a container is shipped, documents must be included for customs clearance. Now, the shipping template has built-in reminders to prompt team members to ask for copies of these documents from freight forwarders and to follow up with partners to discover if a shipment is on time. In the past, staff may not have worked on securing these documents until they’d been notified a shipment had arrived in-country. Another benefit of capturing and adopting best practices within the Primavera system is that staff training is easier. “Capturing the processes in documented steps and milestones allows us to teach new staff members how to do their jobs faster,” says Sears. “It provides them with the knowledge of their predecessors so they don’t have to keep reinventing the wheel.” With the Primavera system already generating positive results, management is eager to take advantage of advanced capabilities. Loop is working on integrating the company’s proprietary inventory management system with the Primavera system so that when logistics or warehousing operators input data, the information will automatically go into the Primavera system. In the past, this information had to be manually keyed into spreadsheets, often leading to errors. Mining Historical Data Another feature on the horizon for AmeriCares is utilizing Primavera P6 Professional Project Management reporting capabilities. As the system begins to include more historical data, management soon will be able to draw on this information to conduct analysis that has not been possible before and create customized reports. For example, at the beginning of the shipment process, staff will be able to use historical data to more accurately estimate how long the approval process should take for a particular country. This could help ensure that food and medicine with limited shelf lives do not get stuck in customs or used beyond their expiration dates. The historical data in the Primavera system will also help AmeriCares with better planning year to year. The nonprofit’s staff has always put together a plan at the beginning of the year, but this has been very challenging simply because it is impossible to predict disasters. Now, management will be able to look at historical data and see trends and statistics as they set current objectives and prepare for future need. In addition, this historical data will provide AmeriCares management with the ability to review year-end data and compare actual project results with goals set at the beginning of the year—to see if desired outcomes were achieved and if there are areas that need improvement. It’s this type of information that is so valuable to donors. And, according to York, project management software can play a critical role in generating the data to help nonprofits sustain and grow. “It is important to invest in systems to help replicate, expand, and deliver services,” says York. “Project management software can help because it encourages nonprofits to examine program or service changes and how to manage moving forward.” Sears believes that AmeriCares donors will support the return on investment the organization will achieve with the Primavera solution. “It won’t be financial returns, but rather how many more people we can help for a given dollar or how much more quickly we can respond to a need,” says Sears. “I think donors are receptive to such arguments.” And for AmeriCares, it is all about the future and increasing results. The project management environment currently may be quite simple, but IT staff plans to expand the complexity and functionality as the organization grows in its knowledge of project management and the goals it wants to achieve. “As we use the system over time, we’ll continue to refine our best practices and accumulate more data,” says Sears. “It will advance our ability to make better data-driven decisions.”

    Read the article

  • CodePlex Daily Summary for Thursday, October 11, 2012

    CodePlex Daily Summary for Thursday, October 11, 2012Popular ReleasesOstrivDB: OstrivDB 0.1: - Storage configuration: objects serialization (Xml, Json), storage file compressing, data block size. - Caching for Select queries. - Indexing. - Batch of queries. - No special query language (LINQ used). - Integrated sorting and paging. - Multithreaded data processing.Mido: Mido v0.7: Mido is the simplest utility that helps to make watermarks on images and resize them. It has a very thin installer. The program has beta mark but it is able to draw watermark text, watermark images, resize pictures. Change list: + Opacity option + Stroke option + Bold, italic, underline options + Show progress during loading of images + Allow rotate watermart + Allow write multiline text as watermark + Add text aligment if text contains several lines + Add button 'clear custom position' + A...D3 Loot Tracker: 1.5.4: Fixed a bug where the server ip was not logged properly in the stats file.Captcha MVC: Captcha Mvc 2.1.2: v 2.1.2: Fixed problem with serialization. Made all classes from a namespace Jetbrains.Annotaions as the internal. Added autocomplete attribute and autocorrect attribute for captcha input element. Minor changes. v 2.1.1: Fixed problem with serialization. Minor changes. v 2.1: Added support for storing captcha in the session or cookie. See the updated example. Updated example. Minor changes. v 2.0.1: Added support for a partial captcha. Now you can easily customize the layout, s...DotNetNuke® Community Edition CMS: 06.02.04: Major Highlights Fixed issue where the module printing function was only visible to administrators Fixed issue where pane level skinning was being assigned to a default container for any content pane Fixed issue when using password aging and FB / Google authentication Fixed issue that was causing the DateEditControl to not load the assigned value Fixed issue that stopped additional profile properties to be displayed in the member directory after modifying the template Fixed er...Advanced DataGridView with Excel-like auto filter: 1.0.0.0: ?????? ??????Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.69: Fix for issue #18766: build task should not build the output if it's newer than all the input files. Fix for Issue #18764: build taks -res switch not working. update build task to concatenate input source and then minify, rather than minify and then concatenate. include resource string-replacement root name in the assumed globals list. Stop replacing new Date().getTime() with +new Date -- the latter is smaller, but turns out it executes up to 45% slower. add CSS support for single-...WinRT XAML Toolkit: WinRT XAML Toolkit - 1.3.3: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features Attachable Behaviors AwaitableUI extensions Controls Converters Debugging helpers Extension methods Imaging helpers IO helpers VisualTree helpers Samples Recent changes NOTE:...VidCoder: 1.4.4 Beta: Fixed inability to create new presets with "Save As".MCEBuddy 2.x: MCEBuddy 2.3.2: Changelog for 2.3.2 (32bit and 64bit) 1. Added support for generating XBMC XML NFO files for files in the conversion queue (store it along with the source video with source video name.nfo). Right click on the file in queue and select generate XML 2. UI bugifx, start and end trim box locations interchanged 3. Added support for removing commercials from non DVRMS/WTV files (MP4, AVI etc) 4. Now checking for Firewall port status before enabling (might help with some firewall problems) 5. User In...Sandcastle Help File Builder: SHFB v1.9.5.0 with Visual Studio Package: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release supports the Sandcastle October 2012 Release (v2.7.1.0). It includes full support for generating, installing, and removing MS Help Viewer files. This new release suppor...ClosedXML - The easy way to OpenXML: ClosedXML 0.68.0: ClosedXML now resolves formulas! Yes it finally happened. If you call cell.Value and it has a formula the library will try to evaluate the formula and give you the result. For example: var wb = new XLWorkbook(); var ws = wb.AddWorksheet("Sheet1"); ws.Cell("A1").SetValue(1).CellBelow().SetValue(1); ws.Cell("B1").SetValue(1).CellBelow().SetValue(1); ws.Cell("C1").FormulaA1 = "\"The total value is: \" & SUM(A1:B2)"; var...Json.NET: Json.NET 4.5 Release 10: New feature - Added Portable build to NuGet package New feature - Added GetValue and TryGetValue with StringComparison to JObject Change - Improved duplicate object reference id error message Fix - Fixed error when comparing empty JObjects Fix - Fixed SecAnnotate warnings Fix - Fixed error when comparing DateTime JValue with a DateTimeOffset JValue Fix - Fixed serializer sometimes not using DateParseHandling setting Fix - Fixed error in JsonWriter.WriteToken when writing a DateT...Readable Passphrase Generator: KeePass Plugin 0.7.2: Changes: Tested against KeePass 2.20.1 Tested under Ubuntu 12.10 (and KeePass 2.20) Added GenerateAsUtf8 method returning the encrypted passphrase as a UTF8 byte array.TelerikMvcGridCustomBindingHelper: Version 1.0.15.279-RC3: TelerikMvcGridCustomBindingHelper 1.0.15.279 RC3 Release notes: This is a RC version (hopefully the last one), please test and report any error or problem you encounter. Configurable null handling when filtering (AcceptNullValuesWhenFiltering, NullSubstitutes and NullAliases) Internal DynamicWhereClause improvments GridGridCustomBindingHelper.UseProjections method now acept ProjectionsOptions parameter for easely determine which properties should be projected Isolate and hide some are...JSLint for Visual Studio 2010: 1.4.2: 1.4.2patterns & practices: Prism: Prism for .NET 4.5: This is a release does not include any functionality changes over Prism 4.1 Desktop. These assemblies target .NET 4.5. These assemblies also were compiled against updated dependencies: Unity 3.0 and Common Service Locator (Portable Class Library).Snoop, the WPF Spy Utility: Snoop 2.8.0: Snoop 2.8.0Announcing Snoop 2.8.0! It's been exactly six months since the last release, and this one has a bunch of goodies in it. In particular, there is now a PowerShell scripting tab, compliments of Bailey Ling. With this tab, the possibilities are limitless. It basically lets you automate/script the application that you are Snooping. Bailey has a couple blog posts (one and two) on his tab already, and I am sure more is to come. Please note that if you do not have PowerShell installed, y...Z3: Z3 4.1.2: Minor fixes. Now, z3 compiles with gcc 4.7.x.NET Micro Framework: .NET MF 4.3 (Beta): This is the 4.3 Beta version of the .NET Micro Framework. Feature List for v4.3 Support for Visual Studio 2012 (including the Windows Desktop Express version) All v4.2 QFEs features and bug fixes (PWM enhancements, lwIP and network driver reliability improvements, Analog Output, WinUSB and latest GCC support) Improved diagnostic information for deployment Decreased boot time Bug fixes Work Item 1736 - Create link for MFDeploy under start menu Work Item 1504 - Customizing lwIP o...New Projects.NET 4.0 Object/Function DLL interface: A Visual Basic .NET 4.0 Object / Function interface for quick and easy updating.AzureDirectory Library for Lucene.Net: This project allows you to create Lucene Indexes via a Lucene Directory object which uses Windows Azure BlobStorage for persistent storage.Building Modern Mobile Web Apps: This project provides guidance on building mobile web experiences using HTML5, CSS3, and JavaScript. Developing web apps for mobile browsers can be less forgiviC# Singleton Base-Class: C# Singleton Base Class is a single, simple C# class used to implement the Singleton pattern through inheritance.C++ Unit Test Library for Windows Store apps with Async Helper: This Visual Studio extension will install a project template for C++ Unit Test Library for Windows Store apps that contains async helper.Citrix Mobile Application SDK Samples: This site contains our latest prototype samples for the Citrix Mobile Application SDK for you to play with.eBrain Engine: eBrain Engine is a software to administer neuropsychological tests by means of advanced I/F devices like BCI P300 and eye-tracking systemsFairycake: A game about a little witch. Java. FedEx Connector for AbleCommerce Gold: This plugin provides FedEx rating and tracking services for the AbleCommerce shopping cart.Free - Simple Phone Book (SimPB): An alternative to backup your telephone contacts. Portable, easy to use, multilingual.GPXLocalTime2UTC: Time Format Converter, from Local to UTC, for GPX Files A small utility made to open GPX files (XML), search for the "time" tag, then transform the local time Grid Solutions Framework: Core classes to manage, analyze, and visualize real-time and historical data. This project combines the time-series framework and TVA code library projects.HireMe: HireMe is a HR application that works in conjunction with the HiremeMagazine.com website. The app will run in Android, iOS and WebOS.my-sim-asdf: my greate toolOdeToFoodMvc4: Source code for "Building Applications with ASP.NET MVC 4"OrgCharts for SharePoint: Months of planning, design, development and testing have gone into a truly phenomenal Org Chart experiencePDC BW2: A pkm editor application that tries to make easier legal pkm Packed with Legality Analysis, Event downloader and more...PI Payroll system: This is a payroll system for People Index, LLC.Project13251011: fsdQuickWick.NET - Agile Pproject Management: QuickWick.NET is a simple and effective web-based solution for agile project management.SharePoint 2010 Top Nav: This project was created when a project I was on required a Navigation scheme to manage site collections. SisGAC: Sistema de Gerenciamento de Artigos para CongressosTriDes_project_3AO: encryptohideVB6Doc: Visual Basic 6 Documentor (VB6 Doc)VideoChat: Simple VideoChat web-application on ASP.NET MVC4, SignalR, Wowza Media Server/Windows Updater Open: This is an alternative to the Windows Update software on all versions of Windows OS and the WSUS provided for corporations to update multiple machines.WOWAddonsUpdater: WPF App to update lua addons for the Blizzard World of warcraft gameyygua: email:huliang@yahoo.cnZJUDTS2: ????Silverlight?????????

    Read the article

  • OS Missing? Messed up the MBR on Win7 64-bit

    - by hom3lesshom3boy
    I have a Windows 7 machine with two hard drives: a 1TB C: drive and 500GB J:. I had Windows XP installed on C: and Windows 7 installed on J:. I installed Windows 7 after Windows XP from an installer .exe I (legally) bought and downloaded. It, and all of my other files, are sitting on my J: drive intact. While under my Windows 7 install, a few days ago I decided to use Priform's CCleaner and use its DriveWipe utility to wipe the C: drive. 1% into the process, I cancelled and attempted to use it again. It gives me an error saying it can't format the drive, so I poke around the Internet a bit, give up, and restart my computer. I first get an "OS is missing" error after the computer boots past the BIOS. I downloaded and put UBCD on a bootable USB to use another drivewiping tool to completely erase the C: drive, hoping it'll take the problem with it. No luck. I try to use TestDisk to make my J: my primary active drive, but no luck. I still get the "OS is missing" error. Or sometimes it'll hang at Verifying DMI Pool. Or sometimes I'll get the "NTLDR is missing" error. I get hold of Hiren's and put it on another bootable USB. I first I tried the Boot Windows 7 from Hard Drive option, and I get "Error 15: File Not Found". I tried the "Fix 'NTLDR is Missing'" option (I'm not quite sure why this is even showing up, since I'm trying to get into a HDD with Windows 7 installed. Probably messed up somewhere when I used TestDisk) and I get this list: I'll run through the error messages I get: 1st Try - Windows could not start because the following file is missing or corrupt: \system32\hal.dll 2nd Try - Windows could not start because the following file is missing or corrupt: \system32\ntoskrnl.exe 3rd Try - Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware. 4th - 8th Try - Same as #3 9th Try - I/O Error accessing boot sector file multi(0)disk(0)fdisk(0)\BOOTSEC.DOS. And computer freezes. 10th Try - computer restarts Needless to say, not a single one of those works. I then tried to open up the Windows 7 exe I have sitting on my J: from the Mini-XP OS on Hiren's, but it won't run because I'm trying to run a 64-bit file from a 32-bit exe. At least, that's the problem according to these guys: http://social.technet.microsoft.com/...-b2f54e9c7d18/ I then borrowed a 64-bit Windows Home Premium CD from a friend to get to the recovery options. But I get the error message: This version of System Recovery Options is not compatible with the version of Windows you are trying to repair. Try using a recovery disc that is compatible with this version of Windows. I pressed Shift + F10 to get to the Command Prompt directly. These are the exact steps I took from there (paraphrased a little): X:\Sources>bootrec /Fixmbr The operation completed successfully. X:\Sources>bootrec /Fixboot The operation completed successfully. I restarted my computer, but it still didn't work. I unplugged the C: drive, then tried bootrec and Diskpart: X:\Sources> bootrec.exe X:\Sources> bootrec /RebuildBcd Total identified Windows installations: 1 [1] \\?\GLOBALROOT\Device\HarddiskVolume1\Windows Add installation to bootlist? Yes(Y)/No(N)/All(A):y The requested system device cannot be found. X:\Sources>DiskPart DISKPART> List Disk Disk # Status Size Free Dyn Gpt Disk 0_Online_465GB_0B_______* Disk 1 Online 1000MB 0B (this is Hiren's on a bootable usb) DISKPART> Select Disk 0 Disk 0 is now the selected disk. DISKPART> List Partition Partition # Type Size Offset Partition 1 System 465GB 31KB DISKPART> Select Partition 1 Partition 1 is now the selected partition DISKPART> Active The selected disk is not a fixed MBR disk. The ACTIVE command can only be used on fixed MBR disks. DISKPART> exit Leaving Diskpart... X:\Sources>bootrec /Fixmbr The operation completed successfully. X:\Sources>bootrec /Fixboot The operation completed successfully. Before I go any further, is there anything I'm overlooking/doing wrong? All I care about is making the J: and Windows 7 bootable again. SPECS: Windows 7 Professional 64-Bit GIGABYTE - Motherboard - Socket 775 - GA-P35-DS3R (rev. 2.1) Crucial Ballistix 2048MB PC6400 DDR2 800MHz (2x2GB) Intel Core 2 Duo E6700 Processor (2.6 (6GHZ) I think... not sure anymore C: HDD - SAMSUNG HD103UJ (1TB, not plugged in) J: HDD - WDC WD5000AKS-00V1A0 (500GB)

    Read the article

  • WPF Styles and Tooltips Question

    - by A.R.
    I have a style that I am using to make dynamic tooltips on certain text boxes like so. <Style TargetType="{x:Type TextBox}"> <Setter Property="MinWidth" Value="100"/> <Style.Triggers> <Trigger Property="Validation.HasError" Value="True"> <!-- item of interest --> <Setter Property="ToolTip"> <Setter.Value> <MultiBinding Converter="{StaticResource ErrorMessageConverter}"> <Binding RelativeSource="{RelativeSource Self}" Path="Tag"/> </MultiBinding> </Setter.Value> </Setter> </Trigger> </Style.Triggers> </Style> This works very well, but if I want to use a more complex tooltip I can't figure out how to bind to 'Tag' anymore for the converter value. For example; ... <Setter Property="ToolTip"> <Setter.Value> <StackPanel> <TextBlock> <TextBlock.Text> <MultiBinding Converter="{StaticResource ErrorMessageConverter}"> <!-- item of interest --> <Binding RelativeSource=" what goes here?? "/> </MultiBinding> </TextBlock.Text> </TextBlock> <Image/> </StackPanel> </Setter.Value> </Setter> ... I have tried several flavors of 'FindAncestor' and what not for the relative source, but I can't get anything to work. Any ideas?? UPDATE: 12-29-2010 : Here is the correct code, answer provided by our friend Goblin below. Works perfectly! ... <Setter Property="ToolTip"> <Setter.Value> <!-- Item of interest --> <ToolTip DataContext="{Binding Path=PlacementTarget, RelativeSource={x:Static RelativeSource.Self}}"> <StackPanel> <Image/> <TextBlock> <TextBlock.Text> <MultiBinding Converter="{StaticResource ErrorMessageConverter}"> <Binding Path="Tag"/> </MultiBinding> </TextBlock.Text> </TextBlock> </StackPanel> </ToolTip> </Setter.Value> </Setter> ...

    Read the article

  • Mercurial hg clone on Windows via ssh with copSSH issue

    - by Kyle Tolle
    I have a Windows Server 2008 machine (iis7) that has CopSSH set up on it. To connect to it, I have a Windows 7 machine with Mercurial 1.5.1 (and TortoiseHg) installed. I can connect to the server using PuTTY with a non-standard ssh port and a .ppk file just fine. So I know the server can be SSH'd into. Next, I wanted to use the CLI to connect via hg clone to get a private repo. I've seen elsewhere that you need to have ssh configured in your mercurial.ini file, so my mercurial.ini has a line: ssh = plink.exe -ssh -C -l username -P #### -i "C:/Program Files/PuTTY/Key Files/KyleKey.ppk" Note: username is filled in with the username I set up via copSSH. #### is filled in with the non-standard ssh port I've defined for copSSH. I try to do the command hg clone ssh://inthom.com but I get this error: remote: bash: inthom.com: command not found abort: no suitable response from remote hg! It looks like hg or plink parses the hostname such that it thinks that inthom.com is a command instead of the server to ssh to. That's really odd. Next, I tried to just use plink to connect by plink -P #### ssh://inthom.com, and I am then prompted for my username, and next password. I enter them both and then I get this error: bash: ssh://inthom.com: No such file or directory So now it looks like plink doesn't parse the hostname correctly. I fiddled around for a while trying to figure out how to do call hg clone with an empty ssh:// field and eventually figured out that this command allows me to reach the server and clone a test repo on the inthom.com server: hg clone ssh://!/Repos/test ! is the character I've found that let's me leave the hostname blank, but specify the repo folder to clone. What I really don't understand is how plink knows what server to ssh to at all. neither my mercurial.ini nor the command specify a server. None of the hg clone examples I've seen have a ! character. They all use an address, which makes sense, so you can connect to any repo via ssh that you want to clone. My only guess is that it somehow defaults to the last server I used PuTTY to SSH to, but I SSH'd into another server, and then tried to use plink to get to it, but plink still defaults to inthom.com (verified with the -v arg to plink). So I am at a loss as to how plink gets this server value at all. For "fun", I tried using TortoiseHg and can only clone a repo when I use ssh://!/Repos/test as the Source. Now, you can see that, since plink doesn't parse the hostname correctly, I had to specify the port number and username in the mercurial.ini file, instead of in the hostname like [email protected]:#### like you'd expect to. Trying to figure this out at first drove me insane, because I would get errors that the host couldn't be reached, which I knew shouldn't be the case. My question is how can I configure my setup so that ssh://[email protected]:####/Repos/test is parsed correctly as the username, hostname, port number, and repo to copy? Is it something wrong with the version of plink that I'm using, or is there some setting I may have messed up? If it is plink's fault, is there an alternative tool I can use? I'm going to try to get my friend set up to connect to this same repo, so I'd like to have a clean solution instead of this ! business. Especially when I have no idea how plink gets this default server, so I'm not sure if he'd even be able to get to inthom.com correctly. PS. I've had to use a ton of different tutorials to even get to this stage. Therefore, I haven't tried pushing any changes to the server yet. Hopefully I'll get this figured out and then I can try pushing changes to the repo.

    Read the article

  • Getting RINGING response on SIP UAC without sending it from the other UAC

    - by TacB0sS
    Hi, I hope this would be my last question about this SIP subject, I have managed to overcome the last issue I had by asking a friend to help me from a remote computer, I'm able to connect between the computers, but here is the thing, according to all the examples I saw, the Callee should invoke the Ringing response, but in my application case I didn't implement it yet, but I still receive on the Caller UAC a Ringing response, this is the SIP messages that are on the caller end: Outgoing Request 5: INVITE sip:[email protected] SIP/2.0 Contact: "Client 310" <sip:[email protected]> From: "Client 310" <sip:[email protected]> Max-Forwards: 32 CSeq: 2 INVITE Call-ID: [email protected] Allow: INVITE,CANCEL,ACK,BYE,OPTIONS Content-Type: application/sdp Proxy-Authorization: Digest username="310",nonce="012afffb",realm="asterisk",uri="sip:[email protected]",algorithm=MD5,response="d19ca5b98450b4be7bd4045edb8a3a2f" Via: SIP/2.0/UDP hostName.hn:5060 To: "Client 320" <sip:[email protected]>;tag=as5a8fa200 Content-Length: 257 v=0 o=310 7108915969559970847 7108915969559970847 IN IP4 xxx.xxx.x.xxx s=- i=Nu-Art Software - TacB0sS VoIP information c=IN IP4 xxx.xxx.x.xxx m=audio 3312 RTP/AVP 0 8 101 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 Incoming Response 6: SIP/2.0 100 Trying Via: SIP/2.0/UDP hostName.hn:5060;branch=f8d171d3278788df9e03eb9cf3acba70-xxx.xxx.x.xxx-2-invite-hostName.hn-5060333732;received=79.181.6.233 From: "Client 310" <sip:[email protected]> To: "Client 320" <sip:[email protected]>;tag=as5a8fa200 Call-ID: [email protected] CSeq: 2 INVITE User-Agent: Freeswitch 1.2.3 Allow: INVITE,ACK,CANCEL,OPTIONS,BYE,REFER,SUBSCRIBE,NOTIFY,INFO Supported: replaces Contact: <sip:[email protected]> Content-Length: 0 Incoming Response 7: SIP/2.0 180 Ringing Via: SIP/2.0/UDP hostName.hn:5060;branch=f8d171d3278788df9e03eb9cf3acba70-xxx.xxx.x.xxx-2-invite-hostName.hn-5060333732;received=79.181.6.233 From: "Client 310" <sip:[email protected]> To: "Client 320" <sip:[email protected]>;tag=as5a8fa200 Call-ID: [email protected] CSeq: 2 INVITE User-Agent: Freeswitch 1.2.3 Allow: INVITE,ACK,CANCEL,OPTIONS,BYE,REFER,SUBSCRIBE,NOTIFY,INFO Supported: replaces Contact: <sip:[email protected]> Content-Length: 0 Call to: [email protected] is Ringing Incoming Response 8: SIP/2.0 183 Session Progress Via: SIP/2.0/UDP hostName.hn:5060;branch=f8d171d3278788df9e03eb9cf3acba70-xxx.xxx.x.xxx-2-invite-hostName.hn-5060333732;received=79.181.6.233 From: "Client 310" <sip:[email protected]> To: "Client 320" <sip:[email protected]>;tag=as5a8fa200 Call-ID: [email protected] CSeq: 2 INVITE User-Agent: Freeswitch 1.2.3 Allow: INVITE,ACK,CANCEL,OPTIONS,BYE,REFER,SUBSCRIBE,NOTIFY,INFO Supported: replaces Contact: <sip:[email protected]> Content-Type: application/sdp Content-Length: 264 v=0 o=root 27669 27669 IN IP4 yy.yy.yy.yy s=session c=IN IP4 yy.yy.yy.yy t=0 0 m=audio 10914 RTP/AVP 0 8 101 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - a=ptime:20 a=sendrecv Incoming Response 9: SIP/2.0 503 Service Unavailable Via: SIP/2.0/UDP hostName.hn:5060;branch=f8d171d3278788df9e03eb9cf3acba70-xxx.xxx.x.xxx-2-invite-hostName.hn-5060333732;received=79.181.6.233 From: "Client 310" <sip:[email protected]> To: "Client 320" <sip:[email protected]>;tag=as5a8fa200 Call-ID: [email protected] CSeq: 2 INVITE User-Agent: Freeswitch 1.2.3 Allow: INVITE,ACK,CANCEL,OPTIONS,BYE,REFER,SUBSCRIBE,NOTIFY,INFO Supported: replaces Content-Length: 0 I do not respond to the invite, that is why all this is happening, but why am I getting a ringing if I'm not the one sending it. Thanks, Adam.

    Read the article

  • How to get objects to react to touches in Cocos2D?

    - by Wayfarer
    Alright, so I'm starting to learn more about Coco2D, but I'm kinda frusterated. A lot of the tutorials I have found are for outdated versions of the code, so when I look through and see how they do certain things, I can't translate it into my own program, because a lot has changed. With that being said, I am working in the latest version of Coco2d, version 0.99. What I want to do is create a sprite on the screen (Done) and then when I touch that sprite, I can have "something" happen. For now, let's just make an alert go off. Now, I got this code working with the help of a friend. Here is the header file: // When you import this file, you import all the cocos2d classes #import "cocos2d.h" // HelloWorld Layer @interface HelloWorld : CCLayer { CGRect spRect; } // returns a Scene that contains the HelloWorld as the only child +(id) scene; @end And here is the implementation file: // // cocos2d Hello World example // http://www.cocos2d-iphone.org // // Import the interfaces #import "HelloWorldScene.h" #import "CustomCCNode.h" // HelloWorld implementation @implementation HelloWorld +(id) scene { // 'scene' is an autorelease object. CCScene *scene = [CCScene node]; // 'layer' is an autorelease object. HelloWorld *layer = [HelloWorld node]; // add layer as a child to scene [scene addChild: layer]; // return the scene return scene; } // on "init" you need to initialize your instance -(id) init { // always call "super" init // Apple recommends to re-assign "self" with the "super" return value if( (self=[super init] )) { // create and initialize a Label CCLabel* label = [CCLabel labelWithString:@"Hello World" fontName:@"Times New Roman" fontSize:64]; // ask director the the window size CGSize size = [[CCDirector sharedDirector] winSize]; // position the label on the center of the screen label.position = ccp( size.width /2 , size.height/2 ); // add the label as a child to this Layer [self addChild: label]; CCSprite *sp = [CCSprite spriteWithFile:@"test2.png"]; sp.position = ccp(300,200); [self addChild:sp]; float w = [sp contentSize].width; float h = [sp contentSize].height; CGPoint aPoint = CGPointMake([sp position].x - (w/2), [sp position].y - (h/2)); spRect = CGRectMake(aPoint.x, aPoint.y, w, h); CCSprite *sprite2 = [CCSprite spriteWithFile:@"test3.png"]; sprite2.position = ccp(100,100); [self addChild:sprite2]; //[self registerWithTouchDispatcher]; self.isTouchEnabled = YES; } return self; } // on "dealloc" you need to release all your retained objects - (void) dealloc { // in case you have something to dealloc, do it in this method // in this particular example nothing needs to be released. // cocos2d will automatically release all the children (Label) // don't forget to call "super dealloc" [super dealloc]; } - (void)ccTouchesEnded:(NSSet *)touches withEvent:(UIEvent *)event { UITouch *touch = [touches anyObject]; //CGPoint location = [[CCDirector sharedDirector] convertCoordinate:[touch locationInView:touch.view]]; CGPoint location = [touch locationInView:[touch view]]; location = [[CCDirector sharedDirector] convertToGL:location]; if (CGRectContainsPoint(spRect, location)) { UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"Win" message:@"testing" delegate:nil cancelButtonTitle:@"okay" otherButtonTitles:nil]; [alert show]; [alert release]; NSLog(@"TOUCHES"); } NSLog(@"Touch got"); } However, this only works for 1 object, the sprite which I create the CGRect for. I can't do it for 2 sprites, which I was testing. So my question is this: How can I have all sprites on the screen react to the same event when touched? For my program, the same event needs to be run for all objects of the same type, so that should make it a tad easier. I tried making a subclass of CCNode and over write the method, but that just didn't work at all... so I'm doing something wrong. Help would be appreciated!

    Read the article

  • nhibernate configure and buildsessionfactory time

    - by davidsleeps
    Hi, I'm using Nhibernate as the OR/M tool for an asp.net application and the startup performance is really frustrating. Part of the problem is definitely me in my lack of understanding but I've tried a fair bit (understanding is definitely improving) and am still getting nowhere. Currently ANTS profiler has that the Configure() takes 13-18 seconds and the BuildSessionFActory() as taking about 5 seconds. From what i've read, these times might actually be pretty good, but they were generally talking about hundreds upon hundreds of mapped entities...this project only has 10. I've combined all the mapping files into a single hbm mapping file and this did improve things but only down to the times mentioned above... I guess, are there any "Traps for young players" that are regularly missed...obvious "I did this/have you enabled that/exclude file x/mark file y as z" etc... I'll try the serialize the configuration thing to avoid the Configure() stage, but I feel that part shouldn't be that long for that amount of entities and so would essentially be hiding a current problem... I will post source code or configuration if necessary, but I'm not sure what to put in really... thanks heaps! edit (more info) I'll also add that once this is completed, each page is extremely quick... configuration code- hibernate.cfg.xml <?xml version="1.0" encoding="utf-8" ?> <configuration> <configSections> <section name="hibernate-configuration" type="NHibernate.Cfg.ConfigurationSectionHandler, NHibernate" /> </configSections> <hibernate-configuration xmlns="urn:nhibernate-configuration-2.2"> <session-factory> <property name="dialect">NHibernate.Dialect.MsSql2005Dialect</property> <property name="connection.provider">NHibernate.Connection.DriverConnectionProvider</property> <property name="connection.driver_class">NHibernate.Driver.SqlClientDriver</property> <property name="connection.connection_string_name">MyAppDEV</property> <property name="cache.provider_class">NHibernate.Caches.SysCache.SysCacheProvider, NHibernate.Caches.SysCache</property> <property name="cache.use_second_level_cache">true</property> <property name="show_sql">false</property> <property name="proxyfactory.factory_class">NHibernate.ByteCode.Castle.ProxyFactoryFactory, NHibernate.ByteCode.Castle</property> <property name="current_session_context_class">managed_web</property> <mapping assembly="MyApp.Domain"/> </session-factory> </hibernate-configuration> </configuration> My SessionManager class which is bound and unbound in a HttpModule for each request Imports NHibernate Imports NHibernate.Cfg Public Class SessionManager Private ReadOnly _sessionFactory As ISessionFactory Public Shared ReadOnly Property SessionFactory() As ISessionFactory Get Return Instance._sessionFactory End Get End Property Private Function GetSessionFactory() As ISessionFactory Return _sessionFactory End Function Public Shared ReadOnly Property Instance() As SessionManager Get Return NestedSessionManager.theSessionManager End Get End Property Public Shared Function OpenSession() As ISession Return Instance.GetSessionFactory().OpenSession() End Function Public Shared ReadOnly Property CurrentSession() As ISession Get Return Instance.GetSessionFactory().GetCurrentSession() End Get End Property Private Sub New() Dim configuration As Configuration = New Configuration().Configure() _sessionFactory = configuration.BuildSessionFactory() End Sub Private Class NestedSessionManager Friend Shared ReadOnly theSessionManager As New SessionManager() End Class End Class edit 2 (log4net results) will post bits that have a portion of time between them and will cut out the rest... 2010-03-30 23:29:40,898 [4] INFO NHibernate.Cfg.Environment [(null)] - Using reflection optimizer 2010-03-30 23:29:42,481 [4] DEBUG NHibernate.Cfg.Configuration [(null)] - dialect=NHibernate.Dialect.MsSql2005Dialect ... 2010-03-30 23:29:42,501 [4] INFO NHibernate.Cfg.Configuration [(null)] - Mapping resource: MyApp.Domain.Mappings.hbm.xml 2010-03-30 23:29:43,342 [4] INFO NHibernate.Dialect.Dialect [(null)] - Using dialect: NHibernate.Dialect.MsSql2005Dialect 2010-03-30 23:29:50,462 [4] INFO NHibernate.Cfg.XmlHbmBinding.Binder [(null)] - Mapping class: ... 2010-03-30 23:29:51,353 [4] DEBUG NHibernate.Connection.DriverConnectionProvider [(null)] - Obtaining IDbConnection from Driver 2010-03-30 23:29:53,136 [4] DEBUG NHibernate.Connection.ConnectionProvider [(null)] - Closing connection

    Read the article

  • FBML is not rendered in Facebook App in iframe - please help

    - by Jakob
    I'm developing an Facebook Application in PHP. It's loaded as an iframe and not as FBML. The normal interaction with Facebook works. For example the following code gives the username: $facebook = new Facebook($config->appapikey, $config->appsecret); $user_id = $facebook->require_login($required_permissions = 'email'); echo $user->name; Where $user is my class in which the user-details are loaded from facebook. My document begins the following way: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xmlns:fb="http://www.facebook.com/2008/fbml"> <head><title>Appname</title> </head> <body> <script src="http://static.ak.connect.facebook.com/js/api_lib/v0.4/FeatureLoader.js.php/de_DE" type="text/javascript"></script> And ends likes this: <script type="text/javascript"> FB_RequireFeatures(['XFBML','CanvasUtil'], function(){ FB.init("<?php echo $config->appapikey; ?>", "/app/xd_receiver.htm"); FB.CanvasClient.startTimerToSizeToContent(); }); </script> </body> </html> Also the file xd_receiver.htm is loaded as I can see in Firebug. But my problem is that for example the request-form is not loaded. My code: <fb:serverFbml> <script type="text/fbml"> <fb:fbml> <fb:request-form method="post" action="<?php echo $config->site; ?>index.php" type="appname" invite="true" target="_top" content="content"> <fb:multi-friend-selector actiontext="text" rows="3" showborder="true" target="_top"/> </fb:request-form> </fb:fbml> </script> </fb:serverFbml> I can see the code with Firebug but the form ist not displayed by Facebook. 2 or 3 weeks ago it was displayed but in this time I had the tags </fb:fbml> </script> </fb:serverFbml> arround my complete text in the body. 2 weeks ago I had the the problem that nothing any more was displayed. After I removed the tags my app is displayed but not the form. I am searchign the web vor 1 week now and read many Threads about FBML and XFBML in Facebook but nothing worked for me. So thank you in advance for help.

    Read the article

  • Driving me INSANE: Unable to Retrieve Metadata for

    - by Loren
    I've been spending the past 3 days trying to fix this problem I'm encountering - it's driving me insane... I'm not quite sure what is causing this bug - here are the details: MVC4 + Entity Framework 4.4 + MySql + POCO/Code First I'm setting up the above configuration .. here are my classes: namespace BTD.DataContext { public class BTDContext : DbContext { public BTDContext() : base("name=BTDContext") { } protected override void OnModelCreating(DbModelBuilder modelBuilder) { base.OnModelCreating(modelBuilder); //modelBuilder.Conventions.Remove<System.Data.Entity.Infrastructure.IncludeMetadataConvention>(); } public DbSet<Product> Products { get; set; } public DbSet<ProductImage> ProductImages { get; set; } } } namespace BTD.Data { [Table("Product")] public class Product { [Key] public long ProductId { get; set; } [DisplayName("Manufacturer")] public int? ManufacturerId { get; set; } [Required] [StringLength(150)] public string Name { get; set; } [Required] [DataType(DataType.MultilineText)] public string Description { get; set; } [Required] [StringLength(120)] public string URL { get; set; } [Required] [StringLength(75)] [DisplayName("Meta Title")] public string MetaTitle { get; set; } [DataType(DataType.MultilineText)] [DisplayName("Meta Description")] public string MetaDescription { get; set; } [Required] [StringLength(25)] public string Status { get; set; } [DisplayName("Create Date/Time")] public DateTime CreateDateTime { get; set; } [DisplayName("Edit Date/Time")] public DateTime EditDateTime { get; set; } } [Table("ProductImage")] public class ProductImage { [Key] public long ProductImageId { get; set; } public long ProductId { get; set; } public long? ProductVariantId { get; set; } [Required] public byte[] Image { get; set; } public bool PrimaryImage { get; set; } public DateTime CreateDateTime { get; set; } public DateTime EditDateTime { get; set; } } } Here is my web.config setup... <connectionStrings> <add name="BTDContext" connectionString="Server=localhost;Port=3306;Database=btd;User Id=root;Password=mypassword;" providerName="MySql.Data.MySqlClient" /> </connectionStrings> The database AND tables already exist... I'm still pretty new with mvc but was using this tutorial The application builds fine.. however when I try to add a controller using Product (BTD.Data) as my model class and BTDContext (BTD.DataContext) as my data context class I receive the following error: Unable to retrieve metadata for BTD.Data.Product using the same DbCompiledModel to create context against different types of database servers is not supported. Instead, create a separate DbCompiledModel for each type of server being used. I am at a complete loss - I've scoured google with almost every different variation of that error message above I can think of but to no avail. Here are the things i can verify... MySql is working properly I'm using MySql Connector version 6.5.4 and have created other ASP.net web forms + entity framework applications with ZERO problems I have also tried including/removing this in my web.config: <system.data> <DbProviderFactories> <remove invariant="MySql.Data.MySqlClient"/> <add name="MySQL Data Provider" invariant="MySql.Data.MySqlClient" description=".Net Framework Data Provider for MySQL" type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data, Version=6.5.4.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" /> </DbProviderFactories> I've literally been working on this bug for days - I'm to the point now that I would be willing to pay someone to solve it.. no joke... I'd really love to use MVC 4 and Razor - I was so excited to get started on this, but now i'm pretty discouraged - I truly appreciate any help/guidance on this! Also note - i'm using Entityframework from Nuget... Another Note I was using the default visual studio template that creates your MVC project with the account pages and other stuff. I JUST removed all references to the added files because they were trying to use the "DefaultConnection" which didn't exist - so i thought those files may be what was causing the error - however still no luck after removing them - I just wanted to let everyone know i'm using the visual studio MVC project template which pre-creates a bunch of files. I will be trying to recreate this all from a blank MVC project which doesn't have those files - i will update this once i test that Other References It appears someone else is having the same issues I am - the only difference is they are using sql server - I tried tweaking all my code to follow the suggestions on this stackoverflow question/answer here but still to no avail

    Read the article

  • Results Delphi users who wish to use HID USB in windows

    - by Lex Dean
    Results Delphi users who wish to use HID USB in windows HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB Contain a list if keys containing vender ID and Producer ID numbers that co inside with the USB web sites data base. These numbers and the GUID held within the key gives important information to execute the HID.dll that is otherwise imposable to execute. The Control Panel/System/Hardware/Device manager/USB Serial Bus Controllers/Mass Storage Devices/details simply lists the registry data. The access to the programmer has been documented through the API32.dll with a number of procedures that accesses the registry. But that is not the problem yet it looks like the problem!!!!!!!!! The key is info about the registry and how to use it. These keys are viewed in RegEdit.exe it’s self. Some parts of the registry like the USB have been given a windows security system type of protection with a Aurthz.dll to give the USB read and right protection. Even the api32.dll. Now only Microsoft give out these details and we all know Microsoft hate Delphi. Now C users have enjoyed this access for over 10 years now. Now some will make out that you should never give out such information because some idiot may make a stupid virus (true), but the argument is also do Delphi users need to be denied USB access for another ten years!!!!!!!!!!!!. What I do not have is the skill in is assembly code. I’m seeking for some one that can trace how regedit.exe gets its access through Aurthz.dll to access the USB data. So I’m asking all who reads this:- to partition any friend they have that has this skill to get the Aurthz.dll info needed. I find communicating with USB.org they reply when they have a positive email reply but do not bother should their email be a slightly negative policy. For all simple reasoning, all that USB had to do was to have a secure key as they have done, and to update the same data into a unsecured key every time the data is changed for USB developer to access. And not bother developers access to Aurthz.dll. Authz.dll with these functions for USB:- AuthzFreeResourceManager AuthzFreeContext AuthzAccessCheck(Flags: DWORD; AuthzClientContext: AUTHZ_CLIENT_CONTEXT_HANDLE; pRequest: PAUTHZ_ACCESS_REQUEST; AuditInfo: AUTHZ_AUDIT_INFO_HANDLE; pSecurityDescriptor: PSECURITY_DESCRIPTOR; OptionalSecurityDescriptorArray: PSECURITY_DESCRIPTOR; OptionalSecurityDescriptorCount: DWORD; //OPTIONAL, Var pReply: AUTHZ_ACCESS_REPLY; pAuthzHandle: PAUTHZ_ACCESS_CHECK_RESULTS_HANDLE): BOOl; AuthzInitializeContextFromSid(Flags: DWORD; UserSid: PSID; AuthzResourceManager: AUTHZ_RESOURCE_MANAGER_HANDLE; pExpirationTime: int64; Identifier: LUID; DynamicGroupArgs: PVOID; pAuthzClientContext: PAUTHZ_CLIENT_CONTEXT_HANDLE): BOOL; AuthzInitializeResourceManager(flags: DWORD; pfnAccessCheck: PFN_AUTHZ_DYNAMIC_ACCESS_CHECK; pfnComputeDynamicGroups: PFN_AUTHZ_COMPUTE_DYNAMIC_GROUPS; pfnFreeDynamicGroups: PFN_AUTHZ_FREE_DYNAMIC_GROUPS; ResourceManagerName: PWideChar; pAuthzResourceManager: PAUTHZ_RESOURCE_MANAGER_HANDLE): BOOL; further in Authz.h on kolers.com J Lex Dean.

    Read the article

  • overloaded stream insertion operator with a vector

    - by Julz
    hi, i'm trying to write an overloaded stream insertion operator for a class who's only member is a vector. i dont really know what i'm doing. (lets make that clear) it's a vector of "Points" which is a struct containing two doubles. i figure what i want is to insert user input (a bunch of doubles) into a stream that i then send to a modifier method? i keep working off other stream insertion examples such as... std::ostream& operator<< (std::ostream& o, Fred const& fred) { return o << fred.i_; } but when i try a similar..... istream & operator >> (istream &inStream, Polygon &vertStr) { inStream >> ws; inStream >> vertStr.vertices; return inStream; } i get an error "no match for operator etc etc. if i leave off the .vertices it compiles but i figure it's not right? (vertices is the name of my vector ) and even if it is right, i dont actually know what syntax to use in my driver to use it? also not %100 on what my modifier method needs to look like. here's my Polygon class //header #ifndef POLYGON_H #define POLYGON_H #include "Segment.h" #include <vector> class Polygon { friend std::istream & operator >> (std::istream &inStream, Polygon &vertStr); public: //Constructor Polygon(const Point &theVerts); //Default Constructor Polygon(); //Copy Constructor Polygon(const Polygon &polyCopy); //Accessor/Modifier methods inline std::vector<Point> getVector() const {return vertices;} //Return number of Vector elements inline int sizeOfVect() const {return (int) vertices.capacity();} //add Point elements to vector inline void setVertices(const Point &theVerts){vertices.push_back (theVerts);} private: std::vector<Point> vertices; }; #endif //Body using namespace std; #include "Polygon.h" // Constructor Polygon::Polygon(const Point &theVerts) { vertices.push_back (theVerts); } //Copy Constructor Polygon::Polygon(const Polygon &polyCopy) { vertices = polyCopy.vertices; } //Default Constructor Polygon::Polygon(){} istream & operator >> (istream &inStream, Polygon &vertStr) { inStream >> ws; inStream >> vertStr; return inStream; } any help greatly appreciated, sorry to be so vague, a lecturer has just kind of given us a brief example of stream insertion then left us on our own thanks. oh i realise there are probably many other problems that need fixing

    Read the article

  • Diagramming Software for a Developer/Designer

    - by Craig Walker
    For a long time I've been looking for a good diagramming/vector-based drawing program that meets my needs as a developer. I'd like to: Draw database diagrams Draw flow charts Draw object-modeling diagrams (UML being the standard) Draw other free-form diagrams (basically boxes & arrows with the occasional clipart) Draw mockups of user interfaces and web pages EDIT: I want good-looking electronic-format diagrams that I can show to 3rd parties, not just something for my own internal use. EDIT 2: I'm also looking for Windows software, although I'm toying with the idea of switching to Mac, so a really good Mac-only product might get me to switch. Basically I need a good vector graphic program (with decent grouping, connecting lines, and ideally auto-routing). I'd prefer a diagramming tool that can also be used for drawing (for the UI mockups) rather than a drawing tool that can also be used for diagrams. I've tried Visio on several occasions, and every time I've been disappointed. The interface always seems to get in my way at some point. It's pretty close to what I want, and the latest version (I got the trail from MS) seems to be better than previous ones in terms of usability, but I really don't want to plunk down that sort of cash for a mediocre product. I've tried Dia and Inkscape, and while initially promising and with the right price tag, I found both of them to be lacking in several ways (including some recurring bugs). I've toyed with getting Adobe Illustrator, but I've never used it before, and I have a feeling that it wouldn't handle the diagramming aspect very well, and I don't want to buy a copy just to find out it doesn't meet my needs. So far, the product that I've had the most success with is, sadly, OpenOffice Draw. It's free of course (which lowers my expectations and thus improves my view of it) and its usability is pretty good, but in the end I'd like something more suited to diagramming. I'm willing to spend real money (in the $500-$1K range) for a really good piece of software if it does everything I want it to. The front runner is of course Visio but I'm hoping for more. Does anybody have any recommendations? CONCLUSION: @dlamblin had the most informative post, but the part I gained the most from was his/her (and others) mention of OmniGraffle, not Gliffy. I gave Gliffy a try, and it seemed neet for occational use, but since it's a Flash app (note: not AJAX as dlamblin mentioned) it's still a bit of a pain to use (no keyboard shortcuts for copy/paste was pretty much a deal breaker for me). I also tried SmartDraw, but it had 3-strikes-you're-out against it: The trial period was only 7 days long. It used some nonstandard (and visually jarring) GUI widget toolkit for its UI. At the very least it makes me suspicious (how do I know it will actually work & support the standard Windows features?) It crashed on me early into my trial. OmniGraffle looks like exactly what I want... except that it's Mac-only (so I couldn't give it a try). However, it got good reviews from my Mac-owning coworker, and I hope to try it on a friend's Mac soon. If it's good enough then I might spring for a new MacBook.

    Read the article

  • Rails & combo box change event: Help make this obtrusive javascript unobtrusive

    - by DJTripleThreat
    Ok so a friend of mine gave some help with a prototype/obtrusive solution to this but its not quite there. Also, I want to make this unobtrusive instead of using the observe_field function that rails gives me. I don't want to use prototype either because I'm more familiar with JQuery. Here's my problem: I have an Event that can have multiple ServiceTypes and a ServiceType can belong to many Events. A many-to-many relationship between these two exists as an OfferedService. When creating an event, I have a drop down with a list of TimeAllotments that are something like 10 minutes, 12 minutes, 15 minutes, 20 minutes, 30 minutes etc. When the user selects one of these choices, I want a div tag to be filled with a list of ServiceTypes that are associated with this TimeAllotment. So for example, the user selects "10 minutes" and then the div repopulates with services that last 10 minutes. Here is what I have so far: ... some erb code etc and then <fieldset> <legend><%= f.label :time_allotment, "Size of the Appointment Slots:" %></legend> <div> <span class="field-group"> <div> <!-- TimeAllotment is a tabless model which is why this is done like so... --> <%= select("event_service", "time_allotment", TimeAllotment.all.collect {|ta| [ta.title, ta.value]}, {:prompt => true}) %> </div> </span> </div> <div style="clear:both;"></div> Services: <div> <span class="field-group"> <!-- this div right here needs to be repopulated when the above select changes. --> <div id="services"> <% for service_type in ServiceType.all %> <div> <%= check_box_tag "event_service[service_type_ids][]", service_type.id, false %> <%=h service_type.title %> </div> <% end %> </div> </span> </div> <div class="clear"></div> </fieldset> ok so right now ALL of the services are there to be chosen from. I want them to change based on what is selected in the combobox event_service_time_allotment. Can someone help me get pointed in the right direction? I have looked at Ryan's rails casts for using JQuery but its not helpful because he deals with ajax calls for the create action. This would be for the new or edit action. I have a new.js.erb but it doesn't get loaded when calling the new action. I'm super lost as far as getting JQuery to work with my application. I think that if someone can just show me how to make an alert pop up when I change the combo box, and how to return a dataset using ajax the right now, I think I can figure out the rest. Thanks, I know this is super complicated so any helpful answers will get an upvote.

    Read the article

  • rails: "unknown action" message when action is clearly specified

    - by john
    hi, I had hard time to figure out why I've been getting "unknown action" error message when I was do some editing: Unknown action No action responded to 11. Actions: bin, create, destroy, edit, index, new, observe_new, show, tag, update, and vote you can see that Rails did mention each action in the above list - update. And in my form, I did specify action = "update". I wonder if some friends could kindly help me with the missing links... here is the code: edit.rhtml <h1>Editing tip</h1> <% form_tag :action => 'update', :id => @tip do %> <%= render :partial => 'form' %> <p> <%= submit_tag_or_cancel 'Save Changes' %> </p> <% end %> _form.rhtml <%= error_messages_for :tip %> <p><label>Title<br/> <%= text_field :tip, :title %></label></p> <p><label>Categories<br/> <%= select_tag('categories[]', options_for_select(Category.find(:all).collect {|c| [c.name, c.id] }, @tip.category_ids), :multiple => true ) %></label></p> <p><label>Abstract:<br/> <%= text_field_with_auto_complete :tip, :abstract %></label></p> <p><label>Name: <br/> <%= text_field :tip, :name %></label></p> <p><label>Link: <br/> <%= text_field :tip, :link %></label></p> <p><label>Content<br/> <%= text_area :tip, :content, :rows => 5 %></label></p> <p><label>Tags <span>(space separated)</span><br/> <%= text_field_tag 'tags', @tip.tag_list, :size => 40 %></label></p> class TipsController < ApplicationController before_filter :authenticate, :except => %w(index show) # GET /tips # GET /tips.xml def index @tips = Tip.all respond_to do |format| format.html # index.html.erb format.xml { render :xml => @tips } end end # GET /tips/1 # GET /tips/1.xml def show @tip = Tip.find_by_permalink(params[:permalink]) respond_to do |format| format.html # show.html.erb format.xml { render :xml => @tip } end end # GET /tips/new # GET /tips/new.xml def new @tip = session[:tip_draft] || current_user.tips.build end def create #tip = current_user.tips.build(params[:tip]) #tipMail=params[:email] #if tipMail # TipMailer.deliver_email_friend(params[:email], params[:name], tip) # flash[:notice] = 'Your friend has been notified about this tip' #end @tip = current_user.tips.build(params[:tip]) @tip.categories << Category.find(params[:categories]) unless params[:categories].blank? @tip.tag_with(params[:tags]) if params[:tags] if @tip.save flash[:notice] = 'Tip was successfully created.' session[:tip_draft] = nil redirect_to :action => 'index' else render :action => 'new' end end def edit @tip = Tip.find(params[:id]) end def update @tip = Tip.find(params[:id]) respond_to do |format| if @tip.update_attributes(params[:tip]) flash[:notice] = 'Tip was successfully updated.' format.html { redirect_to(@tip) } format.xml { head :ok } else format.html { render :action => "edit" } format.xml { render :xml => @tip.errors, :status => :unprocessable_entity } end end end def destroy @tip = Tip.find(params[:id]) @tip.destroy respond_to do |format| format.html { redirect_to(tips_url) } format.xml { head :ok } end end def observe_new session[:tip_draft] = current_user.tips.build(params[:tip]) render :nothing => true end end

    Read the article

  • WCF and Firewalls

    - by Amitd
    Hi guys, As a part of learning WCF, I was trying to use a simple WCF client-server code . http://weblogs.asp.net/ralfw/archive/2007/04/14/a-truely-simple-example-to-get-started-with-wcf.aspx but I'm facing strange issues.I was trying out the following. Client(My) IP address is : 192.168.2.5 (internal behind firewall) Server IP address is : 192.168.50.30 port : 9050 (internal behind firewall) Servers LIVE/External IP (on internet ) : 121.225.xx.xx (accessible from internet) When I specify the above I.P address of server(192.168.50.30), the client connects successfully and can call servers methods. Now suppose if I want to give my friend (outside network/on internet) the client with server's live I.P, i get an ENDPOINTNOTFOUND exceptions. Surprisingly if I run the above client specifying LIVE IP(121.225.xx.xx) of server i also get the same exception. I tried to debug the problem but haven't found anything. Is it a problem with the company firewall not forwarding my request? or is it a problem with the server or client . Is something needed to be added to the server/client to overcome the same problem? Or are there any settings on the firewall that need to be changed like port forwarding? (our network admin has configured the port to be accessible from the internet.) is it a authentication issue? Code is available at . http://www.ralfw.de/weblog/wcfsimple.txt http://weblogs.asp.net/ralfw/archive/2007/04/14/a-truely-simple-example-to-get-started-with-wcf.aspx i have just separated the client and server part in separate assemblies.rest is same. using System; using System.Collections.Generic; using System.Text; using System.ServiceModel; namespace WCFSimple.Contract { [ServiceContract] public interface IService { [OperationContract] string Ping(string name); } } namespace WCFSimple.Server { [ServiceBehavior(InstanceContextMode = InstanceContextMode.PerCall)] class ServiceImplementation : WCFSimple.Contract.IService { #region IService Members public string Ping(string name) { Console.WriteLine("SERVER - Processing Ping('{0}')", name); return "Hello, " + name; } #endregion } public class Program { private static System.Threading.AutoResetEvent stopFlag = new System.Threading.AutoResetEvent(false); public static void Main() { ServiceHost svh = new ServiceHost(typeof(ServiceImplementation)); svh.AddServiceEndpoint( typeof(WCFSimple.Contract.IService), new NetTcpBinding(), "net.tcp://localhost:8000"); svh.Open(); Console.WriteLine("SERVER - Running..."); stopFlag.WaitOne(); Console.WriteLine("SERVER - Shutting down..."); svh.Close(); Console.WriteLine("SERVER - Shut down!"); } public static void Stop() { stopFlag.Set(); } } } namespace WCFSimple { class Program { static void Main(string[] args) { Console.WriteLine("WCF Simple Demo"); // start server System.Threading.Thread thServer = new System.Threading.Thread(WCFSimple.Server.Program.Main); thServer.IsBackground = true; thServer.Start(); System.Threading.Thread.Sleep(1000); // wait for server to start up // run client ChannelFactory<WCFSimple.Contract.IService> scf; scf = new ChannelFactory<WCFSimple.Contract.IService>( new NetTcpBinding(), "net.tcp://localhost:8000"); WCFSimple.Contract.IService s; s = scf.CreateChannel(); while (true) { Console.Write("CLIENT - Name: "); string name = Console.ReadLine(); if (name == "") break; string response = s.Ping(name); Console.WriteLine("CLIENT - Response from service: " + response); } (s as ICommunicationObject).Close(); // shutdown server WCFSimple.Server.Program.Stop(); thServer.Join(); } } } Any help?

    Read the article

  • Unit Testing Refcounted Critical Section Class

    - by BillyONeal
    Hello all :) I'm looking at a simple class I have to manage critical sections and locks, and I'd like to cover this with test cases. Does this make sense, and how would one go about doing it? It's difficult because the only way to verify the class works is to setup very complicated threading scenarios, and even then there's not a good way to test for a leak of a Critical Section in Win32. Is there a more direct way to make sure it's working correctly? Here's the code: CriticalSection.hpp: #pragma once #include <windows.h> namespace WindowsAPI { namespace Threading { class CriticalSection; class CriticalLock { std::size_t *instanceCount; CRITICAL_SECTION * criticalStructure; bool lockValid; friend class CriticalSection; CriticalLock(std::size_t *, CRITICAL_SECTION *, bool); public: bool IsValid() { return lockValid; }; void Unlock(); ~CriticalLock() { Unlock(); }; }; class CriticalSection { std::size_t *instanceCount; CRITICAL_SECTION * criticalStructure; public: CriticalSection(); CriticalSection(const CriticalSection&); CriticalSection& operator=(const CriticalSection&); CriticalSection& swap(CriticalSection&); ~CriticalSection(); CriticalLock Enter(); CriticalLock TryEnter(); }; }} CriticalSection.cpp: #include "CriticalSection.hpp" namespace WindowsAPI { namespace Threading { CriticalSection::CriticalSection() { criticalStructure = new CRITICAL_SECTION; instanceCount = new std::size_t; *instanceCount = 1; InitializeCriticalSection(criticalStructure); } CriticalSection::CriticalSection(const CriticalSection& other) { criticalStructure = other.criticalStructure; instanceCount = other.instanceCount; instanceCount++; } CriticalSection& CriticalSection::operator=(const CriticalSection& other) { CriticalSection copyOfOther(other); swap(copyOfOther); return *this; } CriticalSection& CriticalSection::swap(CriticalSection& other) { std::swap(other.instanceCount, instanceCount); std::swap(other.criticalStructure, other.criticalStructure); return *this; } CriticalSection::~CriticalSection() { if (!--(*instanceCount)) { DeleteCriticalSection(criticalStructure); delete criticalStructure; delete instanceCount; } } CriticalLock CriticalSection::Enter() { EnterCriticalSection(criticalStructure); (*instanceCount)++; return CriticalLock(instanceCount, criticalStructure, true); } CriticalLock CriticalSection::TryEnter() { bool lockAquired; if (TryEnterCriticalSection(criticalStructure)) { (*instanceCount)++; lockAquired = true; } else lockAquired = false; return CriticalLock(instanceCount, criticalStructure, lockAquired); } void CriticalLock::Unlock() { if (!lockValid) return; LeaveCriticalSection(criticalStructure); lockValid = false; if (!--(*instanceCount)) { DeleteCriticalSection(criticalStructure); delete criticalStructure; delete instanceCount; } } }}

    Read the article

  • Mercurial "hg clone" on Windows via ssh with plink issue

    - by Kyle Tolle
    I have a Windows Server 2008 machine (iis7) that has CopSSH set up on it. To connect to it, I have a Windows 7 machine with Mercurial 1.5.1 (and TortoiseHg) installed. I can connect to the server using PuTTY with a non-standard ssh port and a .ppk file just fine. So I know the server can be SSH'd into. Next, I wanted to use the CLI to connect via hg clone to get a private repo. I've seen elsewhere that you need to have ssh configured in your mercurial.ini file, so my mercurial.ini has a line: ssh = plink.exe -ssh -C -l username -P #### -i "C:/Program Files/PuTTY/Key Files/KyleKey.ppk" Note: username is filled in with the username I set up via copSSH. #### is filled in with the non-standard ssh port I've defined for copSSH. I try to do the command hg clone ssh://inthom.com but I get this error: remote: bash: inthom.com: command not found abort: no suitable response from remote hg! It looks like hg or plink parses the hostname such that it thinks that inthom.com is a command instead of the server to ssh to. That's really odd. Next, I tried to just use plink to connect by plink -P #### ssh://inthom.com, and I am then prompted for my username, and next password. I enter them both and then I get this error: bash: ssh://inthom.com: No such file or directory So now it looks like plink doesn't parse the hostname correctly. I fiddled around for a while trying to figure out how to do call hg clone with an empty ssh:// field and eventually figured out that this command allows me to reach the server and clone a test repo on the inthom.com server: hg clone ssh://!/Repos/test ! is the character I've found that let's me leave the hostname blank, but specify the repo folder to clone. What I really don't understand is how plink knows what server to ssh to at all. neither my mercurial.ini nor the command specify a server. None of the hg clone examples I've seen have a ! character. They all use an address, which makes sense, so you can connect to any repo via ssh that you want to clone. My only guess is that it somehow defaults to the last server I used PuTTY to SSH to, but I SSH'd into another server, and then tried to use plink to get to it, but plink still defaults to inthom.com (verified with the -v arg to plink). So I am at a loss as to how plink gets this server value at all. For "fun", I tried using TortoiseHg and can only clone a repo when I use ssh://!/Repos/test as the Source. Now, you can see that, since plink doesn't parse the hostname correctly, I had to specify the port number and username in the mercurial.ini file, instead of in the hostname like [email protected]:#### like you'd expect to. Trying to figure this out at first drove me insane, because I would get errors that the host couldn't be reached, which I knew shouldn't be the case. My question is how can I configure my setup so that ssh://[email protected]:####/Repos/test is parsed correctly as the username, hostname, port number, and repo to copy? Is it something wrong with the version of plink that I'm using, or is there some setting I may have messed up? If it is plink's fault, is there an alternative tool I can use? I'm going to try to get my friend set up to connect to this same repo, so I'd like to have a clean solution instead of this ! business. Especially when I have no idea how plink gets this default server, so I'm not sure if he'd even be able to get to inthom.com correctly. PS. I've had to use a ton of different tutorials to even get to this stage. Therefore, I haven't tried pushing any changes to the server yet. Hopefully I'll get this figured out and then I can try pushing changes to the repo.

    Read the article

  • operator overloading of stream extraction operator in C++ help

    - by Crystal
    I'm having some trouble overloading my stream extraction operator in C++ for a hw assignment. I'm not really sure why I am getting these compile errors since I thought I was doing it right... Here is my code: Complex.h #ifndef COMPLEX_H #define COMPLEX_H class Complex { //friend ostream &operator<<(ostream &output, const Complex &complexObj) const; public: Complex(double = 0.0, double = 0.0); // constructor Complex operator+(const Complex &) const; // addition Complex operator-(const Complex &) const; // subtraction void print() const; // output private: double real; // real part double imaginary; // imaginary part }; #endif Complex.cpp #include <iostream> #include "Complex.h" using namespace std; // Constructor Complex::Complex(double realPart, double imaginaryPart) : real(realPart), imaginary(imaginaryPart) { } // addition operator Complex Complex::operator+(const Complex &operand2) const { return Complex(real + operand2.real, imaginary + operand2.imaginary); } // subtraction operator Complex Complex::operator-(const Complex &operand2) const { return Complex(real - operand2.real, imaginary - operand2.imaginary); } // Overload << operator ostream &Complex::operator<<(ostream &output, const Complex &complexObj) const { cout << '(' << complexObj.real << ", " << complexObj.imaginary << ')'; return output; // returning output allows chaining } // display a Complex object in the form: (a, b) void Complex::print() const { cout << '(' << real << ", " << imaginary << ')'; } main.cpp #include <iostream> #include "Complex.h" using namespace std; int main() { Complex x; Complex y(4.3, 8.2); Complex z(3.3, 1.1); cout << "x: "; x.print(); cout << "\ny: "; y.print(); cout << "\nz: "; z.print(); x = y + z; cout << "\n\nx = y + z: " << endl; x.print(); cout << " = "; y.print(); cout << " + "; z.print(); x = y - z; cout << "\n\nx = y - z: " << endl; x.print(); cout << " = "; y.print(); cout << " - "; z.print(); cout << endl; } Compile erros: complex.cpp(23) : error C2039: '<<' : is not a member of 'Complex' complex.h(5) : see declaration of 'Complex' complex.cpp(24) : error C2270: '<<' : modifiers not allowed on nonmember functions complex.cpp(25) : error C2248: 'Complex::real' : cannot access private member declared in class 'Complex' complex.h(13) : see declaration of 'Complex::real' complex.h(5) : see declaration of 'Complex' complex.cpp(25) : error C2248: 'Complex::imaginary' : cannot access private member declared in class 'Complex' complex.h(14) : see declaration of 'Complex::imaginary' complex.h(5) : see declaration of 'Complex' Thanks!

    Read the article

  • problem to genrate swf file.

    - by nemade-vipin
    hello friend I have created one flex Air application where I have created the one authentication actionscript class. and one mxml file.This complete application using webservice and google map API. but when I am building application it is not genrating the SWF file in bin-debug folder. that is changes not reflecting in our application. my code is:- Action script class is :- package src { import adobe.utils.XMLUI; import mx.rpc.events.FaultEvent; import mx.controls.Alert; import generated.webservices.*; import mx.collections.ArrayCollection; public class Authentication { [Bindable] private var childName:ArrayCollection; [Bindable] private var childId:ArrayCollection; private var photoFeed:ArrayCollection; private var arrayOfchild:Array; private var newEntry:GetSBTSMobileAuthentication; public function authentication():void { // Instantiate a new Entry object. user = new SBTSWebService(); if(user!=null) { user.addSBTSWebServiceFaultEventListener(handleFaults); user.addgetSBTSMobileAuthenticationEventListener(authenticationResult); newEntry = new GetSBTSMobileAuthentication(); if(newEntry!=null) { newEntry.mobile=mobileno.text; newEntry.password=password.text; user.getSBTSMobileAuthentication(newEntry); } } } public function handleFaults(event:FaultEvent):void { Alert.show("A fault occured contacting the server. Fault message is: " + event.fault.faultString); } public function authenticationResult(event:GetSBTSMobileAuthenticationResultEvent):void { if(event.result != null && event.result._return>0) { if(event.result._return > 0) { var UserId:int = event.result._return; loginform.enabled = false; //getChildList(UserId); viewstack2.selectedIndex=1; } else { Alert.show("Authentication fail"); } } } } } mxml file is :- import src.Authentication; var user:Authentication = new Authentication(); ]]> <mx:TabNavigator id="viewstack2" selectedIndex="0" creationPolicy="all" width="100%" height="100%"> <mx:Form label="Login Form" id="loginform"> <mx:FormItem label="Mobile NO:"> <mx:TextInput id="mobileno"/> </mx:FormItem> <mx:FormItem label="Password:"> <mx:TextInput displayAsPassword="true" id="password" /> </mx:FormItem> <mx:FormItem> <mx:Button label="Login" click="user.authentication()"/> </mx:FormItem> </mx:Form> <mx:Form label="Child List"> <mx:Label width="100%" color="blue" text="Select Child."/> </mx:Form> <mx:Form label="Child Information"> </mx:Form> <mx:Form label="Bus Location"> </mx:Form> <mx:Form label="Bus path"> </mx:Form> </mx:TabNavigator> </mx:Panel>

    Read the article

  • Is the Unix Philosophy still relevant in the Web 2.0 world?

    - by David Titarenco
    Introduction Hello, let me give you some background before I begin. I started programming when I was 5 or 6 on my dad's PSION II (some primitive BASIC-like language), then I learned more and more, eventually inching my way up to C, C++, Java, PHP, JS, etc. I think I'm a pretty decent coder. I think most people would agree. I'm not a complete social recluse, but I do stuff like write a virtual machine for fun. I've never taken a computer course in college because I've been in and out for the past couple of years and have only been taking core classes; never having been particularly amazing at school, perhaps I'm missing some basic tenet that most learn in CS101. I'm currently reading Coders at Work and this question is based on some ideas I read in there. A Brief (Fictionalized) Example So a certain sunny day I get an idea. I hire a designer and hammer away at some C/C++ code for a couple of months, soon thereafter releasing silvr.com, a website that transmutes lead into silver. Yep, I started my very own start-up and even gave it a clever web 2.0 name with a vowel missing. Mom and dad are proud. I come up with some numbers I should be seeing after 1, 2, 3, 6, 9, 12 months and set sail. Obviously, my transmuting server isn't perfect, sometimes it segfaults, sometimes it leaks memory. I fix it and keep truckin'. After all, gdb is my best friend. Eventually, I'm at a position where a very small community of people are happily transmuting lead into silver on a semi-regular basis, but they want to let their friends on MySpace know how many grams of lead they transmuted today. And they want to post images of their lead and silver nuggets on flickr. I'm losing out on potential traffic unless I let them log in with their Yahoo, Google, and Facebook accounts. They want webcam support and live cock fighting, merry-go-rounds and Jabberwockies. All these things seem necessary. The Aftermath Of course, I have to re-write the transmuting server! After all, I've been losing money all these months. I need OAuth libraries and OpenID libraries, JSON support, and the only stable Jabberwocky API is for Java. C++ isn't even an option anymore. I'm just one guy! The Java binary just grows and grows since I need some legacy Apache include for the JSON library, and some antiquated Sun dependency for OAuth support. Then I pick up a book like Coders at Work and read what people like jwz say about complexity... I think to myself.. Keep it simple, stupid. I like simple things. I've always loved the Unix Philosophy but even after trying to keep the new server source modular and sleek, I loathe having to write one more line of code. It feels that I'm just piling crap on top of other crap. Maybe I'm naive thinking every piece of software can be simple and clever. Maybe it's just a phase.. or is the Unix Philosophy basically dead when it comes to the current state of (web) development? I'm just kind of disheartened :(

    Read the article

  • Template problems: No matching function for call

    - by Nick Sweet
    I'm trying to create a template class, and when I define a non-member template function, I get the "No matching function for call to randvec()" error. I have a template class defined as: template <class T> class Vector { T x, y, z; public: //constructors Vector(); Vector(const T& x, const T& y, const T& z); Vector(const Vector& u); //accessors T getx() const; T gety() const; T getz() const; //mutators void setx(const T& x); void sety(const T& y); void setz(const T& z); //operations void operator-(); Vector plus(const Vector& v); Vector minus(const Vector& v); Vector cross(const Vector& v); T dot(const Vector& v); void times(const T& s); T length() const; //Vector<T>& randvec(); //operators Vector& operator=(const Vector& rhs); friend std::ostream& operator<< <T>(std::ostream&, const Vector<T>&); }; and the function in question, which I've defined after all those functions above, is: //random Vector template <class T> Vector<double>& randvec() { const int min=-10, max=10; Vector<double>* r = new Vector<double>; int randx, randy, randz, temp; const int bucket_size = RAND_MAX/(max-min +1); temp = rand(); //voodoo hackery do randx = (rand()/bucket_size)+min; while (randx < min || randx > max); r->setx(randx); do randy = (rand()/bucket_size)+min; while (randy < min || randy > max); r->sety(randy); do randz = (rand()/bucket_size)+min; while (randz < min || randz > max); r->setz(randz); return *r; } Yet, every time I call it in my main function using a line like: Vector<double> a(randvec()); I get that error. However, if I remove the template and define it using 'double' instead of 'T', the call to randvec() works perfectly. Why doesn't it recognize randvec()? P.S. Don't mind the bit labeled voodoo hackery - this is just a cheap hack so that I can get around another problem I encountered.

    Read the article

  • How to implement Cocoa copyWithZone on derived object in MonoMac C#?

    - by Justin Aquadro
    I'm currently porting a small Winforms-based .NET application to use a native Mac front-end with MonoMac. The application has a TreeControl with icons and text, which does not exist out of the box in Cocoa. So far, I've ported almost all of the ImageAndTextCell code in Apple's DragNDrop example: https://developer.apple.com/library/mac/#samplecode/DragNDropOutlineView/Listings/ImageAndTextCell_m.html#//apple_ref/doc/uid/DTS40008831-ImageAndTextCell_m-DontLinkElementID_6, which is assigned to an NSOutlineView as a custom cell. It seems to be working almost perfectly, except that I have not figured out how to properly port the copyWithZone method. Unfortunately, this means the internal copies that NSOutlineView is making do not have the image field, and it leads to the images briefly vanishing during expand and collapse operations. The objective-c code in question is: - (id)copyWithZone:(NSZone *)zone { ImageAndTextCell *cell = (ImageAndTextCell *)[super copyWithZone:zone]; // The image ivar will be directly copied; we need to retain or copy it. cell->image = [image retain]; return cell; } The first line is what's tripping me up, as MonoMac does not expose a copyWithZone method, and I don't know how to otherwise call it. Update Based on current answers and additional research and testing, I've come up with a variety of models for copying an object. static List<ImageAndTextCell> _refPool = new List<ImageAndTextCell>(); // Method 1 static IntPtr selRetain = Selector.GetHandle ("retain"); [Export("copyWithZone:")] public virtual NSObject CopyWithZone(IntPtr zone) { ImageAndTextCell cell = new ImageAndTextCell() { Title = Title, Image = Image, }; Messaging.void_objc_msgSend (cell.Handle, selRetain); return cell; } // Method 2 [Export("copyWithZone:")] public virtual NSObject CopyWithZone(IntPtr zone) { ImageAndTextCell cell = new ImageAndTextCell() { Title = Title, Image = Image, }; _refPool.Add(cell); return cell; } [Export("dealloc")] public void Dealloc () { _refPool.Remove(this); this.Dispose(); } // Method 3 static IntPtr selRetain = Selector.GetHandle ("retain"); [Export("copyWithZone:")] public virtual NSObject CopyWithZone(IntPtr zone) { ImageAndTextCell cell = new ImageAndTextCell() { Title = Title, Image = Image, }; _refPool.Add(cell); Messaging.void_objc_msgSend (cell.Handle, selRetain); return cell; } // Method 4 static IntPtr selRetain = Selector.GetHandle ("retain"); static IntPtr selRetainCount = Selector.GetHandle("retainCount"); [Export("copyWithZone:")] public virtual NSObject CopyWithZone (IntPtr zone) { ImageAndTextCell cell = new ImageAndTextCell () { Title = Title, Image = Image, }; _refPool.Add (cell); Messaging.void_objc_msgSend (cell.Handle, selRetain); return cell; } public void PeriodicCleanup () { List<ImageAndTextCell> markedForDelete = new List<ImageAndTextCell> (); foreach (ImageAndTextCell cell in _refPool) { uint count = Messaging.UInt32_objc_msgSend (cell.Handle, selRetainCount); if (count == 1) markedForDelete.Add (cell); } foreach (ImageAndTextCell cell in markedForDelete) { _refPool.Remove (cell); cell.Dispose (); } } // Method 5 static IntPtr selCopyWithZone = Selector.GetHandle("copyWithZone:"); [Export("copyWithZone:")] public virtual NSObject CopyWithZone(IntPtr zone) { IntPtr copyHandle = Messaging.IntPtr_objc_msgSendSuper_IntPtr(SuperHandle, selCopyWithZone, zone); ImageAndTextCell cell = new ImageAndTextCell(copyHandle) { Image = Image, }; _refPool.Add(cell); return cell; } Method 1: Increases the retain count of the unmanaged object. The unmanaged object will persist persist forever (I think? dealloc never called), and the managed object will be harvested early. Seems to be lose-lose all-around, but runs in practice. Method 2: Saves a reference of the managed object. The unmanaged object is left alone, and dealloc appears to be invoked at a reasonable time by the caller. At this point the managed object is released and disposed. This seems reasonable, but on the downside the base type's dealloc won't be run (I think?) Method 3: Increases the retain count and saves a reference. Unmanaged and managed objects leak forever. Method 4: Extends Method 3 by adding a cleanup function that is run periodically (e.g. during Init of each new ImageAndTextCell object). The cleanup function checks the retain counts of the stored objects. A retain count of 1 means the caller has released it, so we should as well. Should eliminate leaking in theory. Method 5: Attempt to invoke the copyWithZone method on the base type, and then construct a new ImageAndTextView object with the resulting handle. Seems to do the right thing (the base data is cloned). Internally, NSObject bumps the retain count on objects constructed like this, so we also use the PeriodicCleanup function to release these objects when they're no longer used. Based on the above, I believe Method 5 is the best approach since it should be the only one that results in a truly correct copy of the base type data, but I don't know if the approach is inherently dangerous (I am also making some assumptions about the underlying implementation of NSObject). So far nothing bad has happened "yet", but if anyone is able to vet my analysis then I would be more confident going forward.

    Read the article

  • jQuery returning two elements for each one it finds?

    - by John Rudy
    I'll start by saying I'm fairly new to jQuery. For the most part, I've found it intuitive and powerful, but this one circumstance has me thoroughly stumped. In the following method, the call to .each() returns two elements for every one found. It iterates over a set of table rows given IDs starting with the word, "communication," and followed by an ID number. For each row it returns, it processes twice. Using Firebug, I've validated that the DOM only has a single instance of each table row in question. Also using Firebug, I've validated that the method is not being called twice; the iteration in .each() is truly going over each returned table row twice. By the time all the AJAX call goodness is done, I'll have two entries in the database for each row created in the table. This is the code that's causing the issues: function getCommunications() { var list = $('[id^=communication]'); var communications = new Array(); list.each(function () { var communication = { ID: $(this).find('.commCompanyID').val(), /* * SNIP: more object properties here that are * unnecessary to this discussion */ }; communications.push(communication); }); return communications; } At the point of return communications, the Array returned will contain twice as many elements as there are table rows. I should note that nearly identical code (but going against specific lists of divs) is working on the same page. It's just the table that's suffering the issues. I'm using jQuery 1.4.1, the version which shipped with Visual Studio .NET 2010. The table markup is fully dynamic -- that is, aside from the header row, it's dependent on data either returned at page load or created by the user via a dialog box. I'll drop in just the code for what's created at page load; again using Firebug I've validated that what I create dynamically when an end user creates a row with the dialog box matches. (This should be readable by anyone, but for the record this is an ASP.NET MVC 2.0 project.) <table id="commTable"> <tr> <th></th> <th> Date / Time </th> <th> Contact </th> <th> Type </th> <th> Duration </th> <th> Notes </th> </tr> <% foreach (var item in Model) { %> <tr id="communication<%: item.ID %>"> <td> <a href="#" onclick="showEditCommunicationForm(<%: item.ID %>"> Edit</a> <span class="commDeleteButton"> <a href="#" onclick="deleteCommunication(<%: item.ID %>)"> Delete</a> </span> </td> <td> <span class="commDateTime"><%: item.DateTime %></span> <input type="hidden" class="commID" value="<%: item.ID %>" /> <input type="hidden" class="commIsDeleted" value="<%: item.IsDeleted %>" /> </td> <td> <span class="commSourceText"><%: item.Company.CompanyName %></span> <input type="hidden" class="commCompanyID" value="<%: item.CompanyID %>" /> </td> <td> <%: item.CommunicationType.CommunicationTypeText %> <input type="hidden" class="commTypeID" value="<%: item.CommunicationTypeID %>" /> </td> <td> <span class="commDuration"><%: item.DurationMinutes %></span> Minutes </td> <td> <span class="commNotes"><%: item.Notes %></span> </td> </tr> <% } %> </table>

    Read the article

< Previous Page | 130 131 132 133 134 135 136 137 138 139  | Next Page >