Search Results

Search found 4248 results on 170 pages for 'adsl router'.

Page 135/170 | < Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >

• Using a Dell PowerConnect to set up load balancing/redundancy, 1 switch 2 routres 2 private wan link

  - by MarianoC

  Hi, We have different locations connected by two different WAN providers. Each site has a dell powerConnect 6224 and two cisco routers with the WAN connections (we don’t have access to router admin). The 6224 connects to each cisco LAN port and to our LAN backbone. We would like the 6224 provide the ip gateway address and load balance and support redundancy, if one of the routes fail. Is this possible?. We can't find any samples on doing this and we have tried with no success. Any help or link to documentation regarding this, will be greatly appreciated. Thanks, MarianoC

  Read the article

• Unable to access internet if wireless enabled

  - by balki

  The following is my route output. eth0 is my wired network and eth1 is my wireless network. Only wired one has access to internet. If I enable wireless, I am not able to access internet, it tries to access via eth1 and I get 404 page of the wireless router. Why does eth1 have higher preference though default is eth0 (link)? [balakrishnan@mylap ~]$ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.26.0.1 0.0.0.0 UG 0 0 0 eth0 10.26.0.0 * 255.255.192.0 U 1 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 eth0 192.168.1.0 * 255.255.255.0 U 9 0 0 eth1

  Read the article

• Squeezebox server on Mac OS 10.6

  - by jonathancaryl

  I want to run Squeezebox server on my Mac running OS 10.6 Snow Leopard. The Firewall settings on 10.6 now let you speciy by Application things that are allowed to connect through the firewall. But Squeezebox server isn't an application, so I can't select it. If I turn the firewall off, it works fine. This is a reasonable step for a desktop (as it's always connecting to the 'net through the router's firewall) but on a laptop that connects via public WiFi it doesn't seem like a good idea. Help!

  Read the article

• Remote access to a KVM Ubuntu virtual server

  - by Lee

  I've just setup an ubuntu virtual server and everything seems to be working fine. I used KVM to get it working with a bridged network. I've given the virtual server a static ip address on my network. I don't seem to be able to connect to the virtual machine though from outside my network. If I'm on my own network it all works fine, I can ping the ip and connect to it. The virtual server can ping other machines and sites on the internet. I changed the port forwarding rules on my router to forward any connections on a specific port to the virtual server ip address thinking that was the problem, but it was still the same. Is there something I'm missing here which is blocking outside connections to the virtual machine? Thanks.

  Read the article

• Suggestion of device WiFi range in it's spec. Possible?

  - by SeeR

  I have router Draytek Vigor 2100VG at home almost in the center of it. The farthest point at my home is my balcony, ~12m from it. I have constant wifi signal range problems with some of my devices, but not with others. Notebook Lenovo W510 - no problems Nokia Home Music - always on 10m - no problems Sony PS3 - always on 7m - no problems Sony tablet S - problems around 6m Sony PSP - problems around 8m Sony PS Vita - problems around 8m Nokia E63 - problems around 8m I'm curious why my Notebook don't have any problems even on the balcony? I guess it has better hardware or uses more power for transmission. This information is really important when you want to buy new device/computer, so my real question is: Can device wifi range can somehow be found/suggested from official hardware technical specification? If not Is there some web page with wifi range reviews?

  Read the article

• Remove a known network from Windows 8

  - by Edward Brey

  When Windows 8 detects a network based on the assigned IP address, netmask, default gateway, etc., it remembers the network along with the setting you give it as a public or private network. If you change the configuration of a network (e.g. reconfigure your router), Windows may determine you are on a new network and assign it a name of Network 2 or YourAPN 2. This less-than-friendly name shows up in many places in the Windows 8 UI, but unlike the good old days of Windows 7, there doesn't appear to be any UI to merge or delete these networks. What's the best way to merge or delete networks you don't want?

  Read the article

• Connect iPad to windows 7 VPN

  - by Linuz

  My iPad keeps spitting out the error: "A connection could not be established to the PPP server." I am trying to connect it to a VPN I set up with Windows 7 as an incoming connection. On the iPad, I went into the VPN settings, added a new PPTP VPN with the following information Server: Windows 7 Computer's IP RSA SecurID: OFF Account: Account Username Password: Account Password Encryption Level: Auto Send All Traffic: ON Proxy: Off Now I know that it is making some connection to the Windows 7 Computer because whenever I intentionally put in the wrong VPN password on the iPad, it makes me put in the correct one before trying to connect again. All the ports are forwarded on my router for PPTP, and my Windows 7 Firewall is even off to try to get this to work. Any help would be greatly appreciated, thanks.

  Read the article

• Domain redirection to port on Windows Server 2008

  - by Rauffle

  I have a Windows server running IIS. I wish to run a piece of software that hosts a web interface on a non-standard HTTP port (let's say, port 9999). I have static DNS entries on my router for two FQDNs, both of which direct to the Windows server. I wish to have requests to 'website1' to continue to go to the IIS website on port 80, but requests for 'website2' to instead go to port 9999 to be handled by the other application. How can I accomplish this? Right now I can get to the application by going to 'website1:9999' or 'website2:9999'.

  Read the article

• I'd like to archive files from Ubuntu to Windows between two computers on a shared home network

  - by Wabbitseason

  I have an old laptop running Ubuntu 9.10 which I use as a LAMP environment for web development, and I have a comfortable, powerful desktop computer with Windows 7 installed on it. These two are connected to a home router so both can access the internet. I have been able to set up Samba so I can mount my Apache home directory so it is accessible from Windows and is mapped as a network drive. What I'd like to do is access some Windows folders from Linux so I could automatically create backups (with cron scripts) of my work to physically different locations on the Windows box. Perhaps at a later time I'd set up a local Subversion repository but I'd love to keep backups of that on the Windows drives too. Using Ubuntu's Places/Network menu I can see my desktop but I'm unable to log in to that despite having created the corrent username and password on Windows. All I can get is the following error message: "Unable to mount location. Failed to retrieve share list from server." What could be misconfigurated?

  Read the article

• Linux Mint on VirtualBox has no internet connection

  - by Martin

  Physical machine: Mac Mini running OSX 10.7.5 Virtual machine: Linux Mint 15 Cinnamon 64-bit Using VirtualBox. I am trying to make the linux connect to the internet. For some reason I can access the host computer with 192.168.2.100. Its set up to show me a web-page that says "It works". This I can see from the linux. But I cannot reach anything on the internet. Either FireFox says "Unable to connect" or when I run nslookup google.com I get connection timed out; no servers could be reached. My setting on VirtualBox under the Network tab are: Bridge Adapter vnic0 promiscouos Mode:Allow All`. If it makes a difference, the host has a WiFi connection to the home router. What have I missed?

  Read the article

• Broadcasted networks appear cached with netsh? [on hold]

  - by Joe

  We have a company mandate to hide certain windows functions. I'm working on a company application which will allow my users to configure WiFi networks. The app is scanning broadcasted networks using: "netsh wlan show networks" it will return networks that have been turned off. For example: I will run the command and then unplug my wireless router with the SSID "Netgear". For several minutes after turning off the network, the show networks command will continue to return "Netgear". Does anyone know where this gets cached, how to clear it out, or how to force a fresh scan of "netsh wlan show networks"? Thanks all, J

  Read the article

• Why can't I connect to a wifi network with my laptop, when I can with my phone?

  - by Alex Sf.

  I can connect with my phone and use the browser as usual. On my laptop it won't connect when using windows 7 while in ubuntu it will connect, but with no internet. What is going on here and how can I get internet on my laptop ? [edit] It's a public wifi hotspot. I can connect with no issues at home. My network asapter is: Atheros AR5B97. And my phone is an iPhone 3G. The wizard's of no help since it asks me to check the router, which I can't since it's a public hostspot.

  Read the article

• Run a server and local wireless network off my laptop with no internet.

  - by greg

  I'm trying to run a wireless network from my computer so that people in range can connect to the network and hit a website running off my machine. I don't want to enable file sharing or remote access or anything else of that nature. I just want them to be able to connect to the network, type in an IP or domain name in a browser, and be taken to a locally hosted website. No broader internet access needed. Any ideas / links to good tutorials on the subject? Is this something i can achieve with just a wifi card or will need a router?

  Read the article

• latency, regular alternations. Pfsense, network

  - by Tillebeck

  Any idea why grapgh is a shown? It i two pfsense boxes and I have not looked into where they ping to and if it is related to the server they ping. Trafic graphs are following a normal 24 hour cycle and not related to either of the latency graphs Img1: High frequent ulteration in latency. Just started a few days back. Peaks are not perfectly regular but varies from 40min to 1hour Img2: This is a different router on another internet connection. Most of our routers shown this kind of latency graphs - so for our setup it is "normal". Please note that second graph is for a whole week and not just some hours

  Read the article

• Accessing locally hosted webpage via public IP

  - by Mk12

  Sorry if this is in the wrong place.I don't really know anything about server-related things, but I'm really curious about this. On my mac I figured out how to make a simple web page viewable via the local ip address or computer name on the LAN, and also how to hook it up with a free hostname from dyndns.com. So the dyndns hostname points to something, how can I access it directly? Typing in the global ip address (of the router) doesn't work, but if it did, how would it know which computer to point to? There must be some way of directly accessing what dyndns hostname points to by typing in some number, right? Sorry I don't really understand how it works.

  Read the article

• Web server suddenly stopped working

  - by wezten

  I have a web server, which was working fine. It also was an FTP server and a Windows Remote Desktop server, all working fine. Someone called our ISP to increase the internet speed, and suddenly nothing works - I can connect with Teamviewer, but HTTP, FTP & RD doesn't work. Disabled firewall. Ran Wireshark - the packets don't come through at all. Set the webserver to port 20111, in case the ISP is blocking port 80, and again, the packets didn't come through at all. (localhost:20111 works fine) Port forwarding is set up for ports 80, 21, 3389 & 20111 to 10.0.0.32 (which is the correct address - checked with ipconfig). Restarted router and computer. I would be very grateful for any help.

  Read the article

• Failover NIC with Windows 7 running Apache Server

  - by Benjamin Jones

  I have a Apache Server running on a Windows 7 Desktop for a internal website (Intranet). I am trying to figure out how I can make this system as failover safe as possible. One thing I want to do is use the 2nd NIC card that is currently disable. I only have one gateway address to my router. I do not have any computer running a Server O/S. If NIC1 crashes by chance(just humor me!), how could NIC2's IP take on the host name (I have mapped in host file) . I don't really care if the static IP of NIC2 changes seeing that the host name is the only thing I need. Could I add two IP's to the host file, with same host email and maybe create some script that will run IF NIC 1 fails? OR is there any failover software that will do this for me?

  Read the article

• How can I connect to some old Sun servers?

  - by hellsgate

  We have some old Sun servers (V125, V210, V240, T2000 amongst others) sitting unused and I've been asked to find out if there is anything useful on them before they get wiped and disposed of. However, I've been unable to connect to any of the servers. I tried connecting the servers to a router using the Net Management, Serial Management and standard Ethernet ports. When doing this, I ran 'nmap -sP' from my Linux desktop before and after connecting a server so I could compare the two outputs and hopefully work out what IP address had been assigned to the server, but it didn't appear to have received one. Unfortunately only one of the servers has a VGA output. I was able to access this machine as we still have the login details stored in KeePass, but I've no idea at the moment on how I should go about connecting to any of the others. Any suggestions?

  Read the article

• Access device with local ip over internet

  - by Joe Perrin

  I apologize up front if this is the wrong place to post this question. It seemed like the best fit. I have a device which is connected to my local network which has an IP of 192.168.1.10 from my router. Additionally I use a Windows 7 machine that runs some software called DirectUpdate which allows me to resolve the local IP of the Windows 7 machine (192.168.1.5) to be accessible to the internet via my domain (example.com) - Basic dynamic DNS updating. I'd like to access the device from example.com. I am unsure how to do this as I don't have any way to install DirectUpdate (or any software) on the device to make the device available to the internet. Any insight here would be appreciated. Thank you.

  Read the article

• L2TP Site to Site VPN issues

  - by Chris Lively

  I have a windows 2008 r2 server that needs to establish a VPN connection to a remote VPN server. We're using the L2TP protocol with a pre-shared key. I initially used the New Demand Dial interface wizard. Then I went into properties on the interface and set the type of VPn to L2TP/IPSec and put the key under the advanced settings. The error I received when attempting to connect is: An error occured during connection of the interface. A Demand Dial Router attempted to connect over a port that was reserved for Remote Access Clients only.

  Read the article

• Automatically reboot Windows8 if no internet activity

  - by GrapeCamel

  I have a media server located in a very inconvenient part of my house. Occasionally I will have to reset my router or it will reset itself. The issue is the PC loses connectivity for some reason, and I am forced to walk outside, around the house, into the basement, over a bunch of toys and weights and boxes, to push a button to reboot it. I would love to have it check itself every 5-10 minutes and auto reboot if it is unable to ping a given address/IP. Any ideas how to accomplish this?

  Read the article

• 'DNS service isn't responding' in windows 7

  - by pradeeptp

  Hi All, I bought a brand new Dell Studio 1558 just last week. It has windows 7 home premium 64-bit installed on it. My friend who is occupying the adjacent room has a laptop with windows XP. Both of us are connecting to the same wireless router of the hotel. My friend is able to connect to the wireless network without any trouble, but when I try to connect, I get the error "DNS service isn't responding". I met two more people in the same hotel with win XP laptop and they too dont have any problem. I have gone to possibly all the forums and website but I haven't been able to fix this error :(. I have done all the basic troubleshooting but I have no luck yet. Pls help. Following is one forum where the problem seem to have been trouble shooted but not for all. http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/eeb84518-903d-46d1-9398-80cf211878d7

  Read the article

• Is there a way to share a scanner with an Airport Extreme?

  - by Electrons_Ahoy

  I've got an Airport Extreme as my home network's router. (Sidebar: I love it.) The printer sharing is pretty phenomenal - I've got my printer hooked up to the base station and all the machines in the house can print to it just fine. However, I have one of those combined scanner/printers, and nothing on the lan seems to be able to see the scanner. Is there a way to get the Airport Extreme / Bonjour to also share the scanner half of the device? For the record, this is an all Windows LAN, so I'm using Bonjour for Windows to get the print sharing to work. Also, I'm hoping to not add a whole stack of extra software to the ecosystem - only one machine in the house needs the scanner, so I can just plug the printer back into that machine and share the printer that way. Still, the Airport and Bonjour seem fancy enough that this seems like it should be doable.

  Read the article

• Question regarding IPv6 - Solicited-Node Address with a Link local scope

  - by Pulse

  Situation: A small LAN comprising a Windows 7 Ultimate x54 PC, 2 XP Pro x86 PCs and an Asus router.The Win 7 box has IPv6 enabled. There are no other IPv6 enabled devices on the LAN. In my firewall I see numerous requests originating from the Win 7 PC, which are for the Multicast address ff02::1:ff.... which is a Solicited-Node address query and has a scope of 2 which equates to the local link. As far as I knew local link addresses are filtered by routers, hence local link. Given that situation I'm wondering why I'm seeing these queries being generated to various addresses? Any ideas? Thanks.

  Read the article

• Can't set up Usermin correctly to allow users to login outside of local network, what am I missing?

  - by thecraic

  I'm fairly new at creating a server, but the biggest problem I am currently having at the moment is getting Usermin set up to be accessible from outside the LAN. I talked to other people that use it and was told that all I need to do is type the url:20000 to access the login screen, but that doesn't work. I have also tried the ip:20000 and that doesn't lead to anything. Instead I get the error message: Error - Bad Request This web server is running in SSL mode. Try the URL https://hostname:10000/ instead. (where hostname is my server's hostname) I know it must be a configuration issue, but I have checked all my settings and as far as I can tell I don't have the ports blocked anywhere. I have the correct ports forwarded on my router and my server firewall doesn't have the port block either. Is there anything I am missing? Any help would be appreciated and I will add more information upon request. Thank You.

  Read the article

< Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >