Search Results

Search found 8193 results on 328 pages for 'dev ray'.

Page 135/328 | < Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >

• Is Joerg Schilling’s “sdd” a full replacement for “dd”

  - by fishtoprecords

  I was directed to post here, I started on Stackoverflow.... I'm trying to use 'sdd' on my Debian system, and can't get one set of options to work. They do work in 'dd' so I am wondering if I am specifying them incorrectly, or if sdd didn't implement them, or something else. What I want to do is sdd if=/dev/hdh1 of=/bay5/imagebay1 bs=4096 conv=sync,noerror if I leave out the "conv=..." option, it works, or at least starts copying data. sdd if=/dev/hdh1 of=/bay5/imagebay1 bs=4096 Can you shed a bit of light?

  Read the article

• How to run long time process on Udev event?

  - by neclude

  (sorry for my bad english) I want run ppp connection when my usb modem is connect. so i use next udev rule: ACTION=="add", SUBSYSTEM=="tty", ATTRS{idVendor}=="16d8",\ RUN+="/usr/local/bin/newPPP.sh $env{DEVNAME}" (my modem appear in /dev as ttyACM0) newPPP.sh: #!/bin/bash /usr/bin/pon prov $1 >/dev/null 2>&1 & Problem: udev event fire, newPPP.sh running, BUT newPPP.sh process will be killed after ~4-5s. ppp not have time to connect. (in it params is timeout 10s for dial up). How can i run long time process, that will not be killed? (I was try nohup. It don't work too.) System: Arch Linux

  Read the article

• Unreadable sectors reported by smartd, is it serious?

  - by stribika

  I have a RAID 5 array of 4 disks. In the last 2 days I began to see these messages in the log: Jun 13 23:01:05 localhost smartd[4537]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors Jun 13 23:01:05 localhost smartd[4537]: Device: /dev/sdb [SAT], 2 Currently unreadable (pending) sectors If I have 2 faulty disks then the array should not show all disks OK: md0 : active raid1 sdd1[3] sdb1[1] sdc1[2] sda1[0] 64128 blocks [4/4] [UUUU] Strangely there are no other problems just the log messages. I am worried because sda is new and I previously had problems with sdb. (Completely died but the guy who sold it to me fixed it somehow.) Am I in danger of losing data? What should I do now?

  Read the article

• Keeping the wireless connected.

  - by casr

  I’m running OpenBSD on a computer which is connected via wireless to the network. It is a well supported NIC and I’ve had no problems with it from a hardware perspective. Unfortunately my wireless access point occasionally loves to forget it’s settings. I then have to help it remember. However, in this intervening time my OpenBSD box drops the connection and then does not automatically reconnect. I have alleviated my problems by running this simple script in the background: #!/bin/sh while [ 1 ] do ping -c1 192.168.1.254 > /dev/null if [ $? = 1 ] then sh /etc/netstart ral0 > /dev/null fi sleep 30 done [Ping the access point. If there is no response attempt to reconnect.] It seems to me to be a very suboptimal solution. Has anyone else come across a better way?

  Read the article

• Recover partition table after DD command

  - by Shreedhar

  I executed the following command from a Ubuntu live cd terminal (dont ask why). dd if=/dev/zero of=/dev/sdb2 bs=512 count=1 Where sdb2 is a NTFS partition (third partition) on a disk. Suffice to say it is now messed up. When I boot into windows 7, it does show me E drive but when I click on it it asks me to format it. I am not ever sure what I did, did I mess up partition table or only the MFT? Is there any way to get the data back PLEASE HELP! this is very important :(

  Read the article

• Linux virtual disk stripping or multi-path samba share?

  - by wachpwnski

  I am trying to build a file storage box for media. It needs to span two or more directories or partitions as one share. There are a few solutions but reasons why I want to avoid them, among these are: Using LVM2 for stripping. I don't really have the resources to back up everything on the volumes incase one HDD goes south. I would end up loosing everything. Maybe there is a better option for this to prevent data loss with hot swappable drives or some kind of raid. Using symbolic links in the share. This will get tedious every time a new sub-directory is added. Is there some kind of software raid I can use to merge two directories virtually? I am aware of the issue where /dev/hda1/media/file.1 and /dev/hdb1/media/file.1 both exist. But I'm sure there are some creative solutions for this.

  Read the article

• Make user uploads go to different hard drive?

  - by Andrew Fashion

  I am using a pre-made social networking script where all user uploads go to site.com/public/user/ How can I make /public/user/ my secondary hard drive so all user uploads are uploaded to my second harddrive and not the primary hard drive. I have over 100GB of images, and I want them on my other HDD now. Thank you. I am running CentOS 5.5 64bit w/ Apache and PHP I have two 250GB Sata HDDs sudo parted /dev/sda print Model: ATA WDC WD2500KS-00M (scsi) Disk /dev/sda: 250GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 107MB 107MB primary ext3 boot 2 107MB 8595MB 8488MB primary linux-swap 3 8595MB 10.7GB 2147MB primary ext3 4 10.7GB 250GB 239GB extended 5 10.7GB 250GB 239GB logical ext3 Information: Don't forget to update /etc/fstab, if necessary. 5 10.7GB 250GB 239GB logical ext3

  Read the article

• Setting up proxy to handle subdomain requests

  - by PeeHaa

  I have setup a proxy for a site which works with the following nginx config: server { listen 80; server_name proxy.example.com; access_log /dev/null; error_log /dev/null; location / { proxy_pass http://thepiratebay.se; proxy_set_header X-Real-IP $remote_addr; } } However on this there are also styles loaded from a subdomain (static.thepiratebay.se) which aren't going through my proxy, because it links to the original domain. Is there a way to also let those requests go to my proxy? Do I have to change the contents of the pages when serving it to let them also go through my proxy? If so: how? :) Or is there another (perhaps better) way?

  Read the article

• After creating a mysql user with all privileges, the user cannot create databases in phpMyAdmin and only sees information_schema table

  - by GHarping

  This is a recurring problem for some reason... Using mysql 5.5, I am simply trying to create a user that can connect to the database remotely, have access to all databases, and create databases. I have created a user using: create user 'dev'@'%' identified by 'abcdefg'; then granted all permissions using: GRANT ALL ON *.* to 'dev'@'192.168.%' IDENTIFIED BY 'abcdefg' WITH GRANT OPTION; and the result is that the user cannot create databases, and can only see information_schema database for some reason. Databases Create database: Documentation No Privileges Database Ascending information_schema Total: 1 Does anyone know why this might be happening?

  Read the article

• redirect output from dd command

  - by laks

  How to redirect output from dd command to /dev/null ?

  Read the article

• Virtual Box start from dual boot systme

  - by Richard

  So for a long time now, I've been running Linux on a dual boot system with Windows 7. I don't run Windows very often, however it happens enough now that I started looking at alternatives to reboots. A friend showed me Parallels on his Mac, and I fell in love with the concept of Virtual machines. Since Sun has been in the Unix space since the beginning of time, they likely have the best solution for Linux (big assumption I know). Anyway, to avoid re-installing windows, as I have it set up the way I like it now, I was wondering if there was a way to point to the existing install and boot from that point. Linux is installed on /dev/sda Windows is on /dev/sdb Having never done this before a little handholding would be great as to what step I should take. Thanks for any help in advance!

  Read the article

• creating a subdomain on windows server

  - by jason

  Hi I'm trying to set up a sub domain for development on a windows server and am having problems setting the correct details in the httpd.ini file and hoped soemone could help. I have set up the subdomain http:// dev. website .com The files that I want to use for this subdomain are on the server in a folder called development http:// www. website .com /development in the directory structure they are in /htdocs/development What do I need to add the the httpd.ini file to point the http:// dev .website .com to file files located in the /htdocs/development folder on the server? Many Thanks

  Read the article

• Upgraded to Mountain Lion, now 127.0.0.1 is not resolving

  - by Shanimal

  I used to be able to type 127.0.0.1 (or my network IP 10.10.53.32) and it would resolve to my "default" virtual host. 127.0.0.1/~Shanimal and shanimal.dev both resolve to their appropriate folders. localhost and 127.0.0.1 give me a 404 - "Not Found The requested URL / was not found on this server." Basically, my "It works!" screen no longer works. /private/etc/apache2/Shanimal.conf: <Directory "/Users/Shanimal/Sites/_www"> Options Indexes Multiviews AllowOverride AuthConfig Limit Order allow,deny Allow from all </Directory> hosts: 127.0.0.1 localhost 127.0.0.1 shanimal.dev

  Read the article

• Pinned program on the taskbar is not grouping in Windows 7 Ultimate

  - by Magic

  Previously, I had pinned Google Chrome Dev to the taskbar. Being that it was unstable and crashed frequently, I decided to uninstall it. Before uninstalling, however, I did not un-pin its icon from the taskbar. Afterward, I installed Google Chrome Stable and launched it from the old pinned icon. This resulted in a new icon appearing in the taskbar. I figured this happened because the icon was originally for the Dev build, so I unpinned the icon and re-pinned Google Chrome. I launch Google Chrome again, but I still get a new icon! Re-pinning the icon should have fixed it, no? Why aren't my Google Chrome windows grouping together?

  Read the article

• How should a small team using multiple OS's deploy over github?

  - by Toby

  We have a small development team that have recently moved to using github to host our projects. The team consists of three developers, 2 on Windows and 1 on Mac. I am currently researching the best way to deploy applications to our Linux servers (dev and production). Capistrano running locally would be ideal but from what I read this won't work for Windows machines. It looks like the best way is to use a post-receive hook in github, I can see how this would work for auto deploying to dev, but I don't see how we could then deploy to live. I have found paid projects like http://www.deployhq.com/ but it feels like something that a quick bit of code should be able to do for free, I just can't seem to get myself pointed in the right direction! I was wondering what would be considered best practice for small team deployment involving multiple local OS's and github.

  Read the article

• Use puppet to make changes to ip route and sysctl

  - by Quintin Par

  I have two changes to ip route & sysctl that disable tcp slow start. Here’s how I do it ip route show Make a note of the line starting with default. Pick up the IP from the default line and run sudo ip route change default via $ip_address dev eth0 initcwnd 12 sudo sysctl -w net.ipv4.tcp_slow_start_after_idle=0 How can I create a puppet script out of this? One that can be deployed to many machines of the same type – CentOS 6 Edit: Added bounty to get a working example for sudo ip route change default via $ip_address dev eth0 initcwnd 12

  Read the article

• Setting up central git repo on local Mac network

  - by Dashman

  We are a team of three, all working on our local machines on the same internal network. We will all be working on websites in local working copies of the same Git repo hosted on Github. We have an internal staging machine here (dev.internal), and I am looking for a way for us to be able to push to this machine. At each milestone in the development cycle. In essence, all I really want us to be able to do is add the dev.internal machine as a remote, and push to this whenever we are ready. Could somebody please point me in the right direction to get this set up?

  Read the article

• Has anyone found a (eg bash) shell terminal for Windows as good as the OS X one?

  - by Anentropic

  I am mostly using 'git-bash' which came with the Windows install of Git vcs. I think it is the same one that comes with Cygwin. It works fine technically but the UI sucks: have to right-click the title bar and go to Properties to change the window width most annoyingly... copy and paste and highlight with the mouse are equally cumbersome In contrast, the Terminal app that comes with OS X manages these with aplomb and makes it so much more comfortable to work with. You can even drag and drop a file on it and it will paste the file path in at your cursor! I have also tried: http://sourceforge.net/projects/win-bash http://www.steve.org.uk/Software/bash/ http://www.hamiltonlabs.com/cshell.htm None of these do copy and paste of text without cumbersome right-clicking. I am specifically looking for a Unix-flavoured shell in Windows so I don't have to use different shells between my home dev (Windows), the live server (Linux) or dev at the office (Mac). Yes I have Googled and haven't found one yet...

  Read the article

• Use `dd` linux program to save / recover a disk's MBR

  - by Graduate

  I have an Ubuntu OS installed on my laptop. I want to install Windows 7 as well to another disk partition (I will do it by recovering it from a special partition on my laptop). After installing Windows, I want to recover my hard drive MBR to be able to load Ubuntu. I have a plan to use linux dd program: 1) (Before installing, perform this command in Linux) dd if=/dev/sda of=/home/user/mbr_backup bs=512 count=1 2) (after installing, load Ubuntu Live CD and launch this) dd if=/home/user/mbr_backup of=/dev/sda bs=512 count=1 3) Load Ubuntu on PC and re-configure the GRUB2 to be able start Windows I need your advice, I want to be sure I won't damage the disk (it's partition table).

  Read the article

• Ubuntu USB flash boot drive gets spontaneous "Unhandled sense code" error and causes drive to switch to Write protected

  - by Steve

  What happens is that the system runs fine for several days or even a week and then suddenly the root file-system / goes read-only. Looking at the syslog it shows that there was an 'Unhandled sense code'. This is under Ubuntu 10.04 but I saw the same thing with Ubuntu 9 with different flash media. /dev/sdg1 on / type ext4 (rw,errors=remount-ro) Jun 26 08:50:04 host1 kernel: [926247.565090] sd 5:0:0:0: [sda] Unhandled sense code Jun 26 08:50:04 host1 kernel: [926247.565094] sd 5:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jun 26 08:50:04 host1 kernel: [926247.565098] sd 5:0:0:0: [sda] Sense Key : Data Protect [current] Jun 26 08:50:04 host1 kernel: [926247.565103] sd 5:0:0:0: [sda] Add. Sense: Write protected Jun 26 08:50:04 host1 kernel: [926247.565108] sd 5:0:0:0: [sda] CDB: Write(10): 2a 00 00 46 29 18 00 00 08 00 Jun 26 08:50:04 host1 kernel: [926247.565117] end_request: I/O error, dev sda, sector 4598040 Jun 26 08:50:04 host1 kernel: [926247.569788] Buffer I/O error on device sda1, logical block 574499 Jun 26 08:50:04 host1 kernel: [926247.574677] lost page write due to I/O error on sda1

  Read the article

• iSCSI logout Input output error

  - by liuzhijun

  203 hava a iSCSI target named poolA that I am trying to log into using this command: iscsiadm -m node -T poolA -p 192.168.0.203 -l I am trying to use it as a vg. Secondly, I create two lvs on this vg, and lastly, I logout: iscsiadm -m node -T poolA -p 192.168.0.203 -u After I execute lvs, the following error occurs: /dev/dm-2: read failed after 0 of 4096 at 0: Input/output error /dev/dm-5: read failed after 0 of 4096 at 0: Input/output error Can I get around this error without a reboot? Thanks!

  Read the article

• Possible to run system-config-network during %post kickstart?

  - by tore-

  Hello, I'm currently trying to figure out a smart way to set IP, hostname, gateway and DNS settings during a kickstart (with user input during the kickstart). Doing this with firstboot after the install is not acceptable, so this must be done during %post. I've tried to run the system-config-network tool during post in tty6: #!/bin/sh chvt 6 exec < /dev/tty6 > /dev/tty6 /usr/bin/system-config-network-tui This doesn't work since for some reason I'm unable to catch user input. I would prefer to use built in tools to change this during post, rather than write my own bash script to do this, since using the provided tools is less likely to break anything. Does someone done anything like this or similar, and made it work? Thanks

  Read the article

• External HDD USB 3.0 failure

  - by Philip

  [ 2560.376113] usb 9-1: new high-speed USB device number 2 using xhci_hcd [ 2560.376186] usb 9-1: Device not responding to set address. [ 2560.580136] usb 9-1: Device not responding to set address. [ 2560.784104] usb 9-1: device not accepting address 2, error -71 [ 2560.840127] hub 9-0:1.0: unable to enumerate USB device on port 1 [ 2561.080182] usb 10-1: new SuperSpeed USB device number 5 using xhci_hcd [ 2566.096163] usb 10-1: device descriptor read/8, error -110 [ 2566.200096] usb 10-1: new SuperSpeed USB device number 5 using xhci_hcd [ 2571.216175] usb 10-1: device descriptor read/8, error -110 [ 2571.376138] hub 10-0:1.0: unable to enumerate USB device on port 1 [ 2571.744174] usb 10-1: new SuperSpeed USB device number 7 using xhci_hcd [ 2576.760116] usb 10-1: device descriptor read/8, error -110 [ 2576.864074] usb 10-1: new SuperSpeed USB device number 7 using xhci_hcd [ 2581.880153] usb 10-1: device descriptor read/8, error -110 [ 2582.040123] hub 10-0:1.0: unable to enumerate USB device on port 1 [ 2582.224139] hub 9-0:1.0: unable to enumerate USB device on port 1 [ 2582.464177] usb 10-1: new SuperSpeed USB device number 9 using xhci_hcd [ 2587.480122] usb 10-1: device descriptor read/8, error -110 [ 2587.584079] usb 10-1: new SuperSpeed USB device number 9 using xhci_hcd [ 2592.600150] usb 10-1: device descriptor read/8, error -110 [ 2592.760134] hub 10-0:1.0: unable to enumerate USB device on port 1 [ 2593.128175] usb 10-1: new SuperSpeed USB device number 11 using xhci_hcd [ 2598.144183] usb 10-1: device descriptor read/8, error -110 [ 2598.248109] usb 10-1: new SuperSpeed USB device number 11 using xhci_hcd [ 2603.264171] usb 10-1: device descriptor read/8, error -110 [ 2603.480157] usb 10-1: new SuperSpeed USB device number 12 using xhci_hcd [ 2608.496162] usb 10-1: device descriptor read/8, error -110 [ 2608.600091] usb 10-1: new SuperSpeed USB device number 12 using xhci_hcd [ 2613.616166] usb 10-1: device descriptor read/8, error -110 [ 2613.832170] usb 10-1: new SuperSpeed USB device number 13 using xhci_hcd [ 2618.848135] usb 10-1: device descriptor read/8, error -110 [ 2618.952079] usb 10-1: new SuperSpeed USB device number 13 using xhci_hcd [ 2623.968155] usb 10-1: device descriptor read/8, error -110 [ 2624.184176] usb 10-1: new SuperSpeed USB device number 14 using xhci_hcd [ 2629.200124] usb 10-1: device descriptor read/8, error -110 [ 2629.304075] usb 10-1: new SuperSpeed USB device number 14 using xhci_hcd [ 2634.320172] usb 10-1: device descriptor read/8, error -110 [ 2634.424135] hub 10-0:1.0: unable to enumerate USB device on port 1 [ 2634.776186] usb 10-1: new SuperSpeed USB device number 15 using xhci_hcd [ 2639.792105] usb 10-1: device descriptor read/8, error -110 [ 2639.896090] usb 10-1: new SuperSpeed USB device number 15 using xhci_hcd [ 2644.912172] usb 10-1: device descriptor read/8, error -110 [ 2645.128174] usb 10-1: new SuperSpeed USB device number 16 using xhci_hcd [ 2650.144160] usb 10-1: device descriptor read/8, error -110 [ 2650.248062] usb 10-1: new SuperSpeed USB device number 16 using xhci_hcd [ 2655.264120] usb 10-1: device descriptor read/8, error -110 [ 2655.480182] usb 10-1: new SuperSpeed USB device number 17 using xhci_hcd [ 2660.496121] usb 10-1: device descriptor read/8, error -110 [ 2660.600086] usb 10-1: new SuperSpeed USB device number 17 using xhci_hcd [ 2665.616167] usb 10-1: device descriptor read/8, error -110 [ 2665.832177] usb 10-1: new SuperSpeed USB device number 18 using xhci_hcd [ 2670.848110] usb 10-1: device descriptor read/8, error -110 [ 2670.952066] usb 10-1: new SuperSpeed USB device number 18 using xhci_hcd [ 2675.968081] usb 10-1: device descriptor read/8, error -110 [ 2676.072124] hub 10-0:1.0: unable to enumerate USB device on port 1 [ 2786.104531] xhci_hcd 0000:02:00.0: remove, state 4 [ 2786.104546] usb usb10: USB disconnect, device number 1 [ 2786.104686] xHCI xhci_drop_endpoint called for root hub [ 2786.104692] xHCI xhci_check_bandwidth called for root hub [ 2786.104942] xhci_hcd 0000:02:00.0: USB bus 10 deregistered [ 2786.105054] xhci_hcd 0000:02:00.0: remove, state 4 [ 2786.105065] usb usb9: USB disconnect, device number 1 [ 2786.105176] xHCI xhci_drop_endpoint called for root hub [ 2786.105181] xHCI xhci_check_bandwidth called for root hub [ 2786.109787] xhci_hcd 0000:02:00.0: USB bus 9 deregistered [ 2786.110134] xhci_hcd 0000:02:00.0: PCI INT A disabled [ 2794.268445] pci 0000:02:00.0: [1b73:1000] type 0 class 0x000c03 [ 2794.268483] pci 0000:02:00.0: reg 10: [mem 0x00000000-0x0000ffff] [ 2794.268689] pci 0000:02:00.0: PME# supported from D0 D3hot [ 2794.268700] pci 0000:02:00.0: PME# disabled [ 2794.276383] pci 0000:02:00.0: BAR 0: assigned [mem 0xd7800000-0xd780ffff] [ 2794.276398] pci 0000:02:00.0: BAR 0: set to [mem 0xd7800000-0xd780ffff] (PCI address [0xd7800000-0xd780ffff]) [ 2794.276419] pci 0000:02:00.0: no hotplug settings from platform [ 2794.276658] xhci_hcd 0000:02:00.0: enabling device (0000 -> 0002) [ 2794.276675] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2794.276762] xhci_hcd 0000:02:00.0: setting latency timer to 64 [ 2794.276771] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2794.276913] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 [ 2794.395760] xhci_hcd 0000:02:00.0: irq 16, io mem 0xd7800000 [ 2794.396141] xHCI xhci_add_endpoint called for root hub [ 2794.396144] xHCI xhci_check_bandwidth called for root hub [ 2794.396195] hub 9-0:1.0: USB hub found [ 2794.396203] hub 9-0:1.0: 1 port detected [ 2794.396305] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2794.396371] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 10 [ 2794.396496] xHCI xhci_add_endpoint called for root hub [ 2794.396499] xHCI xhci_check_bandwidth called for root hub [ 2794.396547] hub 10-0:1.0: USB hub found [ 2794.396553] hub 10-0:1.0: 1 port detected [ 2798.004084] usb 1-3: new high-speed USB device number 8 using ehci_hcd [ 2798.140824] scsi21 : usb-storage 1-3:1.0 [ 2820.176116] usb 1-3: reset high-speed USB device number 8 using ehci_hcd [ 2824.000526] scsi 21:0:0:0: Direct-Access BUFFALO HD-PZU3 0001 PQ: 0 ANSI: 6 [ 2824.002263] sd 21:0:0:0: Attached scsi generic sg2 type 0 [ 2824.003617] sd 21:0:0:0: [sdb] 1953463728 512-byte logical blocks: (1.00 TB/931 GiB) [ 2824.005139] sd 21:0:0:0: [sdb] Write Protect is off [ 2824.005149] sd 21:0:0:0: [sdb] Mode Sense: 1f 00 00 08 [ 2824.009084] sd 21:0:0:0: [sdb] No Caching mode page present [ 2824.009094] sd 21:0:0:0: [sdb] Assuming drive cache: write through [ 2824.011944] sd 21:0:0:0: [sdb] No Caching mode page present [ 2824.011952] sd 21:0:0:0: [sdb] Assuming drive cache: write through [ 2824.049153] sdb: sdb1 [ 2824.051814] sd 21:0:0:0: [sdb] No Caching mode page present [ 2824.051821] sd 21:0:0:0: [sdb] Assuming drive cache: write through [ 2824.051825] sd 21:0:0:0: [sdb] Attached SCSI disk [ 2839.536624] usb 1-3: USB disconnect, device number 8 [ 2844.620178] usb 10-1: new SuperSpeed USB device number 2 using xhci_hcd [ 2844.640281] scsi22 : usb-storage 10-1:1.0 [ 2850.326545] scsi 22:0:0:0: Direct-Access BUFFALO HD-PZU3 0001 PQ: 0 ANSI: 6 [ 2850.327560] sd 22:0:0:0: Attached scsi generic sg2 type 0 [ 2850.329561] sd 22:0:0:0: [sdb] 1953463728 512-byte logical blocks: (1.00 TB/931 GiB) [ 2850.329889] sd 22:0:0:0: [sdb] Write Protect is off [ 2850.329897] sd 22:0:0:0: [sdb] Mode Sense: 1f 00 00 08 [ 2850.330223] sd 22:0:0:0: [sdb] No Caching mode page present [ 2850.330231] sd 22:0:0:0: [sdb] Assuming drive cache: write through [ 2850.331414] sd 22:0:0:0: [sdb] No Caching mode page present [ 2850.331423] sd 22:0:0:0: [sdb] Assuming drive cache: write through [ 2850.384116] usb 10-1: USB disconnect, device number 2 [ 2850.392050] sd 22:0:0:0: [sdb] Unhandled error code [ 2850.392056] sd 22:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 2850.392061] sd 22:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 2850.392074] end_request: I/O error, dev sdb, sector 0 [ 2850.392079] quiet_error: 70 callbacks suppressed [ 2850.392082] Buffer I/O error on device sdb, logical block 0 [ 2850.392194] ldm_validate_partition_table(): Disk read failed. [ 2850.392271] Dev sdb: unable to read RDB block 0 [ 2850.392377] sdb: unable to read partition table [ 2850.392581] sd 22:0:0:0: [sdb] READ CAPACITY failed [ 2850.392584] sd 22:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 2850.392588] sd 22:0:0:0: [sdb] Sense not available. [ 2850.392613] sd 22:0:0:0: [sdb] Asking for cache data failed [ 2850.392617] sd 22:0:0:0: [sdb] Assuming drive cache: write through [ 2850.392621] sd 22:0:0:0: [sdb] Attached SCSI disk [ 2850.732182] usb 10-1: new SuperSpeed USB device number 3 using xhci_hcd [ 2850.752228] scsi23 : usb-storage 10-1:1.0 [ 2851.752709] scsi 23:0:0:0: Direct-Access BUFFALO HD-PZU3 0001 PQ: 0 ANSI: 6 [ 2851.754481] sd 23:0:0:0: Attached scsi generic sg2 type 0 [ 2851.756576] sd 23:0:0:0: [sdb] 1953463728 512-byte logical blocks: (1.00 TB/931 GiB) [ 2851.758426] sd 23:0:0:0: [sdb] Write Protect is off [ 2851.758436] sd 23:0:0:0: [sdb] Mode Sense: 1f 00 00 08 [ 2851.758779] sd 23:0:0:0: [sdb] No Caching mode page present [ 2851.758787] sd 23:0:0:0: [sdb] Assuming drive cache: write through [ 2851.759968] sd 23:0:0:0: [sdb] No Caching mode page present [ 2851.759977] sd 23:0:0:0: [sdb] Assuming drive cache: write through [ 2851.817710] sdb: sdb1 [ 2851.820562] sd 23:0:0:0: [sdb] No Caching mode page present [ 2851.820568] sd 23:0:0:0: [sdb] Assuming drive cache: write through [ 2851.820572] sd 23:0:0:0: [sdb] Attached SCSI disk [ 2852.060352] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.076533] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.076538] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2852.196329] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.212593] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.212599] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2852.456290] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.472402] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.472408] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2852.624304] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.640531] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.640536] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2852.772296] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.788536] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.788541] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2852.920349] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.936536] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.936540] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2853.072287] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2853.088565] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2853.088570] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.176339] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2884.192561] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2884.192567] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.320349] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2884.336526] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2884.336531] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.468344] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2884.484551] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2884.484556] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.612349] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2884.628540] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2884.628545] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.756350] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2884.772528] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2884.772533] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.848116] usb 10-1: USB disconnect, device number 3 [ 2884.851493] scsi 23:0:0:0: [sdb] killing request [ 2884.851501] scsi 23:0:0:0: [sdb] killing request [ 2884.851699] scsi 23:0:0:0: [sdb] Unhandled error code [ 2884.851702] scsi 23:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 2884.851708] scsi 23:0:0:0: [sdb] CDB: Read(10): 28 00 00 5f 2b ee 00 00 3e 00 [ 2884.851721] end_request: I/O error, dev sdb, sector 6237166 [ 2884.851726] Buffer I/O error on device sdb1, logical block 6237102 [ 2884.851730] Buffer I/O error on device sdb1, logical block 6237103 [ 2884.851738] Buffer I/O error on device sdb1, logical block 6237104 [ 2884.851741] Buffer I/O error on device sdb1, logical block 6237105 [ 2884.851744] Buffer I/O error on device sdb1, logical block 6237106 [ 2884.851747] Buffer I/O error on device sdb1, logical block 6237107 [ 2884.851750] Buffer I/O error on device sdb1, logical block 6237108 [ 2884.851753] Buffer I/O error on device sdb1, logical block 6237109 [ 2884.851757] Buffer I/O error on device sdb1, logical block 6237110 [ 2884.851807] scsi 23:0:0:0: [sdb] Unhandled error code [ 2884.851810] scsi 23:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 2884.851813] scsi 23:0:0:0: [sdb] CDB: Read(10): 28 00 00 5f 2c 2c 00 00 3e 00 [ 2884.851824] end_request: I/O error, dev sdb, sector 6237228 [ 2885.168190] usb 10-1: new SuperSpeed USB device number 4 using xhci_hcd [ 2885.188268] scsi24 : usb-storage 10-1:1.0 Please help me with my problem. I got this after running dmesg.

  Read the article

• "const char *" is incompatible with parameter of type "LPCWSTR" error

  - by N0xus

  I'm trying to incorporate some code from Programming an RTS Game With Direct3D into my game. Before anyone says it, I know the book is kinda old, but it's the particle effects system he creates that I'm trying to use. With his shader class, he intialise it thusly: void SHADER::Init(IDirect3DDevice9 *Dev, const char fName[], int typ) { m_pDevice = Dev; m_type = typ; if(m_pDevice == NULL)return; // Assemble and set the pixel or vertex shader HRESULT hRes; LPD3DXBUFFER Code = NULL; LPD3DXBUFFER ErrorMsgs = NULL; if(m_type == PIXEL_SHADER) hRes = D3DXCompileShaderFromFile(fName, NULL, NULL, "Main", "ps_2_0", D3DXSHADER_DEBUG, &Code, &ErrorMsgs, &m_pConstantTable); else hRes = D3DXCompileShaderFromFile(fName, NULL, NULL, "Main", "vs_2_0", D3DXSHADER_DEBUG, &Code, &ErrorMsgs, &m_pConstantTable); } How ever, this generates the following error: Error 1 error C2664: 'D3DXCompileShaderFromFileW' : cannot convert parameter 1 from 'const char []' to 'LPCWSTR' The compiler states the issue is with fName in the D3DXCompileShaderFromFile line. I know this has something to do with the character set, and my program was already running with a Unicode Character set on the go. I read that to solve the above problem, I need to switch to a multi-byte character set. But, if I do that, I get other errors in my code, like so: Error 2 error C2664: 'D3DXCreateEffectFromFileA' : cannot convert parameter 2 from 'const wchar_t *' to 'LPCSTR' With it being accredited to the following line of code: if(FAILED(D3DXCreateEffectFromFile(m_pD3DDevice9,effectFileName.c_str(),NULL,NULL,0,NULL,&m_pCurrentEffect,&pErrorBuffer))) This if is nested within another if statement checking my effectmap list. Though it is the FAILED word with the red line. Like wise I get the another error with the following line of code: wstring effectFileName = TEXT("Sky.fx"); With the error message being: Error 1 error C2440: 'initializing' : cannot convert from 'const char [7]' to 'std::basic_string<_Elem,_Traits,_Ax' If I change it back to a Uni code character set, I get the original (fewer) errors. Leaving as a multi-byte, I get more errors. Does anyone know of a way I can fix this issue?

  Read the article

• Announcing RSS feeds of Microsoft All-In-One Code Framework code samples

  - by Jialiang

  Today, we are not only announcing Sample Browser v2 CTP, but we are also excited to announce the availability of RSS feeds of All-In-One Code Framework code samples. By using these feeds, you can easily track and download the new code samples. English RSS feeds All code samples: http://support.microsoft.com/rss/en/rss.xml ASP.NET code samples: http://support.microsoft.com/rss/en/ASPNET.xml Silverlight code samples: http://support.microsoft.com/rss/en/Silverlight.xml Azure code samples: http://support.microsoft.com/rss/en/Azure.xml COM code samples: http://support.microsoft.com/rss/en/COM.xml Data Platform code samples: http://support.microsoft.com/rss/en/Data%20Platform.xml Library code samples: http://support.microsoft.com/rss/en/Library.xml Office dev code samples: http://support.microsoft.com/rss/en/Office.xml VSX code samples: http://support.microsoft.com/rss/en/VSX.xml Windows 7 code samples: http://support.microsoft.com/rss/en/Windows%207.xml Windows Forms code samples: http://support.microsoft.com/rss/en/Windows%20Forms.xml Windows General code samples: http://support.microsoft.com/rss/en/Windows%20General.xml Windows Service code samples: http://support.microsoft.com/rss/en/Windows%20Service.xml Windows Shell code samples: http://support.microsoft.com/rss/en/Windows%20Shell.xml Windows UI code samples: http://support.microsoft.com/rss/en/Windows%20UI.xml WPF code samples: http://support.microsoft.com/rss/en/WPF.xml ??RSS?? ??????:http://support.microsoft.com/rss/zh-cn/codeplex/rss.xml ASP.NET????:http://support.microsoft.com/rss/zh-cn/codeplex/ASPNET.xml Silverlight????:http://support.microsoft.com/rss/zh-cn/codeplex/Silverlight.xml Azure ????: http://support.microsoft.com/rss/zh-cn/codeplex/Azure.xml COM ????: http://support.microsoft.com/rss/zh-cn/codeplex/COM.xml Data Platform ????: http://support.microsoft.com/rss/zh-cn/codeplex/Data%20Platform.xml Library ????: http://support.microsoft.com/rss/zh-cn/codeplex/Library.xml Office dev ????: http://support.microsoft.com/rss/zh-cn/codeplex/Office.xml VSX ????: http://support.microsoft.com/rss/zh-cn/codeplex/VSX.xml Windows 7 ????: http://support.microsoft.com/rss/zh-cn/codeplex/Windows%207.xml Windows Forms ????: http://support.microsoft.com/rss/zh-cn/codeplex/Windows%20Forms.xml Windows General ????: http://support.microsoft.com/rss/zh-cn/codeplex/Windows%20General.xml Windows Service ????: http://support.microsoft.com/rss/zh-cn/codeplex/Windows%20Service.xml Windows Shell ????: http://support.microsoft.com/rss/zh-cn/codeplex/Windows%20Shell.xml Windows UI ????: http://support.microsoft.com/rss/zh-cn/codeplex/Windows%20UI.xml WPF ????: http://support.microsoft.com/rss/zh-cn/codeplex/WPF.xml

  Read the article

< Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >