Search Results

Search found 8298 results on 332 pages for 'laptop'.

Page 135/332 | < Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >

• How to diagnose and fix Kernel Panic Fatal Machine Check error?

  - by 0x4a6f4672

  I have got a new Samsung Series 7 laptop with dual boot setup for Windows 8 and Ubuntu 12.10. A fine machine comparable to a Macbook Pro. The Ubuntu installation was quite a hassle, but with the help of Boot Repair finally it seemed to work. Or so I thought. Windows 8 starts fine, but if I want to start Ubuntu regularly the following Machine Check Exception error occurs, quite similar to this one [Hardware Error] CPU 1: Machine Check Exception: 5 Bank 6 [Hardware Error] RIP !inexact! 33 <00007fab2074598a> [Hardware Error] TSC 95b623464c ADDR fe400 MISC 3880000086 .. [similar messages for CPU 2,3 and 0] .. [Hardware Error] Machine Check: Processor context corrupt Kernel panic - not syncing: Fatal Machine Check Rebooting in 30 seconds Kernel panic does not sound good. Then it starts to reboot, and the second boot trial often works. Is it a Kernel or driver problem? The laptop has an Intel Core i7 processor. I already deactivated Hyperthreading in the BIOS, but it does not seem to help :-( I also disabled the Execute Disable Bit (EDB) flag in the BIOS. EDB is an Intel hardware-based security feature that can help reduce system exposure to viruses and malicious code. Since I disabled it, the error did occur less frequently, but it still appears occasionally :-( It seems to be the same error as described here and here. Maybe a Samsung specific Kernel problem? A similar error also happens on a Samsung Ultrabook Series 9 (which seems to be kernel bugs 49161 and 47121). At my Samsung Series 7, it still occurs for instance during booting on battery after "Checking battery state". Perhaps anyone else has an idea? These Kernel Panic errors are reallly annoying..

  Read the article

• Can't boot Ubuntu 12.04 from external Hard Drive using Mac

  - by Catgirl the Crazy

  Recently, I upgraded the RAM and hard drive on my Early 2008 Macbook to improve the performance. Rather than throw away the old hard drive, I bought an enclosure for it to turn it into an external hard drive, and, since all the data was migrated to my new drive, I decided to install Ubuntu on it for funsies (note: I am a near-total Ubuntu n00b). My first attempt to install Ubuntu didn't work (it gave me errors about not being able to find the BIOS or something), but my second attempt finished successfully (can't remember what, if anything, I did different). However, when I plug the external drive into my Macbook, it gives me a message saying it can't read the disk. Moreover, when I go into the Startup Manager (i.e.: what you get when you turn on the Macbook while holding the option key), the external drive is not one of the available startup disks. I thought this might be because I have an older Macbook, so I tried booting it with my mom's Late 2011 Macbook, and got the same results. Then I tried booting it through my dad's Dell laptop that runs Windows 7, and that time it worked. This is really counter intuitive to me, since the hard drive originally came from a Macbook, so if anything you'd think it would be less compatible with the Windows laptop than the Macbook. In case it helps, here's a link to a picture of how I set up the partition table while doing the install (not shown there is the fact that I checked the "Format?" box next to the /boot partition, since it gave me a warning when I tried to continue the installation without doing so) Anyone have any clue at all? If it helps, the hard drive I'm using is a 120GB 5400-rpm Serial ATA hard disk drive.

  Read the article

• Windows 7 complaint

  - by Chris Williams

  Let me start by saying that I love Windows 7. I think it's the best OS that Microsoft has put out in ages, possibly ever. However, I do have one little complaint. Actually it's not that little, it's become a real pain in the butt for me. I'm talking about Forced Updates. Yes, I know it's always been a problem and that Windows would occasionally force a reboot while you were away, in order to install some important update. That's not quite what I'm referring to. I mean the new "feature" where you don't have the choice to skip updates when shutting down. This isn't a big deal to those of you with desktop machines, but for those of us with laptops, it is rapidly becoming an unforgivable pain in the ass. Let me see if I can make myself a little clearer... If I am shutting down my LAPTOP, 99% of the time it's because I need to get up and go. Not wait around for FORCED UPDATES!! I travel a lot, and there are few things more annoying than shutting down to head to the airport, or shutting down so I can board my flight, or shutting down because we're about to land, etc... and having to wait 5-10 minutes while Win 7 does it's thing. It's damn inconvenient. There has to be a way you can detect if I'm on a laptop and give me the option to postpone updates, or skip them or (here's a thought) run them on startup instead of on shutdown. I'm usually not in a hurry when my machine is booting up, but if I'm powering down it's because I'm ready to GO! Please fix this. Windows 7 rocks in almost every other way I can think of.

  Read the article

• Lenovo ThinkPad L520 slows down when AC power adapter is plugged in

  - by Aamir

  I have a new laptop Lenovo ThinkPad L520 (7859-5BG) Core i5-2520M(2.5GHz) with 4GB RAM. Having installed Ubuntu 11.10 32-bit, while browsing with Chrome on GNOME classic (no effects), I noticed 173% CPU usage by chrome browser process, and the system slowly got very very slow, Now, at this stage as I removed the power adapter, the system suddenly got faster (and stopped the lagging behavior) and CPU usage drops down to 48% !! Observation 1: I was browsing through chrome when my system seemed to be seriously lagging, so I killed chrome to see if it gets any faster. But there remained no difference. Notice that CPU usage was a bit strange here. It showed no high activity, but as soon as I would click on applications in gnome panel, it would shoot CPU usage to 70, or 80 or 90 or 143% etc. depending on how quickly i clicked back and forth. At this instance I removed by AC adapter of my laptop, and suddenly system got fine. So i again clicked on gnome panel, and noticed that it now took only 7% or 12% or 13% at max, with same kind of clicks in application menu. Observation 2: At the other times, with AC adapter plugged in, top indicates four instances of chromium taking 90%, 60%, 47% and 2% (for example), and then once I take out the AC adapter same processes take lesser CPU all of a sudden Intermediate conclusions: What does this indicate ? I cannot figure out any "other" process in "top" that is suddenly being triggered, its the same process that hogs up my CPU once AC power is plugged in ! NOTE: the problem is now CONFIRMED, as i can repeat that when I have power adapter plugged in ! Can anyone tell me what exactly does this indicate ? What is wrong, is it some bug with power management or what ?

  Read the article

• Is this an apt-get issue or network issue?

  - by zharvey

  I just installed my first Ubuntu server (12.04) instance and immediately am noticing a few things: Running apt-get install or update fails (see below) Running ifconfig produces peculiar IP addresses starting with 10.x.x.x and my router does not see the server at all in its "Attached Devices" page (its a consumer grade Netgear) When I run apt-get I get 50+ of the following errors: Failed to fetch <some-http-url. Temporary failure resolving <blah.ubuntu.com I read up on this error for 12.04, and found some similar posts on this forum and on serverfault that recommended going into /etc/resolv.conf and adding an entry: nameserver 8.8.8.8 To my surprise, I found that /etc/resolve.conf was a symlink pointing to somewhere else and I had to delete it first, then create a new one with the entry indicated above. I restarted the server and tried running apt-get again: same results. How do I start diagnosing the problem (I'm a relatively new Linux/Ubuntu user)? Additional details that may help: This is actually a virtual machine running as a VirtualBox guest OS The physical host that is running this VM is my laptop which has a wireless connection; I'm wondering if (somehow) the laptop is getting the network wirelessly, but perhaps either the VBox VM and/or the Ubuntu server OS isn't configured for wireless and so nothing is "getting through"? Thanks in advance for any pointers! Edit: Here is a snapshot of my VM's Network settings (only Adapter 1 has any information populating its fields, so I assume my VM has only 1 adapter): Here is the output when I run ifconfig from the terminal: And here is the output when I run route from the terminal: Running ping google.com:

  Read the article

• Xfce gets really confused about session saving, etc

  - by Pointy

  I'm getting a new laptop running with 11.04 Ubuntu. I've got the xfce4 packages all installed, which is something I've had no problems with on any of my other machines. On this new laptop, however, though I can log in and use an xfce session without any problems, logging out of a session is problematic: I click the "Log out" widget from the panel and then "Log out" from its option dialog. Then the thing just sits there, not logging out. Subsequent attempts to open the "Log out" widget fail with an error about the session manager being busy. After maybe a minute or so, it logs out. Though I've got the "Save session" option checked in the log out dialog, xfce just makes a complete hash of the business. It does remember the applications that I had running, but it seems to forget about the window manager (!!) and the workspace configuration. I don't log in/out that often, and generally I don't care much about restarting applications, but the window manager being missing is of course pretty annoying. I like xfce because it's simple and unobtrusive and usually works pretty well. I've never experienced this, and I've got two other machines also running 11.04 with pretty much the same setup (straight Ubuntu install with xfce4 packages added). Is there some good way to diagnose stuff like that? edit — well I nuked my session cache, did an explicit save from the session widget, and now it works. Well, it doesn't save the workspace location for each client and instead opens them all up on the first workspace, but I think that may be because, in the session, xfwm4 is the last thing in the "Client" list, so before it's started all the other clients just pile up in the first (and only) workspace. I'm still curious about how exactly it gets so messed up. I certainly wasn't knowingly attempting anything fancy or unorthodox, though I may have done something fishy inadvertently.

  Read the article

• Test a simple multi-player (upto four players) Android game in single developer machine

  - by Kush

  I'm working on a multi-player Android game (very simple it is that it doesn't have any game-engine used). The game is based on Java Socket. Four devices will connect the game server and a new thread will manage their session. The game server will server many such sessions (having 4 players each). What I'm worried about is the testing of this game. I know it is possible to run multiple android emulators, but my development laptop is very limited in capabilities (3 GB RAM, 2 Ghz Intel Core2Duo and on-board Graphics). And I'm already using Ubuntu to develop the game so that I have more user memory available than I'd have with Windows. Hence, the laptop will burn-to-death on running 4 emulator instances. I don't have access to any android device, neither I have another machine with higher configuration. And I still have to develop and test this game. P.S. : I'm a CS student, and currently don't work anywhere, and this game is college project, so if there are any paid solutions, I cannot afford it. What can I do to test the app seamlessly? ability to test even only 4 clients (i.e. only 1 session) would suffice, its alright if I can't simulate real environment with some 10-20 active game sessions (having 4 players each).

  Read the article

• Ubuntu won't boot after initializing the Build Environment for Android

  - by EntryLevelDev

  My laptop worked perfectly util I initialized the build environment for Android. The GUI won't start. It looks like some kinds of graphics card problems. I tried to fix it but after trying a lot of solutions on the internet nothing worked. (I only know basic linux stuffs.) I've already reinstalled the OS. However, I still want to build the Android from source. Any idea what might cause the problem? any workaround? Here is the command that I used to initialize the build environment: $ sudo apt-get install git gnupg flex bison gperf build-essential \ zip curl libc6-dev libncurses5-dev:i386 x11proto-core-dev \ libx11-dev:i386 libreadline6-dev:i386 libgl1-mesa-glx:i386 \ libgl1-mesa-dev g++-multilib mingw32 tofrodos \ python-markdown libxml2-utils xsltproc zlib1g-dev:i386 $ sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gnu/libGL.so My laptop model is asus u36sd. (https://help.ubuntu.com/community/Asus_U36SD) Thanks Edit: Base on this, I guess libgl1-mesa-glx:i386 might cause the issue. sudo apt-get install libgl1-mesa-dri:i386 The following packages will be REMOVED: libgl1-mesa-dri-lts-quantal libxatracker1-lts-quantal ubuntu-desktop xorg xserver-xorg-lts-quantal xserver-xorg-video-all-lts-quantal xserver-xorg-video-vmware-lts-quantal The following NEW packages will be installed: libdrm-intel1:i386 libdrm-nouveau1a:i386 libdrm-radeon1:i386 libdrm2:i386 libexpat1:i386 libffi6:i386 libgl1-mesa-dri:i386 libllvm3.0:i386 libpciaccess0:i386 libstdc++6:i386

  Read the article

• Missing Wireless access point

  - by nvcnvn

  I have an: Ubuntu 12.04 with proprietary Boardcom STA Wireless driver installed BCM43224 802.11a/b/g/n wireless card TP-LINK TD-W8101G 54Mbps Wireless ADSL2+ Modem Router Yesterday before I went to sleep, I still connect to my wireless access point, this morning when I start my laptop I don't see it in the list - there are some neighbors listed but not mine. The WLAN is green, with my old Nokia E72, I still see my access point with 100% signal. I have tried to restart my laptop and turn the firmware off/on by the switch but no help. I have read the WirelessTroubleShootingGuide but I can do anything. Here is some of my card info: *-network description: Wireless interface product: BCM43224 802.11a/b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: eth1 version: 01 serial: c0:cb:38:06:5d:53 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11abgn resources: irq:17 memory:f0500000-f0503fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 03 serial: f0:4d:a2:42:ab:e4 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168d-1.fw ip=192.168.1.3 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:42 ioport:5000(size=256) memory:f0404000-f0404fff memory:f0400000-f0403fff memory:f0420000-f043ffff

  Read the article

• External monitor is blank if I boot with the monitor plugged in

  - by Ronald

  Ubuntu 12.04 has problem with Intel GM45 Chipset, featuring the the Mobile Intel® Graphics Media Accelerator (GMA) 4500MHD I have a COMPAQ Presario CQ70 laptop with an Intel GM45 chipset that features the Mobile Intel® Graphics Media Accelerator (GMA) 4500MHD. I was using the second HDMI video port to drive both a projector or a second monitor. Everything was working fine under Ubuntu 8.04, 9.04, 10.04 and 11.04, however, when I upgraded to 12.04 the second monitor stopped working. What I mean when I say stopped working is: boot with monitor plugged in. Blank screen! Power off, unplug monitor and power on everything works. Plug in monitor (only mode that works in Mirror mode) two monitors that look same. Close laptop lid. screen goes blank only option for useful system is power off and unplug monitor. If I attempt to Adjust the monitor to maximum resolution that the monitor will handle and turn off mirror mode nothing can be moved onto that screen. This all worked fine with earlier versions of Ubuntu, is there a notes about the changes to the graphics management system in 12.04, like there is for the resolver change?

  Read the article

• Frequent change of file-system to read-only

  - by Anuj

  I am using Ubuntu 12.04 on my relatively new laptop. Initial few days, everything worked fine, but then suddenly I started getting a strange problem. After every 2-3 days, the file-system was becoming read-only. I was unable to save/download anything in the installation drive and the system hanged if I attempted to do so, after which I needed to force restart. I had to run fsck in the repair mode to get it fixed (temporarily). There I used to get the following messages: "Inodes that were part of a corrupted orphan linked list found. UNEXPECTED INCONSISTENCY: RUN FSCK MANUALLY. fsck / [886] terminated with status 4. Filesystem has errors: /" Then it stopped here and I had to restart again, after which it asked whether I want to repair or not, then the system ran properly. After a day or 2, again I used to face exactly the same problem. The problem become more frequent in the last few days, and even after running the fsck and restarting, was not solving the problem. I re-installed the OS a couple of days back, but even after that, the problem exists. Though it is not that frequent now, but still at times, the file-system becomes read-only and the system stops behaving normally, and I have to run fsck in the repair mode, which makes the whole thing normal. Yes I keep my laptop switched on for long hours and it does get heated up. Please help. Thanks, Anuj

  Read the article

• Dock with dual external DVI monitors with Intel + Nvidia Optimus?

  - by Ryan

  I have a Dell Latitude E6420 laptop plugged into a docking station, and the dock has 2 monitors (connected with DVI). Also note that I've installed Ubuntu alongside (dual-boot) Windows 7. I can't get the dual monitors to work both on Ubuntu (either 11.10 or 12.04) and Windows 7. When I run lspci | grep VGA, I get: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation GF108 [Quadro NVS 4200M] (rev a1) If I then reboot and uncheck Optimus setting in the BIOS during reboot, I'm able to get the dual monitors to work in Ubuntu 12.04 (but I need to configure them every boot in Nvidia Settings). When I run lspci | grep VGA, I get: 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [Quadro NVS 4200M] (rev a1) But then if I reboot into Windows (leaving the Optimus unchecked), Windows can't detect external monitors, and the resolution is unacceptably low. I've seen on many forum posts that this particular graphics card setup causes lots of headaches. I haven't been able to resolve my problem yet. How can I use my external display on my laptop with intel and nvidia video cards? How to use external displays with Intel driver on a NVidia/Intel hybrid system nVidia Optimus , Unity 3D and Dual Monitors "Just use VGA instead of DVI" isn't an option because my dock has only 1 VGA port (and 2 DVI). Switching the BIOS setting on every reboot and then reconfiguring the display settings every time is tedious, time-consuming, and impractical. Do you know how to make this work smoothly? Thanks for your help! P.S. see also: http://superuser.com/questions/434358/dell-latitude-e6420-dual-boot-ubuntu-windows-7-optimus-graphics-problems

  Read the article

• Recommendations for adjustable sit-stand workstations?

  - by Chris Phillips

  Recently, I've been feeling the discomfort of sitting at my desk all day long. I'm fairly active, stretch, and take regular breaks, but some days it's still pretty uncomfortable to sit all day long, whether in a nice chair or on an exercise ball. I would really like able to stand at my computer for part of the day. My current setup is a large desk with two 26" lcds and a 17" laptop. I don't mind if the laptop isn't adjustable, as I don't use it as regularly as the monitors. I would like to be able to fairly easily switch from a sitting position to a standing position and back again as necessary. I've been looking into adjustable height desks and stands and found that they tend to be either really expensive, or don't quite meet my needs. (For example, the Ergotron WorkFit-S Dual LCD workstation looks like the ideal feature set at a reasonable price, but won't fit with my monitors.) Any suggestions or thoughts? Update: fixed a typo. Thanks @RDL!

  Read the article

• Can not access Internet (DNS names do not resolve) after update today

  - by Aras

  I have been using Precise for a few weeks now for work with no problem. Today, I am not able to access any website using either wired or wireless connections. I installed the updates today which included nautilus, xserver, and a new kernel (3.2.0-24). After restarting I no longer was able to browse the Internet using firefox or chrome. Trying to ping google in terminal gives ping: unknown host google.ca I have tried: Connecting to wireless or wired networks (both working on other machines) Restart the machine and boot with previous Kernel Manually configure opendns on my wired connection Restart the network and the laptop and the wireless card Without any success so far. I am not sure where to go next. Please let me know the cause of the issue or help me troubleshoot it. Note that the laptop does receive an ip address, and it can ping ip address of google.ca (74.125.127.94) but not the domain name, or any domain name for that matter. This system was upgraded from 11.10 to 12.04 more two weeks ago.

  Read the article

• How to See Your Current Wi-Fi Connection Speed in Mac OS X

  - by The Geek

  Ever since I’ve been using my new MacBook Air, I’ve been befuddled by how to do some of the simplest tasks in Mac OS X that I would normally do from my Windows laptop—like show the connection speed for the current Wi-Fi network. So am I using Wireless-N or not? Normally, on my Windows 7 laptop, all I’d have to do is hover over the icon, or pop up the list—you can even go into the network details and see just about every piece of data about the network, all from the system tray. Here’s how to see your current connection information on your Mac Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Free Shipping Day is Friday, December 17, 2010 – National Free Shipping Day Find an Applicable Quote for Any Programming Situation Winter Theme for Windows 7 from Microsoft Score Free In-Flight Wi-Fi Courtesy of Google Chrome Peaceful Winter Road at Sunset Wallpaper Everything You Ever Wanted to Know About Why Pac-Man’s Ghosts Move the Way They Do

  Read the article

• grub shows same linux image twice

  - by binW

  After a recent update, I get multiple entries for same linux kernel version in the boot menu. I have tried running update-grub2 but it also lists the same linux-image version twice i.e adnan@adnan-laptop:/boot$ sudo update-grub2 Generating grub.cfg ... Found linux image: /boot/vmlinuz-2.6.32-26-generic Found initrd image: /boot/initrd.img-2.6.32-26-generic Found Windows 7 (loader) on /dev/sda1 Found linux image: /boot/vmlinuz-2.6.32-26-generic Found initrd image: /boot/initrd.img-2.6.32-26-generic Found memtest86+ image: /boot/memtest86+.bin done As you can see vmlinuz and initrd are found multiple times. But there is only one vmlinuz and initrd file in /boot adnan@adnan-laptop:/boot$ ls -l total 15120 -rw-r--r-- 1 root root 646144 2010-11-24 15:58 abi-2.6.32-26-generic -rw-r--r-- 1 root root 110601 2010-11-24 15:58 config-2.6.32-26-generic drwxr-xr-x 3 root root 4096 2011-01-01 18:59 grub -rw-r--r-- 1 root root 8335528 2010-12-20 23:36 initrd.img-2.6.32-26-generic -rw-r--r-- 1 root root 160280 2010-03-23 14:40 memtest86+.bin -rw-r--r-- 1 root root 2156100 2010-11-24 15:58 System.map-2.6.32-26-generic -rw-r--r-- 1 root root 1336 2010-11-24 16:00 vmcoreinfo-2.6.32-26-generic -rw-r--r-- 1 root root 4050080 2010-11-24 15:58 vmlinuz-2.6.32-26-generic Can some one tell me why does update-grub2 finds vmlinuz and initrd twice? and how to stop this from happening.

  Read the article

• Use TV (hdmi) with non-square pixels

  - by labsin

  I am having a problem when I connect my LG plasma tv (with a native resolution of 1024x768 pixels) to my 12.04 laptop. The pixels (actual pixels, not the signal) of my TV are stretched so it gets his 16:9 ratio. The pixels are rectangular (1.3333x1). Everything I display from my laptop oviously get stretched (4:3 stretched to 16:9). There is a different dpi in X and Y needed for it to display properly (some kind of anamorphic mode). Default Ubuntu uses a dpi of 96x96. I can change it using xrandr, but only square eg 100x100 or 70x70. Already looked here, but it seems Ubuntu totally ignore the displaySize in xorg.conf When I use the code below to see the dpi and nothing I do changes it. The displaySize also stays the same (calculated using 96 dpi and the resolution) xdpyinfo | grep -B2 resolution I use the propretary ATI drivers for my ATI Mobility Radeon HD 50xx but it is the same with the Radeon drivers. My temporary solution is to use: xrandr --output DFP1 --mode 1024x768 --scale 1.333333333333x1 --output LVDS --off But with this the right side of the screen is nog accesable. This is a known problem with xrandr --scale and ubuntu. This is because of a patch for the mouse/windows not going outside the screen. I search a way to change the DisplaySize or the dpi(to something not square like 128x96) when I connect the display.

  Read the article

• How can I set external monitor as default?

  - by iJeeves

  I have connected an external monitor to my laptop through HDMI. Currently either my Desktop is getting extended to the external monitor (with native resolution) or low resolution on both when I choose "Same Image in both". How can I ensure that the external monitor is used by default and the laptop monitor just blanks. I generated the xorg.conf file by doing: X -configure The following is the content of xorg.conf.new file generated in my user folder. Should I copy this anywhere? Should I edit the contents? Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "record" Load "extmod" Load "dbe" Load "dri" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" ### Available Driver options are:- ### Values: : integer, : float, : "True"/"False", ### : "String", : " Hz/kHz/MHz", ### : "%" ### [arg]: arg optional #Option "NoAccel" # [] #Option "SWcursor" # [] #Option "ColorKey" # #Option "CacheLines" # #Option "Dac6Bit" # [] #Option "DRI" # [] #Option "NoDDC" # [] #Option "ShowCache" # [] #Option "XvMCSurfaces" # #Option "PageFlip" # [] Identifier "Card0" Driver "intel" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• .NET development on Macs

  - by Jeff

  I posted the “exciting” conclusion of my laptop trade-ins and issues on my personal blog. The links, in chronological order, are posted below. While those posts have all of the details about performance and software used, I wanted to comment on why I like using Macs in the first place. It started in 2006 when Apple released the first Intel-based Mac. As someone with a professional video past, I had been using Macs on and off since college (1995 graduate), so I was never terribly religious about any particular platform. I’m still not, but until recently, it was staggering how crappy PC’s were. They were all plastic, disposable, commodity crap. I could never justify buying a PowerBook because I was a Microsoft stack guy. When Apple went Intel, they removed that barrier. They also didn’t screw around with selling to the low end (though the plastic MacBooks bordered on that), so even the base machines were pretty well equipped. Every Mac I’ve had, I’ve used for three years. Other than that first one, I’ve also sold each one, for quite a bit of money. Things have changed quite a bit, mostly within the last year. I’m actually relieved, because Apple needs competition at the high end. Other manufacturers are finally understanding the importance of industrial design. For me, I’ll stick with Macs for now, because I’m invested in OS X apps like Aperture and the Mac versions of Adobe products. As a Microsoft developer, it doesn’t even matter though… with Parallels, I Cmd-Tab and I’m in Windows. So after three and a half years with a wonderful 17” MBP and upgraded SSD, it was time to get something lighter and smaller (traveling light is critical with a toddler), and I eventually ended up with a 13” MacBook Air, with the i7 and 8 gig upgrades, and I love it. At home I “dock” it to a Thunderbolt Display. A new laptop .NET development on a Retina MacBook Pro with Windows 8 Returning my MacBook Pro with Retina display .NET development on a MacBook Air with Windows 8

  Read the article

• Can I use all my RAM for application data?

  - by gsedej

  Hi! I have yet another question about "where is my Linux memory" Question goes: can I use cache for application data? On my laptop I have 1GB ram. Situation after some time of work: browser takes 400MB and all other apps caa 300MB (quickly summed in system monitor). System monitor says I use 90% of RAM and I have already 200MB on swap. Laptop is getting slower when I start new things (e.g. open new tab in browser or open new Nautilus window). probably putting memory on swap So there should be 1200MB (ram+swap) used but all app I see uses only 600MB. Where are other 600MB? Out of this 600MB there is 400MB real RAM. I am not copying or any other massive IO activity. I read about Linux smartly uses all ram it has using buffers and cache. So, kernel (cache) uses 300MB. What if I don't want to have disk mirrored and I want to use memory for application data (e.g. new browser tab)? I don't need 200MB of mirrored disk data, because I (for example) won't use open the same photos on data partition I just seen. So can I use all my RAM for application data? (including browser, desktop, xorg, other services). How?

  Read the article

• Why do my gvfs mounts not show up under ~/.gvfs?

  - by kynan

  From what I read, when mounting a network share via nautilus or gvfs-mount the mount point should be in ~/.gvfs. This seems not to be the case for me: I tried mounting both an FTP and SMB share via both nautilus and gvfs-mount under both Ubuntu Maverick and Natty and in none of the cases did I see any mount point under ~/.gvfs. I can access the shares just find in nautilus, but I want to have access via the command line, which is why I need a mount point in the file system. Edit: Debugging following James Henstridge's answer and enzotib's comment revealed that on my laptop gvfs-fuse-daemon is running and consequently gvfs mounts show up in ~/.gvfs, whereas on the 2 workstations where ~/.gvfs remained empty gvfs-fuse-daemon was not running. On all 3 machines there are other gvfs processes running: gvfsd, gvfs-afc-volume-monitor, ... On the laptop, mount | fgrep gvfs yields gvfs-fuse-daemon on /home/xxx/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=xxx) That raises the questions: How are shares mounted without gvfs-fuse-daemon running? Is there no mount point created in that case and is every access to the share a gvfs library call? Which daemon is responsible? gvfsd? What's the role of gvfs-fuse-daemon? Does it only create a fuse mount point in ~/.gvfs?

  Read the article

• Bad DMA/do_IRQ errors on suspend/resume, with occasional freezing

  - by Steve Kroon

  Every time I suspend or resume my laptop (Dell Latitude E6520, bought this year), I get 2 messages of the form displayed on the console just before shutting down/starting up: [ 407.107610] ehci_hcd 0000:00:1d.0: dma_pool_free buffer-128, f6f18000/36f18000 (bad dma) On occasion, I get a message of the form: [ 3753.979066] do_IRQ: 0.177 No irq handler for vector (irq -1) On occasion, my machine freezes with a flashing Caps Lock button when suspending, after which I need to do a hard shutdown. This never happened before the messages started appearing (a while back), and I think it never happens without a do_IRQ message appearing (although I'm not sure about that). [There's nothing in the owner's manual on a flashing Caps Lock button; apparently it may be a kernel panic if the scroll lock also flashes, but the laptop doesn't have a scroll lock light, and there's no message on the console saying kernel panic.] Are these bad DMA/do IRQ messages serious, and what can I do to investigate/troubleshoot them and the freezing? Edit: I've also now received the following error messages a few times: [246943.023908] JBD: I/O error detected when updating journal superblock for sdb1. [246943.023958] Buffer I/O error on device sdb1, logical block 0 [246943.023996] EXT3-fs (sdb1): I/O error while writing superblock Edit: Output of dmesg at http://pastebin.com/ra7MTQEj ; contents of /var/log/kern.log at http://pastebin.com/i6jf0Md9 Edit: the output of some smartctl (-a, -x, --log=error, --log=xerror) instructions is available at http://paste.ubuntu.com/1088488/ . Edit (31/8/2012): Output of dmesg|grep -i ehci available at http://paste.ubuntu.com/1177246/ .

  Read the article

• Setting up Beats audio on HP Pavilion m6

  - by Joel Auterson

  I have an HP Pavilion m6-1054sa laptop, with a Beats subwoofer on the bottom. The normal laptop speakers work fine under Ubuntu but the Beats speaker(s?) does not. Anyone know how to get this working? Here's my lspci output, if it helps... 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Thames XT/GL [Radeon HD 7600M Series] (rev ff) 07:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01) 07:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 0a) 08:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)

  Read the article

• Be aware of the difference between CURRENT_DATE and SYSDATE

  - by Kevin Smith

  I was running some queries in SQL Developer against the WebCenter Content (WCC) schema that included date fields such as dInDate. I was comparing the dates against CURRENT_DATE. I was not getting the expected results. I did some googlng and didn’t find a solution, but I did run across a reference to SYSDATE. I tried SYSDATE in my queries and got the expected results. I did a TO_CHAR on the two date fields and found they returned different times. CURRENT_DATE returned the time from my laptop which was  in the EDT time zone. SYSDATE returned the time from the database server which happened to be in the PDT time zone. I guess if both the database server and my laptop were in the same time zone I would not have seen any problem. Here is the query I ran to display the two fields. select to_char(current_date,'DD-MON-YY HH:MI:SS'), to_char(sysdate,'DD-MON-YY HH:MI:SS') from dual; As you can see from the screen shot from SQL Developer they definitely returned different times. I’m sure there is some command or setting you can use to prevent this problem, but for me the take away is to use SYSDATE in your queries when you want to do any date comparison.

  Read the article

• Nvidia 740M still not working after Bumblebee installation

  - by Jon

  first of all, I have checked a lot of similar topics, but I still can't get my laptop to use Nvidia 740M. So first things first. I have a laptop Asus X550V(i5-3230, 4gb RAM, Nvidia 740M + Intel HD4000). I installed Ubuntu 13.10 alongside Win8(preinstalled) and both systems are running without problems. However, I have problem with second graphic card(Nvidia 740M), as Ubuntu doesn't recognize it. I installed bumblebee with this tutorial https://wiki.ubuntu.com/Bumblebee#Installation, but I still get error "Cannot access secondary GPU" error when trying to run ''optirun Steam'' in terminal. Then I tried to do this: [ERROR]Cannot access secondary GPU - error: [XORG] (EE) No devices detected. you need to edit the /etc/bumblebee/xorg.conf.nvidia (or /etc/bumblebee/xorg.conf.nouveau if using the noveau driver) and specify the correct BusID by following the instructions therein. But with lspci / VGA i get only info about Intel 4000, but no Nvidia. When I type only lspci, I get the line for Nvidia 740M,but after I edit the config file I still get second card error. Also, in /etc/bumblebee/xorg.conf.nvidia there wasn't BusID or anything similar, so I just added the whole line in device section. As I sad, I tried a lot of things to get it working, avoiding this forum(as I din't want to bother people with some solutions possible), but alas!, I had to bother you. If there is a need for some additional info, just say, no problem at all. Thank you very much in advance. :)

  Read the article

< Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >