Search Results

Search found 4834 results on 194 pages for 'nsswitch conf'.

Page 135/194 | < Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >

  • Setting up shared connection

    - by Calvin Froedge
    I have a network that is connected to the internet via a switch connected to a router. I have it setup like this so I can work on the new network without causing problems on the old. Anyway, I'm trying to enable internet connection sharing. Internet comes to server like this: Modem - Router - Switch - Ubuntu 11.10 (Eth0) I want to share the connection through Eth1 (Eth1 - Managed Switch - Clients). Here is my config for /etc/network/interfaces: I have a DHCP server running on Eth1. Here is my config: ddns-update-style none; option domain-name "myserver.local"; option domain-name-servers 192.168.1.2, 8.8.8.8; default-lease-time 600; max-lease-time 7200; authoritative; subnet 192.168.1.0 netmask 255.255.255.0 { interface eth1; range 192.168.1.3 192.168.1.254; option routers 192.168.1.1; option subnet-mask 255.255.255.0; option broadcast-address 192.168.1.255; } Here is /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp #Used for internal network auto eth1 iface eth1 inet static address 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255 network 192.168.1.0 Here is /etc/hosts: 127.0.0.1 localhost 127.0.1.1 myserver.isp.com server 192.168.1.2 server.myserver.local server myserver.local In /etc/sysctl.conf, I've set the following: net.ipv4.ip_forward=1 Finally, in /etc/rc.local, I've set the following: /sbin/iptables -P FORWARD ACCEPT /sbin/iptables --table nat -A POSTROUTING -o eth1 -j MASQUERADE When I ping 8.8.8.8 (google's DNS) from a client that is authenticated with my DHCP server (they have been assigned a local ip, like 192.168.1.10), I get a timeout. How can I debug this further to figure out where my problem is?

    Read the article

  • Site in subdomain (MaraDNS + Nginx)

    - by Grzegorz
    Welcome, Actually I'm doing some experiments on my VPS with Ubuntu. I've installed MaraDNS with Nginx. At this moment I've correctly launch static site which is available from Internet (maindomain.com). In next step I want to add new site which will be available in subdomain, for example dev.maindomain.com. I've tried to db.maindomain.com file (used by MaraDNS): maindomain.com. xxx.xxx.xxx.xxx www.maindomain.com. CNAME maindomain.com. dev.maindomain.com. xxx.xxx.xxx.xxx Where xxx.xxx.xxx.xxx is VPS IP address. In nginx.conf I have: server { listen 80; server_name maindomain.com; access_log /var/log/nginx/maindomain.com.log location / { root /var/www/maindomain.com; index index.html; } } server { listen 80; server_name dev.maindomain.com; access_log /var/log/nginx/dev.maindomain.com.log location / { root /var/www/dev.maindomain.com; index index.html; } } With this configuration maindomain.com works properly, but dev.maindomain.com isn't available. When I try: ping dev.maindomain.com then I get my xxx.xxx.xxx.xxx IP. Do you have any suggestions how can I resolve this problem?

    Read the article

  • Gray "apply" button in NetworkManager openvpn connection window

    - by user20627
    I installed all the necessary packages for the networkmanager-openvpn function to function. The openvpn-connection-setting are successfully imported into the networkmanger via the conf file but the apply button is grayed out, so that actually saving and using the connection isn't possible? Does anyone know, where the problem is? It's a fresh install of Ubuntu 10.10 after the upgrade from 10.04 sent the networkmanger down the drain. I was told the following: Sounds like a policy issue. read this thread: http://ubuntuforums.org/showthread.php?t=1616355 look carefully in the file mentioned, at the element. What is there ? "No" will cause the action detailed to be unavailable. Ideally "yes" or "auth_admin_keep" should be there. They will either allow all access, or prompt for a admin password. The above does not seem to work for me - It still has a gray apply button. If I choose a file for User certificate as well as CA Certificate "which is all openvpn supplies and needs" and a key file it will allow me to click apply - but obviously wont connect. :l I am at a lost end.

    Read the article

  • Using JuJu with private Openstack cloud deployment?

    - by user76054
    I'm seeing a number of problems trying to use JuJu with our internally deployed Openstack cloud. Most of this appears to be centered around DNS host resolution as well as the need to deal with our company's internal HTTP proxies. Our Openstack deployment relies upon an unroutable 172.16.0.0/12 block of addresses for VLAN allocation to each project (tenant) hosted on our internal cloud. User's have the option of assigning one or more floating addresses to instances, allocated from a block of routable addresses on our internal companies LAN. Currently, Openstack doesn't register instance names with anything other than the DNSMASQ service running on the cloud controller. As such, there's no way to resolve this address through our internal DNS hierarchy (this issue has already been reported as Bug #945505). As such, even though I can bootstrap my JuJu server node, I can't connect to it with the JuJu client, since it can't resolve the local (private) network name. I am able to ssh to the node, once I've assigned it an internally routable (i.e. floating) address. Which leads to the next issue. Next, to install software on an instance running in our cloud, it must have our internal proxy address defined - either in the apt.conf file or via environment variables. Unfortunately, when bootstrapping the server node, there's no provision to pass this info into a instance via JuJu environment.yaml file (if this is even the best way to handle this issue). As a result, the bootstrap node is unable to install the required packages. I'm assuming (dangerous, I know) that the way that I've deployed Openstack in our internal environment is probably not unique. Has anyone else encountered these issues? And more importantly, are work arounds available? Regards, Ross

    Read the article

  • Apache htaccess results in files being downloaded instead of displayed

    - by chrissik
    So I had this "beautiful" website that did exactly what I wanted it to do. Then I shut down my PC, reboot and...the pages just download now instead of being displayed. I re-installed XAMPP and launched Apache again and I was able to identify the .htaccess file as the cause of the problem. Options +FollowSymlinks RewriteEngine on RewriteCond %{QUERY_STRING} !^desktop RewriteCond %{HTTP_USER_AGENT} "android|blackberry|googlebot-mobile|iemobile|iphone|ipod|#opera mobile|palmos|webos" [NC] RewriteRule ^/?$ /mobile/index [L,R=302] RewriteRule ^/?$ /de/index [R] RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME}\.html -f RewriteRule ^(.*)$ $1.html Here is the problem I guess: RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME}\.html -f RewriteRule ^(.*)$ $1.html This should make it possible to use /de/index instead of /de/index.html - but somehow it causes the page to download if I open localhost/de/index (but with localhost/de/index.html it works fine...). I'm using HTML Sites with SSI Elements on a Apache web server. The only other file that is different to the out-of-the-box ones is the httpd.conf, where I enabled SSI: AddType text/html .shtml AddHandler server-parsed .shtml AddHandler server-parsed .html AddHandler server-parsed .htm Options Indexes FollowSymLinks Includes AddOutputFilter INCLUDES .shtml Options +Includes So I hope there is somebody among you that can help me with this annoying problem as I'm quite desperate... for some reason, even without the problematic lines Chrome keeps downloading the files (even if I delete the .htaccess file), while IE and Opera display the pages. Edit: Now Opera also wants to download files (whether index.html or index are called).

    Read the article

  • How to check if the tab page is dirty and prompt the user to save before navigating away using ajaxtoolkit tab control in ASP.NET

    Step 1: Put a hidden variable in Update panel <asp:HiddenField ID="hfIsDirty" runat="server" Value="0" /> Step 2: Put the following code in ajaxcontrol tool kit tabcontainer OnClientActiveTabChanged="ActiveTabChanged" Copy the following script in the aspx page. <script type="text/javascript">       //Trigger Server side post back for the Tab container       function ActiveTabChanged(sender, e) {           __doPostBack('<%= tcBaseline.ClientID %>', '');       }       //Sets the dirty flag if the page is dirty       function setDirty() {           var hf = document.getElementById("<%=hfIsDirty.ClientID%>");           if (hf != null)               hf.value = 1;       }       //Resets the dirty flag after save       function clearDirty() {           var hf = document.getElementById("<%=hfIsDirty.ClientID%>");           hf.value = 0;       }       function showMessage() { return "page is dirty" }       function setControlChange() {           if (typeof (event.srcElement) != 'undefined')           { event.srcElement.onchange = setDirty; }       }       function checkDirty() {           var tc = document.getElementById("<%=tcBaseline.ClientID%>");           var hf = document.getElementById("<%=hfIsDirty.ClientID%>");           if (hf.value == "1") {               var conf = confirm("Do you want o loose unsaved changes? Please Cancel to stay on page or OK to continue ");               if (conf) {                   clearDirty();                   return true;               }               else {                   var e = window.event;                   e.cancelBubble = true;                   if (e.stopPropagation) e.stopPropagation();                   return false;               }           }           else               return true;       }       document.body.onclick = setControlChange;       document.body.onkeyup = setControlChange;       var onBeforeUnloadFired = false;       // Function to reset the above flag.       function resetOnBeforeUnloadFired() {           onBeforeUnloadFired = false;       }       function doBeforeUnload() {           var hf = document.getElementById("<%=hfIsDirty.ClientID%>");           // If this function has not been run before...           if (!onBeforeUnloadFired) {               // Prevent this function from being run twice in succession.               onBeforeUnloadFired = true;               // If the form is dirty...               if (hf.value == "1") {                   event.returnValue = "If you continue you will lose any changes that you have made to this record.";               }           }           window.setTimeout("resetOnBeforeUnloadFired()", 1000);       }       if (window.body) {           window.body.onbeforeunload = doBeforeUnload;       }       else           window.onbeforeunload = doBeforeUnload;   </script> Step 3: Here is how the tabcontrol should look like <asp:UpdatePanel ID="upTab" runat="server" UpdateMode="conditional">                     <ContentTemplate>                         <ajaxtoolkit:TabContainer ID="tcBaseline" runat="server" Height="400px" OnClientActiveTabChanged="ActiveTabChanged">                             <ajaxtoolkit:TabPanel ID="tpPersonalInformation" runat="server">                                 <HeaderTemplate>                                     <asp:Label ID="lblPITab" runat="server" Text="<%$ Resources:Resources, Baseline_Tab_PersonalInformation %>"                                         onclick="checkDirty();"></asp:Label>                                 </HeaderTemplate>                                 <ContentTemplate>                                     <asp:PlaceHolder ID="PlaceHolder1" runat="server"></asp:PlaceHolder> </ContentTemplate>                             </ajaxtoolkit:TabPanel> span.fullpost {display:none;}

    Read the article

  • Update to kernel 3.12 seems to fail: uname reports old rc7

    - by carlo
    I currently run Xubuntu 13.10 with kernel 3.12 rc7. Today I tried updating to the latest 3.12 kernel (non-rc), but this seems to fail. When installing the image and headers I see the following error passing by: ... run-parts: executing /etc/kernel/postinst.d/dkms 3.12.0-031200-generic /boot/vmlinuz-3.12.0-031200-generichis Error! The dkms.conf for this module includes a BUILD_EXCLUSIVE directive which does not match this kernel/arch. This indicates that it should not be built. ... After rebooting, when I do uname -r or cat /proc/version it tells me that I'm still running on the old rc7 kernel. Since my microphone wasn't working on my Sony Vaio Pro 13 I did download and install the latest ALSA drivers using the oem-audio-hda-daily-dkms package which seem to fix the problem (with the mic). Maybe this has something to do with it? I also tried removing the package using sudo apt-get purge oem-audio-hda-daily-dkms but no success.

    Read the article

  • Can't complete dropbox installation from behind proxy

    - by Mark Jones
    Problem: My PC on campus sits behind a proxy (requiring authentication) and I can't setup Dropbox. I am convinced that this is a proxy issue as I can't setup Ubuntu one either (but I don't use Ubuntu One so that is not a problem). I have looked at the Ubuntu One fix but it seems to be to modify settings explicitly related to Ubuntu One. I can install the nautilus-dropbox package (compiled from source and from .deb package from website and from software centre) but once I click OK from the "Dropbox Installation" dialog box (prompting me to download the proprietary daemon) the installation just freezes with the OK button pressed. When I look at its process in System Monitor its waiting channel is inet_wait_for_connect. I have set the following proxy directives thus far: Added mj22:**@proxy.waikato.ac.nz:80 information to network proxy settings under network in settings. Added http_host and http_port variables under gconf-editor-system-proxy Added 'host', 'authentication_password' 'authentication_user' and ticked 'user authentication' and 'use_http_proxy' under gconf-editor-system-http_proxy Added export http_proxy="http://mj22:**@proxy.waikato.ac.nz:80/" to /etc/bash.bashrc Added Acquire::http::proxy "http://mj22:**@proxy.waikato.ac.nz:80/"; to /etc/apt/apt.conf (which is what I imagine is letting Software Center retrieve packages). (where ** is my password) I have also added the equivalent ftp and https lines for the above entries. I get the internet fine and Software Centre can download packages but thats it. Related issues: The software centre can't fetch reviews (but can download packages). When trying to add an online account in Gnome 3 a dialog pop up appears with "Error getting a Request Token: Cannot connect to proxy (proxy.waikato.ac.nz)" Updates: After some time (10mins ish) Dropbox shows an error dialog box that reads: Trouble connecting to Dropbox servers. Maybe your internet connection is down, or you need to set you http_proxy environment variable. Is there a way I can see what environment variables are currently set?

    Read the article

  • Run a startup script with lightdm

    - by cheshirekow
    I have a tablet PC and the graphics driver doesn't support xrandr, so in order to rotate the screen I run a script which changes the Xorg.conf file and then restarts lightdm. I also have a script which uses xsetwacom and xinput to change the rotation of the input devices so that the match the new orientation. I've learned how to get the script to run when I login, but I'd like it to run before I login, so that I don't have to enable auto-login with lightdm. I do need it to run though, or the input (touch and pen) is rotated with respect to the screen, so that when I touch the screen the input is in a completely different area, making it really difficult to use the onscreen keyboard. I've looked at other questions on this site. I've tried putting my script in /etc/Xsession.d but that didn't seem to work. I also tried putting it in /etc/rc.local but I think that is the wrong place, nothing seems to happen. I've also tried googling for lightm script hooks, and various other google terms. Any suggestions? Edit 1: After doing some research, it seems to me that it might not be that I want to run a script with lightdm, but rather with the lighdm greeter (in this case, I think the unity-greeter?). Are there any script-hooks for the unity-greeter?

    Read the article

  • OS X Mavericks Won't Connect To Ubuntu Server (Netatalk, Avahi)

    - by Andy Ibanez
    I'm really sorry for posting this. I know it may have been asked a thousand times. I have googled like crazy and I'm on the verge of desperation here. Basically, I followed this guide: http://motionsoundfx.com/2012/05/ubuntu-vnc-afp-macosx/ To create a small personal file server. When I installed it, I was able to connect to it just fine, I connected with my Ubuntu username and password and I was able to see the home directory. But later, I had to restart the file server so I could prepare a couple of other hard drives to put in. When the server restarted, I tried to connect to it, but I got an error message on my Mac: "The version of the server you're trying to connect to is not supported. Please contact your system administrator to solve this problem." Again, I have googled like crazy for this, and everybody says it is a problem with OS X Lion and up (assuming it affects Mavericks too). I have tried all the fixes mentioned for Lion and Mountain Lion and I haven't had any luck. That's the reason I'm posting this here: I suspect the problem is with my Ubuntu server. This happened after I restarted the server. Before restarting the server, I just put in my credentials and saw my home directory. Something when I restarted the server must have been messed up. I have found some other solutions, including to use "SHX2" in the conf file, but it hasn't worked for me. I ask for your help to solve this issue. Also please understand I'm completely illiterate when it comes to Linux. This is a nice chance to me to learn the OS so please give me detailed steps to do things if you deem it necessary. Thank you! I'm using Ubuntu Server 13.10 (the latest one as of today).

    Read the article

  • Android device unable to obtain ip address connecting to AP created with Hostapd

    - by user114392
    I have a wired internet connection that works behind an authenticated proxy server. I followed the steps mentioned here and managed to create a hotspot which my google nexus 7 detects. However, it seems stuck at "obtaining an ip address" and is not able to connect to the internet. I initially received the following error message when running the script in the terminal: dnsmasq: failed to create listening socket for 127.0.0.1: Address already in use [fail] I figured it is because of a conflict with the network manager, I commented out the "dns=dnsmasq" line in the nm configuration file. After a network-manager restart, the first error doesn't show up but I get the following: Configuration file: /etc/hostapd.conf Failed to create interface mon.wlan0: -23 (Too many open files in system) Try to remove and re-create mon.wlan0 In both cases, however, the hotspot is created and is detected by my android device. only that it cannot "obtain an ip address" and connect to it. Is it because my eth0 connects via a proxy server? Or could there be something wrong with the dnsmasq config? Any help would be appreciated.

    Read the article

  • Loading the Cache from the Business Application Server

    - by ACShorten
    By default, the Web Application server will directly connect to the Database to load its cache at startup time. Customers, who implement the product installation in distributed mode, where the Web Application Server and Business Application Server are deployed separately, may wish to prevent the Web Application Server to connect to the database directly. Installation of the product in distributed mode was introduced in Oracle Utilities Application Framework V2.2. In the Advanced Web Application Server configuration, it is possible to set the Create Simple Web Application Context (WEBAPPCONTEXT) to true to force the Web Application Server to load its cache via the Business Application rather than direct loading. The value of false will retain the default behavior of allowing the Web Application Server to connect directly to the database at startup time to load the cache. The value of true will load the cache data via direct calls to the Business Application Server, which can cause a slight delay in the startup process to cater for the architecture load rather than the direct load. The impact of the settings is illustrated in the figure below:                             When setting this value to true, the following properties files should be manually removed prior to executing the product: $SPLEBASE/etc/conf/root/WEB-INF/classes/hibernate.properties $SPLEBASE/splapp/applications/root/WEB-INF/classes/hibernate.properties Note: For customers who are using a local installation, where the Web Application Server and Business Application Server are combined in the deployed server, it is recommended to set this parameter to false, the default, unless otherwise required. This facility is available for Oracle Utilities Application Framework V4.1 in Group Fix 3 (via Patch 11900153) and Patch 13538242 available from My Oracle Support.

    Read the article

  • How can I make PDFs appear life-size when displayed at 100%?

    - by ændrük
    When I open a letter size PDF and then zoom to 100%, the page physically displayed on my monitor is smaller than a real letter size sheet of paper. How can I make "100%" on the computer screen correspond with "100%" in real life? Details This message suggests that I should be investigating the system-wide DPI settings for my monitor. xdpyinfo reports: dimensions: 1024x768 pixels (271x203 millimeters) resolution: 96x96 dots per inch My monitor has a native display resolution of 1024x768 pixels and a diagonal display size of 12.07 inches. PX CALC returns the following information: DPI: 106.05 Dot Pitch: 0.2395mm Size: 9.66" × 7.24" (24.53cm × 18.39cm) What I've tried so far Running xrandr --dpi 106.05 successfully caused my PDF to appear actual size at 100%, but this effect was lost after rebooting. To make the setting persistent I tried creating the following /etc/X11/xorg.conf: Section "Monitor" Identifier "ThinkPad X60 LCD" DisplaySize 245 183 EndSection Section "Screen" Identifier "Screen0" Monitor "ThinkPad X60 LCD" EndSection After re-logging in, /var/log/Xorg.0.log contained [ 1167.824] (**) intel(0): Display dimensions: (245, 183) mm [ 1167.824] (**) intel(0): DPI set to (106, 106) but xdpyinfo still reported dimensions: 1024x768 pixels (271x203 millimeters) resolution: 96x96 dots per inch and "100%" still appeared too small. Link to XRANDR wiki Link to making XRANDR changes persistant

    Read the article

  • mediatomb fails with "respawning too fast, stopped"

    - by felix
    When I try to start mediatomb it fails. I see this in dmesg [...] [916349.374331] init: mediatomb main process ended, respawning [916349.394462] init: mediatomb main process (880) terminated with status 1 [916349.394512] init: mediatomb main process ended, respawning [916349.414598] init: mediatomb main process (882) terminated with status 1 [916349.414647] init: mediatomb respawning too fast, stopped My current /etc/init/mediatomb.conf looks like this. description "MediaTomb UPnP media server" author "Daniel van Vugt <vanvugt in launchpad>" start on (local-filesystems and net-device-up IFACE!=lo) stop on runlevel [!2345] respawn env CONFIGXML=/etc/mediatomb/config.xml env LOGFILE=/var/log/mediatomb.log env DEFAULT=/etc/default/mediatomb script [ -r $DEFAULT ] && . $DEFAULT [ ! $USER ] && USER=root [ ! $GROUP ] && GROUP=$USER if [ -n "$INTERFACE" ]; then INTERFACE_ARG="-e $INTERFACE" $ROUTE_ADD $INTERFACE fi exec mediatomb \ -c $CONFIGXML \ -u $USER \ -g $GROUP \ -l $LOGFILE \ $INTERFACE_ARG \ $OPTIONS end script post-stop script [ -r $DEFAULT ] && . $DEFAULT if [ -n "$INTERFACE" ]; then $ROUTE_DEL $INTERFACE fi end script

    Read the article

  • After upgrading to 12.04 from 10.10 my mythbuntu standard MCEUSB remote no longer works

    - by keepitsimpleengineer
    I had no problems using my Windows Media Center Remote with 10.10 Mythbuntu, but after upgrading, it no longer affects Mythbuntu. I have verified and re-installed it in Mythbuntu Control Centre. I have used irw to verify the ir buttons actions are properly received by the HTPC. How do I go about fixing this? 3.2.0-26-generic (#41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012) Xorg version: 1.11.3 (16 July 2012 08:06:31PM) GCC: 4.6 (x86_64-linux-gnu) Current updates as of 2012?07?21 $cat /etc/lirc/hardware.con #Chosen Remote Control REMOTE="Windows Media Center Transceivers/Remotes (all)" REMOTE_MODULES="lirc_dev mceusb" REMOTE_DRIVER="" REMOTE_DEVICE="/dev/lirc0" REMOTE_SOCKET="" REMOTE_LIRCD_CONF="mceusb/lircd.conf.mceusb" REMOTE_LIRCD_ARGS="" #Chosen IR Transmitter TRANSMITTER="None" TRANSMITTER_MODULES="" TRANSMITTER_DRIVER="" TRANSMITTER_DEVICE="" TRANSMITTER_SOCKET="" TRANSMITTER_LIRCD_CONF="" TRANSMITTER_LIRCD_ARGS="" #Enable lircd START_LIRCD="true" #Don't start lircmd even if there seems to be a good config file #START_LIRCMD="false" #Try to load appropriate kernel modules LOAD_MODULES="true" # Default configuration files for your hardware if any LIRCMD_CONF="" #Forcing noninteractive reconfiguration #If lirc is to be reconfigured by an external application #that doesn't have a debconf frontend available, the noninteractive #frontend can be invoked and set to parse REMOTE and TRANSMITTER #It will then populate all other variables without any user input #If you would like to configure lirc via standard methods, be sure #to leave this set to "false" FORCE_NONINTERACTIVE_RECONFIGURATION="false" START_LIRCMD="" # lsusb | grep -i infrared Bus 003 Device 002: ID 0471:0815 Philips (or NXP) eHome Infrared Receiver

    Read the article

  • Swap, Swapiness and Standby: swapping starts when waking up

    - by mdo
    I'm running running Ubuntu 12.04 on a Lenovo W500 (Core2Duo T9400, 4GB Ram) Current kernel: 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux -- but the problems exists since a couple of months, surviving quite a few software (includig kernel) updates I regularly put my machine into suspend-to-ram (S3) and when the machine comes back up Ubuntu starts to swap out processes. I was able to observe that the used swap-space starts to grow right after the box returns. See munin graphs below, the gap (obviously) shows the timeframe in STR. Needless to say that the box becomes unusable while swapping, load goes up beyond 10. What I've done so far: lowered swappiness from default (60) to 10 (via /etc/sysctl.conf: vm.swappiness=10) -- this has improved the situation much, but sometimes the problem comes back, I have not found a trigger (like memory usage) for this for now lowered swappiness to 5 -- perhaps this has brought an improvement again Before going to STR the box ran stable without (swapping) problems for hours. Today when the issue showed up again I used this script (- http://stackoverflow.com/questions/479953/how-to-find-out-which-processes-are-swapping-in-linux) to find what processes have the most used swap space. The result after the swap orgy is like that (all PIDs with more than 10M usage): Overall swap used: 2121344 kB ======================================== kB pid name ======================================== 439520 17491 java 208148 22719 firefox 136640 4337 /usr/bin/quodli 120852 5271 chrome 81832 5264 chrome 74284 17003 chrome 65368 16960 chrome 57088 3675 chrome 56184 30923 chrome 54412 11331 chrome 54264 3878 chrome 51508 18382 chrome 50088 3163 zeitgeist-fts 49772 15543 chrome 41344 15355 compiz 35040 1161 mysqld 32124 18374 chrome 30940 11339 chrome 30044 5752 chrome 28780 4235 plugin-containe 24576 31246 empathy-chat 23840 17703 chrome 22512 3207 ubuntuone-syncd 21588 1937 ntop 18336 2021 asterisk 17200 3915 chrome 13964 1935 Xorg 12036 10679 chrome 11104 30782 empathy 11056 2889 python 10932 16565 knotify4 The java instance at the top is IntelliJ. IntelliJ, Firefox and Chrome also were all used right before the box was put to STR. So my question is: can I somehow prevent these swapouts AND why do they happen? Is it perhaps related to some misidentification of idle processes? I'm not looking for resolutions like: turn off swap buy more RAM Thanks in advance!

    Read the article

  • How to get Broadcom BCM 43XX Wireless card working

    - by Fer1805
    NOTE - Although this question is for a specific version of Ubuntu and a specific Broadcom model, the answer to it is for most Broadcom models and versions of Ubuntu 11.04, 11.10, 12.04 and 12.10. If you have come here from another question, feel free to read the answer instead. The answer covers many problems with several solutions. I'm having serious problems installing the Broadcom drivers for Ubuntu 11.04. It worked perfectly on my previous version, but now, it is impossible. I'm a user with no advance knowledge in Linux, so I would need clear explanations on make, compile, etc. I was following the instructions on the following blog, with no luck. How can I get Broadcom BCM4311 Wireless working? Can someone help me? Edit: For the command: "lspci | grep Network", I get the following message: 06:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) For the command: iwconfig, i get the following: lo no wireless extensions. eth0 no wireless extensions. When i follow the following steps (from the above link), there are a NO error message at all: open the 'Synaptic Package Manager' and search for bcm uninstall the bcm-kernel-source package make sure that the firmware-b43-installer and the b43-fwcutter packages are installed type into terminal: cat /etc/modprobe.d/* | egrep '8180|acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|witch|wl' (you may want to copy this) and see if the term blacklist bcm43xx is there if it is, type cd /etc/modprobe.d/ and then sudo gedit blacklist.conf put a # in front of the line: blacklist bcm43xx then save the file (I was getting error messages in the terminal about not being able to save, but it actually did save properly). reboot 'End of procedure' Before (not ubuntu 11.04), if i wanted to connect wireles, i just went to the icon at the upper side of the screen, click, showed ALL the wireless network available, and done. Now, the only options i see are: Wired Network Auto Eth0 Disconnect VPN Enable networking Connection information Edit connection. hope above info is enough for your help.

    Read the article

  • Bizarre image loading problem from apache2

    - by NateDSaint
    Users have complained a few times about seeing a bizarre set of pink or green stripes on our webpage. At first I thought there were a rash of video card outages, but then someone sent me a screenshot from their browser (IE8). I later saw the same thing, but with slightly different colors on Chrome. Users have experienced this on their iPads and iPhones (iOS Safari). Because I've optimized the site to cache images, the bad image stays around until you clear your cache, so once you do, it resolves itself. My assumption is that the transmission of the image is being cut off mid-stream and then staying that way, but I can't for the life of me figure out why. Here's what I've checked: Header length is being sent, and transmission looks okay (wget sample below): wget http://www.superiorlivestock.com/templates/sla2/images/wallbg2.jpg --2012-04-05 08:46:00-- http://www.superiorlivestock.com/templates/sla2/images/wallbg2.jpg Resolving www.superiorlivestock.com (www.superiorlivestock.com)... [ip redacted] Connecting to www.superiorlivestock.com (www.superiorlivestock.com)|[ip redacted]|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 45926 (45K) [image/jpeg] Saving to: `wallbg2.jpg' Images are not being served gzipped (apache conf below): SetOutputFilter DEFLATE SetEnvIfNoCase Request_URI \.(?:gif|jpe?g|png)$ no-gzip dont-vary The site is www.superiorlivestock.com, and here's a sample of the bad page load: Is there something obvious I'm missing? Am I saving my images in the wrong format somehow?

    Read the article

  • Change power button to 'Ask' in Xubuntu 13.10

    - by Gully.Moy
    I have recently installed Xubuntu 13.10 on my Vaio vpcea making me a Linux beginner. The problem is that laptop's power button is right on the edge of the bezel making it far too easy to press accidentally, in my opinion a design fault by Sony. At present, when I press the power button it shuts down strait away and as you can imagine, when I'm accidentally pressing it all the time it gets very annoying! So I planned to change it to ask what I would like to do when I press it or at least ask if I'm sure. So I went through the xfce GUI options "Settings Manager" - "Power Manager" to the field "When power button is pressed", but it was already set to "Ask". So I did some digging and found a thread telling me to navigate to /etc/xdg/xfce4/xfconf/xfce-perchannel-xml/xfce4-power-manager.xml where it said to find power-button-action and check that value="3". It already did. So I looked some more and found this thread which focuses on acpi scripts. I tried solution 1 & 2 using sudoedit to change the files accordingly (I have made executable bash shell scripts already so I think I followed them correctly), but still no difference. I also found this thread which instructed me to edit /etc/systemd/logind.conf so that HandlePowerKey=ignore. Still no luck. I even tried my own approach to completely disable /etc/acpi/powerbtn.sh by renaming it powerbtn.sh.bak hoping for at least no response from the power button... and I have done many reboots in between... but still it shuts down! I have also read that some people have the file /etc/acpi/events/power_button, but I do not. So does anyone have any other ideas? What else could be executing the shutdown sequence Is there something I'm missing? I haven't undone any of these actions so every one of the above files is currently edited on my computer, with the exception that "Solution 2" automatically undone "Solution 1" above. Thanks guys.

    Read the article

  • Nginx or Apache for a VPS?

    - by James
    I consider myself to be an inexperienced user/administrator when it comes to running my VPS. I can get by with a few CLI commands, I can set up Webmin and I can set up Yum repos, but beyond the very basic stuff, I'm out of my depth. So far, I'm running Apache. I don't know it particularly well, but I can get by with editing httpd.conf if I'm told what to edit. I've heard good things about Nginx and that it's not as resource-hungry as Apache. I'd like to give it a go, but I can't find any information about its suitability for administrators like me, with little experience of sysadmin or web server config. Webmin now has support for Nginx, so getting it installed and running probably won't be too much of a problem. What I'm wondering is, from a site administrator perspective, is running Nginx as transparent as running Apache? IE, at the moment, I can just throw up Wordpress and Drupal sites without having much to worry about or having to make any config changes to Apache. Would Nginx be as transparent?

    Read the article

  • How to reset display settings in XFCE \ Ubuntu 12.04 and also flgrx drivers

    - by Agent24
    I recently upgraded to Ubuntu 12.04 and since I hate unity I installed the Xubuntu package and am using XFCE instead. Since I have a Radeon HD5770 I also installed the fglrx drivers. This all went fine (aside from the fact that the post-release update fglrx drivers have an error on installation and Ubuntu thinks they're not installed when they actually are. I configured my display settings (dual monitors, a 17" CRT on VGA and a 17" LCD on DVI) in the amdcccle program and everything was perfect. THEN, 2 days ago, I accidentally clicked on the "Display" settings in XFCE "settings" manager. After that, everything got screwed. Now, I normally run the CRT at 1152x854 and the LCD at 1280x1024 with the CRT as my primary monitor (with panel) and the LCD without panels etc just to display other windows when I want to drag them over there. The problem is now that if I set my CRT to 1152x864, it stays at 1280x1024 virtually and half the stuff falls off the screen. It also puts the LCD at 1280x1024 BUT then overlays the CRT's display ontop with different wallpaper in an L shape down the right-hand and bottom edges. In short, nothing makes sense and everything is FUBAR. I tried uninstalling fglrx through synaptic, and renaming xorg.conf and also the xfce XML file that has monitor settings but it still won't make sense. Unity on the other hand can currently set everything normally so the problem appears to be only with XFCE. In any case, I can't even get the fglrx drivers back, when I re-installed them, I can't run amdccle anymore as it says the driver isn't installed!! Can someone help me reset my XFCE settings so the monitors aren't screwed with some incorrect virtual desktop size and also so I can get fglrx drivers back and working? I really don't want to have to format and reinstall and go through all the hassle but it looks like I may have to :(

    Read the article

  • updatedb & locate command problem - Files from external hard drive are no longer indexed after rebooting

    - by user784637
    Files from my external hard drive are no longer indexed after rebooting. I have to remount and then run # updatedb after each reboot. The problem is updatedb takes a few minutes for my external hard drives. Is there any way I can retain indexing for my externals after I reboot so that the locate command can search through my externals? EDIT: Per Request here are my specs: $ cat /etc/updatedb.conf PRUNE_BIND_MOUNTS="yes" # PRUNENAMES=".git .bzr .hg .svn" PRUNEPATHS="/tmp /var/spool /media" PRUNEFS="NFS nfs nfs4 rpc_pipefs afs binfmt_misc proc smbfs autofs iso9660 ncpfs coda devpts ftpfs devfs mfs shfs sysfs cifs lustre_lite tmpfs usbfs udf fuse.glusterfs fuse.sshfs ecryptfs fusesmb devtmpfs" # mount /dev/sda5 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/me/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=me) /dev/sdb1 on /media/me type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) /dev/sdd1 on /media/Little Boy type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) /dev/sde1 on /media/Fat Man type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) # on_ac_power; echo $? 255

    Read the article

  • rkhunter: right way to handle warnings further?

    - by zuba
    I googled some and checked out two first links it found: http://www.skullbox.net/rkhunter.php http://www.techerator.com/2011/07/how-to-detect-rootkits-in-linux-with-rkhunter/ They don't mention what shall I do in case of such warnings: Warning: The command '/bin/which' has been replaced by a script: /bin/which: POSIX shell script text executable Warning: The command '/usr/sbin/adduser' has been replaced by a script: /usr/sbin/adduser: a /usr/bin/perl script text executable Warning: The command '/usr/bin/ldd' has been replaced by a script: /usr/bin/ldd: Bourne-Again shell script text executable Warning: The file properties have changed: File: /usr/bin/lynx Current hash: 95e81c36428c9d955e8915a7b551b1ffed2c3f28 Stored hash : a46af7e4154a96d926a0f32790181eabf02c60a4 Q1: Is there more extended HowTos which explain how to deal with different kind warnings? And the second question. Were my actions sufficient to resolve these warnings? a) To find the package which contains the suspicious file, e.g. it is debianutils for the file /bin/which ~ > dpkg -S /bin/which debianutils: /bin/which b) To check the debianutils package checksums: ~ > debsums debianutils /bin/run-parts OK /bin/tempfile OK /bin/which OK /sbin/installkernel OK /usr/bin/savelog OK /usr/sbin/add-shell OK /usr/sbin/remove-shell OK /usr/share/man/man1/which.1.gz OK /usr/share/man/man1/tempfile.1.gz OK /usr/share/man/man8/savelog.8.gz OK /usr/share/man/man8/add-shell.8.gz OK /usr/share/man/man8/remove-shell.8.gz OK /usr/share/man/man8/run-parts.8.gz OK /usr/share/man/man8/installkernel.8.gz OK /usr/share/man/fr/man1/which.1.gz OK /usr/share/man/fr/man1/tempfile.1.gz OK /usr/share/man/fr/man8/remove-shell.8.gz OK /usr/share/man/fr/man8/run-parts.8.gz OK /usr/share/man/fr/man8/savelog.8.gz OK /usr/share/man/fr/man8/add-shell.8.gz OK /usr/share/man/fr/man8/installkernel.8.gz OK /usr/share/doc/debianutils/copyright OK /usr/share/doc/debianutils/changelog.gz OK /usr/share/doc/debianutils/README.shells.gz OK /usr/share/debianutils/shells OK c) To relax about /bin/which as I see OK /bin/which OK d) To put the file /bin/which to /etc/rkhunter.conf as SCRIPTWHITELIST="/bin/which" e) For warnings as for the file /usr/bin/lynx I update checksum with rkhunter --propupd /usr/bin/lynx.cur Q2: Do I resolve such warnings right way?

    Read the article

  • How can I run this script on startup, restart, and shutdown?

    - by Exeleration-G
    I'm using Ubuntu 11.10. I've written a script, that synchronises a directory in ~ with a directory on /dev/sda4, using Unison. Before, I had this script running every five minutes with no problems, using crontab. Right now, I want to execute this script at startup, restart and shutdown only. This is what the script looks like: #!/bin/bash unison -perms 0 -batch "/mnt/Data/Syncfolder/" "/home/myname/Syncfolder/" My crontab configuration was as follows: m h dom mon dow command 0,5,10,15,20,25,30,35,40,45,50,55 * * * * sh /usr/local/bin/s4lj.bash Note that I copied the script from ~ to /usr/local/bin/ first, to avoid root problems. I've read How to execute script on shutdown? and How to write an init script that will execute an existing start script?. After doing that, I've done this: I've made s4lj.bash executable, and then copied it to /etc/init.d/. For startup, I've made a symlink in /etc/rc2.d/ to /etc/init.d/s4lj.bash, and renamed it to S70s4lj.bash. For restart, I've made a symlink in /etc/rc6.d/ to /etc/init.d/s4lj.bash, and renamed it to K70s4lj.bash. For shutdown, I've made a symlink in /etc/rc0.d/ to /etc/init.d/s4lj.bash, and renamed it to K70s4lj.bash. Still, the script won't be run in any of these situations. How can I make the script get executed? I'd be happiest with a proper *.conf file in /etc/init. Thanks in advance.

    Read the article

  • How to install Oracle Database 11g Express Edition on Ubuntu 12.10?

    - by Praneeth Pj
    I installed the Oracle database following the steps mentioned in this blog. Downloaded 11g express edition Created a new user oracle under the group dba. Following steps are executed using this. Unzipped oracle-xe-11.2.0-1.0.x86_64.rpm.zip and then converted the rpm to the Ubuntu package by running: sudo alien --scripts -d oracle-xe-11.2.0-1.0.x86_64.rpm Created /sbin/chkconfig file and added the entries as specified there. Created /etc/sysctl.d/60-oracle.conf and added the entries as specified in the same link as above. Running the commands: ln -s /usr/bin/awk /bin/awk mkdir /var/lock/subsys touch /var/lock/subsys/listener .deb generated in step 3: sudo dpkg --install oracle-xe_11.2.0-2_amd64.deb Left the default values as it is: sudo /etc/init.d/oracle-xe configure Set the following env variables in ~/.bashrc file: export ORACLE_HOME=/u01/app/oracle/product/11.2.0/xe export ORACLE_SID=XE export NLS_LANG=`$ORACLE_HOME/bin/nls_lang.sh` export ORACLE_BASE=/u01/app/oracle export LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH export PATH=$ORACLE_HOME/bin:$PATH Running the commands: chown -R oracle:dba /var/tmp/.oracle chmod -R 755 /var/tmp/.oracle chown -R oracle:dba /tmp/.oracle chmod -R 755 /tmp/.oracle Starting Oracle Database 11g Express Edition instance: sudo service oracle-xe start sqlplus / as sysdba and got the following: SQL*Plus: Release 11.2.0.2.0 Production on Thu Jan 3 09:41:58 2013 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to an idle instance. Now when exectuting any SQL statements on SQLplus, I end up with the following error: SQL> select * from dual; select * from dual * ERROR at line 1: ORA-01034: ORACLE not available Process ID: 0 Session ID: 0 Serial number: 0 I have increased the swap memory as specified here $ free -m total used free shared buffers cached Mem: 3901 3428 473 0 182 1988 -/+ buffers/cache: 1258 2643 Swap: 5066 0 5066

    Read the article

< Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >