Search Results

Search found 6682 results on 268 pages for 'choose'.

Page 136/268 | < Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >

  • Why is C++ backward compatibility important / necessary?

    - by Giorgio
    As far as understand it is a well-established opinion within the C++ community that C is an obsolete language that was useful 20 years ago but cannot support many modern good programming practices, or even encourages bad practices; certain features that were typical of C++ (C with classes) during the nineties are also obsolete and considered bad practice in modern C++ (e.g., new and delete should be replaced by smart pointer primitives). In view of this, I often wonder why backward compatibility with C and obsolete C++ features is still considered important: to my knowledge there is no 100% compatibility, but most of C and C++ are contained in C++11 as a subset. Of course, there is a lot of legacy code and libraries (possibly containing templates) that are written using a previous standard of the language and which still need to be maintained or used in connection with new code. Nevertheless, maybe it would still be possible to drop obsolete C and C++ features (e.g. the mentioned new / delete) from a future C++ standard so that it is impossible to use them in new code. In this way, old and dangerous programming practices would be quickly banned from new code, and modern, better programming practices would be enforced by the compiler. Legacy code could still be maintained using separate compilation (having C alongside C++ source files is already a common practice). Developers would have to choose between one compiler supporting the old-style C++ that was common during the nineties and a compiler supporting the modern C++? style (the question mark indicates a future, hypothetical revision). Only mixing the two styles would be forbidden. Would this be a viable strategy for encouraging the adoption of modern C++ practices? Are there conceptual reasons or technical problems (e.g. compiling existing templates) that make such a change undesirable or even impossible? Has such a development been proposed in the C++ community. If there has been some extended discussion on the topic, is there any material on-line?

    Read the article

  • First Stable Version of Opera 15 has been Released

    - by Akemi Iwaya
    Opera has just released the first stable version of their revamped browser and will be proceeding at a rapid pace going forward. There is also news concerning the three development streams they will maintain along with news of an update for the older 12.x series for those who are not ready to update to 15.x just yet. The day is full of good news for Opera users whether they have already switched to the new Blink/Webkit Engine version or are still using the older Presto Engine version. First, news of the new development streams… Opera has released details outlining their three new release streams: Opera (Stable) – Released every couple of weeks, this is the most solid version, ready for mission-critical daily use. Opera Next – Updated more frequently than Stable, this is the feature-complete candidate for the Stable version. While it should be ready for daily use, you can expect some bugs there. Opera Developer – A bleeding edge version, you can expect a lot of fancy stuff there; however, some nasty bugs might also appear from time to time. From the Opera Desktop Team blog post: When you install Opera from a particular stream, your installation will stick to it, so Opera Stable will be always updated to Opera Stable, Opera Next to Opera Next and so on. You can choose for yourself which stream is the best for you. You can even follow a couple of them at the same time! Of particular interest is the announcement of continued development for the 12.x series. A new version (12.16) is due to be released soon to help keep the older series up to date and secure while the transition process from 12.x to 15.x continues.    

    Read the article

  • C#.NET vs VB.NET, Which language is better?

    Features I cannot say any language good or bad as long as it's compiler can produce MSIL can run under .NET CLR. If someone says C# has more futures, you can understand that those new features are of C# compiler but not .NET, because if C# has a specific future then CLR cannot understand them. So the new features of C# will have to convert to the code understood by CLR eventually. that means the new features are developed for C# compiler basically to facilitates the developer to write their code in better way. so that means no difference in feature list between C# and VB.NET if you think in CLR perspective. Ease of writing Code I feel writing code in C# is easy, because my background is C and C++, Java, syntaxes very are similar. I assume most developers feel the same. Readability But some people say VB.NET code most readable for the members who are from non technical background, because keywords are generally in English rather special charectors. No of Projects in Market I assume 80 percent of market uses C# in their .NET development. for example in my company many projects are there .nET and all are using C#. Productivity & Experience though the feature list is same, generally developers wants to write code in their familiar languages. because it increase the productivity. Hope this helps to choose the language which suits for you. span.fullpost {display:none;}

    Read the article

  • Does it matter to you that a software is "available source" but not "open source"

    - by ccpod
    You probably know the list of open source licenses officially approved by the OSI. Most notably I guess would be the GPL, MIT, [insert your favorite license here]. I recently ran into a project which although was open source (the creator made all source code available), was not officially open source under one of those official licenses. It released the source, but made no promise to release the source in the future. It allowed modification suggestions, but made no promises to accept patches and disallowed external distribution of externally-patched versions. It allowed the use of the software in commercial or paid projects, but disallowed the sale of the software itself. I suppose it could be called "available source" not open source as we like to think of it. I can see why the management team of a company wouldn't want to do business with this software. They can't fork it, they can't sell it, they can't create their own version of the software and distribute it or sell it. But would it matter to you as part of a software engineering team who's just using this software? I can still get my work done with it, I can use it in a project for which I'm paid (but I can't sell the software itself, which I'm not in the business of doing anyway), and I can make changes to the code to make it behave differently for my needs (but I can't make those modifications public), and if I do want those modifications officially made available to others, the approval is up to the project itself and they choose whether to incorporate them in an official release or not. So we know that a company that wants to base its business on this "available source" software can't do that, but as someone from the software engineering team, would those differences matter to you or do they seem less relevant? Curious what others think of this.

    Read the article

  • Borrow Harry Potter’s eBooks from Amazon Kindle Owner’s Lending Library

    - by Rekha
    From June 19, 2012, Amazon.com customers can borrow All 7 Harry Potter books from Kindle Owner’s Lending Library (KOLL). The books are available in English, French, Italian, German and Spanish. Prime Members of Amazon owning Kindle, can choose from 145,000 titles. US customers can borrow for free with no due dates and also as frequently as a month. There are no limits on the number of copies available for the customers. Anyone can read the books simultaneously by borrowing them. The bookmarks in the borrowed books are saved, for the customers to continue reading where they stopped even when they re-borrow the book. Prime members also have the opportunity to enjoy free two day shipping on millions of items and  unlimited streaming of over 18,000 movies and TV episodes. Amazon has got an exclusive license from J.K. Rowling’s Pottermore. The series cost between $7.99 and $9.99 for the individual books. Pottermore’s investment on these books are compensated by Amazon’s large payment. Via Amazon. CC Image Credit Amazon KOLL.

    Read the article

  • help! corrupt file recovery

    - by TheBumpper
    My supervisor computer crashed last night, and I'm trying to help him out. He made an R script but when he tried to open it, it was empty. But for some reason the file is 7.9kb so it should not be empty i think... anyway when i tried to open it, Gedit gave this error: "The file you opened has some invalid characters. If you continue editing this file you could corrupt this document. You can also choose another character encoding and try again." and the options to encode the characters. It looked like this(with a red background): \00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\ My question is, is there a way to restore the file? i hope someone has a brilliant idea

    Read the article

  • Desktop Fun: 21 Cool Ubuntu Wallpapers

    - by Vivek
    Ubuntu 10.04 was released last month, and comes with some breath taking design enhancements, and has some fabulous art work integrated into it. We’ve put together a collection of wallpapers to make it more customized. We thought of pulling out some of the best Ubuntu wallpapers in this post so that you have a good mix to choose from when you are slightly bored of the default Lucid Lynx (Ubuntu 10.04) wallpaper. The following is a collection of top 21 Ubuntu wallpapers. To download the wallpaper just click on the hyperlink above the image. Ubuntu Wallpapers EgFox Lucid Lynx Blue 2010 by ~Eg-Art EgFox Lucid Lynx K HD 2010 by ~Eg-Art Lucid Lynx 10 04 by ~Momez Ubokeh Wallpaper Pack by ~giantspeck lucid fog brown by ~darkburt EgFox Lucid Lynx HD 2010 by ~Eg-Art LTS 2010 by ~alkore31 Ubuntu Bokeh by ~ttk1opc Ubuntu Aurora by *monkeymagico Ubuntu by ~gorkisview Ubuntu Glow by ~BigAction Destroy Ubuntu by ~lukeroberts Ubuntu Triskell by ~deviantdark Ubuntu 2.0 by ~monsteer Ubuntu leaves by ~sizakor Ubuntu Bokeh by ~freyr Ubuntu Brown leather distress by *monkeymagico Ubuntu Black Metal Hex by *monkeymagico Ubuntu gusty 4 walls by ~yf19-sama Ubuntu Wallpaper by ~Ruzzy2006 ubuntu-Gloss by ~SWOriginal Enjoy the new wallpaper to suit your desktop. You also might want to make sure and check out our Desktop Fun section for more collections of cool wallpapers. Similar Articles Productive Geek Tips Windows 7 Welcome Screen Taking Forever? Here’s the Fix (Maybe)Allow Remote Control To Your Desktop On UbuntuCheck your Disk Usage on Ubuntu from the command lineDual Monitors: Use a Different Wallpaper on Each Desktop in Windows 7, Vista or XPDesktop Fun: Starship Theme Wallpapers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Enhance Your Laptop’s Battery Life With These Tips Easily Search Food Recipes With Recipe Chimp Tech Fanboys Field Guide Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7

    Read the article

  • LAMP Stack Versioning -- Is there a website or version tracker source to help suggest the right versions of each part of a platform stack?

    - by Chris Adragna
    Taken singly, it's easy to research versions and compatibility. Version information is readily available on each single part of a platform stack, such as MySQL. You can find out the latest version, stable version, and sometimes even the percentage of people adopting it by version (personally, I like seeing numbers on adoption rates). However, when trying to find the best possible mix of versions, I have a harder time. For example, "if you're using MySQL 5.5, you'll need PHP version XX or higher." It gets even more difficult to mitigate when you throw higher level platforms into the mix such as Drupal, Joomla, etc. I do consider "wizard" like installers to be beneficial, such as the Bitnami installers. However, I always wonder if those solutions cater more to the least common denominator -- be all to many -- and as such, I think I'd be better to install things on my own. Such solutions do seem kind of slow to adopt new versions, slower than necessary, I suspect. Is there a website or tool that consolidates versioning data in order to help a webmaster choose which versions to deploy or which upgrades to install, in consideration of all the other parts of the stack?

    Read the article

  • Hudson or Jenkins

    - by Lukas Eder
    We have been using Hudson for quite a while and we loved it. Now many Hudson-developers have "left the building" to create their own: Jenkins (which means the project has been forked). As Hudson/Jenkins users, we are now worried whether we should opt for the original "big and stable" producer Oracle, or the "small and dynamic" newcomer Jenkins. EDIT: Our worries are mainly due to the fact that we did not really hear about this fork/split through any official ways. It looks like a guerilla action including the hijacking of logos and trademarks (after all, the copyright must be at Oracle, no? I'm not sure). So we're kinda missing professionalism here, as in well-organised course of action involving press relases, etc. Maybe we just missed that... What are good objective reasons to decide for either project in the future? Can we postpone that decision until later, or is that too risky? Here's one opinion about this: http://www.itworld.com/development/136173/more-concerns-surface-hudson-jenkins-split Why did you choose either one?

    Read the article

  • Page debugging got easier in UCM 11g

    - by kyle.hatlestad
    UCM is famous for it's extra parameters you can add to the URL to do different things. You can add &IsJava=1 to get all of the local data and result set information that comes back from the idc_service. You can add &IsSoap=1 and get back a SOAP message with that information. Or &IsJson=1 will send it in JSON format. There are ones that change the display like &coreContentOnly=1 which will hide the footer and navigation on the page. In 10g, you could add &ScriptDebugTrace=1 and it would display the list of resources that were called through includes or eval functions at the bottom of the page. And it would list them in nested order so you could see the order in which they were called and which components overrode each other. But in 11g, that parameter flag no longer works. Instead, you get a much more powerful one called &IsPageDebug=1. When you add that to a page, you get a small gray tab at the bottom right-hand part of the browser window. When you click it, it will expand and let you choose several pieces of information to display. You can select 'idocscript trace' and display the nested includes you used to get with ScriptDebugTrace. You can select 'initial binder' and see the local data and result sets coming back from the service, just as you would with IsJava. But in this display, it formats the results in easy to read tables (instead of raw HDA format). Then you can get the final binder which would contain all of the local data and result sets after executing all of the includes for the display of the page (and not just from the Service call). And then a 'javascript log' for reporting on the javascript functions and times being executed on the page. Together, these new data displays make page debugging much easier in 11g. *Note: This post also applies to Universal Records Management (URM).

    Read the article

  • Formatting Keywords to UPPERCASE In Oracle SQL Developer

    - by thatjeffsmith
    I received this question from a customer today, and it took me more than a few minutes to remember where this preference was located in SQL Developer. This tells me that the topic is ripe for blogging How do I go FROM: select * from scott.emp where ename like '%JEFF%' TO SELECT * FROM scott.emp WHERE ename LIKE '%JEFF%' It’s all in the formatting You need to access the formatting preferences under the Tools menu. It takes a bit of navigating to get there, so bear with me: Tools Database SQL Formatter Oracle Formatting Click ‘Edit’ on the profile Other Case change: ‘Keywords Uppercase’ It’s easy to find once you know where to look? You can tell it to leave the case alone, upper everything, upper only the keywords, lower everything. Accessing the Formatter Options We allow separate formatting options for different RDBMS. You need to make sure you’re accessing the ‘Oracle Formatting’ page in the preferences. You can then choose to edit the default options OR you can do what I have done – save the defaults as a new set of options. I’ve called my profile ‘JeffCustom.’ I can now switch back and forth now through different sets of formatting options. You need to hit the ‘Edit’ button to get to the formatting options editor. A good number of people seem to miss this. Select your profile, then hit the ‘Edit’ button

    Read the article

  • Move Files from a Failing PC with an Ubuntu Live CD

    - by Trevor Bekolay
    You’ve loaded the Ubuntu Live CD to salvage files from a failing system, but where do you store the recovered files? We’ll show you how to store them on external drives, drives on the same PC, a Windows home network, and other locations. We’ve shown you how to recover data like a forensics expert, but you can’t store recovered files back on your failed hard drive! There are lots of ways to transfer the files you access from an Ubuntu Live CD to a place that a stable Windows machine can access them. We’ll go through several methods, starting each section from the Ubuntu desktop – if you don’t yet have an Ubuntu Live CD, follow our guide to creating a bootable USB flash drive, and then our instructions for booting into Ubuntu. If your BIOS doesn’t let you boot using a USB flash drive, don’t worry, we’ve got you covered! Use a Healthy Hard Drive If your computer has more than one hard drive, or your hard drive is healthy and you’re in Ubuntu for non-recovery reasons, then accessing your hard drive is easy as pie, even if the hard drive is formatted for Windows. To access a hard drive, it must first be mounted. To mount a healthy hard drive, you just have to select it from the Places menu at the top-left of the screen. You will have to identify your hard drive by its size. Clicking on the appropriate hard drive mounts it, and opens it in a file browser. You can now move files to this hard drive by drag-and-drop or copy-and-paste, both of which are done the same way they’re done in Windows. Once a hard drive, or other external storage device, is mounted, it will show up in the /media directory. To see a list of currently mounted storage devices, navigate to /media by clicking on File System in a File Browser window, and then double-clicking on the media folder. Right now, our media folder contains links to the hard drive, which Ubuntu has assigned a terribly uninformative label, and the PLoP Boot Manager CD that is currently in the CD-ROM drive. Connect a USB Hard Drive or Flash Drive An external USB hard drive gives you the advantage of portability, and is still large enough to store an entire hard disk dump, if need be. Flash drives are also very quick and easy to connect, though they are limited in how much they can store. When you plug a USB hard drive or flash drive in, Ubuntu should automatically detect it and mount it. It may even open it in a File Browser automatically. Since it’s been mounted, you will also see it show up on the desktop, and in the /media folder. Once it’s been mounted, you can access it and store files on it like you would any other folder in Ubuntu. If, for whatever reason, it doesn’t mount automatically, click on Places in the top-left of your screen and select your USB device. If it does not show up in the Places list, then you may need to format your USB drive. To properly remove the USB drive when you’re done moving files, right click on the desktop icon or the folder in /media and select Safely Remove Drive. If you’re not given that option, then Eject or Unmount will effectively do the same thing. Connect to a Windows PC on your Local Network If you have another PC or a laptop connected through the same router (wired or wireless) then you can transfer files over the network relatively quickly. To do this, we will share one or more folders from the machine booted up with the Ubuntu Live CD over the network, letting our Windows PC grab the files contained in that folder. As an example, we’re going to share a folder on the desktop called ToShare. Right-click on the folder you want to share, and click Sharing Options. A Folder Sharing window will pop up. Check the box labeled Share this folder. A window will pop up about the sharing service. Click the Install service button. Some files will be downloaded, and then installed. When they’re done installing, you’ll be appropriately notified. You will be prompted to restart your session. Don’t worry, this won’t actually log you out, so go ahead and press the Restart session button. The Folder Sharing window returns, with Share this folder now checked. Edit the Share name if you’d like, and add checkmarks in the two checkboxes below the text fields. Click Create Share. Nautilus will ask your permission to add some permissions to the folder you want to share. Allow it to Add the permissions automatically. The folder is now shared, as evidenced by the new arrows above the folder’s icon. At this point, you are done with the Ubuntu machine. Head to your Windows PC, and open up Windows Explorer. Click on Network in the list on the left, and you should see a machine called UBUNTU in the right pane. Note: This example is shown in Windows 7; the same steps should work for Windows XP and Vista, but we have not tested them. Double-click on UBUNTU, and you will see the folder you shared earlier! As well as any other folders you’ve shared from Ubuntu. Double click on the folder you want to access, and from there, you can move the files from the machine booted with Ubuntu to your Windows PC. Upload to an Online Service There are many services online that will allow you to upload files, either temporarily or permanently. As long as you aren’t transferring an entire hard drive, these services should allow you to transfer your important files from the Ubuntu environment to any other machine with Internet access. We recommend compressing the files that you want to move, both to save a little bit of bandwidth, and to save time clicking on files, as uploading a single file will be much less work than a ton of little files. To compress one or more files or folders, select them, and then right-click on one of the members of the group. Click Compress…. Give the compressed file a suitable name, and then select a compression format. We’re using .zip because we can open it anywhere, and the compression rate is acceptable. Click Create and the compressed file will show up in the location selected in the Compress window. Dropbox If you have a Dropbox account, then you can easily upload files from the Ubuntu environment to Dropbox. There is no explicit limit on the size of file that can be uploaded to Dropbox, though a free account begins with a total limit of 2 GB of files in total. Access your account through Firefox, which can be opened by clicking on the Firefox logo to the right of the System menu at the top of the screen. Once into your account, press the Upload button on top of the main file list. Because Flash is not installed in the Live CD environment, you will have to switch to the basic uploader. Click Browse…find your compressed file, and then click Upload file. Depending on the size of the file, this could take some time. However, once the file has been uploaded, it should show up on any computer connected through Dropbox in a matter of minutes. Google Docs Google Docs allows the upload of any type of file – making it an ideal place to upload files that we want to access from another computer. While your total allocation of space varies (mine is around 7.5 GB), there is a per-file maximum of 1 GB. Log into Google Docs, and click on the Upload button at the top left of the page. Click Select files to upload and select your compressed file. For safety’s sake, uncheck the checkbox concerning converting files to Google Docs format, and then click Start upload. Go Online – Through FTP If you have access to an FTP server – perhaps through your web hosting company, or you’ve set up an FTP server on a different machine – you can easily access the FTP server in Ubuntu and transfer files. Just make sure you don’t go over your quota if you have one. You will need to know the address of the FTP server, as well as the login information. Click on Places > Connect to Server… Choose the FTP (with login) Service type, and fill in your information. Adding a bookmark is optional, but recommended. You will be asked for your password. You can choose to remember it until you logout, or indefinitely. You can now browse your FTP server just like any other folder. Drop files into the FTP server and you can retrieve them from any computer with an Internet connection and an FTP client. Conclusion While at first the Ubuntu Live CD environment may seem claustrophobic, it has a wealth of options for connecting to peripheral devices, local computers, and machines on the Internet – and this article has only scratched the surface. Whatever the storage medium, Ubuntu’s got an interface for it! Similar Articles Productive Geek Tips Backup Your Windows Live Writer SettingsMove a Window Without Clicking the Titlebar in UbuntuRecover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDCreate a Bootable Ubuntu USB Flash Drive the Easy WayReset Your Ubuntu Password Easily from the Live CD TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Tech Fanboys Field Guide Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals

    Read the article

  • Begin the Clone Wars Have!

    - by Antony Reynolds
    Creating a New Virtual Machine from an Existing Virtual Disk In previous posts I described how I set up an OEL6 machine under VirtualBox that can run an 11gR2 database and FMW 11.1.1.5.  That is great if you want the DB and FMW running in the same virtual image and it has served me well for some proof of concepts and also for some testing of different JVMs.  However I also wanted to run some testing of FMW with the database running on a separate physical machine.  So in this post I will show how to take a VirtualBox image and create a new image based on the disks from that original image. What are my Options? There is more than one way to skin a cat, or in this case to create two separate VMs that can run on different hardware.  Some of the options include: Create new virtual disk images for each new VM. Clone the existing disk images and point the new VM at the cloned images. Point the new VM at the existing snapshots. #1 is too much like hard work, install OEL twice, install a database again, install FMW again, run RCU again!  Life is too short! #2 is probably the safest way of doing things.  VirtualBox allows you to clone a disk image for use in a separate machine.  However this of course duplicates the disk and means that it is now occupying 3 times the space, once for the original disk and twice more for the two clones I would need. #3 is the most space efficient way of doing things.  It does mean however that I can only run the new “cloned” images if I have access to the original image because that is where the base snapshots reside.  However this is not a problem for me as long as I remember to keep all threee images together.  So this is the approach we will follow. Snapshot, What Snapshot? As we are going to create new virtual machines based on existing snapshots we need to figure out which snapshot to use.  We do this by opening the “Media Manager” from within VirtualBox and moving the mouse over the snapshot images until we find the snapshots we want – the snapshot name is identified in the “Attached to:” comment.  In my case I wanted the FMW installed snapshot because that had a database configured for FMW alongside the FMW software.  I made a note of the filename of that snapshot (actually I just noted the first 5 characters as that was all that was needed to uniquely identify the snapshot file). When we create the new machines we will point them at the snapshot filename we have just checked. Network or NotWork? Because we want the two new machines to communicate with each other when hosted in different physical machines we can’t use the default NAT networking mode without a lot of hassle.  But at the same time we need them to have fixed IP addresses relative to each other so that they can see each other whilst also being able to see the outside world. To achieve all these requirements I created two network adapters for each machine.  Adapter 1 was a standard NAT mapping.  This will allow each machine to get a dynamic IP address (10.0.2.15 by default) that can be used to access the external world through the VBox provided NAT gateway.  This is the same as the existing configuration. The second adapter I created as a bridged adapter.  This gives the virtual machine direct access to the host network card and by using fixed IP addresses each machine can see the other.  It is important to choose fixed IP addresses that are not routable across your internal network so you don’t get any clashes with other machines on your network.  Of course you could always get proper fixed IP addresses from your network people, but I have serveral people using my images and as long as I don’t have two instances of the same VM on the same network segment this is easier and avoids reconfiguring the network every time someone wants a copy of my VM.  If it is available I would suggest using the 10.0.3.* network as 10.0.2.* is the default NAT network.  You can check availability by pinging 10.0.3.1 and 10.0.3.2 from your host machine.  If it times out then you are probably safe to use that. Creating the New VMs Now that I had collected the data that I needed I went ahead and created the new VMs. When asked for a “Boot Hard Disk” I used the “Choose a virtual hard disk file…” link to find the snapshot I had previously selected and set that to be the existing hard disk.  I chose the previously existing SOA 11.1.1.5 install for both the new DB and FMW machines because that snapshot had the database with the RCU completed that I wanted for my DB machine and it had the SOA software installed which I wanted for my FMW machine. After the initial creation of the virtual machine go into the network setting section and enable a second adapter which will be bridged.  Make a note of the MAC addresses (the last four digits should be sufficient) of the two adapters so that you can later set the bridged adapter to use fixed IP and the NAT adapter to use DHCP. We are now ready to start the VMs and reconfigure Linux. Reconfiguring Linux Because I now have two new machines I need to change their network configuration.  In particular I need to change the hostname, update the hosts file and change the network settings. Changing the Hostname I renamed both hosts by running the hostname command as root: hostname vboxfmw.oracle.com I also edited the /etc/sysconfig file and set the correct hostname in there. HOSTNAME=vboxfmw.oracle.com Changing the Network Settings I needed to change the network configuration to give the bridged network a fixed IP address.  I first explicitly set the MAC addresses of the two adapters, because the order of the virtual adapters in the VirtualBox Manager is not necessarily the same as the order of the adapters in the guest OS.  So I went in to the System->Preferences->Network Connections screen and explicitly set the “Device MAC address” for the two adapters. Having correctly mapped the Linux adapters to the VirtualBox adapters I then set the Bridged adapter to use fixed IP addressing rather than DHCP.  There is no need for additional routing or default gateways because we expect the two machine to be on the same LAN segment. Updating the Hosts File Having renamed the machines and reconfigured the network I then updated the /etc/hosts file to refer to the new machine name add a new line to the hosts file to provide an additional IP address for my server (the new fixed IP address) add a new line for the fixed IP address of the other virtual machine 10.0.3.101      vboxdb.oracle.com       vboxdb  # Added by NetworkManager 10.0.2.15       vboxdb.oracle.com       vboxdb  # Added by NetworkManager 10.0.3.102      vboxfmw.oracle.com      vboxfmw # Added by NetworkManager 127.0.0.1       localhost.localdomain   localhost ::1     vboxdb.oracle.com       vboxdb  localhost6.localdomain6 localhost6 To make sure everything takes effect I restarted the server. Reconfiguring the Database on the DB Machine Because we changed the hostname the listener and the EM console no longer start so I need to modify the listener.ora to use the new hostname and I also need to rebuild the EM configuration because it also relies on the hostname. I edited the $ORACLE_HOME/network/admin/listener.ora and changed the listening address to the new hostname:       (ADDRESS = (PROTOCOL = TCP)(HOST = vboxdb.oracle.com)(PORT = 1521)) After changing the listener.ora I was able to start the listener using: lsnrctl start I also had to reconfigure the EM database control.  I first deconfigured it using the command: emca -deconfig dbcontrol db -repos drop This drops the repository and removes any existing registered dbcontrols. I then re-configured it using the following command: emca -config dbcontrol db -repos create This creates the EM repository and then configures and starts dbcontrol. Now my database machine is ready so I can close it down and take a snapshot. Disabling the Database on the FMW Machine I set up the database to start automatically by creating a service called “dbora”.  On the FMW machine I do not need the database running so I can prevent it auto-starting by running the following command: chkconfig –del dbora Note that because I am using a snapshot it is not a waste of disk space to have the DB installed but not used.  As long as I don’t run it, it won’t cost me anything. I can now close the FMW machine down and take a snapshot. Creating a New Domain The FMW machine is now ready to create a new domain.  When creating the domain I can point it at the second machine which is running the database.  I can potentially run these machines on two separate physical machines as long as I have the original virtual machine available to both of the physical machines. Gotchas in Snapshotting VirtualBox does not support the concept of linked machines in a network like some virtualization technologies so when creating a snapshot it is a good idea to shut both VMs down and then take a snapshot on both of them.  This is because we want to keep the database in sync with the middleware.  One way to make sure that this happens would be to place all the domain configuration files on the database server via an NFS share, this would mean that all we would need to snapshot would be the database machine because that would hold all the state and configuration. The Sky’s the Limit We have covered a simple case of having just two machines.  I have a more complicated configuration in which two machine run a RAC database off the same base OS image, and two more machines run a SOA cluster based on the same OS image.  Just remember what machine holds state and what are the consequences of taking a snapshot.

    Read the article

  • What's new in ASP.Net 4.5 and VS 2012 - part 1

    - by nikolaosk
    I have downloaded .Net framework 4.5 and Visual Studio 2012 since it was released to MSDN subscribers on the 15th of August.For people that do not know about that yet please have a look at Jason Zander's excellent blog post .Since then I have been investigating the many new features that have been introduced in this release.In this post I will be looking into new features available in ASP.Net 4.5 and VS 2012.In order to follow along this post you must have Visual Studio 2012 and .Net Framework 4.5 installed in your machine.Download and install VS 2012 using this link.My machine runs on Windows 8 and Visual Studio 2012 works just fine. Please find all my posts regarding VS 2012, here .Well I have not exactly kept my promise for writing short blog posts, so I will try to keep this one short. 1) Launch VS 2012 and create a new Web Forms application by going to File - >New Web Site - > ASP.Net Web Forms Site.2) Choose an appropriate name for your web site.3) Build and run your site (CTRL+F5). Then go to View - > Source to see the HTML markup (Javascript e.t.c) that is rendered through the browser.You will see that the ASP.Net team has done a good job to make the markup cleaner and more readable. The ViewState size is significantly smaller compared to its size to earlier versions.Have a look at the picture below 4) Another thing that you must notice is that the new template makes good use of HTML 5 elements.When you view the application through the browser and then go to View Page Source you will see HTML 5 elements like nav,header,section.Have a look at the picture below  5) In VS 2012 we can browse with multiple browsers. There is a very handy dropdown that shows all the browsers available for viewing the website.Have a look at the picture below When I select the option Browse With... I see another window and I can select any of the installed browsers I want and also set the default browser. Have a look at the picture below  When I click Browse, all the selected browsers fire up and I can view the website in all of them.Have a look at the picture below There will be more posts soon looking into new features of ASP.Net 4.5 and VS 2012Hope it helps!!!

    Read the article

  • SRs @ Oracle: How do I License Thee?

    - by [email protected]
    With the release of the new Sun Ray product last week comes the advent of a different software licensing model. Where Sun had initially taken the approach of '1 desktop device = one license', we later changed things to be '1 concurrent connection to the server software = one license', and while there were ways to tell how many connections there were at a time, it wasn't the easiest thing to do.  And, when should you measure concurrency?  At your busiest time, of course... but when might that be?  9:00 Monday morning this week might yield a different result than 9:00 Monday morning last week.In the acquisition of this desktop virtualization product suite Oracle has changed things to be, in typical Oracle fashion, simpler.  There are now two choices for customers around licensing: Named User licenses and Per Device licenses.Here's how they work, and some examples:The Rules1) A Sun Ray device, and PC running the Desktop Access Client (DAC), are both considered unique devices.OR, 2) Any user running a session on either a Sun Ray or an DAC is still just one user.So, you have a choice of path to go down.Some Examples:Here are 6 use cases I can think of right now that will help you choose the Oracle server software licensing model that is right for your business:Case 1If I have 100 Sun Rays for 100 users, and 20 of them use DAC at home that is 100 user licenses.If I have 100 Sun Rays for 100 users, and 20 of them use DAC at home that is 120 device licenses.Two cases using the same metrics - different licensing models and therefore different results.Case 2If I have 100 Sun Rays for 200 users, and 20 of them use DAC at home that is 200 user licenses.If I have 100 Sun Rays for 200 users, and 20 of them use DAC at home that is 120 device licenses.Same metrics - very different results.Case 3If I have 100 Sun Rays for 50 users, and 20 of them use DAC at home that is 50 user licenses.If I have 100 Sun Rays for 50 users, and 20 of them use DAC at home that is 120 device licenses.Same metrics - but again - very different results.Based on the way your business operates you should be able to see which of the two licensing models is most advantageous to you.Got questions?  I'll try to help.(Thanks to Brad Lackey for the clarifications!)

    Read the article

  • Allen for Umbraco - Upload photos from your iPhone - iPad and iPod Touch

    - by Vizioz Limited
    At last year's UK Umbraco Festival we gave a demo of our alpha version of Allen for Umbraco, at that stage the application only worked on an iPhone and was a very quick prototype to see what people thought.When we returned to our office the next day, we decided if we were going to release Allen for Umbraco into the wild we really should start again from scratch, the main two reasons for this were;First to ensure it was a truly Universal application ( i.e. it can be installed on an iPhone, iPad or iPod ) which looks and behaves differently depending on the device. The second reason was we really wanted the application to be the foundations of more than just image uploading for Umbraco, for this to be the case we ensured the new version was built following proven design patterns and with lots of unit tests so that we can easily extended it.We have lots of plans for future versions of Allen for Umbraco including adding iCloud support to keep all your settings in sync across your multiple Apple devices. We are also working on support for Umbraco 5 which should be release soon.When you download the App and setup your site, make sure you have a look at the Image Resizing settings, by default we have set these to resize your images to 512 pixels wide, however you can choose from a variety of different resizing methods (by Height, Width, Fit within a frame or the full size image).Also, by default when you select a photo you will see that the image is named with it's date and time stamp of when the photograph was taken (or the current date and time if the original date is not stored in your image). If you click on this name you can edit the name of your photo before it is uploaded.Finally, we are really keep to get your feedback, so within the App help section you will find a way to submit Suggestions and if needed, you can send up Support emails from within the App :)We hope you enjoy the first version of Allen for Umbraco and we look forward to bringing you lots of exciting additional functionality in the future!

    Read the article

  • Does it matter to you that a software is "available source" but not "open source"

    - by ccpod
    You probably know the list of open source licenses officially approved by the OSI. Most notably I guess would be the GPL, MIT, [insert your favorite license here]. I recently ran into a project which although was open source (the creator made all source code available), was not officially open source under one of those official licenses. It released the source, but made no promise to release the source in the future. It allowed modification suggestions, but made no promises to accept patches and disallowed external distribution of externally-patched versions. It allowed the use of the software in commercial or paid projects, but disallowed the sale of the software itself. I suppose it could be called "available source" not open source as we like to think of it. I can see why the management team of a company wouldn't want to do business with this software. They can't fork it, they can't sell it, they can't create their own version of the software and distribute it or sell it. But would it matter to you as part of a software engineering team who's just using this software? I can still get my work done with it, I can use it in a project for which I'm paid (but I can't sell the software itself, which I'm not in the business of doing anyway), and I can make changes to the code to make it behave differently for my needs (but I can't make those modifications public), and if I do want those modifications officially made available to others, the approval is up to the project itself and they choose whether to incorporate them in an official release or not. So we know that a company that wants to base its business on this "available source" software can't do that, but as someone from the software engineering team, would those differences matter to you or do they seem less relevant? Curious what others think of this.

    Read the article

  • Learn to Create Applications Using MySQL with MySQL for Developers Course

    - by Antoinette O'Sullivan
    If you are a database developer who wants to create applications using MySQL, then the MySQL for Developers course is for you. This course covers how to plan, design and implement applications using the MySQL database with realistic examples in Java and PHP. To see more details of the content of the MySQL for Developers course, go to http://oracle.com/education/mysql and click on the Learning Paths tab and select the MySQL Developer path. You can take this course as a: Live-Virtual Event: Follow this live instructor-led event from your own desk - no travel required. Choose from a selection of events on the calendar in languages such as English, German and Korean. In-Class Event: Travel to an education center to take this class. Below is a sample of events on the schedule.  Location  Date  Language  Vienna, Austria  4 March 2013  German  London, England  4 March 2013  English  Gummersbach, Germany  11 February 2013  Germany  Hamburg, Germany  14 January 2013  Germany  Munich, Germany  15 April 2013  Germany  Budapest, Hungary  15 April 2013  Hungarian  Milan, Italy  21 January 2013  Italy  Rome, Italy  11 March 2013  Italy  Amsterdam, Netherlands  28 January 2013  Dutch  Nieuwegein, Netherlands  13 May 2013  Dutch  Lisbon, Portugal  18 February 2013  European Portugese  Porto, Portugal  18 February 2013  European Portugese  Barcelona, Spain  18 February 2013  Spanish  Madrid, Spain  28 January 2013  Spanish  Bern, Switzerland  11 April 2013  German  Zurich, Switzerland  11 April 2013  German  Nairobi, Kenya  21 January 2013  English  Petaling Jaya, Malaysia  17 December 2012  English  Sao Paulo, Brazil  11 March 2013  Brazilian Portugese For more information on this class or other courses on the authentic MySQL curriculum, or to express your interest in additional events, go to http://oracle.com/education/mysql. Note, many organizations deploy both Oracle Database and MySQL side by side to serve different needs, and as a database professional you can find training courses on both topics at Oracle University! Check out the upcoming Oracle Database training courses and MySQL training courses. Even if you're only managing Oracle Databases at this point of time, getting familiar with MySQL will broaden your career path with growing job demand.

    Read the article

  • C#: String Concatenation vs Format vs StringBuilder

    - by James Michael Hare
    I was looking through my groups’ C# coding standards the other day and there were a couple of legacy items in there that caught my eye.  They had been passed down from committee to committee so many times that no one even thought to second guess and try them for a long time.  It’s yet another example of how micro-optimizations can often get the best of us and cause us to write code that is not as maintainable as it could be for the sake of squeezing an extra ounce of performance out of our software. So the two standards in question were these, in paraphrase: Prefer StringBuilder or string.Format() to string concatenation. Prefer string.Equals() with case-insensitive option to string.ToUpper().Equals(). Now some of you may already know what my results are going to show, as these items have been compared before on many blogs, but I think it’s always worth repeating and trying these yourself.  So let’s dig in. The first test was a pretty standard one.  When concattenating strings, what is the best choice: StringBuilder, string concattenation, or string.Format()? So before we being I read in a number of iterations from the console and a length of each string to generate.  Then I generate that many random strings of the given length and an array to hold the results.  Why am I so keen to keep the results?  Because I want to be able to snapshot the memory and don’t want garbage collection to collect the strings, hence the array to keep hold of them.  I also didn’t want the random strings to be part of the allocation, so I pre-allocate them and the array up front before the snapshot.  So in the code snippets below: num – Number of iterations. strings – Array of randomly generated strings. results – Array to hold the results of the concatenation tests. timer – A System.Diagnostics.Stopwatch() instance to time code execution. start – Beginning memory size. stop – Ending memory size. after – Memory size after final GC. So first, let’s look at the concatenation loop: 1: // build num strings using concattenation. 2: for (int i = 0; i < num; i++) 3: { 4: results[i] = "This is test #" + i + " with a result of " + strings[i]; 5: } Pretty standard, right?  Next for string.Format(): 1: // build strings using string.Format() 2: for (int i = 0; i < num; i++) 3: { 4: results[i] = string.Format("This is test #{0} with a result of {1}", i, strings[i]); 5: }   Finally, StringBuilder: 1: // build strings using StringBuilder 2: for (int i = 0; i < num; i++) 3: { 4: var builder = new StringBuilder(); 5: builder.Append("This is test #"); 6: builder.Append(i); 7: builder.Append(" with a result of "); 8: builder.Append(strings[i]); 9: results[i] = builder.ToString(); 10: } So I take each of these loops, and time them by using a block like this: 1: // get the total amount of memory used, true tells it to run GC first. 2: start = System.GC.GetTotalMemory(true); 3:  4: // restart the timer 5: timer.Reset(); 6: timer.Start(); 7:  8: // *** code to time and measure goes here. *** 9:  10: // get the current amount of memory, stop the timer, then get memory after GC. 11: stop = System.GC.GetTotalMemory(false); 12: timer.Stop(); 13: other = System.GC.GetTotalMemory(true); So let’s look at what happens when I run each of these blocks through the timer and memory check at 500,000 iterations: 1: Operator + - Time: 547, Memory: 56104540/55595960 - 500000 2: string.Format() - Time: 749, Memory: 57295812/55595960 - 500000 3: StringBuilder - Time: 608, Memory: 55312888/55595960 – 500000   Egad!  string.Format brings up the rear and + triumphs, well, at least in terms of speed.  The concat burns more memory than StringBuilder but less than string.Format().  This shows two main things: StringBuilder is not always the panacea many think it is. The difference between any of the three is miniscule! The second point is extremely important!  You will often here people who will grasp at results and say, “look, operator + is 10% faster than StringBuilder so always use StringBuilder.”  Statements like this are a disservice and often misleading.  For example, if I had a good guess at what the size of the string would be, I could have preallocated my StringBuffer like so:   1: for (int i = 0; i < num; i++) 2: { 3: // pre-declare StringBuilder to have 100 char buffer. 4: var builder = new StringBuilder(100); 5: builder.Append("This is test #"); 6: builder.Append(i); 7: builder.Append(" with a result of "); 8: builder.Append(strings[i]); 9: results[i] = builder.ToString(); 10: }   Now let’s look at the times: 1: Operator + - Time: 551, Memory: 56104412/55595960 - 500000 2: string.Format() - Time: 753, Memory: 57296484/55595960 - 500000 3: StringBuilder - Time: 525, Memory: 59779156/55595960 - 500000   Whoa!  All of the sudden StringBuilder is back on top again!  But notice, it takes more memory now.  This makes perfect sense if you examine the IL behind the scenes.  Whenever you do a string concat (+) in your code, it examines the lengths of the arguments and creates a StringBuilder behind the scenes of the appropriate size for you. But even IF we know the approximate size of our StringBuilder, look how much less readable it is!  That’s why I feel you should always take into account both readability and performance.  After all, consider all these timings are over 500,000 iterations.   That’s at best  0.0004 ms difference per call which is neglidgable at best.  The key is to pick the best tool for the job.  What do I mean?  Consider these awesome words of wisdom: Concatenate (+) is best at concatenating.  StringBuilder is best when you need to building. Format is best at formatting. Totally Earth-shattering, right!  But if you consider it carefully, it actually has a lot of beauty in it’s simplicity.  Remember, there is no magic bullet.  If one of these always beat the others we’d only have one and not three choices. The fact is, the concattenation operator (+) has been optimized for speed and looks the cleanest for joining together a known set of strings in the simplest manner possible. StringBuilder, on the other hand, excels when you need to build a string of inderterminant length.  Use it in those times when you are looping till you hit a stop condition and building a result and it won’t steer you wrong. String.Format seems to be the looser from the stats, but consider which of these is more readable.  Yes, ignore the fact that you could do this with ToString() on a DateTime.  1: // build a date via concatenation 2: var date1 = (month < 10 ? string.Empty : "0") + month + '/' 3: + (day < 10 ? string.Empty : "0") + '/' + year; 4:  5: // build a date via string builder 6: var builder = new StringBuilder(10); 7: if (month < 10) builder.Append('0'); 8: builder.Append(month); 9: builder.Append('/'); 10: if (day < 10) builder.Append('0'); 11: builder.Append(day); 12: builder.Append('/'); 13: builder.Append(year); 14: var date2 = builder.ToString(); 15:  16: // build a date via string.Format 17: var date3 = string.Format("{0:00}/{1:00}/{2:0000}", month, day, year); 18:  So the strength in string.Format is that it makes constructing a formatted string easy to read.  Yes, it’s slower, but look at how much more elegant it is to do zero-padding and anything else string.Format does. So my lesson is, don’t look for the silver bullet!  Choose the best tool.  Micro-optimization almost always bites you in the end because you’re sacrificing readability for performance, which is almost exactly the wrong choice 90% of the time. I love the rules of optimization.  They’ve been stated before in many forms, but here’s how I always remember them: For Beginners: Do not optimize. For Experts: Do not optimize yet. It’s so true.  Most of the time on today’s modern hardware, a micro-second optimization at the sake of readability will net you nothing because it won’t be your bottleneck.  Code for readability, choose the best tool for the job which will usually be the most readable and maintainable as well.  Then, and only then, if you need that extra performance boost after profiling your code and exhausting all other options… then you can start to think about optimizing.

    Read the article

  • Facebook: Hide Your Status Updates From Your Boss/Ex or Any Specific Friend

    - by Gopinath
    Sometime we want to hide our status updates from specific people who are already accepted as Friends in Facebook. Do you wonder why we need to accept someone as friend and then hide status updates from them? Well, may be you have to accept a friend request from your boss, but certainly love to hide status updates as well as other Facebook activities from him. Something similar goes with few annoying friends whom you cant’ de-friend but like to hide your updates. Thanks to Facebook for providing fine grain privacy options on controlling what we want to share and with whom we want to share. It’s very easy to block one or more specific friends from seeing your status updates. Here are the step by step instructions: 1. Login to Facebook and go to Privacy Settings Page. It shows a page something similar to what is shown in the below image. 2. Click on “Customize settings” link 3. Expand the privacy options available in the section Things I Share -> Posts by me. Choose Customise from the list of available options   4. Type the list of unwanted friend’s names in to input box of the section "Hide this from”. Here is a screen grab of couple of my friends whom I added for writing this post 5. Click the Save Settings button. That’s all. Facebook will ensure that these people will not see your status updates on their news feed. Enjoyed the Facebook Tip? Join Tech Dreams on Facebook to read all our blog posts on your Facebook’s news feed. Join us on Facebook to read all our stories right inside your Facebook news feed.

    Read the article

  • [MINI HOW-TO] Create Keyboard Shortcuts to Applications in Windows

    - by Asian Angel
    Do you need just one or a few special keyboard shortcuts for your favorite program(s)? A quick modification to program shortcuts will get you up and running without installing additional software. Creating New Keyboard Shortcuts Go to the start menu shortcut for the program, right-click on it, and select properties. When the properties window opens click in the shortcut key text area. All that you need to do is choose an appropriate letter for the program (i.e. O for Opera, E for Editra, etc.) and type it in the blank. You will not need to type any other keys or combination in…the “Ctrl + Alt +” will be automatically entered for you as soon as you type the letter in. Click OK to finish creating the new keyboard shortcut. Those new keyboard shortcuts will speed up access to your favorite software. Another example from our system using “I” for Iron Browser. Certainly much quicker than using the start menu. Conclusion If you only need one or just a few special keyboard shortcuts then this method provides a quick and simple solution. Similar Articles Productive Geek Tips Show Keyboard Shortcut Access Keys in Windows VistaUse the Windows Key for the "Start" Menu in Ubuntu LinuxCreate Custom Windows Key Keyboard Shortcuts in WindowsHow-To Geek on Lifehacker: Control Your Computer with Shortcuts & Speed Up Vista SetupKeyboard Ninja: 21 Keyboard Shortcut Articles TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010

    Read the article

  • How do I install GRUB on a RAID system installation?

    - by root45
    I'm trying to setup and install Ubuntu on a RAID 1 setup. I have two disks, sdb and sdc. I've been following this guide https://help.ubuntu.com/community/Installation/SoftwareRAID which more or less works for getting everything set up and Ubuntu installed. The problem is at the end of the installation, it tries to install GRUB. By default it tries my "first disk", which gives a "fatal error". I've tried installing it on a specific partion, e.g. sdb1 as well as RAID devices, e.g. md0, md1, etc.. Nothing seems to work. Edit: The actual error is "Unable to install GRUB in /dev/sdb Executing 'grub-install '/dev/sdb' failed. This is a fatal error." Then I'm taken back to the main install menu. If I choose "Install the GRUB boot loader on a hard disk" option, I can pick the partition, but entering sdb2 or md1 gives the same error. So I went ahead an just didn't install GRUB, which means now I presumably have a working Ubuntu installation, but I can't boot it. I've tried booting from the LiveCD to install GRUB, but I can't chroot into my system because it doesn't seem to recognize that my disk is a Linux disk. There's an error about it being a RAID partition. So basically I would really like to know how you know to which device to install GRUB at installation, or at the very least, how to install it on to my system now. I suppose I should also mention that sda is a Windows 7 installation that I would like to keep around and be able to access at boot. Thanks for any help.

    Read the article

  • Oracle University has released “Oracle AIA Foundation Pack 11g: Developing Applications” in the Training on Demand format (TOD)

    - by Lionel Dubreuil
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} In this course, you will learn how to quickly develop integrations using Application Integration Architecture (AIA) Foundation Pack 11g that run on Oracle Fusion Middleware. You’ll learn to: Design and create Application Business Connector Services to integrate applications into AIA Create Enterprise Business Services to perform specific business activities Configure Guaranteed Message Delivery to ensure no loss of messages Extend Enterprise Business Objects and Application Business Connector Services to meet Corporate requirements This course is available now in Training on Demand format. Training On Demand Features are: Delivered by top instructors Video of classroom lecture, whiteboarding, labs Hands-on practice environment Ask your instructor Bonus material from product experts Why Choose On Demand? Start training within 24 hours Get full classroom content online Customize your learning experience Eliminate travel-related expenses Access anytime, anywhere 24/7 You'll find more information here.

    Read the article

  • SonicFileFinder 2.2 Released

    - by WeigeltRo
    My colleague Jens Schaller has released a new version of his free Visual Studio add-in SonicFileFinder, adding support for Visual Studio 2010. Announcement on his blog Download on the SonicFileFinder website As far as I can tell, there are no new features compared to version 2.1, but good to know that this add-in is now available for VS2010. For those who a wondering what SonicFileFinder is about: SonicFileFinder implements a command for searching and opening files in a Visual Studio solution, which is very nice especially in large projects. This may sound familiar to users of JetBrain’s ReSharper, which has a “Go To File” feature. But in my opinion SonicFileFinder does a better job overall: While ReSharper (4.5) does a prefix search by default, SonicFileFinder searches for any occurrence of the entered text inside a file name. In a long list of file names (e.g. all starting with “Page…”), this allows me to focus on the part that makes the difference (e.g. “Render” in PageRenderBuffer.cs). In ReSharper I would have to type “*Render*”, which can be shortened to “*Render” (which isn’t even correct). Note that SonicFileFinder does support wildcards, of course.   SonicFileFinder remembers the last input (and thus the last result list) without a noticeable delay of the popup. If I want to search for something different, I can type right away, so this behavior doesn’t slow me down. But where it really shines is when I’m not even sure what file exactly I was looking for – I open one file, notice that it’s not the one I want, re-open the pop-up dialog and now I can choose another one from the result list without re-entering the search text. SonicFileFinder allows me to open multiple files at one (nice for service interfaces and implementations). SonicFileFinder lets me open either a Windows Explorer or Command Line window in the directory containing a specific file.

    Read the article

  • Visual Studio Shortcut: Surround With

    - by Jeff Widmer
    I learned a new Visual Studio keyboard shortcut today that is really awesome; the “Surround With” shortcut.  You can trigger the Surround With context menu by pressing the Ctrl-K, Ctrl-S key combination when on a line of code. Ctrl-K, Ctrl-S means to hold down the Control key and then press K and then while still holding down the Control key press S. Here is where this comes in handy: You type a line of code and then realize you need to put it within an if statement block. So you type “if” and hit tab twice to insert the if statement code snippet.  Then you highlight the previous line of code that you typed, and then either drag and drop it into the if-then block or cut and paste it.  That is not too bad but it is a lot of extra key clicks and mouse moves. Now try the same with the Surround With keyboard shortcut.  Just highlight that line of code that you just typed and press Ctrl-K, Ctrl-S and choose the if statement code snippet, hit tab, and POW!... you are done!  No more code moving/indenting required. Here is what the Surround With context menu looks like: Just up or down arrow inside the drop down list to the code snippet that you want to surround your currently selected text with.  Did I mention this is AWESOME! Now it is so simple to surround lines of code with an if-then block or a try-catch-finally block... things that usually took several key clicks and maybe one or two mouse moves. And this works in both Visual Studio 2008 and Visual Studio 2010 which means it has been around for a long time and I never knew about it.   Technorati Tags: Visual Studio Keyboard Shortcut

    Read the article

< Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >