existing records - Page 136

Dns - wildcard vs. cname subdomains

- by Matthew

Alright I have to admit I'm confused with how DNS works. I've always just added things until they worked, and now it's time to learn how they work. So one confusing thing to me is that there's sort of two places I can have records. I have an account with rackspace cloud servers. And then there's the place I registered the domain. But both allow me to edit DNS records. Should I do everything at both places or is one better than the other or am I missing the point? Subdomains confuse me too. I'd like to be able to just have a wildcard subdomain (I've done this in the past.) I just don't like the idea of adding a cname record or A record every time I need a new subdomain. Then I read this and it says: The exact rules for when a wild card will match are specified in RFC 1034, but the rules are neither intuitive nor clearly specified. This has resulted in incompatible implementations and unexpected results when they are used.

Read the article

Apache Virtual Hosts behind Cisco Router

- by Theo

I'm setting up an Apache 2.2 Ubuntu web server for internal services that is also supposed to be accessed from outside our LAN. Our LAN has a single external IP that is the external IP of our RV042 Cisco router. We have set up several A records on our external DNS server that point to this IP. Our internal DNS server resolve the same records to the internal IP of our web server, so computers from inside the network can access them using the same address as if they were outside. We forwarded the router's external 80 port to our web server's 80 port. I have set up one Virtual Host for each domain name in our list, and my httpd.conf is something like this: ServerName web.domain.com NameVirtualHost *:80 <VirtualHost *:80> ServerName alfresco.domain.com <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /alfresco http://localhost:8080/alfresco ProxyPassReverse /alfresco http://localhost:8080/alfresco ProxyPass /share http://localhost:8080/share ProxyPassReverse /share http://localhost:8080/share </VirtualHost> <VirtualHost *:80> ServerName crm.domain.com DocumentRoot /var/www/sugarcrm </VirtualHost> Now, this works if we are in our LAN. However, if we are outside of our LAN we reach our web server's default page saying: It Works! This is the default web page for this server. But we can't reach the virtual hosts, as if the domain name is not being preserved when the router forward the packets to the web server. Am I doing something wrong? How can I check what is going on? What should be the settings to make this work from outside?

Read the article

mysqldump --where with = operator doesn't get all rows = - Help!

- by JonathanLIVE

I have a situation with a particular table that now thinks it contains 4 Petabytes of data. I know that sounds cool, but I assure you, it is only on a 60GB partition. This table has 9 fields in it. One of them is a domain_id field. It is the best field to identify the rows by, as there are only approximately 6300 of them. The only other field option to match has over 2million records, and thats just more difficult. I cannot do a straight mysqldump because it will attempt to output all 4PB of data and fill the drive long before it gets close to that, so I need to surgically remove the good stuff, destroy the db, and recreate it. I believe if I can do a dump for each domain_id record, then I will get most of the usable data out of it. This is what I am trying to use: mysqldump -u root --skip-opt -q --no-create-info --skip-add-drop-table --max_allowed_packet=1000000000 database table --where="domain_id=10" domains10.sql Using this I expect every row with the domain_id 10 to be exported. However, when I check the export, I am only getting 1 row, when however I look at the db, there are many many rows. It is as though the operator just finds one, then gives up. I have tried various operators. Using the < or I am able to get more of the data, but the export stops short at certain rows where the data has been compromised. With over 6000 to go through, I can't narrow down which rows are being affected in the export easily enough. So, what I need is an operator that will basically do what I thought = would do, simply give me an export of all records that match the specific field. Also note, the only way I got this DB even accessible is through an innodb force recovery 3. So I need to get this right, because after this is done, I have to drop the db in order to make mysql functional again. Looking forward to any helpful answers.

Read the article

XAMPP server giving 404 error when requested by ipv4 connection

- by boyb

This is in reference to a previous question that I asked and was answered by womble. http://serverfault.com/a/406280/127729 So, now we have the real DNS records, we can do some diagnosis. dig for both A and AAAA on akosiboybastos.broker.freenet6.net gives a valid response, with an appropriate address. Good. dig for both A and AAAA on bastosforum.strangled.net gives the same responses (with a CNAME response thrown in). Also good. This means that the problem is not DNS-related, as those records are in order. wget -6 bastosforum.strangled.net/ gives a 200 OK response. wget -4 bastosforum.strangled.net/ gives a 404 Not Found response. This means that your webserver is misconfigured so that it's not serving the response you desire on IPv4. Given that the initial DNS problem asked in this question has been solved, I would recommend posting a new question with relevant webserver-related configuration, if you can't determine the configuration error yourself. I am using XAMPP(latest version) running phpbb3.0.10 via ipv6 tunnel from freenet6 and my domain is akosiboybastos.broker.freenet6.com, nothing fancy with the installation just out of the box install(with a few cosmetic mod). Both ipv4 and ipv6 traffic can connect using that url, but when I try to put a CNAME record on my test domain which is bastosforum.strangled.net pointing it to akosiboybastos.broker.freenet6.com only ipv6 can connect. As suggested by womble, this is a misconfigured webserver. To be honest I don't know where to start checking on the server as it is fully working if you use the domain given by freenet6 (akosiboybastos.broker.freenet6.com), any info on how to go about this server issue is welcome as i'm really a noob when it comes to computers. regards boyb

Read the article

Issues with returned mail sent to web-based email domains

- by Beeder

My company is having issues with returned mail that we send out to external domains. A few weeks ago we replaced a firewall and changed ISP providers and began subsequently having issues RECEIVING emails from external sources because we hadn't updated our new IPs in the DNS records. After making the necessary configuration changes and setting up SMTP forwarding over port 25 to our mail server, everything was working fine up until a few days ago when we started having mail sent out returned to us. We aren't having any trouble communicating internally (to recipients on our domain) but it seems we're having trouble with outbound messages to web-based email recipients. (@hotmail, @live, @yahoo, @gmail...etc) Currently we are running Server 2003 SP2 and exchange 2003. I'm very unfamiliar with configuring Exchange and could really use some help in narrowing down the possibilities. I did some research and am becoming suspicious of Sender ID being the culprit due to our recent IP address change and the likelihood that Sender ID is identifying us as a fake domain. Am I going in entirely the wrong direction? Any input or guidance would be infinitely appreciated. This is the message that is returned when an outbound message fails...this particular one was sent to my @live.com account for testing purposes... Your message did not reach some or all of the intended recipients. The following recipient(s) could not be reached: [email protected] on 5/17/2012 3:02 PM There was a SMTP communication problem with the recipient's email server. Please contact your system administrator. Unfortunately, messages from xx.x.xx.x weren't sent. Please contact your Internet service provider since part of their network is on our block list. I tried a reverse DNS lookup and found that we are set up as a Forward-confirmed reverse DNS. So do I just need to contact my ISP and have them correct their DNS records or is this something I can solve on our end??

Read the article

5 year old server upgrade

- by rizzo0917

I am looking to upgrade a server for a web app. Currently the application is running very sluggish. We've made some adjustments to mysql (that's another issue in itself) and made some adjustments so that heaviest quires get run on a copy of the database on another server was have as a backup, however this will not last that much longer and we are looking to upgrade. Currently the servers CPUs are (4) Intel(R) XEON(TM) CPU 2.00GHz, with 1 gig of ram. The database is 442.5 MiB, with about 1,743,808 records. There are two parts of the program, the one, side a, inserts and updates most of the data. Side b, reads the data and does some minor updates. Currently our biggest day for side a are 800 users (of 40,000 users all year) imputing the system. And our Side b is currently unknown, however we have a total of 1000 clients. The system is most likely going to cap out at 5000 side b clients, with about a year 300,000 side a users. The current database is 5 years old, so we can most likely expect the database to grow pretty rapidly, possibly double each year (which we can most likely archive older records if it comes to that). So with that being said, should we get a server for each side of the app, side a being the master, side b being the slave, any updates made on side b are router to side a. So the question is should i get 2 of these or 1. 2 x Intel Nehalem Xeon E5520 2.26Ghz (8 Cores) 12GB DDRIII Memory 500GB SATAII HDD 100Mbps Port Speed And Naturally I would need to have a redundant backup so it could potentially be 4 of them.

Read the article

Mysql InnoDB and quickly applying large updates

- by Tim

Basically my problem is that I have a large table of about 17,000,000 products that I need to apply a bunch of updates to really quickly. The table has 30 columns with the id set as int(10) AUTO_INCREMENT. I have another table which all of the updates for this table are stored in, these updates have to be pre-calculated as they take a couple of days to calculate. This table is in the format of [ product_id int(10), update_value int(10) ]. The strategy I'm taking to issue these 17 million updates quickly is to load all of these updates into memory in a ruby script and group them in a hash of arrays so that each update_value is a key and each array is a list of sorted product_id's. { 150: => [1,2,3,4,5,6], 160: => [7,8,9,10] } Updates are then issued in the format of UPDATE product SET update_value = 150 WHERE product_id IN (1,2,3,4,5,6); UPDATE product SET update_value = 160 WHERE product_id IN (7,8,9,10); I'm pretty sure I'm doing this correctly in the sense that issuing the updates on sorted batches of product_id's should be the optimal way to do it with mysql / innodb. I'm hitting a weird issue though where when I was testing with updating ~13 million records, this only took around 45 minutes. Now I'm testing with more data, ~17 million records and the updates are taking closer to 120 minutes. I would have expected some sort of speed decrease here but not to the degree that I'm seeing. Any advice on how I can speed this up or what could be slowing me down with this larger record set? As far as server specs go they're pretty good, heaps of memory / cpu, the whole DB should fit into memory with plenty of room to grow.

Read the article

Beginning Java (Working with Arrays; Class Assignment)

- by Jason

I am to the point where I feel as if I correctly wrote the code for this homework assignment. We were given a skeleton and 2 classes that we had to import (FileIOHelper and Student). /* * Created: *** put the date here *** * * Author: *** put your name here *** * * The program will read information about students and their * scores from a file, and output the name of each student with * all his/her scores and the total score, plus the average score * of the class, and the name and total score of the students with * the highest and lowest total score. */ // import java.util.Scanner; import java.io.*; // C:\Users\Adam\info.txt public class Lab6 { public static void main(String[] args) throws IOException { // Fill in the body according to the following comments Scanner key boardFile = new Scanner(System.in); // Input file name String filename = getFileName(keyboardFile); //Open the file // Input number of students int numStudents = FileIOHelper.getNumberOfStudents(filename); Student students[] = new Student[numStudents]; // Input all student records and create Student array and // integer array for total scores int totalScore[] = new int[students.length]; for (int i = 0; i < students.length; i++){ for(int j = 1; j < 4; j++){ totalScore[i] = totalScore[i] + students[i].getScore(j); } } // Compute total scores and find students with lowest and // highest total score int maxScore = 0; int minScore = 0; for(int i = 0; i < students.length; i++){ if(totalScore[i] >= totalScore[maxScore]){ maxScore = i; } else if(totalScore[i] <= totalScore[minScore]){ minScore = i; } } // Compute average total score int allScores = 0; int average = 0; for (int i = 0; i < totalScore.length; i++){ allScores = allScores + totalScore[i]; } average = allScores / totalScore.length; // Output results outputResults(students, totalScore, maxScore, minScore, average); } // Given a Scanner in, this method prompts the user to enter // a file name, inputs it, and returns it. private static String getFileName(Scanner in) { // Fill in the body System.out.print("Enter the name of a file: "); String filename = in.next(); return filename; // Do not declare the Scanner variable in this method. // You must use the value this method receives in the // argument (in). } // Given the number of students records n to input, this // method creates an array of Student of the appropriate size, // reads n student records using the FileIOHelper, and stores // them in the array, and finally returns the Student array. private static Student[] getStudents(int n) { Student[] myStudents = new Student[n]; for(int i = 0; i <= n; i++){ myStudents[i] = FileIOHelper.getNextStudent(); } return myStudents; } // Given an array of Student records, an array with the total scores, // the indices in the arrays of the students with the highest and // lowest total scores, and the average total score for the class, // this method outputs a table of all the students appropriately // formatted, plus the total number of students, the average score // of the class, and the name and total score of the students with // the highest and lowest total score. private static void outputResults( Student[] students, int[] totalScores, int maxIndex, int minIndex, int average ) { // Fill in the body System.out.println("\nName \t\tScore1 \tScore2 \tScore3 \tTotal"); System.out.println("--------------------------------------------------------"); for(int i = 0; i < students.length; i++){ outputStudent(students[i], totalScores[i], average); System.out.println(); } System.out.println("--------------------------------------------------------"); outputNumberOfStudents(students.length); outputAverage(average); outputMaxStudent(students[maxIndex], totalScores[maxIndex]); outputMinStudent(students[minIndex], totalScores[minIndex]); System.out.println("--------------------------------------------------------"); } // Given a Student record, the total score for the student, // and the average total score for all the students, this method // outputs one line in the result table appropriately formatted. private static void outputStudent(Student s, int total, int avg) { System.out.print(s.getName() + "\t"); for(int i = 1; i < 4; i++){ System.out.print(s.getScore(i) + "\t"); } System.out.print(total + "\t"); if(total < avg){ System.out.print("-"); }else if(total > avg){ System.out.print("+"); }else{ System.out.print("="); } } // Given the number of students, this method outputs a message // stating what the total number of students in the class is. private static void outputNumberOfStudents(int n) { System.out.println("The total number of students in this class is: \t" + n); } // Given the average total score of all students, this method // outputs a message stating what the average total score of // the class is. private static void outputAverage(int average) { System.out.println("The average total score of the class is: \t" + average); } // Given the Student with highest total score and the student's // total score, this method outputs a message stating the name // of the student and the highest score. private static void outputMaxStudent( Student student, int score ) { System.out.println(student.getName() + " got the maximum total score of: \t" + score); } // Given the Student with lowest total score and the student's // total score, this method outputs a message stating the name // of the student and the lowest score. private static void outputMinStudent( Student student, int score ) { System.out.println(student.getName() + " got the minimum total score of: \t" + score); } } But now I get an error at the line totalScore[i] = totalScore[i] + students[i].getScore(j); Exception in thread "main" java.lang.NullPointerException at Lab6.main(Lab6.java:42)

Read the article

Python regex to parse text file, get the items in list and count the list

- by Nemo

I have a text file which contains some data. I m particularly interested in finding the count of the number of items in v_dims v_dims pattern in my text file looks like this : v_dims={ "Sales", "Product Family", "Sales Organization", "Region", "Sales Area", "Sales office", "Sales Division", "Sales Person", "Sales Channel", "Sales Order Type", "Sales Number", "Sales Person", "Sales Quantity", "Sales Amount" } So I m thinking of getting all the elements in v_dims and dumping them out in a Python list. Then compute the len(mylist) to get the count of the items. The challenge is in getting all the elements of v_dims from my text file and putting them in an empty list. I m particularly interested in items in v_dims in my text file. The text file has data in the form of v_dims pattern i showed in my original post. Some data has nested patterns of v_dims. Thanks. Here's what I have tried and failed. Any help is appreciated. TIA. import re fname = "C:\Users\XXXX\Test.mrk" with open(fname, "r") as fo: content_as_string = fo.read() match = re.findall(r'v_dims={\"(.+?)\"}',content_as_string) Though I have a big text file, Here's a snippet of what's the structure of my text file version "1"; // Computer generated object language file object 'MRKR' "Main" { Data_Type=2, HeaderBlock={ Version_String="6.3 (25)" }, Printer_Info={ Orientation=0, Page_Width=8.50000000, Page_Height=11.00000000, Page_Header="", Page_Footer="", Margin_type=0, Top_Margin=0.50000000, Left_Margin=0.50000000, Bottom_Margin=0.50000000, Right_Margin=0.50000000 }, Marker_Options={ Close_All="TRUE", Hide_Console="FALSE", Console_Left="FALSE", Console_Width=217, Main_Style="Maximized", MDI_Rect={ 0, 0, 892, 1063 } }, Dives={ { Dive="A", Windows={ { View_Index=0, Window_Info={ Window_Rect={ 0, -288, 400, 1008 }, Window_Style="Maximized Front", Window_Name="Theater [Previous Qtr Diveplan-Dive A]" }, Dependent_bool="FALSE", Colset={ Dive_Type="Normal", Dimension_Name="Theater", Action_List={ Actions={ { Action_Type="Select", select_type=5 }, { Action_Type="Select", select_type=0, Key_Names={ "Theater" }, Key_Indexes={ { "AMERICAS" } } }, { Action_Type="Focus", Focus_Rows="True" }, { Action_Type="Dimensions", v_dims={ "Theater", "Product Family", "Division", "Region", "Install at Country Name", "Connect Home Type", "Connect In Type", "SymmConnect Enabled", "Connect Home Refusal Reason", "Sales Order Channel Type", "Maintained By Group", "PS Flag", "Avalanche Flag", "Product Item Family" }, Xtab_Bool="False", Xtab_Flip="False" }, { Action_Type="Select", select_type=5 }, { Action_Type="Select", select_type=0, Key_Names={ "Theater", "Product Family", "Division", "Region", "Install at Country Name", "Connect Home Type", "Connect In Type", "SymmConnect Enabled", "Connect Home Refusal Reason", "Sales Order Channel Type", "Maintained By Group", "PS Flag", "Avalanche Flag" }, Key_Indexes={ { "AMERICAS", "ATMOS", "Latin America CS Division", "37000 CS Region", "Mexico", "", "", "", "", "DIRECT", "EMC", "N", "0" } } } } }, Num_Palette_cols=0, Num_Palette_rows=0 }, Format={ Window_Type="Tabular", Tabular={ Num_row_labels=8 } } } } } }, Widget_Set={ Widget_Layout="Vertical", Go_Button=1, Picklist_Width=0, Sort_Subset_Dimensions="TRUE", Order={ } }, Views={ { Data_Type=1, dbname="Previous Qtr Diveplan", diveline_dbname="Current Qtr Diveplan", logical_name="Current Qtr Diveplan", cols={ { name="Total TSS installs", column_type="Calc[Total TSS installs]", output_type="Number", format_string="." }, { name="TSS Valid Connectivity Records", column_type="Calc[TSS Valid Connectivity Records]", output_type="Number", format_string="." }, { name="% TSS Connectivity Record", column_type="Calc[% TSS Connectivity Record]", output_type="Number" }, { name="TSS Not Applicable", column_type="Calc[TSS Not Applicable]", output_type="Number", format_string="." }, { name="TSS Customer Refusals", column_type="Calc[TSS Customer Refusals]", output_type="Number", format_string="." }, { name="% TSS Refusals", column_type="Calc[% TSS Refusals]", output_type="Number" }, { name="TSS Eligible for Physical Connectivity", column_type="Calc[TSS Eligible for Physical Connectivity]", output_type="Number", format_string="." }, { name="TSS Boxes with Physical Connectivty", column_type="Calc[TSS Boxes with Physical Connectivty]", output_type="Number", format_string="." }, { name="% TSS Physical Connectivity", column_type="Calc[% TSS Physical Connectivity]", output_type="Number" } }, dim_cols={ { name="Model", column_type="Dimension[Model]", output_type="None" }, { name="Model", column_type="Dimension[Model]", output_type="None" }, { name="Connect In Type", column_type="Dimension[Connect In Type]", output_type="None" }, { name="Connect Home Type", column_type="Dimension[Connect Home Type]", output_type="None" }, { name="SymmConnect Enabled", column_type="Dimension[SymmConnect Enabled]", output_type="None" }, { name="Theater", column_type="Dimension[Theater]", output_type="None" }, { name="Division", column_type="Dimension[Division]", output_type="None" }, { name="Region", column_type="Dimension[Region]", output_type="None" }, { name="Sales Order Number", column_type="Dimension[Sales Order Number]", output_type="None" }, { name="Product Item Family", column_type="Dimension[Product Item Family]", output_type="None" }, { name="Item Serial Number", column_type="Dimension[Item Serial Number]", output_type="None" }, { name="Sales Order Deal Number", column_type="Dimension[Sales Order Deal Number]", output_type="None" }, { name="Item Install Date", column_type="Dimension[Item Install Date]", output_type="None" }, { name="SYR Last Dial Home Date", column_type="Dimension[SYR Last Dial Home Date]", output_type="None" }, { name="Maintained By Group", column_type="Dimension[Maintained By Group]", output_type="None" }, { name="PS Flag", column_type="Dimension[PS Flag]", output_type="None" }, { name="Connect Home Refusal Reason", column_type="Dimension[Connect Home Refusal Reason]", output_type="None", col_width=177 }, { name="Cust Name", column_type="Dimension[Cust Name]", output_type="None" }, { name="Sales Order Channel Type", column_type="Dimension[Sales Order Channel Type]", output_type="None" }, { name="Sales Order Type", column_type="Dimension[Sales Order Type]", output_type="None" }, { name="Part Model Key", column_type="Dimension[Part Model Key]", output_type="None" }, { name="Ship Date", column_type="Dimension[Ship Date]", output_type="None" }, { name="Model Number", column_type="Dimension[Model Number]", output_type="None" }, { name="Item Description", column_type="Dimension[Item Description]", output_type="None" }, { name="Customer Classification", column_type="Dimension[Customer Classification]", output_type="None" }, { name="CS Customer Name", column_type="Dimension[CS Customer Name]", output_type="None" }, { name="Install At Customer Number", column_type="Dimension[Install At Customer Number]", output_type="None" }, { name="Install at Country Name", column_type="Dimension[Install at Country Name]", output_type="None" }, { name="TLA Serial Number", column_type="Dimension[TLA Serial Number]", output_type="None" }, { name="Product Version", column_type="Dimension[Product Version]", output_type="None" }, { name="Avalanche Flag", column_type="Dimension[Avalanche Flag]", output_type="None" }, { name="Product Family", column_type="Dimension[Product Family]", output_type="None" }, { name="Project Number", column_type="Dimension[Project Number]", output_type="None" }, { name="PROJECT_STATUS", column_type="Dimension[PROJECT_STATUS]", output_type="None" } }, Available_Columns={ "Total TSS installs", "TSS Valid Connectivity Records", "% TSS Connectivity Record", "TSS Not Applicable", "TSS Customer Refusals", "% TSS Refusals", "TSS Eligible for Physical Connectivity", "TSS Boxes with Physical Connectivty", "% TSS Physical Connectivity", "Total Installs", "All Boxes with Valid Connectivty Record", "% All Connectivity Record", "Overall Refusals", "Overall Refusals %", "All Eligible for Physical Connectivty", "Boxes with Physical Connectivity", "% All with Physical Conectivity" }, Remaining_columns={ { name="Total Installs", column_type="Calc[Total Installs]", output_type="Number", format_string="." }, { name="All Boxes with Valid Connectivty Record", column_type="Calc[All Boxes with Valid Connectivty Record]", output_type="Number", format_string="." }, { name="% All Connectivity Record", column_type="Calc[% All Connectivity Record]", output_type="Number" }, { name="Overall Refusals", column_type="Calc[Overall Refusals]", output_type="Number", format_string="." }, { name="Overall Refusals %", column_type="Calc[Overall Refusals %]", output_type="Number" }, { name="All Eligible for Physical Connectivty", column_type="Calc[All Eligible for Physical Connectivty]", output_type="Number" }, { name="Boxes with Physical Connectivity", column_type="Calc[Boxes with Physical Connectivity]", output_type="Number" }, { name="% All with Physical Conectivity", column_type="Calc[% All with Physical Conectivity]", output_type="Number" } }, calcs={ { name="Total TSS installs", definition="Total[Total TSS installs]", ts_flag="Not TS Calc" }, { name="TSS Valid Connectivity Records", definition="Total[PS Boxes w/ valid connectivity record (1=yes)]", ts_flag="Not TS Calc" }, { name="% TSS Connectivity Record", definition="Total[PS Boxes w/ valid connectivity record (1=yes)] /Total[Total TSS installs]", ts_flag="Not TS Calc" }, { name="TSS Not Applicable", definition="Total[Bozes w/ valid connectivity record (1=yes)]-Total[Boxes Eligible (1=yes)]-Total[TSS Refusals]", ts_flag="Not TS Calc" }, { name="TSS Customer Refusals", definition="Total[TSS Refusals]", ts_flag="Not TS Calc" }, { name="% TSS Refusals", definition="Total[TSS Refusals]/Total[PS Boxes w/ valid connectivity record (1=yes)]", ts_flag="Not TS Calc" }, { name="TSS Eligible for Physical Connectivity", definition="Total[TSS Eligible]-Total[Exception]", ts_flag="Not TS Calc" }, { name="TSS Boxes with Physical Connectivty", definition="Total[PS Physical Connectivity] - Total[PS Physical Connectivity, SymmConnect Enabled=\"Capable not enabled\"]", ts_flag="Not TS Calc" }, { name="% TSS Physical Connectivity", definition="Total[Boxes w/ phys conn]/Total[Boxes Eligible (1=yes)]", ts_flag="Not TS Calc" }, { name="Total Installs", definition="Total[Total Installs]", ts_flag="Not TS Calc" }, { name="All Boxes with Valid Connectivty Record", definition="Total[Bozes w/ valid connectivity record (1=yes)]", ts_flag="Not TS Calc" }, { name="% All Connectivity Record", definition="Total[Bozes w/ valid connectivity record (1=yes)]/Total[Total Installs]", ts_flag="Not TS Calc" }, { name="Overall Refusals", definition="Total[Overall Refusals]", ts_flag="Not TS Calc" }, { name="Overall Refusals %", definition="Total[Overall Refusals]/Total[Bozes w/ valid connectivity record (1=yes)]", ts_flag="Not TS Calc" }, { name="All Eligible for Physical Connectivty", definition="Total[Boxes Eligible (1=yes)]-Total[Exception]", ts_flag="Not TS Calc" }, { name="Boxes with Physical Connectivity", definition="Total[Boxes w/ phys conn]-Total[Boxes w/ phys conn,SymmConnect Enabled=\"Capable not enabled\"]", ts_flag="Not TS Calc" }, { name="% All with Physical Conectivity", definition="Total[Boxes w/ phys conn]/Total[Boxes Eligible (1=yes)]", ts_flag="Not TS Calc" } }, merge_type="consolidate", merge_dbs={ { dbname="connectivityallproducts.mdl", diveline_dbname="/DI_PSREPORTING/connectivityallproducts.mdl" } }, skip_constant_columns="FALSE", categories={ { name="Geography", dimensions={ "Theater", "Division", "Region", "Install at Country Name" } }, { name="Mappings and Flags", dimensions={ "Connect Home Type", "Connect In Type", "SymmConnect Enabled", "Connect Home Refusal Reason", "Sales Order Channel Type", "Maintained By Group", "Customer Installable", "PS Flag", "Top Level Flag", "Avalanche Flag" } }, { name="Product Information", dimensions={ "Product Family", "Product Item Family", "Product Version", "Item Description" } }, { name="Sales Order Info", dimensions={ "Sales Order Deal Number", "Sales Order Number", "Sales Order Type" } }, { name="Dates", dimensions={ "Item Install Date", "Ship Date", "SYR Last Dial Home Date" } }, { name="Details", dimensions={ "Item Serial Number", "TLA Serial Number", "Part Model Key", "Model Number" } }, { name="Customer Infor", dimensions={ "CS Customer Name", "Install At Customer Number", "Customer Classification", "Cust Name" } }, { name="Other Dimensions", dimensions={ "Model" } } }, Maintain_Category_Order="FALSE", popup_info="false" } } };

Read the article

Can this Query be corrected or different table structure needed? (database dumps provided)

- by sandeepan

This is a bit lengthy but I have provided sufficient details and kept things very clear. Please see if you can help. (I will surely accept answer if it solves my problem) I am sure a person experienced with this can surely help or suggest me to decide the tables structure. About the system:- There are tutors who create classes A tags based search approach is being followed Tag relations are created/edited when new tutors registers/edits profile data and when tutors create classes (this makes tutors and classes searcheable).For simplicity, let us consider only tutor name and class name are the fields which are matched against search keywords. In this example, I am considering - tutor "Sandeepan Nath" has created a class called "first class" tutor "Bob Cratchit" has created a class called "new class" Desired search results- AND logic to be appied on the search keywords and match against class and tutor data(class name + tutor name), in other words, All those classes be shown such that all the search terms are present in the class name or its tutor name. Example to be clear - Searching "first class" returns class with id_wc = 1. Working Searching "Sandeepan class" should also return class with id_wc = 1. Not working in System 2. Problem with profile editing and searching To tell in one sentence, I am facing a conflict between the ease of profile edition (edition of tag relations when tutor profiles are edited) and the ease of search logic. In the beginning, we had one table structure and search was easy but tag edition logic was very clumsy and unmaintainable(Check System 1 in the section below) . So we created separate tag relations tables to make profile edition simpler but search has become difficult. Please dump the tables so that you can run the search query I have given below and see the results. System 1 (previous system - search easy - profile edition difficult):- Only one table called All_Tag_Relations table had the all the tag relations. The tags table below is common to both systems 1 and 2. CREATE TABLE IF NOT EXISTS `all_tag_relations` ( `id_tag_rel` int(10) NOT NULL AUTO_INCREMENT, `id_tag` int(10) unsigned NOT NULL DEFAULT '0', `id_tutor` int(10) DEFAULT NULL, `id_wc` int(10) unsigned DEFAULT NULL, PRIMARY KEY (`id_tag_rel`), KEY `All_Tag_Relations_FKIndex1` (`id_tag`), KEY `id_wc` (`id_wc`), KEY `id_tag` (`id_tag`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1; INSERT INTO `all_tag_relations` (`id_tag_rel`, `id_tag`, `id_tutor`, `id_wc`) VALUES (1, 1, 1, NULL), (2, 2, 1, NULL), (3, 1, 1, 1), (4, 2, 1, 1), (5, 3, 1, 1), (6, 4, 1, 1), (7, 6, 2, NULL), (8, 7, 2, NULL), (9, 6, 2, 2), (10, 7, 2, 2), (11, 5, 2, 2), (12, 4, 2, 2); CREATE TABLE IF NOT EXISTS `tags` ( `id_tag` int(10) unsigned NOT NULL AUTO_INCREMENT, `tag` varchar(255) DEFAULT NULL, PRIMARY KEY (`id_tag`), UNIQUE KEY `tag` (`tag`), KEY `id_tag` (`id_tag`), KEY `tag_2` (`tag`), KEY `tag_3` (`tag`), KEY `tag_4` (`tag`), FULLTEXT KEY `tag_5` (`tag`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=8 ; INSERT INTO `tags` (`id_tag`, `tag`) VALUES (1, 'Sandeepan'), (2, 'Nath'), (3, 'first'), (4, 'class'), (5, 'new'), (6, 'Bob'), (7, 'Cratchit'); Please note that for every class, the tag rels of its tutor have to be duplicated. Example, for class with id_wc=1, the tag rel records with id_tag_rel = 3 and 4 are actually extras if you compare with the tag rel records with id_tag_rel = 1 and 2. System 2 (present system - profile edition easy, search difficult) Two separate tables Tutors_Tag_Relations and Webclasses_Tag_Relations have the corresponding tag relations data (Please dump into a separate database)- CREATE TABLE IF NOT EXISTS `tutors_tag_relations` ( `id_tag_rel` int(10) NOT NULL AUTO_INCREMENT, `id_tag` int(10) unsigned NOT NULL DEFAULT '0', `id_tutor` int(10) DEFAULT NULL, PRIMARY KEY (`id_tag_rel`), KEY `All_Tag_Relations_FKIndex1` (`id_tag`), KEY `id_tag` (`id_tag`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1; INSERT INTO `tutors_tag_relations` (`id_tag_rel`, `id_tag`, `id_tutor`) VALUES (1, 1, 1), (2, 2, 1), (3, 6, 2), (4, 7, 2); CREATE TABLE IF NOT EXISTS `webclasses_tag_relations` ( `id_tag_rel` int(10) NOT NULL AUTO_INCREMENT, `id_tag` int(10) unsigned NOT NULL DEFAULT '0', `id_tutor` int(10) DEFAULT NULL, `id_wc` int(10) DEFAULT NULL, PRIMARY KEY (`id_tag_rel`), KEY `webclasses_Tag_Relations_FKIndex1` (`id_tag`), KEY `id_wc` (`id_wc`), KEY `id_tag` (`id_tag`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1; INSERT INTO `webclasses_tag_relations` (`id_tag_rel`, `id_tag`, `id_tutor`, `id_wc`) VALUES (1, 3, 1, 1), (2, 4, 1, 1), (3, 5, 2, 2), (4, 4, 2, 2); CREATE TABLE IF NOT EXISTS `tags` ( `id_tag` int(10) unsigned NOT NULL AUTO_INCREMENT, `tag` varchar(255) DEFAULT NULL, PRIMARY KEY (`id_tag`), UNIQUE KEY `tag` (`tag`), KEY `id_tag` (`id_tag`), KEY `tag_2` (`tag`), KEY `tag_3` (`tag`), KEY `tag_4` (`tag`), FULLTEXT KEY `tag_5` (`tag`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=8 ; INSERT INTO `tags` (`id_tag`, `tag`) VALUES (1, 'Sandeepan'), (2, 'Nath'), (3, 'first'), (4, 'class'), (5, 'new'), (6, 'Bob'), (7, 'Cratchit'); CREATE TABLE IF NOT EXISTS `all_tag_relations` ( `id_tag_rel` int(10) NOT NULL AUTO_INCREMENT, `id_tag` int(10) unsigned NOT NULL DEFAULT '0', `id_tutor` int(10) DEFAULT NULL, `id_wc` int(10) unsigned DEFAULT NULL, PRIMARY KEY (`id_tag_rel`), KEY `All_Tag_Relations_FKIndex1` (`id_tag`), KEY `id_wc` (`id_wc`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1; insert into All_Tag_Relations select NULL,id_tag,id_tutor,NULL from Tutors_Tag_Relations; insert into All_Tag_Relations select NULL,id_tag,id_tutor,id_wc from Webclasses_Tag_Relations; Here you can see how easily tutor first name can be edited only in one place. But search has become really difficult, so on being advised to use a Temporary table, I am creating one at every search request, then dumping all the necessary data and then searching from it, I am creating this All_Tag_Relations table at search run time. Here I am just dumping all the data from the two tables Tutors_Tag_Relations and Webclasses_Tag_Relations. But, I am still not able to get classes if I search with tutor name This is the query which searches "first class". Running them on both the systems shows correct results (returns the class with id_wc = 1). SELECT wtagrels.id_wc,SUM(DISTINCT( wtagrels.id_tag =3)) AS key_1_total_matches, SUM(DISTINCT( wtagrels.id_tag =4)) AS key_2_total_matches FROM all_tag_relations AS wtagrels WHERE ( wtagrels.id_tag =3 OR wtagrels.id_tag =4 ) GROUP BY wtagrels.id_wc HAVING key_1_total_matches = 1 AND key_2_total_matches = 1 LIMIT 0, 20 But, searching for "Sandeepan class" works only with the 1st system Here is the query which searches "Sandeepan class" SELECT wtagrels.id_wc,SUM(DISTINCT( wtagrels.id_tag =1)) AS key_1_total_matches, SUM(DISTINCT( wtagrels.id_tag =4)) AS key_2_total_matches FROM all_tag_relations AS wtagrels WHERE ( wtagrels.id_tag =1 OR wtagrels.id_tag =4 ) GROUP BY wtagrels.id_wc HAVING key_1_total_matches = 1 AND key_2_total_matches = 1 LIMIT 0, 20 Can anybody alter this query and somehow do a proper join or something to get correct results. That solves my problem in a nice way. As you can figure out, the reason why it does not work in system 2 is that in system 1, for every class, one additional tag relation linking class and tutor name is present. e.g. for class first class, (records with id_tag_rel 3 and 4) which returns the class on searching with tutor name. So, you see the trade-off between the search and profile edition difficulty with the two systems. How do I overcome both. I have to reach a conclusion soon. So far my reasoning is it is definitely not good from a code maintainability point of view to follow the single tag rel table structure of system one, because in a real system while editing a field like "tutor qualifications", there can be as many records in tag rels table as there are words in qualification of a tutor (one word in a field = one tag relation). Now suppose a tutor has 100 classes. When he edits his qualification, all the tag rel rows corresponding to him are deleted and then as many copies are to be created (as per the new qualification data) as there are classes. This becomes particularly difficult if later more searcheable fields are added. The code cannot be robust. Is the best solution to follow system 2 (edition has to be in one table - no extra work for each and every class) and somehow re-create the all_tag_relations table like system 1 (from the tables tutor_tag_relations and webclasses_tag_relations), creating the extra tutor tag rels for each and every class by a tutor (which is currently missing in system 2's temporary all_tag_relations table). That would be a time consuming logic script. I doubt that table can be recreated without resorting to PHP sript (mysql alone cannot do that). But the problem is that running all this at search time will make search definitely slow. So, how do such systems work? How are such situations handled? I thought about we can run a cron which initiates that PHP script, say every 1 minute and replaces the existing all_tag_relations table as per new tag rels from tutor_tag_relations and webclasses_tag_relations (replaces means creates a new table, deletes the original and renames the new one as all_tag_relations, otherwise search won't work during that period- or is there any better way to that?). Anyway, the result would be that any changes by tutors will reflect in search in the next 1 minute and not immediately. An alternateve would be to initate that PHP script every time a tutor edits his profile. But here again, since many users may edit their profiles concurrently, will the creation of so many tables be a burden and can mysql make the server slow? Any help would be appreciated and working solution will be accepted as answer. Thanks, Sandeepan

Read the article

Can this Query can be corrected or different table structure needed? (question is clear, detailed, d

- by sandeepan

This is a bit lengthy but I have provided sufficient details and kept things very clear. Please see if you can help. (I will surely accept answer if it solves my problem) I am sure a person experienced with this can surely help or suggest me to decide the tables structure. About the system:- There are tutors who create classes A tags based search approach is being followed Tag relations are created/edited when new tutors registers/edits profile data and when tutors create classes (this makes tutors and classes searcheable).For simplicity, let us consider only tutor name and class name are the fields which are matched against search keywords. In this example, I am considering - tutor "Sandeepan Nath" has created a class called "first class" tutor "Bob Cratchit" has created a class called "new class" Desired search results- AND logic to be appied on the search keywords and match against class and tutor data(class name + tutor name), in other words, All those classes be shown such that all the search terms are present in the class name or its tutor name. Example to be clear - Searching "first class" returns class with id_wc = 1. Working Searching "Sandeepan class" should also return class with id_wc = 1. Not working in System 2. Problem with profile editing and searching To tell in one sentence, I am facing a conflict between the ease of profile edition (edition of tag relations when tutor profiles are edited) and the ease of search logic. In the beginning, we had one table structure and search was easy but tag edition logic was very clumsy and unmaintainable(Check System 1 in the section below) . So we created separate tag relations tables to make profile edition simpler but search has become difficult. Please dump the tables so that you can run the search query I have given below and see the results. System 1 (previous system - search easy - profile edition difficult):- Only one table called All_Tag_Relations table had the all the tag relations. The tags table below is common to both systems 1 and 2. CREATE TABLE IF NOT EXISTS `all_tag_relations` ( `id_tag_rel` int(10) NOT NULL AUTO_INCREMENT, `id_tag` int(10) unsigned NOT NULL DEFAULT '0', `id_tutor` int(10) DEFAULT NULL, `id_wc` int(10) unsigned DEFAULT NULL, PRIMARY KEY (`id_tag_rel`), KEY `All_Tag_Relations_FKIndex1` (`id_tag`), KEY `id_wc` (`id_wc`), KEY `id_tag` (`id_tag`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1; INSERT INTO `all_tag_relations` (`id_tag_rel`, `id_tag`, `id_tutor`, `id_wc`) VALUES (1, 1, 1, NULL), (2, 2, 1, NULL), (3, 1, 1, 1), (4, 2, 1, 1), (5, 3, 1, 1), (6, 4, 1, 1), (7, 6, 2, NULL), (8, 7, 2, NULL), (9, 6, 2, 2), (10, 7, 2, 2), (11, 5, 2, 2), (12, 4, 2, 2); CREATE TABLE IF NOT EXISTS `tags` ( `id_tag` int(10) unsigned NOT NULL AUTO_INCREMENT, `tag` varchar(255) DEFAULT NULL, PRIMARY KEY (`id_tag`), UNIQUE KEY `tag` (`tag`), KEY `id_tag` (`id_tag`), KEY `tag_2` (`tag`), KEY `tag_3` (`tag`), KEY `tag_4` (`tag`), FULLTEXT KEY `tag_5` (`tag`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=8 ; INSERT INTO `tags` (`id_tag`, `tag`) VALUES (1, 'Sandeepan'), (2, 'Nath'), (3, 'first'), (4, 'class'), (5, 'new'), (6, 'Bob'), (7, 'Cratchit'); Please note that for every class, the tag rels of its tutor have to be duplicated. Example, for class with id_wc=1, the tag rel records with id_tag_rel = 3 and 4 are actually extras if you compare with the tag rel records with id_tag_rel = 1 and 2. System 2 (present system - profile edition easy, search difficult) Two separate tables Tutors_Tag_Relations and Webclasses_Tag_Relations have the corresponding tag relations data (Please dump into a separate database)- CREATE TABLE IF NOT EXISTS `tutors_tag_relations` ( `id_tag_rel` int(10) NOT NULL AUTO_INCREMENT, `id_tag` int(10) unsigned NOT NULL DEFAULT '0', `id_tutor` int(10) DEFAULT NULL, PRIMARY KEY (`id_tag_rel`), KEY `All_Tag_Relations_FKIndex1` (`id_tag`), KEY `id_tag` (`id_tag`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1; INSERT INTO `tutors_tag_relations` (`id_tag_rel`, `id_tag`, `id_tutor`) VALUES (1, 1, 1), (2, 2, 1), (3, 6, 2), (4, 7, 2); CREATE TABLE IF NOT EXISTS `webclasses_tag_relations` ( `id_tag_rel` int(10) NOT NULL AUTO_INCREMENT, `id_tag` int(10) unsigned NOT NULL DEFAULT '0', `id_tutor` int(10) DEFAULT NULL, `id_wc` int(10) DEFAULT NULL, PRIMARY KEY (`id_tag_rel`), KEY `webclasses_Tag_Relations_FKIndex1` (`id_tag`), KEY `id_wc` (`id_wc`), KEY `id_tag` (`id_tag`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1; INSERT INTO `webclasses_tag_relations` (`id_tag_rel`, `id_tag`, `id_tutor`, `id_wc`) VALUES (1, 3, 1, 1), (2, 4, 1, 1), (3, 5, 2, 2), (4, 4, 2, 2); CREATE TABLE IF NOT EXISTS `tags` ( `id_tag` int(10) unsigned NOT NULL AUTO_INCREMENT, `tag` varchar(255) DEFAULT NULL, PRIMARY KEY (`id_tag`), UNIQUE KEY `tag` (`tag`), KEY `id_tag` (`id_tag`), KEY `tag_2` (`tag`), KEY `tag_3` (`tag`), KEY `tag_4` (`tag`), FULLTEXT KEY `tag_5` (`tag`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=8 ; INSERT INTO `tags` (`id_tag`, `tag`) VALUES (1, 'Sandeepan'), (2, 'Nath'), (3, 'first'), (4, 'class'), (5, 'new'), (6, 'Bob'), (7, 'Cratchit'); CREATE TABLE IF NOT EXISTS `all_tag_relations` ( `id_tag_rel` int(10) NOT NULL AUTO_INCREMENT, `id_tag` int(10) unsigned NOT NULL DEFAULT '0', `id_tutor` int(10) DEFAULT NULL, `id_wc` int(10) unsigned DEFAULT NULL, PRIMARY KEY (`id_tag_rel`), KEY `All_Tag_Relations_FKIndex1` (`id_tag`), KEY `id_wc` (`id_wc`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1; insert into All_Tag_Relations select NULL,id_tag,id_tutor,NULL from Tutors_Tag_Relations; insert into All_Tag_Relations select NULL,id_tag,id_tutor,id_wc from Webclasses_Tag_Relations; Here you can see how easily tutor first name can be edited only in one place. But search has become really difficult, so on being advised to use a Temporary table, I am creating one at every search request, then dumping all the necessary data and then searching from it, I am creating this All_Tag_Relations table at search run time. Here I am just dumping all the data from the two tables Tutors_Tag_Relations and Webclasses_Tag_Relations. But, I am still not able to get classes if I search with tutor name This is the query which searches "first class". Running them on both the systems shows correct results (returns the class with id_wc = 1). SELECT wtagrels.id_wc,SUM(DISTINCT( wtagrels.id_tag =3)) AS key_1_total_matches, SUM(DISTINCT( wtagrels.id_tag =4)) AS key_2_total_matches FROM all_tag_relations AS wtagrels WHERE ( wtagrels.id_tag =3 OR wtagrels.id_tag =4 ) GROUP BY wtagrels.id_wc HAVING key_1_total_matches = 1 AND key_2_total_matches = 1 LIMIT 0, 20 But, searching for "Sandeepan class" works only with the 1st system Here is the query which searches "Sandeepan class" SELECT wtagrels.id_wc,SUM(DISTINCT( wtagrels.id_tag =1)) AS key_1_total_matches, SUM(DISTINCT( wtagrels.id_tag =4)) AS key_2_total_matches FROM all_tag_relations AS wtagrels WHERE ( wtagrels.id_tag =1 OR wtagrels.id_tag =4 ) GROUP BY wtagrels.id_wc HAVING key_1_total_matches = 1 AND key_2_total_matches = 1 LIMIT 0, 20 Can anybody alter this query and somehow do a proper join or something to get correct results. That solves my problem in a nice way. As you can figure out, the reason why it does not work in system 2 is that in system 1, for every class, one additional tag relation linking class and tutor name is present. e.g. for class first class, (records with id_tag_rel 3 and 4) which returns the class on searching with tutor name. So, you see the trade-off between the search and profile edition difficulty with the two systems. How do I overcome both. I have to reach a conclusion soon. So far my reasoning is it is definitely not good from a code maintainability point of view to follow the single tag rel table structure of system one, because in a real system while editing a field like "tutor qualifications", there can be as many records in tag rels table as there are words in qualification of a tutor (one word in a field = one tag relation). Now suppose a tutor has 100 classes. When he edits his qualification, all the tag rel rows corresponding to him are deleted and then as many copies are to be created (as per the new qualification data) as there are classes. This becomes particularly difficult if later more searcheable fields are added. The code cannot be robust. Is the best solution to follow system 2 (edition has to be in one table - no extra work for each and every class) and somehow re-create the all_tag_relations table like system 1 (from the tables tutor_tag_relations and webclasses_tag_relations), creating the extra tutor tag rels for each and every class by a tutor (which is currently missing in system 2's temporary all_tag_relations table). That would be a time consuming logic script. I doubt that table can be recreated without resorting to PHP sript (mysql alone cannot do that). But the problem is that running all this at search time will make search definitely slow. So, how do such systems work? How are such situations handled? I thought about we can run a cron which initiates that PHP script, say every 1 minute and replaces the existing all_tag_relations table as per new tag rels from tutor_tag_relations and webclasses_tag_relations (replaces means creates a new table, deletes the original and renames the new one as all_tag_relations, otherwise search won't work during that period- or is there any better way to that?). Anyway, the result would be that any changes by tutors will reflect in search in the next 1 minute and not immediately. An alternateve would be to initate that PHP script every time a tutor edits his profile. But here again, since many users may edit their profiles concurrently, will the creation of so many tables be a burden and can mysql make the server slow? Any help would be appreciated and working solution will be accepted as answer. Thanks, Sandeepan

Read the article

MYSQL LIMIT not working as expected - Java

- by Sirish

I have this weird problem in java when trying to fetch records from MYSql database by using the limit function in the query. Not sure what went wrong or did wrong, this query is giving me a hard time. Issue - When I run this query through my java program it returns all the records and not limiting the records to 10 as given in the limit. The same query when ran in MYSql command line, it execute very well and fetches me only 10 recrods. Below is the java code and query. Any help or support is appreciated.! Java code - public UserVO getApplUserDetailsList(UserVO userVO) throws CAPDAOException { List<UserVO> returnList = null; String methodName = "getApplUserDetails()"; Session session = null; String queryString = null; Transaction transaction = null; PreparedStatement ps = null; ResultSet rs = null; if(userVO == null) { logger.writeToTivoliAlertLog(className, CAPConstants.ERROR, methodName, null, "userVO returned null. Busines validation error.!", null); throw new CAPDAOException("userVO returned null. Busines validation error.!",CAPException.BUSINESS_VALIDATION_ERROR_SECURITY); } try { returnList = new ArrayList<UserVO>(); System.out.println(""); String appusr = userVO.getAppUsrNm(); session = getSession(); transaction = session.beginTransaction(); if(userVO.getAppUsrRoleCd()!=null && !userVO.getAppUsrRoleCd().trim().equalsIgnoreCase(CAPConstants.DEFAULT_DROPDOWN_VALUE)){ queryString = "SELECT " + "APPL_USR_ID,APPL_USR_NM,APPL_USR_FRST_NM, " + "APPL_USR_LST_NM,ACCESS_ROLE_CD " + "FROM APPL_USR " + "WHERE " + "APPL_USR_NM LIKE ?"+ " AND APPL_USR_FRST_NM LIKE ?"+ " AND APPL_USR_LST_NM LIKE ?"+ " AND ACCESS_ROLE_CD = ?"+ " AND APPL_USR_ID != ?"; ps = session.connection().prepareStatement(queryString); ps.setString(1,userVO.getAppUsrNm()+CAPConstants.PERCENTILE_SYMBOL); ps.setString(2,userVO.getAppUsrFirstNm()+CAPConstants.PERCENTILE_SYMBOL); ps.setString(3,userVO.getAppUsrLastNm()+CAPConstants.PERCENTILE_SYMBOL); ps.setString(4,userVO.getAppUsrRoleCd()); ps.setInt(5, 1); } else { queryString = "SELECT " + "APPL_USR_ID,APPL_USR_NM,APPL_USR_FRST_NM, " + "APPL_USR_LST_NM,ACCESS_ROLE_CD " + "FROM APPL_USR " + "WHERE " + "APPL_USR_NM LIKE ?"+ " AND APPL_USR_FRST_NM LIKE ?"+ " AND APPL_USR_LST_NM LIKE ?"+ " AND APPL_USR_ID != ?"; ps = session.connection().prepareStatement(queryString); ps.setString(1,userVO.getAppUsrNm()+CAPConstants.PERCENTILE_SYMBOL); ps.setString(2,userVO.getAppUsrFirstNm()+CAPConstants.PERCENTILE_SYMBOL); ps.setString(3,userVO.getAppUsrLastNm()+CAPConstants.PERCENTILE_SYMBOL); ps.setInt(4, 1); } if(userVO.getQueryAction()!=null && userVO.getQueryAction().equals(CAPConstants.GET_DATA)) queryString += " ORDER BY APPL_USR_ID LIMIT " + userVO.getPAGE_MIN_LIMIT() + ", " + userVO.getPAGE_MAX_LIMIT(); else queryString += " ORDER BY APPL_USR_ID"; rs = ps.executeQuery(); if(userVO.getQueryAction()!=null && userVO.getQueryAction().equals(CAPConstants.GET_DATA)) { int tempCOunt = 0; while(rs!=null && rs.next()) { tempCOunt ++; UserVO returnVO = new UserVO(); returnVO.setAppUsrId(rs.getInt("APPL_USR_ID")); returnVO.setAppUsrNm(rs.getString("APPL_USR_NM")); returnVO.setAppUsrFirstNm(rs.getString("APPL_USR_FRST_NM")); returnVO.setAppUsrLastNm(rs.getString("APPL_USR_LST_NM")); if (rs.getString("ACCESS_ROLE_CD")!=null && rs.getString("ACCESS_ROLE_CD").trim().equalsIgnoreCase(CAPConstants.ADMINISTRATOR_ROLE_CD)) returnVO.setApplicationLevelRole("Administrator"); else if (rs.getString("ACCESS_ROLE_CD")!=null && rs.getString("ACCESS_ROLE_CD").trim().equalsIgnoreCase(CAPConstants.MAINTAINER_ROLE_CD)) returnVO.setApplicationLevelRole("Maintainer"); else if (rs.getString("ACCESS_ROLE_CD")!=null && rs.getString("ACCESS_ROLE_CD").trim().equalsIgnoreCase(CAPConstants.VIEWER_ROLE_CD)) returnVO.setApplicationLevelRole("Viewer"); else returnVO.setApplicationLevelRole("None"); returnList.add(returnVO); } System.out.println("Count >>>>>>>>>>>>>>>>>>> "+tempCOunt); userVO.setReturnListFromDB(returnList); } else { int rowcount = 0; if (rs.last()) { rowcount = rs.getRow(); rs.beforeFirst(); // not rs.first() because the rs.next() below will move on, missing the first element } userVO.setTotalRecordCount(rowcount); System.out.println("Total count of the records to be used for pagination >> "+rowcount); rowcount = 0; while(rs!=null && rs.next()) { rowcount ++; UserVO returnVO = new UserVO(); returnVO.setAppUsrId(rs.getInt("APPL_USR_ID")); returnVO.setAppUsrNm(rs.getString("APPL_USR_NM")); returnVO.setAppUsrFirstNm(rs.getString("APPL_USR_FRST_NM")); returnVO.setAppUsrLastNm(rs.getString("APPL_USR_LST_NM")); if (rs.getString("ACCESS_ROLE_CD")!=null && rs.getString("ACCESS_ROLE_CD").trim().equalsIgnoreCase(CAPConstants.ADMINISTRATOR_ROLE_CD)) returnVO.setApplicationLevelRole("Administrator"); else if (rs.getString("ACCESS_ROLE_CD")!=null && rs.getString("ACCESS_ROLE_CD").trim().equalsIgnoreCase(CAPConstants.MAINTAINER_ROLE_CD)) returnVO.setApplicationLevelRole("Maintainer"); else if (rs.getString("ACCESS_ROLE_CD")!=null && rs.getString("ACCESS_ROLE_CD").trim().equalsIgnoreCase(CAPConstants.VIEWER_ROLE_CD)) returnVO.setApplicationLevelRole("Viewer"); else returnVO.setApplicationLevelRole("None"); returnList.add(returnVO); System.out.println("Row count >>"+rowcount); if(rowcount == CAPConstants.PAGINATION_MAX_VALUE) break; } rowcount = 0; userVO.setReturnListFromDB(returnList); } System.out.println("returnList >>"+returnList); return userVO; } catch (Throwable e) { e.printStackTrace(); logger.writeToTivoliAlertLog(className, CAPConstants.ERROR, methodName, userVO.getAppUsrNm(), "Error occured while trying to fetch application user details. Printing stack trace to the log for analysis..", e); throw new CAPDAOException("Error occured while trying to fetch application user details.",CAPException.SPEXECUTION_ERROR_CODE); } finally{ closeTransactionAndSession(session,transaction); } } MYSQL Query - SELECT APPL_USR_ID,APPL_USR_NM,APPL_USR_FRST_NM, APPL_USR_LST_NM,ACCESS_ROLE_CD FROM APPL_USR WHERE APPL_USR_NM LIKE '%' AND APPL_USR_FRST_NM LIKE '%' AND APPL_USR_LST_NM LIKE '%' AND APPL_USR_ID != 1 ORDER BY APPL_USR_ID LIMIT 10, 10

Read the article

wrong return value with jquery ajax and codeigniter

- by matthew

I do not know if this is specifically a jquery problem, actually I think it has to mostly do with my logic in the php code. What Im trying to do is make a voting system that when the user clicks on the vote up or vote down link in the web page, it triggers an ajax call to a php function that first updates the database with with the required value, on success of the database updating the another function is called just to get the required updated html for the that particular post that the user has voted on. (hope I havnt lost you). The problem I think deals with specifically with this one line of code. When I make the call it only returns the value of $row-beer_down and completly ignores everything else in that line. Funny thing is the same php code to display the html view works perfectly before the ajax function updates it. echo "<p>Score " . $row->beer_up + $row->beer_down . "</p>"; so here is the code to hope you can help as I have absolutely no idea how to fix this. here is the view file where it generates the page. This part is the query ajax function. <script type="text/javascript"> $(function() { $(".vote").click(function(){ var id = $(this).attr("id"); var name = $(this).attr("name"); var dataString = 'id='+ id ; var parent = $(this); if(name=='up') { $.ajax({ type: "POST", url: "http://127.0.0.1/CodeIgniter/blog/add_vote/" + id, data: dataString, cache: false, success: function(html) { //parent.html(html); $("." + id).load('http://127.0.0.1/CodeIgniter/blog/get_post/' + id).fadeIn("slow"); } }); } else { $.ajax({ type: "POST", url: "http://127.0.0.1/CodeIgniter/blog/minus_vote/" + id, data: dataString, cache: false, success: function(html) { //parent.html(html); $("." + id).load('http://127.0.0.1/CodeIgniter/blog/get_post/' + id).fadeIn("slow"); } }); } return false; }); }); </script> Here is the html and php part of the page to display the post. div id="post_container"> <?php //echo $this->table->generate($records); ?> <?php foreach($records->result() as $row) { ?> <?php echo "<div id=\"post\" class=\"" . $row->id . "\">"; ?> <h2><?php echo $row->id ?></h2> <?php echo "<img src=\"" . base_url() . $dir . $row->account_id . "/" . $row->file_name . "\">" ?> <p><?php echo $row->content ?></p> <p><?php echo $row->user_name ?> On <?php echo $row->time ?></p> <p>Score <?php echo $row->beer_up + $row->beer_down ?></p> <?php echo anchor('blog/add_vote/' . $row->id, 'Up Vote', array('class' => 'vote', 'id' => $row->id, 'name' => 'up')); echo anchor('blog/minus_vote/' . $row->id, 'Down Vote', array('class' => 'vote', 'id' => $row->id, 'name' => 'down')); echo anchor('blog/comments/' . $row->id, 'View Comments'); ?> </div> <?php } ?> here is the function the ajax calls when it is successfull: function get_post() { $this->db->where('id', $this->uri->segment(3)); $records = $this->db->get('post'); $dir = "/uploads/user_uploads/"; foreach($records->result() as $row) { echo "<div id=\"post\" class=\"" . $row->id . "\">"; echo "<h2>" . $row->id . "</h2>"; echo "<img src=\"" . base_url() . $dir . $row->account_id . "/" . $row->file_name . "\">"; echo "<p>" . $row->content . "</p>"; echo "<p>" . $row->user_name . " On " . $row->time . "</p>"; echo "<p>Score " . $row->beer_up + $row->beer_down . "</p>"; echo "<p>Up score" . $row->beer_up . "beer down" . $row->beer_down . "</p>"; echo anchor('blog/comments/' . $row->id, 'View Comments'); echo "</div>"; }

Read the article

What's New in ASP.NET 4

- by Navaneeth

The .NET Framework version 4 includes enhancements for ASP.NET 4 in targeted areas. Visual Studio 2010 and Microsoft Visual Web Developer Express also include enhancements and new features for improved Web development. This document provides an overview of many of the new features that are included in the upcoming release. This topic contains the following sections: ASP.NET Core Services ASP.NET Web Forms ASP.NET MVC Dynamic Data ASP.NET Chart Control Visual Web Developer Enhancements Web Application Deployment with Visual Studio 2010 Enhancements to ASP.NET Multi-Targeting ASP.NET Core Services ASP.NET 4 introduces many features that improve core ASP.NET services such as output caching and session state storage. Extensible Output Caching Since the time that ASP.NET 1.0 was released, output caching has enabled developers to store the generated output of pages, controls, and HTTP responses in memory. On subsequent Web requests, ASP.NET can serve content more quickly by retrieving the generated output from memory instead of regenerating the output from scratch. However, this approach has a limitation — generated content always has to be stored in memory. On servers that experience heavy traffic, the memory requirements for output caching can compete with memory requirements for other parts of a Web application. ASP.NET 4 adds extensibility to output caching that enables you to configure one or more custom output-cache providers. Output-cache providers can use any storage mechanism to persist HTML content. These storage options can include local or remote disks, cloud storage, and distributed cache engines. Output-cache provider extensibility in ASP.NET 4 lets you design more aggressive and more intelligent output-caching strategies for Web sites. For example, you can create an output-cache provider that caches the "Top 10" pages of a site in memory, while caching pages that get lower traffic on disk. Alternatively, you can cache every vary-by combination for a rendered page, but use a distributed cache so that the memory consumption is offloaded from front-end Web servers. You create a custom output-cache provider as a class that derives from the OutputCacheProvider type. You can then configure the provider in the Web.config file by using the new providers subsection of the outputCache element For more information and for examples that show how to configure the output cache, see outputCache Element for caching (ASP.NET Settings Schema). For more information about the classes that support caching, see the documentation for the OutputCache and OutputCacheProvider classes. By default, in ASP.NET 4, all HTTP responses, rendered pages, and controls use the in-memory output cache. The defaultProvider attribute for ASP.NET is AspNetInternalProvider. You can change the default output-cache provider used for a Web application by specifying a different provider name for defaultProvider attribute. In addition, you can select different output-cache providers for individual control and for individual requests and programmatically specify which provider to use. For more information, see the HttpApplication.GetOutputCacheProviderName(HttpContext) method. The easiest way to choose a different output-cache provider for different Web user controls is to do so declaratively by using the new providerName attribute in a page or control directive, as shown in the following example: <%@ OutputCache Duration="60" VaryByParam="None" providerName="DiskCache" %> Preloading Web Applications Some Web applications must load large amounts of data or must perform expensive initialization processing before serving the first request. In earlier versions of ASP.NET, for these situations you had to devise custom approaches to "wake up" an ASP.NET application and then run initialization code during the Application_Load method in the Global.asax file. To address this scenario, a new application preload manager (autostart feature) is available when ASP.NET 4 runs on IIS 7.5 on Windows Server 2008 R2. The preload feature provides a controlled approach for starting up an application pool, initializing an ASP.NET application, and then accepting HTTP requests. It lets you perform expensive application initialization prior to processing the first HTTP request. For example, you can use the application preload manager to initialize an application and then signal a load-balancer that the application was initialized and ready to accept HTTP traffic. To use the application preload manager, an IIS administrator sets an application pool in IIS 7.5 to be automatically started by using the following configuration in the applicationHost.config file: <applicationPools> <add name="MyApplicationPool" startMode="AlwaysRunning" /> </applicationPools> Because a single application pool can contain multiple applications, you specify individual applications to be automatically started by using the following configuration in the applicationHost.config file: <sites> <site name="MySite" id="1"> <application path="/" serviceAutoStartEnabled="true" serviceAutoStartProvider="PrewarmMyCache" >  </application> </site> </sites>  <serviceAutoStartProviders> <add name="PrewarmMyCache" type="MyNamespace.CustomInitialization, MyLibrary" /> </serviceAutoStartProviders> When an IIS 7.5 server is cold-started or when an individual application pool is recycled, IIS 7.5 uses the information in the applicationHost.config file to determine which Web applications have to be automatically started. For each application that is marked for preload, IIS7.5 sends a request to ASP.NET 4 to start the application in a state during which the application temporarily does not accept HTTP requests. When it is in this state, ASP.NET instantiates the type defined by the serviceAutoStartProvider attribute (as shown in the previous example) and calls into its public entry point. You create a managed preload type that has the required entry point by implementing the IProcessHostPreloadClient interface, as shown in the following example: public class CustomInitialization : System.Web.Hosting.IProcessHostPreloadClient { public void Preload(string[] parameters) { // Perform initialization. } } After your initialization code runs in the Preload method and after the method returns, the ASP.NET application is ready to process requests. Permanently Redirecting a Page Content in Web applications is often moved over the lifetime of the application. This can lead to links to be out of date, such as the links that are returned by search engines. In ASP.NET, developers have traditionally handled requests to old URLs by using the Redirect method to forward a request to the new URL. However, the Redirect method issues an HTTP 302 (Found) response (which is used for a temporary redirect). This results in an extra HTTP round trip. ASP.NET 4 adds a RedirectPermanent helper method that makes it easy to issue HTTP 301 (Moved Permanently) responses, as in the following example: RedirectPermanent("/newpath/foroldcontent.aspx"); Search engines and other user agents that recognize permanent redirects will store the new URL that is associated with the content, which eliminates the unnecessary round trip made by the browser for temporary redirects. Session State Compression By default, ASP.NET provides two options for storing session state across a Web farm. The first option is a session state provider that invokes an out-of-process session state server. The second option is a session state provider that stores data in a Microsoft SQL Server database. Because both options store state information outside a Web application's worker process, session state has to be serialized before it is sent to remote storage. If a large amount of data is saved in session state, the size of the serialized data can become very large. ASP.NET 4 introduces a new compression option for both kinds of out-of-process session state providers. By using this option, applications that have spare CPU cycles on Web servers can achieve substantial reductions in the size of serialized session state data. You can set this option using the new compressionEnabled attribute of the sessionState element in the configuration file. When the compressionEnabled configuration option is set to true, ASP.NET compresses (and decompresses) serialized session state by using the .NET Framework GZipStreamclass. The following example shows how to set this attribute. <sessionState mode="SqlServer" sqlConnectionString="data source=dbserver;Initial Catalog=aspnetstate" allowCustomSqlDatabase="true" compressionEnabled="true" /> ASP.NET Web Forms Web Forms has been a core feature in ASP.NET since the release of ASP.NET 1.0. Many enhancements have been in this area for ASP.NET 4, such as the following: The ability to set meta tags. More control over view state. Support for recently introduced browsers and devices. Easier ways to work with browser capabilities. Support for using ASP.NET routing with Web Forms. More control over generated IDs. The ability to persist selected rows in data controls. More control over rendered HTML in the FormView and ListView controls. Filtering support for data source controls. Enhanced support for Web standards and accessibility Setting Meta Tags with the Page.MetaKeywords and Page.MetaDescription Properties Two properties have been added to the Page class: MetaKeywords and MetaDescription. These two properties represent corresponding meta tags in the HTML rendered for a page, as shown in the following example: <head id="Head1" runat="server"> <title>Untitled Page</title> <meta name="keywords" content="keyword1, keyword2' /> <meta name="description" content="Description of my page" /> </head> These two properties work like the Title property does, and they can be set in the @ Page directive. For more information, see Page.MetaKeywords and Page.MetaDescription. Enabling View State for Individual Controls A new property has been added to the Control class: ViewStateMode. You can use this property to disable view state for all controls on a page except those for which you explicitly enable view state. View state data is included in a page's HTML and increases the amount of time it takes to send a page to the client and post it back. Storing more view state than is necessary can cause significant decrease in performance. In earlier versions of ASP.NET, you could reduce the impact of view state on a page's performance by disabling view state for specific controls. But sometimes it is easier to enable view state for a few controls that need it instead of disabling it for many that do not need it. For more information, see Control.ViewStateMode. Support for Recently Introduced Browsers and Devices ASP.NET includes a feature that is named browser capabilities that lets you determine the capabilities of the browser that a user is using. Browser capabilities are represented by the HttpBrowserCapabilities object which is stored in the HttpRequest.Browser property. Information about a particular browser's capabilities is defined by a browser definition file. In ASP.NET 4, these browser definition files have been updated to contain information about recently introduced browsers and devices such as Google Chrome, Research in Motion BlackBerry smart phones, and Apple iPhone. Existing browser definition files have also been updated. For more information, see How to: Upgrade an ASP.NET Web Application to ASP.NET 4 and ASP.NET Web Server Controls and Browser Capabilities. The browser definition files that are included with ASP.NET 4 are shown in the following list: •blackberry.browser •chrome.browser •Default.browser •firefox.browser •gateway.browser •generic.browser •ie.browser •iemobile.browser •iphone.browser •opera.browser •safari.browser A New Way to Define Browser Capabilities ASP.NET 4 includes a new feature referred to as browser capabilities providers. As the name suggests, this lets you build a provider that in turn lets you write custom code to determine browser capabilities. In ASP.NET version 3.5 Service Pack 1, you define browser capabilities in an XML file. This file resides in a machine-level folder or an application-level folder. Most developers do not need to customize these files, but for those who do, the provider approach can be easier than dealing with complex XML syntax. The provider approach makes it possible to simplify the process by implementing a common browser definition syntax, or a database that contains up-to-date browser definitions, or even a Web service for such a database. For more information about the new browser capabilities provider, see the What's New for ASP.NET 4 White Paper. Routing in ASP.NET 4 ASP.NET 4 adds built-in support for routing with Web Forms. Routing is a feature that was introduced with ASP.NET 3.5 SP1 and lets you configure an application to use URLs that are meaningful to users and to search engines because they do not have to specify physical file names. This can make your site more user-friendly and your site content more discoverable by search engines. For example, the URL for a page that displays product categories in your application might look like the following example: http://website/products.aspx?categoryid=12 By using routing, you can use the following URL to render the same information: http://website/products/software The second URL lets the user know what to expect and can result in significantly improved rankings in search engine results. the new features include the following: The PageRouteHandler class is a simple HTTP handler that you use when you define routes. You no longer have to write a custom route handler. The HttpRequest.RequestContext and Page.RouteData properties make it easier to access information that is passed in URL parameters. The RouteUrl expression provides a simple way to create a routed URL in markup. The RouteValue expression provides a simple way to extract URL parameter values in markup. The RouteParameter class makes it easier to pass URL parameter values to a query for a data source control (similar to FormParameter). You no longer have to change the Web.config file to enable routing. For more information about routing, see the following topics: ASP.NET Routing Walkthrough: Using ASP.NET Routing in a Web Forms Application How to: Define Routes for Web Forms Applications How to: Construct URLs from Routes How to: Access URL Parameters in a Routed Page Setting Client IDs The new ClientIDMode property makes it easier to write client script that references HTML elements rendered for server controls. Increasing use of Microsoft Ajax makes the need to do this more common. For example, you may have a data control that renders a long list of products with prices and you want to use client script to make a Web service call and update individual prices in the list as they change without refreshing the entire page. Typically you get a reference to an HTML element in client script by using the document.GetElementById method. You pass to this method the value of the id attribute of the HTML element you want to reference. In the case of elements that are rendered for ASP.NET server controls earlier versions of ASP.NET could make this difficult or impossible. You were not always able to predict what id values ASP.NET would generate, or ASP.NET could generate very long id values. The problem was especially difficult for data controls that would generate multiple rows for a single instance of the control in your markup. ASP.NET 4 adds two new algorithms for generating id attributes. These algorithms can generate id attributes that are easier to work with in client script because they are more predictable and that are easier to work with because they are simpler. For more information about how to use the new algorithms, see the following topics: ASP.NET Web Server Control Identification Walkthrough: Making Data-Bound Controls Easier to Access from JavaScript Walkthrough: Making Controls Located in Web User Controls Easier to Access from JavaScript How to: Access Controls from JavaScript by ID Persisting Row Selection in Data Controls The GridView and ListView controls enable users to select a row. In previous versions of ASP.NET, row selection was based on the row index on the page. For example, if you select the third item on page 1 and then move to page 2, the third item on page 2 is selected. In most cases, is more desirable not to select any rows on page 2. ASP.NET 4 supports Persisted Selection, a new feature that was initially supported only in Dynamic Data projects in the .NET Framework 3.5 SP1. When this feature is enabled, the selected item is based on the row data key. This means that if you select the third row on page 1 and move to page 2, nothing is selected on page 2. When you move back to page 1, the third row is still selected. This is a much more natural behavior than the behavior in earlier versions of ASP.NET. Persisted selection is now supported for the GridView and ListView controls in all projects. You can enable this feature in the GridView control, for example, by setting the EnablePersistedSelection property, as shown in the following example: <asp:GridView id="GridView2" runat="server" PersistedSelection="true"> </asp:GridView> FormView Control Enhancements The FormView control is enhanced to make it easier to style the content of the control with CSS. In previous versions of ASP.NET, the FormView control rendered it contents using an item template. This made styling more difficult in the markup because unexpected table row and table cell tags were rendered by the control. The FormView control supports RenderOuterTable, a property in ASP.NET 4. When this property is set to false, as show in the following example, the table tags are not rendered. This makes it easier to apply CSS style to the contents of the control. <asp:FormView ID="FormView1" runat="server" RenderTable="false"> For more information, see FormView Web Server Control Overview. ListView Control Enhancements The ListView control, which was introduced in ASP.NET 3.5, has all the functionality of the GridView control while giving you complete control over the output. This control has been made easier to use in ASP.NET 4. The earlier version of the control required that you specify a layout template that contained a server control with a known ID. The following markup shows a typical example of how to use the ListView control in ASP.NET 3.5. <asp:ListView ID="ListView1" runat="server"> <LayoutTemplate> <asp:PlaceHolder ID="ItemPlaceHolder" runat="server"></asp:PlaceHolder> </LayoutTemplate> <ItemTemplate> <% Eval("LastName")%> </ItemTemplate> </asp:ListView> In ASP.NET 4, the ListView control does not require a layout template. The markup shown in the previous example can be replaced with the following markup: <asp:ListView ID="ListView1" runat="server"> <ItemTemplate> <% Eval("LastName")%> </ItemTemplate> </asp:ListView> For more information, see ListView Web Server Control Overview. Filtering Data with the QueryExtender Control A very common task for developers who create data-driven Web pages is to filter data. This traditionally has been performed by building Where clauses in data source controls. This approach can be complicated, and in some cases the Where syntax does not let you take advantage of the full functionality of the underlying database. To make filtering easier, a new QueryExtender control has been added in ASP.NET 4. This control can be added to EntityDataSource or LinqDataSource controls in order to filter the data returned by these controls. Because the QueryExtender control relies on LINQ, but you do not to need to know how to write LINQ queries to use the query extender. The QueryExtender control supports a variety of filter options. The following lists QueryExtender filter options. Term Definition SearchExpression Searches a field or fields for string values and compares them to a specified string value. RangeExpression Searches a field or fields for values in a range specified by a pair of values. PropertyExpression Compares a specified value to a property value in a field. If the expression evaluates to true, the data that is being examined is returned. OrderByExpression Sorts data by a specified column and sort direction. CustomExpression Calls a function that defines custom filter in the page. For more information, see QueryExtenderQueryExtender Web Server Control Overview. Enhanced Support for Web Standards and Accessibility Earlier versions of ASP.NET controls sometimes render markup that does not conform to HTML, XHTML, or accessibility standards. ASP.NET 4 eliminates most of these exceptions. For details about how the HTML that is rendered by each control meets accessibility standards, see ASP.NET Controls and Accessibility. CSS for Controls that Can be Disabled In ASP.NET 3.5, when a control is disabled (see WebControl.Enabled), a disabled attribute is added to the rendered HTML element. For example, the following markup creates a Label control that is disabled: <asp:Label id="Label1" runat="server" Text="Test" Enabled="false" /> In ASP.NET 3.5, the previous control settings generate the following HTML: <span id="Label1" disabled="disabled">Test</span> In HTML 4.01, the disabled attribute is not considered valid on span elements. It is valid only on input elements because it specifies that they cannot be accessed. On display-only elements such as span elements, browsers typically support rendering for a disabled appearance, but a Web page that relies on this non-standard behavior is not robust according to accessibility standards. For display-only elements, you should use CSS to indicate a disabled visual appearance. Therefore, by default ASP.NET 4 generates the following HTML for the control settings shown previously: <span id="Label1" class="aspNetDisabled">Test</span> You can change the value of the class attribute that is rendered by default when a control is disabled by setting the DisabledCssClass property. CSS for Validation Controls In ASP.NET 3.5, validation controls render a default color of red as an inline style. For example, the following markup creates a RequiredFieldValidator control: <asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" ErrorMessage="Required Field" ControlToValidate="RadioButtonList1" /> ASP.NET 3.5 renders the following HTML for the validator control: <span id="RequiredFieldValidator1" style="color:Red;visibility:hidden;">RequiredFieldValidator</span> By default, ASP.NET 4 does not render an inline style to set the color to red. An inline style is used only to hide or show the validator, as shown in the following example: <span id="RequiredFieldValidator1" style"visibility:hidden;">RequiredFieldValidator</span> Therefore, ASP.NET 4 does not automatically show error messages in red. For information about how to use CSS to specify a visual style for a validation control, see Validating User Input in ASP.NET Web Pages. CSS for the Hidden Fields Div Element ASP.NET uses hidden fields to store state information such as view state and control state. These hidden fields are contained by a div element. In ASP.NET 3.5, this div element does not have a class attribute or an id attribute. Therefore, CSS rules that affect all div elements could unintentionally cause this div to be visible. To avoid this problem, ASP.NET 4 renders the div element for hidden fields with a CSS class that you can use to differentiate the hidden fields div from others. The new classvalue is shown in the following example: <div class="aspNetHidden"> CSS for the Table, Image, and ImageButton Controls By default, in ASP.NET 3.5, some controls set the border attribute of rendered HTML to zero (0). The following example shows HTML that is generated by the Table control in ASP.NET 3.5: <table id="Table2" border="0"> The Image control and the ImageButton control also do this. Because this is not necessary and provides visual formatting information that should be provided by using CSS, the attribute is not generated in ASP.NET 4. CSS for the UpdatePanel and UpdateProgress Controls In ASP.NET 3.5, the UpdatePanel and UpdateProgress controls do not support expando attributes. This makes it impossible to set a CSS class on the HTMLelements that they render. In ASP.NET 4 these controls have been changed to accept expando attributes, as shown in the following example: <asp:UpdatePanel runat="server" class="myStyle"> </asp:UpdatePanel> The following HTML is rendered for this markup: <div id="ctl00_MainContent_UpdatePanel1" class="expandoclass"> </div> Eliminating Unnecessary Outer Tables In ASP.NET 3.5, the HTML that is rendered for the following controls is wrapped in a table element whose purpose is to apply inline styles to the entire control: FormView Login PasswordRecovery ChangePassword If you use templates to customize the appearance of these controls, you can specify CSS styles in the markup that you provide in the templates. In that case, no extra outer table is required. In ASP.NET 4, you can prevent the table from being rendered by setting the new RenderOuterTable property to false. Layout Templates for Wizard Controls In ASP.NET 3.5, the Wizard and CreateUserWizard controls generate an HTML table element that is used for visual formatting. In ASP.NET 4 you can use a LayoutTemplate element to specify the layout. If you do this, the HTML table element is not generated. In the template, you create placeholder controls to indicate where items should be dynamically inserted into the control. (This is similar to how the template model for the ListView control works.) For more information, see the Wizard.LayoutTemplate property. New HTML Formatting Options for the CheckBoxList and RadioButtonList Controls ASP.NET 3.5 uses HTML table elements to format the output for the CheckBoxList and RadioButtonList controls. To provide an alternative that does not use tables for visual formatting, ASP.NET 4 adds two new options to the RepeatLayout enumeration: UnorderedList. This option causes the HTML output to be formatted by using ul and li elements instead of a table. OrderedList. This option causes the HTML output to be formatted by using ol and li elements instead of a table. For examples of HTML that is rendered for the new options, see the RepeatLayout enumeration. Header and Footer Elements for the Table Control In ASP.NET 3.5, the Table control can be configured to render thead and tfoot elements by setting the TableSection property of the TableHeaderRow class and the TableFooterRow class. In ASP.NET 4 these properties are set to the appropriate values by default. CSS and ARIA Support for the Menu Control In ASP.NET 3.5, the Menu control uses HTML table elements for visual formatting, and in some configurations it is not keyboard-accessible. ASP.NET 4 addresses these problems and improves accessibility in the following ways: The generated HTML is structured as an unordered list (ul and li elements). CSS is used for visual formatting. The menu behaves in accordance with ARIA standards for keyboard access. You can use arrow keys to navigate menu items. (For information about ARIA, see Accessibility in Visual Studio and ASP.NET.) ARIA role and property attributes are added to the generated HTML. (Attributes are added by using JavaScript instead of included in the HTML, to avoid generating HTML that would cause markup validation errors.) Styles for the Menu control are rendered in a style block at the top of the page, instead of inline with the rendered HTML elements. If you want to use a separate CSS file so that you can modify the menu styles, you can set the Menu control's new IncludeStyleBlock property to false, in which case the style block is not generated. Valid XHTML for the HtmlForm Control In ASP.NET 3.5, the HtmlForm control (which is created implicitly by the <form runat="server"> tag) renders an HTML form element that has both name and id attributes. The name attribute is deprecated in XHTML 1.1. Therefore, this control does not render the name attribute in ASP.NET 4. Maintaining Backward Compatibility in Control Rendering An existing ASP.NET Web site might have code in it that assumes that controls are rendering HTML the way they do in ASP.NET 3.5. To avoid causing backward compatibility problems when you upgrade the site to ASP.NET 4, you can have ASP.NET continue to generate HTML the way it does in ASP.NET 3.5 after you upgrade the site. To do so, you can set the controlRenderingCompatibilityVersion attribute of the pages element to "3.5" in the Web.config file of an ASP.NET 4 Web site, as shown in the following example: <system.web> <pages controlRenderingCompatibilityVersion="3.5"/> </system.web> If this setting is omitted, the default value is the same as the version of ASP.NET that the Web site targets. (For information about multi-targeting in ASP.NET, see .NET Framework Multi-Targeting for ASP.NET Web Projects.) ASP.NET MVC ASP.NET MVC helps Web developers build compelling standards-based Web sites that are easy to maintain because it decreases the dependency among application layers by using the Model-View-Controller (MVC) pattern. MVC provides complete control over the page markup. It also improves testability by inherently supporting Test Driven Development (TDD). Web sites created using ASP.NET MVC have a modular architecture. This allows members of a team to work independently on the various modules and can be used to improve collaboration. For example, developers can work on the model and controller layers (data and logic), while the designer work on the view (presentation). For tutorials, walkthroughs, conceptual content, code samples, and a complete API reference, see ASP.NET MVC 2. Dynamic Data Dynamic Data was introduced in the .NET Framework 3.5 SP1 release in mid-2008. This feature provides many enhancements for creating data-driven applications, such as the following: A RAD experience for quickly building a data-driven Web site. Automatic validation that is based on constraints defined in the data model. The ability to easily change the markup that is generated for fields in the GridView and DetailsView controls by using field templates that are part of your Dynamic Data project. For ASP.NET 4, Dynamic Data has been enhanced to give developers even more power for quickly building data-driven Web sites. For more information, see ASP.NET Dynamic Data Content Map. Enabling Dynamic Data for Individual Data-Bound Controls in Existing Web Applications You can use Dynamic Data features in existing ASP.NET Web applications that do not use scaffolding by enabling Dynamic Data for individual data-bound controls. Dynamic Data provides the presentation and data layer support for rendering these controls. When you enable Dynamic Data for data-bound controls, you get the following benefits: Setting default values for data fields. Dynamic Data enables you to provide default values at run time for fields in a data control. Interacting with the database without creating and registering a data model. Automatically validating the data that is entered by the user without writing any code. For more information, see Walkthrough: Enabling Dynamic Data in ASP.NET Data-Bound Controls. New Field Templates for URLs and E-mail Addresses ASP.NET 4 introduces two new built-in field templates, EmailAddress.ascx and Url.ascx. These templates are used for fields that are marked as EmailAddress or Url using the DataTypeAttribute attribute. For EmailAddress objects, the field is displayed as a hyperlink that is created by using the mailto: protocol. When users click the link, it opens the user's e-mail client and creates a skeleton message. Objects typed as Url are displayed as ordinary hyperlinks. The following example shows how to mark fields. [DataType(DataType.EmailAddress)] public object HomeEmail { get; set; } [DataType(DataType.Url)] public object Website { get; set; } Creating Links with the DynamicHyperLink Control Dynamic Data uses the new routing feature that was added in the .NET Framework 3.5 SP1 to control the URLs that users see when they access the Web site. The new DynamicHyperLink control makes it easy to build links to pages in a Dynamic Data site. For information, see How to: Create Table Action Links in Dynamic Data Support for Inheritance in the Data Model Both the ADO.NET Entity Framework and LINQ to SQL support inheritance in their data models. An example of this might be a database that has an InsurancePolicy table. It might also contain CarPolicy and HousePolicy tables that have the same fields as InsurancePolicy and then add more fields. Dynamic Data has been modified to understand inherited objects in the data model and to support scaffolding for the inherited tables. For more information, see Walkthrough: Mapping Table-per-Hierarchy Inheritance in Dynamic Data. Support for Many-to-Many Relationships (Entity Framework Only) The Entity Framework has rich support for many-to-many relationships between tables, which is implemented by exposing the relationship as a collection on an Entity object. New field templates (ManyToMany.ascx and ManyToMany_Edit.ascx) have been added to provide support for displaying and editing data that is involved in many-to-many relationships. For more information, see Working with Many-to-Many Data Relationships in Dynamic Data. New Attributes to Control Display and Support Enumerations The DisplayAttribute has been added to give you additional control over how fields are displayed. The DisplayNameAttribute attribute in earlier versions of Dynamic Data enabled you to change the name that is used as a caption for a field. The new DisplayAttribute class lets you specify more options for displaying a field, such as the order in which a field is displayed and whether a field will be used as a filter. The attribute also provides independent control of the name that is used for the labels in a GridView control, the name that is used in a DetailsView control, the help text for the field, and the watermark used for the field (if the field accepts text input). The EnumDataTypeAttribute class has been added to let you map fields to enumerations. When you apply this attribute to a field, you specify an enumeration type. Dynamic Data uses the new Enumeration.ascx field template to create UI for displaying and editing enumeration values. The template maps the values from the database to the names in the enumeration. Enhanced Support for Filters Dynamic Data 1.0 had built-in filters for Boolean columns and foreign-key columns. The filters did not let you specify the order in which they were displayed. The new DisplayAttribute attribute addresses this by giving you control over whether a column appears as a filter and in what order it will be displayed. An additional enhancement is that filtering support has been rewritten to use the new QueryExtender feature of Web Forms. This lets you create filters without requiring knowledge of the data source control that the filters will be used with. Along with these extensions, filters have also been turned into template controls, which lets you add new ones. Finally, the DisplayAttribute class mentioned earlier allows the default filter to be overridden, in the same way that UIHint allows the default field template for a column to be overridden. For more information, see Walkthrough: Filtering Rows in Tables That Have a Parent-Child Relationship and QueryableFilterRepeater. ASP.NET Chart Control The ASP.NET chart server control enables you to create ASP.NET pages applications that have simple, intuitive charts for complex statistical or financial analysis. The chart control supports the following features: Data series, chart areas, axes, legends, labels, titles, and more. Data binding. Data manipulation, such as copying, splitting, merging, alignment, grouping, sorting, searching, and filtering. Statistical formulas and financial formulas. Advanced chart appearance, such as 3-D, anti-aliasing, lighting, and perspective. Events and customizations. Interactivity and Microsoft Ajax. Support for the Ajax Content Delivery Network (CDN), which provides an optimized way for you to add Microsoft Ajax Library and jQuery scripts to your Web applications. For more information, see Chart Web Server Control Overview. Visual Web Developer Enhancements The following sections provide information about enhancements and new features in Visual Studio 2010 and Visual Web Developer Express. The Web page designer in Visual Studio 2010 has been enhanced for better CSS compatibility, includes additional support for HTML and ASP.NET markup snippets, and features a redesigned version of IntelliSense for JScript. Improved CSS Compatibility The Visual Web Developer designer in Visual Studio 2010 has been updated to improve CSS 2.1 standards compliance. The designer better preserves HTML source code and is more robust than in previous versions of Visual Studio. HTML and JScript Snippets In the HTML editor, IntelliSense auto-completes tag names. The IntelliSense Snippets feature auto-completes whole tags and more. In Visual Studio 2010, IntelliSense snippets are supported for JScript, alongside C# and Visual Basic, which were supported in earlier versions of Visual Studio. Visual Studio 2010 includes over 200 snippets that help you auto-complete common ASP.NET and HTML tags, including required attributes (such as runat="server") and common attributes specific to a tag (such as ID, DataSourceID, ControlToValidate, and Text). You can download additional snippets, or you can write your own snippets that encapsulate the blocks of markup that you or your team use for common tasks. For more information on HTML snippets, see Walkthrough: Using HTML Snippets. JScript IntelliSense Enhancements In Visual 2010, JScript IntelliSense has been redesigned to provide an even richer editing experience. IntelliSense now recognizes objects that have been dynamically generated by methods such as registerNamespace and by similar techniques used by other JavaScript frameworks. Performance has been improved to analyze large libraries of script and to display IntelliSense with little or no processing delay. Compatibility has been significantly increased to support almost all third-party libraries and to support diverse coding styles. Documentation comments are now parsed as you type and are immediately leveraged by IntelliSense. Web Application Deployment with Visual Studio 2010 For Web application projects, Visual Studio now provides tools that work with the IIS Web Deployment Tool (Web Deploy) to automate many processes that had to be done manually in earlier versions of ASP.NET. For example, the following tasks can now be automated: Creating an IIS application on the destination computer and configuring IIS settings. Copying files to the destination computer. Changing Web.config settings that must be different in the destination environment. Propagating changes to data or data structures in SQL Server databases that are used by the Web application. For more information about Web application deployment, see ASP.NET Deployment Content Map. Enhancements to ASP.NET Multi-Targeting ASP.NET 4 adds new features to the multi-targeting feature to make it easier to work with projects that target earlier versions of the .NET Framework. Multi-targeting was introduced in ASP.NET 3.5 to enable you to use the latest version of Visual Studio without having to upgrade existing Web sites or Web services to the latest version of the .NET Framework. In Visual Studio 2008, when you work with a project targeted for an earlier version of the .NET Framework, most features of the development environment adapt to the targeted version. However, IntelliSense displays language features that are available in the current version, and property windows display properties available in the current version. In Visual Studio 2010, only language features and properties available in the targeted version of the .NET Framework are shown. For more information about multi-targeting, see the following topics: .NET Framework Multi-Targeting for ASP.NET Web Projects ASP.NET Side-by-Side Execution Overview How to: Host Web Applications That Use Different Versions of the .NET Framework on the Same Server How to: Deploy Web Site Projects Targeted for Earlier Versions of the .NET Framework

Read the article

UPDATE FOR BI PUBLISHER ENTERPRISE 10.1.3.4.1 MARCH 2010

- by Tim Dexter

Latest roll up patch for 10.1.3.4.1 is now out in the wild. Yep, there are bug fixes but the guys have implemented some great enhancements. I'll be covering some of them over the coming weeks, from collapsing bookmarks in your PDFs to better MS AD support to 'true' Excel templates, yes you read that correctly! Patch is available from Oracle's support site. Just search for patch 9546699. Here's the contents and readme, apologies for the big list but at least you can search against it for a particular fix. This patch contains backports of following bugs for BI Publisher Enterprise 10.1.3.4.0 and 10.1.3.4.1. 6193342 - REG:SAMPLE DATA FILE FOR PDF FORM MAPPING IS NOT VALIDATED 6261875 - ERRONEOUS PRECISION VALIDATION ON ONLINE ANALYZER 6439437 - NULL POINTER EXCEPTION WHEN PROCESSING TABLE OF CONTENT 6460974 - BACS EFT PAYMENT INSTRUCTION OUTPUT FILE IS EMPTY 6939721 - BIP: REPORT BUSTING DELIVERY KEY VALUES CANNOT CONTAIN SEVERAL SPECIAL CHARACTER 6996069 - USING XML DB FOR BI REPOSITORY FAILS WITH RESOURCENOTFOUNDEXCEPTION 7207434 - TIMEZONE:SHOULD NOT DO TIMEZONE CONVERSION AGAINST CANONICAL DATE YYYY-MM-DD 7371531 - SUPPORT FOR CSV OUTPUT FOR STRUCTURED XML AND NON SQL DATA SOURCES 7596148 - ER: LDAP FOR MS AD TO SEARCH FROM AD ROOT 7646139 - WEBSERVICES ERROR 7829516 - BIP STANDALONE FAILS TO BURST USING XSL-FO TEMPLATES 8219848 - PDF TEMPLATE REPORT NOT PERFORMING PAGE BREAK 8232116 - PARAMETER VALUE IS PASSED AS NULL,IF IT CONTAINS 'AND' WITHIN THE STRING 8250690 - NOT ABLE TO UPLOAD TEMPLATE VIA BIP API 8288459 - ER: QUERY BUILDER OPTION TO NOT INCLUDE TABLENAME. PREFIX IN SQL 8289600 - REPORT TITLE AND DESCRIPTION CAN'T SUPPORT MULTIPLE LANGUAGES 8327080 - CAN NOT CONFIGURE ORACLE EBUSINESS SUITE SECURITY MODEL WITH ORACLE RAC 8332164 - AN XDO PROPERTY TO ENABLE DEBUG LOGGING 8333289 - WEB SERVICE JOBS FAIL AFTER BIP STARTED UP 8340239 - HTTP NOTIFY IS MISSING IN SCHEDULEREPORTREQUEST 8360933 - UNABLE TO USE LOGGED IN BI USER AS THE WSSECURITY USERNAME IN A VARIABLE FORMAT 8400744 - ADMINISTRATOR USER DOES NOT HAVE FULL ADMINISTRATOR RIGHTS 8402436 - CRASH CAUSED BY UNDETERMINED ATTRKEY ERROR IN MULTI-THREADED 8403779 - IMPOSSIBLE TO CONFIGURE PARAMETER FOR A REPORT 8412259 - PDF, RTF OUTPUT NOT HANDLING THE TABLE BORDER AND CONTENT OVERFLOWS TO NEXT PAGE 8483919 - DYNAMIC DATASOURCE WEBSERVICE SHOULD WORK WITH SERVERSIDE CONNECTIONS 8444382 - ID ATTRIBUTE IN TITLE-PAGE DOES NOT WORK WITH SELECTACTION PROPERTY 8446681 - UI LANGUAGE IS NOT REFLECTED AT THE FIRST LOG IN 8449884 - PUBLICREPORTSERVICE FAILS ON EMAIL DELIVERY USING BIP 10.1.3.4.0D+ - NPE 8454858 - DB: XMLP_ADMIN CAN SEE ALL THE FOLDERS BUT ONLY HAS VIEW PERMISSIONS 8458818 - PDFBOOKBINDER FAILS WITH OUTOFMEMORY ERROR WHEN TRYING TO BIND > 1500 PDFS 8463992 - INCORRECT IMPLEMENTATION OF XLIFF SPECIFICATION 8468777 - BI PUBLISHER QUERY BUILDER NOT LOADING SCHEMA OBJECTS 8477310 - QUERY BUILDER NOT WORK WITH SSL ON STANDALONE OC4J 8506701 - POSITIVE PAY FILE WITH OPTIONS NOT CREATING FILE CHECKS OVER 2500 8506761 - PERFORMANCE: PDFBOOKBINDER CLASS TAKES 4 HOURS TO BIND 4000 PAGES 8535604 - NPE WHEN CLICKING "ANALYZER FOR EXCEL" BUTTON IN ALL_* REPORTS 8536246 - REMOVE-PDF-FIELDS DOES NOT WORK WITH CHECKBOXES WITH OPT ARRAY 8541792 - NULLPOINTER EXCEPTION WHILE USING SFTP PROTOCOL 8554443 - LOGGING TIME STAMP IN 10G: THE HOUR PART IS WRONG 8558007 - UNABLE TO LOGIN BIP WITH UNPRIVILEGED USER WHEN XDB IS USED FOR REPORSITORY STOR 8565758 - NEED TO CONNECT IMPERSONATION TO DATA SOURCE WITH PL/SQL FUNCTION 8567235 - EFTPROCESSOR AND XDO DEBUG ENABLED CAUSES ORG.XML.SAX.SAXPARSEEXCEPTION 8572216 - EFTPROCESSOR NOT THREAD SAFE - CAUSING CORRUPTED REPORTS TO BE GENERATED 8575776 - LANDSCAPE REPORT ORIENTAION NOT SELECTED WHEN REPORT IS PRINTED WITH PS 8588330 - XLIFF GENERATING WITH WRONG MAXWIDTH ATTRIBUTE IN SOME TRANS-UNITS 8584446 - EFTGENERATOR DOES NOT USE XSLT SCALABILITY - JAVA.LANG.OUTOFMEMORY EXCEPTION 8594954 - ENG: BIP NOTIFY MESSAGE BECOMES ENGLISH 8599646 - ER:EXTRA SPACE ADDED BELOW IMAGE IN A TABLE CELL OF TEMPLATE IN FIREFOX 8605110 - PDFSIGNATURE API ENCOUNTERS JAVA.LANG.NULLPOINTEREXCEPTION ON PDF WITH WATERMARK 8660915 - BURSTING WITH DATA TEMPLATE NOT WORKING WITH OPTION: VALUE=FALSE 8660920 - ER: EXTRACT XHTML DATA USING XDODTEXE IN XHTML FORMAT 8667150 - PROBLEM WITH 3RD APPLICATION ABOUT PDF GENERATED WITH BI PUBLISHER 8683547 - "CLICK VIEW REPORT BUTTON TO GENERATE THE REPORT" MESSAGE IS DISPLAYED 8713080 - SEARCH" PARAMETER IS NOT SHOWING NON ENGLISH DATA IN INTERNET EXPLORER 8724778 - EXCEL ANALYZER PARAMETERS DO NOT WORK WITH EXCEL 2007 8725450 - UIX 2.3.6.6 UPTAKE FOR 10.1.3.4.1 8728807 - DYNAMIC JDBC DATA SOURCE WITH PRE-PROCESS FUNCTION BASED ON EXISTING DATA SOURCE 8759558 - XDO TEMPLATE SHOWS CURRENCY IN WRONG FORMAT FOR DUNNING 8792894 - EFTPROCESSOR DOES NOT SUPPORT XSL TEMPLATE AS INPUTSTREAM 8793550 - BIP GENERATES CSV REPORTS OUTPUT FORMAT WITH EXTENTION .OUT NOT .CSV IN EMAIL 8819869 - PERIOD CLOSE VALUE SUMMARY REPORT (XML) RUNNING INTO WARNING 8825732 - MY FOLDERS LINK BROKEN WITH USER NAME THAT INCLUDES A SLASH (/) OBIEE SECURITY 8831948 - TRYING TO GENERATE A SCATTER PLOT USING THE CHART WIZARD 8842299 - SEEDED QUERY ALWAYS RETURNS RESULTS BASED ON FIRST COLUMN 8858027 - NODE.GETTEXTCONTEXT() NOT AVAILABLE IN 10G UNDER OC4J 8859957 - REPORT TITLE ALIGNMENT GOES BAD FOR REPORTS WITH XLIFF FILE ATTACHED 8860957 - ER: IMPROVE PERFORMANCE OF ANSWERS PARAMETERS 8891537 - GETREPORTPARAMETERS WEB SERVICE API ISSUES WITH OAAM REPORTS 8891558 - GETTING SQLEXCEPTION IN GENERATEREPORT WEB SERVICE API ON OAAM REPORTS 8927796 - ER: DYANAMIC DATA SOURCE SUPPORT BY DATA SOURCE NAME 8969898 - BI PUBLISHER WEB SERVICE GETREPORTPARAMETERS DOES NOT TRANSLATE PARAMETER LABEL 8998967 - MULTIPLE XSL PREDICATES ELEMENT[A='A'] [B='B'] CAUSES XML-22019 ERROR 9012511 - SCALABLE MODE IS NOT WORKING IN XMLPUBLISHER 10.1.3.4 9016976 - ER: PRINT XSL-T AND FOPROCESSING TIMING INFORMATION 9018580 - WEB SERVICE CALL FAILS WHEN REPORT INCLUDES SEARCH TYPE 9018657 - JOB FAILS WHEN LOV QUERY CONTAINS BIND VARIABLES :XDO_USER_UI_LOCALE 9021224 - PERFORMANCE ISSUE TO VIEW DASHBOARD PAGE WITH BIP REPORT LINKS 9022440 - ER: SUPPORT "COMB OF N CHARACTERS" FEATURE PDF FORM TEXT FIELDS 9026236 - XPATH DOES NOT WORK CORRECTLY IN 10.1.3.4.1 9051652 - FILE EXTENSION OF CSV OUTPUT IS TXT WHEN IT IS EXPORTED FROM REPORT VIEWER 9053770 - WHEN SENDING CSV REPORT OUTPUT BY EMAIL SOMETIMES IT IS SENT WITHOUT EXTENSION 9066483 - PDFBOOKBINDER LEAVE SOME TEMPORARY FILES AFTER MERGING TITLE PAGE OR TOC 9102420 - USE RELATIVE PATHS IN HYPERLINKS 9127185 - CHECKBOX NOT WORK ON SUB TEMPLATE 9149679 - BASE URL IS NOT PASSED CORRECTLY 9149691 - PROVIDE A WAY TO DISABLE THE ABILITY TO CREATE SCHEDULED REPORT JOB "PUBLIC" 9167822 - NOTIFICATION URL BREAKS ON FOLDER NAMES WITH SPACES 9167913 - CHARTS ARE MISSING IN PDF OUTPUTS WHEN THE DEFAULT OUTPUT FORMAT IS NOT A PDF 9217965 - REPORT HISTORY TAKES LONG TIME TO RENDER THE PAGE 9236674 - BI PUBLISHER PARAMETERS DO NOT CASCADE REFRESH AFTER SECOND PARAMETER 9283933 - OPTION TO COLLAPSE PDF OUTPUT BOOKMARKS BY DEFAULT 9287245 - SAVE COMPLETED SCHEDULED REPORTS IN ITS REPORT NAME AND NOT IN A GENERIC NAME 9348862 - ADD FEATURE TO DISABLE THE XSLT1.0-COMPATIBILITY IN RTF TEMPLATE 9355897 - ER: NEED A SAFE DIVIDE FUNCTION 9364169 - UIX 2.3.6.6 PATCH UPTAKE FOR 10.1.3.4.1 9365153 - LEADING WHITESPACE CHARACTERS IN A FIELD TRIMMED WHEN RUN VIEW OR EXPORT TO .CSV 9389039 - LONG TEXT IS NOT WRAPPED PROPERLY IN THE AUTOSHAPE ON RTF TEMPLATE 9475697 - ENH: SUB-TEMPLATE:DYNAMIC VARIABLE WITH PARAMETER VALUE IN CALL-TEMPLATE CLAUSE 9484549 - CHANGE DEFAULT FOR "XSLT1.0-COMPATIBILITY" TO FALSE FOR 10G 9508499 - UNABLE TO READ EXCEL FILE IF MORE THAN 1800 ROWS GENERATED 9546078 - EMAIL DELIVERY INFORMATION SHOULD NOT BE SAVED AND AUTO-FED IN JOB SUBMISSION 9546101 - EXCEPTION OCCURS WHEN SFTP/FTP REMOTE FILENAME DOSE NOT CONTAIN A SLASH '/' 9546117 - SFTP REPORT DELIVERY FAILS WITH NO CLASS DEF FOUND EXCEPTION ON WEBLOGIC 9.2 Following bugs are included in 10.1.3.4.1 and they are only applied to 10.1.3.4.0. 4612604 - FROM EDGE ATTRIBUTE OF HEADER AND FOOTER IS NOT PRESERVED 6621006 - PARAMNAMEVALUE ELEMENT DEFINITION SHOULD HAVE PARAMETER TYPE 6811967 - DATE PARAMETER NOT HANDLING DATE OFFSET WHEN PASSED UPPERCASE Z FOR OFFSET 6864451 - WHEN BIP REPORTS TIMEOUT, THE PROCESS TO LOG BACK IN IS NOT USER FRIENDLY 6869887 - FUSION CURRENCY BRD:4.1.4/4.1.6 OVERRIDINDG MASK /W XSLT._XDOCURMASKS /W SYMBOL 6959078 - "TEXT FIELD CONTAINS COMMA-SEPARATED VALUES" DOESN'T WORK IN CASE OF STRING 6994647 - GETTING ERROR MESSAGE SAYING JOB FAILED EVEN THOUGH WORKS OK IN BI PUBLISHER 7133143 - ENABLE USER TO ENTER 'TODAY' AS VALUE TO DATE PARAMETER IN SCHEDULE REPORT UI 7165117 - QA_BIP_FUNC:-CLOSED LIFE TIME REPORT ERROR MESSAGE IN CMD 7167068 - LEADER-LENGTH OR RULE-THICKNESS PROPRTY IS TOO LARGE 7219517 - NEED EXTENSION FUNCTIONS TO URL ENCODE TEXT STRING. 7269228 - TEMPLATEHELPER PRODUCES A GARBLED OUTPUT WHEN INVOKED BY MULTIPLE THREADS 7276813 - GETREPORTPARAMETERSRETURN ELEMENT SHOULD HAVE DEFAULT VALUE 7279046 - SCHDEULER:UNABLE TO DELETE A JOB USING API 7280336 - ER: BI PUBLISHER - SITEMINDER SUPPORT - GENERIC NON-ORACLE SSO SUPPORT 7281468 - MODIFY SQL SERVER PROPERTIES TO USE HYP DATA DIRECT IN JDBCDEFAULTS.XML 7281495 - PLEASE ADD SUPPORTED DBS TO JDBCDEFAULT.XML AND LIST EACH DB VERSION SEPARATELY 7282456 - FUSION CURRENCY BRD 4.1.9.2: CURRENCY AMOUTS SHOULD NOT BE WRAPPED. MINUS SIGN 7282507 - FUSION CURRENCY BRD4.1.2.5:DISPLAY CURRENCY AND LOCALE DERIVED CURRENCY SYMBOL 7284780 - FUSION CURRENCY BRD 4.1.12.4 CORRECTLY ALIGN NEGATIVE CURRENCY AMOUNTS 7306874 - OPP ERROR - JAVA.LANG.OUTOFMEMORYERROR: ZIP002:OUTOFMEMORYERROR, MEM_ERROR 7309596 - SIEBELCRM: BIP ENHANCEMENT REQUEST FOR SIEBEL PARAMETERIZATION 7337173 - UI LOCALE IS ALWAYS REWRITTEN TO EN WHEN MOVE FROM DASHBOARD 7338349 - REG:ANALYZER REPORT WITH AVERAGE FUNCTION FAIL TO RUN FOR NON INTERACTIVE FORMAT 7343757 - OUTPUT FORMAT OF TEMPLATES IS NOT SAVING 7345989 - SET XDK REPLACEILLEGALCHARS AND ENHANCE XSLTWRAPPER WARNING 7354775 - UNEXPECTED BEHAVIOR OF LAYOUT TEMPLATE PARAMETER OF RUNREPORT WEBSERVICES API 7354798 - SEQUENCE ORDER OF PARAMETERS FOR THE RUNREPORT WEBSERVICES API 7358973 - PARALLEL SFTP DELIVERY FAILS DUE TO SSHEXCEPTION: CORRUPT MAC ON INPUT 7370110 - REGN:FAIL WHEN USE JNDI TO XMLDB REPORT REPOSITORY 7375859 - NEW WEBSERVICE REQUIRED FOR RUNREPORT 7375892 - REQUIRE NEW WEBSERVICE TO CHECK IF REPORTFOLDER EXISTS 7377686 - TEXT-ALIGN NOT APPLIED IN PDF IN HEBREW LOCALE 7413722 - RUNREPORT API DOES NOT PASS BACK ANY GENERATED EXCEPTIONS TO SCHEDULEREPORT 7435420 - FUSION CURRENCY: SUPPORT MICROSOFT(JAVA) FORMAT MASK WITH CURRENCY 7441486 - ER: ADD PARAMETER FOR SFTP TO BURSTING QUERY 7458169 - SSO WITH OID LDAP COULD NOT FETCH OID ROLES 7461161 - EMAIL DELIVERY FAILS - DELIVERYEXCEPTION: 0 BYTE AVAILABLE IN THE GIVEN INPU 7580715 - INCORRECT FORMATTING OF DATES IN TIMEZONE GMT+13 7582694 - INVALID MAXWIDTH VALUE CAUSES NLS FAILURES 7583693 - JAVA.LANG.NULLPOINTEREXCEPTION RAISED WHEN GENERATING HRMS BENEFITS PDF REPORT 7587998 - NEWLY CREATED USERS IN OID CANT ACCESS REPORTS UNTILL BI PUBLISHER IS RESTARTED 7588317 - TABLE OF CONTENT ALWAYS IN THE SAME FONT 7590084 - REMOVING THE BIP ENTERPRISE BANNER BUT KEEPING THE REPORTS & SCHEDULES TAB 7590112 - SOMEONE NOT PRIVILEGED ACCESS BIP DIRECTLY SHOULD GET A CUSTOM PAGE 7590125 - AUTOMATING CREATION OF USERS AND ROLES 7597902 - TIMEZONE SUPPORT IN RUNREPORT WEBSERVICE API 7599031 - XML PUBLISHER SUM(CURRENT-GROUP()) FAILS 7609178 - ISSUE WITH TAGS EXTRACTED FROM RTF TEMPLATE 7613024 - HEADER/FOOTER SETTINGS OF RTF TEMPLATE ARE NOT RETAINING IN THE RTF OUTPUT 7623988 - ADD XSLT FUNCTION TO PRINT XDO PROPERTIES 7625975 - RETRIEVING PARAMETER LOV FROM RTF TEMPLATE 7629445 - SPELL OUT A NUMBER INTO WORDS 7641827 - ANALYTICS FROZED AFTER PAGE TAB WHICH INCLUDES [BI PUBLISHER REPORT] WERE CLICKE 7645504 - BIP REPORT FROZED AFTER THE SAME DASHBOARD BIP REPORTS WERE CLICKED SIMULTANEOUS 7649561 - RECEIVE 'TO MANY OPEN FILE HANDLES' ERROR CAUSING BI TO CRASH 7654155 - BIP REMOVES THE FIRST FILE SEPARATOR WHEN RE-ENTER REPOSITORY LOCATION IN ADMIN 7656834 - NEED AN OPTION TO NOT APPEND SCHEMA NAME IN GENERATED QUERY 7660292 - ER: XDOPARSER UPGRADE TO XDK 11G 7687862 - BIP DATA EXTRACTING ENHANCEMENT FOR SIEBEL BIP INTEGRATION 7694875 - ADMINISTRATOR IS SUPER USER WHETHER CONFIGURED MANDATORY_USER_ROLE OR NOT 7697592 - BI PUBLISHER STRINGINDEXOUTOFBOUNDSEXCEPTION WHEN PRINTING LABEL FROM SIM 7702372 - ARABIC/ENGLISH NUMBER/DATE PROBLEM, TOTAL PAGE NUMBER NOT RENDERED IN ENGLISH 7707987 - OUTOFMEMORY BURSTING A BI PUBLISHER REPORT BI SERVER DATA SOURCE 7712026 - ER: CHANGE CHART OUTPUT FORMAT TO PNG IN HTML OUTPUT 7833732 - THE 'SEARCH' PARAMETER TYPE CANNOT BE USED IN IE6 UNDER WINDOWS 8214839 - ER: INCREASE COLUMN SIZE IN SCHEDULER TABLE XMLP_SCHED_JOB 8218271 - ISSUES WHILE CONVERTING EXCEL TO XML 8218452 - BI PUBLISHER STANDALONE : GRAPHICS WITHOUT COLORS IF MORE THAN 33 PAGES 8250980 - USER WITH XMLP_ADMIN RESPONSIBILITY IS NOT ABLE TO EDIT REPORT IN BIP 8262410 - IMPOSSIBLE TO PRINT PDF CREATED BY BI PUBLISHER VIA 3RD PARTY PDF APPLICATION 8274369 - QA: CANNOT DELETE EMAIL SERVER UNDER DELIVERY CONFIGURATION 8284173 - FO:VISIBILITY="HIDDEN" DOESN'T WORK WITH FO:PAGE-NUMBER-CITATION 8288421 - THE VALUE OF VIEW BY GO BACK TO MY HISTORY IN SCHEDULES TAB 8299212 - REG: THE SPECIFICAL BI USER DIDN'T GET THE CORRECT REPORT HISTORY 8301767 - ORA-01795 ERROR OCCURED AFTER ACCESSING DASHBOARD PAGE WHICH INCLUDES BIP 8304944 - ADD SIEBEL SECURITY MODEL IN BI PUBLISHER 10.1.3.4.1 8312814 - QA:HOT:OBI SERVER JDBC DRIVER BIJDBC14.JAR IN XMLPSERVER.WAR IS INCORRECT 8323679 - BI PUBLISHER SENDS HTML REPORT TO OUTLOOK CLIENT AS ATTACHMENT NOT INLINE 8370794 - HISTORY OF COMPLETED SCHEDULER JOBS STILL SHOW ONE AS RUNNING ON CLUSTER ENV 8390970 - OUT OF MEMORY EXCEPTION RAISED, WHILE SAVING THE DATA 8393681 - CHECKBOX IS SHOWING UP AS CHECKED WHEN DATA IS NOT CHECKED VALUE 8725450 - UIX 2.3.6.6 UPTAKE FOR 10.1.3.4.1 UIX fixes: 6866363 - SUPPORT FOR JAVA DATE FORMAT AS PER JDK 1.4 AND ABOVE 6829124 - DATE PARAMETER NOT HANDLING DATE OFFSET AS PER JAVA STANDARDS ---------------------------- INSTALLATION FOR ENTERPRISE ---------------------------- Upgrade from 10.1.3.4.0d (patch 8284524, 8398280) and 10.1.3.4.1 does not require step 8 and step 9. 1 - Make a backup copy of the xmlp-server-config.xml file located in <application installation>/WEB-INF/ directory, where your application server unpacked the BI Publisher war or ear file. Example: In an Oracle AS/OC4J 10.1.3 deployment, the location is <ORACLE_HOME>/j2ee/home/applications/xmlpserver/xmlpserver/WEB-INF/xmlp-server-config.xml 2 - Back up all the directories under the BI Publisher repository (for example: {Oracle_Home}/xmlp/XMLP). 3 - If you are using Scheduling, back up your existing BI Publisher Scheduler schema. 4 - Shut down BI Publisher. 5 - Undeploy the BI Publisher application ("xmlpserver") from your J2EE application server. See your application server documentation for instructions how to undeploy an application. 6 - Deploy the 10.1.3.4 xmlpserver.ear or xmlpserver.war to your application server. See "Manually Installing BI Publisher to Your J2EE Application Server" secition of BI Publisher Installation Guide for guidelines for your application server type. 7 - Copy the saved backup copy of the xmlp-server-config.xml file from step 1 to the newly created BI Publisher <application installation>/WEB-INF/ directory, where your application server unpacked the BI Publisher war or ear file. Example: In an Oracle AS/OC4J 10.1.3 deployment, the location is <ORACLE_HOME>/j2ee/home/applications/xmlpserver/xmlpserver/WEB-INF/xmlp-server-config.xml 8 - Copy ssodefaults.xml to the following directory. And replace [host]:[port] with your server's information. Default values for other properties can be updated depending on your configuration. <Existing Repository>\XMLP\Admin\Security 9 - Copy database-config.xml to the following directory. <Existing Repository>\XMLP\Admin\Scheduler 10 - Restart xmlpserver application or Application Server ---------------------------------- IBM WEBSPHERE 6.1 DEPLOYMENT NOTE ---------------------------------- When users fail to log on to BI Publisher with "HTTP 500 Internal Server Error" on WebSphere 6.1, you must change Class Loader configuration to avoid the error. (bug7506253 - XMLPSERVER WON'T START AFTER DEPLOYMENT TO WEBSPHERE 6.1) SystemErr.log: java.lang.VerifyError: class loading constraint violated (class: oracle/xml/parser/v2/XMLNode method: xdkSetQxName(Loracle/xml/util/QxName;)V) at pc: 0 .... Class Loader Configuration Steps: 1 - Login to WebSphere Admin console. Click Enterprise Applications under Applications menu 2 - Click xmlpserver application name from the list 3 - Select "Class loading and update detection" 4 - Update class loader configuration as follows in Class Loader -> General Properties * Polling interval for updated files: [0] Seconds * Class loader order: [x] Classes loaded with application class loader first * WAR class loader policy: [x] Single class loader for application 5 - Apply this change and save the new configuration. 6 - Restart xmlpserver application Please refer to WebSphere 6.1 documentation for more details. "http://publib.boulder.ibm.com/infocenter/wasinfo/v6r1/index.jsp?topic=/com.ibm.websphere.base.doc/info/aes/ae/trun_classload_entapp.html"> http://publib.boulder.ibm.com/infocenter/wasinfo/v6r1/index.jsp?topic=/com.ibm.websphere.base.doc/info/aes/ae/trun_classload_entapp.html ------------------------------------------------------- Oracle WebLogic Server 11g R1 (10.3.1) Deployment NOTE ------------------------------------------------------- If you are deploying BI Publisher to WebLogic Server 10.3.1, you must add the following setting at startup for the domain that contains the BI Publisher server in the /weblogic_home/user_projects/domains/base_domain/bin/startWebLogic.sh script : -Dtoplink.xml.platform=oracle.toplink.platform.xml.jaxp.JAXPPlatform This setting is required to enable BI Publisher to find the TopLink JAR files to create the Scheduler tables.

Read the article

URL Rewrite – Multiple domains under one site. Part II

- by OWScott

I believe I have it … I’ve been meaning to put together the ultimate outgoing rule for hosting multiple domains under one site. I finally sat down this week and setup a few test cases, and created one rule to rule them all. In Part I of this two part series, I covered the incoming rule necessary to host a site in a subfolder of a website, while making it appear as if it’s in the root of the site. Part II won’t work without applying Part I first, so if you haven’t read it, I encourage you to read it now. However, the incoming rule by itself doesn’t address everything. Here’s the problem … Let’s say that we host www.site2.com in a subfolder called site2, off of masterdomain.com. This is the same example I used in Part I. Using an incoming rewrite rule, we are able to make a request to www.site2.com even though the site is really in the /site2 folder. The gotcha comes with any type of path that ASP.NET generates (I’m sure other scripting technologies could do the same too). ASP.NET thinks that the path to the root of the site is /site2, but the URL is /. See the issue? If ASP.NET generates a path or a redirect for us, it will always add /site2 to the URL. That results in a path that looks something like www.site2.com/site2. In Part I, I mentioned that you should add a condition where “{PATH_INFO} ‘does not match’ /site2”. That allows www.site2.com/site2 and www.site2.com to both function the same. This allows the site to always work, but if you want to hide /site2 in the URL, you need to take it one step further. One way to address this is in your code. Ultimately this is the best bet. Ruslan Yakushev has a great article on a few considerations that you can address in code. I recommend giving that serious consideration. Additionally, if you have upgraded to ASP.NET 3.5 SP1 or greater, it takes care of some of the references automatically for you. However, what if you inherit an existing application? Or you can’t easily go through your existing site and make the code changes? If this applies to you, read on. That’s where URL Rewrite 2.0 comes in. With URL Rewrite 2.0, you can create an outgoing rule that will remove the /site2 before the page is sent back to the user. This means that you can take an existing application, host it in a subfolder of your site, and ensure that the URL never reveals that it’s in a subfolder. Performance Considerations Performance overhead is something to be mindful of. These outbound rules aren’t simply changing the server variables. The first rule I’ll cover below needs to parse the HTML body and pull out the path (i.e. /site2) on the way through. This will add overhead, possibly significant if you have large pages and a busy site. In other words, your mileage may vary and you may need to test to see the impact that these rules have. Don’t worry too much though. For many sites, the performance impact is negligible. So, how do we do it? Creating the Outgoing Rule There are really two things to keep in mind. First, ASP.NET applications frequently generate a URL that adds the /site2 back into the URL. In addition to URLs, they can be in form elements, img elements and the like. The goal is to find all of those situations and rewrite it on the way out. Let’s call this the ‘URL problem’. Second, and similarly, ASP.NET can send a LOCATION redirect that causes a redirect back to another page. Again, ASP.NET isn’t aware of the different URL and it will add the /site2 to the redirect. Form Authentication is a good example on when this occurs. Try to password protect a site running from a subfolder using forms auth and you’ll quickly find that the URL becomes www.site2.com/site2 again. Let’s term this the ‘redirect problem’. Solving the URL Problem – Outgoing Rule #1 Let’s create a rule that removes the /site2 from any URL. We want to remove it from relative URLs like /site2/something, or absolute URLs like http://www.site2.com/site2/something. Most URLs that ASP.NET creates will be relative URLs, but I figure that there may be some applications that piece together a full URL, so we might as well expect that situation. Let’s get started. First, create a new outbound rule. You can create the rule within the /site2 folder which will reduce the performance impact of the rule. Just a reminder that incoming rules for this situation won’t work in a subfolder … but outgoing rules will. Give it a name that makes sense to you, for example “Outgoing – URL paths”. Precondition. If you place the rule in the subfolder, it will only run for that site and folder, so there isn’t need for a precondition. Run it for all requests. If you place it in the root of the site, you may want to create a precondition for HTTP_HOST = ^(www\.)?site2\.com$. For the Match section, there are a few things to consider. For performance reasons, it’s best to match the least amount of elements that you need to accomplish the task. For my test cases, I just needed to rewrite the <a /> tag, but you may need to rewrite any number of HTML elements. Note that as long as you have the exclude /site2 rule in your incoming rule as I described in Part I, some elements that don’t show their URL—like your images—will work without removing the /site2 from them. That reduces the processing needed for this rule. Leave the “matching scope” at “Response” and choose the elements that you want to change. Set the pattern to “^(?:site2|(.*//[_a-zA-Z0-9-\.]*)?/site2)(.*)”. Make sure to replace ‘site2’ with your subfolder name in both places. Yes, I realize this is a pretty messy looking rule, but it handles a few situations. This rule will handle the following situations correctly: Original Rewritten using {R:1}{R:2} http://www.site2.com/site2/default.aspx http://www.site2.com/default.aspx http://www.site2.com/folder1/site2/default.aspx Won’t rewrite since it’s a sub-sub folder /site2/default.aspx /default.aspx site2/default.aspx /default.aspx /folder1/site2/default.aspx Won’t rewrite since it’s a sub-sub folder. For the conditions section, you can leave that be. Finally, for the rule, set the Action Type to “Rewrite” and set the Value to “{R:1}{R:2}”. The {R:1} and {R:2} are back references to the sections within parentheses. In other words, in http://domain.com/site2/something, {R:1} will be http://domain.com and {R:2} will be /something. If you view your rule from your web.config file (or applicationHost.config if it’s a global rule), it should look like this: <rule name="Outgoing - URL paths" enabled="true"> <match filterByTags="A" pattern="^(?:site2|(.*//[_a-zA-Z0-9-\.]*)?/site2)(.*)" /> <action type="Rewrite" value="{R:1}{R:2}" /> </rule> Solving the Redirect Problem Outgoing Rule #2 The second issue that we can run into is with a client-side redirect. This is triggered by a LOCATION response header that is sent to the client. Forms authentication is a common example. To reproduce this, password protect your subfolder and watch how it redirects and adds the subfolder path back in. Notice in my test case the extra paths: http://site2.com/site2/login.aspx?ReturnUrl=%2fsite2%2fdefault.aspx I want to remove /site2 from both the URL and the ReturnUrl querystring value. For semi-readability, let’s do this in 2 separate rules, one for the URL and one for the querystring. Create a second rule. As with the previous rule, it can be created in the /site2 subfolder. In the URL Rewrite wizard, select Outbound rules –> “Blank Rule”. Fill in the following information: Name response_location URL Precondition Don’t set Match: Matching Scope Server Variable Match: Variable Name RESPONSE_LOCATION Match: Pattern ^(?:site2|(.*//[_a-zA-Z0-9-\.]*)?/site2)(.*) Conditions Don’t set Action Type Rewrite Action Properties {R:1}{R:2} It should end up like so: <rule name="response_location URL"> <match serverVariable="RESPONSE_LOCATION" pattern="^(?:site2|(.*//[_a-zA-Z0-9-\.]*)?/site2)(.*)" /> <action type="Rewrite" value="{R:1}{R:2}" /> </rule> Outgoing Rule #3 Outgoing Rule #2 only takes care of the URL path, and not the querystring path. Let’s create one final rule to take care of the path in the querystring to ensure that ReturnUrl=%2fsite2%2fdefault.aspx gets rewritten to ReturnUrl=%2fdefault.aspx. The %2f is the HTML encoding for forward slash (/). Create a rule like the previous one, but with the following settings: Name response_location querystring Precondition Don’t set Match: Matching Scope Server Variable Match: Variable Name RESPONSE_LOCATION Match: Pattern (.*)%2fsite2(.*) Conditions Don’t set Action Type Rewrite Action Properties {R:1}{R:2} The config should look like this: <rule name="response_location querystring"> <match serverVariable="RESPONSE_LOCATION" pattern="(.*)%2fsite2(.*)" /> <action type="Rewrite" value="{R:1}{R:2}" /> </rule> It’s possible to squeeze the last two rules into one, but it gets kind of confusing so I felt that it’s better to show it as two separate rules. Summary With the rules covered in these two parts, we’re able to have a site in a subfolder and make it appear as if it’s in the root of the site. Not only that, we can overcome automatic redirecting that is caused by ASP.NET, other scripting technologies, and especially existing applications. Following is an example of the incoming and outgoing rules necessary for a site called www.site2.com hosted in a subfolder called /site2. Remember that the outgoing rules can be placed in the /site2 folder instead of the in the root of the site. <rewrite> <rules> <rule name="site2.com in a subfolder" enabled="true" stopProcessing="true"> <match url=".*" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{HTTP_HOST}" pattern="^(www\.)?site2\.com$" /> <add input="{PATH_INFO}" pattern="^/site2($|/)" negate="true" /> </conditions> <action type="Rewrite" url="/site2/{R:0}" /> </rule> </rules> <outboundRules> <rule name="Outgoing - URL paths" enabled="true"> <match filterByTags="A" pattern="^(?:site2|(.*//[_a-zA-Z0-9-\.]*)?/site2)(.*)" /> <action type="Rewrite" value="{R:1}{R:2}" /> </rule> <rule name="response_location URL"> <match serverVariable="RESPONSE_LOCATION" pattern="^(?:site2|(.*//[_a-zA-Z0-9-\.]*)?/site2)(.*)" /> <action type="Rewrite" value="{R:1}{R:2}" /> </rule> <rule name="response_location querystring"> <match serverVariable="RESPONSE_LOCATION" pattern="(.*)%2fsite2(.*)" /> <action type="Rewrite" value="{R:1}{R:2}" /> </rule> </outboundRules> </rewrite> If you run into any situations that aren’t caught by these rules, please let me know so I can update this to be as complete as possible. Happy URL Rewriting!

Read the article

Introduction to the ASP.NET Web API

- by Stephen.Walther

I am a huge fan of Ajax. If you want to create a great experience for the users of your website – regardless of whether you are building an ASP.NET MVC or an ASP.NET Web Forms site — then you need to use Ajax. Otherwise, you are just being cruel to your customers. We use Ajax extensively in several of the ASP.NET applications that my company, Superexpert.com, builds. We expose data from the server as JSON and use jQuery to retrieve and update that data from the browser. One challenge, when building an ASP.NET website, is deciding on which technology to use to expose JSON data from the server. For example, how do you expose a list of products from the server as JSON so you can retrieve the list of products with jQuery? You have a number of options (too many options) including ASMX Web services, WCF Web Services, ASHX Generic Handlers, WCF Data Services, and MVC controller actions. Fortunately, the world has just been simplified. With the release of ASP.NET 4 Beta, Microsoft has introduced a new technology for exposing JSON from the server named the ASP.NET Web API. You can use the ASP.NET Web API with both ASP.NET MVC and ASP.NET Web Forms applications. The goal of this blog post is to provide you with a brief overview of the features of the new ASP.NET Web API. You learn how to use the ASP.NET Web API to retrieve, insert, update, and delete database records with jQuery. We also discuss how you can perform form validation when using the Web API and use OData when using the Web API. Creating an ASP.NET Web API Controller The ASP.NET Web API exposes JSON data through a new type of controller called an API controller. You can add an API controller to an existing ASP.NET MVC 4 project through the standard Add Controller dialog box. Right-click your Controllers folder and select Add, Controller. In the dialog box, name your controller MovieController and select the Empty API controller template: A brand new API controller looks like this: using System; using System.Collections.Generic; using System.Linq; using System.Net.Http; using System.Web.Http; namespace MyWebAPIApp.Controllers { public class MovieController : ApiController { } } An API controller, unlike a standard MVC controller, derives from the base ApiController class instead of the base Controller class. Using jQuery to Retrieve, Insert, Update, and Delete Data Let’s create an Ajaxified Movie Database application. We’ll retrieve, insert, update, and delete movies using jQuery with the MovieController which we just created. Our Movie model class looks like this: namespace MyWebAPIApp.Models { public class Movie { public int Id { get; set; } public string Title { get; set; } public string Director { get; set; } } } Our application will consist of a single HTML page named Movies.html. We’ll place all of our jQuery code in the Movies.html page. Getting a Single Record with the ASP.NET Web API To support retrieving a single movie from the server, we need to add a Get method to our API controller: using System; using System.Collections.Generic; using System.Linq; using System.Net; using System.Net.Http; using System.Web.Http; using MyWebAPIApp.Models; namespace MyWebAPIApp.Controllers { public class MovieController : ApiController { public Movie GetMovie(int id) { // Return movie by id if (id == 1) { return new Movie { Id = 1, Title = "Star Wars", Director = "Lucas" }; } // Otherwise, movie was not found throw new HttpResponseException(HttpStatusCode.NotFound); } } } In the code above, the GetMovie() method accepts the Id of a movie. If the Id has the value 1 then the method returns the movie Star Wars. Otherwise, the method throws an exception and returns 404 Not Found HTTP status code. After building your project, you can invoke the MovieController.GetMovie() method by entering the following URL in your web browser address bar: http://localhost:[port]/api/movie/1 (You’ll need to enter the correct randomly generated port). In the URL api/movie/1, the first “api” segment indicates that this is a Web API route. The “movie” segment indicates that the MovieController should be invoked. You do not specify the name of the action. Instead, the HTTP method used to make the request – GET, POST, PUT, DELETE — is used to identify the action to invoke. The ASP.NET Web API uses different routing conventions than normal ASP.NET MVC controllers. When you make an HTTP GET request then any API controller method with a name that starts with “GET” is invoked. So, we could have called our API controller action GetPopcorn() instead of GetMovie() and it would still be invoked by the URL api/movie/1. The default route for the Web API is defined in the Global.asax file and it looks like this: routes.MapHttpRoute( name: "DefaultApi", routeTemplate: "api/{controller}/{id}", defaults: new { id = RouteParameter.Optional } ); We can invoke our GetMovie() controller action with the jQuery code in the following HTML page: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Get Movie</title> </head> <body> <div> Title: <span id="title"></span> </div> <div> Director: <span id="director"></span> </div> <script type="text/javascript" src="Scripts/jquery-1.6.2.min.js"></script> <script type="text/javascript"> getMovie(1, function (movie) { $("#title").html(movie.Title); $("#director").html(movie.Director); }); function getMovie(id, callback) { $.ajax({ url: "/api/Movie", data: { id: id }, type: "GET", contentType: "application/json;charset=utf-8", statusCode: { 200: function (movie) { callback(movie); }, 404: function () { alert("Not Found!"); } } }); } </script> </body> </html> In the code above, the jQuery $.ajax() method is used to invoke the GetMovie() method. Notice that the Ajax call handles two HTTP response codes. When the GetMove() method successfully returns a movie, the method returns a 200 status code. In that case, the details of the movie are displayed in the HTML page. Otherwise, if the movie is not found, the GetMovie() method returns a 404 status code. In that case, the page simply displays an alert box indicating that the movie was not found (hopefully, you would implement something more graceful in an actual application). You can use your browser’s Developer Tools to see what is going on in the background when you open the HTML page (hit F12 in the most recent version of most browsers). For example, you can use the Network tab in Google Chrome to see the Ajax request which invokes the GetMovie() method: Getting a Set of Records with the ASP.NET Web API Let’s modify our Movie API controller so that it returns a collection of movies. The following Movie controller has a new ListMovies() method which returns a (hard-coded) collection of movies: using System; using System.Collections.Generic; using System.Linq; using System.Net; using System.Net.Http; using System.Web.Http; using MyWebAPIApp.Models; namespace MyWebAPIApp.Controllers { public class MovieController : ApiController { public IEnumerable<Movie> ListMovies() { return new List<Movie> { new Movie {Id=1, Title="Star Wars", Director="Lucas"}, new Movie {Id=1, Title="King Kong", Director="Jackson"}, new Movie {Id=1, Title="Memento", Director="Nolan"} }; } } } Because we named our action ListMovies(), the default Web API route will never match it. Therefore, we need to add the following custom route to our Global.asax file (at the top of the RegisterRoutes() method): routes.MapHttpRoute( name: "ActionApi", routeTemplate: "api/{controller}/{action}/{id}", defaults: new { id = RouteParameter.Optional } ); This route enables us to invoke the ListMovies() method with the URL /api/movie/listmovies. Now that we have exposed our collection of movies from the server, we can retrieve and display the list of movies using jQuery in our HTML page: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>List Movies</title> </head> <body> <div id="movies"></div> <script type="text/javascript" src="Scripts/jquery-1.6.2.min.js"></script> <script type="text/javascript"> listMovies(function (movies) { var strMovies=""; $.each(movies, function (index, movie) { strMovies += "<div>" + movie.Title + "</div>"; }); $("#movies").html(strMovies); }); function listMovies(callback) { $.ajax({ url: "/api/Movie/ListMovies", data: {}, type: "GET", contentType: "application/json;charset=utf-8", }).then(function(movies){ callback(movies); }); } </script> </body> </html> Inserting a Record with the ASP.NET Web API Now let’s modify our Movie API controller so it supports creating new records: public HttpResponseMessage<Movie> PostMovie(Movie movieToCreate) { // Add movieToCreate to the database and update primary key movieToCreate.Id = 23; // Build a response that contains the location of the new movie var response = new HttpResponseMessage<Movie>(movieToCreate, HttpStatusCode.Created); var relativePath = "/api/movie/" + movieToCreate.Id; response.Headers.Location = new Uri(Request.RequestUri, relativePath); return response; } The PostMovie() method in the code above accepts a movieToCreate parameter. We don’t actually store the new movie anywhere. In real life, you will want to call a service method to store the new movie in a database. When you create a new resource, such as a new movie, you should return the location of the new resource. In the code above, the URL where the new movie can be retrieved is assigned to the Location header returned in the PostMovie() response. Because the name of our method starts with “Post”, we don’t need to create a custom route. The PostMovie() method can be invoked with the URL /Movie/PostMovie – just as long as the method is invoked within the context of a HTTP POST request. The following HTML page invokes the PostMovie() method. <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Create Movie</title> </head> <body> <script type="text/javascript" src="Scripts/jquery-1.6.2.min.js"></script> <script type="text/javascript"> var movieToCreate = { title: "The Hobbit", director: "Jackson" }; createMovie(movieToCreate, function (newMovie) { alert("New movie created with an Id of " + newMovie.Id); }); function createMovie(movieToCreate, callback) { $.ajax({ url: "/api/Movie", data: JSON.stringify( movieToCreate ), type: "POST", contentType: "application/json;charset=utf-8", statusCode: { 201: function (newMovie) { callback(newMovie); } } }); } </script> </body> </html> This page creates a new movie (the Hobbit) by calling the createMovie() method. The page simply displays the Id of the new movie: The HTTP Post operation is performed with the following call to the jQuery $.ajax() method: $.ajax({ url: "/api/Movie", data: JSON.stringify( movieToCreate ), type: "POST", contentType: "application/json;charset=utf-8", statusCode: { 201: function (newMovie) { callback(newMovie); } } }); Notice that the type of Ajax request is a POST request. This is required to match the PostMovie() method. Notice, furthermore, that the new movie is converted into JSON using JSON.stringify(). The JSON.stringify() method takes a JavaScript object and converts it into a JSON string. Finally, notice that success is represented with a 201 status code. The HttpStatusCode.Created value returned from the PostMovie() method returns a 201 status code. Updating a Record with the ASP.NET Web API Here’s how we can modify the Movie API controller to support updating an existing record. In this case, we need to create a PUT method to handle an HTTP PUT request: public void PutMovie(Movie movieToUpdate) { if (movieToUpdate.Id == 1) { // Update the movie in the database return; } // If you can't find the movie to update throw new HttpResponseException(HttpStatusCode.NotFound); } Unlike our PostMovie() method, the PutMovie() method does not return a result. The action either updates the database or, if the movie cannot be found, returns an HTTP Status code of 404. The following HTML page illustrates how you can invoke the PutMovie() method: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Put Movie</title> </head> <body> <script type="text/javascript" src="Scripts/jquery-1.6.2.min.js"></script> <script type="text/javascript"> var movieToUpdate = { id: 1, title: "The Hobbit", director: "Jackson" }; updateMovie(movieToUpdate, function () { alert("Movie updated!"); }); function updateMovie(movieToUpdate, callback) { $.ajax({ url: "/api/Movie", data: JSON.stringify(movieToUpdate), type: "PUT", contentType: "application/json;charset=utf-8", statusCode: { 200: function () { callback(); }, 404: function () { alert("Movie not found!"); } } }); } </script> </body> </html> Deleting a Record with the ASP.NET Web API Here’s the code for deleting a movie: public HttpResponseMessage DeleteMovie(int id) { // Delete the movie from the database // Return status code return new HttpResponseMessage(HttpStatusCode.NoContent); } This method simply deletes the movie (well, not really, but pretend that it does) and returns a No Content status code (204). The following page illustrates how you can invoke the DeleteMovie() action: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Delete Movie</title> </head> <body> <script type="text/javascript" src="Scripts/jquery-1.6.2.min.js"></script> <script type="text/javascript"> deleteMovie(1, function () { alert("Movie deleted!"); }); function deleteMovie(id, callback) { $.ajax({ url: "/api/Movie", data: JSON.stringify({id:id}), type: "DELETE", contentType: "application/json;charset=utf-8", statusCode: { 204: function () { callback(); } } }); } </script> </body> </html> Performing Validation How do you perform form validation when using the ASP.NET Web API? Because validation in ASP.NET MVC is driven by the Default Model Binder, and because the Web API uses the Default Model Binder, you get validation for free. Let’s modify our Movie class so it includes some of the standard validation attributes: using System.ComponentModel.DataAnnotations; namespace MyWebAPIApp.Models { public class Movie { public int Id { get; set; } [Required(ErrorMessage="Title is required!")] [StringLength(5, ErrorMessage="Title cannot be more than 5 characters!")] public string Title { get; set; } [Required(ErrorMessage="Director is required!")] public string Director { get; set; } } } In the code above, the Required validation attribute is used to make both the Title and Director properties required. The StringLength attribute is used to require the length of the movie title to be no more than 5 characters. Now let’s modify our PostMovie() action to validate a movie before adding the movie to the database: public HttpResponseMessage PostMovie(Movie movieToCreate) { // Validate movie if (!ModelState.IsValid) { var errors = new JsonArray(); foreach (var prop in ModelState.Values) { if (prop.Errors.Any()) { errors.Add(prop.Errors.First().ErrorMessage); } } return new HttpResponseMessage<JsonValue>(errors, HttpStatusCode.BadRequest); } // Add movieToCreate to the database and update primary key movieToCreate.Id = 23; // Build a response that contains the location of the new movie var response = new HttpResponseMessage<Movie>(movieToCreate, HttpStatusCode.Created); var relativePath = "/api/movie/" + movieToCreate.Id; response.Headers.Location = new Uri(Request.RequestUri, relativePath); return response; } If ModelState.IsValid has the value false then the errors in model state are copied to a new JSON array. Each property – such as the Title and Director property — can have multiple errors. In the code above, only the first error message is copied over. The JSON array is returned with a Bad Request status code (400 status code). The following HTML page illustrates how you can invoke our modified PostMovie() action and display any error messages: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Create Movie</title> </head> <body> <script type="text/javascript" src="Scripts/jquery-1.6.2.min.js"></script> <script type="text/javascript"> var movieToCreate = { title: "The Hobbit", director: "" }; createMovie(movieToCreate, function (newMovie) { alert("New movie created with an Id of " + newMovie.Id); }, function (errors) { var strErrors = ""; $.each(errors, function(index, err) { strErrors += "*" + err + "\n"; }); alert(strErrors); } ); function createMovie(movieToCreate, success, fail) { $.ajax({ url: "/api/Movie", data: JSON.stringify(movieToCreate), type: "POST", contentType: "application/json;charset=utf-8", statusCode: { 201: function (newMovie) { success(newMovie); }, 400: function (xhr) { var errors = JSON.parse(xhr.responseText); fail(errors); } } }); } </script> </body> </html> The createMovie() function performs an Ajax request and handles either a 201 or a 400 status code from the response. If a 201 status code is returned then there were no validation errors and the new movie was created. If, on the other hand, a 400 status code is returned then there was a validation error. The validation errors are retrieved from the XmlHttpRequest responseText property. The error messages are displayed in an alert: (Please don’t use JavaScript alert dialogs to display validation errors, I just did it this way out of pure laziness) This validation code in our PostMovie() method is pretty generic. There is nothing specific about this code to the PostMovie() method. In the following video, Jon Galloway demonstrates how to create a global Validation filter which can be used with any API controller action: http://www.asp.net/web-api/overview/web-api-routing-and-actions/video-custom-validation His validation filter looks like this: using System.Json; using System.Linq; using System.Net; using System.Net.Http; using System.Web.Http.Controllers; using System.Web.Http.Filters; namespace MyWebAPIApp.Filters { public class ValidationActionFilter:ActionFilterAttribute { public override void OnActionExecuting(HttpActionContext actionContext) { var modelState = actionContext.ModelState; if (!modelState.IsValid) { dynamic errors = new JsonObject(); foreach (var key in modelState.Keys) { var state = modelState[key]; if (state.Errors.Any()) { errors[key] = state.Errors.First().ErrorMessage; } } actionContext.Response = new HttpResponseMessage<JsonValue>(errors, HttpStatusCode.BadRequest); } } } } And you can register the validation filter in the Application_Start() method in the Global.asax file like this: GlobalConfiguration.Configuration.Filters.Add(new ValidationActionFilter()); After you register the Validation filter, validation error messages are returned from any API controller action method automatically when validation fails. You don’t need to add any special logic to any of your API controller actions to take advantage of the filter. Querying using OData The OData protocol is an open protocol created by Microsoft which enables you to perform queries over the web. The official website for OData is located here: http://odata.org For example, here are some of the query options which you can use with OData: · $orderby – Enables you to retrieve results in a certain order. · $top – Enables you to retrieve a certain number of results. · $skip – Enables you to skip over a certain number of results (use with $top for paging). · $filter – Enables you to filter the results returned. The ASP.NET Web API supports a subset of the OData protocol. You can use all of the query options listed above when interacting with an API controller. The only requirement is that the API controller action returns its data as IQueryable. For example, the following Movie controller has an action named GetMovies() which returns an IQueryable of movies: public IQueryable<Movie> GetMovies() { return new List<Movie> { new Movie {Id=1, Title="Star Wars", Director="Lucas"}, new Movie {Id=2, Title="King Kong", Director="Jackson"}, new Movie {Id=3, Title="Willow", Director="Lucas"}, new Movie {Id=4, Title="Shrek", Director="Smith"}, new Movie {Id=5, Title="Memento", Director="Nolan"} }.AsQueryable(); } If you enter the following URL in your browser: /api/movie?$top=2&$orderby=Title Then you will limit the movies returned to the top 2 in order of the movie Title. You will get the following results: By using the $top option in combination with the $skip option, you can enable client-side paging. For example, you can use $top and $skip to page through thousands of products, 10 products at a time. The $filter query option is very powerful. You can use this option to filter the results from a query. Here are some examples: Return every movie directed by Lucas: /api/movie?$filter=Director eq ‘Lucas’ Return every movie which has a title which starts with ‘S’: /api/movie?$filter=startswith(Title,’S') Return every movie which has an Id greater than 2: /api/movie?$filter=Id gt 2 The complete documentation for the $filter option is located here: http://www.odata.org/developers/protocols/uri-conventions#FilterSystemQueryOption Summary The goal of this blog entry was to provide you with an overview of the new ASP.NET Web API introduced with the Beta release of ASP.NET 4. In this post, I discussed how you can retrieve, insert, update, and delete data by using jQuery with the Web API. I also discussed how you can use the standard validation attributes with the Web API. You learned how to return validation error messages to the client and display the error messages using jQuery. Finally, we briefly discussed how the ASP.NET Web API supports the OData protocol. For example, you learned how to filter records returned from an API controller action by using the $filter query option. I’m excited about the new Web API. This is a feature which I expect to use with almost every ASP.NET application which I build in the future.

Read the article

Introduction to the ASP.NET Web API

- by Stephen.Walther

I am a huge fan of Ajax. If you want to create a great experience for the users of your website – regardless of whether you are building an ASP.NET MVC or an ASP.NET Web Forms site — then you need to use Ajax. Otherwise, you are just being cruel to your customers. We use Ajax extensively in several of the ASP.NET applications that my company, Superexpert.com, builds. We expose data from the server as JSON and use jQuery to retrieve and update that data from the browser. One challenge, when building an ASP.NET website, is deciding on which technology to use to expose JSON data from the server. For example, how do you expose a list of products from the server as JSON so you can retrieve the list of products with jQuery? You have a number of options (too many options) including ASMX Web services, WCF Web Services, ASHX Generic Handlers, WCF Data Services, and MVC controller actions. Fortunately, the world has just been simplified. With the release of ASP.NET 4 Beta, Microsoft has introduced a new technology for exposing JSON from the server named the ASP.NET Web API. You can use the ASP.NET Web API with both ASP.NET MVC and ASP.NET Web Forms applications. The goal of this blog post is to provide you with a brief overview of the features of the new ASP.NET Web API. You learn how to use the ASP.NET Web API to retrieve, insert, update, and delete database records with jQuery. We also discuss how you can perform form validation when using the Web API and use OData when using the Web API. Creating an ASP.NET Web API Controller The ASP.NET Web API exposes JSON data through a new type of controller called an API controller. You can add an API controller to an existing ASP.NET MVC 4 project through the standard Add Controller dialog box. Right-click your Controllers folder and select Add, Controller. In the dialog box, name your controller MovieController and select the Empty API controller template: A brand new API controller looks like this: using System; using System.Collections.Generic; using System.Linq; using System.Net.Http; using System.Web.Http; namespace MyWebAPIApp.Controllers { public class MovieController : ApiController { } } An API controller, unlike a standard MVC controller, derives from the base ApiController class instead of the base Controller class. Using jQuery to Retrieve, Insert, Update, and Delete Data Let’s create an Ajaxified Movie Database application. We’ll retrieve, insert, update, and delete movies using jQuery with the MovieController which we just created. Our Movie model class looks like this: namespace MyWebAPIApp.Models { public class Movie { public int Id { get; set; } public string Title { get; set; } public string Director { get; set; } } } Our application will consist of a single HTML page named Movies.html. We’ll place all of our jQuery code in the Movies.html page. Getting a Single Record with the ASP.NET Web API To support retrieving a single movie from the server, we need to add a Get method to our API controller: using System; using System.Collections.Generic; using System.Linq; using System.Net; using System.Net.Http; using System.Web.Http; using MyWebAPIApp.Models; namespace MyWebAPIApp.Controllers { public class MovieController : ApiController { public Movie GetMovie(int id) { // Return movie by id if (id == 1) { return new Movie { Id = 1, Title = "Star Wars", Director = "Lucas" }; } // Otherwise, movie was not found throw new HttpResponseException(HttpStatusCode.NotFound); } } } In the code above, the GetMovie() method accepts the Id of a movie. If the Id has the value 1 then the method returns the movie Star Wars. Otherwise, the method throws an exception and returns 404 Not Found HTTP status code. After building your project, you can invoke the MovieController.GetMovie() method by entering the following URL in your web browser address bar: http://localhost:[port]/api/movie/1 (You’ll need to enter the correct randomly generated port). In the URL api/movie/1, the first “api” segment indicates that this is a Web API route. The “movie” segment indicates that the MovieController should be invoked. You do not specify the name of the action. Instead, the HTTP method used to make the request – GET, POST, PUT, DELETE — is used to identify the action to invoke. The ASP.NET Web API uses different routing conventions than normal ASP.NET MVC controllers. When you make an HTTP GET request then any API controller method with a name that starts with “GET” is invoked. So, we could have called our API controller action GetPopcorn() instead of GetMovie() and it would still be invoked by the URL api/movie/1. The default route for the Web API is defined in the Global.asax file and it looks like this: routes.MapHttpRoute( name: "DefaultApi", routeTemplate: "api/{controller}/{id}", defaults: new { id = RouteParameter.Optional } ); We can invoke our GetMovie() controller action with the jQuery code in the following HTML page: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Get Movie</title> </head> <body> <div> Title: <span id="title"></span> </div> <div> Director: <span id="director"></span> </div> <script type="text/javascript" src="Scripts/jquery-1.6.2.min.js"></script> <script type="text/javascript"> getMovie(1, function (movie) { $("#title").html(movie.Title); $("#director").html(movie.Director); }); function getMovie(id, callback) { $.ajax({ url: "/api/Movie", data: { id: id }, type: "GET", contentType: "application/json;charset=utf-8", statusCode: { 200: function (movie) { callback(movie); }, 404: function () { alert("Not Found!"); } } }); } </script> </body> </html> In the code above, the jQuery $.ajax() method is used to invoke the GetMovie() method. Notice that the Ajax call handles two HTTP response codes. When the GetMove() method successfully returns a movie, the method returns a 200 status code. In that case, the details of the movie are displayed in the HTML page. Otherwise, if the movie is not found, the GetMovie() method returns a 404 status code. In that case, the page simply displays an alert box indicating that the movie was not found (hopefully, you would implement something more graceful in an actual application). You can use your browser’s Developer Tools to see what is going on in the background when you open the HTML page (hit F12 in the most recent version of most browsers). For example, you can use the Network tab in Google Chrome to see the Ajax request which invokes the GetMovie() method: Getting a Set of Records with the ASP.NET Web API Let’s modify our Movie API controller so that it returns a collection of movies. The following Movie controller has a new ListMovies() method which returns a (hard-coded) collection of movies: using System; using System.Collections.Generic; using System.Linq; using System.Net; using System.Net.Http; using System.Web.Http; using MyWebAPIApp.Models; namespace MyWebAPIApp.Controllers { public class MovieController : ApiController { public IEnumerable<Movie> ListMovies() { return new List<Movie> { new Movie {Id=1, Title="Star Wars", Director="Lucas"}, new Movie {Id=1, Title="King Kong", Director="Jackson"}, new Movie {Id=1, Title="Memento", Director="Nolan"} }; } } } Because we named our action ListMovies(), the default Web API route will never match it. Therefore, we need to add the following custom route to our Global.asax file (at the top of the RegisterRoutes() method): routes.MapHttpRoute( name: "ActionApi", routeTemplate: "api/{controller}/{action}/{id}", defaults: new { id = RouteParameter.Optional } ); This route enables us to invoke the ListMovies() method with the URL /api/movie/listmovies. Now that we have exposed our collection of movies from the server, we can retrieve and display the list of movies using jQuery in our HTML page: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>List Movies</title> </head> <body> <div id="movies"></div> <script type="text/javascript" src="Scripts/jquery-1.6.2.min.js"></script> <script type="text/javascript"> listMovies(function (movies) { var strMovies=""; $.each(movies, function (index, movie) { strMovies += "<div>" + movie.Title + "</div>"; }); $("#movies").html(strMovies); }); function listMovies(callback) { $.ajax({ url: "/api/Movie/ListMovies", data: {}, type: "GET", contentType: "application/json;charset=utf-8", }).then(function(movies){ callback(movies); }); } </script> </body> </html> Inserting a Record with the ASP.NET Web API Now let’s modify our Movie API controller so it supports creating new records: public HttpResponseMessage<Movie> PostMovie(Movie movieToCreate) { // Add movieToCreate to the database and update primary key movieToCreate.Id = 23; // Build a response that contains the location of the new movie var response = new HttpResponseMessage<Movie>(movieToCreate, HttpStatusCode.Created); var relativePath = "/api/movie/" + movieToCreate.Id; response.Headers.Location = new Uri(Request.RequestUri, relativePath); return response; } The PostMovie() method in the code above accepts a movieToCreate parameter. We don’t actually store the new movie anywhere. In real life, you will want to call a service method to store the new movie in a database. When you create a new resource, such as a new movie, you should return the location of the new resource. In the code above, the URL where the new movie can be retrieved is assigned to the Location header returned in the PostMovie() response. Because the name of our method starts with “Post”, we don’t need to create a custom route. The PostMovie() method can be invoked with the URL /Movie/PostMovie – just as long as the method is invoked within the context of a HTTP POST request. The following HTML page invokes the PostMovie() method. <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Create Movie</title> </head> <body> <script type="text/javascript" src="Scripts/jquery-1.6.2.min.js"></script> <script type="text/javascript"> var movieToCreate = { title: "The Hobbit", director: "Jackson" }; createMovie(movieToCreate, function (newMovie) { alert("New movie created with an Id of " + newMovie.Id); }); function createMovie(movieToCreate, callback) { $.ajax({ url: "/api/Movie", data: JSON.stringify( movieToCreate ), type: "POST", contentType: "application/json;charset=utf-8", statusCode: { 201: function (newMovie) { callback(newMovie); } } }); } </script> </body> </html> This page creates a new movie (the Hobbit) by calling the createMovie() method. The page simply displays the Id of the new movie: The HTTP Post operation is performed with the following call to the jQuery $.ajax() method: $.ajax({ url: "/api/Movie", data: JSON.stringify( movieToCreate ), type: "POST", contentType: "application/json;charset=utf-8", statusCode: { 201: function (newMovie) { callback(newMovie); } } }); Notice that the type of Ajax request is a POST request. This is required to match the PostMovie() method. Notice, furthermore, that the new movie is converted into JSON using JSON.stringify(). The JSON.stringify() method takes a JavaScript object and converts it into a JSON string. Finally, notice that success is represented with a 201 status code. The HttpStatusCode.Created value returned from the PostMovie() method returns a 201 status code. Updating a Record with the ASP.NET Web API Here’s how we can modify the Movie API controller to support updating an existing record. In this case, we need to create a PUT method to handle an HTTP PUT request: public void PutMovie(Movie movieToUpdate) { if (movieToUpdate.Id == 1) { // Update the movie in the database return; } // If you can't find the movie to update throw new HttpResponseException(HttpStatusCode.NotFound); } Unlike our PostMovie() method, the PutMovie() method does not return a result. The action either updates the database or, if the movie cannot be found, returns an HTTP Status code of 404. The following HTML page illustrates how you can invoke the PutMovie() method: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Put Movie</title> </head> <body> <script type="text/javascript" src="Scripts/jquery-1.6.2.min.js"></script> <script type="text/javascript"> var movieToUpdate = { id: 1, title: "The Hobbit", director: "Jackson" }; updateMovie(movieToUpdate, function () { alert("Movie updated!"); }); function updateMovie(movieToUpdate, callback) { $.ajax({ url: "/api/Movie", data: JSON.stringify(movieToUpdate), type: "PUT", contentType: "application/json;charset=utf-8", statusCode: { 200: function () { callback(); }, 404: function () { alert("Movie not found!"); } } }); } </script> </body> </html> Deleting a Record with the ASP.NET Web API Here’s the code for deleting a movie: public HttpResponseMessage DeleteMovie(int id) { // Delete the movie from the database // Return status code return new HttpResponseMessage(HttpStatusCode.NoContent); } This method simply deletes the movie (well, not really, but pretend that it does) and returns a No Content status code (204). The following page illustrates how you can invoke the DeleteMovie() action: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Delete Movie</title> </head> <body> <script type="text/javascript" src="Scripts/jquery-1.6.2.min.js"></script> <script type="text/javascript"> deleteMovie(1, function () { alert("Movie deleted!"); }); function deleteMovie(id, callback) { $.ajax({ url: "/api/Movie", data: JSON.stringify({id:id}), type: "DELETE", contentType: "application/json;charset=utf-8", statusCode: { 204: function () { callback(); } } }); } </script> </body> </html> Performing Validation How do you perform form validation when using the ASP.NET Web API? Because validation in ASP.NET MVC is driven by the Default Model Binder, and because the Web API uses the Default Model Binder, you get validation for free. Let’s modify our Movie class so it includes some of the standard validation attributes: using System.ComponentModel.DataAnnotations; namespace MyWebAPIApp.Models { public class Movie { public int Id { get; set; } [Required(ErrorMessage="Title is required!")] [StringLength(5, ErrorMessage="Title cannot be more than 5 characters!")] public string Title { get; set; } [Required(ErrorMessage="Director is required!")] public string Director { get; set; } } } In the code above, the Required validation attribute is used to make both the Title and Director properties required. The StringLength attribute is used to require the length of the movie title to be no more than 5 characters. Now let’s modify our PostMovie() action to validate a movie before adding the movie to the database: public HttpResponseMessage PostMovie(Movie movieToCreate) { // Validate movie if (!ModelState.IsValid) { var errors = new JsonArray(); foreach (var prop in ModelState.Values) { if (prop.Errors.Any()) { errors.Add(prop.Errors.First().ErrorMessage); } } return new HttpResponseMessage<JsonValue>(errors, HttpStatusCode.BadRequest); } // Add movieToCreate to the database and update primary key movieToCreate.Id = 23; // Build a response that contains the location of the new movie var response = new HttpResponseMessage<Movie>(movieToCreate, HttpStatusCode.Created); var relativePath = "/api/movie/" + movieToCreate.Id; response.Headers.Location = new Uri(Request.RequestUri, relativePath); return response; } If ModelState.IsValid has the value false then the errors in model state are copied to a new JSON array. Each property – such as the Title and Director property — can have multiple errors. In the code above, only the first error message is copied over. The JSON array is returned with a Bad Request status code (400 status code). The following HTML page illustrates how you can invoke our modified PostMovie() action and display any error messages: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Create Movie</title> </head> <body> <script type="text/javascript" src="Scripts/jquery-1.6.2.min.js"></script> <script type="text/javascript"> var movieToCreate = { title: "The Hobbit", director: "" }; createMovie(movieToCreate, function (newMovie) { alert("New movie created with an Id of " + newMovie.Id); }, function (errors) { var strErrors = ""; $.each(errors, function(index, err) { strErrors += "*" + err + "n"; }); alert(strErrors); } ); function createMovie(movieToCreate, success, fail) { $.ajax({ url: "/api/Movie", data: JSON.stringify(movieToCreate), type: "POST", contentType: "application/json;charset=utf-8", statusCode: { 201: function (newMovie) { success(newMovie); }, 400: function (xhr) { var errors = JSON.parse(xhr.responseText); fail(errors); } } }); } </script> </body> </html> The createMovie() function performs an Ajax request and handles either a 201 or a 400 status code from the response. If a 201 status code is returned then there were no validation errors and the new movie was created. If, on the other hand, a 400 status code is returned then there was a validation error. The validation errors are retrieved from the XmlHttpRequest responseText property. The error messages are displayed in an alert: (Please don’t use JavaScript alert dialogs to display validation errors, I just did it this way out of pure laziness) This validation code in our PostMovie() method is pretty generic. There is nothing specific about this code to the PostMovie() method. In the following video, Jon Galloway demonstrates how to create a global Validation filter which can be used with any API controller action: http://www.asp.net/web-api/overview/web-api-routing-and-actions/video-custom-validation His validation filter looks like this: using System.Json; using System.Linq; using System.Net; using System.Net.Http; using System.Web.Http.Controllers; using System.Web.Http.Filters; namespace MyWebAPIApp.Filters { public class ValidationActionFilter:ActionFilterAttribute { public override void OnActionExecuting(HttpActionContext actionContext) { var modelState = actionContext.ModelState; if (!modelState.IsValid) { dynamic errors = new JsonObject(); foreach (var key in modelState.Keys) { var state = modelState[key]; if (state.Errors.Any()) { errors[key] = state.Errors.First().ErrorMessage; } } actionContext.Response = new HttpResponseMessage<JsonValue>(errors, HttpStatusCode.BadRequest); } } } } And you can register the validation filter in the Application_Start() method in the Global.asax file like this: GlobalConfiguration.Configuration.Filters.Add(new ValidationActionFilter()); After you register the Validation filter, validation error messages are returned from any API controller action method automatically when validation fails. You don’t need to add any special logic to any of your API controller actions to take advantage of the filter. Querying using OData The OData protocol is an open protocol created by Microsoft which enables you to perform queries over the web. The official website for OData is located here: http://odata.org For example, here are some of the query options which you can use with OData: · $orderby – Enables you to retrieve results in a certain order. · $top – Enables you to retrieve a certain number of results. · $skip – Enables you to skip over a certain number of results (use with $top for paging). · $filter – Enables you to filter the results returned. The ASP.NET Web API supports a subset of the OData protocol. You can use all of the query options listed above when interacting with an API controller. The only requirement is that the API controller action returns its data as IQueryable. For example, the following Movie controller has an action named GetMovies() which returns an IQueryable of movies: public IQueryable<Movie> GetMovies() { return new List<Movie> { new Movie {Id=1, Title="Star Wars", Director="Lucas"}, new Movie {Id=2, Title="King Kong", Director="Jackson"}, new Movie {Id=3, Title="Willow", Director="Lucas"}, new Movie {Id=4, Title="Shrek", Director="Smith"}, new Movie {Id=5, Title="Memento", Director="Nolan"} }.AsQueryable(); } If you enter the following URL in your browser: /api/movie?$top=2&$orderby=Title Then you will limit the movies returned to the top 2 in order of the movie Title. You will get the following results: By using the $top option in combination with the $skip option, you can enable client-side paging. For example, you can use $top and $skip to page through thousands of products, 10 products at a time. The $filter query option is very powerful. You can use this option to filter the results from a query. Here are some examples: Return every movie directed by Lucas: /api/movie?$filter=Director eq ‘Lucas’ Return every movie which has a title which starts with ‘S’: /api/movie?$filter=startswith(Title,’S') Return every movie which has an Id greater than 2: /api/movie?$filter=Id gt 2 The complete documentation for the $filter option is located here: http://www.odata.org/developers/protocols/uri-conventions#FilterSystemQueryOption Summary The goal of this blog entry was to provide you with an overview of the new ASP.NET Web API introduced with the Beta release of ASP.NET 4. In this post, I discussed how you can retrieve, insert, update, and delete data by using jQuery with the Web API. I also discussed how you can use the standard validation attributes with the Web API. You learned how to return validation error messages to the client and display the error messages using jQuery. Finally, we briefly discussed how the ASP.NET Web API supports the OData protocol. For example, you learned how to filter records returned from an API controller action by using the $filter query option. I’m excited about the new Web API. This is a feature which I expect to use with almost every ASP.NET application which I build in the future.

Read the article

Setup Custom Portal & Content Enabled Domain

- by Stefan Krantz

When overlooking the past year we have seen a large increase in deployments where only some parts of the WebCenter Suite infrastructure has been used. The most common from my personal perspective is a domain topology that includes: WebCenter Custom Portal, WebCenter Content and Oracle HTTP ServicesToday its very common to see installation where the whole suite is installed when the use case only requires the custom portal and some sub component like WebCenter Content. This post will go into detail on how to minimize the deployment time and effort by only laying down the necessary managed servers needed, by following this proposed method you will minimize the configuration steps and only install the required components and schema's, configure only the necessary components and minimize the impact of architectural changes through reduced dependencies. Assumptions: Oracle 11g Database installed SYS or equivalent access to Database to setup schema's via RCU Running Operating System supporting JDK 7 Update 2 (Check support matrix here) Good understanding of WebLogic Architecture Binaries: Oracle JDK 7 Update 2 (1.7.0_02) (Download) Oracle WebLogic 10.3.6 (Download) Oracle WebCenter Binaries (11.1.1.6) (Download) Oracle WebCenter Content Binaries (11.1.1.6) (Download 1) (Download 2) Oracle HTTP Services (11.1.1.6) (Download) Oracle Repository Creation Utility (11.1.1.6) (Download Linux or Windows) Schema's: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} MDS - Meta Data Services (WebCenter and OWSM) WebCenter (WebCenter Schema) OCS (Oracle WebCenter Content) Activities (WebCenter Activities) OPSS (Policy Store for WebCenter) Installation Structure: - [Installation Home]/Middleware - Oracle_WC1 (WebCenter Installation) - Oracle_WT1 (Oracle WebTier) - Oracle_ECM (WebCenter Content) - wlserver_10.3 (Weblogic installation)- [Installation Home]/domains - webcenter (WebCenter Domain) - instances (OHS/OPMN instance)- [Installation Home]/applications- [Installation Home]/JDK1.7.0_02 Installation and Configuration Steps: Install Java and configure Java Home Extract the Java Installable (jdk-7u2-linux-x64) to [Installation Home]/JDK1.7.0_02 Add JAVA_HOME to Environment Settings (JAVA_HOME=[Installation Home]/JDK1.7.0_02) Update PATH in Environment Settings (PATH=$JAVA_HOME/bin:$PATH) Install WebLogic Server (Middleware Home) Run the installer / execute jar file (java - jar wls1036_generic.jar) Create the Middleware Home under [Installation Home]/Middleware Install WebCenter Portal (Extend Middleware Home) Extract the compressed file (ofm_wc_generic_11.1.1.6.0_disk1_1of1.zip) to a temp folder Execute runInstaller under folder (DISK1/) with following command (runInstaller -jreLoc $JAVA_HOME) Make sure to install in following structure ([Installation Home]/Middleware/Oracle_WC1) Install WebCenter Content (Extend Middleware Home) Extract the compressed files (ofm_wcc_generic_11.1.1.6.0_disk1_1of2.zip & ofm_wcc_generic_11.1.1.6.0_disk1_2of2.zip) to the same temp folder Execute runInstaller under folder (DISK1/) with following command (runInstaller -jreLoc $JAVA_HOME) Make sure to install in following structure ([Installation Home]/Middleware/Oracle_ECM) Configure Initial Domain (Domain name webcenter) Execute configuration tool - [Installation Home]/Middleware/wlserver_10.3/common/bin/config Select "Create a New Weblogic Domain" Select following template (Basic Weblogic Server Domain, Oracle Enterprise Manager, Oracle WSM Policy Manager, Oracle JRF) Create new domain with name webcenter under following location ([Installation Home]/domains) for applications ([Installation Home]/applications) Select Production Mode Finish Configuration wizard Setup username for startup scripts - Add a new file called boot.properties to ([Installation Home]/domains/webcenter/servers/AdminServer/security)Add following lines to boot.propertiesusername=weblogicpassword=[password clear text, it will be encrypted during first start] Start AdminServer in the background ([Installation Home]/domains/webcenter/bin/startWeblogic) Install and Configure Oracle WebTier (OHS Server) Extract compressed file (ofm_webtier_linux_11.1.1.6.0_64_disk1_1of1.zip) to a temp folder Execute runInstaller under folder (DISK1/) with following command (runInstaller) Select Install & Configure option Deselect Oracle WebCache Auto Configure Ports Configure Schema's with RCU (Repository Creation Utility) Extract compressed file (ofm_rcu_linux_11.1.1.6.0_disk1_1of1.zip) to a temp folder Execute rcu with following command ([temp]/rcuHome/rcu) Make sure database meets RCU requirements, particular (PROCESSES is 200 or more) Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Using SQLPLUS and sys user tou can update this configuration in the database with following procedure:ALTER SYSTEM SET PROCESSES=200 SCOPE=SPFILE shutdown immediate startup Create and Configure following schemas:MDS - Meta Data Services (WebCenter and OWSM)WebCenter (WebCenter Schema)OCS (Oracle WebCenter Content)Activities (WebCenter Activities)OPSS (Policy Store for WebCenter) Remember selected schema prefix and password (will be used later) Configure WebCenter Portal instance (WC_CustomPortal) Execute following command to start configuration wizard ([Installation Home]/Middleware/Oracle_WC1/common/bin/config) Select Extend an Existing WebLogic domain Select the existing webcenter domain ([Installation Home]/domains/webcenter) Select Extend my domain using existing extension templateBrowse to ([Installation Home]/Middleware/Oracle_WC1/common/templates/applications)Select oracle.wc_custom_portal_template_11.1.1.jar Select to configure (Managed Servers/Clusters/Machines) On the Managed Server Screen you can now configure 1 or more WC_CustomPortal managed servers (name them WC_CustomPortal[n] (skip numbering if not clustered)) In case of two WC_CustomPortal Servers then create a Cluster (any name) and make sure the managed servers join the new cluster Create a new machine with same name as the current machine Make sure the AdminServer and WC_CustomPortal[n] managed servers joins the machine Finish the configuration wizard Stop AdminServer ([Installation Home]/domains/webcenter/bin/stopWeblogic) Start AdminServer in the background ([Installation Home]/domains/webcenter/bin/startWeblogic) Start WC_CustomPortal in the foreground (([Installation Home]/domains/webcenter/bin/startManagedServer WC_CustomPortal))- repeat for each WC_CustomPortal instance on the host Give credentials for weblogic user on start up Copy folder security including file boot.properties - from ([Installation Home]/domains/webcenter/servers/AdminServer/) to ([Installation Home]/domains/webcenter/servers/WC_CustomPortal/) Result should be ([Installation Home]/domains/webcenter/servers/WC_CustomPortal/security/boot.properties) Configure WebCenter Content instance (UCM_server1) Execute following command to start configuration wizard ([Installation Home]/Middleware/Oracle_ECM/common/bin/config) Select Extend an Existing WebLogic domain Select Oracle Universal Content Management - Content Server Select to configure (Managed Servers/Clusters/Machines) On Managed Server Screen create only one managed server instance (UCM_server1 on port 16200 (you can select any other available port)) Make sure the UCM_server1 managed server joins the machine Finish the configuration wizard Stop AdminServer ([Installation Home]/domains/webcenter/bin/stopWeblogic) Start AdminServer in the background ([Installation Home]/domains/webcenter/bin/startWeblogic) Start UCM_server1 in the foreground ([Installation Home]/domains/webcenter/bin/startManagedServer UCM_server1)Give credentials for weblogic user on start up Copy folder security including file boot.properties - from ([Installation Home]/domains/webcenter/servers/AdminServer/) to ([Installation Home]/domains/webcenter/servers/UCM_server1/ Result should be ([Installation Home]/domains/webcenter/servers/UCM_server1/security/boot.properties) Post Configure WebCenter Content instance for WebCenter Portal Open a browser where you have support for Java applets - navigate to http://host:port/cs WARNING: The page that you are presented with after authentication will only appear once for each instance WARNING: Make sure you set correct storage options - also remember to consider file sharing options if you like to cluster your Content Server instance over multiple hosts Set an appropriate Auto number prefix Update the Server Socket Port: Commonly set to (4444) used for RIDC communication (a requirement for WebCenter Portal) Update the IP Address Filter to include the IP that is planned to access the server over RIDC - at the minimum add the ip address of the current host (this option can be updated later via EM) Stop UCM_server1 ([Installation Home]/domains/webcenter/bin/stopManagedServer UCM_server1) Start UCM_server1 in the background([Installation Home]/domains/webcenter/bin/startManagedServer UCM_server1) Open a browser where you have support for Java applets - navigate to http://host:port/cs Navigate to Administration/Admin Server Go to General ConfigurationCheck Enable AccountsIn Additional Configuration Variables (Add on two lines) Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} AllowUpdateForGenwww=1CollectionUseCache=1 Save the changes and go to Component Manager Click on the link advanced component manager Enable following components Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Folders_g, WebCenterConfigure, SiteStudio, SiteStudioExternalApplications, DBSearchContainsOpSupport WARNING: Make sure that following component is disabled: FrameworkFolders Stop UCM_server1 ([Installation Home]/domains/webcenter/bin/stopManagedServer UCM_server1) Start UCM_server1 in the background([Installation Home]/domains/webcenter/bin/startManagedServer UCM_server1) Open a browser where you have support for Java applets - navigate to http://host:port/cs Navigate to Administration/Site Studio Administration and update - Do not forget to save and submit each page Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Set Default ProjectSet Default WebAssets Post Configure Oracle WebTier (OHS) to include Content Server and WebCenter Portal application context Update following file - [Installation Home]/domains/instances/instance1/config/OHS/ohs1/mod_wl_ohs.conf For single add lines from following example: Link For clustered environment add lines from following template (note the clustering in example on applies to WC_CustomPortal): Link For more information on this: http://docs.oracle.com/cd/E23943_01/core.1111/e12037/contentsvr.htm#WCEDG318 Optional - Configure JOC Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Follow instructions: http://docs.oracle.com/cd/E23943_01/core.1111/e12037/extend_wc.htm#WCEDG264 Optional (Recommended) - Configure Node Manager Follow instructions: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} http://docs.oracle.com/cd/E23943_01/core.1111/e12037/node_manager.htm#WCEDG277 Optional (Mandatory for clustered environments) - Re-Associate Policy Store to Database or OID Follow instructions: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} http://docs.oracle.com/cd/E23943_01/webcenter.1111/e12405/wcadm_security_credstore.htm#CFHDEDJH Optional - Configure Coherence for Content Presenter Follow instructions in Blog Post (This post is for PS4): https://blogs.oracle.com/ATEAM_WEBCENTER/entry/enabling_coherence_for_content_presenter Other Recommended Post Cloning WebCenter Custom Portal - https://blogs.oracle.com/ATEAM_WEBCENTER/entry/cloning_a_webcenter_portal_managedImproving WebCenter Performance through caching - https://blogs.oracle.com/ATEAM_WEBCENTER/entry/improving_webcenter_performance

Read the article

Oracle Solaris: Zones on Shared Storage

- by Jeff Victor

Oracle Solaris 11.1 has several new features. At oracle.com you can find a detailed list. One of the significant new features, and the most significant new feature releated to Oracle Solaris Zones, is casually called "Zones on Shared Storage" or simply ZOSS (rhymes with "moss"). ZOSS offers much more flexibility because you can store Solaris Zones on shared storage (surprise!) so that you can perform quick and easy migration of a zone from one system to another. This blog entry describes and demonstrates the use of ZOSS. ZOSS provides complete support for a Solaris Zone that is stored on "shared storage." In this case, "shared storage" refers to fiber channel (FC) or iSCSI devices, although there is one lone exception that I will demonstrate soon. The primary intent is to enable you to store a zone on FC or iSCSI storage so that it can be migrated from one host computer to another much more easily and safely than in the past. With this blog entry, I wanted to make it easy for you to try this yourself. I couldn't assume that you have a SAN available - which is a good thing, because neither do I! What could I use, instead? [There he goes, foreshadowing again... -Ed.] Developing this entry reinforced the lesson that the solution to every lab problem is VirtualBox. Oracle VM VirtualBox (its formal name) helps here in a couple of important ways. It offers the ability to easily install multiple copies of Solaris as guests on top of any popular system (Microsoft Windows, MacOS, Solaris, Oracle Linux (and other Linuxes) etc.). It also offers the ability to create a separate virtual disk drive (VDI) that appears as a local hard disk to a guest. This virtual disk can be moved very easily from one guest to another. In other words, you can follow the steps below on a laptop or larger x86 system. Please note that the ability to use ZOSS to store a zone on a local disk is very useful for a lab environment, but not so useful for production. I do not suggest regularly moving disk drives among computers. In the method I describe below, that virtual hard disk will contain the zone that will be migrated among the (virtual) hosts. In production, you would use FC or iSCSI LUNs instead. The zonecfg(1M) man page details the syntax for each of the three types of devices. Why Migrate? Why is the migration of virtual servers important? Some of the most common reasons are: Moving a workload to a different computer so that the original computer can be turned off for extensive maintenance. Moving a workload to a larger system because the workload has outgrown its original system. If the workload runs in an environment (such as a Solaris Zone) that is stored on shared storage, you can restore the service of the workload on an alternate computer if the original computer has failed and will not reboot. You can simplify lifecycle management of a workload by developing it on a laptop, migrating it to a test platform when it's ready, and finally moving it to a production system. Concepts For ZOSS, the important new concept is named "rootzpool". You can read about it in the zonecfg(1M) man page, but here's the short version: it's the backing store (hard disk(s), or LUN(s)) that will be used to make a ZFS zpool - the zpool that will hold the zone. This zpool: contains the zone's Solaris content, i.e. the root file system does not contain any content not related to the zone can only be mounted by one Solaris instance at a time Method Overview Here is a brief list of the steps to create a zone on shared storage and migrate it. The next section shows the commands and output. You will need a host system with an x86 CPU (hopefully at least a couple of CPU cores), at least 2GB of RAM, and at least 25GB of free disk space. (The steps below will not actually use 25GB of disk space, but I don't want to lead you down a path that ends in a big sign that says "Your HDD is full. Good luck!") Configure the zone on both systems, specifying the rootzpool that both will use. The best way is to configure it on one system and then copy the output of "zonecfg export" to the other system to be used as input to zonecfg. This method reduces the chances of pilot error. (It is not necessary to configure the zone on both systems before creating it. You can configure this zone in multiple places, whenever you want, and migrate it to one of those places at any time - as long as those systems all have access to the shared storage.) Install the zone on one system, onto shared storage. Boot the zone. Provide system configuration information to the zone. (In the Real World(tm) you will usually automate this step.) Shutdown the zone. Detach the zone from the original system. Attach the zone to its new "home" system. Boot the zone. The zone can be used normally, and even migrated back, or to a different system. Details The rest of this shows the commands and output. The two hostnames are "sysA" and "sysB". Note that each Solaris guest might use a different device name for the VDI that they share. I used the device names shown below, but you must discover the device name(s) after booting each guest. In a production environment you would also discover the device name first and then configure the zone with that name. Fortunately, you can use the command "zpool import" or "format" to discover the device on the "new" host for the zone. The first steps create the VirtualBox guests and the shared disk drive. I describe the steps here without demonstrating them. Download VirtualBox and install it using a method normal for your host OS. You can read the complete instructions. Create two VirtualBox guests, each to run Solaris 11.1. Each will use its own VDI as its root disk. Install Solaris 11.1 in each guest.Install Solaris 11.1 in each guest. To install a Solaris 11.1 guest, you can either download a pre-built VirtualBox guest, and import it, or install Solaris 11.1 from the "text install" media. If you use the latter method, after booting you will not see a windowing system. To install the GUI and other important things, login and run "pkg install solaris-desktop" and take a break while it installs those important things. Life is usually easier if you install the VirtualBox Guest Additions because then you can copy and paste between the host and guests, etc. You can find the guest additions in the folder matching the version of VirtualBox you are using. You can also read the instructions for installing the guest additions. To create the zone's shared VDI in VirtualBox, you can open the storage configuration for one of the two guests, select the SATA controller, and click on the "Add Hard Disk" icon nearby. Choose "Create New Disk" and specify an appropriate path name for the file that will contain the VDI. The shared VDI must be at least 1.5 GB. Note that the guest must be stopped to do this. Add that VDI to the other guest - using its Storage configuration - so that each can access it while running. The steps start out the same, except that you choose "Choose Existing Disk" instead of "Create New Disk." Because the disk is configured on both of them, VirtualBox prevents you from running both guests at the same time. Identify device names of that VDI, in each of the guests. Solaris chooses the name based on existing devices. The names may be the same, or may be different from each other. This step is shown below as "Step 1." Assumptions In the example shown below, I make these assumptions. The guest that will own the zone at the beginning is named sysA. The guest that will own the zone after the first migration is named sysB. On sysA, the shared disk is named /dev/dsk/c7t2d0 On sysB, the shared disk is named /dev/dsk/c7t3d0 (Finally!) The Steps Step 1) Determine the name of the disk that will move back and forth between the systems. root@sysA:~# format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c7t0d0 /pci@0,0/pci8086,2829@d/disk@0,0 1. c7t2d0 /pci@0,0/pci8086,2829@d/disk@2,0 Specify disk (enter its number): ^D Step 2) The first thing to do is partition and label the disk. The magic needed to write an EFI label is not overly complicated. root@sysA:~# format -e c7t2d0 selecting c7t2d0 [disk formatted] FORMAT MENU: ... format fdisk No fdisk table exists. The default partition for the disk is: a 100% "SOLARIS System" partition Type "y" to accept the default partition, otherwise type "n" to edit the partition table. n SELECT ONE OF THE FOLLOWING: ... Enter Selection: 1 ... G=EFI_SYS 0=Exit? f SELECT ONE... ... 6 format label ... Specify Label type[1]: 1 Ready to label disk, continue? y format quit root@sysA:~# ls /dev/dsk/c7t2d0 /dev/dsk/c7t2d0 Step 3) Configure zone1 on sysA. root@sysA:~# zonecfg -z zone1 Use 'create' to begin configuring a new zone. zonecfg:zone1 create create: Using system default template 'SYSdefault' zonecfg:zone1 set zonename=zone1 zonecfg:zone1 set zonepath=/zones/zone1 zonecfg:zone1 add rootzpool zonecfg:zone1:rootzpool add storage dev:dsk/c7t2d0 zonecfg:zone1:rootzpool end zonecfg:zone1 exit root@sysA:~# oot@sysA:~# zonecfg -z zone1 info zonename: zone1 zonepath: /zones/zone1 brand: solaris autoboot: false bootargs: file-mac-profile: pool: limitpriv: scheduling-class: ip-type: exclusive hostid: fs-allowed: anet: ... rootzpool: storage: dev:dsk/c7t2d0 Step 4) Install the zone. This step takes the most time, but you can wander off for a snack or a few laps around the gym - or both! (Just not at the same time...) root@sysA:~# zoneadm -z zone1 install Created zone zpool: zone1_rpool Progress being logged to /var/log/zones/zoneadm.20121022T163634Z.zone1.install Image: Preparing at /zones/zone1/root. AI Manifest: /tmp/manifest.xml.RXaycg SC Profile: /usr/share/auto_install/sc_profiles/enable_sci.xml Zonename: zone1 Installation: Starting ... Creating IPS image Startup linked: 1/1 done Installing packages from: solaris origin: http://pkg.us.oracle.com/support/ DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 183/183 33556/33556 222.2/222.2 2.8M/s PHASE ITEMS Installing new actions 46825/46825 Updating package state database Done Updating image state Done Creating fast lookup database Done Installation: Succeeded Note: Man pages can be obtained by installing pkg:/system/manual done. Done: Installation completed in 1696.847 seconds. Next Steps: Boot the zone, then log into the zone console (zlogin -C) to complete the configuration process. Log saved in non-global zone as /zones/zone1/root/var/log/zones/zoneadm.20121022T163634Z.zone1.install Step 5) Boot the Zone. root@sysA:~# zoneadm -z zone1 boot Step 6) Login to zone's console to complete the specification of system information. root@sysA:~# zlogin -C zone1 Answer the usual questions and wait for a login prompt. Then you can end the console session with the usual "~." incantation. Step 7) Shutdown the zone so it can be "moved." root@sysA:~# zoneadm -z zone1 shutdown Step 8) Detach the zone so that the original global zone can't use it. root@sysA:~# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - zone1 installed /zones/zone1 solaris excl root@sysA:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 17.6G 11.2G 6.47G 63% 1.00x ONLINE - zone1_rpool 1.98G 484M 1.51G 23% 1.00x ONLINE - root@sysA:~# zoneadm -z zone1 detach Exported zone zpool: zone1_rpool Step 9) Review the result and shutdown sysA so that sysB can use the shared disk. root@sysA:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 17.6G 11.2G 6.47G 63% 1.00x ONLINE - root@sysA:~# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - zone1 configured /zones/zone1 solaris excl root@sysA:~# init 0 Step 10) Now boot sysB and configure a zone with the parameters shown above in Step 1. (Again, the safest method is to use "zonecfg ... export" on sysA as described in section "Method Overview" above.) The one difference is the name of the rootzpool storage device, which was shown in the list of assumptions, and which you must determine by booting sysB and using the "format" or "zpool import" command. When that is done, you should see the output shown next. (I used the same zonename - "zone1" - in this example, but you can choose any valid zonename you want.) root@sysB:~# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - zone1 configured /zones/zone1 solaris excl root@sysB:~# zonecfg -z zone1 info zonename: zone1 zonepath: /zones/zone1 brand: solaris autoboot: false bootargs: file-mac-profile: pool: limitpriv: scheduling-class: ip-type: exclusive hostid: fs-allowed: anet: linkname: net0 ... rootzpool: storage: dev:dsk/c7t3d0 Step 11) Attaching the zone automatically imports the zpool. root@sysB:~# zoneadm -z zone1 attach Imported zone zpool: zone1_rpool Progress being logged to /var/log/zones/zoneadm.20121022T184034Z.zone1.attach Installing: Using existing zone boot environment Zone BE root dataset: zone1_rpool/rpool/ROOT/solaris Cache: Using /var/pkg/publisher. Updating non-global zone: Linking to image /. Processing linked: 1/1 done Updating non-global zone: Auditing packages. No updates necessary for this image. Updating non-global zone: Zone updated. Result: Attach Succeeded. Log saved in non-global zone as /zones/zone1/root/var/log/zones/zoneadm.20121022T184034Z.zone1.attach root@sysB:~# zoneadm -z zone1 boot root@sysB:~# zlogin zone1 [Connected to zone 'zone1' pts/2] Oracle Corporation SunOS 5.11 11.1 September 2012 Step 12) Now let's migrate the zone back to sysA. Create a file in zone1 so we can verify it exists after we migrate the zone back, then begin migrating it back. root@zone1:~# ls /opt root@zone1:~# touch /opt/fileA root@zone1:~# ls -l /opt/fileA -rw-r--r-- 1 root root 0 Oct 22 14:47 /opt/fileA root@zone1:~# exit logout [Connection to zone 'zone1' pts/2 closed] root@sysB:~# zoneadm -z zone1 shutdown root@sysB:~# zoneadm -z zone1 detach Exported zone zpool: zone1_rpool root@sysB:~# init 0 Step 13) Back on sysA, check the status. Oracle Corporation SunOS 5.11 11.1 September 2012 root@sysA:~# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - zone1 configured /zones/zone1 solaris excl root@sysA:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 17.6G 11.2G 6.47G 63% 1.00x ONLINE - Step 14) Re-attach the zone back to sysA. root@sysA:~# zoneadm -z zone1 attach Imported zone zpool: zone1_rpool Progress being logged to /var/log/zones/zoneadm.20121022T190441Z.zone1.attach Installing: Using existing zone boot environment Zone BE root dataset: zone1_rpool/rpool/ROOT/solaris Cache: Using /var/pkg/publisher. Updating non-global zone: Linking to image /. Processing linked: 1/1 done Updating non-global zone: Auditing packages. No updates necessary for this image. Updating non-global zone: Zone updated. Result: Attach Succeeded. Log saved in non-global zone as /zones/zone1/root/var/log/zones/zoneadm.20121022T190441Z.zone1.attach root@sysA:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 17.6G 11.2G 6.47G 63% 1.00x ONLINE - zone1_rpool 1.98G 491M 1.51G 24% 1.00x ONLINE - root@sysA:~# zoneadm -z zone1 boot root@sysA:~# zlogin zone1 [Connected to zone 'zone1' pts/2] Oracle Corporation SunOS 5.11 11.1 September 2012 root@zone1:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 1.98G 538M 1.46G 26% 1.00x ONLINE - Step 15) Check for the file created on sysB, earlier. root@zone1:~# ls -l /opt total 1 -rw-r--r-- 1 root root 0 Oct 22 14:47 fileA Next Steps Here is a brief list of some of the fun things you can try next. Add space to the zone by adding a second storage device to the rootzpool. Make sure that you add it to the configurations of both zones! Create a new zone, specifying two disks in the rootzpool when you first configure the zone. When you install that zone, or clone it from another zone, zoneadm uses those two disks to create a mirrored pool. (Three disks will result in a three-way mirror, etc.) Conclusion Hopefully you have seen the ease with which you can now move Solaris Zones from one system to another.

Read the article

WCF 4.0 new enhancements over WCF 3.5

- by chugh97

What are the new enhancements in WCF 4.0 and how easy would it be to upgrade existing WCF services to 4.0?

Read the article

Unity.ResolutionFailedException - Resolution of the dependency failed

- by Anibas

I have the following code: public static IEngine CreateEngine() { UnityContainer container = Unity.LoadUnityContainer(DefaultStrategiesContainerName); IEnumerable<IStrategy> strategies = container.ResolveAll<IStrategy>(); ITraderProvider provider = container.Resolve<ITraderProvider>(); return new Engine(provider, new List<IStrategy>(strategies)); } and the config: <unity> <typeAliases> <typeAlias alias="singleton" type="Microsoft.Practices.Unity.ContainerControlledLifetimeManager, Microsoft.Practices.Unity" /> <typeAlias alias="weakRef" type="Microsoft.Practices.Unity.ExternallyControlledLifetimeManager, Microsoft.Practices.Unity" /> <typeAlias alias="Strategy" type="ADTrader.Core.Contracts.IStrategy, ADTrader.Core" /> <typeAlias alias="Trader" type="ADTrader.Core.Contracts.ITraderProvider, ADTrader.Core" /> </typeAliases> <containers> <container name="strategies"> <types> <type type="Strategy" mapTo="ADTrader.Strategies.ThreeTurningStrategy, ADTrader.Strategies" name="1" /> <type type="Trader" mapTo="ADTrader.MbTradingProvider.MBTradingProvider, ADTrader.MbTradingProvider" /> </types> </container> </containers></unity> I am getting the following exception: Microsoft.Practices.Unity.ResolutionFailedException: Resolution of the dependency failed, type = "ADTrader.Core.Contracts.ITraderProvider", name = "". Exception message is: The current build operation (build key Build Key[ADTrader.MbTradingProvider.MBTradingProvider, null]) failed: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (Strategy type BuildPlanStrategy, index 3) --- Microsoft.Practices.ObjectBuilder2.BuildFailedException: The current build operation (build key Build Key[ADTrader.MbTradingProvider.MBTradingProvider, null]) failed: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (Strategy type BuildPlanStrategy, index 3) --- System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. at MBTCOMLib.MbtComMgrClass.EnableSplash(Boolean bEnable) at ADTrader.MbTradingProvider.MBTradingProvider..ctor() at BuildUp_ADTrader.MbTradingProvider.MBTradingProvider(IBuilderContext ) at Microsoft.Practices.ObjectBuilder2.DynamicMethodBuildPlan.BuildUp(IBuilderContext context) at Microsoft.Practices.ObjectBuilder2.BuildPlanStrategy.PreBuildUp(IBuilderContext context) at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context) --- End of inner exception stack trace --- at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context) at Microsoft.Practices.ObjectBuilder2.Builder.BuildUp(IReadWriteLocator locator, ILifetimeContainer lifetime, IPolicyList policies, IStrategyChain strategies, Object buildKey, Object existing) at Microsoft.Practices.Unity.UnityContainer.DoBuildUp(Type t, Object existing, String name) --- End of inner exception stack trace --- at Microsoft.Practices.Unity.UnityContainer.DoBuildUp(Type t, Object existing, String name) at Microsoft.Practices.Unity.UnityContainer.Resolve(Type t, String name) at Microsoft.Practices.Unity.UnityContainerBase.ResolveT at ADTrader.Engine.EngineFactory.CreateEngine() Any idea?

Read the article

NATUPnP IStaticPortMappingCollection::Add returns HRESULT 0x80040214

- by dauphic

I'm attempting to use Microsoft's NATUPnP library to create a port mapping. Unfortunately, I'm unable to. My router supports UPnP, it is enabled, and I can create mappings with other (pre-built) applications. I can also read existing mappings. When I call the Add function, it fails and returns HRESULT 0x80040214 (which is undocumented). I have absolutely no idea what might be going on. IStaticPortMapping* newMapping = NULL; hr = portMappings->Add(27015, L"TCP", 27015, L"MYCOMPUTER", VARIANT_TRUE, L"TestMapping", &newMapping); You can see the reference for this function at http://msdn.microsoft.com/en-us/library/aa366148%28v=VS.85%29.aspx. The portMappings object is, of course, valid; I use it earlier in the code to enumerate over the existing mappings. If anyone has experience with this and might know what my problem is, I'd appreciate any help.

Read the article

JSF 2 equivalent of tomahawk subform

- by digitaljoel

I have an existing JSF 1.2 app that was a portlet running on glassfish v2. I'm converting it to a webapp running on glassfish v3. The app uses tomahawk subforms in several areas. Tomahawk has not been update for JSF 2, which is what ships with glassfish v3. We would like to update our app to JSF 2. Is there a JSF 2 equivalent to tomahawk's subform? I know one option would be to change all of the subforms to be ajax enabled and use the execute attribute to specify which controls take part in the form submission, but would like to make this as straight across as I can without modifying existing functionality if I can. So, lacking a tomahawk subform substitute, is there any way to specify partial form submission for non ajax events?

Read the article

datagrid height issue in nested datagrid( when using three data grid)

- by prince23

hi, i have a nested datagrid(which is of three data grid). here i am able to show data with no issue. the first datagrid has 5 rows the main problem that comes here is when you click any row in first datagrid i show 2 datagrid( which has 10 rows) lets say i click 3 row in 2 data grid. it show further records in third datagrid. again when i click 5 row in 2 data grid it show further records in third datagrid. now all the recods are shown fine when u try to collpase the 3 row in 2 data grid it collpase but the issue is the height what the third datagrid which took space for showing the records( we can see a blank space showing between the main 2 datagrid and third data grid) in every grid first column i have an button where i am writing this code for expand and collpase this is the functionality i am implementing in all the datagrid button where i do expand collpase. hope my question is clear . any help would great private void btn1_Click(object sender, RoutedEventArgs e) { try { Button btnExpandCollapse = sender as Button; Image imgScore = (Image)btnExpandCollapse.FindName("img"); DependencyObject dep = (DependencyObject)e.OriginalSource; while ((dep != null) && !(dep is DataGridRow)) { dep = VisualTreeHelper.GetParent(dep); } // if we found the clicked row if (dep != null && dep is DataGridRow) { DataGridRow row = (DataGridRow)dep; // change the details visibility if (row.DetailsVisibility == Visibility.Collapsed) { imgScore.Source = new BitmapImage(new Uri("/Images/a1.JPG", UriKind.Relative)); row.DetailsVisibility = Visibility.Visible; } else { imgScore.Source = new BitmapImage(new Uri("/Images/a2JPG", UriKind.Relative)); row.DetailsVisibility = Visibility.Collapsed; } } } catch (System.Exception) { } } --------------------------------------- 2 datagrid private void btn2_Click(object sender, RoutedEventArgs e) { try { Button btnExpandCollapse = sender as Button; Image imgScore = (Image)btnExpandCollapse.FindName("img"); DependencyObject dep = (DependencyObject)e.OriginalSource; while ((dep != null) && !(dep is DataGridRow)) { dep = VisualTreeHelper.GetParent(dep); } // if we found the clicked row if (dep != null && dep is DataGridRow) { DataGridRow row = (DataGridRow)dep; // change the details visibility if (row.DetailsVisibility == Visibility.Collapsed) { imgScore.Source = new BitmapImage(new Uri("/Images/a1.JPG", UriKind.Relative)); row.DetailsVisibility = Visibility.Visible; } else { imgScore.Source = new BitmapImage(new Uri("/Images/a2JPG", UriKind.Relative)); row.DetailsVisibility = Visibility.Collapsed; } } } catch (System.Exception) { } } ----------------- 3 datagrid private void btn1_Click(object sender, RoutedEventArgs e) { try { Button btnExpandCollapse = sender as Button; Image imgScore = (Image)btnExpandCollapse.FindName("img"); DependencyObject dep = (DependencyObject)e.OriginalSource; while ((dep != null) && !(dep is DataGridRow)) { dep = VisualTreeHelper.GetParent(dep); } // if we found the clicked row if (dep != null && dep is DataGridRow) { DataGridRow row = (DataGridRow)dep; // change the details visibility if (row.DetailsVisibility == Visibility.Collapsed) { imgScore.Source = new BitmapImage(new Uri("/Images/a1.JPG", UriKind.Relative)); row.DetailsVisibility = Visibility.Visible; } else { imgScore.Source = new BitmapImage(new Uri("/Images/a2JPG", UriKind.Relative)); row.DetailsVisibility = Visibility.Collapsed; } } } catch (System.Exception) { } }**

Search Results

Search found 14354 results on 575 pages for 'existing records'.

Page 136/575 | < Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143 | Next Page >

- by Matthew

- by Theo

- by JonathanLIVE

- by boyb

- by Beeder

- by rizzo0917

- by Tim

- by Jason

- by Nemo

- by sandeepan

- by sandeepan

- by Sirish

- by matthew

- by Navaneeth

- by Tim Dexter

- by OWScott

- by Stephen.Walther

- by Stephen.Walther

- by Stefan Krantz

- by Jeff Victor

- by chugh97

- by Anibas

- by dauphic

- by digitaljoel

- by prince23

< Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143 | Next Page >