Search Results

Search found 3630 results on 146 pages for 'procedure'.

Page 136/146 | < Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >

• Windows XP machine not seeing external FAT32 partitions correctly

  - by Rob_before_edits

  About 8 months ago my Windows XP machine stopped being able to see FAT32 external drives when I plug them in... mostly. I will explain... It happens with all my FAT32 drives, whether they be unpowered external hard drives, powered external hard drives, SDHC cards plugged directly into the machine's card reader, or SDHC cards plugged in via a separate USB card reader. All of these drives/cards used to work fine on this machine. They all stopped working at about the same time. NTFS volumes are not affected. If I plug in NTFS external drives they are recognized right away. I even have one external drive with two partitions on it, one is NTFS which is recognized, the other is FAT32, which is not recognized. If I attach a FAT32 drive, then reboot, then the drive almost always becomes visible to the machine after the reboot. Sometimes I can plug in a FAT32 drive and it works right away. Not often though. I'd say I get lucky more often with SDHC cards than hard drives. I'm developing a theory that I only get lucky with hard drives if I'm running Acronis Disk Director when I plug them in, though that usually doesn't work either - I need more data here, this may be a red herring. Getting lucky with a hard drive is really rare, usually I have to reboot. When a FAT32 is recognized, either because I got lucky or because I rebooted, I can almost never safely disconnect it. It tells me "The device 'Generic volume' cannot be stopped right now. Try stopping the device again later". I can't seem to get around this. IIRC, I've tried closing every open window, and still no luck. Since I care about my data usually the only way to disconnect a FAT32 drive is to shut down the machine. As you can imagine, two reboots just to read a drive is getting pretty old... When the machine fails to see a FAT32 drive it usually comes up with the appropriate drive letter and the words "Local Disk" in Windows Explorer instead of the correct partition name. If I click on it I get "J:\ is not accessible. The parameter is incorrect." Before this problem arose I always clicked the "safely remove" button for everything, including SDHC cards where I think it's not necessary. I've known for a long time that this is the correct procedure for hard drives, so I don't think failing to do this was the cause of this problem (before someone asks :) Any answers or suggestions most welcome.

  Read the article

• Easiest way to replace preinstalled Windows 8 with new hard drive with Windows 7

  - by Andrew

  There are all kinds of questions and answers relevant moving Windows 8 to a new hard drive. I'm not seeing anything quite applicable to my situation. I have a new, unopened, unbooted notebook with pre-installed Windows 8. I will be replacing the hard drive before ever booting, unless that is not possible for some reason. I want to "downgrade" to Windows 7 Pro, and I want a clean installation. To do so legitimately, I apparently either need to: Upgrade Windows 8 to Windows 8 Pro using Windows 8 Pro Pack, then downgrade; or Just install a newly-licensed copy of Windows 7 Pro. (Let me know if I've missed an option.) Installation media is likely not a problem, though if I need something vendor-specific that I cannot otherwise download, that could present an issue (Asus notebook, if that matters). If I could, I would just buy the Pro Pack upgrade, swap the hard drive (without ever booting), then install Windows 7 Pro directly on the new hard drive, using the Pro Pack key for activation. Will this work? Are there any activation issues? Edited to clarify, as some comments and answers indicate confusion: Here is, ideally, what I want to do: Before ever powering on the notebook, remove the current hard drive. Replace this hard drive with a new, blank hard drive. Install a clean copy of Windows 7 Pro on this new, blank hard drive. Unless I have no choice to accomplish the end result (a clean install of Win7 Pro on the newly-installed, previously-blank hard drive), I am not wanting to: Install Windows 7 "over" the current Windows 8 install (after upgrading to Win8 Pro). That would involve using the currenly-installed hard drive. I want to use a new, different hard drive. Copy the Win8 install to the new hard drive, then install Windows 7 "over" that installation. Install Windows 7 "over" the current Windows 8 install (after upgrading to Win8 Pro), then copy the installation to the new hard drive. If I have to use one of those three options, I will, but only if there is no other choice. Please note that this question is not about licensing: I will purchase the necessary license(s) to accomplish this procedure legally (apparently either Win8 Pro Pack or Win7 Pro -- the former currently appears less expensive).

  Read the article

• Microsoft signed driver appears as publisher not verfied

  - by Priyanka Gupta

  Task at hand: Microsoft sign drivers on Win 7. I microsoft signed my driver package 3 times every time thinking I might have missed a step or something. However, I cannot seem to get rid of the Windows Security error message "Windows can't verify the publisher of this driver software'. This is not the first time I have signed the driver packages. I was successfully able to sign other driver packages a few months ago. However, with this driver package I keep getting Windows security dialog box. Here's the procedure I follow - Create a new cat file using INF2CAT tool. Self sign the driver using a Versign Class 3 Public Primary Certification Authority - G5.cer. Run the microsoft tests on DTM Servers and clients with the devices that use this driver. Create WLK submission package. Self sign the cab file. Submit the package for certification. The catalog file that comes back after successfully passing tests says Name of signer "Microsoft Windows Hardware Comptibility Publisher". When I check the validity of signature using SignTool, it says the signature is vaild. However, when I try to install the driver with new signed catalog file the windows complain. Any ideas? Edit 11/12/2012: Reply to Eugene's comment Thanks for the help, Eugene. Yes. I did sign two other driver packages before. One of them was modified version of WinUSB driver. I am using the same certificate I used when I signed those two driver packages a few months ago. It costs $250 per signing from Microsoft. I would think that Microsoft would complain about it during certification if the certificate is wrong. I use the following command to self sign the CAT file. I don't have to specify the ceritificate name as there's only one certificate in the directory - Signtool sign /v /a /n CompanyName /t http://timestamp.verisign.com/scripts/timestamp.dll OurCatalogFile.cat Below is the result from running Verify command on the Microsoft signed OurCatalogFile.cat C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\x64signtool verify /v "C:\User s\logotest\Documents\serialdriversigning\OurCatalogFile.cat" Verifying: C:\Users\logotest\Documents\serialdriversigning\OurCatalogFile.cat" Hash of file (sha1): BDDF39B1DD95881B462164129758A7FFD54F47D9 Signing Certificate Chain: Issued to: Microsoft Root Certificate Authority Issued by: Microsoft Root Certificate Authority Expires: Sun May 09 18:28:13 2021 SHA1 hash: CDD4EEAE6000AC7F40C3802C171E30148030C072 Issued to: Microsoft Windows Hardware Compatibility PCA Issued by: Microsoft Root Certificate Authority Expires: Thu Jun 04 16:15:46 2020 SHA1 hash: 8D42419D8B21E5CF9C3204D0060B19312B96EB78 Issued to: Microsoft Windows Hardware Compatibility Publisher Issued by: Microsoft Windows Hardware Compatibility PCA Expires: Wed Sep 18 18:20:55 2013 SHA1 hash: D94345C032D23404231DD3902F22AB1C2100341E The signature is timestamped: Tue Nov 06 11:26:48 2012 Timestamp Verified by: Issued to: Microsoft Root Authority Issued by: Microsoft Root Authority Expires: Thu Dec 31 02:00:00 2020 SHA1 hash: A43489159A520F0D93D032CCAF37E7FE20A8B419 Issued to: Microsoft Timestamping PCA Issued by: Microsoft Root Authority Expires: Sun Sep 15 02:00:00 2019 SHA1 hash: 3EA99A60058275E0ED83B892A909449F8C33B245 Issued to: Microsoft Time-Stamp Service Issued by: Microsoft Timestamping PCA Expires: Tue Apr 09 16:53:56 2013 SHA1 hash: 1895C2C907E0D7E5C0292B92C6EA8D0E236F525E Successfully verified: C:\Users\logotest\Documents\serialdriversigning\OurCatalogFile.cat" Number of files successfully Verified: 1 Number of warnings: 0 Number of errors: 0 Thank you!

  Read the article

• How to get php mail function to work on Debian “squeeze”?

  - by Neel Kamal

  I have installed Apache and PHP5 on my debian server. Firstly I tried it using sendmail. Here is the step by step procedure that I have tried : Step 1: apt-get install sendmail Step 2: /etc/init.d/apache2 restart But this didn't work. Then I tried using external SMTP . My domain is registered on BigRock.I registerd an email address there [email protected] and it gave me the required credentials. On server I installed sSMTP > apt-get install ssmtp > Configured "/etc/ssmtp/ssmtp.conf" file. In the configuration file I added [email protected] mailhub=smtp.fostergen.com:587 (Here I have doubt. I am not sure what to use here. I tried smtp.fostergen.com:587, smtp.fostergen.com:25,mx1.mailhostbox.com :587,mx1.mailhostbox.com:25. I am still not sure what to use here mailhostbox.com. I used mx1.mailhostbox.com as it was the mx entry for my domain on bigrock Here is the screenshot![screenshot of bigrock's email management tool] ) hostname=vs3204.ams2.alvotec.de (I entered the command hostname -f on my server and got it as result ) FromLineOverride=YES UseSTARTTLS=YES [email protected] AuthPass=password provided during email registration on bigrock > edited /etc/ssmtp/revaliases (added " root:[email protected]:mx1.mailhostbox.com :587 " in the last line) > edited php.ini file (sendmail_path = /usr/sbin/ssmtp -t) > /etc/init.d/apache2 restart But this didn't work. After this I tried eSMTP. Steps Performed : > apt-get install esmtp > edited /etc/esmtprc hostname=smtp.fostergen.com:587 username= [email protected] password: password provide by bigrock mda="/usr/bin/procmail -d %T" > linked eSMTP to the legacy Sendmail path by execting the command "ln -s /usr/bin/esmtp /usr/bin/sendmail" > edited php.ini file (/usr/bin/sendmail -t -i) > /etc/init.d/apache2 restart But this technique also failed. I just want to send email to users through php mail function. Kindly help. Where I am going wrong?

  Read the article

• Force Finder to log in as Guest to a SMB share

  - by slhck

  I have a QNAP NAS that offers a few SMB shares. As I'm in a trusted environment, my shares are accessible as guest rather than with a combination of username and password. Problem Now, when I click the name of the device in Finder's sidebar, I get the black "Connection failed" bar, with the option "Connect as...". When I click that, I receive: I can however press ? + K and enter the server's name manually, which gets me to this window: Here, I have to select "guest". Now, I can select one of the shares to connect to, and I'm finally connected to the server. If I select it in the sidebar, I get a list of all shares available, because I'm connected as "guest", obviously: What I need Well, as soon as I unmount all shares, I have to go through the same procedure of manually logging in as "guest" again, which I find quite annoying. Is there any way I could get Finder (or the underlying SMB client) to know which credentials to use? Or should I look for the solution rather on the server side? (I know that other SMB shares seem to work fine in my network) Diagnostics The only thing I can get out of Console.app is: 5/15/11 7:36:40 PM /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[200] SharePointBrowser::handleOpenCallBack returned 64 This message occurs when I click the name of the SMB server in the Finder sidebar. Here's the output of `smbclient -L meredith -U guest -d=2 charon:~ werner$ smbclient -L meredith -U guest -d=2 added interface ip=192.168.100.11 bcast=192.168.100.255 nmask=255.255.255.0 tdb(unnamed): tdb_open_ex: could not open file /private/var/samba/gencache.tdb: Permission denied Got a positive name query response from 192.168.100.100 ( 192.168.100.100 ) Password: Domain=[MEREDITH] OS=[Unix] Server=[Samba 3.5.2] Sharename Type Comment --------- ---- ------- music Disk movies Disk photos Disk software Disk archive Disk backups Disk IPC$ IPC IPC Service (NAS Server) Got a positive name query response from 192.168.100.100 ( 192.168.100.100 ) Domain=[MEREDITH] OS=[Unix] Server=[Samba 3.5.2] Server Comment --------- ------- Workgroup Master --------- ------- WORKGROUP MEREDITH Also, things I've tried: There is no relevant entry in the Keychain (but why would it, I'm only connecting as guest) Connecting with user name "Guest" and empty password logs me in but still after ejecting the last share, I get the same "Connection failed" error as before. The appropriate entry is made in the Keychain but obviously has no effect.

  Read the article

• Force Finder to log in as Guest to a SMB share

  - by slhck

  I have a QNAP NAS that offers a few SMB shares. As I'm in a trusted environment, my shares are accessible as guest rather than with a combination of username and password. Problem Now, when I click the name of the device in Finder's sidebar, I get the black "Connection failed" bar, with the option "Connect as...". When I click that, I receive: I can however press ? + K and enter the server's name manually, which gets me to this window: Here, I have to select "guest". Now, I can select one of the shares to connect to, and I'm finally connected to the server. If I select it in the sidebar, I get a list of all shares available, because I'm connected as "guest", obviously: What I need Well, as soon as I unmount all shares, I have to go through the same procedure of manually logging in as "guest" again, which I find quite annoying. Is there any way I could get Finder (or the underlying SMB client) to know which credentials to use? Or should I look for the solution rather on the server side? (I know that other SMB shares seem to work fine in my network) Diagnostics The only thing I can get out of Console.app is: 5/15/11 7:36:40 PM /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[200] SharePointBrowser::handleOpenCallBack returned 64 This message occurs when I click the name of the SMB server in the Finder sidebar. Here's the output of `smbclient -L meredith -U guest -d=2 charon:~ werner$ smbclient -L meredith -U guest -d=2 added interface ip=192.168.100.11 bcast=192.168.100.255 nmask=255.255.255.0 tdb(unnamed): tdb_open_ex: could not open file /private/var/samba/gencache.tdb: Permission denied Got a positive name query response from 192.168.100.100 ( 192.168.100.100 ) Password: Domain=[MEREDITH] OS=[Unix] Server=[Samba 3.5.2] Sharename Type Comment --------- ---- ------- music Disk movies Disk photos Disk software Disk archive Disk backups Disk IPC$ IPC IPC Service (NAS Server) Got a positive name query response from 192.168.100.100 ( 192.168.100.100 ) Domain=[MEREDITH] OS=[Unix] Server=[Samba 3.5.2] Server Comment --------- ------- Workgroup Master --------- ------- WORKGROUP MEREDITH Also, things I've tried: There is no relevant entry in the Keychain (but why would it, I'm only connecting as guest) Connecting with user name "Guest" and empty password logs me in but still after ejecting the last share, I get the same "Connection failed" error as before. The appropriate entry is made in the Keychain but obviously has no effect.

  Read the article

• Microsoft signed drivers appears as publisher not verfied

  - by Priyanka Gupta

  Task at hand: Microsoft sign drivers on Win 7. I microsoft signed my driver package 3 times every time thinking I might have missed a step or something. However, I cannot seem to get rid of the Windows Security error message "Windows can't verify the publisher of this driver software'. This is not the first time I have signed the driver packages. I was successfully able to sign other driver packages a few months ago. However, with this driver package I keep getting Windows security dialog box. Here's the procedure I follow - Create a new cat file using INF2CAT tool. Self sign the driver using a Versign Class 3 Public Primary Certification Authority - G5.cer. Run the microsoft tests on DTM Servers and clients with the devices that use this driver. Create WLK submission package. Self sign the cab file. Submit the package for certification. The catalog file that comes back after successfully passing tests says Name of signer "Microsoft Windows Hardware Comptibility Publisher". When I check the validity of signature using SignTool, it says the signature is vaild. However, when I try to install the driver with new signed catalog file the windows complain. Any ideas? Edit 11/12/2012: Reply to Eugene's comment Thanks for the help, Eugene. Yes. I did sign two other driver packages before. One of them was modified version of WinUSB driver. I am using the same certificate I used when I signed those two driver packages a few months ago. It costs $250 per signing from Microsoft. I would think that Microsoft would complain about it during certification if the certificate is wrong. I use the following command to self sign the CAT file. I don't have to specify the ceritificate name as there's only one certificate in the directory - Signtool sign /v /a /n CompanyName /t http://timestamp.verisign.com/scripts/timestamp.dll OurCatalogFile.cat Below is the result from running Verify command on the Microsoft signed OutCatalogFile.cat C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\x64signtool verify /v "C:\User s\logotest\Documents\serialdriversigning\OurCatalogFile.cat" Verifying: C:\Users\logotest\Documents\serialdriversigning\OurCatalogFile.cat" Hash of file (sha1): BDDF39B1DD95881B462164129758A7FFD54F47D9 Signing Certificate Chain: Issued to: Microsoft Root Certificate Authority Issued by: Microsoft Root Certificate Authority Expires: Sun May 09 18:28:13 2021 SHA1 hash: CDD4EEAE6000AC7F40C3802C171E30148030C072 Issued to: Microsoft Windows Hardware Compatibility PCA Issued by: Microsoft Root Certificate Authority Expires: Thu Jun 04 16:15:46 2020 SHA1 hash: 8D42419D8B21E5CF9C3204D0060B19312B96EB78 Issued to: Microsoft Windows Hardware Compatibility Publisher Issued by: Microsoft Windows Hardware Compatibility PCA Expires: Wed Sep 18 18:20:55 2013 SHA1 hash: D94345C032D23404231DD3902F22AB1C2100341E The signature is timestamped: Tue Nov 06 11:26:48 2012 Timestamp Verified by: Issued to: Microsoft Root Authority Issued by: Microsoft Root Authority Expires: Thu Dec 31 02:00:00 2020 SHA1 hash: A43489159A520F0D93D032CCAF37E7FE20A8B419 Issued to: Microsoft Timestamping PCA Issued by: Microsoft Root Authority Expires: Sun Sep 15 02:00:00 2019 SHA1 hash: 3EA99A60058275E0ED83B892A909449F8C33B245 Issued to: Microsoft Time-Stamp Service Issued by: Microsoft Timestamping PCA Expires: Tue Apr 09 16:53:56 2013 SHA1 hash: 1895C2C907E0D7E5C0292B92C6EA8D0E236F525E Successfully verified: C:\Users\logotest\Documents\serialdriversigning\OurCatalogFile.cat" Number of files successfully Verified: 1 Number of warnings: 0 Number of errors: 0 Thank you!

  Read the article

• Strange permission errors with Windows Server 2008

  - by Spirit

  I just don't know a better way to describe my issue that is driving me nuts. I am trying to establish a test domain with virtual machines on a box that has Win7 with VMwware workstation installed. The purpouse with this domain will be so that we can try and test different situations before they go into the production network. I build a VM with WinSrv2008R2 and I am using that VM as a template to make other servers for the domain by making clones of it. Now I raise a DC with one clone and a member server with another clone - I add the server to the domain. I am following a standard procedure as always (it is not my first domain). Then I make an admin account and I am adding the admin to be a member of the Domain and Enterprise Admins group. That admin is admin with full priviledges on the DC.. no problem there. But on the other server has ... somewhat half the privileges and I cant log in via RDP. I tryed with another account. Same issues. For example (with half the privileges): I can't open the Even Viewer if I go via Start - Administrative Tools - Event Viewer. But I can open the Even Viewer via the server manager. You can notice this on the image below. I mean WTF??? I am going crazy, I haven't experienced anything similar in my three years of expertise. I already lost 3 days troubleshooting this. Could this be related with the cloning? Perhaps if I make fresh installs of WinSrv2008 there won't be any problems? I've had raised test domains as VMs on other occasions before, and there weren't any problems then. This is VMware Workstation 8. I've made clones before, on Workstation 7 it didn't had any problems. Anyone has any ideas? UPDATE: This is the info from the event log when I try to access via RDP: An account failed to log on. Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: pat.coleman Account Domain: lab Failure Information: Failure Reason: Domain sid inconsistent. Status: 0xc000006d Sub Status: 0xc000019b

  Read the article

• Firefox: non-Vimperator way to do mouseless browsing?

  - by Peter Mortensen

  Is it possible to do efficient browsing with Firefox using only the keyboard (like in Opera)? By efficient I mean something faster than using TAB - this takes far too long. The arrow keys should be for navigation (in Opera it is Shift + arrow key). It can done with the Vimperator add-on, but isn't there a simpler way? Update 2: the closest to Opera's way is to enable caret navigation (F7 toggles this mode). It doesn't jump between links so it is a little bit slower, but the normal navigation (arrow keys, page up, page down, etc.) works and the focus/caret/cursor follows (in contrast to a text editor for page up/down). And text can be selected and copied like in a text editor. The biggest drawback is that in practice it is necessary to switch in and out of caret mode. And there is no indication of which mode is currently active. Update 1: a work-around (proposed by several but is not really what I am looking for) can be used if 3 settings are changed (to make it practical). After these changes the first few letters of a link text can be typed and that link will selected so pressing Enter will open it. Using the work-around the screen will jump around if it is a long page as it does not restrict itself to the current visible page, but it is usable. First settings change: menu Tools/Options/Advanced/tab General/Accessibility/Search for text when I start typing Turn this option on. Second settings change: set option to only go to links; in address bar enter: about:config followed by Enter. Then: press "I'll be careful, I promise", find the line accessibility.typeaheadfind.linksonly, select it and change the value to True by either hitting Enter or Shift+F10/Toggle (accessibility.typeaheadfind.linksonly is on line 11 when I tried). Third settings change: turn off case-sensitivity. Set accessibility.typeaheadfind.casesensitive to 0 (same procedure as for accessibility.typeaheadfind.linksonly, see above. When Enter is pressed a dialog box will appear with the current value. Type 0 and press Enter). To use: type some part of the link. If there are several possibilities use Ctrl+G (or F3) to jump between them. Use Ctrl+Enter to open in a new tab. Platform: Firefox 3.0.6, Windows XP 64 bit SP2.

  Read the article

• Unextending Sharepoint 2007 Web Application from a zone

  - by dunxd

  When our Sharepoint was migrated from Sharepoint 2003 to Sharepoint 2007 (both fully paid versions), the consultants who carried it out extended each web app into two IIS sites/zones (e.g. the original Web App was http://intranet, then http://newintranet and http://intranet would be created for Sharepoint 2007 - each with its own IIS site). The idea was that during the migration period we would set up DNS to point the old url to SP2003 servers and the new one to SP2007, then once the migration was complete, do a DNS change so the SP2007 would recieve the requests to the http://intranet type URLs. Unfortunately the contractors did not tidy up the application extensions and IIS sites after the migration, and for some time both URLs were in use, resulting in many document links pointing to the http://newintranet type URLs. This means I need to maintain these URLs. Due to a rejig of organisation structure we now need to relocate some Sharepoint sites, and I'd like to use the RDA Collaboration Sharepoint URL Redirector feature. However a limitation of this is that it doesn't work for Web Applications which have been extended into multiple zones. So I have a need to tidy up the situation that our consultants left behind. I think the right thing to do is use the "Remove Sharepoint from IIS Web Site" page in Central Admin to remove the zone for the newintranet type sites, and select the option to also delete the IIS site. That should result in having no IIS sites listening for http://newintranet type URLs. Is this the right procedure? Once I have done that I need to set up Sharepoint to receive requests sent to the http://newintranet type URLs so they will continue to work. I am not sure if I should do this: using Alternative Access Mappings or, by adding a host header to the IIS site or, creating a non Sharepoint IIS site for each http://newintranet type URL, and use IIS redirection to forward the requests to the new URL using variables to pass the path to the Sharepoint site. Does anyone have any thoughts on these options, or any other way of achieving this? Sharepoint 2007 is running on Windows 2003 with IIS6. We don't currently have plans/budget to upgrade to Sharepoint 2010.

  Read the article

• Rebasing a branch which is public

  - by Dror

  I'm failing to understand how to use git-rebase, and I consider the following example. Let's start a repository in ~/tmp/repo: $ git init Then add a file foo $ echo "hello world" > foo which is then added and committed: $ git add foo $ git commit -m "Added foo" Next, I started a remote repository. In ~/tmp/bare.git I ran $ git init --bare In order to link repo to bare.git I ran $ git remote add origin ../bare.git/ $ git push --set-upstream origin master Next, lets branch, add a file and set an upstream for the new branch b1: $ git checkout -b b1 $ echo "bar" > foo2 $ git add foo2 $ git commit -m "add foo2 in b1" $ git push --set-upstream origin b1 Now it is time to switch back to master and change something there: $ echo "change foo" > foo $ git commit -a -m "changed foo in master" $ git push At this point in master the file foo contain changed foo, while in b1 it is still hello world. Finally, I want to sync b1 with the progress made in master. $ git checkout b1 $ git fetch origin $ git rebase origin/master At this point git st returns: # On branch b1 # Your branch and 'origin/b1' have diverged, # and have 2 and 1 different commit each, respectively. # (use "git pull" to merge the remote branch into yours) # nothing to commit, working directory clean At this point the content of foo in the branch b1 is change foo as well. So what does this warning mean? I expected I should do a git push, git suggests to do git pull... According to this answer, this is more or less it, and in his comment @FrerichRaabe explicitly say that I don't need to do a pull. What's going on here? What is the danger, how should one proceed? How should the history be kept consistent? What is the interplay between the case described above and the following citation: Do not rebase commits that you have pushed to a public repository. taken from pro git book. I guess it is somehow related, and if not I would love to know why. What's the relation between the above scenario and the procedure I described in this post.

  Read the article

• Thinkpad speaker turns mute - Linux Codec issue?

  - by Curlew

  At some point a few days ago the speakers on my Lenovo Thinkpad T410 (Model number: 2537A11) suddenly stopped working randomly. This error happens every time I watch a video or listen to a music file. The sound just abruptly stops. At the moment, I can't produce a single sound no matter what I do. I am using Debian GNU/Linux on this laptop and there doesn't appear to be anything else wrong (the fan is working, no abnormal heat (staying around ~40°C), no other obvious errors or problems). Here is the output of a nice program someone pointed me to: martin@martin:~/Downloads$ sudo python run.py --monitor Using temporary directory: /dev/shm/hda-analyzer You may remove this directory when finished or if you like to download the most recent copy of hda-analyzer tool. Downloading file hda_analyzer.py Downloading file hda_guilib.py Downloading file hda_codec.py Downloading file hda_proc.py Downloading file hda_graph.py Downloading file hda_mixer.py Downloaded all files, executing hda_analyzer.py Watching 1 cards ====================================== Sound is working normally and then it stops and the following lines appear: Diff for codec 0/0 (0x14f15069): --- +++ @@ -164,17 +164,17 @@ Power: setting=D0, actual=D0 Node 0x1f [Pin Complex] wcaps 0x400501: Stereo Pincap 0x00000010: OUT Pin Default 0x901701f0: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT - Power: setting=D0, actual=D0 + Power: setting=D3, actual=D3 Connection: 2 0x10* 0x11 Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE And now there is also an error in the dmesg output hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. I changed the bdl_pos_adj to various numbers (-1, 0, 64, 1024) and either there is no change at all or dmesg reports that the adjustment is too big. I wonder if this bdl_pos_adj is the real reason for the error. Here is my hardware information provided by alsa-info.sh website. Okay, i did some serious testing and even installed Windows and now i officially conclude that this is a hard-ware related issue with my Laptop speakers. Reason: The error occurs in my installed Debian Linux, an Ubuntu Live distribution and Windows XP No error-message appears in all of the OS. The sound just keeps running and i can't hear a thing. I tested different setups, including OSS, ALSA and the pulseaudio server on top If i use my new usb-headphones i can hear sound all the time without any sudden silences. So obviously, although hard to believe, my laptop speakers are not okay (never heard of similar cases). I'll award the bounty to anyone who can point me to good tutorials or the procedure how to exchange my T410 speakers (i still have warranty. The laptop was bought in Germany, but now i am in Denmark). Or to someone who can explain me the output from hda-analyzer (big log above).

  Read the article

• Puppet and launchd services?

  - by Joel Westberg

  We have a production environment configured with Puppet, and want to be able to set up a similar environment on our development machines: a mix of Red Hats, Ubuntus and OSX. As might be expected, OSX is the odd man out here, and sadly, I'm having a lot of trouble with getting this to work. My first attempt was using macports, using the following declaration: package { 'rabbitmq-server': ensure => installed, provider => macports, } but this, sadly, generates the following error: Error: /Stage[main]/Rabbitmq/Package[rabbitmq-server]: Could not evaluate: Execution of '/opt/local/bin/port -q installed rabbitmq-server' returned 1: usage: cut -b list [-n] [file ...] cut -c list [file ...] cut -f list [-s] [-d delim] [file ...] while executing "exec dscl -q . -read /Users/$env(SUDO_USER) NFSHomeDirectory | cut -d ' ' -f 2" (procedure "mportinit" line 95) invoked from within "mportinit ui_options global_options global_variations" Next up, I figured I'd give homebrew a try. There is no package provider available by default, but puppet-homebrew seemed promising. Here, I got much farther, and actually managed to get the install to work. package { 'rabbitmq': ensure => installed, provider => brew, } file { "plist": path => "/Library/LaunchDaemons/homebrew.mxcl.rabbitmq.plist", source => "/usr/local/opt/rabbitmq/homebrew.mxcl.rabbitmq.plist", ensure => present, owner => root, group => wheel, mode => 0644, } service { "homebrew.mxcl.rabbitmq": enable => true, ensure => running, provider => "launchd", require => [ File["/Library/LaunchDaemons/homebrew.mxcl.rabbitmq.plist"] ], } Here, I don't get any error. But RabbitMQ doesn't start either (as it does if I do a manual load with launchctl) [... snip ...] Debug: Executing '/bin/launchctl list' Debug: Executing '/usr/bin/plutil -convert xml1 -o /dev/stdout /Library/LaunchDaemons/homebrew.mxcl.rabbitmq.plist' Debug: Executing '/usr/bin/plutil -convert xml1 -o /dev/stdout /var/db/launchd.db/com.apple.launchd/overrides.plist' Debug: /Schedule[weekly]: Skipping device resources because running on a host Debug: /Schedule[puppet]: Skipping device resources because running on a host Debug: Finishing transaction 2248294820 Debug: Storing state Debug: Stored state in 0.01 seconds Finished catalog run in 25.90 seconds What am I doing wrong?

  Read the article

• Why does this service refuse to start on Windows server 2003?

  - by PenguinCoder

  We have a Windows 2003 server with Cebos MQ1 (ver. 7 and ver. GRI) products installed that have been operational for years. After installing Microsoft 2010 C++ Redistributable package needed for other development, the MQ1 GRI service now fails to start. Event logs showed that two additional updates (.NET4 and the 2010 C++ Redistributable SP2) where installed by the redistributable as well. As soon as we discovered the MQ1 service was not starting properly, we removed these three installed packages. However the service still does not start; the dialog that pops up states 'The service started then stopped. '. Event logs when we attempt to start the service show nothing; IE: No errors, crashes, failures, or other information related to this service. Executing the MQ1Serv.exe directly specifies an issue of 'Missing command line operation, must specify install, uninstall and company abbreviation.' sc query MQ1Service(GRI) shows a clean exit for the Win32ExitCode of 0x0. Attempting to reinstall the client or server software gives an error of 'The procedure entry point ReInitializeCriticalSection could not be located in the dynamic link library KERNEL32.dll.' at the 'Registering Libraries' stage. At this point, further research has stated that the required function is in URL.dll and to verify the library is not corrupted. Running an sfc /scannow on the server has replaced a few DLLS; including the URL.DLL to versions from 2005. This actually broke other applications which required a reinstall (one of them being IE 7). After reinstall and updates, url.dll version is 7.0.5730.13 (2009) and Kernel32.dll is version 5.2.3790.4480 (2009). The MQ1 GRI service still will not start, specifying the same error as previous 'Service started then stopped'. Running a disassembler on Kernel32.dll and Url.dll show no functions named ReinitializeCriticalSection. Attempting the reinstall of the MQ1 client and server as well as starting the service again, fails once more. However, setting the compatibility mode on the MQ1 client install exe to 'Windows 95' actually gets the program to install. Setting the compatibility mode on the MQ1 server service does not enable it to start. I have been researching this problem for nearly a week and besides the advice to scan and replace url.dll, have come to no successful conclusions. This service was operational prior to the 2010 C++ install, without any additional parameters or settings. After removing the C++ install and all servicepacks/updates it installed silently, still does not correct the issue of the MQ1 GRI service not starting. Q: Has anyone else run into this or similar issue while attempting to get a service initialized? What have I overlooked or what else can I try in order to get this service started??

  Read the article

• mdadm raid1 fails to resync

  - by JuanD

  Hello, I'm trying to solve this problem I'm having with an mdadm raid1. I have an ubuntu 9.04 server running on a software 2-drive raid1 with mdadm. Yesterday, one of the drives failed, and so I replaced it with a brand new drive of the same size. I removed the faulty drive, copied the partition from the remaining good drive to the new drive and then added it to the raid. It re-synced and the system worked fine, until the drive that hadn't failed, was also labeled failed. Now I had the raid running solely on the new drive. So I purchased another drive and repeated the procedure above. So now I had 2 brand new drives and the raid was syncing. However, after a few minutes I checked /proc/mdstat and the raid was no longer syncing. mdadm --detail /dev/md1 shows: (sdb is the first new drive, and sdc is the second new drive) root@dola:/home/jjaramillo# mdadm --detail /dev/md1 /dev/md1: Version : 00.90 Creation Time : Sat Dec 20 00:42:05 2008 Raid Level : raid1 Array Size : 974711680 (929.56 GiB 998.10 GB) Used Dev Size : 974711680 (929.56 GiB 998.10 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Wed Jun 2 10:09:35 2010 State : clean, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 UUID : bba497c6:5029ba0b:bfa4f887:c0dc8f3d Events : 0.5395594 Number Major Minor RaidDevice State 2 8 35 0 spare rebuilding /dev/sdc3 1 8 19 1 active sync /dev/sdb3 I've tried removing and re-adding the drive a few times, but the same thing happens. The raid fails to resync. I've looked at /var/log/messages, and found the following: Jun 2 07:57:36 dola kernel: [35708.917337] sd 5:0:0:0: [sdb] Unhandled sense code Jun 2 07:57:36 dola kernel: [35708.917339] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jun 2 07:57:36 dola kernel: [35708.917342] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [descriptor] Jun 2 07:57:36 dola kernel: [35708.917346] Descriptor sense data with sense descriptors (in hex): Jun 2 07:57:36 dola kernel: [35708.917348] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 Jun 2 07:57:36 dola kernel: [35708.917357] 00 43 9e 47 Jun 2 07:57:36 dola kernel: [35708.917360] sd 5:0:0:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed So it looks like there's some kind of error on sdb (the first new drive). My question is, what would be the best approach to get the raid up and running again? I've thought about dd'ing the /dev/md1 to a blank hard drive, then re-doing the raid from scratch and loading the data back, but there could be an easier solution.. Any help would be appreciated.

  Read the article

• AGENT: The World's Smartest Watch

  - by Rob Chartier

  AGENT: The World's Smartest Watch by Secret Labs + House of Horology Disclaimer: Most if not all of this content has been gleaned from the comments on the Kickstarter project page and comments section. Any discrepancies between this post and any documentation on agentwatches.com, kickstarter.com, etc.., those official sites take precedence. Overview The next generation smartwatch with brand-new technology. World-class developer tools, unparalleled battery life, Qi wireless charging. Kickstarter Page, Comments Funding period : May 21, 2013 - Jun 20, 2013 MSRP : $249 Other Urls http://www.agentwatches.com/ https://www.facebook.com/agentwatches http://twitter.com/agentwatches http://pinterest.com/agentwatches/ http://paper.li/robchartier/1371234640 Developer Story The first official launch of the preview SDK and emulator will happen on 20-Jun-2013.  All development will be done in Visual Studio 2012, using the .NET Micro Framework SDK 2.3.  The SDK will ship with the first round of the expected API for developers along with an emulator. With that said, there is no need to wait for the SDK.  You can download the tooling now and get started with Apps and Faces immediately.  The only thing that you will not be able to work with is the API; but for example, watch faces, you can start building the basic face rendering with the Bitmap graphics drawing in the .NET Micro Framework.   Does it look good? Before we dig into any more of the gory details, here are a few photos of the current available prototype models.   The watch on the tiny QI Charter   If you wander too far away from your phone, your watch will let you know with a vibration and a message, all but one button will dismiss the message.   An app showing the premium weather data!   Nice stitching on the straps, leather and silicon will be available, along with a few lengths to choose from (short, regular, long lengths). On to those gory details…. Hardware Specs Processor 120MHz ARM Cortex-M4 processor (ATSAM4SD32) with secondary AVR co-processor Flash & RAM 2MB of onboard flash and 160KB of RAM 1/4 of the onboard flash will be used by the OS The flash is permanent (non-volatile) storage. Bluetooth Bluetooth 4.0 BD/EDR + LE Bluetooth 4.0 is backwards compatible with Bluetooth 2.1, so classic Bluetooth functions (BD/EDR, SPP/AVRCP/PBAP/etc.) will work fine. Sensors 3D Accelerometer (Motion) ST LSM303DLHC Ambient Light Sensor Hardware power metering Vibration Motor (You can pulse it to create vibration patterns, not sure about the vibration strength - driven with PWM) No piezo/speaker or microphone. Other QI Wireless Charging, no NFC, no wall adapter included Custom LED Backlight No GPS in the watch. It uses the GPS in your phone. AGENT watch apps are deployed and debugged wirelessly from your PC via Bluetooth. RoHS, Pb-free Battery Expected to use a CR2430-sized rechargeable battery – replaceable (Mouser, Amazon) Estimated charging time from empty is 2 hours with provided charger 7 Days typical with Bluetooth on, 30 days with Bluetooth off (watch-face only mode) The battery should last at least 2 years, with 100s of charge cycles. Physical dimensions Roughly 38mm top-to-bottom on the front face 35mm left-to-right on the front face and around 12mm in depth 22mm strap Two ~1/16" hex screws to attach the watch pin The top watchcase material candidates are PVD stainless steel, brushed matte ceramic, and high-quality polycarbonate (TBD). The glass lens is mineral glass, Anti-glare glass lens Strap options Leather and silicon straps will be available Expected to have three sizes Display 1.28" Sharp Memory Display The display stays on 100% of the time. Dimensions: 128x128 pixels Buttons Custom "Pusher" buttons, they will not make noise like a mouse click, and are very durable. The top-left button activates the backlight; bottom-left changes apps; three buttons on the right are up/select/down and can be used for custom purposes by apps. Backup reset procedure is currently activated by holding the home/menu button and the top-right user button for about ten seconds Device Support Android 2.3 or newer iPhone 4S or newer Windows Phone 8 or newer Heart Rate monitors - Bluetooth SPP or Bluetooth LE (GATT) is what you'll want the heart monitor to support. Almost limitless Bluetooth device support! Internationalization & Localization Full UTF8 Support from the ground up. AGENT's user interface is in English. Your content (caller ID, music tracks, notifications) will be in your native language. We have a plan to cover most major character sets, with Latin characters pre-loaded on the watch. Simplified Chinese will be available Feature overview Phone lost alert Caller ID Music Control (possible volume control) Wireless Charging Timer Stopwatch Vibrating Alarm (possibly custom vibrations for caller id) A few default watch faces Airplane mode (by demand or low power) Can be turned off completely Customizable 3rd party watch faces, applications which can be loaded over bluetooth. Sample apps that maybe installed Weather Sample Apps not installed Exercise App Other Possible Skype integration over Bluetooth. They will provide an AGENT app for your smartphone (iPhone, Android, Windows Phone). You'll be able to use it to load apps onto the watch.. You will be able to cancel phone calls. With compatible phones you can also answer, end, etc. They are adopting the standard hands-free profile to provide these features and caller ID.

  Read the article

• SQL SERVER – Database Dynamic Caching by Automatic SQL Server Performance Acceleration

  - by pinaldave

  My second look at SafePeak’s new version (2.1) revealed to me few additional interesting features. For those of you who hadn’t read my previous reviews SafePeak and not familiar with it, here is a quick brief: SafePeak is in business of accelerating performance of SQL Server applications, as well as their scalability, without making code changes to the applications or to the databases. SafePeak performs database dynamic caching, by caching in memory result sets of queries and stored procedures while keeping all those cache correct and up to date. Cached queries are retrieved from the SafePeak RAM in microsecond speed and not send to the SQL Server. The application gets much faster results (100-500 micro seconds), the load on the SQL Server is reduced (less CPU and IO) and the application or the infrastructure gets better scalability. SafePeak solution is hosted either within your cloud servers, hosted servers or your enterprise servers, as part of the application architecture. Connection of the application is done via change of connection strings or adding reroute line in the c:\windows\system32\drivers\etc\hosts file on all application servers. For those who would like to learn more on SafePeak architecture and how it works, I suggest to read this vendor’s webpage: SafePeak Architecture. More interesting new features in SafePeak 2.1 In my previous review of SafePeak new I covered the first 4 things I noticed in the new SafePeak (check out my article “SQLAuthority News – SafePeak Releases a Major Update: SafePeak version 2.1 for SQL Server Performance Acceleration”): Cache setup and fine-tuning – a critical part for getting good caching results Database templates Choosing which database to cache Monitoring and analysis options by SafePeak Since then I had a chance to play with SafePeak some more and here is what I found. 5. Analysis of SQL Performance (present and history): In SafePeak v.2.1 the tools for understanding of performance became more comprehensive. Every 15 minutes SafePeak creates and updates various performance statistics. Each query (or a procedure execute) that arrives to SafePeak gets a SQL pattern, and after it is used again there are statistics for such pattern. An important part of this product is that it understands the dependencies of every pattern (list of tables, views, user defined functions and procs). From this understanding SafePeak creates important analysis information on performance of every object: response time from the database, response time from SafePeak cache, average response time, percent of traffic and break down of behavior. One of the interesting things this behavior column shows is how often the object is actually pdated. The break down analysis allows knowing the above information for: queries and procedures, tables, views, databases and even instances level. The data is show now on all arriving queries, both read queries (that can be cached), but also any types of updates like DMLs, DDLs, DCLs, and even session settings queries. The stats are being updated every 15 minutes and SafePeak dashboard allows going back in time and investigating what happened within any time frame. 6. Logon trigger, for making sure nothing corrupts SafePeak cache data If you have an application with many parts, many servers many possible locations that can actually update the database, or the SQL Server is accessible to many DBAs or software engineers, each can access some database directly and do some changes without going thru SafePeak – this can create a potential corruption of the data stored in SafePeak cache. To make sure SafePeak cache is correct it needs to get all updates to arrive to SafePeak, and if a DBA will access the database directly and do some changes, for example, then SafePeak will simply not know about it and will not clean SafePeak cache. In the new version, SafePeak brought a new feature called “Logon Trigger” to solve the above challenge. By special click of a button SafePeak can deploy a special server logon trigger (with a CLR object) on your SQL Server that actually monitors all connections and informs SafePeak on any connection that is coming not from SafePeak. In SafePeak dashboard there is an interface that allows to control which logins can be ignored based on login names and IPs, while the rest will invoke cache cleanup of SafePeak and actually locks SafePeak cache until this connection will not be closed. Important to note, that this does not interrupt any logins, only informs SafePeak on such connection. On the Dashboard screen in SafePeak you will be able to see those connections and then decide what to do with them. Configuration of this feature in SafePeak dashboard can be done here: Settings -> SQL instances management -> click on instance -> Logon Trigger tab. Other features: 7. User management ability to grant permissions to someone without changing its configuration and only use SafePeak as performance analysis tool. 8. Better reports for analysis of performance using 15 minute resolution charts. 9. Caching of client cursors 10. Support for IPv6 Summary SafePeak is a great SQL Server performance acceleration solution for users who want immediate results for sites with performance, scalability and peak spikes challenges. Especially if your apps are packaged or 3rd party, since no code changes are done. SafePeak can significantly increase response times, by reducing network roundtrip to the database, decreasing CPU resource usage, eliminating I/O and storage access. SafePeak team provides a free fully functional trial www.safepeak.com/download and actually provides a one-on-one assistance during such trial. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, Pinal Dave, PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, T SQL, Technology

  Read the article

• Silverlight 5 Hosting :: Features in Silverlight 5 and Release Date

  - by mbridge

  Silverlight 5 is finally announced in the Silverlight FireStarter Event on the 2nd December, 2010. This new version of Silverlight which was earlier labeled as 'Future of Microsoft Silverlight' has now come much closer to go live as the first Silverlight 5 Beta version is expected to be shipped during the early months of 2011. However for the full fledged and the final release of Silverlight 5, we have to wait many more months as the same is likely to be made available within the Q3 2011. As would have been usually expected, this latest edition would feature many new capabilities thereby extending the developer productivity to a whole new dimension of premium media experience and feature-rich business applications. It comes along with many new feature updates as well as the inclusion of new technologies to improve the standard of the Silverlight applications which are now fine-tuned to produce next generation business and media solutions that is capable to meet the requirements of the advanced web-based app development. The Silverlight 5 is all set to replace the previous fourth version which now includes more than forty new features while also dropping various deprecated elements that was prevalent earlier. It has brought around some major performance enhancements and also included better support for various other tools and technologies. Following are some of the changes that are registered to be available under the Silverlight 5 Beta edition which is scheduled to be launched during the Q1 2011. Silverlight 5 : Premium Media Experiences The media features of Silverlight 5 has seen some major enhancements with a lot of optimizations being made to deliver richer solutions. It's capability has now been extended to make things easier, faster and capable of performing the desired tasks in the most efficient manner. The Silverlight media solutions has already been a part of many companies in the recent days where various on-demand Silverlight services were featured but with the arrival of the next generation premium media solution of Silverlight 5, it is expected to register new heights of success and global user acclamation for using it with many esteemed web-based projects and media solutions. - The most happening element in the new Silverlight 5 will be its support for utilizing the GPU based hardware acceleration which is intended to lower down the CPU load to a significant extent and thereby allowing faster rendering of media contents without consuming much resources. This feature is believed to be particularly helpful for low configured machines to run full HD media content without any lagging caused due to processor load. It will hence be one great feature to revolutionize the new generation high quality media contents to be available within the web in a more efficient manner with its hardware decoded video playback capabilities. - With the inclusion of hardware video decoding to minimize the processor load, the Silverlight 5 also comes with another optimization enhancement to also reduce the power consumption level by making new methods to deal with the power-saver settings. With this optimization in effect, the computer would be automatically allowed to switch to sleep mode while no video playback is in progress and also to prevent any screensavers to popup and cause annoyances during any video playback. There would also be other power saver options which will be made available to best suit the users requirements and purpose. - The Silverlight trickplay feature is another great way to tweak any silverlight powered media content as is used for many video tutorial sites or for dealing with any sort of presentations. This feature enables the user to modify the playback speed to either slowdown or speedup during the playback durations based on the requirements without compromising on the quality of output. Normally such manipulations always makes the content's audio to go off-pitch, but the same will not be the case with TrickPlay and the audio would seamlessly progress with the video without skipping any of its part. - In addition to all of the above, the new Silverlight 5 will be featuring wireless control of all the media contents by making use of remote controllers. With the use of such remote devices, it will be easier to handle the various media playback controls thereby providing more freedom while experiencing the premium media services. Silverlight 5 : Business Application Development The application development standard has been extended with more possibilities by bringing forth new and useful technologies and also reviving the existing methods to work better than what it was used to. From the UI improvements to advanced technical aspects, the Silverlight 5 scores high on all grounds to produce great next generation business delivered applications by putting in more creativity and resourceful touch to all the apps being produced with it. - The WPF feature of Silverlight is made more effective by introducing new standards of Databinding which is intended to improve the productivity standards of the Silverlight application developer. It brings in a lot of convenience in debugging the databinding components or expressions and hence making things work in a flawless manner. Some additional features related to databinding includes that of Ancestor RelativeSource, Implicit DataTemplates and Model View ViewModel (MVVM) support with DataContextChanged event and many other new features relating it. - It now comes with a refined text and printing service which facilitates better clarity of the text rendering and also many positive changes which are being applied to the layout pattern. New supports has been added to include OpenType font, multi-column text, linked-text containers and character leading support to name a few among the available features.This also includes some important printing aspects like that of Postscript Vector Printing API which allows to program our printing tasks in a user defined way and Pivot functionality for visualization concerns of informations. - The Graphics support is the key improvements being incorporated which now enables to utilize three dimensional graphics pattern using GPU acceleration. It can manage to provide some really cool visualizations being curved to provide media contents within the business apps with also the support for full HD contents at 1080p quality. - Silverlight 5 includes the support for 64-bit operating systems and relevant browsers and is also optimized to provide better performance. It can support the background thread for the networking which can reduce the latency of the network to a considerable extent. The Out-of-Browser functionality adds the support for utilizing various libraries and also the Win32 API. It also comes with testing support with VS 2010 which is mostly an automated procedure and has also enabled increased security aspects of all the Silverlight 5 developed applications by using the improved version of group policy support.

  Read the article

• ODI SDK: Retrieving Information From the Logs

  - by Christophe Dupupet

  It is fairly common to want to retrieve data from the ODI logs: statistics, execution status, even the generated code can be retrieved from the logs. The ODI SDK provides a robust set of APIs to parse the repository and retreve such information. To locate the information you are looking for, you have to keep in mind the structure of the logs: sessions contain steps; steps containt tasks. The session is the execution unit: basically, each time you execute something (interface, package, procedure, scenario) you create a new session. The steps are the individual entries found in a session: these will be the icons in your package for instance. Or if you are running an interface, you will have one single step: the interface itself. The tasks will represent the more atomic elements of the steps: the individual DDL, DML, scripts and so forth that are generated by ODI, along with all the detailed statistics for that task. All these details can be retrieved with the SDK. Because I had a question recently on the API ODIStepReport, I focus explicitly in this code on Scenario logs, but a lot more can be done with these APIs. Here is the code sample (you can just cut and paste that code in your ODI 11.1.1.6 Groovy console). Just save, adapt the code to your environment (in particular to connect to your repository) and hit "run" //Created by ODI Studioimport oracle.odi.core.OdiInstanceimport oracle.odi.core.config.OdiInstanceConfigimport oracle.odi.core.config.MasterRepositoryDbInfo import oracle.odi.core.config.WorkRepositoryDbInfo import oracle.odi.core.security.Authentication  import oracle.odi.core.config.PoolingAttributes import oracle.odi.domain.runtime.scenario.finder.IOdiScenarioFinder import oracle.odi.domain.runtime.scenario.OdiScenario import java.util.Collection import java.io.* /* ----------------------------------------------------------------------------------------- Simple sample code to list all executions of the last version of a scenario,along with detailed steps information----------------------------------------------------------------------------------------- */ /* update the following parameters to match your environment => */def url = "jdbc:oracle:thin:@myserver:1521:orcl"def driver = "oracle.jdbc.OracleDriver"def schema = "ODIM1116"def schemapwd = "ODIM1116PWD"def workrep = "WORKREP1116"def odiuser= "SUPERVISOR"def odiuserpwd = "SUNOPSIS" // Rather than hardcoding the project code and folder name, // a great improvement here would be to parse the entire repository def scenario_name = "LOAD_DWH" /*Scenario Name*/ /* <=End of the update section */ //--------------------------------------//Connection to the repository// Note for ODI 11.1.1.6: you could use predefined odiInstance variable if you are // running the script from a Studio that is already connected to the repository def masterInfo = new MasterRepositoryDbInfo(url, driver, schema, schemapwd.toCharArray(), new PoolingAttributes())def workInfo = new WorkRepositoryDbInfo(workrep, new PoolingAttributes())def odiInstance = OdiInstance.createInstance(new OdiInstanceConfig(masterInfo, workInfo)) //--------------------------------------// In all cases, we need to make sure we have authorized access to the repositorydef auth = odiInstance.getSecurityManager().createAuthentication(odiuser, odiuserpwd.toCharArray())odiInstance.getSecurityManager().setCurrentThreadAuthentication(auth) //--------------------------------------// Retrieve the scenario we are looking fordef odiScenario = ((IOdiScenarioFinder)odiInstance.getTransactionalEntityManager().getFinder(OdiScenario.class)).findLatestByName(scenario_name) if (odiScenario == null){    println("Error: cannot find scenario "+scenario_name);    return} //--------------------------------------// Retrieve all reports for the scenario def OdiScenarioReportsList = odiScenario.getScenarioReports() println("*** Listing all reports for Scenario \""+scenario_name+"\" ") //--------------------------------------// For each report, print the folowing:// - start time// - duration// - status// - step reports: selection of details for (s in OdiScenarioReportsList){        println("\tStart time: " + s.getSessionStartTime())        println("\tDuration: " + s.getSessionDuration())        println("\tStatus: " + s.getSessionStatus())                def OdiScenarioStepReportsList = s.getStepReports()        for (st in OdiScenarioStepReportsList){            println("\t\tStep Name: " + st.getStepName())            println("\t\tStep Resource Name: " + st.getStepResourceName())            println("\t\tStep Start time: " + st.getStepStartTime())            println("\t\tStep Duration: " + st.getStepDuration())            println("\t\tStep Status: " + st.getStepStatus())            println("\t\tStep # of inserts: " + st.getStepInsertCount())            println("\t\tStep # of updates: " + st.getStepUpdateCount()+'\n')      }      println("\t")}

  Read the article

• How To Replace Notepad in Windows 7

  - by Trevor Bekolay

  It used to be that Notepad was a necessary evil because it started up quickly and let us catch a quick glimpse of plain text files. Now, there are a bevy of capable Notepad replacements that are just as fast, but also have great feature sets. Before following the rest of this how-to, ensure that you’re logged into an account with Administrator access. Note: The following instructions involve modifying some Windows system folders. Don’t mess anything up while you’re in there! If you follow our instructions closely, you’ll be fine. Choose your replacement There are a ton of great Notepad replacements, including Notepad2, Metapad, and Notepad++. The best one for you will depend on what types of text files you open and what you do with them. We’re going to use Notepad++ in this how-to. The first step is to find the executable file that you’ll replace Notepad with. Usually this will be the only file with the .exe file extension in the folder where you installed your text editor. Copy the executable file to your desktop and try to open it, to make sure that it works when opened from a different folder. In the Notepad++ case, a special little .exe file is available for the explicit purpose of replacing Notepad.If we run it from the desktop, it opens up Notepad++ in all its glory. Back up Notepad You will probably never go back once you switch, but you never know. You can backup Notepad to a special location if you’d like, but we find it’s easiest to just keep a backed up copy of Notepad in the folders it was originally located. In Windows 7, Notepad resides in: C:\Windows C:\Windows\System32 C:\Windows\SysWOW64 in 64-bit versions only Navigate to each of those directories and copy Notepad. Paste it into the same folder. If prompted, choose to Copy, but keep both files. You can keep your backup as “notepad (2).exe”, but we prefer to rename it to “notepad.exe.bak”. Do this for all of the folders that have Notepad (2 total for 32-bit Windows 7, 3 total for 64-bit). Take control of Notepad and delete it Even if you’re on an administrator account, you can’t just delete Notepad – Microsoft has made some security gains in this respect. Fortunately for us, it’s still possible to take control of a file and delete it without resorting to nasty hacks like disabling UAC. Navigate to one of the directories that contain Notepad. Right-click on it and select Properties.   Switch to the Security tab, then click on the Advanced button. Note that the owner of the file is a user called “TrustedInstaller”. You can’t do much with files owned by TrustedInstaller, so let’s take control of it. Click the Edit… button. Select the desired owner (you could choose your own account, but we’re going to give any Administrator control) and click OK. You’ll get a message that you need to close and reopen the Properties windows to edit permissions. Before doing that, confirm that the owner has changed to what you selected. Click OK, then OK again to close the Properties window. Right-click on Notepad and click on Properties again. Switch to the Security tab. Click on Edit…. Select the appropriate group or user name in the list at the top, then add a checkmark in the checkbox beside Full control in the Allow column. Click OK, then Yes to the dialog box that pops up. Click OK again to close the Properties window. Now you can delete Notepad, by either selecting it and pressing Delete on the keyboard, or right-click on it and click Delete.   You’re now free from Notepad’s foul clutches! Repeat this procedure for the remaining folders (or folder, on 32-bit Windows 7). Drop in your replacement Copy your Notepad replacement’s executable, which should still be on your desktop. Browse to the two or three folders listed above and copy your .exe to those locations. If prompted for Administrator permission, click Continue. If your executable file was named something other than “notepad.exe”, rename it to “notepad.exe”. Don’t be alarmed if the thumbnail still shows the old Notepad icon. Double click on Notepad and your replacement should open. To make doubly sure that it works, press Win+R to bring up the Run dialog box and enter “notepad” into the text field. Press enter or click OK. Now you can allow Windows to open files with Notepad by default with little to no shame! All without restarting or having to disable UAC! Similar Articles Productive Geek Tips Search and Replace Specific Formatting (fonts, styles,etc) in Microsoft WordHow to Drag Files to the Taskbar to Open Them in Windows 7Customize the Windows 7 or Vista Send To MenuKill Processes from the Windows Command LineChange Your Windows 7 Library Icons the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Use My TextTools to Edit and Organize Text Discovery Channel LIFE Theme (Win7) Increase the size of Taskbar Previews (Win 7) Scan your PC for nasties with Panda ActiveScan CleanMem – Memory Cleaner AceStock – The Personal Stock Monitor

  Read the article

• SQLAuthority News – Meeting with Allen Bailochan Tuladhar – An Unlimited Experience

  - by pinaldave

  Allen  Tuladhar I recently came back from my 9-day trip in Nepal and I must say that this is one of the best trips I had in my lifetime. Allen Bailochan Tuladhar is a wonderful person and an extreme enthusiast for Microsoft Technology. Allen is the Chief Executive Officer of Unlimited Technologies Pvt Ltd., Country Manager of Microsoft MDP Nepal, the Member Secretary of Nepali Language in Information Technology, and member of the Steering Committee of the Government of Nepal. He is the person who keeps the Nepal’s Tech Community constantly motivating and taking it to the next level. I have met Allen for many times before, but this was the first time I was with him in Kathmandu, Nepal. I was very impressed with the amount of the work he does in the community. During my 9 days of stay, every single day was a new lesson for me. I was amazed and overwhelmed with the many things he does every single day. Not only he does he work closely with Government of Nepal ministry, but he is also the most known person in the Student Community. His expertise in the technical subject matter is not limited to one technology; rather, I have seen him actively engaging himself in  discussions of various tech topics. Allen presending at TechMela Kathmandu, Nepal Allen is currently active in working out to localize Windows and Office and incorporate it using the Nepali language. I was able to witness and experience how the localization works, as well as the procedure on how to do such. If you know the whole localization process, you must have realized how big and daunting of a process it is. I was glad that I became a part of it. Prominent Personality of Nepal on Panel Discussion Another great opportunity I had when I was at Allen’s office is that I have learned how the radio technology talk show works. Nepali Radio station has the weekly program in their local language, in which MS technology is discussed and industry leaders are invited to talk about their experience with the technology. I found the program so interesting because it has so much variety in terms of technology subjects. Well, my understanding of Nepali language is limited but I did understand quite a bit. Ravi, Nutan, Pinal, Gandip I got the chance to meet lots of Database Professionals as well. People in Nepal are very polite even though they are very strong in their technology fundamentals. I had in-depth discussion regarding High Availability scenarios, as well Query Tuning. Database professionals from the leading financial sectors of Nepal wanted me to visit their Data Center and help them out with a few advances. In no time, Allen organized a visit for me. He sent me a Nepali-speaking expert from his own organization to accompany me in overcoming any difficulties while I was on my way helping this financial district. Pinal (SQLAuthority) and Deependra (Unlimited) When I was going to Nepal, I was really not sure if I would be able to stay busy for 9 days straight in Community-related activity. However, on the 9th day I realize that I can still stay here for more than 9 days because in every single day, I feel enthusiastic enough to do something new. Allen Bailochan Tuladhar Even though I was working  very hard every day, I hardly had the chance to work with and talk to him one-on-one for the first few days. One of the evenings, Allen invited me to his home and we discussed about his future ideas. I was really surprised to see how much a man can do for his technical community and for his country. When I asked Allen’s wife and daughter if they ever think it’s getting too much with regards to Allen putting tough efforts to the community, their answer was something I did not expect. I found out that Allen’s wife manages all the back office and logistics of the community events and his daughter manages the websites. I felt that they do not have any complain,  and instead, their whole family is in this activity as deeply as it can get, which I thought is a very good thing. Pinal and Allen I want to end this post with an interesting story that happened during our lunch hour at one of the Nepali restaurants. While we were having our lunch and having some chitchat, Allen suddenly stood up and called several people walking along the pavement. He introduced them all to me as Microsoft Student Partners. He asked all of them to order their favorite dish and called the waiter to inform that he will pick up their tab. Figuring out the question written on my face, he just said one sentence: “They are all future technology professionals who are going to make all of us proud.” I guess I have a lot of things to learn. Hats off to Allen! Pinal and Allen at Microsoft MDP Unlimited Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: MVP, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, T SQL, Technology

  Read the article

• Forcing an External Activation with Service Broker

  - by Davide Mauri

  In these last days I’ve been working quite a lot with Service Broker, a technology I’m really happy to work with, since it can give a lot of satisfaction. The scale-out solution one can easily build is simply astonishing. I’m helping a company to build a very scalable and – yet almost inexpensive – invoicing system that has to be able to scale out using commodity hardware. To offload the work from the main server to satellite “compute nodes” (yes, I’ve borrowed this term from PDW) we’re using Service Broker and the External Activator application available in the SQL Server Feature Pack. For those who are not used to work with SSB, the External Activation is a feature that allows you to intercept the arrival of a message in a queue right from your application code. http://msdn.microsoft.com/en-us/library/ms171617.aspx (Look for “Event-Based Activation”) In order to make life even more easier, Microsoft released the External Activation application that saves you even from writing even this code. http://blogs.msdn.com/b/sql_service_broker/archive/tags/external+activator/ The External Activator application can be configured to execute your own application so that each time a message – an invoice in my case – arrives in the target queue, the invoking application is executed and the invoice is calculated. The very nice feature of External Activator is that it can automatically execute as many configured application in order to process as many messages as your system can handle.  This also a lot of create a scale-out solution, leaving to the developer only a fraction of the problems that usually came with asynchronous programming. Developers are also shielded from Service Broker since everything can be encapsulated in Stored Procedures, so that – for them – developing such scale-out asynchronous solution is not much more complex than just executing a bunch of Stored Procedures. Now, if everything works correctly, you don’t have to bother of anything else. You put messages in the queue and your application, invoked by the External Activator, process them. But what happen if for some reason your application fails to process the messages. For examples, it crashes? The message is safe in the queue so you just need to process it again. But your application is invoked by the External Activator application, so now the question is, how do you wake up that app? Service Broker will engage the activation process only if certain conditions are met: http://msdn.microsoft.com/en-us/library/ms171601.aspx But how we can invoke the activation process manually, without having to wait for another message to arrive (the arrival of a new message is a condition that can fire the activation process)? The “trick” is to do manually with the activation process does: sending a system message to a queue in charge of handling External Activation messages: declare @conversationHandle uniqueidentifier; declare @n xml = N' <EVENT_INSTANCE>   <EventType>QUEUE_ACTIVATION</EventType>   <PostTime>' + CONVERT(CHAR(24),GETDATE(),126) + '</PostTime>   <SPID>' + CAST(@@SPID AS VARCHAR(9)) + '</SPID>   <ServerName>[your_server_name]</ServerName>   <LoginName>[your_login_name]</LoginName>   <UserName>[your_user_name]</UserName>   <DatabaseName>[your_database_name]</DatabaseName>   <SchemaName>[your_queue_schema_name]</SchemaName>   <ObjectName>[your_queue_name]</ObjectName>   <ObjectType>QUEUE</ObjectType> </EVENT_INSTANCE>' begin dialog conversation     @conversationHandle from service        [<your_initiator_service_name>] to service          '<your_event_notification_service>' on contract         [http://schemas.microsoft.com/SQL/Notifications/PostEventNotification] with     encryption = off,     lifetime = 6000 ; send on conversation     @conversationHandle message type     [http://schemas.microsoft.com/SQL/Notifications/EventNotification] (@n) ;     end conversation @conversationHandle; That’s it! Put the code in a Stored Procedure and you can add to your application a button that says “Force Queue Processing” (or something similar) in order to start the activation process whenever you need it (which should not occur too frequently but it may happen). PS I know that the “fire-and-forget” (ending the conversation without waiting for an answer) technique is not a best practice, but in this case I don’t see how it can hurts so I decided to stay very close to the KISS principle []

  Read the article

• Pre-filtering and shaping OData feeds using WCF Data Services and the Entity Framework - Part 2

  - by rajbk

  In the previous post, you saw how to create an OData feed and pre-filter the data. In this post, we will see how to shape the data. A sample project is attached at the bottom of this post. Pre-filtering and shaping OData feeds using WCF Data Services and the Entity Framework - Part 1 Shaping the feed The Product feed we created earlier returns too much information about our products. Let’s change this so that only the following properties are returned – ProductID, ProductName, QuantityPerUnit, UnitPrice, UnitsInStock. We also want to return only Products that are not discontinued.  Splitting the Entity To shape our data according to the requirements above, we are going to split our Product Entity into two and expose one through the feed. The exposed entity will contain only the properties listed above. We will use the other Entity in our Query Interceptor to pre-filter the data so that discontinued products are not returned. Go to the design surface for the Entity Model and make a copy of the Product entity. A “Product1” Entity gets created.   Rename Product1 to ProductDetail. Right click on the Product entity and select “Add Association” Make a one to one association between Product and ProductDetails.   Keep only the properties we wish to expose on the Product entity and delete all other properties on it (see diagram below). You delete a property on an Entity by right clicking on the property and selecting “delete”. Keep the ProductID on the ProductDetail. Delete any other property on the ProductDetail entity that is already present in the Product entity. Your design surface should look like below:    Mapping Entity to Database Tables Right click on “ProductDetail” and go to “Table Mapping”   Add a mapping to the “Products” table in the Mapping Details.   After mapping ProductDetail, you should see the following.   Add a referential constraint. Lets add a referential constraint which is similar to a referential integrity constraint in SQL. Double click on the Association between the Entities and add the constraint with “Principal” set to “Product”. Let us review what we did so far. We made a copy of the Product entity and called it ProductDetail We created a one to one association between these entities Excluding the ProductID, we made sure properties were not duplicated between these entities  We added a ProductDetail entity to Products table mapping (Entity to Database). We added a referential constraint between the entities. Lets build our project. We get the following error: ”'NortwindODataFeed.Product' does not contain a definition for 'Discontinued' and no extension method 'Discontinued' accepting a first argument of type 'NortwindODataFeed.Product' could be found …" The reason for this error is because our Product Entity no longer has a “Discontinued” property. We “moved” it to the ProductDetail entity since we want our Product Entity to contain only properties that will be exposed by our feed. Since we have a one to one association between the entities, we can easily rewrite our Query Interceptor like so: [QueryInterceptor("Products")] public Expression<Func<Product, bool>> OnReadProducts() { return o => o.ProductDetail.Discontinued == false; } Similarly, all “hidden” properties of the Product table are available to us internally (through the ProductDetail Entity) for any additional logic we wish to implement. Compile the project and view the feed. We see that the feed returns only the properties that were part of the requirement.   To see the data in JSON format, you have to create a request with the following request header Accept: application/json, text/javascript, */* (easy to do in jQuery) The result should look like this: { "d" : { "results": [ { "__metadata": { "uri": "http://localhost.:2576/DataService.svc/Products(1)", "type": "NorthwindModel.Product" }, "ProductID": 1, "ProductName": "Chai", "QuantityPerUnit": "10 boxes x 20 bags", "UnitPrice": "18.0000", "UnitsInStock": 39 }, { "__metadata": { "uri": "http://localhost.:2576/DataService.svc/Products(2)", "type": "NorthwindModel.Product" }, "ProductID": 2, "ProductName": "Chang", "QuantityPerUnit": "24 - 12 oz bottles", "UnitPrice": "19.0000", "UnitsInStock": 17 }, { ... ... If anyone has the $format operation working, please post a comment. It was not working for me at the time of writing this.  We have successfully pre-filtered our data to expose only products that have not been discontinued and shaped our data so that only certain properties of the Entity are exposed. Note that there are several other ways you could implement this like creating a QueryView, Stored Procedure or DefiningQuery. You have seen how easy it is to create an OData feed, shape the data and pre-filter it by hardly writing any code of your own. For more details on OData, Google it with your favorite search engine :-) Also check out the one of the most passionate persons I have ever met, Pablo Castro – the Architect of Aristoria WCF Data Services. Watch his MIX 2010 presentation titled “OData: There's a Feed for That” here. Download Sample Project for VS 2010 RTM NortwindODataFeed.zip

  Read the article

• Hack Extension Files to Make Them Version-Compatible for Firefox

  - by Asian Angel

  A well known drawback in using Firefox is the problem with extension compatibility when a new major version is released. Whether it is for a new extension that you are trying for the first time or an old favorite we have a way to get those extensions working for you again. There are multiple reasons why you might want to choose this method to fix a non-compatible extension: You are uncomfortable with tweaking the “about:config” settings You prefer to maintain the original “about:config” settings in a pristine state and like having compatibility checking active You are looking to gain some “geek cred” Keep in mind that most extensions will work perfectly well with a new version of Firefox and simply have the “version compatibility number” problem. But once in a while there may be one that needs to have some work done on it by the extension’s author. The Problem Here is a perfect example of everyone’s least favorite “extension message”. This is the last thing that you need when all that you want is for your favorite extension (or a new one) to work on a fresh clean install. Note: This works nicely to “replace” non-compatible extensions already present in your browser if you are simply upgrading. Hacking the XPI File For this procedure you will need to manually download the extension to your hard-drive (right click on the extension’s “Install Button” and select “Save As”). Once you have done that you are ready to start hacking the extension. For our example we chose the “GCal Popup Extension”. The best thing to do is place the extension in a new folder (i.e. the Desktop or other convenient location) then unzip it just the same way that you would with any regular zip file. Once it is unzipped you will see the various folders and files that were in the “xpi file” (we had four files here but depending on the extension the number may vary). There is only one file that you need to focus on…the “install.rdf” file. Note: At this point you should move the original extension file to a different location (i.e. outside of the folder) so that it is no longer present. Open the file in “Notepad” so that you can change the number for the “maxVersion”. Here the number is listed as “3.5.*” but we needed to make it higher… Replacing the “5” with a “7” is all that we needed to do. Once you have entered your new “maxVersion” number save the file. At this point you will need to re-zip all of the files back into a single file. Make certain that you “create” a file with the “.zip file extension” otherwise this will not work. Once you have the new zip file created you will need to rename the entire file including the “file extension”. For our example we copied and pasted the original extension name. Once you have changed the name click outside of the “text area”. You will see a small message window like this asking for confirmation…click “Yes” to finish the process. Now your modified/updated extension is ready to install. Drag the extension into your browser to install it and watch that wonderful “Restart to complete the installation.” message appear. As soon as your browser starts you can check the “Add-ons Manager Window” and see the version compatibility numbers for the extension. Looking very very nice! And just like that your extension should be up and running without any problems. Conclusion If you are looking to try something new, gain some geek cred, or just want to keep your Firefox install as close to the original condition as possible this method should get those extensions working nicely for you again. Similar Articles Productive Geek Tips Make Firefox Extensions Compatible After Firefox Update Breaks Them For No Good ReasonCheck Extension Compatibility for Upcoming Firefox ReleasesFirefox 3.6 Release Candidate Available, Here’s How to Fix Your Incompatible ExtensionsHow To Force Extension Compatibility with Firefox 3.6+Test and Report Add-on Compatibility in Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more Download Microsoft Office Help tab

  Read the article

• Detecting Idle Time with Global Mouse and Keyboard Hooks in WPF

  - by jdanforth

  Years and years ago I wrote this blog post about detecting if the user was idle or active at the keyboard (and mouse) using a global hook. Well that code was for .NET 2.0 and Windows Forms and for some reason I wanted to try the same in WPF and noticed that a few things around the keyboard and mouse hooks didn’t work as expected in the WPF environment. So I had to change a few things and here’s the code for it, working in .NET 4. I took the liberty and refactored a few things while at it and here’s the code now. I’m sure I will need it in the far future as well. using System; using System.Diagnostics; using System.Runtime.InteropServices; namespace Irm.Tim.Snapper.Util { public class ClientIdleHandler : IDisposable { public bool IsActive { get; set; } int _hHookKbd; int _hHookMouse; public delegate int HookProc(int nCode, IntPtr wParam, IntPtr lParam); public event HookProc MouseHookProcedure; public event HookProc KbdHookProcedure; //Use this function to install thread-specific hook. [DllImport("user32.dll", CharSet = CharSet.Auto, CallingConvention = CallingConvention.StdCall)] public static extern int SetWindowsHookEx(int idHook, HookProc lpfn, IntPtr hInstance, int threadId); //Call this function to uninstall the hook. [DllImport("user32.dll", CharSet = CharSet.Auto, CallingConvention = CallingConvention.StdCall)] public static extern bool UnhookWindowsHookEx(int idHook); //Use this function to pass the hook information to next hook procedure in chain. [DllImport("user32.dll", CharSet = CharSet.Auto, CallingConvention = CallingConvention.StdCall)] public static extern int CallNextHookEx(int idHook, int nCode, IntPtr wParam, IntPtr lParam); //Use this hook to get the module handle, needed for WPF environment [DllImport("kernel32.dll", CharSet = CharSet.Auto)] public static extern IntPtr GetModuleHandle(string lpModuleName); public enum HookType : int { GlobalKeyboard = 13, GlobalMouse = 14 } public int MouseHookProc(int nCode, IntPtr wParam, IntPtr lParam) { //user is active, at least with the mouse IsActive = true; Debug.Print("Mouse active"); //just return the next hook return CallNextHookEx(_hHookMouse, nCode, wParam, lParam); } public int KbdHookProc(int nCode, IntPtr wParam, IntPtr lParam) { //user is active, at least with the keyboard IsActive = true; Debug.Print("Keyboard active"); //just return the next hook return CallNextHookEx(_hHookKbd, nCode, wParam, lParam); } public void Start() { using (var currentProcess = Process.GetCurrentProcess()) using (var mainModule = currentProcess.MainModule) { if (_hHookMouse == 0) { // Create an instance of HookProc. MouseHookProcedure = new HookProc(MouseHookProc); // Create an instance of HookProc. KbdHookProcedure = new HookProc(KbdHookProc); //register a global hook _hHookMouse = SetWindowsHookEx((int)HookType.GlobalMouse, MouseHookProcedure, GetModuleHandle(mainModule.ModuleName), 0); if (_hHookMouse == 0) { Close(); throw new ApplicationException("SetWindowsHookEx() failed for the mouse"); } } if (_hHookKbd == 0) { //register a global hook _hHookKbd = SetWindowsHookEx((int)HookType.GlobalKeyboard, KbdHookProcedure, GetModuleHandle(mainModule.ModuleName), 0); if (_hHookKbd == 0) { Close(); throw new ApplicationException("SetWindowsHookEx() failed for the keyboard"); } } } } public void Close() { if (_hHookMouse != 0) { bool ret = UnhookWindowsHookEx(_hHookMouse); if (ret == false) { throw new ApplicationException("UnhookWindowsHookEx() failed for the mouse"); } _hHookMouse = 0; } if (_hHookKbd != 0) { bool ret = UnhookWindowsHookEx(_hHookKbd); if (ret == false) { throw new ApplicationException("UnhookWindowsHookEx() failed for the keyboard"); } _hHookKbd = 0; } } #region IDisposable Members public void Dispose() { if (_hHookMouse != 0 || _hHookKbd != 0) Close(); } #endregion } } The way you use it is quite simple, for example in a WPF application with a simple Window and a TextBlock: <Window x:Class="WpfApplication2.MainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="MainWindow" Height="350" Width="525"> <Grid> <TextBlock Name="IdleTextBox"/> </Grid> </Window> And in the code behind we wire up the ClientIdleHandler and a DispatcherTimer that ticks every second: public partial class MainWindow : Window { private DispatcherTimer _dispatcherTimer; private ClientIdleHandler _clientIdleHandler; public MainWindow() { InitializeComponent(); } private void Window_Loaded(object sender, RoutedEventArgs e) { //start client idle hook _clientIdleHandler = new ClientIdleHandler(); _clientIdleHandler.Start(); //start timer _dispatcherTimer = new DispatcherTimer(); _dispatcherTimer.Tick += TimerTick; _dispatcherTimer.Interval = new TimeSpan(0, 0, 0, 1); _dispatcherTimer.Start(); } private void TimerTick(object sender, EventArgs e) { if (_clientIdleHandler.IsActive) { IdleTextBox.Text = "Active"; //reset IsActive flag _clientIdleHandler.IsActive = false; } else IdleTextBox.Text = "Idle"; } } Remember to reset the ClientIdleHandle IsActive flag after a check.

  Read the article

< Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >