Search Results

Search found 14836 results on 594 pages for 'resource manager'.

Page 136/594 | < Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >

• raid md device is not remove from memory, how to overcome this problem

  - by santhosha

  i create raid 10 , i removed two arrays form md11 one by one , after that i going to editing the contents those are mounted ( it will be not responding stage), after i try for remove arrays those are left it is shows device or resource busy ( is not removed from memory). i try to terminate process this is also not work, i absorve from 4 days resync will be 8.0% it can not modifying. cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec mdadm -D /dev/md11 /dev/md11: Version : 00.90.03 Creation Time : Sun Jan 16 16:20:01 2011 Raid Level : raid10 Array Size : 286743936 (273.46 GiB 293.63 GB) Device Size : 143371968 (136.73 GiB 146.81 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 11 Persistence : Superblock is persistent Update Time : Sun Jan 16 16:56:07 2011 State : active, degraded, resyncing Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K Rebuild Status : 8% complete UUID : 5e124ea4:79a01181:dc4110d3:a48576ea Events : 0.23 Number Major Minor RaidDevice State 0 0 0 0 removed 1 0 0 1 removed 4 8 145 2 faulty spare rebuilding /dev/sdj1 3 8 65 3 active sync /dev/sde1 umount /dev/md11 umount: /dev/md11: not mounted mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 kill -9 2128 kill -9 5018 kill -9 27605 kill -9 30562 kill -3 30591 mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec

  Read the article

• GlassFish cluster-targeted jdbc is not enabled

  - by Jin Kwon

  I have a GlassFish cluster. When I tried to add node and a instance, DAS saids a bunch of error messages telling Resource [ jdbc/xxxx ] of type [ jdbc ] is not enabled [#|2012-11-14T12:07:04.318+0900|SEVERE|glassfish3.1.2|javax.enterprise.system.core.com.sun.enterprise.v3.server|_ThreadID=2803;_ThreadName=Thread-2;|java.lang.StackOverflowError at java.io.FileOutputStream.writeBytes(Native Method) at java.io.FileOutputStream.write(FileOutputStream.java:318) at java.io.BufferedOutputStream.write(BufferedOutputStream.java:122) at java.io.PrintStream.write(PrintStream.java:480) at sun.nio.cs.StreamEncoder.writeBytes(StreamEncoder.java:221) at sun.nio.cs.StreamEncoder.implFlushBuffer(StreamEncoder.java:291) at sun.nio.cs.StreamEncoder.implFlush(StreamEncoder.java:295) at sun.nio.cs.StreamEncoder.flush(StreamEncoder.java:141) at java.io.OutputStreamWriter.flush(OutputStreamWriter.java:229) at java.util.logging.StreamHandler.flush(StreamHandler.java:242) at java.util.logging.ConsoleHandler.publish(ConsoleHandler.java:106) at java.util.logging.Logger.log(Logger.java:522) at com.sun.logging.LogDomains$1.log(LogDomains.java:372) at java.util.logging.Logger.doLog(Logger.java:543) at java.util.logging.Logger.log(Logger.java:607) at com.sun.enterprise.resource.deployer.JdbcResourceDeployer.deployResource(JdbcResourceDeployer.java:117) at org.glassfish.javaee.services.ResourceProxy.create(ResourceProxy.java:90) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:507) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:455) at javax.naming.InitialContext.lookup(InitialContext.java:411) at javax.naming.InitialContext.lookup(InitialContext.java:411) at com.sun.appserv.connectors.internal.api.ResourceNamingService.lookup(ResourceNamingService.java:221) the JDBC Resource is ok and targeted with the cluster. I've installed the JDBC driver on the new node. Can anybody help?

  Read the article

• OS X Client & Ubuntu Server - Best way for client to access files on server?

  - by Camsoft

  I've got a local development web server running Ubuntu. I also have an iMac running OS X 10.6 which I use a client and is my development machine. I'm currently have Samba server installed on my Ubuntu server. I have shares setup for all the website directories. I then use my Mac and Coda to edit the files via their shares. This generally works really well but I noticed that my Mac was writing loads of resource fork ._filename files everywhere. I found out the following about the files: These files are created on volumes that don't natively support full HFS file characteristics (e.g. ufs volumes, Windows fileshares, etc). When a Mac file is copied to such a volume, its data fork is stored under the file's regular name, and the additional HFS information (resource fork, type & creator codes, etc) is stored in a second file (in AppleDouble format), with a name that starts with "._". (These files are, of course, invisible as far as OS-X is concerned, but not to other OS's; this can sometimes be annoying...) Does anyone know of a way of sharing files between a Mac client and a Linux server that is most compantable between the two operation systems? Ideally it needs to support the HFS filesystem so that the resource forks are not created and it also needs to support the permissions between server and client.

  Read the article

• unable to destroy windows 2008 r2 failover cluster after SAN rebuild

  - by Zack

  I created a windows 2008 r2 failover cluster for a sql 2008 active/passive cluster. This two node cluster was using a SAN device for a quorum disk resource as well as MSDTC resource. Well....I decided to reconfigure the SAN device, but I didn't destroy the cluster first. Now that the quorum disk and mstdc disk are completely gone, the cluster is obviously not working. But, I can't even destroy the cluster and start again. I've tried from the Windows Clustering tool, as well as the command line. I was able to get the cluster service to start using the "/fixquorum" parameter. After doing this I was able to remove the passive node from the cluster, but it wouldn't let me destroy the cluster because the default resource group and msdtc are still attached as resources. I tried to delete these resources from both the GUI tool, as well as command line. It will either freeze for several minutes and crash the program, or once it even BSOD'd the server. Can someone advise on how to destroy this cluster so I can start over?

  Read the article

• Calendar booking issue - Exchange 2003 and 2010

  - by NaOH

  In our organization we are running Exchange 2003 and 2010 simultaneously, with the hopes of migrating everyone to Exchange 2010 sometime within the next few months. Everyone is using Outlook 2010. Recently, we had an issue with transaction log storage on the Exchange 2003 server. This was resolved, but for some reason no meeting rooms on the Exchange 2003 server will automatically book meetings any longer. I have played around with this for a while, changing calendar permissions, turning resource scheduling off and back on, etc. No dice. My next step was to try migrating a resource to the Exchange 2010 server. After doing so, and setting it up as a Room, enabling Auto-Accept and removing the EnableDirectBooking registry entry on my PC, I can book a meeting with this room. If EnableDirectBooking is enabled, I get an error message stating: "Meeting Room" declined your meeting because it is recurring. You must book each meeting separately with this resource. This is despite the fact that the meeting I'm attempting to create has no recurrence. Now, I have also created a new test Room from scratch on the Exchange 2010 server, and I can book a meeting with this Room regardless of whether or not I have the EnableDirectBooking reg entry in place. All users here have this registry entry, and I'd rather not have to figure out how to push something out to remove it from every PC. Rather, I'd like to figure out what's different between the configurations of these two meeting rooms so that I could book a meeting room regardless of whether EnableDirectBooking is enabled or not. Any ideas, anyone? Thanks!

  Read the article

• Intermittent Trouble Entering Hibernate on WinXP

  - by kquinn

  My personal desktop, running 32-bit Windows XP SP2 (with 4GB RAM, 2.75GB addressable, swap disabled, hiberfil.sys existing and contiguous on C:\; SP3 is not installed because SP2 has been working fine and I do not want to re-qualify with SP3 just for sheer perversity) typically gets hibernated at night. For a long time this worked great, but recently the machine has had trouble entering hibernation. Sometimes when I press my power button (configured to hibernate), the box will start the procedure for hibernating (i.e., go to the blue "Windows XP" background logo and display a message about entering hibernation), but before displaying the usual blue-on-black hibernation progress bar it will drop back to the desktop. No error messages appear, on screen or in the system log. The only record of unsuccessful hibernation attempts in the system log, which proudly proclaims that "The Windows Image Acquisition (WIA) service entered the running state." once per failed hibernation attempt. The problem is almost certainly resource related: if I then close one or more applications which are running, and repeat the exact same process, the machine will hibernate perfectly. There does not appear to be a reliable high-water mark for virtual or physical memory use, below which the machine is guaranteed to hibernate; it's different every time (though typically, below about 1.1–1.4 GB memory usage seems to be where hibernate succeeds most often). Memory may not even be the relevant resource; as far as I know, it could also be handles or sockets. This behavior is relatively recent: it has only started in the last few months; before then, I could hibernate reliably no matter what the current resource use of the system. This machine claims to have hotfix Q909095 installed, but since the symptoms of my problem match KB909095 rather well, I'm suspicious if this fix is actually working as intended. Any ideas on how to fix this or where to start debugging?

  Read the article

• What is causing sudden freezing during running real-time program?

  - by Trevor Boyd Smith

  So I run a high intensive (CPU/GPU) real-time program. During normal execution suddenly everything freezes for 1-4 seconds. I opened "Process Explorer" in the background to help gain insight and maybe identify something. Here is what the CPU/GPU graphs looks like when I align them in time: Notice the 4 distinct drops in both the CPU/GPU. You can see that it goes from some sort of positive CPU/GPU usage to almost zero. These drops in the graph align with when the real-time program suddenly freezes. How do I find what is causing these sudden drops? NOTE: When you put your mouse over the graph it tells you the time, accurate to the second, for where your cursor is. Maybe this mouse over feature could be helpful in some way (e.g. what if you had a log of all processes every 100ms). EDIT: The real-time program is a video game and so I can't watch some sort of instrumentation while the video game is running. I need a solution that let's you look back in time somehow to see what was happening when the slow down occurred. EDIT: RE - Recording Data vs using real-time monitor: So the windows performance recorder is for some reason not recording what I expect it to record. So I switched to using "perfmon" and then opening it's "resource monitor". RE - Setting it up so I can view real-time monitor: In the video game I set it to spectate and then put the video game in "windowed" mode so that I can view the real time display that Resource Monitor has. Now that I can get semi-real time (only once per second... how do you get more than once per second?) I started looking at the various real time data readouts. Getting to the cause: I noticed a strong correlation in high disk IO and low CPU usage (which is also seen by having in-game freezing). How do you use resource monitor to find out who is doing all this offending disk IO?

  Read the article

• How to make project auto-estimate duration based on work?

  - by Bruno Brant

  This one has bothered me for a long while. I like to do estimates thinking on how much time a certain task will take (I'm in TI business), so, let's say, it takes 12 hours to build a program. Now, let's say I tell Project that my beginning date is today. If I allocate one resource to this task, it means that the task will last 1,5 days, implying that it will end tomorrow. But right now, that is not what it's doing. I say that the task will take 1 hour, and when I add a resource to it, it allocate the resource at [13%] basis, which means that the duration is still fixed... project is trying to make the task last for a day. I have, on many occasions, accomplished this. What I do is build a plan based on these rough estimates for effort, then I allocate tasks to resources. Times conflict, so I level resources and then Project magically tells me how long, in days, will it take. But every time I have to start estimating again, I end up having trouble on how to make project work like that.

  Read the article

• arrays in puppet

  - by paweloque

  I'm wondering how to solve the following puppet problem: I want to create several files based on an array of strings. The complication is that I want to create multiple directories with the files: dir1/ fileA fileB dir2/ fileA fileB fileC The problem is that the file resource titles must be unique. So if I keep the file names in an array, I need to iterate over the array in a custom way to be able to postfix the file names with the directory name: $file_names = ['fileA', 'fileB'] $file_names_2 = [$file_names, 'fileC'] file {'dir1': ensure => directory } file {'dir2': ensure => directory } file { $file_names: path = 'dir1', ensure =>present, } file { $file_names_2: path = 'dir2', ensure =>present, } This wont work because the file resource titles clash. So I need to append e.g. the dir name to the file title, however, this will cause the array of files to be concatenated and not treated as multiple files... arghh.. file { "${file_names}-dir1": path = 'dir1', ensure =>present, } file { "${file_names_2}-dir2": path = 'dir1', ensure =>present, } How to solve this problem without the necessity of repeating the file resource itself. Thanks

  Read the article

• Stepmania + KDE4 = sound problem

  - by picca

  I cannot manage to get KDE4 + stepmania working. If I run StepMania I always get: StepMania 3.9 Log starting 2010-12-24 14:52:48 Loading window: gtk OS: Linux ver 020636 Crash backtrace component: x86 custom backtrace Crash lookup component: dladdr Crash demangle component: cxa_demangle Runtime library: glibc 2.11.2 Threads library: NPTL 2.11.2 TLS is available ALSA: Advanced Linux Sound Architecture Driver Version 1.0.23. ALSA Driver: 0: HDA ATI SB [SB], device 0: STAC92xx Analog [STAC92xx Analog], 0/1 subdevices avail ALSA Driver: 0: HDA ATI SB [SB], device 1: STAC92xx Digital [STAC92xx Digital], 1/1 subdevices avail Couldn't load driver ALSA: dsnd_pcm_open(hw:0): Device or resource busy Mixing 0.000000 ahead in 0 Mix() calls Couldn't load driver ALSA-sw: dsnd_pcm_open(hw:0): Device or resource busy Mixing 0.000000 ahead in 0 Mix() calls Couldn't load driver OSS: RageSound_OSS: Couldn't open /dev/dsp: Device or resource busy Language: english Theme: default Error: Couldn't find a sound driver that works I found that in StepMania/Data/StepMania.ini I should add following line: SoundDevice=default That enables me to run StepMania, but I don't have any sound. Which is pretty bad for an application like this one. I'm quite sure that the problem is in phonon that is blocking the audio device to which StepMania needs to access directly. I think that I can fix this if I run other (lighter) window-manager than KDE4. But that is not a solution occasional linux user. Do I have any chance to get StepMania under KDE4 completely working?

  Read the article

• Install Exchange 2013 with DSC

  - by Alain Laventure

  I tried to install Exchange 2013 with the resource windowsProcess in existing Exchange Configuration. All prerequisites are installed (the Exchange Organization still exists). This is my Resource section: WindowsProcess Exchange2013 { Credential=$credential Path= "C:\Sources\Cumulative Update 5 for Exchange Server 2013 (KB2936880)\Setup.exe" Arguments= "/mode:Install /role:Mailbox /IAcceptExchangeServerLicenseTerms /TargetDir:C:\EX2013" Ensure= "Present" } #End Filter } #End Node } # End configuration /* @TargetNode='TargetDSC02' @GeneratedBy=exadmin @GenerationDate=08/02/2014 08:16:03 @GenerationHost=SOURCEDSC02 */ instance of MSFT_Credential as $MSFT_Credential1ref { Password = "Password1"; UserName = "S05\\Exadmin"; }; Exadmin is a member of Orgaganization Management Group and it is also member of Domain Admin Group, to be able to install Exchange When I execute this resource , Exchange Installation Start but after 1 minute the installation stops with this error: Failed [Rule:GlobalServerInstall] [Message:You must be a member of the 'Organization Management' role group or a member of the 'Enterprise Admins' group to continue.] To be sure that the right is really the problem I create a special User with only Administrator right of the Exchange server and with no Exchange Permission I run manually on the new Exchange server .\Setup.exe /mode:Install /role:Mailbox /IAcceptExchangeServerLicenseTerms /Targetdir:C:\EX2013 And I got the Same error that with DSC. After I add my test user in the Organization Management Group and I run again manually .\Setup.exe /mode:Install /role:Mailbox /IAcceptExchangeServerLicenseTerms /Targetdir:C:\EX2013 And the Exchange 2013 installation finish without any error. That prove that the problem with DSC is Permission right.

  Read the article

• Can mod-rewrite be used to set environmental variables?

  - by VLostBoy

  Hi, I've got an existing simple rewrite rule like so: <Directory /path> RewriteEngine on RewriteBase / # if the requested resource does not exist RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d # route the uri to a front controller RewriteRule ^(.*)$ index.php/$1 [L] </Directory> This works fine, but I want to do one of either two things. On the basis of detecting the clients accept-language header, I want to either (i) Set the detected language as an environmental variable that the script can use or (ii)Rewrite the request so that the url begins with the language code (e.g. www.example.com/en/some/resource) In terms of implementing (i), I defined this rule: <Directory /path> RewriteEngine on RewriteBase / # if the requested resource does not exist RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d # if the users preferred language is supported... RewriteCond %{HTTP:Accept-Language} ^.*(de|es|fr|it|ja|ru|en).*$ [NC] # define an environmental variable PREFER_LANG RewriteRule ^(.*)$ - [env=PREFER_LANG:%1] # route the uri to a front controller RewriteRule ^(.*)$ index.php/$1 [L] </Directory> I've tried a few variations, but PREFER_LANG is not defined in $_SERVER nor retrievable by getenv. In terms of implementing (ii)... lets just say its messy. I'll post it if I can't get an answer to one. Can anyone advise me? Thanks!

  Read the article

• No access to Windows 2003 admin shares

  - by ARomo

  This is the environment: Several Win 2003 SP 2 servers and several Win XP SP2 & SP3 clients. All in the same LAN. Firewall is disabled everywhere. No recent Windows updates or configuration changes. This is the problem: Since last Thursday, I log on to any other server or workstation as any regular (non-admin) user and I fail to be able to open ADMIN SHARES ONLY (namely \\server1\c$, \\server1\e$ and \\server1\admin$). The error message is: "\server1\c$ is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again." I can, however, open the same shares if I use FQDN or IP address: \\server1.domain.local\c$ \\172.0.0.1\c$ Other shares do not have this issue and I can open them without any issue. Any ideas or suggestion would be truly appreciated. Thank you in advance.

  Read the article

• Missing Memory on Windows Server 2008

  - by Chris Lively

  I have a windows 2008 x64 server with 8GB of RAM installed. Task Manager and Resource Monitor both insist that 7.5GB of the RAM is in use. However, the memory list under Processes (Memory Private Bytes) doesn't add up. I do have Show Processes from all users checked and hand adding the numbers I come up with about 3.5GB of RAM. I also looked at the latest copy of SysInternals Process Explorer. And neither the Private Bytes or Working Set adds up to more than about 3.5GB of RAM in use. What's going on? ===== Update: I bounced the server to see what would happen with the memory utilization. After boot and regular operations began it sat at 3GB of RAM usage. 18 hours later, it's back up to 6.8GB of usage with no indication as to where the additional 3.5GB or so of RAM is being used. Here are links to screen shots of the resource monitor and task manager: Resource Monitor Task Manager Update 2: Well, I believe I located the problem. When I detached one of the larger databases from my sql server the amount of ram shown as "in use" dropped drastically. The Memory Private Bytes count barely moved. So I'm guessing that SQL server has some way of allocating memory where it doesn't really show up in any of the monitors. I went further and created a new database file, then transferred all of the data from the one I detached. Even though it has the same data, and the same transactions going through it, the memory in use has stayed low. Maybe there was some corruption in the DB? I'll leave it to the DB gods and go searching for another "problem" ;)

  Read the article

• vSphere education - What are the downsides of configuring virtual machines with *too* much RAM?

  - by ewwhite

  VMware memory management seems to be a tricky balancing act. With cluster RAM, Resource Pools, VMware's management techniques (TPS, ballooning, host swapping), in-guest RAM utilization, swapping, reservations, shares and limits, there are a lot of variables. I'm in a situation where clients are using dedicated vSphere cluster resources. However, they are configuring the virtual machines as though they were on physical hardware. In turn, this means a standard VM build may have 4 vCPUs and 16GB or more of RAM. I come from the school of starting small (1 vCPU, minimal RAM), checking real-world use and adjusting up as necessary. Some examples from a "problem" cluster. Resource pool summary - Looks almost 4:1 overcommitted. Note the high amount of ballooned RAM. Resource allocation - The Worst Case Allocation column shows that these VMs would have access to less than 50% of their configured RAM under constrained conditions. The real-time memory utilization graph of the top VM in the listing above. 4 vCPU and 64GB RAM allocated. It averages under 9GB use. Summary of the same VM What are the downsides of overcommitting and overconfiguring resources (specifically RAM) in vSphere environments? Assuming that the VMs can run in less RAM, is it fair to say that there's overhead to configuring virtual machines with more RAM than they need? What is the counter-argument to: "if a VM has 16GB of RAM allocated, but only uses 4GB, what's the problem??"? E.g. do customers need to be educated? What specific metric should be used to meter RAM usage. Tracking the peaks of "Active" versus time?

  Read the article

• cygwin fork error

  - by Techie Help

  I have set up a new PC and installed cygwin on it. Its windows 7 pro. Whenever I try to build our application on it, I get the following error: 0 [main] sh 3472 child_info_fork::abort: can't commit memory for stack 0x28A000(90112), Win32 error 487 /bin/sh: fork: retry: Resource temporarily unavailable 0 [main] sh 3220 child_info_fork::abort: can't commit memory for stack 0x28A000(90112), Win32 error 487 /bin/sh: fork: retry: Resource temporarily unavailable 0 [main] sh 4896 child_info_fork::abort: can't commit memory for stack 0x28A000(90112), Win32 error 487 /bin/sh: fork: retry: Resource temporarily unavailable 0 [main] sh 4884 child_info_fork::abort: can't commit memory for stack 0x28A000(90112), Win32 error 487 It prints this few times and then dies. I have already done a lot of research on this problem. I have already uninstalled and installed cygwin more than 5 times. Done rebaseall everytime I installed it. Checked for possible BLODA, I had notron antivirus, which I have removed. As an aside, I tried posting this question to cygwin mailing list after subscribing to it. But my mail does not appear on the list. I suppose they want address to be munged and I have no clue how to do it. supposedly, they are treating it as a spam. Any idea how I can post to the mailing list there.

  Read the article

• Spring security custom ldap authentication provider

  - by wuntee

  I currently have my ldap authentication context set up like this: <ldap-server url="ldap://host/dn" manager-dn="cn=someuser" manager-password="somepass" /> <authentication-manager> <ldap-authentication-provider user-search-filter="(samaccountname={0})"/> </authentication-manager> Now, I need to be able to set up a custom authorities mapper (it uses a different ldap server) - so I am assuming I need to set up my ldap-server similar to (http://static.springsource.org/spring-security/site/docs/2.0.x/reference/ldap.html): <bean id="ldapAuthProvider" class="org.springframework.security.providers.ldap.LdapAuthenticationProvider"> <constructor-arg> <bean class="org.springframework.security.providers.ldap.authenticator.BindAuthenticator"> <constructor-arg ref="contextSource"/> <property name="userDnPatterns"> <list><value>uid={0},ou=people</value></list> </property> </bean> </constructor-arg> <constructor-arg> <bean class="org.springframework.security.ldap.populator.DefaultLdapAuthoritiesPopulator"> <constructor-arg ref="contextSource"/> <constructor-arg value="ou=groups"/> <property name="groupRoleAttribute" value="ou"/> </bean> </constructor-arg> </bean> But, how do I reference that 'ldapAuthProvider' to the ldap-server in the security context? I am also using spring-security 3, so '' does not exist...

  Read the article

• Definition of the job titles involved in a software development process.

  - by Rafael Romão

  I have seen many job titles for people involved in a software development process, but never found a consensus about they mean. I know many of them are equivalent, and found some other questions about that here in SO, but I would like to know your definitions and comments about them. I want not only to know if there is really a consensus, but also to know if what I suppose to be a Software Architect, is really a Software Architect, and so on. The job titles I mean are: Developer; System Analyst; Programmer; Analyst Programmer; Software Engineer; Software Architect; Designer; Software Designer; Business Manager; Business Analyst; Program Manager; Project Manager; Development Manager; Tester; Support Analyst; Please, feel free to add more titles to this list in your answers. It would be very helpful.

  Read the article

• Using Mapping Models to migrate between Core Data Object Models

  - by westsider

  I have a fairly simply scheme. Essentially, Run <-- Data (where a Run holds a data, e.g., Temperature, sampled from some sort of sensor). Now, it seems that sensors can have more than one measurement (e.g., Temperature and Humidity). So, a single Run could have multiple data samples. Hence, Run <-- Sample and Sample <-- Data. (And for simplicity I am leaving Run <-- Data in place, for now.) If I create a new mapping model, then things generally work - except that no new Samples are created, no relationships are established between Runs and Samples nor between Samples and Datas. I am trying to get mapping model to migrate my model but even the slightest change to the generated mapping model results in Cocoa error 134110. For example, if I take the "Sample" mapping (which has no Source) and set its Source to 'Run' (so that I can set Sample's inverse relationship 'run' appropriately) then the mapping changes its name to "RunToSample". There are two relationships handled in this mapping: data and run. The data property gets set automatically to FUNCTION($manager, "destinationInstancesForEntityMappingNamed:sourceInstances:" , "DataToData", $source.dataSet) Following this example, I set the run property to FUNCTION($manager, "destinationInstancesForEntityMappingNamed:sourceInstances:" , "RunToRun", $source) Similarly, I set the 'sample' property mapping in RunToRun to FUNCTION($manager, "destinationInstancesForEntityMappingNamed:sourceInstances:" , "RunToSample", $source) and the 'sample' property in DataToData to FUNCTION($manager, "destinationInstancesForEntityMappingNamed:sourceInstances:" , "RunToSample", $source.run) So, what, I wonder, is going wrong? I have tried various permutations, such as leaving the 'inverse' relationships unspecified. But I continue to get the same error (134110) regardless. I imagine that this is a lot easier than it seems and that I am missing some fundamental but minor piece. I have also tried subclassing NSEntityMigrationPolicy and overriding -createDestinationInstancesForSourceInstance: but these efforts have met with much the same results. Thanks in advance for any pointers or (relevant :-) advice.

  Read the article

• Error displaying a WinForm in Design mode with a custom control on it.

  - by George

  I have a UserControl that is part of a Class library. I reference this project from my solution. This adds a control from the referenced project to my toolbox. I add tghe control to a form. Everything looks good, I compile all and run. Perfect... But when I close the .frm with the control on it and re-open it, I get this error. The code continues to run. It may have something to do with namespaces. The original namespace was simply "Design" and this was ambiguous and conflicting so i decided to rename it. I think that's when my problems began. To prevent possible data loss before loading the designer, the following errors must be resolved: 2 Errors Ignore and Continue Why am I seeing this page? Could not find type 'Besi.Winforms.HtmlEditor.Editor'. Please make sure that the assembly that contains this type is referenced. If this type is a part of your development project, make sure that the project has been successfully built using settings for your current platform or Any CPU. Instances of this error (1) 1. There is no stack trace or error line information available for this error. Help with this error Could not find an associated help topic for this error. Check Windows Forms Design-Time error list Forum posts about this error Search the MSDN Forums for posts related to this error The variable 'Editor1' is either undeclared or was never assigned. Go to code Instances of this error (1) 1. BesiAdmin frmOrder.Designer.vb Line:775 Column:1 Show Call Stack at System.ComponentModel.Design.Serialization.CodeDomSerializerBase.Error(IDesignerSerializationManager manager, String exceptionText, String helpLink) at System.ComponentModel.Design.Serialization.CodeDomSerializerBase.DeserializeExpression(IDesignerSerializationManager manager, String name, CodeExpression expression) at System.ComponentModel.Design.Serialization.CodeDomSerializerBase.DeserializeExpression(IDesignerSerializationManager manager, String name, CodeExpression expression) at System.ComponentModel.Design.Serialization.CodeDomSerializerBase.DeserializeStatement(IDesignerSerializationManager manager, CodeStatement statement) Help with this error MSDN Help Forum posts about this error Search the MSDN Forums for posts related to this error

  Read the article

• How to get child container reference in View Model

  - by niels-verkaart

  Hello, I´m trying to share a Data Service (Entity Manager) wrapped in a Repository from a ViewModel (called 'AVM') in Module A to a ViewModel (called 'BVM') in Module B, and I can't get this working. We use PRISM/Unity 2.0 This is my scenario: A user may open multiple Customer screens (composite view as mini shell) each with another customer (unit of work). We realize this using child containers. Each child container resolves it's own repository with its own Entity manager (the repository is a singleton within the child container). This is done in module A. The main shell has a main region manager, and each Customer screen with its childcontainer creates a scoped region. In each customer screen there is a View 'AV' (connected to ViewModel 'AVM') with a SubRegion (tab control) registered as 'SubRegion'. We create this with a 'Screen Factory' In Module B we have a Customer Orders in View 'BV' and ViewModel 'BVM'. In the constructor of Module B we get the main container by injection. In the initialize method we resolve the (main) region manager and register View 'BV' with it. In the constructor of View 'BV' a ViewModel 'BVM' is injected/created. Now this works, but the ViewModel 'BVM' cannot get the child container. It only get the main container. Is this doable, or do I have to do this another way? Thanks, Niels

  Read the article

• Is it possible that a single-threaded program is executed simultaneously on more than one CPU core?

  - by Wolfgang Plaschg

  When I run a single-threaded program that i have written on my quad core Intel i can see in the Windows Task Manager that actually all four cores of my CPU are more or less active. One core is more active than the other three, but there is also activity on those. There's no other program (besided the OS kernel of course) running that would be plausible for that activitiy. And when I close my program all activity an all cores drops down to nearly zero. All is left is a little "noise" on the cores, so I'm pretty sure all the visible activity comes directly or indirectly (like invoking system routines) from my program. Is it possible that the OS or the cores themselves try to balance some code or execution on all four cores, even it's not a multithreaded program? Do you have any links that documents this technique? Some infos to the program: It's a console app written in Qt, the Task Manager states that only one thread is running. Maybe Qt uses threads, but I don't use signals or slots, nor any GUI. Link to Task Manager screenshot: http://img97.imageshack.us/img97/6403/taskmanager.png This question is language agnostic and not tied to Qt/C++, i just want to know if Windows or Intel do to balance also single-threaded code on all cores. If they do, how does this technique work? All I can think of is, that kernel routines like reading from disk etc. is scheduled on all cores, but this won't improve performance significantly since the code still has to run synchronous to the kernel api calls. EDIT Do you know any tools to do a better analysis of single and/or multi-threaded programs than the poor Windows Task Manager?

  Read the article

• Why is curl in Ruby slower than command-line curl?

  - by Stiivi

  I am trying to download more than 1m pages (URLs ending by a sequence ID). I have implemented kind of multi-purpose download manager with configurable number of download threads and one processing thread. The downloader downloads files in batches: curl = Curl::Easy.new batch_urls.each { |url_info| curl.url = url_info[:url] curl.perform file = File.new(url_info[:file], "wb") file << curl.body_str file.close # ... some other stuff } I have tried to download 8000 pages sample. When using the code above, I get 1000 in 2 minutes. When I write all URLs into a file and do in shell: cat list | xargs curl I gen all 8000 pages in two minutes. Thing is, I need it to have it in ruby code, because there is other monitoring and processing code. I have tried: Curl::Multi - it is somehow faster, but misses 50-90% of files (does not download them and gives no reason/code) multiple threads with Curl::Easy - around the same speed as single threaded Why is reused Curl::Easy slower than subsequent command line curl calls and how can I make it faster? Or what I am doing wrong? I would prefer to fix my download manager code than to make downloading for this case in a different way. Before this, I was calling command-line wget which I provided with a file with list of URLs. Howerver, not all errors were handled, also it was not possible to specify output file for each URL separately when using URL list. Now it seems to me that the best way would be to use multiple threads with system call to 'curl' command. But why when I can use directly Curl in Ruby? Code for the download manager is here, if it might help: Download Manager (I have played with timeouts, from not-setting it to various values, it did not seem help) Any hints appreciated.

  Read the article

• Linq Getting Customers group by date and then by their type

  - by Nitin varpe

  I am working on generating report for showing customer using LINQ in C#. I want to show no. of customers of each type. There are 3 types of customer registered, guest and manager. I want to group by customers by registered date and then by type of customer. i.e If today 3 guest, 4 registered and 2 manager are inserted. and tomorrow 4,5 and 6 are registered resp. then report should show Number of customers registerd on the day . separate row for each type. DATE TYPEOF CUSTOMER COUNT 31-10-2013 GUEST 3 31-10-2013 REGISTERED 4 31-10-2013 MANAGER 2 30-10-2013 GUEST 5 30-10-2013 REGISTERED 10 30-10-2013 MANAGER 3 LIKE THIS . var subquery = from eat in _customerRepo.Table group eat by new { yy = eat.CreatedOnUTC.Value.Year, mm = eat.CreatedOnUTC.Value.Month, dd = eat.CreatedOnUTC.Value.Day } into g select new { Id = g.Min(x => x.Id) }; var query = from c in _customerRepo.Table join cin in subquery.Distinct() on c.Id equals cin.Id select c; By above query I get minimum cutomers registerd on that day Thanks in advance

  Read the article

• StructureMap problems with bidirectional/circular dependencies

  - by leozilla

  I am currently integrating StructureMap within our business layer but have problems because of bidirectional dependencies. The layer contains multiple manager where each manager can call methods on each other, there are no restrictions or rules for communication. This also includes possible circular dependencies like in the example below. I know the design itself is questionable but currently we just want StructureMap to work and will focus on further refactoring in the future. Every manager implements the IManager interface internal interface IManager { bool IsStarted { get; } void Start(); void Stop(); } And does also have his own specific interface. internal interface IManagerA : IManager { void ALogic(); } internal interface IManagerB : IManager { void BLogic(); } Here are to dummy manager implementations. internal class ManagerA : IManagerA { public IManagerB ManagerB { get; set; } public void ALogic() { } public bool IsStarted { get; private set; } public void Start() { } public void Stop() { } } internal class ManagerB : IManagerB { public IManagerA ManagerA { get; set; } public void BLogic() { } public bool IsStarted { get; private set; } public void Start() { } public void Stop() { } } Here is the StructureMap configuration i use atm. I am still not sure how i should register the managers so currently i use a manual registration. Maybee someone could help me with this too. For<IManagerA>().Singleton().Use<ManagerA>(); For<IManagerB>().Singleton().Use<ManagerB>(); SetAllProperties(convention => { // configure the property injection for all managers convention.Matching(prop => typeof(IManager).IsAssignableFrom(prop.PropertyType)); }); After all i cannot create IManagerA because StructureMap complians about the circular dependency between ManagerA and ManagerB. Is there an easy and clean solution to solve this problem but keep to current design? br David

  Read the article

< Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >