steve green - Page 136 - Developer IT

Microphone doesn't work

- by mandy

I'm having a trouble with my built in microphone. Even if I use headphone with mic, it doesn't really work. The weird thing is, if I clap the green lines of the speaker icon jumps, but if I speak it doesn't. I have also tried some recordings, but I can not hear myself and adjusting the volume didn't help at all. I tried to restore it, still no change. I have updated it in the device manager, but it said there that it's up to date and the devices are working properly. Until I decided to recover the whole system (wherein I pressed zero and switch on button) to my surprise, the settings became different, most programs were deleted, even my files. It's like it was formatted and I'm so sad that the mic was not fixed. I really don't know what to do now. My laptop model is Toshiba satellite m840. I want to it return to its settings/set up just before I Recover the system and bring back all the programs that we're installed and of course, most of all, to fix my microphone so I can use Skype again and other video calling application.. I hope someone could help me. Thanks a lot!

Read the article

Problem with connecting two different networks

- by tanascius

I have two networks: 192.168.13.0/24 (blue) and 192.168.15.0/24 (green). Computer A is connected to the 13-net, only. Computer B has two interfaces, one in each network. There is third computer that acts like a router and connects the 13-net to the 15-net (only in this direction). Now, I'd like to ping 192.168.15.100 from computer A to B. Unfortunately there is never a reply. But when I use a hub instead of a switch it works. In my opinion the ping packet travels through the switch to the router (which is the default route/gateway for A). The router sends the packet back to the switch to B. Probably B receives it on its 15-net interface but answers with it's 15th interface? Is this possible? The problem is, that B may have only a gateway 192.168.13.50 - but I am not really sure of it (B is a embedded system with limited configuration possibilities). Can anyone explain what happens here? Thank you!

Read the article

java warnings on linux

- by Geo Papas

Hello i am getting warnings after i have installed java on kubuntu 11.10. The java programs run but i always get 4 warnings: $ java Warning: no leading - on line 1 of `/usr/lib/jvm/java-6-sun-1.6.0.26/jre/lib/amd64/jvm.cfg' Warning: missing VM type on line 1 of `/usr/lib/jvm/java-6-sun-1.6.0.26/jre/lib/amd64/jvm.cfg' Warning: no leading - on line 1 of `/usr/lib/jvm/java-6-sun-1.6.0.26/jre/lib/amd64/jvm.cfg' Warning: missing VM type on line 1 of `/usr/lib/jvm/java-6-sun-1.6.0.26/jre/lib/amd64/jvm.cfg' What am i missing? Thanks in advance! Here is the file content /usr/lib/jvm/java-6-sun-1.6.0.26/jre/lib/amd64/jvm.cfg : /usr/lib/jvm/java-6-sun # # %W% %E% # # Copyright (c) 2006, Oracle and/or its affiliates. All rights reserved. # ORACLE PROPRIETARY/CONFIDENTIAL. Use is subject to license terms. # # List of JVMs that can be used as an option to java, javac, etc. # Order is important -- first in this list is the default JVM. # NOTE that this both this file and its format are UNSUPPORTED and # WILL GO AWAY in a future release. # # You may also select a JVM in an arbitrary location with the # "-XXaltjvm=<jvm_dir>" option, but that too is unsupported # and may not be available in a future release. # -server KNOWN -client IGNORE -hotspot ERROR -classic WARN -native ERROR -green ERROR

Read the article

Diff bios - corrupt video driver

- by sfonck

Hi, I'm using an Dell M90 Precision Laptop which has a NVidia Quadro FX 2500M graphics card and is running Windows XP. Laptop has been running fine - but a few weeks ago screen went 'white' - restarted computer- bios and startup screens show weird green dots and stripes, normal startup only shows a black screen... only VGA mode works to display something. I've been trying to remove and reinstall the correct drivers downloaded from Dell's website - no solution. I gave up and reinstalled XP - everything was working perfect again. 2 weeks later - again the white screen - tried everything again (flashin new bios also - nothing works) Reinstalled XP - everyhting was working again, so I made a DriveSnapShot of the partition. Today - again the 'white screen'. Ok, no problem ...I was thinking all I needed to do was to restore the DriveSnapShot backup... Few minutes later the backup is restored ... but guess what: video driver does not work correctly... As the DriveSnapShot restored the complete partition, as it was at the time everything was working perfectly, this would mean my driver problems are due to 'settings' in the bios or on the graphics-card itself + these 'settings' can get overridden by doing a new XP-install.... I'm out of options, can somebody help me to find a solution for this problem: Is there some way to backup and restore a bios after seeing some problems? Is there some way to know what is causing this problem like a bios diff utility? Thanks!

Read the article

20 1TB drives vs. 10 2TB drives in RAID5/6 server

- by Hunter

Hi everyone, I will be setting up a server at work and I need some advice on some details. The setup will be one blade-type server (8-core, 16GB RAM) with two subsystems - one for the main storage the other to back it up. I'm shooting for a 20TB array (I know it'll be less after formatting and parity drives). So is there any advantage one way or the other with either 20 1TB drives or 10 2TB drives? I'm not sure right now how many controllers I should have either (in the quote I have is a dual-port controller). I would think two controllers for a server of this size would be a better choice than the dual-port controller (but I really don't know). And would an array of this size have any performance issues in RAID 5 or 6 (I know RAID 5 or 6 are "slower" because of all the parity calculations). Also, these will be either WD RE3 (1TB) or the RE4 (2TB). Oh, also, for the backup array would it be ok to use the WD 2TB green drives (also in RAID5 or 6)?

Read the article

How does voltage fluctuation affect a laptop

- by user45535

I own an Acer Aspire 3680. In the past 2 years, I have given, my laptop for service due to the same kind of problem. Last year at the same time, I gave my laptop to the service center. They repaired it and I managed to ask them this question: Why does this problem happen. How can I prevent it? They said, that due to voltage fluctuations, something has gone wrong in your laptop. They actually were hesistant in mentioning as to which part they changed/repaired. Now recently the same problem happened and again I gave it to a service center to get it repaired and they also said, this is caused due to voltage fluctuation. My Question is: Due to Voltage fluctuation which part of the laptop can get affected. How can I prevent this from happening. Laptop Symptoms before I gave to service: When I plug in the adapter for charging the Green Light blinks and the laptop doesn't turn on. Neither does the charging indicator indicates the light, while charging.

Read the article

How to boost playback volume in real time on media recorded with a very low volume.

- by L Marksman

I have never heard a satisfactory answer to this often misunderstood question, let me explain. Lets say I have a sound card and earphones/speakers that can play back audio loud enough in most cases. This is great but the problem is that you always find people who do not know how to record audio, from Youtube video's to music. So now you end up with a audio playback that only uses 10% or less of the capacity of your sound hardware, in vista/win 7 you will see this frequently in the mixer with the volume pushed up to max but the green sound level only goes up a millimeter or two. I am looking for (preferably free) software or a method to boost the sound level of any audio from any source in real time to use more of my hardware capacity similar to what VLC media player can do. Oh and please, do not tell me it is impossible. I am not trying to boost the volume past what my hardware is capable of, I am just trying to use my hardware's full capacity. Also please do not tell met to buy new hardware, I know I can use hardware amplification, I don't want to (like many others) spend money on a simple little problem like this. Thanks!

Read the article

CentOS: AJAX/jQuery not working

- by Australiya

In a nutshell, I have an unmanaged VPS. At one time, it had Ubuntu 10.10 server on it, then I reinstalled it with CentOS 6 and updated it to CentOS 6.2. Now, the problem is, the AJAX/jQuery shoutbox has ceased working (I assume it uses one of the two to inject itself into a div and then refresh when new messages are posted, I'm not sure, I didn't write these), and the plug-board script now shows me a lime green blank page. No changes to the source codes have been made, and they are in the location they expect themselves to be. I have Apache2, MySQL 5, PHP 5, and I did install the php-xml libraries. What am I missing? It's gotta be server side because the scripts themselves are fine, if I move them to a different server they work just fine. I'm not getting any errors related to this in the error_log file. Thanks in advance! Edit: If you want, you can look at the plugboard at kazeshini.net/plugboard and there's an installation of the chatbox at silverlotus.kazeshini.net/yshout/example, I know nothing about scripts and debugging so better someone else looks at it than someone that doesn't know what they're looking for.

Read the article

Top-Rated JavaScript Blogs

- by Andreas Grech

I am currently trying to find some blogs that talk (almost solely) on the JavaScript Language, and this is due to the fact that most of the time, bloggers with real life experience at work or at home development can explain more clearly and concisely certain quirks and hidden features than most 'Official Language Specifications' Below find a list of blogs that are JavaScript based (will update the list as more answers flow in): DHTML Kitchen, by Garrett Smith Robert's Talk, by Robert Nyman EJohn, by John Resig (of jQuery) Crockford's JavaScript Page, by Douglas Crockford Dean.edwards.name, by Dean Edwards Ajaxian, by various (@Martin) The JavaScript Weblog, by various SitePoint's JavaScript and CSS Page, by various AjaxBlog, by various Eric Lippert's Blog, by Eric Lippert (talks about JScript and JScript.Net) Web Bug Track, by various (@scunliffe) The Strange Zen Of JavaScript , by Scott Andrew Alex Russell (of Dojo) (@Eran Galperin) Ariel Flesler (@Eran Galperin) Nihilogic, by Jacob Seidelin (@llimllib) Peter's Blog, by Peter Michaux (@Borgar) Flagrant Badassery, by Steve Levithan (@Borgar) ./with Imagination, by Dustin Diaz (@Borgar) HedgerWow (@Borgar) Dreaming in Javascript, by Nosredna spudly.shuoink.com, by Stephen Sorensen Yahoo! User Interface Blog, by various (@Borgar) remy sharp's b:log, by Remy Sharp (@Borgar) JScript Blog, by the JScript Team (@Borgar) Dmitry Baranovskiy’s Web Log, by Dmitry Baranovskiy James Padolsey's Blog (@Kenny Eliasson) Perfection Kills; Exploring JavaScript by example, by Juriy Zaytsev DailyJS (@Ric) NCZOnline (@Kenny Eliasson), by Nicholas C. Zakas Which top-rated blogs am I currently missing from the above list, that you think should be imperative to any JavaScript developer to read (and follow) concurrently?

Read the article

Javascript - jquery ajax post error driving me mad

- by Exception Duck

Can't seem to figure this one out. I have a web service defined as (c#,.net) [WebMethod] public string SubmitOrder(string sessionid, string lang,int invoiceno,string email,string emailcc) { //do stuff. return stuff; } Which works fine, when I test it from the autogenerated test thingy in Vstudio. But when I call it from jquery as $j.ajax({ type: "POST", url: "/wservice/baby.asmx/SubmitOrder", data: "{'sessionid' : '"+sessionid+"',"+ "'lang': '"+usersettings.Currlang+"',"+ "'invoiceno': '"+invoicenr+"',"+ "'email':'"+$j(orderids.txtOIEMAIL).val()+"',"+ "'emailcc':'"+$j(orderids.txtOICC).val()+"'}", contenttype: "application/json; charset=utf-8", datatype: "json", success: function (msg) { submitordercallback(msg); }, error: AjaxFailed }); I get this fun error: responseText: System.InvalidOperationException: Missing parameter: sessionid. at System.Web.Services.Protocols.ValueCollectionParameterReader.Read(NameValueCollection collection) at System.Web.Services.Protocols.HtmlFormParameterReader.Read(HttpRequest request) at System.Web.Services.Protocols.HttpServerProtocol.ReadParameters() at System.Web.Services.Protocols.WebServiceHandler.CoreProcessRequest() data evaluates to: {'sessionid' : 'f61f8da737c046fea5633e7ec1f706dd','lang': 'SE','invoiceno': '11867','email':'[email protected]','emailcc':''} Ok, fair enough, but this function from jquery communicates fine with another webservice. Defined: c#: [WebMethod] public string CheckoutClicked(string sessionid,string lang) { //*snip* //jquery: var divCheckoutClicked = function() { $j.ajax({ type: "POST", url: "/wservice/baby.asmx/CheckoutClicked", data: "{'sessionid': '"+sessionid+"','lang': '"+usersettings.Currlang+"'}", contentType: "application/json; charset=utf-8", dataType: "json", success: function (msg) { divCheckoutClickedCallback(msg); }, error: AjaxFailed }); }

Read the article

Asp.Net MVC Tutorial Unit Tests

- by Nicholas

I am working through Steve Sanderson's book Pro ASP.NET MVC Framework and I having some issues with two unit tests which produce errors. In the example below it tests the CheckOut ViewResult: [AcceptVerbs(HttpVerbs.Post)] public ViewResult CheckOut(Cart cart, FormCollection form) { // Empty carts can't be checked out if (cart.Lines.Count == 0) { ModelState.AddModelError("Cart", "Sorry, your cart is empty!"); return View(); } // Invoke model binding manually if (TryUpdateModel(cart.ShippingDetails, form.ToValueProvider())) { orderSubmitter.SubmitOrder(cart); cart.Clear(); return View("Completed"); } else // Something was invalid return View(); } with the following unit test [Test] public void Submitting_Empty_Shipping_Details_Displays_Default_View_With_Error() { // Arrange CartController controller = new CartController(null, null); Cart cart = new Cart(); cart.AddItem(new Product(), 1); // Act var result = controller.CheckOut(cart, new FormCollection { { "Name", "" } }); // Assert Assert.IsEmpty(result.ViewName); Assert.IsFalse(result.ViewData.ModelState.IsValid); } I have resolved any issues surrounding 'TryUpdateModel' by upgrading to ASP.NET MVC 2 (Release Candidate 2) and the website runs as expected. The associated error messages are: *Tests.CartControllerTests.Submitting_Empty_Shipping_Details_Displays_Default_View_With_Error: System.ArgumentNullException : Value cannot be null. Parameter name: controllerContext* and the more detailed at System.Web.Mvc.ModelValidator..ctor(ModelMetadata metadata, ControllerContext controllerContext) at System.Web.Mvc.DefaultModelBinder.OnModelUpdated(ControllerContext controllerContext, ModelBindingContext bindingContext) at System.Web.Mvc.DefaultModelBinder.BindComplexModel(ControllerContext controllerContext, ModelBindingContext bindingContext) at System.Web.Mvc.Controller.TryUpdateModel[TModel](TModel model, String prefix, String[] includeProperties, String[] excludeProperties, IValueProvider valueProvider) at System.Web.Mvc.Controller.TryUpdateModel[TModel](TModel model, IValueProvider valueProvider) at WebUI.Controllers.CartController.CheckOut(Cart cart, FormCollection form) Has anyone run into a similar issue or indeed got the test to pass?

Read the article

Can I use RegFree Com with an application written in Excel VBA?

- by Steven

I have an application that is written in Excel VBA, myApp.xls. Currently we use InstallShield to distribute the application. Since we are moving to Windows Vista, I need to be able to install the application as a standard user. This does not allow for me to update the registry during the install process. In addition to the excel application we also have several VB6 applications. In order to install those applications, I was able to use RegFree com and Make My Manifest (MMM) as suggested by people on this forum (I greatly appreciate the insight btw!). This process, although a bit tedious, worked well. I then packaged the output from MMM in a VS '05 installer project and removed the UAC prompt on the msi using msiinfo.exe. Now I am faced with installing an application that basically lives in an Excel file. I modified a manifest that MMM created for me for one of my VB6 apps and tried to run the excel file through that, but I did not have much luck. Does anybody know of a way to do this? Does RegFree com work with VBA? Any thoughts or suggestions would be much appreciated. Thanks, Steve

Read the article

Asp.Net MVC 2: How exactly does a view model bind back to the model upon post back?

- by Dr. Zim

Sorry for the length, but a picture is worth 1000 words: In ASP.NET MVC 2, the input form field "name" attribute must contain exactly the syntax below that you would use to reference the object in C# in order to bind it back to the object upon post back. That said, if you have an object like the following where it contains multiple Orders having multiple OrderLines, the names would look and work well like this (case sensitive): This works: Order[0].id Order[0].orderDate Order[0].Customer.name Order[0].Customer.Address Order[0].OrderLine[0].itemID // first order line Order[0].OrderLine[0].description Order[0].OrderLine[0].qty Order[0].OrderLine[0].price Order[0].OrderLine[1].itemID // second order line, same names Order[0].OrderLine[1].description Order[0].OrderLine[1].qty Order[0].OrderLine[1].price However we want to add order lines and remove order lines at the client browser. Apparently, the indexes must start at zero and contain every consecutive index number to N. The black belt ninja Phil Haack's blog entry here explains how to remove the [0] index, have duplicate names, and let MVC auto-enumerate duplicate names with the [0] notation. However, I have failed to get this to bind back using a nested object: This fails: Order.id // Duplicate names should enumerate at 0 .. N Order.orderDate Order.Customer.name Order.Customer.Address Order.OrderLine.itemID // And likewise for nested properties? Order.OrderLine.description Order.OrderLine.qty Order.OrderLine.price Order.OrderLine.itemID Order.OrderLine.description Order.OrderLine.qty Order.OrderLine.price I haven't found any advice out there yet that describes how this works for binding back nested ViewModels on post. Any links to existing code examples or strict examples on the exact names necessary to do nested binding with ILists? Steve Sanderson has code that does this sort of thing here, but we cannot seem to get this to bind back to nested objects. Anything not having the [0]..[n] AND being consecutive in numbering simply drops off of the return object. Any ideas?

Read the article

XML String into a DataGridView (C#)

- by Justin Daniels

I am currently working with a webservice to pull a report about users in a remote support system. After pulling my report and receiving the result, I am given the following string back by the method: <report><header><field id="0">Source</field><field id="1">Session ID</field><field id="2">Date</field><field id="3">Name</field><field id="24">Technician Name</field><field id="25">Technician ID</field></header><data><row><field id="0">Email</field><field id="1">55037806</field><field id="2">4/13/2010 2:28:06 AM</field><field id="3">Bill Gates</field><field id="24">John</field><field id="25">1821852</field></row><row><field id="0">Telephone</field><field id="1">55034548</field><field id="2">4/13/2010 12:59:44 AM</field><field id="3">Steve Jobs</field><field id="24">John</field><field id="25">1821852</field></row></data></report> After receiving this string, I need to take it and display the actual data in a datagridview. I've tried putting it into an XMLDocument then reading that, but it seems to keep failing. Just interested in another set of eyes :) Application is written in C# in VS2010.

Read the article

Trying to debug a 'Assertion failure in -[UIActionSheet showInView:]' error....

- by dsobol

I am working through "Beginning iPad Application Development" and am getting hung up in Chapter 3 where I have created a project that works with an Action Sheet. As it stands now, my application loads into the simulator just fine with no errors that I am aware of, but as it runs, it crashes with the following errors showing up in the debugger window: 2010-05-31 19:44:39.703 UsingViewsActionSheet[49538:207] * Assertion failure in -[UIActionSheet showInView:], /SourceCache/UIKit_Sim/UIKit-1145.66/UIAlert.m:7073 2010-05-31 19:44:39.705 UsingViewsActionSheet[49538:207] * Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'Invalid parameter not satisfying: view != nil' I am sure that this is the block where the app breaks based upon my use of breakpoints. //Implement viewDidLoad to do additional setup after loading the view, typically from a nib. - (void)viewDidLoad { UIActionSheet *action = [[UIActionSheet alloc] initWithTitle:@"This is my Action Sheet!" delegate:self cancelButtonTitle:@"OK" destructiveButtonTitle:@"Delete Message!" otherButtonTitles:@"Option 1", @"Option 2", @"Option 3", nil]; [action showInView:self.view]; // <-- This line seems to trigger the crash.... [action release]; [super viewDidLoad]; } Am I missing something obvious, or is there more to the problem than is shown here? I have looked at the abstract for showInView and cannot divine anything there yet. I appreciate any and all asssitance. Regards, Steve O'Sullivan

Read the article

How to use a viewstate'd object as a datasource for controls on a user control

- by user557325

I've got a listview on a control. Each row comprises a checkbox and another listview. The outer listview is bound to a property on the control (via a method call, can't set a property as a SelectMethod on an ObjectDataSource it would appear) which is lazy loaded suchly: Public ReadOnly Property ProductLineChargeDetails() As List(Of WebServiceProductLineChargeDetail) Get If ViewState("WSProductLineChargeDetails") Is Nothing Then ViewState("WSProductLineChargeDetails") = GetWebServiceProductLineChargeDetails() End If Return DirectCast(ViewState("WSProductLineChargeDetails"), Global.System.Collections.Generic.List(Of Global.MI.Open.WebServiceProductLineChargeDetail)) End Get End Property The shape of the object referenced by the data source is something like this: (psuedocode) Product { bool Licenced; List<Charge> charges; } Charge { int property1; string property2; bool property3 . . . } The reason for the use of viewstate is this: When an one of the checkboxes on one of the outer list view rows is checked or unchecked I want to modify the object that the ODS represents (for example I'll add a couple of Charge objects to the relevant Product object) and then rebind. The problem I'm getting is that after every postback (specifically after checking or unchecking one of the rows' checkbox) my viewstate is empty. Thiss means that any changes I make to my viewstate'd object is lost. Now, I've worked out (after much googling and reading, amongst many others, Scott Mitchel's excellent bit on ViewState) that during initial databinding IsTrackingViewState is set to false. That means, I think, that assigning the return from GetWebServiceProductLineChargeDetails() to the ViewState item in my Property Get during the initial databind won't work. Mind you, even when the IsTrackingViewState is true and I call the Property Get, come the next postback, the viewstate is empty. So do you chaps have any ideas on how I keep the object referenced by the ObjectDataSource in ViewState between postbacks and update it and get those changes to stay in ViewState? This has been going on for a couple of days now and I'm getting fed up! Cheers in advance Steve

Read the article

NullReferenceException when initializing NServiceBus within web application Application_Start method

- by SteveBering

I am running the 2.0 RTM of NServiceBus and am getting a NullReferenceException when my MessageModule binds the CurrentSessionContext to my NHibernate sessionfactory. From within my Application_Start, I call the following method: public static void WithWeb(IUnityContainer container) { log4net.Config.XmlConfigurator.Configure(); var childContainer = container.CreateChildContainer(); childContainer.RegisterInstance<ISessionFactory>(NHibernateSession.SessionFactory); var bus = NServiceBus.Configure.WithWeb() .UnityBuilder(childContainer) .Log4Net() .XmlSerializer() .MsmqTransport() .IsTransactional(true) .PurgeOnStartup(false) .UnicastBus() .ImpersonateSender(false) .LoadMessageHandlers() .CreateBus(); var activeBus = bus.Start(); container.RegisterInstance(typeof(IBus), activeBus); } When the bus is started, my message module starts with the following: public void HandleBeginMessage() { try { CurrentSessionContext.Bind(_sessionFactory.OpenSession()); } catch (Exception e) { _log.Error("Error occurred in HandleBeginMessage of NHibernateMessageModule", e); throw; } } In looking at my log, we are logging the following error when the bind method is called: System.NullReferenceException: Object reference not set to an instance of an object. at NHibernate.Context.WebSessionContext.GetMap() at NHibernate.Context.MapBasedSessionContext.set_Session(ISession value) at NHibernate.Context.CurrentSessionContext.Bind(ISession session) Apparently, there is some issue in getting access to the HttpContext. Should this call to configure NServiceBus occur later in the lifecycle than Application_Start? Or is there another workaround that others have used to get handlers working within an Asp.NET Web application? Thanks, Steve

Read the article

html5 vs flash - full comparison chart anywhere?

- by iddqd

So since Steve Jobs said Flash sucks and implied that HTML5 can do everything Flash can without the need for a Plugin, I keep hearing those exact words from a lot of People. I would really like to have a Chart somewhere (similar to http://en.wikipedia.org/wiki/Comparison_of_layout_engines_%28HTML5%29#Form_elements_and_attributes ) that I can just show to those people. Showing all the little things that Flash can do right now, that HTML5/Ajax/CSS is not yet even thinking about. But of course also the things that HTML5 does better. I would like to see details compared like audio playback, realtime audio processing, byte level access, bitmap data manipulation, webcam access, binary sockets, stuff in the works such as P2P technology (adobe stratus) and all the stuff I don't know about myself. Ideally with examples of what can be accomplished with, lets say Binary Sockets (such as a POP3 client) because otherwise it won't mean a lot to non-programmers since they will just say "well we can do without Binary Sockets". And ideally with some current benchmarks and some examples of websites that use this technology. I've searched the web and am surprised not to find anything. So is there such a comparison somewhere? Or does anybody want to create this and post it to Wikipedia? ;-)

Read the article

I need some help with either my SQL or my PHP I do not know which...

- by sico87

Read the article

sorl-thumbnail unit tests fail by 1 pixel (!)

- by stevejalim

Hi I'm using sorl-thumbnail in a Django 1.2 (currently 1.2 RC) project and getting a surprising failure of four of sorl's built-in unit tests. Essentially, the resized images are all 1px shorter than the unit tests expect them to be. See below for details I'm developing on OSX 10.5.8 (not Snow Leopard) with Python 2.5.1 (r251:54863, Feb 6 2009, 19:02:12) and PIL 1.1.6. Any thoughts what might be up? Cheers Steve ====================================================================== FAIL: test_extension (sorl.thumbnail.tests.fields.FieldTest) ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/local/django/myprojectnamehere/lib/sorl/thumbnail/tests/fields.py", line 66, in test_extension self.verify_thumbnail((50, 37), thumb, expected_filename) File "/usr/local/django/myprojectnamehere/lib/sorl/thumbnail/tests/base.py", line 92, in verify_thumbnail self.assertEqual(image.size, expected_size) AssertionError: (50, 38) != (50, 37) ====================================================================== FAIL: test_thumbnail (sorl.thumbnail.tests.fields.ImageWithThumbnailsFieldTest) ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/local/django/myprojectnamehere/lib/sorl/thumbnail/tests/fields.py", line 111, in test_thumbnail self.verify_thumbnail((50, 37), thumb, expected_filename) File "/usr/local/django/myprojectnamehere/lib/sorl/thumbnail/tests/base.py", line 92, in verify_thumbnail self.assertEqual(image.size, expected_size) AssertionError: (50, 38) != (50, 37) ====================================================================== FAIL: testTag (sorl.thumbnail.tests.templatetags.ThumbnailTagTest) ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/local/django/myprojectnamehere/lib/sorl/thumbnail/tests/templatetags.py", line 118, in testTag self.verify_thumbnail((90, 67), expected_filename=expected_fn) File "/usr/local/django/myprojectnamehere/lib/sorl/thumbnail/tests/base.py", line 92, in verify_thumbnail self.assertEqual(image.size, expected_size) AssertionError: (90, 68) != (90, 67)

Read the article

How reliable is Verify() in Moq?

- by matthewayinde

I'm only new to Unit Testing and ASP.NET MVC. I've been trying to get my head into both using Steve Sanderson's "Pro ASP.NET MVC Framework". In the book there is this piece of code: public class AdminController : Controller { ... [AcceptVerbs(HttpVerbs.Post)] public ActionResult Edit(Product product, HttpPostedFileBase image) { ... productsRepository.SaveProduct(product); TempData["message"] = product.Name + " has been saved."; return RedirectToAction("Index"); } } That he tests like so: [Test] public void Edit_Action_Saves_Product_To_Repository_And_Redirects_To_Index() { // Arrange AdminController controller = new AdminController(mockRepos.Object); Product newProduct = new Product(); // Act var result = (RedirectToRouteResult)controller.Edit(newProduct, null); // Assert: Saved product to repository and redirected mockRepos.Verify(x => x.SaveProduct(newProduct)); Assert.AreEqual("Index", result.RouteValues["action"]); } THE TEST PASSES. So I intensionally corrupt the code by adding "productsRepository.DeleteProduct(product);" after the "SaveProduct(product);" as in: ... productsRepository.SaveProduct(product); productsRepository.DeleteProduct(product); ... THE TEST PASSES.(i.e Condones a calamitous [hypnosis + intellisense]-induced typo :) ) Could this test be written better? Or is there something I should know? Thanks a lot.

Read the article

Converter problem with XmlDataProvider

- by Andrew

Sorry for this, I've just started programming with wpf. I can't seem to figure out why the following xaml displays "System.Xml.XmlElement" instead of the actual xml node content. This is displayed 5 times in the listbox whenever I run it. Not sure where I'm going wrong... <Window x:Class="TestBinding.Window1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="Window1" Height="300" Width="300"> <Window.Resources> <XmlDataProvider x:Key="myXmlSource" XPath="/root"> <x:XData> <root xmlns=""> <name>Steve</name> <name>Arthur</name> <name>Sidney</name> <name>Billy</name> <name>Steven</name> </root> </x:XData> </XmlDataProvider> <DataTemplate x:Key="shmooga"> <TextBlock Text="{Binding}"/> </DataTemplate> </Window.Resources> <Grid> <ListBox ItemTemplate="{StaticResource shmooga}" ItemsSource="{Binding Source={StaticResource myXmlSource}, XPath=name}"> </ListBox> </Grid> </Window> Any help would be very much appreciated. Thanks!

Read the article

maintaining continuous count in php

- by LiveEn

I have a small problem maintain a count for the position. i have written a function function that will select all the users within a page and positions them in the order. Eg: Mike Position 1 Steve Postion 2.............. .... Jacob Position 30 but the problem that i have when i move to the second page, the count is started from first Eg: Jenny should be number 31 but the list goes, Jenny Position 1 Tanya Position 2....... Below is my function function nrk($duty,$page,$position) { $url="http://www.test.com/people.php?q=$duty&start=$page"; $ch=curl_init(); curl_setopt($ch,CURLOPT_URL,$url); $result=curl_exec($ch); $dom = new DOMDocument(); @$dom->loadHTML($result); $xpath=new DOMXPath($dom); $elements = $xpath->evaluate("//div"); foreach ($elements as $element) { $name = $element->getElementsByTagName("name")->item(0)->nodeValue; $position=$position+1; echo $name." Position:".$position." "; } return $position; } Below is the for loop where i try to loop thru the page count for ($page=0;$page<=$pageNumb;$page=$page + 10) { nrk($duty,$page,$position); } I dont want to maintain a array key value in the for each coz i drop certain names...

Read the article

parseInt and viewflipper layout problems

- by user1234167

I have a problem with parseInt it throws the error: unable to parse 'null' as integer. My view flipper is also not working. Hopefully this is an easy enough question. Here is my activity: import javax.xml.parsers.SAXParser; import javax.xml.parsers.SAXParserFactory; import org.xml.sax.InputSource; import org.xml.sax.XMLReader; import android.app.Activity; import android.graphics.Color; import android.os.Bundle; import android.util.Log; import android.view.View; import android.view.View.OnClickListener; import android.widget.Button; import android.widget.LinearLayout; import android.widget.TextView; import android.widget.ViewFlipper; import xml.parser.dataset; public class XmlParserActivity extends Activity implements OnClickListener { private final String MY_DEBUG_TAG = "WeatherForcaster"; // private dataset myDataSet; private LinearLayout layout; private int temp= 0; /** Called when the activity is first created. */ //the ViewSwitcher private Button btn; private ViewFlipper flip; // private TextView tv; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); layout=(LinearLayout)findViewById(R.id.linearlayout1); btn=(Button)findViewById(R.id.btn); btn.setOnClickListener(this); flip=(ViewFlipper)findViewById(R.id.flip); //when a view is displayed flip.setInAnimation(this,android.R.anim.fade_in); //when a view disappears flip.setOutAnimation(this, android.R.anim.fade_out); // String postcode = null; // public String getPostcode { // return postcode; // } //URL newUrl = c; // myweather.setText(c.toString()); /* Create a new TextView to display the parsingresult later. */ TextView tv = new TextView(this); // run(0); //WeatherApplicationActivity postcode = new WeatherApplicationActivity(); try { /* Create a URL we want to load some xml-data from. */ URL url = new URL("http://new.myweather2.com/developer/forecast.ashx?uac=gcV3ynNdoV&output=xml&query=G41"); //String url = new String("http://new.myweather2.com/developer/forecast.ashx?uac=gcV3ynNdoV&output=xml&query="+WeatherApplicationActivity.postcode ); //URL url = new URL(url); //url.toString( ); //myString(url.toString() + WeatherApplicationActivity.getString(postcode)); // url + WeatherApplicationActivity.getString(postcode); /* Get a SAXParser from the SAXPArserFactory. */ SAXParserFactory spf = SAXParserFactory.newInstance(); SAXParser sp = spf.newSAXParser(); /* Get the XMLReader of the SAXParser we created. */ XMLReader xr = sp.getXMLReader(); /* Create a new ContentHandler and apply it to the XML-Reader*/ handler myHandler = new handler(); xr.setContentHandler(myHandler); /* Parse the xml-data from our URL. */ xr.parse(new InputSource(url.openStream())); /* Parsing has finished. */ /* Our ExampleHandler now provides the parsed data to us. */ dataset parsedDataSet = myHandler.getParsedData(); /* Set the result to be displayed in our GUI. */ tv.setText(parsedDataSet.toString()); } catch (Exception e) { /* Display any Error to the GUI. */ tv.setText("Error: " + e.getMessage()); Log.e(MY_DEBUG_TAG, "WeatherQueryError", e); } temp = Integer.parseInt(xml.parser.dataset.getTemp()); if(temp <0){ //layout.setBackgroundColor(Color.BLUE); //layout.setBackgroundColor(getResources().getColor(R.color.silver)); findViewById(R.id.flip).setBackgroundColor(Color.BLUE); } else if(temp > 0 && temp < 9) { //layout.setBackgroundColor(Color.GREEN); //layout.setBackgroundColor(getResources().getColor(R.color.silver)); findViewById(R.id.flip).setBackgroundColor(Color.GREEN); } else { //layout.setBackgroundColor(Color.YELLOW); //layout.setBackgroundColor(getResources().getColor(R.color.silver)); findViewById(R.id.flip).setBackgroundColor(Color.YELLOW); } /* Display the TextView. */ this.setContentView(tv); } @Override public void onClick(View arg0) { // TODO Auto-generated method stub onClick(View arg0) { // TODO Auto-generated method stub flip.showNext(); //specify flipping interval //flip.setFlipInterval(1000); //flip.startFlipping(); } } this is my dataset: package xml.parser; public class dataset { static String temp = null; // private int extractedInt = 0; public static String getTemp() { return temp; } public void setTemp(String temp) { this.temp = temp; } this is my handler: public void characters(char ch[], int start, int length) { if(this.in_temp){ String setTemp = new String(ch, start, length); // myParsedDataSet.setTempUnit(new String(ch, start, length)); // myParsedDataSet.setTemp; } the dataset and handler i only pasted the code that involves the temp as i no they r working when i take out the if statement. However even then my viewflipper wont work. This is my main xml: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent" android:id="@+id/linearlayout1" > <TextView android:layout_width="fill_parent" android:layout_height="wrap_content" android:textSize="25dip" android:text="Flip Example" /> <TextView android:layout_width="fill_parent" android:layout_height="wrap_content" android:textSize="25dip" android:id="@+id/tv" /> <Button android:layout_width="wrap_content" android:layout_height="wrap_content" android:textSize="25dip" android:text="Flip" android:id="@+id/btn" android:onClick="ClickHandler" /> <ViewFlipper android:layout_width="fill_parent" android:layout_height="fill_parent" android:id="@+id/flip"> <LinearLayout android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent" > <TextView android:layout_width="fill_parent" android:layout_height="wrap_content" android:textSize="25dip" android:text="Item1a" /> </LinearLayout> <TextView android:layout_width="fill_parent" android:layout_height="wrap_content" android:textSize="25dip" android:id="@+id/tv2" /> </ViewFlipper> </LinearLayout> this is my logcat: 04-01 18:02:24.744: E/AndroidRuntime(7331): FATAL EXCEPTION: main 04-01 18:02:24.744: E/AndroidRuntime(7331): java.lang.RuntimeException: Unable to start activity ComponentInfo{xml.parser/xml.parser.XmlParserActivity}: java.lang.NumberFormatException: unable to parse 'null' as integer 04-01 18:02:24.744: E/AndroidRuntime(7331): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:1830) 04-01 18:02:24.744: E/AndroidRuntime(7331): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:1851) 04-01 18:02:24.744: E/AndroidRuntime(7331): at android.app.ActivityThread.access$1500(ActivityThread.java:132) 04-01 18:02:24.744: E/AndroidRuntime(7331): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1038) 04-01 18:02:24.744: E/AndroidRuntime(7331): at android.os.Handler.dispatchMessage(Handler.java:99) 04-01 18:02:24.744: E/AndroidRuntime(7331): at android.os.Looper.loop(Looper.java:150) 04-01 18:02:24.744: E/AndroidRuntime(7331): at android.app.ActivityThread.main(ActivityThread.java:4293) 04-01 18:02:24.744: E/AndroidRuntime(7331): at java.lang.reflect.Method.invokeNative(Native Method) 04-01 18:02:24.744: E/AndroidRuntime(7331): at java.lang.reflect.Method.invoke(Method.java:507) 04-01 18:02:24.744: E/AndroidRuntime(7331): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:849) 04-01 18:02:24.744: E/AndroidRuntime(7331): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:607) 04-01 18:02:24.744: E/AndroidRuntime(7331): at dalvik.system.NativeStart.main(Native Method) 04-01 18:02:24.744: E/AndroidRuntime(7331): Caused by: java.lang.NumberFormatException: unable to parse 'null' as integer 04-01 18:02:24.744: E/AndroidRuntime(7331): at java.lang.Integer.parseInt(Integer.java:356) 04-01 18:02:24.744: E/AndroidRuntime(7331): at java.lang.Integer.parseInt(Integer.java:332) 04-01 18:02:24.744: E/AndroidRuntime(7331): at xml.parser.XmlParserActivity.onCreate(XmlParserActivity.java:118) 04-01 18:02:24.744: E/AndroidRuntime(7331): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1072) 04-01 18:02:24.744: E/AndroidRuntime(7331): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:1794) I hope I have given enough information about my problems. I will be extremely grateful if anyone can help me out.

Read the article

Network Data Packet connectivity intent

- by Rakesh

I am writing an Android application which can enable and disable the Network Data packet connection. I am also using one broadcast receiver to check the Network Data packet connection. I have registered broadcast receiver and provided required permission in Manifest file. But when I run this application it changes the connection state and after that it crashes. But when I don't include this broadcast receiver it works fine. I am not able to see any kind of log which can provide some clue. Here is my code for broadcast receiver. <?xml version="1.0" encoding="utf-8"?> <manifest xmlns:android="http://schemas.android.com/apk/res/android" package="com.rakesh.simplewidget" android:versionCode="1" android:versionName="1.0" > <uses-sdk android:minSdkVersion="10" />  <uses-permission android:name="android.permission.CHANGE_NETWORK_STATE" /> <uses-permission android:name="android.permission.MODIFY_PHONE_STATE" /> <uses-permission android:name="android.permission.ACCESS_NETWORK_STATE" /> <application android:icon="@drawable/ic_launcher" android:label="@string/app_name" > <activity android:name=".SimpleWidgetExampleActivity" android:label="@string/app_name" > <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity>  <receiver android:name=".ConnectivityReceiver" > <intent-filter> <action android:name="android.net.conn.CONNECTIVITY_CHANGE" /> </intent-filter> </receiver> </application> </manifest> My Broadcast receiver class is as following. import android.content.BroadcastReceiver; import android.content.Context; import android.content.Intent; import android.net.ConnectivityManager; import android.net.NetworkInfo; import android.util.Log; public class ConnectivityReceiver extends BroadcastReceiver { @Override public void onReceive(Context context, Intent intent) { NetworkInfo info = (NetworkInfo)intent.getParcelableExtra(ConnectivityManager.EXTRA_NETWORK_INFO); if(info.getType() == ConnectivityManager.TYPE_MOBILE){ if(info.isConnectedOrConnecting()){ Log.e("RK","Mobile data is connected"); }else{ Log.e("RK","Mobile data is disconnected"); } } } } my Main activity file. package com.rakesh.simplewidget; import java.lang.reflect.Field; import java.lang.reflect.Method; import android.app.Activity; import android.content.Context; import android.content.Intent; import android.graphics.Color; import android.net.ConnectivityManager; import android.os.Bundle; import android.telephony.TelephonyManager; import android.util.Log; import android.view.View; import android.widget.Button; import android.widget.Toast; public class SimpleWidgetExampleActivity extends Activity { private Button btNetworkSetting; /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); btNetworkSetting = (Button)findViewById(R.id.btNetworkSetting); if(checkConnectivityState(getApplicationContext())){ btNetworkSetting.setBackgroundColor(Color.GREEN); }else{ btNetworkSetting.setBackgroundColor(Color.GRAY); } } public void openNetworkSetting(View view){ Method dataConnSwitchmethod; Class telephonyManagerClass; Object ITelephonyStub; Class ITelephonyClass; Context context = view.getContext(); boolean enabled = !checkConnectivityState(context); final ConnectivityManager conman = (ConnectivityManager) context.getSystemService(Context.CONNECTIVITY_SERVICE); try{ final Class conmanClass = Class.forName(conman.getClass().getName()); final Field iConnectivityManagerField = conmanClass.getDeclaredField("mService"); iConnectivityManagerField.setAccessible(true); final Object iConnectivityManager = iConnectivityManagerField.get(conman); final Class iConnectivityManagerClass = Class.forName(iConnectivityManager.getClass().getName()); final Method setMobileDataEnabledMethod = iConnectivityManagerClass.getDeclaredMethod("setMobileDataEnabled", Boolean.TYPE); setMobileDataEnabledMethod.setAccessible(true); setMobileDataEnabledMethod.invoke(iConnectivityManager, enabled); if(enabled){ Toast.makeText(view.getContext(), "Enabled Network Data", Toast.LENGTH_LONG).show(); view.setBackgroundColor(Color.GREEN); } else{ Toast.makeText(view.getContext(), "Disabled Network Data", Toast.LENGTH_LONG).show(); view.setBackgroundColor(Color.LTGRAY); } }catch(Exception e){ Log.e("Error", "some error"); Toast.makeText(view.getContext(), "It didn't work", Toast.LENGTH_LONG).show(); } } private boolean checkConnectivityState(Context context){ final TelephonyManager telephonyManager = (TelephonyManager) context .getSystemService(Context.TELEPHONY_SERVICE); ConnectivityManager af ; return telephonyManager.getDataState() == TelephonyManager.DATA_CONNECTED; } } Log file: java.lang.RuntimeException: Unable to instantiate receiver com.rakesh.simplewidget.ConnectivityReceiver: java.lang.ClassNotFoundException: com.rakesh.simplewidget.ConnectivityReceiver in loader dalvik.system.PathClassLoader[/data/app/com.rakesh.simplewidget-2.apk] E/AndroidRuntime(26094): at android.app.ActivityThread.handleReceiver(ActivityThread.java:1777) E/AndroidRuntime(26094): at android.app.ActivityThread.access$2400(ActivityThread.java:117) E/AndroidRuntime(26094): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:985) E/AndroidRuntime(26094): at android.os.Handler.dispatchMessage(Handler.java:99) E/AndroidRuntime(26094): at android.os.Looper.loop(Looper.java:130) E/AndroidRuntime(26094): at android.app.ActivityThread.main(ActivityThread.java:3691) E/AndroidRuntime(26094): at java.lang.reflect.Method.invokeNative(Native Method) E/AndroidRuntime(26094): at java.lang.reflect.Method.invoke(Method.java:507) E/AndroidRuntime(26094): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:907) E/AndroidRuntime(26094): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:665) E/AndroidRuntime(26094): at dalvik.system.NativeStart.main(Native Method) It seems Android is not able to recognize file Broadcast Receiver class. Any idea why I am getting this error? PS: Some information about Android environment and platform. - Android API 10. - Running on Samsung Galaxy II which has android 2.3.6 Edit: my broadcast receiver file ConnectivityReceiver.java was present in default package and it was not being recognized by Android. Android was looking for this file in current package i.e com.rakesh.simplewidget; I just moved connectivityReciever.java file to com.rakesh.simplewidget package and problem was solved.

Search Results

Search found 4082 results on 164 pages for 'steve green'.

Page 136/164 | < Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143 | Next Page >

- by mandy

- by tanascius

- by Geo Papas

- by sfonck

- by Hunter

- by user45535

- by L Marksman

- by Australiya

- by Andreas Grech

- by Exception Duck

- by Nicholas

- by Steven

- by Dr. Zim

- by Justin Daniels

- by dsobol

- by user557325

- by SteveBering

- by iddqd

- by sico87

- by stevejalim

- by matthewayinde

- by Andrew

- by LiveEn

- by user1234167

- by Rakesh

< Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143 | Next Page >