Search Results

Search found 7931 results on 318 pages for 'hardware rec'.

Page 137/318 | < Previous Page | 133 134 135 136 137 138 139 140 141 142 143 144  | Next Page >

  • Limit bandwith on network of computers

    - by Joseph34123
    We have network in office of approximately 10 computers sometimes when someone downloads something for work (e.g. syncing email with an attachment or Dropbox), everyone slows down. I could limit each computer in office but the problem is that we have an open WiFi network, and I cannot access the computers that use it. We have one main DSL router "Netopia 3347" and another router connected to it on wire for public wifi is "Linksys WRT110". I cannot change the setup we have and don't want to. There's 2 approaches here: Set office computers download limit in each computer and then I need to find out how I can set a download limit for the wifi network such as in the router settings. It's a Linksys router and I did not see the option for this, so maybe I need new router for WiFi? Don't bother with each computer and put some "specific hardware" or another computer before router so all traffic goes trough it and I can then assign priority maximum speed for each IP address. Question is what hardware do I need?

    Read the article

  • USB mouse disconnecting and reconnecting in windows and linux

    - by Kalak
    I have a problem similar to what is described at "Why is my USB mouse disconnecting and reconnecting randomly and often?" except is is happening in both Windows 7 and Linux (Ubuntu 12/04TLS, fully patched), multiple mice, multiple OSs. It stops responding to input for about 3-5 seconds, then starts responding again. It's more frequent and lasts longer when running games (TF2, L4D, Dishonored, Borderlands 2, and more), but happens when just running the OS as well. I was hoping it was the motherboard so I bought a USB 2.0 PCI card to try that, but it's still happening. I've stripped it down to just the keyboard and mouse (different keyboard too just in case the keyboard was the problem), but it's still happening. All the hardware (mice and keyboards) work fine on other computers. I have literally pulled the mouse and keyboard out and plugged them into another computer (laptop) and re-joined the online game and had no problem with the keyboard and mouse combo that just failed on my gaming rig. Please no driver / Windows or Linux only suggestions, as that wouldn't effect both OSs. edit: known good mice I've brought home are now going bad. I suspect the hardware is messed up (voltage?) and has been frying the mice.

    Read the article

  • How can I debug user mode driver failures in Windows 8

    - by Tom
    I have a 32 GB SD Card. Whenever I insert this card in to my newly upgraded Windows 8 laptop the OS stops responding normally. Metro Apps won't work. The system may or may not log in. Desktop apps may or may not be able to do things. When I remove the card and restart then all is fine. As soon as I put the card back in, the system starts misbehaving again. I've run Windows Update, so I have the latest drivers from Microsoft. This does not occur with the 8 GB cards I have. Unfortunately I only have one 32 GB card, so I can't test with others. From examining the system event log I've determined this is happening due to a user mode driver failure. How can I best debug this issue from here? How can I figure out which driver this is related to? Will there be a Dr. Watson crash dump somewhere? Details - System - Provider [ Name] Microsoft-Windows-DriverFrameworks-UserMode [ Guid] {2E35AAEB-857F-4BEB-A418-2E6C0E54D988} EventID 10110 Version 1 Level 1 Task 64 Opcode 0 Keywords 0x2000000000000000 - TimeCreated [ SystemTime] 2012-10-29T00:51:57.532718300Z EventRecordID 40417 Correlation - Execution [ ProcessID] 1056 [ ThreadID] 3796 Channel System Computer thebrain - Security [ UserID] S-1-5-18 - UserData - UMDFHostProblem [ lifetime] {811E3DC4-FBC6-420B-ABCC-AD7505A36F3B} - Problem [ code] 3 [ detectedBy] 2 ExitCode 3 - Operation [ code] 259 Message 72448 Status 4294967295 Edit 1 So I tried using Debug View from SysInternals (you can get it here: http://technet.microsoft.com/en-us/sysinternals/bb896647.aspx). That gave me this information: which is not especially helpful. Then I tried connecting WinDbg to WUDFHost.exe (the process that seems to host user mode drivers) to see if it could catch the error. Get it here: http://msdn.microsoft.com/en-US/windows/hardware/hh852363 Instructions: http://msdn.microsoft.com/en-US/library/windows/hardware/ff554716(v=vs.85).aspx That didn't help much. It didn't catch any exceptions as I'd hoped (which would point me to the cause of the crash at least). Here's the stack of one of the threads:

    Read the article

  • How do you handle data archiving?

    - by 20th Century Boy
    Backups are one thing, but long term archival is another. For example, you might be required to store emails for 7 years, or keep all project data indefinitely. I used to save archives to tape, but then I've had tapes get destroyed (drives rip the tape out). So...write to 2 tapes I hear you say. Is that what others do? Have 2 (or more) tapes of the same data for redundancy? But then the other issue is that tapes cannot usually be read by different backup software vendors. Eg if you go from Arcserve - Backup Exec - Commvault over 10 years you would need to keep all 3 systems so that you could restore old data. Likewise for hardware. Old tapes might not be barcoded. Might not be compatible with the new library etc etc. So do you keep old tape hardware AND old software just in case you might need to restore a 10 year-old file? Or...when you move to a new backup system do you migrate all archived data to the new system and re-archive it onto new tapes? That could be a huge job. Any thoughts?

    Read the article

  • Media Center - TV constantly pauses 1/2 second then plays 1 second

    - by Bob
    I have a problem watching TV in Media Center. The TV constantly pauses 1/2 second then plays 1 second, pauses 1/2 second, plays 1 second - it is constant and does not vary. I know the problem is Media Center because I can use Pinnacle's TVCenterPro and there is no skipping/pausing. I was using cable, and switched to DirecTV (satellite). Trying to do "Set up TV signal" in Media Center seems to be what broke it. I get an error "IR Hardware not detected." I can use the remote to "try again" - so the IR hardware works fine (Media Center's remote/sensor). I tried plugging the IR Blaster into both ports, and I tried a different USB port for the IR receiver. I can't complete the setup. Media Center was playing it okay before I tried to run setup. (I ran setup to try to do recording with Media Center.) Pinnacle PCTV 800i HD PCI card, ATI Radeon HD 3200 Graphics, Windows XP SP3 Media Center Edition, AMD Athlon Dual Core 2.5 GHz, 1.75 GB RAM.

    Read the article

  • SQL Server 2008 R2 mirroring failing

    - by andriusn
    I have two Windows 2008 R2 (Amazon EC2) instances running SQL Server 2008 R2. I use 9TB striped disks (9x1TB EBS volumes) for storage. One server is running as principal and second one as mirror. Both started from the same image, database and tlog files located on striped disk. Mirror server failed 3 times in last 2 months with errors: EventID 823 The operating system returned error 2(The system cannot find the file specified.) to SQL Server during a write at offset 0x00000048058a00 in file 'D:\TLogs***_log.ldf'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online. and EventID 1454 Database mirroring will be suspended. Server instance 'xxxxxxxxxx' encountered error 823, state 6, severity 24 when it was acting as a mirroring partner for database '***'. The database mirroring partners might try to recover automatically from the error and resume the mirroring session. For more information, view the error log for additional error messages. followed by EventID 19019 The MSSQLSERVER service terminated unexpectedly. After this rebooting instance is necessary to restore mirroring. First two times I thought it was hardware related (striped disk failure) and relaunched instance on new hardware. But the issue is back after few weeks again. It only affects mirror instances. Any help would be really appreciated. Thanks.

    Read the article

  • Kernel hacking methodology - how to find out where to hack the linux kernel

    - by Flavius
    I have a throw-away cheap laptop I'd like to twiddle around, a Thinkpad SL 500. What bothers me are two leds, the one for wireless connectivity, and the one for hibernation, which don't light up at all, although they're functional, I've tried it on windows. So I would like to write a kernel driver for them, nothing big, it just looks like a good idea to play around with the kernel. My question is what methodology should I follow systematically to find out what devices are responsible for those leds (in general, not necessarily specific to my hardware), and what drivers are responsible for the other two leds that work, bluetooth and the battery indicator? And when I say methodology, I really mean the methodology, step by step, with reasons for each step, like in the answer I've gave to someone else over here: What does && mean in void *p = &&abc; I am profficient at fgrepping through big code repositories, using static code analysers & co, but I think my lack of hardware knowledge hinders me on this problem. PS: I'm using ArchLinux, so almost the latest kernel version.

    Read the article

  • Creating basic, redundant gigE or IB storage network for Xen?

    - by StaringSkyward
    With only a modest budget, I want to move my 4 xen servers over to network storage -either NFS or iSCSI which will be determined based on how well it performs when we test it (we need good throughput and it must continue to work through link and switch failure tests). We may add another couple of xen servers at some point when this is done. I don't know much about the design and operation of storage networks, so would really appreciate some hints from those with experience. The budget is around $3,800 excluding the storage appliance. I am currently thinking these are my options to remain on budget: 1) Go for used infiniband hardware and aim for 10gb performance. 2) Stick with gig ethernet and buy some new switches (cisco or procurve) to create a storage-only ethernet LAN. Upgrade to 10gigE later but try to use hardware capable of it where possible to reduce upgrade costs. I have seen used, warrantied infiniband switches at reasonable prices (presumably because big companies are converging on 10gbit ethernet?) and the promise of cheap 10gb is attractive. I know nothing about IB, so here come the questions: Can I buy 2 x switches and have multiple HBAs in my xen and storage nodes to get redundancy and increased performance without complexity or expensive management software costs? If so, can you point me to some examples? Do NFS and iSCSI work just the same regardless? Is IB a sensible choice or could/should I use ethernet or FC on the same budget - I'm keen not to get boxed into a corner for future upgrades, however. For the storage I am likely to build a storage server using nexentastor with the intention that I can later add more disks, SSDs and add another server to provide a failover option at the storage level. An HP LeftHand starter SAN is also under consideration, too. Thanks in advance.

    Read the article

  • Does AMD Cool n Quiet Slow Down Your System?

    - by Software Monkey
    I discovered today that having AMD Cool n Quiet enabled in my BIOS appears to be slowing down my Windows XP SP2 system by about 29% on memory & CPU intensive workloads. I was wondering if (a) anyone else had encountered this, (b) anyone can offer an explanation, (c) there are any negatives I need to be aware of if I keep AMD CnQ disabled. With some superficial testing so far, I don't immediately notice any difference with CnQ off (other than the performance being what I expected from this new hardware). It seems to ramp up the CPU fan a little bit as my program maxes out 1 core, but that's the same as with CnQ on. And when I let the system idle the CPU fan slows down and the systems as quiet as a mouse (after years of 6 small fans churning like they want to go into orbit it's nice to again have a system where I can hear the HDDs seeking). Bonus question: Does CnQ cause issues with system stability? I ask because the reason I disabled it was because I have had a few freezes and 1 spontaneous reboot with my new hardware.

    Read the article

  • VMware and Windows Activation

    - by Peter M
    Yesterday I installed Slysoft's Virtual CloneDrive in order to mount an iso for some software installation on my host system (XP Pro SP3) This morning I fired up VMware and made a linked clone of an existing XP vm in order to do some software testing. This is the sort of thing that I do all the time, and the base XP vm that I clone was activated a long long time ago. The surprise today was that the newly cloned vm was no longer activated and XP cited major changes in hardware as the reason. I repeated the test with a full clone of the base system and got the same message. I then started up my base vm and it seemed to be activated, yet another vm (which I fully cloned from the base vm a long time ago) now started reporting that XP was not activated. At this point I guessed that Virtual DriveClone might have been the source of my hardware differences so I uninstalled it and rebooted. After this I made a new linked clone and full clone of the base vm and XP did not complain about not being activated. So I seem to be back to where I was before installing Virtual DriveClone with the exception that that one particular XP vm continues to complain about activation (even though 4 or 5 other XP vm's are fat and happy) Now to my questions: Why would adding Virtual CloneDrive to the host system affect XP activation on the vm's? From their point of view I would have thought that the environment had not changed as I had not enabled any new hard drives in their systems. Or is adding a hard drive to the host system enough to upset XP activation? Since this event, one of my fully cloned vm's is still reporting that XP is not activated even though I have removed Virtual CloneDrive. Is there anyway to convince XP that it is on the same system as yesterday? Or are my only options to do an activation or restore the vm from a previous backup?

    Read the article

  • Media Center setup won't complete for watching TV

    - by Robert
    I have a problem watching TV in Media Center. The TV constantly pauses 1/2 second then plays 1 second, pauses 1/2 second, plays 1 second - it is constant and does not vary. This problem occurs on all channels, live or recorded. The bottom 5th of the screen is solid green. I know the problem is Media Center because I can use Pinnacle's TVCenterPro and there is no skipping/pausing (and not green on bottom). I was using cable, and switched to DirecTV (satellite). Trying to do "Set up TV signal" in Media Center seems to be what broke it. I get an error "IR Hardware not detected." I can use the remote to "try again" - so the IR hardware works fine (Media Center's remote/sensor). I tried plugging the IR Blaster into both ports, and I tried a different USB port for the IR receiver. I can't complete the setup. Media Center was playing it okay before I tried to run setup. (I ran setup to try to do recording with Media Center.) Pinnacle PCTV 800i HD PCI card (coax cable from DirecTV tuner), ATI Radeon HD 3200 Graphics, Windows XP SP3 Media Center Edition, AMD Athlon Dual Core 2.5 GHz, 1.75 GB RAM.

    Read the article

  • Value of Itanium over x86_64 for Oracle Deployment

    - by Antitribu
    We are looking at a new environment to run our Oracle Database running on SUSE (potentially migrating to RedHat). Our database is approximately 100GB and performs adequately on our current hardware (x86_64) with approximately 6GB of ram allocated to it. We are growing quickly however and will require more performance shortly. Given the cost of Oracle licenses we would like to maximize the value from each license by choosing the most appropriate CPU to run the software on. The questions are: Are there substantial benefits to looking at Itanium hardware, are there any drawbacks? Is there a point where Itanium starts to scale out better? What are the long term support options for Itanium? Given the dominance of x86 would it be safer long term to stick with x86? On average what would be the performance benefit of implementing an Oracle database on Itanium over x86_64? Is this an issue at all or will other factors (IO/RAM) cap out first? If anyone can point me towards some solid documentation on comparisons between the two platforms that provides good case analysis of when to choose which I'm more than happy to accept that as an answer.

    Read the article

  • Windows Virtual Machines will not run

    - by jlego
    I'm trying to setup a few virtual machines to use for testing websites in the various old versions of IE. I had Microsoft Virtual PC working on an older machine using XP mode and 2 other VHD's from Microsoft that allowed me to test in IE6-IE8. I've recently gotten a new work machine and am trying to set up the VMs again for testing, however nothing seems to be working. Both the old and the new system run Windows 7 64-bit Ultimate with AMD processors. I downloaded Virtual PC & XP mode from here http://www.microsoft.com/windows/virtual-pc/download.aspx and go through the installation process. XP mode is installed, but when I try to run it it goes through the initial setup process only to fail when it is almost complete with the error "Cannot Complete Setup". (After googling I see that this might be a conflict with my processor) I download other VHD's from here http://www.microsoft.com/windows/virtual-pc/download.aspx in order to get the other versions of IE and try to set those up in Virtual PC as well. I click on them to start the machine and both Windows 7 with IE8 and Windows Vista with IE7 just hang at a black screen. I try to use Virtual Box instead, and I get Windows XP with IE6 running, but I have no internet connection in the VM. I try all different settings and try to google the correct settings but nothing seems to work. When I load the VM, XP shows that its found new hardware but it needs the drivers. One of these pieces of hardware is the network adapter, but I can't connect to the internet to download the driver in the guest OS. VirtualBox tells me I need to install extensions in order for things to function properly. I go through the installation process in the guest OS and restart the VM, however now XP is asking for validation and I can't access the VM. I try installing the other 2 OS (Vista & 7) but I get a BSOD right after the startup screen appears and the VM restarts itself. I'm getting so frustrated trying to make this work, I would really appreciate any assistance on getting the VMs up and running or any alternatives for testing websites in Internet Explorer.

    Read the article

  • Why won't dhclient use the static IP I'm telling it to request?

    - by mike
    Here's my /etc/dhcp3/dhclient.conf: request subnet-mask, broadcast-address, time-offset, routers, domain-name, domain-name-servers, domain-search, host-name, netbios-name-servers, netbios-scope, interface-mtu; timeout 60; reject 192.168.1.27; alias { interface "eth0"; fixed-address 192.168.1.222; } lease { interface "eth0"; fixed-address 192.168.1.222; option subnet-mask 255.255.255.0; option broadcast-address 255.255.255.255; option routers 192.168.1.254; option domain-name-servers 192.168.1.254; } When I run "dhclient eth0", I get this: There is already a pid file /var/run/dhclient.pid with pid 6511 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ wmaster0: unknown hardware address type 801 wmaster0: unknown hardware address type 801 Listening on LPF/eth0/00:1c:25:97:82:20 Sending on LPF/eth0/00:1c:25:97:82:20 Sending on Socket/fallback DHCPREQUEST of 192.168.1.27 on eth0 to 255.255.255.255 port 67 DHCPACK of 192.168.1.27 from 192.168.1.254 bound to 192.168.1.27 -- renewal in 1468 seconds. I used strace to make sure that dhclient really is reading that conf file. Why isn't it paying attention to my "reject 192.168.1.27" and "fixed-address 192.168.1.222" lines?

    Read the article

  • vmdk Recovery after migration from 3.5 to 4 and fallback tentative.

    - by olgirard
    Hy, I've tryed to migrate some VM from my 3.5i environment to a brand new vSphere 4.0 U1. The two platforms are running simultaneously, sharing the same SAN. I Migrate my VM by stopping it, unregistering in vcenter (esx ver. 3.5, i call it esx3), register in vSphere (esx ver. 4, i call it esx4), and migrate upgrade virtual hardware before powering it up (First mistake). vMotion was enabled on esx4, seem to be a second mistake. After a day or so, i encountred problems joigning the esx server (esx4) and decided to unregister my server for esx4 and fallback to esx3. esx3 refused to boot, i supposed this was due to virtual hardware in Version 7 so i recreated a new VM pointing to the vmdk of the old VM. Everithing seemed fine until i log into the server and discover that i was running on the original disk ith every snapshots ignored even those created on esx3. I tried to reboot VM on esx4 but VM doesn't power up because "The parent virtual disk has been modified since the child was created". I've got a copy of a later state of the drive but generated between two snapshots (ovf generated with canverter standalone) as a backup. Do i have a chance to recover at least some files on the virtual drive or (as i tink) all is played, i've done enought mistakes for this time. Thanks for your help.

    Read the article

  • How to get multipath working for Ubuntu Server 12.04

    - by mlampi
    I'm working on a project which aims to make use of Ubuntu servers running on enterprise class hardware. In our case that means IBM HS23E blade servers, QLogic 4GB fibre channel extension cards and quite old IBM DS4500 disk array with two controllers. At the moment we have fibre channel as only boot option and Ubuntu Server 12.04 installed just fine and is able to boot without multipath. I'm not a linux professional myself but in our team we have people who will understand the technical stuff. Don't let my post confuse :) The current situation is that we have only one fibre channel connection to a single disk array controller. Real life case would be of course quite different. At minimum we should have two fibre channel ports connected to two different switches and two different controllers. However, we have no idea how to set up multipath tool. Is the DM-MPIO the right software? At minimum we should be able to boot when multiple connections are available and achieve fault tolerance when any of them should be down. Since the disk array is not the latest hardware, I managed to find RDAC driver sources only for 2.6.x kernel. And we have 3.2.x. Another issue is to build a multipath.conf. The said driver sources are from IBM support and the QLogic drivers provided to Ubuntu installer are from Ubuntu site. It seems that RHEL and SLES would have near out of the box support but that is not an option for our project. Actual questions: - What is the recommended software tool for multipath for Ubuntu Server 12.04? - Is there available pre-made configurations or templates? Does it require disk array / controller specific settings or do a more generic config work? - Do you have expriences on similar setup and like to share the knowledge? I'll provide you with any additional information you might require. Thanks in advance.

    Read the article

  • Upgrade an Ubuntu 8.04 installation with VMware Server 1.0.8 and lots of guest OSes to Something Els

    - by Glyph
    I have an Ubuntu 8.04 (Hardy Heron) host machine which is running a whole slew of virtual machines in VMWare Server 1.0.8. Among other guest OSes, there is every release version of Ubuntu since 6.06, OpenSolaris 2009.06, and Windows XP. Right now I access these VMs from a variety of client OSes as well; Linux and Windows via the VMWare server console, and MacOS via X-forwarding the host machine's server console. I'd like to upgrade the host to Ubuntu 10.04 (Lucid Lynx), but from what I can tell, getting VMWare Server 1.x to work on a more recent version of Linux is a real pain. While VMware Server 2.x is a bit easier, it's still not packaged as Debian packages, so installing security updates is a big chore. As long as I'm upgrading anyway, I'd like to move to a virtualization solution that will allow me to automate applying updates. The options that I'm aware of right now are KVM (managed via virt-manager) and VirtualBox (as managed by its own tools or via its own libvirt bindings), but I'm open to other suggestions. For each option, I'd like to know how do I convert my guest images to the new format? am I going to have to re-activate my Windows guests (alternatively, "If the virtual hardware is different by default, can I avoid re-activation by changing some virtualization configuration to provide me with more similar virtual hardware") what are the management options like for each client OS (mac, linux, windows)? Thanks.

    Read the article

  • Shared firewall or multiple client specific firewalls?

    - by Tauren
    I'm trying to determine if I can use a single firewall for my entire network, including customer servers, or if each customer should have their own firewall. I've found that many hosting companies require each client with a cluster of servers to have their own firewall. If you need a web node and a database node, you also have to get a firewall, and pay another monthly fee for it. I have colo space with several KVM virtualization servers hosting VPS services to many different customers. Each KVM host is running a software iptables firewall that only allows specific ports to be accessed on each VPS. I can control which ports any given VPS has open, allowing a web VPS to be accessed from anywhere on ports 80 and 443, but blocking a database VPS completely to the outside and only allowing a certain other VPS to access it. The configuration works well for my current needs. Note that there is not a hardware firewall protecting the virtualization hosts in place at this time. However, the KVM hosts only have port 22 open, are running nothing except KVM and SSH, and even port 22 cannot be accessed except for inside the netblock. I'm looking at possibly rethinking my network now that I have a client who needs to transition from a single VPS onto two dedicated servers (one web and one DB). A different customer already has a single dedicated server that is not behind any firewall except iptables running on the system. Should I require that each dedicated server customer have their own dedicated firewall? Or can I utilize a single network-wide firewall for multiple customer clusters? I'm familiar with iptables, and am currently thinking I'll use it for any firewalls/routers that I need. But I don't necessarily want to use up 1U of space in my rack for each firewall, nor the power consumption each firewall server will take. So I'm considering a hardware firewall. Any suggestions on what is a good approach?

    Read the article

  • SQL 2008 SP1 crashing almost daily

    - by matijake
    Hey, almost every day our new DB crashes. It is virtual server residing on same hardware as 5 other servers, two of them beeing identical MS SQL2008sp1 and two Oracle 11g's so I can pretty much rule out hardware issues. Server has dedicated local LUN, 4vCPU and 8GB memory with 2GB windows swap file. It runs 4 instances. Primary instance is limited to 5GB memory and paralelism set to 4 running on MS SQL 2008 SP1 @ Windows Server 2008 Enterprise R2 x64. Only that primary instance is crashing. After it crashes nothing can connect to it, it's even impossible to shut it down through service manager. What I found in logs is: ***Stack Dump being sent to C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\LOG\SQLDump0081.txt SqlDumpExceptionHandler: Process 4788 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server i s terminating this process.     Whole log can be seen at: http://kabl.org/files/SQLDump0081.txt second crash log made second later at: http://kabl.org/files/SQLDump0082.txt I have analyzed mini crashdump with Microsoft tools, but no promising results. If it can help, here it is: http://kabl.org/files/SQLDump0081.mdmp Any ideas are greatly welcome, since it is becoming quite a pain in the ass to restart server almost every day :) Regrads, -Matija

    Read the article

  • IIS permission configuration issue

    - by Dan
    Sorry the title of this question is a little ambiguous but I don't really have any idea where the issue lies - I'm seeking some clarification of the server error logs. Basically, I had a dedicated server running Windows 2003 and Plesk (v8 I think). Last week the server hardware failed and the entire thing had to be rebuilt from scratch. New hardware was put in, new operating system (Win2008), new Plesk installation (v9.5), new software (MSSQL etc) then all data ported over manually from old C and D drives to restore all 30 client sites. It was hell! All has been okay for a couple of days now but about an hour ago POP! Suddenly all sites went down giving a 500 error. Restarting all services eventually brought everything back online, but I'm now living in total fear. It can - and probably will - happen again. The guys on support gave me the following errors from the server log: The Template Persistent Cache initialization failed for Application Pool 'ASP.NET v4.0 Classic' because of the following error: Could not create a Disk Cache Sub-directory for the Application Pool. The data may have additional error codes.. The worker process for application pool 'domain1.com(domain)(2.0)(pool)' encountered an error 'Cannot read configuration file ' trying to read configuration data from file '\\?\C:\inetpub\temp\apppools\domain1.com(domain)(2.0)(pool).config', line number '0'. The data field contains the error code. The worker process for application pool 'PleskControlPanel' encountered an error 'Cannot read configuration file ' trying to read configuration data from file '\\?\C:\inetpub\temp\apppools\PleskControlPanel.config', line number '0'. The data field contains the error code. The support guys are so ambiguous about this and it scares me horribly. Can anyone positively identify the cause of this error which lead to all client website going offline? What can be done to prevent it from happening again? Any pointers would be very much appreciated! Thanks folks...

    Read the article

  • NTBackup Error: C: is not a valid drive

    - by Chris
    I'm trying to use NtBackup to back up the C: Drive on a Microsoft Windows Small Business Server 2003 machine and get the following error in the log file: Backup Status Operation: Backup Active backup destination: 4mm DDS Media name: "Media created 04/02/2011 at 21:56" Error: The device reported an error on a request to read data from media. Error reported: Invalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. Error: C: is not a valid drive, or you do not have access. The operation did not successfully complete. I'm using a brand new SATA Quantum Dat-72 drive with a brand new tape (tried a couple of tapes). I carry out the following: Open NTBackup Select Backup Tab Tick the box next to C: Ensure Destination is 4mm DDS Media is set to New Press Start Backup Choose Replace the data on the media and press Start Backup NTBackup tries to mount the media Error Message shows: The device reported an error on a request to read data from media. Error reported: INvalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. On checking the log I find the following: Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8018 Date: 04/02/2011 Time: 22:02:02 User: N/A Computer: SERVER Description: Begin Operation For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. and then; Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8019 Date: 04/02/2011 Time: 22:02:59 User: N/A Computer: SERVER Description: End Operation: The operation was successfully completed. Consult the backup report for more details. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Read the article

  • No headphone or speakers plugged in - Windows 7 issue

    - by Amit Ranjan
    I am facing a wierd issue between my sound card driver and Windows7(any edition). I have a sony vaio notebook (VPCEB24EN). Two days ago, on start I got diabled wifi, charging and speakers. Then I restart the PC and everthing worked fine. Later on I again restarted my machine, and then I found the my speakers were not working. I thought, restart will work. I restarted many more times but it did'nt work. I searched google and found that , it might be due to : 1. Hardware is not switched on from bios. 2. No hardware. 3. overriding 64-bit drivers with 32-bit drivers. To make it working, I restored my laptop from scratched, but while restoring pc, the realtek HD drivers, it gave me an error 505. I then formatted the drive and installed Win7 Ultimate 32bit (With PC was, Win7 64-bit Home Basic). I got lots of yellow exclamation in device manager, thinking now this will resolve my issue. But Even after the installing all drivers on a fresh installation, I was still with the same position. A red cross on speaker- No Speakers or Headphone plugged in. Please Note: My Laptop is Vaio , E Series, VPCEB24EN. Audio : Intel® High Definition Audio compatible but accepts Realted Audio. While using BIOS Agent, I got Intel Chipset 5 Series Audio Adapter and ATI RV370 Audio adapter found on my board. Installed is Win7 32bit Ultimate. factory default was Win7 64-bit Home Basic Memory: RAM 3GB/ 320GB HDD Display : ATI Mobility Radeon™ HD 5145 Graphics

    Read the article

  • Is Unix not a PC Operating System?

    - by Corelgott
    I am doing my Bachelor at a university. In a written assignment the professor posted the task: "Name 3 PC-Operating Systems". Well, I went on an included a variety of OS (Linux, Windows, OSx) including Unix & Solaris. Today I recieved a mail from my prof saying: Unix is not a PC-Operating System. Many Unix-variants are not PC-hardware compatible (like AIX & HP-UX. About Solaris: there was one PC-compatible version...) I am kind of suprised: Even if may Unix-variants are Power-PC and different bit-order – Those don't stop being PCs now, right? The question was given in a written assigment! It was not a question that came up during lecture! Due to the original task being in German, I'll include it just to make sure nobody suspects an error in the translation. Frage: Nennen Sie 3 PC-Betriebssysteme. Antwort: Unix ist kein PC-Betriebssystem, viele Unix-Varianten sind nicht auf PC-Hardware lauffähig (AIX, HP-UX). Von Solaris gab es mal eine PC-Variante.

    Read the article

  • How to use Timer broadcast on Multi-Processor system with linux 3.10?

    - by kevin.ji
    Hardware: ARM Cortex-A9 * 2 Software: linux-3.10.0 The platform has 2 cores of arm cortex-a9. Item CONFIG_LOCAL_TIMERS is not set in linux menuconfig. I want to use only one hardware timer to supply tick for all cpu. Interrupts looks like: CPU0 CPU1 57: 6697 0 GIC timer 81: 213 0 GIC uart-pl011 103: 0 0 GIC gmac0 104: 0 0 GIC gmac1 IPI0: 0 1 CPU wakeup interrupts IPI1: 0 0 Timer broadcast interrupts IPI2: 967 866 Rescheduling interrupts IPI3: 0 0 Function call interrupts IPI4: 1 2 Single function call interrupts IPI5: 0 0 CPU stop interrupts IPI6: 0 0 CPU backtrace Err: 0 Timer broadcast interrupts counter does not add. And it looks like that cpu1 does not work at all.But this method works well with linux-3.4, and the interrupt info looks as below in linux-3.4: # cat /proc/interrupts CPU0 CPU1 57: 8596 0 GIC timer 81: 91 0 GIC uart-pl011 103: 0 0 GIC gmac0 104: 0 0 GIC gmac1 IPI0: 0 8560 Timer broadcast interrupts IPI1: 884 1020 Rescheduling interrupts IPI2: 0 0 Function call interrupts IPI3: 0 6 Single function call interrupts IPI4: 0 0 CPU stop interrupts IPI5: 0 0 CPU backtrace Err: 0 The count of Timer broadcast interrupts is adding. And all of cpus work well. I don't know why. Any answer is welcome. :)

    Read the article

  • Ubuntu 10.04 freezing and Ctrl + Alt + Backspace does nothing but music keeps playing

    - by Bryce Thomas
    I'm having intermittent problems where the screen will freeze in Ubuntu. I've tried using Ctrl + Alt + Backspace to restart the X-server, though this does nothing. When the freeze occurs, there's a small square of black dashes around the mouse pointer - maybe 1 inch in size. These dashes look a lot like a 2d barcode. The rest of the screen looks normal, but I can't move the mouse and none of the keyboard shortcuts work to do anything. However, music that I begin playing before the freeze continues to play, which seems to indicate it hasn't stalled up completely. I've noticed a similar freezing problem when I'm using Windows 7. That is, I see the same barcode like dashes around the mouse pointer when it freezes up. So I'm guessing it's either a driver or hardware problem. I thought if it was a hardware problem though, the whole computer might stop working (i.e. music would stop playing)? The video card I am using is an Nvidia, and I believe it's in the 7600 range. In Ubuntu I have the drivers for the card set to the latest available (proprietary). Ideally I'd like to be able to continue using the proprietary drivers. Is there any known issues with the drivers for this model graphics card, or has anyone experienced the same problem and knows how to fix it?

    Read the article

< Previous Page | 133 134 135 136 137 138 139 140 141 142 143 144  | Next Page >