Search Results

Search found 11077 results on 444 pages for 'no such ip'.

Page 137/444 | < Previous Page | 133 134 135 136 137 138 139 140 141 142 143 144  | Next Page >

  • Can't access apache from outsite my local network

    - by valter
    UPDATED: Now, when I type my external ip like xxx.xxx.xxx.xxx:8079, i can access xampp defaults page. But the strange is that when someone else from outside my network, try to access it using the same ip, it doesnt work. I Think it should, because its the external ip. I'm getting crazy. I have tried for hours to access xampp defaults page from outside my local network. My ISP blocks port 80 and 8080. So I changed apache to listen to port 8079 Listen 8079 My local computer ip is 10.1.1.2 I can access the webserver, from any computer on my local network when I type http://10.1.1.2:8079 I also oppended the port 8079 on my modem, as the image shows bellow. (I think i did it right) When apache is running on my computer, if I test the port 8079 at http://canyouseeme.org/ i get the message "Success: I can see your service on xxx.xxx.xxx.xxx on port (8079) Your ISP is not blocking port 8079" If apache is not running I get "Error: I could not see your service on xxx.xxx.xxx.xxx on port (8079) Reason: Connection refused". So, it's clear that the port 8079 is oppened. But when I type xxx.xxx.xxx.xxx:8079 on google chrome for example, I get Oops! Google Chrome could not connect to xxx.xxx.xxx.xxx:8079 What can I do to solve this, to allow apache to server the pages? I don't know what else I shoud configure. Please, help me. Thanks.

    Read the article

  • oracle access on vmware fusion

    - by gaudi_br
    Hello, I'm running snow leopard and I'm doing some development that requires some network knowledge. I've installed vmware fusion 3.0 and I've set up a virtual machine with windows 2003 server. I need to mimic the exact configuration of another server in the network, so I really need to run the versions I'll be mentioning here. Besides, I set up two network configurations on the VM: one NAT config (so that I can have internet access) and one host-only config (because I need to use another server's mac adress and my local area network might have a problem with it) From the installation of windows 2003, I then installed oracle 10.2.0.1. During the installation I received a warning about the primary ip-address of the system being dhcp assigned, but I ignored it (maybe it was a mistake)... Now, from experience, unless the DHCP assigned address changes, I should be able to access the guest system's database from the host system, so I went to safari and tried to access the oracle em. As it turns out, because my computer is on a company network, the company's DNS doesn't know about the virtual machine, unless of course I switch to a bridged network config. However, I don't want to do that because I don't to mix up the domains. So I guess the question is, how can I define my own dns or router, or whatever it is that I need to define so that whenever I try the guest system's ip address form the host, it will use the vmnet1 or vmnet8 interface define by vmware and bypass the dns configuration of my local area network. I'd also like to know what to do incase I want to change ip addresses on the guest machine without having oracle go haywire (I've noticed a few folders on the structure which are specific for the very first IP Address)... Any help would be appreciated. Thanks in advance.

    Read the article

  • Trouble linking libboost libraries to compile sslsniff on RHEL

    - by rwong48
    Trying to build sslsniff on a RHEL 5.2 system here. When compiling sslsniff on RHEL I hit the same errors when using libboost packages (from repositories like rpmforge) and compiling libboost from source (which appeared to be successful.) I tried this on a fresh system as well (no previous/failed/garbage installs of libboost etc.) # make g++ -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"sslsniff\" -DVERSION=\"0.6\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -I. -ggdb -g -O2 -MT SSLConnectionManager.o -MD -MP -MF .deps/SSLConnectionManager.Tpo -c -o SSLConnectionManager.o SSLConnectionManager.cpp mv -f .deps/SSLConnectionManager.Tpo .deps/SSLConnectionManager.Po g++ -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"sslsniff\" -DVERSION=\"0.6\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -I. -ggdb -g -O2 -MT FirefoxUpdater.o -MD -MP -MF .deps/FirefoxUpdater.Tpo -c -o FirefoxUpdater.o FirefoxUpdater.cpp mv -f .deps/FirefoxUpdater.Tpo .deps/FirefoxUpdater.Po g++ -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"sslsniff\" -DVERSION=\"0.6\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -I. -ggdb -g -O2 -MT Logger.o -MD -MP -MF .deps/Logger.Tpo -c -o Logger.o Logger.cpp mv -f .deps/Logger.Tpo .deps/Logger.Po g++ -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"sslsniff\" -DVERSION=\"0.6\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -I. -ggdb -g -O2 -MT SessionCache.o -MD -MP -MF .deps/SessionCache.Tpo -c -o SessionCache.o SessionCache.cpp mv -f .deps/SessionCache.Tpo .deps/SessionCache.Po g++ -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"sslsniff\" -DVERSION=\"0.6\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -I. -ggdb -g -O2 -MT SSLBridge.o -MD -MP -MF .deps/SSLBridge.Tpo -c -o SSLBridge.o SSLBridge.cpp mv -f .deps/SSLBridge.Tpo .deps/SSLBridge.Po g++ -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"sslsniff\" -DVERSION=\"0.6\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -I. -ggdb -g -O2 -MT HTTPSBridge.o -MD -MP -MF .deps/HTTPSBridge.Tpo -c -o HTTPSBridge.o HTTPSBridge.cpp mv -f .deps/HTTPSBridge.Tpo .deps/HTTPSBridge.Po g++ -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"sslsniff\" -DVERSION=\"0.6\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -I. -ggdb -g -O2 -MT sslsniff.o -MD -MP -MF .deps/sslsniff.Tpo -c -o sslsniff.o sslsniff.cpp mv -f .deps/sslsniff.Tpo .deps/sslsniff.Po g++ -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"sslsniff\" -DVERSION=\"0.6\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -I. -ggdb -g -O2 -MT FingerprintManager.o -MD -MP -MF .deps/FingerprintManager.Tpo -c -o FingerprintManager.o FingerprintManager.cpp mv -f .deps/FingerprintManager.Tpo .deps/FingerprintManager.Po g++ -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"sslsniff\" -DVERSION=\"0.6\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -I. -ggdb -g -O2 -MT AuthorityCertificateManager.o -MD -MP -MF .deps/AuthorityCertificateManager.Tpo -c -o AuthorityCertificateManager.o `test -f 'certificate/AuthorityCertificateManager.cpp' || echo './'`certificate/AuthorityCertificateManager.cpp mv -f .deps/AuthorityCertificateManager.Tpo .deps/AuthorityCertificateManager.Po g++ -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"sslsniff\" -DVERSION=\"0.6\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -I. -ggdb -g -O2 -MT TargetedCertificateManager.o -MD -MP -MF .deps/TargetedCertificateManager.Tpo -c -o TargetedCertificateManager.o `test -f 'certificate/TargetedCertificateManager.cpp' || echo './'`certificate/TargetedCertificateManager.cpp mv -f .deps/TargetedCertificateManager.Tpo .deps/TargetedCertificateManager.Po g++ -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"sslsniff\" -DVERSION=\"0.6\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -I. -ggdb -g -O2 -MT CertificateManager.o -MD -MP -MF .deps/CertificateManager.Tpo -c -o CertificateManager.o `test -f 'certificate/CertificateManager.cpp' || echo './'`certificate/CertificateManager.cpp mv -f .deps/CertificateManager.Tpo .deps/CertificateManager.Po g++ -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"sslsniff\" -DVERSION=\"0.6\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -I. -ggdb -g -O2 -MT HttpBridge.o -MD -MP -MF .deps/HttpBridge.Tpo -c -o HttpBridge.o `test -f 'http/HttpBridge.cpp' || echo './'`http/HttpBridge.cpp mv -f .deps/HttpBridge.Tpo .deps/HttpBridge.Po g++ -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"sslsniff\" -DVERSION=\"0.6\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -I. -ggdb -g -O2 -MT HttpConnectionManager.o -MD -MP -MF .deps/HttpConnectionManager.Tpo -c -o HttpConnectionManager.o `test -f 'http/HttpConnectionManager.cpp' || echo './'`http/HttpConnectionManager.cpp mv -f .deps/HttpConnectionManager.Tpo .deps/HttpConnectionManager.Po g++ -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"sslsniff\" -DVERSION=\"0.6\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -I. -ggdb -g -O2 -MT HttpHeaders.o -MD -MP -MF .deps/HttpHeaders.Tpo -c -o HttpHeaders.o `test -f 'http/HttpHeaders.cpp' || echo './'`http/HttpHeaders.cpp mv -f .deps/HttpHeaders.Tpo .deps/HttpHeaders.Po g++ -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"sslsniff\" -DVERSION=\"0.6\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -I. -ggdb -g -O2 -MT UpdateManager.o -MD -MP -MF .deps/UpdateManager.Tpo -c -o UpdateManager.o UpdateManager.cpp mv -f .deps/UpdateManager.Tpo .deps/UpdateManager.Po g++ -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"sslsniff\" -DVERSION=\"0.6\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -I. -ggdb -g -O2 -MT OCSPDenier.o -MD -MP -MF .deps/OCSPDenier.Tpo -c -o OCSPDenier.o `test -f 'http/OCSPDenier.cpp' || echo './'`http/OCSPDenier.cpp mv -f .deps/OCSPDenier.Tpo .deps/OCSPDenier.Po g++ -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"sslsniff\" -DVERSION=\"0.6\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -I. -ggdb -g -O2 -MT FirefoxAddonUpdater.o -MD -MP -MF .deps/FirefoxAddonUpdater.Tpo -c -o FirefoxAddonUpdater.o FirefoxAddonUpdater.cpp mv -f .deps/FirefoxAddonUpdater.Tpo .deps/FirefoxAddonUpdater.Po g++ -ggdb -g -O2 -lssl -lboost_filesystem -lpthread -lboost_thread -llog4cpp -o sslsniff SSLConnectionManager.o FirefoxUpdater.o Logger.o SessionCache.o SSLBridge.o HTTPSBridge.o sslsniff.o FingerprintManager.o AuthorityCertificateManager.o TargetedCertificateManager.o CertificateManager.o HttpBridge.o HttpConnectionManager.o HttpHeaders.o UpdateManager.o OCSPDenier.o FirefoxAddonUpdater.o SSLConnectionManager.o: In function `__static_initialization_and_destruction_0': /usr/local/include/boost/system/error_code.hpp:208: undefined reference to `boost::system::get_system_category()' /usr/local/include/boost/system/error_code.hpp:209: undefined reference to `boost::system::get_generic_category()' /usr/local/include/boost/system/error_code.hpp:214: undefined reference to `boost::system::get_generic_category()' /usr/local/include/boost/system/error_code.hpp:215: undefined reference to `boost::system::get_generic_category()' /usr/local/include/boost/system/error_code.hpp:216: undefined reference to `boost::system::get_system_category()' There's more, but I guess there's a post length limit.. Most of them appear related to boost::system so I added -lboost_system to the linker command and got farther: # g++ -ggdb -g -O2 -lssl -lboost_filesystem -lpthread -lboost_thread -llog4cpp -o sslsniff SSLConnectionManager.o FirefoxUpdater.o Logger.o SessionCache.o SSLBridge.o HTTPSBridge.o sslsniff.o FingerprintManager.o AuthorityCertificateManager.o TargetedCertificateManager.o CertificateManager.o HttpBridge.o HttpConnectionManager.o HttpHeaders.o UpdateManager.o OCSPDenier.o FirefoxAddonUpdater.o -lboost_system SSLConnectionManager.o: In function `thread<boost::_bi::bind_t<void, boost::_mfi::mf3<void, SSLConnectionManager, boost::shared_ptr<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >, boost::asio::ip::basic_endpoint<boost::asio::ip::tcp>, bool>, boost::_bi::list4<boost::_bi::value<SSLConnectionManager*>, boost::_bi::value<boost::shared_ptr<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::value<boost::asio::ip::basic_endpoint<boost::asio::ip::tcp> >, boost::_bi::value<bool> > > >': /usr/local/include/boost/thread/detail/thread.hpp:191: undefined reference to `boost::thread::start_thread()' SSLConnectionManager.o: In function `~thread_data': /usr/local/include/boost/thread/detail/thread.hpp:40: undefined reference to `boost::detail::thread_data_base::~thread_data_base()' /usr/local/include/boost/thread/detail/thread.hpp:40: undefined reference to `boost::detail::thread_data_base::~thread_data_base()' /usr/local/include/boost/thread/detail/thread.hpp:40: undefined reference to `boost::detail::thread_data_base::~thread_data_base()' /usr/local/include/boost/thread/detail/thread.hpp:40: undefined reference to `boost::detail::thread_data_base::~thread_data_base()' Now the errors are related to boost::detail and boost::filesystem::detail. I've tried using boost 1.35 and 1.42 (latest). On my own Ubuntu system, I installed the libraries from Ubuntu repositories and I was able to compile+link sslsniff just fine. Thanks in advance.

    Read the article

  • Please Critique this PHP Login Script

    - by NightMICU
    Greetings, A site I developed was recently compromised, most likely by a brute force or Rainbow Table attack. The original log-in script did not have a SALT, passwords were stored in MD5. Below is an updated script, complete with SALT and IP address banning. In addition, it will send a Mayday email & SMS and disable the account should the same IP address or account attempt 4 failed log-ins. Please look it over and let me know what could be improved, what is missing, and what is just plain strange. Many thanks! <?php //Start session session_start(); //Include DB config include $_SERVER['DOCUMENT_ROOT'] . '/includes/pdo_conn.inc.php'; //Error message array $errmsg_arr = array(); $errflag = false; //Function to sanitize values received from the form. Prevents SQL injection function clean($str) { $str = @trim($str); if(get_magic_quotes_gpc()) { $str = stripslashes($str); } return $str; } //Define a SALT, the one here is for demo define('SALT', '63Yf5QNA'); //Sanitize the POST values $login = clean($_POST['login']); $password = clean($_POST['password']); //Encrypt password $encryptedPassword = md5(SALT . $password); //Input Validations //Obtain IP address and check for past failed attempts $ip_address = $_SERVER['REMOTE_ADDR']; $checkIPBan = $db->prepare("SELECT COUNT(*) FROM ip_ban WHERE ipAddr = ? OR login = ?"); $checkIPBan->execute(array($ip_address, $login)); $numAttempts = $checkIPBan->fetchColumn(); //If there are 4 failed attempts, send back to login and temporarily ban IP address if ($numAttempts == 1) { $getTotalAttempts = $db->prepare("SELECT attempts FROM ip_ban WHERE ipAddr = ? OR login = ?"); $getTotalAttempts->execute(array($ip_address, $login)); $totalAttempts = $getTotalAttempts->fetch(); $totalAttempts = $totalAttempts['attempts']; if ($totalAttempts >= 4) { //Send Mayday SMS $to = "[email protected]"; $subject = "Banned Account - $login"; $mailheaders = 'From: [email protected]' . "\r\n"; $mailheaders .= 'Reply-To: [email protected]' . "\r\n"; $mailheaders .= 'MIME-Version: 1.0' . "\r\n"; $mailheaders .= 'Content-type: text/html; charset=iso-8859-1' . "\r\n"; $msg = "<p>IP Address - " . $ip_address . ", Username - " . $login . "</p>"; mail($to, $subject, $msg, $mailheaders); $setAccountBan = $db->query("UPDATE ip_ban SET isBanned = 1 WHERE ipAddr = '$ip_address'"); $setAccountBan->execute(); $errmsg_arr[] = 'Too Many Login Attempts'; $errflag = true; } } if($login == '') { $errmsg_arr[] = 'Login ID missing'; $errflag = true; } if($password == '') { $errmsg_arr[] = 'Password missing'; $errflag = true; } //If there are input validations, redirect back to the login form if($errflag) { $_SESSION['ERRMSG_ARR'] = $errmsg_arr; session_write_close(); header('Location: http://somewhere.com/login.php'); exit(); } //Query database $loginSQL = $db->prepare("SELECT password FROM user_control WHERE username = ?"); $loginSQL->execute(array($login)); $loginResult = $loginSQL->fetch(); //Compare passwords if($loginResult['password'] == $encryptedPassword) { //Login Successful session_regenerate_id(); //Collect details about user and assign session details $getMemDetails = $db->prepare("SELECT * FROM user_control WHERE username = ?"); $getMemDetails->execute(array($login)); $member = $getMemDetails->fetch(); $_SESSION['SESS_MEMBER_ID'] = $member['user_id']; $_SESSION['SESS_USERNAME'] = $member['username']; $_SESSION['SESS_FIRST_NAME'] = $member['name_f']; $_SESSION['SESS_LAST_NAME'] = $member['name_l']; $_SESSION['SESS_STATUS'] = $member['status']; $_SESSION['SESS_LEVEL'] = $member['level']; //Get Last Login $_SESSION['SESS_LAST_LOGIN'] = $member['lastLogin']; //Set Last Login info $updateLog = $db->prepare("UPDATE user_control SET lastLogin = DATE_ADD(NOW(), INTERVAL 1 HOUR), ip_addr = ? WHERE user_id = ?"); $updateLog->execute(array($ip_address, $member['user_id'])); session_write_close(); //If there are past failed log-in attempts, delete old entries if ($numAttempts > 0) { //Past failed log-ins from this IP address. Delete old entries $deleteIPBan = $db->prepare("DELETE FROM ip_ban WHERE ipAddr = ?"); $deleteIPBan->execute(array($ip_address)); } if ($member['level'] != "3" || $member['status'] == "Suspended") { header("location: http://somewhere.com"); } else { header('Location: http://somewhere.com'); } exit(); } else { //Login failed. Add IP address and other details to ban table if ($numAttempts < 1) { //Add a new entry to IP Ban table $addBanEntry = $db->prepare("INSERT INTO ip_ban (ipAddr, login, attempts) VALUES (?,?,?)"); $addBanEntry->execute(array($ip_address, $login, 1)); } else { //increment Attempts count $updateBanEntry = $db->prepare("UPDATE ip_ban SET ipAddr = ?, login = ?, attempts = attempts+1 WHERE ipAddr = ? OR login = ?"); $updateBanEntry->execute(array($ip_address, $login, $ip_address, $login)); } header('Location: http://somewhere.com/login.php'); exit(); } ?>

    Read the article

  • Problems configuring nameserver in plesk

    - by Saif Bechan
    Hello, i have some troubles with setting up a nameserver in PLESK for months now. I have tried all possible scenario's but i can not get this to work. I am really in need for some help, and if you can i will really appreciate it. Basically what i want is to just set up a nameserver in PLESK. I have a primary IP, and my host gave me a secondary nameserver i can use. My host is leaseweb in the netherlands. I have made some screenshots of the important parts in my opinion, maybe you guys can see some errors in them. To use the secondary nameserver provided by leaseweb i had to enable ACL on that account, i did so and made a screenshot of that too. The DNS recursion is set to localnets. These settings have not changed for months, so the dns should be fully updated everywhere. The check i run is the following: https://www.sidn.nl/over-nl/aanvraag...-server-check/ Domeinnaam (inclusief .nl): rdshosting.nl Eerste Nameserver: ns1.rdshosting.nl Eerste IP: 62.212.66.33 Tweede Nameserver: ns7.leaseweb.net Tweede ip: 62.212.76.50 If i run the dns check of the netherlands it gives me the following errors: primary name server "ns1.rdshosting.nl." Error: specified name server is not listed as NS record. All public name servers for a domain must also be listed as NS records in the zone of the domain. This domain was specified explicitly as a name server, but not found in the zone description of the primary name server. TE.6a rdshosting.nl. 86400 IN SOA ns1.rdspartners.nl. saif2k.hotmail.com. (2010031102 12H 1H 7D 3H) Error: the MNAME in SOA says "ns1.rdspartners.nl." is the primary name server. The MNAME field in the SOA record (first parameter) lists a different primary name server from the one specified for this check. RFC1035 section 3.3.13 rdshosting.nl. 86400 IN NS ns1.rdspartners.nl. Warning: hidden name server "ns1.rdspartners.nl." never used for first contact. The zone contains an NS record for a host which is not in the list of specified name servers. Hence, this name server will not be used to initiate contact to the domain. It may be used in sequential lookups, so it may still be useful. secondary name server "ns1.rdspartners.nl." [BROKEN] [HIDDEN] Failure: name server at 77.232.85.129 cannot be reached: (unknown error) The name server could not be contacted, which may be due to temporary technical problems or global DNS configuration mistakes. The internal error is shown, but not always clear about the cause. secondary name server "ns7.leaseweb.net." Info: name server looks correctly configured. I have the content of the file etc/named.conf also: // $Id: named.conf,v 1.1.1.1 2001/10/15 07:44:36 kap Exp $ // // Refer to the named(8) man page for details. If you are ever going // to setup a primary server, make sure you've understood the hairy // details of how DNS is working. Even with simple mistakes, you can // break connectivity for affected parties, or cause huge amount of // useless Internet traffic. options { allow-recursion { localnets; }; directory "/var"; auth-nxdomain no; pid-file "/var/run/named/named.pid"; // In addition to the "forwarders" clause, you can force your name // server to never initiate queries of its own, but always ask its // forwarders only, by enabling the following line: // // forward only; // If you've got a DNS server around at your upstream provider, enter // its IP address here, and enable the line below. This will make you // benefit from its cache, thus reduce overall DNS traffic in the Internet. /* forwarders { 127.0.0.1; }; */ /* * If there is a firewall between you and nameservers you want * to talk to, you might need to uncomment the query-source * directive below. Previous versions of BIND always asked * questions using port 53, but BIND 8.1 uses an unprivileged * port by default. */ // query-source address * port 53; /* * If running in a sandbox, you may have to specify a different * location for the dumpfile. */ // dump-file "s/named_dump.db"; }; //Use with the following in named.conf, adjusting the allow list as needed: key "rndc-key" { algorithm hmac-md5; secret "CeMgS23y0oWE20nyv0x40Q=="; }; controls { inet 127.0.0.1 port 953 allow { 127.0.0.1; } keys { "rndc-key"; }; }; // Note: the following will be supported in a future release. /* host { any; } { topology { 127.0.0.0/8; }; }; */ // Setting up secondaries is way easier and the rough picture for this // is explained below. // // If you enable a local name server, don't forget to enter 127.0.0.1 // into your /etc/resolv.conf so this server will be queried first. // Also, make sure to enable it in /etc/rc.conf. zone "." { type hint; file "named.root"; }; zone "0.0.127.IN-ADDR.ARPA" { type master; file "localhost.rev"; }; // NB: Do not use the IP addresses below, they are faked, and only // serve demonstration/documentation purposes! // // Example secondary config entries. It can be convenient to become // a secondary at least for the zone where your own domain is in. Ask // your network administrator for the IP address of the responsible // primary. // // Never forget to include the reverse lookup (IN-ADDR.ARPA) zone! // (This is the first bytes of the respective IP address, in reverse // order, with ".IN-ADDR.ARPA" appended.) // // Before starting to setup a primary zone, better make sure you fully // understand how DNS and BIND works, however. There are sometimes // unobvious pitfalls. Setting up a secondary is comparably simpler. // // NB: Don't blindly enable the examples below. :-) Use actual names // and addresses instead. // // NOTE!!! FreeBSD runs bind in a sandbox (see named_flags in rc.conf). // The directory containing the secondary zones must be write accessible // to bind. The following sequence is suggested: // // mkdir /etc/namedb/s // chown bind.bind /etc/namedb/s // chmod 750 /etc/namedb/s zone "rdshosting.nl" { type master; file "rdshosting.nl"; allow-transfer { 77.232.85.129; 62.212.76.50; common-allow-transfer; }; }; zone "66.212.62.in-addr.arpa" { type master; file "66.212.62.in-addr.arpa"; allow-transfer { common-allow-transfer; }; }; acl common-allow-transfer { 62.212.76.50; }; As i mentioned i made some screenshots of some parts: First the dns settings in plesk: http://www.freeimagehosting.net/uploads/2480faed5e.jpg Second the acl settings in plesk: http://www.freeimagehosting.net/uploads/777f5e69b0.jpg Third my settings at leaseweb: http://www.freeimagehosting.net/uploads/de7122b19c.jpg And last the secondary nameserver settings from leaseweb: http://www.freeimagehosting.net/uploads/fd1da38a8f.jpg If someone has anysuggestion at all on this this will be highly appriciated. Thank you for your time! PS. I am dutch so dutch answers are welcome aswell

    Read the article

  • Cisco VPN Client Behind ASA 5505

    - by fdf33
    I'm trying to get connected to another ASA via Cisco VPN Client. I am behind an ASA 5505 myself and I am tryihng to VPN to a 5510. I get the message: Secure VPN Connection terminated locally by the Client. Reason 412: The remote peer is no longer responding. I can connect to the other ASA if I use a normal cheap Linksys. Here's the version of my ASA: Result of the command: "sh ver" Cisco Adaptive Security Appliance Software Version 8.4(1) Any help would be great. Thanks running-config : Saved : Written by enable_15 at 23:12:32.378 UTC Fri Jul 1 2011 ! ASA Version 8.4(1) ! hostname aaaasa domain-name aaa.local enable password xxxxxxxxxxxxxxx encrypted passwd xxxxxxxxxxxxxxxxxxxx encrypted names ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.254 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address xxx.xxx.xxx.xxx 255.255.254.0 ! interface Vlan5 no nameif security-level 50 ip address 172.16.0.254 255.255.255.0 ! interface Vlan500 no nameif security-level 100 ip address 10.10.10.1 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! boot system disk0:/asa841-k8.bin ftp mode passive dns domain-lookup inside dns domain-lookup outside dns server-group DefaultDNS name-server 4.2.2.2 domain-name aaa.local same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network obj_any subnet 0.0.0.0 0.0.0.0 object network A_93.97.168.1 host 93.97.168.1 object network rdp host 192.168.1.2 object network NETWORK_OBJ_192.168.1.0_24 subnet 192.168.1.0 255.255.255.0 access-list 101 extended permit tcp any host 192.168.1.2 eq 3389 access-list 101 extended permit icmp any any echo-reply access-list 101 extended permit icmp any any source-quench access-list 101 extended permit icmp any any time-exceeded access-list 101 extended permit icmp any any unreachable access-list 102 extended permit ip any any pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1492 ip local pool VPNPool 192.168.2.200-192.168.2.210 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-641.bin no asdm history enable arp timeout 14400 ! object network rdp nat (inside,outside) static interface service tcp 3389 3389 ! nat (inside,outside) after-auto source dynamic any interface access-group 101 in interface outside access-group 102 out interface outside ! router ospf 1 network 192.168.1.0 255.255.255.0 area 0 log-adj-changes ! route outside 0.0.0.0 0.0.0.0 93.97.168.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=ciscoasa proxy-ldc-issuer crl configure crypto ca certificate chain ASDM_TrustPoint0 certificate 8877d64d 30820248 308201b1 a0030201 02020488 77d64d30 0d06092a 864886f7 0d010105 05003036 3111300f 06035504 03130863 6973636f 61736131 21301f06 092a8648 86f70d01 09021612 63697363 6f617361 2e6e6a64 2e6c6f63 616c301e 170d3131 30353231 30383533 34325a17 0d323130 35313830 38353334 325a3036 3111300f 06035504 03130863 6973636f 61736131 21301f06 092a8648 86f70d01 09021612 63697363 6f617361 2e6e6a64 2e6c6f63 616c3081 9f300d06 092a8648 86f70d01 01010500 03818d00 30818902 818100ea 1aa95141 480e616c efee6816 a96d6511 313b6776 cd3dd57b cd84b4d2 5e108aee 7c980086 4d92e2eb b6c7bf66 4585af0a ccbf153a db9270be c6f5c67b db9dd8d1 2f78d033 3348b056 df4be0da 70e08953 53adf294 9db6c020 597d250f bf448b43 b90179c8 ff0b15d8 744632d9 31c1945f 0b11e258 b4c1d224 692efff4 7b2f5102 03010001 a3633061 300f0603 551d1301 01ff0405 30030101 ff300e06 03551d0f 0101ff04 04030201 86301f06 03551d23 04183016 8014493c 19db183a ab1af9e9 b1e44ad4 2a408b3c 89d1301d 0603551d 0e041604 14493c19 db183aab 1af9e9b1 e44ad42a 408b3c89 d1300d06 092a8648 86f70d01 01050500 03818100 1dd1760a fdd15941 4803fb9a cd6f44a7 2e275854 a1c0fbe1 d19f2cc9 182d43ef a547f854 8df96d15 3ea79c62 cf3fcb1c 5820360b c607dbfc 4de8bb16 19f727e9 b928a085 665816d8 138e4a35 ed610950 7910dd4a 0b1a9dd9 0e26f1c8 b78bc0cc cbf19eb2 4c4c3931 45199ea5 249e3266 661e44fd 7a00d376 dcfc6e4e d43f10b8 quit crypto isakmp nat-traversal 30 crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 enable outside client-services port 443 crypto ikev2 remote-access trustpoint ASDM_TrustPoint0 telnet timeout 5 ssh 192.168.1.0 255.255.255.0 inside ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.5-192.168.1.36 inside dhcpd dns 4.2.2.2 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics host number-of-rate 3 threat-detection statistics port threat-detection statistics protocol threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server 82.219.4.31 source outside prefer ssl trust-point ASDM_TrustPoint0 outside webvpn enable outside anyconnect image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 anyconnect profiles AnyConnectVPN_client_profile disk0:/AnyConnectVPN_client_profile.xml anyconnect profiles SSLAnyConnectVPN_client_profile disk0:/SSLAnyConnectVPN_client_profile.xml anyconnect enable tunnel-group-list enable group-policy GroupPolicy_AnyConnectVPN internal group-policy GroupPolicy_AnyConnectVPN attributes wins-server none dns-server value 4.2.2.2 vpn-tunnel-protocol ikev2 ssl-client ssl-clientless default-domain value aaa.local webvpn url-list none anyconnect profiles value AnyConnectVPN_client_profile type user group-policy GroupPolicy_SSLAnyConnectVPN internal group-policy GroupPolicy_SSLAnyConnectVPN attributes wins-server none dns-server value 4.2.2.2 vpn-tunnel-protocol ikev2 ssl-client default-domain value aaa.local webvpn anyconnect profiles value SSLAnyConnectVPN_client_profile type user username testuser password xxxxxxxxxxxxxxxxx encrypted privilege 0 username testuser attributes vpn-group-policy GroupPolicy_AnyConnectVPN tunnel-group SSLPOL type remote-access tunnel-group SSLPOL general-attributes default-group-policy GroupPolicy_AnyConnectVPN tunnel-group SSLAnyConnectVPN type remote-access tunnel-group SSLAnyConnectVPN general-attributes address-pool VPNPool default-group-policy GroupPolicy_SSLAnyConnectVPN tunnel-group SSLAnyConnectVPN webvpn-attributes group-alias SSLAnyConnectVPN enable ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect ip-options inspect netbios inspect rsh inspect rtsp inspect sip inspect skinny inspect sqlnet inspect sunrpc inspect tftp inspect xdmcp ! service-policy global_policy global prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:94a65341aa27d3929d5e92a32ba22120 : end

    Read the article

  • Stop duplicate icmp echo replies when bridging to a dummy interface?

    - by mbrownnyc
    I recently configured a bridge br0 with members as eth0 (real if) and dummy0 (dummy.ko if). When I ping this machine, I receive duplicate replies as: # ping SERVERA PING SERVERA.domain.local (192.168.100.115) 56(84) bytes of data. 64 bytes from SERVERA.domain.local (192.168.100.115): icmp_seq=1 ttl=62 time=113 ms 64 bytes from SERVERA.domain.local (192.168.100.115): icmp_seq=1 ttl=62 time=114 ms (DUP!) 64 bytes from SERVERA.domain.local (192.168.100.115): icmp_seq=2 ttl=62 time=113 ms 64 bytes from SERVERA.domain.local (192.168.100.115): icmp_seq=2 ttl=62 time=113 ms (DUP!) Using tcpdump on SERVERA, I was able to see icmp echo replies being sent from eth0 and br0 itself as follows (oddly two echo request packets arrive "from" my Windows box myhost): 23:19:05.324192 IP myhost.domain.local > SERVERA.domain.local: ICMP echo request, id 512, seq 43781, length 40 23:19:05.324212 IP SERVERA.domain.local > myhost.domain.local: ICMP echo reply, id 512, seq 43781, length 40 23:19:05.324217 IP myhost.domain.local > SERVERA.domain.local: ICMP echo request, id 512, seq 43781, length 40 23:19:05.324221 IP SERVERA.domain.local > myhost.domain.local: ICMP echo reply, id 512, seq 43781, length 40 23:19:05.324264 IP SERVERA.domain.local > myhost.domain.local: ICMP echo reply, id 512, seq 43781, length 40 23:19:05.324272 IP SERVERA.domain.local > myhost.domain.local: ICMP echo reply, id 512, seq 43781, length 40 It's worth noting, testing reveals that hosts on the same physical switch do not see DUP icmp echo responses (a host on the same VLAN on another switch does see a dup icmp echo response). I've read that this could be due to the ARP table of a switch, but I can't find any info directly related to bridges, just bonds. I have a feeling my problem lay in the stack on linux, not the switch, but am opened to any suggestions. The system is running centos6/el6 kernel 2.6.32-71.29.1.el6.i686. How do I stop ICMP echo replies from being sent in duplicate when dealing with a bridge interface/bridged interfaces? Thanks, Matt [edit] Quick note: It was recommended in #linux to: [08:53] == mbrownnyc [gateway/web/freenode/] has joined ##linux [08:57] <lkeijser> mbrownnyc: what happens if you set arp_ignore to 1 for the dummy interface? [08:59] <lkeijser> also set arp_announce to 2 for that interface [09:24] <mbrownnyc> lkeijser: I set arp_annouce to 2, arp_ignore to 2 in /etc/sysctl.conf and rebooted the machine... verifying that the bits are set after boot... the problem is still present I did this and came up empty. Same dup problem. I will be moving away from including the dummy interface in the bridge as: [09:31] == mbrownnyc [gateway/web/freenode/] has joined #Netfilter [09:31] <mbrownnyc> Hello all... I'm wondering, is it correct that even with an interface in PROMISC that the kernel will drop /some/ packets before they reach applications? [09:31] <whaffle> What would you make think so? [09:32] <mbrownnyc> I ask because I am receiving ICMP echo replies after configuring a bridge with a dummy interface in order for ipt_netflow to see all packets, only as reported in it's documentation: http://ipt-netflow.git.sourceforge.net/git/gitweb.cgi?p=ipt-netflow/ipt-netflow;a=blob;f=README.promisc [09:32] <mbrownnyc> but I do not know if PROMISC will do the same job [09:33] <mbrownnyc> I was referred here from #linux. any assistance is appreciated [09:33] <whaffle> The following conditions need to be met: PROMISC is enabled (bridges and applications like tcpdump will do this automatically, otherwise they won't function). [09:34] <whaffle> If an interface is part of a bridge, then all packets that enter the bridge should already be visible in the raw table. [09:35] <mbrownnyc> thanks whaffle PROMISC must be set manually for ipt_netflow to function, but [09:36] <whaffle> promisc does not need to be set manually, because the bridge will do it for you. [09:36] <whaffle> When you do not have a bridge, you can easily create one, thereby rendering any kernel patches moot. [09:36] <mbrownnyc> whaffle: I speak without the bridge [09:36] <whaffle> It is perfectly valid to have a "half-bridge" with only a single interface in it. [09:36] <mbrownnyc> whaffle: I am unfamiliar with the raw table, does this mean that PROMISC allows the raw table to be populated with packets the same as if the interface was part of a bridge? [09:37] <whaffle> Promisc mode will cause packets with {a dst MAC address that does not equal the interface's MAC address} to be delivered from the NIC into the kernel nevertheless. [09:37] <mbrownnyc> whaffle: I suppose I mean to clearly ask: what benefit would creating a bridge have over setting an interface PROMISC? [09:38] <mbrownnyc> whaffle: from your last answer I feel that the answer to my question is "none," is this correct? [09:39] <whaffle> Furthermore, the linux kernel itself has a check for {packets with a non-local MAC address}, so that packets that will not enter a bridge will be discarded as well, even in the face of PROMISC. [09:46] <mbrownnyc> whaffle: so, this last bit of information is quite clearly why I would need and want a bridge in my situation [09:46] <mbrownnyc> okay, the ICMP echo reply duplicate issue is likely out of the realm of this channel, but I sincerely appreciate the info on the kernels inner-workings [09:52] <whaffle> mbrownnyc: either the kernel patch, or a bridge with an interface. Since the latter is quicker, yes [09:54] <mbrownnyc> thanks whaffle [edit2] After removing the bridge, and removing the dummy kernel module, I only had a single interface chilling out, lonely. I still received duplicate icmp echo replies... in fact I received a random amount: http://pastebin.com/2LNs0GM8 The same thing doesn't happen on a few other hosts on the same switch, so it has to do with the linux box itself. I'll likely end up rebuilding it next week. Then... you know... this same thing will occur again. [edit3] Guess what? I rebuilt the box, and I'm still receiving duplicate ICMP echo replies. Must be the network infrastructure, although the ARP tables do not contain multiple entries. [edit4] How ridiculous. The machine was a network probe, so I was (ingress and egress) mirroring an uplink port to a node that was the NIC. So, the flow (must have) gone like this: ICMP echo request comes in through the mirrored uplink port. (the real) ICMP echo request is received by the NIC (the mirrored) ICMP echo request is received by the NIC ICMP echo reply is sent for both. I'm ashamed of myself, but now I know. It was suggested on #networking to either isolate the mirrored traffic to an interface that does not have IP enabled, or tag the mirrored packets with dot1q.

    Read the article

  • Robocopy fails in Scheduled task with ERROR 1326 Logon failure

    - by reticentKoala
    My aim: To simply mirror a database backup directory onto another server Approach: Use Robocopy statement contained in a scheduled task robocopy "C:\MylocalDirBackup" "\\MY.IP\DatabaseBackupsShare" /mir /z /log:"C:\MyLocalDIR\RobocopyTestLog.txt" Environment: Windows Server 2008R2 Scheduled task user "MylocalUser": Local adminon local machine Network config: Both servers on workgroup Tests: navigate to share \MY.IP\DatabaseBackupsShare as "MylocalUser" - success, no prompt for credentials Run robocopy command from command line when logged on as "MyLocalUser" - success The Problem!: When running Robocopy command from a scheduled task the following error is raised: 2013/10/22 20:04:57 ERROR 1326 (0x0000052E) Accessing Destination Directory \\MY.IP\DatabaseBackupsShare\ Logon failure: unknown user name or bad password. I found several other people who are having similar problems, and followed suggestions here: http://social.technet.microsoft.com/Forums/scriptcenter/en-US/b591346e-3ed0-4ed1-9453-24851ebe1bb1/scheduling-robocopy-to-run-at-system-startup?forum=ITCG Any help gratefully received. I thought this was going to be a quick task...

    Read the article

  • DD-WRT RIP2 Router mode configuration

    - by Eduardo
    Can anybody tell me why my wireless router only redirects traffic to ADSL modem when it is on Gateway mode? These are the configurations when it is on RIP2 Router mode: ADSL Modem: ------------ LAN IP: 10.1.1.1 Subnet mask: 255.0.0.0 RIP v2 enabled in both directions Route: destination: 192.168.1.0 Subnet mask: 255.255.255.0 Gateway: 10.1.1.2 Wireless Router (DD-WRT) ------------------------ WAN IP: 10.1.1.2 WAN Subnet mask: 255.0.0.0 LAN IP: 192.168.1.1 LAN Subnet mask: 255.255.255.0 Operating mode: RIP2 Router Static Route: Destination LAN NET: 10.0.0.0 Subnet Mask: 255.0.0.0 Gateway: 10.1.1.1 Interface: LAN & WLAN

    Read the article

  • iftop - how to generate text file with its output?

    - by mickula
    iftop is great tool to view almost live bandwidth usage distinguished by source-ip source-port destination-ip destination port. I'm using it to see which client's ip is using most bandwidth. Now I would like to store output somewhere. iftop uses ncurses so iftop > log.txt does not work as expected, result file is not readable. Is there any tool like this which can be used to pipe output to a text file? Thanks for your replies.

    Read the article

  • Could not find DHCP daemon to get information on Belkin G Wifi Router

    - by Anirudh Goel
    I am using a Belkin G Wireless Router F5D7234, and i have a DSL connection with only a ethernet cable. So i connected the cable to the Modem port and allowed it to use Dyanmic IP, it worked successfully and an ip was assigned to it and multiple computers could connect to it and browse. But after some time the power went off and after then upon rebooting it is taking about half hour to get an IP address. Upon seeing the log i see this entry repeatedly 07/02/2010 23:22:34 DHCP Client: [WAN]Could not find DHCP daemon to get information 07/02/2010 23:22:32 DHCP Client: [WAN]Send Discover 07/02/2010 23:22:30 DHCP Client: [WAN]Send Discover 07/02/2010 23:22:28 DHCP Client: [WAN]Send Discover 07/02/2010 23:22:26 DHCP Client: [WAN]Send Discover 07/02/2010 23:22:26 DHCP Client: [WAN]Could not find DHCP daemon to get information 07/02/2010 23:22:24 DHCP Client: [WAN]Send Discover 07/02/2010 23:22:22 DHCP Client: [WAN]Send Discover 07/02/2010 23:22:20 DHCP Client: [WAN]Send Discover 07/02/2010 23:22:18 DHCP Client: [WAN]Send Discover Any idea what i can do? I tried using another belkin router of same model and make and there also i faced the same problem.

    Read the article

  • Tunnel into Sonicwall VPN while on Sonicwall wifi?

    - by Patrick Harrington
    Hey all, I am able to hit my company's VPN while I am at home using a dedicated IP with no issue. When I am at work, the VPN we use (a Sonicwall router/VPN/wifi access point), I can get outside internet fine, but am unable to connect to the VPN. I know that the wifi puts me on a different subnet, and when I try to connect to the normal VPN IP it won't work, and a traceroute just times out. Any suggestions? Might there be an internal IP I need to hit while here at work?

    Read the article

  • MMC and Server Manager Authentication Errors - Access Denied

    - by Vazgen
    I'm trying to connect remotely from my Windows 8 client to manage my Hyper-V Server 2012. I have done everything I can find to configure remote management of the server including: Added a net user on server Enabled anonymous dcom access on server and client Added firewall rules for "Windows Firewall Remote Management" and "Windows Management Instrumentation (WMI)" on server Added firewall exception on server for client IP Added cmdkey on client Added server to TrustedHost list on client Added LocalAccountTokenFilter policy registry entry on server Added client IP to server's host file Added server IP to client's host file I cannot believe I am still getting these errors. What's even more strange is that I can connect in Hyper-V Manager and create VM's but not in MMC and Server Manager. I also get Access Denied trying to Open the Authorization Store on my server from my client using Authorization Manager. I'm providing all the errors because I have a feeling they root from the same problem. Does anybody see anything I missed?

    Read the article

  • Blocking yandex.ru bot

    - by Ross
    I want to block all request from yandex.ru search bot. It is very traffic intensive (2GB/day). I first blocked one C class IP range, but it seems this bot appear from different IP ranges. For example: spider31.yandex.ru - 77.88.26.27 spider79.yandex.ru - 95.108.155.251 etc.. I can put some deny in robots.txt but not sure if it respect this. I am thinking of blocking a list of IP ranges. Can somebody suggest some general solution.

    Read the article

  • What does it mean when ARP shows <incomplete> on eth1

    - by Geoff Dalgas
    We have been using HAProxy along with heartbeat from the Linux-HA project. We are using two linux instances to provide a failover. Each server has with their own public IP and a single IP which is shared between the two using a virtual interface (eth1:1) at IP: 69.59.196.211 The virtual interface (eth1:1) IP 69.59.196.211 is configured as the gateway for the windows servers behind them and we use ip_forwarding to route traffic. We are experiencing an occasional network outage on one of our windows servers behind our linux gateways. HAProxy will detect the server is offline which we can verify by remoting to the failed server and attempting to ping the gateway: Pinging 69.59.196.211 with 32 bytes of data: Reply from 69.59.196.220: Destination host unreachable. Running arp -a on this failed server shows that there is no entry for the gateway address (69.59.196.211): Interface: 69.59.196.220 --- 0xa Internet Address Physical Address Type 69.59.196.161 00-26-88-63-c7-80 dynamic 69.59.196.210 00-15-5d-0a-3e-0e dynamic 69.59.196.212 00-21-5e-4d-45-c9 dynamic 69.59.196.213 00-15-5d-00-b2-0d dynamic 69.59.196.215 00-21-5e-4d-61-1a dynamic 69.59.196.217 00-21-5e-4d-2c-e8 dynamic 69.59.196.219 00-21-5e-4d-38-e5 dynamic 69.59.196.221 00-15-5d-00-b2-0d dynamic 69.59.196.222 00-15-5d-0a-3e-09 dynamic 69.59.196.223 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 225.0.0.1 01-00-5e-00-00-01 static On our linux gateway instances arp -a shows: peak-colo-196-220.peak.org (69.59.196.220) at <incomplete> on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-222.peak.org (69.59.196.222) at 00:15:5d:0a:3e:09 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 Why would arp occasionally set the entry for this failed server as <incomplete>? Should we be defining our arp entries statically? I've always left arp alone since it works 99% of the time, but in this one instance it appears to be failing. Are there any additional troubleshooting steps we can take help resolve this issue? THINGS WE HAVE TRIED I added a static arp entry for testing on one of the linux gateways which still didn't help. root@haproxy2:~# arp -a peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-221.peak.org (69.59.196.221) at 00:15:5d:00:b2:0d [ether] on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 peak-colo-196-220.peak.org (69.59.196.220) at 00:21:5e:4d:30:8d [ether] PERM on eth1 root@haproxy2:~# arp -i eth1 -s 69.59.196.220 00:21:5e:4d:30:8d root@haproxy2:~# ping 69.59.196.220 PING 69.59.196.220 (69.59.196.220) 56(84) bytes of data. --- 69.59.196.220 ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 6006ms Rebooting the windows web server solves this issue temporarily with no other changes to the network but our experience shows this issue will come back. Swapping network cards and switches I noticed the link light on the port of the switch for the failed windows server was running at 100Mb instead of 1Gb on the failed interface. I moved the cable to several other open ports and the link indicated 100Mb for each port that I tried. I also swapped the cable with the same result. I tried changing the properties of the network card in windows and the server locked up and required a hard reset after clicking apply. This windows server has two physical network interfaces so I have swapped the cables and network settings on the two interfaces to see if the problem follows the interface. If the public interface goes down again we will know that it is not an issue with the network card. (We also tried another switch we have on hand, no change) Changing network hardware driver versions We've had the same problem with the latest Broadcom driver, as well as the built-in driver that ships in Windows Server 2008 R2. Replacing network cables As a last ditch effort we remembered another change that occurred was the replacement of all of the patch cords between our servers / switch. We had purchased two sets, one green of lengths 1ft - 3ft for the private interfaces and another set of red cables for the public interfaces. We swapped out all of the public interface patch cables with a different brand and ran our servers without issue for a full week ... aaaaaand then the problem recurred. Disable checksum offload, remove TProxy We also tried disabling TCP/IP checksum offload in the driver, no change. We're now pulling out TProxy and moving to a more traditional x-forwarded-for network arrangement without any fancy IP address rewriting. We'll see if that helps.

    Read the article

  • Emails forwarded via postfix get flagged as spam and forged in Gmail

    - by Kendall Hopkins
    I'm trying to setup a forwarding only email server. I'm running into the problem where all messages forwarded via postfix are getting put into gmail's spam folder and getting flagged as forged. I'm testing a very similar setup on a cpanel box and their forwarded emails make it through without any problem. Things I've done: Setup reverse dns on forwarding box Setup SPF record for forwarding box domain CPanel route (not flagged as spam): [email protected] - [email protected] - [email protected] AWS postfix route (flagged as spam): [email protected] - [email protected] - [email protected] Gmail error message: /etc/postfix/main.cf myhostname = sputnik.*domain*.com smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no append_dot_mydomain = no readme_directory = no myorigin = /etc/mailname mydestination = sputnik.*domain*.com, localhost.*domain*.com, , localhost relayhost = mynetworks = 127.0.0.0/8 10.0.0.0/24 [::1]/128 [fe80::%eth0]/64 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all virtual_alias_maps = hash:/etc/postfix/virtual Email forwarded by CPanel (doesn't get marked as spam): Delivered-To: *personaluser*@gmail.com Received: by 10.182.144.98 with SMTP id sl2csp14396obb; Wed, 9 May 2012 09:18:36 -0700 (PDT) Received: by 10.182.52.38 with SMTP id q6mr1137571obo.8.1336580316700; Wed, 09 May 2012 09:18:36 -0700 (PDT) Return-Path: <mail@*personaldomain*.com> Received: from web6.*domain*.com (173.193.55.66-static.reverse.softlayer.com. [173.193.55.66]) by mx.google.com with ESMTPS id ec7si1845451obc.67.2012.05.09.09.18.36 (version=TLSv1/SSLv3 cipher=OTHER); Wed, 09 May 2012 09:18:36 -0700 (PDT) Received-SPF: neutral (google.com: 173.193.55.66 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) client-ip=173.193.55.66; Authentication-Results: mx.google.com; spf=neutral (google.com: 173.193.55.66 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) smtp.mail=mail@*personaldomain*.com Received: from mail-vb0-f43.google.com ([209.85.212.43]:56152) by web6.*domain*.com with esmtps (TLSv1:RC4-SHA:128) (Exim 4.77) (envelope-from <mail@*personaldomain*.com>) id 1SS9b2-0007J9-LK for mail@kendall.*domain*.com; Wed, 09 May 2012 12:18:36 -0400 Received: by vbbfq11 with SMTP id fq11so599132vbb.2 for <mail@kendall.*domain*.com>; Wed, 09 May 2012 09:18:35 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=mime-version:x-originating-ip:date:message-id:subject:from:to :content-type:x-gm-message-state; bh=Hr0AH40uUtx/w/u9hltbrhHJhRaD5ubKmz2gGg44VLs=; b=IBKi6Xalr9XVFYwdkWxn9PLRB69qqJ9AjUPdvGh8VxMNW4S+hF6r4GJcGOvkDn2drO kw5r4iOpGuWUQPEMHRPyO4+Ozc9SE9s4Px2oVpadR6v3hO+utvFGoj7UuchsXzHqPVZ8 A9FS4cKiE0E0zurTjR7pfQtZT64goeEJoI/CtvcoTXj/Mdrj36gZ2FYtO8Qj4dFXpfu9 uGAKa4jYfx9zwdvhLzQ3mouWwQtzssKUD+IvyuRppLwI2WFb9mWxHg9n8y9u5IaduLn7 7TvLIyiBtS3DgqSKQy18POVYgnUFilcDorJs30hxFxJhzfTFW1Gdhrwjvz0MTYDSRiGQ P4aw== MIME-Version: 1.0 Received: by 10.52.173.209 with SMTP id bm17mr326586vdc.54.1336580315681; Wed, 09 May 2012 09:18:35 -0700 (PDT) Received: by 10.220.191.134 with HTTP; Wed, 9 May 2012 09:18:35 -0700 (PDT) X-Originating-IP: [99.50.225.7] Date: Wed, 9 May 2012 12:18:35 -0400 Message-ID: <CA+tP6Viyn0ms5RJoqtd20ms3pmQCgyU0yy7GBiaALEACcDBC2g@mail.gmail.com> Subject: test5 From: Kendall Hopkins <mail@*personaldomain*.com> To: mail@kendall.*domain*.com Content-Type: multipart/alternative; boundary=bcaec51b9bf5ee11c004bf9cda9c X-Gm-Message-State: ALoCoQm3t1Hohu7fEr5zxQZsC8FQocg662Jv5MXlPXBnPnx2AiQrbLsNQNknLy39Su45xBMCM47K X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - web6.*domain*.com X-AntiAbuse: Original Domain - kendall.*domain*.com X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - *personaldomain*.com X-Source: X-Source-Args: X-Source-Dir: --bcaec51b9bf5ee11c004bf9cda9c Content-Type: text/plain; charset=ISO-8859-1 test5 --bcaec51b9bf5ee11c004bf9cda9c Content-Type: text/html; charset=ISO-8859-1 test5 --bcaec51b9bf5ee11c004bf9cda9c-- Email forwarded via AWS postfix box (marked as spam): Delivered-To: *personaluser*@gmail.com Received: by 10.182.144.98 with SMTP id sl2csp14350obb; Wed, 9 May 2012 09:17:46 -0700 (PDT) Received: by 10.229.137.143 with SMTP id w15mr389471qct.37.1336580266237; Wed, 09 May 2012 09:17:46 -0700 (PDT) Return-Path: <mail@*personaldomain*.com> Received: from sputnik.*domain*.com (sputnik.*domain*.com. [107.21.39.201]) by mx.google.com with ESMTP id o8si1330855qct.115.2012.05.09.09.17.46; Wed, 09 May 2012 09:17:46 -0700 (PDT) Received-SPF: neutral (google.com: 107.21.39.201 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) client-ip=107.21.39.201; Authentication-Results: mx.google.com; spf=neutral (google.com: 107.21.39.201 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) smtp.mail=mail@*personaldomain*.com Received: from mail-vb0-f52.google.com (mail-vb0-f52.google.com [209.85.212.52]) by sputnik.*domain*.com (Postfix) with ESMTP id A308122AD6 for <mail@*personaldomain2*.com>; Wed, 9 May 2012 16:17:45 +0000 (UTC) Received: by vbzb23 with SMTP id b23so448664vbz.25 for <mail@*personaldomain2*.com>; Wed, 09 May 2012 09:17:45 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=mime-version:x-originating-ip:date:message-id:subject:from:to :content-type:x-gm-message-state; bh=XAzjH9tUXn6SbadVSLwJs2JVbyY4arosdTuV8Nv+ARI=; b=U8gIgHd6mhWYqPU4MH/eyvo3kyZsDn/GiYwZj5CLbs6Zz/ZOXQkenRi7zW3ewVFi/9 uAFylT8SQ+Wjw2l6OgAioCTojfZ58s4H/JW+1bu460KAP9aeOTcZDNSsHlsj0wvH5XRV 4DQJa11kz+WFVtVVcFuB33WVUPAgJfXzY+pSTe+FWsrZyrrwL7/Vm9TSKI5PBwRN9i4g zAZabgkmw1o2THT3kbJi6vAbPzlqK2LVbgt82PP0emHdto7jl4iD5F6lVix4U0dsrtRv xuGUE0gDyIwJuR4Q5YTkNubwGH/Y2bFBtpx2q1IORANrolWxIGaZSceUWawABkBGPABX 1/eg== MIME-Version: 1.0 Received: by 10.52.96.169 with SMTP id dt9mr282954vdb.107.1336580265812; Wed, 09 May 2012 09:17:45 -0700 (PDT) Received: by 10.220.191.134 with HTTP; Wed, 9 May 2012 09:17:45 -0700 (PDT) X-Originating-IP: [99.50.225.7] Date: Wed, 9 May 2012 12:17:45 -0400 Message-ID: <CA+tP6VgqZrdxP543Y28d1eMwJAs4DxkS4EE6bvRL8nFoMkgnQQ@mail.gmail.com> Subject: test4 From: Kendall Hopkins <mail@*personaldomain*.com> To: mail@*personaldomain2*.com Content-Type: multipart/alternative; boundary=20cf307f37f6f521b304bf9cd79d X-Gm-Message-State: ALoCoQkrNcfSTWz9t6Ir87KEYyM+zJM4y1AbwP86NMXlk8B3ALhnis+olFCKdgPnwH/sIdzF3+Nh --20cf307f37f6f521b304bf9cd79d Content-Type: text/plain; charset=ISO-8859-1 test4 --20cf307f37f6f521b304bf9cd79d Content-Type: text/html; charset=ISO-8859-1 test4 --20cf307f37f6f521b304bf9cd79d--

    Read the article

  • vlan change via scvmm not working

    - by HarryMud
    Hi i have a windows 2008 R2 hyper-v server which is managed via scvmm 2008 R2. the guest os running on the hyper-v server is winxp with sp3. if i change the vlan id via scvmm the guest doesn't get an ip via dhcp i looked in the properties of the vm with the hyper-v mmc an see the vlan changed correctly but no ip connectivity either static or dhcp a reboot of the guest os didn't help if i change the vlan id via hyper-v mmc the guest gets an ip via dhcp scvmm seams to forget something after the vlan change has anyone a clue how to resolve this ? thx

    Read the article

  • Getting error "No address associated with hostname: mod_unique_id: unable to find IPv4 address of "z

    - by Eedoh
    Hello. I'm trying to set up video surveillance system using ip cameras and zonealarm on Arch Linux. I set up fixed ip address, I've managed to get streams from cameras, etc. However, after restart of the machine, I can not start apache again. I checked configuration of rc.conf, and saw that static ip configuration has been deleted, and also secondary nameserver in resolv.conf. Tried to re-write these with correct parameters, but now with no effect. This is tail of my /var/log/httpd/error_log file, after /etc/rc.d/httpd restart attempt [Fri Jan 29 04:20:45 2010] [alert] (EAI 5)No address associated with hostname: mod_unique_id: unable to find IPv4 address of "zmhost" Configuration failed Anybody has an idea how could I fix this??

    Read the article

  • Bridging with aliased Ethernet card for Virtualizing with single Ethernet card

    - by user113505
    We are having a server with good CPU and RAM,so we are planning to do XEN virtualization on ubuntu 12.04 server to handle high traffic. The plan is to keep the host machine only to manage VMs(no NAT ing). A New public IP will be assigned to that VM,For that i think we need a Bridge to external network(Since my Machine has only single ethernet card aliased with 4 different Pub IP's) Is it possible to create a bridge using aliased IP single ethernet card aliased to 4 pub IPs Do we need an additional Ethernet card to do Bridging.Only have ssh access to the machine. Any suggestions will be appreciated.

    Read the article

  • Can't access network share with name defined in hosts file

    - by Einar Egilsson
    I have a network share on a machine that I can only reach by IP address. I then defined an alias for the IP in my hosts file so I could use that instead of the IP but then I can't log on to the share, I just get the logon prompt again and again. So basically this: \\172.17.0.48\SomeShare works but this \\myalias\SomeShare doesn't. myalias is defined in c:\windows\system32\drivers\etc\hosts as 172.17.0.48 myalias And I can use the alias for remote desktop without problems. Can anyone tell me why this doesn't work for fileshares?

    Read the article

  • Redirect as a backup trick? w/o modifying DNS?

    - by acidzombie24
    I specifically looked up how to do something like this ( Can you set a backup ip for your server in DNS? ) and the answer basically was you can't. If i say specify 2 ip addresses could i somehow use a HTTP response header to ignore it temporary (say 5mins) and go to the other IP address? Or maybe i can play dead however i'm unsure how to play dead using nginx. I then would like to be available after my box notice the other box is down and be some kind of readonly server. I'm sure something like this has been implemented i am just wondering how i might implement it with 2 boxes. I'm sure it isn't very difficult? How might i redirect traffic from a backup box to my main server without modifying the DNS?

    Read the article

  • Variable parsing with Bash and wget

    - by Bill Westrup
    I'm attempting to use wget in a simple bash script to grab a jpeg image from an Axis camera. This script outputs a file named JPEGOUT, instead of the desired output, which should be a timestamp jpeg (ex: 201209292040.jpg) . Changing the variable in the wget statement from JPEGOUT to $JPEGOUT makes wget fail with "wget: missing URL" error. The weird thing is wget parses the $IP vairable correctly. No luck on the output file name. I've tried single quotes, double quotes, parenthesis: all to no luck. Here's the script !/bin/bash IP=$1 JPEGOUT= date +%Y%m%d%H%M.jpg wget -O JPEGOUT http://$IP/axis-cgi/jpg/image.cgi?resolution=640x480&compression=25 Any ideas on how to get the output file name to parse correctly?

    Read the article

  • DRBD Not syncing between my nodes

    - by Mike Curry
    Some version info: Operating system is Ubuntu 11.10, on EC2, kernel is 3.0.0-16-virtual and the application info is: Version: 8.3.11 (api:88) GIT-hash: 0de839cee13a4160eed6037c4bddd066645e23c5 build by buildd@allspice, 2011-07-05 19:51:07 Getting some strange errors in dmesg (seen below) as well, there is no replication happening. I have made my first node primary and its showing: drbd driver loaded OK; device status: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 m:res cs ro ds p mounted fstype 0:r0 StandAlone Primary/Unknown UpToDate/DUnknown r----s ext3 my secondary node is showing: drbd driver loaded OK; device status: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 m:res cs ro ds p mounted fstype 0:r0 StandAlone Secondary/Unknown Inconsistent/DUnknown r----s Showing /proc/drbd on the master shows: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 0: cs:StandAlone ro:Primary/Unknown ds:UpToDate/DUnknown r----s ns:0 nr:0 dw:4 dr:1073 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:262135964 Showing /proc/drbd on the slave shows that there is nothing being transfered... version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 0: cs:StandAlone ro:Secondary/Unknown ds:Inconsistent/DUnknown r----s ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:262135964 Here is my config... resource r0 { protocol C; startup { wfc-timeout 15; degr-wfc-timeout 60; } net { cram-hmac-alg sha1; shared-secret "test123; } on drbd01 { device /dev/drbd0; disk /dev/xvdm; address 23.XX.XX.XX:7788; # blocked out ip meta-disk internal; } on drbd02 { device /dev/drbd0; disk /dev/xvdm; address 184.XX.XX.XX:7788; #blocked out ip meta-disk internal; } } I have run the following on the master: sudo drbdadm -- --overwrite-data-of-peer primary all There is no firewall between the systems. Here is the dmesg with some errors: [2285172.969955] drbd: initialized. Version: 8.3.11 (api:88/proto:86-96) [2285172.969960] drbd: srcversion: DA5A13F16DE6553FC7CE9B2 [2285172.969962] drbd: registered as block device major 147 [2285172.969965] drbd: minor_table @ 0xffff88000276ea00 [2285173.000952] block drbd0: Starting worker thread (from drbdsetup [1300]) [2285173.003971] block drbd0: disk( Diskless -> Attaching ) [2285173.006150] block drbd0: No usable activity log found. [2285173.006154] block drbd0: Method to ensure write ordering: flush [2285173.006158] block drbd0: max BIO size = 4096 [2285173.006165] block drbd0: drbd_bm_resize called with capacity == 524271928 [2285173.008512] block drbd0: resync bitmap: bits=65533991 words=1023969 pages=2000 [2285173.008518] block drbd0: size = 250 GB (262135964 KB) [2285173.079566] block drbd0: bitmap READ of 2000 pages took 17 jiffies [2285173.081189] block drbd0: recounting of set bits took additional 1 jiffies [2285173.081194] block drbd0: 250 GB (65533991 bits) marked out-of-sync by on disk bit-map. [2285173.081203] block drbd0: Suspended AL updates [2285173.081210] block drbd0: disk( Attaching -> UpToDate ) [2285173.081214] block drbd0: attached to UUIDs 1C1291D39584C1D1:0000000000000004:0000000000000000:0000000000000000 [2285173.095016] block drbd0: conn( StandAlone -> Unconnected ) [2285173.095046] block drbd0: Starting receiver thread (from drbd0_worker [1301]) [2285173.099297] block drbd0: receiver (re)started [2285173.099304] block drbd0: conn( Unconnected -> WFConnection ) [2285173.099330] block drbd0: bind before connect failed, err = -99 [2285173.099346] block drbd0: conn( WFConnection -> Disconnecting ) [2285173.295788] block drbd0: Discarding network configuration. [2285173.295815] block drbd0: Connection closed [2285173.295826] block drbd0: conn( Disconnecting -> StandAlone ) [2285173.295840] block drbd0: receiver terminated [2285173.295844] block drbd0: Terminating drbd0_receiver Edit: Reading some other similar issues, it was suggested to do a 'drbdadm dump all', so I figured it couldn't hurt. ubuntu@drbd01:~$ drbdadm dump all /etc/drbd.conf:19: in resource r0, on drbd01: IP 23.XX.XX.XX not found on this host. and on slave: root@drbd02:~# drbdadm dump all /etc/drbd.conf:25: in resource r0, on drbd02: IP 184.XX.XX.XX not found on this host. Strange it doesn't find its own ip, however, this is an Amazon EC2 system using an elastic IP... here are my ipconfigs for both... master: ubuntu@drbd01:~$ ifconfig eth0 Link encap:Ethernet HWaddr 22:00:0a:1c:27:11 inet addr:10.28.39.17 Bcast:10.28.39.63 Mask:255.255.255.192 inet6 addr: fe80::2000:aff:fe1c:2711/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1569 errors:0 dropped:0 overruns:0 frame:0 TX packets:1169 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:124409 (124.4 KB) TX bytes:213601 (213.6 KB) Interrupt:26 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) slave: root@drbd02:~# ifconfig eth0 Link encap:Ethernet HWaddr 12:31:3f:00:14:9d inet addr:10.160.27.107 Bcast:10.160.27.255 Mask:255.255.254.0 inet6 addr: fe80::1031:3fff:fe00:149d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:774 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:75381 (75.3 KB) TX bytes:109673 (109.6 KB) Interrupt:26 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

    Read the article

  • IPFW not locking people out

    - by Cole
    I've had some brute-forcing of my ssh connection recently, so I got fail2ban to hopefully prevent that. I set it up, and started testing it out by giving wrong passwords on my computer. (I have physical access to the server if I need to unblock myself) However, it never stops me from entering passwords. I see in /var/log/fail2ban.log that fail2ban kicked in and banned me, and there's a ipfw entry for my IP, but I'm not locked out. I've changed the configuration around, and then tried just using the ipfw command myself, but nothing seems to lock me out. I've tried the following blocks: 65300 deny tcp from 10.0.1.30 to any in 65400 deny ip from 10.0.1.30 to any 65500 deny tcp from 10.0.1.30 to any My firewall setup has a "allow ip from any to any" rule after these though, maybe that's the problem? I'm using Mac OS 10.6 (stock ipfw, it doesn't seem to have a --version flag) Thanks in advance.

    Read the article

  • Cisco Catalyst 65XX and traffic shaping

    - by Nadz Goldman
    Hello! I have Cisco Catalyst 65XX, many VLANs and about ~1300 users. Users connected to some D-Link switches with second-level management. D-Link switches come to my Cisco Catalyst 65XX by VLANs. So, how I can shape traffic per user? If I use something like this: access-list 145 permit ip any host 192.168.0.1 access-list 145 permit ip any host 192.168.0.2 access-list 145 permit ip any host 192.168.0.3 ... int Gi0/1 traffic-shape group 145 128000 7936 7936 1000 will I have shape traffic per user or it will shape traffic only on interface? I mean - every user will have 128kb/s (per user) or everybody will have 128kb/s ? If it will be for everybody, then what is the solution of my question: how every user can have 128kb/s ?

    Read the article

< Previous Page | 133 134 135 136 137 138 139 140 141 142 143 144  | Next Page >