Search Results

Search found 15926 results on 638 pages for 'business card'.

Page 138/638 | < Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >

  • Linux PCIE Physical Bus Address

    - by Without me Its just Aweso
    I am working on designing a custom PCIexpress card. I am trying to write a kernel module that will DMA my custom card. Right now when i plug the card into linux no valid PCI device shows up (meaning I probably have a error on my end, i know) however, If I halt the system at startup in the bootloader (uboot) I am able to directly access the card as I know in uboot the physical memory address that is mapped to my device. Is there a way I can access the card in a simliar fashion in linux? Thanks, Stephanie

    Read the article

  • No sound from internal speaker but headphones OK

    - by Aris Boch
    The problem: The system won't play sound on the internal speaker of the laptop, but only on the headphone. When I put the headphone jack half in and fiddle around with it, then it'll play even on the internal speakers (the system apparently believes, that the headphone are in). What should I do? The technical data: Laptop modell Medion Erazer X6815 matatabisama@matatabisama-X6815:~/Downloads$ sudo aplay -l | egrep ^card card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog] card 0: PCH [HDA Intel PCH], device 1: ALC269VB Digital [ALC269VB Digital] card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Ubuntu 12.04 64 matatabisama@matatabisama-X6815:~/Downloads$ uname -a Linux matatabisama-X6815 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:52:48 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

    Read the article

  • WebCenter Customer Spotlight: Global Village Telecom Ltda

    - by me
    Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter  Solution SummaryGlobal Village Telecom Ltda. (GVT)  is a leading Brazilian telecommunications company, developing solutions and providing services for corporate and end users. GVT is located in Curitiba, Brazil, employs 6,000 people and has an annual revenue of around US$1 billion.  GVT business objectives were to improve corporate communications, accelerate internal information flow, provide continuous access to the all business files and  enable the company’s leadership to provide information to all departments in real time. GVT implemented Oracle WebCenter Content to centralize the company's content and they built  a portal to share and find content in real-time. Oracle WebCenter Content enabled GVT to quickly and efficiently integrate communication among all company employees—ensuring that GVT maintain a competitive edge in the market. Human Resources reduced the time required for issuing internal statements to all staff from three weeks to one day. Company OverviewGlobal Village Telecom Ltda. (GVT)  is a leading telecommunications company, developing solutions and providing services for corporate and end users. The company offers diverse innovative products and advanced solutions in conventional fixed telephone communications, data transmission, high speed broadband internet services, and voice over IP (VoIP) services for all market segment. GVT is located in Curitiba, Brazil, employs 6,000 people and have an  annual revenue of around US$1 billion.   Business ChallengesGVT business objectives were to improve corporate communications, accelerate internal information flow, provide continuous access to the all business files and enable the company’s leadership to provide information to all departments in real time. Solution DeployedGVT worked with the Oracle Partner IT7 to deploy Oracle WebCenter Content to securely centralize the company's content such as growth indicators, spreadsheets, and corporate and descriptive project schedules. The solution enabled real-time information sharing through the development of Click GVT, a portal that currently receives 100,000 monthly impressions from employee searches. Business ResultsGVT gained a competitive edge in the communications market by accelerating internal information flow, streamlining the content standardizing information and enabled real-time information sharing and discovery. Human Resources  reduced the time required for issuing  internal statements to all staff from three weeks to one day. “The competitive nature of telecommunication industry demands rapid information in the internal flow of the company. Oracle WebCenter Content enabled us to quickly and efficiently integrate communication among all company employees—ensuring that we maintain a competitive edge in the market.” Marcel Mendes Filho, Systems Manager, Global Village Telecom Ltda. Additional Information Global Viallage Telecom Ltda Customer Snapshot Oracle WebCenter Content

    Read the article

  • 12.04 LTS boot hangs at "SP5100 TCO timer: mmio address 0xfec000f0 already in use", didn't yesterday

    - by DarkIron112
    Dual-booting Windows 7 and Ubuntu 12.04 LTS. I went to reboot from Win to Ubu, and found a few interesting things. My POST screen is covered in blocks of epileptic colors until I hit GRUB, which continues when I try to boot into Ubuntu. These color blocks don't appear when I use my on-board VGA, so I'll just attribute to that. Grub dimensions are swapped (card vs onboard, probably), but, when interfacing with onboard VGA, the Grub Timeout Counter works and when using my card, it does not (see "[!!!]" below for more information) Booting into Ubuntu directly causes the error: SP5100 TCO timer: mmio address 0xfec000f0 already in use Booting into recovery mode, meanwhile, and then "resuming normal boot" gets me to the desktop without native 1440x900 resolution and graphic drivers can't tell the monitor it's looking at (I assume this is because it's not a full graphic boot, and as it says, some drivers won't run?) [!!!] When I reboot after going into recovery mode, the countdown timer works ONCE, puts me back into default ubuntu boot, and then does not work again until after another recovery-mode boot. Windows 7 can boot perfectly with no issues whatsoever from epilepsy color blocks or driver detection. This makes me wonder /why/ the POST screen can't handle my video card anymore. Amidst all the diagnostics, I opened my case and re-seated the videocard securely, ensuring it wasn't a loose connection-- But this did nothing to help me. Hardware I am running an NVidia GeForce GTX 8800 video card in a PCI slot. I have 4.8GiB memory, an AMD Athlon II Quad-core 640 Processor, on an MSI K9N6GM Series Mobo. Onboard video is an NVidia GeForce MCP61(V/S/P) card. Note: I did not have any of these problems yesterday, and I have been using Ubuntu intensively for a week, though it's been working flawlessly for months. I've recently been using it to mod my Android phone, perhaps I messed something up in the file system?

    Read the article

  • ralink rt2860 not working anymore in ubuntu 12.10

    - by greenit
    I just upgraded from Ubuntu 12.04 to 12.10, however, my network card is not working anymore... When i had 12.04 installed, i just had to download the driver from Ralink, go to the directory and enter these commands: $ make $ sudo make install and the network card worked... now, when I want to do this in ubuntu 12.10, it seems like it works, but it doesn't. I can enable the module, it recognizes the network card, but i am unable to connect to any wireless network... How can i get my wireless card working again? If any1 knows a solution, please tell it to me, thx in advance

    Read the article

  • how to enable opengl 2.0 and webgl on gma 3150 ?

    - by mahmoudelbadry
    hi, i have a dell mini 1012 which has an intel n450 processor and gma 3150 integrated graphics card running ubuntu 10.10 according to the intel website the graphics card support opengl 2.0 http://software.intel.com/en-us/articles/quick-reference-guide-to-intel-integrated-graphics/#9 but when i type glxinfo in terminal the opengl version string gives me the following OpenGL version string: 1.4 Mesa 7.9-devel i installed the latest drivers but it didn't work. so, how can i enable opengl 2.0 on this card?? thanks

    Read the article

  • Cheap sound on speakers - Dell XPS L502X

    - by Rafael
    I have a new machine that comes with JBL 2.1 Speakers with Waves Maxx Audio 3. On Windows it sounds perfect, though in Ubuntu 12.04 I get cheap/sound with simple mp3 files. I have tried a few things on different blogs but no luck so far. Any ideas? aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC665 Analog [ALC665 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 1: ALC665 Digital [ALC665 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: N700 [Logitech Speaker Lapdesk N700], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0

    Read the article

  • Can I get the Waves Maxx speaker effects to work in Ubuntu?

    - by Rafael
    I have a new machine that comes with JBL 2.1 Speakers with Waves Maxx Audio 3. On Windows it sounds perfect, though in Ubuntu 12.04 I get cheap/sound with simple mp3 files. I have tried a few things on different blogs but no luck so far. Any ideas? aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC665 Analog [ALC665 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 1: ALC665 Digital [ALC665 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: N700 [Logitech Speaker Lapdesk N700], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0

    Read the article

  • Ubuntu cant load sound cart

    - by Reza Marefaty
    I have installed Ubuntu 12 and i cant see any volume controller on it and so no audio player can detect any sound card and nothing shown in system setting - sound - output tab. but i can see my hard ware by typing this command : aplay -l Return : List of PLAYBACK Hardware Devices ** card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: U0x4d90x20 [USB Device 0x4d9:0x20], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 How can i activate sound ? Edit : This info may helep for the solution : sudo lspci | grep Audio 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) 04:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cedar HDMI Audio [Radeon HD 5400/6300 Series]

    Read the article

  • sound stopped working after upgrade to 11.10 on Tuesday 20th March

    - by Hugh Barney
    My sound card stopped working after a set of updates were installed 2 days ago. The sound card is detected, the volume is not muted and the speakers work, I can make the speakers hum if I touch the jack plug lead that normally plugs into the card. hugh@lindisfarne:~$ lspci -v | grep -A7 -i "audio" 07:01.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster Subsystem: Creative Labs SB0570 [SB Audigy SE] Flags: bus master, medium devsel, latency 32, IRQ 16 I/O ports at c000 [size=32] Capabilities: Kernel driver in use: CA0106 Kernel modules: snd-ca0106 I've tried reverting those upgraded packages that look like the could impact the kernal - but to no avail. alsamixer does not have anything muted, I've been though all the sound card debug/troubleshooting pages I can find. Kernal driver is attached. So whats gone pop ? I will boot from CD to check - but I am pretty sure this is a sw and not a hw problem.

    Read the article

  • Becoming the well-integrated content company (and combating AIUTLVFS)

    - by Lance Shaw
    Every single day, each of us create more and more content. Sometimes it is brand new material and many times it is iterations of existing content, but no one would argue that information and content growth is growing at an almost exponential rate. With all this content being created and stored, a number of problems naturally arise. One of the most common issues that users run into is "Am I Using The Latest Version of this File Syndrome", or AIUTLVFS. This insidious syndrome is all too common and results in ineffective, poor or downright wrong business decisions being made.  When content or files are unavailable or incorrect within the scope of key business processes, the chance for erroneous and costly business decisions is magnified even further. For many companies, the ideal scenario is to be able to connect multiple business systems, both old and new, into one common content repository.  Not only does this reduce content duplication, it also helps guarantee that everyone in various departments is working off the proverbial "same page".  Sounds simple - but for many organizations, the proliferation of file shares, SharePoint sites, and other storage silos of content keep the dream of a more efficient business a distant one. We've created some online assets to help you in your evaluation and eventual improvement of your current content management and delivery systems. Take a few minutes to check out our Online Assessment Tool.  It's quick, easy and just might provide you with insights into how you can improve your current content ecosystem. While you are there, check out our new Infographic that outlines common issues faced by companies today. Feel free to save our informative Infographic PDF and share it with business colleagues and your management to help them understand the business costs and impact of inaction. Together we can stop AIUTLVFS in its tracks and run our businesses more effectively than ever. Additionally, we hope you will take a few minutes to visit our new and informative webpages dedicated to the value of a well connected, fully integrated content management system. It's a great place to learn more about how integrating WebCenter Content into your infrastructure can lower your operational costs while boosting process and worker efficiency.

    Read the article

  • How to manage two video cards on a laptop (ATI and Intel)?

    - by Marc-François Cochaux-Laberge
    I have a laptop with two video cards. One ATI and on integrated Intel. On Windows, I can choose which video card I want to use. For example, I use the Intel card for normal use and for gaming, I switch to my ATI card for better performance, but a shorter battery life. In Ubuntu 10.10, only the Intel driver is installed, the ATI driver for my card doesn't work at all and there's heat coming out of my computer all the time, like when I'm playing video games on Windows. I think both cards are active, but only the Intel one is usefull. How can I solve this by making sure Ubuntu is aware of the two video cards and by disabling my ATI. Or may be I am all wrong about this?

    Read the article

  • No HDMI sound output on Thinkpad X1

    - by nickf
    I'm having problems getting my sound to output via HDMI to my TV. When I go to Sound Settings, the HDMI device does not appear. ~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 I don't know if the video information is helpful, but anyway: ~$ sudo lshw -C video *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:d0000000-d03fffff memory:c0000000-cfffffff ioport:5000(size=64) Any suggestions for me?

    Read the article

  • Intel PRO/1000 Server NIC on Windows latency. How to measure?

    - by Bobb
    Please note - this question is about latency of the card itself. Not latency of internet or anything else. Thank you for your attention on this matter. It is often said that good server NIC does make difference compared to low grade cards and on-board Ethernet chips. I understand that on-board chip will likely consume CPU time and stand-alone card would use its own chip. Also server card would be faster than low-grade card. Are these 2 facts explaining most of the server cards advantages over on-board and low-grade cards ethernet? How would you measure latency on the card itself? I saw some reports stating some microseconds figures of NIC latency but I dont see how to measure that... Any advise will be appreciated.

    Read the article

  • Live-Ubuntu 12.04 ran fine, now stopped booting!

    - by user89743
    I've seen similar problems to this several times in the forum, but mine is a bit different, so the other posts I saw were no help to me. When I boot Ubuntu 12.04 64-bit from live-SD-card (3GB persistence) I suddenly get this error: (initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: Invalid argument Can not mount /dev/loop/0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs (it says I can type "help" for commands, but I don't know anything about how to go from there, totally new to linux) The reason I say my case is different is because my Ubuntu worked fine for over a week, even pretty fast, and now this problem happened. Before that I used to run my live ubuntu from USB sticks but that was slower (especially when booting which took 15 minutes from USB stick!). Also I kept getting the same above problem after a while when booting and had to re-create a live USB linux several times. Installing on harddrive is not an option because my harddrive has physical damage and getting a replacement will take a while, therefore I can only use live-USB or live-SD-card Ubuntu. As I said I used Ubuntu without problems for more than a week, before that as well for several weeks on USB sticks, but the above problem occured sooner or later. This time I paid attention to when it happened: I was rebooting my computer (HP 620 laptop, 4 GB RAM, 64 bit system) from SD flash card and when I was booting I selected F6 and then the first option "no acpi" or something like that...I had used it before and noticed it slowed down the time it took Linux to use. This time it caused this error. Now even when I boot normally/default I get this error. Now I'm accessing Ubuntu from my USB stick without persistence file, when I check my SD card, all the files mentioned in the error message are there and the filesystem.squashfs is 691.2 MB so nothing seems to have been deleted by accident. (I have already made many changes/downloaded programs to my SD card persistent Ubuntu and would hope to loose them, since downloading is expensive for me, and since the problem seems to re-occur...) Can anyone help me, preferably without having to create another startup disk on my SD card? I'm totally new to this. Sorry for the long posts, just didn't know what info is relevant and what isnt! Kon

    Read the article

  • Ubuntu running like mud, system hangs and looks like its running at 3FPS

    - by user240803
    the system specks: AMD XP 3200+ 1GB DDR 333 RAM 160 GB HD IDE NVIDIA FX 5500 AGP Video Card Compaq Presario sr1230nx the system takes forever to boot and when it does it runs like total mud, reminds me of an overloaded system that has too many windows open or something... fresh install tried soo many thing like new memory (it had 512 stick) a new video card (onboard 8mb sis sounded like the problem, but wasn't... has gotten a little faster now but not by much) tried to disable all the things on the motherboard that could be, with no help... this machine runs windows XP, 7, and 8 JUST FINE!!! I mean for a single core CPU WIN8 runs AWESOME!!! BUT I already have a Gaming Desktop that has Windows 8 pro I want a Linux machine to get some time in and learn a few things... I want Ubuntu because of the Software center so I can install things I want until I am familiar with the command line.. I've worked on Computers since I was 12 I remember some of the DOS commands but I guess these are a little different... anyway any ideas? Ive also tried both drivers for the NVIDA card and that didn't help either... its not the card since it did this with both the NVIDA card and the SIS onboard... it also does this on live mode with the USB so I don't think its the HardDrive... I'm running out of options of hardware to try... I know this version of Linux works cuz Ive booted it on other machines and it ran great... what is with this Compaq? here is a vid of exactly what its doing... let me know if you need anything else I am right by the comptuer tonight so ask anything... http://youtu.be/-P-XNo81098

    Read the article

  • Fast Data Executive Round Table FY14 event kit

    - by JuergenKress
    We are very interested to run joint marketing events jointly with you as our partners! At our SOA Community Workspace (SOA Community membership required) you can find a new Fast Data Executive Round Table FY14 event kit. This event is designed at senior IT and executives level for the purposes of education, awareness, and thought leadership around the subject of big data; and a specific flavor of big data - Fast Data - that has begun to spark the imagination of many Oracle customers. Fast Data is not new. It’s a term that was invented initially by Ovum’s Tony Baer as a way to represent the collection of ‘high velocity’ solutions with respect to the big data. For Oracle, the Fast Data campaign in FY13 began as a way to tie a broader set of solutions together (SOA/Business Process Management, Data Integration and Business Analytics) under a set of use cases focused on real-time, high velocity data. It has helped to give Oracle a leap-frog advantage over many of the niche integration vendors (i.e. Informatica, Pega, Tibco, Software AG, Terracotta) who haven’t been able to address these types of end-to-end use cases which rely on the combination of filtering, in-memory data processing, correlation, real-time data movement and transformation, end-to-end analytics, and business process management. Only Oracle can address all the dimensions of fast data, and only Oracle can provide a set of engineered solutions to address this space. This event is designed to continue that thought leadership momentum and raise the awareness about what Oracle Fast Data solutions are designed to solve. It’s designed to highlight real customer solutions and articulate the business benefits that fast data can address. This is not an event that gets into the esoteric technical standards of Hadoop, NoSQL, and in-memory data grids. This is an event that instead gets into the heart of business problems that big data has left un-addressed and charts the path for next steps in fast data. Get the Fast Data Executive Round Table FY14 event kit here. Support marketing campaigns We can support such events by: Oracle speakers - contact your partner manager Marketing budget - contact your A&C marketing manager Event location - free use of Oracle Customer Visitor Centers conference rooms Promote your event at events.oracle.com: http://tinyurl.com/eventspecialized E-Blast: invite customers to your event – contact your A&C marketing manager For additional marketing kits e.g for Business Process Managementplease visit our SOA Community Workspace. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags:

    Read the article

  • How to host an AP or a hotspot?

    - by user1048138
    I'm running Ubuntu 12.04 as a virtual machine on my Mac. Since I am unable to get the virtual machine to have full access to my WiFi card, I bought another USB WiFi card to use. This is my WiFi card. If you are unfamiliar with Virtual machine, as far as I know, since the Ubuntu has its own card now, it shouldn't matter. I have followed these guides with no luck: https://help.ubuntu.com/community/WifiDocs/WirelessAccessPoint http://www.danbishop.org/2011/12/11/using-hostapd-to-add-wireless-access-point-capabilities-to-an-ubuntu-server/ The problem is that the WiFi connection appears on all of the machines that I have in my house: 2 iPhones, Dell machine running Ubuntu and two Macbooks. However the connection times out on all of these machines. Questions: Could this be a driver issue if that same WiFi card can connect to other WiFi points and use its internet Could this be DHCP related? I would think not. It should at least get a 169.X.X.X address? No? Any solutions for me?

    Read the article

  • ATG Live Webcast Nov. 8th: Advanced Management of EBS with Oracle Enterprise Manager

    - by Bill Sawyer
    The task of managing and monitoring Oracle E-Business Suite environments can be very challenging. The Application Management Pack plug-in is part of Oracle Enterprise Manager 12c Application Management Suite for Oracle E-Business Suite. The Application Management Pack plug-in is designed to monitor and manage all the different technologies that constitute Oracle E-Business Suite applications, including midtier, configuration, host, and database management—to name just a few. Customers that have implemented Oracle Enterprise Manager have experienced dramatic improvements in system visibility, diagnostic capability, and administrator productivity. This webcast will highlight the key features and benefits of Oracle Enterprise Manager, the latest version of the Oracle Application Management Suite for Oracle E-Business Suite. Advanced Management of Oracle E-Business Suite with Oracle Enterprise Manager Date:                Thursday, November 8, 2012Time:               8:00 AM - 9:00 AM Pacific Standard TimePresenters:   Angelo Rosado, Principal Product Manager, E-Business Suite ATG                         Lauren Cohn, Principal Curriculum Developer, E-Business Suite ATGWebcast Registration Link (Preregistration is optional but encouraged)To hear the audio feed:   Domestic Participant Dial-In Number:           877-697-8128    International Participant Dial-In Number:      706-634-9568    Additional International Dial-In Numbers Link:    Dial-In Passcode:                                              103191To see the presentation:    The Direct Access Web Conference details are:    Website URL: https://ouweb.webex.com    Meeting Number:  591460967 If you miss the webcast, or you have missed any webcast, don't worry -- we'll post links to the recording as soon as it's available from Oracle University.  You can monitor this blog for pointers to the replay. And, you can find our archive of our past webcasts and training here. If you have any questions or comments, feel free to email Bill Sawyer (Senior Manager, Applications Technology Curriculum) at BilldotSawyer-AT-Oracle-DOT-com.

    Read the article

  • How to blacklist a PCI device so a system can boot?

    - by Reda Lazri
    I installed Ubuntu 10.10 on someone's computer which it had a 'Connexant Fusion 878A' PCI card installed, the card is problematic, I had to unplug it just to use the Live CD. Now my question is how to know which module to blacklist, so he can use the card in Windows and override it when he boots into Ubuntu. There's a twist, I can't plug it and lsmod it because it won't let the system boot up even in 'Recovery Mode'. Kernel: 2.6.35-22

    Read the article

  • ATI HD5450 w/ Ubuntu 14?

    - by Oliwb
    So, I'm running Ubuntu 12.04 right now. Last night I realised that I'm way behind as we're up to 14! Decided to run the updater and figured I'd take the path of least resistance (but lengthy choice) of going 12.04 - 12.10 - 13.xx - 14.xx. So I download the first packet and then get an error message about my graphics card perhaps not working in 12.10. Now part of the reason I was looking to upgrade is because I get (and have always had) this strange occasional flickering - now that I have two screens it's just on the second monitor.....oddly this is not the same port that was giving issues before). The graphics card is an ATI Radeon HD5450 and I have the Catalyst (I think it's 13 or 14) driver installed - last night. It could be that the graphics card has never worked properly...I bought the PC new and with an "upgraded" video card and it's always suffered with this flicker. I just figured that the drivers weren't right or something. So I have 3 questions: 1) is my video card broken or is the driver letting it down and causing the flicker? 2) will it be able to handle the upgrade to 14 via 13? Or should I cut my losses and get something newer? 3) if I should get something newer....what should I get ( Thanks in advance....

    Read the article

  • Dual 7950, freezes during startup

    - by Hiro
    I have two identical video cards right now. Xubuntu will boot up no problem if I only have one card installed. If I install the 2nd card it will just hang midway thru the loading screen. Regardless of which card I use and which position on the motherboard, it will freeze if I have both installed. I've tried installing the proprietary drivers, both fglrx and fglrx-updates, still freezes in the same spot. Uninstalled those and went back to the default ones. The only way I can get a terminal is by booting into failsafe mode. Booting using 13.10 i386 on a USB stick gives me some errors related to what I think is the 2nd video card: [drm:r600_ring_test] ERROR radeon: ring 1 test failed (scratch(0x850C)=0xCAFEDEAD) [drm:r600_dma_ring_test] ERROR radeon: ring 3 test failed (0x02FFFF6B) radeon 0000:0200.2 disabling GPU acceleration"

    Read the article

  • How do I disable a Nvidia 9600GT on MacBookPro 5.1?

    - by Gjan
    i finally put up a Dual Boot with Ubuntu and Lion on my old MacBookPro 5.1 As reported in many cases the discrete graphics card is turned on all the time consuming a lot of power and thus heating up the laptop. Since the discrete graphics card does not support the nvidia optimus technology, the corresponding packge nvidia-prime does not help in this case. Therefore my question is, how to manually disable the discrete graphics card Nvdidia 9600GT ? Preferably a 'switch-on-the-run' version, but a 'set-on-boot' would be totally fine!

    Read the article

  • Wifi connection problems

    - by user12511
    I have Ubuntu 10.10 installed on a HP Pavilion DV2750ea. The wifi card is an Intel 4965AGN. When I first started using Ubuntu on this laptop it connected wirelessly to the network. Then it suddenly stopped. The Wifi card power light is off and all information says the card is disabled. When the laptop is powered on the wifi power light turns on and stays on until Ubuntu finishes loading. I have replaced the wifi card and the wifi switch module with no change. Please can you help.

    Read the article

  • Upgraded Ubuntu from 12.04 to 12.10 Ati radeon HD 3450 Catastrophe!

    - by minime
    When I had upgraded everything was ready on the screen om my computer and with my 12.04 ubuntu. When I restarted my system, the graphics card was not detected. I was forced to start the computer in low graphics mode, and eventually I had a pink deskop with only my maps, and no other programs at all. What do I do now? I need to recover the pictures on my system so that I can upload them online. I'd done a graphics card test on the terminal initially, and it showed that the card was compatible with unity 3D. I have an ATI radeon HD 3450 and I was running a 32 bit build of Ubuntu 12.04 initially Right now I have a broken install of Linux, with no working graphics card or desktop to start from, so I'm unsure of how to fix this.

    Read the article

< Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >