Search Results

Search found 8128 results on 326 pages for 'daily tips'.

Page 138/326 | < Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >

  • AWStats consumes too much resource, how to disable temporarily

    - by trante
    For some days AWStats takes %10-%20 of my CPU, takes 400-550 MB RAM and works for hours. Maybe my site's traffic became larger so process time takes more time than before or some bugs in program makes this. Anyway I want to disable AWStats temporarily. Maybe I would want to activate it in future. I found that answer. But it gives commands to remove AWStats. I only want to disable it temporarily. My system is Centos 6.3, Plesk 11.5.30 Update #19. I tried to disable cron jobs. I run this # killall awstats.pl I opened # vi /etc/cron.daily/awstats file and I changed it to this: #!/bin/sh #/usr/share/awstats/awstats_updateall.pl now -awstatsprog=/var/www/cgi-bin/awstats/awstats.pl -configdir=/etc/awstats >/dev/null 2>&1 exit 0 After some time I still see that awstats is running. What should I do more to not to awstats run again ? But without removing my files. After changing " /etc/cron.daily/awstats" file awstats doesn't start in daytime. But every night in 03:15 awstats starts again. Because of Plesk auto updates are working at that time, I changed from Plesk. Don't auto update automatically. But it seems like last night at 03:15 awstats started again. Is there any way to stop awstats temporarily except this solution ? Because this solution deletes awstats configs permanently and I don't know how to revert it back in future ? Turn off all AWStats for Plesk 11+ domains #!/bin/bash for i in /var/www/vhosts/*; do echo "Turning off and deleting Stats for" echo `basename $i` /usr/local/psa/admin/bin/webstatmng --unset-configs --stat-prog=awstats --domain-name=`basename $i` /usr/local/psa/admin/bin/webstatmng --clean --stat-prog=awstats --domain-name=`basename $i` done

    Read the article

  • Automatically check for Security Updates on CentOS or Scientific Linux?

    - by Stefan Lasiewski
    We have machines running RedHat-based distros such as CentOS or Scientific Linux. We want the systems to automatically notify us if there are any known vulnerabilities to the installed packages. FreeBSD does this with the ports-mgmt/portaudit port. RedHat provides yum-plugin-security, which can check for vulnerabilities by their Bugzilla ID, CVE ID or advisory ID. In addition, Fedora recently started to support yum-plugin-security. I believe this was added in Fedora 16. Scientific Linux 6 did not support yum-plugin-security as of late 2011. It does ship with /etc/cron.daily/yum-autoupdate, which updates RPMs daily. I don't think this handles Security Updates only, however. CentOS does not support yum-plugin-security. I monitor the CentOS and Scientific Linux mailinglists for updates, but this is tedious and I want something which can be automated. For those of us who maintain CentOS and SL systems, are there any tools which can: Automatically (Progamatically, via cron) inform us if there are known vulnerabilities with my current RPMs. Optionally, automatically install the minimum upgrade required to address a security vulnerability, which would probably be yum update-minimal --security on the commandline? I have considered using yum-plugin-changelog to print out the changelog for each package, and then parse the output for certain strings. Are there any tools which do this already?

    Read the article

  • Why do weekly tasks created via PowerShell using a different user fail with error 0x41306

    - by Danny Tuppeny
    We have some scripts that create scheduled jobs using PowerShell as part of our application. When testing them recently, I noticed that some of them always failed immediately, and no output is ever produced (they don't even appear in the Get-Job list). After many days of tweaking, we've managed to isolate it to any jobs that are set to run weekly. Below is a script that creates two jobs that do exactly the same thing. When we run this on our domain, and provide credentials of a domain user, then force both jobs to run in the Task Scheduler GUI (right-click - Run), the daily one runs fine (0x0 result) and the weekly one fails (0x41306). Note: If I don't provide the -Credential param, both jobs work fine. The jobs only fail if the task is both weekly, and running as this domain user. I can't find information on why this is happening, nor think of any reason it would behave differently for weekly jobs. The "History£ tab in the Task Scheduler has almost no useful information, just "Task stopping due to user request" and "Task terminated", both of which have no useful info: Task Scheduler terminated "{eabba479-f8fc-4f0e-bf5e-053dfbfe9f62}" instance of the "\Microsoft\Windows\PowerShell\ScheduledJobs\Test1" task. Task Scheduler stopped instance "{eabba479-f8fc-4f0e-bf5e-053dfbfe9f62}" of task "\Microsoft\Windows\PowerShell\ScheduledJobs\Test1" as request by user "MyDomain\SomeUser" . What's up with this? Why do weekly tasks run differently, and how can I diganose this issue? This is PowerShell v3 on Windows Server 2008 R2. I've been unable to reproduce this locally, but I don't have a user set up in the same way as the one in our production domain (I'm working on this, but I wanted to post this ASAP in the hope someone knows what's happening!). Import-Module PSScheduledJob $Action = { "Executing job!" } $cred = Get-Credential "MyDomain\SomeUser" # Remove previous versions (to allow re-running this script) Get-ScheduledJob Test1 | Unregister-ScheduledJob Get-ScheduledJob Test2 | Unregister-ScheduledJob # Create two identical jobs, with different triggers Register-ScheduledJob "Test1" -ScriptBlock $Action -Credential $cred -Trigger (New-JobTrigger -Weekly -At 1:25am -DaysOfWeek Sunday) Register-ScheduledJob "Test2" -ScriptBlock $Action -Credential $cred -Trigger (New-JobTrigger -Daily -At 1:25am)

    Read the article

  • Mirror a RAID0 volume

    - by Ghostrider
    I have two SSD running in RAID0. The capacity and speed are just great. I use Windows Home Server to do incremental daily backups. This is fine and well and I've successfully restored from these backups. However. When one of the disks physically died. I was stuck without a working system until the replacement arrives so that I can restore the array from backup. WHS restoration takes about 5 hours which basically means that I'm losing entire day for the process. Is it possible to set up kind of a recovery volume for the RAID array? Use a single mechanical HDD that would be updated with the exact clone of the RAID array on a daily basis. This way if the array goes offline for some reason, I can just boot from the mechanical HDD, lose some perf but will still be able to work. The machine in question runs Windows 7. Creating RAID01 is not an option because of the high price of the SSD and the fact that it still doesn't protect against failure of RAID controller. Is there any way it can be set up?

    Read the article

  • how to cause linux system datetime to run faster than real world datetime?

    - by JamesThomasMoon1979
    Background I want to monitor a running linux system over several days. It's a custom gentoo build and with much custom software on board. This software has ongoing maintenance timers and cron scripts and other clock driven events. I need to verify these scheduled events are working. Problem Waiting for the system to step through daily and weekly activity is a long wait time. And modifying all clock-based timers on the system would be time consuming. Yet, I often want to test a system's end-to-end scheduled activities without waiting a week. Potential Solution Have the linux system under test appear to run through it's daily cycle of activity within just a few hours. My Question for Serverfault Is there a way to cause the system's time to run faster than real world time? My first thought is manipulating the ntp daemon to repeatedly and smoothly increment the clock . Any other ideas? And yes, I know this may have strange side affects. However, the system has no important or time critical interactions with systems outside of itself. And this may be a valuable testing technique.

    Read the article

  • Accounting setup in freeradius with mikrotik and the "always" module

    - by Matt
    I have a freeradius setup that is being used to provide authentication for users on a wireless network. The access points are all Mikrotik hardware and the users are connected 24/7. We've been using Daloradius with mysql and freeradius 2. The boss wants to use the accounting information and while this is all set up and appears to be working, I've found that not all the accounting information is present. Since our users may be connected for more than 24 hours at a time we keep this in here, it will reset some attributes daily so that the accounting packets work correctly. So he started poking around at this link: http://wiki.mikrotik.com/wiki/RouterOs_MySql_Freeradius#Configuring_RouterOs_for_Radius_.26_PPP.2A_AAA And was looking specifically at the following section. Since our users may be connected for more than 24 hours at a time we keep this in here, it will reset some attributes daily so that the accounting packets work correctly always fail { rcode = fail } always reject { rcode = reject } always ok { rcode = ok simulcount = 0 mpp = no } However, that link references freeradius 1 and I can't find this in the radius.conf file for freeradius 2. What does it do and could it be a reason I'm missing data? EDIT: I have found one issue. We have a backup freeradius server that is also receiving the accounting packets. Although they are replicating, it's only a master/slave configuration. If the slave receives accounting packets it won't replicate them back to the master. Although I suspect this might solve it, the boss is not convinced due to the always module. Is there anything special I need to configure in the mikrotik AP's or freeradius 2 for clients connected 24/7.

    Read the article

  • Database types for customer analytics

    - by Drewdavid
    I am exploring a paid solution to start providing better embedded, dashboard-style analytics information to our website customers/account holders, but would like to also offer an in-house development option to our team. The more equipped I am with specifics (such as the subject of this question), the better the adoption rate from the team (or so I have found), regardless of the path we choose Would anyone care to summarize a couple of options for a fast and scalable database type through which we would provide the following: • Daily pageviews to a users account pages (users have between 1 and 1000 pages) • Some calculated/compounded metrics (such as conversion rate, i.e. certain page type viewed to contact form thank you page ratio) • We have about 1,500 members (will need room to grow); the number of concurrently logged in users will for the question's sake be 50 I ask because our developer has balked at providing this level of "over time" granularity (i.e. daily) due to the number of space it would take up in a MYSQL database To avoid a downvote I have asked specifically for more than one option, realizing that different people will have different solutions. I will make amendments to my question if so guided by answering parties Thank you for sharing your valued answers :)

    Read the article

  • Accounting setup in freeradius with mikrotik and the "always" module

    - by Matt
    I have a freeradius setup that is being used to provide authentication for users on a wireless network. The access points are all Mikrotik hardware and the users are connected 24/7. We've been using Daloradius with mysql and freeradius 2. The boss wants to use the accounting information and while this is all set up and appears to be working, I've found that not all the accounting information is present. Since our users may be connected for more than 24 hours at a time we keep this in here, it will reset some attributes daily so that the accounting packets work correctly. So he started poking around at this link: http://wiki.mikrotik.com/wiki/RouterOs_MySql_Freeradius#Configuring_RouterOs_for_Radius_.26_PPP.2A_AAA And was looking specifically at the following section. Since our users may be connected for more than 24 hours at a time we keep this in here, it will reset some attributes daily so that the accounting packets work correctly always fail { rcode = fail } always reject { rcode = reject } always ok { rcode = ok simulcount = 0 mpp = no } However, that link references freeradius 1 and I can't find this in the radius.conf file for freeradius 2. What does it do and could it be a reason I'm missing data? EDIT: I have found one issue. We have a backup freeradius server that is also receiving the accounting packets. Although they are replicating, it's only a master/slave configuration. If the slave receives accounting packets it won't replicate them back to the master. Although I suspect this might solve it, the boss is not convinced due to the always module. Is there anything special I need to configure in the mikrotik AP's or freeradius 2 for clients connected 24/7.

    Read the article

  • Map FTP folder to folder on different FTP server

    - by jolt
    In my team we work a lot with FTP. We upload and download files from several different servers daily. Currently every member of the team manages access credentials to each FTP server locally on their own machine. I am looking for a way to set up a central FTP server that we can connect to, and from there, navigate to folders that each represent one of the other FTP servers that we connect to daily. Something like this: In-house central FTP server: |- FolderA --> server A root folder |- FolderB --> server B root folder |- FolderC --> server C root folder A setup like this, would mean that we can manage access credentials on the central FTP server, and team members would only need to have the access credentials to the central FTP server, and from there they could navigate to the other servers through these "virtual" folders. We could potentially develop our own custom FTP server that just forward requests to the remote FTP servers, but i feel like something like this (or something similar) would already have been done. So I'm looking for pointers that could help us find software for Windows that could help us to simplify our current setup. Thank you! Similar (unanswered) question here: FTP management server

    Read the article

  • SQL Server Backup modes, and a huge log file

    - by Matt Dawdy
    Okay, I'm not a server administrator, a network guy, or a DBA. I'm merely a programmer helping out a small company. They have IT guy who isn't MS centric (most stuff is on Mac) and he and I are trying to figure out a solution here. We've got 1 main database. We run nightly full backups. I know they are full backups because I can take the latest file, or any of the daily backups, and go to a completely new machine and "restore" the backup to an empty database and our app runs perfectly fine off of this backup. The backups have grown from 60 MB to 250MB over 4 months. When running, then log file is 1.7 GB, and the data file is only 200-300 MB. Yes, recovery model is set to full. So, my question, after all of that, if we are keeping daily backups, and we don't have the need / aren't smart enough to roll the DB back to a certain time, if I change the recovery mode to simple, am I really losing anything? And, if I do change it to simple, will it completely dump the log file or at least reduce it way the hell down? And, will that make our database run faster? I know that it'll make my life easier when I copy a relatively recent backup to my local machine to do development and testing...

    Read the article

  • Windows 7 BSOD when I walk away from the computer

    - by bobobobo
    I have a really weird experience with this new AM3 box I set up. Everything seems fine at first. But now I get frequent (daily) BSOD's, mostly when I walk away from the computer for more than 5 minutes (when the computer is idle). The BSOD's as shown by BlueScreenView almost always have to do with ntoskrnl.exe, and they'll do with really normal sounding operations, like SYSTEM_SERVICE_EXCEPTION, NTFS_FILE_SYSTEM, DRIVER_IRQL_NOT_LESS_OR_EQUAL, KMODE_EXCEPTION_NOT_HANDLED, BAD_POOL_HEADER - You name it. These are basically them, and they repeat after that, just random order. Its not like one is more consistently the problem than the other. I have Windows update ON and I let it do its updates everytime it wants to. I turned windows indexing service off, but it seems Windows 7 does a lot of background processing when I'm away - I'll come into the room and the fan will be going nuts (I'm pretty sure this isn't because the computer flies into a panic whenever I leave). I tried finding updates for my ASUS, and really there isn't much to install (except some new driver firmware). I'm going to install that to see if it helps, but what else could it be? Is it possible its a hardware issue with the board? Or is every Windows 7 user experiencing daily BSOD these days that I don't know about?

    Read the article

  • effective back-up using Raid / Win7 back-up

    - by Job
    I have a stand-alone pc system with two 2 tb harddiscs, one of which configured as Raid1, i.e. mirorring. The operational drive is partitioned. I use an external 1 tb harddisc for back-up using Windows 7 back-up facility which will be swapped weekly and stored on other premises. I back-up all partitions AND allow a system back-up. All application software is on the C: partition. Questions: How can I see whether Raid1 is working; i.e. is doing its job. All I see now is a status message in the start-up procedure that says its status is normal. How can I see used or available space on Raid 1? The Win-7 backup allows for 1 schedule only as far as I can see. I want daily back-ups of data. However due to the single schedule I am forced to do the time-consuming system back-up and c: back-up as well. Is there a way to activate two schedules allowing a frequent (daily) data back-up and a system back-up with c: drive back-up on a say weekly basis? Of course it can be forced by hand but I am likely to forget that. I am not the programming type of person so looking for simple and controllable solutions. Thank you - any help is apreciated.

    Read the article

  • Server configration for our website [duplicate]

    - by Varun Varunesh
    This question already has an answer here: Can you help me with my capacity planning? 2 answers We are a start-up and 6 month back we have launched our beta version website. Now we are in a phase of building our website and web-services for the final product. This website will be based on PHP, Python, MySql database and with wamp server. Right now in the beta version we are using Azure VM for hosting, with configuration of 786MB RAM and Shared CPU. We have 200 avg users daily coming to our website. Now we are trying to increase the number of users from 200 to 1500 daily users. And I am thinking our server should have capability to handle at least 100 concurrent user. Also we have developed web-services for our mobile-apps. Which can also increase loads on the sever. So here are the question that takes me here, I am pretty much confused about whether to go with shared hosting or VM based hosting. If VM, then what configuration will be best for our requirement (as I discussed above) ? Currently our VM is a Windows based server and its very simple to manage, So other than cost factor why should I go for Linux based sever? What other factor should I keep in mind while choosing the server as per our requirement ?

    Read the article

  • RD Gateway reporting features/capabilities

    - by Don
    We have just implemented RD Gateway for our own department in preparation for a push to the whole agency for telecommuting. It is all setup and working great, but I was trying to figure out how best to go about monitoring/reporting of users. I see third party software out there that will do it, but is there anything built-in or via powershell/scripting that I could use that would give me a report of the daily activity of users? Something to say, "User A connected at this time, was on for this long, sent/received this much data"? Basically some of the same stuff you can see in event viewer. Ideally I'd like to be able to have this setup so that once a day it emails me with the daily usage for when a supervisor asks about if their person is actually working (or at least online sending and receiving x amount of data), I'll have some metrics to give them. I realize that actual work output is relevant and more of a managerial issue, but I would like to be able to offer as much as I can from my end when asked. Thoughts? Thanks!

    Read the article

  • logrotate deletes all maillogs older than one day

    - by shadyabhi
    I see only two files maillog and maillog.1 in /var/log. grepping for maillog in logrotate.d directory gives three files that have a mention of maillog. syslog /var/log/messages /var/log/secure /var/log/maillog /var/log/spooler /var/log/boot.log /var/log/cron { #/var/log/messages /var/log/secure /var/log/spooler /var/log/boot.log /var/log/cron { daily sharedscripts postrotate /bin/kill -HUP `cat /var/run/syslogd.pid 2> /dev/null` 2> /dev/null || true /bin/kill -HUP `cat /var/run/rsyslogd.pid 2> /dev/null` 2> /dev/null || true endscript } syslog-ng /var/log/messages /var/log/secure /var/log/maillog /var/log/spooler /var/log/boot.log /var/log/cron /var/log/kern.log /var/log/kern { sharedscripts postrotate /bin/kill -HUP `cat /var/run/syslogd.pid 2> /dev/null` 2> /dev/null || true /bin/kill -HUP `cat /var/run/rsyslogd.pid 2> /dev/null` 2> /dev/null || true endscript } and maillog. /var/log/maillog { daily compress # rotate 365 rotate 14 sharedscripts postrotate /bin/kill -HUP `cat /var/run/syslogd.pid 2> /dev/null` 2> /dev/null || true /bin/kill -HUP `cat /var/run/rsyslogd.pid 2> /dev/null` 2> /dev/null || true endscript } I am new to logrotate so may be I am missing something obvious. What can be the issue? The setup was already done when I started managing the server so I don't also know as do why do I have 3 mentions for maillog in logrotate.

    Read the article

  • Is there a monitoring software suite that will alert me if it has received no activity in a time period?

    - by matt b
    This might be a very basic question, but I am not very familiar with the exact features of Nagios versus Munin versus other monitoring tools. Let's say we have a process that needs to run daily for some very important infrastructure reasons. We've had cases where the process did not run or was otherwise down for a number of days before anyone noticed. I'd like to set up a system that will enable me to easily know when the daily run did not take place for some reason. I can set up this process to send an email on every successful run (or every failed run), but I do not trust that the people receiving this email would notice an absence of an "I'm OK" message. What I am envisioning is some type of "tripwire" service which this V.I.P. (very-important-process) can send a status message to each time it runs, whether successfully or not; and if the "tripwire" service has not received any word from the VIP within a configurable amount of time, it can then send an alert to someone. (The difference between what I envision and the first approach I outlined is a service that sends a message only in abnormal conditions, rather than a service that sends messages each day that the status is normal/OK). Can Nagios be set up to send an alert like this, if it has not heard from a certain service/device/process in N days? Is there another tool out there which does have this feature?

    Read the article

  • How can I use a TreeWalker to dump out the DOM

    - by michael
    Hi, In w3c dom interface, there is DOMTreeWalker to traverse the DOM. I find this example which uses DOMTreeWalker: http://www.java-tips.org/java-se-tips/org.w3c.dom/how-to-traverse-the-dom-tree-using-treewalker-2.html But my question is How can I use the DOMTreeWalk to dump the dom structure and value to a file? i.e. I need to know when a parent start and a parent end so that I can do when I dump the dom to a file (i need to insert after each parent dumps its children: <parent> <child a1="1" a2="2"/> <child a3="1" a4="3"/> <child a5="1" a6="5"/> </parent>

    Read the article

  • NetBeans 6.8/6.7 UML Class Diagrams

    - by ikurtz
    i have tried to generate Class Diagrams in NetBeans 6.7 and 6.8 but all i get is: i figured out installing UML for 6.8 here: NetBeans 6.8 UML i have followed the instructions here: UML Class diagrams i so far i failed to generate anything meaningful. i have followed the tips: Open your project, then create a new UML project (choose "Reverse Engineered Java-Platform model"). After that all your classes will be available in the UML project under "Model". You can now create a new class diagram and drag your classes from "Model" onto the diagram. but nothing meaningful happens when i drag my classes to the Class Diagrams. it always represents the classes as "datatype" on the diagram and class info is not displayed. any helpful tips regarding how can i fix this? or another way of generating Java class diagrams? thank you for your time.

    Read the article

  • Hidden features of CSS

    - by alex
    I have definitely picked up some useful tips in the hidden features style questions concerning PHP and XHTML. So here is one to cover CSS. While easy to pick up, it takes a little while to learn about everything, their default behaviors, properties etc Here are some to start the ball @charset "UTF-8"; /* set the character set. must be first line as Gumbo points out in comments */ .element { /* takes precedence over other stylings */ display: block !important; /* mozilla .... rounded corners with no images */ -moz-border-radius: 10px; /* webkit equivalent */ -webkit-border-radius: 10px } These are not so much hidden, but their use is not often widespread. What tips, tricks, rare features have you discovered with CSS?

    Read the article

  • perl: Run remote perl script through SSH and query environment variables on remote machine

    - by kakyo
    I'm running a perl script through SSH, in the perl script I query environment variables using $ENV{MY_VAR_NAME} and it works fine when run locally. But through SSH, all environment variables become unset. I also tried to run system("source ~/.bash_profile"); at the beginning of my script to no avail. Any tips? EDIT: Rephrasing my question. I have machine A and B. I ran my perl on machine B, trying to get the environment variables on B and it worked. Then I ssh from A to B running the same script, i.e., using this code ssh user@B perl myscript.pl This time the environment variables on B are all blank. Any tips? UPDATE: I found that running the above script, ~/.bashrc on Machine B was invoked, but after setting environment variables in ~/.bashrc, run the above command again and still I don't see any environment variables. Also, if my perl script contains only echo $ENV{PATH} Then I get /usr/bin:/bin:/usr/sbin:/sbin

    Read the article

  • XPath and special characters

    - by Bryan
    I am having an issue with an XPath query I'm performing for a Sitecore CMS system. This query works fine: /root/content/Meta-Data/Tips/* But when I try this: /root/content/Meta-Data/Tips/*[@SomeAttribute='somekey'] I get an error which says "End of string expected at position 22" which is where the dash character is found. I was under the impression that the dash was not a special character in XML... am I doing something wrong here? Do I need to encode this in some way? Or is this a bug in the XPath parser? Any suggested workarounds?

    Read the article

  • Storing ASP.Net MVC Views in the Database

    - by Adam Albrecht
    For an ASP.Net MVC application, I'm interested in storing some views and/or partial views in the database so that a few semi-technical users can do some basic view logic. Does anyone have any tips or lessons from experience on doing this? I know Phil Haack wrote a blog post on this about a year ago. He used IronRuby for scripting his views, (which would be fine for me). He created a quick proof-of-concept, but I can't find any other information on the topic. Any ideas, thoughts, tips, etc would be appreciated. Thanks!

    Read the article

  • Speeding up CakePHP

    - by DavidYell
    I've been a keen fan and user of CakePHP for about 2.5 years now, but the main bugbear that most fellow developers level at the framework is that it's slow, and the dispatch cycle takes too long to make it a viable solution for production environments. I'm hoping that this question will inspire people to share their tips, tricks and hacks for speeding up CakePHP performance. The blog post I most often refer to is here, http://www.pseudocoder.com/archives/8-ways-to-speed-up-cakephp-apps Which has great tips, but there must be more out there! So please feel free to share your thoughts on making this excellent framework that much more nimble!

    Read the article

  • How can I learn the math necessary for working with computer vision?

    - by Duncan Benoit
    I know that computer vision involves a lot of math, but I need some tips about how programmers gain that knowledge. I've started to use the OpenCV library but I have some major problems in understanding how the math works in the algorithms. In college I have studied some math and we worked with matrices and derivatives, but I didn't pay to much attention to the subject. It seemed to be so difficult and useless from a programmer point of view. I suppose that there has to be some easy way to understand what a second derivative is without calculating an equation. (Derivatives are just an example) Do you have any tips for me about how can i gain such knowledge? A forum, book, link, advice, anything?

    Read the article

< Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >