Search Results

Search found 8219 results on 329 pages for 'less'.

Page 138/329 | < Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >

• Column order can matter

  - by Dave Ballantyne

  Ordinarily, column order of a SQL statement does not matter. Select a,b,c from table will produce the same execution plan as   Select c,b,a from table However, sometimes it can make a difference.   Consider this statement (maxdop is used to make a simpler plan and has no impact to the main point):   select SalesOrderID, CustomerID, OrderDate, ROW_NUMBER() over (Partition By CustomerId order by OrderDate asc) as RownAsc, ROW_NUMBER() over (Partition By CustomerId order by OrderDate Desc) as RownDesc from sales.SalesOrderHeader order by CustomerID,OrderDateoption(maxdop 1) If you look at the execution plan, you will see similar to this That is three sorts.  One for RownAsc,  one for RownDesc and the final one for the ‘Order by’ clause.  Sorting is an expensive operation and one that should be avoided if possible.  So with this in mind, it may come as some surprise that the optimizer does not re-order operations to group them together when the incoming data is in a similar (if not exactly the same) sorted sequence.  A simple change to swap the RownAsc and RownDesc columns to produce this statement : select SalesOrderID, CustomerID, OrderDate, ROW_NUMBER() over (Partition By CustomerId order by OrderDate Desc) as RownDesc , ROW_NUMBER() over (Partition By CustomerId order by OrderDate asc) as RownAsc from Sales.SalesOrderHeader order by CustomerID,OrderDateoption(maxdop 1) Will result a different and more efficient query plan with one less sort. The optimizer, although unable to automatically re-order operations, HAS taken advantage of the data ordering if it is as required.  This is well worth taking advantage of if you have different sorting requirements in one statement. Try grouping the functions that require the same order together and save yourself a few extra sorts.

  Read the article

• TEAM Webinar - WebCenter Sites Connector

  - by kellsey.ruppel

  TEAM Webinar - WebCenter Sites Connector Connect WebCenter Sites 11g to WebCenter Content Thursday, June 21st, 2012 10AM CDT & 5PM CDT Register Now! WebCenter Sites (formerly FatWire) is an innovative web engagement platform that is creating considerable buzz within the Oracle community, especially with the latest release, Sites 11g. Have you been wondering whether Sites is right for your organization? Did you know that you can utilize the power of WebCenter Sites right now alongside your existing WebCenter Content (UCM) implementation? Attend this webinar to learn how the TEAM WebCenter Sites Connector (learn more) allows you to leverage the Oracle WebCenter Content enterprise content management platform and deliver centrally-managed content to all your WebCenter Sites 11g deployments. Furthermore, the Digital Asset Management (DAM) capabilities in WebCenter Content allow your web marketers to spend less time creating manual renditions for multimedia files and more time on achieving your web marketing goals. If you would like to see how you can enrich your web experience using the only WebCenter Sites connector on the market, this webinar is right for you!  Agenda * What's new in WebCenter Sites 11g?  * How can WebCenter Content enhance the Sites experience?  * Leverage centrally-managed content in Sites  * Why should I get started with the TEAM Sites Connector?  * Q & A session  To learn more about TEAM's WebCenter Sites Connector, register for one of our two sessions today: Session One: 10AM CDT Session Two: 5PM CDT TEAM WebCenter Sites Connector 

  Read the article

• Scientists Demonstrate First-Person Shooter Games Improve Vision

  - by Jason Fitzpatrick

  Need an excuse to log a few more hours playing Call of Duty or Medal of Honor? Scientists demonstrated improved vision in test subjects after daily doses of first-person shooter games. Scientists at McMaster University took subjects who, as the result of surgery correcting congenital cataracts, had less than 20/20 vision. Subjects played Medal of Honor for a total of 40 hours over the course of 4 weeks before having their vision retested. The results? The CBC reports: The participants found improvements in detail, perception of motion and in low contrast settings. In essence, players could now read about one to one-and-a-half more lines on an optometrist’s eye chart. “We were thrilled,” Lewis said. “It’s very exciting to open up a new world of hope for these people.” How to Get Pro Features in Windows Home Versions with Third Party Tools HTG Explains: Is ReadyBoost Worth Using? HTG Explains: What The Windows Event Viewer Is and How You Can Use It

  Read the article

• crunchbang: it takes up *how* much memory?!?!

  - by Theo Moore

  I've been trying many distros of Linux lately, trying to find something I like for my netbook. I started out with Ubuntu, and I can tell you I am a big fan. Ubuntu is now fast to install, much simpler to administer, and pretty light resource-wise. My original install was the standard 32 bit version of 9.04. I tried the netbook remix version of this release, but it was very, very slow. Even the full-blown version used only about 200mb. Much better than the almost 800 that the recommended Windows y version took. Once the newest release of Ubuntu was released, I decided to try the netbook remx of 10.04. It used even less RAM; only about 150mb. I thought I'd found my OS. I certainly settled in and prepared to use it forever. Then, someone I know suggested I try cunchbang. It is the most minimalistic UI I've ever seen, using Openbox rather than Gnome or KDE. Very slick, simple and clean. Since I am using the alpha of the most recent version (using Debian Squeeze), the apps provided for you are few...although more will be provided soon. You do have a word processor, etc., although not the OpenOffice you would normally get in Ubuntu. But the best part? 48MB. That's it. 48mb fully loaded, supporting what I can "hotel services". It's fast, boots quick, and believe it or not, I can even do Java-based development....on my netbook! Pretty slick.   More on it as I use it.

  Read the article

• SQL SERVER – Tell me What You Want to Listen – My 2 TechED 2011 Sessions

  - by pinaldave

  I am going to present two sessions at TechEd India on March 25th, 2011. I would like to know what do you want me to cover in this session. Watch the video taken by my wife when I was preparing for the session. Sessions Date: March 25, 2011 Understanding SQL Server Behavioral Pattern – SQL Server Extended Events Date and Time: March 25, 2011 12:00 PM to 01:00 PM SQL Server Waits and Queues – Your Gateway to Perf. Troubleshooting Date and Time: March 25, 2011 04:15 PM to 05:15 PM I promise following for both of my sessions: I will share the scripts demonstrated in the session right at the end of the sessions The sessions will be 300-400 level but I promise to make the concept very simple Less slides and lots of meaningful Demos Session close to real life cases and scenarios Surprise gifts to best participants I promise to answer all the questions either in session or right after the hall after the session Lots of Technical Education and FUN! Please leave your comments with your expectation and if you are going to attend the session do let me know here. We will for sure meet at the event and do some interesting talk. You can read the abstract of the session over here. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, T SQL, Technology Tagged: TechEd, TechEdIn

  Read the article

• CodePlex Daily Summary for Friday, May 23, 2014

  CodePlex Daily Summary for Friday, May 23, 2014Popular Releasesbabelua: 1.5.5: V1.5.5 - 2014.5.23New feature: support lua5.1 keywords auto completion; debug message would write to output window now; editor outline combobox’s members now will sorting by the first letter; Stability improvement: fix a bug that when search in a file which not exists in current setting folder , result of switch relative path function would not correct; Some other bug fix;DotNet.Highcharts: DotNet.Highcharts 4.0 with Examples: DotNet.Highcharts 4.0 Tested and adapted to the latest version of Highcharts 4.0.1 Added new chart type: Heatmap Added new type PointPlacement which represents enumeration or number for the padding of the X axis. Changed target framework from .NET Framework 4 to .NET Framework 4.5. Closed issues: 974: Add 'overflow' property to PlotOptionsColumnDataLabels class 997: Split container from JS 1006: Series/Categories with numeric names don't render DotNet.Highcharts.Samples Updated s...String.Format Diagnostic (Roslyn): Diagnostic Format String (v1,3): In this release the tool is now capable of reporting multiple issues contained within the text of a formatstring. v1.3 Extends these capability to include if the formatstring argument is a String Constant. Validation Rules Supported Are the Argument Index supplied within range, of those supplied? Is the Argument Index less than the limit of 1000000 (This is defined inside of the .net framework's implementation) Is the Alignment with less than the limit of 1000 000 (This is define insid...Aspose for Apache POI: Missing Features of Apache POI SL - v 1.1: Release contain the Missing Features in Apache POI SL SDK in Comparison with Aspose.Slides for dealing with Microsoft Power Point. What's New ?Following Examples: Managing Slide Transitions Manage Smart Art Adding Media Player Adding Audio Frame to Slide Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.OSGi.NET: Asp.net MVC 4.0 integration v2.2: + Support AreaRegistrationPowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.1.3: Added CompressLogs option to the config file. Each Install / Uninstall creates a timestamped zip file with all MSI and PSAppDeployToolkit logs contained within Added variable expansion to all paths in the configuration file Added documentation for each of the Toolkit internal variables that can be used Changed Install-MSUpdates to continue if any errors are encountered when installing updates Implement /Force parameter on Update-GroupPolicy (ensure that any logoff message is ignored) ...WordMat: WordMat v. 1.07: A quick fix because scientific notation was broken in v. 1.06 read more at http://wordmat.blogspot.comConEmu - Windows console with tabs: ConEmu 140522 [Alpha]: ConEmu - developer build x86 and x64 versions. Written in C++, no additional packages required. Run "ConEmu.exe" or "ConEmu64.exe". Some useful information you may found: http://superuser.com/questions/tagged/conemu http://code.google.com/p/conemu-maximus5/wiki/ConEmuFAQ http://code.google.com/p/conemu-maximus5/wiki/TableOfContents If you want to use ConEmu in portable mode, just create empty "ConEmu.xml" file near to "ConEmu.exe" WebExtras: v1.4.0-Beta-1: Enh: Adding support for jQuery UI framework Enh: Adding support for jqPlot charting library Dropping dependency on MoreLinq library Note: Html.LabelForV2(...) extension method has now been deprecated. You should use Html.RequiredFieldLabelFor(...) extension method instead. This extension method will be removed in future versions.????: 《????》: 《????》（c???）??“????”???????，???????????????C?????????。???????,???????????????????????. ??????????????????????????????????；????????????????????????????。Mini SQL Query: Mini SQL Query (1.0.72.457): Apologies for the previous update! FK issue fixed and also a template data cache issue.Wsus Package Publisher: Release v1.3.1405.17: Add Russian translation (thanks to VSharmanov) Fix a bug that make WPP to crash if the user click on "Connect/Reload" while the Report Tab is loading. Enhance the way WPP store the password for remote computers command.MoreTerra (Terraria World Viewer): More Terra 1.12.9: =========== = Compatibility = =========== Updated to account for new format 1.2.4.1 =========== = Issues = =========== all items have not been added. Some colors for new tiles may be off. I wanted to get this out so people have a usable program.LINQ to Twitter: LINQ to Twitter v3.0.3: Supports .NET 4.5x, Windows Phone 8.x, Windows 8.x, Windows Azure, Xamarin.Android, and Xamarin.iOS. New features include Status/Lookup, Mute APIs, and bug fixes. 100% Twitter API v1.1 coverage, Async, Portable Class Library (PCL).CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.26.0: Added access to the Release Notes during 'Check for Updates...'' Debug panels Added support for generic types members Members are grouped into 'Raw View' and 'Non-Public members' categories Implemented dedicated (array-like) view for Lists and Dictionaries http://download-codeplex.sec.s-msft.com/Download?ProjectName=csscriptnpp&DownloadId=846498ClosedXML - The easy way to OpenXML: ClosedXML 0.70.0: A lot of fixes. See history.TBox - tool to make developer's life easier.: TBox 1.29: Bug fixing. Add LocalizationTool pluginYAXLib: Yet Another XML Serialization Library for the .NET Framework: YAXLib 2.13: Fixed a bug and added unit tests related to serializing path like aliases with one letter (e.g., './B'). Thanks go to CodeProject user B.O.B. for reporting this bug. Added `Bin/*.dll.mdb` to `.gitignore`. Fixed the issue with Indexer properties. Indexers must not be serialized/deserialized. YAXLib will ignore delegate (callback/function pointer) properties, so that the exception upon serializing them is prevented. Significant improve in cycling object reference detection Self Referr...SFDL.NET: SFDL.NET (2.2.9.2): Changelog: Neues Icon Xup.in CnL Plugin BugfixSEToolbox: SEToolbox 01.030.008 Release 1: Fixed cube editor failing to apply color to cubes. Added to cube editor, replace cube dialog, and Build Percent dialog. Corrected for hidden asteroid ore, allowing rare ore to show when importing an asteroid, or converting a 3d model to an asteroid (still appears to be limitations on rare ore in small asteroids). Allowed ore selection to Asteroid file import. (Can copy/import and convert existing asteroid to another ore). Added progress bars to common long running operations. Fixed ...New ProjectsBlueCurve Search: BlueCurve is a small experimental search engine, implemented on top of Lucene. The goal is to test ways to create a powerfull search engine system framework.C64 Studio: C64 Studio is a .NET based IDE. The program supports project based C64 assembly and/or Basic V2 and is geared towards game development.ExpressToAbroad: ExpressToAbroadFarragoJS: A set of simple JavaScript functions: FarragoJS is a set of simple JavaScript functions offering features ranging from useful to totally pointless! But hey, there's a use for everything, right?fischetest: nothingIsDrone: Simple windows client for Parrot ar Drone. ??????? ?????? ??? Parrot ar Drone ??? Windows. Jewelry: this is project about auto generate codeMRBrowserLibrary: webbrowser control libraryQuan Ly Phong Tro DevExpress and LinQ: Quan Ly Phong Tro DevExpress + LinQUseless Games: JavaScript games written for practicing this wonderful language.?????-?????【??】?????????: ?????1992?,????????????????。??????????????????????。????????????,????，????????！ ?????-?????【??】?????????: ??????、??????????????????,???????.??????????,????????。 ?????-?????【??】?????????: ??????????????,????????????,????????,???,???????????,????,????。?????,??????. ?????-?????【??】?????????: ????????,???????????,??????????,????:??,????,???????? ??????????,????????。??????！ ?????-?????【??】?????????: ?????1992?,????????????????。??????????????????????。????????????,????，????????！ ?????-?????【??】?????????: ????????,???????????,??????????,????:??,????,???????? ??????????,????????。??????！ ?????-?????【??】?????????: ???????????????,??????,??????,??????、??????,??????、??，????，??????！ ?????-?????【??】?????????: ???????2005?,????????????????????,??????????,??????。?????,???????????????????，??????！ ?????-?????【??】?????????: ????????,???????????,??????????,????:??,????,???????? ??????????,????????。??????！ ?????-?????【??】?????????: ????????,???????????,??????????,????:??,????,???????? ??????????,????????。??????！ ?????-?????【??】?????????: ???????2005?,????????????????????,??????????,??????。?????,???????????????????，??????！ ?????-?????【??】?????????: ???????????????:??????!?????!???:????、????、????、????。??,??????????!??????. ??????-??????【??】??????????: ?????????????????????,??????,???????????,????????????????,????????.??????. ?????-?????【??】?????????: ???????????????:??????!?????!???:????、????、????、????。??,??????????!??????. ?????-?????【??】?????????: ???????????????????????,????,????“???、???、???”?????,?????,?????????????????。??????！ ?????-?????【??】?????????: ???????????????,??????,??????,??????、??????,??????、??，????，??????！ ?????-?????【??】?????????: ???????????????,??????,??????,??????、??????,??????、??，????，??????！ ?????-?????【??】?????????: ?????????????????????,??????,???????????,????????????????,????????.??????. ?????-?????【??】?????????: ??????????????,????????????,????????,???,???????????,????,????。?????,??????. ?????-?????【??】?????????: ???????????????:??????!?????!???:????、????、????、????。??,??????????!??????. ?????-?????【??】?????????: ???????????????,??????,??????,??????、??????,??????、??，????，??????！ ?????-?????【??】?????????: ????????????,????,?????、???、?????,???????,?????,???????????100%。??????！ ?????-?????【??】?????????: ???????2005?,????????????????????,??????????,??????。?????,???????????????????，??????！ ?????-?????【??】?????????: ???????????????????????,???????????,??????,??????????????...????????。??????！ ?????-?????【??】?????????: ???????????????????????,???????????,??????,??????????????...????????。??????！ ?????-?????【??】?????????: ??????????????????,???,??????????、???????????????????。??????,????、????，??????！ ?????-?????【??】?????????: ???????????????,??????,??????,??????、??????,??????、??，????，??????！ ?????-?????【??】?????????: ?????????????????????,??????,???????????,????????????????,????????.??????. ?????-?????【??】?????????: ???????????????????????,????,????“???、???、???”?????,?????,?????????????????。??????！ ?????-?????【??】?????????: ?????????????????????,??????,???????????,????????????????,????????.??????. ?????-?????【??】?????????: ?????1992?,????????????????。??????????????????????。????????????,????，????????！ ?????-?????【??】?????????: ??????、??????????????????,???????.??????????,????????。 ?????-?????【??】?????????: ????????????,????,?????、???、?????,???????,?????,???????????100%。??????！ ?????-?????【??】?????????: ????????,???????????,??????????,????:??,????,???????? ??????????,????????。??????！ ?????-?????【??】?????????: ??????????????,????????????,????????,???,???????????,????,????。?????,??????. ?????-?????【??】?????????: ???????2005?,????????????????????,??????????,??????。?????,???????????????????，??????！ ?????-?????【??】?????????: ???????????????????????,???????????,??????,??????????????...????????。??????！ ?????-?????【??】?????????: ???????????????????????,???????????,??????,??????????????...????????。??????！ ?????-?????【??】?????????: ???????????????,??????,??????,??????、??????,??????、??，????，??????！ ??????-??????【??】??????????: ?????????????????????,??????,???????????,????????????????,????????.??????. ?????-?????【??】?????????: ???????????????:??????!?????!???:????、????、????、????。??,??????????!??????. ??????-??????【??】??????????: ????????,???????????,??????????,????:??,????,???????? ??????????,????????。??????！ ?????-?????【??】?????????: ????????????,????,?????、???、?????,???????,?????,???????????100%。??????！ ?????-?????【???????????: ??????????????,????????????,????????,???,???????????,????,????。?????,??????. ?????-?????【??】?????????: ??????????????,????????????,????????,???,???????????,????,????。?????,??????. ?????-?????【??】?????????: ??????????????????,???,??????????、???????????????????。??????,????、????，??????！ ?????-?????【??】?????????: ???????????????????????,???????????,??????,??????????????...????????。??????！ ?????-?????【??】?????????: ????????????,????,?????、???、?????,???????,?????,???????????100%。??????！ ?????-?????【??】?????????: ?????1992?,????????????????。??????????????????????。????????????,????，????????！ ?????-?????【??】?????????: ??????、??????????????????,???????.??????????,????????。 ?????-?????【??】?????????: ???????2005?,????????????????????,??????????,??????。?????,???????????????????，??????！ ?????-?????【??】?????????: ?????????????????????,??????,???????????,????????????????,????????.??????. ?????-?????【??】?????????: ??????????????????,???,??????????、???????????????????。??????,????、????，??????！

  Read the article

• SSIS Dashboard v0.4

  - by Davide Mauri

  Following the post on SSISDB script on Gist, I’ve been working on a HTML5 SSIS Dashboard, in order to have a nice looking, user friendly and, most of all, useful, SSIS Dashboard. Since this is a “spare-time” project, I’ve decided to develop it using Python since it’s THE data language (R aside), it’s a beautiful & powerful, well established and well documented and with a rich ecosystem around. Plus it has full support in Visual Studio, through the amazing Python Tools For Visual Studio plugin, I decided also to use Flask, a very good micro-framework to create websites, and use the SB Admin 2.0 Bootstrap admin template, since I’m all but a Web Designer. The result is here: https://github.com/yorek/ssis-dashboard and I can say I’m pretty satisfied with the work done so far (I’ve worked on it for probably less than 24 hours). Though there’s some features I’d like to add in t future (historical execution time, some charts, connection with AzureML to do prediction on expected execution times) it’s already usable. Of course I’ve tested it only on my development machine, so check twice before putting it in production but, give the fact that, virtually, there is not installation needed (you only need to install Python), and that all queries are based on standard SSISDB objects, I expect no big problems. If you want to test, contribute and/or give feedback please fell free to do it…I would really love to see this little project become a community project! Enjoy!

  Read the article

• PHP MYSQL loop to check if LicenseID Values are contained in mysql DB [closed]

  - by Jasper

  I have some troubles to find the right loop to check if some values are contained in mysql DB. I'm making a software and I want to add license ID. Each user has x keys to use. Now when the user start the client, it invokes a PHP page that check if the Key sent in the POST method is stored in DB or not. If that key isn't store than I need to check the number of his keys. If it's than X I'll ban him otherwise i add the new keys in the DB. I'm new with PHP and MYSQL. I wrote this code and I would know if I can improve it. <?php $user = POST METHOD $licenseID = POST METHOD $resultLic= mysql_query("SELECT id , idUser , idLicense FROM license WHERE idUser = '$user'") or die(mysql_error()); $resultNumber = mysql_num_rows($resultLic); $keyFound = '0'; // If keyfound is 1 the key is stored in DB while ($rows = mysql_fetch_array($resultLic,MYSQL_BOTH)) { //this loop check if the $licenseID is stored in DB or not for($i=0; $i< $resultNumber ; i++) { if($rows['idLicense'] === $licenseID) { //Just for the debug echo("License Found"); $keyFound = '1'; break; } //If key isn't in DB and there are less than 3 keys the new key will be store in DB if($keyfound == '0' && $resultNumber < 3) { mysql_query( Update users set ...Store $licenseID in Table) } // Else mean that the user want user another generated key (from the client) in the DB and i will be ban (It's wrote in TOS terms that they cant use the software on more than 3 different station) else { mysql_query( update users set ban ='1'.....etc ); } } ?> I know that this code seems really bad so i would know how i can improve it. Someone Could give me any advice? I choose to have 2 tables: users where all information about the users is, with fields id, username, password and another table license with fields id, idUsername, idLicense (the last one store license that the software generate)

  Read the article

• Focus follows mouse stops working when opening window from launcher and no click to focus

  - by user97600

  This is 12.04 default desktop (unity). I set it to focus follows mouse, and changed the menus to be on the window. This worked for a while, then some unknown even, maybe an upgrade maybe some other setting change caused it to stop working. There are many ways for this behavior to start but one reliable one is to bring a window to the foreground/focus with the launcher. Now the focus is stuck on that window and not just the window but the regions within the window so the close, maximize, minimize and menus do not work. I have to use mouse middle and then mouse right and then focus follows mouse is restored for a bit. The exact details of the mouse action aren't clear, sometimes it seems like just mouse middle helps, sometimes just right some times a desperate sequence of clicks :-( I have tried switching to the gnome desktop and it seems to occur less there but it is not eliminated. I have tried switching mice to an old wired USB mouse. I have tried creating a new account and that has not worked. I have observed "split focus" where to scroll button scrolls one one window but the input goes to another. I go trapped recently where my keyboard input went to libre office calc, but I was selecting the search term in the chrome address window. The selection "grayed" but the keyboard input for the search went to libre. Regions in windows have very confused focus. I have to work hard to get focus on for example the close gliph (X) or the minimize gliph (_).

  Read the article

• B.S.in Computer Science, weak eyes => career change

  - by Prometheus

  So I am going to earn B.S. in Computer Science soon. I like computers. I like programming. The problem is that my eyes are very weak. Depending on their condition, I can only put in about 6 hours in front of computer a day. If I push myself, I have trouble even keeping my eyes open because of soreness/pain, consequently headaches. My eyes do not have medical conditions. I was just born with weak eyes. I tried many different approaches to work around this problem - better monitor, breaks every 10 minutes, supplements... I even memorized a lot of shortcuts to reduce my time on computers! But I am finally giving up. I do not think I can be a programmer for the rest of my life. I was the top of my class in high school because all works were paper-based, I did average in college due to the nature of my eyes and the difficulty of the material. So what do you recommend I do? Or, Is there a career that is similar to programming but requires interacting with computers less?

  Read the article

• Need help understanding XNA 4.0 BoundingBox vs BoundingSphere Intersection

  - by nerdherd

  I am new to both game programming and XNA, so I apologize if I'm missing a simple concept or something. I have created a simple 3D game with a player and a crate and I'm working on getting my collision detection working properly. Right now I am using a BoundingSphere for my player, and a BoundingBox for the crate. For some reason, XNA only detects a collision when my player's sphere touches the front face of the crate. I'm rendering all the BoundingSpheres and BoundingBoxes as wire frames so I can see what's going on, and everything visually appears to be correct, but I can't figure out this behavior. I have tried these checks: playerSphere.Intersects(crate.getBoundingBox()) playerSphere.Contains(crate.getBoundingBox(), ContainmentType.Intersects) playerSphere.Contains(crate.getBoundingBox()) != ContainmentType.Disjoint But they all seem to produce the same behavior (in other words, they are only true when I hit the front face of the crate). The interesting thing is that when I use a BoundingSphere for my crate the collision is detected as I would expect, but of course this makes the edges less accurate. Any thoughts or ideas? Have I missed something about how BoundingSpheres and BoundingBoxes compute their intersections? I'd be happy to post more code or screenshots to clarify if needed. Thanks!

  Read the article

• What Should You Look for In a CRM Demo?

  - by charles.knapp

  I have helped firms evaluate software demos and delivered demos in diverse industries such as manufacturing, healthcare, life sciences, and travel (to name just a few). Here are a few suggestions. First, which vendor has the best fit for your industry? Make sure that the vendor demo staff tell you clearly throughout the demo (not just in a passing comment), what portion of each business process and screen is standard, what has been configured, what has been custom coded, and what has been provided by a partner. If you don't keep asking, what you buy may be less useful than what you saw. This will lead to added (and unbudgeted) costs and time. Second, what are the roles of the primary users? What are their top-most needs, such as exception-oriented dashboards or rapid data entry? Can you get a demo for each key role, showing how the software fits a typical workday? Have the vendor repeatedly tell you what is standard, configured, custom coded, or provided by a partner. Third, how well does the demo balance ease of use with completeness of business processes? One common approach is to hide needed fields or steps that are of low visual value. Another approach is to focus heavily on a visually appealing capability, while downplaying the fit with your key business processes. Result: despite their business acumen, demo attendees may not focus adequately on gaps in business fit So, look for complete disclosure and complete CRM. To arrange a demo from Oracle, please visit http://www.oracle.com/crm.

  Read the article

• 10 Tech Products Ahead of Their Time [Video]

  - by Jason Fitzpatrick

  Sometimes a product just can’t help but be too far ahead of it’s time to be adopted. Check out these 10 products that had their moment of glory a moment (or a decade) too soon. At Mashable they’ve gathered up 10 products that hit the market too soon for people to really appreciate them. Among them, as seen in the video above, a super simple internet-focused computer. At the time it hit the market people simply didn’t get the value of having a cheap, easy to use internet terminal. It probably didn’t help much that the 1990s internet didn’t have the plethora of powerful and useful web-based applications we have now. None the less we now have tons of lightweight and “underpowered” devices focused on the internet experience (like netbooks, iPads, smart phones, chromebooks, and more). Hit up the link below to see the 9 other gems from their collection of products ahead of their times. 10 Tech Products Ahead of Their Time [Mashable] How to Make and Install an Electric Outlet in a Cabinet or DeskHow To Recover After Your Email Password Is CompromisedHow to Clean Your Filthy Keyboard in the Dishwasher (Without Ruining it)

  Read the article

• Agile Testing Days 2012 – Day 2 – Learn through disagreement

  - by Chris George

  I think I was in the right place! During Day 1 I kept on reading tweets about Lean Coffee that has happened earlier that morning. It intrigued me and I figured in for a penny in for a pound, and set my alarm for 6:45am. Following the award night the night before, it was _really_ hard getting up when it went off, but I did and after a very early breakfast, set off for the 10 min walk to the Dorint. With Lean Coffee due to start at 07:30, I arrived at the hotel and made my way to one of the hotel bars. I soon realised I was in the right place as although the bar was empty, there was a table with post-it’s and pens! This MUST be the place! The premise of Lean Coffee is to have several small timeboxed discussions. Everyone writes down what they would like to discuss on post-its that are then briefly explained and submitted to the pile. Once everyone is done, the group dot-votes on the topics. The topics are then sorted by the dot vote counts and the discussions begin. Each discussion had 8 mins to start with, which meant it prevented the discussions getting off topic too much. After the time elapsed, the group had a vote whether to extend the discussion by a further 4 mins or move on. Several discussion were had around training, soft skills etc. The conversations were really interesting and there were quite a few good ideas. Overall it was a very enjoyable experience, certainly worth the early start! Make Melly Happy Following Lean Coffee was real coffee, and much needed that was! The first keynote of the day was “Let’s help Melly (Changing Work into Life)”by Jurgen Appelo. Draw lines to track happiness This was a very interesting presentation, and set the day nicely. The theme to the keynote was projects are about the people, more-so than the actual tasks. So he started by showing a photo of an employee ‘Melly’ who looked happy enough. He then stated that she looked happy but actually hated her job. In fact 50% of Americans hate their jobs. He went on to say that the world over 50% of people hate Americans their jobs. Jurgen talked about many ways to reduce the feedback cycle, not only of the project, but of the people management. Ideas such as Happiness doors, happiness tracking (drawing lines on a wall indicating your happiness for that day), kudo boxes (to compliment a colleague for good work). All of these (and more) ideas stimulate conversation amongst the team, lead to early detection of issues and investigation of solutions. I’ve massively simplified Jurgen’s keynote and have certainly not done it justice, so I will post a link to the video once it’s available. Following more coffee, the next talk was “How releasing faster changes testing” by Alexander Schwartz. This is a topic very close to our hearts at the moment, so I was eager to find out any juicy morsels that could help us achieve more frequent releases, and Alex did not disappoint. He started off by confirming something that I have been a firm believer in for a number of years now; adding more people can do more harm than good when trying to release. This is for a number of reasons, but just adding new people to a team at such a critical time can be more of a drain on resources than they add. The alternative is to have the whole team have shared responsibility for faster delivery. So the whole team is responsible for quality and testing. Obviously you will have the test engineers on the project who have the specialist skills, but there is no reason that the entire team cannot do exploratory testing on the product. This links nicely with the Developer Exploratory testing presented by Sigge on Day 1, and certainly something that my team are really striving towards. Focus on cycle time, so what can be done to reduce the time between dev cycles, release cycles. What’s stops a release, what delays a release? all good solid questions that can be answered. Alex suggested that perhaps the product doesn’t need to be fully tested. Doing less testing will reduce the cycle time therefore get the release out faster. He suggested a risk-based approach to planning what testing needs to happen. Reducing testing could have an impact on revenue if it causes harm to customers, so test the ‘right stuff’! Determine a set of tests that are ‘face saving’ or ‘smoke’ tests. These tests cover the core functionality of the product and aim to prevent major embarrassment if these areas were to fail! Amongst many other very good points, Alex suggested that a good approach would be to release after every new feature is added. So do a bit of work -> release, do some more work -> release. By releasing small increments of work, the impact on the customer of bugs being introduced is reduced. Red Pill, Blue Pill The second keynote of the day was “Adaptation and improvisation – but your weakness is not your technique” by Markus Gartner and proved to be another very good presentation. It started off quoting lines from the Matrix which relate to adapting, improvising, realisation and mastery. It has alot of nerds in the room smiling! Markus went on to explain how through deliberate practice ( and a lot of it!) you can achieve mastery, but then you never stop learning. Through methods such as code retreats, testing dojos, workshops you can continually improve and learn. The code retreat idea was one that interested me. It involved pairing to write an automated test for, say, 45 mins, they deleting all the code, finding a different partner and writing the same test again! This is another keynote where the video will speak louder than anything I can write here! Markus did elaborate on something that Lisa and Janet had touched on yesterday whilst busting the myth that “Testers Must Code”. Whilst it is true that to be a tester, you don’t need to code, it is becoming more common that there is this crossover happening where more testers are coding and more programmers are testing. Markus made a special distinction between programmers and developers as testers develop tests code so this helped to make that clear. “Extending Continuous Integration and TDD with Continuous Testing” by Jason Ayers was my next talk after lunch. We already do CI and a bit of TDD on my project team so I was interested to see what this continuous testing thing was all about and whether it would actually work for us. At the start of the presentation I was of the opinion that it just would not work for us because our tests are too slow, and that would be the case for many people. Jason started off by setting the scene and saying that those doing TDD spend between 10-15% of their time waiting for tests to run. This can be reduced by testing less often, reducing the test time but this then increases the risk of introduced bugs not being spotted quickly. Therefore, in comes Continuous Testing (CT). CT systems run your unit tests whenever you save some code and runs them in the background so you can continue working. This is a really nice idea, but to do this, your tests must be fast, independent and reliable. The latter two should be the case anyway, and the first is ideal, but hard! Jason makes several suggestions to make tests fast. Firstly keep the scope of the test small, secondly spin off any expensive tests into a suite which is run, perhaps, overnight or outside of the CT system at any rate. So this started to change my mind, perhaps we could re-engineer our tests, and continuously run the quick ones to give an element of coverage. This talk was very interesting and I’ve already tried a couple of the tools mentioned on our product (Mighty Moose and NCrunch). Sadly due to the way our solution is built, it currently doesn’t work, but we will look at whether we can make this work because this has the potential to be a mini-game-changer for us. Using the wrong data Gojko’s Hierarchy of Quality The final keynote of the day was “Reinventing software quality” by Gojko Adzic. He opened the talk with the statement “We’ve got quality wrong because we are using the wrong data”! Gojko then went on to explain that we should judge a bug by whether the customer cares about it, not by whether we think it’s important. Why spend time fixing issues that the customer just wouldn’t care about and releasing months later because of this? Surely it’s better to release now and get customer feedback? This was another reference to the idea of how it’s better to build the right thing wrong than the wrong thing right. Get feedback early to make sure you’re making the right thing. Gojko then showed something which was very analogous to Maslow’s heirachy of needs. Successful – does it contribute to the business? Useful – does it do what the user wants Usable – does it do what it’s supposed to without breaking Performant/Secure – is it secure/is the performance acceptable Deployable Functionally ok – can it be deployed without breaking? He then explained that User Stories should focus on change. In other words they should focus on the users needs, not the users process. Describe what the change will be, how that change will happen then measure it! Networking and Beer Following the day’s closing keynote, there were drinks and nibble for the ‘Networking’ evening. This was a great opportunity to talk to people. I find approaching strangers very uncomfortable but once again, when in Rome! Pete Walen and I had a long conversation about only fixing issues that the customer cares about versus fixing issues that make you proud of your software! Without saying much, and asking the right questions, Pete made me re-evaluate my thoughts on the matter. Clever, very clever!  Oh and he ‘bought’ me a beer! My Takeaway Triple from Day 2: release small and release often to minimize issues creeping in and get faster feedback from ‘the real world’ Focus on issues that the customers care about, not what we think is important It’s okay to disagree with someone, even if they are well respected agile testing gurus, that’s how discussion and learning happens!  

  Read the article

• sublime text 2 review !

  - by Anirudha

  Few months ago I am looking for a editor to doing simply edit on html,css,javascript.  Before it I tried notepad++ which is quite awesome to do all works I want to get done with him.  I choose 2 editor on my list. first is sublime text and second is phpstorm. both are cross-plateform. I tried both and both is working fine. I finally go with sublime text 2.   Here is the reason why sublime text 2 is awesome. phpstorm and sublime text 2 both is licensed  software. In sublime text 2 you can use it for unlimited time when phpstorm is available for 30 days only. Sublime text 2 is very memory efficient and lightweight software this is first thing people found best in sublime text 2. in phpstorm problem for me is sometime it’s goes unresponsive when I tried html5 boilerplate. sublime text 2 is never hang depend on memory size of project compare to phpstorm. in Sublime text 2 you can got better speed at coding after learning some shortcut and basic thing applied specially sublime text 2. Sublime text 2 come with distraction free mode when phpstorm have nothing with full-screen. Sublime text 2 support almost every language. I have seen many people in community who has move from their PHP IDE to sublime text 2. You can use LESS and coffeescript in it. There are many kind of customization out in github regarding sublime text 2.   In past I also have also tried webmatrix. the latest version of webmatrix have nothing good as sublime text 2. Sublime text 2 is best fit for my requirement.   So cheers, people should tried once Sublime text 2 if they are look for a solid tool for learning new things. sublime text 2 can be downloaded from http://www.sublimetext.com/.   Thanks for reading my post.

  Read the article

• KERPOOOOW!

  - by Matt Christian

  Recently I discovered the colorful world of comic books.  In the past I've read comics a few times but never really got into them.  When I wanted to start a collection I decided either video games or comics yet stayed away from comics because I am less familiar with them. In any case, I stopped by my local comic shop and picked up a few comics and a few trade paperbacks.  After reading them and understanding their basic flow I began to enjoy not only the stories but the art styles hiding behind those little white bubbles of text (well, they're USUALLY white).  My first stop at the comic store I ended up with: - Nemesis #1 (cover A) - Shuddertown #1 (cover A I think) - Daredevil: King of Hell's Kitchen Trade Paperback - Peter Parker: Spiderman - One Small Break Trade Paperback It took me about 3-4 days to read all of that including re-reading the single issues and glancing over the beginning of Daredevil again.  After a week of looking around online I knew a little more about the comics I wanted to pick up and the kind of art style I enjoyed.  While Peter Parker: Spiderman was ok, I really enjoyed the detailed, realistic look of Daredevil and Shuddertown. Now, a few years back I picked up the game The Darkness for PS3.  I knew it was based off a comic but never read the comic.  I decided I'd pick up a few issues of it and ended up with: - The Darkness #80 (cover A) - The Darkness #81 (cover A) - The Darkness #82 (cover A) - The Darkness #83 (cover A) - The Darkness Shadows and Flame #1  (one-shot; cover A) - The Darkness Origins: Volume 1 Trade Paperback (contains The Darkness #1-6) - New Age boards and bags for storing my comics The Darkness is relatively good though jumping from issue #6 to issue #80 I lost a bit on who the enemy in the current series is.  I think out of all of them, issue #83 was my favorite of them. I'm signed up at the local shop to continue getting Nemesis, The Darkness, and Shuddertown, and I'll probably pick up a few different ones this weekend...

  Read the article

• Kent .Net/SqlServer User Group – Upcoming events

  - by Dave Ballantyne

  At the Kent user group we have two upcoming events.  Both are to be held at F-Keys Training suite http://f-keys.co.uk/ in Rochester, Kent. If you haven’t attended before please note the location here. 14-June Is your code S.O.L.I.D ? Nathan Gloyn Everybody keeps on about SOLID principles but what are they? and why should you care? This session is an introduction to SOLID and I'll aim to walk through each principle telling you about that principle and then show how a code base can be refactored using the principles to make your life easier, Come the end of the session you should have a basic understanding of the principle, why to use it and how using it can improve your code. Building composite applications with OpenRasta 3 Sebastien Lambla A wave of change is coming to Web development on .NET. Packaging technologies are bringing dependency management to .NET for the first time, streamlining development workflow and creating new possibilities for deployment and administration. The sky's the limit, and in this session we'll explore how open frameworks can help us leverage composition for the web. Register here for this event http://www.eventbrite.com/event/1643797643 05-July Tony Rogerson Achieving a throughput of 1.5Terabytes or over 92,000 8Kbyte of 100% random reads per second on kit costing less that 2.5K, and of course what to do with it! The session will focus on commodity kit and how it can be used within business to provide massive performance benefits at little cost. End to End Report Creation and Management using SQL Server Reporting Services  Chris Testa-O'NeillThis session will walk through the authoring, management and delivery of reports with a focus on the new features of Reporting Services 2008 R2. At the end of this session you will understand how to create a report in the new report designer. Be aware of the Report management options available and the delivery mechanisms that can be used to deliver reports. Register here for this event http://www.eventbrite.com/event/1643805667 Hope to see you at one or other ( or even both if you are that way inclined).

  Read the article

• Designing configuration for subobjects

  - by Stefano Borini

  I have the following situation: I have a class (let's call it Main) encapsulating a complex process. This class in turn orchestrates a sequence of subalgorithms (AlgoA, AlgoB), each one represented by an individual class. To configure Main, I have a configuration stored into a configuration object MainConfig. This object contains all the config information for AlgoA and AlgoB with their specific parameters. AlgoA has no interest to the information relative to the configuration of AlgoB, so technically I could have (and in practice I have) a contained MainConfig.AlgoAConfig and MainConfig.AlgoBConfig instances, and initialize as AlgoA(MainConfig.AlgoAConfig) and AlgoB(MainConfig.AlgoBConfig). The problem is that there is some common configuration data. One example is the printLevel. I currently have MainConfig.printLevel. I need to propagate this information to both AlgoA and AlgoB, because they have to know how much to print. MainConfig also needs to know how much to print. So the solutions available are I pass the MainConfig to AlgoA and AlgoB. This way, AlgoA has technically access to the whole configuration (even that of AlgoB) and is less self-contained I copy the MainConfig.printLevel into AlgoAConfig and AlgoBConfig, so I basically have three printLevel information repeated. I create a third configuration class PrintingConfig. I have an instance variable MainConfig.printingConfig, and then pass to AlgoA both MainConfig.AlgoAConfig and MainConfig.printingConfig. Have you ever found this situation? How did you solve it ? Which one is stylistically clearer to a new reader of the code ?

  Read the article

• What are the pros and cons about developing under MAC OS? [closed]

  - by user827992

  Sometimes i get the chance to program under MAC OS, i knew about this OS since Apple shipped its computers with a PowerPC by Motorola ( since Panther, more or less ), these days they are all X86 and i see no particular advantages about adopting this platform, also i see only downsides for the main part, i do not want to cause flames, please reply if you have a good answer or you can contribute in some constructive way. I'm trying to write a list of the natively supported languages, or the languages that comes only under MAC OS with some particular technology, my list is this: Objective C with Cocoa/Carbon I'm not considering personal preferences here, if a person X likes to code under Xcode it's probably ok to have a MAC, if a person Y likes to code under Visual Studio it's probably ok to not having a MAC, my purpose is to clarify what MAC OS is good for. I also do not get why people glorify the MAC for historical reasons, I mean a language like Java just comes for MAC only in the 7th edition of its JDK, things like GCC are just a porting and many technologies are out of the question like C# ( I'm sorry, i do not consider MonoDevelop like a serious alternative ) , .Net, ASP, DirectX, and many others are just, again, porting or free software, like PHP, MySQL, Javascript, XML, CSS, OpenGL, etc etc. My question is: what is so special about being a programmer under MAC OS? There is something that I have not seen? I also noticed that a significant portion of MAC users end up using their MAC like a normal Windows PC with Parallels or something like that. I can afford to buy a MAC, show me why this machine is so unique.

  Read the article

• Libgdx actor bounds are wrong

  - by Undume

  The Actor's boundaries are not centered at the ButtonText but I used the setBounds() method. The higher the Y position is, the less centered is the boundary. The weird thing is that i only created and added to the Stage one button but the screen shows two. When i click the top button, the bottom one is the one highlighted. How can i fix that? import com.badlogic.gdx.Game; import com.badlogic.gdx.Gdx; import com.badlogic.gdx.files.FileHandle; import com.badlogic.gdx.scenes.scene2d.Stage; import com.badlogic.gdx.scenes.scene2d.ui.Skin; import com.badlogic.gdx.scenes.scene2d.ui.TextButton; public class MyGame extends Game { Stage stage; @Override public void create() { stage=new Stage(); FileHandle skinFile = new FileHandle("data/resources/uiskin/uiskin.json"); Skin skin = new Skin(skinFile); TextButton sas=new TextButton("dd",skin); sas.setBounds(0, 500, 100, 100); stage.addActor(sas); Gdx.input.setInputProcessor(stage); } @Override public void dispose() { super.dispose(); } @Override public void render() { super.render(); stage.act(Gdx.graphics.getDeltaTime()); stage.draw(); } @Override public void resize(int width, int height) { super.resize(width, height); } @Override public void pause() { super.pause(); } @Override public void resume() { super.resume(); } }

  Read the article

• The problems with Avoiding Smurf Naming classes with namespaces

  - by Daniel Koverman

  I pulled the term smurf naming from here (number 21). To save anyone not familiar the trouble, Smurf naming is the act of prefixing a bunch of related classes, variables, etc with a common prefix so you end up with "a SmurfAccountView passes a SmurfAccountDTO to the SmurfAccountController", etc. The solution I've generally heard to this is to make a smurf namespace and drop the smurf prefixes. This has generally served me well, but I'm running into two problems. I'm working with a library with a Configuration class. It could have been called WartmongerConfiguration but it's in the Wartmonger namespace, so it's just called Configuration. I likewise have a Configuration class which could be called SmurfConfiguration, but it is in the Smurf namespace so that would be redundant. There are places in my code where Smurf.Configuration appears alongside Wartmonger.Configuration and typing out fully qualified names is clunky and makes the code less readable. It would be nicer to deal with a SmurfConfiguration and (if it was my code and not a library) WartmongerConfiguration. I have a class called Service in my Smurf namespace which could have been called SmurfService. Service is a facade on top of a complex Smurf library which runs Smurf jobs. SmurfService seems like a better name because Service without the Smurf prefix is so incredibly generic. I can accept that SmurfService was already a generic, useless name and taking away smurf merely made this more apparent. But it could have been named Runner, Launcher, etc and it would still "feel better" to me as SmurfLauncher because I don't know what a Launcher does, but I know what a SmurfLauncher does. You could argue that what a Smurf.Launcher does should be just as apparent as a Smurf.SmurfLauncher, but I could see `Smurf.Launcher being some kind of class related to setup rather than a class that launches smurfs. If there is an open and shut way to deal with either of these that would be great. If not, what are some common practices to mitigate their annoyance?

  Read the article

• How should Code Review be Carried Out?

  - by Graviton

  My previous question has to do with how to advance code review among the developers. Here I am interested in how the code review session should be carried out, so that both the reviewer and reviewed are feeling comfortable about it. I have done some code review before, but the experience sucks big time. My previous manager would come to us-- on an ad hoc basis-- and tell us to explain our code to him. Since he wasn't very familiar with the code base, I spent a huge amount of times explaining just the most basic structure of my code to him. This took a long time and by the time we were done, we were both exhausted. Then he would raise issues with my code. Most issues he raised were cosmetic in nature ( e.g, don't use region for this code block, change the variable name from xxx to yyy even though the later makes even less sense, and so on). We did this a few rounds, and the review session didn't derive much benefits for us, and we stopped. What do you have to do, in order to make code review a natural, enjoyable, thought stimulating, bug-fixing and mutual-learning experience?

  Read the article

• Gmail Doesn't Like My Cron

  - by Robery Stackhouse

  You might wonder what *nix administration has to do with maker culture. Plenty, if *nix is your automation platform of choice. I am using Ubuntu, Exim, and Ruby as the supporting cast of characters for my reminder service. Being able to send yourself an email with some data or a link at a pre-selected time is a pretty handy thing to be able to do indeed. Works great for jogging my less-than-great memory. http://www.linuxsa.org.au/tips/time.html http://forum.slicehost.com/comments.php?DiscussionID=402&page=1 http://articles.slicehost.com/2007/10/24/creating-a-reverse-dns-record http://forum.slicehost.com/comments.php?DiscussionID=1900 http://www.cyberciti.biz/faq/how-to-test-or-check-reverse-dns/ After going on a huge round the world wild goose chase, I finally was told by someone on the exim-users list that my IP was in a range blocked by Spamhaus PBL. Google said I need an SPF record http://articles.slicehost.com/2008/8/8/email-setting-a-sender-policy-framework-spf-record http://old.openspf.org/wizard.html http://www.kitterman.com/spf/validate.html The version of Exim that I could get from the Ubuntu package manager didn't support DKIM. So I uninstalled Exim and installed Postfix https://help.ubuntu.com/community/UbuntuTime http://www.sendmail.org/dkim/checker

  Read the article

• ArchBeat Link-o-Rama for 11/18/2011

  - by Bob Rhubart

  IT executives taking lead role with both private and public cloud projects: survey | Joe McKendrick "The survey, conducted among members of the Independent Oracle Users Group, found that both private and public cloud adoption are up—30% of respondents report having limited-to-large-scale private clouds, up from 24% only a year ago. Another 25% are either piloting or considering private cloud projects. Public cloud services are also being adopted for their enterprises by more than one out of five respondents." - Joe McKendrick SOA all the Time; Architects in AZ; Clearing Info Integration Hurdles This week on the Architect Home Page on OTN. OIM 11g OID (LDAP) Groups Request-Based Provisioning with custom approval – Part I | Alex Lopez Iin part one of a two-part blog post, Alex Lopez illustrates "an implementation of a Custom Approval process and a Custom UI based on ADF to request entitlements for users which in turn will be converted to Group memberships in OID." ArchBeat Podcast Information Integration - Part 3/3 "Oracle Information Integration, Migration, and Consolidation" author Jason Williamson, co-author Tom Laszeski, and book contributor Marc Hebert talk about upcoming projects and about what they've learned in writing their book. InfoQ: Enterprise Shared Services and the Cloud | Ganesh Prasad As an industry, we have converged onto a standard three-layered service model (IaaS, PaaS, SaaS) to describe cloud computing, with each layer defined in terms of the operational control capabilities it offers. This is unlike enterprise shared services, which have unique characteristics around ownership, funding and operations, and they span SaaS and PaaS layers. Ganesh Prasad explores the differences. Stress Testing Oracle ADF BC Applications - Do Connection Pooling and TXN Disconnect Level Oracle ACE Director Andrejus Baranovskis describes "how jbo.doconnectionpooling = true and jbo.txn.disconnect_level = 1 properties affect ADF application performance." Exploring TCP throughput with DTrace | Alan Maguire "According to the theory," says Maguire, "when the number of unacknowledged bytes for the connection is less than the receive window of the peer, the path bandwidth is the limiting factor for throughput."

  Read the article

• CodePlex Daily Summary for Wednesday, March 28, 2012

  CodePlex Daily Summary for Wednesday, March 28, 2012Popular Releasescallisto: callisto 2.0.22: Patched update contains new option to enable or disable file sharing.JSON Toolkit: JSON Toolkit 3.1: slight performance improvement (5% - 10%) new JsonException classSPSiteInstaller: SPSiteInstaller v1.3: Now you can upgrade your existing structure, just use ./remsolns ./addsolns ./createpages ./addwebparts as per your requirements, i.e. after adding more pages/webparts etc to the siteconfig.xml, you can now rerun the above as many times as you want, if a page already exists, it will be skipped, if a webpart is already on a page, it wont be added again.Picturethrill: Version 2.3.28.0: Straightforward image selection. New clean UI look. Super stable. Simplified user experience.Indent Guides for Visual Studio: Indent Guides v12 (beta 2): Note This beta is likely to be less stable than the previous one. If you have severe troubles using this version, please report them with as much detail as possible (especially other extensions/addins that you may have) and downgrade to the last stable release. Version History Changed since v12 (beta 1): new options dialog with Quick Set selections for behavior restructured settings storage (should be more reliable) asynchronous background document analysis glow effect now appears in p...SQL Monitor - managing sql server performance: SQL Monitor 4.2 alpha 16: 1. finally fixed problem with logic fault checking for temporary table name... I really mean finally ...ScintillaNET: ScintillaNET 2.5: A slew of bug-fixes with a few new features sprinkled in. This release also upgrades the SciLexer and SciLexer64 DLLs to version 3.0.4. The official stuff: Issue # Title 32402 32402 27137 27137 31548 31548 30179 30179 24932 24932 29701 29701 31238 31238 26875 26875 30052 30052 Mugen MVVM Toolkit: Mugen MVVM Toolkit ver 1.1: Added Design mode support.Multiwfn: Multiwfn 2.3.2: Multiwfn 2.3.2Harness: Harness 2.0.2: change to .NET Framework Client Profile bug fix the download dialog auto answer. bug fix setFocus command. add "SendKeys" command. remove "closeAll" command. minor bugs fixed.BugNET Issue Tracker: BugNET 0.9.161: Below is a list of fixes in this release. Bug BGN-2092 - Link in Email "visit your profile" not functional BGN-2083 - Manager of bugnet can not edit project when it is not public BGN-2080 - clicking on a link in the project summary causes error (0.9.152.0) BGN-2070 - Missing Functionality On Feed.aspx BGN-2069 - Calendar View does not work BGN-2068 - Time tracking totals not ok BGN-2067 - Issues List Page Size Bug: Index was out of range. Must be non-negative and less than the si...YAF.NET (aka Yet Another Forum.NET): v1.9.6.1 RTW: v1.9.6.1 FINAL is .NET v4.0 ONLY v1.9.6.1 has: Performance Improvements .NET v4.0 improvements Improved FaceBook Integration KNOWN ISSUES WITH THIS RELEASE: ON INSTALL PLEASE DON'T CHECK "Upgrade BBCode Extensions...". More complete change list and discussion here: http://forum.yetanotherforum.net/yaf_postst14201_v1-9-6-1-RTW-Dated--3-26-2012.aspxQuick Performance Monitor: Version 1.8.1: Added option to set main window to be 'Always On Top'. Use context (right-click) menu on graph to toggle.Asp.NET Url Router: v1.0: build for .net 2.0 and .net 4.0menu4web: menu4web 0.0.3: menu4web 0.0.3ArcGIS Editor for OpenStreetMap: ArcGIS Editor for OSM 2.0 Final: This release installs both the ArcGIS Editor for OSM Server Component and/or ArcGIS Editor for OSM Desktop components. The Desktop tools allow you to download data from the OpenStreetMap servers and store it locally in a geodatabase. You can then use the familiar editing environment of ArcGIS Desktop to create, modify, or delete data. Once you are done editing, you can post back the edit changes to OSM to make them available to all OSM users. The Server Component allows you to quickly create...Craig's Utility Library: Craig's Utility Library 3.1: This update adds about 60 new extension methods, a couple of new classes, and a number of fixes including: Additions Added DateSpan class Added GenericDelimited class Random additions Added static thread friendly version of Random.Next called ThreadSafeNext. AOP Manager additions Added Destroy function to AOPManager (clears out all data so system can be recreated. Really only useful for testing...) ORM additions Added PagedCommand and PageCount functions to ObjectBaseClass (same as M...DotSpatial: DotSpatial 1.1: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components are available as NuGet pa...Microsoft All-In-One Code Framework - a centralized code sample library: C++, .NET Coding Guideline: Microsoft All-In-One Code Framework Coding Guideline This document describes the coding style guideline for native C++ and .NET (C# and VB.NET) programming used by the Microsoft All-In-One Code Framework project team.WebDAV for WHS: Version 1.0.67: - Added: Check whether the Remote Web Access is turned on or not; - Added: Check for Add-In updates;New Projects.NET File Cache: FileCache is a concrete implementation of the .Net Framework 4's System.Runtime.Caching.ObjectCache that uses the local filesystem as the target location.ASP.NET MVC / Web API / Web Pages: This is the source code repository for open source ASP.NET products. The products include MVC, Web API and Web Pages with Razor.AudioManager in XNA: This project shows how to create an audio engine in xna. The audio engine support xna's simple audio libraries and XACT, The project is written using xna 4.0, c# programming language and the Visual Studio IDE.CLab: CLabDominorder: A multi-agent simulation of dominoes (the agents) that are placed in a random order on a board and then try to form some kind of ordering. (Used for evaluating the MASON framework) -all in java- Easy Eject: Easy Eject lets you eject USB drives quickly. Excel File Cleaner: This tool is designed to reduce the size and speed up Excel 2007/2010 workbooks. It will only work for the new XML File formats (XLSX and XLSM). It cleans the files by reducing the number of styles in use and the number of activated cells. See Microsoft KBs: KB213904 & KB244435.ForumMVC: the forum site use MVCFreshbooks.NET: C# Client Library to use the Freshbooks APIFrogger 3D: FROGGER 3D GAME: 3D remake of the classic Konami game: you have to help 5 frogs to reach their respective holes passing over a street full of cars and a river where you can only use trunks and waterlily to pass-by without drowning. Levels: the numbers of levels is potentially infinite, even if you will find levels over the 15th almost undoable... Note: Some third parties code & models have been used in the game, all rights reserved to respective owners... Project made for XNA exam of M...Gestione11: Management Software created with LightswitchIntel: The Dungeon of Doom: A text based RPG, mostly being done to learn C++. This summary will be expanded as the project is completed.ketabresan: ketabresan is an online book delivery projectKinect anti theft: Kinect anti theft application. It uses the capturemylog to save datas.Komon: enterprise framework targeting datadriven systemslocal.angle API: The local.angle API makes it easier for developers using .Net to integrate with the local.angle group of community websites.MessageTel: It`s a simple app for forward phone number You can download it from ZuneMarketplace for free. Just search "MessageTel"Modularity: Create modules for asp.net using a base class that helps you subscribe to application events easier than before and in a unit testable manner.MongoLP - A LinqPad Driver: A MongoDB LinqPad driver that uses the official C# driver from 10gen.MvcApplicationTeste: Projeto testeNokia Developer Days - Windows Phone: Nokia Developer Days - Windows PhoneOrchard Inline Editing: An implementation of inline editing for Orchard CMS, this version currently takes advantage of fluid infusion.Paulo FPU: Projeto exemplo.PES Championship Control: Projeto open-source que visa criar um aplicativo desktop/web para controle de um campeonato de pro-evolution soccer.projectforgit: projectforgitQuickbookWorkers: Hello!SharpUpdater: Auto-updater for Windows Desktop applicatons.SovoktvAPI: Library for Sovoktv REST APIStyleRepair: A tool that will automatically fix certain StyleCop warnings. Tool is based on StyleCopFixer with added functionality and will be hosted at http://stylerepair.codeplex.com This tool is still in development and more warnings will be added soon. Rules 1200-1207 are fixed using NArrange with optional regions. The tool allows for fixing multiple warnings at once, however, it is best at this point to fix groups of only the same warning number at once as warnings are not fixed in any pa...SWCustomRibbon: Create your custom Ribbon Tab, Groups and Buttons! So you can add your favourite links to the Ribbon menu quite easy.Theme Override Orchard module: This Orchard module adds configuration to the admin page that lets override the styling of the current theme (works with tenants too).txresearch: Research ProjectsUnity AutoRegisterExtension: This project is unity container extension that is attribute base register.Visual Localizer: Visual Localizer is an opensource plugin for Visual Studio 2008 and 2010. It makes localizing of completed C# projects much easier by providing such functions as automatic string-lookup, advanced work with ResX files etc.Vodigi Open Source Interactive Digital Signage: Vodigi is a free, open source, interactive digital signage software solution that offers all the features you need to promote and advertise your products and services. With Vodigi, you can have a virtual sales team dedicated to promoting and advertising your products and services... a team that knows your products and services inside and out, can provide detailed interactive information about your products and services, and is available any time... day or night... to help you succeed. ...WishProject: WishProject é um projeto voltado para estudos dos frameworks wicket, Spring e HibernateWP7PUBLISH: WP7PUBLISH is a framework for building content delivery system applications.WtCHJqueryPlugins: WtCHJqueryPluginsYouTube API Class & Server Control for ASP.NET 4.0: This project have option to use YouTube API easily into your asp.net application using the simple dll file. Also you can display YouTube Videos in your website using Server Control simply.

  Read the article

< Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >