Search Results

Search found 8591 results on 344 pages for 'mod cache'.

Page 138/344 | < Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >

  • FreeBSD 8.1 unstable network connection

    - by frankcheong
    I have three FreeBSD 8.1 running on three different hardware and therefore consist of different network adapter as well (bce, bge and igb). I found that the network connection is kind of unstable which I have tried to scp some 10MB file and found that I cannot always get the files completed successfully. I have further checked with my network admin and he claim that the problem is being caused by the network driver which cannot support the load whereby he tried to ping using huge packet size (around 15k) and my server will drop packet consistently at a regular interval. I found that this statement may not be valid since the three server is using three different network drive and it would be quite impossible that the same problem is being caused by three different network adapter and thus different network driver. Since then I have tried to tune up the performance by playing around with the /etc/sysctl.conf figures with no luck. kern.ipc.somaxconn=1024 kern.ipc.shmall=3276800 kern.ipc.shmmax=1638400000 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # Required by pf net.inet.ip.forwarding=1 #Network Performance Tuning kern.ipc.maxsockbuf=16777216 net.inet.tcp.rfc1323=1 net.inet.tcp.sendbuf_max=16777216 net.inet.tcp.recvbuf_max=16777216 # Setting specifically for 1 or even 10Gbps network net.local.stream.sendspace=262144 net.local.stream.recvspace=262144 net.inet.tcp.local_slowstart_flightsize=10 net.inet.tcp.nolocaltimewait=1 net.inet.tcp.mssdflt=1460 net.inet.tcp.sendbuf_auto=1 net.inet.tcp.sendbuf_inc=16384 net.inet.tcp.recvbuf_auto=1 net.inet.tcp.recvbuf_inc=524288 net.inet.tcp.sendspace=262144 net.inet.tcp.recvspace=262144 net.inet.udp.recvspace=262144 kern.ipc.maxsockbuf=16777216 kern.ipc.nmbclusters=32768 net.inet.tcp.delayed_ack=1 net.inet.tcp.delacktime=100 net.inet.tcp.slowstart_flightsize=179 net.inet.tcp.inflight.enable=1 net.inet.tcp.inflight.min=6144 # Reduce the cache size of slow start connection net.inet.tcp.hostcache.expire=1 Our network admin also claim that they see quite a lot of network up and down from their cisco switch log while I cannot find any up down message inside the dmesg. Have further checked the netstat -s but dont have concrete idea. tcp: 133695291 packets sent 39408539 data packets (3358837321 bytes) 61868 data packets (89472844 bytes) retransmitted 24 data packets unnecessarily retransmitted 0 resends initiated by MTU discovery 50756141 ack-only packets (2148 delayed) 0 URG only packets 0 window probe packets 4372385 window update packets 39781869 control packets 134898031 packets received 72339403 acks (for 3357601899 bytes) 190712 duplicate acks 0 acks for unsent data 59339201 packets (3647021974 bytes) received in-sequence 114 completely duplicate packets (135202 bytes) 27 old duplicate packets 0 packets with some dup. data (0 bytes duped) 42090 out-of-order packets (60817889 bytes) 0 packets (0 bytes) of data after window 0 window probes 3953896 window update packets 64181 packets received after close 0 discarded for bad checksums 0 discarded for bad header offset fields 0 discarded because packet too short 45192 discarded due to memory problems 19945391 connection requests 1323420 connection accepts 0 bad connection attempts 0 listen queue overflows 0 ignored RSTs in the windows 21133581 connections established (including accepts) 21268724 connections closed (including 32737 drops) 207874 connections updated cached RTT on close 207874 connections updated cached RTT variance on close 132439 connections updated cached ssthresh on close 42392 embryonic connections dropped 72339338 segments updated rtt (of 69477829 attempts) 390871 retransmit timeouts 0 connections dropped by rexmit timeout 0 persist timeouts 0 connections dropped by persist timeout 0 Connections (fin_wait_2) dropped because of timeout 13990 keepalive timeouts 2 keepalive probes sent 13988 connections dropped by keepalive 173044 correct ACK header predictions 36947371 correct data packet header predictions 1323420 syncache entries added 0 retransmitted 0 dupsyn 0 dropped 1323420 completed 0 bucket overflow 0 cache overflow 0 reset 0 stale 0 aborted 0 badack 0 unreach 0 zone failures 1323420 cookies sent 0 cookies received 1864 SACK recovery episodes 18005 segment rexmits in SACK recovery episodes 26066896 byte rexmits in SACK recovery episodes 147327 SACK options (SACK blocks) received 87473 SACK options (SACK blocks) sent 0 SACK scoreboard overflow 0 packets with ECN CE bit set 0 packets with ECN ECT(0) bit set 0 packets with ECN ECT(1) bit set 0 successful ECN handshakes 0 times ECN reduced the congestion window udp: 5141258 datagrams received 0 with incomplete header 0 with bad data length field 0 with bad checksum 1 with no checksum 0 dropped due to no socket 129616 broadcast/multicast datagrams undelivered 0 dropped due to full socket buffers 0 not for hashed pcb 5011642 delivered 5016050 datagrams output 0 times multicast source filter matched sctp: 0 input packets 0 datagrams 0 packets that had data 0 input SACK chunks 0 input DATA chunks 0 duplicate DATA chunks 0 input HB chunks 0 HB-ACK chunks 0 input ECNE chunks 0 input AUTH chunks 0 chunks missing AUTH 0 invalid HMAC ids received 0 invalid secret ids received 0 auth failed 0 fast path receives all one chunk 0 fast path multi-part data 0 output packets 0 output SACKs 0 output DATA chunks 0 retransmitted DATA chunks 0 fast retransmitted DATA chunks 0 FR's that happened more than once to same chunk 0 intput HB chunks 0 output ECNE chunks 0 output AUTH chunks 0 ip_output error counter Packet drop statistics: 0 from middle box 0 from end host 0 with data 0 non-data, non-endhost 0 non-endhost, bandwidth rep only 0 not enough for chunk header 0 not enough data to confirm 0 where process_chunk_drop said break 0 failed to find TSN 0 attempt reverse TSN lookup 0 e-host confirms zero-rwnd 0 midbox confirms no space 0 data did not match TSN 0 TSN's marked for Fast Retran Timeouts: 0 iterator timers fired 0 T3 data time outs 0 window probe (T3) timers fired 0 INIT timers fired 0 sack timers fired 0 shutdown timers fired 0 heartbeat timers fired 0 a cookie timeout fired 0 an endpoint changed its cookiesecret 0 PMTU timers fired 0 shutdown ack timers fired 0 shutdown guard timers fired 0 stream reset timers fired 0 early FR timers fired 0 an asconf timer fired 0 auto close timer fired 0 asoc free timers expired 0 inp free timers expired 0 packet shorter than header 0 checksum error 0 no endpoint for port 0 bad v-tag 0 bad SID 0 no memory 0 number of multiple FR in a RTT window 0 RFC813 allowed sending 0 RFC813 does not allow sending 0 times max burst prohibited sending 0 look ahead tells us no memory in interface 0 numbers of window probes sent 0 times an output error to clamp down on next user send 0 times sctp_senderrors were caused from a user 0 number of in data drops due to chunk limit reached 0 number of in data drops due to rwnd limit reached 0 times a ECN reduced the cwnd 0 used express lookup via vtag 0 collision in express lookup 0 times the sender ran dry of user data on primary 0 same for above 0 sacks the slow way 0 window update only sacks sent 0 sends with sinfo_flags !=0 0 unordered sends 0 sends with EOF flag set 0 sends with ABORT flag set 0 times protocol drain called 0 times we did a protocol drain 0 times recv was called with peek 0 cached chunks used 0 cached stream oq's used 0 unread messages abandonded by close 0 send burst avoidance, already max burst inflight to net 0 send cwnd full avoidance, already max burst inflight to net 0 number of map array over-runs via fwd-tsn's ip: 137814085 total packets received 0 bad header checksums 0 with size smaller than minimum 0 with data size < data length 0 with ip length > max ip packet size 0 with header length < data size 0 with data length < header length 0 with bad options 0 with incorrect version number 1200 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 300 packets reassembled ok 137813009 packets for this host 530 packets for unknown/unsupported protocol 0 packets forwarded (0 packets fast forwarded) 61 packets not forwardable 0 packets received for unknown multicast group 0 redirects sent 137234598 packets sent from this host 0 packets sent with fabricated ip header 685307 output packets dropped due to no bufs, etc. 52 output packets discarded due to no route 300 output datagrams fragmented 1200 fragments created 0 datagrams that can't be fragmented 0 tunneling packets that can't find gif 0 datagrams with bad address in header icmp: 0 calls to icmp_error 0 errors not generated in response to an icmp message Output histogram: echo reply: 305 0 messages with bad code fields 0 messages less than the minimum length 0 messages with bad checksum 0 messages with bad length 0 multicast echo requests ignored 0 multicast timestamp requests ignored Input histogram: destination unreachable: 530 echo: 305 305 message responses generated 0 invalid return addresses 0 no return routes ICMP address mask responses are disabled igmp: 0 messages received 0 messages received with too few bytes 0 messages received with wrong TTL 0 messages received with bad checksum 0 V1/V2 membership queries received 0 V3 membership queries received 0 membership queries received with invalid field(s) 0 general queries received 0 group queries received 0 group-source queries received 0 group-source queries dropped 0 membership reports received 0 membership reports received with invalid field(s) 0 membership reports received for groups to which we belong 0 V3 reports received without Router Alert 0 membership reports sent arp: 376748 ARP requests sent 3207 ARP replies sent 245245 ARP requests received 80845 ARP replies received 326090 ARP packets received 267712 total packets dropped due to no ARP entry 108876 ARP entrys timed out 0 Duplicate IPs seen ip6: 2226633 total packets received 0 with size smaller than minimum 0 with data size < data length 0 with bad options 0 with incorrect version number 0 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 0 fragments that exceeded limit 0 packets reassembled ok 2226633 packets for this host 0 packets forwarded 0 packets not forwardable 0 redirects sent 2226633 packets sent from this host 0 packets sent with fabricated ip header 0 output packets dropped due to no bufs, etc. 8 output packets discarded due to no route 0 output datagrams fragmented 0 fragments created 0 datagrams that can't be fragmented 0 packets that violated scope rules 0 multicast packets which we don't join Input histogram: UDP: 2226633 Mbuf statistics: 962679 one mbuf 1263954 one ext mbuf 0 two or more ext mbuf 0 packets whose headers are not continuous 0 tunneling packets that can't find gif 0 packets discarded because of too many headers 0 failures of source address selection Source addresses selection rule applied: icmp6: 0 calls to icmp6_error 0 errors not generated in response to an icmp6 message 0 errors not generated because of rate limitation 0 messages with bad code fields 0 messages < minimum length 0 bad checksums 0 messages with bad length Histogram of error messages to be generated: 0 no route 0 administratively prohibited 0 beyond scope 0 address unreachable 0 port unreachable 0 packet too big 0 time exceed transit 0 time exceed reassembly 0 erroneous header field 0 unrecognized next header 0 unrecognized option 0 redirect 0 unknown 0 message responses generated 0 messages with too many ND options 0 messages with bad ND options 0 bad neighbor solicitation messages 0 bad neighbor advertisement messages 0 bad router solicitation messages 0 bad router advertisement messages 0 bad redirect messages 0 path MTU changes rip6: 0 messages received 0 checksum calculations on inbound 0 messages with bad checksum 0 messages dropped due to no socket 0 multicast messages dropped due to no socket 0 messages dropped due to full socket buffers 0 delivered 0 datagrams output netstat -m 516/5124/5640 mbufs in use (current/cache/total) 512/1634/2146/32768 mbuf clusters in use (current/cache/total/max) 512/1536 mbuf+clusters out of packet secondary zone in use (current/cache) 0/1303/1303/12800 4k (page size) jumbo clusters in use (current/cache/total/max) 0/0/0/6400 9k jumbo clusters in use (current/cache/total/max) 0/0/0/3200 16k jumbo clusters in use (current/cache/total/max) 1153K/9761K/10914K bytes allocated to network (current/cache/total) 0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters) 0/0/0 requests for jumbo clusters denied (4k/9k/16k) 0/8/6656 sfbufs in use (current/peak/max) 0 requests for sfbufs denied 0 requests for sfbufs delayed 0 requests for I/O initiated by sendfile 0 calls to protocol drain routines Anyone got an idea what might be the possible cause?

    Read the article

  • RewriteRule not working for certain URLs

    - by keiki
    There are a few domains pointing towards the same server, and of course I need them all redirect to only one of them. Redirects work, but only for certain URLs. What works: http://www.domain.com, http://domain.com, domain.com/index.html, domain.com/index.php, , domain.com/nonExistentDirectory, and if I click in the menu the following URLs are also redirected correctly: domain.com/foo/bar, domain.com/foo/bar.html or .php or other extension. What doesn't work: domain.com/existentDirectory, domain.com/foo/bar (if I type the URL in the address bar). If anyone will have the time and skill and will to tell me where's the mistake, I'll be deeply grateful. Here's my .htaccess file: AddHandler x-httpd-php .html .htm <ifModule mod_gzip.c> mod_gzip_on Yes mod_gzip_dechunk Yes mod_gzip_item_include file \.(html?|txt|css|js|php|pl)$ mod_gzip_item_include handler ^cgi-script$ mod_gzip_item_include mime ^text/.* mod_gzip_item_include mime ^application/x-javascript.* mod_gzip_item_exclude mime ^image/.* mod_gzip_item_exclude rspheader ^Content-Encoding:.*gzip.* </ifModule> <ifModule mod_expires.c> ExpiresActive On ExpiresDefault "access plus 1 seconds" ExpiresByType text/html "access plus 1 seconds" ExpiresByType image/gif "access plus 2592000 seconds" ExpiresByType image/jpeg "access plus 2592000 seconds" ExpiresByType image/png "access plus 2592000 seconds" ExpiresByType text/css "access plus 2592000 seconds" ExpiresByType text/javascript "access plus 216000 seconds" ExpiresByType application/x-javascript "access plus 216000 seconds" </ifModule> <ifModule mod_headers.c> <filesMatch "\\.(ico|pdf|flv|jpg|jpeg|png|gif|swf)$"> Header set Cache-Control "max-age=2592000, public" </filesMatch> <filesMatch "\\.(css)$"> Header set Cache-Control "max-age=2592000, public" </filesMatch> <filesMatch "\\.(js)$"> Header set Cache-Control "max-age=216000, private" </filesMatch> <filesMatch "\\.(xml|txt)$"> Header set Cache-Control "max-age=216000, public, must-revalidate" </filesMatch> <filesMatch "\\.(html|htm|php)$"> Header set Cache-Control "max-age=1, private, must-revalidate" </filesMatch> </ifModule> <ifModule mod_headers.c> Header unset ETag </ifModule> FileETag None <ifModule mod_headers.c> Header unset Last-Modified </ifModule> # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress RewriteCond %{HTTP_HOST} ^foo\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.foo\.com$ RewriteRule (.*) http://domain.com/$1 [R=301,L,QSA] RewriteCond %{HTTP_HOST} ^foo1\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.foo1\.com$ RewriteRule (.*) http://domain.com/$1 [R=301,L,QSA] RewriteCond %{HTTP_HOST} ^foo2\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.foo2\.com$ RewriteRule (.*) http://domain.com/$1 [R=301,L,QSA] RewriteCond %{HTTP_HOST} ^foo3\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.foo3\.com$ RewriteRule (.*) http://domain.com/$1 [R=301,L,QSA] RewriteCond %{HTTP_HOST} ^foo8\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.foo8\.com$ RewriteRule (.*) http://domain.com/$1 [R=301,L,QSA] Thinking that the above version was overkill, I've also tried to redirect all the requests for domains different than the main on to be redirected to it like this: RewriteCond %{HTTP_HOST} !^domain\.com$ [NC] RewriteRule ^(.*)$ http://domain.com [L,R=301] Is it also wrong? Because it doesn't work either! P.S. @Sodved I've tried that and it doesn't help (I comment here because I can't seem to be able to comment your answer.) Removing the following piece of code didn't solve the issue either, so the problem must be somewhere else: # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress New details: using this tool for checking the redirects I got the following results for the URLs that are not redirected: Checked link: http://domain.com/aDirectory/ Type of link: direct link (note the trailing slash above) and: Checked link: http://domain.com/aDirectory Type of redirect: 301 Moved Permanently Redirected to: http://domain.com/aDirectory/ (no trailing slash here) I hope/suspect I'm getting closer to the cause of this behavior.

    Read the article

  • Can't install php5 on Ubuntu

    - by Itay Moav
    I try to apt-get install php5 I get: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: php5: Depends: libapache2-mod-php5 (>= 5.3.99+5.4.0-1~842.gbp76989e) but it is not going to be installed or libapache2-mod-php5filter (>= 5.3.99+5.4.0-1~842.gbp76989e) but it is not going to be installed or php5-cgi (>= 5.3.99+5.4.0-1~842.gbp76989e) but it is not going to be installed or php5-fpm (>= 5.3.99+5.4.0-1~842.gbp76989e) but it is not going to be installed I am on ubuntu 10.4 Do not wish to upgrade to the one that has the Unity UI.

    Read the article

  • How is fundamental mathematics efficiently evaluated by programming languages?

    - by Korvin Szanto
    As I get more and more involved with the theory behind programming, I find myself fascinated and dumbfounded by seemingly simple things.. I realize that my understanding of the majority of fundamental processes is justified through circular logic Q: How does this work? A: Because it does! I hate this realization! I love knowledge, and on top of that I love learning, which leads me to my question (albeit it's a broad one). Question: How are fundamental mathematical operators assessed with programming languages? How have current methods been improved? Example var = 5 * 5; My interpretation: $num1 = 5; $num2 = 5; $num3 = 0; while ($num2 > 0) { $num3 = $num3 + $num1; $num2 = $num2 - 1; } echo $num3; This seems to be highly inefficient. With Higher factors, this method is very slow while the standard built in method is instantanious. How would you simulate multiplication without iterating addition? var = 5 / 5; How is this even done? I can't think of a way to literally split it 5 into 5 equal parts. var = 5 ^ 5; Iterations of iterations of addition? My interpretation: $base = 5; $mod = 5; $num1 = $base; while ($mod > 1) { $num2 = 5; $num3 = 0; while ($num2 > 0) { $num3 = $num3 + $num1; $num2 = $num2 - 1; } $num1 = $num3; $mod -=1; } echo $num3; Again, this is EXTREMELY inefficient, yet I can't think of another way to do this. This same question extends to all mathematical related functions that are handled automagically.

    Read the article

  • How do you start modding a game without an editor?

    - by Protector one
    I often come across very impressive mods for PC games that don't have an official editor, other development tools or its source code publicly available. (Take this amazing Multiplayer mod for Just Cause 2, for example.) How do you go about creating mods for such games? I'm not talking about replacing the odd texture or 3D model—that sort of thing seems fairly easy given tools to pry them out of game files and put them back in—but more along the lines of adding game behavior. (Tweaking settings files also doesn't count.) Note that I'm not asking "how to create a mod", I just want to know where to start or where to go to learn.

    Read the article

  • What are the steps taken by this GLSL code?

    - by user827992
    1 void main(void) 2 { 3 vec2 pos = mod(gl_FragCoord.xy, vec2(50.0)) - vec2(25.0); 4 float dist_squared = dot(pos, pos); 5 6 gl_FragColor = (dist_squared < 400.0) 7 ? vec4(.90, .90, .90, 1.0) 8 : vec4(.20, .20, .40, 1.0); 9 } taken from http://people.freedesktop.org/~idr/OpenGL_tutorials/03-fragment-intro.html Now, this looks really trivial and simple, but my problem is with the mod function. This function is taking 2 vec2 as inputs but is supposed to take just 2 atomic arguments according to the official documentation, also this function makes an implicit use of the floor function that only accepts, again, 1 atomic argument. Can someone explain this to me step by step and point out what I'm not getting here? It's some kind of OpenGL trick? OpenGL Math trick? in the GLSL docs i always find and explicit reference to the type accepted by the function and vec2 it's not there.

    Read the article

  • Can minecraft support an asymmetrical mesh?

    - by Qwaar
    So in a bout of fancy I have decided I want to play as a Zaku II from gundam, and was saddened that player skins must be symmetrical. Then I remembered my friends mod that let him play as a MLP pony, and another one that let you shapeshift into mobs. So I decided I could just butcher a player model mesh and slap on the shoulder spike and shield, slap a Zaku skin I found on it, port the colors over onto more texture for the shoulder portions, and call it a day once I added it to the shiftable list, before butchering a gun mod to turn a gun into a ZMP-78. Before I get started on this though, I need to know if minecraft will support an asymmetrical mesh.

    Read the article

  • ??????????? - Java SE Embedded 8

    - by kshimizu-Oracle
    Java?OS??????1?????????????????????????????????3?????????????? HEAP: Java????????????????????????????????? NON-HEAP: NON-HEAP????JVM???????????????????Code Cache?Metaspace???2????????????? Code Cache: ????JIT??????????????????????????? Metaspace: HEAP??????????????????????????   JavaVM??????????: VM?????????????????? ??????????????? ????????????????????????????????????????????????????????????????????????? HEAP?Java Mission Control???????????????????? (????)? ????Java SE?????????????API????????????????????????????????????? Mission Control?????API?????????????????????????????????API??????????????? HEAP???????????? VM????????"-Xmx"???????????????? java.lang.Runtime.maxMemory(); ?????HEAP????????? ?????VM????????"-Xms"? ????????????? "-Xms"???????"-Xmx"?????????? java.lang.Runtime.totalMemory(); ???????????HEAP????????????? java.lang.Runtime.freeMemory(); ??NON-HEAP???????????? API??????????? Java Mission Control?????????? ????????????Java Mission Control??????????????????????? ????"NON_HEAP"?????????NON-HEAP?????? ???? HEAP????NON-HEAP?????????????? Java VM???????????????????????????????????????? ?????????????????????????????????? ????HEAP/NON-HEAP?????????????????????????? OS?????????????? Linux???????procfs?Java??????????????????? (VmHWM or VmRSS) ????? ????HEAP/NON-HEAP??????????????????????????? ?????????????????? ??????JVM?????????????????? ?????????????????JVM???????????????????? ???JVM?????? ????????????? Embedded??JVM?????????? ??Embedded???Oracle JVM??????CPU????????????????????????????????????????? ??????CPU??????????????????????????????????????? Minimal/Client/Server??JVM???????????????? ????JVM??????????????????? ??????Compact????????????????? ? 2 - 3?????? Concept Guide (http://docs.oracle.com/javase/8/embedded/embedded-concepts/basic-concepts.htm) ???????? ??JVM??????????? ????????????????????? -Xms: ??????????? ?????????? ?????????????????????????????????????????????????? -Xmx: ??????????? -XX:ReservedCodeCacheSize: Code Cache??????? ?) JIT??????????????Code Cache????????????0???????? -Xint: JIT??????????? ????????????? JIT?????????????????????? ????????????????? -Xss: ???????????????????? ????????????????????????? ????????????????????????????? -XX:CompileThreshold: JIT?????????????????????????????????? ?????????????????????? ????????? ?????????????????? Code Cache?????????? ?????????? ????????????????????? ????????????????????????? ??????????????????????? ?????????????????????

    Read the article

  • Why doesn't my implementation of ElGamal work for long text strings?

    - by angstrom91
    I'm playing with the El Gamal cryptosystem, and my goal is to be able to encipher and decipher long sequences of text. I have come up with a method that works for short sequences, but does not work for long sequences, and I cannot figure out why. El Gamal requires the plaintext to be an integer. I have turned my string into a byte[] using the .getBytes() method for Strings, and then created a BigInteger out of the byte[]. After encryption/decryption, I turn the BigInteger into a byte[] using the .toByteArray() method for BigIntegers, and then create a new String object from the byte[]. This works perfectly when i call ElGamalEncipher with strings up to 129 characters. With 130 or more characters, the output produced from ElGamalDecipher is garbled. Can someone suggest how to solve this issue? Is this an issue with my method of turning the string into a BigInteger? If so, is there a better way to turn my string of text into a BigInteger and back? Below is my encipher/decipher code with a program to demonstrate the problem. import java.math.BigInteger; public class Main { static BigInteger P = new BigInteger("15893293927989454301918026303382412" + "2586402937727056707057089173871237566896685250125642378268385842" + "6917261652781627945428519810052550093673226849059197769795219973" + "9423619267147615314847625134014485225178547696778149706043781174" + "2873134844164791938367765407368476144402513720666965545242487520" + "288928241768306844169"); static BigInteger G = new BigInteger("33234037774370419907086775226926852" + "1714093595439329931523707339920987838600777935381196897157489391" + "8360683761941170467795379762509619438720072694104701372808513985" + "2267495266642743136795903226571831274837537691982486936010899433" + "1742996138863988537349011363534657200181054004755211807985189183" + "22832092343085067869"); static BigInteger R = new BigInteger("72294619754760174015019300613282868" + "7219874058383991405961870844510501809885568825032608592198728334" + "7842806755320938980653857292210955880919036195738252708294945320" + "3969657021169134916999794791553544054426668823852291733234236693" + "4178738081619274342922698767296233937873073756955509269717272907" + "8566607940937442517"); static BigInteger A = new BigInteger("32189274574111378750865973746687106" + "3695160924347574569923113893643975328118502246784387874381928804" + "6865920942258286938666201264395694101012858796521485171319748255" + "4630425677084511454641229993833255506759834486100188932905136959" + "7287419551379203001848457730376230681693887924162381650252270090" + "28296990388507680954"); public static void main(String[] args) { FewChars(); System.out.println(); ManyChars(); } public static void FewChars() { //ElGamalEncipher(String plaintext, BigInteger p, BigInteger g, BigInteger r) BigInteger[] cipherText = ElGamal.ElGamalEncipher("This is a string " + "of 129 characters which works just fine . This is a string " + "of 129 characters which works just fine . This is a s", P, G, R); System.out.println("This is a string of 129 characters which works " + "just fine . This is a string of 129 characters which works " + "just fine . This is a s"); //ElGamalDecipher(BigInteger c, BigInteger d, BigInteger a, BigInteger p) System.out.println("The decrypted text is: " + ElGamal.ElGamalDecipher(cipherText[0], cipherText[1], A, P)); } public static void ManyChars() { //ElGamalEncipher(String plaintext, BigInteger p, BigInteger g, BigInteger r) BigInteger[] cipherText = ElGamal.ElGamalEncipher("This is a string " + "of 130 characters which doesn’t work! This is a string of " + "130 characters which doesn’t work! This is a string of ", P, G, R); System.out.println("This is a string of 130 characters which doesn’t " + "work! This is a string of 130 characters which doesn’t work!" + " This is a string of "); //ElGamalDecipher(BigInteger c, BigInteger d, BigInteger a, BigInteger p) System.out.println("The decrypted text is: " + ElGamal.ElGamalDecipher(cipherText[0], cipherText[1], A, P)); } } import java.math.BigInteger; import java.security.SecureRandom; public class ElGamal { public static BigInteger[] ElGamalEncipher(String plaintext, BigInteger p, BigInteger g, BigInteger r) { // returns a BigInteger[] cipherText // cipherText[0] is c // cipherText[1] is d SecureRandom sr = new SecureRandom(); BigInteger[] cipherText = new BigInteger[2]; BigInteger pText = new BigInteger(plaintext.getBytes()); // 1: select a random integer k such that 1 <= k <= p-2 BigInteger k = new BigInteger(p.bitLength() - 2, sr); // 2: Compute c = g^k(mod p) BigInteger c = g.modPow(k, p); // 3: Compute d= P*r^k = P(g^a)^k(mod p) BigInteger d = pText.multiply(r.modPow(k, p)).mod(p); // C =(c,d) is the ciphertext cipherText[0] = c; cipherText[1] = d; return cipherText; } public static String ElGamalDecipher(BigInteger c, BigInteger d, BigInteger a, BigInteger p) { //returns the plaintext enciphered as (c,d) // 1: use the private key a to compute the least non-negative residue // of an inverse of (c^a)' (mod p) BigInteger z = c.modPow(a, p).modInverse(p); BigInteger P = z.multiply(d).mod(p); byte[] plainTextArray = P.toByteArray(); return new String(plainTextArray); } }

    Read the article

  • What's the best way to refactor this Rails controller?

    - by Robert DiNicolas
    I'd like some advice on how to best refactor this controller. The controller builds a page of zones and modules. Page has_many zones, zone has_many modules. So zones are just a cluster of modules wrapped in a container. The problem I'm having is that some modules may have some specific queries that I don't want executed on every page, so I've had to add conditions. The conditions just test if the module is on the page, if it is the query is executed. One of the problems with this is if I add a hundred special module queries, the controller has to iterate through each one. I think I would like to see these module condition moved out of the controller as well as all the additional custom actions. I can keep everything in this one controller, but I plan to have many apps using this controller so it could get messy. class PagesController < ApplicationController # GET /pages/1 # GET /pages/1.xml # Show is the main page rendering action, page routes are aliased in routes.rb def show #-+-+-+-+-Core Page Queries-+-+-+-+- @page = Page.find(params[:id]) @zones = @page.zones.find(:all, :order => 'zones.list_order ASC') @mods = @page.mods.find(:all) @columns = Page.columns # restful params to influence page rendering, see routes.rb @fragment = params[:fragment] # render single module @cluster = params[:cluster] # render single zone @head = params[:head] # render html, body and head #-+-+-+-+-Page Level Json Conversions-+-+-+-+- @metas = @page.metas ? ActiveSupport::JSON.decode(@page.metas) : nil @javascripts = @page.javascripts ? ActiveSupport::JSON.decode(@page.javascripts) : nil #-+-+-+-+-Module Specific Queries-+-+-+-+- # would like to refactor this process @mods.each do |mod| # Reps Module Custom Queries if mod.name == "reps" @reps = User.find(:all, :joins => :roles, :conditions => { :roles => { :name => 'rep' } }) end # Listing-poc Module Custom Queries if mod.name == "listing-poc" limit = params[:limit].to_i < 1 ? 10 : params[:limit] PropertyEntry.update_from_listing(mod.service_url) @properties = PropertyEntry.all(:limit => limit, :order => "city desc") end # Talents-index Module Custom Queries if mod.name == "talents-index" @talent = params[:type] @reps = User.find(:all, :joins => :talents, :conditions => { :talents => { :name => @talent } }) end end respond_to do |format| format.html # show.html.erb format.xml { render :xml => @page.to_xml( :include => { :zones => { :include => :mods } } ) } format.json { render :json => @page.to_json } format.css # show.css.erb, CSS dependency manager template end end # for property listing ajax request def update_properties limit = params[:limit].to_i < 1 ? 10 : params[:limit] offset = params[:offset] @properties = PropertyEntry.all(:limit => limit, :offset => offset, :order => "city desc") #render :nothing => true end end So imagine a site with a hundred modules and scores of additional controller actions. I think most would agree that it would be much cleaner if I could move that code out and refactor it to behave more like a configuration.

    Read the article

  • Need .Net method to compute a Google Pagerank request checksum.

    - by Steve K
    The company I work for is currently developing a SEO tool which needs to include a domain or url Pagerank. It is possible to retrieve such data directly from Google by sending a request to the url called by the Google ToolBar. On of the parameters send to that url is a checksum of the domain whose pagerank is being requested. I have found multiple .Net methods for calculating that check sum; however, every one randomly returns corrupt values every so often. I can only handle errors to a certain point before my final data set becomes useless. I know that there are countless tools out there, from browser plugins to desktop applications, that can process page rank, so it can't be impossible. My question, then, is two fold: 1) Any anyone heard of the problem I am having? (specifically in .Net) If so, how can it (or has it) be resolved? 2) Is there a better source for retrieving Pagerank data? Below is the Url and checksum code I have been using. "http://toolbarqueries.google.com/search?client=navclient-auto&ie=UTF-8&oe=UTF-8&features=Rank:&q=info:" & strUrl & "ch=" & strCheckSum where: strUrl = the url being queried strCheckSum = CheckHash(GetHash(url)) (see code below) Any help would be greatly appreciated. ''' <summary> ''' Returns a hash-string from the site's URL ''' </summary> ''' <param name="_SiteURL">full URL as indexed by Google</param> ''' <returns>HASH for site as a string</returns> Private Shared Function GetHash(ByVal _SiteURL As String) As String Try Dim _Check1 As Long = StrToNum(_SiteURL, 5381, 33) Dim _Check2 As Long = StrToNum(_SiteURL, 0, 65599) _Check1 >>= 2 _Check1 = ((_Check1 >> 4) And 67108800) Or (_Check1 And 63) _Check1 = ((_Check1 >> 4) And 4193280) Or (_Check1 And 1023) _Check1 = ((_Check1 >> 4) And 245760) Or (_Check1 And 16383) Dim T1 As Long = ((((_Check1 And 960) << 4) Or (_Check1 And 60)) << 2) Or (_Check2 And 3855) Dim T2 As Long = ((((_Check1 And 4294950912) << 4) Or (_Check1 And 15360)) << 10) Or (_Check2 And 252641280) Return Convert.ToString(T1 Or T2) Catch Return "0" End Try End Function ''' <summary> ''' Checks the HASH-string returned and adds check numbers as necessary ''' </summary> ''' <param name="_HashNum">generated HASH-string</param> ''' <returns>modified HASH-string</returns> Private Shared Function CheckHash(ByVal _HashNum As String) As String Try Dim _CheckByte As Long = 0 Dim _Flag As Long = 0 Dim _tempI As Long = Convert.ToInt64(_HashNum) If _tempI < 0 Then _tempI = _tempI * (-1) End If Dim _Hash As String = _tempI.ToString() Dim _Length As Integer = _Hash.Length For x As Integer = _Length - 1 To 0 Step -1 Dim _quick As Char = _Hash(x) Dim _Re As Long = Convert.ToInt64(_quick.ToString()) If 1 = (_Flag Mod 2) Then _Re += _Re _Re = CLng(((_Re \ 10) + (_Re Mod 10))) End If _CheckByte += _Re _Flag += 1 Next _CheckByte = _CheckByte Mod 10 If 0 <> _CheckByte Then _CheckByte = 10 - _CheckByte If 1 = (_Flag Mod 2) Then If 1 = (_CheckByte Mod 2) Then _CheckByte >>= 1 End If End If End If If _Hash.Length = 9 Then _CheckByte += 5 End If Return "7" + _CheckByte.ToString() + _Hash Catch Return "0" End Try End Function ''' <summary> ''' Converts the string (site URL) into numbers for the HASH ''' </summary> ''' <param name="_str">Site URL as passed by GetHash()</param> ''' <param name="_Chk">Necessary passed value</param> ''' <param name="_Magic">Necessary passed value</param> ''' <returns>Long Integer manipulation of string passed</returns> Private Shared Function StrToNum(ByVal _str As String, ByVal _Chk As Long, ByVal _Magic As Long) As Long Try Dim _Int64Unit As Long = Convert.ToInt64(Math.Pow(2, 32)) Dim _StrLen As Integer = _str.Length For x As Integer = 0 To _StrLen - 1 _Chk *= _Magic If _Chk >= _Int64Unit Then _Chk = (_Chk - (_Int64Unit * Convert.ToInt64(_Chk \ _Int64Unit))) _Chk = IIf((_Chk < -2147483648), (_Chk + _Int64Unit), _Chk) End If _Chk += CLng(Asc(_str(x))) Next Catch End Try Return _Chk End Function

    Read the article

  • EC2 instance suddenly refusing SSH connections and won't respond to ping

    - by Chris
    My instance was running fine and this morning I was able to access a Ruby on Rails app hosted on it. An hour later I suddenly wasn't able to access my site, my SSH connection attempts were refused and the server wasn't even responding to ping. I didn't change anything on my system during that hour and reboots aren't fixing it. I've never had any problems connecting or pinging the system before. Can someone please help? This is on my production system! OS: CentOS 5 AMI ID: ami-10b55379 Type: m1.small [] ~% ssh -v *****@meeteor.com OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to meeteor.com [184.73.235.191] port 22. debug1: connect to address 184.73.235.191 port 22: Connection refused ssh: connect to host meeteor.com port 22: Connection refused [] ~% ping meeteor.com PING meeteor.com (184.73.235.191): 56 data bytes Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 ^C --- meeteor.com ping statistics --- 4 packets transmitted, 0 packets received, 100.0% packet loss [] ~% ========= System Log ========= Restarting system. Linux version 2.6.16-xenU ([email protected]) (gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)) #1 SMP Mon May 28 03:41:49 SAST 2007 BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000006a400000 (usable) 980MB HIGHMEM available. 727MB LOWMEM available. NX (Execute Disable) protection: active IRQ lockup detection disabled Built 1 zonelists Kernel command line: root=/dev/sda1 ro 4 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Xen reported: 2599.998 MHz processor. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Software IO TLB disabled vmalloc area: ee000000-f53fe000, maxmem 2d7fe000 Memory: 1718700k/1748992k available (1958k kernel code, 20948k reserved, 620k data, 144k init, 1003528k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5202.30 BogoMIPS (lpj=26011526) Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) Checking 'hlt' instruction... OK. Brought up 1 CPUs migration_cost=0 Grant table initialized NET: Registered protocol family 16 Brought up 1 CPUs xen_mem: Initialising balloon driver. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered i8042.c: No controller found. RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Xen virtual console successfully installed as tty1 Event-channel device installed. netfront: Initialising virtual ethernet driver. mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 Registering block device major 8 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 Using IPI No-Shortcut mode md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 144k freed *************************************************************** *************************************************************** ** WARNING: Currently emulating unsupported memory accesses ** ** in /lib/tls glibc libraries. The emulation is ** ** slow. To ensure full performance you should ** ** install a 'xen-friendly' (nosegneg) version of ** ** the library, or disable tls support by executing ** ** the following as root: ** ** mv /lib/tls /lib/tls.disabled ** ** Offending process: init (pid=1) ** *************************************************************** *************************************************************** Pausing... 5Pausing... 4Pausing... 3Pausing... 2Pausing... 1Continuing... INIT: version 2.86 booting Welcome to CentOS release 5.4 (Final) Press 'I' to enter interactive startup. Setting clock : Fri Oct 1 14:35:26 EDT 2010 [ OK ] Starting udev: [ OK ] Setting hostname localhost.localdomain: [ OK ] No devices found Setting up Logical Volume Management: [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1 /dev/sda1: clean, 275424/1310720 files, 1161123/2621440 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: [ OK ] INIT: Entering runlevel: 4 Entering non-interactive startup Starting background readahead: [ OK ] Applying ip6tables firewall rules: modprobe: FATAL: Module ip6_tables not found. ip6tables-restore v1.3.5: ip6tables-restore: unable to initializetable 'filter' Error occurred at line: 3 Try `ip6tables-restore -h' or 'ip6tables-restore --help' for more information. [FAILED] Applying iptables firewall rules: [ OK ] Loading additional iptables modules: ip_conntrack_netbios_ns [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... done. [ OK ] Starting auditd: [FAILED] Starting irqbalance: [ OK ] Starting portmap: [ OK ] FATAL: Module lockd not found. Starting NFS statd: [ OK ] Starting RPC idmapd: FATAL: Module sunrpc not found. FATAL: Error running install command for sunrpc Error: RPC MTAB does not exist. Starting system message bus: [ OK ] Starting Bluetooth services:[ OK ] [ OK ] Can't open RFCOMM control socket: Address family not supported by protocol Mounting other filesystems: [ OK ] Starting PC/SC smart card daemon (pcscd): [ OK ] Starting hidd: Can't open HIDP control socket: Address family not supported by protocol [FAILED] Starting autofs: Starting automount: automount: test mount forbidden or incorrect kernel protocol version, kernel protocol version 5.00 or above required. [FAILED] [FAILED] Starting sshd: [ OK ] Starting cups: [ OK ] Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting console mouse services: no console device found[FAILED] Starting crond: [ OK ] Starting xfs: [ OK ] Starting anacron: [ OK ] Starting atd: [ OK ] % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 390 100 390 0 0 58130 0 --:--:-- --:--:-- --:--:-- 58130 100 390 100 390 0 0 56984 0 --:--:-- --:--:-- --:--:-- 0 Starting yum-updatesd: [ OK ] Starting Avahi daemon... [ OK ] Starting HAL daemon: [ OK ] Starting OSSEC: [ OK ] Starting smartd: [ OK ] c CentOS release 5.4 (Final) Kernel 2.6.16-xenU on an i686 domU-12-31-39-00-C4-97 login: INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: Id "3" respawning too fast: disabled for 5 minutes INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: Id "6" respawning too fast: disabled for 5 minutes

    Read the article

  • Gacutil.exe successfully adds assembly, but assembly not viewable in explorer. Why?

    - by Ben McCormack
    I'm running GacUtil.exe from within Visual Studio Command Prompt 2010 to register a dll (CatalogPromotion.dll) to the GAC. After running the utility, it says Assembly Successfully added to the cache, and running gacutil /l CatalogPromotionDll shows that the GAC contains the assembly, but I can't see the assembly when I navigate to C:\WINDOWS\assembly from Windows Explorer. Why can't I see the assembly in WINDOWS\assembly from Windows Explorer but I can see it using gacutil.exe? Background: Here's what I typed into the command prompt for VS Tools: C:\_Dev Projects\VS Projects\bmccormack\CatalogPromotion\CatalogPromotionDll\bin \Debuggacutil /i CatalogPromotionDll.dll Microsoft (R) .NET Global Assembly Cache Utility. Version 4.0.30319.1 Copyright (c) Microsoft Corporation. All rights reserved. Assembly successfully added to the cache C:\_Dev Projects\VS Projects\bmccormack\CatalogPromotion\CatalogPromotionDll\bin \Debuggacutil /l CatalogPromotionDll Microsoft (R) .NET Global Assembly Cache Utility. Version 4.0.30319.1 Copyright (c) Microsoft Corporation. All rights reserved. The Global Assembly Cache contains the following assemblies: CatalogPromotionDll, Version=1.0.0.0, Culture=neutral, PublicKeyToken=9188a175 f199de4a, processorArchitecture=MSIL Number of items = 1 However, the assembly doesn't show up in C:\WINDOWS\assembly.

    Read the article

  • How to support both HTTP and HTTPS channels in Flex/BlazeDS?

    - by digitalsanctum
    I've been trying to find the right configuration for supporting both http/s requests in a Flex app. I've read all the docs and they allude to doing something like the following: <default-channels> <channel ref="my-secure-amf"> <serialization> <log-property-errors>true</log-property-errors> </serialization> </channel> <channel ref="my-amf"> <serialization> <log-property-errors>true</log-property-errors> </serialization> </channel> This works great when hitting the app via https but get intermittent communication failures when hitting the same app via http. Here's an abbreviated services-config.xml: <channel-definition id="my-amf" class="mx.messaging.channels.AMFChannel"> <endpoint url="http://{server.name}:{server.port}/{context.root}/messagebroker/amf" class="flex.messaging.endpoints.AMFEndpoint"/> <properties> <!-- HTTPS requests don't work on IE when pragma "no-cache" headers are set so you need to set the add-no-cache-headers property to false --> <add-no-cache-headers>false</add-no-cache-headers> <!-- Use to limit the client channel's connect attempt to the specified time interval. --> <connect-timeout-seconds>10</connect-timeout-seconds> </properties> </channel-definition> <channel-definition id="my-secure-amf" class="mx.messaging.channels.SecureAMFChannel"> <!--<endpoint url="https://{server.name}:{server.port}/{context.root}/messagebroker/amfsecure" class="flex.messaging.endpoints.SecureAMFEndpoint"/>--> <endpoint url="https://{server.name}:{server.port}/{context.root}/messagebroker/amfsecure" class="flex.messaging.endpoints.AMFEndpoint"/> <properties> <add-no-cache-headers>false</add-no-cache-headers> <connect-timeout-seconds>10</connect-timeout-seconds> </properties> </channel-definition> I'm running with Tomcat 5.5.17 and Java 5. The BlazeDS docs say this is the best practice. Is there a better way? With this config, there seems to be 2-3 retries associated with each channel defined in the default-channels element so it always takes ~20s before the my-amf channel connects via a http request. Is there a way to override the 2-3 retries to say, 1 retry for each channel? Thanks in advance for answers.

    Read the article

  • Animating sprites in Cocos2d

    - by Christian Budtz
    How do I avoid unneccesary deallocation? I'm running this code: CCSpriteFrameCache * cache = [CCSpriteFrameCache sharedSpriteFrameCache]; [cache addSpriteFramesWithFile:@"boosttexture.plist"]; CCAnimation * animation = [[CCAnimation alloc] initWithName:@"boosting" delay:1/24.0f]; [animation addFrame:[cache spriteFrameByName:@"ship.png"]]; [animation addFrame:[cache spriteFrameByName:@"ship_boost_l_r.png"]]; id action = [CCRepeatForever actionWithAction:[CCAnimate actionWithAnimation:animation]]; [spaceShipSprite runAction:action]; When the animaton is running (granted - its an ugly one), I get this in the console: 2010-04-14 13:40:16.311 Booster2K10Beta[521:20b] cocos2d: deallocing CCSpriteFrame = 00EBA620 | TextureName=4, Rect = (1.00,32.00,32.00,32.00) 2010-04-14 13:40:16.411 Booster2K10Beta[521:20b] cocos2d: deallocing CCSpriteFrame = 00EBA620 | TextureName=4, Rect = (1.00,32.00,32.00,32.00) 2010-04-14 13:40:16.496 Booster2K10Beta[521:20b] cocos2d: deallocing CCSpriteFrame = 00EBA620 | TextureName=4, Rect = (1.00,32.00,32.00,32.00) It seems unneccesary that the same SpriteFrame gets dealloc'ed 24 times per second - how do I avoid that?

    Read the article

  • Disable eclipselink caching and query caching - not working?

    - by James
    I am using eclipselink JPA with a database which is also being updated externally to my application. For that reason there are tables I want to query every few seconds. I can't get this to work even when I try to disable the cache and query cache. For example: EntityManagerFactory entityManagerFactory = Persistence.createEntityManagerFactory("default"); EntityManager em = entityManagerFactory.createEntityManager(); MyLocation one = em.createNamedQuery("MyLocation.findMyLoc").getResultList().get(0); Thread.sleep(10000); MyLocation two = em.createNamedQuery("MyLocation.findMyLoc").getResultList().get(0); System.out.println(one.getCapacity() + " - " + two.getCapacity()); Even though the capacity changes while my application is sleeping the println always prints the same value for one and two. I have added the following to the persistence.xml <property name="eclipselink.cache.shared.default" value="false"/> <property name="eclipselink.query-results-cache" value="false"/> I must be missing something but am running out of ideas. James

    Read the article

  • how caching is implemented using PHP GD

    - by christian
    I want to cache the images of my gallery. Generating images every pages load using GD uses a lot of memory, So I am planning to create a cache image for the images generated by php script done with GD. What will be the best thing to create cache?

    Read the article

  • URL filtering for UIWebView on the iPhone

    - by Zac Altman
    Can someone please shed some light on how I would get this to work: http://www.icab.de/blog/2009/08/18/url-filtering-with-uiwebview-on-the-iphone/ I tried making the "FilteredWebCache.h" and "FilteredWebCache.m" files in my project, but it said that "FilterManager.h" did not exist. What am I meant to do with those files? This I put in viewDidLoad: NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES); NSString *docDir = [paths objectAtIndex:0]; NSString *path = docDir; // the path to the cache file NSUInteger discCapacity = 10*1024*1024; NSUInteger memoryCapacity = 512*1024; FilteredWebCache *cache = [[FilteredWebCache alloc] initWithMemoryCapacity:memoryCapacity diskCapacity:discCapacity diskPath:path]; [NSURLCache setSharedURLCache:cache]; [cache release];

    Read the article

  • hibernate and ehcache replication

    - by cachingsol
    Hi, I am working on a cache replication solution between nodes Node A - master node = Hibernate + Database + Ehcache as secondary cache Node B - regional node= Ehcache as prmiary cache. no Hibernate Node B is used only as near-by cache for query. Now I am updating data (Say SudentInfo) in Node A, it gets persisted and cached correctly. On replication side (I am using JMS) it sends a message to Node B. But the problem is, the message it sends is of instance CacheEntry(deep Inside Element), there is no way to resurrect the original object (StudentInfo). What I got in node B is CacheEntry with some attributes of Students but not actually an Student Object. Please note that I don't need Hibernate session/persistence in Node B, node B is only for fast query, persistence is done through Node A. So has anybody tried any solution like this? Is there any way to convert CacheEntry to actual object? or Tell ehcache to replicate original object rather than CacheEntry. Thanks for the help

    Read the article

  • atomic writes to ehcache

    - by Jacques René Mesrine
    Context I am storing a java.util.List inside ehcache. Key(String) --> List<UserDetail> The ordered List contains a Top 10 ranking of my most active users. Problem Concurrent 3rd party clients might be requesting for this list. I have a requirement to be as current as possible with regards to the ranking. Thus if the ranking is changed due the activities of users, the ordered List in the cache must not be left stale for very long. Once I've recalculated a new List, I want to replace the one in cache immediately. Consider a busy scenario whereby multiple concurrent clients are requesting for the ranking; how can I replace the cache item in an fashion such that: Clients can continue to pull a possibly stale snapshot. They should never get a null value. There will only be 1 server thread that writes to the cache.

    Read the article

  • Twitter-OAuth update_profile_*_image methods problem [EpiTwitter]

    - by KPL
    People, I have been struggling over the two methods - Update Profile Image and Update Background Image I am using EpiTwitter library. I am uploading GIFs, Twitter returns the expected result for update_profile_background_image but returns 401 for update_profile_image , but the image is not changed. Here are the headers catched from $apiObj-headers in my case while using the update_profile_background_image Array ( [Date] = Sat, 24 Apr 2010 17:51:36 GMT [Server] = hi [Status] = 200 OK [X-Transaction] = 1272131495-55190-23911 [ETag] = b6a421c01936f3547802ae6b59ee7ef3" [Last-Modified] = Sat, 24 Apr 2010 17:51:36 GMT [X-Runtime] = 0.13990 [Content-Type] = application/json; charset=utf-8 [Content-Length] = 1272 [Pragma] = no-cache [X-Revision] = DEV [Expires] = Tue, 31 Mar 1981 05:00:00 GMT [Cache-Control] = no-cache, no-store, must-revalidate, pre- check=0, post-check=0 [Set-Cookie] = *REMOVED* [Vary] = Accept-Encoding [Connection] = close ) and for update_profile_image - Array ( [Date] => Sat, 24 Apr 2010 17:57:58 GMT [Server] => hi [Status] => 401 Unauthorized [WWW-Authenticate] => Basic realm="Twitter API" [X-Runtime] => 0.02263 [Content-Type] => text/html; charset=utf-8 [Content-Length] => 152 [Cache-Control] => no-cache, max-age=300 [Set-Cookie] => *REMOVED* [Expires] => Sat, 24 Apr 2010 18:02:58 GMT [Vary] => Accept-Encoding [Connection] => close ) Can somebody help me out?

    Read the article

  • jquery ui autocomplete problem

    - by Roger
    Hi, i've got a select box containing countries, and when one is selected, i want my autocomplete data for the city field to load via ajax. here's my code: // Sets up the autocompleter depending on the currently // selected country $(document).ready(function() { var cache = getCities(); $('#registration_city_id').autocomplete( { source: cache } ); cache = getCities(); // update the cache array when a different country is selected $("#registration_country_id").change(function() { cache = getCities(); }); }); /** * Gets the cities associated with the currently selected country */ function getCities() { var cityId = $("#registration_country_id :selected").attr('value'); return $.getJSON("/ajax/cities/" + cityId + ".html"); } This returns the following json: ["Aberdare","Aberdeen","Aberystwyth","Abingdon","Accrington","Airdrie","Aldershot","Alfreton","Alloa","Altrincham","Amersham","Andover","Antrim","Arbroath","Ardrossan","Arnold","Ashford","Ashington","Ashton-under-Lyne","Atherton","Aylesbury","Ayr",... ] But, it doesn't work. When i start typing in the city box, the style changes so the autocompleter is doing something, but it won't display this data. If i hard-code the above it works. Can anyone see what's wrong? Thanks

    Read the article

  • Nginx virtual server only partially working with Java application

    - by MFB
    Final Cut Server is a Java application (made by Apple) which launches from a web page. I have Nginx in front of this web server (amongst others) and, whilst the web server can be browsed externally, the Java app fails to launch correctly and throws the errors below. Can anyone offer clues as to what additional config I many have to add to Nginx to get this working? My existing Nginx config: user xxxx; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 1024; # multi_accept on; } http { sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; include /etc/nginx/conf/mime.types; default_type application/octet-stream; access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; gzip on; gzip_disable "msie6"; server { server_name _; return 444; } upstream fcs-site { server 10.10.5.20:8080; } server { listen 80; server_name example.com 10.10.5.90; access_log /var/log/nginx/fcs_access.log; error_log /var/log/nginx/fcs_error.log; location / { proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Proto $scheme; client_max_body_size 10m; client_body_buffer_size 128k; proxy_connect_timeout 60s; proxy_send_timeout 90s; proxy_read_timeout 90s; proxy_buffering off; proxy_temp_file_write_size 64k; proxy_pass http://fcs-site; proxy_redirect off; } } upstream myapp-site { server 127.0.0.1:6543; } server { listen 80; server_name otherexample.com www.otherexample.com; rewrite ^ https://$server_name$request_uri? permanent; } server { listen 443; ssl on; ssl_certificate /etc/ssl/otherapp.crt; ssl_certificate_key /etc/ssl/otherapp.key; server_name otherexample.com www.otherexample.com; access_log /var/log/nginx/otherapp_access.log; error_log /var/log/nginx/other_error.log; location / { proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Proto $scheme; client_max_body_size 10m; client_body_buffer_size 128k; proxy_connect_timeout 60s; proxy_send_timeout 90s; proxy_read_timeout 90s; proxy_buffering off; proxy_temp_file_write_size 64k; proxy_pass http://myapp-site; proxy_redirect off; } location /static { root /www; expires 30d; add_header Cache-Control public; access_log off; } } Java errors: com.sun.deploy.net.FailedDownloadException: Unable to load resource: http://example.com:8080/FinalCutServer/FinalCutServer_mac.jnlp at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source) at com.sun.deploy.net.DownloadEngine._downloadCacheEntry(Unknown Source) at com.sun.deploy.cache.ResourceProviderImpl.getResourceCacheEntry(Unknown Source) at com.sun.deploy.cache.ResourceProviderImpl.getResourceCacheEntry(Unknown Source) at com.sun.deploy.cache.ResourceProviderImpl.getResource(Unknown Source) at com.sun.javaws.Launcher.updateFinalLaunchDesc(Unknown Source) at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source) at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source) at com.sun.javaws.Launcher.launch(Unknown Source) at com.sun.javaws.Main.launchApp(Unknown Source) at com.sun.javaws.Main.continueInSecureThread(Unknown Source) at com.sun.javaws.Main.access$000(Unknown Source) at com.sun.javaws.Main$1.run(Unknown Source) at java.lang.Thread.run(Thread.java:722) java.net.ConnectException: Operation timed out at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.AbstractPlainSocketImpl.doConnect(AbstractPlainSocketImpl.java:339) at java.net.AbstractPlainSocketImpl.connectToAddress(AbstractPlainSocketImpl.java:200) at java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:391) at java.net.Socket.connect(Socket.java:579) at java.net.Socket.connect(Socket.java:528) at sun.net.NetworkClient.doConnect(NetworkClient.java:180) at sun.net.www.http.HttpClient.openServer(HttpClient.java:378) at sun.net.www.http.HttpClient.openServer(HttpClient.java:473) at sun.net.www.http.HttpClient.(HttpClient.java:203) at sun.net.www.http.HttpClient.New(HttpClient.java:290) at sun.net.www.http.HttpClient.New(HttpClient.java:306) at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLConnection.java:995) at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:931) at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:849) at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source) at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source) at com.sun.deploy.net.BasicHttpRequest.doGetRequest(Unknown Source) at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source) at com.sun.deploy.net.DownloadEngine._downloadCacheEntry(Unknown Source) at com.sun.deploy.cache.ResourceProviderImpl.getResourceCacheEntry(Unknown Source) at com.sun.deploy.cache.ResourceProviderImpl.getResourceCacheEntry(Unknown Source) at com.sun.deploy.cache.ResourceProviderImpl.getResource(Unknown Source) at com.sun.javaws.Launcher.updateFinalLaunchDesc(Unknown Source) at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source) at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source) at com.sun.javaws.Launcher.launch(Unknown Source) at com.sun.javaws.Main.launchApp(Unknown Source) at com.sun.javaws.Main.continueInSecureThread(Unknown Source) at com.sun.javaws.Main.access$000(Unknown Source) at com.sun.javaws.Main$1.run(Unknown Source) at java.lang.Thread.run(Thread.java:722)

    Read the article

  • Memcached and Rails Fragment Caching Issue

    - by Michael Waxman
    When I have 2 views that fragment cache the same query BUT display them differently, there is only one fragment and they both display it the same way. Is there any way around this? For example... #views/posts/list - cache(@posts) do - for p in @posts = p.title #views/posts/list_with_images - cache(@posts) do - for p in @posts = p.title = p.content = image_tag(p.image_url) #controllers/posts_controller def list ... @posts = Post.all end def list_with_images ... @posts = Post.all end

    Read the article

  • Caching web API proxy?

    - by Jeremy Dunck
    I was wondering if anyone knows of a caching proxy specifically for dealing with API responses? Ideally, I'd be able to declare what caching policy to use for different API semantics, e.g. cache album art for 1 day, cache favorite tweets for 5 minutes, cache map tiles forever, except invalidate when this other API is called. I know about using Apache, Squid, etc for caching in general -- I'm just hoping for something with nicer usage semantics by restricting the design goal to dealing with APIs rather than the web in general.

    Read the article

< Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >