Search Results

Search found 12061 results on 483 pages for 'non printable'.

Page 138/483 | < Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >

• DPMS does not work: the monitor is not switched off

  - by bortzmeyer

  I have a monitor which was properly switched off by my Debian PC when unused. I attached it to another machine and, this times, it is never switched off. In /etc/X11/xorg.conf, I have: Section "Monitor" Identifier "Generic Monitor" Option "DPMS" It is recognized when X11 starts: (II) Loading extension DPMS ... (II) VESA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display ... (**) Option "dpms" (**) VESA(0): DPMS enabled The operating system is Debian stable "lenny". The graphics card is: 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrate d Graphics Controller (rev 02) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device 2a6f Flags: bus master, fast devsel, latency 0, IRQ 5 Memory at fe900000 (32-bit, non-prefetchable) [size=512K] I/O ports at b080 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at fe800000 (32-bit, non-prefetchable) [size=1M] Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-Capabilities: [d0] Power Management version 2 X11 is: X.Org X Server 1.4.2 Release Date: 11 June 2008 X Protocol Version 11, Revision 0 Build Operating System: Linux Debian (xorg-server 2:1.4.2-10.lenny2) Current Operating System: Linux ludwigVII 2.6.26-2-686 #1 SMP Sun Jun 21 04:57:3 8 UTC 2009 i686 Build Date: 08 June 2009 09:12:57AM

  Read the article

• GIT : I keep having to merge my new branch

  - by mnml

  Hi, I have created a new branch and I'm working on it with others dev but for reasons when I want to push my new commits I always have to git merge origin/mynewbranch Otherwise I'm getting some errors: ! [rejected] mynewbranch -> mynewbranch (non-fast-forward) error: failed to push some refs to '[email protected]/repo.git' To prevent you from losing history, non-fast-forward updates were rejected Merge the remote changes before pushing again. See the 'Note about fast-forwards' section of 'git push --help' for details. You asked me to pull without telling me which branch you want to merge with, and 'branch.mynewbranch.merge' in your configuration file does not tell me, either. Please specify which branch you want to use on the command line and try again (e.g. 'git pull <repository> <refspec>'). See git-pull(1) for details. If you often merge with the same branch, you may want to use something like the following in your configuration file: [branch "mynewbranch"] remote = <nickname> merge = <remote-ref> [remote "<nickname>"] url = <url> fetch = <refspec> See git-config(1) for details. Why is it not automatic? Thanks

  Read the article

• Howto enable SMPTS (465) postfix CentOS

  - by user197284

  I need help is enabling SMTPS. I use postfix , dovecot with MySQL(virtual domains). I do not know how to enable SMTPS(465). I already added tls related settings and key and certificate in the "/etc/postfix/main.cf" OS: Centos 6.4 64 bit Please my /etc/postfix/master.cf file here # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - n - - smtpd -o content_filter=smtp-amavis:127.0.0.1:10024 -o receive_override_options=no_address_mappings pickup fifo n - n 60 1 pickup -o content_filter= -o receive_override_options=no_header_body_checks cleanup unix n - n - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - n 300 1 oqmgr tlsmgr unix - - n 1000? 1 tlsmgr rewrite unix - - n - - trivial-rewrite bounce unix - - n - 0 bounce defer unix - - n - 0 bounce trace unix - - n - 0 bounce verify unix - - n - 1 verify flush unix n - n 1000? 0 flush proxymap unix - - n - - proxymap smtp unix - - n - - smtp # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - n - - smtp -o fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - n - - showq error unix - - n - - error discard unix - - n - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - n - - lmtp anvil unix - - n - 1 anvil scache unix - - n - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # ==================================================================== maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient} uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient # # spam/virus section # smtp-amavis unix - - y - 2 smtp -o smtp_data_done_timeout=1200 -o disable_dns_lookups=yes -o smtp_send_xforward_command=yes 127.0.0.1:10025 inet n - y - - smtpd -o content_filter= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8 -o smtpd_error_sleep_time=0 -o smtpd_soft_error_limit=1001 -o smtpd_hard_error_limit=1000 -o receive_override_options=no_header_body_checks -o smtpd_bind_address=127.0.0.1 -o smtpd_helo_required=no -o smtpd_client_restrictions= -o smtpd_restriction_classes= -o disable_vrfy_command=no -o strict_rfc821_envelopes=yes # # Dovecot LDA dovecot unix - n n - - pipe flags=DRhu user=vmail:mail argv=/usr/libexec/dovecot/deliver -d ${recipient} # # Vacation mail vacation unix - n n - - pipe flags=Rq user=vacation argv=/var/spool/vacation/vacation.pl -f ${sender} -- ${recipient} retry unix - - n - - error proxywrite unix - - n - 1 proxymap Please help to enable SMTPS. I have amavis enabled

  Read the article

• USB seems to pause system

  - by Marco van de Voort

  I've an application that does some simple measuring, for which it polls a few 100kbs several times a second (8-25 times) The behaviour is not really dependant on chipset (happens on several mobo's intel 965- P55) and OSes (XPsp3 and win7). Also the make of the USB keyboard doesn't seem to matter. I notice that sometimes when an USB kbd is plugged in, the system pauses for say 500-1000ms. (about 900-1000ms on disconnect, and 400-500 on the subsequent connect) It also happens for other USB devices (most notably mice and massstorage devices), but only the first time such device is connected to an installation. This disrupts the measurement and I really would like to get rid on this. I already tried to disable as much as possible. (powersave, teletubby mode (*) etc), and while this helped with the non-USB related disruptions of the measurement, it doesn't help with the USB related ones. (*) fyi, turning off themes (to resp. classic/non-aero), and turning off effects in system solved problems that occured when minimizing/maximizing the app. Any pointers to look into? I'm a bit stuck with this.

  Read the article

• Mesh Networked servers via vpn

  - by microspino

  I got a design idea and I would like to have some advice from SF about It. I have 5 customers with small real-estate databases. I've built for them a desktop app and now they would like to merge their database to share their data. I don't want to centralize everything in one place nor I want to do maintenance for servers. They told me also, that all of them in their offices, have little servers and maintenance guys available. Although everything seems suitable for web application, I had the idea to experiment something new: Any customer small-server wild be connected to the others in a sort of mesh network without a single point of failure and through VPNs. If one of the servers went down the customers could still connect to their databases from one of the other mesh networked servers instead of from the local one that is down. During normal operations all the servers sync the db with the others through VPNs. I can accept a half-day timing window of NON synched data, in other words, since I don't need real time synchronization, the server don't have to always stay in synch. I can migrate my data over to other Non-Sql technologies like CouchDB or Redis or whatever you suggest. As you can see I don't have a lot of constraints and although I could go with a web application I would like to delegate and decentralize support, data-privacy and management, as more as I can to my customers offices. Is that a crazy idea? Do you know If something similar exist? Which technology would you suggest?

  Read the article

• DNS lookup fails when with all the MAC workstations

  - by user39564

  Hi, I am having this insane problem. We are mac-heavy users. Around 10 workstations, one Xserve server, two windows workstation and one Linux (me). Last year I added an A record to our domain's DNS. However we had to change that a few months ago to a new IP. But all the Mac workstations fail to resolve the proper DNS and they still resolve to the old IP, even after 2 months. On both the windows workstation and my linux box a simple nslookup resolves to proper IP. However, on ALL the mac workstation, dig and nslookup report the old IP address. From my linux workstation: jp@lo:~$ nslookup - 208.67.222.222 client.xyz.com Server: 208.67.222.222 Address: 208.67.222.222#53 Non-authoritative answer: Name: client.xyz.com Address: 68.71.40.xx But when I am trying the exact same command from any Mac workstation, I get the old IP: $ nslookup - 208.67.222.222 client.xyz.com Server: 208.67.222.222 Address: 208.67.222.222#53 Non-authoritative answer: Name: client.xyz.com Address: 98.143.155.xx The strange thing is that this only happens in our internal network. No problem from home nor from another server. I did try to flush the DNS, don't worry. It did not help. I am starting to wonder if my router (OpenWRT) or Mac OS X Server is not in some way spoofing the DNS request and thus acting as a cache. Any suggestions/comments would be grateful. Thank you, JP

  Read the article

• Macros in Excel 2010 hangs

  - by Ahmad

  I have a spreadsheet with several macros. Generally, when previously using Excel 2007, a user clicks a button and everything works as expected (calculations, some email sending & file I/O). Typically, the expected run-time is about 90 seconds. The spreadsheet is a xlsm file created with Excel 2007. With Excel 2010 however, the same user process results in a non-responsive excel and forces us to kill excel from the task manager. Some note that I have gathered so far in trying to debug this issue: When monitoring CPU usage, it seems that Excel does start the macro. CPU usage increases as expected to about 47% for a few seconds. Excel.exe than drops to 0% usage and I now have a non-responsive Excel (even after 1 hour). If I set debug break points across modules and different functions and step through the code (after clicking the button) , the process works as expected albeit much slower. To add, there were no exceptions. I am at a complete loss as to what the issue may be. I initially thought it may be the add in that is being used but that was debunked by point 2. This seems to be a very odd situation. I can provide more information if required, but I'm at wits end about the root cause could be. I need help in diagnosing and resolving this issue.

  Read the article

• Unix apt-get doesnt download from nfs locaiton

  - by pravesh

  I have switched to unix from last 3 months and trying to understand install process and in particular apt-get. I am able to successfully install and download the packages when I configure my repository on http location in /etc/apt/sources.list file. e.g. deb http://web.myspqce.com/u/eng/rose/debian-mirror-squeeze-amd64/mirror/ftp.us.debian.org/debian/ squeeze main contrib non-free This command will download(/var/cache/apt/archive) and install the package when i use apt-get install When I change the source location to file instead of http(nfs mount point), the package is getting installed but NOT getting downloaded in /var/cache/apt/archive. deb file:/deb_repository/debian-mirror-squeeze-amd64/mirror/ftp.us.debian.org/debian/ squeeze main contrib non-free Please let me know if there is any configuration or settings that i have to make to let apt-get to both download and install package when i use (nfs)file:/ instead of http:/ in sources.list. To achieve this, I can use apt-get --downlaod-only and then use apt-get install for both download and install in two separate calls, but I want to know why package is not getting downloaded with apt-get install but only getting installed when used with file:/ in sources.list

  Read the article

• Batch Script to Trim lines in text to first 30 or 50 characters only

  - by SuperUserMan

  I am now new to scripts but i find it really difficult understanding "for" command (especially with that tokens and delimiters etc) . Saying so, i think that for command can be used to do what i am doing. If its not and there is an easier way, ignore my ignorance :( Say i have multiple lines in a text file abc.txt with each line starting and ending with " (quotes) E.g. a file of 3 lines "hey what is going on @mike220. I am working on your car. Its engine is in very bad condition" "Because if you knew, you'd get shredded and do it with certainty" "@honey220 Do you know someone who has busted their ass on a diet only for results to come to a screeching halt after a few weeks" How can i trim each line, within the quotes, to a Fixed length say 30 or 50 or 100 characters (including spaces) I want to enter the number of character in batch and it can trim accordingly and produce a file def.txt with trimmed lines within quotes. Say i enter 50, results of above example should be "hey what is going on @mike220. I am working on you" "Because if you knew, you'd get shredded and do it" "@honey220 Do you know someone who has busted their" Thanks P.S. if you use For command, kindly please explain the command. EDIT: Though the answer provided worked, there is an issue with non english text. I am getting garbled text in Output file for non english text in input file . Any help @barlop here is the nonenglish text ( 1 line) "???? ?? ???? ?? ???? ???? ??? ?????? ???"

  Read the article

• Linux security: The dangers of executing malignant code as a standard user

  - by AndreasT

  Slipping some (non-root) user a piece of malignant code that he or she executes might be considered as one of the highest security breaches possible. (The only higher I can see is actually accessing the root user) What can an attacker effectively do when he/she gets a standard, (let's say a normal Ubuntu user) to execute code? Where would an attacker go from there? What would that piece of code do? Let's say that the user is not stupid enough to be lured into entering the root/sudo password into a form/program she doesn't know. Only software from trusted sources is installed. The way I see it there is not really much one could do, is there? Addition: I partially ask this because I am thinking of granting some people shell (non-root) access to my server. They should be able to have normal access to programs. I want them to be able to compile programs with gcc. So there will definitely be arbitrary code run in user-space...

  Read the article

• Why database partitioning didn't work? Extract from thedailywtf.com

  - by questzen

  Original link. http://thedailywtf.com/Articles/The-Certified-DBA.aspx. Article summary: The DBA suggests an approach involving rigorous partitioning, 10 partitions per disk (3 actual disks and 3 raid). The stats show that the performance is non-optimal. Then the DBA suggests an alternative of 1 partition per disk (with more added disks). This also fails. The sys-admin then sets up a single disk, single partition and saves the day. The size of disks was not mentioned but given today,s typical disk sizes (of the order of 100 GB), the partitions ; would be huge, it surprises me that a single disk with all partitions outperformed. Initially I suspect that the data was segregated and hence faster reads. But how come the performance didn't degrade as time went by with all the inserts and updates happening? Saw this on reddit, but the explanation was by far spindle/platter centered. There was no mention in the article about this. Is there any other reason? I can only guess that the tables were using a incorrect hash distribution causing non-uniform allocation across disks (wrong partitioning); this would increase fetch times. Any thoughts?

  Read the article

• Booting an Asus EeePC from a LiveCD USB stick

  - by Bryan

  I have two identical Asus EeePC netbooks that are both installed with Ubuntu. One of them was sitting on the closet shelf and the battery went completely dead. When I charged the battery and tried to boot the it, I got the "No init found" error. In trying to follow the suggested way to fix it posted here, I used the Startup Disk Creator on my Ubuntu 11.10 desktop machine to create a USB stick with a bootable Ubuntu 11.10 live CD on it (the netbook doesn't have a CD drive). I plugged the USB stick into the netbook with the init issues, went into the BIOS and selected the USB stick as the 1st choice to boot from, and did a hard restart. It then just stuck at the flashing underscore. Not knowing why it wasn't working, I tried booting my working netbook from the USB stick. When I got into the BIOS on the working netbook, I noticed the description in the boot order section for the USB device was different. On the non-working netbook, the description was SWISSBIT (the name of the USB stick) but on the working netbook it was just "Rem. Drive". I also noticed on the working netbook there was an additional option under the bootable order section that allowed me to choose which hard drive to boot from. This section showed two hard drives, one of them being my USB stick. So, rather than changing the device boot order, I selected the USB stick as the hard drive to boot from first and it worked like a champ - I was able to boot into the LiveCD on the USB stick. Seems to me the working netbook is seeing the LiveCD USB stick as a hard drive, where-as the non-working netbook is seeing it as a plain ol' USB stick. The BIOS is the exact same version on both netbooks... any idea why it works on one and not on the other?

  Read the article

• Storing Windows Updates for reuse

  - by Saiyine

  At work we update lots of computers using Windows Update. Windows XP and 7 all day long, rarely some Vista. We do it through a corporate proxy, as connecting them to a domain to build a Wsus server is out of the question, so we download about two gigabytes a day of the very same updates everyday. I've tried WSUS Offline. It's pretty complete but when it finishes it's common to be still missing hundreds of megabytes of updates, because its intention is not to fully update a system but to install the critical updates, as the developers explain in the forums. Now I'm trying with Autoupdater. It's far worse, with poor capabilities for non-English Windows XP, but at least it gives the option to install non critical updates in Windows 7. It still misses hundres of megabytes of updates after fully updating the system. And finally, both doesn't install the driver related updates of Windows 7, so they at most save us a couple of hundreds of megabytes and a reboot (with the associated login to the computer and to the proxy) out of three or four. So, is it possible to somewhat extract the installed updates in a Windows 7 system and not having to download the same updates again and again at least with machines with the same hardware? Or even better, a generic package with all the updates?

  Read the article

• Cannot write to directory after taking ownership

  - by jeff charles

  I had a directory on an internal hard-drive that was created in an old Windows 7 install. After re-installing my operating system, when I try to create a new directory inside that directory, I get an Access Denied message. This isn't a protected directory, just a random directory I created at the drive root (that drive was not the C drive in either install). I tried to take ownership by opening folder properties, going to the Security tab, clicking on Advanced, going to Owner tab, clicking on Edit, selecting my user account, checking Replace owner on subcontainers and objects, and clicking Apply. There were no error messages and I closed the dialogs. I rebooted, checked the owner on that folder and a couple subfolders and it appears to be set correctly. I am still getting an Access Denied message however when trying to create a directory in it. I've also tried using attrib -R . to remove any possible readonly attribute inside the directory in an admin command prompt but am still unable to create a directory using a non-admin prompt (it does work in an admin prompt). Is there anything I can do to get write access to that folder and it's subcontents in a non-elevated context without disabling UAC?

  Read the article

• Change A Password

  - by Thomas

  I have a non-domain machine that I use with our company's domain resources over vpn regularly. I switched to Windows 8 (fresh install), and the "Change a password" option went away from the Ctrl-Alt-Del window. Can't seem to google anything about this subject, or find a way to access that password change dialog. I tried running the .reg file from http://www.sevenforums.com/tutorials/63014-ctrl-alt-del-screen-add-remove-change-password.html with no luck. I also tried to Disable "Remove Change Password" via gpedit.msc. I could do it from my domain laptop, but I like to do it on this machine because it updates all my saved copies of those credentials. My local account is tied to my hotmail account if that matters. Updates: Administrator account. I apologize for stating this was an upgrade, it was a fresh install to a diff't drive. 64-bit Pro install. Bounty's almost up If someone can just confirm that the Change A Password... should or should not be present on a non-domain, Live tied, Win8 install, I'll be satisfied that I can or cannot expect to fix it.

  Read the article

• Ubuntu on VPS becomes unresponsive: BUG: soft lockup - CPU#0 stuck for 22s

  - by Bhante Nandiya

  We have a VPS running Ubuntu, on Xen. The problem is this, about once a day, for about 20-50 minutes, at a random time, the server becomes completely unresponsive to the outside world. After this period, it becomes responsive again, as if nothing had happened, it doesn't lose uptime, it doesn't restart. It just starts responding again as if it had been in suspended animation. These outages occur under conditions of non-exceptional memory and cpu, for example 70% mem, 5% cpu. I have stopped all non-essential services so the usage is very even. These outages don't particularly occur during times of increased memory/cpu (during daily tasks), they sometimes occur at times of very low cpu use (<2%), but in the past also occured during swapping. These blackouts have been occurring both under Ubuntu 12.04 LTS, and Ubuntu 14.04 LTS - no change at all (I upgraded Ubuntu specifically to see if it helped this problem). It is possible to log into our webhosts site, and use their administration console to see error messages from during this time. Presumably, these messages are from the Xen virtualization, the main message goes like this: BUG: soft lockp - CPU#0 stuck for 22s! [ksoftireqd/0:3] (repeats many times) SysRq : Emergency Sync (Sometimes this is the only message in the console) Others seen previously under different load situations include: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:0] (repeated many times) or: INFO: rcu_sched detected stall on CPU 0 (t=15000 jiffies) (repeated many times with t getting bigger) From googling around I've tried various kernel parameters such as nohz=off and acpi=off to no avail. All tech support has said is that other Ubuntu installations are not suffering the same problem. Anyone got any ideas or experience with this problem?

  Read the article

• /etc/hosts: What is loghost? (fresh install of Solaris 10 update 9)

  - by cjavapro

  # # Internet host table # ::1 localhost 127.0.0.1 localhost XX.XX.XX.XX myserver loghost What is the purpose of loghost? If it was not for having loghost in there, all the /etc/hosts files on all the servers in this particular network could be identical. Edit: I looked at /etc/syslog.conf #ident "@(#)syslog.conf 1.5 98/12/14 SMI" /* SunOS 5.0 */ # # Copyright (c) 1991-1998 by Sun Microsystems, Inc. # All rights reserved. # # syslog configuration file. # # This file is processed by m4 so be careful to quote (`') names # that match m4 reserved words. Also, within ifdef's, arguments # containing commas must be quoted. # *.err;kern.notice;auth.notice /dev/sysmsg *.err;kern.debug;daemon.notice;mail.crit /var/adm/messages *.alert;kern.err;daemon.err operator *.alert root *.emerg * # if a non-loghost machine chooses to have authentication messages # sent to the loghost machine, un-comment out the following line: #auth.notice ifdef(`LOGHOST', /var/log/authlog, @loghost) mail.debug ifdef(`LOGHOST', /var/log/syslog, @loghost) # # non-loghost machines will use the following lines to cause "user" # log messages to be logged locally. # ifdef(`LOGHOST', , user.err /dev/sysmsg user.err /var/adm/messages user.alert `root, operator' user.emerg * ) Very interesting. when shutting down,, alerts go to all users probably through *.emerg * Looking at ifdef, it seems that the first parameter checks to see if current machine is a loghost, second parameter is what to do if it is and third parameter is what to do if it is not. Edit: If you want to test a logging rule you can use svcadm restart system-log to restart the logging service and then logger -p notice "test" to send a test log message where notice can be replaced with any type such as user.err, auth.notice, etc.

  Read the article

• What may be wrong with String::ToIdentifier::EN tests?

  - by wk01

  I try to install Perl module String::ToIdentifier::EN (as depndency of DBIx::Class::Schema::Loader) but it fails on tests. I googled those errors but get no picture, where is problem: Building and testing String-ToIdentifier-EN-0.07 cp lib/String/ToIdentifier/EN.pm blib/lib/String/ToIdentifier/EN.pm cp lib/String/ToIdentifier/EN/Unicode.pm blib/lib/String/ToIdentifier/EN/Unicode.pm Manifying blib/man3/String::ToIdentifier::EN.3pm Manifying blib/man3/String::ToIdentifier::EN::Unicode.3pm PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/00_basic.t t/10_ascii.t t/20_capitalization.t Byte order is not compatible at ../../lib/Storable.pm (autosplit into ../../lib/auto/Storable/_retrieve.al) line 380, at /home/wanradt/perl5/lib/perl5/Lingua/EN/Tagger.pm line 167 # Looks like you planned 25 tests but ran 4. # Looks like your test exited with 25 just after 4. t/00_basic.t ........... Dubious, test returned 25 (wstat 6400, 0x1900) Failed 21/25 subtests Byte order is not compatible at ../../lib/Storable.pm (autosplit into ../../lib/auto/Storable/_retrieve.al) line 380, at /home/wanradt/perl5/lib/perl5/Lingua/EN/Tagger.pm line 167 # Looks like you planned 768 tests but ran 512. # Looks like your test exited with 25 just after 512. t/10_ascii.t ........... Dubious, test returned 25 (wstat 6400, 0x1900) Failed 256/768 subtests t/20_capitalization.t .. ok Test Summary Report ------------------- t/00_basic.t (Wstat: 6400 Tests: 4 Failed: 0) Non-zero exit status: 25 Parse errors: Bad plan. You planned 25 tests but ran 4. t/10_ascii.t (Wstat: 6400 Tests: 512 Failed: 0) Non-zero exit status: 25 Parse errors: Bad plan. You planned 768 tests but ran 512. Files=3, Tests=528, 1 wallclock secs ( 0.07 usr 0.02 sys + 0.42 cusr 0.04 csys = 0.55 CPU) Result: FAIL Failed 2/3 test programs. 0/528 subtests failed. make: *** [test_dynamic] Error 255 -> FAIL Installing String::ToIdentifier::EN failed. See /home/wanradt/.cpanm/build.log for details. Byte order is not compatible at... seems a key, but to where?

  Read the article

• RAID5 issue after replacing motherboard and upgrading firmware

  - by 8steve8

  ok so ive had a 4x2TB(samsung HD204UI w/firmware patch) raid5 array working normally for about a month. It was in a h57 gigabyte motherboard using the intel raid with Windows 7 x64. Today I got an intel h67 motherboard, so I upgraded the intel raid drivers to 10.1.0.1008 from 9.6.0.1014, and I'm not sure if i checked after a reboot, but it caused no problems. I swapped in the new dh67 motherboard, and my array status was "failed". 2 of the 4 drives listed themselves as members, while the other two drives listed themselves as non-members. I tried going back to the old h57 mobo, and downgrading the raid drivers, but the issue remains. It's not port dependent, 2 of the drives always come up as non-members regardless of what port or motherboard they are plugged into. This screenshot should show that the SNs match, which raises the question why the software doesn't realize the drive is a member of the array. I'd like to know if anyone has experienced anything similar, and what should I do, can I force the drive to be recognized as a member (without wiping data)?

  Read the article

• Virtualhost one https site, the rest http

  - by RJP1

  I have a linode server with Apache2 running a handful of sites with virtualhosting. All sites work fine on port 80, but one site has a ssl certificate and also runs okay. My problem is as follows: The non-https sites, if visiting https://domain.com - show the contents of the only secure site... Is there a way of disabling the *:443 match for these non-secure sites? Thanks! EDIT (more information): Here's a typical config in sites-available for a normal insecure http site: <VirtualHost *:80> ServerName www.insecure.com ServerAlias insecure.com ... </VirtualHost> The secure https site is as follows: <VirtualHost *:80> ServerName www.secure.com Redirect permanent / https://secure.com/ </VirtualHost> <VirtualHost *:80> ServerName secure.com RedirectMatch permanent ^/(.*) https://secure.com/$1 </VirtualHost> <VirtualHost *:443> SSLEngine on SSLProtocol all SSLCertificateChainFile ... SSLCertificateFile ... SSLCertificateKeyFile ... SSLCACertificateFile ... ServerName secure.com ServerAlias secure.com ... </VirtualHost> So, visiting: http:/insecure.com - works http:/www.insecure.com - works http:/secure.com - redirects to https:/secure.com - works http:/www.secure.com - redirects to https:/secure.com - works https:/insecure.com - shows https:/secure.com - WRONG!

  Read the article

• How do people type different languages into computer?

  - by pecker

  Hello, We have English keyboards. I never saw any other keyboard in my life. I've been wondering for a long time. How do people in Korea, China, Russia, Muslim countries and some European countries where English is less known. Do they have keyboards in their native language? I mean are the keyboard directly manufactured in their native language. Or do they use some kind of keyboard mapping softwares to acheive the task. I've been searching in Google images to have a glance at their computers but didn't find any real key pads for computers/smartphones. If they have some non-English keyboard. Then how would they type web URLs? URLs possible in other languages also? If they have to type English URLs then it also means that they need to know English. I've seen in some movies that they have all their softwares, windows have text in their native language. How do they have some different language? I feel lost & confused. If you have any screenshots / pics of such non-english computer please post. I want to see one.

  Read the article

• How do I connect remotely to SQL Server from Windows client?

  - by humble_coder

  Hi All, Having a bit of an issue connecting to SQL SERVER remotely from Windows. I've verified that all of my settings are correct via SQL SERVER MANAGEMENT STUDIO EXPRESS and SQL SERVER CONFIGURATION MANAGER. I can connect remotely using ODBC drivers from other OSes (e.g. OS X, Linux, etc). However, when I connect with the same credentials from a remote Windows machine using "SQL SERVER" as the driver I am told that the system cannot connect. I've tried creating an ODBC Data Source and I get the same error: Connection failed: SQLState: '01000' SQL Server Error: 14 [Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]ConnectionOpen(InvalidInstance()). Connection failed: SQLState: '08001' SQL Server Error: 14 [Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]Invalid Connection From the non-windows machines I can use the IP address of the SQL Server just fine. However, on the remote Windows machine, neither IP address nor named instance works. FYI, I can create an ODBC Data Source using the named instance on the machine actually running the SQL Server (but this is, of course, nothing special -- just proof that it isn't completely hosed). One interesting note: If I use SQL STUDIO 2005 from a Windows client machine, I can use the IP address to connect remotely. Still, the whole reason I bring this up is because I need to use a software package I've written to connect to SQL Server remotely from Windows machines as well. Previously the solution was only needed to xfer data from SQL Server into a PostGRES or MySQL database on non-Windows machines (due to DBA preference). However, now they also want to move the data from the legacy software to MySQL even on Windows. Any assistance would be most appreciated. Feel free to provide a full example connection string. Best

  Read the article

• What Logs / Process Stats to monitor on a Ubuntu FTP server?

  - by Adam Salkin

  I am administering a server with Ubuntu Server which is running pureFTP. So far all is well, but I would like to know what I should be monitoring so that I can spot any potential stability and security issues. I'm not looking for sophisticated software, more an idea of what logs and process statistics are most useful for checking on the health of the system. I'm thinking that I can look at various parameters output from the "ps" command and compare to see if I have things like memory leaks. But I would like to know what experienced admins do. Also, how do I do a disk check so that when I reboot, I don't get a message saying something like "disk not checked for x days, forcing check" which delays the reboot? I assume there is command that I can run as a cron job late at night. How often should it be run? What things should I be looking at to spot intrusion attempts? The only shell access is SSH on a non-standard port through UFW firewall, and I regularly do a grep on auth.log for "Fail" or "Invalid". Is there anything else I should look at? I was logging the firewall (UFW) but I have very few open ports (FTP and SSH on a non standard port) so looking at lists of IP's that have been blocked did not seem useful. Many thanks

  Read the article

• Are email addresses mandatory for Windows 8 login names?

  - by Cedric Martin

  I've got a computer running Windows 8 and in the user accounts I can see four accounts (they're in french, here's a rough translation): [email protected] / administrator Veronique YYY / [email protected] ASP.NET Machine Account / local account guest account / the guest account is desactivated I've got several questions but they're all related to email addresses and login names / accounts. Are email addresses mandatory for Windows 8 login names? Can you mix live and non-live user accounts on a Windows 8 system? Is it possible to have a live Windows 8 user account which is not using a @live.xx email address? Is it possible to have a non-live Windows 8 user account which is using a @live.xx email address? If the gmail.com email address of the admin is not a live Windows 8 account, does this mean I can create a "fake" email and use that as the email of a new Windows 8 account? Basically I don't understand very well why there are email addresses displayed on the login screen and why there are both @live.xx and @gmail.com email addresses on the same system and answer to the questions I asked above may help me understand a bit better what is going on (I'm coming from a Linux / OS X background. I literally haven't used Windows in more than a decade).

  Read the article

• Windows Server 2008 R2 creating a multi-year client certificate using the IIS certsrv page while deploying SSTP VPN

  - by Warren P

  I am trying to follow instructions on Technet about deploying a Standard (non-enterprise) SSTP based VPN) that were originally written for Server 2008, but I am using Server 2008 R2, I have gotten as far as the part where it asks you to create a request a Server Authentication certificate. I have deployed IIS, and Active Directory Certificate Services, and chose "Standalone" and "Standard" (non-enterprise) Certificate Authority because I don't have an OID and don't think I should have to get one for a simple deployment of SSTP. The resulting certificates made by the Certification Authority "Issue" command, only have a 1 year period of validity, I want a multi-year certificate. At no point in this process is there any way to input this information unless it's through the Attributes text input area on the Advance Certificate Request page, which appears to be generated using an old ActiveX control, which means I can only do this using the workarounds in the article that I linked at the top, and only using Internet Explorer. Update:: It may be that this question is pointless since self-signed keys do not appear to work, when I try them, using Windows 8 as the VPN client. The problem is that the keys that are self-created by the technique shown here do not have any Certificate Revocation Server URLs and so you get an error "The revocation function was unable to check revocation", and the VPN connection fails.

  Read the article

< Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >