Search Results

Search found 10107 results on 405 pages for 'remote backups'.

Page 138/405 | < Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >

• Windows Home Server 2011, No disks "suitable for a backup destination"

  - by Scott Beeson

  I recently installed Windows Home Server 2011 and love it. However, when I try to set up server backups, it says no suitable disks are available. Initially, before I set up my RAID, it found one of my twin drives and said it would work. Once I set up the mirroring, that one is no longer available (obviously). However, I have an internal SATA 1TB drive and an external USB2.0 1TB drive hooked up. Both are recognized by Disk Management. WHS11 still says nothing suitable for backups. The two drives details are as follows: Edit to clarify: The system partition is on Disk 0, not listed below. The two below are the two that SHOULD be available for system backups. Disk 1: Dynamic "Data" (D:) 931.51 GB NTFS, Healthy Disk 3: Basic 200 MB Healthy (EFI System Partition) "Backup" 930.66 GB NTFS, Healthy (Primary Partition) What's a bit odd is that in Disk Management the "Backup" volume does not show a drive letter, even though I assigned Z: (which is reflected in "My Computer". I also cannot make this a dynamic disk as it says it's unsupported by the device.

  Read the article

• Hard Disk based storage library

  - by Ryan M.

  We have a Tandberg T24 tape device to handle all of our long term backups right now. We decided that we're not backing up nearly everything that we would like to and that we still have a lot of vulnerabilities. To get to where we want to be, we're going to have to back up a lot more servers than we're currently doing. All of our internal servers have some sort of directly attached drive (I.e. LaCie Raid box or a simple portable hard drive) doing backups, but what we want to do is get those backups off-site. The current tape drive is directly attached via SCSI to a Windows Server 2008 File Server. So to back up anything to tape, it has to be funneled through the File Server. With the current increase that we have planned, I don't think that funneling everything through the File Server is the right course of action and I'm thinking that maybe a second backup device would be more appropriate. I would like your input on a couple of ideas. 1) Doing HDD instead of tape. Tape is hard to deal with. We have a regular rotation cycle, so they don't need years and years of shelf life, so I'm wondering if something HDD-based would be better. 2) Something accessible over the network. Instead of having the device directly attached to one specific machine, have it available to all the servers over the network. Our File Server is a 12-disk raid 6 set up.. I was thinking something like that, but with no raid involved, all disks are stand alone so they can be used/installed/removed on an individual basis. Does any such thing exist? Thanks for your ideas. I'm really interested to hear about some of the solutions you guys are using..

  Read the article

• Backing up 80G hard drive 1G per day

  - by barrycarter

  I want to securely backup my 80G HD, but doing a complete backup takes forever and slows down my machine, so I want to backup just 1G per day. Details: % First hurdle: on the first day, I want to backup the "first" 1G of the hard drive. Of course, there really is no "first" 1G on a hard drive. % After 80 days, I'll have my whole HD backed up... assuming none of my files ever change, which of course they do. So the backup plan/program must also catch file creation/changes as they come along. % The backups must be consistent, in that I can restore my system by restoring the backups sequentially. In other words, "dd if=/harddrive" probably won't work. % The backups should encrypt file contents AND names, but I don't see this as a major hurdle. % Once the backup has backed up everything (even changed files), it can re-backup the first 1G on my hard drive. Even though this backup is redundant, that's OK, because I always want to be backing up something (eg, if I'm backing up to optical media, the older media might start going corrupt). Is there a magic backup plan/program that does this? In reality, I want to do this for multiple machines with multiple drives each, but think that solving the above will solve the general case.

  Read the article

• Is there such a thing as a file hosted container which deduplicates data held within?

  - by Mallow

  Background I have backups of a website which stores all of it's data into a single file. This file is several gigs large and I have many different backups of this file. Most of the data within is mostly the same plus whatever was added or changed to it. I want to keep all the concurrent backups I've made through the years in case I find a horrible surprise of data corruption along the line. However storing a 10gig file every month gets expensive. Seeking Solution I've often thought about different ways of alleviating this problem. One thought that comes up very often combines the idea of a duplicating file system which doesn't require it's own partitioned volume on a hard drive. Something like what truecrypt does, what it calls, "file hosted containers" which when using the truecrypt program allows you to mount and dismount that volume as a regular hard drive. Question Is there a virtual hard drive mounter which uses file-based container which uses data deduplicaiton file system? (This question is a little awkward to put into words, if you have a better idea on how to ask this question please feel free to help out.)

  Read the article

• Problem adding "Network Policy and Access Services" role in Server 2008

  - by Django Reinhardt

  We are encountering an Error Code 0x80070643 when attempting to add the "Network Policy and Access Services" role on a fresh Windows Server 2008 R2 installation. Is there a known solution for this problem? Here is what information we have available so far: From ServerManager.log... 2504: 2009-11-23 11:12:01.712 [CBS] installing 'IAS NT Service RasServerAll RasRoutingProtocols ' ... 2504: 2009-11-23 11:12:01.911 [CBS] ...parents that will be auto-installed: 'RasServer ' 2504: 2009-11-23 11:12:01.912 [CBS] ...default children to turn-off: '<none>' 2504: 2009-11-23 11:12:01.924 [CBS] ...current state of 'IAS NT Service': p: Staged, a: Staged, s: UninstallRequested 2504: 2009-11-23 11:12:01.924 [CBS] ...setting state of 'IAS NT Service' to 'InstallRequested' 2504: 2009-11-23 11:12:01.935 [CBS] ...current state of 'RasServerAll': p: Staged, a: Staged, s: UninstallRequested 2504: 2009-11-23 11:12:01.935 [CBS] ...setting state of 'RasServerAll' to 'InstallRequested' 2504: 2009-11-23 11:12:01.946 [CBS] ...current state of 'RasRoutingProtocols': p: Staged, a: Staged, s: UninstallRequested 2504: 2009-11-23 11:12:01.946 [CBS] ...setting state of 'RasRoutingProtocols' to 'InstallRequested' 2504: 2009-11-23 11:12:01.956 [CBS] ...current state of 'RasServer': p: Staged, a: Staged, s: UninstallRequested 2504: 2009-11-23 11:12:01.956 [CBS] ...setting state of 'RasServer' to 'InstallRequested' 2504: 2009-11-23 11:12:01.967 [CBS] ...'IAS NT Service' : applicability: Applicable 2504: 2009-11-23 11:12:01.977 [CBS] ...'RasServerAll' : applicability: Applicable 2504: 2009-11-23 11:12:01.987 [CBS] ...'RasRoutingProtocols' : applicability: Applicable 2504: 2009-11-23 11:12:01.998 [CBS] ...'RasServer' : applicability: Applicable 2504: 2009-11-23 11:12:02.906 [CbsUIHandler] Initiate: 2504: 2009-11-23 11:12:02.906 [InstallationProgressPage] Installing... 2504: 2009-11-23 11:12:54.311 [CbsUIHandler] Error: -2147023293 : 2504: 2009-11-23 11:12:54.313 [CbsUIHandler] Terminate: 2504: 2009-11-23 11:12:54.316 [InstallationProgressPage] Verifying installation... 2504: 2009-11-23 11:12:54.326 [CBS] ...done installing 'IAS NT Service RasServerAll RasRoutingProtocols '. Status: -2147023293 (80070643) 2504: 2009-11-23 11:12:54.329 [NPAS] Skipped configuration of 'Network Policy Server' because install operation failed. 2504: 2009-11-23 11:12:54.330 [NPAS] Skipped configuration of 'Remote Access Service' because install operation failed. 2504: 2009-11-23 11:12:54.330 [NPAS] Skipped configuration of 'Routing' because install operation failed. 2504: 2009-11-23 11:12:54.330 [Provider] [STAT] ---- CBS Session Consolidation ----- [STAT] For 'Network Policy Server', 'Remote Access Service', 'Routing'[STAT] installation(s) took '52.616957' second(s) total. [STAT] Configuration(s) took '0.0004948' second(s) total. [STAT] Total time: '52.6174518' second(s). From System Event Viewer... Log Name: System Source: Service Control Manager Date: 23/11/2009 11:12:23 Event ID: 7023 Task Category: None Level: Error Keywords: Classic User: N/A Computer: Av7Analytics Description: The Network Policy Server service terminated with the following error: %%-2147013892 Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" /> <EventID Qualifiers="49152">7023</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8080000000000000</Keywords> <TimeCreated SystemTime="2009-11-23T11:12:23.653578500Z" /> <EventRecordID>1317</EventRecordID> <Correlation /> <Execution ProcessID="468" ThreadID="2308" /> <Channel>System</Channel> <Computer>Av7Analytics</Computer> <Security /> </System> <EventData> <Data Name="param1">Network Policy Server</Data> <Data Name="param2">%%-2147013892</Data> </EventData> </Event> From Setup Event Viewer... Log Name: Setup Source: Microsoft-Windows-ServerManager Date: 23/11/2009 11:12:56 Event ID: 1616 Task Category: None Level: Error Keywords: User: AV7ANALYTICS\RenamedAdmin Computer: Av7Analytics Description: Installation failed. Roles: Network Policy and Access Services Error: Attempt to install Network Policy Server failed with error code 0x80070643. Fatal error during installation Error: Attempt to install Remote Access Service failed with error code 0x80070643. Fatal error during installation Error: Attempt to install Routing failed with error code 0x80070643. Fatal error during installation The following role services were not installed: Network Policy Server Routing and Remote Access Services Remote Access Service Routing Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-ServerManager" Guid="{8C474092-13E4-430E-9F06-5B60A529BF38}" /> <EventID>1616</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x4000000000000000</Keywords> <TimeCreated SystemTime="2009-11-23T11:12:56.046431200Z" /> <EventRecordID>115</EventRecordID> <Correlation /> <Execution ProcessID="2504" ThreadID="2344" /> <Channel>Setup</Channel> <Computer>Av7Analytics</Computer> <Security UserID="S-1-5-21-2753803390-1569373846-1208217686-500" /> </System> <UserData> <EventXML xmlns:auto-ns3="http://schemas.microsoft.com/win/2004/08/events" xmlns="Event_NS"> <message> Roles: Network Policy and Access Services Error: Attempt to install Network Policy Server failed with error code 0x80070643. Fatal error during installation Error: Attempt to install Remote Access Service failed with error code 0x80070643. Fatal error during installation Error: Attempt to install Routing failed with error code 0x80070643. Fatal error during installation The following role services were not installed: Network Policy Server Routing and Remote Access Services Remote Access Service Routing </message> <identifiers>14, 206, 207, 208, 205</identifiers> </EventXML> </UserData> Thanks in advance for any help. It's quite shocking that we're already having problems with Microsoft's "latest and greatest".

  Read the article

• Five geeky things you must do with your Android Smartphone

  - by Gopinath

  Android is the Windows of next generation. Its open, free, widely adopted and smart enough to outsmart Apple’s iOS. It’s a stolen product and cheap imitation of iOS, but Steve Job’s once quoted saying good artists copy and great artists steal. Alright, this post is not about Android vs iOS or is it really stolen or not. Android is a great OS for mobile devices and it lets you do amazing through mobiles.  In this post I want to write about the geeky things we can do with an Android Smartphone. Control your computer using mobile Assume that it is a lazy weekend and you are on a couch watching movies on a laptop which is a meter away. Now you want to adjust volume or skip a scene/song. How to control your laptop without moving out of couch? Just install Universal Remote free app on your smartphone and start control your computer using phone. Universal Remove app controls computers over Wifi or Bluetooth networks with dedicated remote controls for various media players and applications like YouTube, VLC & Spotify.  The application is very easy to use and works amazingly well in controlling computers. Few of the remote controls provided in the app are – Mouse, Keyboard, Media Controls, Power, Start, Windows Media Player, VLC Player,  YouTube. There is also paid version of this app with additional remotes, but for most of the users Free version is good enough. Stream YouTube videos playing on you mobile to computer You can stream YouTube videos playing on your mobile to computer/smart tv. This is something similar to Apple’s most popular AirPlay feature, but works only with YouTube videos. To start streaming videos install Google’s YouTube Remote on your smartphone, open youtube.com/leanback on your computer  and pair up mobile with computer. Once the pairing is done, videos played on YouTube Remote app will be streamed on to your computer. Access your mobile using any web browser – send/receive SMS, view photos/call logs, etc. Want to control your mobile phone using a computer? Install AirDroid app on your phone and start controlling your phone using computer browser – send and receive messages, view call logs, play music, upload/download files, edit contacts and many more. At times it’s lot of fun to access mobile using a big screen devices like laptops. Launch a webpage on your mobile browser using your computer With Google Chrome to Phone installed on your computer and mobile, you can send links and other information from Chrome browser to your Android device. With a click on Chrome browser, the current webpage of Chrome browser will be automatically launched on Android device. This is very handy when you want to send links, send driving direction to mobile using Google Maps and launch phone dialer with number selected on webpage. Install Apps on mobile using computer To install apps on your smartphone you really don’t need to touch it. Open any web browser, sing in to Google Play with your Google id that is associated with smartphone and start installing apps on to your phone right from the browser. As you browse apps on Google Play store, you find Install button and all you need to do is to just click Install. Google will automatically installs app on your mobile within few seconds.

  Read the article

• The Power to Control Power

  - by speakjava

  I'm currently working on a number of projects using embedded Java on the Raspberry Pi and Beagle Board.  These are nice and small, so don't take up much room on my desk as you can see in this picture. As you can also see I have power and network connections emerging from under my desk.  One of the (admittedly very minor) drawbacks of these systems is that they have no on/off switch.  Instead you insert or remove the power connector (USB for the RasPi, a barrel connector for the Beagle).  For the Beagle Board this can potentially be an issue; with the micro-SD card located right next to the connector it has been known for people to eject the card when trying to power off the board, which can be quite serious for the hardware. The alternative is obviously to leave the boards plugged in and then disconnect the power from the outlet.  Simple enough, but a picture of underneath my desk shows that this is not the ideal situation either. This made me think that it would be great if I could have some way of controlling a mains voltage outlet using a remote switch or, even better, from software via a USB connector.  A search revealed not much that fit my requirements, and anything that was close seemed very expensive.  Obviously the only way to solve this was to build my own.Here's my solution.  I decided my system would support both control mechanisms (remote physical switch and USB computer control) and be modular in its design for optimum flexibility.  I did a bit of searching and found a company in Hong Kong that were offering solid state relays for 99p plus shipping (£2.99, but still made the total price very reasonable).  These would handle up to 380V AC on the output side so more than capable of coping with the UK 240V supply.  The other great thing was that being solid state, the input would work with a range of 3-32V and required a very low current of 7.5mA at 12V.  For the USB control an Arduino board seemed the obvious low-cost and simple choice.  Given the current requirments of the relay, the Arduino would not require the additional power supply and could be powered just from the USB.Having secured the relays I popped down to Homebase for a couple of 13A sockets, RS for a box and an Arduino and Maplin for a toggle switch.  The circuit is pretty straightforward, as shown in the diagram (only one output is shown to make it as simple as possible).  Originally I used a 2 pole toggle switch to select the remote switch or USB control by switching the negative connections of the low voltage side.  Unfortunately, the resistance between the digital pins of the Arduino board was not high enough, so when using one of the remote switches it would turn on both of the outlets.  I changed to a 4 pole switch and isolated both positive and negative connections. IMPORTANT NOTE: If you want to follow my design, please be aware that it requires working with mains voltages.  If you are at all concerned with your ability to do this please consult a qualified electrician to help you.It was a tight fit, especially getting the Arduino in, but in the end it all worked.  The completed box is shown in the photos. The remote switch was pretty simple just requiring the squeezing of two rocker switches and a 9V battery into the small RS supplied box.  I repurposed a standard stereo cable with phono plugs to connect the switch box to the mains outlets.  I chopped off one set of plugs and wired it to the rocker switches.  The photo shows the RasPi and the Beagle board now controllable from the switch box on the desk. I've tested the Arduino side of things and this works fine.  Next I need to write some software to provide an interface for control of the outlets.  I'm thinking a JavaFX GUI would be in keeping with the total overkill style of this project.

  Read the article

• Trying to configure HWIC-3G-HSPA

  - by user1174838

  I'm trying to configure a couple of Cisco 1941 routes. The are both identical routers. Each as a HWIC-1T (Smart Serial interface) and a HWIC-3G-HSPA 3G interface. These routers are to be sent to remote sites. We have connectivity to one of the sites but if remote site A gors down we lose connectivity to remote site B. The HWIC-1T is the primary WAN interface using frame relay joining the two remote sites We want the HWIC-3G-HSPA to be usable for direct connectivity from head office to remote site B, and also the HWIC-3G-HSPA is do be used for comms between the remote sites when the frame relay is down (happens quite a bit). I initialy tried to do dynamic routing using EIGRP however in my lab setup of laptop - 1941 - 1941 - laptop, I was unable to get end to end connectivity. I later settled on static routing and have got end to end connectivity but only over frame relay, not the HWIC-3G-HSPA. The sanitized running config for remote site A: version 15.1 service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption service udp-small-servers service tcp-small-servers ! hostname remoteA ! boot-start-marker boot-end-marker ! ! logging buffered 51200 warnings enable secret 5 censored ! no aaa new-model clock timezone wst 8 0 ! no ipv6 cef ip source-route ip cef ! ip domain name yourdomain.com multilink bundle-name authenticated ! chat-script gsm "" "ATDT*98*1#" TIMEOUT 30 "CONNECT" ! username admin privilege 15 secret 5 censored ! controller Cellular 0/1 ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.2.5 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0 ip address 10.1.1.2 255.255.255.252 encapsulation frame-relay cdp enable frame-relay interface-dlci 16 frame-relay lmi-type ansi ! interface Cellular0/1/0 ip address negotiated encapsulation ppp dialer in-band dialer idle-timeout 2147483 dialer string gsm dialer-group 1 async mode interactive ppp chap hostname censored ppp chap password 7 censored cdp enable ! interface Cellular0/1/1 no ip address encapsulation ppp ! interface Dialer0 no ip address ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip route 0.0.0.0 0.0.0.0 Serial0/0/0 210 permanent ip route 0.0.0.0 0.0.0.0 Cellular0/1/0 220 permanent ip route 172.31.2.0 255.255.255.0 Cellular0/1/0 permanent ip route 192.168.3.0 255.255.255.0 10.1.1.1 permanent ip route 192.168.3.0 255.255.255.0 Cellular0/1/0 210 permanent ! access-list 1 permit any dialer-list 1 protocol ip list 1 ! control-plane ! line con 0 logging synchronous login local line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line 0/1/0 exec-timeout 0 0 script dialer gsm login modem InOut no exec transport input all rxspeed 7200000 txspeed 5760000 line 0/1/1 no exec rxspeed 7200000 txspeed 5760000 line vty 0 4 access-class 23 in privilege level 15 password 7 censored login local transport input all line vty 5 15 access-class 23 in privilege level 15 password 7 censored login local transport input all line vty 16 1370 password 7 censored login transport input all ! scheduler allocate 20000 1000 end The sanitized running config for remote site B: version 15.1 service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption service udp-small-servers service tcp-small-servers ! hostname remoteB ! boot-start-marker boot-end-marker ! logging buffered 51200 warnings enable secret 5 censored ! no aaa new-model clock timezone wst 8 0 ! no ipv6 cef ip source-route ip cef ! no ip domain lookup ip domain name yourdomain.com multilink bundle-name authenticated ! chat-script gsm "" "ATDT*98*1#" TIMEOUT 30 "CONNECT" username admin privilege 15 secret 5 censored ! controller Cellular 0/1 ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.3.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0 ip address 10.1.1.1 255.255.255.252 encapsulation frame-relay clock rate 2000000 cdp enable frame-relay interface-dlci 16 frame-relay lmi-type ansi frame-relay intf-type dce ! interface Cellular0/1/0 ip address negotiated encapsulation ppp dialer in-band dialer idle-timeout 2147483 dialer string gsm dialer-group 1 async mode interactive ppp chap hostname censored ppp chap password 7 censored ppp ipcp dns request cdp enable ! interface Cellular0/1/1 no ip address encapsulation ppp ! interface Dialer0 no ip address ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip route 0.0.0.0 0.0.0.0 Serial0/0/0 210 permanent ip route 0.0.0.0 0.0.0.0 Cellular0/1/0 220 permanent ip route 172.31.2.0 255.255.255.0 Cellular0/1/0 permanent ip route 192.168.2.0 255.255.255.0 10.1.1.2 permanent ip route 192.168.2.0 255.255.255.0 Cellular0/1/0 210 permanent ! kron occurrence PING in 1 recurring policy-list ICMP ! access-list 1 permit any dialer-list 1 protocol ip list 1 ! control-plane ! line con 0 logging synchronous login local line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line 0/1/0 exec-timeout 0 0 script dialer gsm login modem InOut no exec transport input all rxspeed 7200000 txspeed 5760000 line 0/1/1 no exec rxspeed 7200000 txspeed 5760000 line vty 0 4 access-class 23 in privilege level 15 password 7 censored login transport input all line vty 5 15 access-class 23 in privilege level 15 password 7 censored login transport input all line vty 16 1370 password 7 censored login transport input all ! scheduler allocate 20000 1000 end The last problem I'm having is the 3G interfaces go down after only a few minutes of inactivity. I've tried using kron to ping the local HWIC-3G-HSPA interface (cellular 0/1/0) every minute but that hasn't been successful. Manually pinging the IP assigned (by the telco) to ce0/1/0 does bring the interface up. Any ideas? Thanks

  Read the article

• Nagios plugin script not working as expected

  - by Linker3000

  I have modified an off-the-shelf Nagios plugin perl script to (in theory) return a one or zero according to the existence, or not, of a file on a remote linux server. The script runs a remote ssh session and logs in as the nagios user. The remote linux servers have private keys setup for that user, and on the bash command line the script works as expected, but when run as a plugin it always returns '1' (true) even if the file does not exist. Some help with the logic or a comment on why things are not working as expected within Nagios would be appreciated. I'd prefer to use this ssh login method rather than having to install nrpe on all the linux servers. To run from a command line (assuming remote server has a user called nagios with a valid private key): ./check_reboot_required -e ssh -H remote-servers-ip-addr -p 'filename-to-check' -v Ta. #! /usr/bin/perl -w # # # License Information: # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. # ############################################################################ use POSIX; use strict; use Getopt::Long; use lib "/usr/lib/nagios/plugins" ; use vars qw($host $opt_V $opt_h $opt_v $verbose $PROGNAME $pattern $opt_p $mmin $opt_e $opt_t $opt_H $status $state $msg $msg_q $MAILQ $SHELL $device $used $avail $percent $fs $blocks $CMD $RMTOS); use utils qw(%ERRORS &print_revision &support &usage ); sub print_help (); sub print_usage (); sub process_arguments (); $ENV{'PATH'}=''; $ENV{'BASH_ENV'}=''; $ENV{'ENV'}=''; $PROGNAME = "check_reboot_required"; Getopt::Long::Configure('bundling'); $status = process_arguments(); if ($status){ print "ERROR: processing arguments\n"; exit $ERRORS{'UNKNOWN'}; } $SIG{'ALRM'} = sub { print ("ERROR: timed out waiting for $CMD on $host\n"); exit $ERRORS{'WARNING'}; }; $host = $opt_H; $pattern = $opt_p; print "Pattern >" . $pattern . "< " if $verbose; alarm($opt_t); #$CMD = "/usr/bin/find " . $pattern . " -type f 2>/dev/null| /usr/bin/wc -l"; $CMD = "[ -f " . $pattern . " ] && echo 1 || echo 0"; alarm($opt_t); ## get cmd output from remote system if (! open (OUTPUT, "$SHELL $host $CMD|" ) ) { print "ERROR: could not open $CMD on $host\n"; exit $ERRORS{'UNKNOWN'}; } my $perfdata = ""; my $state = "3"; my $msg = "Indeterminate result"; # only first line is relevant in this iteration. while (<OUTPUT>) { my $result = chomp($_); $msg = $result; print "Shell returned >" . $result . "< length is " . length($result) . " " if $verbose; if ( $result == 1 ) { $msg = "Reboot required (NB: Result still not accurate)" . $result ; $state = $ERRORS{'WARNING'}; last; } elsif ( $result == 0 ) { $msg = "No reboot required (NB: Result still not accurate) " . $result ; $state = $ERRORS{'OK'}; last; } else { $msg = "Output received, but it was neither a 1 nor a 0" ; last; } } close (OUTPUT); print "$msg | $perfdata\n"; exit $state; ##################################### #### subs sub process_arguments(){ GetOptions ("V" => \$opt_V, "version" => \$opt_V, "v" => \$opt_v, "verbose" => \$opt_v, "h" => \$opt_h, "help" => \$opt_h, "e=s" => \$opt_e, "shell=s" => \$opt_e, "p=s" => \$opt_p, "pattern=s" => \$opt_p, "t=i" => \$opt_t, "timeout=i" => \$opt_t, "H=s" => \$opt_H, "hostname=s" => \$opt_H ); if ($opt_V) { print_revision($PROGNAME,'$Revision: 1.0 $ '); exit $ERRORS{'OK'}; } if ($opt_h) { print_help(); exit $ERRORS{'OK'}; } if (defined $opt_v ){ $verbose = $opt_v; } if (defined $opt_e ){ if ( $opt_e eq "ssh" ) { if (-x "/usr/local/bin/ssh") { $SHELL = "/usr/local/bin/ssh"; } elsif ( -x "/usr/bin/ssh" ) { $SHELL = "/usr/bin/ssh"; } else { print_usage(); exit $ERRORS{'UNKNOWN'}; } } elsif ( $opt_e eq "rsh" ) { $SHELL = "/usr/bin/rsh"; } else { print_usage(); exit $ERRORS{'UNKNOWN'}; } } else { print_usage(); exit $ERRORS{'UNKNOWN'}; } unless (defined $opt_t) { $opt_t = $utils::TIMEOUT ; # default timeout } unless (defined $opt_H) { print_usage(); exit $ERRORS{'UNKNOWN'}; } return $ERRORS{'OK'}; } sub print_usage () { print "Usage: $PROGNAME -e <shell> -H <hostname> -p <directory/file pattern> [-t <timeout>] [-v verbose]\n"; } sub print_help () { print_revision($PROGNAME,'$Revision: 0.1 $'); print "\n"; print_usage(); print "\n"; print " Checks for the presence of a 'reboot-required' file on a remote host via SSH or RSH\n"; print "-e (--shell) = ssh or rsh (required)\n"; print "-H (--hostname) = remote server name (required)"; print "-p (--pattern) = File pattern for find command (default = /var/run/reboot-required)\n"; print "-t (--timeout) = Plugin timeout in seconds (default = $utils::TIMEOUT)\n"; print "-h (--help)\n"; print "-V (--version)\n"; print "-v (--verbose) = debugging output\n"; print "\n\n"; support(); }

  Read the article

• How can I get TFS2010 to run MSDEPLOY for me through MSBUILD?

  - by Simon_Weaver

  There is an excellent PDC talk available here which describes the new MSDEPLOY features in Visual Studio 2010 - as well as how to deploy an application within TFS. You can use MSBUILD within TFS2010 to call through to MSDEPLOY to deploy your package to IIS. This is done by means of parameters to MSBUILD. The talk explains some of the command line parameters such as : /p:DeployOnBuild /p:DeployTarget=MsDeployPublish /p:CreatePackageOnPublish=True /p:MSDeployPublishMethod=InProc /p:MSDeployServiceURL=localhost /p:DeployIISAppPath="Default Web Site" But where is the documentation for this - I can't find any? I've been spending all day trying to get this to work and can't quite get it right and keep ending up with various errors. If I run the package's cmd file it deploys perfectly. But I want to get the whole deployment running through msbuild using these arguments and not a separate call to msdeploy or running the package .cmd file. How can I do this? PS. Yes I do have the Web Deployment Agent Service running. I also have the management service running under IIS. I've tried using both. Args I'm using : /p:DeployOnBuild=True /p:DeployTarget=MsDeployPublish /p:Configuration=Release /p:CreatePackageOnPublish=True /p:DeployIisAppPath=staging.example.com /p:MsDeployServiceUrl=https://staging.example.com:8172/msdeploy.axd /p:AllowUntrustedCertificate=True giving me : C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\Web\Microsoft.Web.Publishing.targets (2660): VsMsdeploy failed.(Remote agent (URL https://staging.example.com:8172/msdeploy.axd?site=staging.example.com) could not be contacted. Make sure the remote agent service is installed and started on the target computer.) Error detail: Remote agent (URL https://staging.example.com:8172/msdeploy.axd?site=staging.example.com) could not be contacted. Make sure the remote agent service is installed and started on the target computer. An unsupported response was received. The response header 'MSDeploy.Response' was '' but 'v1' was expected. The remote server returned an error: (401) Unauthorized.

  Read the article

• C# Ignore certificate errors?

  - by JL

  I am getting the following error during a web service request to a remote web service: Could not establish trust relationship for the SSL/TLS secure channel. --- System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure. Is there anyway to ignore this error, and continue. It seems the remote certificate is not signed. The site I connect to is www.czebox.cz - so feel free to visit the site, and notice even browsers through security exceptions. Thanks

  Read the article

• Visual Studio 2010 Web Deployment

  - by Cranialsurge

  I am trying to use VS2010's 1-Click Publish feature to deploy a test site from my laptop to my server. I have the firewall turned off on both machines and the MS Deployment Service is up and running on both my laptop and the server. However when I try and publish from VS2010 on my laptop I get the following error Error 1 Web deployment task failed.(Remote agent (URL https://192.168.1.181/:8172/msdeploy.axd?site=LocationsTest) could not be contacted. Make sure the remote agent service is installed and started on the target computer.) The requested resource does not exist, or the requested URL is incorrect. Error details: Remote agent (URL https://192.168.1.181/:8172/msdeploy.axd?site=LocationsTest) could not be contacted. Make sure the remote agent service is installed and started on the target computer. An unsupported response was received. The response header 'MSDeploy.Response' was '' but 'v1' was expected. The remote server returned an error: (404) Not Found. 0 0 Test.Web Any idea what I am doing wrong here ?

  Read the article

• Using paired certificates with urllib2

  - by Ned Batchelder

  I need to create a secure channel between my server and a remote web service. I'll be using HTTPS with a client certificate. I'll also need to validate the certificate presented by the remote service. How can I use my own client certificate with urllib2? What will I need to do in my code to ensure that the remote certificate is correct?

  Read the article

• NameNotFoundException when calling a EJB in Weblogic 10.3

  - by XpiritO

  First of all, I'd like to underline that I've already read other posts in StackOverflow (example) with similar questions, but unfortunately I didn't manage to solve this problem with the answers I saw on those posts. I have no intention to repost a question that has already been answered, so if that's the case, I apologize and I'd be thankful to whom points out where the solution is posted. Here is my question: I'm trying to deploy an EJB in WebLogic 10.3.2. The purpose is to use a specific WorkManager to execute work produced in the scope of this component. With this in mind, I've set up a WorkManager (named ResponseTimeReqClass-0) on my WebLogic configuration, using the web-based interface (Environment Work Managers New). Here is a screenshot: Here is my session bean definition and descriptors: OrquestratorRemote.java package orquestrator; import javax.ejb.Remote; @Remote public interface OrquestratorRemote { public void initOrquestrator(); } OrquestratorBean.java package orquestrator; import javax.ejb.Stateless; import com.siemens.ecustoms.orchestration.eCustomsOrchestrator; @Stateless(name = "OrquestratorBean", mappedName = "OrquestratorBean") public class OrquestratorBean implements OrquestratorRemote { public void initOrquestrator(){ eCustomsOrchestrator orquestrator = new eCustomsOrchestrator(); orquestrator.run(); } } META-INF\ejb-jar.xml <?xml version='1.0' encoding='UTF-8'?> <ejb-jar xmlns='http://java.sun.com/xml/ns/javaee' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' metadata-complete='true'> <enterprise-beans> <session> <ejb-name>OrquestradorEJB</ejb-name> <mapped-name>OrquestratorBean</mapped-name> <business-remote>orquestrator.OrquestratorRemote</business-remote> <ejb-class>orquestrator.OrquestratorBean</ejb-class> <session-type>Stateless</session-type> <transaction-type>Container</transaction-type> </session> </enterprise-beans> <assembly-descriptor></assembly-descriptor> </ejb-jar> META-INF\weblogic-ejb-jar.xml (I've placed work manager configuration in this file, as I've seen on a tutorial on the internet) <weblogic-ejb-jar xmlns="http://www.bea.com/ns/weblogic/90" xmlns:j2ee="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-ejb-jar.xsd"> <weblogic-enterprise-bean> <ejb-name>OrquestratorBean</ejb-name> <jndi-name>OrquestratorBean</jndi-name> <dispatch-policy>ResponseTimeReqClass-0</dispatch-policy> </weblogic-enterprise-bean> </weblogic-ejb-jar> I've compiled this into a JAR and deployed it on WebLogic, as a library shared by administrative server and all cluster nodes on my solution (it's in "Active" state). As I've seen in several tutorials and examples, I'm using this code on my application, in order to call the bean: InitialContext ic = null; try { Hashtable<String,String> env = new Hashtable<String,String>(); env.put(Context.INITIAL_CONTEXT_FACTORY, "weblogic.jndi.WLInitialContextFactory"); env.put(Context.PROVIDER_URL, "t3://localhost:7001"); ic = new InitialContext(env); } catch(Exception e) { System.out.println("\n\t Didn't get InitialContext: "+e); } // try { Object obj = ic.lookup("OrquestratorBean"); OrquestratorRemote remote =(OrquestratorRemote)obj; System.out.println("\n\n\t++ Remote => "+ remote.getClass()); System.out.println("\n\n\t++ initOrquestrator()"); remote.initOrquestrator(); } catch(Exception e) { System.out.println("\n\n\t WorkManager Exception => "+ e); e.printStackTrace(); } Unfortunately, this don't work. It throws an exception on runtime, as follows: WorkManager Exception = javax.naming.NameNotFoundException: Unable to resolve 'OrquestratorBean'. Resolved '' [Root exception is javax.naming.NameNotFoundException: Unable to resolve 'OrquestratorBean'. Resolved '']; remaining name 'OrquestratorBean' After seeing this, I've even tried changing this line Object obj = ic.lookup("OrquestratorBean"); to this: Object obj = ic.lookup("OrquestratorBean#orquestrator.OrquestratorBean"); but the result was the same runtime exception. Can anyone please help me detecting what am I doing wrong here? I'm having a bad time debugging this, as I don't know how to check out what may be causing this issue... Thanks in advance for your patience and help.

  Read the article

• How to migrate from SVN to GIT Locally

  - by Guilherme

  I'm working on a project that initially used Subversion, but the remote repository was removed and i don't want to use Subversion any more. I want to migrate it to git. There's a way to do it without the remote repository, keeping all revisions history (without doing a git init .)? I've already made a subversion to git migration with git-svn with no problems it on other projects, but they were on remote repository and i cannot find any info about migrating it locally.

  Read the article

• git pull not working

  - by dorelal

  I am not using github. We have git setup on our machine. I created a branch from master called experiment. However when I am trying to do git pull I am getting following message. > git pull You asked me to pull without telling me which branch you want to merge with, and 'branch.experiment.merge' in your configuration file does not tell me either. Please specify which branch you want to merge on the command line and try again (e.g. 'git pull <repository> <refspec>'). See git-pull(1) for details. Here is result of git remote show origin > git remote show origin * remote origin Fetch URL: ssh://git.domain.com/var/git/app.git Push URL: ssh://git.domain.com/var/git/app.git HEAD branch: master Remote branches: experiment tracked master tracked Local branches configured for 'git pull': master merges with remote master Local refs configured for 'git push': experiment pushes to experiment (local out of date) master pushes to master (up to date) As I read the message above experiment is mapped to origin/experiment. And my local repository knows that it is out of date. Then why I am not able to do git pull?

  Read the article

• Select and Insert across dblink

  - by Domtar

  I am having a bit of trouble with a select into insert across a dblink in oracle 10. I am using the following statement: INSERT INTO LOCAL.TABLE_1 ( COL1, COL2) SELECT COL1, COL2 FROM REMOTE.TABLE1@dblink s WHERE COL1 IN ( SELECT COL1 FROM WORKING_TABLE) When I run the statement the following is what gets run against the remote server on the DB Link: SELECT /*+ OPAQUE_TRANSFORM */ "COL1", "COL2" FROM "REMOTE"."TABLE1" "S" If I run the select only and do not do the insert into the following is run: SELECT /*+ */ "A1"."COL1" , "A1"."COL2" FROM "REMOTE"."TABLE1" "A1" WHERE "A1"."COL1" = ANY ( SELECT "A2"."COL1" FROM "LOCAL"."TABLE1"@! "A2") The issue is in the insert case the enitre table is being pulled across the dblink and then limited localy which takes a fair bit of time given the table size. Is there any reason adding the insert would change the behavior in this manner?

  Read the article

• Using Amazon's EBS for MySQL hot backup

  - by flybywire

  What are your experiences using Amazons EBS snapshot features for MySql hot backups. I have a database running a batch processing job in ec2. I backup with EBS snapshot. So far the backups looks consistent. But I am afraid they "will stop being consistent as soon as I stop checking" (Uncertainty principle). What are your experiences with backuping relational databases (and mysql in particular) with ebs snapshot?

  Read the article

• Importing already existing git repo with multiple branches and tags into gerrit

  - by Daniel

  I'm trying to import an already existing git repository with multiple branches and tags into gerrit. I'm following the official guide at https://gerrit-review.googlesource.com/Documentation/install-quick.html#_already_existing_project. However, when issuing the push command all the branches and tags, except "master" which I'm currently in, are "prohibited by Gerrit". The output is something like this: user@host:~/my-project$ git push ssh://user@localhost:29418/demo-project *:* [....] * [new branch] master -> master ! [remote rejected] origin/Branch1 -> origin/Branch1 (prohibited by Gerrit) ! [remote rejected] origin/Branch2 -> origin/Branch2 (prohibited by Gerrit) [....] ! [remote rejected] Tag1 -> Tag1 (prohibited by Gerrit) ! [remote rejected] Tag2 -> Tag2 (prohibited by Gerrit) [....] I'm administrator so it shouldn't be an access rights issue.

  Read the article

• Installing Ruby Gems behind a Proxy

  - by jjr2527

  It appears this topic has been covered a few times before, but those solutions have only gotten me so far. I now have my sources properly updated and I am able to query for gems without an error but I keep getting empty results for my searches. I installed rubysspi and copied over the spa.rb file as mentioned in the readme. The readme also suggested using this line which did not work for me based on my install path: ruby -rspa 'C:\Program Files\ruby\gem' list --remote sspi So I switched it to my install directory off the root: ruby -rspa 'C:\ruby\gem' list --remote sspi But that also didn't work so a search for the gem file located it in the bin directory so this command finally worked for me: ruby -rspa 'C:\ruby\bin\gem' list --remote sspi But I got empty results back: *** REMOTE GEMS *** SO I tried other gems and had the same results. Then I listed my gem sources and rubygems is listed as expected. Am I missing something else? c:\ruby>gem sources *** CURRENT SOURCES *** http://rubygems.org

  Read the article

• Qooxdoo REST JSON request problem - unexpected token and then timeout

  - by freiksenet

  Hello! I am learning Qooxdoo framework and I am trying to make it work with a small Django web service. Django webservice just returns JSON data like this: { "name": "Football", "description": "The most popular sport." } Then I use the following code to query that url: var req = new qx.io.remote.Request(url, "GET", "application/json"); req.toggleCrossDomain(); req.addListener("completed", function(e) { alert(e.getContent()); }); req.send(); Unfortunately when I execute the code I get unexpected token error and then request timeouts. Uncaught SyntaxError: Unexpected token : Native.js:91013011 qx.io.remote.RequestQueue[246]: Timeout: transport 248 Native.js:91013011 qx.io.remote.RequestQueue[246]: 5036ms > 5000ms Native.js:91013013 qx.io.remote.Exchange[248]: Timeout: implementation 249 JSLint reports that this is a valid JSON, so I wonder why Qooxdoo doesn't parse it correctly.

  Read the article

• How to handle Lightbox with Capybara , Selenium and Cucumber framework?

  - by Sushil

  Im trying to run test suite that will handle the jquery light-box. Light box contains a text-area and a submit button. Before Light box appears both of these fields are hidden. But selenium framework not understanding the visibility of these element in Light box. It just shows following error. And I fill comment box with "Text !!" # features/step_definitions/web_steps.rb:333 Element is not currently visible and so may not be interacted with (Selenium::WebDriver::Error::ElementNotVisibleError) [remote server] file:///tmp/webdriver-profile20120403-6182-1rd9z23/extensions/[email protected]/components/command_processor.js:9509:in `unknown' [remote server] file:///tmp/webdriver-profile20120403-6182-1rd9z23/extensions/[email protected]/components/command_processor.js:10510:in `unknown' [remote server] file:///tmp/webdriver-profile20120403-6182-1rd9z23/extensions/[email protected]/components/command_processor.js:10529:in `unknown' [remote server] file:///tmp/webdriver-profile20120403-6182-1rd9z23/extensions/[email protected]/components/command_processor.js:10534:in `unknown' [remote server] file:///tmp/webdriver-profile20120403-6182-1rd9z23/extensions/[email protected]/components/command_processor.js:10482:in `unknown' (eval):2:in `send' (eval):2:in `fill_in' ./features/step_definitions/web_steps.rb:335:in `/^I fill comment box with "([^"]*)"$/' features/courses_flow.feature:21:in `And I fill comment box with "Text !!"'

  Read the article

• Errors when connecting to HTTPS using HTTP::Net routines (Ruby on Rails)

  - by jaycode

  Hi all, the code below explains the problem in detail #this returns error Net::HTTPBadResponse url = URI.parse('https://sitename.com') response = Net::HTTP.start(url.host, url.port) {|http| http.get('/remote/register_device') } #this works url = URI.parse('http://sitename.com') response = Net::HTTP.start(url.host, url.port) {|http| http.get('/remote/register_device') } #this returns error Net::HTTPBadResponse response = Net::HTTP.post_form(URI.parse('https://sitename.com/remote/register_device'), {:text => 'hello world'}) #this returns error Errno::ECONNRESET (Connection reset by peer) response = Net::HTTP.post_form(URI.parse('https://sandbox.itunes.apple.com/verifyReceipt'), {:text => 'hello world'}) #this works response = Net::HTTP.post_form(URI.parse('http://sitename.com/remote/register_device'), {:text => 'hello world'}) So... how do I send POST parameters to https://sitename.com or https://sandbox.itunes.apple.com/verifyReceipt in this example? Further information, I am trying to get this working in Rails: http://developer.apple.com/iphone/library/documentation/NetworkingInternet/Conceptual/StoreKitGuide/VerifyingStoreReceipts/VerifyingStoreReceipts.html#//apple_ref/doc/uid/TP40008267-CH104-SW1

  Read the article

• IE won't start session from an iframe?..

  - by jayarjo

  The task was to bypass login form on remote server with a session_id acquired through a call to server's web API. So that user wouldn't have to login twice. Since there's no way to set cookies for different domain. What we came up to was - put a little file on remote server, to which we pass encrypted session_id from hidden iframe and which is supposed to start a proper session for a remote app, which is then loaded in another iframe. This approach works fine in FF/Chrome, but not IE... However if I copy url to self-made remote authorization script from iframe's src attribute to to IE's address bar and load it from there, session get's created as expected. But for some reason it just doesn't want to do the same from an iframe. Does anyone have any clue, why this is happening?

  Read the article

• jQuery bind efficiency

  - by chelfers

  I'm having issue with load speed using multiple jQuery binds on a couple thousands elements and inputs, is there a more efficient way of doing this? The site has the ability to switch between product lists via ajax calls, the page cannot refresh. Some lists have 10 items, some 100, some over 2000. The issue of speed arises when I start flipping between the lists; each time the 2000+ item list is loaded the system drags for about 10 seconds. Before I rebuild the list I am setting the target element's html to '', and unbinding the two bindings below. I'm sure it has something to do with all the parent, next, and child calls I am doing in the callbacks. Any help is much appreciated. loop 2500 times <ul> <li><input type="text" class="product-code" /></li> <li>PROD-CODE</li> ... <li>PRICE</li> </ul> end loop $('li.product-code').bind( 'click', function(event){ selector = '#p-'+ $(this).prev('li').children('input').attr('lm'); $(selector).val( ( $(selector).val() == '' ? 1 : ( parseFloat( $(selector).val() ) + 1 ) ) ); Remote.Cart.lastProduct = selector; Remote.Cart.Products.Push( Remote.Cart.customerKey, { code : $(this).prev('li').children('input').attr('code'), title : $(this).next('li').html(), quantity : $('#p-'+ $(this).prev('li').children('input').attr('lm') ).val(), price : $(this).prev('li').children('input').attr('price'), weight : $(this).prev('li').children('input').attr('weight'), taxable : $(this).prev('li').children('input').attr('taxable'), productId : $(this).prev('li').children('input').attr('productId'), links : $(this).prev('li').children('input').attr('productLinks') }, '#p-'+ $(this).prev('li').children('input').attr('lm'), false, ( parseFloat($(selector).val()) - 1 ) ); return false; }); $('input.product-qty').bind( 'keyup', function(){ Remote.Cart.lastProduct = '#p-'+ $(this).attr('lm'); Remote.Cart.Products.Push( Remote.Cart.customerKey, { code : $(this).attr('code') , title : $(this).parent().next('li').next('li').html(), quantity : $(this).val(), price : $(this).attr('price'), weight : $(this).attr('weight'), taxable : $(this).attr('taxable'), productId : $(this).attr('productId'), links : $(this).attr('productLinks') }, '#p-'+ $(this).attr('lm'), false, previousValue ); });

  Read the article

< Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >